[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
[    0.000000]  BIOS-e820: 000000001bef0000 - 000000001befa000 (ACPI data)
[    0.000000]  BIOS-e820: 000000001befa000 - 000000001bf00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001bf00000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.000000] DMI present.
[    0.000000] DMI: Acer, inc. Aspire 3000     /Lugano M        , BIOS 3A21 06/10/05
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x1bef0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D5FFF write-protect
[    0.000000]   D6000-DBFFF uncachable
[    0.000000]   DC000-E3FFF write-back
[    0.000000]   E4000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFE0000000 write-back
[    0.000000]   1 base 001C000000 mask FFFC000000 uncachable
[    0.000000]   2 base 00E0000000 mask FFFE000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [c00f7fd0] f7fd0
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] init_memory_mapping: 0000000000000000-000000001bef0000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 001bc00000 page 2M
[    0.000000]  001bc00000 - 001bef0000 page 4k
[    0.000000] kernel direct mapping tables up to 1bef0000 @ 1bfb000-1c00000
[    0.000000] RAMDISK: 1ab4e000 - 1b789000
[    0.000000] ACPI: RSDP 000f7f60 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 1bef619d 00034 (v01 PTLTD    RSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 1bef9e3e 00074 (v01 SiS    755F     06040000 PTL  000F4240)
[    0.000000] ACPI: DSDT 1bef61d1 03C6D (v01 PTLTD       755 06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 1befafc0 00040
[    0.000000] ACPI: SSDT 1bef9eb2 000D6 (v01 PTLTD  POWERNOW 06040000  LTP 00000001)
[    0.000000] ACPI: APIC 1bef9f88 00050 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 1bef9fd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 446MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 1bef0000
[    0.000000]   low ram: 0 - 1bef0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0001bef0
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0001bef0
[    0.000000] On node 0 totalpages: 114303
[    0.000000] free_area_init_node: node 0, pgdat c1784100, node_mem_map dbb6f200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 862 pages used for memmap
[    0.000000]   Normal zone: 109458 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dff00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @da400000 s28800 r0 d24448 u4194304
[    0.000000] pcpu-alloc: s28800 r0 d24448 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113409
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=e1918598-95fe-4320-bed2-387169adeda9 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2288000 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 429032k/457664k available (5188k kernel code, 28180k reserved, 2540k data, 700k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xdc6f0000 - 0xff7fe000   ( 561 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdbef0000   ( 446 MB)
[    0.000000]       .init : 0xc178d000 - 0xc183c000   ( 700 kB)
[    0.000000]       .data : 0xc15112a1 - 0xc178c480   (2540 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15112a1   (5188 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=da006000 soft=da008000
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1800.214 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.42 BogoMIPS (lpj=7200856)
[    0.004011] pid_max: default: 32768 minimum: 301
[    0.004049] Security Framework initialized
[    0.004082] AppArmor: AppArmor initialized
[    0.004085] Yama: becoming mindful.
[    0.004170] Mount-cache hash table entries: 512
[    0.008118] Initializing cgroup subsys ns
[    0.008123] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.008129] Initializing cgroup subsys cpuacct
[    0.008136] Initializing cgroup subsys memory
[    0.008149] Initializing cgroup subsys devices
[    0.008154] Initializing cgroup subsys freezer
[    0.008157] Initializing cgroup subsys net_cls
[    0.008161] Initializing cgroup subsys blkio
[    0.008207] mce: CPU supports 5 MCE banks
[    0.009019] SMP alternatives: switching to UP code
[    0.018357] Freeing SMP alternatives: 20k freed
[    0.018386] ACPI: Core revision 20110112
[    0.024032] ftrace: allocating 23640 entries in 47 pages
[    0.028115] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.028458] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068458] CPU0: Mobile AMD Sempron(tm) Processor 3000+ stepping 00
[    0.072003] Performance Events: AMD PMU driver.
[    0.072003] ... version:                0
[    0.072003] ... bit width:              48
[    0.072003] ... generic registers:      4
[    0.072003] ... value mask:             0000ffffffffffff
[    0.072003] ... max period:             00007fffffffffff
[    0.072003] ... fixed-purpose events:   0
[    0.072003] ... event mask:             000000000000000f
[    0.072003] Brought up 1 CPUs
[    0.072003] Total of 1 processors activated (3600.42 BogoMIPS).
[    0.072003] devtmpfs: initialized
[    0.072003] print_constraints: dummy: 
[    0.072003] Time:  3:10:42  Date: 04/19/11
[    0.072003] NET: Registered protocol family 16
[    0.072003] EISA bus registered
[    0.072003] node 0 link 0: io port [0, fffff]
[    0.072003] TOM: 0000000020000000 aka 512M
[    0.072003] node 0 link 0: mmio [a0000, bffff]
[    0.072003] node 0 link 0: mmio [20000000, fe0bffff]
[    0.072003] bus: [00, ff] on node 0 link 0
[    0.072003] bus: 00 index 0 [io  0x0000-0xffff]
[    0.072003] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[    0.072003] bus: 00 index 2 [mem 0x20000000-0xffffffff]
[    0.072003] ACPI: bus type pci registered
[    0.072003] PCI: PCI BIOS revision 2.10 entry at 0xfd776, last bus=1
[    0.072003] PCI: Using configuration type 1 for base access
[    0.072406] bio: create slab <bio-0> at 0
[    0.073342] ACPI: EC: Look up EC in DSDT
[    0.088066] ACPI: Interpreter enabled
[    0.088073] ACPI: (supports S0 S3 S4 S5)
[    0.088093] ACPI: Using IOAPIC for interrupt routing
[    0.090586] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.090688] ACPI: No dock devices found.
[    0.090691] HEST: Table not found.
[    0.090696] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.092464] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.093806] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.093811] pci_root PNP0A03:00: host bridge window [mem 0x000d6000-0x000d7fff] (ignored)
[    0.093815] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000d9fff] (ignored)
[    0.093818] pci_root PNP0A03:00: host bridge window [mem 0x000da000-0x000dbfff] (ignored)
[    0.093822] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffffffff] (ignored)
[    0.093826] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.093829] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.093849] pci 0000:00:00.0: [1039:0760] type 0 class 0x000600
[    0.093858] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xe1ffffff]
[    0.093910] pci 0000:00:01.0: [1039:0002] type 1 class 0x000604
[    0.093938] pci 0000:00:02.0: [1039:0008] type 0 class 0x000601
[    0.093980] pci 0000:00:02.0: Enabling SiS 96x SMBus
[    0.093994] pci 0000:00:02.1: [1039:0016] type 0 class 0x000c05
[    0.094023] pci 0000:00:02.1: reg 20: [io  0x8100-0x811f]
[    0.094050] pci 0000:00:02.5: [1039:5513] type 0 class 0x000101
[    0.094070] pci 0000:00:02.5: reg 10: [io  0x01f0-0x01f7]
[    0.094077] pci 0000:00:02.5: reg 14: [io  0x03f4-0x03f7]
[    0.094084] pci 0000:00:02.5: reg 18: [io  0x0170-0x0177]
[    0.094092] pci 0000:00:02.5: reg 1c: [io  0x0374-0x0377]
[    0.094099] pci 0000:00:02.5: reg 20: [io  0x2000-0x200f]
[    0.094127] pci 0000:00:02.6: [1039:7013] type 0 class 0x000703
[    0.094139] pci 0000:00:02.6: reg 10: [io  0x1000-0x10ff]
[    0.094147] pci 0000:00:02.6: reg 14: [io  0x1c00-0x1c7f]
[    0.094185] pci 0000:00:02.6: supports D1 D2
[    0.094188] pci 0000:00:02.6: PME# supported from D3hot D3cold
[    0.094192] pci 0000:00:02.6: PME# disabled
[    0.094206] pci 0000:00:02.7: [1039:7012] type 0 class 0x000401
[    0.094219] pci 0000:00:02.7: reg 10: [io  0x1400-0x14ff]
[    0.094226] pci 0000:00:02.7: reg 14: [io  0x1c80-0x1cff]
[    0.094263] pci 0000:00:02.7: supports D1 D2
[    0.094266] pci 0000:00:02.7: PME# supported from D3hot D3cold
[    0.094270] pci 0000:00:02.7: PME# disabled
[    0.094283] pci 0000:00:03.0: [1039:7001] type 0 class 0x000c03
[    0.094292] pci 0000:00:03.0: reg 10: [mem 0xe2002000-0xe2002fff]
[    0.094332] pci 0000:00:03.1: [1039:7001] type 0 class 0x000c03
[    0.094342] pci 0000:00:03.1: reg 10: [mem 0xe2003000-0xe2003fff]
[    0.094384] pci 0000:00:03.2: [1039:7002] type 0 class 0x000c03
[    0.094395] pci 0000:00:03.2: reg 10: [mem 0xe2004000-0xe2004fff]
[    0.094434] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[    0.094438] pci 0000:00:03.2: PME# disabled
[    0.094456] pci 0000:00:04.0: [1039:0900] type 0 class 0x000200
[    0.094468] pci 0000:00:04.0: reg 10: [io  0x1800-0x18ff]
[    0.094476] pci 0000:00:04.0: reg 14: [mem 0xe2005000-0xe2005fff]
[    0.094503] pci 0000:00:04.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.094517] pci 0000:00:04.0: supports D1 D2
[    0.094519] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.094523] pci 0000:00:04.0: PME# disabled
[    0.094539] pci 0000:00:06.0: [104c:ac50] type 2 class 0x000607
[    0.094552] pci 0000:00:06.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.094566] pci 0000:00:06.0: supports D1 D2
[    0.094568] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.094573] pci 0000:00:06.0: PME# disabled
[    0.094588] pci 0000:00:0b.0: [14e4:4318] type 0 class 0x000280
[    0.094598] pci 0000:00:0b.0: reg 10: [mem 0xe2000000-0xe2001fff]
[    0.094648] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[    0.094667] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[    0.094685] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[    0.094701] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[    0.094721] PCI: peer root bus 00 res updated from pci conf
[    0.094739] pci 0000:01:00.0: [1039:6330] type 0 class 0x000300
[    0.094748] pci 0000:01:00.0: reg 10: [mem 0xe8000000-0xefffffff pref]
[    0.094754] pci 0000:01:00.0: reg 14: [mem 0xe2100000-0xe211ffff]
[    0.094759] pci 0000:01:00.0: reg 18: [io  0xa000-0xa07f]
[    0.094778] pci 0000:01:00.0: supports D1 D2
[    0.094796] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.094800] pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
[    0.094805] pci 0000:00:01.0:   bridge window [mem 0xe2100000-0xe21fffff]
[    0.094810] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xefffffff pref]
[    0.094840] pci_bus 0000:00: on NUMA node 0
[    0.094844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.100598] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11)
[    0.100659] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11)
[    0.100713] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11)
[    0.100767] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
[    0.100834] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
[    0.100888] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
[    0.100938] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[    0.100988] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11)
[    0.101139] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.101143] vgaarb: loaded
[    0.101429] SCSI subsystem initialized
[    0.101520] libata version 3.00 loaded.
[    0.101600] usbcore: registered new interface driver usbfs
[    0.101616] usbcore: registered new interface driver hub
[    0.101647] usbcore: registered new device driver usb
[    0.101788] wmi: Mapper loaded
[    0.101791] PCI: Using ACPI for IRQ routing
[    0.101796] PCI: pci_cache_line_size set to 64 bytes
[    0.101856] reserve RAM buffer: 000000000009f400 - 000000000009ffff 
[    0.101859] reserve RAM buffer: 000000001bef0000 - 000000001bffffff 
[    0.102003] NetLabel: Initializing
[    0.102006] NetLabel:  domain hash size = 128
[    0.102008] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.102022] NetLabel:  unlabeled traffic allowed by default
[    0.111885] AppArmor: AppArmor Filesystem Enabled
[    0.111931] pnp: PnP ACPI init
[    0.111968] ACPI: bus type pnp registered
[    0.112687] pnp 00:00: [bus 00-ff]
[    0.112692] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.112695] pnp 00:00: [mem 0x000c0000-0x000c1fff window]
[    0.112698] pnp 00:00: [mem 0x000c2000-0x000c3fff window]
[    0.112701] pnp 00:00: [mem 0x000c4000-0x000c5fff window]
[    0.112705] pnp 00:00: [mem 0x000c6000-0x000c7fff window]
[    0.112708] pnp 00:00: [mem 0x000c8000-0x000c9fff window]
[    0.112711] pnp 00:00: [mem 0x000ca000-0x000cbfff window]
[    0.112714] pnp 00:00: [mem 0x000cc000-0x000cdfff window]
[    0.112717] pnp 00:00: [mem 0x000ce000-0x000cffff window]
[    0.112720] pnp 00:00: [mem 0x000d0000-0x000d1fff window]
[    0.112723] pnp 00:00: [mem 0x000d2000-0x000d3fff window]
[    0.112730] pnp 00:00: [mem 0x000d4000-0x000d5fff window]
[    0.112733] pnp 00:00: [mem 0x000d6000-0x000d7fff window]
[    0.112736] pnp 00:00: [mem 0x000d8000-0x000d9fff window]
[    0.112739] pnp 00:00: [mem 0x000da000-0x000dbfff window]
[    0.112742] pnp 00:00: [mem 0x000dc000-0x000ddfff window]
[    0.112745] pnp 00:00: [mem 0x000de000-0x000dffff window]
[    0.112748] pnp 00:00: [mem 0x000e0000-0x000e1fff window]
[    0.112751] pnp 00:00: [mem 0x000e2000-0x000e3fff window]
[    0.112754] pnp 00:00: [mem 0x000e4000-0x000e5fff window]
[    0.112757] pnp 00:00: [mem 0x000e6000-0x000e7fff window]
[    0.112760] pnp 00:00: [mem 0x000e8000-0x000e9fff window]
[    0.112763] pnp 00:00: [mem 0x000ea000-0x000ebfff window]
[    0.112766] pnp 00:00: [mem 0x000ec000-0x000edfff window]
[    0.112769] pnp 00:00: [mem 0x000ee000-0x000effff window]
[    0.112773] pnp 00:00: [mem 0x20000000-0xffffffff window]
[    0.112776] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.112779] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.112782] pnp 00:00: [io  0x0d00-0xffff window]
[    0.112842] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.112881] pnp 00:01: [io  0x0000-0x000f]
[    0.112884] pnp 00:01: [io  0x0081-0x008f]
[    0.112886] pnp 00:01: [io  0x00c0-0x00df]
[    0.112889] pnp 00:01: [io  0x0480-0x048f]
[    0.112892] pnp 00:01: [dma 4]
[    0.112924] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.112939] pnp 00:02: [io  0x0070-0x0071]
[    0.112955] pnp 00:02: [irq 8]
[    0.112994] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.113005] pnp 00:03: [io  0x0061]
[    0.113037] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.113094] pnp 00:04: [io  0x8000-0x807f]
[    0.113097] pnp 00:04: [io  0x8080-0x80ff]
[    0.113099] pnp 00:04: [io  0x8100-0x811f]
[    0.113102] pnp 00:04: [io  0x0080]
[    0.113105] pnp 00:04: [io  0x04d0-0x04d1]
[    0.113107] pnp 00:04: [io  0x002e]
[    0.113110] pnp 00:04: [io  0x002f]
[    0.113112] pnp 00:04: [io  0x0068-0x006f]
[    0.113115] pnp 00:04: [io  0x0092]
[    0.113117] pnp 00:04: [io  0x03f0-0x03f1]
[    0.113120] pnp 00:04: [mem 0xfec00000-0xfecfffff]
[    0.113123] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.113126] pnp 00:04: [mem 0xfee00000-0xfeefffff]
[    0.113129] pnp 00:04: [mem 0xffc00000-0xffc00fff]
[    0.113132] pnp 00:04: [mem 0xffe00000-0xffe00fff]
[    0.113135] pnp 00:04: [mem 0xffe80000-0xffefffff]
[    0.113138] pnp 00:04: [mem 0xfffe0000-0xfffeffff]
[    0.113140] pnp 00:04: [mem 0xffff0000-0xffffffff]
[    0.113144] pnp 00:04: [mem 0x00000000-0xffffffff disabled]
[    0.113224] system 00:04: [io  0x8000-0x807f] has been reserved
[    0.113227] system 00:04: [io  0x8080-0x80ff] has been reserved
[    0.113231] system 00:04: [io  0x8100-0x811f] has been reserved
[    0.113235] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.113239] system 00:04: [io  0x03f0-0x03f1] has been reserved
[    0.113243] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.113247] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.113251] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.113255] system 00:04: [mem 0xffc00000-0xffc00fff] has been reserved
[    0.113259] system 00:04: [mem 0xffe00000-0xffe00fff] has been reserved
[    0.113263] system 00:04: [mem 0xffe80000-0xffefffff] has been reserved
[    0.113267] system 00:04: [mem 0xfffe0000-0xfffeffff] has been reserved
[    0.113271] system 00:04: [mem 0xffff0000-0xffffffff] has been reserved
[    0.113275] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.113294] pnp 00:05: [io  0x00f0-0x00ff]
[    0.113303] pnp 00:05: [irq 13]
[    0.113337] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.113348] pnp 00:06: [io  0x0060]
[    0.113351] pnp 00:06: [io  0x0064]
[    0.113357] pnp 00:06: [irq 1]
[    0.113391] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.113406] pnp 00:07: [irq 12]
[    0.113446] pnp 00:07: Plug and Play ACPI device, IDs SYN1003 SYN1002 SYN1000 PNP0f13 (active)
[    0.113599] pnp: PnP ACPI: found 8 devices
[    0.113601] ACPI: ACPI bus type pnp unregistered
[    0.113605] PnPBIOS: Disabled by ACPI PNP
[    0.150350] Switching to clocksource acpi_pm
[    0.150407] pci 0000:00:06.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
[    0.150412] pci 0000:00:06.0: BAR 16: assigned [mem 0x24000000-0x27ffffff]
[    0.150416] pci 0000:00:04.0: BAR 6: assigned [mem 0x28000000-0x2801ffff pref]
[    0.150422] pci 0000:00:06.0: BAR 0: assigned [mem 0x28020000-0x28020fff]
[    0.150428] pci 0000:00:06.0: BAR 0: set to [mem 0x28020000-0x28020fff] (PCI address [0x28020000-0x28020fff])
[    0.150435] pci 0000:00:06.0: BAR 13: assigned [io  0x2400-0x24ff]
[    0.150439] pci 0000:00:06.0: BAR 14: assigned [io  0x2800-0x28ff]
[    0.150443] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.150447] pci 0000:00:01.0:   bridge window [io  0xa000-0xafff]
[    0.150452] pci 0000:00:01.0:   bridge window [mem 0xe2100000-0xe21fffff]
[    0.150457] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xefffffff pref]
[    0.150463] pci 0000:00:06.0: CardBus bridge to [bus 02-05]
[    0.150466] pci 0000:00:06.0:   bridge window [io  0x2400-0x24ff]
[    0.150470] pci 0000:00:06.0:   bridge window [io  0x2800-0x28ff]
[    0.150475] pci 0000:00:06.0:   bridge window [mem 0x20000000-0x23ffffff pref]
[    0.150480] pci 0000:00:06.0:   bridge window [mem 0x24000000-0x27ffffff]
[    0.150494] pci 0000:00:06.0: enabling device (0000 -> 0003)
[    0.150517] pci 0000:00:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    0.150523] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.150526] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.150530] pci_bus 0000:00: resource 6 [mem 0x20000000-0xffffffff]
[    0.150533] pci_bus 0000:01: resource 0 [io  0xa000-0xafff]
[    0.150536] pci_bus 0000:01: resource 1 [mem 0xe2100000-0xe21fffff]
[    0.150540] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xefffffff pref]
[    0.150543] pci_bus 0000:02: resource 0 [io  0x2400-0x24ff]
[    0.150546] pci_bus 0000:02: resource 1 [io  0x2800-0x28ff]
[    0.150549] pci_bus 0000:02: resource 2 [mem 0x20000000-0x23ffffff pref]
[    0.150553] pci_bus 0000:02: resource 3 [mem 0x24000000-0x27ffffff]
[    0.150603] NET: Registered protocol family 2
[    0.150679] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.150943] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.151057] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[    0.151206] TCP: Hash tables configured (established 16384 bind 16384)
[    0.151209] TCP reno registered
[    0.151214] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.151226] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.151338] NET: Registered protocol family 1
[    0.351337] Switched to NOHz mode on CPU #0
[    0.553679] pci 0000:01:00.0: Boot video device
[    0.553682] PCI: CLS 0 bytes, default 64
[    0.553774] Simple Boot Flag at 0x38 set to 0x1
[    0.553960] cpufreq-nforce2: No nForce2 chipset.
[    0.554140] audit: initializing netlink socket (disabled)
[    0.554162] type=2000 audit(1303182642.552:1): initialized
[    0.566691] Trying to unpack rootfs image as initramfs...
[    0.584540] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.590176] VFS: Disk quotas dquot_6.5.2
[    0.590257] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.596511] fuse init (API version 7.16)
[    0.596670] msgmni has been set to 837
[    0.600509] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.604451] io scheduler noop registered
[    0.604456] io scheduler deadline registered
[    0.604508] io scheduler cfq registered (default)
[    0.604704] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.604745] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.606061] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.607771] ACPI: AC Adapter [ACAD] (on-line)
[    0.607887] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[    0.609148] ACPI: Lid Switch [LID]
[    0.609246] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.609253] ACPI: Power Button [PWRB]
[    0.609313] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[    0.609317] ACPI: Sleep Button [SLPB]
[    0.609370] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.609374] ACPI: Power Button [PWRF]
[    0.609509] ACPI: acpi_idle registered with cpuidle
[    0.609544] Marking TSC unstable due to TSC halts in idle
[    0.617208] thermal LNXTHERM:00: registered as thermal_zone0
[    0.617214] ACPI: Thermal Zone [THRM] (84 C)
[    0.617277] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    0.617333] ERST: Table is not found!
[    0.617467] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.618790] serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.618799] serial 0000:00:02.6: PCI INT C disabled
[    0.619002] Linux agpgart interface v0.103
[    0.619034] agpgart-amd64 0000:00:00.0: AGP bridge [1039/0760]
[    0.624274] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xe0000000
[    0.625803] brd: module loaded
[    0.626521] loop: module loaded
[    0.626681] i2c-core: driver [adp5520] using legacy suspend method
[    0.626683] i2c-core: driver [adp5520] using legacy resume method
[    0.626854] pata_sis 0000:00:02.5: version 0.5.2
[    0.626887] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.627432] ACPI: Battery Slot [BAT1] (battery absent)
[    0.627457] isapnp: Scanning for PnP cards...
[    0.632961] scsi0 : pata_sis
[    0.679914] scsi1 : pata_sis
[    0.680156] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14
[    0.680160] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15
[    0.680706] Fixed MDIO Bus: probed
[    0.680761] PPP generic driver version 2.4.2
[    0.680852] tun: Universal TUN/TAP device driver, 1.6
[    0.680854] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.680976] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.681024] ehci_hcd 0000:00:03.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.681047] ehci_hcd 0000:00:03.2: EHCI Host Controller
[    0.681114] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
[    0.681159] ehci_hcd 0000:00:03.2: cache line size of 64 is not supported
[    0.681182] ehci_hcd 0000:00:03.2: irq 23, io mem 0xe2004000
[    0.692198] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
[    0.692434] hub 1-0:1.0: USB hub found
[    0.692441] hub 1-0:1.0: 6 ports detected
[    0.692541] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.692583] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.692605] ohci_hcd 0000:00:03.0: OHCI Host Controller
[    0.692672] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[    0.692711] ohci_hcd 0000:00:03.0: irq 20, io mem 0xe2002000
[    0.767852] hub 2-0:1.0: USB hub found
[    0.767861] hub 2-0:1.0: 3 ports detected
[    0.767969] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.767990] ohci_hcd 0000:00:03.1: OHCI Host Controller
[    0.788408] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[    0.788455] ohci_hcd 0000:00:03.1: irq 21, io mem 0xe2003000
[    0.844646] hub 3-0:1.0: USB hub found
[    0.844655] hub 3-0:1.0: 3 ports detected
[    0.844753] uhci_hcd: USB Universal Host Controller Interface driver
[    0.844867] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.847240] ata1.00: ATA-6: ST960821A, 3.01, max UDMA/100
[    0.847243] ata1.00: 117210240 sectors, multi 16: LBA48 
[    0.847699] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.847705] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.847886] mousedev: PS/2 mouse device common for all mice
[    0.848146] rtc_cmos 00:02: RTC can wake from S4
[    0.848202] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.848232] rtc0: alarms up to one year, y3k, 114 bytes nvram
[    0.848353] device-mapper: uevent: version 1.0.3
[    0.848457] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    0.852384] device-mapper: multipath: version 1.2.0 loaded
[    0.852391] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.852542] EISA: Probing bus 0 at eisa.0
[    0.852546] EISA: Cannot allocate resource for mainboard
[    0.852549] Cannot allocate resource for EISA slot 1
[    0.852552] Cannot allocate resource for EISA slot 2
[    0.852555] Cannot allocate resource for EISA slot 3
[    0.852558] Cannot allocate resource for EISA slot 4
[    0.852560] Cannot allocate resource for EISA slot 5
[    0.852563] Cannot allocate resource for EISA slot 6
[    0.852566] Cannot allocate resource for EISA slot 7
[    0.852569] Cannot allocate resource for EISA slot 8
[    0.852571] EISA: Detected 0 cards.
[    0.855132] cpuidle: using governor ladder
[    0.855202] cpuidle: using governor menu
[    0.855556] TCP cubic registered
[    0.855719] NET: Registered protocol family 10
[    0.856482] NET: Registered protocol family 17
[    0.856521] Registering the dns_resolver key type
[    0.856554] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3000+ (1 cpu cores) (version 2.20.00)
[    0.856609] powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x8
[    0.856612] powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0xa
[    0.856615] powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x13
[    0.856666] Using IPI No-Shortcut mode
[    0.856814] PM: Hibernation image not present or could not be loaded.
[    0.856834] registered taskstats version 1
[    0.857003]   Magic number: 7:346:159
[    0.857104] rtc_cmos 00:02: setting system clock to 2011-04-19 03:10:43 UTC (1303182643)
[    0.857108] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.857110] EDD information not available.
[    0.860991] ata1.00: configured for UDMA/100
[    0.888167] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.195980] isapnp: No Plug & Play device found
[    1.196186] scsi 0:0:0:0: Direct-Access     ATA      ST960821A        3.01 PQ: 0 ANSI: 5
[    1.196431] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.196658] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    1.196718] sd 0:0:0:0: [sda] Write Protect is off
[    1.196723] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.196748] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.240590]  sda: sda1 sda2 < sda5 sda6 >
[    1.241090] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.343010] Freeing initrd memory: 12524k freed
[    1.358567] ata2.00: ATAPI: Slimtype COMBO SOSC-2483K, KCK2, max UDMA/33
[    1.372212] ata2.00: configured for UDMA/33
[    1.373125] scsi 1:0:0:0: CD-ROM            Slimtype COMBO SOSC-2483K KCK2 PQ: 0 ANSI: 5
[    1.374624] sr0: scsi3-mmc drive: 0x/24x writer cd/rw xa/form2 cdda tray
[    1.374629] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.374803] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.374896] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.374991] Freeing unused kernel memory: 700k freed
[    1.375791] Write protecting the kernel text: 5192k
[    1.375834] Write protecting the kernel read-only data: 2148k
[    1.413447] <30>udev[64]: starting version 167
[    1.468063] usb 2-2: new low speed USB device using ohci_hcd and address 2
[    1.698552] sis900.c: v1.08.10 Apr. 2 2006
[    1.698595] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.726804] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13.
[    1.732666] 0000:00:04.0: Using transceiver found at address 13 as default
[    1.788844] eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 19, 00:c0:9f:a6:d6:08
[    1.788902] b43-pci-bridge 0000:00:0b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.808182] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[    1.808191] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[    1.808198] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[    1.808203] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[    1.832145] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input5
[    1.832479] generic-usb 0003:045E:0053.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:03.0-2/input0
[    1.832795] usbcore: registered new interface driver usbhid
[    1.832801] usbhid: USB HID core driver
[    1.848100] ssb: Sonics Silicon Backplane found on PCI device 0000:00:0b.0
[    1.988046] usb 3-2: new full speed USB device using ohci_hcd and address 2
[    2.317191] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    2.317197] EXT4-fs (sda1): write access will be enabled during recovery
[    7.142293] EXT4-fs (sda1): orphan cleanup on readonly fs
[    7.142307] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2105263
[    7.142420] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2105262
[    7.142430] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2105261
[    7.142439] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2105260
[    7.142447] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2105259
[    7.142457] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2103363
[    7.142466] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2103353
[    7.142483] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 2103352
[    7.142496] EXT4-fs (sda1): 8 orphan inodes deleted
[    7.142499] EXT4-fs (sda1): recovery complete
[    8.058889] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   27.152409] <30>udev[255]: starting version 167
[   27.236827] lp: driver loaded but no devices found
[   27.261690] Adding 1963004k swap on /dev/sda6.  Priority:-1 extents:1 across:1963004k 
[   27.556278] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   27.579189] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
[   27.682357] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   27.781068] type=1400 audit(1303182670.421:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=413 comm="apparmor_parser"
[   27.781580] type=1400 audit(1303182670.421:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=413 comm="apparmor_parser"
[   27.781894] type=1400 audit(1303182670.421:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=413 comm="apparmor_parser"
[   27.897478] input: Wacom Intuos 6x8 as /devices/pci0000:00/0000:00:03.1/usb3/3-2/3-2:1.0/input/input6
[   28.005582] usbcore: registered new interface driver wacom
[   28.005587] wacom: v1.52:USB Wacom tablet driver
[   28.007338] yenta_cardbus 0000:00:06.0: CardBus bridge found [1025:0083]
[   28.007355] yenta_cardbus 0000:00:06.0: Using CSCINT to route CSC interrupts to PCI
[   28.007359] yenta_cardbus 0000:00:06.0: Routing CardBus interrupts to PCI
[   28.007365] yenta_cardbus 0000:00:06.0: TI: mfunc 0x00521d22, devctl 0x64
[   28.237306] yenta_cardbus 0000:00:06.0: ISA IRQ mask 0x06f8, PCI irq 19
[   28.237312] yenta_cardbus 0000:00:06.0: Socket status: 30000006
[   28.314747] cfg80211: Calling CRDA to update world regulatory domain
[   28.661106] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000/0x0
[   28.697650] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   28.720505] cfg80211: World regulatory domain updated:
[   28.720511] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   28.720516] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.720520] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   28.720523] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   28.720526] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.720530] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   28.750241] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[   28.751864] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x480-0x48f 0x4d0-0x4d7
[   28.752604] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   28.753180] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[   28.753814] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xfffff
[   28.753867] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[   28.753922] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[   28.753979] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   28.789592] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[   28.851603] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   28.856310] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   28.856316] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   28.856320] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   28.856324] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   28.856327] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   28.856331] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   28.856334] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   28.856337] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   28.856340] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   28.856344] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   28.856347] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   28.856350] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   28.856353] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   28.856357] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   28.856360] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   28.856363] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   28.856366] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   28.856370] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   28.856373] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   28.856376] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   28.856379] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   28.856383] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[   28.856386] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   28.856389] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   28.856392] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   28.856396] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[   28.856399] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   28.856403] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[   28.869132] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   28.869901] Registered led device: b43-phy0::tx
[   28.869929] Registered led device: b43-phy0::rx
[   28.869959] Registered led device: b43-phy0::radio
[   28.869981] Broadcom 43xx driver loaded [ Features: PNL, Firmware-ID: FW13 ]
[   29.676035] intel8x0_measure_ac97_clock: measured 55438 usecs (2667 samples)
[   29.676041] intel8x0: clocking to 48000
[   29.769281] vesafb: framebuffer at 0xe8000000, mapped to 0xdca00000, using 1216k, total 1216k
[   29.769288] vesafb: mode is 640x480x32, linelength=2560, pages=0
[   29.769291] vesafb: scrolling: redraw
[   29.769295] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[   29.769526] Console: switching to colour frame buffer device 80x30
[   29.769546] fb0: VESA VGA frame buffer device
[   38.788801] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   39.989753] ppdev: user-space parallel port driver
[   40.091991] type=1400 audit(1303182682.729:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=703 comm="apparmor_parser"
[   40.110113] type=1400 audit(1303182682.749:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=701 comm="apparmor_parser"
[   40.110785] type=1400 audit(1303182682.749:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=701 comm="apparmor_parser"
[   40.120567] type=1400 audit(1303182682.761:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=705 comm="apparmor_parser"
[   40.136315] type=1400 audit(1303182682.777:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=705 comm="apparmor_parser"
[   40.136629] type=1400 audit(1303182682.777:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=705 comm="apparmor_parser"
[   40.181767] type=1400 audit(1303182682.821:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=710 comm="apparmor_parser"
[   40.216305] type=1400 audit(1303182682.857:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=710 comm="apparmor_parser"
[   40.236058] type=1400 audit(1303182682.877:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=710 comm="apparmor_parser"
[   40.265653] type=1400 audit(1303182682.905:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=715 comm="apparmor_parser"
[   40.500290] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   40.612989] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[   40.612995] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
[   40.612999] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.