[   25.400511] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0
[   27.784974] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro,commit=0
[   35.080119] eth0: no IPv6 routers present
[   36.816057] ------------[ cut here ]------------
[   36.816074] WARNING: at /build/buildd/linux-2.6.38/net/sched/sch_generic.c:256 dev_watchdog+0x213/0x220()
[   36.816079] Hardware name: EL464AA-ABA A1324N
[   36.816082] NETDEV WATCHDOG: eth0 (8139too): transmit queue 0 timed out
[   36.816085] Modules linked in: binfmt_misc snd_hda_codec_realtek snd_hda_intel snd_usb_audio snd_hda_codec radeon snd_pcm snd_hwdep snd_usbmidi_lib snd_seq_midi snd_rawmidi ttm ppdev uvcvideo drm_kms_helper snd_seq_midi_event snd_seq drm psmouse snd_timer snd_seq_device videodev snd i2c_algo_bit serio_raw soundcore parport_pc snd_page_alloc shpchp ati_agp i2c_piix4 lp parport usb_storage 8139too firewire_ohci uas 8139cp floppy firewire_core pata_atiixp crc_itu_t sata_sil
[   36.816139] Pid: 0, comm: kworker/0:0 Not tainted 2.6.38-8-generic-pae #42-Ubuntu
[   36.816143] Call Trace:
[   36.816153]  [<c1058ce2>] ? warn_slowpath_common+0x72/0xa0
[   36.816158]  [<c1470653>] ? dev_watchdog+0x213/0x220
[   36.816162]  [<c1470653>] ? dev_watchdog+0x213/0x220
[   36.816168]  [<c1058db3>] ? warn_slowpath_fmt+0x33/0x40
[   36.816172]  [<c1470653>] ? dev_watchdog+0x213/0x220
[   36.816178]  [<c1072b31>] ? __queue_work+0xe1/0x360
[   36.816184]  [<c106606b>] ? call_timer_fn+0x2b/0xe0
[   36.816190]  [<c11336c9>] ? file_free_rcu+0x29/0x30
[   36.816194]  [<c11336c9>] ? file_free_rcu+0x29/0x30
[   36.816199]  [<c1470440>] ? dev_watchdog+0x0/0x220
[   36.816203]  [<c10673a9>] ? run_timer_softirq+0xe9/0x1e0
[   36.816208]  [<c1470440>] ? dev_watchdog+0x0/0x220
[   36.816213]  [<c105f9f2>] ? __do_softirq+0x82/0x170
[   36.816217]  [<c105f970>] ? __do_softirq+0x0/0x170
[   36.816220]  <IRQ>  [<c105fbbd>] ? irq_exit+0x6d/0x80
[   36.816230]  [<c1538a2b>] ? smp_apic_timer_interrupt+0x5b/0x8a
[   36.816237]  [<c15320b9>] ? apic_timer_interrupt+0x31/0x38
[   36.816244]  [<c1012173>] ? mwait_idle+0x73/0x100
[   36.816249]  [<c100944a>] ? cpu_idle+0x8a/0xc0
[   36.816254]  [<c152ca60>] ? setup_APIC_timer+0x69/0x6d
[   36.816258]  [<c152c5a4>] ? start_secondary+0xd5/0xdc
[   36.816262] ---[ end trace 2c2c6f994b0e623c ]---
[   39.824133] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   50.704207] 2:3:3: cannot set freq 16000 to ep 0x86
[   51.704215] 2:3:3: cannot set freq 16000 to ep 0x86
[   51.824350] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   52.704218] 2:3:3: cannot set freq 16000 to ep 0x86
[   53.704231] 2:3:3: cannot set freq 16000 to ep 0x86
[   54.704982] 2:3:3: cannot set freq 16000 to ep 0x86
[   55.068084] ata6.00: qc timeout (cmd 0xa0)
[   55.068101] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   55.068113] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[   55.068135] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[   55.068138]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[   55.068145] ata6.00: status: { DRDY ERR }
[   55.068195] ata6: soft resetting link
[   55.336790] ata6.00: configured for UDMA/33
[   55.352630] ata6.01: configured for UDMA/33
[   55.705504] 2:3:3: cannot set freq 16000 to ep 0x86
[   56.704254] 2:3:3: cannot set freq 16000 to ep 0x86
[   57.704265] 2:3:3: cannot set freq 16000 to ep 0x86
[   58.704144] 2:3:3: cannot set freq 16000 to ep 0x86
[   59.704155] 2:3:3: cannot set freq 16000 to ep 0x86
[   60.352289] ata6.00: qc timeout (cmd 0xa0)
[   60.352297] ata6.00: TEST_UNIT_READY failed (err_mask=0x5)
[   60.352341] ata6: soft resetting link
[   60.621144] ata6.00: configured for UDMA/33
[   60.636612] ata6.01: configured for UDMA/33
[   60.776165] 2:3:3: cannot set freq 16000 to ep 0x86
[   61.776175] 2:3:3: cannot set freq 16000 to ep 0x86
[   62.776182] 2:3:3: cannot set freq 16000 to ep 0x86
[   63.776192] 2:3:3: cannot set freq 16000 to ep 0x86
[   64.776199] 2:3:3: cannot set freq 16000 to ep 0x86
[   65.636152] ata6.00: qc timeout (cmd 0xa0)
[   65.636159] ata6.00: TEST_UNIT_READY failed (err_mask=0x5)
[   65.636166] ata6.00: limiting speed to UDMA/33:PIO3
[   65.636209] ata6: soft resetting link
[   65.776210] 2:3:3: cannot set freq 16000 to ep 0x86
[   65.904617] ata6.00: configured for UDMA/33
[   65.920602] ata6.01: configured for UDMA/33
[   66.776216] 2:3:3: cannot set freq 16000 to ep 0x86
[   67.776224] 2:3:3: cannot set freq 16000 to ep 0x86
[   68.776237] 2:3:3: cannot set freq 16000 to ep 0x86
[   69.776118] 2:3:3: cannot set freq 16000 to ep 0x86
[   70.920109] ata6.00: qc timeout (cmd 0xa0)
[   70.920117] ata6.00: TEST_UNIT_READY failed (err_mask=0x5)
[   70.920121] ata6.00: disabled
[   70.920138] ata6.01: TEST_UNIT_READY failed (err_mask=0x40)
[   70.920175] ata6: soft resetting link
[   71.100569] ata6.01: configured for UDMA/33
[   76.100102] ata6.01: qc timeout (cmd 0xa0)
[   76.100136] ata6.01: TEST_UNIT_READY failed (err_mask=0x5)
[   76.100143] ata6.01: limiting speed to UDMA/33:PIO3
[   76.100184] ata6: soft resetting link
[   76.280579] ata6.01: configured for UDMA/33
[   81.280093] ata6.01: qc timeout (cmd 0xa0)
[   81.280101] ata6.01: TEST_UNIT_READY failed (err_mask=0x5)
[   81.280105] ata6.01: disabled
[   81.280162] ata6: soft resetting link
[   81.436225] ata6: EH complete
[   81.915004] audit_printk_skb: 18 callbacks suppressed
[   81.915009] type=1400 audit(1303051657.584:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1671 comm="apparmor_parser"
[   81.916216] type=1400 audit(1303051657.588:19): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1671 comm="apparmor_parser"