[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005fee0000 (usable) [ 0.000000] BIOS-e820: 000000005fee0000 - 000000005fef5000 (ACPI data) [ 0.000000] BIOS-e820: 000000005fef5000 - 000000005ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000005ff00000 - 0000000060000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI present. [ 0.000000] DMI: IBM 2668R1G/2668R1G, BIOS 1YET62WW (1.27 ) 05/18/2006 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x5fee0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FE0000000 write-back [ 0.000000] 2 base 05FF00000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 3677e000 - 373b7000 [ 0.000000] ACPI: RSDP 000f6c00 00024 (v02 IBM ) [ 0.000000] ACPI: XSDT 5fee6ff2 0005C (v01 IBM TP-1Y 00001270 LTP 00000000) [ 0.000000] ACPI: FACP 5fee7100 000F4 (v03 IBM TP-1Y 00001270 IBM 00000001) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20110112/tbfadt-526) [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 0x000000000000102C/0x0 (20110112/tbfadt-557) [ 0.000000] ACPI: DSDT 5fee72e7 0DB08 (v01 IBM TP-1Y 00001270 MSFT 0100000E) [ 0.000000] ACPI: FACS 5fef6000 00040 [ 0.000000] ACPI: SSDT 5fee72b4 00033 (v01 IBM TP-1Y 00001270 MSFT 0100000E) [ 0.000000] ACPI: ECDT 5fef4def 00052 (v01 IBM TP-1Y 00001270 IBM 00000001) [ 0.000000] ACPI: TCPA 5fef4e41 00032 (v01 IBM TP-1Y 00001270 PTL 00000001) [ 0.000000] ACPI: APIC 5fef4e73 0005A (v01 IBM TP-1Y 00001270 IBM 00000001) [ 0.000000] ACPI: MCFG 5fef4ecd 0003E (v01 IBM TP-1Y 00001270 IBM 00000001) [ 0.000000] ACPI: BOOT 5fef4fd8 00028 (v01 IBM TP-1Y 00001270 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 646MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0005fee0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0005fee0 [ 0.000000] On node 0 totalpages: 392815 [ 0.000000] free_area_init_node: node 0, pgdat c1784100, node_mem_map f5b7e200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1294 pages used for memmap [ 0.000000] HighMem zone: 164308 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:80000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f5400000 s28800 r0 d24448 u4194304 [ 0.000000] pcpu-alloc: s28800 r0 d24448 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389745 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=78fe6e99-b7d9-41a9-8add-90b60c86aaf4 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 7858240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0005fee0) [ 0.000000] Memory: 1528528k/1571712k available (5188k kernel code, 42732k reserved, 2540k data, 700k init, 662408k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB) [ 0.000000] .data : 0xc15112a1 - 0xc178c480 (2540 kB) [ 0.000000] .text : 0xc1000000 - 0xc15112a1 (5188 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=f4806000 soft=f4808000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 798.030 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 1596.06 BogoMIPS (lpj=3192120) [ 0.004018] pid_max: default: 32768 minimum: 301 [ 0.004074] Security Framework initialized [ 0.004121] AppArmor: AppArmor initialized [ 0.004126] Yama: becoming mindful. [ 0.004268] Mount-cache hash table entries: 512 [ 0.004578] Initializing cgroup subsys ns [ 0.004587] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.004595] Initializing cgroup subsys cpuacct [ 0.004608] Initializing cgroup subsys memory [ 0.004634] Initializing cgroup subsys devices [ 0.004640] Initializing cgroup subsys freezer [ 0.004646] Initializing cgroup subsys net_cls [ 0.004652] Initializing cgroup subsys blkio [ 0.004741] mce: CPU supports 5 MCE banks [ 0.004761] CPU0: Thermal monitoring enabled (TM2) [ 0.006075] SMP alternatives: switching to UP code [ 0.023684] Freeing SMP alternatives: 20k freed [ 0.023700] ACPI: Core revision 20110112 [ 0.044023] ftrace: allocating 23640 entries in 47 pages [ 0.048100] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.048501] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.088468] CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 [ 0.092004] Performance Events: p6 PMU driver. [ 0.092004] ... version: 0 [ 0.092004] ... bit width: 32 [ 0.092004] ... generic registers: 2 [ 0.092004] ... value mask: 00000000ffffffff [ 0.092004] ... max period: 000000007fffffff [ 0.092004] ... fixed-purpose events: 0 [ 0.092004] ... event mask: 0000000000000003 [ 0.092004] Brought up 1 CPUs [ 0.092004] Total of 1 processors activated (1596.06 BogoMIPS). [ 0.092004] devtmpfs: initialized [ 0.092807] print_constraints: dummy: [ 0.092848] Time: 18:55:39 Date: 04/11/11 [ 0.092937] NET: Registered protocol family 16 [ 0.093201] EISA bus registered [ 0.093219] ACPI: bus type pci registered [ 0.093385] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.093395] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.093400] PCI: Using MMCONFIG for extended config space [ 0.093405] PCI: Using configuration type 1 for base access [ 0.096117] bio: create slab at 0 [ 0.101184] ACPI: EC: EC description table is found, configuring boot EC [ 0.128353] ACPI: Interpreter enabled [ 0.128364] ACPI: (supports S0 S3 S4 S5) [ 0.128418] ACPI: Using IOAPIC for interrupt routing [ 0.136409] ACPI: Power Resource [PUBS] (on) [ 0.144821] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.145979] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.145979] HEST: Table not found. [ 0.145979] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.145979] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.148172] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.148181] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.148189] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.148198] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.148206] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.148215] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored) [ 0.148238] pci 0000:00:00.0: [8086:2590] type 0 class 0x000600 [ 0.148310] pci 0000:00:01.0: [8086:2591] type 1 class 0x000604 [ 0.148365] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.148373] pci 0000:00:01.0: PME# disabled [ 0.148449] pci 0000:00:1c.0: [8086:2660] type 1 class 0x000604 [ 0.148551] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.148560] pci 0000:00:1c.0: PME# disabled [ 0.148603] pci 0000:00:1c.2: [8086:2664] type 1 class 0x000604 [ 0.148704] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.148713] pci 0000:00:1c.2: PME# disabled [ 0.148759] pci 0000:00:1d.0: [8086:2658] type 0 class 0x000c03 [ 0.148826] pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f] [ 0.148881] pci 0000:00:1d.1: [8086:2659] type 0 class 0x000c03 [ 0.148949] pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f] [ 0.149001] pci 0000:00:1d.2: [8086:265a] type 0 class 0x000c03 [ 0.149068] pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f] [ 0.149119] pci 0000:00:1d.3: [8086:265b] type 0 class 0x000c03 [ 0.149186] pci 0000:00:1d.3: reg 20: [io 0x1860-0x187f] [ 0.149251] pci 0000:00:1d.7: [8086:265c] type 0 class 0x000c03 [ 0.149284] pci 0000:00:1d.7: reg 10: [mem 0xb0000000-0xb00003ff] [ 0.149388] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.149398] pci 0000:00:1d.7: PME# disabled [ 0.149431] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.149533] pci 0000:00:1e.2: [8086:266e] type 0 class 0x000401 [ 0.149561] pci 0000:00:1e.2: reg 10: [io 0x1c00-0x1cff] [ 0.149578] pci 0000:00:1e.2: reg 14: [io 0x1880-0x18bf] [ 0.149596] pci 0000:00:1e.2: reg 18: [mem 0xb0000800-0xb00009ff] [ 0.149614] pci 0000:00:1e.2: reg 1c: [mem 0xb0000400-0xb00004ff] [ 0.149678] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold [ 0.149687] pci 0000:00:1e.2: PME# disabled [ 0.149717] pci 0000:00:1e.3: [8086:266d] type 0 class 0x000703 [ 0.149744] pci 0000:00:1e.3: reg 10: [io 0x2400-0x24ff] [ 0.149762] pci 0000:00:1e.3: reg 14: [io 0x2000-0x207f] [ 0.149848] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold [ 0.149857] pci 0000:00:1e.3: PME# disabled [ 0.149890] pci 0000:00:1f.0: [8086:2641] type 0 class 0x000601 [ 0.150017] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.150032] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.150044] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.150054] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 1600-167f [ 0.150063] pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 15e0-15ef [ 0.150099] pci 0000:00:1f.2: [8086:2653] type 0 class 0x000101 [ 0.150126] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] [ 0.150144] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] [ 0.150161] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] [ 0.150179] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] [ 0.150196] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf] [ 0.150251] pci 0000:00:1f.2: PME# supported from D3hot [ 0.150260] pci 0000:00:1f.2: PME# disabled [ 0.150287] pci 0000:00:1f.3: [8086:266a] type 0 class 0x000c05 [ 0.150371] pci 0000:00:1f.3: reg 20: [io 0x18e0-0x18ff] [ 0.150486] pci 0000:01:00.0: [1002:5460] type 0 class 0x000300 [ 0.150505] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xc7ffffff pref] [ 0.150519] pci 0000:01:00.0: reg 14: [io 0x3000-0x30ff] [ 0.150534] pci 0000:01:00.0: reg 18: [mem 0xb0100000-0xb010ffff] [ 0.150570] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.150599] pci 0000:01:00.0: supports D1 D2 [ 0.150616] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.150633] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.150641] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.150650] pci 0000:00:01.0: bridge window [mem 0xb0100000-0xb01fffff] [ 0.150659] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff pref] [ 0.150766] pci 0000:02:00.0: [14e4:167d] type 0 class 0x000200 [ 0.150806] pci 0000:02:00.0: reg 10: [mem 0xb0200000-0xb020ffff 64bit] [ 0.150950] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.150960] pci 0000:02:00.0: PME# disabled [ 0.150988] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.151008] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.151018] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.151028] pci 0000:00:1c.0: bridge window [mem 0xb0200000-0xb02fffff] [ 0.151042] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.151118] pci 0000:00:1c.2: PCI bridge to [bus 03-0a] [ 0.151127] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.151137] pci 0000:00:1c.2: bridge window [mem 0xb2000000-0xb3ffffff] [ 0.151151] pci 0000:00:1c.2: bridge window [mem 0xc8000000-0xc80fffff 64bit pref] [ 0.151214] pci 0000:0b:00.0: [1180:0476] type 2 class 0x000607 [ 0.151250] pci 0000:0b:00.0: reg 10: [mem 0xb4000000-0xb4000fff] [ 0.151287] pci 0000:0b:00.0: supports D1 D2 [ 0.151293] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.151304] pci 0000:0b:00.0: PME# disabled [ 0.151356] pci 0000:0b:02.0: [8086:4220] type 0 class 0x000280 [ 0.151391] pci 0000:0b:02.0: reg 10: [mem 0xb4001000-0xb4001fff] [ 0.151518] pci 0000:0b:02.0: PME# supported from D0 D3hot D3cold [ 0.151528] pci 0000:0b:02.0: PME# disabled [ 0.151607] pci 0000:00:1e.0: PCI bridge to [bus 0b-0e] (subtractive decode) [ 0.151617] pci 0000:00:1e.0: bridge window [io 0x5000-0x8fff] [ 0.151627] pci 0000:00:1e.0: bridge window [mem 0xb4000000-0xbfffffff] [ 0.151641] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] [ 0.151649] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.151657] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.151751] pci_bus 0000:00: on NUMA node 0 [ 0.151759] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.152001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.152101] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.152210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.152330] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.152565] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.161867] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162083] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162294] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162503] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162712] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.162921] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.163130] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11) [ 0.163339] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.163607] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.163618] vgaarb: loaded [ 0.164176] SCSI subsystem initialized [ 0.164271] libata version 3.00 loaded. [ 0.164392] usbcore: registered new interface driver usbfs [ 0.164424] usbcore: registered new interface driver hub [ 0.164484] usbcore: registered new device driver usb [ 0.164751] wmi: Mapper loaded [ 0.164755] PCI: Using ACPI for IRQ routing [ 0.164762] PCI: pci_cache_line_size set to 64 bytes [ 0.164888] Expanded resource reserved due to conflict with Adapter ROM [ 0.164897] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.164904] reserve RAM buffer: 000000005fee0000 - 000000005fffffff [ 0.165156] NetLabel: Initializing [ 0.165162] NetLabel: domain hash size = 128 [ 0.165166] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.165193] NetLabel: unlabeled traffic allowed by default [ 0.165551] hpet clockevent registered [ 0.165560] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.165571] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.165584] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.168089] Switching to clocksource hpet [ 0.171935] Switched to NOHz mode on CPU #0 [ 0.186537] AppArmor: AppArmor Filesystem Enabled [ 0.186600] pnp: PnP ACPI init [ 0.186655] ACPI: bus type pnp registered [ 0.187907] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.187915] pnp 00:00: [mem 0x000c0000-0x000c3fff] [ 0.187922] pnp 00:00: [mem 0x000c4000-0x000c7fff] [ 0.187928] pnp 00:00: [mem 0x000c8000-0x000cbfff] [ 0.187935] pnp 00:00: [mem 0x000cc000-0x000cffff] [ 0.187941] pnp 00:00: [mem 0x000d0000-0x000d3fff] [ 0.187948] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled] [ 0.187955] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled] [ 0.187962] pnp 00:00: [mem 0x000dc000-0x000dffff] [ 0.187968] pnp 00:00: [mem 0x000e0000-0x000e3fff] [ 0.187975] pnp 00:00: [mem 0x000e4000-0x000e7fff] [ 0.187981] pnp 00:00: [mem 0x000e8000-0x000ebfff] [ 0.187987] pnp 00:00: [mem 0x000ec000-0x000effff] [ 0.187994] pnp 00:00: [mem 0x000f0000-0x000fffff] [ 0.188000] pnp 00:00: [mem 0x00100000-0x5fffffff] [ 0.188028] pnp 00:00: [mem 0xfec00000-0xffffffff] [ 0.188197] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.188207] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.188215] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.188223] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved [ 0.188232] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.188240] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 0.188249] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved [ 0.188257] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.188265] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.188274] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.188282] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.188290] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.188299] system 00:00: [mem 0x00100000-0x5fffffff] could not be reserved [ 0.188308] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.188318] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.188383] pnp 00:01: [bus 00-ff] [ 0.188390] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.188397] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.188403] pnp 00:01: [io 0x0d00-0xffff window] [ 0.188411] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.188418] pnp 00:01: [mem 0x000c0000-0x000c3fff window] [ 0.188425] pnp 00:01: [mem 0x000c4000-0x000c7fff window] [ 0.188432] pnp 00:01: [mem 0x000c8000-0x000cbfff window] [ 0.188439] pnp 00:01: [mem 0x000cc000-0x000cffff window] [ 0.188446] pnp 00:01: [mem 0x000d0000-0x000d3fff window] [ 0.188453] pnp 00:01: [mem 0x000d4000-0x000d7fff window] [ 0.188460] pnp 00:01: [mem 0x000d8000-0x000dbfff window] [ 0.188467] pnp 00:01: [mem 0x000dc000-0x000dffff window] [ 0.188474] pnp 00:01: [mem 0x000e0000-0x000e3fff window] [ 0.188481] pnp 00:01: [mem 0x000e4000-0x000e7fff window] [ 0.188488] pnp 00:01: [mem 0x000e8000-0x000ebfff window] [ 0.188495] pnp 00:01: [mem 0x000ec000-0x000effff window] [ 0.188502] pnp 00:01: [mem 0x60000000-0xfebfffff window] [ 0.188637] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.188686] pnp 00:02: [io 0x0010-0x001f] [ 0.188692] pnp 00:02: [io 0x0090-0x009f] [ 0.188698] pnp 00:02: [io 0x0024-0x0025] [ 0.188704] pnp 00:02: [io 0x0028-0x0029] [ 0.188710] pnp 00:02: [io 0x002c-0x002d] [ 0.188716] pnp 00:02: [io 0x0030-0x0031] [ 0.188722] pnp 00:02: [io 0x0034-0x0035] [ 0.188728] pnp 00:02: [io 0x0038-0x0039] [ 0.188734] pnp 00:02: [io 0x003c-0x003d] [ 0.188739] pnp 00:02: [io 0x00a4-0x00a5] [ 0.188745] pnp 00:02: [io 0x00a8-0x00a9] [ 0.188751] pnp 00:02: [io 0x00ac-0x00ad] [ 0.188757] pnp 00:02: [io 0x00b0-0x00b5] [ 0.188763] pnp 00:02: [io 0x00b8-0x00b9] [ 0.188769] pnp 00:02: [io 0x00bc-0x00bd] [ 0.188775] pnp 00:02: [io 0x0050-0x0053] [ 0.188781] pnp 00:02: [io 0x0072-0x0077] [ 0.188787] pnp 00:02: [io 0x002e-0x002f] [ 0.188793] pnp 00:02: [io 0x1000-0x107f] [ 0.188799] pnp 00:02: [io 0x1180-0x11bf] [ 0.188805] pnp 00:02: [io 0x15e0-0x15ef] [ 0.188811] pnp 00:02: [io 0x1600-0x1641] [ 0.188824] pnp 00:02: [io 0x1644-0x167f] [ 0.188831] pnp 00:02: [mem 0xe0000000-0xefffffff] [ 0.188837] pnp 00:02: [mem 0xf0008000-0xf000bfff] [ 0.188844] pnp 00:02: [mem 0xfed14000-0xfed17fff] [ 0.188850] pnp 00:02: [mem 0xfed18000-0xfed18fff] [ 0.188857] pnp 00:02: [mem 0xfed19000-0xfed19fff] [ 0.189069] system 00:02: [io 0x1000-0x107f] has been reserved [ 0.189078] system 00:02: [io 0x1180-0x11bf] has been reserved [ 0.189086] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 0.189094] system 00:02: [io 0x1600-0x1641] has been reserved [ 0.189101] system 00:02: [io 0x1644-0x167f] has been reserved [ 0.189110] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved [ 0.189119] system 00:02: [mem 0xf0008000-0xf000bfff] has been reserved [ 0.189127] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.189136] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.189144] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.189153] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.189191] pnp 00:03: [io 0x0000-0x000f] [ 0.189198] pnp 00:03: [io 0x0080-0x008f] [ 0.189204] pnp 00:03: [io 0x00c0-0x00df] [ 0.189210] pnp 00:03: [dma 4] [ 0.189293] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.189318] pnp 00:04: [io 0x0061] [ 0.189395] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.189420] pnp 00:05: [io 0x00f0] [ 0.189441] pnp 00:05: [irq 13] [ 0.189521] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.189547] pnp 00:06: [io 0x0070-0x0071] [ 0.189558] pnp 00:06: [irq 8] [ 0.189642] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.189669] pnp 00:07: [io 0x0060] [ 0.189675] pnp 00:07: [io 0x0064] [ 0.189686] pnp 00:07: [irq 1] [ 0.189768] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.189799] pnp 00:08: [irq 12] [ 0.189883] pnp 00:08: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active) [ 0.189960] pnp 00:09: [io 0x03f0-0x03f5] [ 0.189967] pnp 00:09: [io 0x03f7] [ 0.189978] pnp 00:09: [irq 6] [ 0.189984] pnp 00:09: [dma 2] [ 0.190095] pnp 00:09: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.190340] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (disabled) [ 0.190588] pnp 00:0b: [io 0x03bc-0x03be] [ 0.190600] pnp 00:0b: [irq 7] [ 0.190788] pnp 00:0b: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.191118] pnp 00:0c: Plug and Play ACPI device, IDs IBM0071 PNP0511 (disabled) [ 0.191344] pnp 00:0d: Plug and Play ACPI device, IDs NSC1100 (disabled) [ 0.192444] pnp: PnP ACPI: found 14 devices [ 0.192450] ACPI: ACPI bus type pnp unregistered [ 0.192457] PnPBIOS: Disabled by ACPI PNP [ 0.232113] pci 0000:00:1c.0: BAR 15: assigned [mem 0x60000000-0x601fffff 64bit pref] [ 0.232126] pci 0000:00:1c.0: BAR 13: assigned [io 0x9000-0x9fff] [ 0.232137] pci 0000:01:00.0: BAR 6: assigned [mem 0xb0120000-0xb013ffff pref] [ 0.232145] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.232153] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.232162] pci 0000:00:01.0: bridge window [mem 0xb0100000-0xb01fffff] [ 0.232171] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff pref] [ 0.232182] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.232190] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff] [ 0.232201] pci 0000:00:1c.0: bridge window [mem 0xb0200000-0xb02fffff] [ 0.232212] pci 0000:00:1c.0: bridge window [mem 0x60000000-0x601fffff 64bit pref] [ 0.232225] pci 0000:00:1c.2: PCI bridge to [bus 03-0a] [ 0.232233] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.232244] pci 0000:00:1c.2: bridge window [mem 0xb2000000-0xb3ffffff] [ 0.232255] pci 0000:00:1c.2: bridge window [mem 0xc8000000-0xc80fffff 64bit pref] [ 0.232272] pci 0000:0b:00.0: BAR 15: assigned [mem 0xd0000000-0xd3ffffff pref] [ 0.232281] pci 0000:0b:00.0: BAR 16: assigned [mem 0xb8000000-0xbbffffff] [ 0.232289] pci 0000:0b:00.0: BAR 13: assigned [io 0x5000-0x50ff] [ 0.232296] pci 0000:0b:00.0: BAR 14: assigned [io 0x5400-0x54ff] [ 0.232303] pci 0000:0b:00.0: CardBus bridge to [bus 0c-0d] [ 0.232310] pci 0000:0b:00.0: bridge window [io 0x5000-0x50ff] [ 0.232320] pci 0000:0b:00.0: bridge window [io 0x5400-0x54ff] [ 0.232332] pci 0000:0b:00.0: bridge window [mem 0xd0000000-0xd3ffffff pref] [ 0.232343] pci 0000:0b:00.0: bridge window [mem 0xb8000000-0xbbffffff] [ 0.232354] pci 0000:00:1e.0: PCI bridge to [bus 0b-0e] [ 0.232361] pci 0000:00:1e.0: bridge window [io 0x5000-0x8fff] [ 0.232373] pci 0000:00:1e.0: bridge window [mem 0xb4000000-0xbfffffff] [ 0.232384] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xd7ffffff 64bit pref] [ 0.232418] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.232428] pci 0000:00:01.0: setting latency timer to 64 [ 0.232448] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.232457] pci 0000:00:1c.0: setting latency timer to 64 [ 0.232477] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.232487] pci 0000:00:1c.2: setting latency timer to 64 [ 0.232500] pci 0000:00:1e.0: setting latency timer to 64 [ 0.232516] pci 0000:0b:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.232530] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.232537] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.232544] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.232551] pci_bus 0000:01: resource 1 [mem 0xb0100000-0xb01fffff] [ 0.232559] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff pref] [ 0.232567] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 0.232574] pci_bus 0000:02: resource 1 [mem 0xb0200000-0xb02fffff] [ 0.232582] pci_bus 0000:02: resource 2 [mem 0x60000000-0x601fffff 64bit pref] [ 0.232589] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff] [ 0.232596] pci_bus 0000:03: resource 1 [mem 0xb2000000-0xb3ffffff] [ 0.232604] pci_bus 0000:03: resource 2 [mem 0xc8000000-0xc80fffff 64bit pref] [ 0.232612] pci_bus 0000:0b: resource 0 [io 0x5000-0x8fff] [ 0.232619] pci_bus 0000:0b: resource 1 [mem 0xb4000000-0xbfffffff] [ 0.232627] pci_bus 0000:0b: resource 2 [mem 0xd0000000-0xd7ffffff 64bit pref] [ 0.232634] pci_bus 0000:0b: resource 4 [io 0x0000-0xffff] [ 0.232642] pci_bus 0000:0b: resource 5 [mem 0x00000000-0xffffffff] [ 0.232649] pci_bus 0000:0c: resource 0 [io 0x5000-0x50ff] [ 0.232656] pci_bus 0000:0c: resource 1 [io 0x5400-0x54ff] [ 0.232664] pci_bus 0000:0c: resource 2 [mem 0xd0000000-0xd3ffffff pref] [ 0.232671] pci_bus 0000:0c: resource 3 [mem 0xb8000000-0xbbffffff] [ 0.232751] NET: Registered protocol family 2 [ 0.232904] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.233438] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.234951] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.235713] TCP: Hash tables configured (established 131072 bind 65536) [ 0.235719] TCP reno registered [ 0.235727] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.235752] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.235956] NET: Registered protocol family 1 [ 0.236167] pci 0000:01:00.0: Boot video device [ 0.236191] PCI: CLS 32 bytes, default 64 [ 0.236329] Simple Boot Flag at 0x35 set to 0x1 [ 0.236556] cpufreq-nforce2: No nForce2 chipset. [ 0.236897] audit: initializing netlink socket (disabled) [ 0.236926] type=2000 audit(1302548139.232:1): initialized [ 0.262599] Trying to unpack rootfs image as initramfs... [ 0.293749] highmem bounce pool size: 64 pages [ 0.293768] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.305798] VFS: Disk quotas dquot_6.5.2 [ 0.305958] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.307820] fuse init (API version 7.16) [ 0.308115] msgmni has been set to 1691 [ 0.316330] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.316388] io scheduler noop registered [ 0.316393] io scheduler deadline registered [ 0.316436] io scheduler cfq registered (default) [ 0.316701] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.316763] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.316870] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.316940] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.317063] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.317132] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.317322] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.317388] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.317764] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.318052] ACPI: AC Adapter [AC] (off-line) [ 0.318235] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.319413] ACPI: Lid Switch [LID] [ 0.319768] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.319782] ACPI: Sleep Button [SLPB] [ 0.319939] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.319949] ACPI: Power Button [PWRF] [ 0.320345] ACPI: acpi_idle registered with cpuidle [ 0.324238] Marking TSC unstable due to TSC halts in idle [ 0.338763] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.338771] ACPI: Thermal Zone [THM0] (52 C) [ 0.338825] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.338983] ERST: Table is not found! [ 0.339135] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.342118] serial 00:0a: [io 0x03f8-0x03ff] [ 0.342213] serial 00:0a: [irq 4] [ 0.342839] serial 00:0a: activated [ 0.343032] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 0.343335] serial 0000:00:1e.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23 [ 0.343348] serial 0000:00:1e.3: PCI INT B disabled [ 0.343629] Linux agpgart interface v0.103 [ 0.348611] isapnp: Scanning for PnP cards... [ 0.405743] brd: module loaded [ 0.407431] loop: module loaded [ 0.407659] i2c-core: driver [adp5520] using legacy suspend method [ 0.407665] i2c-core: driver [adp5520] using legacy resume method [ 0.407896] ata_piix 0000:00:1f.2: version 2.13 [ 0.407919] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 0.560574] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.564323] scsi0 : ata_piix [ 0.564575] scsi1 : ata_piix [ 0.565851] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18c0 irq 14 [ 0.565859] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18c8 irq 15 [ 0.566937] Fixed MDIO Bus: probed [ 0.567051] PPP generic driver version 2.4.2 [ 0.567185] tun: Universal TUN/TAP device driver, 1.6 [ 0.567190] tun: (C) 1999-2004 Max Krasnyansky [ 0.567417] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.567450] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 0.567461] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 0.567496] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.567524] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.567533] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.567636] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.567697] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.571608] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.576592] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0000000 [ 0.596619] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.596963] hub 1-0:1.0: USB hub found [ 0.596975] hub 1-0:1.0: 8 ports detected [ 0.597177] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.597215] uhci_hcd: USB Universal Host Controller Interface driver [ 0.597294] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 0.597303] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 0.597317] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.597332] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.597340] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.597441] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.597505] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 [ 0.597811] hub 2-0:1.0: USB hub found [ 0.597821] hub 2-0:1.0: 2 ports detected [ 0.597975] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0 [ 0.597984] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0 [ 0.598011] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.598024] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.598032] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.598126] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.598183] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820 [ 0.598490] hub 3-0:1.0: USB hub found [ 0.598500] hub 3-0:1.0: 2 ports detected [ 0.598669] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.598682] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.598690] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.598788] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.598844] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 [ 0.599149] hub 4-0:1.0: USB hub found [ 0.599159] hub 4-0:1.0: 2 ports detected [ 0.599317] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.599330] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.599338] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.599440] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.599481] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860 [ 0.599787] hub 5-0:1.0: USB hub found [ 0.599797] hub 5-0:1.0: 2 ports detected [ 0.604260] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.701372] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.701382] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.701583] mousedev: PS/2 mouse device common for all mice [ 0.701935] rtc_cmos 00:06: RTC can wake from S4 [ 0.702057] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.702098] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.702319] device-mapper: uevent: version 1.0.3 [ 0.702535] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 0.706078] device-mapper: multipath: version 1.2.0 loaded [ 0.706086] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.706284] EISA: Probing bus 0 at eisa.0 [ 0.706296] Cannot allocate resource for EISA slot 1 [ 0.706302] Cannot allocate resource for EISA slot 2 [ 0.706308] Cannot allocate resource for EISA slot 3 [ 0.706314] Cannot allocate resource for EISA slot 4 [ 0.706320] Cannot allocate resource for EISA slot 5 [ 0.706325] Cannot allocate resource for EISA slot 6 [ 0.706331] Cannot allocate resource for EISA slot 7 [ 0.706336] Cannot allocate resource for EISA slot 8 [ 0.706341] EISA: Detected 0 cards. [ 0.708893] cpuidle: using governor ladder [ 0.709067] cpuidle: using governor menu [ 0.709729] TCP cubic registered [ 0.710098] NET: Registered protocol family 10 [ 0.711434] NET: Registered protocol family 17 [ 0.711474] Registering the dns_resolver key type [ 0.716395] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.741092] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4242N, 0J05, max UDMA/33 [ 0.741226] ata1.00: ATA-6: FUJITSU MHV2040AH, 00840096, max UDMA/100 [ 0.741234] ata1.00: 78140160 sectors, multi 16: LBA [ 0.741242] ata1.00: applying bridge limits [ 0.756884] ata2.00: configured for UDMA/33 [ 0.800521] ata1.00: configured for UDMA/100 [ 0.845580] P-state transition latency capped at 20 uS [ 0.845997] Using IPI No-Shortcut mode [ 0.846115] PM: Hibernation image not present or could not be loaded. [ 0.846132] registered taskstats version 1 [ 0.846412] Magic number: 7:613:948 [ 0.846464] tty tty5: hash matches [ 0.846535] rtc_cmos 00:06: setting system clock to 2011-04-11 18:55:40 UTC (1302548140) [ 0.846539] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.846541] EDD information not available. [ 0.877442] ACPI: Battery Slot [BAT0] (battery present) [ 0.943903] isapnp: No Plug & Play device found [ 0.944097] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2040A 0084 PQ: 0 ANSI: 5 [ 0.944351] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.944570] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 0.944632] sd 0:0:0:0: [sda] Write Protect is off [ 0.944636] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.944663] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.948794] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4242N 0J05 PQ: 0 ANSI: 5 [ 0.954007] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 0.954012] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.954170] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 0.954270] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.000862] sda: sda1 sda2 < sda5 > [ 1.001277] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.183405] Freeing initrd memory: 12516k freed [ 1.193693] Freeing unused kernel memory: 700k freed [ 1.194267] Write protecting the kernel text: 5192k [ 1.194314] Write protecting the kernel read-only data: 2148k [ 1.220126] <30>udev[65]: starting version 167 [ 1.456977] Floppy drive(s): fd0 is 1.44M [ 1.475327] FDC 0 is a National Semiconductor PC87306 [ 1.482399] tg3.c:v3.116 (December 3, 2010) [ 1.482416] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.482430] tg3 0000:02:00.0: setting latency timer to 64 [ 1.528115] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95751M) rev 4101] (PCI Express) MAC address 00:16:41:a7:73:c0 [ 1.528121] tg3 0000:02:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 1.528125] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.528129] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 1.664168] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.332154] <30>udev[269]: starting version 167 [ 17.339695] Adding 1570812k swap on /dev/sda5. Priority:-1 extents:1 across:1570812k [ 17.387362] lp: driver loaded but no devices found [ 17.537593] intel_rng: FWH not detected [ 17.574433] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr [ 17.846674] type=1400 audit(1302548157.493:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=507 comm="apparmor_parser" [ 17.847707] type=1400 audit(1302548157.493:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=507 comm="apparmor_parser" [ 17.848353] type=1400 audit(1302548157.497:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=507 comm="apparmor_parser" [ 18.284054] Non-volatile memory driver v1.3 [ 18.288850] lib80211: common routines for IEEE802.11 drivers [ 18.288855] lib80211_crypt: registered algorithm 'NULL' [ 18.307960] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.515851] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input4 [ 18.540446] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 18.550602] type=1400 audit(1302548158.197:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=631 comm="apparmor_parser" [ 18.558873] type=1400 audit(1302548158.205:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=632 comm="apparmor_parser" [ 18.561029] type=1400 audit(1302548158.209:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=632 comm="apparmor_parser" [ 18.561603] type=1400 audit(1302548158.209:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=632 comm="apparmor_parser" [ 18.594471] type=1400 audit(1302548158.241:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=633 comm="apparmor_parser" [ 18.632641] type=1400 audit(1302548158.281:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=633 comm="apparmor_parser" [ 18.643920] type=1400 audit(1302548158.289:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=633 comm="apparmor_parser" [ 18.735335] parport_pc 00:0b: reported by Plug and Play ACPI [ 18.735390] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 18.846511] lp0: using parport0 (interrupt-driven). [ 18.849386] yenta_cardbus 0000:0b:00.0: CardBus bridge found [1014:056c] [ 18.976591] yenta_cardbus 0000:0b:00.0: ISA IRQ mask 0x0c38, PCI irq 16 [ 18.976597] yenta_cardbus 0000:0b:00.0: Socket status: 30000006 [ 18.976876] yenta_cardbus 0000:0b:00.0: pcmcia: parent PCI bridge window: [io 0x5000-0x8fff] [ 18.976880] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x8fff: excluding 0x5000-0x50ff 0x5400-0x54ff [ 18.994311] irda_init() [ 18.994330] NET: Registered protocol family 23 [ 19.124276] ppdev: user-space parallel port driver [ 19.168777] nsc-ircc 00:0c: [io 0x02f8-0x02ff] [ 19.168852] nsc-ircc 00:0c: [irq 3] [ 19.168856] nsc-ircc 00:0c: [dma 1] [ 19.169301] nsc-ircc 00:0c: activated [ 19.169306] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 19.176508] nsc-ircc, chip->init [ 19.176523] nsc-ircc, Found chip at base=0x02e [ 19.176560] nsc-ircc, driver loaded (Dag Brattli) [ 19.206114] IrDA: Registered device irda0 [ 19.206119] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 19.294745] cfg80211: Calling CRDA to update world regulatory domain [ 19.330374] cfg80211: World regulatory domain updated: [ 19.330378] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 19.330382] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.330386] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.330389] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 19.330392] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.330396] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 19.337828] [ 19.337836] yenta_cardbus 0000:0b:00.0: pcmcia: parent PCI bridge window: [mem 0xb4000000-0xbfffffff] [ 19.337842] pcmcia_socket pcmcia_socket0: cs: memory probe 0xb4000000-0xbfffffff: excluding 0xb4000000-0xb47fffff 0xb8000000-0xbbffffff [ 19.337862] yenta_cardbus 0000:0b:00.0: pcmcia: parent PCI bridge window: [mem 0xd0000000-0xd7ffffff 64bit pref] [ 19.337866] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0000000-0xd7ffffff: excluding 0xd0000000-0xd7ffffff [ 19.396269] libipw: 802.11 data/management/control stack, git-1.1.13 [ 19.396274] libipw: Copyright (C) 2004-2005 Intel Corporation [ 19.405827] [drm] Initialized drm 1.1.0 20060810 [ 19.513606] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 19.513611] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 19.513732] ipw2200 0000:0b:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 19.519136] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 19.595123] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377 [ 19.599689] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3ff 0x4d0-0x4d7 [ 19.600700] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 19.601325] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 19.602009] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff [ 19.602071] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 19.602132] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x601fffff [ 19.602197] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 19.653241] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 19.653246] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 19.653248] thinkpad_acpi: ThinkPad BIOS 1YET62WW (1.27 ), EC 1YHT29WW-1.06 [ 19.653251] thinkpad_acpi: IBM ThinkPad T43, model 2668R1G [ 19.653254] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware [ 19.653256] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features [ 19.691148] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 19.709139] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked [ 19.709951] Registered led device: tpacpi::thinklight [ 19.710055] Registered led device: tpacpi::power [ 19.710137] Registered led device: tpacpi::standby [ 19.782064] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0/0x0 [ 19.782071] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 19.784492] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 19.784496] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 19.784499] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 19.784503] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 19.784506] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 19.784509] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 19.784539] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 19.784543] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 19.784546] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 19.784549] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 19.784552] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 19.784556] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 19.784558] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 19.784562] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 19.784565] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 19.784568] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 19.784571] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 19.784575] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 19.784578] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 19.784581] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 19.784584] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 19.784587] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 19.784590] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 19.784594] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 19.784597] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 19.784600] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 19.784603] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 19.784606] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 19.799419] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 19.801569] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) [ 19.813432] thinkpad_acpi: fan_init: initial fan status is unknown, assuming it is in auto mode [ 19.814187] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5 [ 19.842731] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 19.929679] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 19.929710] Intel ICH 0000:00:1e.2: setting latency timer to 64 [ 19.944269] [drm] radeon defaulting to kernel modesetting. [ 19.944273] [drm] radeon kernel modesetting enabled. [ 19.944353] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 19.944359] radeon 0000:01:00.0: power state changed by ACPI to D0 [ 19.944367] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 19.944374] radeon 0000:01:00.0: setting latency timer to 64 [ 19.946722] [drm] initializing kernel modesetting (RV380 0x1002:0x5460). [ 19.946758] [drm] register mmio base: 0xB0100000 [ 19.946760] [drm] register mmio size: 65536 [ 19.946933] [drm] Generation 2 PCI interface, using max accessible memory [ 19.946941] radeon 0000:01:00.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (64M used) [ 19.946946] radeon 0000:01:00.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 19.946962] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 19.946965] [drm] Driver supports precise vblank timestamp query. [ 19.947008] radeon 0000:01:00.0: irq 43 for MSI/MSI-X [ 19.947014] radeon 0000:01:00.0: radeon: using MSI. [ 19.947040] [drm] radeon: irq initialized. [ 19.948876] [drm] Detected VRAM RAM=128M, BAR=128M [ 19.948881] [drm] RAM width 64bits DDR [ 19.948946] [TTM] Zone kernel: Available graphics memory: 439678 kiB. [ 19.948948] [TTM] Zone highmem: Available graphics memory: 770882 kiB. [ 19.948951] [TTM] Initializing pool allocator. [ 19.948974] [drm] radeon: 64M of VRAM memory ready [ 19.948976] [drm] radeon: 512M of GTT memory ready. [ 19.949001] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 19.949756] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 19.951266] [drm] PCIE GART of 512M enabled (table at 0xC0040000). [ 19.951285] radeon 0000:01:00.0: WB enabled [ 19.951920] [drm] Loading R300 Microcode [ 19.955880] [drm] radeon: ring at 0x00000000A0001000 [ 19.955905] [drm] ring test succeeded in 1 usecs [ 19.956251] [drm] radeon: ib pool ready. [ 19.956332] [drm] ib test succeeded in 0 usecs [ 19.960446] [drm] Panel ID String: 1024x768 [ 19.960450] [drm] Panel Size 1024x768 [ 19.960742] [drm] Radeon Display Connectors [ 19.960745] [drm] Connector 0: [ 19.960747] [drm] VGA [ 19.960750] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 19.960752] [drm] Encoders: [ 19.960754] [drm] CRT1: INTERNAL_DAC1 [ 19.960756] [drm] Connector 1: [ 19.960758] [drm] DVI-D [ 19.960759] [drm] HPD1 [ 19.960762] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 19.960764] [drm] Encoders: [ 19.960766] [drm] DFP1: INTERNAL_TMDS1 [ 19.960768] [drm] Connector 2: [ 19.960769] [drm] LVDS [ 19.960771] [drm] Encoders: [ 19.960772] [drm] LCD1: INTERNAL_LVDS [ 19.960774] [drm] Connector 3: [ 19.960776] [drm] S-video [ 19.960777] [drm] Encoders: [ 19.960779] [drm] TV1: INTERNAL_DAC2 [ 19.968655] [drm] radeon: power management initialized [ 20.008563] [drm] fb mappable at 0xC00C0000 [ 20.008565] [drm] vram apper at 0xC0000000 [ 20.008567] [drm] size 3145728 [ 20.008569] [drm] fb depth is 24 [ 20.008571] [drm] pitch is 4096 [ 20.010274] Console: switching to colour frame buffer device 128x48 [ 20.010309] fb0: radeondrmfb frame buffer device [ 20.010311] drm: registered panic notifier [ 20.010477] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0 [ 20.703228] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=600 [ 20.852116] intel8x0_measure_ac97_clock: measured 55550 usecs (2676 samples) [ 20.852121] intel8x0: clocking to 48000 [ 22.663308] psmouse serio2: ID: 10 00 64 [ 23.768512] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr,commit=600 [ 26.217932] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 26.455424] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 [ 30.369979] eth1: no IPv6 routers present [ 40.487093] lib80211_crypt: registered algorithm 'CCMP' [ 42.175075] Intel AES-NI instructions are not detected. [ 42.265239] padlock_aes: VIA PadLock not detected. [ 42.558345] lib80211_crypt: registered algorithm 'TKIP' [ 67.086299] exe (1826): /proc/1826/oom_adj is deprecated, please use /proc/1826/oom_score_adj instead. [ 766.378036] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 766.378047] ata1.00: BMDMA stat 0x24 [ 766.378055] ata1.00: failed command: READ DMA [ 766.378073] ata1.00: cmd c8/00:00:40:61:59/00:00:00:00:00/e3 tag 0 dma 131072 in [ 766.378077] res 51/40:8c:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 766.378085] ata1.00: status: { DRDY ERR } [ 766.378091] ata1.00: error: { UNC } [ 766.588404] ata1.00: configured for UDMA/100 [ 766.588425] ata1: EH complete [ 770.933265] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 770.933276] ata1.00: BMDMA stat 0x24 [ 770.933284] ata1.00: failed command: READ DMA [ 770.933301] ata1.00: cmd c8/00:00:40:61:59/00:00:00:00:00/e3 tag 0 dma 131072 in [ 770.933305] res 51/40:8c:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 770.933313] ata1.00: status: { DRDY ERR } [ 770.933319] ata1.00: error: { UNC } [ 770.956518] ata1.00: configured for UDMA/100 [ 770.956539] ata1: EH complete [ 775.221185] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 775.221195] ata1.00: BMDMA stat 0x24 [ 775.221203] ata1.00: failed command: READ DMA [ 775.221220] ata1.00: cmd c8/00:00:40:61:59/00:00:00:00:00/e3 tag 0 dma 131072 in [ 775.221224] res 51/40:8c:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 775.221232] ata1.00: status: { DRDY ERR } [ 775.221238] ata1.00: error: { UNC } [ 775.244510] ata1.00: configured for UDMA/100 [ 775.244529] ata1: EH complete [ 779.509117] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 779.509127] ata1.00: BMDMA stat 0x24 [ 779.509136] ata1.00: failed command: READ DMA [ 779.509153] ata1.00: cmd c8/00:00:40:61:59/00:00:00:00:00/e3 tag 0 dma 131072 in [ 779.509157] res 51/40:8c:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 779.509165] ata1.00: status: { DRDY ERR } [ 779.509171] ata1.00: error: { UNC } [ 779.532648] ata1.00: configured for UDMA/100 [ 779.532667] ata1: EH complete [ 783.797058] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 783.797068] ata1.00: BMDMA stat 0x24 [ 783.797076] ata1.00: failed command: READ DMA [ 783.797094] ata1.00: cmd c8/00:00:40:61:59/00:00:00:00:00/e3 tag 0 dma 131072 in [ 783.797097] res 51/40:8c:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 783.797105] ata1.00: status: { DRDY ERR } [ 783.797111] ata1.00: error: { UNC } [ 783.820665] ata1.00: configured for UDMA/100 [ 783.820684] ata1: EH complete [ 788.084995] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 788.085005] ata1.00: BMDMA stat 0x24 [ 788.085014] ata1.00: failed command: READ DMA [ 788.085031] ata1.00: cmd c8/00:00:40:61:59/00:00:00:00:00/e3 tag 0 dma 131072 in [ 788.085034] res 51/40:8c:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 788.085043] ata1.00: status: { DRDY ERR } [ 788.085048] ata1.00: error: { UNC } [ 788.108385] ata1.00: configured for UDMA/100 [ 788.108409] sd 0:0:0:0: [sda] Unhandled sense code [ 788.108415] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 788.108425] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 788.108436] Descriptor sense data with sense descriptors (in hex): [ 788.108442] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 788.108466] 03 59 61 b4 [ 788.108476] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 788.108490] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 03 59 61 40 00 01 00 00 [ 788.108512] end_request: I/O error, dev sda, sector 56189364 [ 788.108546] ata1: EH complete [ 792.461883] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 792.461894] ata1.00: BMDMA stat 0x24 [ 792.461902] ata1.00: failed command: READ DMA [ 792.461920] ata1.00: cmd c8/00:00:40:63:59/00:00:00:00:00/e3 tag 0 dma 131072 in [ 792.461923] res 51/40:5d:e3:63:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 792.461931] ata1.00: status: { DRDY ERR } [ 792.461938] ata1.00: error: { UNC } [ 792.484470] ata1.00: configured for UDMA/100 [ 792.484491] ata1: EH complete [ 796.749837] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 796.749848] ata1.00: BMDMA stat 0x24 [ 796.749856] ata1.00: failed command: READ DMA [ 796.749873] ata1.00: cmd c8/00:00:40:63:59/00:00:00:00:00/e3 tag 0 dma 131072 in [ 796.749877] res 51/40:5d:e3:63:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 796.749885] ata1.00: status: { DRDY ERR } [ 796.749891] ata1.00: error: { UNC } [ 796.772383] ata1.00: configured for UDMA/100 [ 796.772404] ata1: EH complete [ 801.037789] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 801.037800] ata1.00: BMDMA stat 0x24 [ 801.037808] ata1.00: failed command: READ DMA [ 801.037825] ata1.00: cmd c8/00:00:40:63:59/00:00:00:00:00/e3 tag 0 dma 131072 in [ 801.037828] res 51/40:5d:e3:63:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 801.037837] ata1.00: status: { DRDY ERR } [ 801.037842] ata1.00: error: { UNC } [ 801.060366] ata1.00: configured for UDMA/100 [ 801.060388] ata1: EH complete [ 805.325743] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 805.325754] ata1.00: BMDMA stat 0x24 [ 805.325762] ata1.00: failed command: READ DMA [ 805.325779] ata1.00: cmd c8/00:00:40:63:59/00:00:00:00:00/e3 tag 0 dma 131072 in [ 805.325783] res 51/40:5d:e3:63:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 805.325791] ata1.00: status: { DRDY ERR } [ 805.325797] ata1.00: error: { UNC } [ 805.348375] ata1.00: configured for UDMA/100 [ 805.348399] ata1: EH complete [ 809.613703] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 809.613713] ata1.00: BMDMA stat 0x24 [ 809.613722] ata1.00: failed command: READ DMA [ 809.613739] ata1.00: cmd c8/00:00:40:63:59/00:00:00:00:00/e3 tag 0 dma 131072 in [ 809.613743] res 51/40:5d:e3:63:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 809.613751] ata1.00: status: { DRDY ERR } [ 809.613757] ata1.00: error: { UNC } [ 809.636371] ata1.00: configured for UDMA/100 [ 809.636393] ata1: EH complete [ 813.990762] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 813.990773] ata1.00: BMDMA stat 0x24 [ 813.990781] ata1.00: failed command: READ DMA [ 813.990798] ata1.00: cmd c8/00:00:40:63:59/00:00:00:00:00/e3 tag 0 dma 131072 in [ 813.990802] res 51/40:5d:e3:63:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 813.990810] ata1.00: status: { DRDY ERR } [ 813.990816] ata1.00: error: { UNC } [ 814.012400] ata1.00: configured for UDMA/100 [ 814.012423] sd 0:0:0:0: [sda] Unhandled sense code [ 814.012429] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 814.012439] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 814.012450] Descriptor sense data with sense descriptors (in hex): [ 814.012455] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 814.012479] 03 59 63 e3 [ 814.012490] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 814.012504] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 03 59 63 40 00 01 00 00 [ 814.012525] end_request: I/O error, dev sda, sector 56189923 [ 814.012552] ata1: EH complete [ 818.378657] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 818.378667] ata1.00: BMDMA stat 0x24 [ 818.378676] ata1.00: failed command: READ DMA [ 818.378693] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 818.378697] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 818.378705] ata1.00: status: { DRDY ERR } [ 818.378711] ata1.00: error: { UNC } [ 818.728416] ata1.00: configured for UDMA/100 [ 818.728438] ata1: EH complete [ 822.989604] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 822.989615] ata1.00: BMDMA stat 0x24 [ 822.989623] ata1.00: failed command: READ DMA [ 822.989640] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 822.989644] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 822.989652] ata1.00: status: { DRDY ERR } [ 822.989658] ata1.00: error: { UNC } [ 823.012427] ata1.00: configured for UDMA/100 [ 823.012448] ata1: EH complete [ 827.264708] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 827.264718] ata1.00: BMDMA stat 0x24 [ 827.264727] ata1.00: failed command: READ DMA [ 827.264744] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 827.264748] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 827.264756] ata1.00: status: { DRDY ERR } [ 827.264762] ata1.00: error: { UNC } [ 827.288448] ata1.00: configured for UDMA/100 [ 827.288469] ata1: EH complete [ 831.539405] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 831.539416] ata1.00: BMDMA stat 0x24 [ 831.539424] ata1.00: failed command: READ DMA [ 831.539442] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 831.539445] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 831.539453] ata1.00: status: { DRDY ERR } [ 831.539459] ata1.00: error: { UNC } [ 831.560407] ata1.00: configured for UDMA/100 [ 831.560429] ata1: EH complete [ 835.903152] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 835.903163] ata1.00: BMDMA stat 0x24 [ 835.903172] ata1.00: failed command: READ DMA [ 835.903189] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 835.903193] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 835.903201] ata1.00: status: { DRDY ERR } [ 835.903207] ata1.00: error: { UNC } [ 835.924461] ata1.00: configured for UDMA/100 [ 835.924483] ata1: EH complete [ 840.177840] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 840.177851] ata1.00: BMDMA stat 0x24 [ 840.177859] ata1.00: failed command: READ DMA [ 840.177876] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 840.177880] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 840.177888] ata1.00: status: { DRDY ERR } [ 840.177894] ata1.00: error: { UNC } [ 840.200483] ata1.00: configured for UDMA/100 [ 840.200506] sd 0:0:0:0: [sda] Unhandled sense code [ 840.200512] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 840.200522] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 840.200533] Descriptor sense data with sense descriptors (in hex): [ 840.200539] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 840.200563] 03 59 61 b4 [ 840.200573] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 840.200588] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 03 59 61 b0 00 00 08 00 [ 840.200610] end_request: I/O error, dev sda, sector 56189364 [ 840.200639] ata1: EH complete [ 844.463672] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 844.463683] ata1.00: BMDMA stat 0x24 [ 844.463691] ata1.00: failed command: READ DMA [ 844.463709] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 844.463712] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 844.463720] ata1.00: status: { DRDY ERR } [ 844.463726] ata1.00: error: { UNC } [ 844.532452] ata1.00: configured for UDMA/100 [ 844.532470] ata1: EH complete [ 848.782893] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 848.782903] ata1.00: BMDMA stat 0x24 [ 848.782911] ata1.00: failed command: READ DMA [ 848.782929] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 848.782932] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 848.782940] ata1.00: status: { DRDY ERR } [ 848.782946] ata1.00: error: { UNC } [ 848.804384] ata1.00: configured for UDMA/100 [ 848.804405] ata1: EH complete [ 853.057604] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 853.057615] ata1.00: BMDMA stat 0x24 [ 853.057624] ata1.00: failed command: READ DMA [ 853.057641] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 853.057645] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 853.057653] ata1.00: status: { DRDY ERR } [ 853.057659] ata1.00: error: { UNC } [ 853.080447] ata1.00: configured for UDMA/100 [ 853.080468] ata1: EH complete [ 857.421354] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 857.421365] ata1.00: BMDMA stat 0x24 [ 857.421373] ata1.00: failed command: READ DMA [ 857.421390] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 857.421394] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 857.421402] ata1.00: status: { DRDY ERR } [ 857.421408] ata1.00: error: { UNC } [ 857.444448] ata1.00: configured for UDMA/100 [ 857.444469] ata1: EH complete [ 861.696061] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 861.696071] ata1.00: BMDMA stat 0x24 [ 861.696080] ata1.00: failed command: READ DMA [ 861.696097] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 861.696101] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 861.696109] ata1.00: status: { DRDY ERR } [ 861.696115] ata1.00: error: { UNC } [ 861.720450] ata1.00: configured for UDMA/100 [ 861.720471] ata1: EH complete [ 865.970761] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 865.970771] ata1.00: BMDMA stat 0x24 [ 865.970780] ata1.00: failed command: READ DMA [ 865.970797] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 865.970801] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 865.970809] ata1.00: status: { DRDY ERR } [ 865.970815] ata1.00: error: { UNC } [ 865.992363] ata1.00: configured for UDMA/100 [ 865.992390] sd 0:0:0:0: [sda] Unhandled sense code [ 865.992396] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 865.992406] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 865.992418] Descriptor sense data with sense descriptors (in hex): [ 865.992423] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 865.992447] 03 59 61 b4 [ 865.992458] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 865.992472] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 03 59 61 b0 00 00 08 00 [ 865.992494] end_request: I/O error, dev sda, sector 56189364 [ 865.992534] ata1: EH complete [ 875.767023] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 875.767034] ata1.00: BMDMA stat 0x24 [ 875.767042] ata1.00: failed command: READ DMA [ 875.767059] ata1.00: cmd c8/00:50:90:da:11/00:00:00:00:00/e3 tag 0 dma 40960 in [ 875.767063] res 51/40:17:c9:da:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 875.767071] ata1.00: status: { DRDY ERR } [ 875.767077] ata1.00: error: { UNC } [ 875.788432] ata1.00: configured for UDMA/100 [ 875.788451] ata1: EH complete [ 880.041719] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 880.041730] ata1.00: BMDMA stat 0x24 [ 880.041738] ata1.00: failed command: READ DMA [ 880.041755] ata1.00: cmd c8/00:50:90:da:11/00:00:00:00:00/e3 tag 0 dma 40960 in [ 880.041759] res 51/40:17:c9:da:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 880.041767] ata1.00: status: { DRDY ERR } [ 880.041773] ata1.00: error: { UNC } [ 880.064413] ata1.00: configured for UDMA/100 [ 880.064430] ata1: EH complete [ 884.394355] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 884.394365] ata1.00: BMDMA stat 0x24 [ 884.394373] ata1.00: failed command: READ DMA [ 884.394391] ata1.00: cmd c8/00:50:90:da:11/00:00:00:00:00/e3 tag 0 dma 40960 in [ 884.394395] res 51/40:17:c9:da:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 884.394403] ata1.00: status: { DRDY ERR } [ 884.394409] ata1.00: error: { UNC } [ 884.416430] ata1.00: configured for UDMA/100 [ 884.416451] ata1: EH complete [ 888.669066] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 888.669077] ata1.00: BMDMA stat 0x24 [ 888.669085] ata1.00: failed command: READ DMA [ 888.669103] ata1.00: cmd c8/00:50:90:da:11/00:00:00:00:00/e3 tag 0 dma 40960 in [ 888.669107] res 51/40:17:c9:da:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 888.669115] ata1.00: status: { DRDY ERR } [ 888.669121] ata1.00: error: { UNC } [ 888.692464] ata1.00: configured for UDMA/100 [ 888.692485] ata1: EH complete [ 892.943771] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 892.943781] ata1.00: BMDMA stat 0x24 [ 892.943790] ata1.00: failed command: READ DMA [ 892.943807] ata1.00: cmd c8/00:50:90:da:11/00:00:00:00:00/e3 tag 0 dma 40960 in [ 892.943811] res 51/40:17:c9:da:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 892.943819] ata1.00: status: { DRDY ERR } [ 892.943825] ata1.00: error: { UNC } [ 892.964452] ata1.00: configured for UDMA/100 [ 892.964474] ata1: EH complete [ 897.218468] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 897.218478] ata1.00: BMDMA stat 0x24 [ 897.218487] ata1.00: failed command: READ DMA [ 897.218504] ata1.00: cmd c8/00:50:90:da:11/00:00:00:00:00/e3 tag 0 dma 40960 in [ 897.218508] res 51/40:17:c9:da:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 897.218516] ata1.00: status: { DRDY ERR } [ 897.218522] ata1.00: error: { UNC } [ 897.240361] ata1.00: configured for UDMA/100 [ 897.240388] sd 0:0:0:0: [sda] Unhandled sense code [ 897.240394] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 897.240404] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 897.240415] Descriptor sense data with sense descriptors (in hex): [ 897.240421] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 897.240445] 03 11 da c9 [ 897.240455] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 897.240469] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 03 11 da 90 00 00 50 00 [ 897.240492] end_request: I/O error, dev sda, sector 51501769 [ 897.240527] ata1: EH complete [ 901.771417] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 901.771428] ata1.00: BMDMA stat 0x24 [ 901.771436] ata1.00: failed command: READ DMA [ 901.771453] ata1.00: cmd c8/00:30:e8:dc:11/00:00:00:00:00/e3 tag 0 dma 24576 in [ 901.771457] res 51/40:08:10:dd:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 901.771465] ata1.00: status: { DRDY ERR } [ 901.771471] ata1.00: error: { UNC } [ 901.864378] ata1.00: configured for UDMA/100 [ 901.864395] ata1: EH complete [ 906.190855] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 906.190865] ata1.00: BMDMA stat 0x24 [ 906.190873] ata1.00: failed command: READ DMA [ 906.190890] ata1.00: cmd c8/00:30:e8:dc:11/00:00:00:00:00/e3 tag 0 dma 24576 in [ 906.190893] res 51/40:08:10:dd:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 906.190901] ata1.00: status: { DRDY ERR } [ 906.190907] ata1.00: error: { UNC } [ 906.212364] ata1.00: configured for UDMA/100 [ 906.212380] ata1: EH complete [ 910.465551] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 910.465562] ata1.00: BMDMA stat 0x24 [ 910.465570] ata1.00: failed command: READ DMA [ 910.465587] ata1.00: cmd c8/00:30:e8:dc:11/00:00:00:00:00/e3 tag 0 dma 24576 in [ 910.465591] res 51/40:08:10:dd:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 910.465599] ata1.00: status: { DRDY ERR } [ 910.465605] ata1.00: error: { UNC } [ 910.488393] ata1.00: configured for UDMA/100 [ 910.488409] ata1: EH complete [ 914.740256] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 914.740266] ata1.00: BMDMA stat 0x24 [ 914.740274] ata1.00: failed command: READ DMA [ 914.740291] ata1.00: cmd c8/00:30:e8:dc:11/00:00:00:00:00/e3 tag 0 dma 24576 in [ 914.740295] res 51/40:08:10:dd:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 914.740303] ata1.00: status: { DRDY ERR } [ 914.740308] ata1.00: error: { UNC } [ 914.764371] ata1.00: configured for UDMA/100 [ 914.764387] ata1: EH complete [ 919.014961] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 919.014971] ata1.00: BMDMA stat 0x24 [ 919.014979] ata1.00: failed command: READ DMA [ 919.014996] ata1.00: cmd c8/00:30:e8:dc:11/00:00:00:00:00/e3 tag 0 dma 24576 in [ 919.015000] res 51/40:08:10:dd:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 919.015008] ata1.00: status: { DRDY ERR } [ 919.015014] ata1.00: error: { UNC } [ 919.036404] ata1.00: configured for UDMA/100 [ 919.036431] ata1: EH complete [ 923.289690] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 923.289701] ata1.00: BMDMA stat 0x24 [ 923.289709] ata1.00: failed command: READ DMA [ 923.289726] ata1.00: cmd c8/00:30:e8:dc:11/00:00:00:00:00/e3 tag 0 dma 24576 in [ 923.289730] res 51/40:08:10:dd:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 923.289738] ata1.00: status: { DRDY ERR } [ 923.289744] ata1.00: error: { UNC } [ 923.312372] ata1.00: configured for UDMA/100 [ 923.312397] sd 0:0:0:0: [sda] Unhandled sense code [ 923.312403] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 923.312413] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 923.312424] Descriptor sense data with sense descriptors (in hex): [ 923.312430] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 923.312454] 03 11 dd 10 [ 923.312465] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 923.312479] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 03 11 dc e8 00 00 30 00 [ 923.312500] end_request: I/O error, dev sda, sector 51502352 [ 923.312540] ata1: EH complete [ 941.078790] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 941.078800] ata1.00: BMDMA stat 0x24 [ 941.078809] ata1.00: failed command: READ DMA [ 941.078826] ata1.00: cmd c8/00:10:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 8192 in [ 941.078829] res 51/40:0b:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 941.078837] ata1.00: status: { DRDY ERR } [ 941.078843] ata1.00: error: { UNC } [ 941.100442] ata1.00: configured for UDMA/100 [ 941.100462] ata1: EH complete [ 945.353521] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 945.353531] ata1.00: BMDMA stat 0x24 [ 945.353540] ata1.00: failed command: READ DMA [ 945.353557] ata1.00: cmd c8/00:10:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 8192 in [ 945.353561] res 51/40:0b:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 945.353569] ata1.00: status: { DRDY ERR } [ 945.353575] ata1.00: error: { UNC } [ 945.376517] ata1.00: configured for UDMA/100 [ 945.376539] ata1: EH complete [ 949.628257] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 949.628268] ata1.00: BMDMA stat 0x24 [ 949.628276] ata1.00: failed command: READ DMA [ 949.628294] ata1.00: cmd c8/00:10:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 8192 in [ 949.628297] res 51/40:0b:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 949.628305] ata1.00: status: { DRDY ERR } [ 949.628311] ata1.00: error: { UNC } [ 949.652444] ata1.00: configured for UDMA/100 [ 949.652465] ata1: EH complete [ 953.902983] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 953.902993] ata1.00: BMDMA stat 0x24 [ 953.903001] ata1.00: failed command: READ DMA [ 953.903019] ata1.00: cmd c8/00:10:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 8192 in [ 953.903022] res 51/40:0b:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 953.903030] ata1.00: status: { DRDY ERR } [ 953.903036] ata1.00: error: { UNC } [ 953.924451] ata1.00: configured for UDMA/100 [ 953.924472] ata1: EH complete [ 958.177703] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 958.177714] ata1.00: BMDMA stat 0x24 [ 958.177722] ata1.00: failed command: READ DMA [ 958.177740] ata1.00: cmd c8/00:10:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 8192 in [ 958.177744] res 51/40:0b:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 958.177752] ata1.00: status: { DRDY ERR } [ 958.177758] ata1.00: error: { UNC } [ 958.200415] ata1.00: configured for UDMA/100 [ 958.200436] ata1: EH complete [ 962.530355] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 962.530365] ata1.00: BMDMA stat 0x24 [ 962.530374] ata1.00: failed command: READ DMA [ 962.530391] ata1.00: cmd c8/00:10:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 8192 in [ 962.530395] res 51/40:0b:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 962.530403] ata1.00: status: { DRDY ERR } [ 962.530409] ata1.00: error: { UNC } [ 962.552368] ata1.00: configured for UDMA/100 [ 962.552395] sd 0:0:0:0: [sda] Unhandled sense code [ 962.552401] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 962.552411] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 962.552423] Descriptor sense data with sense descriptors (in hex): [ 962.552428] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 962.552452] 03 11 e1 f5 [ 962.552463] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 962.552477] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 03 11 e1 f0 00 00 10 00 [ 962.552499] end_request: I/O error, dev sda, sector 51503605 [ 962.552534] ata1: EH complete [ 966.827316] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 966.827327] ata1.00: BMDMA stat 0x24 [ 966.827335] ata1.00: failed command: READ DMA [ 966.827353] ata1.00: cmd c8/00:08:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 4096 in [ 966.827356] res 51/40:03:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 966.827364] ata1.00: status: { DRDY ERR } [ 966.827370] ata1.00: error: { UNC } [ 967.056440] ata1.00: configured for UDMA/100 [ 967.056460] ata1: EH complete [ 971.302419] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 971.302429] ata1.00: BMDMA stat 0x24 [ 971.302438] ata1.00: failed command: READ DMA [ 971.302455] ata1.00: cmd c8/00:08:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 4096 in [ 971.302459] res 51/40:03:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 971.302467] ata1.00: status: { DRDY ERR } [ 971.302473] ata1.00: error: { UNC } [ 971.324373] ata1.00: configured for UDMA/100 [ 971.324397] ata1: EH complete [ 975.577139] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 975.577150] ata1.00: BMDMA stat 0x24 [ 975.577158] ata1.00: failed command: READ DMA [ 975.577176] ata1.00: cmd c8/00:08:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 4096 in [ 975.577179] res 51/40:03:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 975.577187] ata1.00: status: { DRDY ERR } [ 975.577193] ata1.00: error: { UNC } [ 975.600412] ata1.00: configured for UDMA/100 [ 975.600433] ata1: EH complete [ 979.851870] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 979.851880] ata1.00: BMDMA stat 0x24 [ 979.851889] ata1.00: failed command: READ DMA [ 979.851906] ata1.00: cmd c8/00:08:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 4096 in [ 979.851910] res 51/40:03:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 979.851918] ata1.00: status: { DRDY ERR } [ 979.851924] ata1.00: error: { UNC } [ 979.876420] ata1.00: configured for UDMA/100 [ 979.876442] ata1: EH complete [ 984.204506] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 984.204517] ata1.00: BMDMA stat 0x24 [ 984.204525] ata1.00: failed command: READ DMA [ 984.204542] ata1.00: cmd c8/00:08:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 4096 in [ 984.204546] res 51/40:03:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 984.204554] ata1.00: status: { DRDY ERR } [ 984.204560] ata1.00: error: { UNC } [ 984.228371] ata1.00: configured for UDMA/100 [ 984.228390] ata1: EH complete [ 988.479227] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 988.479237] ata1.00: BMDMA stat 0x24 [ 988.479245] ata1.00: failed command: READ DMA [ 988.479263] ata1.00: cmd c8/00:08:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 4096 in [ 988.479266] res 51/40:03:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 988.479275] ata1.00: status: { DRDY ERR } [ 988.479280] ata1.00: error: { UNC } [ 988.500467] ata1.00: configured for UDMA/100 [ 988.500489] sd 0:0:0:0: [sda] Unhandled sense code [ 988.500495] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 988.500505] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 988.500516] Descriptor sense data with sense descriptors (in hex): [ 988.500522] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 988.500546] 03 11 e1 f5 [ 988.500556] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 988.500571] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 03 11 e1 f0 00 00 08 00 [ 988.500592] end_request: I/O error, dev sda, sector 51503605 [ 988.500626] ata1: EH complete [ 1089.133557] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1089.133568] ata1.00: BMDMA stat 0x24 [ 1089.133576] ata1.00: failed command: READ DMA [ 1089.133593] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1089.133597] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1089.133605] ata1.00: status: { DRDY ERR } [ 1089.133611] ata1.00: error: { UNC } [ 1089.316398] ata1.00: configured for UDMA/100 [ 1089.316421] ata1: EH complete [ 1093.564043] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1093.564054] ata1.00: BMDMA stat 0x24 [ 1093.564062] ata1.00: failed command: READ DMA [ 1093.564079] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1093.564083] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1093.564091] ata1.00: status: { DRDY ERR } [ 1093.564097] ata1.00: error: { UNC } [ 1093.588411] ata1.00: configured for UDMA/100 [ 1093.588432] ata1: EH complete [ 1097.838655] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1097.838665] ata1.00: BMDMA stat 0x24 [ 1097.838674] ata1.00: failed command: READ DMA [ 1097.838691] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1097.838695] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1097.838703] ata1.00: status: { DRDY ERR } [ 1097.838709] ata1.00: error: { UNC } [ 1097.860455] ata1.00: configured for UDMA/100 [ 1097.860476] ata1: EH complete [ 1102.202339] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1102.202350] ata1.00: BMDMA stat 0x24 [ 1102.202358] ata1.00: failed command: READ DMA [ 1102.202376] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1102.202379] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1102.202388] ata1.00: status: { DRDY ERR } [ 1102.202393] ata1.00: error: { UNC } [ 1102.224364] ata1.00: configured for UDMA/100 [ 1102.224383] ata1: EH complete [ 1106.477002] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1106.477012] ata1.00: BMDMA stat 0x24 [ 1106.477020] ata1.00: failed command: READ DMA [ 1106.477037] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1106.477041] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1106.477049] ata1.00: status: { DRDY ERR } [ 1106.477055] ata1.00: error: { UNC } [ 1106.500408] ata1.00: configured for UDMA/100 [ 1106.500428] ata1: EH complete [ 1110.751664] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1110.751675] ata1.00: BMDMA stat 0x24 [ 1110.751683] ata1.00: failed command: READ DMA [ 1110.751701] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1110.751704] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1110.751712] ata1.00: status: { DRDY ERR } [ 1110.751718] ata1.00: error: { UNC } [ 1110.772387] ata1.00: configured for UDMA/100 [ 1110.772414] sd 0:0:0:0: [sda] Unhandled sense code [ 1110.772421] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1110.772431] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 1110.772442] Descriptor sense data with sense descriptors (in hex): [ 1110.772448] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1110.772472] 03 59 61 b4 [ 1110.772483] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 1110.772497] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 03 59 61 b0 00 00 08 00 [ 1110.772519] end_request: I/O error, dev sda, sector 56189364 [ 1110.772558] ata1: EH complete [ 1115.026337] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1115.026348] ata1.00: BMDMA stat 0x24 [ 1115.026356] ata1.00: failed command: READ DMA [ 1115.026373] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1115.026377] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1115.026385] ata1.00: status: { DRDY ERR } [ 1115.026391] ata1.00: error: { UNC } [ 1115.048370] ata1.00: configured for UDMA/100 [ 1115.048393] ata1: EH complete [ 1119.301006] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1119.301017] ata1.00: BMDMA stat 0x24 [ 1119.301025] ata1.00: failed command: READ DMA [ 1119.301043] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1119.301046] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1119.301054] ata1.00: status: { DRDY ERR } [ 1119.301071] ata1.00: error: { UNC } [ 1119.324413] ata1.00: configured for UDMA/100 [ 1119.324442] ata1: EH complete [ 1123.664737] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1123.664748] ata1.00: BMDMA stat 0x24 [ 1123.664756] ata1.00: failed command: READ DMA [ 1123.664774] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1123.664777] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1123.664785] ata1.00: status: { DRDY ERR } [ 1123.664791] ata1.00: error: { UNC } [ 1123.688383] ata1.00: configured for UDMA/100 [ 1123.688409] ata1: EH complete [ 1127.939428] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1127.939439] ata1.00: BMDMA stat 0x24 [ 1127.939447] ata1.00: failed command: READ DMA [ 1127.939465] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1127.939469] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1127.939477] ata1.00: status: { DRDY ERR } [ 1127.939483] ata1.00: error: { UNC } [ 1127.960375] ata1.00: configured for UDMA/100 [ 1127.960393] ata1: EH complete [ 1132.214112] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1132.214123] ata1.00: BMDMA stat 0x24 [ 1132.214131] ata1.00: failed command: READ DMA [ 1132.214149] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1132.214152] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1132.214160] ata1.00: status: { DRDY ERR } [ 1132.214166] ata1.00: error: { UNC } [ 1132.236386] ata1.00: configured for UDMA/100 [ 1132.236403] ata1: EH complete [ 1136.488801] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1136.488811] ata1.00: BMDMA stat 0x24 [ 1136.488818] ata1.00: failed command: READ DMA [ 1136.488836] ata1.00: cmd c8/00:08:b0:61:59/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1136.488839] res 51/40:04:b4:61:59/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1136.488847] ata1.00: status: { DRDY ERR } [ 1136.488853] ata1.00: error: { UNC } [ 1136.512366] ata1.00: configured for UDMA/100 [ 1136.512388] sd 0:0:0:0: [sda] Unhandled sense code [ 1136.512394] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1136.512404] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 1136.512416] Descriptor sense data with sense descriptors (in hex): [ 1136.512421] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1136.512445] 03 59 61 b4 [ 1136.512456] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 1136.512470] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 03 59 61 b0 00 00 08 00 [ 1136.512492] end_request: I/O error, dev sda, sector 56189364 [ 1136.512522] ata1: EH complete [ 1724.820239] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1724.820250] ata1.00: BMDMA stat 0x24 [ 1724.820259] ata1.00: failed command: READ DMA [ 1724.820277] ata1.00: cmd c8/00:08:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1724.820280] res 51/40:03:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1724.820288] ata1.00: status: { DRDY ERR } [ 1724.820294] ata1.00: error: { UNC } [ 1724.912671] ata1.00: configured for UDMA/100 [ 1724.912691] ata1: EH complete [ 1729.239517] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1729.239528] ata1.00: BMDMA stat 0x24 [ 1729.239536] ata1.00: failed command: READ DMA [ 1729.239553] ata1.00: cmd c8/00:08:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1729.239557] res 51/40:03:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1729.239565] ata1.00: status: { DRDY ERR } [ 1729.239571] ata1.00: error: { UNC } [ 1729.260645] ata1.00: configured for UDMA/100 [ 1729.260666] ata1: EH complete [ 1733.514112] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1733.514123] ata1.00: BMDMA stat 0x24 [ 1733.514131] ata1.00: failed command: READ DMA [ 1733.514149] ata1.00: cmd c8/00:08:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1733.514152] res 51/40:03:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1733.514160] ata1.00: status: { DRDY ERR } [ 1733.514166] ata1.00: error: { UNC } [ 1733.536677] ata1.00: configured for UDMA/100 [ 1733.536698] ata1: EH complete [ 1737.788707] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1737.788717] ata1.00: BMDMA stat 0x24 [ 1737.788726] ata1.00: failed command: READ DMA [ 1737.788743] ata1.00: cmd c8/00:08:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1737.788747] res 51/40:03:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1737.788755] ata1.00: status: { DRDY ERR } [ 1737.788761] ata1.00: error: { UNC } [ 1737.812524] ata1.00: configured for UDMA/100 [ 1737.812546] ata1: EH complete [ 1742.063330] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1742.063340] ata1.00: BMDMA stat 0x24 [ 1742.063349] ata1.00: failed command: READ DMA [ 1742.063366] ata1.00: cmd c8/00:08:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1742.063369] res 51/40:03:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1742.063377] ata1.00: status: { DRDY ERR } [ 1742.063383] ata1.00: error: { UNC } [ 1742.084551] ata1.00: configured for UDMA/100 [ 1742.084568] ata1: EH complete [ 1746.337923] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 1746.337934] ata1.00: BMDMA stat 0x24 [ 1746.337943] ata1.00: failed command: READ DMA [ 1746.337961] ata1.00: cmd c8/00:08:f0:e1:11/00:00:00:00:00/e3 tag 0 dma 4096 in [ 1746.337964] res 51/40:03:f5:e1:11/00:00:00:00:00/e3 Emask 0x9 (media error) [ 1746.337972] ata1.00: status: { DRDY ERR } [ 1746.337978] ata1.00: error: { UNC } [ 1746.360659] ata1.00: configured for UDMA/100 [ 1746.360685] sd 0:0:0:0: [sda] Unhandled sense code [ 1746.360691] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 1746.360701] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 1746.360713] Descriptor sense data with sense descriptors (in hex): [ 1746.360718] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1746.360742] 03 11 e1 f5 [ 1746.360753] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 1746.360767] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 03 11 e1 f0 00 00 08 00 [ 1746.360789] end_request: I/O error, dev sda, sector 51503605 [ 1746.360830] ata1: EH complete