[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-28-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 21:21:01 UTC 2011 (Ubuntu 2.6.32-28.55-generic 2.6.32.27+drm33.12) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-AFFFF uncachable [ 0.000000] B0000-BFFFF write-combining [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 0D0000000 mask FF8000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] modified: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] modified: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001fff0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 1fff0000 @ 10000-15000 [ 0.000000] RAMDISK: 1f846000 - 1ffdf832 [ 0.000000] ACPI: RSDP 000f7540 00014 (v00 KT400 ) [ 0.000000] ACPI: RSDT 1fff3000 0002C (v01 KT400 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 1fff3040 00074 (v01 KT400 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 1fff30c0 04368 (v01 KT400 AWRDACPI 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS 1fff0000 00040 [ 0.000000] ACPI: APIC 1fff7440 0006E (v01 KT400 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1fff0000 [ 0.000000] low ram: 0 - 1fff0000 [ 0.000000] node 0 low ram: 00000000 - 1fff0000 [ 0.000000] node 0 bootmap 00011000 - 00015000 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008e0ed8] TEXT DATA BSS ==> [0000100000 - 00008e0ed8] [ 0.000000] #4 [001f846000 - 001ffdf832] RAMDISK ==> [001f846000 - 001ffdf832] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008e1000 - 00008e408a] BRK ==> [00008e1000 - 00008e408a] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000015000] BOOTMAP ==> [0000011000 - 0000015000] [ 0.000000] found SMP MP-table at [c00f5b50] f5b50 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001fff0 [ 0.000000] HighMem 0x0001fff0 -> 0x0001fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001fff0 [ 0.000000] On node 0 totalpages: 130943 [ 0.000000] free_area_init_node: node 0, pgdat c079c8c0, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 125968 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129919 [ 0.000000] Kernel command line: root=UUID=f46459b0-d0d4-4743-b90e-15961860e425 ro splash vga=792 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2620800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 500500k/524224k available (4685k kernel code, 23016k reserved, 2125k data, 660k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 0.000000] .init : 0xc07a7000 - 0xc084c000 ( 660 kB) [ 0.000000] .data : 0xc05936e7 - 0xc07a6e88 (2125 kB) [ 0.000000] .text : 0xc0100000 - 0xc05936e7 (4685 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1299.706 MHz processor. [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 2599.41 BogoMIPS (lpj=5198824) [ 0.004067] Security Framework initialized [ 0.004130] AppArmor: AppArmor initialized [ 0.004151] Mount-cache hash table entries: 512 [ 0.004531] Initializing cgroup subsys ns [ 0.004557] Initializing cgroup subsys cpuacct [ 0.004569] Initializing cgroup subsys memory [ 0.004594] Initializing cgroup subsys devices [ 0.004604] Initializing cgroup subsys freezer [ 0.004613] Initializing cgroup subsys net_cls [ 0.004661] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004674] CPU: L2 Cache: 64K (64 bytes/line) [ 0.004688] mce: CPU supports 4 MCE banks [ 0.004829] Performance Events: AMD PMU driver. [ 0.004860] ... version: 0 [ 0.004868] ... bit width: 48 [ 0.004876] ... generic registers: 4 [ 0.004884] ... value mask: 0000ffffffffffff [ 0.004893] ... max period: 00007fffffffffff [ 0.004902] ... fixed-purpose events: 0 [ 0.004909] ... event mask: 000000000000000f [ 0.004923] Checking 'hlt' instruction... OK. [ 0.021254] SMP alternatives: switching to UP code [ 0.033792] Freeing SMP alternatives: 19k freed [ 0.033962] ACPI: Core revision 20090903 [ 0.052062] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.052108] ftrace: allocating 21796 entries in 43 pages [ 0.060331] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.065236] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.105016] CPU0: AMD Duron(tm) processor stepping 01 [ 0.108001] Brought up 1 CPUs [ 0.108001] Total of 1 processors activated (2599.41 BogoMIPS). [ 0.108001] CPU0 attaching NULL sched-domain. [ 0.108001] devtmpfs: initialized [ 0.108001] regulator: core version 0.5 [ 0.108001] Time: 16:57:49 Date: 03/26/11 [ 0.108001] NET: Registered protocol family 16 [ 0.108001] EISA bus registered [ 0.108001] ACPI: bus type pci registered [ 0.117372] PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=1 [ 0.117384] PCI: Using configuration type 1 for base access [ 0.119882] bio: create slab at 0 [ 0.121338] ACPI: EC: Look up EC in DSDT [ 0.132081] ACPI: Interpreter enabled [ 0.132114] ACPI: (supports S0 S1 S4 S5) [ 0.132166] ACPI: Using IOAPIC for interrupt routing [ 0.142690] ACPI: No dock devices found. [ 0.142955] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.143169] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff] [ 0.143281] pci 0000:00:01.0: supports D1 [ 0.143329] pci 0000:00:09.0: reg 10 32bit mmio: [0xe2010000-0xe20107ff] [ 0.143340] pci 0000:00:09.0: reg 14 io port: [0xc000-0xc07f] [ 0.143384] pci 0000:00:09.0: supports D2 [ 0.143388] pci 0000:00:09.0: PME# supported from D2 D3hot D3cold [ 0.143402] pci 0000:00:09.0: PME# disabled [ 0.143443] pci 0000:00:0a.0: reg 10 32bit mmio: [0xe2000000-0xe200ffff] [ 0.143453] pci 0000:00:0a.0: reg 14 io port: [0xc400-0xc407] [ 0.143494] pci 0000:00:0a.0: supports D1 D2 [ 0.143498] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.143509] pci 0000:00:0a.0: PME# disabled [ 0.143643] pci 0000:00:0b.0: reg 10 io port: [0xc800-0xc8ff] [ 0.143653] pci 0000:00:0b.0: reg 14 32bit mmio: [0xe2011000-0xe20110ff] [ 0.143696] pci 0000:00:0b.0: supports D1 D2 [ 0.143699] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot [ 0.143710] pci 0000:00:0b.0: PME# disabled [ 0.143774] pci 0000:00:10.0: reg 20 io port: [0xcc00-0xcc1f] [ 0.143803] pci 0000:00:10.0: supports D1 D2 [ 0.143807] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.143819] pci 0000:00:10.0: PME# disabled [ 0.143886] pci 0000:00:10.1: reg 20 io port: [0xd000-0xd01f] [ 0.143916] pci 0000:00:10.1: supports D1 D2 [ 0.143920] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.143931] pci 0000:00:10.1: PME# disabled [ 0.144029] pci 0000:00:10.2: reg 20 io port: [0xd400-0xd41f] [ 0.144151] pci 0000:00:10.2: supports D1 D2 [ 0.144155] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.144167] pci 0000:00:10.2: PME# disabled [ 0.144211] pci 0000:00:10.3: reg 10 32bit mmio: [0xe2012000-0xe20120ff] [ 0.144258] pci 0000:00:10.3: supports D1 D2 [ 0.144262] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.144273] pci 0000:00:10.3: PME# disabled [ 0.144350] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.144367] pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM [ 0.144379] pci 0000:00:11.0: quirk: region 5000-500f claimed by vt8235 SMB [ 0.144458] pci 0000:00:11.1: reg 20 io port: [0xd800-0xd80f] [ 0.144634] pci 0000:00:11.5: reg 10 io port: [0xdc00-0xdcff] [ 0.144683] pci 0000:00:11.5: supports D1 D2 [ 0.144724] pci 0000:00:12.0: reg 10 io port: [0xe400-0xe4ff] [ 0.144734] pci 0000:00:12.0: reg 14 32bit mmio: [0xe2013000-0xe20130ff] [ 0.144777] pci 0000:00:12.0: supports D2 [ 0.144781] pci 0000:00:12.0: PME# supported from D2 [ 0.144791] pci 0000:00:12.0: PME# disabled [ 0.144860] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe0ffffff] [ 0.144869] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.144892] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.144955] pci 0000:00:01.0: bridge 32bit mmio: [0xe0000000-0xe1ffffff] [ 0.144963] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.144974] pci_bus 0000:00: on NUMA node 0 [ 0.144992] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.191681] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.192216] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) [ 0.192620] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.193018] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) [ 0.193276] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.193615] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.193951] ACPI: PCI Interrupt Link [LNK0] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.194195] ACPI: PCI Interrupt Link [LNK1] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.194569] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0 [ 0.194947] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0 [ 0.195267] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0 [ 0.195639] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0 [ 0.196081] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.196104] vgaarb: loaded [ 0.196469] SCSI subsystem initialized [ 0.196682] libata version 3.00 loaded. [ 0.196991] usbcore: registered new interface driver usbfs [ 0.197033] usbcore: registered new interface driver hub [ 0.197108] usbcore: registered new device driver usb [ 0.197585] ACPI: WMI: Mapper loaded [ 0.197605] PCI: Using ACPI for IRQ routing [ 0.198007] NetLabel: Initializing [ 0.198019] NetLabel: domain hash size = 128 [ 0.198026] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.198059] NetLabel: unlabeled traffic allowed by default [ 0.198174] Switching to clocksource tsc [ 0.201015] AppArmor: AppArmor Filesystem Enabled [ 0.201089] pnp: PnP ACPI init [ 0.201139] ACPI: bus type pnp registered [ 0.210100] pnp: PnP ACPI: found 15 devices [ 0.210124] ACPI: ACPI bus type pnp unregistered [ 0.210137] PnPBIOS: Disabled by ACPI PNP [ 0.210172] system 00:00: iomem range 0xd0000-0xd3fff has been reserved [ 0.210183] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 0.210195] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.210206] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.210218] system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved [ 0.210233] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.210244] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.210255] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved [ 0.210268] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.210281] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.210293] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.210315] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.210327] system 00:02: ioport range 0x294-0x297 has been reserved [ 0.245513] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.245536] pci 0000:00:01.0: IO window: disabled [ 0.245549] pci 0000:00:01.0: MEM window: 0xe0000000-0xe1ffffff [ 0.245588] pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff [ 0.245709] pci 0000:00:01.0: setting latency timer to 64 [ 0.245719] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.245724] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.245729] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe1ffffff] [ 0.245734] pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] [ 0.245821] NET: Registered protocol family 2 [ 0.246013] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.246741] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.247207] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.247721] TCP: Hash tables configured (established 16384 bind 16384) [ 0.247745] TCP reno registered [ 0.247980] NET: Registered protocol family 1 [ 0.248023] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.248243] pci 0000:01:00.0: Boot video device [ 0.248779] cpufreq-nforce2: No nForce2 chipset. [ 0.248862] Scanning for low memory corruption every 60 seconds [ 0.249228] audit: initializing netlink socket (disabled) [ 0.249267] type=2000 audit(1301158669.245:1): initialized [ 0.268004] Trying to unpack rootfs image as initramfs... [ 0.290007] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.298710] VFS: Disk quotas dquot_6.5.2 [ 0.298998] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.300610] fuse init (API version 7.13) [ 0.300960] msgmni has been set to 978 [ 0.306078] alg: No test for stdrng (krng) [ 0.306348] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.306367] io scheduler noop registered [ 0.306375] io scheduler anticipatory registered [ 0.306383] io scheduler deadline registered [ 0.306483] io scheduler cfq registered (default) [ 0.306820] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.306874] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.307087] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.307106] ACPI: Power Button [PWRB] [ 0.307325] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.307338] ACPI: Power Button [PWRF] [ 0.307435] fan PNP0C0B:00: registered as cooling_device0 [ 0.307452] ACPI: Fan [FAN] (on) [ 0.308026] Marking TSC unstable due to TSC halts in idle [ 0.308364] processor LNXCPU:00: registered as cooling_device1 [ 0.312228] Switching to clocksource acpi_pm [ 0.319071] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.319112] ACPI: Thermal Zone [THRM] (27 C) [ 0.327317] isapnp: Scanning for PnP cards... [ 0.333833] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.334102] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.334274] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.334852] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.335153] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.342177] brd: module loaded [ 0.343581] loop: module loaded [ 0.343967] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.393942] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 [ 0.393971] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 0.393988] alloc irq_desc for 20 on node -1 [ 0.393993] alloc kstat_irqs on node -1 [ 0.394010] pata_acpi 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 0.394243] pata_acpi 0000:00:11.1: PCI INT A disabled [ 0.395026] Fixed MDIO Bus: probed [ 0.395200] PPP generic driver version 2.4.2 [ 0.395376] tun: Universal TUN/TAP device driver, 1.6 [ 0.395390] tun: (C) 1999-2004 Max Krasnyansky [ 0.395689] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.400601] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 [ 0.400633] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 0.400650] alloc irq_desc for 21 on node -1 [ 0.400655] alloc kstat_irqs on node -1 [ 0.400673] ehci_hcd 0000:00:10.3: PCI INT D -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.400725] ehci_hcd 0000:00:10.3: EHCI Host Controller [ 0.401026] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 [ 0.401161] ehci_hcd 0000:00:10.3: irq 21, io mem 0xe2012000 [ 0.412531] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00 [ 0.412996] usb usb1: configuration #1 chosen from 1 choice [ 0.413080] hub 1-0:1.0: USB hub found [ 0.413205] hub 1-0:1.0: 6 ports detected [ 0.413352] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.413395] uhci_hcd: USB Universal Host Controller Interface driver [ 0.413530] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.413559] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.413799] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.413850] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000cc00 [ 0.414197] usb usb2: configuration #1 chosen from 1 choice [ 0.414270] hub 2-0:1.0: USB hub found [ 0.414301] hub 2-0:1.0: 2 ports detected [ 0.414433] uhci_hcd 0000:00:10.1: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.414456] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.414692] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.414743] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d000 [ 0.414991] usb usb3: configuration #1 chosen from 1 choice [ 0.415170] hub 3-0:1.0: USB hub found [ 0.415199] hub 3-0:1.0: 2 ports detected [ 0.415328] uhci_hcd 0000:00:10.2: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.415353] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.415473] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.415521] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d400 [ 0.415896] usb usb4: configuration #1 chosen from 1 choice [ 0.415991] hub 4-0:1.0: USB hub found [ 0.420783] hub 4-0:1.0: 2 ports detected [ 0.421191] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.421762] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.421790] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.422253] mice: PS/2 mouse device common for all mice [ 0.422646] rtc_cmos 00:04: RTC can wake from S4 [ 0.422791] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.422863] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.423169] device-mapper: uevent: version 1.0.3 [ 0.423655] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.426777] device-mapper: multipath: version 1.1.0 loaded [ 0.426899] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.427398] EISA: Probing bus 0 at eisa.0 [ 0.427441] Cannot allocate resource for EISA slot 4 [ 0.427449] Cannot allocate resource for EISA slot 5 [ 0.427471] EISA: Detected 0 cards. [ 0.432956] cpuidle: using governor ladder [ 0.433072] cpuidle: using governor menu [ 0.434046] TCP cubic registered [ 0.434497] NET: Registered protocol family 10 [ 0.435667] lo: Disabled Privacy Extensions [ 0.436380] NET: Registered protocol family 17 [ 0.436500] powernow-k8: Processor cpuid 671 not supported [ 0.436653] Using IPI No-Shortcut mode [ 0.436902] PM: Resume from disk failed. [ 0.436932] registered taskstats version 1 [ 0.437428] Magic number: 3:76:996 [ 0.437742] rtc_cmos 00:04: setting system clock to 2011-03-26 16:57:49 UTC (1301158669) [ 0.437759] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.437767] EDD information not available. [ 0.447951] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.028494] isapnp: No Plug & Play device found [ 1.084506] usb 1-5: new high speed USB device using ehci_hcd and address 4 [ 1.152485] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 1.213609] Freeing initrd memory: 7782k freed [ 1.238215] Freeing unused kernel memory: 660k freed [ 1.240519] Write protecting the kernel text: 4688k [ 1.240590] Write protecting the kernel read-only data: 1844k [ 1.314539] udev: starting version 151 [ 1.412146] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 1.602070] usb 2-1: configuration #1 chosen from 1 choice [ 1.797359] Floppy drive(s): fd0 is 1.44M [ 1.843232] FDC 0 is a post-1991 82077 [ 1.844154] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 2.050159] usb 2-2: configuration #1 chosen from 1 choice [ 2.063049] pata_via 0000:00:11.1: version 0.3.4 [ 2.063092] pata_via 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 2.066861] scsi0 : pata_via [ 2.067759] scsi1 : pata_via [ 2.082044] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 2.082084] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 2.089876] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xd800 irq 14 [ 2.089905] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xd808 irq 15 [ 2.100698] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.101624] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23 [ 2.101646] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 [ 2.101664] alloc irq_desc for 23 on node -1 [ 2.101668] alloc kstat_irqs on node -1 [ 2.101687] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23 [ 2.109151] eth0: VIA Rhine II at 0xe2013000, 00:30:18:52:c6:a1, IRQ 23. [ 2.109923] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. [ 2.110006] 8139cp 0000:00:0b.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 2.111937] alloc irq_desc for 17 on node -1 [ 2.111945] alloc kstat_irqs on node -1 [ 2.111962] ohci1394 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.170093] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[e2010000-e20107ff] Max Packet=[2048] IR/IT contexts=[8/8] [ 2.260693] ata1.00: ATA-7: HDT722520DLAT80, V44OA96A, max UDMA/133 [ 2.260721] ata1.00: 390721968 sectors, multi 16: LBA48 [ 2.275623] ata1.01: ATA-7: WDC WD2500JB-00REA0, 20.00K20, max UDMA/100 [ 2.275635] ata1.01: 488397168 sectors, multi 16: LBA48 [ 2.288453] ata1.00: configured for UDMA/133 [ 2.292045] usb 1-5: new high speed USB device using ehci_hcd and address 5 [ 2.296508] ata1.01: configured for UDMA/100 [ 2.296832] scsi 0:0:0:0: Direct-Access ATA HDT722520DLAT80 V44O PQ: 0 ANSI: 5 [ 2.297396] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.298706] scsi 0:0:1:0: Direct-Access ATA WDC WD2500JB-00R 20.0 PQ: 0 ANSI: 5 [ 2.300354] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 2.301165] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 2.301299] sd 0:0:0:0: [sda] Write Protect is off [ 2.301310] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.301366] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.301873] sda: sda1 sda2 sda3 < [ 2.308486] sd 0:0:1:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.324612] sd 0:0:1:0: [sdb] Write Protect is off [ 2.324628] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.324661] sda5 [ 2.333823] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.334120] sda6 sda7 > [ 2.345335] sdb: sdb1 [ 2.352857] sd 0:0:1:0: [sdb] Attached SCSI disk [ 2.352952] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.360383] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 2.464445] ata2.00: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-120, 1.22, max UDMA/66 [ 2.464515] ata2.01: ATAPI: HL-DT-ST GCE-8520B, 1.00, max UDMA/33 [ 2.480314] ata2.00: configured for UDMA/66 [ 2.496283] ata2.01: configured for UDMA/33 [ 2.498138] scsi 1:0:0:0: CD-ROM PIONEER DVD-ROM DVD-120 1.22 PQ: 0 ANSI: 5 [ 2.503058] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray [ 2.503090] Uniform CD-ROM driver Revision: 3.20 [ 2.504347] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.505009] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 2.505994] scsi 1:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8520B 1.00 PQ: 0 ANSI: 5 [ 2.509674] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 2.510833] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 2.511578] sr 1:0:1:0: Attached scsi generic sg3 type 5 [ 2.555052] 8139too Fast Ethernet driver 0.9.28 [ 2.555185] alloc irq_desc for 19 on node -1 [ 2.555190] alloc kstat_irqs on node -1 [ 2.555208] 8139too 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.571460] eth1: RealTek RTL8139 at 0xc800, 00:08:54:37:d7:21, IRQ 19 [ 2.600173] usb 1-5: new high speed USB device using ehci_hcd and address 6 [ 2.668364] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 2.908068] usb 1-5: new high speed USB device using ehci_hcd and address 7 [ 2.976419] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 3.216303] usb 1-5: new high speed USB device using ehci_hcd and address 8 [ 3.284523] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 3.287973] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 3.448353] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001106000000686f] [ 3.532077] usb 1-5: new high speed USB device using ehci_hcd and address 9 [ 3.600401] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 3.840111] usb 1-5: new high speed USB device using ehci_hcd and address 10 [ 3.908359] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 4.148102] usb 1-5: new high speed USB device using ehci_hcd and address 11 [ 4.220479] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 4.460117] usb 1-5: new high speed USB device using ehci_hcd and address 12 [ 4.528543] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 4.768065] usb 1-5: new high speed USB device using ehci_hcd and address 13 [ 4.836382] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 5.076099] usb 1-5: new high speed USB device using ehci_hcd and address 14 [ 5.148358] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 5.388113] usb 1-5: new high speed USB device using ehci_hcd and address 15 [ 5.457529] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 5.700129] usb 1-5: new high speed USB device using ehci_hcd and address 16 [ 5.768525] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 6.008169] usb 1-5: new high speed USB device using ehci_hcd and address 17 [ 6.076352] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 6.316368] usb 1-5: new high speed USB device using ehci_hcd and address 18 [ 6.388522] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 6.572432] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 6.812076] usb 1-5: new high speed USB device using ehci_hcd and address 20 [ 6.880372] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 7.120072] usb 1-5: new high speed USB device using ehci_hcd and address 21 [ 7.188328] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 7.428104] usb 1-5: new high speed USB device using ehci_hcd and address 22 [ 7.496411] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 7.736153] usb 1-5: new high speed USB device using ehci_hcd and address 23 [ 7.804345] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 8.044047] usb 1-5: new high speed USB device using ehci_hcd and address 24 [ 8.116285] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 8.300417] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 8.540049] usb 1-5: new high speed USB device using ehci_hcd and address 26 [ 8.608346] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 8.848060] usb 1-5: new high speed USB device using ehci_hcd and address 27 [ 8.916305] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 9.100425] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 9.340061] usb 1-5: new high speed USB device using ehci_hcd and address 29 [ 9.408371] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 9.648078] usb 1-5: new high speed USB device using ehci_hcd and address 30 [ 9.716311] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 9.956048] usb 1-5: new high speed USB device using ehci_hcd and address 31 [ 10.024392] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 10.264056] usb 1-5: new high speed USB device using ehci_hcd and address 32 [ 10.332351] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 10.572065] usb 1-5: new high speed USB device using ehci_hcd and address 33 [ 10.640332] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 10.880056] usb 1-5: new high speed USB device using ehci_hcd and address 34 [ 10.948420] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 11.194779] usb 1-5: new high speed USB device using ehci_hcd and address 35 [ 11.260336] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 11.500188] usb 1-5: new high speed USB device using ehci_hcd and address 36 [ 11.568411] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 11.808103] usb 1-5: new high speed USB device using ehci_hcd and address 37 [ 11.900374] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 12.140060] usb 1-5: new high speed USB device using ehci_hcd and address 38 [ 12.208327] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 12.448084] usb 1-5: new high speed USB device using ehci_hcd and address 39 [ 12.516407] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 12.756065] usb 1-5: new high speed USB device using ehci_hcd and address 40 [ 12.824357] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 13.064059] usb 1-5: new high speed USB device using ehci_hcd and address 41 [ 13.132305] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 13.372234] usb 1-5: new high speed USB device using ehci_hcd and address 42 [ 13.440420] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 13.610808] Adding 3421804k swap on /dev/sda6. Priority:-1 extents:1 across:3421804k [ 13.680130] usb 1-5: new high speed USB device using ehci_hcd and address 43 [ 13.733756] udev: starting version 151 [ 13.748406] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 13.988258] usb 1-5: new high speed USB device using ehci_hcd and address 44 [ 14.056400] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 14.296225] usb 1-5: new high speed USB device using ehci_hcd and address 45 [ 14.306908] lp: driver loaded but no devices found [ 14.364430] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 14.420315] parport_pc 00:0a: reported by Plug and Play ACPI [ 14.420445] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 14.508611] lp0: using parport0 (interrupt-driven). [ 14.608244] usb 1-5: new high speed USB device using ehci_hcd and address 46 [ 14.639627] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.676372] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 14.823774] udev: renamed network interface eth0 to eth1 [ 14.858188] udev: renamed network interface eth1_rename to eth0 [ 14.916132] usb 1-5: new high speed USB device using ehci_hcd and address 47 [ 14.964975] Linux agpgart interface v0.103 [ 14.984516] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 15.232223] usb 1-5: new high speed USB device using ehci_hcd and address 48 [ 15.300484] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 15.540124] usb 1-5: new high speed USB device using ehci_hcd and address 49 [ 15.579719] gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x209, speed 852kHz [ 15.608494] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 15.792449] irda_init() [ 15.792501] NET: Registered protocol family 23 [ 15.848154] usb 1-5: new high speed USB device using ehci_hcd and address 50 [ 15.878120] Linux video capture interface: v2.00 [ 15.936460] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 16.097746] type=1505 audit(1301155085.158:2): operation="profile_load" pid=540 name="/sbin/dhclient3" [ 16.098552] type=1505 audit(1301155085.158:3): operation="profile_load" pid=540 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 16.098986] type=1505 audit(1301155085.158:4): operation="profile_load" pid=540 name="/usr/lib/connman/scripts/dhclient-script" [ 16.144994] agpgart: Detected VIA KT400/KT400A/KT600 chipset [ 16.180166] usb 1-5: new high speed USB device using ehci_hcd and address 51 [ 16.210214] ppdev: user-space parallel port driver [ 16.230350] type=1505 audit(1301155085.290:5): operation="profile_replace" pid=560 name="/sbin/dhclient3" [ 16.231129] type=1505 audit(1301155085.290:6): operation="profile_replace" pid=560 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 16.231595] type=1505 audit(1301155085.290:7): operation="profile_replace" pid=560 name="/usr/lib/connman/scripts/dhclient-script" [ 16.252449] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 16.317907] gspca: main v2.7.0 registered [ 16.345584] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 [ 16.377706] vga16fb: initializing [ 16.377818] vga16fb: mapped to 0xc00a0000 [ 16.378582] fb0: VGA16 VGA frame buffer device [ 16.388568] STV06xx: Probing for a stv06xx device [ 16.388581] gspca: probing 046d:08f0 [ 16.388592] STV06xx: Configuring camera [ 16.388596] STV06xx: st6422 sensor detected [ 16.388602] STV06xx: Initializing camera [ 16.459253] psmouse serio1: ID: 10 00 64 [ 16.496550] usb 1-5: new high speed USB device using ehci_hcd and address 52 [ 16.564993] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 16.676375] gspca: probe ok [ 16.676413] STV06xx: Probing for a stv06xx device [ 16.676418] gspca: probing 046d:08f0 [ 16.676440] STV06xx: Probing for a stv06xx device [ 16.676444] gspca: probing 046d:08f0 [ 16.676489] usbcore: registered new interface driver STV06xx [ 16.676495] STV06xx: registered [ 16.749163] type=1505 audit(1301155085.810:8): operation="profile_replace" pid=588 name="/sbin/dhclient3" [ 16.750085] type=1505 audit(1301155085.810:9): operation="profile_replace" pid=588 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 16.750519] type=1505 audit(1301155085.810:10): operation="profile_replace" pid=588 name="/usr/lib/connman/scripts/dhclient-script" [ 16.752455] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 16.868197] kjournald starting. Commit interval 5 seconds [ 16.868623] EXT3 FS on sda2, internal journal [ 16.868639] EXT3-fs: mounted filesystem with ordered data mode. [ 16.913669] nvidia: module license 'NVIDIA' taints kernel. [ 16.913681] Disabling lock debugging due to kernel taint [ 17.476177] usb 1-5: new high speed USB device using ehci_hcd and address 54 [ 17.490357] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 17.544459] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 17.632089] kjournald starting. Commit interval 5 seconds [ 17.632628] EXT3 FS on sda7, internal journal [ 17.632643] EXT3-fs: mounted filesystem with ordered data mode. [ 17.784185] usb 1-5: new high speed USB device using ehci_hcd and address 55 [ 17.852396] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 18.092085] usb 1-5: new high speed USB device using ehci_hcd and address 56 [ 18.160384] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 18.400131] usb 1-5: new high speed USB device using ehci_hcd and address 57 [ 18.468851] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 18.540492] type=1505 audit(1301155087.602:11): operation="profile_load" pid=561 name="/usr/sbin/ntpd" [ 18.652397] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 19.097801] quickcam_messenger: v0.01:Logitech Quickcam Messenger USB [ 19.098348] usbcore: registered new interface driver QCM [ 19.132127] usb 1-5: new high speed USB device using ehci_hcd and address 59 [ 19.201476] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 19.512399] usb 1-5: new high speed USB device using ehci_hcd and address 60 [ 19.625134] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 19.799787] Console: switching to colour frame buffer device 80x30 [ 19.868139] usb 1-5: new high speed USB device using ehci_hcd and address 61 [ 19.899703] usbcore: registered new interface driver snd-usb-audio [ 19.944578] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 20.184107] usb 1-5: new high speed USB device using ehci_hcd and address 62 [ 20.245536] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 [ 20.245546] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 20.245559] alloc irq_desc for 22 on node -1 [ 20.245563] alloc kstat_irqs on node -1 [ 20.245580] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 20.245838] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 20.252566] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 20.254485] alloc irq_desc for 16 on node -1 [ 20.254493] alloc kstat_irqs on node -1 [ 20.254510] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.254621] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 20.257378] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.17 Thu Apr 15 05:28:41 PDT 2010 [ 20.492109] usb 1-5: new high speed USB device using ehci_hcd and address 63 [ 20.560433] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 20.800191] usb 1-5: new high speed USB device using ehci_hcd and address 64 [ 20.868474] hub 1-0:1.0: unable to enumerate USB device on port 5 [ 21.156387] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 21.298230] usb 4-1: not running at top speed; connect to a high speed hub [ 21.323599] usb 4-1: configuration #1 chosen from 1 choice [ 21.443543] Initializing USB Mass Storage driver... [ 21.443843] usbcore: registered new interface driver usb-storage [ 21.448146] USB Mass Storage support registered. [ 21.468127] scsi2 : SCSI emulation for USB Mass Storage devices [ 21.472320] usbcore: registered new interface driver ums-cypress [ 21.480934] usb-storage: device found at 2 [ 21.480942] usb-storage: waiting for device to settle before scanning [ 22.662175] __ratelimit: 6 callbacks suppressed [ 22.662184] type=1505 audit(1301155091.722:14): operation="profile_load" pid=769 name="/usr/share/gdm/guest-session/Xsession" [ 22.699389] type=1505 audit(1301155091.758:15): operation="profile_replace" pid=770 name="/sbin/dhclient3" [ 22.740984] type=1505 audit(1301155091.802:16): operation="profile_replace" pid=770 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 22.741477] type=1505 audit(1301155091.802:17): operation="profile_replace" pid=770 name="/usr/lib/connman/scripts/dhclient-script" [ 22.943413] eth0: link down [ 22.944370] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.962999] type=1505 audit(1301155092.022:18): operation="profile_load" pid=774 name="/usr/bin/evince" [ 23.025151] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 23.049174] type=1505 audit(1301155092.110:19): operation="profile_load" pid=774 name="/usr/bin/evince-previewer" [ 23.088452] type=1505 audit(1301155092.150:20): operation="profile_load" pid=774 name="/usr/bin/evince-thumbnailer" [ 23.221924] type=1505 audit(1301155092.282:21): operation="profile_load" pid=843 name="/usr/lib/cups/backend/cups-pdf" [ 23.222946] type=1505 audit(1301155092.282:22): operation="profile_load" pid=843 name="/usr/sbin/cupsd" [ 23.991089] type=1505 audit(1301155093.050:23): operation="profile_replace" pid=847 name="/usr/sbin/ntpd" [ 24.059212] agpgart-via 0000:00:00.0: AGP 2.0 bridge [ 24.059241] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode [ 24.059317] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode [ 24.537783] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 24.537791] apm: overridden by ACPI. [ 26.484267] usb-storage: device scan complete [ 26.487526] scsi 2:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552B TS03 PQ: 0 ANSI: 0 [ 26.515490] sr2: scsi3-mmc drive: 1x/48x writer cd/rw xa/form2 cdda tray [ 26.515981] sr 2:0:0:0: Attached scsi CD-ROM sr2 [ 26.516327] sr 2:0:0:0: Attached scsi generic sg4 type 5 [ 33.268021] eth1: no IPv6 routers present [ 347.138934] __ratelimit: 3 callbacks suppressed [ 347.138948] scim-bridge[1593]: segfault at 53454741 ip 00d520a7 sp bfcd2f50 error 4 in libscim-1.0.so.8.2.4[cf1000+c5000] [ 2618.428077] usb 1-6: new high speed USB device using ehci_hcd and address 65 [ 2618.496423] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2618.736184] usb 1-6: new high speed USB device using ehci_hcd and address 66 [ 2618.804396] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2618.988599] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2619.177623] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2619.420102] usb 1-6: new high speed USB device using ehci_hcd and address 69 [ 2619.488438] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2619.672652] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2619.912106] usb 1-6: new high speed USB device using ehci_hcd and address 71 [ 2619.980377] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2620.224069] usb 1-6: new high speed USB device using ehci_hcd and address 72 [ 2620.292498] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2620.532112] usb 1-6: new high speed USB device using ehci_hcd and address 73 [ 2620.600423] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2620.784510] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2621.024068] usb 1-6: new high speed USB device using ehci_hcd and address 75 [ 2621.092603] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2621.276362] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2621.516098] usb 1-6: new high speed USB device using ehci_hcd and address 77 [ 2621.584449] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2621.828067] usb 1-6: new high speed USB device using ehci_hcd and address 78 [ 2621.896385] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2622.080387] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2622.264447] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2622.504164] usb 1-6: new high speed USB device using ehci_hcd and address 81 [ 2622.572818] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2622.812107] usb 1-6: new high speed USB device using ehci_hcd and address 82 [ 2622.880509] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2623.069095] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2623.312060] usb 1-6: new high speed USB device using ehci_hcd and address 84 [ 2623.380447] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2623.622866] usb 1-6: new high speed USB device using ehci_hcd and address 85 [ 2623.688409] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2623.930445] usb 1-6: new high speed USB device using ehci_hcd and address 86 [ 2623.996380] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2624.236209] usb 1-6: new high speed USB device using ehci_hcd and address 87 [ 2624.304330] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2624.544193] usb 1-6: new high speed USB device using ehci_hcd and address 88 [ 2624.612416] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2624.856550] usb 1-6: new high speed USB device using ehci_hcd and address 89 [ 2624.925151] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2625.116505] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2625.300603] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2625.484576] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2625.672427] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2625.912109] usb 1-6: new high speed USB device using ehci_hcd and address 94 [ 2625.980371] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2626.220216] usb 1-6: new high speed USB device using ehci_hcd and address 95 [ 2626.290079] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2626.476332] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2626.716114] usb 1-6: new high speed USB device using ehci_hcd and address 97 [ 2626.784456] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2627.024191] usb 1-6: new high speed USB device using ehci_hcd and address 98 [ 2627.093036] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2627.336209] usb 1-6: new high speed USB device using ehci_hcd and address 99 [ 2627.408478] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2627.648074] usb 1-6: new high speed USB device using ehci_hcd and address 100 [ 2627.716403] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2627.956160] usb 1-6: new high speed USB device using ehci_hcd and address 101 [ 2628.024362] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2628.264099] usb 1-6: new high speed USB device using ehci_hcd and address 102 [ 2628.332325] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2628.572091] usb 1-6: new high speed USB device using ehci_hcd and address 103 [ 2628.640507] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2628.880145] usb 1-6: new high speed USB device using ehci_hcd and address 104 [ 2628.949110] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2629.192821] usb 1-6: new high speed USB device using ehci_hcd and address 105 [ 2629.260493] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2629.500211] usb 1-6: new high speed USB device using ehci_hcd and address 106 [ 2629.568441] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2629.812284] usb 1-6: new high speed USB device using ehci_hcd and address 107 [ 2629.881327] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2630.068379] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2630.253294] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2630.496067] usb 1-6: new high speed USB device using ehci_hcd and address 110 [ 2630.564547] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2630.812209] usb 1-6: new high speed USB device using ehci_hcd and address 111 [ 2630.880599] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2631.124117] usb 1-6: new high speed USB device using ehci_hcd and address 112 [ 2631.192464] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2631.436073] usb 1-6: new high speed USB device using ehci_hcd and address 113 [ 2631.504428] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2631.748071] usb 1-6: new high speed USB device using ehci_hcd and address 114 [ 2631.816640] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2632.056129] usb 1-6: new high speed USB device using ehci_hcd and address 115 [ 2632.124349] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2632.364069] usb 1-6: new high speed USB device using ehci_hcd and address 116 [ 2632.432437] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2632.616404] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2632.856163] usb 1-6: new high speed USB device using ehci_hcd and address 118 [ 2632.924376] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2633.108588] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2633.348106] usb 1-6: new high speed USB device using ehci_hcd and address 120 [ 2633.416440] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2633.656120] usb 1-6: new high speed USB device using ehci_hcd and address 121 [ 2633.724401] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2633.964127] usb 1-6: new high speed USB device using ehci_hcd and address 122 [ 2634.032455] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2634.272172] usb 1-6: new high speed USB device using ehci_hcd and address 123 [ 2634.340491] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2634.580080] usb 1-6: new high speed USB device using ehci_hcd and address 124 [ 2634.648565] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2634.892101] usb 1-6: new high speed USB device using ehci_hcd and address 125 [ 2634.960688] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2635.144930] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2635.384447] usb 1-6: new high speed USB device using ehci_hcd and address 127 [ 2635.452369] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2635.692626] usb 1-6: new high speed USB device using ehci_hcd and address 2 [ 2635.761051] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2636.004187] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 2636.072357] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2636.312194] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 2636.380559] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2636.624098] usb 1-6: new high speed USB device using ehci_hcd and address 5 [ 2636.692401] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2636.876522] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2637.116100] usb 1-6: new high speed USB device using ehci_hcd and address 7 [ 2637.184991] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2637.428099] usb 1-6: new high speed USB device using ehci_hcd and address 8 [ 2637.496494] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2637.740735] usb 1-6: new high speed USB device using ehci_hcd and address 9 [ 2637.808389] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2638.052762] usb 1-6: new high speed USB device using ehci_hcd and address 10 [ 2638.121167] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2638.364101] usb 1-6: new high speed USB device using ehci_hcd and address 11 [ 2638.432345] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2638.672135] usb 1-6: new high speed USB device using ehci_hcd and address 12 [ 2638.741240] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2638.984276] usb 1-6: new high speed USB device using ehci_hcd and address 13 [ 2639.052451] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2639.241239] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2639.429490] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2639.672920] usb 1-6: new high speed USB device using ehci_hcd and address 16 [ 2639.740422] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2639.984227] usb 1-6: new high speed USB device using ehci_hcd and address 17 [ 2640.053453] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2640.240445] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2640.485265] usb 1-6: new high speed USB device using ehci_hcd and address 19 [ 2640.552457] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2640.796150] usb 1-6: new high speed USB device using ehci_hcd and address 20 [ 2640.864468] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2641.104247] usb 1-6: new high speed USB device using ehci_hcd and address 21 [ 2641.173548] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2641.417264] usb 1-6: new high speed USB device using ehci_hcd and address 22 [ 2641.485593] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2641.673622] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2641.916526] usb 1-6: new high speed USB device using ehci_hcd and address 24 [ 2641.984744] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2642.224906] usb 1-6: new high speed USB device using ehci_hcd and address 25 [ 2642.292832] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2642.537333] usb 1-6: new high speed USB device using ehci_hcd and address 26 [ 2642.604790] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2642.844524] usb 1-6: new high speed USB device using ehci_hcd and address 27 [ 2642.912376] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2643.097628] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2643.344098] usb 1-6: new high speed USB device using ehci_hcd and address 29 [ 2643.413847] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2643.657366] usb 1-6: new high speed USB device using ehci_hcd and address 30 [ 2643.725969] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2643.968616] usb 1-6: new high speed USB device using ehci_hcd and address 31 [ 2644.037890] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2644.280070] usb 1-6: new high speed USB device using ehci_hcd and address 32 [ 2644.349860] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2644.593689] usb 1-6: new high speed USB device using ehci_hcd and address 33 [ 2644.660411] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2644.848411] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2645.092090] usb 1-6: new high speed USB device using ehci_hcd and address 35 [ 2645.161971] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2645.405557] usb 1-6: new high speed USB device using ehci_hcd and address 36 [ 2645.473905] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2645.716103] usb 1-6: new high speed USB device using ehci_hcd and address 37 [ 2645.784416] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2646.025669] usb 1-6: new high speed USB device using ehci_hcd and address 38 [ 2646.093949] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2646.280445] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2646.521662] usb 1-6: new high speed USB device using ehci_hcd and address 40 [ 2646.590106] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2646.833780] usb 1-6: new high speed USB device using ehci_hcd and address 41 [ 2646.900384] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2647.141774] usb 1-6: new high speed USB device using ehci_hcd and address 42 [ 2647.210069] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2647.452086] usb 1-6: new high speed USB device using ehci_hcd and address 43 [ 2647.521559] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2647.708809] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2647.896528] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2648.136104] usb 1-6: new high speed USB device using ehci_hcd and address 46 [ 2648.204870] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2648.444089] usb 1-6: new high speed USB device using ehci_hcd and address 47 [ 2648.512398] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2648.752202] usb 1-6: new high speed USB device using ehci_hcd and address 48 [ 2648.820431] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2649.008985] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2649.194162] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2649.380560] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2649.570318] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2649.756511] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2649.940616] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2650.181956] usb 1-6: new high speed USB device using ehci_hcd and address 55 [ 2650.248963] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2650.436342] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2650.680547] usb 1-6: new high speed USB device using ehci_hcd and address 57 [ 2650.748445] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2650.932910] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2651.172126] usb 1-6: new high speed USB device using ehci_hcd and address 59 [ 2651.244492] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2651.484094] usb 1-6: new high speed USB device using ehci_hcd and address 60 [ 2651.552442] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2651.794188] usb 1-6: new high speed USB device using ehci_hcd and address 61 [ 2651.864455] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2652.104179] usb 1-6: new high speed USB device using ehci_hcd and address 62 [ 2652.174353] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2652.416068] usb 1-6: new high speed USB device using ehci_hcd and address 63 [ 2652.484554] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2652.724082] usb 1-6: new high speed USB device using ehci_hcd and address 64 [ 2652.792403] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2653.035146] usb 1-6: new high speed USB device using ehci_hcd and address 65 [ 2653.100467] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2653.340256] usb 1-6: new high speed USB device using ehci_hcd and address 66 [ 2653.408398] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2653.592463] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2653.832213] usb 1-6: new high speed USB device using ehci_hcd and address 68 [ 2653.900549] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2654.140159] usb 1-6: new high speed USB device using ehci_hcd and address 69 [ 2654.208505] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2654.448141] usb 1-6: new high speed USB device using ehci_hcd and address 70 [ 2654.516442] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2654.756175] usb 1-6: new high speed USB device using ehci_hcd and address 71 [ 2654.824416] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2655.008497] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2655.192505] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2655.432077] usb 1-6: new high speed USB device using ehci_hcd and address 74 [ 2655.500341] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2655.684438] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2655.924105] usb 1-6: new high speed USB device using ehci_hcd and address 76 [ 2655.992533] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2656.232221] usb 1-6: new high speed USB device using ehci_hcd and address 77 [ 2656.300579] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2656.484557] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2656.724151] usb 1-6: new high speed USB device using ehci_hcd and address 79 [ 2656.792632] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2657.032154] usb 1-6: new high speed USB device using ehci_hcd and address 80 [ 2657.100375] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2657.340120] usb 1-6: new high speed USB device using ehci_hcd and address 81 [ 2657.408463] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2657.648163] usb 1-6: new high speed USB device using ehci_hcd and address 82 [ 2657.716458] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2657.900548] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2658.148200] usb 1-6: new high speed USB device using ehci_hcd and address 84 [ 2658.216408] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2658.460219] usb 1-6: new high speed USB device using ehci_hcd and address 85 [ 2658.528441] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2658.768220] usb 1-6: new high speed USB device using ehci_hcd and address 86 [ 2658.836408] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2659.076083] usb 1-6: new high speed USB device using ehci_hcd and address 87 [ 2659.144522] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2659.384163] usb 1-6: new high speed USB device using ehci_hcd and address 88 [ 2659.452333] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2659.692108] usb 1-6: new high speed USB device using ehci_hcd and address 89 [ 2659.760440] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2660.001073] usb 1-6: new high speed USB device using ehci_hcd and address 90 [ 2660.068474] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2660.308112] usb 1-6: new high speed USB device using ehci_hcd and address 91 [ 2660.380093] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2660.564467] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2660.804073] usb 1-6: new high speed USB device using ehci_hcd and address 93 [ 2660.872409] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2661.112122] usb 1-6: new high speed USB device using ehci_hcd and address 94 [ 2661.180391] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2661.364369] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2661.604190] usb 1-6: new high speed USB device using ehci_hcd and address 96 [ 2661.672308] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2661.912337] usb 1-6: new high speed USB device using ehci_hcd and address 97 [ 2661.980638] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2662.224059] usb 1-6: new high speed USB device using ehci_hcd and address 98 [ 2662.292601] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2662.476359] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2662.716156] usb 1-6: new high speed USB device using ehci_hcd and address 100 [ 2662.784798] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2663.024131] usb 1-6: new high speed USB device using ehci_hcd and address 101 [ 2663.092416] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2663.332169] usb 1-6: new high speed USB device using ehci_hcd and address 102 [ 2663.400347] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2663.584560] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2663.824156] usb 1-6: new high speed USB device using ehci_hcd and address 104 [ 2663.892540] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2664.132067] usb 1-6: new high speed USB device using ehci_hcd and address 105 [ 2664.200626] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2664.440094] usb 1-6: new high speed USB device using ehci_hcd and address 106 [ 2664.508460] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2664.748249] usb 1-6: new high speed USB device using ehci_hcd and address 107 [ 2664.816542] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2665.056071] usb 1-6: new high speed USB device using ehci_hcd and address 108 [ 2665.124515] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2665.364164] usb 1-6: new high speed USB device using ehci_hcd and address 109 [ 2665.432473] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2665.616349] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2665.800451] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2666.040166] usb 1-6: new high speed USB device using ehci_hcd and address 112 [ 2666.108512] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2666.292605] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2666.532069] usb 1-6: new high speed USB device using ehci_hcd and address 114 [ 2666.600672] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2666.840140] usb 1-6: new high speed USB device using ehci_hcd and address 115 [ 2666.908417] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2667.092420] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2667.332158] usb 1-6: new high speed USB device using ehci_hcd and address 117 [ 2667.400356] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2667.584576] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2667.824122] usb 1-6: new high speed USB device using ehci_hcd and address 119 [ 2667.892299] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2668.132133] usb 1-6: new high speed USB device using ehci_hcd and address 120 [ 2668.200385] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2668.440165] usb 1-6: new high speed USB device using ehci_hcd and address 121 [ 2668.508471] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2668.692346] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2668.932214] usb 1-6: new high speed USB device using ehci_hcd and address 123 [ 2669.004456] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2669.244096] usb 1-6: new high speed USB device using ehci_hcd and address 124 [ 2669.312611] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2669.496500] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2669.736144] usb 1-6: new high speed USB device using ehci_hcd and address 126 [ 2669.804465] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2669.988437] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2670.228206] usb 1-6: new high speed USB device using ehci_hcd and address 2 [ 2670.296648] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2670.536234] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 2670.604466] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2670.788463] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2671.028096] usb 1-6: new high speed USB device using ehci_hcd and address 5 [ 2671.096431] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2671.336092] usb 1-6: new high speed USB device using ehci_hcd and address 6 [ 2671.404517] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2671.644235] usb 1-6: new high speed USB device using ehci_hcd and address 7 [ 2671.712328] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2671.896582] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2672.080652] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2672.324069] usb 1-6: new high speed USB device using ehci_hcd and address 10 [ 2672.392497] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2672.632077] usb 1-6: new high speed USB device using ehci_hcd and address 11 [ 2672.700333] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2672.888459] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2673.072432] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2673.256416] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2673.440524] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2673.680142] usb 1-6: new high speed USB device using ehci_hcd and address 16 [ 2673.748669] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2673.988075] usb 1-6: new high speed USB device using ehci_hcd and address 17 [ 2674.056296] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2674.240418] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2674.480197] usb 1-6: new high speed USB device using ehci_hcd and address 19 [ 2674.548476] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2674.788204] usb 1-6: new high speed USB device using ehci_hcd and address 20 [ 2674.856535] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2675.040657] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2675.280156] usb 1-6: new high speed USB device using ehci_hcd and address 22 [ 2675.348412] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2675.588117] usb 1-6: new high speed USB device using ehci_hcd and address 23 [ 2675.656386] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2675.840478] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2676.024543] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2676.264076] usb 1-6: new high speed USB device using ehci_hcd and address 26 [ 2676.332393] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2676.572137] usb 1-6: new high speed USB device using ehci_hcd and address 27 [ 2676.640354] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2676.880156] usb 1-6: new high speed USB device using ehci_hcd and address 28 [ 2676.948479] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2677.188229] usb 1-6: new high speed USB device using ehci_hcd and address 29 [ 2677.256484] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2677.440531] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2677.680138] usb 1-6: new high speed USB device using ehci_hcd and address 31 [ 2677.748494] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2677.932594] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2678.172100] usb 1-6: new high speed USB device using ehci_hcd and address 33 [ 2678.240434] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2678.484140] usb 1-6: new high speed USB device using ehci_hcd and address 34 [ 2678.552385] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2678.792150] usb 1-6: new high speed USB device using ehci_hcd and address 35 [ 2678.860490] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2679.044548] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2679.284144] usb 1-6: new high speed USB device using ehci_hcd and address 37 [ 2679.352524] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2679.536524] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2679.776165] usb 1-6: new high speed USB device using ehci_hcd and address 39 [ 2679.844378] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2680.084149] usb 1-6: new high speed USB device using ehci_hcd and address 40 [ 2680.152305] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2680.392070] usb 1-6: new high speed USB device using ehci_hcd and address 41 [ 2680.460590] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2680.700135] usb 1-6: new high speed USB device using ehci_hcd and address 42 [ 2680.768498] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2681.008099] usb 1-6: new high speed USB device using ehci_hcd and address 43 [ 2681.076441] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2681.316628] usb 1-6: new high speed USB device using ehci_hcd and address 44 [ 2681.384420] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2681.568528] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2681.808701] usb 1-6: new high speed USB device using ehci_hcd and address 46 [ 2681.876562] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2682.060685] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2682.300097] usb 1-6: new high speed USB device using ehci_hcd and address 48 [ 2682.368406] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2682.552409] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2682.792223] usb 1-6: new high speed USB device using ehci_hcd and address 50 [ 2682.860496] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2683.044564] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2683.284122] usb 1-6: new high speed USB device using ehci_hcd and address 52 [ 2683.352658] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2683.592127] usb 1-6: new high speed USB device using ehci_hcd and address 53 [ 2683.660377] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2683.900072] usb 1-6: new high speed USB device using ehci_hcd and address 54 [ 2683.968409] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2684.212166] usb 1-6: new high speed USB device using ehci_hcd and address 55 [ 2684.284423] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2684.524091] usb 1-6: new high speed USB device using ehci_hcd and address 56 [ 2684.592431] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2684.832159] usb 1-6: new high speed USB device using ehci_hcd and address 57 [ 2684.900352] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2685.140067] usb 1-6: new high speed USB device using ehci_hcd and address 58 [ 2685.208437] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2685.448162] usb 1-6: new high speed USB device using ehci_hcd and address 59 [ 2685.516423] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2685.756070] usb 1-6: new high speed USB device using ehci_hcd and address 60 [ 2685.824393] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2686.064217] usb 1-6: new high speed USB device using ehci_hcd and address 61 [ 2686.132329] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2686.316543] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2686.556314] usb 1-6: new high speed USB device using ehci_hcd and address 63 [ 2686.624518] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2686.864077] usb 1-6: new high speed USB device using ehci_hcd and address 64 [ 2686.932359] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2687.116476] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2687.304457] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2687.544215] usb 1-6: new high speed USB device using ehci_hcd and address 67 [ 2687.612430] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2687.796398] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2687.980627] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2688.220126] usb 1-6: new high speed USB device using ehci_hcd and address 70 [ 2688.288561] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2688.528801] usb 1-6: new high speed USB device using ehci_hcd and address 71 [ 2688.596467] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2688.836193] usb 1-6: new high speed USB device using ehci_hcd and address 72 [ 2688.905120] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2689.148184] usb 1-6: new high speed USB device using ehci_hcd and address 73 [ 2689.216418] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2689.400543] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2689.640508] usb 1-6: new high speed USB device using ehci_hcd and address 75 [ 2689.708418] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2689.948543] usb 1-6: new high speed USB device using ehci_hcd and address 76 [ 2690.016376] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2690.200484] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2690.384459] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2690.572437] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2690.756508] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2690.996105] usb 1-6: new high speed USB device using ehci_hcd and address 81 [ 2691.064602] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2691.304119] usb 1-6: new high speed USB device using ehci_hcd and address 82 [ 2691.372444] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2691.556443] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2691.796143] usb 1-6: new high speed USB device using ehci_hcd and address 84 [ 2691.864422] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2692.048474] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2692.288217] usb 1-6: new high speed USB device using ehci_hcd and address 86 [ 2692.356566] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2692.596078] usb 1-6: new high speed USB device using ehci_hcd and address 87 [ 2692.664413] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2692.852537] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2693.092106] usb 1-6: new high speed USB device using ehci_hcd and address 89 [ 2693.160626] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2693.344474] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2693.584222] usb 1-6: new high speed USB device using ehci_hcd and address 91 [ 2693.652511] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2693.892111] usb 1-6: new high speed USB device using ehci_hcd and address 92 [ 2693.960553] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2694.201144] usb 1-6: new high speed USB device using ehci_hcd and address 93 [ 2694.268345] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2694.508126] usb 1-6: new high speed USB device using ehci_hcd and address 94 [ 2694.580455] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2694.764434] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2694.948439] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2695.188170] usb 1-6: new high speed USB device using ehci_hcd and address 97 [ 2695.256353] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2695.496577] usb 1-6: new high speed USB device using ehci_hcd and address 98 [ 2695.564445] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2695.804146] usb 1-6: new high speed USB device using ehci_hcd and address 99 [ 2695.872404] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2696.056404] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2696.296126] usb 1-6: new high speed USB device using ehci_hcd and address 101 [ 2696.364434] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2696.604207] usb 1-6: new high speed USB device using ehci_hcd and address 102 [ 2696.672309] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2696.912100] usb 1-6: new high speed USB device using ehci_hcd and address 103 [ 2696.980540] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2697.220073] usb 1-6: new high speed USB device using ehci_hcd and address 104 [ 2697.288382] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2697.532071] usb 1-6: new high speed USB device using ehci_hcd and address 105 [ 2697.600492] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2697.784328] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2697.968428] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2698.208205] usb 1-6: new high speed USB device using ehci_hcd and address 108 [ 2698.276367] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2698.460582] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2698.704211] usb 1-6: new high speed USB device using ehci_hcd and address 110 [ 2698.772578] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2699.012070] usb 1-6: new high speed USB device using ehci_hcd and address 111 [ 2699.080435] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2699.320104] usb 1-6: new high speed USB device using ehci_hcd and address 112 [ 2699.388358] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2699.628612] usb 1-6: new high speed USB device using ehci_hcd and address 113 [ 2699.696447] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2699.936163] usb 1-6: new high speed USB device using ehci_hcd and address 114 [ 2700.004499] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2700.188628] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2700.428070] usb 1-6: new high speed USB device using ehci_hcd and address 116 [ 2700.496345] hub 1-0:1.0: unable to enumerate USB device on port 6 [ 2700.680340] hub 1-0:1.0: unable to enumerate USB device on port 6