Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-71.el6.x86_64 (mockbuild@x86-007.build.bos.redhat.com) (gcc version 4.4.4 20100726 (Red Hat 4.4.4-13) (GCC) ) #1 SMP Wed Sep 1 01:33:01 EDT 2010 Command line: ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LVM_LV=VolGroup/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us crashkernel=auto rhgb quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000008f000 (usable) BIOS-e820: 000000000008f000 - 0000000000090000 (ACPI NVS) BIOS-e820: 0000000000090000 - 00000000000a0000 (usable) BIOS-e820: 0000000000100000 - 000000007f0cf000 (usable) BIOS-e820: 000000007f0cf000 - 000000007f2bf000 (reserved) BIOS-e820: 000000007f2bf000 - 000000007f3bf000 (ACPI NVS) BIOS-e820: 000000007f3bf000 - 000000007f3ff000 (ACPI data) BIOS-e820: 000000007f3ff000 - 000000007f400000 (usable) BIOS-e820: 00000000e00f8000 - 00000000e00f9000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) EFI v2.10 by INSYDE Corp. ACPI=0x7f3fe000 ACPI 2.0=0x7f3fe014 SMBIOS=0x7f269c18 Kernel-defined memdesc doesn't match the one from EFI! EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000000e000) (0MB) EFI: mem02: type=3, attr=0xf, range=[0x000000000000e000-0x0000000000010000) (0MB) EFI: mem03: type=7, attr=0xf, range=[0x0000000000010000-0x000000000002c000) (0MB) EFI: mem04: type=2, attr=0xf, range=[0x000000000002c000-0x000000000002e000) (0MB) EFI: mem05: type=3, attr=0xf, range=[0x000000000002e000-0x000000000002f000) (0MB) EFI: mem06: type=4, attr=0xf, range=[0x000000000002f000-0x0000000000030000) (0MB) EFI: mem07: type=3, attr=0xf, range=[0x0000000000030000-0x000000000008f000) (0MB) EFI: mem08: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB) EFI: mem09: type=3, attr=0xf, range=[0x0000000000090000-0x00000000000a0000) (0MB) EFI: mem10: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000c00000) (11MB) EFI: mem11: type=3, attr=0xf, range=[0x0000000000c00000-0x0000000001000000) (4MB) EFI: mem12: type=7, attr=0xf, range=[0x0000000001000000-0x000000007a003000) (1936MB) EFI: mem13: type=2, attr=0xf, range=[0x000000007a003000-0x000000007b44e000) (20MB) EFI: mem14: type=4, attr=0xf, range=[0x000000007b44e000-0x000000007b74f000) (3MB) EFI: mem15: type=2, attr=0xf, range=[0x000000007b74f000-0x000000007bb4f000) (4MB) EFI: mem16: type=4, attr=0xf, range=[0x000000007bb4f000-0x000000007bff0000) (4MB) EFI: mem17: type=7, attr=0xf, range=[0x000000007bff0000-0x000000007c05e000) (0MB) EFI: mem18: type=2, attr=0xf, range=[0x000000007c05e000-0x000000007c0c9000) (0MB) EFI: mem19: type=1, attr=0xf, range=[0x000000007c0c9000-0x000000007c120000) (0MB) EFI: mem20: type=2, attr=0xf, range=[0x000000007c120000-0x000000007c177000) (0MB) EFI: mem21: type=1, attr=0xf, range=[0x000000007c177000-0x000000007c1b3000) (0MB) EFI: mem22: type=2, attr=0xf, range=[0x000000007c1b3000-0x000000007c1dc000) (0MB) EFI: mem23: type=4, attr=0xf, range=[0x000000007c1dc000-0x000000007c1ec000) (0MB) EFI: mem24: type=1, attr=0xf, range=[0x000000007c1ec000-0x000000007c20b000) (0MB) EFI: mem25: type=4, attr=0xf, range=[0x000000007c20b000-0x000000007c20c000) (0MB) EFI: mem26: type=1, attr=0xf, range=[0x000000007c20c000-0x000000007c267000) (0MB) EFI: mem27: type=2, attr=0xf, range=[0x000000007c267000-0x000000007c274000) (0MB) EFI: mem28: type=4, attr=0xf, range=[0x000000007c274000-0x000000007c340000) (0MB) EFI: mem29: type=3, attr=0xf, range=[0x000000007c340000-0x000000007c344000) (0MB) EFI: mem30: type=4, attr=0xf, range=[0x000000007c344000-0x000000007cf59000) (12MB) EFI: mem31: type=2, attr=0xf, range=[0x000000007cf59000-0x000000007d099000) (1MB) EFI: mem32: type=1, attr=0xf, range=[0x000000007d099000-0x000000007d0d5000) (0MB) EFI: mem33: type=2, attr=0xf, range=[0x000000007d0d5000-0x000000007d10e000) (0MB) EFI: mem34: type=4, attr=0xf, range=[0x000000007d10e000-0x000000007d114000) (0MB) EFI: mem35: type=2, attr=0xf, range=[0x000000007d114000-0x000000007d117000) (0MB) EFI: mem36: type=4, attr=0xf, range=[0x000000007d117000-0x000000007d11b000) (0MB) EFI: mem37: type=2, attr=0xf, range=[0x000000007d11b000-0x000000007d11c000) (0MB) EFI: mem38: type=4, attr=0xf, range=[0x000000007d11c000-0x000000007d11d000) (0MB) EFI: mem39: type=2, attr=0xf, range=[0x000000007d11d000-0x000000007d11e000) (0MB) EFI: mem40: type=4, attr=0xf, range=[0x000000007d11e000-0x000000007d128000) (0MB) EFI: mem41: type=3, attr=0xf, range=[0x000000007d128000-0x000000007d12d000) (0MB) EFI: mem42: type=2, attr=0xf, range=[0x000000007d12d000-0x000000007d25a000) (1MB) EFI: mem43: type=4, attr=0xf, range=[0x000000007d25a000-0x000000007d278000) (0MB) EFI: mem44: type=2, attr=0xf, range=[0x000000007d278000-0x000000007d279000) (0MB) EFI: mem45: type=4, attr=0xf, range=[0x000000007d279000-0x000000007d282000) (0MB) EFI: mem46: type=2, attr=0xf, range=[0x000000007d282000-0x000000007d287000) (0MB) EFI: mem47: type=4, attr=0xf, range=[0x000000007d287000-0x000000007d294000) (0MB) EFI: mem48: type=2, attr=0xf, range=[0x000000007d294000-0x000000007d295000) (0MB) EFI: mem49: type=4, attr=0xf, range=[0x000000007d295000-0x000000007d2f4000) (0MB) EFI: mem50: type=2, attr=0xf, range=[0x000000007d2f4000-0x000000007d2f6000) (0MB) EFI: mem51: type=4, attr=0xf, range=[0x000000007d2f6000-0x000000007d2f7000) (0MB) EFI: mem52: type=3, attr=0xf, range=[0x000000007d2f7000-0x000000007d2f8000) (0MB) EFI: mem53: type=4, attr=0xf, range=[0x000000007d2f8000-0x000000007d2fb000) (0MB) EFI: mem54: type=3, attr=0xf, range=[0x000000007d2fb000-0x000000007d2fc000) (0MB) EFI: mem55: type=4, attr=0xf, range=[0x000000007d2fc000-0x000000007d303000) (0MB) EFI: mem56: type=3, attr=0xf, range=[0x000000007d303000-0x000000007d311000) (0MB) EFI: mem57: type=4, attr=0xf, range=[0x000000007d311000-0x000000007d316000) (0MB) EFI: mem58: type=3, attr=0xf, range=[0x000000007d316000-0x000000007d31d000) (0MB) EFI: mem59: type=4, attr=0xf, range=[0x000000007d31d000-0x000000007d32c000) (0MB) EFI: mem60: type=3, attr=0xf, range=[0x000000007d32c000-0x000000007d343000) (0MB) EFI: mem61: type=4, attr=0xf, range=[0x000000007d343000-0x000000007d347000) (0MB) EFI: mem62: type=3, attr=0xf, range=[0x000000007d347000-0x000000007d34a000) (0MB) EFI: mem63: type=4, attr=0xf, range=[0x000000007d34a000-0x000000007d34b000) (0MB) EFI: mem64: type=3, attr=0xf, range=[0x000000007d34b000-0x000000007d34c000) (0MB) EFI: mem65: type=4, attr=0xf, range=[0x000000007d34c000-0x000000007d34f000) (0MB) EFI: mem66: type=3, attr=0xf, range=[0x000000007d34f000-0x000000007d350000) (0MB) EFI: mem67: type=4, attr=0xf, range=[0x000000007d350000-0x000000007d354000) (0MB) EFI: mem68: type=3, attr=0xf, range=[0x000000007d354000-0x000000007d355000) (0MB) EFI: mem69: type=4, attr=0xf, range=[0x000000007d355000-0x000000007d356000) (0MB) EFI: mem70: type=3, attr=0xf, range=[0x000000007d356000-0x000000007d35d000) (0MB) EFI: mem71: type=4, attr=0xf, range=[0x000000007d35d000-0x000000007d361000) (0MB) EFI: mem72: type=3, attr=0xf, range=[0x000000007d361000-0x000000007d366000) (0MB) EFI: mem73: type=4, attr=0xf, range=[0x000000007d366000-0x000000007d36c000) (0MB) EFI: mem74: type=3, attr=0xf, range=[0x000000007d36c000-0x000000007d379000) (0MB) EFI: mem75: type=4, attr=0xf, range=[0x000000007d379000-0x000000007d37d000) (0MB) EFI: mem76: type=3, attr=0xf, range=[0x000000007d37d000-0x000000007d381000) (0MB) EFI: mem77: type=4, attr=0xf, range=[0x000000007d381000-0x000000007d384000) (0MB) EFI: mem78: type=3, attr=0xf, range=[0x000000007d384000-0x000000007d38c000) (0MB) EFI: mem79: type=4, attr=0xf, range=[0x000000007d38c000-0x000000007d39b000) (0MB) EFI: mem80: type=3, attr=0xf, range=[0x000000007d39b000-0x000000007d39c000) (0MB) EFI: mem81: type=4, attr=0xf, range=[0x000000007d39c000-0x000000007d39d000) (0MB) EFI: mem82: type=3, attr=0xf, range=[0x000000007d39d000-0x000000007d39f000) (0MB) EFI: mem83: type=4, attr=0xf, range=[0x000000007d39f000-0x000000007d3a2000) (0MB) EFI: mem84: type=3, attr=0xf, range=[0x000000007d3a2000-0x000000007d3a7000) (0MB) EFI: mem85: type=4, attr=0xf, range=[0x000000007d3a7000-0x000000007d3a9000) (0MB) EFI: mem86: type=3, attr=0xf, range=[0x000000007d3a9000-0x000000007d3aa000) (0MB) EFI: mem87: type=4, attr=0xf, range=[0x000000007d3aa000-0x000000007d3b0000) (0MB) EFI: mem88: type=2, attr=0xf, range=[0x000000007d3b0000-0x000000007d3b7000) (0MB) EFI: mem89: type=3, attr=0xf, range=[0x000000007d3b7000-0x000000007d3bf000) (0MB) EFI: mem90: type=4, attr=0xf, range=[0x000000007d3bf000-0x000000007d3c6000) (0MB) EFI: mem91: type=3, attr=0xf, range=[0x000000007d3c6000-0x000000007d3e0000) (0MB) EFI: mem92: type=4, attr=0xf, range=[0x000000007d3e0000-0x000000007d3e6000) (0MB) EFI: mem93: type=3, attr=0xf, range=[0x000000007d3e6000-0x000000007d3ee000) (0MB) EFI: mem94: type=4, attr=0xf, range=[0x000000007d3ee000-0x000000007d3ef000) (0MB) EFI: mem95: type=3, attr=0xf, range=[0x000000007d3ef000-0x000000007d3f3000) (0MB) EFI: mem96: type=4, attr=0xf, range=[0x000000007d3f3000-0x000000007d40f000) (0MB) EFI: mem97: type=3, attr=0xf, range=[0x000000007d40f000-0x000000007d410000) (0MB) EFI: mem98: type=4, attr=0xf, range=[0x000000007d410000-0x000000007d563000) (1MB) EFI: mem99: type=2, attr=0xf, range=[0x000000007d563000-0x000000007d564000) (0MB) EFI: mem100: type=4, attr=0xf, range=[0x000000007d564000-0x000000007d7c4000) (2MB) EFI: mem101: type=3, attr=0xf, range=[0x000000007d7c4000-0x000000007d836000) (0MB) EFI: mem102: type=4, attr=0xf, range=[0x000000007d836000-0x000000007efcf000) (23MB) EFI: mem103: type=3, attr=0xf, range=[0x000000007efcf000-0x000000007f0cf000) (1MB) EFI: mem104: type=5, attr=0x800000000000000f, range=[0x000000007f0cf000-0x000000007f0fc000) (0MB) EFI: mem105: type=5, attr=0x800000000000000f, range=[0x000000007f0fc000-0x000000007f1bf000) (0MB) EFI: mem106: type=6, attr=0x800000000000000f, range=[0x000000007f1bf000-0x000000007f211000) (0MB) EFI: mem107: type=6, attr=0x800000000000000f, range=[0x000000007f211000-0x000000007f23f000) (0MB) EFI: mem108: type=0, attr=0xf, range=[0x000000007f23f000-0x000000007f250000) (0MB) EFI: mem109: type=0, attr=0xf, range=[0x000000007f250000-0x000000007f2a4000) (0MB) EFI: mem110: type=0, attr=0xf, range=[0x000000007f2a4000-0x000000007f2bc000) (0MB) EFI: mem111: type=0, attr=0xf, range=[0x000000007f2bc000-0x000000007f2bf000) (0MB) EFI: mem112: type=10, attr=0xf, range=[0x000000007f2bf000-0x000000007f34a000) (0MB) EFI: mem113: type=10, attr=0xf, range=[0x000000007f34a000-0x000000007f3bf000) (0MB) EFI: mem114: type=9, attr=0xf, range=[0x000000007f3bf000-0x000000007f3e2000) (0MB) EFI: mem115: type=9, attr=0xf, range=[0x000000007f3e2000-0x000000007f3ff000) (0MB) EFI: mem116: type=4, attr=0xf, range=[0x000000007f3ff000-0x000000007f400000) (0MB) EFI: mem117: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB) EFI: mem118: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) EFI: mem119: type=11, attr=0x8000000000000000, range=[0x00000000ffd80000-0x00000000fff51000) (1MB) EFI: mem120: type=11, attr=0x8000000000000000, range=[0x00000000fff51000-0x00000000fff61000) (0MB) EFI: mem121: type=11, attr=0x8000000000000000, range=[0x00000000fff61000-0x0000000100000000) (0MB) DMI 2.7 present. e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x7f400 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0FFC00000 mask FFFC00000 write-protect 1 base 000000000 mask F80000000 write-back 2 base 07F400000 mask FFFC00000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled 8 disabled 9 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 4092MB, range: 4MB, type WP reg 1, base: 0GB, range: 2GB, type WB reg 2, base: 2036MB, range: 4MB, type UC total RAM covered: 2044M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 16M num_reg: 2 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2036MB, range: 4MB, type UC e820 update range: 000000007f400000 - 000000007f800000 (usable) ==> (reserved) initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-000000007f400000 0000000000 - 007f400000 page 2M kernel direct mapping tables up to 7f400000 @ 8000-b000 RAMDISK: 7a003000 - 7ad2bc7f ACPI: RSDP 000000007f3fe014 00024 (v02 INSYDE) ACPI: XSDT 000000007f3fe170 000CC (v01 INSYDE BROMOLOW 00000001 01000013) ACPI: FACP 000000007f3fa000 000F4 (v04 INSYDE BROMOLOW 00000001 ACPI 00040000) ACPI: DSDT 000000007f3f1000 05D7F (v01 INSYDE BROMOLOW 00000000 ACPI 00040000) ACPI: FACS 000000007f35e000 00040 ACPI: TCPA 000000007f3fd000 00032 (v02 INSYDE BROMOLOW 00000000 ACPI 00040000) ACPI: SPMI 000000007f3fc000 00040 (v05 INSYDE BROMOLOW 00000001 ACPI 00040000) ACPI: ASF! 000000007f3fb000 000A5 (v32 INSYDE BROMOLOW 00000001 ACPI 00040000) ACPI: HPET 000000007f3f9000 00038 (v01 INSYDE BROMOLOW 00000001 ACPI 00040000) ACPI: APIC 000000007f3f8000 00092 (v02 INSYDE BROMOLOW 00000001 ACPI 00040000) ACPI: MCFG 000000007f3f7000 0003C (v01 INSYDE BROMOLOW 00000001 ACPI 00040000) ACPI: SLIC 000000007f3f0000 00176 (v01 INSYDE BROMOLOW 00000001 ACPI 00040000) ACPI: WDAT 000000007f3ef000 00224 (v01 INSYDE BROMOLOW 00000001 ACPI 00040000) ACPI: BOOT 000000007f3ed000 00028 (v01 INSYDE BROMOLOW 00000001 ACPI 00040000) ACPI: SSDT 000000007f3ec000 00C39 (v01 INSYDE BROMOLOW 00001000 ACPI 00040000) ACPI: SSDT 000000007f3eb000 006C5 (v01 INSYDE BROMOLOW 00001000 ACPI 00040000) ACPI: ASPT 000000007f3ea000 00034 (v07 INSYDE BROMOLOW 00000001 ACPI 00040000) ACPI: SSDT 000000007f3e9000 00780 (v01 INSYDE BROMOLOW 00003000 ACPI 00040000) ACPI: SSDT 000000007f3e8000 00996 (v01 INSYDE BROMOLOW 00003000 ACPI 00040000) ACPI: SSDT 000000007f3e7000 002CD (v01 Insyde TPMACPI 00001000 INTL 20100121) ACPI: DMAR 000000007f3e6000 000B0 (v01 INTEL SNB 00000001 INTL 00000001) ACPI: HEST 000000007f3e5000 000A8 (v01 INSYDE Bromolow 00000001 ? 00000001) ACPI: ERST 000000007f3e4000 00230 (v01 INSYDE Bromolow 00000001 ? 00000001) ACPI: BERT 000000007f3e3000 00030 (v01 INSYDE Bromolow 00000001 ? 00000001) ACPI: EINJ 000000007f3e2000 00130 (v01 INSYDE Bromolow 00000001 ? 00000001) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-000000007f400000 Bootmem setup node 0 0000000000000000-000000007f400000 NODE_DATA [0000000000009000 - 000000000003cfff] bootmap [000000000003d000 - 000000000004ce7f] pages 10 (8 early reservations) ==> bootmem [0000000000 - 007f400000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001c9eff8] TEXT DATA BSS ==> [0001000000 - 0001c9eff8] #3 [007a003000 - 007ad2bc7f] RAMDISK ==> [007a003000 - 007ad2bc7f] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] #5 [007d3b4000 - 007d3b56e0] EFI memmap ==> [007d3b4000 - 007d3b56e0] #6 [0001c9f000 - 0001c9f388] BRK ==> [0001c9f000 - 0001c9f388] #7 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] found SMP MP-table at [ffff8800000fe1b0] fe1b0 [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002200000-ffff880003dfffff] on node 0 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000001 -> 0x0000008f 0: 0x00000090 -> 0x000000a0 0: 0x00000100 -> 0x0007f0cf 0: 0x0007f3ff -> 0x0007f400 On node 0 totalpages: 520302 DMA zone: 56 pages used for memmap DMA zone: 102 pages reserved DMA zone: 3840 pages, LIFO batch:0 DMA32 zone: 7070 pages used for memmap DMA32 zone: 509234 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000008f000 - 0000000000090000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 000000007f0cf000 - 000000007f2bf000 PM: Registered nosave memory: 000000007f2bf000 - 000000007f3bf000 PM: Registered nosave memory: 000000007f3bf000 - 000000007f3ff000 Allocating PCI resources starting at 7f400000 (gap: 7f400000:60cf8000) Booting paravirtualized kernel on bare hardware NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 31 pages/cpu @ffff880001e00000 s95064 r8192 d23720 u262144 pcpu-alloc: s95064 r8192 d23720 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Node order, mobility grouping on. Total pages: 513074 Policy zone: DMA32 Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rd_LVM_LV=VolGroup/lv_root rd_LVM_LV=VolGroup/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet PID hash table entries: 4096 (order: 3, 32768 bytes) xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 Checking aperture... No AGP bridge found Queued invalidation will be enabled to support x2apic and Intr-remapping. AMD-Vi disabled by default: pass amd_iommu=on to enable Memory: 2024620k/2084864k available (4935k kernel code, 3656k absent, 56588k reserved, 3927k data, 1220k init) Hierarchical RCU implementation. NR_IRQS:33024 nr_irqs:472 Extended CMOS year: 2000 Console: colour dummy device 80x25 console [tty0] enabled allocated 20971520 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered alloc irq_desc for 24 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 25 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 26 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 27 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 28 on node 0 alloc kstat_irqs on node 0 HPET: 8 timers in total, 5 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 3099.984 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 6199.96 BogoMIPS (lpj=3099984) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls Initializing cgroup subsys blkio CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f ACPI: Core revision 20090903 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 20276 entries in 80 pages DMAR: Host address width 36 DMAR: DRHD base: 0x000000fed91000 flags: 0x1 IOMMU fed91000: ver 1:0 cap c9008020660262 ecap f010da DMAR: RMRR base: 0x0000007f26c000 end: 0x0000007f26ffff DMAR: No ATSR found IOAPIC id 0 under DRHD base 0xfed91000 HPET id 0 under DRHD base 0xfed91000 HPET id 0 under DRHD base 0xfed91000 HPET id 0 under DRHD base 0xfed91000 HPET id 0 under DRHD base 0xfed91000 HPET id 0 under DRHD base 0xfed91000 HPET id 0 under DRHD base 0xfed91000 HPET id 0 under DRHD base 0xfed91000 HPET id 0 under DRHD base 0xfed91000 Enabled Interrupt-remapping Enabling x2apic Enabled x2apic Setting APIC routing to cluster x2apic alloc irq_desc for 29 on node 0 alloc kstat_irqs on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 alloc irq_2_iommu on node 0 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Genuine Intel(R) CPU 0 @ 3.10GHz stepping 05 Booting Node 0, Processors #1 CPU1: Thermal monitoring handled by SMI #2 CPU2: Thermal monitoring handled by SMI #3 CPU3: Thermal monitoring handled by SMI #4 CPU4: Thermal monitoring handled by SMI #5 CPU5: Thermal monitoring handled by SMI #6 CPU6: Thermal monitoring handled by SMI #7 Ok. CPU7: Thermal monitoring handled by SMI Brought up 8 CPUs Total of 8 processors activated (49593.64 BogoMIPS). Testing NMI watchdog ... OK. sizeof(vma)=200 bytes sizeof(page)=56 bytes sizeof(inode)=592 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=800 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2600 bytes devtmpfs: initialized regulator: core version 0.5 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT \_SB_:_OSC invalid UUID _OSC request data:1 7 ACPI: Executed 1 blocks of module-level executable AML code ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI: Power Resource [FN00] (off) ACPI: Power Resource [FN01] (off) ACPI: Power Resource [FN02] (off) ACPI: Power Resource [FN03] (off) ACPI: Power Resource [FN04] (off) ACPI: ACPI Dock Station Driver: 1 docks/bays found _OSC invalid UUID ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:19.0: reg 10 32bit mmio: [0x81a00000-0x81a1ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0x81a26000-0x81a26fff] pci 0000:00:19.0: reg 18 io port: [0x3020-0x303f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 10 32bit mmio: [0x81a25000-0x81a253ff] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 10 32bit mmio: [0x81a24000-0x81a243ff] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x3098-0x309f] pci 0000:00:1f.2: reg 14 io port: [0x30ac-0x30af] pci 0000:00:1f.2: reg 18 io port: [0x3090-0x3097] pci 0000:00:1f.2: reg 1c io port: [0x30a8-0x30ab] pci 0000:00:1f.2: reg 20 io port: [0x3070-0x307f] pci 0000:00:1f.2: reg 24 io port: [0x3060-0x306f] pci 0000:00:1f.3: reg 10 64bit mmio: [0x81a22000-0x81a220ff] pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f] pci 0000:00:1f.5: reg 10 io port: [0x3088-0x308f] pci 0000:00:1f.5: reg 14 io port: [0x30a4-0x30a7] pci 0000:00:1f.5: reg 18 io port: [0x3080-0x3087] pci 0000:00:1f.5: reg 1c io port: [0x30a0-0x30a3] pci 0000:00:1f.5: reg 20 io port: [0x3050-0x305f] pci 0000:00:1f.5: reg 24 io port: [0x3040-0x304f] pci 0000:02:00.0: reg 10 32bit mmio: [0x80000000-0x80ffffff] pci 0000:02:00.0: reg 14 32bit mmio: [0x81800000-0x81803fff] pci 0000:02:00.0: reg 18 32bit mmio: [0x81000000-0x817fffff] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xffff0000-0xffffffff] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.4: bridge 32bit mmio: [0x80000000-0x818fffff] pci 0000:03:00.0: reg 10 32bit mmio: [0x81900000-0x8191ffff] pci 0000:03:00.0: reg 18 io port: [0x2000-0x201f] pci 0000:03:00.0: reg 1c 32bit mmio: [0x81920000-0x81923fff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.5: bridge 32bit mmio: [0x81900000-0x819fffff] pci 0000:00:1e.0: transparent bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] _OSC invalid UUID _OSC invalid UUID Unable to assume PCIe control: Disabling ASPM ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter alloc irq_2_iommu on node 0 hpet: hpet2 irq 24 for MSI alloc irq_2_iommu on node 0 hpet: hpet3 irq 25 for MSI alloc irq_2_iommu on node 0 hpet: hpet4 irq 26 for MSI alloc irq_2_iommu on node 0 hpet: hpet5 irq 27 for MSI alloc irq_2_iommu on node 0 hpet: hpet6 irq 28 for MSI Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 11 devices ACPI: ACPI bus type pnp unregistered system 00:06: ioport range 0x680-0x69f has been reserved system 00:06: ioport range 0x1000-0x100f has been reserved system 00:06: ioport range 0x1010-0x1013 has been reserved system 00:06: ioport range 0xffff-0xffff has been reserved system 00:06: ioport range 0x400-0x453 has been reserved system 00:06: ioport range 0x458-0x47f has been reserved system 00:06: ioport range 0x500-0x57f has been reserved system 00:06: ioport range 0x164e-0x164f has been reserved system 00:08: ioport range 0x454-0x457 has been reserved system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:0a: iomem range 0xfed10000-0xfed17fff has been reserved system 00:0a: iomem range 0xfed18000-0xfed18fff has been reserved system 00:0a: iomem range 0xfed19000-0xfed19fff has been reserved system 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:0a: iomem range 0xfed90000-0xfed93fff has been reserved system 00:0a: iomem range 0xff000000-0xffffffff could not be reserved system 00:0a: iomem range 0xfee00000-0xfeefffff has been reserved system 00:0a: iomem range 0x81b00000-0x81b00fff has been reserved pci 0000:02:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff] pci 0000:00:1c.0: PCI bridge to [bus 01-01] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: bridge window [io disabled] pci 0000:00:1c.0: bridge window [mem disabled] pci 0000:00:1c.0: bridge window [mem pref disabled] pci 0000:00:1c.4: PCI bridge to [bus 02-02] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.4: bridge window [io disabled] pci 0000:00:1c.4: bridge window [0x80000000-0x818fffff] pci 0000:00:1c.4: bridge window [0x81c00000-0x81cfffff] pci 0000:00:1c.5: PCI bridge to [bus 03-03] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.5: bridge window [0x2000-0x2fff] pci 0000:00:1c.5: bridge window [0x81900000-0x819fffff] pci 0000:00:1c.5: bridge window [mem pref disabled] pci 0000:00:1e.0: PCI bridge to [bus 04-04] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] alloc irq_desc for 17 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 alloc irq_desc for 16 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:02: resource 1 mem: [0x80000000-0x818fffff] pci_bus 0000:02: resource 2 pref mem [0x81c00000-0x81cfffff] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff] pci_bus 0000:03: resource 1 mem: [0x81900000-0x819fffff] pci_bus 0000:04: resource 3 io: [0x00-0xffff] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:02:00.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 13475k freed Simple Boot Flag at 0x44 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1262513692.025:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 3980 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) ksign: Installing public key data Loading keyring - Added public key 9D480283FFC05098 - key was been created 20803899 seconds in future - User ID: Red Hat, Inc. (Kernel Module GPG key) - Added public key D4A26C9CCD09BEDA - key was been created 6222400 seconds in future - User ID: Red Hat Enterprise Linux Driver Update Program Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) alloc irq_desc for 30 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 31 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 pcieport 0000:00:1c.4: irq 31 for MSI/MSI-X pcieport 0000:00:1c.4: setting latency timer to 64 alloc irq_desc for 32 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 pcieport 0000:00:1c.5: irq 32 for MSI/MSI-X pcieport 0000:00:1c.5: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp: Slot [1] registered pci-stub: invalid id string "" efifb: probing for efifb efifb: framebuffer at 0x80000000, mapped to 0xffffc90010980000, using 6144k, total 8128k efifb: mode is 1024x768x32, linelength=4096, pages=1 efifb: scrolling: redraw efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Console: switching to colour frame buffer device 128x48 fb0: EFI VGA frame buffer device input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] fan PNP0C0B:00: registered as cooling_device0 ACPI: Fan [FAN0] (off) fan PNP0C0B:01: registered as cooling_device1 ACPI: Fan [FAN1] (off) fan PNP0C0B:02: registered as cooling_device2 ACPI: Fan [FAN2] (off) fan PNP0C0B:03: registered as cooling_device3 ACPI: Fan [FAN3] (off) fan PNP0C0B:04: registered as cooling_device4 ACPI: Fan [FAN4] (off) processor LNXCPU:00: registered as cooling_device5 ACPI: SSDT 000000007f268a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121) processor LNXCPU:01: registered as cooling_device6 processor LNXCPU:02: registered as cooling_device7 processor LNXCPU:03: registered as cooling_device8 processor LNXCPU:04: registered as cooling_device9 processor LNXCPU:05: registered as cooling_device10 processor LNXCPU:06: registered as cooling_device11 processor LNXCPU:07: registered as cooling_device12 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ01] (30 C) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 crash memory driver: version 1.0 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input1 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: irq 16, io mem 0x81a25000 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-71.el6.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected alloc irq_desc for 23 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.0: debug port 2 ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: irq 23, io mem 0x81a24000 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-71.el6.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver PNP: No PS/2 controller found. Probing ports directly. mice: PS/2 mouse device common for all mice rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 IMA: No TPM chip found, activating TPM-bypass! rtc_cmos 00:07: setting system clock to 2010-01-03 10:14:53 UTC (1262513693) Initalizing network drop monitor service Freeing unused kernel memory: 1220k freed Write protecting the kernel read-only data: 7176k dracut: dracut-004-32.el6 dracut: rd_NO_LUKS: removing cryptoluks activation device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com udev: starting version 147 usb 1-1: new high speed USB device using ehci_hcd and address 2 dracut: Starting plymouth daemon usb 1-1: New USB device found, idVendor=8087, idProduct=0024 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected usb 2-1: new high speed USB device using ehci_hcd and address 2 usb 2-1: New USB device found, idVendor=8087, idProduct=0024 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 2-1: configuration #1 chosen from 1 choice hub 2-1:1.0: USB hub found hub 2-1:1.0: 6 ports detected usb 1-1.3: new high speed USB device using ehci_hcd and address 3 dracut: rd_NO_DM: removing DM RAID activation dracut: rd_NO_MD: removing MD RAID activation usb 1-1.3: New USB device found, idVendor=3538, idProduct=0901 usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1.3: Product: PQI USB Flash Drive usb 1-1.3: Manufacturer: PQI usb 1-1.3: SerialNumber: 02AB0000000000000000000000000341 usb 1-1.3: configuration #1 chosen from 1 choice ata_piix 0000:00:1f.2: version 2.13 alloc irq_desc for 19 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] usb 1-1.4: new high speed USB device using ehci_hcd and address 4 usb 1-1.4: New USB device found, idVendor=0409, idProduct=005a usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1.4: configuration #1 chosen from 1 choice hub 1-1.4:1.0: USB hub found hub 1-1.4:1.0: 4 ports detected ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x3098 ctl 0x30ac bmdma 0x3070 irq 19 ata2: SATA max UDMA/133 cmd 0x3090 ctl 0x30a8 bmdma 0x3078 irq 19 alloc irq_desc for 21 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 ata_piix 0000:00:1f.5: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] usb 2-1.1: new full speed USB device using ehci_hcd and address 3 usb 2-1.1: New USB device found, idVendor=046b, idProduct=ff10 usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1.1: Product: Virtual Keyboard and Mouse usb 2-1.1: Manufacturer: American Megatrends Inc. usb 2-1.1: SerialNumber: serial usb 2-1.1: configuration #1 chosen from 1 choice input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input2 generic-usb 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-1.1/input0 input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input3 generic-usb 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-1.1/input1 ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x3088 ctl 0x30a4 bmdma 0x3050 irq 21 ata4: SATA max UDMA/133 cmd 0x3080 ctl 0x30a0 bmdma 0x3058 irq 21 usb 1-1.4.2: new low speed USB device using ehci_hcd and address 5 usb 1-1.4.2: New USB device found, idVendor=046d, idProduct=c315 usb 1-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.4.2: Product: Logitech USB Keyboard usb 1-1.4.2: Manufacturer: Logitech usb 1-1.4.2: configuration #1 chosen from 1 choice input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.2/1-1.4.2:1.0/input/input4 generic-usb 0003:046D:C315.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:1a.0-1.4.2/input0 usb 1-1.4.4: new low speed USB device using ehci_hcd and address 6 ata3: SATA link down (SStatus 0 SControl 300) usb 1-1.4.4: New USB device found, idVendor=1b1a, idProduct=0000 usb 1-1.4.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-1.4.4: Product: USB Mouse usb 1-1.4.4: configuration #1 chosen from 1 choice input: USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4.4/1-1.4.4:1.0/input/input5 generic-usb 0003:1B1A:0000.0004: input,hidraw3: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1a.0-1.4.4/input0 ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.01: SATA link down (SStatus 0 SControl 300) ata2.01: link offline, clearing class 3 to NONE ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100 ata2.00: configured for UDMA/100 ata4: failed to resume link (SControl 0) ata4: SATA link down (SStatus 4 SControl 0) ata1.01: failed to resume link (SControl 0) ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.01: SATA link down (SStatus 4 SControl 0) ata1.00: ATA-8: WDC WD5000AAKS-00A7B2, 01.03B01, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 01.0 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL02 PQ: 0 ANSI: 5 Initializing USB Mass Storage driver... scsi4 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 dracut: Scanning devices sda4 for LVM logical volumes VolGroup/lv_root VolGroup/lv_swap dracut: inactive '/dev/VolGroup/lv_root' [50.00 GiB] inherit dracut: inactive '/dev/VolGroup/lv_home' [410.98 GiB] inherit dracut: inactive '/dev/VolGroup/lv_swap' [3.91 GiB] inherit EXT4-fs (dm-0): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root dracut: Loading SELinux policy type=1404 audit(1262513697.826:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 2048 avtab hash slots, 199690 rules. SELinux: 2048 avtab hash slots, 199690 rules. SELinux: 9 users, 13 roles, 3323 types, 168 bools, 1 sens, 1024 cats SELinux: 77 classes, 199690 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1262513698.251:3): policy loaded auid=4294967295 ses=4294967295 dracut: dracut: Switching root readahead: starting udev: starting version 147 e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2 e1000e: Copyright (c) 1999 - 2009 Intel Corporation. alloc irq_desc for 20 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 33 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 e1000e 0000:00:19.0: irq 33 for MSI/MSI-X usb-storage: device scan complete scsi 4:0:0:0: Direct-Access Generic USB Flash Disk 8.07 PQ: 0 ANSI: 2 sd 4:0:0:0: [sdb] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 4:0:0:0: [sdb] Assuming drive cache: write through sd 4:0:0:0: [sdb] Assuming drive cache: write through sdb: 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 88:88:88:88:87:88 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: ffffff-0ff e1000e 0000:03:00.0: Disabling L1 ASPM e1000e 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 e1000e 0000:03:00.0: setting latency timer to 64 alloc irq_desc for 34 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 e1000e 0000:03:00.0: irq 34 for MSI/MSI-X alloc irq_desc for 35 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 e1000e 0000:03:00.0: irq 35 for MSI/MSI-X alloc irq_desc for 36 on node -1 alloc kstat_irqs on node -1 alloc irq_2_iommu on node -1 e1000e 0000:03:00.0: irq 36 for MSI/MSI-X sdb1 sd 4:0:0:0: [sdb] Assuming drive cache: write through sd 4:0:0:0: [sdb] Attached SCSI removable disk 0000:03:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:04:23:e8:0a:85 0000:03:00.0: eth1: Intel(R) PRO/1000 Network Connection 0000:03:00.0: eth1: MAC: 3, PHY: 8, PBA No: ffffff-0ff iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ACPI: I/O resource 0000:00:1f.3 [0x3000-0x301f] conflicts with ACPI region SMBI [0x3000-0x300f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 sd 4:0:0:0: Attached scsi generic sg2 type 0 EXT4-fs (sda3): mounted filesystem with ordered data mode SELinux: initialized (dev sda3, type ext4), uses xattr SELinux: initialized (dev sda2, type vfat), uses genfs_contexts EXT4-fs (dm-2): mounted filesystem with ordered data mode SELinux: initialized (dev dm-2, type ext4), uses xattr Adding 4095992k swap on /dev/mapper/VolGroup-lv_swap. Priority:-1 extents:1 across:4095992k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts microcode: CPU0 sig=0x206a5, pf=0x2, revision=0x7 platform microcode: firmware: requesting intel-ucode/06-2a-05 microcode: CPU1 sig=0x206a5, pf=0x2, revision=0x7 platform microcode: firmware: requesting intel-ucode/06-2a-05 microcode: CPU2 sig=0x206a5, pf=0x2, revision=0x7 platform microcode: firmware: requesting intel-ucode/06-2a-05 microcode: CPU3 sig=0x206a5, pf=0x2, revision=0x7 platform microcode: firmware: requesting intel-ucode/06-2a-05 microcode: CPU4 sig=0x206a5, pf=0x2, revision=0x7 platform microcode: firmware: requesting intel-ucode/06-2a-05 microcode: CPU5 sig=0x206a5, pf=0x2, revision=0x7 platform microcode: firmware: requesting intel-ucode/06-2a-05 microcode: CPU6 sig=0x206a5, pf=0x2, revision=0x7 platform microcode: firmware: requesting intel-ucode/06-2a-05 microcode: CPU7 sig=0x206a5, pf=0x2, revision=0x7 platform microcode: firmware: requesting intel-ucode/06-2a-05 Microcode Update Driver: v2.00 , Peter Oruba Microcode Update Driver: v2.00 removed. SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team e1000e 0000:00:19.0: irq 33 for MSI/MSI-X e1000e 0000:00:19.0: irq 33 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready ADDRCONF(NETDEV_UP): eth1: link is not ready RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts Bridge firewalling registered virbr0: starting userspace STP failed, starting kernel STP Ebtables v2.0 registered SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs lo: Disabled Privacy Extensions SELinux: initialized (dev proc, type proc), uses genfs_contexts fuse init (API version 7.13) SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts