[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-7-generic (buildd@yellow) (gcc version 4.6.2 (Ubuntu/Linaro 4.6.2-9ubuntu1) ) #13-Ubuntu SMP Sat Dec 24 18:06:57 UTC 2011 (Ubuntu 3.2.0-7.13-generic 3.2.0-rc7) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-7-generic root=/dev/mapper/srv--bonding-root ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe54000 (usable) [ 0.000000] BIOS-e820: 00000000cfe54000 - 00000000cfe5c000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cfe5c000 - 00000000cfe5d000 (usable) [ 0.000000] BIOS-e820: 00000000cfe5d000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000012ffff000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] DMI: HP ProLiant DL380 G5, BIOS P56 07/10/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x12ffff max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xcfe5d max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f4f80] f4f80 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cfe5d000 [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cfe5d000 page 4k [ 0.000000] kernel direct mapping tables up to cfe5d000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000012ffff000 [ 0.000000] 0100000000 - 012fe00000 page 2M [ 0.000000] 012fe00000 - 012ffff000 page 4k [ 0.000000] kernel direct mapping tables up to 12ffff000 @ cfe4d000-cfe54000 [ 0.000000] RAMDISK: 3640e000 - 371ff000 [ 0.000000] ACPI: RSDP 00000000000f4f00 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 00000000cfe547c0 0007C (v01 HP ProLiant 00000002 \xffffffd2? 0000162E) [ 0.000000] ACPI: FACP 00000000cfe54840 000F4 (v03 HP ProLiant 00000002 \xffffffd2? 0000162E) [ 0.000000] ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110623/tbfadt-610) [ 0.000000] ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20110623/tbfadt-610) [ 0.000000] ACPI: DSDT 00000000cfe54940 022FD (v01 HP DSDT 00000001 INTL 20061109) [ 0.000000] ACPI: FACS 00000000cfe54100 00040 [ 0.000000] ACPI: SPCR 00000000cfe54140 00050 (v01 HP SPCRRBSU 00000001 \xffffffd2? 0000162E) [ 0.000000] ACPI: MCFG 00000000cfe541c0 0003C (v01 HP ProLiant 00000001 00000000) [ 0.000000] ACPI: HPET 00000000cfe54200 00038 (v01 HP ProLiant 00000002 \xffffffd2? 0000162E) [ 0.000000] ACPI: SPMI 00000000cfe54240 00040 (v05 HP ProLiant 00000001 \xffffffd2? 0000162E) [ 0.000000] ACPI: ERST 00000000cfe54280 001D0 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E) [ 0.000000] ACPI: APIC 00000000cfe54480 0009E (v01 HP ProLiant 00000002 00000000) [ 0.000000] ACPI: FFFF 00000000cfe54540 00176 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E) [ 0.000000] ACPI: BERT 00000000cfe546c0 00030 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E) [ 0.000000] ACPI: HEST 00000000cfe54700 000BC (v01 HP ProLiant 00000001 \xffffffd2? 0000162E) [ 0.000000] ACPI: SSDT 00000000cfe59000 00C85 (v01 HP SSDTP 00000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000012ffff000 [ 0.000000] Initmem setup node 0 0000000000000000-000000012ffff000 [ 0.000000] NODE_DATA [000000012fffa000 - 000000012fffefff] [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0012ffff [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cfe54 [ 0.000000] 0: 0x000cfe5c -> 0x000cfe5d [ 0.000000] 0: 0x00100000 -> 0x0012ffff [ 0.000000] On node 0 totalpages: 1048035 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3914 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 831125 pages, LIFO batch:31 [ 0.000000] Normal zone: 3072 pages used for memmap [ 0.000000] Normal zone: 193535 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x908 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec82000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec82000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 64 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cfe54000 - 00000000cfe5c000 [ 0.000000] PM: Registered nosave memory: 00000000cfe5d000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 [ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:10000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83008 r8192 d23488 u262144 [ 0.000000] pcpu-alloc: s83008 r8192 d23488 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028574 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-7-generic root=/dev/mapper/srv--bonding-root ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 4029560k/4980732k available (6525k kernel code, 788592k absent, 162580k reserved, 6661k data, 916k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:1152 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2333.063 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.12 BogoMIPS (lpj=9332252) [ 0.004010] pid_max: default: 32768 minimum: 301 [ 0.004040] Security Framework initialized [ 0.004059] AppArmor: AppArmor initialized [ 0.004061] Yama: becoming mindful. [ 0.004499] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.009274] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010298] Mount-cache hash table entries: 256 [ 0.010489] Initializing cgroup subsys cpuacct [ 0.010497] Initializing cgroup subsys memory [ 0.010508] Initializing cgroup subsys devices [ 0.010510] Initializing cgroup subsys freezer [ 0.010512] Initializing cgroup subsys net_cls [ 0.010514] Initializing cgroup subsys blkio [ 0.010524] Initializing cgroup subsys perf_event [ 0.010561] CPU: Physical Processor ID: 0 [ 0.010562] CPU: Processor Core ID: 0 [ 0.010565] mce: CPU supports 6 MCE banks [ 0.010573] CPU0: Thermal monitoring enabled (TM2) [ 0.010577] using mwait in idle threads. [ 0.013153] ACPI: Core revision 20110623 [ 0.015293] ftrace: allocating 26837 entries in 106 pages [ 0.016512] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.059061] CPU0: Intel(R) Xeon(R) CPU E5345 @ 2.33GHz stepping 07 [ 0.060003] Performance Events: PEBS fmt0-, Core2 events, Broken BIOS detected, complain to your hardware vendor. [ 0.060003] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 186 is 43003c) [ 0.060003] Intel PMU driver. [ 0.060003] PEBS disabled due to CPU errata. [ 0.060003] ... version: 2 [ 0.060003] ... bit width: 40 [ 0.060003] ... generic registers: 2 [ 0.060003] ... value mask: 000000ffffffffff [ 0.060003] ... max period: 000000007fffffff [ 0.060003] ... fixed-purpose events: 3 [ 0.060003] ... event mask: 0000000700000003 [ 0.060003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.060003] Booting Node 0, Processors #1 [ 0.060003] smpboot cpu 1: start_ip = 9a000 [ 0.148033] NMI watchdog enabled, takes one hw-pmu counter. [ 0.148146] #2 [ 0.148148] smpboot cpu 2: start_ip = 9a000 [ 0.240038] NMI watchdog enabled, takes one hw-pmu counter. [ 0.240141] #3 [ 0.240143] smpboot cpu 3: start_ip = 9a000 [ 0.336045] NMI watchdog enabled, takes one hw-pmu counter. [ 0.336143] #4 [ 0.336145] smpboot cpu 4: start_ip = 9a000 [ 0.428062] NMI watchdog enabled, takes one hw-pmu counter. [ 0.428223] #5 [ 0.428225] smpboot cpu 5: start_ip = 9a000 [ 0.524056] NMI watchdog enabled, takes one hw-pmu counter. [ 0.524159] #6 [ 0.524161] smpboot cpu 6: start_ip = 9a000 [ 0.616061] NMI watchdog enabled, takes one hw-pmu counter. [ 0.616158] #7 Ok. [ 0.616160] smpboot cpu 7: start_ip = 9a000 [ 0.708078] NMI watchdog enabled, takes one hw-pmu counter. [ 0.708105] Brought up 8 CPUs [ 0.708108] Total of 8 processors activated (37333.11 BogoMIPS). [ 0.712389] devtmpfs: initialized [ 0.713114] EVM: security.selinux [ 0.713116] EVM: security.SMACK64 [ 0.713117] EVM: security.capability [ 0.713470] print_constraints: dummy: [ 0.713501] RTC time: 20:35:05, date: 01/11/12 [ 0.713543] NET: Registered protocol family 16 [ 0.713587] Trying to unpack rootfs image as initramfs... [ 0.713693] ACPI: bus type pci registered [ 0.713759] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.713762] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.757871] PCI: Using configuration type 1 for base access [ 0.757879] PCI: HP ProLiant DL380 detected, enabling pci=bfsort. [ 0.759222] bio: create slab at 0 [ 0.759365] ACPI: Added _OSI(Module Device) [ 0.759365] ACPI: Added _OSI(Processor Device) [ 0.759365] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.759365] ACPI: Added _OSI(Processor Aggregator Device) [ 0.760271] ACPI: EC: Look up EC in DSDT [ 0.760402] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20110623/dsopcode-236) [ 0.760408] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff880128a366b8), AE_AML_BUFFER_LIMIT (20110623/psparse-536) [ 0.761906] ACPI: SSDT 00000000cfe5f800 000AD (v01 HP CPU0CST 00000001 INTL 20061109) [ 0.762080] ACPI: Dynamic OEM Table Load: [ 0.762083] ACPI: SSDT (null) 000AD (v01 HP CPU0CST 00000001 INTL 20061109) [ 0.772292] ACPI: SSDT 00000000cfe5f900 000AD (v01 HP CPU1CST 00000001 INTL 20061109) [ 0.772471] ACPI: Dynamic OEM Table Load: [ 0.772475] ACPI: SSDT (null) 000AD (v01 HP CPU1CST 00000001 INTL 20061109) [ 0.808320] ACPI: SSDT 00000000cfe5fa00 000AD (v01 HP CPU2CST 00000001 INTL 20061109) [ 0.808501] ACPI: Dynamic OEM Table Load: [ 0.808504] ACPI: SSDT (null) 000AD (v01 HP CPU2CST 00000001 INTL 20061109) [ 0.832323] ACPI: SSDT 00000000cfe5fb00 000AD (v01 HP CPU3CST 00000001 INTL 20061109) [ 0.832502] ACPI: Dynamic OEM Table Load: [ 0.832505] ACPI: SSDT (null) 000AD (v01 HP CPU3CST 00000001 INTL 20061109) [ 0.864320] ACPI: SSDT 00000000cfe5fc00 000AD (v01 HP CPU4CST 00000001 INTL 20061109) [ 0.864532] ACPI: Dynamic OEM Table Load: [ 0.864536] ACPI: SSDT (null) 000AD (v01 HP CPU4CST 00000001 INTL 20061109) [ 0.896322] ACPI: SSDT 00000000cfe5fd00 000AD (v01 HP CPU5CST 00000001 INTL 20061109) [ 0.896534] ACPI: Dynamic OEM Table Load: [ 0.896537] ACPI: SSDT (null) 000AD (v01 HP CPU5CST 00000001 INTL 20061109) [ 0.928317] ACPI: SSDT 00000000cfe5fe00 000AD (v01 HP CPU6CST 00000001 INTL 20061109) [ 0.928526] ACPI: Dynamic OEM Table Load: [ 0.928530] ACPI: SSDT (null) 000AD (v01 HP CPU6CST 00000001 INTL 20061109) [ 0.960319] ACPI: SSDT 00000000cfe5ff00 000AD (v01 HP CPU7CST 00000001 INTL 20061109) [ 0.960528] ACPI: Dynamic OEM Table Load: [ 0.960532] ACPI: SSDT (null) 000AD (v01 HP CPU7CST 00000001 INTL 20061109) [ 0.984204] ACPI: Interpreter enabled [ 0.984212] ACPI: (supports S0 S4 S5) [ 0.984230] ACPI: Using IOAPIC for interrupt routing [ 0.987416] ACPI: No dock devices found. [ 0.987420] HEST: Table parsing has been initialized. [ 0.987424] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.987491] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) [ 0.987616] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.987619] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.987621] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.987624] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff] [ 0.987626] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.987645] pci 0000:00:00.0: [8086:25d8] type 0 class 0x000600 [ 0.987685] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.987689] pci 0000:00:00.0: PME# disabled [ 0.987709] pci 0000:00:02.0: [8086:25e2] type 1 class 0x000604 [ 0.987742] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.987745] pci 0000:00:02.0: PME# disabled [ 0.987762] pci 0000:00:03.0: [8086:25e3] type 1 class 0x000604 [ 0.987795] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.987798] pci 0000:00:03.0: PME# disabled [ 0.987815] pci 0000:00:04.0: [8086:25f8] type 1 class 0x000604 [ 0.987848] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.987851] pci 0000:00:04.0: PME# disabled [ 0.987868] pci 0000:00:05.0: [8086:25e5] type 1 class 0x000604 [ 0.987902] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.987905] pci 0000:00:05.0: PME# disabled [ 0.987922] pci 0000:00:06.0: [8086:25f9] type 1 class 0x000604 [ 0.987955] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.987958] pci 0000:00:06.0: PME# disabled [ 0.987975] pci 0000:00:07.0: [8086:25e7] type 1 class 0x000604 [ 0.988008] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.988011] pci 0000:00:07.0: PME# disabled [ 0.988030] pci 0000:00:10.0: [8086:25f0] type 0 class 0x000600 [ 0.988080] pci 0000:00:10.1: [8086:25f0] type 0 class 0x000600 [ 0.988107] pci 0000:00:10.2: [8086:25f0] type 0 class 0x000600 [ 0.988139] pci 0000:00:11.0: [8086:25f1] type 0 class 0x000600 [ 0.988166] pci 0000:00:13.0: [8086:25f3] type 0 class 0x000600 [ 0.988194] pci 0000:00:15.0: [8086:25f5] type 0 class 0x000600 [ 0.988220] pci 0000:00:16.0: [8086:25f6] type 0 class 0x000600 [ 0.988257] pci 0000:00:1c.0: [8086:2690] type 1 class 0x000604 [ 0.988311] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.988315] pci 0000:00:1c.0: PME# disabled [ 0.988337] pci 0000:00:1c.1: [8086:2692] type 1 class 0x000604 [ 0.988390] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.988394] pci 0000:00:1c.1: PME# disabled [ 0.988423] pci 0000:00:1d.0: [8086:2688] type 0 class 0x000c03 [ 0.988474] pci 0000:00:1d.0: reg 20: [io 0x1000-0x101f] [ 0.988511] pci 0000:00:1d.1: [8086:2689] type 0 class 0x000c03 [ 0.988562] pci 0000:00:1d.1: reg 20: [io 0x1020-0x103f] [ 0.988597] pci 0000:00:1d.2: [8086:268a] type 0 class 0x000c03 [ 0.988650] pci 0000:00:1d.2: reg 20: [io 0x1040-0x105f] [ 0.988687] pci 0000:00:1d.3: [8086:268b] type 0 class 0x000c03 [ 0.988738] pci 0000:00:1d.3: reg 20: [io 0x1060-0x107f] [ 0.988782] pci 0000:00:1d.7: [8086:268c] type 0 class 0x000c03 [ 0.988801] pci 0000:00:1d.7: reg 10: [mem 0xf7df0000-0xf7df03ff] [ 0.988869] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.988873] pci 0000:00:1d.7: PME# disabled [ 0.988891] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.988944] pci 0000:00:1f.0: [8086:2670] type 0 class 0x000601 [ 0.989025] pci 0000:00:1f.1: [8086:269e] type 0 class 0x000101 [ 0.989038] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] [ 0.989047] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] [ 0.989056] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] [ 0.989065] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] [ 0.989075] pci 0000:00:1f.1: reg 20: [io 0x0500-0x050f] [ 0.989451] pci 0000:09:00.0: [8086:3500] type 1 class 0x000604 [ 0.991736] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold [ 0.991828] pci 0000:09:00.0: PME# disabled [ 0.992699] pci 0000:09:00.3: [8086:350c] type 1 class 0x000604 [ 0.994802] pci 0000:09:00.3: PME# supported from D0 D3hot D3cold [ 0.994893] pci 0000:09:00.3: PME# disabled [ 0.995488] pci 0000:09:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.995719] pci 0000:00:02.0: PCI bridge to [bus 09-10] [ 0.995724] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 0.997523] pci 0000:0a:00.0: [8086:3510] type 1 class 0x000604 [ 1.000148] pci 0000:0a:00.0: PME# supported from D0 D3hot D3cold [ 1.000238] pci 0000:0a:00.0: PME# disabled [ 1.000787] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.001153] pci 0000:0a:01.0: [8086:3514] type 1 class 0x000604 [ 1.003758] pci 0000:0a:01.0: PME# supported from D0 D3hot D3cold [ 1.003849] pci 0000:0a:01.0: PME# disabled [ 1.004381] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.004747] pci 0000:0a:02.0: [8086:3518] type 1 class 0x000604 [ 1.007352] pci 0000:0a:02.0: PME# supported from D0 D3hot D3cold [ 1.007443] pci 0000:0a:02.0: PME# disabled [ 1.007946] pci 0000:0a:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.009067] Freeing initrd memory: 14276k freed [ 1.009252] pci 0000:09:00.0: PCI bridge to [bus 0a-0f] [ 1.011399] pci 0000:0a:00.0: PCI bridge to [bus 0b-0d] [ 1.013612] pci 0000:0a:01.0: PCI bridge to [bus 0e-0e] [ 1.015804] pci 0000:0a:02.0: PCI bridge to [bus 0f-0f] [ 1.019528] pci 0000:09:00.3: PCI bridge to [bus 10-10] [ 1.020282] pci 0000:06:00.0: [103c:3230] type 0 class 0x000104 [ 1.020302] pci 0000:06:00.0: reg 10: [mem 0xfde00000-0xfdefffff 64bit] [ 1.020311] pci 0000:06:00.0: reg 18: [io 0x4000-0x40ff] [ 1.020324] pci 0000:06:00.0: reg 1c: [mem 0xfddf0000-0xfddf0fff 64bit] [ 1.020341] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0003ffff pref] [ 1.020372] pci 0000:06:00.0: supports D1 [ 1.020387] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.020397] pci 0000:00:03.0: PCI bridge to [bus 06-08] [ 1.020400] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff] [ 1.020404] pci 0000:00:03.0: bridge window [mem 0xfdd00000-0xfdefffff] [ 1.020442] pci 0000:11:00.0: [8086:032c] type 1 class 0x000604 [ 1.020458] pci 0000:11:00.0: PXH quirk detected; SHPC device MSI disabled [ 1.020503] pci 0000:11:00.0: PME# supported from D0 D3hot D3cold [ 1.020507] pci 0000:11:00.0: PME# disabled [ 1.020525] pci 0000:11:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.020531] pci 0000:00:04.0: PCI bridge to [bus 11-15] [ 1.020597] pci 0000:11:00.0: PCI bridge to [bus 12-15] [ 1.020634] pci 0000:00:05.0: PCI bridge to [bus 16-16] [ 1.020667] pci 0000:00:06.0: PCI bridge to [bus 17-17] [ 1.020711] pci 0000:00:07.0: PCI bridge to [bus 18-18] [ 1.020769] pci 0000:02:00.0: [1166:0103] type 1 class 0x000604 [ 1.020839] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.020844] pci 0000:02:00.0: PME# disabled [ 1.020865] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.020874] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 1.020880] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf9ffffff] [ 1.020947] pci 0000:03:00.0: [14e4:164c] type 0 class 0x000200 [ 1.020975] pci 0000:03:00.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit] [ 1.021029] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.021064] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 1.021069] pci 0000:03:00.0: PME# disabled [ 1.021130] pci 0000:02:00.0: PCI bridge to [bus 03-03] [ 1.021140] pci 0000:02:00.0: bridge window [mem 0xf8000000-0xf9ffffff] [ 1.021206] pci 0000:04:00.0: [1166:0103] type 1 class 0x000604 [ 1.021275] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 1.021280] pci 0000:04:00.0: PME# disabled [ 1.021300] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 1.021309] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 1.021315] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff] [ 1.021379] pci 0000:05:00.0: [14e4:164c] type 0 class 0x000200 [ 1.021406] pci 0000:05:00.0: reg 10: [mem 0xfa000000-0xfbffffff 64bit] [ 1.021460] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.021494] pci 0000:05:00.0: PME# supported from D3hot D3cold [ 1.021499] pci 0000:05:00.0: PME# disabled [ 1.021560] pci 0000:04:00.0: PCI bridge to [bus 05-05] [ 1.021571] pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfbffffff] [ 1.021622] pci 0000:01:03.0: [1002:515e] type 0 class 0x000300 [ 1.021640] pci 0000:01:03.0: reg 10: [mem 0xd8000000-0xdfffffff pref] [ 1.021651] pci 0000:01:03.0: reg 14: [io 0x3000-0x30ff] [ 1.021662] pci 0000:01:03.0: reg 18: [mem 0xf7ff0000-0xf7ffffff] [ 1.021698] pci 0000:01:03.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 1.021718] pci 0000:01:03.0: supports D1 D2 [ 1.021736] pci 0000:01:04.0: [0e11:b203] type 0 class 0x000880 [ 1.021754] pci 0000:01:04.0: reg 10: [io 0x2800-0x28ff] [ 1.021764] pci 0000:01:04.0: reg 14: [mem 0xf7fe0000-0xf7fe01ff] [ 1.021824] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold [ 1.021829] pci 0000:01:04.0: PME# disabled [ 1.021849] pci 0000:01:04.2: [0e11:b204] type 0 class 0x000880 [ 1.021869] pci 0000:01:04.2: reg 10: [io 0x3400-0x34ff] [ 1.021881] pci 0000:01:04.2: reg 14: [mem 0xf7fd0000-0xf7fd07ff] [ 1.021892] pci 0000:01:04.2: reg 18: [mem 0xf7fc0000-0xf7fc3fff] [ 1.021904] pci 0000:01:04.2: reg 1c: [mem 0xf7f00000-0xf7f7ffff] [ 1.021934] pci 0000:01:04.2: reg 30: [mem 0x00000000-0x0000ffff pref] [ 1.021956] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold [ 1.021961] pci 0000:01:04.2: PME# disabled [ 1.021982] pci 0000:01:04.4: [103c:3300] type 0 class 0x000c03 [ 1.022038] pci 0000:01:04.4: reg 20: [io 0x3800-0x381f] [ 1.022079] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold [ 1.022084] pci 0000:01:04.4: PME# disabled [ 1.022104] pci 0000:01:04.6: [103c:3302] type 0 class 0x000c07 [ 1.022122] pci 0000:01:04.6: reg 10: [mem 0xf7ef0000-0xf7ef00ff] [ 1.022190] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold [ 1.022195] pci 0000:01:04.6: PME# disabled [ 1.022238] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 1.022242] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff] [ 1.022245] pci 0000:00:1e.0: bridge window [mem 0xf7e00000-0xf7ffffff] [ 1.022251] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 1.022254] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.022257] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.022260] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.022262] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode) [ 1.022265] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) [ 1.022302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.022396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] [ 1.022433] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTA._PRT] [ 1.022455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTB._PRT] [ 1.022476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT] [ 1.022488] ACPI Warning: For \_SB_.PCI0.PT02._PRT: Return Package has no elements (empty) (20110623/nspredef-463) [ 1.022500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT] [ 1.022533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1._PRT] [ 1.022633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE3._PRT] [ 1.022667] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT] [ 1.022728] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT] [ 1.022750] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04.PXHA._PRT] [ 1.022820] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06._PRT] [ 1.022888] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 1.022891] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 1.022893] ACPI _OSC control for PCIe not granted, disabling ASPM [ 1.026303] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11) [ 1.026344] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) [ 1.026382] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11) [ 1.026418] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) [ 1.026455] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled. [ 1.026493] ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) [ 1.026530] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11) [ 1.026567] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11) [ 1.026694] vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=io+mem,locks=none [ 1.026694] vgaarb: loaded [ 1.026694] vgaarb: bridge control possible 0000:01:03.0 [ 1.026694] i2c-core: driver [aat2870] using legacy suspend method [ 1.026694] i2c-core: driver [aat2870] using legacy resume method [ 1.026694] SCSI subsystem initialized [ 1.026932] libata version 3.00 loaded. [ 1.026932] usbcore: registered new interface driver usbfs [ 1.026932] usbcore: registered new interface driver hub [ 1.026932] usbcore: registered new device driver usb [ 1.026932] PCI: Using ACPI for IRQ routing [ 1.034515] PCI: pci_cache_line_size set to 64 bytes [ 1.035044] reserve RAM buffer: 000000000009f400 - 000000000009ffff [ 1.035047] reserve RAM buffer: 00000000cfe54000 - 00000000cfffffff [ 1.035049] reserve RAM buffer: 00000000cfe5d000 - 00000000cfffffff [ 1.035051] reserve RAM buffer: 000000012ffff000 - 000000012fffffff [ 1.035177] NetLabel: Initializing [ 1.035179] NetLabel: domain hash size = 128 [ 1.035180] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.035193] NetLabel: unlabeled traffic allowed by default [ 1.035229] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 1.035229] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.035229] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.052086] Switching to clocksource hpet [ 1.060385] AppArmor: AppArmor Filesystem Enabled [ 1.060419] pnp: PnP ACPI init [ 1.060443] ACPI: bus type pnp registered [ 1.060537] pnp 00:00: [bus 00-7f] [ 1.060540] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.060543] pnp 00:00: [io 0x0d00-0xffff window] [ 1.060545] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.060547] pnp 00:00: [mem 0xd0000000-0xdfffffff window] [ 1.060549] pnp 00:00: [mem 0xf0000000-0xfebfffff window] [ 1.060612] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 PNP0a08 (active) [ 1.060721] pnp 00:01: [io 0x0070-0x0077] [ 1.060726] pnp 00:01: [io 0x0408-0x040f] [ 1.060728] pnp 00:01: [io 0x04d0-0x04d1] [ 1.060730] pnp 00:01: [io 0x0020-0x003f] [ 1.060732] pnp 00:01: [io 0x00a0-0x00bf] [ 1.060733] pnp 00:01: [io 0x0090-0x009f] [ 1.060735] pnp 00:01: [io 0x0050-0x0053] [ 1.060737] pnp 00:01: [io 0x0700-0x071f] [ 1.060739] pnp 00:01: [io 0x0800-0x083f] [ 1.060741] pnp 00:01: [io 0x0900-0x097f] [ 1.060742] pnp 00:01: [io 0x0010-0x001f] [ 1.060744] pnp 00:01: [io 0x0c80-0x0c83] [ 1.060746] pnp 00:01: [io 0x0cd4-0x0cd7] [ 1.060747] pnp 00:01: [io 0x0f50-0x0f58] [ 1.060749] pnp 00:01: [io 0x00f0] [ 1.060751] pnp 00:01: [io 0x0ca0-0x0ca1] [ 1.060752] pnp 00:01: [io 0x0ca4-0x0ca5] [ 1.060754] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 1.060756] pnp 00:01: [mem 0xfe000000-0xfebfffff] [ 1.060758] pnp 00:01: [io 0x03f8-0x03ff] [ 1.060864] system 00:01: [io 0x0408-0x040f] has been reserved [ 1.060867] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 1.060869] system 00:01: [io 0x0700-0x071f] has been reserved [ 1.060872] system 00:01: [io 0x0800-0x083f] has been reserved [ 1.060874] system 00:01: [io 0x0900-0x097f] has been reserved [ 1.060877] system 00:01: [io 0x0c80-0x0c83] has been reserved [ 1.060879] system 00:01: [io 0x0cd4-0x0cd7] has been reserved [ 1.060881] system 00:01: [io 0x0f50-0x0f58] has been reserved [ 1.060884] system 00:01: [io 0x0ca0-0x0ca1] has been reserved [ 1.060886] system 00:01: [io 0x0ca4-0x0ca5] has been reserved [ 1.060888] system 00:01: [io 0x03f8-0x03ff] has been reserved [ 1.060892] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 1.060894] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved [ 1.060898] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.060907] pnp 00:02: [io 0x0ca2-0x0ca3] [ 1.060946] pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active) [ 1.060967] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 1.061004] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.061014] pnp 00:04: [dma 7] [ 1.061016] pnp 00:04: [io 0x0000-0x000f] [ 1.061018] pnp 00:04: [io 0x0080-0x008f] [ 1.061020] pnp 00:04: [io 0x00c0-0x00df] [ 1.061062] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.061071] pnp 00:05: [io 0x0061] [ 1.061114] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.061123] pnp 00:06: [io 0x0060] [ 1.061125] pnp 00:06: [io 0x0064] [ 1.061137] pnp 00:06: [irq 1] [ 1.061173] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.061185] pnp 00:07: [irq 12] [ 1.061227] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 1.061237] pnp 00:08: [io 0x002e-0x002f] [ 1.061239] pnp 00:08: [io 0x004e-0x004f] [ 1.061241] pnp 00:08: [io 0x0620-0x065f] [ 1.061243] pnp 00:08: [io 0x0680-0x069f] [ 1.061245] pnp 00:08: [io 0x0600-0x061f] [ 1.061247] pnp 00:08: [io 0x0660-0x067f] [ 1.061248] pnp 00:08: [io 0x0300-0x030f] [ 1.061289] pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active) [ 1.061394] pnp 00:09: [irq 3] [ 1.061396] pnp 00:09: [io 0x02f8-0x02ff] [ 1.061502] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 1.061641] pnp: PnP ACPI: found 10 devices [ 1.061643] ACPI: ACPI bus type pnp unregistered [ 1.069774] PCI: max bus depth: 3 pci_try_num: 4 [ 1.071129] pci 0000:00:03.0: BAR 15: assigned [mem 0xd0000000-0xd00fffff pref] [ 1.071132] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0100000-0xd01fffff pref] [ 1.071136] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd0200000-0xd02fffff pref] [ 1.071139] pci 0000:0a:00.0: PCI bridge to [bus 0b-0d] [ 1.071515] pci 0000:0a:01.0: PCI bridge to [bus 0e-0e] [ 1.071927] pci 0000:0a:02.0: PCI bridge to [bus 0f-0f] [ 1.072346] pci 0000:09:00.0: PCI bridge to [bus 0a-0f] [ 1.072757] pci 0000:09:00.3: PCI bridge to [bus 10-10] [ 1.073031] pci 0000:00:02.0: PCI bridge to [bus 09-10] [ 1.073035] pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff] [ 1.073042] pci 0000:06:00.0: BAR 6: assigned [mem 0xd0000000-0xd003ffff pref] [ 1.073045] pci 0000:00:03.0: PCI bridge to [bus 06-08] [ 1.073047] pci 0000:00:03.0: bridge window [io 0x4000-0x4fff] [ 1.073051] pci 0000:00:03.0: bridge window [mem 0xfdd00000-0xfdefffff] [ 1.073055] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xd00fffff pref] [ 1.073059] pci 0000:11:00.0: PCI bridge to [bus 12-15] [ 1.073068] pci 0000:00:04.0: PCI bridge to [bus 11-15] [ 1.073076] pci 0000:00:05.0: PCI bridge to [bus 16-16] [ 1.073083] pci 0000:00:06.0: PCI bridge to [bus 17-17] [ 1.073090] pci 0000:00:07.0: PCI bridge to [bus 18-18] [ 1.073098] pci 0000:02:00.0: BAR 15: assigned [mem 0xd0100000-0xd01fffff pref] [ 1.073101] pci 0000:03:00.0: BAR 6: assigned [mem 0xd0100000-0xd011ffff pref] [ 1.073104] pci 0000:02:00.0: PCI bridge to [bus 03-03] [ 1.073110] pci 0000:02:00.0: bridge window [mem 0xf8000000-0xf9ffffff] [ 1.073115] pci 0000:02:00.0: bridge window [mem 0xd0100000-0xd01fffff pref] [ 1.073122] pci 0000:00:1c.0: PCI bridge to [bus 02-03] [ 1.073127] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf9ffffff] [ 1.073131] pci 0000:00:1c.0: bridge window [mem 0xd0100000-0xd01fffff pref] [ 1.073137] pci 0000:04:00.0: BAR 15: assigned [mem 0xd0200000-0xd02fffff pref] [ 1.073140] pci 0000:05:00.0: BAR 6: assigned [mem 0xd0200000-0xd021ffff pref] [ 1.073142] pci 0000:04:00.0: PCI bridge to [bus 05-05] [ 1.073148] pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfbffffff] [ 1.073153] pci 0000:04:00.0: bridge window [mem 0xd0200000-0xd02fffff pref] [ 1.073161] pci 0000:00:1c.1: PCI bridge to [bus 04-05] [ 1.073166] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff] [ 1.073170] pci 0000:00:1c.1: bridge window [mem 0xd0200000-0xd02fffff pref] [ 1.073177] pci 0000:01:03.0: BAR 6: assigned [mem 0xf7e00000-0xf7e1ffff pref] [ 1.073181] pci 0000:01:04.2: BAR 6: assigned [mem 0xf7e20000-0xf7e2ffff pref] [ 1.073183] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 1.073186] pci 0000:00:1e.0: bridge window [io 0x2000-0x3fff] [ 1.073191] pci 0000:00:1e.0: bridge window [mem 0xf7e00000-0xf7ffffff] [ 1.073195] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xdfffffff 64bit pref] [ 1.073208] pci 0000:00:02.0: setting latency timer to 64 [ 1.073351] pci 0000:09:00.0: setting latency timer to 64 [ 1.073498] pci 0000:0a:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.073580] pci 0000:0a:00.0: setting latency timer to 64 [ 1.073722] pci 0000:0a:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.073808] pci 0000:0a:01.0: setting latency timer to 64 [ 1.073949] pci 0000:0a:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.074037] pci 0000:0a:02.0: setting latency timer to 64 [ 1.074265] pci 0000:09:00.3: setting latency timer to 64 [ 1.074314] pci 0000:00:03.0: setting latency timer to 64 [ 1.074319] pci 0000:00:04.0: setting latency timer to 64 [ 1.074325] pci 0000:11:00.0: setting latency timer to 64 [ 1.074331] pci 0000:00:05.0: setting latency timer to 64 [ 1.074336] pci 0000:00:06.0: setting latency timer to 64 [ 1.074341] pci 0000:00:07.0: setting latency timer to 64 [ 1.074346] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.074350] pci 0000:00:1c.0: setting latency timer to 64 [ 1.074359] pci 0000:02:00.0: setting latency timer to 64 [ 1.074365] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.074369] pci 0000:00:1c.1: setting latency timer to 64 [ 1.074378] pci 0000:04:00.0: setting latency timer to 64 [ 1.074384] pci 0000:00:1e.0: setting latency timer to 64 [ 1.074388] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.074390] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.074393] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.074395] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xdfffffff] [ 1.074397] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff] [ 1.074400] pci_bus 0000:09: resource 1 [mem 0xfdf00000-0xfdffffff] [ 1.074402] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] [ 1.074404] pci_bus 0000:06: resource 1 [mem 0xfdd00000-0xfdefffff] [ 1.074407] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff pref] [ 1.074409] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xf9ffffff] [ 1.074412] pci_bus 0000:02: resource 2 [mem 0xd0100000-0xd01fffff pref] [ 1.074414] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xf9ffffff] [ 1.074416] pci_bus 0000:03: resource 2 [mem 0xd0100000-0xd01fffff pref] [ 1.074419] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfbffffff] [ 1.074421] pci_bus 0000:04: resource 2 [mem 0xd0200000-0xd02fffff pref] [ 1.074423] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfbffffff] [ 1.074425] pci_bus 0000:05: resource 2 [mem 0xd0200000-0xd02fffff pref] [ 1.074427] pci_bus 0000:01: resource 0 [io 0x2000-0x3fff] [ 1.074430] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7ffffff] [ 1.074432] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff 64bit pref] [ 1.074434] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 1.074436] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 1.074438] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 1.074440] pci_bus 0000:01: resource 7 [mem 0xd0000000-0xdfffffff] [ 1.074442] pci_bus 0000:01: resource 8 [mem 0xf0000000-0xfebfffff] [ 1.074488] NET: Registered protocol family 2 [ 1.074669] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.075972] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.080146] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.080669] TCP: Hash tables configured (established 524288 bind 65536) [ 1.080671] TCP reno registered [ 1.080683] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 1.080723] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 1.080889] NET: Registered protocol family 1 [ 1.096052] pci 0000:00:1f.0: rerouting interrupts for [8086:2670] [ 1.096063] pci 0000:01:03.0: Boot video device [ 1.097228] pci 0000:11:00.0: rerouting interrupts for [8086:032c] [ 1.097232] PCI: CLS 64 bytes, default 64 [ 1.097235] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.097237] Placing 64MB software IO TLB between ffff8800cbe4d000 - ffff8800cfe4d000 [ 1.097239] software IO TLB at phys 0xcbe4d000 - 0xcfe4d000 [ 1.097317] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.097976] audit: initializing netlink socket (disabled) [ 1.097988] type=2000 audit(1326314105.092:1): initialized [ 1.138717] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.174043] VFS: Disk quotas dquot_6.5.2 [ 1.174119] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.174810] fuse init (API version 7.17) [ 1.174930] msgmni has been set to 7898 [ 1.175485] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.175528] io scheduler noop registered [ 1.175530] io scheduler deadline registered [ 1.175570] io scheduler cfq registered (default) [ 1.175909] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.175959] pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X [ 1.176040] pcieport 0000:00:1c.1: setting latency timer to 64 [ 1.176080] pcieport 0000:00:1c.1: irq 65 for MSI/MSI-X [ 1.181558] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.181586] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.181659] intel_idle: MWAIT substates: 0x20 [ 1.181662] intel_idle: does not run on family 6 model 15 [ 1.181775] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.181782] ACPI: Power Button [PWRF] [ 1.183319] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.183322] ACPI: Thermal Zone [THM0] (8 C) [ 1.183374] ERST: Failed to get Error Log Address Range. [ 1.240087] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.240158] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.260609] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.348387] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.428530] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.468260] Linux agpgart interface v0.103 [ 1.470265] brd: module loaded [ 1.471286] loop: module loaded [ 1.471490] ata_piix 0000:00:1f.1: version 2.13 [ 1.471503] ata_piix 0000:00:1f.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.471542] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.471931] scsi0 : ata_piix [ 1.472036] scsi1 : ata_piix [ 1.472089] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14 [ 1.472092] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15 [ 1.472509] Fixed MDIO Bus: probed [ 1.472538] tun: Universal TUN/TAP device driver, 1.6 [ 1.472540] tun: (C) 1999-2004 Max Krasnyansky [ 1.472596] arcnet loaded. [ 1.472599] PPP generic driver version 2.4.2 [ 1.472723] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.472746] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.472771] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.472775] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.472836] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.472866] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.476741] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.476757] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf7df0000 [ 1.492013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.492178] hub 1-0:1.0: USB hub found [ 1.492185] hub 1-0:1.0: 8 ports detected [ 1.492291] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.492311] uhci_hcd: USB Universal Host Controller Interface driver [ 1.492329] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.492335] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.492339] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.492396] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.492420] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000 [ 1.492567] hub 2-0:1.0: USB hub found [ 1.492572] hub 2-0:1.0: 2 ports detected [ 1.492653] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.492660] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.492663] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.492719] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.492751] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001020 [ 1.492900] hub 3-0:1.0: USB hub found [ 1.492905] hub 3-0:1.0: 2 ports detected [ 1.492993] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.492999] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.493002] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.493067] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.493098] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001040 [ 1.493250] hub 4-0:1.0: USB hub found [ 1.493255] hub 4-0:1.0: 2 ports detected [ 1.493344] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.493350] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.493353] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.493409] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.493443] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001060 [ 1.493594] hub 5-0:1.0: USB hub found [ 1.493598] hub 5-0:1.0: 2 ports detected [ 1.493688] uhci_hcd 0000:01:04.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 1.493695] uhci_hcd 0000:01:04.4: UHCI Host Controller [ 1.493750] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6 [ 1.493763] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports [ 1.494737] uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800 [ 1.495092] hub 6-0:1.0: USB hub found [ 1.495097] hub 6-0:1.0: 2 ports detected [ 1.495250] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 1.496920] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.496939] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.497135] mousedev: PS/2 mouse device common for all mice [ 1.497302] rtc_cmos rtc_cmos: RTC can wake from S4 [ 1.497448] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.497473] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.497591] device-mapper: uevent: version 1.0.3 [ 1.497702] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.497712] cpuidle: using governor ladder [ 1.497714] cpuidle: using governor menu [ 1.497716] EFI Variables Facility v0.08 2004-May-17 [ 1.498029] TCP cubic registered [ 1.498160] NET: Registered protocol family 10 [ 1.498695] NET: Registered protocol family 17 [ 1.498711] Registering the dns_resolver key type [ 1.498887] PM: Hibernation image not present or could not be loaded. [ 1.498901] registered taskstats version 1 [ 1.524950] Magic number: 12:944:598 [ 1.525081] rtc_cmos rtc_cmos: setting system clock to 2012-01-11 20:35:06 UTC (1326314106) [ 1.525132] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.525134] EDD information not available. [ 1.644307] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NS02, max UDMA/33 [ 1.660181] ata1.00: configured for UDMA/33 [ 1.665516] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NS02 PQ: 0 ANSI: 5 [ 1.669210] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.669213] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.669418] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.669512] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.671406] Freeing unused kernel memory: 916k freed [ 1.671734] Write protecting the kernel read-only data: 12288k [ 1.678101] Freeing unused kernel memory: 1648k freed [ 1.683292] Freeing unused kernel memory: 1212k freed [ 1.704991] udevd[119]: starting version 175 [ 1.735981] HP CISS Driver (v 3.6.26) [ 1.736175] cciss 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.736246] cciss 0000:06:00.0: irq 66 for MSI/MSI-X [ 1.736252] cciss 0000:06:00.0: irq 67 for MSI/MSI-X [ 1.736258] cciss 0000:06:00.0: irq 68 for MSI/MSI-X [ 1.736266] cciss 0000:06:00.0: irq 69 for MSI/MSI-X [ 1.738131] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.1.11 (July 20, 2011) [ 1.738171] bnx2 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.816089] cciss 0000:06:00.0: cciss0: <0x3230> at PCI 0000:06:00.0 IRQ 66 using DAC [ 1.819363] cciss/c0d0: p1 p2 < p5 > [ 1.820843] cciss/c0d1: unknown partition table [ 1.821124] scsi2 : cciss [ 1.916036] usb 6-1: new full-speed USB device number 2 using uhci_hcd [ 2.076524] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.0/input/input1 [ 2.076644] generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0 [ 2.082986] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.1/input/input2 [ 2.083150] generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1 [ 2.083179] usbcore: registered new interface driver usbhid [ 2.083181] usbhid: USB HID core driver [ 2.096031] Refined TSC clocksource calibration: 2333.332 MHz. [ 2.096038] Switching to clocksource tsc [ 2.202618] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem [ 2.202623] EXT4-fs (dm-1): write access will be enabled during recovery [ 2.216669] bnx2 0000:03:00.0: eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:23:7d:62:b0:02 [ 2.216712] bnx2 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.312014] usb 4-1: new full-speed USB device number 2 using uhci_hcd [ 2.322058] EXT4-fs (dm-1): recovery complete [ 2.322166] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 2.464218] hub 4-1:1.0: USB hub found [ 2.466144] hub 4-1:1.0: 4 ports detected [ 2.696656] bnx2 0000:05:00.0: eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 17, node addr 00:23:7d:62:b0:00 [ 2.749143] usb 4-1.1: new low-speed USB device number 3 using uhci_hcd [ 2.983479] input: ATEN CS1308 V1.2.114 as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1.1/4-1.1:1.0/input/input3 [ 2.983594] generic-usb 0003:0557:2261.0003: input,hidraw2: USB HID v1.10 Keyboard [ATEN CS1308 V1.2.114] on usb-0000:00:1d.2-1.1/input0 [ 3.028446] input: ATEN CS1308 V1.2.114 as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1.1/4-1.1:1.1/input/input4 [ 3.028598] generic-usb 0003:0557:2261.0004: input,hidraw3: USB HID v1.10 Mouse [ATEN CS1308 V1.2.114] on usb-0000:00:1d.2-1.1/input1 [ 6.246913] udevd[348]: starting version 175 [ 6.263537] lp: driver loaded but no devices found [ 6.297808] Adding 4190204k swap on /dev/mapper/srv--bonding-swap_1. Priority:-1 extents:1 across:4190204k [ 6.318872] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.346961] intel_rng: FWH not detected [ 6.348311] hpilo 0000:01:04.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 6.349022] ipmi message handler version 39.2 [ 6.349613] IPMI System Interface driver. [ 6.349649] ipmi_si 0000:01:04.6: probing via PCI [ 6.349674] ipmi_si 0000:01:04.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 6.349679] ipmi_si 0000:01:04.6: [mem 0xf7ef0000-0xf7ef00ff] regsize 1 spacing 1 irq 21 [ 6.349681] ipmi_si: Adding PCI-specified kcs state machine [ 6.349714] ipmi_si: probing via ACPI [ 6.349753] ipmi_si 00:02: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0 [ 6.349756] ipmi_si: Adding ACPI-specified kcs state machine [ 6.349771] ipmi_si: probing via SMBIOS [ 6.349774] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 6.349776] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface [ 6.349780] ipmi_si: probing via SPMI [ 6.349782] ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0 [ 6.349784] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface [ 6.349788] ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 21 [ 6.353437] [drm] Initialized drm 1.1.0 20060810 [ 6.354494] EDAC MC: Ver: 2.1.0 [ 6.355763] EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0 [ 6.355793] EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED) [ 6.368063] [drm] radeon defaulting to kernel modesetting. [ 6.368067] [drm] radeon kernel modesetting enabled. [ 6.368185] radeon 0000:01:03.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 6.368427] [drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x103C:0x31FB). [ 6.368466] [drm] register mmio base: 0xF7FF0000 [ 6.368468] [drm] register mmio size: 65536 [ 6.368643] radeon 0000:01:03.0: VRAM: 128M 0x00000000D8000000 - 0x00000000DFFFFFFF (32M used) [ 6.368647] radeon 0000:01:03.0: GTT: 512M 0x00000000B8000000 - 0x00000000D7FFFFFF [ 6.368654] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.368656] [drm] Driver supports precise vblank timestamp query. [ 6.368680] [drm] radeon: irq initialized. [ 6.376100] [drm] Detected VRAM RAM=128M, BAR=128M [ 6.376106] [drm] RAM width 16bits DDR [ 6.376261] [TTM] Zone kernel: Available graphics memory: 2023806 kiB. [ 6.376263] [TTM] Initializing pool allocator. [ 6.376311] [drm] radeon: 32M of VRAM memory ready [ 6.376314] [drm] radeon: 512M of GTT memory ready. [ 6.376349] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 6.398473] [drm] PCIE GART of 512M enabled (table at 0x0000000036E00000). [ 6.398852] radeon 0000:01:03.0: WB enabled [ 6.398974] [drm] Loading R100 Microcode [ 6.436713] [drm] radeon: ring at 0x00000000B8001000 [ 6.436740] [drm] ring test succeeded in 2 usecs [ 6.436868] [drm] radeon: ib pool ready. [ 6.444030] [drm] ib test succeeded in 0 usecs [ 6.444373] [drm] Radeon Display Connectors [ 6.444375] [drm] Connector 0: [ 6.444377] [drm] VGA [ 6.444379] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 6.444381] [drm] Encoders: [ 6.444382] [drm] CRT1: INTERNAL_DAC1 [ 6.444384] [drm] Connector 1: [ 6.444386] [drm] VGA [ 6.444388] [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c [ 6.444389] [drm] Encoders: [ 6.444391] [drm] CRT2: INTERNAL_DAC2 [ 6.512078] ipmi_si 0000:01:04.6: Using irq 21 [ 6.530010] type=1400 audit(1326314111.499:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=617 comm="apparmor_parser" [ 6.530030] type=1400 audit(1326314111.499:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=626 comm="apparmor_parser" [ 6.530044] type=1400 audit(1326314111.499:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=625 comm="apparmor_parser" [ 6.530294] type=1400 audit(1326314111.499:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=617 comm="apparmor_parser" [ 6.530321] type=1400 audit(1326314111.499:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=626 comm="apparmor_parser" [ 6.530340] type=1400 audit(1326314111.499:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=625 comm="apparmor_parser" [ 6.530480] type=1400 audit(1326314111.499:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=617 comm="apparmor_parser" [ 6.530526] type=1400 audit(1326314111.499:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=626 comm="apparmor_parser" [ 6.530535] type=1400 audit(1326314111.499:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=625 comm="apparmor_parser" [ 6.541504] [drm] fb mappable at 0xD8040000 [ 6.541508] [drm] vram apper at 0xD8000000 [ 6.541510] [drm] size 786432 [ 6.541512] [drm] fb depth is 8 [ 6.541513] [drm] pitch is 1024 [ 6.541627] fbcon: radeondrmfb (fb0) is primary device [ 6.629677] bnx2 0000:05:00.0: irq 70 for MSI/MSI-X [ 6.634606] ipmi_si 0000:01:04.6: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) [ 6.634618] ipmi_si 0000:01:04.6: IPMI kcs interface initialized [ 6.638764] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 6.690758] Console: switching to colour frame buffer device 128x48 [ 6.698334] fb0: radeondrmfb frame buffer device [ 6.698336] drm: registered panic notifier [ 6.698355] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:03.0 on minor 0 [ 6.748100] bnx2 0000:05:00.0: eth1: using MSI [ 6.748631] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 6.754198] bnx2 0000:03:00.0: irq 71 for MSI/MSI-X [ 6.872013] bnx2 0000:03:00.0: eth0: using MSI [ 6.872570] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.932878] bnx2 0000:03:00.0: eth0: NIC Copper Link is Up, 1000 Mbps full duplex [ 9.933448] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9.948922] bnx2 0000:05:00.0: eth1: NIC Copper Link is Up, 1000 Mbps full duplex [ 9.949499] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 15.282059] init: failsafe main process (739) killed by TERM signal [ 15.300977] type=1400 audit(1326314120.271:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=904 comm="apparmor_parser" [ 15.301194] type=1400 audit(1326314120.271:12): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=903 comm="apparmor_parser" [ 15.301514] type=1400 audit(1326314120.271:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=903 comm="apparmor_parser" [ 15.301705] type=1400 audit(1326314120.271:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=903 comm="apparmor_parser"