Intel
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU:     After generic, caps: 0080fbff 00000000 00000000 00000000
CPU:             Common caps: 0080fbff 00000000 00000000 00000000
CPU0: Intel Pentium II (Klamath) stepping 04
per-CPU timeslice cutoff: 1462.77 usecs.
SMP motherboard not detected.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 298.7292 MHz.
..... host bus clock speed is 66.3841 MHz.
cpu: 0, clocks: 663841, slice: 331920
CPU0<T0:663840,T1:331920,D:0,S:331920,C:663841>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX/ICH [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: Card 'On Board Sound CS4237B'
isapnp: Card '3Com 3C509B EtherLink III'
isapnp: 2 Plug & Play cards detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
vesafb: framebuffer at 0x81000000, mapped to 0xc880d000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:4797
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x9030-0x9037, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x9038-0x903f, BIOS settings: hdc:pio, hdd:pio
hda: QUANTUM Bigfoot TX8.0AT, ATA DISK drive
hdd: , ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 15698592 sectors (8038 MB) w/69KiB Cache, CHS=977/255/63
Partition check:
 hda: hda1 hda2 < hda5 >
ide: late registration of driver.
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 784k freed
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
hdd: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: ATAPI     Model: CD-ROM DRIVE-24X  Rev: 242N
  Type:   CD-ROM                             ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 20x/20x xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
NCR53c406a: no available ports found
aec671x_detect: 
scsi: <fdomain> Detection failed (no card)
GDT: Storage RAID Controller Driver. Version: 2.05 
GDT: Found 0 PCI Storage RAID Controllers
megaraid: v1.18k (Release Date: Thu Aug 28 10:05:11 EDT 2003)
megaraid: no BIOS enabled.
DC390: 0 adapters found
Failed initialization of WD-7000 SCSI card!
Highpoint HPT370 Softwareraid driver for linux version 0.02
megaraid: v1.18k (Release Date: Thu Aug 28 10:05:11 EDT 2003)
megaraid: no BIOS enabled.
Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found
Guestimating sector 15697567 for superblock
driver for Silicon Image(tm) Medley(tm) hardware version 0.0.1: No raid array found
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19:48:59 Apr 17 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 10 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0x9000, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
cloop: Initializing cloop v2.01
cloop: loaded (max 128 devices)
cloop: /cdrom/KNOPPIX/KNOPPIX: 1908 blocks, 65536 bytes/block, largest block is 65552 bytes.
ISO 9660 Extensions: RRIP_1991A
Freeing unused kernel memory: 140k freed
Real Time Clock Driver v1.10f
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
usbdevfs: remount parameter error
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS01 at 0x02f8 (irq = 3) is a 16550A
parport0: PC-style at 0x378 [PCSPP,EPP]
eth0: 3c5x9 at 0x220, 10baseT port, address  00 60 08 72 3a fc, IRQ 5.
3c509.c:1.19 16Oct2002 becker@scyld.com
http://www.scyld.com/network/3c509.html
ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
ad1848: WSS/SB detected
ad1848: ISAPnP reports 'WSS/SB' at i/o 0x534, irq 11, dma 1, 3
cs4232: set synthio and synthirq to use the wavefront facilities.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 96M
agpgart: Detected Intel 440LX chipset
agpgart: AGP aperture is 64M @ 0xe0000000
Adding Swap: 353388k swap-space (priority -1)
eth0: Setting 3c5x9/3c5x9B half-duplex mode if_port: 0, sw_info: 1321
eth0: Setting Rx mode to 1 addresses.
Registering unionfs 1.0.14
eth0: Setting 3c5x9/3c5x9B half-duplex mode if_port: 0, sw_info: 1321
eth0: Setting Rx mode to 0 addresses.
eth0: Setting Rx mode to 1 addresses.
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hub.c: new USB device 00:07.2-1, assigned address 2
usb-uhci.c: interrupt, status 2, frame# 1793
scsi2 : SCSI emulation for USB Mass Storage devices
  Vendor: Netac     Model: OnlyDisk          Rev: 1.12
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
SCSI device sda: 64000 512-byte hdwr sectors (33 MB)
sda: Write Protect is off
 sda: sda1
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2