[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-25-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #45-Ubuntu SMP Sat Oct 16 19:48:22 UTC 2010 (Ubuntu 2.6.32-25.45-generic 2.6.32.21+drm33.7) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006fff0000 (usable) [ 0.000000] BIOS-e820: 000000006fff0000 - 000000006fff8000 (ACPI data) [ 0.000000] BIOS-e820: 000000006fff8000 - 0000000070000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffee0000 - 00000000fff0ffff (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x6fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FE0000000 write-back [ 0.000000] 2 base 060000000 mask FF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 base 0E0000000 mask FFC000000 write-combining [ 0.000000] 7 base 0E0000000 mask FFC000000 write-combining [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000006fff0000 (usable) [ 0.000000] modified: 000000006fff0000 - 000000006fff8000 (ACPI data) [ 0.000000] modified: 000000006fff8000 - 0000000070000000 (ACPI NVS) [ 0.000000] modified: 00000000fec00000 - 00000000fed00000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000ffee0000 - 00000000fff0ffff (reserved) [ 0.000000] modified: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37869000 - 37fefc53 [ 0.000000] Allocated new RAMDISK: 008e1000 - 01067c53 [ 0.000000] Move RAMDISK from 0000000037869000 - 0000000037fefc52 to 008e1000 - 01067c52 [ 0.000000] ACPI: RSDP 000fa1f0 00014 (v00 AMI ) [ 0.000000] ACPI: RSDT 6fff0000 0002C (v01 AMIINT SiS645XX 00000010 MSFT 0100000B) [ 0.000000] ACPI: FACP 6fff0030 00081 (v01 AMIINT SiS645XX 00000011 MSFT 0100000B) [ 0.000000] ACPI: DSDT 6fff0110 0359A (v01 SiS 648 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS 6fff8000 00040 [ 0.000000] ACPI: APIC 6fff00c0 00050 (v01 AMIINT SiS645XX 00001000 MSFT 0100000B) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 903MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==> [0000100000 - 00008dced8] [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #5 [00008dd000 - 00008e011c] BRK ==> [00008dd000 - 00008e011c] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008e1000 - 0001067c53] NEW RAMDISK ==> [00008e1000 - 0001067c53] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00fb960] fb960 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0006fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0006fff0 [ 0.000000] On node 0 totalpages: 458623 [ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c1069200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1808 pages used for memmap [ 0.000000] HighMem zone: 229602 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 70000000:8ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 455039 [ 0.000000] Kernel command line: root=UUID=13895e1b-d3e4-448d-8117-1d1275a6f860 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 9174400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0006fff0) [ 0.000000] Memory: 1793564k/1834944k available (4680k kernel code, 39976k reserved, 2122k data, 656k init, 925640k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB) [ 0.000000] .data : 0xc0592317 - 0xc07a4e68 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0592317 (4680 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2400.109 MHz processor. [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.21 BogoMIPS (lpj=9600436) [ 0.004035] Security Framework initialized [ 0.004077] AppArmor: AppArmor initialized [ 0.004088] Mount-cache hash table entries: 512 [ 0.004300] Initializing cgroup subsys ns [ 0.004308] Initializing cgroup subsys cpuacct [ 0.004315] Initializing cgroup subsys memory [ 0.004328] Initializing cgroup subsys devices [ 0.004333] Initializing cgroup subsys freezer [ 0.004337] Initializing cgroup subsys net_cls [ 0.004372] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004377] CPU: L2 cache: 512K [ 0.004381] CPU: Hyper-Threading is disabled [ 0.004388] mce: CPU supports 4 MCE banks [ 0.004404] CPU0: Thermal monitoring enabled (TM1) [ 0.004421] Performance Events: no PMU driver, software events only. [ 0.004433] Checking 'hlt' instruction... OK. [ 0.021091] SMP alternatives: switching to UP code [ 0.034157] Freeing SMP alternatives: 19k freed [ 0.034187] ACPI: Core revision 20090903 [ 0.042081] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.042090] ftrace: allocating 21789 entries in 43 pages [ 0.044110] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044384] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.087575] CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07 [ 0.088001] Brought up 1 CPUs [ 0.088001] Total of 1 processors activated (4800.21 BogoMIPS). [ 0.088001] CPU0 attaching NULL sched-domain. [ 0.088001] devtmpfs: initialized [ 0.088001] regulator: core version 0.5 [ 0.088001] Time: 10:32:24 Date: 01/19/11 [ 0.088001] NET: Registered protocol family 16 [ 0.088001] EISA bus registered [ 0.088001] ACPI: bus type pci registered [ 0.088011] PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=2 [ 0.088015] PCI: Using configuration type 1 for base access [ 0.089323] bio: create slab at 0 [ 0.089953] ACPI: EC: Look up EC in DSDT [ 0.096513] ACPI: Interpreter enabled [ 0.096520] ACPI: (supports S0 S3 S4 S5) [ 0.096546] ACPI: Using IOAPIC for interrupt routing [ 0.102274] ACPI: Power Resource [URP1] (off) [ 0.102314] ACPI: Power Resource [URP2] (off) [ 0.102355] ACPI: Power Resource [FDDP] (off) [ 0.102394] ACPI: Power Resource [LPTP] (off) [ 0.102555] ACPI: No dock devices found. [ 0.103157] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.103231] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff] [ 0.103501] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 0.103586] pci 0000:00:02.1: reg 20 io port: [0xc00-0xc1f] [ 0.103693] pci 0000:00:02.5: reg 20 io port: [0xff00-0xff0f] [ 0.103784] pci 0000:00:02.7: reg 10 io port: [0xc400-0xc4ff] [ 0.103797] pci 0000:00:02.7: reg 14 io port: [0xc000-0xc07f] [ 0.103878] pci 0000:00:02.7: supports D1 D2 [ 0.103881] pci 0000:00:02.7: PME# supported from D3hot D3cold [ 0.103889] pci 0000:00:02.7: PME# disabled [ 0.103935] pci 0000:00:03.0: reg 10 32bit mmio: [0xdffec000-0xdffecfff] [ 0.104053] pci 0000:00:03.1: reg 10 32bit mmio: [0xdffed000-0xdffedfff] [ 0.104155] pci 0000:00:03.2: reg 10 32bit mmio: [0xdffee000-0xdffeefff] [ 0.104275] pci 0000:00:03.3: reg 10 32bit mmio: [0xdffef000-0xdffeffff] [ 0.104364] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.104371] pci 0000:00:03.3: PME# disabled [ 0.104455] pci 0000:00:08.0: reg 10 io port: [0xdc00-0xdc0f] [ 0.104468] pci 0000:00:08.0: reg 14 io port: [0xd800-0xd80f] [ 0.104480] pci 0000:00:08.0: reg 18 io port: [0xd400-0xd40f] [ 0.104493] pci 0000:00:08.0: reg 1c io port: [0xd000-0xd00f] [ 0.104506] pci 0000:00:08.0: reg 20 io port: [0xcc00-0xcc1f] [ 0.104518] pci 0000:00:08.0: reg 24 io port: [0xc800-0xc8ff] [ 0.104531] pci 0000:00:08.0: reg 30 32bit mmio pref: [0xdfff0000-0xdfffffff] [ 0.104630] pci 0000:00:09.0: reg 10 32bit mmio: [0xdffeb800-0xdffebfff] [ 0.104643] pci 0000:00:09.0: reg 14 io port: [0xbc00-0xbc7f] [ 0.104725] pci 0000:00:09.0: supports D2 [ 0.104728] pci 0000:00:09.0: PME# supported from D2 D3hot D3cold [ 0.104735] pci 0000:00:09.0: PME# disabled [ 0.104801] pci 0000:00:0b.0: reg 10 32bit mmio: [0xdffd0000-0xdffdffff] [ 0.104813] pci 0000:00:0b.0: reg 14 io port: [0xb800-0xb807] [ 0.104893] pci 0000:00:0b.0: PME# supported from D3hot D3cold [ 0.104900] pci 0000:00:0b.0: PME# disabled [ 0.104972] pci 0000:00:0f.0: reg 10 io port: [0xb400-0xb4ff] [ 0.104985] pci 0000:00:0f.0: reg 14 32bit mmio: [0xdffeb700-0xdffeb7ff] [ 0.105035] pci 0000:00:0f.0: reg 30 32bit mmio pref: [0xdffc0000-0xdffcffff] [ 0.105071] pci 0000:00:0f.0: supports D1 D2 [ 0.105074] pci 0000:00:0f.0: PME# supported from D1 D2 D3hot D3cold [ 0.105081] pci 0000:00:0f.0: PME# disabled [ 0.105192] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff] [ 0.105202] pci 0000:01:00.0: reg 14 io port: [0x7800-0x78ff] [ 0.105211] pci 0000:01:00.0: reg 18 32bit mmio: [0xdfef0000-0xdfefffff] [ 0.105239] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xdfec0000-0xdfedffff] [ 0.105272] pci 0000:01:00.0: supports D1 D2 [ 0.105338] pci 0000:00:01.0: bridge io port: [0x7000-0x7fff] [ 0.105346] pci 0000:00:01.0: bridge 32bit mmio: [0xdfd00000-0xdfefffff] [ 0.105353] pci 0000:00:01.0: bridge 32bit mmio pref: [0xbfa00000-0xdfbfffff] [ 0.105369] pci_bus 0000:00: on NUMA node 0 [ 0.105375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.109554] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) [ 0.109695] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.109835] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15) [ 0.109973] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 *12 14 15) [ 0.110111] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11 12 14 15) [ 0.110249] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 *12 14 15) [ 0.110396] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15) [ 0.110539] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 12 14 15) [ 0.110698] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.110702] vgaarb: loaded [ 0.110879] SCSI subsystem initialized [ 0.110977] libata version 3.00 loaded. [ 0.111085] usbcore: registered new interface driver usbfs [ 0.111105] usbcore: registered new interface driver hub [ 0.111141] usbcore: registered new device driver usb [ 0.111330] ACPI: WMI: Mapper loaded [ 0.111334] PCI: Using ACPI for IRQ routing [ 0.111595] NetLabel: Initializing [ 0.111599] NetLabel: domain hash size = 128 [ 0.111601] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.111623] NetLabel: unlabeled traffic allowed by default [ 0.111692] Switching to clocksource tsc [ 0.111997] AppArmor: AppArmor Filesystem Enabled [ 0.111997] pnp: PnP ACPI init [ 0.111997] ACPI: bus type pnp registered [ 0.114703] pnp: PnP ACPI: found 13 devices [ 0.114707] ACPI: ACPI bus type pnp unregistered [ 0.114713] PnPBIOS: Disabled by ACPI PNP [ 0.114731] system 00:01: ioport range 0x290-0x297 has been reserved [ 0.114736] system 00:01: ioport range 0x480-0x48f has been reserved [ 0.114740] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.114744] system 00:01: ioport range 0xc00-0xc1f has been reserved [ 0.114748] system 00:01: ioport range 0x3f0-0x3f1 has been reserved [ 0.114754] system 00:01: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.149539] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.149545] pci 0000:00:01.0: IO window: 0x7000-0x7fff [ 0.149555] pci 0000:00:01.0: MEM window: 0xdfd00000-0xdfefffff [ 0.149563] pci 0000:00:01.0: PREFETCH window: 0xbfa00000-0xdfbfffff [ 0.149590] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.149593] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.149597] pci_bus 0000:01: resource 0 io: [0x7000-0x7fff] [ 0.149601] pci_bus 0000:01: resource 1 mem: [0xdfd00000-0xdfefffff] [ 0.149605] pci_bus 0000:01: resource 2 pref mem [0xbfa00000-0xdfbfffff] [ 0.149656] NET: Registered protocol family 2 [ 0.149787] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.150283] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.151375] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.152098] TCP: Hash tables configured (established 131072 bind 65536) [ 0.152103] TCP reno registered [ 0.152346] NET: Registered protocol family 1 [ 0.152450] pci 0000:01:00.0: Boot video device [ 0.152694] cpufreq-nforce2: No nForce2 chipset. [ 0.152736] Scanning for low memory corruption every 60 seconds [ 0.152882] audit: initializing netlink socket (disabled) [ 0.152899] type=2000 audit(1295433144.152:1): initialized [ 0.162219] Trying to unpack rootfs image as initramfs... [ 0.172690] highmem bounce pool size: 64 pages [ 0.172701] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.178628] VFS: Disk quotas dquot_6.5.2 [ 0.178717] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.179564] fuse init (API version 7.13) [ 0.179696] msgmni has been set to 1697 [ 0.184409] alg: No test for stdrng (krng) [ 0.184546] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.184551] io scheduler noop registered [ 0.184554] io scheduler anticipatory registered [ 0.184556] io scheduler deadline registered [ 0.184617] io scheduler cfq registered (default) [ 0.184769] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.184803] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.184932] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.184938] ACPI: Power Button [PWRB] [ 0.185010] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.185014] ACPI: Power Button [PWRF] [ 0.185238] processor LNXCPU:00: registered as cooling_device0 [ 0.189638] isapnp: Scanning for PnP cards... [ 0.200609] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.200728] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.200842] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.201274] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.201436] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.202860] brd: module loaded [ 0.203503] loop: module loaded [ 0.203639] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.203820] pata_sis 0000:00:02.5: version 0.5.2 [ 0.247633] scsi0 : pata_sis [ 0.252422] scsi1 : pata_sis [ 0.253440] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 0.253445] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 0.253991] Fixed MDIO Bus: probed [ 0.254046] PPP generic driver version 2.4.2 [ 0.254141] tun: Universal TUN/TAP device driver, 1.6 [ 0.254144] tun: (C) 1999-2004 Max Krasnyansky [ 0.254273] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.254311] alloc irq_desc for 23 on node -1 [ 0.254315] alloc kstat_irqs on node -1 [ 0.254324] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.254349] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 0.254394] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 0.254447] ehci_hcd 0000:00:03.3: cache line size of 128 is not supported [ 0.254466] ehci_hcd 0000:00:03.3: irq 23, io mem 0xdffef000 [ 0.264294] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 0.264484] usb usb1: configuration #1 chosen from 1 choice [ 0.264528] hub 1-0:1.0: USB hub found [ 0.264544] hub 1-0:1.0: 6 ports detected [ 0.264633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.264668] alloc irq_desc for 20 on node -1 [ 0.264671] alloc kstat_irqs on node -1 [ 0.264680] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.264705] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 0.264761] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 0.264793] ohci_hcd 0000:00:03.0: irq 20, io mem 0xdffec000 [ 0.342318] usb usb2: configuration #1 chosen from 1 choice [ 0.342363] hub 2-0:1.0: USB hub found [ 0.342381] hub 2-0:1.0: 2 ports detected [ 0.342455] alloc irq_desc for 21 on node -1 [ 0.342459] alloc kstat_irqs on node -1 [ 0.342469] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.342494] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 0.342550] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 0.342582] ohci_hcd 0000:00:03.1: irq 21, io mem 0xdffed000 [ 0.430029] usb usb3: configuration #1 chosen from 1 choice [ 0.430075] hub 3-0:1.0: USB hub found [ 0.430093] hub 3-0:1.0: 2 ports detected [ 0.430168] alloc irq_desc for 22 on node -1 [ 0.430172] alloc kstat_irqs on node -1 [ 0.430182] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 0.430207] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 0.430261] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 [ 0.430292] ohci_hcd 0000:00:03.2: irq 22, io mem 0xdffee000 [ 0.522482] usb usb4: configuration #1 chosen from 1 choice [ 0.522528] hub 4-0:1.0: USB hub found [ 0.522545] hub 4-0:1.0: 2 ports detected [ 0.522624] uhci_hcd: USB Universal Host Controller Interface driver [ 0.522755] PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1 [ 0.522759] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.522922] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.523133] mice: PS/2 mouse device common for all mice [ 0.527051] rtc_cmos 00:03: RTC can wake from S4 [ 0.527167] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.527198] rtc0: alarms up to one month, 114 bytes nvram [ 0.527384] device-mapper: uevent: version 1.0.3 [ 0.527562] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.528136] device-mapper: multipath: version 1.1.0 loaded [ 0.528141] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.529092] EISA: Probing bus 0 at eisa.0 [ 0.529126] Cannot allocate resource for EISA slot 7 [ 0.529132] EISA: Detected 0 cards. [ 0.532109] cpuidle: using governor ladder [ 0.532114] cpuidle: using governor menu [ 0.532783] TCP cubic registered [ 0.532968] NET: Registered protocol family 10 [ 0.533542] lo: Disabled Privacy Extensions [ 0.533962] NET: Registered protocol family 17 [ 0.534042] Using IPI No-Shortcut mode [ 0.534187] PM: Resume from disk failed. [ 0.534204] registered taskstats version 1 [ 0.534552] Magic number: 11:931:527 [ 0.534652] rtc_cmos 00:03: setting system clock to 2011-01-19 10:32:25 UTC (1295433145) [ 0.534657] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.534659] EDD information not available. [ 0.547663] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.636669] ata1.01: ATA-6: ST380022A, 3.33, max UDMA/100 [ 0.636675] ata1.01: 156301488 sectors, multi 16: LBA [ 0.653356] ata1.01: configured for UDMA/100 [ 0.753534] Freeing initrd memory: 7707k freed [ 0.853098] isapnp: No Plug & Play device found [ 0.853343] scsi 0:0:1:0: Direct-Access ATA ST380022A 3.33 PQ: 0 ANSI: 5 [ 0.853605] sd 0:0:1:0: Attached scsi generic sg0 type 0 [ 0.853872] sd 0:0:1:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 0.853940] sd 0:0:1:0: [sda] Write Protect is off [ 0.853944] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 0.853979] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.854188] sda: sda1 [ 0.865017] sd 0:0:1:0: [sda] Attached SCSI disk [ 0.908285] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 1.016969] ata2.00: ATAPI: JLMS XJ-HD166S, DIS3, max UDMA/33 [ 1.017016] ata2.01: ATAPI: _NEC DVD+RW ND-1100A, 1.80, max UDMA/33 [ 1.017585] ata2.00: configured for UDMA/33 [ 1.032655] ata2.01: configured for UDMA/33 [ 1.033369] scsi 1:0:0:0: CD-ROM JLMS XJ-HD166S DIS3 PQ: 0 ANSI: 5 [ 1.034993] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.034998] Uniform CD-ROM driver Revision: 3.20 [ 1.035132] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.035215] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.037249] scsi 1:0:1:0: CD-ROM _NEC DVD+RW ND-1100A 1.80 PQ: 0 ANSI: 5 [ 1.040655] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.040776] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.040848] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 1.040917] Freeing unused kernel memory: 656k freed [ 1.041786] Write protecting the kernel text: 4684k [ 1.041820] Write protecting the kernel read-only data: 1840k [ 1.074592] udev: starting version 151 [ 1.119196] usb 2-2: configuration #1 chosen from 1 choice [ 1.408299] usbcore: registered new interface driver hiddev [ 1.415381] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input4 [ 1.415534] generic-usb 0003:046D:C046.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:03.0-2/input0 [ 1.415570] usbcore: registered new interface driver usbhid [ 1.415575] usbhid: v2.6:USB HID core driver [ 1.429717] Floppy drive(s): fd0 is 1.44M [ 1.437464] sata_via 0000:00:08.0: version 2.4 [ 1.437494] alloc irq_desc for 19 on node -1 [ 1.437497] alloc kstat_irqs on node -1 [ 1.437507] sata_via 0000:00:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.437570] sata_via 0000:00:08.0: routed to hard irq line 12 [ 1.440594] scsi2 : sata_via [ 1.446628] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.450331] FDC 0 is a post-1991 82077 [ 1.450379] scsi3 : sata_via [ 1.450678] scsi4 : sata_via [ 1.450745] ata3: SATA max UDMA/133 port i16@0xdc00 bmdma 0xcc00 irq 19 [ 1.450750] ata4: SATA max UDMA/133 port i16@0xd800 bmdma 0xcc08 irq 19 [ 1.450754] ata5: PATA max UDMA/133 port i16@0xd400 bmdma 0xcc10 irq 19 [ 1.452334] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.452813] alloc irq_desc for 16 on node -1 [ 1.452817] alloc kstat_irqs on node -1 [ 1.452828] ohci1394 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.510042] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[dffeb800-dffebfff] Max Packet=[2048] IR/IT contexts=[8/8] [ 1.772056] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1.780359] ata3.00: ATA-7: SAMSUNG SP2504C, VT100-59, max UDMA7 [ 1.780364] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.788374] ata3.00: configured for UDMA/133 [ 1.788532] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 [ 1.788770] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 1.789162] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.789229] sd 2:0:0:0: [sdb] Write Protect is off [ 1.789234] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.789268] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.789477] sdb: sdb1 sdb2 < sdb5 > [ 1.833328] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.118835] ata4: SATA link down (SStatus 0 SControl 310) [ 2.290947] 8139too Fast Ethernet driver 0.9.28 [ 2.291016] alloc irq_desc for 18 on node -1 [ 2.291019] alloc kstat_irqs on node -1 [ 2.291030] 8139too 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.292336] eth0: RealTek RTL8139 at 0xb400, 00:10:dc:f8:53:3e, IRQ 18 [ 2.449345] EXT3-fs: INFO: recovery required on readonly filesystem. [ 2.449352] EXT3-fs: write access will be enabled during recovery. [ 2.788266] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0005ce00140033c4] [ 4.103443] kjournald starting. Commit interval 5 seconds [ 4.103471] EXT3-fs: sdb1: orphan cleanup on readonly fs [ 4.103480] ext3_orphan_cleanup: deleting unreferenced inode 5668882 [ 4.129528] ext3_orphan_cleanup: deleting unreferenced inode 5669135 [ 4.129545] ext3_orphan_cleanup: deleting unreferenced inode 5669130 [ 4.129561] ext3_orphan_cleanup: deleting unreferenced inode 5669184 [ 4.129576] ext3_orphan_cleanup: deleting unreferenced inode 5669110 [ 4.135764] ext3_orphan_cleanup: deleting unreferenced inode 5669132 [ 4.135779] ext3_orphan_cleanup: deleting unreferenced inode 5669180 [ 4.142221] ext3_orphan_cleanup: deleting unreferenced inode 5669128 [ 4.146573] ext3_orphan_cleanup: deleting unreferenced inode 5668898 [ 4.153701] EXT3-fs: sdb1: 9 orphan inodes deleted [ 4.153705] EXT3-fs: recovery complete. [ 4.212808] EXT3-fs: mounted filesystem with ordered data mode. [ 6.532564] Adding 5317472k swap on /dev/sdb5. Priority:-1 extents:1 across:5317472k [ 7.036641] EXT3 FS on sdb1, internal journal [ 7.232164] udev: starting version 151 [ 9.467063] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.620879] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00 [ 9.620888] ACPI: resource 0000:00:02.1 [0xc00-0xc1f] conflicts with ACPI region SMRG [0xc00-0xc1f] [ 9.620892] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.744836] Linux agpgart interface v0.103 [ 9.755957] gameport: NS558 PnP Gameport is pnp00:0b/gameport0, io 0x200, speed 745kHz [ 9.790360] agpgart-sis 0000:00:00.0: SiS chipset [1039/0648] [ 9.827018] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe0000000 [ 9.851033] parport_pc 00:0a: reported by Plug and Play ACPI [ 9.851065] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 9.882938] lp: driver loaded but no devices found [ 9.929832] ppdev: user-space parallel port driver [ 9.948279] lp0: using parport0 (interrupt-driven). [ 10.209354] [drm] Initialized drm 1.1.0 20060810 [ 10.422134] [drm] radeon defaulting to kernel modesetting. [ 10.422140] [drm] radeon kernel modesetting enabled. [ 10.422211] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.426248] [drm] radeon: Initializing kernel modesetting. [ 10.426349] [drm] register mmio base: 0xDFEF0000 [ 10.426352] [drm] register mmio size: 65536 [ 10.427423] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 10.427444] agpgart-sis 0000:00:00.0: AGP 3.0 bridge [ 10.427472] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 16x mode [ 10.427478] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover [ 10.440102] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 16x mode [ 10.440110] [drm] radeon: VRAM 128M [ 10.440113] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [ 10.440116] [drm] radeon: GTT 64M [ 10.440118] [drm] radeon: GTT from 0xE0000000 to 0xE3FFFFFF [ 10.440152] [drm] radeon: irq initialized. [ 10.440264] [drm] Detected VRAM RAM=128M, BAR=256M [ 10.440269] [drm] RAM width 128bits DDR [ 10.440596] [TTM] Zone kernel: Available graphics memory: 438630 kiB. [ 10.440601] [TTM] Zone highmem: Available graphics memory: 901450 kiB. [ 10.440627] [drm] radeon: 128M of VRAM memory ready [ 10.440631] [drm] radeon: 64M of GTT memory ready. [ 10.440873] [drm] radeon: cp idle (0x02000603) [ 10.440966] [drm] Loading R200 Microcode [ 10.441378] platform radeon_cp.0: firmware: requesting radeon/R200_cp.bin [ 10.950176] [drm] radeon: ring at 0x00000000E0000000 [ 10.950198] [drm] ring test succeeded in 0 usecs [ 10.956940] [drm] radeon: ib pool ready. [ 10.957057] [drm] ib test succeeded in 0 usecs [ 10.958634] [drm] Radeon Display Connectors [ 10.958640] [drm] Connector 0: [ 10.958642] [drm] VGA [ 10.958646] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 10.958649] [drm] Encoders: [ 10.958651] [drm] CRT1: INTERNAL_DAC1 [ 10.998909] type=1505 audit(1295429555.961:2): operation="profile_load" pid=446 name="/sbin/dhclient3" [ 10.999585] type=1505 audit(1295429555.961:3): operation="profile_load" pid=446 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.999962] type=1505 audit(1295429555.961:4): operation="profile_load" pid=446 name="/usr/lib/connman/scripts/dhclient-script" [ 11.000208] type=1505 audit(1295429555.965:5): operation="profile_replace" pid=477 name="/sbin/dhclient3" [ 11.000901] type=1505 audit(1295429555.965:6): operation="profile_replace" pid=477 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.001288] type=1505 audit(1295429555.965:7): operation="profile_replace" pid=477 name="/usr/lib/connman/scripts/dhclient-script" [ 11.056532] radeon 0000:01:00.0: The number of extension(32) is over max (4), actually read number (4) [ 11.424264] radeon 0000:01:00.0: The number of extension(32) is over max (4), actually read number (4) [ 11.845406] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 12.014602] [drm] fb mappable at 0xC0040000 [ 12.014607] [drm] vram apper at 0xC0000000 [ 12.014609] [drm] size 5242880 [ 12.014612] [drm] fb depth is 24 [ 12.014614] [drm] pitch is 5120 [ 12.029457] type=1505 audit(1295429556.993:8): operation="profile_load" pid=571 name="/usr/sbin/ntpd" [ 12.031954] type=1505 audit(1295429556.993:9): operation="profile_replace" pid=570 name="/usr/sbin/ntpd" [ 12.041735] fb0: radeondrmfb frame buffer device [ 12.041740] registered panic notifier [ 12.041750] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 12.085352] vga16fb: initializing [ 12.085362] vga16fb: mapped to 0xc00a0000 [ 12.085369] vga16fb: not registering due to another framebuffer present [ 12.172035] intel8x0_measure_ac97_clock: measured 55545 usecs (2672 samples) [ 12.172040] intel8x0: clocking to 48000 [ 12.853249] Console: switching to colour frame buffer device 160x64 [ 15.407249] radeon 0000:01:00.0: The number of extension(32) is over max (4), actually read number (4) [ 16.289710] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 17.080848] type=1505 audit(1295429562.045:10): operation="profile_load" pid=833 name="/usr/share/gdm/guest-session/Xsession" [ 17.087797] type=1505 audit(1295429562.049:11): operation="profile_replace" pid=836 name="/sbin/dhclient3" [ 17.088783] type=1505 audit(1295429562.053:12): operation="profile_replace" pid=836 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 17.089178] type=1505 audit(1295429562.053:13): operation="profile_replace" pid=836 name="/usr/lib/connman/scripts/dhclient-script" [ 17.290307] type=1505 audit(1295429562.253:14): operation="profile_load" pid=837 name="/usr/bin/evince" [ 17.301197] type=1505 audit(1295429562.265:15): operation="profile_load" pid=837 name="/usr/bin/evince-previewer" [ 17.306775] type=1505 audit(1295429562.269:16): operation="profile_load" pid=837 name="/usr/bin/evince-thumbnailer" [ 17.586623] type=1505 audit(1295429562.549:17): operation="profile_load" pid=848 name="/usr/lib/firefox-3.6.13/firefox-*bin" [ 17.591091] type=1505 audit(1295429562.553:18): operation="profile_load" pid=848 name="/usr/lib/firefox-3.6.13/firefox-*bin//firefox_java" [ 17.593261] type=1505 audit(1295429562.557:19): operation="profile_load" pid=848 name="/usr/lib/firefox-3.6.13/firefox-*bin//firefox_openjdk" [ 18.864448] radeon 0000:01:00.0: The number of extension(32) is over max (4), actually read number (4) [ 19.236158] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 19.236163] apm: overridden by ACPI. [ 19.246785] radeon 0000:01:00.0: The number of extension(32) is over max (4), actually read number (4)