[   20.593034] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   22.452980] usb 3-1: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[   24.067025] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   28.768025] eth0: no IPv6 routers present
[   80.040058] ata6.00: qc timeout (cmd 0xa0)
[   80.040071] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   80.040078] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[   80.040092] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[   80.040094]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[   80.040097] ata6.00: status: { DRDY ERR }
[   80.040136] ata6: soft resetting link
[   80.488592] ata6.00: configured for UDMA/33
[   83.996951] ata6.01: configured for UDMA/33
[   83.997703] ata6: EH complete
[  106.844148] ata6.00: qc timeout (cmd 0xa0)
[  106.844162] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  106.844169] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  106.844183] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  106.844184]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  106.844188] ata6.00: status: { DRDY ERR }
[  106.844227] ata6: soft resetting link
[  110.580577] ata6.00: configured for UDMA/33
[  112.832532] ata6.01: configured for UDMA/33
[  112.833316] ata6: EH complete
[  114.832012] ------------[ cut here ]------------
[  114.832029] WARNING: at /build/buildd/linux-2.6.35/net/sched/sch_generic.c:258 dev_watchdog+0x1fd/0x210()
[  114.832033] Hardware name: EP058AA-ABU SR1705UK GB610
[  114.832036] NETDEV WATCHDOG: eth0 (8139too): transmit queue 0 timed out
[  114.832038] Modules linked in: binfmt_misc snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep radeon snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event ttm snd_seq drm_kms_helper snd_timer ppdev snd_seq_device usblp drm snd psmouse parport_pc ati_agp soundcore i2c_algo_bit serio_raw i2c_piix4 snd_page_alloc shpchp agpgart lp parport 8139too firewire_ohci 8139cp firewire_core floppy mii crc_itu_t pata_atiixp sata_sil
[  114.832080] Pid: 0, comm: swapper Not tainted 2.6.35-23-generic #41-Ubuntu
[  114.832083] Call Trace:
[  114.832093]  [<c014acf2>] warn_slowpath_common+0x72/0xa0
[  114.832098]  [<c050ec4d>] ? dev_watchdog+0x1fd/0x210
[  114.832102]  [<c050ec4d>] ? dev_watchdog+0x1fd/0x210
[  114.832107]  [<c014adc3>] warn_slowpath_fmt+0x33/0x40
[  114.832111]  [<c050ec4d>] dev_watchdog+0x1fd/0x210
[  114.832117]  [<c016c1c1>] ? sched_clock_cpu+0x131/0x190
[  114.832124]  [<c016934b>] ? hrtimer_forward+0x16b/0x1b0
[  114.832129]  [<c050ea50>] ? dev_watchdog+0x0/0x210
[  114.832133]  [<c0157ebf>] call_timer_fn+0x2f/0xf0
[  114.832139]  [<c01223ab>] ? lapic_next_event+0x1b/0x20
[  114.832144]  [<c017449b>] ? clockevents_program_event+0x8b/0x140
[  114.832148]  [<c0159104>] run_timer_softirq+0x104/0x210
[  114.832153]  [<c01758a2>] ? tick_dev_program_event+0x42/0x150
[  114.832157]  [<c050ea50>] ? dev_watchdog+0x0/0x210
[  114.832162]  [<c015131c>] __do_softirq+0x9c/0x1b0
[  114.832166]  [<c016c2ce>] ? sched_clock_tick+0x5e/0x90
[  114.832170]  [<c0151475>] do_softirq+0x45/0x50
[  114.832174]  [<c01515e5>] irq_exit+0x65/0x70
[  114.832180]  [<c05d007b>] smp_apic_timer_interrupt+0x5b/0x8a
[  114.832185]  [<c05c9e85>] apic_timer_interrupt+0x31/0x38
[  114.832191]  [<c010a826>] ? mwait_idle+0x56/0xb0
[  114.832196]  [<c0101fcc>] cpu_idle+0x8c/0xd0
[  114.832201]  [<c05b2d21>] rest_init+0x71/0x80
[  114.832208]  [<c081981a>] start_kernel+0x36e/0x374
[  114.832212]  [<c08199dd>] ? pass_all_bootoptions+0x0/0xa
[  114.832217]  [<c08190d7>] i386_start_kernel+0xd7/0xdf
[  114.832220] ---[ end trace d370d90902d369a3 ]---
[  117.840104] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  134.000046] ata6.00: qc timeout (cmd 0xa0)
[  134.000059] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  134.000065] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  134.000080] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  134.000081]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  134.000085] ata6.00: status: { DRDY ERR }
[  134.000124] ata6: soft resetting link
[  138.056647] ata6.00: configured for UDMA/33
[  139.824510] ata6.01: configured for UDMA/33
[  139.825348] ata6: EH complete
[  159.860046] ata6.00: qc timeout (cmd 0xa0)
[  159.860059] ata6.00: limiting speed to UDMA/25:PIO4
[  159.860065] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  159.860071] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  159.860085] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  159.860087]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  159.860091] ata6.00: status: { DRDY ERR }
[  159.860129] ata6: soft resetting link
[  165.024069] ata6.01: qc timeout (cmd 0x27)
[  165.024077] ata6.01: failed to read native max address (err_mask=0x4)
[  165.024082] ata6.01: revalidation failed (errno=-5)
[  165.024123] ata6: soft resetting link
[  170.936607] ata6.00: configured for UDMA/25
[  173.575307] ata6.01: configured for UDMA/33
[  173.576434] ata6: EH complete
[  181.892045] ata6.00: qc timeout (cmd 0xa0)
[  181.892059] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  181.892065] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  181.892080] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  181.892081]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  181.892085] ata6.00: status: { DRDY ERR }
[  181.892124] ata6: soft resetting link
[  187.056064] ata6.01: qc timeout (cmd 0x27)
[  187.056071] ata6.01: failed to read native max address (err_mask=0x4)
[  187.056076] ata6.01: revalidation failed (errno=-5)
[  187.056117] ata6: soft resetting link
[  189.100768] ata6.00: configured for UDMA/25
[  192.832488] ata6.01: configured for UDMA/33
[  192.833264] ata6: EH complete
[  203.892045] ata6.00: qc timeout (cmd 0xa0)
[  203.892057] ata6.00: limiting speed to PIO4
[  203.892063] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  203.892070] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  203.892084] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  203.892086]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  203.892089] ata6.00: status: { DRDY ERR }
[  203.892128] ata6: soft resetting link
[  209.056063] ata6.01: qc timeout (cmd 0x27)
[  209.056070] ata6.01: failed to read native max address (err_mask=0x4)
[  209.056075] ata6.01: revalidation failed (errno=-5)
[  209.056116] ata6: soft resetting link
[  214.104581] ata6.00: configured for PIO4
[  214.150593] ata6.01: configured for UDMA/33
[  214.158892] ata6: EH complete
[  224.896046] ata6.00: qc timeout (cmd 0xa0)
[  224.896058] ata6.00: limiting speed to PIO3
[  224.896064] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  224.896071] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  224.896085] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  224.896087]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  224.896091] ata6.00: status: { DRDY ERR }
[  224.896129] ata6: soft resetting link
[  229.100596] ata6.00: configured for PIO3
[  230.832482] ata6.01: configured for UDMA/33
[  230.833575] ata6: EH complete
[  235.884045] ata6.00: qc timeout (cmd 0xa0)
[  235.884057] ata6.00: limiting speed to PIO0
[  235.884063] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  235.884070] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  235.884085] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  235.884087]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  235.884090] ata6.00: status: { DRDY ERR }
[  235.884129] ata6: soft resetting link
[  241.048063] ata6.01: qc timeout (cmd 0x27)
[  241.048071] ata6.01: failed to read native max address (err_mask=0x4)
[  241.048076] ata6.01: revalidation failed (errno=-5)
[  241.048117] ata6: soft resetting link
[  243.840115] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  243.944632] ata6.00: configured for PIO0
[  244.000400] ata6.01: configured for UDMA/33
[  246.832417] ata6: EH complete
[  251.888048] ata6.00: qc timeout (cmd 0xa0)
[  251.888062] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  251.888069] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  251.888083] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  251.888085]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  251.888089] ata6.00: status: { DRDY ERR }
[  251.888127] ata6: soft resetting link
[  255.464720] ata6.00: configured for PIO0
[  255.479439] lo: Disabled Privacy Extensions
[  255.695924] ata6.01: configured for UDMA/33
[  255.802423] ata6: EH complete
[  274.064063] ata6.00: qc timeout (cmd 0xa0)
[  274.064077] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  274.064083] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  274.064098] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  274.064099]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  274.064103] ata6.00: status: { DRDY ERR }
[  274.064141] ata6: soft resetting link
[  279.104651] ata6.00: configured for PIO0
[  279.152690] ata6.01: configured for UDMA/33
[  279.160997] ata6: EH complete
[  316.028054] ata6.00: qc timeout (cmd 0xa0)
[  316.028068] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  316.028074] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  316.028088] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  316.028090]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  316.028094] ata6.00: status: { DRDY ERR }
[  316.028132] ata6: soft resetting link
[  319.100641] ata6.00: configured for PIO0
[  319.163903] ata6.01: configured for UDMA/33
[  319.170524] ata6: EH complete
[  334.000583] ata6.00: qc timeout (cmd 0xa0)
[  334.000596] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  334.000603] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  334.000617] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  334.000619]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  334.000622] ata6.00: status: { DRDY ERR }
[  334.000658] ata6: soft resetting link
[  334.312632] ata6.00: configured for PIO0
[  339.328075] ata6.01: qc timeout (cmd 0x27)
[  339.328082] ata6.01: failed to read native max address (err_mask=0x4)
[  339.328087] ata6.01: revalidation failed (errno=-5)
[  339.328129] ata6: soft resetting link
[  345.112641] ata6.00: configured for PIO0
[  349.000575] ata6.01: configured for UDMA/33
[  349.001346] ata6: EH complete
[  370.016176] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  378.072056] ata6.00: qc timeout (cmd 0xa0)
[  378.072071] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  378.072078] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  378.072093] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  378.072094]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  378.072098] ata6.00: status: { DRDY ERR }
[  378.072137] ata6: soft resetting link
[  379.104644] ata6.00: configured for PIO0
[  381.088109] ata6.01: configured for UDMA/33
[  382.016457] ata6: EH complete
[  394.016117] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  399.084047] ata6.00: qc timeout (cmd 0xa0)
[  399.084061] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  399.084068] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  399.084082] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  399.084083]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  399.084087] ata6.00: status: { DRDY ERR }
[  399.084125] ata6: soft resetting link
[  404.104643] ata6.00: configured for PIO0
[  404.155754] ata6.01: configured for UDMA/33
[  404.164100] ata6: EH complete
[  415.064047] ata6.00: qc timeout (cmd 0xa0)
[  415.064061] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  415.064067] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  415.064081] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  415.064083]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  415.064087] ata6.00: status: { DRDY ERR }
[  415.064125] ata6: soft resetting link
[  418.016144] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  418.120636] ata6.00: configured for PIO0
[  419.004341] ata6.01: configured for UDMA/33
[  421.008547] ata6: EH complete
[  426.068048] ata6.00: qc timeout (cmd 0xa0)
[  426.068063] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  426.068071] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  426.068085] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  426.068087]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  426.068090] ata6.00: status: { DRDY ERR }
[  426.068129] ata6: soft resetting link
[  428.540644] ata6.00: configured for PIO0
[  432.016519] ata6.01: configured for UDMA/33
[  432.017388] ata6: EH complete
[  472.016188] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  581.156061] ata6.00: qc timeout (cmd 0xa0)
[  581.156075] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  581.156082] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  581.156096] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  581.156098]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  581.156101] ata6.00: status: { DRDY ERR }
[  581.156140] ata6: soft resetting link
[  584.108647] ata6.00: configured for PIO0
[  587.008624] ata6.01: configured for UDMA/33
[  587.009384] ata6: EH complete
[  610.016148] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  611.044058] ata6.00: qc timeout (cmd 0xa0)
[  611.044072] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  611.044079] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  611.044093] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  611.044094]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  611.044098] ata6.00: status: { DRDY ERR }
[  611.044137] ata6: soft resetting link
[  613.364680] ata6.00: configured for PIO0
[  614.004506] ata6.01: configured for UDMA/33
[  614.005325] ata6: EH complete
[  640.016206] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  640.028057] ata6.00: qc timeout (cmd 0xa0)
[  640.028069] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  640.028076] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  640.028090] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  640.028092]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  640.028096] ata6.00: status: { DRDY ERR }
[  640.028134] ata6: soft resetting link
[  644.104662] ata6.00: configured for PIO0
[  649.000573] ata6.01: configured for UDMA/33
[  649.001392] ata6: EH complete
[  652.016120] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  663.060057] ata6.00: qc timeout (cmd 0xa0)
[  663.060072] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  663.060078] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  663.060092] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  663.060094]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  663.060098] ata6.00: status: { DRDY ERR }
[  663.060136] ata6: soft resetting link
[  664.016130] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  664.120649] ata6.00: configured for PIO0
[  664.482127] ata6.01: configured for UDMA/33
[  664.528503] ata6: EH complete
[  695.036057] ata6.00: qc timeout (cmd 0xa0)
[  695.036072] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  695.036078] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  695.036092] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  695.036094]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  695.036098] ata6.00: status: { DRDY ERR }
[  695.036136] ata6: soft resetting link
[  698.120637] ata6.00: configured for PIO0
[  699.004390] ata6.01: configured for UDMA/33
[  699.854151] ata6: EH complete
[  700.016219] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  721.880058] ata6.00: qc timeout (cmd 0xa0)
[  721.880072] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  721.880078] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  721.880092] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  721.880094]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  721.880098] ata6.00: status: { DRDY ERR }
[  721.880136] ata6: soft resetting link
[  724.804713] ata6.00: configured for PIO0
[  724.881144] ata6.01: configured for UDMA/33
[  724.981690] ata6: EH complete
[  778.016147] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  788.068055] ata6.00: qc timeout (cmd 0xa0)
[  788.068069] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  788.068076] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  788.068090] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  788.068091]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  788.068095] ata6.00: status: { DRDY ERR }
[  788.068134] ata6: soft resetting link
[  789.108669] ata6.00: configured for PIO0
[  790.016205] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  790.016336] ata6.01: configured for UDMA/33
[  794.000489] ata6: EH complete
[  799.068046] ata6.00: qc timeout (cmd 0xa0)
[  799.068062] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  799.068069] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  799.068083] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  799.068084]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  799.068088] ata6.00: status: { DRDY ERR }
[  799.068126] ata6: soft resetting link
[  801.181359] ata6.00: configured for PIO0
[  802.016125] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  802.016247] ata6.01: configured for UDMA/33
[  805.008581] ata6: EH complete
[  819.000142] ata6.00: qc timeout (cmd 0xa0)
[  819.000156] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  819.000163] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  819.000177] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  819.000178]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  819.000182] ata6.00: status: { DRDY ERR }
[  819.000220] ata6: soft resetting link
[  820.016202] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  820.120650] ata6.00: configured for PIO0
[  825.008575] ata6.01: configured for UDMA/33
[  825.009333] ata6: EH complete
[  894.048047] ata6.00: qc timeout (cmd 0xa0)
[  894.048062] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  894.048068] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  894.048082] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  894.048084]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  894.048087] ata6.00: status: { DRDY ERR }
[  894.048127] ata6: soft resetting link
[  896.940648] ata6.00: configured for PIO0
[  898.015303] ata6.01: configured for UDMA/33
[  898.016456] ata6: EH complete
[  919.012054] ata6.00: qc timeout (cmd 0xa0)
[  919.012068] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  919.012075] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  919.012089] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  919.012090]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  919.012094] ata6.00: status: { DRDY ERR }
[  919.012133] ata6: soft resetting link
[  921.140646] ata6.00: configured for PIO0
[  922.016132] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  922.016264] ata6.01: configured for UDMA/33
[  924.000479] ata6: EH complete
[  934.016194] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  945.060054] ata6.00: qc timeout (cmd 0xa0)
[  945.060068] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  945.060074] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  945.060088] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  945.060090]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  945.060094] ata6.00: status: { DRDY ERR }
[  945.060132] ata6: soft resetting link
[  946.396645] ata6.00: configured for PIO0
[  951.412056] ata6.01: qc timeout (cmd 0x27)
[  951.412064] ata6.01: failed to read native max address (err_mask=0x4)
[  951.412069] ata6.01: revalidation failed (errno=-5)
[  951.412111] ata6: soft resetting link
[  951.756718] ata6.00: configured for PIO0
[  952.029432] ata6.01: configured for UDMA/33
[  952.030296] ata6: EH complete
[  971.056079] ata6.00: qc timeout (cmd 0xa0)
[  971.056094] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  971.056100] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[  971.056115] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  971.056116]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[  971.056120] ata6.00: status: { DRDY ERR }
[  971.056158] ata6: soft resetting link
[  971.640662] ata6.00: configured for PIO0
[  972.870286] ata6.01: configured for UDMA/33
[  972.871231] ata6: EH complete
[ 1019.068057] ata6.00: qc timeout (cmd 0xa0)
[ 1019.068071] ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1019.068077] sr 5:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[ 1019.068092] ata6.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 1019.068093]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
[ 1019.068097] ata6.00: status: { DRDY ERR }
[ 1019.068135] ata6: soft resetting link
[ 1023.112636] ata6.00: configured for PIO0
[ 1024.004306] ata6.01: configured for UDMA/33
[ 1024.768615] ata6: EH complete