[   22.311512] /dev/vmmon[1271]: Module vmmon: registered with major=10 minor=165
[   22.311522] /dev/vmmon[1271]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0 anyDisabled=1
[   22.311526] /dev/vmmon[1271]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0 anyDisabled=1
[   22.311528] /dev/vmmon[1271]: Module vmmon: initialized
[   22.318565] /dev/vmci[1279]: VMCI: Driver initialized.
[   22.318676] /dev/vmci[1279]: Module vmci: registered with major=10 minor=55
[   22.318678] /dev/vmci[1279]: Module vmci: initialized
[   22.384111] Skipping EDID probe due to cached edid
[   22.390366] /dev/vmnet: open called by PID 1338 (vmnet-bridge)
[   22.390371] /dev/vmnet: hub 0 does not exist, allocating memory.
[   22.390389] /dev/vmnet: port on hub 0 successfully opened
[   22.390401] bridge-eth0: up
[   22.390404] bridge-eth0: attached
[   22.408600] Skipping EDID probe due to cached edid
[   22.500959] psmouse serio2: ID: 10 00 64
[   22.880087] Skipping EDID probe due to cached edid
[   22.904041] Skipping EDID probe due to cached edid
[   22.952553] Skipping EDID probe due to cached edid
[   22.980088] Skipping EDID probe due to cached edid
[   23.039295] /dev/vmnet: open called by PID 1381 (vmnet-dhcpd)
[   23.039303] /dev/vmnet: hub 1 does not exist, allocating memory.
[   23.039322] /dev/vmnet: port on hub 1 successfully opened
[   23.040681] /dev/vmnet: open called by PID 1383 (vmnet-netifup)
[   23.040687] /dev/vmnet: port on hub 1 successfully opened
[   23.099291] /dev/vmnet: open called by PID 1386 (vmnet-dhcpd)
[   23.099304] /dev/vmnet: hub 8 does not exist, allocating memory.
[   23.099323] /dev/vmnet: port on hub 8 successfully opened
[   23.102066] /dev/vmnet: open called by PID 1393 (vmnet-natd)
[   23.102072] /dev/vmnet: port on hub 8 successfully opened
[   23.103499] /dev/vmnet: open called by PID 1394 (vmnet-netifup)
[   23.103505] /dev/vmnet: port on hub 8 successfully opened
[   25.028478] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[   25.447948] e1000e 0000:00:19.0: eth0: changing MTU from 1500 to 1400
[   25.536733] bridge-eth0: disabling the bridge
[   25.536801] e1000e 0000:00:19.0: eth0: Reset adapter
[   25.548036] bridge-eth0: down
[   25.548041] bridge-eth0: detached
[   26.166213] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   26.406429] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
[   27.564923] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[   27.564926] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[   27.565174] /dev/vmnet: open called by PID 1338 (vmnet-bridge)
[   27.565181] /dev/vmnet: hub 0 does not exist, allocating memory.
[   27.565199] /dev/vmnet: port on hub 0 successfully opened
[   27.565208] bridge-eth0: up
[   27.565210] bridge-eth0: attached
[   32.720013] eth0: no IPv6 routers present
[   33.136056] vmnet8: no IPv6 routers present
[   33.624058] vmnet1: no IPv6 routers present
[   34.308064] /dev/vmmon[0]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445450781778564451 new 18445450781776955660 attempts 1
[ 3688.264612] Skipping EDID probe due to cached edid
[ 3688.288118] Skipping EDID probe due to cached edid
[ 3688.308598] Skipping EDID probe due to cached edid
[ 3688.340150] Skipping EDID probe due to cached edid
[ 3689.052038] Skipping EDID probe due to cached edid
[ 3693.692056] Skipping EDID probe due to cached edid
[ 3737.000316] e1000e: eth0 NIC Link is Down
[ 3737.005198] bridge-eth0: disabling the bridge
[ 3737.020068] bridge-eth0: down
[ 3737.020080] bridge-eth0: detached
[ 4271.292784] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4271.348200] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4271.348836] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4288.397023] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 4288.397033] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 4288.397540] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4288.397844] /dev/vmnet: open called by PID 1338 (vmnet-bridge)
[ 4288.397864] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 4288.397920] /dev/vmnet: port on hub 0 successfully opened
[ 4288.397944] bridge-eth0: up
[ 4288.397951] bridge-eth0: attached
[ 4296.016234] e1000e: eth0 NIC Link is Down
[ 4296.025179] bridge-eth0: disabling the bridge
[ 4296.026772] bridge-eth0: down
[ 4296.026783] bridge-eth0: detached
[ 4298.656066] eth0: no IPv6 routers present
[ 4897.317031] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 4897.317041] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 4897.317678] /dev/vmnet: open called by PID 1338 (vmnet-bridge)
[ 4897.317699] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 4897.317754] /dev/vmnet: port on hub 0 successfully opened
[ 4897.317779] bridge-eth0: up
[ 4897.317786] bridge-eth0: attached
[ 4987.700973] bridge-eth0: disabling the bridge on dev down
[ 4987.712057] bridge-eth0: down
[ 4987.712089] bridge-eth0: detached
[ 4987.844459] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4987.900171] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4987.900718] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4990.033023] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 4990.033033] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 4990.033519] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 4990.033788] /dev/vmnet: open called by PID 1338 (vmnet-bridge)
[ 4990.033809] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 4990.033864] /dev/vmnet: port on hub 0 successfully opened
[ 4990.033888] bridge-eth0: up
[ 4990.033895] bridge-eth0: attached
[ 5000.768545] eth0: no IPv6 routers present
[ 5061.652177] e1000e: eth0 NIC Link is Down
[ 5061.652877] bridge-eth0: disabling the bridge
[ 5061.668579] bridge-eth0: down
[ 5061.668589] bridge-eth0: detached
[ 5496.572984] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 5496.572995] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 5496.573671] /dev/vmnet: open called by PID 1338 (vmnet-bridge)
[ 5496.573695] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 5496.573750] /dev/vmnet: port on hub 0 successfully opened
[ 5496.573777] bridge-eth0: up
[ 5496.573784] bridge-eth0: attached
[ 5512.324843] bridge-eth0: disabling the bridge on dev down
[ 5512.336074] bridge-eth0: down
[ 5512.336124] bridge-eth0: detached
[ 5512.476467] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 5512.532153] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 5512.532699] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5514.481025] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 5514.481035] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 5514.481523] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5514.481789] /dev/vmnet: open called by PID 1338 (vmnet-bridge)
[ 5514.481809] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 5514.481864] /dev/vmnet: port on hub 0 successfully opened
[ 5514.481888] bridge-eth0: up
[ 5514.481895] bridge-eth0: attached
[ 5524.656564] eth0: no IPv6 routers present
[ 5997.825039] bridge-eth0: disabling the bridge on dev down
[ 5997.832096] bridge-eth0: down
[ 5997.832130] bridge-eth0: detached
[ 5997.928373] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 5997.984191] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 5997.984755] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5999.565479] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 5999.565490] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 5999.565980] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5999.566285] /dev/vmnet: open called by PID 1338 (vmnet-bridge)
[ 5999.566307] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 5999.566362] /dev/vmnet: port on hub 0 successfully opened
[ 5999.566387] bridge-eth0: up
[ 5999.566394] bridge-eth0: attached
[ 6009.800072] eth0: no IPv6 routers present
[ 6096.829361] bridge-eth0: disabling the bridge on dev down
[ 6096.840561] bridge-eth0: down
[ 6096.840587] bridge-eth0: detached
[ 6096.972526] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 6097.028206] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 6097.028833] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6098.609477] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 6098.609487] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 6098.609975] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6098.610193] /dev/vmnet: open called by PID 1338 (vmnet-bridge)
[ 6098.610213] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 6098.610269] /dev/vmnet: port on hub 0 successfully opened
[ 6098.610294] bridge-eth0: up
[ 6098.610301] bridge-eth0: attached
[ 6108.888093] eth0: no IPv6 routers present
[ 6166.486627] bridge-eth0: disabling the bridge on dev down
[ 6166.496573] bridge-eth0: down
[ 6166.496638] bridge-eth0: detached
[ 6166.640420] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 6166.696165] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 6166.696716] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6168.289030] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 6168.289041] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 6168.289530] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6168.289818] /dev/vmnet: open called by PID 1338 (vmnet-bridge)
[ 6168.289840] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 6168.289905] /dev/vmnet: port on hub 0 successfully opened
[ 6168.289930] bridge-eth0: up
[ 6168.289937] bridge-eth0: attached
[ 6179.120072] eth0: no IPv6 routers present
[ 6255.133365] bridge-eth0: disabling the bridge on dev down
[ 6255.144566] bridge-eth0: down
[ 6255.144616] bridge-eth0: detached
[ 6255.276629] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 6255.332174] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 6255.332735] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6257.237027] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 6257.237037] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 6257.237534] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6257.237803] /dev/vmnet: open called by PID 1338 (vmnet-bridge)
[ 6257.237823] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 6257.237878] /dev/vmnet: port on hub 0 successfully opened
[ 6257.237902] bridge-eth0: up
[ 6257.237909] bridge-eth0: attached
[ 6267.744109] eth0: no IPv6 routers present