[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-25-preempt (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #44-Ubuntu SMP PREEMPT Fri Sep 17 22:21:55 UTC 2010 (Ubuntu 2.6.32-25.44-preempt 2.6.32.21+drm33.7) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-preempt root=UUID=d8e32d8e-d8c3-464c-97c1-6c7f0dd97f64 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c000 (usable) [ 0.000000] BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bbc50000 (usable) [ 0.000000] BIOS-e820: 00000000bbc50000 - 00000000bbc93000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bbc93000 - 00000000bbe16000 (reserved) [ 0.000000] BIOS-e820: 00000000bbe16000 - 00000000bbe17000 (usable) [ 0.000000] BIOS-e820: 00000000bbe17000 - 00000000bbe18000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bbe18000 - 00000000bbe22000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bbe22000 - 00000000bbe2b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bbe2b000 - 00000000bbe49000 (reserved) [ 0.000000] BIOS-e820: 00000000bbe49000 - 00000000bbe8c000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bbe8c000 - 00000000bc000000 (usable) [ 0.000000] BIOS-e820: 00000000bc000000 - 00000000bf800000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI 2.6 present. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbc000 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009c000 (usable) [ 0.000000] modified: 000000000009c000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bbc50000 (usable) [ 0.000000] modified: 00000000bbc50000 - 00000000bbc93000 (ACPI NVS) [ 0.000000] modified: 00000000bbc93000 - 00000000bbe16000 (reserved) [ 0.000000] modified: 00000000bbe16000 - 00000000bbe17000 (usable) [ 0.000000] modified: 00000000bbe17000 - 00000000bbe18000 (ACPI NVS) [ 0.000000] modified: 00000000bbe18000 - 00000000bbe22000 (ACPI data) [ 0.000000] modified: 00000000bbe22000 - 00000000bbe2b000 (ACPI NVS) [ 0.000000] modified: 00000000bbe2b000 - 00000000bbe49000 (reserved) [ 0.000000] modified: 00000000bbe49000 - 00000000bbe8c000 (ACPI NVS) [ 0.000000] modified: 00000000bbe8c000 - 00000000bc000000 (usable) [ 0.000000] modified: 00000000bc000000 - 00000000bf800000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bc000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00bc000000 page 2M [ 0.000000] kernel direct mapping tables up to bc000000 @ 8000-c000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ a000-10000 [ 0.000000] RAMDISK: 37680000 - 37fef80e [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 INTEL) [ 0.000000] ACPI: XSDT 00000000bbe20e18 00054 (v01 INTEL DH55HC 01072009 MSFT 00010013) [ 0.000000] ACPI: FACP 00000000bbe1fd98 000F4 (v04 INTEL DH55HC 01072009 MSFT 00010013) [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369) [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - BBE28E40/00000000BBE28D40, using 32 (20090903/tbfadt-486) [ 0.000000] ACPI: DSDT 00000000bbe18018 069C3 (v01 INTEL DH55HC 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bbe28e40 00040 [ 0.000000] ACPI: APIC 00000000bbe1ff18 000CC (v02 INTEL DH55HC 01072009 MSFT 00010013) [ 0.000000] ACPI: SSDT 00000000bbe1fc18 0014E (v01 INTEL DH55HC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG 00000000bbe21f18 0003C (v01 INTEL DH55HC 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bbe21e98 00038 (v01 INTEL DH55HC 01072009 AMI. 00000003) [ 0.000000] ACPI: ASF! 00000000bbe20c18 000A0 (v32 INTEL DH55HC 00000001 TFSM 000F4240) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000000000b000 - 000000000000ffff] [ 0.000000] bootmap [0000000000010000 - 0000000000037fff] pages 28 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a46a64] TEXT DATA BSS ==> [0001000000 - 0001a46a64] [ 0.000000] #3 [0037680000 - 0037fef80e] RAMDISK ==> [0037680000 - 0037fef80e] [ 0.000000] #4 [000009c000 - 0000100000] BIOS reserved ==> [000009c000 - 0000100000] [ 0.000000] #5 [0001a47000 - 0001a471b5] BRK ==> [0001a47000 - 0001a471b5] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000] [ 0.000000] found SMP MP-table at [ffff8800000fcd70] fcd70 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x000bbc50 [ 0.000000] 0: 0x000bbe16 -> 0x000bbe17 [ 0.000000] 0: 0x000bbe8c -> 0x000bc000 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1031516 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 106 pages reserved [ 0.000000] DMA zone: 3829 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 751101 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bbc50000 - 00000000bbc93000 [ 0.000000] PM: Registered nosave memory: 00000000bbc93000 - 00000000bbe16000 [ 0.000000] PM: Registered nosave memory: 00000000bbe17000 - 00000000bbe18000 [ 0.000000] PM: Registered nosave memory: 00000000bbe18000 - 00000000bbe22000 [ 0.000000] PM: Registered nosave memory: 00000000bbe22000 - 00000000bbe2b000 [ 0.000000] PM: Registered nosave memory: 00000000bbe2b000 - 00000000bbe49000 [ 0.000000] PM: Registered nosave memory: 00000000bbe49000 - 00000000bbe8c000 [ 0.000000] PM: Registered nosave memory: 00000000bc000000 - 00000000bf800000 [ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at bf800000 (gap: bf800000:3f51c000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u131072 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1013490 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-preempt root=UUID=d8e32d8e-d8c3-464c-97c1-6c7f0dd97f64 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 3980412k/5242880k available (5565k kernel code, 1116816k absent, 145652k reserved, 2980k data, 828k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:536 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] alloc irq_desc for 24 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] alloc irq_desc for 25 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] alloc irq_desc for 26 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] alloc irq_desc for 27 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] alloc irq_desc for 28 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] HPET: 8 timers in total, 5 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 2659.819 MHz processor. [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5319.63 BogoMIPS (lpj=2659819) [ 0.000018] Security Framework initialized [ 0.000032] AppArmor: AppArmor initialized [ 0.000325] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001507] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002027] Mount-cache hash table entries: 256 [ 0.002121] Initializing cgroup subsys ns [ 0.002124] Initializing cgroup subsys cpuacct [ 0.002128] Initializing cgroup subsys memory [ 0.002132] Initializing cgroup subsys devices [ 0.002134] Initializing cgroup subsys freezer [ 0.002136] Initializing cgroup subsys net_cls [ 0.002150] CPU: Physical Processor ID: 0 [ 0.002151] CPU: Processor Core ID: 0 [ 0.002154] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.002156] CPU: L2 cache: 256K [ 0.002157] CPU: L3 cache: 8192K [ 0.002160] CPU 0/0x0 -> Node 0 [ 0.002162] mce: CPU supports 9 MCE banks [ 0.002171] CPU0: Thermal monitoring enabled (TM1) [ 0.002174] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8 [ 0.002183] using mwait in idle threads. [ 0.002184] Performance Events: Nehalem/Corei7 events, Intel PMU driver. [ 0.002189] ... version: 3 [ 0.002190] ... bit width: 48 [ 0.002191] ... generic registers: 4 [ 0.002192] ... value mask: 0000ffffffffffff [ 0.002194] ... max period: 000000007fffffff [ 0.002195] ... fixed-purpose events: 3 [ 0.002196] ... event mask: 000000070000000f [ 0.002996] ACPI: Core revision 20090903 [ 0.010404] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.010407] ftrace: allocating 22804 entries in 90 pages [ 0.017226] Setting APIC routing to physical flat [ 0.017540] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.027521] CPU0: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz stepping 05 [ 0.134241] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.144964] Initializing CPU#1 [ 0.205039] CPU: Physical Processor ID: 0 [ 0.205041] CPU: Processor Core ID: 1 [ 0.205044] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.205046] CPU: L2 cache: 256K [ 0.205047] CPU: L3 cache: 8192K [ 0.205050] CPU 1/0x2 -> Node 0 [ 0.205060] CPU1: Thermal monitoring enabled (TM1) [ 0.205063] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.205114] CPU1: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz stepping 05 [ 0.205121] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.227988] Booting processor 2 APIC 0x4 ip 0x6000 [ 0.238328] Initializing CPU#2 [ 0.298787] CPU: Physical Processor ID: 0 [ 0.298789] CPU: Processor Core ID: 2 [ 0.298791] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.298794] CPU: L2 cache: 256K [ 0.298795] CPU: L3 cache: 8192K [ 0.298798] CPU 2/0x4 -> Node 0 [ 0.298807] CPU2: Thermal monitoring enabled (TM1) [ 0.298811] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.298856] CPU2: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz stepping 05 [ 0.298863] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.321737] Booting processor 3 APIC 0x6 ip 0x6000 [ 0.332075] Initializing CPU#3 [ 0.392535] CPU: Physical Processor ID: 0 [ 0.392537] CPU: Processor Core ID: 3 [ 0.392540] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.392542] CPU: L2 cache: 256K [ 0.392543] CPU: L3 cache: 8192K [ 0.392546] CPU 3/0x6 -> Node 0 [ 0.392556] CPU3: Thermal monitoring enabled (TM1) [ 0.392559] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 0.392606] CPU3: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz stepping 05 [ 0.392612] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.412577] Brought up 4 CPUs [ 0.412580] Total of 4 processors activated (21276.87 BogoMIPS). [ 0.413853] CPU0 attaching sched-domain: [ 0.413856] domain 0: span 0-3 level MC [ 0.413858] groups: 0 1 2 3 [ 0.413863] CPU1 attaching sched-domain: [ 0.413865] domain 0: span 0-3 level MC [ 0.413867] groups: 1 2 3 0 [ 0.413871] CPU2 attaching sched-domain: [ 0.413872] domain 0: span 0-3 level MC [ 0.413874] groups: 2 3 0 1 [ 0.413877] CPU3 attaching sched-domain: [ 0.413879] domain 0: span 0-3 level MC [ 0.413881] groups: 3 0 1 2 [ 0.414058] devtmpfs: initialized [ 0.414327] regulator: core version 0.5 [ 0.414351] Time: 12:26:17 Date: 11/18/10 [ 0.414385] NET: Registered protocol family 16 [ 0.414476] ACPI: bus type pci registered [ 0.414537] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.414539] PCI: Not using MMCONFIG. [ 0.414540] PCI: Using configuration type 1 for base access [ 0.415118] Trying to unpack rootfs image as initramfs... [ 0.415160] bio: create slab at 0 [ 0.415923] ACPI: EC: Look up EC in DSDT [ 0.417833] ACPI: Executed 1 blocks of module-level executable AML code [ 0.423561] ACPI: Interpreter enabled [ 0.423563] ACPI: (supports S0 S1 S3 S4 S5) [ 0.423582] ACPI: Using IOAPIC for interrupt routing [ 0.423623] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.423704] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.425457] PCI: Using MMCONFIG at e0000000 - e3ffffff [ 0.425629] ACPI: BIOS _OSI(Linux) query ignored [ 0.432497] ACPI: No dock devices found. [ 0.432692] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.432798] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.432801] pci 0000:00:03.0: PME# disabled [ 0.433059] pci 0000:00:16.0: reg 10 64bit mmio: [0xfb229000-0xfb22900f] [ 0.433112] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.433115] pci 0000:00:16.0: PME# disabled [ 0.433153] pci 0000:00:16.2: reg 10 io port: [0xf150-0xf157] [ 0.433159] pci 0000:00:16.2: reg 14 io port: [0xf140-0xf143] [ 0.433164] pci 0000:00:16.2: reg 18 io port: [0xf130-0xf137] [ 0.433170] pci 0000:00:16.2: reg 1c io port: [0xf120-0xf123] [ 0.433176] pci 0000:00:16.2: reg 20 io port: [0xf110-0xf11f] [ 0.433257] pci 0000:00:16.3: reg 10 io port: [0xf100-0xf107] [ 0.433263] pci 0000:00:16.3: reg 14 32bit mmio: [0xfb228000-0xfb228fff] [ 0.433354] pci 0000:00:19.0: reg 10 32bit mmio: [0xfb200000-0xfb21ffff] [ 0.433360] pci 0000:00:19.0: reg 14 32bit mmio: [0xfb227000-0xfb227fff] [ 0.433365] pci 0000:00:19.0: reg 18 io port: [0xf020-0xf03f] [ 0.433401] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.433404] pci 0000:00:19.0: PME# disabled [ 0.433450] pci 0000:00:1a.0: reg 10 32bit mmio: [0xfb226000-0xfb2263ff] [ 0.433502] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.433505] pci 0000:00:1a.0: PME# disabled [ 0.433544] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfb220000-0xfb223fff] [ 0.433583] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.433587] pci 0000:00:1b.0: PME# disabled [ 0.433645] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.433648] pci 0000:00:1c.0: PME# disabled [ 0.433707] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.433710] pci 0000:00:1c.4: PME# disabled [ 0.433761] pci 0000:00:1d.0: reg 10 32bit mmio: [0xfb225000-0xfb2253ff] [ 0.433811] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.433815] pci 0000:00:1d.0: PME# disabled [ 0.433977] pci 0000:00:1f.2: reg 10 io port: [0xf0f0-0xf0f7] [ 0.433982] pci 0000:00:1f.2: reg 14 io port: [0xf0e0-0xf0e3] [ 0.433987] pci 0000:00:1f.2: reg 18 io port: [0xf0d0-0xf0d7] [ 0.433992] pci 0000:00:1f.2: reg 1c io port: [0xf0c0-0xf0c3] [ 0.433997] pci 0000:00:1f.2: reg 20 io port: [0xf0b0-0xf0bf] [ 0.434001] pci 0000:00:1f.2: reg 24 io port: [0xf0a0-0xf0af] [ 0.434043] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb224000-0xfb2240ff] [ 0.434055] pci 0000:00:1f.3: reg 20 io port: [0xf000-0xf01f] [ 0.434094] pci 0000:00:1f.5: reg 10 io port: [0xf090-0xf097] [ 0.434099] pci 0000:00:1f.5: reg 14 io port: [0xf080-0xf083] [ 0.434104] pci 0000:00:1f.5: reg 18 io port: [0xf070-0xf077] [ 0.434109] pci 0000:00:1f.5: reg 1c io port: [0xf060-0xf063] [ 0.434114] pci 0000:00:1f.5: reg 20 io port: [0xf050-0xf05f] [ 0.434118] pci 0000:00:1f.5: reg 24 io port: [0xf040-0xf04f] [ 0.434172] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.434180] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xc0000000-0xdfffffff] [ 0.434188] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.434193] pci 0000:01:00.0: reg 24 io port: [0xe000-0xe07f] [ 0.434198] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfb000000-0xfb07ffff] [ 0.434245] pci 0000:00:03.0: bridge io port: [0xe000-0xefff] [ 0.434248] pci 0000:00:03.0: bridge 32bit mmio: [0xf8000000-0xfb0fffff] [ 0.434252] pci 0000:00:03.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff] [ 0.434357] pci 0000:04:00.0: reg 10 io port: [0xd000-0xd0ff] [ 0.434363] pci 0000:04:00.0: reg 14 32bit mmio: [0xfb110000-0xfb1100ff] [ 0.434402] pci 0000:04:00.0: supports D1 D2 [ 0.434404] pci 0000:04:00.0: PME# supported from D1 D2 D3hot [ 0.434407] pci 0000:04:00.0: PME# disabled [ 0.434439] pci 0000:04:02.0: reg 10 32bit mmio: [0xfb100000-0xfb10ffff] [ 0.434445] pci 0000:04:02.0: reg 14 io port: [0xd100-0xd107] [ 0.434482] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold [ 0.434485] pci 0000:04:02.0: PME# disabled [ 0.434526] pci 0000:00:1e.0: transparent bridge [ 0.434529] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff] [ 0.434532] pci 0000:00:1e.0: bridge 32bit mmio: [0xfb100000-0xfb1fffff] [ 0.434553] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.434753] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.434805] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.434857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT] [ 0.442630] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.442722] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.442812] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.442903] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.442992] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.443082] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.443172] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.443262] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 11 12 14 15) [ 0.443358] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.443361] vgaarb: loaded [ 0.443438] SCSI subsystem initialized [ 0.443518] libata version 3.00 loaded. [ 0.443573] usbcore: registered new interface driver usbfs [ 0.443581] usbcore: registered new interface driver hub [ 0.443598] usbcore: registered new device driver usb [ 0.443680] ACPI: WMI: Mapper loaded [ 0.443681] PCI: Using ACPI for IRQ routing [ 0.443814] NetLabel: Initializing [ 0.443815] NetLabel: domain hash size = 128 [ 0.443816] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.443825] NetLabel: unlabeled traffic allowed by default [ 0.443854] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 [ 0.443860] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.446403] hpet: hpet2 irq 24 for MSI [ 0.446500] hpet: hpet3 irq 25 for MSI [ 0.447493] hpet: hpet4 irq 26 for MSI [ 0.448489] hpet: hpet5 irq 27 for MSI [ 0.448508] Switching to clocksource tsc [ 0.449883] AppArmor: AppArmor Filesystem Enabled [ 0.449891] pnp: PnP ACPI init [ 0.449900] ACPI: bus type pnp registered [ 0.451616] pnp: PnP ACPI: found 11 devices [ 0.451618] ACPI: ACPI bus type pnp unregistered [ 0.451626] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.451628] system 00:01: iomem range 0xe0000000-0xe3ffffff has been reserved [ 0.451630] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved [ 0.451632] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.451634] system 00:01: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.451642] system 00:06: ioport range 0x4d0-0x4d1 has been reserved [ 0.451646] system 00:09: ioport range 0x400-0x47f has been reserved [ 0.451648] system 00:09: ioport range 0x1180-0x119f has been reserved [ 0.451650] system 00:09: ioport range 0x500-0x57f has been reserved [ 0.451652] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.451654] system 00:09: iomem range 0xfec00000-0xfecfffff could not be reserved [ 0.451656] system 00:09: iomem range 0xfed08000-0xfed08fff has been reserved [ 0.451658] system 00:09: iomem range 0xff000000-0xffffffff has been reserved [ 0.456305] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01 [ 0.456308] pci 0000:00:03.0: IO window: 0xe000-0xefff [ 0.456312] pci 0000:00:03.0: MEM window: 0xf8000000-0xfb0fffff [ 0.456315] pci 0000:00:03.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff [ 0.456319] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.456320] pci 0000:00:1c.0: IO window: disabled [ 0.456324] pci 0000:00:1c.0: MEM window: disabled [ 0.456327] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.456332] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.456333] pci 0000:00:1c.4: IO window: disabled [ 0.456337] pci 0000:00:1c.4: MEM window: disabled [ 0.456340] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.456345] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.456347] pci 0000:00:1e.0: IO window: 0xd000-0xdfff [ 0.456351] pci 0000:00:1e.0: MEM window: 0xfb100000-0xfb1fffff [ 0.456355] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.456366] pci 0000:00:03.0: setting latency timer to 64 [ 0.456374] alloc irq_desc for 17 on node -1 [ 0.456376] alloc kstat_irqs on node -1 [ 0.456380] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.456383] pci 0000:00:1c.0: setting latency timer to 64 [ 0.456390] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.456393] pci 0000:00:1c.4: setting latency timer to 64 [ 0.456398] pci 0000:00:1e.0: setting latency timer to 64 [ 0.456402] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.456404] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.456405] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.456407] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfb0fffff] [ 0.456409] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xdfffffff] [ 0.456411] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] [ 0.456413] pci_bus 0000:04: resource 1 mem: [0xfb100000-0xfb1fffff] [ 0.456414] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.456416] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.456441] NET: Registered protocol family 2 [ 0.456591] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.457440] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.459818] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.460107] TCP: Hash tables configured (established 524288 bind 65536) [ 0.460109] TCP reno registered [ 0.460219] NET: Registered protocol family 1 [ 0.502461] pci 0000:01:00.0: Boot video device [ 0.502704] Scanning for low memory corruption every 60 seconds [ 0.502791] audit: initializing netlink socket (disabled) [ 0.502799] type=2000 audit(1290083176.375:1): initialized [ 0.506594] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.507685] VFS: Disk quotas dquot_6.5.2 [ 0.507728] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.508199] fuse init (API version 7.13) [ 0.508266] msgmni has been set to 7774 [ 0.508443] alg: No test for stdrng (krng) [ 0.508484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.508486] io scheduler noop registered [ 0.508487] io scheduler anticipatory registered [ 0.508489] io scheduler deadline registered [ 0.508515] io scheduler cfq registered (default) [ 0.508627] alloc irq_desc for 29 on node -1 [ 0.508628] alloc kstat_irqs on node -1 [ 0.508635] pcieport 0000:00:03.0: irq 29 for MSI/MSI-X [ 0.508641] pcieport 0000:00:03.0: setting latency timer to 64 [ 0.508724] alloc irq_desc for 30 on node -1 [ 0.508726] alloc kstat_irqs on node -1 [ 0.508732] pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X [ 0.508739] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.508819] alloc irq_desc for 31 on node -1 [ 0.508820] alloc kstat_irqs on node -1 [ 0.508826] pcieport 0000:00:1c.4: irq 31 for MSI/MSI-X [ 0.508832] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.509057] aer 0000:00:03.0:pcie02: service driver aer loaded [ 0.509064] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.509081] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.509148] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.509154] ACPI: Power Button [PWRB] [ 0.509186] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.509188] ACPI: Power Button [PWRF] [ 0.509710] ACPI: SSDT 00000000bbe17c18 0038C (v01 AMI IST 00000001 MSFT 03000001) [ 0.510225] Monitor-Mwait will be used to enter C-2 state [ 0.510243] Monitor-Mwait will be used to enter C-3 state [ 0.510274] processor LNXCPU:00: registered as cooling_device0 [ 0.511455] processor LNXCPU:01: registered as cooling_device1 [ 0.512480] processor LNXCPU:02: registered as cooling_device2 [ 0.512967] processor LNXCPU:03: registered as cooling_device3 [ 0.515751] Linux agpgart interface v0.103 [ 0.515774] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.515996] serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.516070] 0000:00:16.3: ttyS0 at I/O 0xf100 (irq = 17) is a 16550A [ 0.516782] brd: module loaded [ 0.517111] loop: module loaded [ 0.517167] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.517226] ata_piix 0000:00:1f.2: version 2.13 [ 0.517234] alloc irq_desc for 19 on node -1 [ 0.517236] alloc kstat_irqs on node -1 [ 0.517239] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.517243] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.517273] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.517313] scsi0 : ata_piix [ 0.517363] scsi1 : ata_piix [ 0.518511] ata1: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0b0 irq 19 [ 0.518516] ata2: SATA max UDMA/133 cmd 0xf0d0 ctl 0xf0c0 bmdma 0xf0b8 irq 19 [ 0.518533] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.518537] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.518567] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.518595] scsi2 : ata_piix [ 0.518633] scsi3 : ata_piix [ 0.519568] ata3: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf050 irq 19 [ 0.519571] ata4: SATA max UDMA/133 cmd 0xf070 ctl 0xf060 bmdma 0xf058 irq 19 [ 0.519615] alloc irq_desc for 18 on node -1 [ 0.519617] alloc kstat_irqs on node -1 [ 0.519621] pata_acpi 0000:00:16.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.519638] pata_acpi 0000:00:16.2: setting latency timer to 64 [ 0.519648] pata_acpi 0000:00:16.2: PCI INT C disabled [ 0.519844] Fixed MDIO Bus: probed [ 0.519865] PPP generic driver version 2.4.2 [ 0.519890] tun: Universal TUN/TAP device driver, 1.6 [ 0.519892] tun: (C) 1999-2004 Max Krasnyansky [ 0.519949] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.519963] alloc irq_desc for 16 on node -1 [ 0.519964] alloc kstat_irqs on node -1 [ 0.519968] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.519981] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.519984] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 0.520011] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.520036] ehci_hcd 0000:00:1a.0: debug port 2 [ 0.523972] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 0.523982] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfb226000 [ 0.533359] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.533430] usb usb1: configuration #1 chosen from 1 choice [ 0.533450] hub 1-0:1.0: USB hub found [ 0.533456] hub 1-0:1.0: 2 ports detected [ 0.533494] alloc irq_desc for 23 on node -1 [ 0.533497] alloc kstat_irqs on node -1 [ 0.533501] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.533511] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.533514] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 0.533537] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.533559] ehci_hcd 0000:00:1d.0: debug port 2 [ 0.537493] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 0.537503] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfb225000 [ 0.547323] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.547379] usb usb2: configuration #1 chosen from 1 choice [ 0.547397] hub 2-0:1.0: USB hub found [ 0.547401] hub 2-0:1.0: 2 ports detected [ 0.547434] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.547444] uhci_hcd: USB Universal Host Controller Interface driver [ 0.547487] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.547489] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.548171] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.548234] mice: PS/2 mouse device common for all mice [ 0.548297] rtc_cmos 00:04: RTC can wake from S4 [ 0.548329] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.548352] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.548440] device-mapper: uevent: version 1.0.3 [ 0.548508] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.548577] device-mapper: multipath: version 1.1.0 loaded [ 0.548579] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.548801] cpuidle: using governor ladder [ 0.548938] cpuidle: using governor menu [ 0.549262] TCP cubic registered [ 0.549379] NET: Registered protocol family 10 [ 0.549809] lo: Disabled Privacy Extensions [ 0.550061] NET: Registered protocol family 17 [ 0.550699] PM: Resume from disk failed. [ 0.550707] registered taskstats version 1 [ 0.551079] Magic number: 2:31:431 [ 0.551133] rtc_cmos 00:04: setting system clock to 2010-11-18 12:26:17 UTC (1290083177) [ 0.551136] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.551137] EDD information not available. [ 0.567177] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.621675] Freeing initrd memory: 9662k freed [ 0.846310] ata4: SATA link down (SStatus 0 SControl 300) [ 0.857004] ata3: SATA link down (SStatus 0 SControl 300) [ 0.859522] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.973623] usb 1-1: configuration #1 chosen from 1 choice [ 0.973701] hub 1-1:1.0: USB hub found [ 0.973809] hub 1-1:1.0: 6 ports detected [ 1.075963] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.179136] usb 2-1: configuration #1 chosen from 1 choice [ 1.179361] hub 2-1:1.0: USB hub found [ 1.179468] hub 2-1:1.0: 6 ports detected [ 1.242699] usb 1-1.3: new low speed USB device using ehci_hcd and address 3 [ 1.257589] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.257600] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.257773] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.257785] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.257795] ata2.01: link offline, clearing class 3 to NONE [ 1.260942] ata2.00: ATAPI: SONY DVD RW DRU-870S, 1.61, max UDMA/100 [ 1.261254] ata1.00: ATA-8: ST3500418AS, CC38, max UDMA/133 [ 1.261256] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.266922] ata2.00: configured for UDMA/100 [ 1.267207] ata1.00: configured for UDMA/133 [ 1.267286] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5 [ 1.267385] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.267389] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.267416] sd 0:0:0:0: [sda] Write Protect is off [ 1.267418] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.267434] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.267564] sda: [ 1.269017] scsi 1:0:0:0: CD-ROM SONY DVD RW DRU-870S 1.61 PQ: 0 ANSI: 5 [ 1.274030] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.274035] Uniform CD-ROM driver Revision: 3.20 [ 1.274164] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.274200] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.275477] sda1 sda2 sda3 < sda5 sda6 > sda4 [ 1.308595] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.308657] Freeing unused kernel memory: 828k freed [ 1.308793] Write protecting the kernel read-only data: 7844k [ 1.320721] udev[117]: starting version 163 [ 1.322894] usb 1-1.3: configuration #1 chosen from 1 choice [ 1.340414] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 1.340417] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 1.340451] alloc irq_desc for 20 on node -1 [ 1.340453] alloc kstat_irqs on node -1 [ 1.340458] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.340465] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.340538] alloc irq_desc for 32 on node -1 [ 1.340540] alloc kstat_irqs on node -1 [ 1.340548] e1000e 0000:00:19.0: irq 32 for MSI/MSI-X [ 1.359880] 8139too Fast Ethernet driver 0.9.28 [ 1.359908] alloc irq_desc for 21 on node -1 [ 1.359910] alloc kstat_irqs on node -1 [ 1.359915] 8139too 0000:04:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.360819] eth0: RealTek RTL8139 at 0xd000, 00:05:5d:4b:0f:47, IRQ 21 [ 1.366742] usbcore: registered new interface driver hiddev [ 1.368720] input: USB+PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input4 [ 1.368773] generic-usb 0003:04F3:0230.0001: input,hidraw0: USB HID v1.11 Mouse [USB+PS/2 Optical Mouse] on usb-0000:00:1a.0-1.3/input0 [ 1.368786] usbcore: registered new interface driver usbhid [ 1.368787] usbhid: v2.6:USB HID core driver [ 1.764429] 0000:00:19.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:27:0e:0b:11:0c [ 1.764431] 0000:00:19.0: eth1: Intel(R) PRO/1000 Network Connection [ 1.764465] 0000:00:19.0: eth1: MAC: 9, PHY: 9, PBA No: ffffff-0ff [ 1.787504] EXT4-fs (sda4): mounted filesystem with ordered data mode [ 13.032643] udev[413]: starting version 163 [ 13.042823] lp: driver loaded but no devices found [ 13.070728] vga16fb: initializing [ 13.070731] vga16fb: mapped to 0xffff8800000a0000 [ 13.070787] fb0: VGA16 VGA frame buffer device [ 13.109107] udev[447]: renamed network interface eth0 to eth0-eth1 [ 13.111950] udev[449]: renamed network interface eth1 to eth0 [ 13.137262] nvidia: module license 'NVIDIA' taints kernel. [ 13.137265] Disabling lock debugging due to kernel taint [ 13.159461] udev[447]: renamed network interface eth0-eth1 to eth1 [ 13.160845] Adding 4882424k swap on /dev/sda6. Priority:-1 extents:1 across:4882424k [ 13.161285] type=1505 audit(1290063390.142:2): operation="profile_load" pid=742 name="/sbin/dhclient3" [ 13.161676] type=1505 audit(1290063390.142:3): operation="profile_load" pid=742 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.161897] type=1505 audit(1290063390.142:4): operation="profile_load" pid=742 name="/usr/lib/connman/scripts/dhclient-script" [ 13.302360] alloc irq_desc for 22 on node -1 [ 13.302363] alloc kstat_irqs on node -1 [ 13.302380] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 13.302444] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 13.344600] hda_codec: ALC888: BIOS auto-probing. [ 13.345951] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 13.425970] Console: switching to colour frame buffer device 80x30 [ 13.495272] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.495278] nvidia 0000:01:00.0: setting latency timer to 64 [ 13.495282] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 13.495347] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.28 Wed Sep 29 09:44:58 PDT 2010 [ 13.740127] type=1505 audit(1290063390.722:5): operation="profile_load" pid=1032 name="/usr/share/gdm/guest-session/Xsession" [ 13.741741] type=1505 audit(1290063390.724:6): operation="profile_replace" pid=1036 name="/sbin/dhclient3" [ 13.742129] type=1505 audit(1290063390.724:7): operation="profile_replace" pid=1036 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.742151] type=1505 audit(1290063390.724:8): operation="profile_load" pid=1079 name="/usr/bin/freshclam" [ 13.742225] type=1505 audit(1290063390.724:9): operation="profile_load" pid=1080 name="/usr/sbin/clamd" [ 13.742342] type=1505 audit(1290063390.724:10): operation="profile_replace" pid=1036 name="/usr/lib/connman/scripts/dhclient-script" [ 13.744248] type=1505 audit(1290063390.726:11): operation="profile_load" pid=1081 name="/usr/lib/cups/backend/cups-pdf" [ 13.798102] ppdev: user-space parallel port driver [ 13.800393] e1000e 0000:00:19.0: irq 32 for MSI/MSI-X [ 13.851177] e1000e 0000:00:19.0: irq 32 for MSI/MSI-X [ 13.851508] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.852461] eth1: link down [ 13.852737] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 15.361590] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX [ 15.361592] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 15.363364] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.855614] CPU0 attaching NULL sched-domain. [ 21.855618] CPU1 attaching NULL sched-domain. [ 21.855620] CPU2 attaching NULL sched-domain. [ 21.855624] CPU3 attaching NULL sched-domain. [ 21.862683] CPU0 attaching sched-domain: [ 21.862686] domain 0: span 0-3 level MC [ 21.862688] groups: 0 1 2 3 [ 21.862691] CPU1 attaching sched-domain: [ 21.862693] domain 0: span 0-3 level MC [ 21.862694] groups: 1 2 3 0 [ 21.862697] CPU2 attaching sched-domain: [ 21.862698] domain 0: span 0-3 level MC [ 21.862700] groups: 2 3 0 1 [ 21.862703] CPU3 attaching sched-domain: [ 21.862704] domain 0: span 0-3 level MC [ 21.862705] groups: 3 0 1 2 [ 26.106530] eth0: no IPv6 routers present [ 129.033675] __ratelimit: 15 callbacks suppressed [ 129.033682] npviewer.bin[2111]: segfault at 418 ip 00000000f6042b66 sp 00000000ffe711e8 error 6 in libflashplayer.so[f5df4000+b2c000]