[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-22-generic (buildd@rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu4) ) #33-Ubuntu SMP Sun Sep 19 20:34:50 UTC 2010 (Ubuntu 2.6.35-22.33-generic 2.6.35.4) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000009fff0000 (usable) [ 0.000000] BIOS-e820: 000000009fff0000 - 000000009fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000009fff3000 - 00000000a0000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000160000000 (usable) [ 0.000000] BIOS-e820: 00000001a0000000 - 00000001b0000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x9fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFE0000000 write-back [ 0.000000] 2 base 0100000000 mask FFC0000000 write-back [ 0.000000] 3 base 0140000000 mask FFE0000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000a0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000009fff0000 (usable) [ 0.000000] modified: 000000009fff0000 - 000000009fff3000 (ACPI NVS) [ 0.000000] modified: 000000009fff3000 - 00000000a0000000 (ACPI data) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000160000000 (usable) [ 0.000000] modified: 00000001a0000000 - 00000001b0000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] found SMP MP-table at [c00f59c0] f59c0 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000 [ 0.000000] RAMDISK: 7f51e000 - 80000000 [ 0.000000] Allocated new RAMDISK: 009a5000 - 0148698f [ 0.000000] Move RAMDISK from 000000007f51e000 - 000000007ffff98e to 009a5000 - 0148698e [ 0.000000] ACPI: RSDP 000f7d70 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 9fff3040 00038 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 9fff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 9fff3180 06677 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 9fff0000 00040 [ 0.000000] ACPI: SSDT 9fff9900 000D6 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: SRAT 9fff9a40 000B8 (v01 AMD HAMMER 00000001 AMD 00000001) [ 0.000000] ACPI: MCFG 9fff9b40 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 9fff9840 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1671MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0009fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0009fff0 [ 0.000000] On node 0 totalpages: 655231 [ 0.000000] free_area_init_node: node 0, pgdat c07ffd40, node_mem_map c1488200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 3344 pages used for memmap [ 0.000000] HighMem zone: 424674 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [16000 - 167ff] [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:40000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36416 r0 d20928 u2097152 [ 0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 650111 [ 0.000000] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 13106560 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Subtract (48 early reservations) [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE [ 0.000000] #2 [0000100000 - 00009a0adc] TEXT DATA BSS [ 0.000000] #3 [00009a1000 - 00009a4159] BRK [ 0.000000] #4 [00000f59d0 - 0000100000] BIOS reserved [ 0.000000] #5 [00000f59c0 - 00000f59d0] MP-table mpf [ 0.000000] #6 [000009f800 - 00000f1400] BIOS reserved [ 0.000000] #7 [00000f1530 - 00000f59c0] BIOS reserved [ 0.000000] #8 [00000f1400 - 00000f1530] MP-table mpc [ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE [ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP [ 0.000000] #11 [0000015000 - 0000016000] PGTABLE [ 0.000000] #12 [00009a5000 - 0001487000] NEW RAMDISK [ 0.000000] #13 [0001487000 - 0001488000] BOOTMEM [ 0.000000] #14 [0001488000 - 0002888000] BOOTMEM [ 0.000000] #15 [0002888000 - 0002888004] BOOTMEM [ 0.000000] #16 [0002888040 - 0002888100] BOOTMEM [ 0.000000] #17 [0002888100 - 0002888154] BOOTMEM [ 0.000000] #18 [0002888180 - 000288b180] BOOTMEM [ 0.000000] #19 [000288b180 - 000288b220] BOOTMEM [ 0.000000] #20 [000288b240 - 0002891240] BOOTMEM [ 0.000000] #21 [0002891240 - 0002891267] BOOTMEM [ 0.000000] #22 [0002891280 - 00028913b4] BOOTMEM [ 0.000000] #23 [00028913c0 - 0002891400] BOOTMEM [ 0.000000] #24 [0002891400 - 0002891440] BOOTMEM [ 0.000000] #25 [0002891440 - 0002891480] BOOTMEM [ 0.000000] #26 [0002891480 - 00028914c0] BOOTMEM [ 0.000000] #27 [00028914c0 - 0002891500] BOOTMEM [ 0.000000] #28 [0002891500 - 0002891540] BOOTMEM [ 0.000000] #29 [0002891540 - 0002891580] BOOTMEM [ 0.000000] #30 [0002891580 - 00028915c0] BOOTMEM [ 0.000000] #31 [00028915c0 - 0002891600] BOOTMEM [ 0.000000] #32 [0002891600 - 0002891640] BOOTMEM [ 0.000000] #33 [0002891640 - 0002891650] BOOTMEM [ 0.000000] #34 [0002891680 - 00028916e4] BOOTMEM [ 0.000000] #35 [0002891700 - 0002891764] BOOTMEM [ 0.000000] #36 [0002c00000 - 0002c0e000] BOOTMEM [ 0.000000] #37 [0002e00000 - 0002e0e000] BOOTMEM [ 0.000000] #38 [0002893780 - 0002893784] BOOTMEM [ 0.000000] #39 [00028937c0 - 00028937c4] BOOTMEM [ 0.000000] #40 [0002893800 - 0002893808] BOOTMEM [ 0.000000] #41 [0002893840 - 0002893848] BOOTMEM [ 0.000000] #42 [0002893880 - 0002893928] BOOTMEM [ 0.000000] #43 [0002893940 - 00028939a8] BOOTMEM [ 0.000000] #44 [00028939c0 - 00028979c0] BOOTMEM [ 0.000000] #45 [00028979c0 - 00029179c0] BOOTMEM [ 0.000000] #46 [00029179c0 - 00029579c0] BOOTMEM [ 0.000000] #47 [0002e0e000 - 0003a8dd80] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (000377fe:0009fff0) [ 0.000000] Memory: 2566680k/2621376k available (4928k kernel code, 54244k reserved, 2336k data, 684k init, 1712072k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0819000 - 0xc08c4000 ( 684 kB) [ 0.000000] .data : 0xc05d029e - 0xc0818668 (2336 kB) [ 0.000000] .text : 0xc0100000 - 0xc05d029e (4928 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2010.297 MHz processor. [ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.59 BogoMIPS (lpj=8041188) [ 0.008012] pid_max: default: 32768 minimum: 301 [ 0.008036] Security Framework initialized [ 0.008062] AppArmor: AppArmor initialized [ 0.008065] Yama: becoming mindful. [ 0.008135] Mount-cache hash table entries: 512 [ 0.008290] Initializing cgroup subsys ns [ 0.008295] Initializing cgroup subsys cpuacct [ 0.008300] Initializing cgroup subsys memory [ 0.008311] Initializing cgroup subsys devices [ 0.008315] Initializing cgroup subsys freezer [ 0.008318] Initializing cgroup subsys net_cls [ 0.008347] mce: CPU supports 5 MCE banks [ 0.008363] Performance Events: AMD PMU driver. [ 0.008372] ... version: 0 [ 0.008375] ... bit width: 48 [ 0.008378] ... generic registers: 4 [ 0.008380] ... value mask: 0000ffffffffffff [ 0.008384] ... max period: 00007fffffffffff [ 0.008387] ... fixed-purpose events: 0 [ 0.008389] ... event mask: 000000000000000f [ 0.009251] SMP alternatives: switching to UP code [ 0.018110] ACPI: Core revision 20100428 [ 0.028009] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.028016] ftrace: allocating 21758 entries in 43 pages [ 0.032082] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.032394] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.074830] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00 [ 0.076000] Brought up 1 CPUs [ 0.076000] Total of 1 processors activated (4020.59 BogoMIPS). [ 0.076000] devtmpfs: initialized [ 0.076000] regulator: core version 0.5 [ 0.076000] Time: 14:10:05 Date: 10/31/10 [ 0.076000] NET: Registered protocol family 16 [ 0.076000] EISA bus registered [ 0.076000] node 0 link 0: io port [1000, fffff] [ 0.076000] TOM: 00000000a0000000 aka 2560M [ 0.076000] node 0 link 0: mmio [e0000000, efffffff] [ 0.076000] node 0 link 0: mmio [feb00000, fec0ffff] [ 0.076000] node 0 link 0: mmio [a0000, bffff] [ 0.076000] node 0 link 0: mmio [a0000000, fed3ffff] [ 0.076000] TOM2: 0000000160000000 aka 5632M [ 0.076000] bus: [00, ff] on node 0 link 0 [ 0.076000] bus: 00 index 0 [io 0x0000-0xffff] [ 0.076000] bus: 00 index 1 [mem 0xa0000000-0xffffffff] [ 0.076000] bus: 00 index 2 [mem 0xfeb00000-0xfec0ffff] [ 0.076000] bus: 00 index 3 [mem 0x000a0000-0x000bffff] [ 0.076000] ACPI: bus type pci registered [ 0.076000] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.076000] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.076000] PCI: Using MMCONFIG for extended config space [ 0.076000] PCI: Using configuration type 1 for base access [ 0.076000] bio: create slab at 0 [ 0.076178] ACPI: EC: Look up EC in DSDT [ 0.082602] ACPI: Interpreter enabled [ 0.082606] ACPI: (supports S0 S1 S3 S4 S5) [ 0.082631] ACPI: Using IOAPIC for interrupt routing [ 0.091484] ACPI: No dock devices found. [ 0.091488] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.091588] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.091783] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.091787] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.091790] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.091793] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) [ 0.091796] pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfebfffff] (ignored) [ 0.091870] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.091885] pci 0000:00:01.1: reg 10: [io 0xe400-0xe41f] [ 0.091894] pci 0000:00:01.1: reg 20: [io 0x4c00-0x4c3f] [ 0.091898] pci 0000:00:01.1: reg 24: [io 0x4c40-0x4c7f] [ 0.091908] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.091912] pci 0000:00:01.1: PME# disabled [ 0.091931] pci 0000:00:02.0: reg 10: [mem 0xd2004000-0xd2004fff] [ 0.091948] pci 0000:00:02.0: supports D1 D2 [ 0.091950] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.091954] pci 0000:00:02.0: PME# disabled [ 0.091970] pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff] [ 0.091991] pci 0000:00:02.1: supports D1 D2 [ 0.091993] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.092002] pci 0000:00:02.1: PME# disabled [ 0.092022] pci 0000:00:04.0: reg 10: [io 0xdc00-0xdcff] [ 0.092026] pci 0000:00:04.0: reg 14: [io 0xe000-0xe0ff] [ 0.092030] pci 0000:00:04.0: reg 18: [mem 0xd2003000-0xd2003fff] [ 0.092045] pci 0000:00:04.0: supports D1 D2 [ 0.092064] pci 0000:00:06.0: reg 20: [io 0xf000-0xf00f] [ 0.092088] pci 0000:00:07.0: reg 10: [io 0x09f0-0x09f7] [ 0.092092] pci 0000:00:07.0: reg 14: [io 0x0bf0-0x0bf3] [ 0.092096] pci 0000:00:07.0: reg 18: [io 0x0970-0x0977] [ 0.092099] pci 0000:00:07.0: reg 1c: [io 0x0b70-0x0b73] [ 0.092103] pci 0000:00:07.0: reg 20: [io 0xd800-0xd80f] [ 0.092107] pci 0000:00:07.0: reg 24: [mem 0xd2002000-0xd2002fff] [ 0.092129] pci 0000:00:08.0: reg 10: [io 0x09e0-0x09e7] [ 0.092133] pci 0000:00:08.0: reg 14: [io 0x0be0-0x0be3] [ 0.092137] pci 0000:00:08.0: reg 18: [io 0x0960-0x0967] [ 0.092140] pci 0000:00:08.0: reg 1c: [io 0x0b60-0x0b63] [ 0.092144] pci 0000:00:08.0: reg 20: [io 0xc400-0xc40f] [ 0.092148] pci 0000:00:08.0: reg 24: [mem 0xd2001000-0xd2001fff] [ 0.092182] pci 0000:00:0a.0: reg 10: [mem 0xd2000000-0xd2000fff] [ 0.092186] pci 0000:00:0a.0: reg 14: [io 0xb000-0xb007] [ 0.092202] pci 0000:00:0a.0: supports D1 D2 [ 0.092204] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.092207] pci 0000:00:0a.0: PME# disabled [ 0.092237] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.092240] pci 0000:00:0b.0: PME# disabled [ 0.092271] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.092274] pci 0000:00:0c.0: PME# disabled [ 0.092306] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.092309] pci 0000:00:0d.0: PME# disabled [ 0.092339] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.092342] pci 0000:00:0e.0: PME# disabled [ 0.092421] PCI: peer root bus 00 res updated from pci conf [ 0.092451] pci 0000:05:07.0: reg 10: [io 0x9000-0x90ff] [ 0.092457] pci 0000:05:07.0: reg 14: [mem 0xd100a000-0xd100afff] [ 0.092483] pci 0000:05:07.0: supports D1 D2 [ 0.092486] pci 0000:05:07.0: PME# supported from D1 D2 D3hot [ 0.092489] pci 0000:05:07.0: PME# disabled [ 0.092510] pci 0000:05:0a.0: reg 10: [io 0x9400-0x9407] [ 0.092515] pci 0000:05:0a.0: reg 14: [io 0x9800-0x9803] [ 0.092521] pci 0000:05:0a.0: reg 18: [io 0x9c00-0x9c07] [ 0.092526] pci 0000:05:0a.0: reg 1c: [io 0xa000-0xa003] [ 0.092531] pci 0000:05:0a.0: reg 20: [io 0xa400-0xa40f] [ 0.092536] pci 0000:05:0a.0: reg 24: [mem 0xd1009000-0xd10093ff] [ 0.092541] pci 0000:05:0a.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.092553] pci 0000:05:0a.0: supports D1 D2 [ 0.092574] pci 0000:05:0b.0: reg 10: [mem 0xd1008000-0xd10087ff] [ 0.092579] pci 0000:05:0b.0: reg 14: [mem 0xd1000000-0xd1003fff] [ 0.092606] pci 0000:05:0b.0: supports D1 D2 [ 0.092608] pci 0000:05:0b.0: PME# supported from D0 D1 D2 D3hot [ 0.092612] pci 0000:05:0b.0: PME# disabled [ 0.092634] pci 0000:05:0c.0: reg 10: [mem 0xd1004000-0xd1007fff] [ 0.092640] pci 0000:05:0c.0: reg 14: [io 0xa800-0xa8ff] [ 0.092656] pci 0000:05:0c.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.092671] pci 0000:05:0c.0: supports D1 D2 [ 0.092673] pci 0000:05:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.092677] pci 0000:05:0c.0: PME# disabled [ 0.092697] pci 0000:00:09.0: PCI bridge to [bus 05-05] (subtractive decode) [ 0.092701] pci 0000:00:09.0: bridge window [io 0x9000-0xafff] [ 0.092704] pci 0000:00:09.0: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.092708] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.092711] pci 0000:00:09.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.092714] pci 0000:00:09.0: bridge window [mem 0xa0000000-0xffffffff] (subtractive decode) [ 0.092717] pci 0000:00:09.0: bridge window [mem 0xfeb00000-0xfec0ffff] (subtractive decode) [ 0.092720] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.092741] pci 0000:00:0b.0: PCI bridge to [bus 04-04] [ 0.092745] pci 0000:00:0b.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.092749] pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.092753] pci 0000:00:0b.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.092774] pci 0000:00:0c.0: PCI bridge to [bus 03-03] [ 0.092778] pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.092781] pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.092786] pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.092820] pci 0000:02:00.0: reg 10: [mem 0xc0000000-0xc3ffffff] [ 0.092828] pci 0000:02:00.0: reg 14: [mem 0xb8000000-0xbfffffff 64bit pref] [ 0.092835] pci 0000:02:00.0: reg 1c: [mem 0xc4000000-0xc4ffffff 64bit] [ 0.092843] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.092868] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.092875] pci 0000:00:0d.0: PCI bridge to [bus 02-02] [ 0.092879] pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.092883] pci 0000:00:0d.0: bridge window [mem 0xc0000000-0xc7ffffff] [ 0.092887] pci 0000:00:0d.0: bridge window [mem 0xb8000000-0xbfffffff 64bit pref] [ 0.092919] pci 0000:01:00.0: reg 10: [mem 0xc8000000-0xcbffffff] [ 0.092927] pci 0000:01:00.0: reg 14: [mem 0xb0000000-0xb7ffffff 64bit pref] [ 0.092934] pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xccffffff 64bit] [ 0.092942] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.092964] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.092970] pci 0000:00:0e.0: PCI bridge to [bus 01-01] [ 0.092974] pci 0000:00:0e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.092978] pci 0000:00:0e.0: bridge window [mem 0xc8000000-0xcfffffff] [ 0.092982] pci 0000:00:0e.0: bridge window [mem 0xb0000000-0xb7ffffff 64bit pref] [ 0.092992] pci_bus 0000:00: on NUMA node 0 [ 0.092997] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.093236] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.162798] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.162943] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.163085] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 *7 9 10 11 12 14 15) [ 0.163228] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 *12 14 15) [ 0.163374] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.163515] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.163658] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.163802] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.163945] ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.164096] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.164239] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.164381] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.164525] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.164678] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.164834] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.164988] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.165152] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.165313] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.165470] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.165627] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.165727] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.165892] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 0.166057] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.166222] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.166387] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 0.166551] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.166716] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 0.166881] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 0.167046] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.167220] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.167393] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.167566] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 0.167615] HEST: Table is not found! [ 0.167702] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none [ 0.167707] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.167709] vgaarb: loaded [ 0.167882] SCSI subsystem initialized [ 0.167948] libata version 3.00 loaded. [ 0.168010] usbcore: registered new interface driver usbfs [ 0.168023] usbcore: registered new interface driver hub [ 0.168048] usbcore: registered new device driver usb [ 0.168182] ACPI: WMI: Mapper loaded [ 0.168184] PCI: Using ACPI for IRQ routing [ 0.168188] PCI: pci_cache_line_size set to 64 bytes [ 0.168202] pci 0000:00:02.1: address space collision: [mem 0xfeb00000-0xfeb000ff] conflicts with PCI Bus #00 [mem 0xfeb00000-0xfec0ffff] [ 0.168250] Expanded resource reserved due to conflict with PCI Bus #00 [ 0.168253] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.168256] reserve RAM buffer: 000000009fff0000 - 000000009fffffff [ 0.168352] NetLabel: Initializing [ 0.168354] NetLabel: domain hash size = 128 [ 0.168355] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.168368] NetLabel: unlabeled traffic allowed by default [ 0.178655] AppArmor: AppArmor Filesystem Enabled [ 0.178673] pnp: PnP ACPI init [ 0.178693] ACPI: bus type pnp registered [ 0.182903] pnp: PnP ACPI: found 11 devices [ 0.182905] ACPI: ACPI bus type pnp unregistered [ 0.182909] PnPBIOS: Disabled by ACPI PNP [ 0.182922] system 00:01: [io 0x4000-0x407f] has been reserved [ 0.182925] system 00:01: [io 0x4080-0x40ff] has been reserved [ 0.182928] system 00:01: [io 0x4400-0x447f] has been reserved [ 0.182931] system 00:01: [io 0x4480-0x44ff] has been reserved [ 0.182934] system 00:01: [io 0x4800-0x487f] has been reserved [ 0.182937] system 00:01: [io 0x4880-0x48ff] has been reserved [ 0.182941] system 00:01: [mem 0xa0000000-0xafffffff] has been reserved [ 0.182946] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.182949] system 00:02: [io 0x0800-0x087f] has been reserved [ 0.182952] system 00:02: [io 0x0290-0x0297] has been reserved [ 0.182959] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.182965] system 00:0a: [mem 0x000f0000-0x000f3fff] could not be reserved [ 0.182968] system 00:0a: [mem 0x000f4000-0x000f7fff] could not be reserved [ 0.182971] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.182975] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.182978] system 00:0a: [mem 0x9fff0000-0x9fffffff] could not be reserved [ 0.182981] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved [ 0.182985] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.182988] system 00:0a: [mem 0x00100000-0x9ffeffff] could not be reserved [ 0.182992] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.182995] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.182999] system 00:0a: [mem 0xfefff000-0xfeffffff] has been reserved [ 0.183002] system 00:0a: [mem 0xfff80000-0xfff80fff] has been reserved [ 0.183005] system 00:0a: [mem 0xfff90000-0xfffbffff] has been reserved [ 0.183009] system 00:0a: [mem 0xfffed000-0xfffeffff] has been reserved [ 0.218993] Switching to clocksource acpi_pm [ 0.219044] pci 0000:00:09.0: BAR 15: assigned [mem 0xd2100000-0xd21fffff pref] [ 0.219048] pci 0000:00:02.1: BAR 0: assigned [mem 0xd2005000-0xd20050ff] [ 0.219053] pci 0000:00:02.1: BAR 0: set to [mem 0xd2005000-0xd20050ff] (PCI address [0xd2005000-0xd20050ff] [ 0.219057] pci 0000:05:0a.0: BAR 6: assigned [mem 0xd2100000-0xd217ffff pref] [ 0.219061] pci 0000:05:0c.0: BAR 6: assigned [mem 0xd2180000-0xd219ffff pref] [ 0.219064] pci 0000:00:09.0: PCI bridge to [bus 05-05] [ 0.219067] pci 0000:00:09.0: bridge window [io 0x9000-0xafff] [ 0.219071] pci 0000:00:09.0: bridge window [mem 0xd0000000-0xd1ffffff] [ 0.219074] pci 0000:00:09.0: bridge window [mem 0xd2100000-0xd21fffff pref] [ 0.219078] pci 0000:00:0b.0: PCI bridge to [bus 04-04] [ 0.219080] pci 0000:00:0b.0: bridge window [io disabled] [ 0.219084] pci 0000:00:0b.0: bridge window [mem disabled] [ 0.219086] pci 0000:00:0b.0: bridge window [mem pref disabled] [ 0.219090] pci 0000:00:0c.0: PCI bridge to [bus 03-03] [ 0.219092] pci 0000:00:0c.0: bridge window [io disabled] [ 0.219095] pci 0000:00:0c.0: bridge window [mem disabled] [ 0.219098] pci 0000:00:0c.0: bridge window [mem pref disabled] [ 0.219103] pci 0000:02:00.0: BAR 6: assigned [mem 0xc5000000-0xc501ffff pref] [ 0.219106] pci 0000:00:0d.0: PCI bridge to [bus 02-02] [ 0.219108] pci 0000:00:0d.0: bridge window [io disabled] [ 0.219111] pci 0000:00:0d.0: bridge window [mem 0xc0000000-0xc7ffffff] [ 0.219115] pci 0000:00:0d.0: bridge window [mem 0xb8000000-0xbfffffff 64bit pref] [ 0.219120] pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd01ffff pref] [ 0.219123] pci 0000:00:0e.0: PCI bridge to [bus 01-01] [ 0.219125] pci 0000:00:0e.0: bridge window [io disabled] [ 0.219128] pci 0000:00:0e.0: bridge window [mem 0xc8000000-0xcfffffff] [ 0.219132] pci 0000:00:0e.0: bridge window [mem 0xb0000000-0xb7ffffff 64bit pref] [ 0.219141] pci 0000:00:09.0: setting latency timer to 64 [ 0.219147] pci 0000:00:0b.0: setting latency timer to 64 [ 0.219152] pci 0000:00:0c.0: setting latency timer to 64 [ 0.219158] pci 0000:00:0d.0: setting latency timer to 64 [ 0.219163] pci 0000:00:0e.0: setting latency timer to 64 [ 0.219167] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.219169] pci_bus 0000:00: resource 5 [mem 0xa0000000-0xffffffff] [ 0.219172] pci_bus 0000:00: resource 6 [mem 0xfeb00000-0xfec0ffff] [ 0.219175] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] [ 0.219178] pci_bus 0000:05: resource 0 [io 0x9000-0xafff] [ 0.219180] pci_bus 0000:05: resource 1 [mem 0xd0000000-0xd1ffffff] [ 0.219183] pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd21fffff pref] [ 0.219186] pci_bus 0000:05: resource 4 [io 0x0000-0xffff] [ 0.219189] pci_bus 0000:05: resource 5 [mem 0xa0000000-0xffffffff] [ 0.219192] pci_bus 0000:05: resource 6 [mem 0xfeb00000-0xfec0ffff] [ 0.219194] pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff] [ 0.219198] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc7ffffff] [ 0.219201] pci_bus 0000:02: resource 2 [mem 0xb8000000-0xbfffffff 64bit pref] [ 0.219204] pci_bus 0000:01: resource 1 [mem 0xc8000000-0xcfffffff] [ 0.219207] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xb7ffffff 64bit pref] [ 0.219245] NET: Registered protocol family 2 [ 0.219305] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.219575] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.220000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.220000] TCP: Hash tables configured (established 131072 bind 65536) [ 0.220000] TCP reno registered [ 0.220000] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.220000] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.220000] NET: Registered protocol family 1 [ 0.236100] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.236106] pci 0000:00:0b.0: Found disabled HT MSI Mapping [ 0.236113] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.236118] pci 0000:00:0b.0: Linking AER extended capability [ 0.236158] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.236163] pci 0000:00:0c.0: Found disabled HT MSI Mapping [ 0.236171] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.236174] pci 0000:00:0c.0: Linking AER extended capability [ 0.236218] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.236223] pci 0000:00:0d.0: Found disabled HT MSI Mapping [ 0.236231] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.236234] pci 0000:00:0d.0: Linking AER extended capability [ 0.236281] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.236286] pci 0000:00:0e.0: Found disabled HT MSI Mapping [ 0.236294] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.236297] pci 0000:00:0e.0: Linking AER extended capability [ 0.236328] pci 0000:01:00.0: Boot video device [ 0.236331] PCI: CLS 32 bytes, default 64 [ 0.236527] cpufreq-nforce2: No nForce2 chipset. [ 0.236561] Scanning for low memory corruption every 60 seconds [ 0.236670] audit: initializing netlink socket (disabled) [ 0.236679] type=2000 audit(1288534204.236:1): initialized [ 0.247907] Trying to unpack rootfs image as initramfs... [ 2.638453] highmem bounce pool size: 64 pages [ 2.638459] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 2.639825] VFS: Disk quotas dquot_6.5.2 [ 2.639881] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.640491] fuse init (API version 7.14) [ 2.640578] msgmni has been set to 1669 [ 2.640832] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.640835] io scheduler noop registered [ 2.640837] io scheduler deadline registered [ 2.640850] io scheduler cfq registered (default) [ 2.640961] pcieport 0000:00:0b.0: setting latency timer to 64 [ 2.640977] alloc irq_desc for 40 on node -1 [ 2.640980] alloc kstat_irqs on node -1 [ 2.640988] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X [ 2.641038] pcieport 0000:00:0c.0: setting latency timer to 64 [ 2.641051] alloc irq_desc for 41 on node -1 [ 2.641053] alloc kstat_irqs on node -1 [ 2.641058] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X [ 2.641104] pcieport 0000:00:0d.0: setting latency timer to 64 [ 2.641117] alloc irq_desc for 42 on node -1 [ 2.641119] alloc kstat_irqs on node -1 [ 2.641124] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X [ 2.641170] pcieport 0000:00:0e.0: setting latency timer to 64 [ 2.641182] alloc irq_desc for 43 on node -1 [ 2.641184] alloc kstat_irqs on node -1 [ 2.641189] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X [ 2.641258] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.641284] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.641463] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.641470] ACPI: Power Button [PWRB] [ 2.641532] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.641536] ACPI: Power Button [PWRF] [ 2.641588] ACPI: Fan [FAN] (on) [ 2.642070] ACPI: acpi_idle registered with cpuidle [ 2.646882] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.646890] ACPI: Thermal Zone [THRM] (40 C) [ 2.646946] ERST: Table is not found! [ 2.647122] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.647211] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.647505] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.648680] brd: module loaded [ 2.649208] loop: module loaded [ 2.649458] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 2.649851] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 2.649859] alloc irq_desc for 23 on node -1 [ 2.649862] alloc kstat_irqs on node -1 [ 2.649871] pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 2.649887] pata_acpi 0000:00:07.0: setting latency timer to 64 [ 2.649894] pata_acpi 0000:00:07.0: PCI INT A disabled [ 2.650232] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 2.650235] alloc irq_desc for 22 on node -1 [ 2.650237] alloc kstat_irqs on node -1 [ 2.650244] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 2.650259] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 2.650266] pata_acpi 0000:00:08.0: PCI INT A disabled [ 2.650618] Fixed MDIO Bus: probed [ 2.650658] PPP generic driver version 2.4.2 [ 2.650700] tun: Universal TUN/TAP device driver, 1.6 [ 2.650702] tun: (C) 1999-2004 Max Krasnyansky [ 2.650779] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.651053] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 [ 2.651056] alloc irq_desc for 21 on node -1 [ 2.651058] alloc kstat_irqs on node -1 [ 2.651064] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21 [ 2.651082] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 2.651085] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 2.651125] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 2.651149] ehci_hcd 0000:00:02.1: debug port 1 [ 2.651154] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported [ 2.651172] ehci_hcd 0000:00:02.1: irq 21, io mem 0xd2005000 [ 2.651207] isapnp: Scanning for PnP cards... [ 2.700022] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 2.700145] hub 1-0:1.0: USB hub found [ 2.700151] hub 1-0:1.0: 10 ports detected [ 2.700220] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.700487] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 [ 2.700490] alloc irq_desc for 20 on node -1 [ 2.700492] alloc kstat_irqs on node -1 [ 2.700499] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20 [ 2.700507] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 2.700510] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 2.700544] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 2.700565] ohci_hcd 0000:00:02.0: irq 20, io mem 0xd2004000 [ 2.789396] hub 2-0:1.0: USB hub found [ 2.789401] hub 2-0:1.0: 10 ports detected [ 2.789462] uhci_hcd: USB Universal Host Controller Interface driver [ 2.789549] PNP: No PS/2 controller found. Probing ports directly. [ 3.008080] isapnp: No Plug & Play device found [ 3.040556] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.040660] mice: PS/2 mouse device common for all mice [ 3.040783] rtc_cmos 00:04: RTC can wake from S4 [ 3.040823] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 3.040846] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 3.040966] device-mapper: uevent: version 1.0.3 [ 3.048180] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 3.048253] device-mapper: multipath: version 1.1.1 loaded [ 3.048256] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.052160] EISA: Probing bus 0 at eisa.0 [ 3.052164] EISA: Cannot allocate resource for mainboard [ 3.052167] Cannot allocate resource for EISA slot 1 [ 3.052170] Cannot allocate resource for EISA slot 2 [ 3.052172] Cannot allocate resource for EISA slot 3 [ 3.052174] Cannot allocate resource for EISA slot 4 [ 3.052177] Cannot allocate resource for EISA slot 5 [ 3.052179] Cannot allocate resource for EISA slot 6 [ 3.052181] Cannot allocate resource for EISA slot 7 [ 3.052184] Cannot allocate resource for EISA slot 8 [ 3.052186] EISA: Detected 0 cards. [ 3.056115] cpuidle: using governor ladder [ 3.056119] cpuidle: using governor menu [ 3.056419] TCP cubic registered [ 3.056556] NET: Registered protocol family 10 [ 3.056972] lo: Disabled Privacy Extensions [ 3.057246] NET: Registered protocol family 17 [ 3.057282] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ (1 cpu cores) (version 2.20.00) [ 3.057329] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 [ 3.057332] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 [ 3.057334] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 3.057372] Using IPI No-Shortcut mode [ 3.057468] PM: Resume from disk failed. [ 3.057479] registered taskstats version 1 [ 3.057717] Magic number: 14:455:183 [ 3.057802] rtc_cmos 00:04: setting system clock to 2010-10-31 14:10:08 UTC (1288534208) [ 3.057805] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.057807] EDD information not available. [ 3.373836] Freeing initrd memory: 11144k freed [ 3.381747] Freeing unused kernel memory: 684k freed [ 3.382303] Write protecting the kernel text: 4932k [ 3.382334] Write protecting the kernel read-only data: 1976k [ 3.405811] udev[69]: starting version 163 [ 3.476078] usb 1-3: new high speed USB device using ehci_hcd and address 4 [ 3.503520] Floppy drive(s): fd0 is 1.44M [ 3.543896] pata_amd 0000:00:06.0: version 0.4.1 [ 3.543942] pata_amd 0000:00:06.0: setting latency timer to 64 [ 3.644593] scsi0 : pata_amd [ 3.648359] FDC 0 is a post-1991 82077 [ 3.659247] sata_sil 0000:05:0a.0: version 2.4 [ 3.659522] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 3.659528] alloc irq_desc for 19 on node -1 [ 3.659531] alloc kstat_irqs on node -1 [ 3.659540] sata_sil 0000:05:0a.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 3.659570] sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix [ 3.677189] scsi1 : pata_amd [ 3.677815] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 3.677819] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 3.677956] sata_nv 0000:00:07.0: version 3.5 [ 3.677968] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 3.678020] sata_nv 0000:00:07.0: setting latency timer to 64 [ 3.687942] scsi2 : sata_sil [ 3.690110] scsi3 : sata_nv [ 3.696098] scsi5 : sata_nv [ 3.696319] ata7: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23 [ 3.696323] ata8: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23 [ 3.696351] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 3.696406] sata_nv 0000:00:08.0: setting latency timer to 64 [ 3.696874] scsi4 : sata_sil [ 3.697701] scsi6 : sata_nv [ 3.697863] scsi7 : sata_sil [ 3.698162] Linux agpgart interface v0.103 [ 3.705734] scsi8 : sata_nv [ 3.705946] ata9: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 22 [ 3.705950] ata10: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 22 [ 3.706138] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 3.706424] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23 [ 3.706430] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23 [ 3.706435] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 3.706483] nv_probe: set workaround bit for reversed mac addr [ 3.707030] scsi9 : sata_sil [ 3.707085] ata3: SATA max UDMA/100 mmio m1024@0xd1009000 tf 0xd1009080 irq 19 [ 3.707089] ata4: SATA max UDMA/100 mmio m1024@0xd1009000 tf 0xd10090c0 irq 19 [ 3.707093] ata5: SATA max UDMA/100 mmio m1024@0xd1009000 tf 0xd1009280 irq 19 [ 3.707096] ata6: SATA max UDMA/100 mmio m1024@0xd1009000 tf 0xd10092c0 irq 19 [ 3.707393] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 3.707398] alloc irq_desc for 17 on node -1 [ 3.707400] alloc kstat_irqs on node -1 [ 3.707409] skge 0000:05:0c.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 3.707444] skge: 1.13 addr 0xd1004000 irq 17 chip Yukon-Lite rev 9 [ 3.707981] skge 0000:05:0c.0: eth0: addr 00:15:f2:09:c4:86 [ 3.724538] [drm] Initialized drm 1.1.0 20060810 [ 3.868025] usb 1-10: new high speed USB device using ehci_hcd and address 6 [ 4.044026] ata3: SATA link down (SStatus 0 SControl 310) [ 4.164029] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.172109] ata7.00: ATAPI: ATAPI iHAS424 Y, ZL1U, max UDMA/100 [ 4.176022] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.181065] ata9.00: ATA-7: Maxtor 7L300S0, BANC1G10, max UDMA/133 [ 4.181068] ata9.00: 586114704 sectors, multi 1: LBA48 NCQ (not used) [ 4.188146] ata7.00: configured for UDMA/100 [ 4.197058] ata9.00: configured for UDMA/133 [ 4.197817] scsi 3:0:0:0: CD-ROM ATAPI iHAS424 Y ZL1U PQ: 0 ANSI: 5 [ 4.200960] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.200964] Uniform CD-ROM driver Revision: 3.20 [ 4.201070] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 4.201132] sr 3:0:0:0: Attached scsi generic sg0 type 5 [ 4.224748] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:15:f2:09:b0:9a [ 4.224753] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 [ 4.312030] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 4.512021] ata8: SATA link down (SStatus 0 SControl 300) [ 4.512146] scsi 6:0:0:0: Direct-Access ATA Maxtor 7L300S0 BANC PQ: 0 ANSI: 5 [ 4.512317] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 4.512566] sd 6:0:0:0: [sda] 586114704 512-byte logical blocks: (300 GB/279 GiB) [ 4.512614] sd 6:0:0:0: [sda] Write Protect is off [ 4.512617] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.512638] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.512767] sda: sda1 sda2 < [ 4.549831] usbcore: registered new interface driver hiddev [ 4.553199] sda5 > [ 4.553768] sd 6:0:0:0: [sda] Attached SCSI disk [ 4.557940] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2 [ 4.558091] generic-usb 0003:0A81:0101.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:02.0-1/input0 [ 4.571461] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.1/input/input3 [ 4.571597] generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:02.0-1/input1 [ 4.571790] usbcore: registered new interface driver usbhid [ 4.571792] usbhid: USB HID core driver [ 4.824026] ata10: SATA link down (SStatus 0 SControl 300) [ 4.832022] usb 2-2: new low speed USB device using ohci_hcd and address 3 [ 5.069467] input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input4 [ 5.069951] generic-usb 0003:045E:00E1.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:02.0-2/input0 [ 5.144028] ata4: SATA link down (SStatus 0 SControl 310) [ 5.372018] usb 2-4: new full speed USB device using ohci_hcd and address 4 [ 5.464028] ata5: SATA link down (SStatus 0 SControl 310) [ 5.784032] ata6: SATA link down (SStatus 0 SControl 310) [ 5.804390] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 5.804397] alloc irq_desc for 16 on node -1 [ 5.804399] alloc kstat_irqs on node -1 [ 5.804409] firewire_ohci 0000:05:0b.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 5.860912] firewire_ohci: Added fw-ohci device 0000:05:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 5.869218] nouveau 0000:02:00.0: enabling device (0000 -> 0002) [ 5.869232] nouveau 0000:02:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 5.869238] nouveau 0000:02:00.0: setting latency timer to 64 [ 5.872912] [drm] nouveau 0000:02:00.0: Detected an NV40 generation card (0x043000a4) [ 5.874353] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN [ 5.874357] [drm] nouveau 0000:02:00.0: ... BIOS signature not found [ 5.874359] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PROM [ 6.000528] [drm] nouveau 0000:02:00.0: ... appears to be valid [ 6.000532] [drm] nouveau 0000:02:00.0: BIT BIOS found [ 6.000536] [drm] nouveau 0000:02:00.0: Bios version 05.43.02.66 [ 6.000539] [drm] nouveau 0000:02:00.0: BIT table 'd' not found [ 6.000543] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 3.0 [ 6.000546] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 01000300 00000028 [ 6.000550] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 04011312 00000000 [ 6.000553] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028 [ 6.000556] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 020223f1 0080c030 [ 6.000560] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x30 5 7 2 [ 6.000563] [drm] nouveau 0000:02:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 6.000567] [drm] nouveau 0000:02:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 6.000570] [drm] nouveau 0000:02:00.0: 2: 0x00000211: type 0x11 idx 2 tag 0xff [ 6.000573] [drm] nouveau 0000:02:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff [ 6.000577] [drm] nouveau 0000:02:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff [ 6.000587] [drm] nouveau 0000:02:00.0: Adaptor not initialised [ 6.000589] [drm] nouveau 0000:02:00.0: Running VBIOS init tables [ 6.000594] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xE0D7 [ 6.000925] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xE4D7 [ 6.048255] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE9AA [ 6.048299] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xEB3B [ 6.072032] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xEC19 [ 6.072040] [drm] nouveau 0000:02:00.0: Detected 128MiB VRAM [ 6.080134] [TTM] Zone kernel: Available graphics memory: 433218 kiB. [ 6.080137] [TTM] Zone highmem: Available graphics memory: 1289254 kiB. [ 6.080139] [TTM] Initializing pool allocator. [ 6.081269] [drm] nouveau 0000:02:00.0: 64 MiB GART (aperture) [ 6.081497] [drm] nouveau 0000:02:00.0: Allocating FIFO number 0 [ 6.082100] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 6.082108] [drm] nouveau 0000:02:00.0: Initial CRTC_OWNER is 0 [ 6.082114] [drm] nouveau 0000:02:00.0: Saving VGA fonts [ 6.168100] [drm] nouveau 0000:02:00.0: Detected a VGA connector [ 6.168234] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector [ 6.168322] [drm] nouveau 0000:02:00.0: Detected a TV connector [ 6.169626] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 6.169630] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on tmds encoder (output 1) [ 6.169633] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 6.169637] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 6.360104] firewire_core: created device fw0: GUID 0011d800006bf675, S400 [ 6.380026] [drm] nouveau 0000:02:00.0: Load detected on output B [ 6.380534] [drm] nouveau 0000:02:00.0: allocated 1280x1024 fb: 0x49000, bo f6b7e000 [ 6.393158] [drm] nouveau 0000:02:00.0: Output DVI-I-1 is running on CRTC 0 using output C [ 6.393164] [drm] nouveau 0000:02:00.0: 0xD576: Parsing digital output script table [ 6.448025] [drm] nouveau 0000:02:00.0: Setting dpms mode 0 on tmds encoder (output 1) [ 6.448029] [drm] nouveau 0000:02:00.0: Output DVI-I-1 is running on CRTC 0 using output C [ 6.458278] [drm] nouveau 0000:02:00.0: Setting dpms mode 0 on TV encoder (output 3) [ 6.458289] [drm] nouveau 0000:02:00.0: Output TV-1 is running on CRTC 1 using output B [ 6.458676] Console: switching to colour frame buffer device 90x36 [ 6.459733] fb0: nouveaufb frame buffer device [ 6.459735] drm: registered panic notifier [ 6.459738] Slow work thread pool: Starting up [ 6.459793] Slow work thread pool: Ready [ 6.459800] [drm] Initialized nouveau 0.0.16 20090420 for 0000:02:00.0 on minor 0 [ 6.460071] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 6.460077] alloc irq_desc for 18 on node -1 [ 6.460079] alloc kstat_irqs on node -1 [ 6.460088] nouveau 0000:01:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 6.460094] nouveau 0000:01:00.0: setting latency timer to 64 [ 6.463463] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x043000a4) [ 6.464959] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 6.544266] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 6.544270] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 6.544273] [drm] nouveau 0000:01:00.0: Bios version 05.43.02.66 [ 6.544277] [drm] nouveau 0000:01:00.0: BIT table 'd' not found [ 6.544280] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0 [ 6.544284] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028 [ 6.544288] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 04011312 00000000 [ 6.544290] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028 [ 6.544293] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020223f1 0080c030 [ 6.544298] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 7 2 [ 6.544301] [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 6.544305] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 6.544308] [drm] nouveau 0000:01:00.0: 2: 0x00000211: type 0x11 idx 2 tag 0xff [ 6.544311] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff [ 6.544315] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff [ 6.544326] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE0D7 [ 6.544625] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE4D7 [ 6.592225] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE9AA [ 6.592244] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB3B [ 6.616024] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEC19 [ 6.616030] [drm] nouveau 0000:01:00.0: Detected 128MiB VRAM [ 6.623553] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [ 6.623793] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [ 6.624415] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 6.624422] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [ 6.624428] [drm] nouveau 0000:01:00.0: Saving VGA fonts [ 6.672617] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 6.672954] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 6.673332] [drm] nouveau 0000:01:00.0: Detected a TV connector [ 6.675053] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 6.675057] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [ 6.675061] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 6.675064] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3) [ 6.884509] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo c10c6800 [ 6.884909] fb1: nouveaufb frame buffer device [ 6.884918] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 1 [ 7.127363] Btrfs loaded [ 7.134303] xor: automatically using best checksumming function: pIII_sse [ 7.152011] pIII_sse : 5925.000 MB/sec [ 7.152014] xor: using function: pIII_sse (5925.000 MB/sec) [ 7.155465] device-mapper: dm-raid45: initialized v0.2594b [ 7.422358] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 9.250016] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 9.288957] ISO 9660 Extensions: RRIP_1991A [ 9.463502] aufs 2-standalone.tree-35-rcN-20100705 [ 9.554690] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 55.855313] Adding 11910140k swap on /dev/sda5. Priority:-1 extents:1 across:11910140k [ 56.896487] udev[1305]: starting version 163 [ 62.558348] i2c i2c-4: nForce2 SMBus adapter at 0x4c00 [ 62.558433] i2c i2c-5: nForce2 SMBus adapter at 0x4c40 [ 63.486121] Linux video capture interface: v2.00 [ 63.759810] uvcvideo: Found UVC 1.00 device Philips SPC 1330NC (0471:2037) [ 63.767073] input: Philips SPC 1330NC as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3:1.0/input/input5 [ 63.767190] usbcore: registered new interface driver uvcvideo [ 63.767192] USB Video Class driver (v0.1.0) [ 67.492523] 4:3:1: cannot get freq at ep 0x84 [ 67.577565] usbcore: registered new interface driver snd-usb-audio [ 67.804756] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 67.804763] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22 [ 67.804791] Intel ICH 0000:00:04.0: setting latency timer to 64 [ 67.806190] skge 0000:05:0c.0: eth0: enabling interface [ 67.828378] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 67.839051] eth1: no link during initialization. [ 67.841711] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 68.128032] intel8x0_measure_ac97_clock: measured 54728 usecs (2688 samples) [ 68.128036] intel8x0: clocking to 46910 [ 69.513643] lp: driver loaded but no devices found [ 70.005091] ppdev: user-space parallel port driver [ 70.150776] skge 0000:05:0c.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both [ 70.150992] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready