[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-25-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #44-Ubuntu SMP Fri Sep 17 20:26:08 UTC 2010 (Ubuntu 2.6.32-25.44-generic 2.6.32.21+drm33.7) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006fff0000 (usable) [ 0.000000] BIOS-e820: 000000006fff0000 - 000000006fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006fff3000 - 0000000070000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x6fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-protect [ 0.000000] F0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FE0000000 write-back [ 0.000000] 2 base 060000000 mask FF0000000 write-back [ 0.000000] 3 base 0E0000000 mask FFC000000 write-combining [ 0.000000] 4 base 0E0000000 mask FFC000000 write-combining [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 00000000000a0000 (usable) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000006fff0000 (usable) [ 0.000000] modified: 000000006fff0000 - 000000006fff3000 (ACPI NVS) [ 0.000000] modified: 000000006fff3000 - 0000000070000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37858000 - 37fef81d [ 0.000000] Allocated new RAMDISK: 008e1000 - 0107881d [ 0.000000] Move RAMDISK from 0000000037858000 - 0000000037fef81c to 008e1000 - 0107881c [ 0.000000] ACPI: RSDP 000f7110 00014 (v00 VIA694) [ 0.000000] ACPI: RSDT 6fff3000 00028 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 6fff3040 00074 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 6fff30c0 038B2 (v01 VIA694 AWRDACPI 00001000 MSFT 0100000D) [ 0.000000] ACPI: FACS 6fff0000 00040 [ 0.000000] 903MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==> [0000100000 - 00008dced8] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00008dd000 - 00008e0092] BRK ==> [00008dd000 - 00008e0092] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008e1000 - 000107881d] NEW RAMDISK ==> [00008e1000 - 000107881d] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0006fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0006fff0 [ 0.000000] On node 0 totalpages: 458624 [ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c107a200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1808 pages used for memmap [ 0.000000] HighMem zone: 229602 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Found and enabled local APIC! [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 70000000:8ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 455040 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=ba194668-b239-4541-bf4e-0753db63f59a ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 9174400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0006fff0) [ 0.000000] Memory: 1793436k/1834944k available (4680k kernel code, 40048k reserved, 2122k data, 656k init, 925640k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB) [ 0.000000] .data : 0xc05922c7 - 0xc07a4e68 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc05922c7 (4680 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2000.706 MHz processor. [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 4001.41 BogoMIPS (lpj=8002824) [ 0.004038] Security Framework initialized [ 0.004090] AppArmor: AppArmor initialized [ 0.004101] Mount-cache hash table entries: 512 [ 0.004307] Initializing cgroup subsys ns [ 0.004314] Initializing cgroup subsys cpuacct [ 0.004319] Initializing cgroup subsys memory [ 0.004333] Initializing cgroup subsys devices [ 0.004337] Initializing cgroup subsys freezer [ 0.004340] Initializing cgroup subsys net_cls [ 0.004369] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004372] CPU: L2 Cache: 256K (64 bytes/line) [ 0.004378] mce: CPU supports 4 MCE banks [ 0.004408] Performance Events: AMD PMU driver. [ 0.004417] ... version: 0 [ 0.004419] ... bit width: 48 [ 0.004421] ... generic registers: 4 [ 0.004424] ... value mask: 0000ffffffffffff [ 0.004427] ... max period: 00007fffffffffff [ 0.004429] ... fixed-purpose events: 0 [ 0.004431] ... event mask: 000000000000000f [ 0.004437] Checking 'hlt' instruction... OK. [ 0.020661] SMP alternatives: switching to UP code [ 0.027512] Freeing SMP alternatives: 19k freed [ 0.027560] ACPI: Core revision 20090903 [ 0.034091] ACPI: setting ELCR to 0200 (from 1e20) [ 0.036200] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036213] ftrace: allocating 21789 entries in 43 pages [ 0.040174] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.040180] weird, boot CPU (#0) not listed by the BIOS. [ 0.040183] SMP motherboard not detected. [ 0.044001] SMP disabled [ 0.044001] Brought up 1 CPUs [ 0.044001] Total of 1 processors activated (4001.41 BogoMIPS). [ 0.044001] CPU0 attaching NULL sched-domain. [ 0.044001] devtmpfs: initialized [ 0.044001] regulator: core version 0.5 [ 0.044001] Time: 21:02:49 Date: 10/23/10 [ 0.044001] NET: Registered protocol family 16 [ 0.044001] EISA bus registered [ 0.044001] ACPI: bus type pci registered [ 0.118318] PCI: PCI BIOS revision 2.10 entry at 0xfb490, last bus=1 [ 0.118321] PCI: Using configuration type 1 for base access [ 0.119407] bio: create slab at 0 [ 0.120038] ACPI: EC: Look up EC in DSDT [ 0.124979] ACPI: Interpreter enabled [ 0.124984] ACPI: (supports S0 S1 S4 S5) [ 0.125011] ACPI: Using PIC for interrupt routing [ 0.128585] ACPI: No dock devices found. [ 0.128700] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.128765] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe3ffffff] [ 0.128857] pci 0000:00:01.0: supports D1 [ 0.128910] pci 0000:00:08.0: reg 20 io port: [0xd000-0xd01f] [ 0.128934] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold [ 0.128939] pci 0000:00:08.0: PME# disabled [ 0.128984] pci 0000:00:08.1: reg 20 io port: [0xd400-0xd41f] [ 0.129008] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold [ 0.129012] pci 0000:00:08.1: PME# disabled [ 0.129043] pci 0000:00:08.2: reg 10 32bit mmio: [0xea000000-0xea0000ff] [ 0.129082] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold [ 0.129086] pci 0000:00:08.2: PME# disabled [ 0.129122] pci 0000:00:09.0: reg 10 io port: [0xd800-0xd8ff] [ 0.129129] pci 0000:00:09.0: reg 14 32bit mmio: [0xea001000-0xea0010ff] [ 0.129165] pci 0000:00:09.0: supports D1 D2 [ 0.129167] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold [ 0.129172] pci 0000:00:09.0: PME# disabled [ 0.129208] pci 0000:00:0d.0: reg 10 io port: [0xdc00-0xdc1f] [ 0.129246] pci 0000:00:0d.0: supports D1 D2 [ 0.129276] pci 0000:00:0d.1: reg 10 io port: [0xe000-0xe007] [ 0.129314] pci 0000:00:0d.1: supports D1 D2 [ 0.129438] pci 0000:00:11.1: reg 20 io port: [0xe400-0xe40f] [ 0.129508] pci 0000:00:11.2: reg 20 io port: [0xe800-0xe81f] [ 0.129574] pci 0000:00:11.3: reg 20 io port: [0xec00-0xec1f] [ 0.129656] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe4000000-0xe7ffffff] [ 0.129663] pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff] [ 0.129669] pci 0000:01:00.0: reg 18 32bit mmio: [0xe9000000-0xe9003fff] [ 0.129686] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.129707] pci 0000:01:00.0: supports D1 [ 0.129740] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.129745] pci 0000:00:01.0: bridge 32bit mmio: [0xe8000000-0xe9ffffff] [ 0.129750] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe4000000-0xe7ffffff] [ 0.129758] pci_bus 0000:00: on NUMA node 0 [ 0.129764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.146181] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) [ 0.146362] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) [ 0.146544] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) [ 0.146725] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) [ 0.146923] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *0 [ 0.147091] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *0 [ 0.147287] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0 [ 0.147449] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0 [ 0.147600] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.147604] vgaarb: loaded [ 0.147794] SCSI subsystem initialized [ 0.147931] libata version 3.00 loaded. [ 0.148057] usbcore: registered new interface driver usbfs [ 0.148072] usbcore: registered new interface driver hub [ 0.148111] usbcore: registered new device driver usb [ 0.148279] ACPI: WMI: Mapper loaded [ 0.148282] PCI: Using ACPI for IRQ routing [ 0.148460] NetLabel: Initializing [ 0.148463] NetLabel: domain hash size = 128 [ 0.148465] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.148484] NetLabel: unlabeled traffic allowed by default [ 0.148541] Switching to clocksource tsc [ 0.151211] AppArmor: AppArmor Filesystem Enabled [ 0.151248] pnp: PnP ACPI init [ 0.151285] ACPI: bus type pnp registered [ 0.153664] pnp: PnP ACPI: found 11 devices [ 0.153667] ACPI: ACPI bus type pnp unregistered [ 0.153672] PnPBIOS: Disabled by ACPI PNP [ 0.153690] system 00:00: iomem range 0xc8000-0xcbfff has been reserved [ 0.153694] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 0.153697] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.153701] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.153705] system 00:00: iomem range 0x6fff0000-0x6fffffff could not be reserved [ 0.153709] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.153712] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.153716] system 00:00: iomem range 0x100000-0x6ffeffff could not be reserved [ 0.153720] system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.153723] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.153727] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.153735] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.153739] system 00:02: ioport range 0x294-0x297 has been reserved [ 0.188513] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.188517] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.188524] pci 0000:00:01.0: MEM window: 0xe8000000-0xe9ffffff [ 0.188529] pci 0000:00:01.0: PREFETCH window: 0xe4000000-0xe7ffffff [ 0.188545] pci 0000:00:01.0: setting latency timer to 64 [ 0.188552] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.188555] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.188558] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.188561] pci_bus 0000:01: resource 1 mem: [0xe8000000-0xe9ffffff] [ 0.188565] pci_bus 0000:01: resource 2 pref mem [0xe4000000-0xe7ffffff] [ 0.188618] NET: Registered protocol family 2 [ 0.188736] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.189240] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.191256] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.192348] TCP: Hash tables configured (established 131072 bind 65536) [ 0.192354] TCP reno registered [ 0.192519] NET: Registered protocol family 1 [ 0.192544] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.192636] pci 0000:01:00.0: Boot video device [ 0.192951] cpufreq-nforce2: No nForce2 chipset. [ 0.192982] Scanning for low memory corruption every 60 seconds [ 0.193124] audit: initializing netlink socket (disabled) [ 0.193140] type=2000 audit(1287867769.191:1): initialized [ 0.202999] Trying to unpack rootfs image as initramfs... [ 0.215598] highmem bounce pool size: 64 pages [ 0.215609] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.217518] VFS: Disk quotas dquot_6.5.2 [ 0.217602] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.223720] fuse init (API version 7.13) [ 0.223902] msgmni has been set to 1696 [ 0.224271] alg: No test for stdrng (krng) [ 0.224315] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.224320] io scheduler noop registered [ 0.224322] io scheduler anticipatory registered [ 0.224325] io scheduler deadline registered [ 0.224369] io scheduler cfq registered (default) [ 0.224514] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.224542] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.224665] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.224672] ACPI: Power Button [PWRB] [ 0.224743] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.224746] ACPI: Power Button [PWRF] [ 0.224808] fan PNP0C0B:00: registered as cooling_device0 [ 0.224819] ACPI: Fan [FAN] (on) [ 0.225036] Marking TSC unstable due to TSC halts in idle [ 0.225089] processor LNXCPU:00: registered as cooling_device1 [ 0.227412] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.227412] ACPI: Thermal Zone [THRM] (37 C) [ 0.229161] isapnp: Scanning for PnP cards... [ 0.234660] Switching to clocksource acpi_pm [ 0.237866] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.237978] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.238075] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.238385] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.238507] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.239801] brd: module loaded [ 0.240402] loop: module loaded [ 0.240559] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.244398] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.244405] PCI: setting IRQ 11 as level-triggered [ 0.244414] pata_acpi 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.244421] pata_acpi 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 11 [ 0.244538] pata_acpi 0000:00:11.1: PCI INT A disabled [ 0.244961] Fixed MDIO Bus: probed [ 0.245003] PPP generic driver version 2.4.2 [ 0.245109] tun: Universal TUN/TAP device driver, 1.6 [ 0.245112] tun: (C) 1999-2004 Max Krasnyansky [ 0.245238] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.245685] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 0.245689] PCI: setting IRQ 10 as level-triggered [ 0.245695] ehci_hcd 0000:00:08.2: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 0.245720] ehci_hcd 0000:00:08.2: EHCI Host Controller [ 0.245771] ehci_hcd 0000:00:08.2: new USB bus registered, assigned bus number 1 [ 0.245837] ehci_hcd 0000:00:08.2: irq 10, io mem 0xea000000 [ 0.292352] ehci_hcd 0000:00:08.2: USB 2.0 started, EHCI 0.95 [ 0.292571] usb usb1: configuration #1 chosen from 1 choice [ 0.292611] hub 1-0:1.0: USB hub found [ 0.292631] hub 1-0:1.0: 4 ports detected [ 0.292719] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.292741] uhci_hcd: USB Universal Host Controller Interface driver [ 0.293240] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 [ 0.293244] PCI: setting IRQ 5 as level-triggered [ 0.293252] uhci_hcd 0000:00:08.0: PCI INT A -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 0.293264] uhci_hcd 0000:00:08.0: UHCI Host Controller [ 0.293323] uhci_hcd 0000:00:08.0: new USB bus registered, assigned bus number 2 [ 0.293356] uhci_hcd 0000:00:08.0: irq 5, io base 0x0000d000 [ 0.293482] usb usb2: configuration #1 chosen from 1 choice [ 0.293513] hub 2-0:1.0: USB hub found [ 0.293528] hub 2-0:1.0: 2 ports detected [ 0.293995] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12 [ 0.293998] PCI: setting IRQ 12 as level-triggered [ 0.294005] uhci_hcd 0000:00:08.1: PCI INT B -> Link[LNKB] -> GSI 12 (level, low) -> IRQ 12 [ 0.294012] uhci_hcd 0000:00:08.1: UHCI Host Controller [ 0.294062] uhci_hcd 0000:00:08.1: new USB bus registered, assigned bus number 3 [ 0.294086] uhci_hcd 0000:00:08.1: irq 12, io base 0x0000d400 [ 0.294212] usb usb3: configuration #1 chosen from 1 choice [ 0.294249] hub 3-0:1.0: USB hub found [ 0.294262] hub 3-0:1.0: 2 ports detected [ 0.294318] uhci_hcd 0000:00:11.2: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 0.294327] uhci_hcd 0000:00:11.2: UHCI Host Controller [ 0.294364] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 4 [ 0.294384] uhci_hcd 0000:00:11.2: irq 5, io base 0x0000e800 [ 0.294510] usb usb4: configuration #1 chosen from 1 choice [ 0.294546] hub 4-0:1.0: USB hub found [ 0.294559] hub 4-0:1.0: 2 ports detected [ 0.294609] uhci_hcd 0000:00:11.3: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5 [ 0.294617] uhci_hcd 0000:00:11.3: UHCI Host Controller [ 0.294653] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 5 [ 0.294674] uhci_hcd 0000:00:11.3: irq 5, io base 0x0000ec00 [ 0.294805] usb usb5: configuration #1 chosen from 1 choice [ 0.294834] hub 5-0:1.0: USB hub found [ 0.294845] hub 5-0:1.0: 2 ports detected [ 0.294958] PNP: No PS/2 controller found. Probing ports directly. [ 0.556019] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.556239] mice: PS/2 mouse device common for all mice [ 0.556384] rtc_cmos 00:04: RTC can wake from S4 [ 0.556439] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.556464] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.556601] device-mapper: uevent: version 1.0.3 [ 0.560331] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.564381] device-mapper: multipath: version 1.1.0 loaded [ 0.564389] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.564699] EISA: Probing bus 0 at eisa.0 [ 0.564718] Cannot allocate resource for EISA slot 4 [ 0.564734] EISA: Detected 0 cards. [ 0.564858] cpuidle: using governor ladder [ 0.564912] cpuidle: using governor menu [ 0.565415] TCP cubic registered [ 0.565589] NET: Registered protocol family 10 [ 0.566100] lo: Disabled Privacy Extensions [ 0.566441] NET: Registered protocol family 17 [ 0.566506] powernow-k8: Processor cpuid 681 not supported [ 0.566540] Using IPI No-Shortcut mode [ 0.566694] PM: Resume from disk failed. [ 0.566713] registered taskstats version 1 [ 0.566972] Magic number: 14:941:45 [ 0.567113] rtc_cmos 00:04: setting system clock to 2010-10-23 21:02:50 UTC (1287867770) [ 0.567117] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.567120] EDD information not available. [ 0.647698] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.746208] Freeing initrd memory: 7774k freed [ 0.847184] isapnp: No Plug & Play device found [ 0.847219] Freeing unused kernel memory: 656k freed [ 0.848549] Write protecting the kernel text: 4684k [ 0.848584] Write protecting the kernel read-only data: 1840k [ 0.872565] usb 1-1: device descriptor read/all, error -71 [ 0.885043] udev: starting version 151 [ 0.989892] usb 1-1: new high speed USB device using ehci_hcd and address 3 [ 1.133950] pata_via 0000:00:11.1: version 0.3.4 [ 1.133977] pata_via 0000:00:11.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.133984] pata_via 0000:00:11.1: VIA VLink IRQ fixup, from 255 to 11 [ 1.134754] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.139616] scsi0 : pata_via [ 1.142811] scsi1 : pata_via [ 1.146699] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14 [ 1.146704] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15 [ 1.146915] 8139cp 0000:00:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.484550] ata1.00: ATA-5: ST360021A, 3.19, max UDMA/100 [ 1.484554] ata1.00: 117231408 sectors, multi 16: LBA [ 1.484588] ata1.01: ATAPI: ATAPI iHAP122 9, 6L0C, max UDMA/66 [ 1.500411] ata1.00: configured for UDMA/100 [ 1.516031] usb 1-1: device not accepting address 3, error -71 [ 1.516294] ata1.01: configured for UDMA/66 [ 1.517165] scsi 0:0:0:0: Direct-Access ATA ST360021A 3.19 PQ: 0 ANSI: 5 [ 1.517417] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.518914] scsi 0:0:1:0: CD-ROM ATAPI iHAP122 9 6L0C PQ: 0 ANSI: 5 [ 1.519441] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 1.525120] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.525125] Uniform CD-ROM driver Revision: 3.20 [ 1.525444] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 1.525625] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 1.525989] sd 0:0:0:0: [sda] Write Protect is off [ 1.525993] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.526074] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.526279] sda: sda1 < [ 1.628030] usb 1-1: new high speed USB device using ehci_hcd and address 4 [ 1.660258] usb 1-1: device descriptor read/8, error -71 [ 1.696617] ata2.00: ATA-7: Maxtor 6E040L0, NAR61590, max UDMA/133 [ 1.696621] ata2.00: 80293248 sectors, multi 16: LBA [ 1.696859] ata2.01: ATA-4: ST34311A, 8.01, max UDMA/33 [ 1.696862] ata2.01: 8452080 sectors, multi 16: LBA [ 1.696885] ata2.00: limited to UDMA/33 due to 40-wire cable [ 1.704441] ata2.00: configured for UDMA/33 [ 1.720461] ata2.01: configured for UDMA/33 [ 1.720591] scsi 1:0:0:0: Direct-Access ATA Maxtor 6E040L0 NAR6 PQ: 0 ANSI: 5 [ 1.720827] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 1.721216] sd 1:0:0:0: [sdb] 80293248 512-byte logical blocks: (41.1 GB/38.2 GiB) [ 1.721283] sd 1:0:0:0: [sdb] Write Protect is off [ 1.721287] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.721321] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.721456] scsi 1:0:1:0: Direct-Access ATA ST34311A 8.01 PQ: 0 ANSI: 5 [ 1.721620] sd 1:0:1:0: Attached scsi generic sg3 type 0 [ 1.721989] sdb: [ 1.792288] usb 1-1: device descriptor read/8, error -71 [ 1.902713] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1.902716] ata1.00: BMDMA stat 0x64 [ 1.902722] ata1.00: failed command: READ DMA [ 1.902729] ata1.00: cmd c8/00:08:c0:3e:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 1.902731] res 51/84:00:c0:3e:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 1.902734] ata1.00: status: { DRDY ERR } [ 1.902737] ata1.00: error: { ICRC ABRT } [ 1.902773] ata1: soft resetting link [ 2.008033] usb 1-1: new high speed USB device using ehci_hcd and address 5 [ 2.040225] usb 1-1: device descriptor read/8, error -71 [ 2.172260] usb 1-1: device descriptor read/8, error -71 [ 2.256438] ata1.00: configured for UDMA/100 [ 2.272256] ata1.01: configured for UDMA/66 [ 2.272926] ata1: EH complete [ 2.276035] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 2.400031] usb 1-2: new high speed USB device using ehci_hcd and address 6 [ 2.421207] sdb1 sdb2 sdb3 < [ 2.421299] sd 1:0:1:0: [sdc] 8452080 512-byte logical blocks: (4.32 GB/4.02 GiB) [ 2.439145] sd 1:0:1:0: [sdc] Write Protect is off [ 2.439149] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.439183] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.439314] sdb5 sdb6 sdb7 > [ 2.488261] sdc: sdc1 [ 2.511301] sd 1:0:1:0: [sdc] Attached SCSI disk [ 2.511427] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.552228] usb 1-2: unable to read config index 0 descriptor/all [ 2.552232] usb 1-2: can't read configurations, error -71 [ 2.668032] usb 1-2: new high speed USB device using ehci_hcd and address 7 [ 2.684356] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2.684360] ata1.00: BMDMA stat 0x64 [ 2.684365] ata1.00: failed command: READ DMA [ 2.684372] ata1.00: cmd c8/00:08:c0:3e:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 2.684374] res 51/84:00:c0:3e:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 2.684378] ata1.00: status: { DRDY ERR } [ 2.684380] ata1.00: error: { ICRC ABRT } [ 2.684421] ata1: soft resetting link [ 2.812290] usb 1-2: device descriptor read/all, error -71 [ 2.928031] usb 1-2: new high speed USB device using ehci_hcd and address 8 [ 2.960323] usb 1-2: device descriptor read/8, error -71 [ 3.040415] ata1.00: configured for UDMA/100 [ 3.056262] ata1.01: configured for UDMA/66 [ 3.056958] ata1: EH complete [ 3.092227] usb 1-2: device descriptor read/8, error -71 [ 3.308025] usb 1-2: new high speed USB device using ehci_hcd and address 9 [ 3.340287] usb 1-2: device descriptor read/8, error -71 [ 3.411478] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 3.411481] ata1.00: BMDMA stat 0x64 [ 3.411484] ata1.00: failed command: READ DMA [ 3.411491] ata1.00: cmd c8/00:08:c0:3e:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 3.411493] res 51/84:00:c0:3e:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 3.411496] ata1.00: status: { DRDY ERR } [ 3.411498] ata1.00: error: { ICRC ABRT } [ 3.411522] ata1: soft resetting link [ 3.472316] usb 1-2: device descriptor read/8, error -71 [ 3.576035] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 3.588032] hub 1-0:1.0: over-current change on port 3 [ 3.692030] hub 1-0:1.0: over-current change on port 4 [ 3.764389] ata1.00: configured for UDMA/100 [ 3.780261] ata1.01: configured for UDMA/66 [ 3.780948] ata1: EH complete [ 4.036024] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 4.174302] usb 2-1: not running at top speed; connect to a high speed hub [ 4.179949] ata1.00: limiting speed to UDMA/66:PIO4 [ 4.179954] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 4.179957] ata1.00: BMDMA stat 0x64 [ 4.179960] ata1.00: failed command: READ DMA [ 4.179967] ata1.00: cmd c8/00:08:c0:3e:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 4.179969] res 51/84:00:c0:3e:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 4.179972] ata1.00: status: { DRDY ERR } [ 4.179974] ata1.00: error: { ICRC ABRT } [ 4.179998] ata1: soft resetting link [ 4.199476] usb 2-1: configuration #1 chosen from 1 choice [ 4.219095] Initializing USB Mass Storage driver... [ 4.219302] scsi2 : SCSI emulation for USB Mass Storage devices [ 4.219517] usbcore: registered new interface driver usb-storage [ 4.219521] USB Mass Storage support registered. [ 4.219661] usb-storage: device found at 2 [ 4.219664] usb-storage: waiting for device to settle before scanning [ 4.440033] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 4.536388] ata1.00: configured for UDMA/66 [ 4.552257] ata1.01: configured for UDMA/66 [ 4.552940] ata1: EH complete [ 4.567447] sda5 [ 4.585355] usb 2-2: not running at top speed; connect to a high speed hub [ 4.586064] sda6 > [ 4.586959] sda: detected capacity change from 0 to 60022480896 [ 4.587073] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.598807] 8139too Fast Ethernet driver 0.9.28 [ 4.598876] 8139too 0000:00:09.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10 [ 4.599933] eth0: RealTek RTL8139 at 0xd800, 00:30:4f:20:b5:1e, IRQ 10 [ 4.626560] usb 2-2: configuration #1 chosen from 1 choice [ 4.756053] usb 4-1: new low speed USB device using uhci_hcd and address 2 [ 4.938839] usb 4-1: configuration #1 chosen from 1 choice [ 4.959086] usbcore: registered new interface driver hiddev [ 4.974273] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:11.2/usb4/4-1/4-1:1.0/input/input3 [ 4.974564] generic-usb 0003:045E:0039.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:11.2-1/input0 [ 4.974618] usbcore: registered new interface driver usbhid [ 4.974798] usbhid: v2.6:USB HID core driver [ 5.052039] usb 4-2: new low speed USB device using uhci_hcd and address 3 [ 5.227055] usb 4-2: configuration #1 chosen from 1 choice [ 5.246225] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:11.2/usb4/4-2/4-2:1.0/input/input4 [ 5.246940] generic-usb 0003:04F2:0116.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:11.2-2/input0 [ 6.072474] EXT4-fs (sdb6): mounted filesystem with ordered data mode [ 9.218975] usb-storage: device scan complete [ 9.220873] spurious 8259A interrupt: IRQ7. [ 9.225927] scsi 2:0:0:0: Direct-Access HP Photosmart Plus 1.00 PQ: 0 ANSI: 5 [ 9.228913] sd 2:0:0:0: Attached scsi generic sg4 type 0 [ 9.252922] sd 2:0:0:0: [sdd] Attached SCSI removable disk [ 22.028555] udev: starting version 151 [ 22.032791] Adding 320504k swap on /dev/sdb7. Priority:-1 extents:1 across:320504k [ 22.188981] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.239453] lp: driver loaded but no devices found [ 22.306454] Linux agpgart interface v0.103 [ 22.747723] irda_init() [ 22.747757] NET: Registered protocol family 23 [ 22.768967] parport_pc 00:09: reported by Plug and Play ACPI [ 22.769016] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 22.793099] agpgart: Detected VIA KT266/KY266x/KT333 chipset [ 22.824702] Linux video capture interface: v2.00 [ 22.848861] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xe0000000 [ 22.862756] type=1505 audit(1287860592.792:2): operation="profile_load" pid=487 name="/sbin/dhclient3" [ 22.863079] type=1505 audit(1287860592.792:3): operation="profile_load" pid=487 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 22.863276] type=1505 audit(1287860592.792:4): operation="profile_load" pid=487 name="/usr/lib/connman/scripts/dhclient-script" [ 22.865673] lp0: using parport0 (interrupt-driven). [ 22.955776] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7E11 [ 22.955812] usbcore: registered new interface driver usblp [ 23.049525] uvcvideo: Found UVC 1.00 device VF0610 Live! Cam Socialize HD (041e:4080) [ 23.050056] vga16fb: initializing [ 23.050066] vga16fb: mapped to 0xc00a0000 [ 23.050334] fb0: VGA16 VGA frame buffer device [ 23.062064] input: VF0610 Live! Cam Socialize HD as /devices/pci0000:00/0000:00:08.0/usb2/2-2/2-2:1.0/input/input5 [ 23.062201] usbcore: registered new interface driver uvcvideo [ 23.064711] USB Video Class driver (v0.1.0) [ 23.079196] ppdev: user-space parallel port driver [ 23.149285] gameport: EMU10K1 is pci0000:00:0d.1/gameport0, io 0xe000, speed 1193kHz [ 23.671327] EMU10K1_Audigy 0000:00:0d.0: PCI INT A -> Link[LNKB] -> GSI 12 (level, low) -> IRQ 12 [ 23.679191] Console: switching to colour frame buffer device 80x30 [ 23.934151] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 24.697971] 3:3:1: cannot get freq at ep 0x82 [ 24.758331] usbcore: registered new interface driver snd-usb-audio [ 25.827898] type=1505 audit(1287860595.756:5): operation="profile_load" pid=778 name="/usr/share/gdm/guest-session/Xsession" [ 25.851139] type=1505 audit(1287860595.780:6): operation="profile_replace" pid=780 name="/sbin/dhclient3" [ 25.851491] type=1505 audit(1287860595.780:7): operation="profile_replace" pid=780 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 25.851692] type=1505 audit(1287860595.780:8): operation="profile_replace" pid=780 name="/usr/lib/connman/scripts/dhclient-script" [ 25.897560] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 25.909992] type=1505 audit(1287860595.840:9): operation="profile_load" pid=781 name="/usr/bin/evince" [ 25.944457] type=1505 audit(1287860595.876:10): operation="profile_load" pid=781 name="/usr/bin/evince-previewer" [ 25.969836] type=1505 audit(1287860595.900:11): operation="profile_load" pid=781 name="/usr/bin/evince-thumbnailer" [ 26.980086] [drm] Initialized drm 1.1.0 20060810 [ 26.985072] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 26.986291] [drm] Initialized r128 2.5.0 20030725 for 0000:01:00.0 on minor 0 [ 26.987475] agpgart-via 0000:00:00.0: AGP 2.0 bridge [ 26.987504] agpgart-via 0000:00:00.0: putting AGP V2 device into 1x mode [ 26.987559] pci 0000:01:00.0: putting AGP V2 device into 1x mode [ 27.017691] platform r128_cce.0: firmware: requesting r128/r128_cce.bin [ 27.795277] usb 2-1: usbfs: interface 1 claimed by usblp while 'usb' sets config #1 [ 29.539016] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 29.539024] ata1.00: BMDMA stat 0x64 [ 29.539030] ata1.00: failed command: WRITE DMA [ 29.539038] ata1.00: cmd ca/00:00:fa:3c:d1/00:00:00:00:00/e4 tag 0 dma 131072 out [ 29.539039] res 51/84:00:fa:3c:d1/00:00:00:00:00/e4 Emask 0x10 (ATA bus error) [ 29.539043] ata1.00: status: { DRDY ERR } [ 29.539046] ata1.00: error: { ICRC ABRT } [ 29.539081] ata1: soft resetting link [ 29.884416] ata1.00: configured for UDMA/66 [ 29.900260] ata1.01: configured for UDMA/66 [ 29.900962] ata1: EH complete [ 30.043952] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 30.043958] ata1.00: BMDMA stat 0x64 [ 30.043964] ata1.00: failed command: WRITE DMA [ 30.043972] ata1.00: cmd ca/00:00:fa:3c:d1/00:00:00:00:00/e4 tag 0 dma 131072 out [ 30.043973] res 51/84:00:fa:3c:d1/00:00:00:00:00/e4 Emask 0x10 (ATA bus error) [ 30.043977] ata1.00: status: { DRDY ERR } [ 30.043980] ata1.00: error: { ICRC ABRT } [ 30.044032] ata1: soft resetting link [ 30.400414] ata1.00: configured for UDMA/66 [ 30.416260] ata1.01: configured for UDMA/66 [ 30.416970] ata1: EH complete [ 31.621938] 3:3:1: cannot get freq at ep 0x82 [ 32.769100] 3:3:1: cannot get freq at ep 0x82 [ 36.520033] eth0: no IPv6 routers present [ 60.858308] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 60.858316] ata1.00: BMDMA stat 0x64 [ 60.858322] ata1.00: failed command: WRITE DMA [ 60.858330] ata1.00: cmd ca/00:58:12:40:d1/00:00:00:00:00/e4 tag 0 dma 45056 out [ 60.858332] res 51/84:00:12:40:d1/00:00:00:00:00/e4 Emask 0x10 (ATA bus error) [ 60.858335] ata1.00: status: { DRDY ERR } [ 60.858338] ata1.00: error: { ICRC ABRT } [ 60.858375] ata1: soft resetting link [ 61.204405] ata1.00: configured for UDMA/66 [ 61.220261] ata1.01: configured for UDMA/66 [ 61.220962] ata1: EH complete [ 61.362569] ata1.00: limiting speed to UDMA/33:PIO4 [ 61.362577] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 61.362581] ata1.00: BMDMA stat 0x64 [ 61.362587] ata1.00: failed command: WRITE DMA [ 61.362595] ata1.00: cmd ca/00:58:12:40:d1/00:00:00:00:00/e4 tag 0 dma 45056 out [ 61.362596] res 51/84:00:12:40:d1/00:00:00:00:00/e4 Emask 0x10 (ATA bus error) [ 61.362600] ata1.00: status: { DRDY ERR } [ 61.362603] ata1.00: error: { ICRC ABRT } [ 61.362637] ata1: soft resetting link [ 61.716392] ata1.00: configured for UDMA/33 [ 61.732260] ata1.01: configured for UDMA/66 [ 61.732946] ata1: EH complete [ 202.217700] __ratelimit: 9 callbacks suppressed [ 202.217709] operapluginwrap[1470]: segfault at 0 ip (null) sp bfa023bc error 4 in libdl-2.11.1.so[110000+2000] [ 202.246288] operapluginwrap[1472]: segfault at 0 ip (null) sp bfe9c3cc error 4 in libX11.so.6.3.0[110000+119000] [ 202.299590] operapluginwrap[1477]: segfault at 0 ip (null) sp bf994e8c error 4 in libX11.so.6.3.0[110000+119000] [ 202.328273] operapluginwrap[1478]: segfault at 0 ip (null) sp bfc952cc error 4 in libtotem-narrowspace-plugin.so[110000+13000] [ 202.359736] operapluginwrap[1480]: segfault at 0 ip (null) sp bfdeef1c error 4 in libSM.so.6.0.1[110000+7000] [ 202.400720] operapluginwrap[1482]: segfault at 0 ip (null) sp bfba2d3c error 4 in libstdc++.so.6.0.13[110000+e9000] [ 202.437012] operapluginwrap[1484]: segfault at 0 ip (null) sp bff6ec3c error 4 in libX11.so.6.3.0[110000+119000] [ 202.473655] operapluginwrap[1486]: segfault at 0 ip (null) sp bff3245c error 4 in libX11.so.6.3.0[110000+119000] [ 1125.968227] operapluginwrap[1528] general protection ip:805fb5f sp:bfd4902c error:0 in operapluginwrapper[8048000+2b000] [ 1210.351133] operapluginwrap[1754] general protection ip:805fb5f sp:bfede60c error:0 in operapluginwrapper[8048000+2b000] [ 1410.969620] operapluginwrap[1775]: segfault at 486ccd75 ip 486ccd75 sp 486ccd75 error 4