!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16418.074678] =============>ARFR0+rate_index*4:0x100ff005
[16418.075422] ============>normal associate
[16418.076075] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16418.076081] ============>HTIOTActIsForcedRTSCTS(), 0
[16418.076084] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16418.077235] ===>ieee80211_associate_procedure_wq(), chan:11
[16418.127233] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16418.142163] =================>ieee80211_authentication_req():auth->algorithm is 0
[16418.147288] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16418.147290] 
[16418.147309] rtl819xU:qos active process with associate response received
[16418.147312] 
[16418.147320] Associated successfully
[16418.147323] Using G rates:108
[16418.147325] Successfully associated, ht enabled
[16418.197023] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16418.210990] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16418.213983] =============>ARFR0+rate_index*4:0x100ff005
[16418.214765] ============>normal associate
[16418.214969] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16418.214976] ============>HTIOTActIsForcedRTSCTS(), 0
[16418.214979] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16418.216709] ===>ieee80211_associate_procedure_wq(), chan:11
[16418.266529] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16418.281155] =================>ieee80211_authentication_req():auth->algorithm is 0
[16418.286504] Association response status code 0x1
[16418.286522] ===>ieee80211_associate_procedure_wq(), chan:11
[16418.336111] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16418.350950] =================>ieee80211_authentication_req():auth->algorithm is 0
[16418.375367] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16418.375370] 
[16418.375393] rtl819xU:qos active process with associate response received
[16418.375395] 
[16418.375404] Associated successfully
[16418.375407] Using G rates:108
[16418.375409] Successfully associated, ht enabled
[16418.424592] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16418.438419] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16418.441933] =============>ARFR0+rate_index*4:0x100ff005
[16418.442667] ============>normal associate
[16418.442875] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16418.442882] ============>HTIOTActIsForcedRTSCTS(), 0
[16418.442885] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16418.444436] ===>ieee80211_associate_procedure_wq(), chan:11
[16418.493215] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16418.507930] =================>ieee80211_authentication_req():auth->algorithm is 0
[16418.523658] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16418.523660] 
[16418.523674] rtl819xU:qos active process with associate response received
[16418.523677] 
[16418.523686] Associated successfully
[16418.523689] Using G rates:108
[16418.523691] Successfully associated, ht enabled
[16418.573240] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16418.587366] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16418.590445] =============>ARFR0+rate_index*4:0x100ff005
[16418.590941] ============>normal associate
[16418.591122] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16418.591128] ============>HTIOTActIsForcedRTSCTS(), 0
[16418.591131] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16418.592348] ===>ieee80211_associate_procedure_wq(), chan:11
[16418.641532] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16418.655466] =================>ieee80211_authentication_req():auth->algorithm is 0
[16418.660965] Association response status code 0x1
[16418.660984] ===>ieee80211_associate_procedure_wq(), chan:11
[16418.710359] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16418.724173] =================>ieee80211_authentication_req():auth->algorithm is 0
[16418.729573] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16418.729576] 
[16418.729587] rtl819xU:qos active process with associate response received
[16418.729590] 
[16418.729598] Associated successfully
[16418.729601] Using G rates:108
[16418.729603] Successfully associated, ht enabled
[16418.778848] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16418.792563] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16418.795396] =============>ARFR0+rate_index*4:0x100ff005
[16418.796179] ============>normal associate
[16418.796349] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16418.796356] ============>HTIOTActIsForcedRTSCTS(), 0
[16418.796359] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16418.797825] ===>ieee80211_associate_procedure_wq(), chan:11
[16418.847477] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16418.861758] =================>ieee80211_authentication_req():auth->algorithm is 0
[16418.867663] Association response status code 0x1
[16418.867682] ===>ieee80211_associate_procedure_wq(), chan:11
[16418.916722] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16418.930492] =================>ieee80211_authentication_req():auth->algorithm is 0
[16418.936801] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16418.936804] 
[16418.936823] rtl819xU:qos active process with associate response received
[16418.936825] 
[16418.936839] Associated successfully
[16418.936842] Using G rates:108
[16418.936844] Successfully associated, ht enabled
[16418.985879] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16418.999971] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16419.002715] =============>ARFR0+rate_index*4:0x100ff005
[16419.003494] ============>normal associate
[16419.004139] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16419.004146] ============>HTIOTActIsForcedRTSCTS(), 0
[16419.004149] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16419.005550] ===>ieee80211_associate_procedure_wq(), chan:11
[16419.055513] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16419.070198] =================>ieee80211_authentication_req():auth->algorithm is 0
[16419.075690] Association response status code 0x1
[16419.075704] ===>ieee80211_associate_procedure_wq(), chan:11
[16419.125375] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16419.139428] =================>ieee80211_authentication_req():auth->algorithm is 0
[16419.145672] Association response status code 0x1
[16419.145688] ===>ieee80211_associate_procedure_wq(), chan:11
[16419.195352] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16419.208947] =================>ieee80211_authentication_req():auth->algorithm is 0
[16419.214076] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16419.214079] 
[16419.214096] rtl819xU:qos active process with associate response received
[16419.214098] 
[16419.214107] Associated successfully
[16419.214109] Using G rates:108
[16419.214111] Successfully associated, ht enabled
[16419.263338] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16419.278300] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16419.282175] =============>ARFR0+rate_index*4:0x100ff005
[16419.283032] ============>normal associate
[16419.283322] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16419.283329] ============>HTIOTActIsForcedRTSCTS(), 0
[16419.283332] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16419.284964] ===>ieee80211_associate_procedure_wq(), chan:11
[16419.338576] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16419.354667] =================>ieee80211_authentication_req():auth->algorithm is 0
[16419.359891] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16419.359893] 
[16419.359907] rtl819xU:qos active process with associate response received
[16419.359909] 
[16419.359919] Associated successfully
[16419.359921] Using G rates:108
[16419.359923] Successfully associated, ht enabled
[16419.412153] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16419.426162] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16419.429744] =============>ARFR0+rate_index*4:0x100ff005
[16419.430479] ============>normal associate
[16419.430710] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16419.430717] ============>HTIOTActIsForcedRTSCTS(), 0
[16419.430720] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16419.431850] ===>ieee80211_associate_procedure_wq(), chan:11
[16419.481246] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16419.496132] =================>ieee80211_authentication_req():auth->algorithm is 0
[16419.503382] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16419.503384] 
[16419.503398] Associated successfully
[16419.503401] Using G rates:108
[16419.503403] Successfully associated, ht enabled
[16419.503419] rtl819xU:qos active process with associate response received
[16419.503421] 
[16419.553100] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16419.566665] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16419.569652] =============>ARFR0+rate_index*4:0x100ff005
[16419.570183] ============>normal associate
[16419.570400] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16419.570407] ============>HTIOTActIsForcedRTSCTS(), 0
[16419.570410] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16419.571800] ===>ieee80211_associate_procedure_wq(), chan:11
[16419.621208] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16419.636050] =================>ieee80211_authentication_req():auth->algorithm is 0
[16419.641302] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16419.641305] 
[16419.641323] rtl819xU:qos active process with associate response received
[16419.641326] 
[16419.641334] Associated successfully
[16419.641337] Using G rates:108
[16419.641339] Successfully associated, ht enabled
[16419.691323] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16419.705624] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16419.708863] =============>ARFR0+rate_index*4:0x100ff005
[16419.709360] ============>normal associate
[16419.709527] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16419.709534] ============>HTIOTActIsForcedRTSCTS(), 0
[16419.709537] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16419.710887] ===>ieee80211_associate_procedure_wq(), chan:11
[16419.760538] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16419.774919] =================>ieee80211_authentication_req():auth->algorithm is 0
[16419.780388] Association response status code 0x1
[16419.780406] ===>ieee80211_associate_procedure_wq(), chan:11
[16419.829404] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16419.843252] =================>ieee80211_authentication_req():auth->algorithm is 0
[16419.848626] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16419.848628] 
[16419.848639] rtl819xU:qos active process with associate response received
[16419.848642] 
[16419.848650] Associated successfully
[16419.848652] Using G rates:108
[16419.848654] Successfully associated, ht enabled
[16419.897507] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16419.911227] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16419.914686] =============>ARFR0+rate_index*4:0x100ff005
[16419.915182] ============>normal associate
[16419.915348] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16419.915354] ============>HTIOTActIsForcedRTSCTS(), 0
[16419.915358] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16419.916430] ===>ieee80211_associate_procedure_wq(), chan:11
[16419.966278] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16419.980700] =================>ieee80211_authentication_req():auth->algorithm is 0
[16419.985917] Association response status code 0x1
[16419.985933] ===>ieee80211_associate_procedure_wq(), chan:11
[16420.034702] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16420.048574] =================>ieee80211_authentication_req():auth->algorithm is 0
[16420.053693] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16420.053695] 
[16420.053711] rtl819xU:qos active process with associate response received
[16420.053713] 
[16420.053722] Associated successfully
[16420.053724] Using G rates:108
[16420.053726] Successfully associated, ht enabled
[16420.102588] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16420.116646] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16420.119756] =============>ARFR0+rate_index*4:0x100ff005
[16420.120511] ============>normal associate
[16420.121154] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16420.121160] ============>HTIOTActIsForcedRTSCTS(), 0
[16420.121163] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16420.122438] ===>ieee80211_associate_procedure_wq(), chan:11
[16420.172435] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16420.187083] =================>ieee80211_authentication_req():auth->algorithm is 0
[16420.192368] Association response status code 0x1
[16420.192385] ===>ieee80211_associate_procedure_wq(), chan:11
[16420.241414] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16420.255392] =================>ieee80211_authentication_req():auth->algorithm is 0
[16420.260510] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16420.260513] 
[16420.260528] rtl819xU:qos active process with associate response received
[16420.260530] 
[16420.260539] Associated successfully
[16420.260541] Using G rates:108
[16420.260543] Successfully associated, ht enabled
[16420.310245] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16420.324336] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16420.327323] =============>ARFR0+rate_index*4:0x100ff005
[16420.327821] ============>normal associate
[16420.328016] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16420.328023] ============>HTIOTActIsForcedRTSCTS(), 0
[16420.328026] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16420.329130] ===>ieee80211_associate_procedure_wq(), chan:11
[16420.379051] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16420.395463] =================>ieee80211_authentication_req():auth->algorithm is 0
[16420.400875] Association response status code 0x1
[16420.400891] ===>ieee80211_associate_procedure_wq(), chan:11
[16420.450228] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16420.464290] =================>ieee80211_authentication_req():auth->algorithm is 0
[16420.470318] Association response status code 0x1
[16420.470331] ===>ieee80211_associate_procedure_wq(), chan:11
[16420.523201] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16420.537143] =================>ieee80211_authentication_req():auth->algorithm is 0
[16420.542170] Association response status code 0x1
[16420.542188] ===>ieee80211_associate_procedure_wq(), chan:11
[16420.591907] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16420.605677] =================>ieee80211_authentication_req():auth->algorithm is 0
[16420.630039] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16420.630042] 
[16420.630067] rtl819xU:qos active process with associate response received
[16420.630069] 
[16420.630079] Associated successfully
[16420.630081] Using G rates:108
[16420.630083] Successfully associated, ht enabled
[16420.678976] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16420.693195] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16420.696180] =============>ARFR0+rate_index*4:0x100ff005
[16420.696678] ============>normal associate
[16420.696862] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16420.696869] ============>HTIOTActIsForcedRTSCTS(), 0
[16420.696872] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16420.697984] ===>ieee80211_associate_procedure_wq(), chan:11
[16420.748024] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16420.762741] =================>ieee80211_authentication_req():auth->algorithm is 0
[16420.767924] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16420.767926] 
[16420.767961] rtl819xU:qos active process with associate response received
[16420.767963] 
[16420.767977] Associated successfully
[16420.767980] Using G rates:108
[16420.767982] Successfully associated, ht enabled
[16420.817223] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16420.831187] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16420.834688] =============>ARFR0+rate_index*4:0x100ff005
[16420.835426] ============>normal associate
[16420.835636] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16420.835642] ============>HTIOTActIsForcedRTSCTS(), 0
[16420.835646] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16420.837042] ===>ieee80211_associate_procedure_wq(), chan:11
[16420.886227] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16420.905189] =================>ieee80211_authentication_req():auth->algorithm is 0
[16420.910497] Association response status code 0x1
[16420.912569] ===>ieee80211_associate_procedure_wq(), chan:11
[16420.961669] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16420.975385] =================>ieee80211_authentication_req():auth->algorithm is 0
[16420.981264] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16420.981266] 
[16420.981283] rtl819xU:qos active process with associate response received
[16420.981286] 
[16420.981294] Associated successfully
[16420.981297] Using G rates:108
[16420.981299] Successfully associated, ht enabled
[16421.030370] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16421.044376] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16421.047829] =============>ARFR0+rate_index*4:0x100ff005
[16421.048598] ============>normal associate
[16421.049246] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16421.049252] ============>HTIOTActIsForcedRTSCTS(), 0
[16421.049255] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16421.050381] ===>ieee80211_associate_procedure_wq(), chan:11
[16421.100366] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16421.115299] =================>ieee80211_authentication_req():auth->algorithm is 0
[16421.120871] Association response status code 0x1
[16421.120889] ===>ieee80211_associate_procedure_wq(), chan:11
[16421.170487] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16421.184335] =================>ieee80211_authentication_req():auth->algorithm is 0
[16421.189333] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16421.189335] 
[16421.189353] rtl819xU:qos active process with associate response received
[16421.189355] 
[16421.189363] Associated successfully
[16421.189366] Using G rates:108
[16421.189368] Successfully associated, ht enabled
[16421.239433] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16421.253687] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16421.257173] =============>ARFR0+rate_index*4:0x100ff005
[16421.257914] ============>normal associate
[16421.258085] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16421.258092] ============>HTIOTActIsForcedRTSCTS(), 0
[16421.258095] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16421.259324] ===>ieee80211_associate_procedure_wq(), chan:11
[16421.312677] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16421.328179] =================>ieee80211_authentication_req():auth->algorithm is 0
[16421.334109] Association response status code 0x1
[16421.334124] ===>ieee80211_associate_procedure_wq(), chan:11
[16421.387433] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16421.402620] =================>ieee80211_authentication_req():auth->algorithm is 0
[16421.407868] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16421.407870] 
[16421.407883] rtl819xU:qos active process with associate response received
[16421.407885] 
[16421.407894] Associated successfully
[16421.407897] Using G rates:108
[16421.407899] Successfully associated, ht enabled
[16421.457386] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16421.471097] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16421.474604] =============>ARFR0+rate_index*4:0x100ff005
[16421.475343] ============>normal associate
[16421.475568] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16421.475574] ============>HTIOTActIsForcedRTSCTS(), 0
[16421.475578] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16421.476710] ===>ieee80211_associate_procedure_wq(), chan:11
[16421.526541] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16421.541268] =================>ieee80211_authentication_req():auth->algorithm is 0
[16421.546572] Association response status code 0x1
[16421.546587] ===>ieee80211_associate_procedure_wq(), chan:11
[16421.595815] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16421.609907] =================>ieee80211_authentication_req():auth->algorithm is 0
[16421.615316] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16421.615318] 
[16421.615330] rtl819xU:qos active process with associate response received
[16421.615333] 
[16421.615341] Associated successfully
[16421.615344] Using G rates:108
[16421.615346] Successfully associated, ht enabled
[16421.664206] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16421.678014] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16421.681547] =============>ARFR0+rate_index*4:0x100ff005
[16421.682287] ============>normal associate
[16421.682489] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16421.682496] ============>HTIOTActIsForcedRTSCTS(), 0
[16421.682499] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16421.683906] ===>ieee80211_associate_procedure_wq(), chan:11
[16421.733213] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16421.748805] =================>ieee80211_authentication_req():auth->algorithm is 0
[16421.756885] Association response status code 0x1
[16421.756903] ===>ieee80211_associate_procedure_wq(), chan:11
[16421.806035] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16421.820128] =================>ieee80211_authentication_req():auth->algorithm is 0
[16421.825369] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16421.825371] 
[16421.825383] rtl819xU:qos active process with associate response received
[16421.825385] 
[16421.825393] Associated successfully
[16421.825396] Using G rates:108
[16421.825398] Successfully associated, ht enabled
[16421.874643] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16421.888357] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16421.891842] =============>ARFR0+rate_index*4:0x100ff005
[16421.892594] ============>normal associate
[16421.892866] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16421.892873] ============>HTIOTActIsForcedRTSCTS(), 0
[16421.892876] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16421.893938] ===>ieee80211_associate_procedure_wq(), chan:11
[16421.944019] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16421.958988] =================>ieee80211_authentication_req():auth->algorithm is 0
[16421.964339] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16421.964342] 
[16421.964359] Associated successfully
[16421.964362] Using G rates:108
[16421.964365] Successfully associated, ht enabled
[16421.964376] rtl819xU:qos active process with associate response received
[16421.964378] 
[16422.012816] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16422.026540] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16422.029821] =============>ARFR0+rate_index*4:0x100ff005
[16422.030553] ============>normal associate
[16422.031203] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16422.031209] ============>HTIOTActIsForcedRTSCTS(), 0
[16422.031212] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16422.032454] ===>ieee80211_associate_procedure_wq(), chan:11
[16422.081958] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16422.096414] =================>ieee80211_authentication_req():auth->algorithm is 0
[16422.101806] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16422.101809] 
[16422.101827] rtl819xU:qos active process with associate response received
[16422.101830] 
[16422.101838] Associated successfully
[16422.101841] Using G rates:108
[16422.101843] Successfully associated, ht enabled
[16422.151190] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16422.165404] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16422.168906] =============>ARFR0+rate_index*4:0x100ff005
[16422.169646] ============>normal associate
[16422.169849] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16422.169856] ============>HTIOTActIsForcedRTSCTS(), 0
[16422.169859] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16422.170916] ===>ieee80211_associate_procedure_wq(), chan:11
[16422.220701] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16422.236000] =================>ieee80211_authentication_req():auth->algorithm is 0
[16422.241503] Association response status code 0x1
[16422.241517] ===>ieee80211_associate_procedure_wq(), chan:11
[16422.291519] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16422.305334] =================>ieee80211_authentication_req():auth->algorithm is 0
[16422.310487] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16422.310489] 
[16422.310501] rtl819xU:qos active process with associate response received
[16422.310503] 
[16422.310512] Associated successfully
[16422.310515] Using G rates:108
[16422.310517] Successfully associated, ht enabled
[16422.359502] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16422.373315] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16422.376805] =============>ARFR0+rate_index*4:0x100ff005
[16422.377588] ============>normal associate
[16422.377809] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16422.377816] ============>HTIOTActIsForcedRTSCTS(), 0
[16422.377819] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16422.378951] ===>ieee80211_associate_procedure_wq(), chan:11
[16422.428849] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16422.443760] =================>ieee80211_authentication_req():auth->algorithm is 0
[16422.449203] Association response status code 0x1
[16422.449218] ===>ieee80211_associate_procedure_wq(), chan:11
[16422.498604] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16422.512682] =================>ieee80211_authentication_req():auth->algorithm is 0
[16422.517774] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16422.517777] 
[16422.517791] rtl819xU:qos active process with associate response received
[16422.517793] 
[16422.517800] Associated successfully
[16422.517803] Using G rates:108
[16422.517805] Successfully associated, ht enabled
[16422.566832] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16422.580885] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16422.583917] =============>ARFR0+rate_index*4:0x100ff005
[16422.584503] ============>normal associate
[16422.584701] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16422.584708] ============>HTIOTActIsForcedRTSCTS(), 0
[16422.584711] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16422.585801] ===>ieee80211_associate_procedure_wq(), chan:11
[16422.635205] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16422.650139] =================>ieee80211_authentication_req():auth->algorithm is 0
[16422.655421] Association response status code 0x1
[16422.655437] ===>ieee80211_associate_procedure_wq(), chan:11
[16422.705627] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16422.719629] =================>ieee80211_authentication_req():auth->algorithm is 0
[16422.724846] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16422.724848] 
[16422.724863] rtl819xU:qos active process with associate response received
[16422.724865] 
[16422.724873] Associated successfully
[16422.724875] Using G rates:108
[16422.724877] Successfully associated, ht enabled
[16422.774769] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16422.788478] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16422.791968] =============>ARFR0+rate_index*4:0x100ff005
[16422.792717] ============>normal associate
[16422.792928] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16422.792935] ============>HTIOTActIsForcedRTSCTS(), 0
[16422.792938] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16422.794100] ===>ieee80211_associate_procedure_wq(), chan:11
[16422.844279] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16422.858496] =================>ieee80211_authentication_req():auth->algorithm is 0
[16422.863986] Association response status code 0x1
[16422.864001] ===>ieee80211_associate_procedure_wq(), chan:11
[16422.913847] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16422.928535] =================>ieee80211_authentication_req():auth->algorithm is 0
[16422.968030] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16422.968032] 
[16422.968047] rtl819xU:qos active process with associate response received
[16422.968049] 
[16422.968059] Associated successfully
[16422.968061] Using G rates:108
[16422.968063] Successfully associated, ht enabled
[16423.017764] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16423.031483] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16423.034698] =============>ARFR0+rate_index*4:0x100ff005
[16423.035467] ============>normal associate
[16423.064194] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16423.064201] ============>HTIOTActIsForcedRTSCTS(), 0
[16423.064204] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16423.065463] ===>ieee80211_associate_procedure_wq(), chan:11
[16423.115168] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16423.130389] =================>ieee80211_authentication_req():auth->algorithm is 0
[16423.135798] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16423.135801] 
[16423.135819] rtl819xU:qos active process with associate response received
[16423.135822] 
[16423.135830] Associated successfully
[16423.135833] Using G rates:108
[16423.135840] Successfully associated, ht enabled
[16423.185398] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16423.199124] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16423.202116] =============>ARFR0+rate_index*4:0x100ff005
[16423.202592] ============>normal associate
[16423.202727] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16423.202734] ============>HTIOTActIsForcedRTSCTS(), 0
[16423.202737] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16423.203928] ===>ieee80211_associate_procedure_wq(), chan:11
[16423.253255] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16423.268881] =================>ieee80211_authentication_req():auth->algorithm is 0
[16423.276123] Association response status code 0x1
[16423.276139] ===>ieee80211_associate_procedure_wq(), chan:11
[16423.329234] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16423.344323] =================>ieee80211_authentication_req():auth->algorithm is 0
[16423.349947] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16423.349949] 
[16423.349961] rtl819xU:qos active process with associate response received
[16423.349963] 
[16423.349972] Associated successfully
[16423.349975] Using G rates:108
[16423.349977] Successfully associated, ht enabled
[16423.402192] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16423.416766] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16423.420049] =============>ARFR0+rate_index*4:0x100ff005
[16423.420788] ============>normal associate
[16423.421010] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16423.421017] ============>HTIOTActIsForcedRTSCTS(), 0
[16423.421020] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16423.422179] ===>ieee80211_associate_procedure_wq(), chan:11
[16423.471426] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16423.485941] =================>ieee80211_authentication_req():auth->algorithm is 0
[16423.492750] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16423.492752] 
[16423.492766] rtl819xU:qos active process with associate response received
[16423.492768] 
[16423.492776] Associated successfully
[16423.492778] Using G rates:108
[16423.492781] Successfully associated, ht enabled
[16423.542543] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16423.556475] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16423.559885] =============>ARFR0+rate_index*4:0x100ff005
[16423.560626] ============>normal associate
[16423.560800] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16423.560806] ============>HTIOTActIsForcedRTSCTS(), 0
[16423.560810] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16423.562144] ===>ieee80211_associate_procedure_wq(), chan:11
[16423.611887] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16423.627270] =================>ieee80211_authentication_req():auth->algorithm is 0
[16423.632365] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16423.632368] 
[16423.632387] rtl819xU:qos active process with associate response received
[16423.632389] 
[16423.632398] Associated successfully
[16423.632400] Using G rates:108
[16423.632402] Successfully associated, ht enabled
[16423.682625] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16423.696851] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16423.700325] =============>ARFR0+rate_index*4:0x100ff005
[16423.701083] ============>normal associate
[16423.701259] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16423.701265] ============>HTIOTActIsForcedRTSCTS(), 0
[16423.701269] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16423.702539] ===>ieee80211_associate_procedure_wq(), chan:11
[16423.751512] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16423.765537] =================>ieee80211_authentication_req():auth->algorithm is 0
[16423.770779] Association response status code 0x1
[16423.770794] ===>ieee80211_associate_procedure_wq(), chan:11
[16423.820356] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16423.834683] =================>ieee80211_authentication_req():auth->algorithm is 0
[16423.841446] Association response status code 0x1
[16423.841458] ===>ieee80211_associate_procedure_wq(), chan:11
[16423.890692] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16423.904500] =================>ieee80211_authentication_req():auth->algorithm is 0
[16423.909535] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16423.909537] 
[16423.909548] rtl819xU:qos active process with associate response received
[16423.909551] 
[16423.909559] Associated successfully
[16423.909562] Using G rates:108
[16423.909564] Successfully associated, ht enabled
[16423.958641] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16423.972358] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16423.975890] =============>ARFR0+rate_index*4:0x100ff005
[16423.976629] ============>normal associate
[16423.977278] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16423.977285] ============>HTIOTActIsForcedRTSCTS(), 0
[16423.977288] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16423.978371] ===>ieee80211_associate_procedure_wq(), chan:11
[16424.028393] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16424.043866] =================>ieee80211_authentication_req():auth->algorithm is 0
[16424.048984] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16424.048987] 
[16424.049002] rtl819xU:qos active process with associate response received
[16424.049005] 
[16424.049013] Associated successfully
[16424.049016] Using G rates:108
[16424.049018] Successfully associated, ht enabled
[16424.098020] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16424.111942] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16424.115477] =============>ARFR0+rate_index*4:0x100ff005
[16424.116217] ============>normal associate
[16424.116386] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16424.116393] ============>HTIOTActIsForcedRTSCTS(), 0
[16424.116396] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16424.117579] ===>ieee80211_associate_procedure_wq(), chan:11
[16424.167201] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16424.181770] =================>ieee80211_authentication_req():auth->algorithm is 0
[16424.187197] Association response status code 0x1
[16424.187216] ===>ieee80211_associate_procedure_wq(), chan:11
[16424.236468] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16424.250191] =================>ieee80211_authentication_req():auth->algorithm is 0
[16424.255449] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16424.255451] 
[16424.255463] rtl819xU:qos active process with associate response received
[16424.255465] 
[16424.255474] Associated successfully
[16424.255476] Using G rates:108
[16424.255478] Successfully associated, ht enabled
[16424.304943] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16424.318680] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16424.321878] =============>ARFR0+rate_index*4:0x100ff005
[16424.322660] ============>normal associate
[16424.322868] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16424.322875] ============>HTIOTActIsForcedRTSCTS(), 0
[16424.322878] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16424.324335] ===>ieee80211_associate_procedure_wq(), chan:11
[16424.374673] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16424.394105] =================>ieee80211_authentication_req():auth->algorithm is 0
[16424.401160] Association response status code 0x1
[16424.401176] ===>ieee80211_associate_procedure_wq(), chan:11
[16424.454402] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16424.468111] =================>ieee80211_authentication_req():auth->algorithm is 0
[16424.473482] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16424.473484] 
[16424.473496] rtl819xU:qos active process with associate response received
[16424.473498] 
[16424.473507] Associated successfully
[16424.473509] Using G rates:108
[16424.473511] Successfully associated, ht enabled
[16424.523125] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16424.537057] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16424.540710] =============>ARFR0+rate_index*4:0x100ff005
[16424.541446] ============>normal associate
[16424.541662] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16424.541669] ============>HTIOTActIsForcedRTSCTS(), 0
[16424.541672] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16424.543324] ===>ieee80211_associate_procedure_wq(), chan:11
[16424.593245] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16424.607349] =================>ieee80211_authentication_req():auth->algorithm is 0
[16424.612532] Association response status code 0x1
[16424.612548] ===>ieee80211_associate_procedure_wq(), chan:11
[16424.661328] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16424.675067] =================>ieee80211_authentication_req():auth->algorithm is 0
[16424.680798] Association response status code 0x1
[16424.680817] ===>ieee80211_associate_procedure_wq(), chan:11
[16424.730068] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16424.744250] =================>ieee80211_authentication_req():auth->algorithm is 0
[16424.749374] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16424.749376] 
[16424.749387] rtl819xU:qos active process with associate response received
[16424.749389] 
[16424.749396] Associated successfully
[16424.749398] Using G rates:108
[16424.749400] Successfully associated, ht enabled
[16424.798678] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16424.812607] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16424.815890] =============>ARFR0+rate_index*4:0x100ff005
[16424.816630] ============>normal associate
[16424.816834] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16424.816841] ============>HTIOTActIsForcedRTSCTS(), 0
[16424.816844] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16424.818117] ===>ieee80211_associate_procedure_wq(), chan:11
[16424.867435] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16424.882648] =================>ieee80211_authentication_req():auth->algorithm is 0
[16424.888113] Association response status code 0x1
[16424.888131] ===>ieee80211_associate_procedure_wq(), chan:11
[16424.944114] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16424.958349] =================>ieee80211_authentication_req():auth->algorithm is 0
[16424.966955] Association response status code 0x1
[16424.966968] ===>ieee80211_associate_procedure_wq(), chan:11
[16425.015938] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16425.029695] =================>ieee80211_authentication_req():auth->algorithm is 0
[16425.034943] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16425.034945] 
[16425.034957] rtl819xU:qos active process with associate response received
[16425.034959] 
[16425.034968] Associated successfully
[16425.034971] Using G rates:108
[16425.034973] Successfully associated, ht enabled
[16425.084541] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16425.098456] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16425.101377] =============>ARFR0+rate_index*4:0x100ff005
[16425.102161] ============>normal associate
[16425.102811] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16425.102817] ============>HTIOTActIsForcedRTSCTS(), 0
[16425.102821] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16425.104057] ===>ieee80211_associate_procedure_wq(), chan:11
[16425.154173] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16425.168810] =================>ieee80211_authentication_req():auth->algorithm is 0
[16425.174401] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16425.174404] 
[16425.174416] rtl819xU:qos active process with associate response received
[16425.174418] 
[16425.174427] Associated successfully
[16425.174430] Using G rates:108
[16425.174432] Successfully associated, ht enabled
[16425.224002] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16425.237969] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16425.241463] =============>ARFR0+rate_index*4:0x100ff005
[16425.242241] ============>normal associate
[16425.242527] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16425.242534] ============>HTIOTActIsForcedRTSCTS(), 0
[16425.242537] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16425.243642] ===>ieee80211_associate_procedure_wq(), chan:11
[16425.294408] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16425.310756] =================>ieee80211_authentication_req():auth->algorithm is 0
[16425.316342] Association response status code 0x1
[16425.316360] ===>ieee80211_associate_procedure_wq(), chan:11
[16425.369229] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16425.384195] =================>ieee80211_authentication_req():auth->algorithm is 0
[16425.389340] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16425.389343] 
[16425.389355] rtl819xU:qos active process with associate response received
[16425.389357] 
[16425.389365] Associated successfully
[16425.389368] Using G rates:108
[16425.389370] Successfully associated, ht enabled
[16425.443945] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16425.457688] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16425.461171] =============>ARFR0+rate_index*4:0x100ff005
[16425.461909] ============>normal associate
[16425.462219] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16425.462226] ============>HTIOTActIsForcedRTSCTS(), 0
[16425.462229] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16425.463277] ===>ieee80211_associate_procedure_wq(), chan:11
[16425.513083] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16425.527391] =================>ieee80211_authentication_req():auth->algorithm is 0
[16425.532522] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16425.532524] 
[16425.532541] rtl819xU:qos active process with associate response received
[16425.532543] 
[16425.532553] Associated successfully
[16425.532555] Using G rates:108
[16425.532557] Successfully associated, ht enabled
[16425.582006] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16425.596134] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16425.599340] =============>ARFR0+rate_index*4:0x100ff005
[16425.600124] ============>normal associate
[16425.600299] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16425.600306] ============>HTIOTActIsForcedRTSCTS(), 0
[16425.600309] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16425.601641] ===>ieee80211_associate_procedure_wq(), chan:11
[16425.651798] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16425.666019] =================>ieee80211_authentication_req():auth->algorithm is 0
[16425.671357] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16425.671360] 
[16425.671378] rtl819xU:qos active process with associate response received
[16425.671381] 
[16425.671389] Associated successfully
[16425.671392] Using G rates:108
[16425.671394] Successfully associated, ht enabled
[16425.721244] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16425.735435] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16425.738176] =============>ARFR0+rate_index*4:0x100ff005
[16425.738957] ============>normal associate
[16425.739258] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16425.739264] ============>HTIOTActIsForcedRTSCTS(), 0
[16425.739267] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16425.740323] ===>ieee80211_associate_procedure_wq(), chan:11
[16425.789883] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16425.804816] =================>ieee80211_authentication_req():auth->algorithm is 0
[16425.810188] Association response status code 0x1
[16425.810208] ===>ieee80211_associate_procedure_wq(), chan:11
[16425.859821] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16425.873896] =================>ieee80211_authentication_req():auth->algorithm is 0
[16425.879271] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16425.879274] 
[16425.879285] rtl819xU:qos active process with associate response received
[16425.879288] 
[16425.879295] Associated successfully
[16425.879297] Using G rates:108
[16425.879299] Successfully associated, ht enabled
[16425.931931] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16425.945657] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16425.949109] =============>ARFR0+rate_index*4:0x100ff005
[16425.949605] ============>normal associate
[16425.971373] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16425.971379] ============>HTIOTActIsForcedRTSCTS(), 0
[16425.971382] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16425.972649] ===>ieee80211_associate_procedure_wq(), chan:11
[16426.023147] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16426.037741] =================>ieee80211_authentication_req():auth->algorithm is 0
[16426.042924] Association response status code 0x1
[16426.042939] ===>ieee80211_associate_procedure_wq(), chan:11
[16426.092605] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16426.106315] =================>ieee80211_authentication_req():auth->algorithm is 0
[16426.111652] Association response status code 0x1
[16426.111668] ===>ieee80211_associate_procedure_wq(), chan:11
[16426.160711] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16426.174395] =================>ieee80211_authentication_req():auth->algorithm is 0
[16426.198777] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16426.198780] 
[16426.198794] rtl819xU:qos active process with associate response received
[16426.198797] 
[16426.198805] Associated successfully
[16426.198808] Using G rates:108
[16426.198810] Successfully associated, ht enabled
[16426.248148] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16426.261712] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16426.264699] =============>ARFR0+rate_index*4:0x100ff005
[16426.265197] ============>normal associate
[16426.265395] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16426.265401] ============>HTIOTActIsForcedRTSCTS(), 0
[16426.265404] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16426.266722] ===>ieee80211_associate_procedure_wq(), chan:11
[16426.316530] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16426.330753] =================>ieee80211_authentication_req():auth->algorithm is 0
[16426.336095] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16426.336098] 
[16426.336114] rtl819xU:qos active process with associate response received
[16426.336117] 
[16426.336125] Associated successfully
[16426.336128] Using G rates:108
[16426.336130] Successfully associated, ht enabled
[16426.386003] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16426.400075] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16426.407691] =============>ARFR0+rate_index*4:0x100ff005
[16426.408439] ============>normal associate
[16426.408626] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16426.408633] ============>HTIOTActIsForcedRTSCTS(), 0
[16426.408636] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16426.409802] ===>ieee80211_associate_procedure_wq(), chan:11
[16426.459982] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16426.474574] =================>ieee80211_authentication_req():auth->algorithm is 0
[16426.479955] Association response status code 0x1
[16426.479971] ===>ieee80211_associate_procedure_wq(), chan:11
[16426.529563] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16426.543651] =================>ieee80211_authentication_req():auth->algorithm is 0
[16426.549167] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16426.549170] 
[16426.549182] rtl819xU:qos active process with associate response received
[16426.549185] 
[16426.549193] Associated successfully
[16426.549196] Using G rates:108
[16426.549198] Successfully associated, ht enabled
[16426.598265] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16426.612144] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16426.615258] =============>ARFR0+rate_index*4:0x100ff005
[16426.615749] ============>normal associate
[16426.615922] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16426.615928] ============>HTIOTActIsForcedRTSCTS(), 0
[16426.615931] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16426.617056] ===>ieee80211_associate_procedure_wq(), chan:11
[16426.667310] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16426.681647] =================>ieee80211_authentication_req():auth->algorithm is 0
[16426.686993] Association response status code 0x1
[16426.687012] ===>ieee80211_associate_procedure_wq(), chan:11
[16426.735893] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16426.749946] =================>ieee80211_authentication_req():auth->algorithm is 0
[16426.755356] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16426.755358] 
[16426.755370] rtl819xU:qos active process with associate response received
[16426.755372] 
[16426.755381] Associated successfully
[16426.755384] Using G rates:108
[16426.755386] Successfully associated, ht enabled
[16426.803962] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16426.818075] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16426.821585] =============>ARFR0+rate_index*4:0x100ff005
[16426.822325] ============>normal associate
[16426.822533] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16426.822540] ============>HTIOTActIsForcedRTSCTS(), 0
[16426.822543] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16426.823691] ===>ieee80211_associate_procedure_wq(), chan:11
[16426.873590] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16426.888097] =================>ieee80211_authentication_req():auth->algorithm is 0
[16426.893556] Association response status code 0x1
[16426.893571] ===>ieee80211_associate_procedure_wq(), chan:11
[16426.943206] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16426.957386] =================>ieee80211_authentication_req():auth->algorithm is 0
[16426.962673] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16426.962675] 
[16426.962687] rtl819xU:qos active process with associate response received
[16426.962689] 
[16426.962697] Associated successfully
[16426.962700] Using G rates:108
[16426.962702] Successfully associated, ht enabled
[16427.011901] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16427.025868] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16427.029402] =============>ARFR0+rate_index*4:0x100ff005
[16427.030142] ============>normal associate
[16427.030788] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16427.030794] ============>HTIOTActIsForcedRTSCTS(), 0
[16427.030797] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16427.032160] ===>ieee80211_associate_procedure_wq(), chan:11
[16427.082276] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16427.097539] =================>ieee80211_authentication_req():auth->algorithm is 0
[16427.102791] Association response status code 0x1
[16427.102811] ===>ieee80211_associate_procedure_wq(), chan:11
[16427.152397] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16427.166328] =================>ieee80211_authentication_req():auth->algorithm is 0
[16427.173604] Association response status code 0x1
[16427.173617] ===>ieee80211_associate_procedure_wq(), chan:11
[16427.221837] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16427.236140] =================>ieee80211_authentication_req():auth->algorithm is 0
[16427.241431] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16427.241434] 
[16427.241447] rtl819xU:qos active process with associate response received
[16427.241449] 
[16427.241457] Associated successfully
[16427.241459] Using G rates:108
[16427.241461] Successfully associated, ht enabled
[16427.291601] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16427.307192] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16427.311270] =============>ARFR0+rate_index*4:0x100ff005
[16427.312015] ============>normal associate
[16427.312306] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16427.312313] ============>HTIOTActIsForcedRTSCTS(), 0
[16427.312316] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16427.313419] ===>ieee80211_associate_procedure_wq(), chan:11
[16427.367312] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16427.383965] =================>ieee80211_authentication_req():auth->algorithm is 0
[16427.389189] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16427.389192] 
[16427.389206] rtl819xU:qos active process with associate response received
[16427.389209] 
[16427.389218] Associated successfully
[16427.389225] Using G rates:108
[16427.389227] Successfully associated, ht enabled
[16427.441282] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16427.455002] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16427.458507] =============>ARFR0+rate_index*4:0x100ff005
[16427.459247] ============>normal associate
[16427.459557] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16427.459564] ============>HTIOTActIsForcedRTSCTS(), 0
[16427.459567] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16427.460646] ===>ieee80211_associate_procedure_wq(), chan:11
[16427.510920] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16427.525728] =================>ieee80211_authentication_req():auth->algorithm is 0
[16427.533522] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16427.533524] 
[16427.533537] Associated successfully
[16427.533541] Using G rates:108
[16427.533543] Successfully associated, ht enabled
[16427.533558] rtl819xU:qos active process with associate response received
[16427.533561] 
[16427.583124] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16427.597223] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16427.600729] =============>ARFR0+rate_index*4:0x100ff005
[16427.601453] ============>normal associate
[16427.601645] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16427.601652] ============>HTIOTActIsForcedRTSCTS(), 0
[16427.601655] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16427.602853] ===>ieee80211_associate_procedure_wq(), chan:11
[16427.652756] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16427.667100] =================>ieee80211_authentication_req():auth->algorithm is 0
[16427.672445] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16427.672447] 
[16427.672466] rtl819xU:qos active process with associate response received
[16427.672468] 
[16427.672477] Associated successfully
[16427.672480] Using G rates:108
[16427.672482] Successfully associated, ht enabled
[16427.721719] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16427.735640] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16427.739172] =============>ARFR0+rate_index*4:0x100ff005
[16427.739912] ============>normal associate
[16427.740121] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16427.740128] ============>HTIOTActIsForcedRTSCTS(), 0
[16427.740131] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16427.741275] ===>ieee80211_associate_procedure_wq(), chan:11
[16427.790303] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16427.804816] =================>ieee80211_authentication_req():auth->algorithm is 0
[16427.810272] Association response status code 0x1
[16427.810289] ===>ieee80211_associate_procedure_wq(), chan:11
[16427.859542] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16427.873506] =================>ieee80211_authentication_req():auth->algorithm is 0
[16427.878888] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16427.878890] 
[16427.878902] rtl819xU:qos active process with associate response received
[16427.878904] 
[16427.878913] Associated successfully
[16427.878915] Using G rates:108
[16427.878917] Successfully associated, ht enabled
[16427.928277] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16427.941955] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16427.945480] =============>ARFR0+rate_index*4:0x100ff005
[16427.946229] ============>normal associate
[16427.983436] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16427.983442] ============>HTIOTActIsForcedRTSCTS(), 0
[16427.983445] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16427.984709] ===>ieee80211_associate_procedure_wq(), chan:11
[16428.034829] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16428.051758] =================>ieee80211_authentication_req():auth->algorithm is 0
[16428.058144] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16428.058146] 
[16428.058167] rtl819xU:qos active process with associate response received
[16428.058169] 
[16428.058178] Associated successfully
[16428.058181] Using G rates:108
[16428.058183] Successfully associated, ht enabled
[16428.107908] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16428.121761] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16428.124952] =============>ARFR0+rate_index*4:0x100ff005
[16428.125735] ============>normal associate
[16428.125914] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16428.125921] ============>HTIOTActIsForcedRTSCTS(), 0
[16428.125924] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16428.127222] ===>ieee80211_associate_procedure_wq(), chan:11
[16428.176654] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16428.191024] =================>ieee80211_authentication_req():auth->algorithm is 0
[16428.196223] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16428.196225] 
[16428.196242] rtl819xU:qos active process with associate response received
[16428.196245] 
[16428.196254] Associated successfully
[16428.196256] Using G rates:108
[16428.196258] Successfully associated, ht enabled
[16428.246127] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16428.260046] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16428.263288] =============>ARFR0+rate_index*4:0x100ff005
[16428.264071] ============>normal associate
[16428.264277] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16428.264283] ============>HTIOTActIsForcedRTSCTS(), 0
[16428.264287] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16428.265624] ===>ieee80211_associate_procedure_wq(), chan:11
[16428.315802] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16428.330463] =================>ieee80211_authentication_req():auth->algorithm is 0
[16428.337427] Association response status code 0x1
[16428.337445] ===>ieee80211_associate_procedure_wq(), chan:11
[16428.386539] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16428.403699] =================>ieee80211_authentication_req():auth->algorithm is 0
[16428.409044] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16428.409046] 
[16428.409059] rtl819xU:qos active process with associate response received
[16428.409061] 
[16428.409070] Associated successfully
[16428.409073] Using G rates:108
[16428.409075] Successfully associated, ht enabled
[16428.458662] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16428.472479] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16428.476012] =============>ARFR0+rate_index*4:0x100ff005
[16428.476751] ============>normal associate
[16428.476967] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16428.476974] ============>HTIOTActIsForcedRTSCTS(), 0
[16428.476977] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16428.478491] ===>ieee80211_associate_procedure_wq(), chan:11
[16428.528068] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16428.542578] =================>ieee80211_authentication_req():auth->algorithm is 0
[16428.547949] Association response status code 0x1
[16428.547966] ===>ieee80211_associate_procedure_wq(), chan:11
[16428.596475] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16428.610488] =================>ieee80211_authentication_req():auth->algorithm is 0
[16428.615938] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16428.615940] 
[16428.615956] rtl819xU:qos active process with associate response received
[16428.615958] 
[16428.615965] Associated successfully
[16428.615968] Using G rates:108
[16428.615970] Successfully associated, ht enabled
[16428.665357] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16428.679298] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16428.682291] =============>ARFR0+rate_index*4:0x100ff005
[16428.683076] ============>normal associate
[16428.683322] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16428.683329] ============>HTIOTActIsForcedRTSCTS(), 0
[16428.683332] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16428.684500] ===>ieee80211_associate_procedure_wq(), chan:11
[16428.734433] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16428.752270] =================>ieee80211_authentication_req():auth->algorithm is 0
[16428.758296] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16428.758299] 
[16428.758318] Associated successfully
[16428.758321] Using G rates:108
[16428.758323] Successfully associated, ht enabled
[16428.758334] rtl819xU:qos active process with associate response received
[16428.758336] 
[16428.807320] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16428.821254] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16428.824784] =============>ARFR0+rate_index*4:0x100ff005
[16428.825488] ============>normal associate
[16428.825689] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16428.825695] ============>HTIOTActIsForcedRTSCTS(), 0
[16428.825698] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16428.827135] ===>ieee80211_associate_procedure_wq(), chan:11
[16428.876949] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16428.891168] =================>ieee80211_authentication_req():auth->algorithm is 0
[16428.896654] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16428.896657] 
[16428.896673] rtl819xU:qos active process with associate response received
[16428.896675] 
[16428.896684] Associated successfully
[16428.896687] Using G rates:108
[16428.896689] Successfully associated, ht enabled
[16428.950144] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16428.964580] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16428.968112] =============>ARFR0+rate_index*4:0x100ff005
[16428.968851] ============>normal associate
[16428.991306] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16428.991313] ============>HTIOTActIsForcedRTSCTS(), 0
[16428.991316] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16428.992559] ===>ieee80211_associate_procedure_wq(), chan:11
[16429.042477] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16429.056591] =================>ieee80211_authentication_req():auth->algorithm is 0
[16429.064134] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16429.064136] 
[16429.064150] rtl819xU:qos active process with associate response received
[16429.064152] 
[16429.064160] Associated successfully
[16429.064162] Using G rates:108
[16429.064164] Successfully associated, ht enabled
[16429.113644] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16429.127903] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16429.131105] =============>ARFR0+rate_index*4:0x100ff005
[16429.131889] ============>normal associate
[16429.132097] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16429.132103] ============>HTIOTActIsForcedRTSCTS(), 0
[16429.132107] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16429.133563] ===>ieee80211_associate_procedure_wq(), chan:11
[16429.183372] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16429.197867] =================>ieee80211_authentication_req():auth->algorithm is 0
[16429.203010] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16429.203012] 
[16429.203026] rtl819xU:qos active process with associate response received
[16429.203029] 
[16429.203037] Associated successfully
[16429.203040] Using G rates:108
[16429.203042] Successfully associated, ht enabled
[16429.253011] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16429.267697] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16429.271438] =============>ARFR0+rate_index*4:0x100ff005
[16429.272211] ============>normal associate
[16429.272413] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16429.272420] ============>HTIOTActIsForcedRTSCTS(), 0
[16429.272423] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16429.274113] ===>ieee80211_associate_procedure_wq(), chan:11
[16429.328511] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16429.345593] =================>ieee80211_authentication_req():auth->algorithm is 0
[16429.362534] Association response status code 0x1
[16429.362553] ===>ieee80211_associate_procedure_wq(), chan:11
[16429.416297] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16429.430390] =================>ieee80211_authentication_req():auth->algorithm is 0
[16429.435513] Association response status code 0x1
[16429.435526] ===>ieee80211_associate_procedure_wq(), chan:11
[16429.484030] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16429.497713] =================>ieee80211_authentication_req():auth->algorithm is 0
[16429.522363] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16429.522365] 
[16429.522380] rtl819xU:qos active process with associate response received
[16429.522383] 
[16429.522392] Associated successfully
[16429.522394] Using G rates:108
[16429.522397] Successfully associated, ht enabled
[16429.571984] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16429.585911] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16429.589022] =============>ARFR0+rate_index*4:0x100ff005
[16429.589650] ============>normal associate
[16429.589861] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16429.589868] ============>HTIOTActIsForcedRTSCTS(), 0
[16429.589871] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16429.591204] ===>ieee80211_associate_procedure_wq(), chan:11
[16429.640613] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16429.655356] =================>ieee80211_authentication_req():auth->algorithm is 0
[16429.660545] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16429.660548] 
[16429.660560] rtl819xU:qos active process with associate response received
[16429.660563] 
[16429.660571] Associated successfully
[16429.660574] Using G rates:108
[16429.660576] Successfully associated, ht enabled
[16429.710071] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16429.723656] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16429.727110] =============>ARFR0+rate_index*4:0x100ff005
[16429.727606] ============>normal associate
[16429.727805] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16429.727811] ============>HTIOTActIsForcedRTSCTS(), 0
[16429.727815] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16429.729289] ===>ieee80211_associate_procedure_wq(), chan:11
[16429.779442] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16429.794022] =================>ieee80211_authentication_req():auth->algorithm is 0
[16429.799506] Association response status code 0x1
[16429.799526] ===>ieee80211_associate_procedure_wq(), chan:11
[16429.848798] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16429.862833] =================>ieee80211_authentication_req():auth->algorithm is 0
[16429.869954] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16429.869956] 
[16429.869969] rtl819xU:qos active process with associate response received
[16429.869971] 
[16429.869979] Associated successfully
[16429.869982] Using G rates:108
[16429.869984] Successfully associated, ht enabled
[16429.919621] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16429.933597] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16429.937092] =============>ARFR0+rate_index*4:0x100ff005
[16429.937831] ============>normal associate
[16429.949551] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16429.949558] ============>HTIOTActIsForcedRTSCTS(), 0
[16429.949561] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16429.950832] ===>ieee80211_associate_procedure_wq(), chan:11
[16430.000614] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16430.015263] =================>ieee80211_authentication_req():auth->algorithm is 0
[16430.020629] Association response status code 0x1
[16430.020646] ===>ieee80211_associate_procedure_wq(), chan:11
[16430.070067] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16430.084121] =================>ieee80211_authentication_req():auth->algorithm is 0
[16430.089284] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16430.089286] 
[16430.089302] rtl819xU:qos active process with associate response received
[16430.089304] 
[16430.089312] Associated successfully
[16430.089315] Using G rates:108
[16430.089317] Successfully associated, ht enabled
[16430.138542] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16430.152391] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16430.155216] =============>ARFR0+rate_index*4:0x100ff005
[16430.155714] ============>normal associate
[16430.155915] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16430.155922] ============>HTIOTActIsForcedRTSCTS(), 0
[16430.155925] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16430.157124] ===>ieee80211_associate_procedure_wq(), chan:11
[16430.206934] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16430.221404] =================>ieee80211_authentication_req():auth->algorithm is 0
[16430.226741] Association response status code 0x1
[16430.226754] ===>ieee80211_associate_procedure_wq(), chan:11
[16430.276645] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16430.290815] =================>ieee80211_authentication_req():auth->algorithm is 0
[16430.296275] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16430.296278] 
[16430.296292] rtl819xU:qos active process with associate response received
[16430.296295] 
[16430.296303] Associated successfully
[16430.296305] Using G rates:108
[16430.296307] Successfully associated, ht enabled
[16430.345331] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16430.359297] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16430.362697] =============>ARFR0+rate_index*4:0x100ff005
[16430.363446] ============>normal associate
[16430.363681] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16430.363688] ============>HTIOTActIsForcedRTSCTS(), 0
[16430.363691] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16430.364660] ===>ieee80211_associate_procedure_wq(), chan:11
[16430.414676] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16430.429208] =================>ieee80211_authentication_req():auth->algorithm is 0
[16430.434684] Association response status code 0x1
[16430.434697] ===>ieee80211_associate_procedure_wq(), chan:11
[16430.484334] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16430.498288] =================>ieee80211_authentication_req():auth->algorithm is 0
[16430.503673] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16430.503676] 
[16430.503687] rtl819xU:qos active process with associate response received
[16430.503690] 
[16430.503698] Associated successfully
[16430.503701] Using G rates:108
[16430.503703] Successfully associated, ht enabled
[16430.553296] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16430.567015] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16430.570522] =============>ARFR0+rate_index*4:0x100ff005
[16430.571261] ============>normal associate
[16430.571486] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16430.571493] ============>HTIOTActIsForcedRTSCTS(), 0
[16430.571496] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16430.572999] ===>ieee80211_associate_procedure_wq(), chan:11
[16430.622653] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16430.637037] =================>ieee80211_authentication_req():auth->algorithm is 0
[16430.642248] Association response status code 0x1
[16430.642268] ===>ieee80211_associate_procedure_wq(), chan:11
[16430.691482] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16430.705486] =================>ieee80211_authentication_req():auth->algorithm is 0
[16430.710866] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16430.710868] 
[16430.710885] rtl819xU:qos active process with associate response received
[16430.710888] 
[16430.710896] Associated successfully
[16430.710899] Using G rates:108
[16430.710901] Successfully associated, ht enabled
[16430.759998] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16430.774097] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16430.777086] =============>ARFR0+rate_index*4:0x100ff005
[16430.777830] ============>normal associate
[16430.778115] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16430.778122] ============>HTIOTActIsForcedRTSCTS(), 0
[16430.778125] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16430.779237] ===>ieee80211_associate_procedure_wq(), chan:11
[16430.828599] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16430.848030] =================>ieee80211_authentication_req():auth->algorithm is 0
[16430.854804] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16430.854807] 
[16430.854820] Associated successfully
[16430.854823] Using G rates:108
[16430.854825] Successfully associated, ht enabled
[16430.854836] rtl819xU:qos active process with associate response received
[16430.854838] 
[16430.904164] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16430.917914] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16430.921417] =============>ARFR0+rate_index*4:0x100ff005
[16430.922156] ============>normal associate
[16430.986949] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16430.986956] ============>HTIOTActIsForcedRTSCTS(), 0
[16430.986959] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16430.988449] ===>ieee80211_associate_procedure_wq(), chan:11
[16431.037952] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16431.053879] =================>ieee80211_authentication_req():auth->algorithm is 0
[16431.059880] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16431.059883] 
[16431.059897] rtl819xU:qos active process with associate response received
[16431.059899] 
[16431.059908] Associated successfully
[16431.059911] Using G rates:108
[16431.059913] Successfully associated, ht enabled
[16431.109392] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16431.123487] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16431.126624] =============>ARFR0+rate_index*4:0x100ff005
[16431.127346] ============>normal associate
[16431.127515] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16431.127521] ============>HTIOTActIsForcedRTSCTS(), 0
[16431.127525] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16431.129000] ===>ieee80211_associate_procedure_wq(), chan:11
[16431.178739] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16431.198107] =================>ieee80211_authentication_req():auth->algorithm is 0
[16431.203359] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16431.203362] 
[16431.203381] rtl819xU:qos active process with associate response received
[16431.203383] 
[16431.203393] Associated successfully
[16431.203396] Using G rates:108
[16431.203398] Successfully associated, ht enabled
[16431.252852] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16431.268310] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16431.272417] =============>ARFR0+rate_index*4:0x100ff005
[16431.273261] ============>normal associate
[16431.273463] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16431.273470] ============>HTIOTActIsForcedRTSCTS(), 0
[16431.273473] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16431.274829] ===>ieee80211_associate_procedure_wq(), chan:11
[16431.329214] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16431.346013] =================>ieee80211_authentication_req():auth->algorithm is 0
[16431.352015] Association response status code 0x1
[16431.352035] ===>ieee80211_associate_procedure_wq(), chan:11
[16431.405155] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16431.419503] =================>ieee80211_authentication_req():auth->algorithm is 0
[16431.425131] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16431.425133] 
[16431.425146] rtl819xU:qos active process with associate response received
[16431.425148] 
[16431.425157] Associated successfully
[16431.425159] Using G rates:108
[16431.425161] Successfully associated, ht enabled
[16431.474227] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16431.488599] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16431.492101] =============>ARFR0+rate_index*4:0x100ff005
[16431.492841] ============>normal associate
[16431.493061] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16431.493068] ============>HTIOTActIsForcedRTSCTS(), 0
[16431.493071] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16431.494581] ===>ieee80211_associate_procedure_wq(), chan:11
[16431.543656] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16431.558327] =================>ieee80211_authentication_req():auth->algorithm is 0
[16431.565073] Association response status code 0x1
[16431.565092] ===>ieee80211_associate_procedure_wq(), chan:11
[16431.614437] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16431.628528] =================>ieee80211_authentication_req():auth->algorithm is 0
[16431.633690] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16431.633692] 
[16431.633704] rtl819xU:qos active process with associate response received
[16431.633706] 
[16431.633714] Associated successfully
[16431.633717] Using G rates:108
[16431.633719] Successfully associated, ht enabled
[16431.682818] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16431.696538] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16431.700043] =============>ARFR0+rate_index*4:0x100ff005
[16431.700781] ============>normal associate
[16431.700994] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16431.701001] ============>HTIOTActIsForcedRTSCTS(), 0
[16431.701004] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16431.702179] ===>ieee80211_associate_procedure_wq(), chan:11
[16431.752143] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16431.766550] =================>ieee80211_authentication_req():auth->algorithm is 0
[16431.773516] Association response status code 0x1
[16431.773533] ===>ieee80211_associate_procedure_wq(), chan:11
[16431.822501] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16431.836469] =================>ieee80211_authentication_req():auth->algorithm is 0
[16431.842253] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16431.842255] 
[16431.842267] rtl819xU:qos active process with associate response received
[16431.842269] 
[16431.842277] Associated successfully
[16431.842280] Using G rates:108
[16431.842282] Successfully associated, ht enabled
[16431.891885] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16431.906069] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16431.908976] =============>ARFR0+rate_index*4:0x100ff005
[16431.909722] ============>normal associate
[16431.909928] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16431.909935] ============>HTIOTActIsForcedRTSCTS(), 0
[16431.909938] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16431.911086] ===>ieee80211_associate_procedure_wq(), chan:11
[16431.960772] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16431.975325] =================>ieee80211_authentication_req():auth->algorithm is 0
[16431.980591] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16431.980594] 
[16431.980607] Associated successfully
[16431.980611] Using G rates:108
[16431.980613] Successfully associated, ht enabled
[16431.980624] rtl819xU:qos active process with associate response received
[16431.980626] 
[16432.029856] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16432.043539] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16432.046807] =============>ARFR0+rate_index*4:0x100ff005
[16432.047558] ============>normal associate
[16432.048202] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16432.048209] ============>HTIOTActIsForcedRTSCTS(), 0
[16432.048212] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16432.049285] ===>ieee80211_associate_procedure_wq(), chan:11
[16432.098985] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16432.113456] =================>ieee80211_authentication_req():auth->algorithm is 0
[16432.119330] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16432.119333] 
[16432.119352] rtl819xU:qos active process with associate response received
[16432.119354] 
[16432.119368] Associated successfully
[16432.119371] Using G rates:108
[16432.119373] Successfully associated, ht enabled
[16432.168809] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16432.182621] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16432.185487] =============>ARFR0+rate_index*4:0x100ff005
[16432.186272] ============>normal associate
[16432.186503] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16432.186510] ============>HTIOTActIsForcedRTSCTS(), 0
[16432.186513] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16432.187667] ===>ieee80211_associate_procedure_wq(), chan:11
[16432.237511] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16432.254994] =================>ieee80211_authentication_req():auth->algorithm is 0
[16432.260837] Association response status code 0x1
[16432.260850] ===>ieee80211_associate_procedure_wq(), chan:11
[16432.309533] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16432.323204] =================>ieee80211_authentication_req():auth->algorithm is 0
[16432.347484] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16432.347487] 
[16432.347508] rtl819xU:qos active process with associate response received
[16432.347510] 
[16432.347523] Associated successfully
[16432.347526] Using G rates:108
[16432.347528] Successfully associated, ht enabled
[16432.397216] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16432.411142] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16432.414134] =============>ARFR0+rate_index*4:0x100ff005
[16432.414631] ============>normal associate
[16432.414845] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16432.414852] ============>HTIOTActIsForcedRTSCTS(), 0
[16432.414855] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16432.416035] ===>ieee80211_associate_procedure_wq(), chan:11
[16432.465804] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16432.480312] =================>ieee80211_authentication_req():auth->algorithm is 0
[16432.485697] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16432.485699] 
[16432.485714] rtl819xU:qos active process with associate response received
[16432.485716] 
[16432.485730] Associated successfully
[16432.485733] Using G rates:108
[16432.485735] Successfully associated, ht enabled
[16432.535669] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16432.549515] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16432.552874] =============>ARFR0+rate_index*4:0x100ff005
[16432.553632] ============>normal associate
[16432.553848] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16432.553854] ============>HTIOTActIsForcedRTSCTS(), 0
[16432.553857] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16432.555182] ===>ieee80211_associate_procedure_wq(), chan:11
[16432.605115] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16432.619655] =================>ieee80211_authentication_req():auth->algorithm is 0
[16432.625108] Association response status code 0x1
[16432.625127] ===>ieee80211_associate_procedure_wq(), chan:11
[16432.674138] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16432.687853] =================>ieee80211_authentication_req():auth->algorithm is 0
[16432.695442] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16432.695445] 
[16432.695458] rtl819xU:qos active process with associate response received
[16432.695460] 
[16432.695468] Associated successfully
[16432.695471] Using G rates:108
[16432.695473] Successfully associated, ht enabled
[16432.744452] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16432.758420] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16432.761948] =============>ARFR0+rate_index*4:0x100ff005
[16432.762536] ============>normal associate
[16432.762735] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16432.762742] ============>HTIOTActIsForcedRTSCTS(), 0
[16432.762745] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16432.764008] ===>ieee80211_associate_procedure_wq(), chan:11
[16432.814462] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16432.829338] =================>ieee80211_authentication_req():auth->algorithm is 0
[16432.834800] Association response status code 0x1
[16432.834819] ===>ieee80211_associate_procedure_wq(), chan:11
[16432.884319] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16432.902781] =================>ieee80211_authentication_req():auth->algorithm is 0
[16432.908165] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16432.908167] 
[16432.908180] rtl819xU:qos active process with associate response received
[16432.908182] 
[16432.908190] Associated successfully
[16432.908193] Using G rates:108
[16432.908195] Successfully associated, ht enabled
[16432.958162] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16432.972140] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16432.975634] =============>ARFR0+rate_index*4:0x100ff005
[16432.976373] ============>normal associate
[16432.992681] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16432.992688] ============>HTIOTActIsForcedRTSCTS(), 0
[16432.992691] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16432.993959] ===>ieee80211_associate_procedure_wq(), chan:11
[16433.043731] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16433.058496] =================>ieee80211_authentication_req():auth->algorithm is 0
[16433.065700] Association response status code 0x1
[16433.065715] ===>ieee80211_associate_procedure_wq(), chan:11
[16433.115152] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16433.129025] =================>ieee80211_authentication_req():auth->algorithm is 0
[16433.134684] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16433.134686] 
[16433.134702] rtl819xU:qos active process with associate response received
[16433.134704] 
[16433.134713] Associated successfully
[16433.134715] Using G rates:108
[16433.134717] Successfully associated, ht enabled
[16433.183821] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16433.197882] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16433.200777] =============>ARFR0+rate_index*4:0x100ff005
[16433.201242] ============>normal associate
[16433.201444] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16433.201451] ============>HTIOTActIsForcedRTSCTS(), 0
[16433.201454] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16433.203022] ===>ieee80211_associate_procedure_wq(), chan:11
[16433.252582] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16433.269377] =================>ieee80211_authentication_req():auth->algorithm is 0
[16433.275634] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16433.275637] 
[16433.275653] Associated successfully
[16433.275656] Using G rates:108
[16433.275658] Successfully associated, ht enabled
[16433.275669] rtl819xU:qos active process with associate response received
[16433.275671] 
[16433.327756] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16433.343237] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16433.347346] =============>ARFR0+rate_index*4:0x100ff005
[16433.348186] ============>normal associate
[16433.348457] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16433.348463] ============>HTIOTActIsForcedRTSCTS(), 0
[16433.348466] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16433.349865] ===>ieee80211_associate_procedure_wq(), chan:11
[16433.403763] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16433.418247] =================>ieee80211_authentication_req():auth->algorithm is 0
[16433.423662] Association response status code 0x1
[16433.423677] ===>ieee80211_associate_procedure_wq(), chan:11
[16433.472333] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16433.486156] =================>ieee80211_authentication_req():auth->algorithm is 0
[16433.491314] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16433.491316] 
[16433.491332] rtl819xU:qos active process with associate response received
[16433.491334] 
[16433.491343] Associated successfully
[16433.491345] Using G rates:108
[16433.491347] Successfully associated, ht enabled
[16433.540945] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16433.554918] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16433.558000] =============>ARFR0+rate_index*4:0x100ff005
[16433.558497] ============>normal associate
[16433.558707] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16433.558713] ============>HTIOTActIsForcedRTSCTS(), 0
[16433.558716] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16433.559941] ===>ieee80211_associate_procedure_wq(), chan:11
[16433.609593] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16433.624271] =================>ieee80211_authentication_req():auth->algorithm is 0
[16433.629661] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16433.629663] 
[16433.629682] rtl819xU:qos active process with associate response received
[16433.629685] 
[16433.629693] Associated successfully
[16433.629696] Using G rates:108
[16433.629698] Successfully associated, ht enabled
[16433.679258] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16433.693348] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16433.696618] =============>ARFR0+rate_index*4:0x100ff005
[16433.697369] ============>normal associate
[16433.697586] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16433.697593] ============>HTIOTActIsForcedRTSCTS(), 0
[16433.697596] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16433.698769] ===>ieee80211_associate_procedure_wq(), chan:11
[16433.748140] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16433.762360] =================>ieee80211_authentication_req():auth->algorithm is 0
[16433.767571] Association response status code 0x1
[16433.767586] ===>ieee80211_associate_procedure_wq(), chan:11
[16433.816874] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16433.830844] =================>ieee80211_authentication_req():auth->algorithm is 0
[16433.835977] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16433.835979] 
[16433.835990] rtl819xU:qos active process with associate response received
[16433.835993] 
[16433.836001] Associated successfully
[16433.836004] Using G rates:108
[16433.836006] Successfully associated, ht enabled
[16433.885230] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16433.900174] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16433.903030] =============>ARFR0+rate_index*4:0x100ff005
[16433.903529] ============>normal associate
[16433.903724] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16433.903731] ============>HTIOTActIsForcedRTSCTS(), 0
[16433.903734] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16433.904806] ===>ieee80211_associate_procedure_wq(), chan:11
[16433.955118] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16433.969093] =================>ieee80211_authentication_req():auth->algorithm is 0
[16433.974424] Association response status code 0x1
[16433.974443] ===>ieee80211_associate_procedure_wq(), chan:11
[16434.023328] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16434.037289] =================>ieee80211_authentication_req():auth->algorithm is 0
[16434.042383] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16434.042385] 
[16434.042399] rtl819xU:qos active process with associate response received
[16434.042401] 
[16434.042409] Associated successfully
[16434.042411] Using G rates:108
[16434.042413] Successfully associated, ht enabled
[16434.092271] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16434.106272] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16434.109148] =============>ARFR0+rate_index*4:0x100ff005
[16434.109726] ============>normal associate
[16434.110371] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16434.110378] ============>HTIOTActIsForcedRTSCTS(), 0
[16434.110381] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16434.111533] ===>ieee80211_associate_procedure_wq(), chan:11
[16434.161524] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16434.175661] =================>ieee80211_authentication_req():auth->algorithm is 0
[16434.181270] Association response status code 0x1
[16434.181285] ===>ieee80211_associate_procedure_wq(), chan:11
[16434.231017] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16434.244854] =================>ieee80211_authentication_req():auth->algorithm is 0
[16434.250106] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16434.250109] 
[16434.250125] rtl819xU:qos active process with associate response received
[16434.250128] 
[16434.250137] Associated successfully
[16434.250139] Using G rates:108
[16434.250141] Successfully associated, ht enabled
[16434.299709] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16434.313588] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16434.316793] =============>ARFR0+rate_index*4:0x100ff005
[16434.317291] ============>normal associate
[16434.317489] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16434.317496] ============>HTIOTActIsForcedRTSCTS(), 0
[16434.317499] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16434.318606] ===>ieee80211_associate_procedure_wq(), chan:11
[16434.368094] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16434.382595] =================>ieee80211_authentication_req():auth->algorithm is 0
[16434.389023] Association response status code 0x1
[16434.389038] ===>ieee80211_associate_procedure_wq(), chan:11
[16434.438456] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16434.453042] =================>ieee80211_authentication_req():auth->algorithm is 0
[16434.458771] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16434.458773] 
[16434.458820] rtl819xU:qos active process with associate response received
[16434.458822] 
[16434.458858] Associated successfully
[16434.458866] Using G rates:108
[16434.458868] Successfully associated, ht enabled
[16434.508367] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16434.523027] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16434.526528] =============>ARFR0+rate_index*4:0x100ff005
[16434.527267] ============>normal associate
[16434.527487] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16434.527494] ============>HTIOTActIsForcedRTSCTS(), 0
[16434.527497] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16434.528632] ===>ieee80211_associate_procedure_wq(), chan:11
[16434.578697] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16434.593156] =================>ieee80211_authentication_req():auth->algorithm is 0
[16434.600036] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16434.600039] 
[16434.600053] rtl819xU:qos active process with associate response received
[16434.600055] 
[16434.600065] Associated successfully
[16434.600072] Using G rates:108
[16434.600074] Successfully associated, ht enabled
[16434.650234] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16434.663986] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16434.666938] =============>ARFR0+rate_index*4:0x100ff005
[16434.667471] ============>normal associate
[16434.667653] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16434.667659] ============>HTIOTActIsForcedRTSCTS(), 0
[16434.667663] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16434.669088] ===>ieee80211_associate_procedure_wq(), chan:11
[16434.718237] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16434.732749] =================>ieee80211_authentication_req():auth->algorithm is 0
[16434.739220] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16434.739223] 
[16434.739239] rtl819xU:qos active process with associate response received
[16434.739241] 
[16434.739250] Associated successfully
[16434.739252] Using G rates:108
[16434.739254] Successfully associated, ht enabled
[16434.787948] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16434.802043] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16434.805573] =============>ARFR0+rate_index*4:0x100ff005
[16434.806311] ============>normal associate
[16434.806522] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16434.806529] ============>HTIOTActIsForcedRTSCTS(), 0
[16434.806532] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16434.807929] ===>ieee80211_associate_procedure_wq(), chan:11
[16434.857990] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16434.872559] =================>ieee80211_authentication_req():auth->algorithm is 0
[16434.878788] Association response status code 0x1
[16434.878806] ===>ieee80211_associate_procedure_wq(), chan:11
[16434.927983] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16434.942158] =================>ieee80211_authentication_req():auth->algorithm is 0
[16434.947901] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16434.947903] 
[16434.947919] rtl819xU:qos active process with associate response received
[16434.947921] 
[16434.947929] Associated successfully
[16434.947932] Using G rates:108
[16434.947934] Successfully associated, ht enabled
[16434.997293] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16435.011630] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16435.014464] =============>ARFR0+rate_index*4:0x100ff005
[16435.015087] ============>normal associate
[16435.015739] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[16435.015746] ============>HTIOTActIsForcedRTSCTS(), 0
[16435.015749] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[16435.016741] ===>ieee80211_associate_procedure_wq(), chan:11
[16435.066857] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16435.081205] =================>ieee80211_authentication_req():auth->algorithm is 0
[16435.086953] Association response status code 0x1
[16435.086964] ===>ieee80211_associate_procedure_wq(), chan:11
[16435.136386] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16435.150464] =================>ieee80211_authentication_req():auth->algorithm is 0
[16435.155596] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[16435.155598] 
[16435.155610] rtl819xU:qos active process with associate response received
[16435.155612] 
[16435.155622] Associated successfully
[16435.155624] Using G rates:108
[16435.155626] Successfully associated, ht enabled
[16435.204328] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[16435.219293] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[16435.220323] ============>normal associate
[16436.977536] =============>ARFR0+rate_index*4:0x100ff005
[16496.878314] =============>ARFR0+rate_index*4:0x100ff005
[16556.742043] =============>ARFR0+rate_index*4:0x100ff005
[16616.545511] =============>ARFR0+rate_index*4:0x100ff005
[16676.406380] =============>ARFR0+rate_index*4:0x100ff005
[16736.353495] =============>ARFR0+rate_index*4:0x100ff005
[16796.239285] =============>ARFR0+rate_index*4:0x100ff005
[16856.079446] =============>ARFR0+rate_index*4:0x100ff005
[16915.989506] =============>ARFR0+rate_index*4:0x100ff005
[16975.820019] =============>ARFR0+rate_index*4:0x100ff005
[17035.700248] =============>ARFR0+rate_index*4:0x100ff005
[17095.569448] =============>ARFR0+rate_index*4:0x100ff005
[17155.429696] =============>ARFR0+rate_index*4:0x100ff005
[17215.249540] =============>ARFR0+rate_index*4:0x100ff005
[17275.139590] =============>ARFR0+rate_index*4:0x100ff005
[17335.059981] =============>ARFR0+rate_index*4:0x100ff005
[17394.868658] =============>ARFR0+rate_index*4:0x100ff005
[17454.771195] =============>ARFR0+rate_index*4:0x100ff005
[17514.643669] =============>ARFR0+rate_index*4:0x100ff005
[17574.546109] =============>ARFR0+rate_index*4:0x100ff005
[17634.401513] =============>ARFR0+rate_index*4:0x100ff005
[17694.271678] =============>ARFR0+rate_index*4:0x100ff005
[17754.162980] =============>ARFR0+rate_index*4:0x100ff005
[17814.032831] =============>ARFR0+rate_index*4:0x100ff005
[17873.840408] =============>ARFR0+rate_index*4:0x100ff005
[17933.752570] =============>ARFR0+rate_index*4:0x100ff005
[17993.633993] =============>ARFR0+rate_index*4:0x100ff005
[18053.489525] =============>ARFR0+rate_index*4:0x100ff005
[18113.353633] =============>ARFR0+rate_index*4:0x100ff005
[18173.152135] =============>ARFR0+rate_index*4:0x100ff005
[18233.124519] =============>ARFR0+rate_index*4:0x100ff005
[18292.964179] =============>ARFR0+rate_index*4:0x100ff005
[18352.783142] =============>ARFR0+rate_index*4:0x100ff005
[18412.662187] =============>ARFR0+rate_index*4:0x100ff005
[18472.606762] =============>ARFR0+rate_index*4:0x100ff005
[18532.494480] =============>ARFR0+rate_index*4:0x100ff005
[18592.263916] =============>ARFR0+rate_index*4:0x100ff005
[18652.205291] =============>ARFR0+rate_index*4:0x100ff005
[18711.979129] =============>ARFR0+rate_index*4:0x100ff005
[18771.947051] =============>ARFR0+rate_index*4:0x100ff005
[18831.810284] =============>ARFR0+rate_index*4:0x100ff005
[18891.690461] =============>ARFR0+rate_index*4:0x100ff005
[18951.560339] =============>ARFR0+rate_index*4:0x100ff005
[19011.325044] =============>ARFR0+rate_index*4:0x100ff005
[19071.287312] =============>ARFR0+rate_index*4:0x100ff005
[19131.147180] =============>ARFR0+rate_index*4:0x100ff005
[19190.925322] =============>ARFR0+rate_index*4:0x100ff005
[19250.826153] =============>ARFR0+rate_index*4:0x100ff005
[19310.695830] =============>ARFR0+rate_index*4:0x100ff005
[19370.637558] =============>ARFR0+rate_index*4:0x100ff005
[19430.509277] =============>ARFR0+rate_index*4:0x100ff005
[19490.378876] =============>ARFR0+rate_index*4:0x100ff005
[19550.166641] =============>ARFR0+rate_index*4:0x100ff005
[19610.118320] =============>ARFR0+rate_index*4:0x100ff005
[19669.989296] =============>ARFR0+rate_index*4:0x100ff005
[19729.861641] =============>ARFR0+rate_index*4:0x100ff005
[19789.730015] =============>ARFR0+rate_index*4:0x100ff005
[19849.567381] =============>ARFR0+rate_index*4:0x100ff005
[19909.490272] =============>ARFR0+rate_index*4:0x100ff005
[19969.341038] =============>ARFR0+rate_index*4:0x100ff005
[20029.220989] =============>ARFR0+rate_index*4:0x100ff005
[20089.009357] =============>ARFR0+rate_index*4:0x100ff005
[20148.950961] =============>ARFR0+rate_index*4:0x100ff005
[20208.830661] =============>ARFR0+rate_index*4:0x100ff005
[20268.697020] =============>ARFR0+rate_index*4:0x100ff005
[20328.551899] =============>ARFR0+rate_index*4:0x100ff005
[20388.431223] =============>ARFR0+rate_index*4:0x100ff005
[20448.301199] =============>ARFR0+rate_index*4:0x100ff005
[20508.183150] =============>ARFR0+rate_index*4:0x100ff005
[20567.979252] =============>ARFR0+rate_index*4:0x100ff005
[20627.923225] =============>ARFR0+rate_index*4:0x100ff005
[20687.812656] =============>ARFR0+rate_index*4:0x100ff005
[20747.661146] =============>ARFR0+rate_index*4:0x100ff005
[20807.521829] =============>ARFR0+rate_index*4:0x100ff005
[20867.330896] =============>ARFR0+rate_index*4:0x100ff005
[20927.274714] =============>ARFR0+rate_index*4:0x100ff005
[20987.072733] =============>ARFR0+rate_index*4:0x100ff005
[21046.942076] =============>ARFR0+rate_index*4:0x100ff005
[21106.884263] =============>ARFR0+rate_index*4:0x100ff005
[21166.753853] =============>ARFR0+rate_index*4:0x100ff005
[21226.604874] =============>ARFR0+rate_index*4:0x100ff005
[21286.495055] =============>ARFR0+rate_index*4:0x100ff005
[21346.355059] =============>ARFR0+rate_index*4:0x100ff005
[21406.226271] =============>ARFR0+rate_index*4:0x100ff005
[21466.099364] =============>ARFR0+rate_index*4:0x100ff005
[21525.975701] =============>ARFR0+rate_index*4:0x100ff005
[21585.846047] =============>ARFR0+rate_index*4:0x100ff005
[21645.705794] =============>ARFR0+rate_index*4:0x100ff005
[21705.566539] =============>ARFR0+rate_index*4:0x100ff005
[21765.451605] =============>ARFR0+rate_index*4:0x100ff005
[21825.312939] =============>ARFR0+rate_index*4:0x100ff005
[21885.115685] =============>ARFR0+rate_index*4:0x100ff005
[21945.047675] =============>ARFR0+rate_index*4:0x100ff005
[22004.926855] =============>ARFR0+rate_index*4:0x100ff005
[22064.817315] =============>ARFR0+rate_index*4:0x100ff005
[22124.676936] =============>ARFR0+rate_index*4:0x100ff005
[22184.548286] =============>ARFR0+rate_index*4:0x100ff005
[22244.326960] =============>ARFR0+rate_index*4:0x100ff005
[22304.288854] =============>ARFR0+rate_index*4:0x100ff005
[22364.087495] =============>ARFR0+rate_index*4:0x100ff005
[22423.967152] =============>ARFR0+rate_index*4:0x100ff005
[22483.889541] =============>ARFR0+rate_index*4:0x100ff005
[22543.769369] =============>ARFR0+rate_index*4:0x100ff005
[22603.568391] =============>ARFR0+rate_index*4:0x100ff005
[22663.510067] =============>ARFR0+rate_index*4:0x100ff005
[22723.308455] =============>ARFR0+rate_index*4:0x100ff005
[22783.187863] =============>ARFR0+rate_index*4:0x100ff005
[22843.119654] =============>ARFR0+rate_index*4:0x100ff005
[22902.981231] =============>ARFR0+rate_index*4:0x100ff005
[22962.860559] =============>ARFR0+rate_index*4:0x100ff005
[23022.659203] =============>ARFR0+rate_index*4:0x100ff005
[23082.590057] =============>ARFR0+rate_index*4:0x100ff005
[23142.389249] =============>ARFR0+rate_index*4:0x100ff005
[23202.341331] =============>ARFR0+rate_index*4:0x100ff005
[23262.211551] =============>ARFR0+rate_index*4:0x100ff005
[23322.010766] =============>ARFR0+rate_index*4:0x100ff005
[23381.952122] =============>ARFR0+rate_index*4:0x100ff005
[23441.812241] =============>ARFR0+rate_index*4:0x100ff005
[23501.683210] =============>ARFR0+rate_index*4:0x100ff005
[23561.562668] =============>ARFR0+rate_index*4:0x100ff005
[23621.432644] =============>ARFR0+rate_index*4:0x100ff005
[23681.303363] =============>ARFR0+rate_index*4:0x100ff005
[23741.172587] =============>ARFR0+rate_index*4:0x100ff005
[23801.032827] =============>ARFR0+rate_index*4:0x100ff005
[23860.862412] =============>ARFR0+rate_index*4:0x100ff005
[23920.781889] =============>ARFR0+rate_index*4:0x100ff005
[23980.643752] =============>ARFR0+rate_index*4:0x100ff005
[24040.515098] =============>ARFR0+rate_index*4:0x100ff005
[24100.395679] =============>ARFR0+rate_index*4:0x100ff005
[24160.255668] =============>ARFR0+rate_index*4:0x100ff005
[24220.072603] =============>ARFR0+rate_index*4:0x100ff005
[24280.003858] =============>ARFR0+rate_index*4:0x100ff005
[24339.876569] =============>ARFR0+rate_index*4:0x100ff005
[24399.735064] =============>ARFR0+rate_index*4:0x100ff005
[24459.605797] =============>ARFR0+rate_index*4:0x100ff005
[24519.486836] =============>ARFR0+rate_index*4:0x100ff005
[24579.345730] =============>ARFR0+rate_index*4:0x100ff005
[24639.226313] =============>ARFR0+rate_index*4:0x100ff005
[24699.029026] =============>ARFR0+rate_index*4:0x100ff005
[24758.955658] =============>ARFR0+rate_index*4:0x100ff005
[24818.786221] =============>ARFR0+rate_index*4:0x100ff005
[24878.692611] =============>ARFR0+rate_index*4:0x100ff005
[24938.567979] =============>ARFR0+rate_index*4:0x100ff005
[24998.355977] =============>ARFR0+rate_index*4:0x100ff005
[25058.308146] =============>ARFR0+rate_index*4:0x100ff005
[25118.188039] =============>ARFR0+rate_index*4:0x100ff005
[25178.048719] =============>ARFR0+rate_index*4:0x100ff005
[25237.919692] =============>ARFR0+rate_index*4:0x100ff005
[25297.736872] =============>ARFR0+rate_index*4:0x100ff005
[25357.596908] =============>ARFR0+rate_index*4:0x100ff005
[25417.466840] =============>ARFR0+rate_index*4:0x100ff005
[25477.348290] =============>ARFR0+rate_index*4:0x100ff005
[25537.188248] =============>ARFR0+rate_index*4:0x100ff005
[25597.159620] =============>ARFR0+rate_index*4:0x100ff005
[25656.999405] =============>ARFR0+rate_index*4:0x100ff005
[25716.879856] =============>ARFR0+rate_index*4:0x100ff005
[25776.678997] =============>ARFR0+rate_index*4:0x100ff005
[25836.610318] =============>ARFR0+rate_index*4:0x100ff005
[25896.490277] =============>ARFR0+rate_index*4:0x100ff005
[25956.379307] =============>ARFR0+rate_index*4:0x100ff005
[26016.230719] =============>ARFR0+rate_index*4:0x100ff005
[26076.049650] =============>ARFR0+rate_index*4:0x100ff005
[26135.889687] =============>ARFR0+rate_index*4:0x100ff005
[26195.799827] =============>ARFR0+rate_index*4:0x100ff005
[26255.702012] =============>ARFR0+rate_index*4:0x100ff005
[26315.564125] =============>ARFR0+rate_index*4:0x100ff005
[26375.462914] =============>ARFR0+rate_index*4:0x100ff005
[26435.322206] =============>ARFR0+rate_index*4:0x100ff005
[26495.212715] =============>ARFR0+rate_index*4:0x100ff005
[26555.063856] =============>ARFR0+rate_index*4:0x100ff005
[26614.933369] =============>ARFR0+rate_index*4:0x100ff005
[26674.803427] =============>ARFR0+rate_index*4:0x100ff005
[26734.663299] =============>ARFR0+rate_index*4:0x100ff005
[26794.524038] =============>ARFR0+rate_index*4:0x100ff005
[26854.424952] =============>ARFR0+rate_index*4:0x100ff005
[26914.202116] =============>ARFR0+rate_index*4:0x100ff005
[26974.153790] =============>ARFR0+rate_index*4:0x100ff005
[27034.038242] =============>ARFR0+rate_index*4:0x100ff005
[27093.894117] =============>ARFR0+rate_index*4:0x100ff005
[27153.785933] =============>ARFR0+rate_index*4:0x100ff005
[27213.624454] =============>ARFR0+rate_index*4:0x100ff005
[27273.506175] =============>ARFR0+rate_index*4:0x100ff005
[27333.385989] =============>ARFR0+rate_index*4:0x100ff005
[27393.193939] =============>ARFR0+rate_index*4:0x100ff005
[27453.126053] =============>ARFR0+rate_index*4:0x100ff005
[27512.986554] =============>ARFR0+rate_index*4:0x100ff005
[27572.789392] =============>ARFR0+rate_index*4:0x100ff005
[27632.729621] =============>ARFR0+rate_index*4:0x100ff005
[27692.581632] =============>ARFR0+rate_index*4:0x100ff005
[27752.451481] =============>ARFR0+rate_index*4:0x100ff005
[27812.337921] =============>ARFR0+rate_index*4:0x100ff005
[27872.116607] =============>ARFR0+rate_index*4:0x100ff005
[27932.016518] =============>ARFR0+rate_index*4:0x100ff005
[27991.866894] =============>ARFR0+rate_index*4:0x100ff005
[28051.827700] =============>ARFR0+rate_index*4:0x100ff005
[28111.698528] =============>ARFR0+rate_index*4:0x100ff005
[28171.552153] =============>ARFR0+rate_index*4:0x100ff005
[28231.428110] =============>ARFR0+rate_index*4:0x100ff005
[28291.309062] =============>ARFR0+rate_index*4:0x100ff005
[28351.077970] =============>ARFR0+rate_index*4:0x100ff005
[28411.050884] =============>ARFR0+rate_index*4:0x100ff005
[28470.818713] =============>ARFR0+rate_index*4:0x100ff005
[28530.769093] =============>ARFR0+rate_index*4:0x100ff005
[28590.589224] =============>ARFR0+rate_index*4:0x100ff005
[28650.448546] =============>ARFR0+rate_index*4:0x100ff005
[28710.382850] =============>ARFR0+rate_index*4:0x100ff005
[28770.261619] =============>ARFR0+rate_index*4:0x100ff005
[28830.133336] =============>ARFR0+rate_index*4:0x100ff005
[28890.001067] =============>ARFR0+rate_index*4:0x100ff005
[28949.872661] =============>ARFR0+rate_index*4:0x100ff005
[29009.741888] =============>ARFR0+rate_index*4:0x100ff005
[29069.540358] =============>ARFR0+rate_index*4:0x100ff005
[29129.400228] =============>ARFR0+rate_index*4:0x100ff005
[29189.372142] =============>ARFR0+rate_index*4:0x100ff005
[29249.130861] =============>ARFR0+rate_index*4:0x100ff005
[29309.051187] =============>ARFR0+rate_index*4:0x100ff005
[29368.981347] =============>ARFR0+rate_index*4:0x100ff005
[29428.835320] =============>ARFR0+rate_index*4:0x100ff005
[29488.703549] =============>ARFR0+rate_index*4:0x100ff005
[29496.621457] usbcore: deregistering interface driver rtl819xU
[29496.691619] rtl819xU:==========>rtl8192_down()
[29496.691621] 
[29496.702204] rtl819xU:<==========rtl8192_down()
[29496.702206] 
[29496.761928] rtl819xU:=============>wlan driver to be removed
[29496.761931] 
[29496.772644] rtl819xU:wlan driver removed
[29496.772647] 
[29496.772679] rtl819xU:Exiting
[29496.772685] ieee80211_crypt: unregistered algorithm 'TKIP'
[29496.772688] ieee80211_crypt: unregistered algorithm 'CCMP'
[29496.772691] ieee80211_crypt: unregistered algorithm 'WEP'
[29496.772694] ieee80211_crypt: unregistered algorithm 'NULL' (deinit)
[29506.920500] usb 2-1.5: USB disconnect, address 4
[29509.963074] usb 2-1.5: new high speed USB device using ehci_hcd and address 7
[29510.124478] r8192s_usb: module is from the staging directory, the quality is unknown, you have been warned.
[29510.127141] ieee80211_crypt: registered algorithm 'NULL'
[29510.127143] ieee80211_crypt: registered algorithm 'TKIP'
[29510.127144] ieee80211_crypt: registered algorithm 'CCMP'
[29510.127145] ieee80211_crypt: registered algorithm 'WEP'
[29510.127146] 
[29510.127146] Linux kernel driver for RTL8192 based WLAN cards
[29510.127147] Copyright (c) 2007-2008, Realsil Wlan
[29510.127991] ==>ep_num:4, in_ep_num:1, out_ep_num:3
[29510.127995] ==>RtInPipes:3  
[29510.127998] ==>RtOutPipes:4  6  13  
[29510.128003] ==>txqueue_to_outpipemap for BK, BE, VI, VO, HCCA, TXCMD, MGNT, HIGH, BEACON:
[29510.128006] 1  1  0  0  2  2  2  2  2  
[29510.370032] Dot11d_Init()
[29510.370973] usbcore: registered new interface driver rtl819xU
[29510.391120] rtl819xU:FirmwareRequest92S(): signature: 8192, version: 902b, size: 30, imemsize: 7408, sram size: 9688
[29510.392114] rtl819xU:FirmwareCheckReady(): LoadFWStatus(1), success
[29510.395854] rtl819xU:FirmwareCheckReady(): LoadFWStatus(2), success
[29510.395981] rtl819xU:FirmwareCheckReady(): DMEM code download success, CPUStatus(0x3f)
[29510.397429] rtl819xU:FirmwareCheckReady(): polling load firmware ready, CPUStatus(ff)
[29510.398427] rtl819xU:FirmwareCheckReady(): Current RCR settings(0x157e20e)
[29510.398551] rtl819xU:FirmwareCheckReady(): LoadFWStatus(3), success
[29510.398555] rtl819xU:FirmwareDownload92S(): Firmware Download Success
[29513.144128] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[29567.265817] cfg80211: Calling CRDA to update world regulatory domain
[29567.335895] cfg80211: World regulatory domain updated:
[29567.335897]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[29567.335899]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[29567.335901]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[29567.335902]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[29567.335904]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[29567.335905]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[29567.409955] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[29567.409957] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[29582.988529] write_nic_byte TimeOut! status:-71
[29582.992762] read_nic_byte TimeOut! status:-71
[29582.996882] write_nic_byte TimeOut! status:-71
[29583.000991] read_nic_byte TimeOut! status:-71
[29583.005113] read_nic_byte TimeOut! status:-71
[29583.009227] read_nic_byte TimeOut! status:-71
[29583.013341] read_nic_dword TimeOut! status:-71
[29583.049770] usb 2-1.5: USB disconnect, address 7
[29583.049922] rtl819xU:==========>rtl8192_down()
[29583.049925] 
[29583.049930] read_nic_byte TimeOut! status:-19
[29583.049933] write_nic_byte TimeOut! status:-19
[29583.059944] rtl819xU:<==========rtl8192_down()
[29583.059946] 
[29583.059952] read_nic_dword TimeOut! status:-19
[29583.059955] write_nic_dword TimeOut! status:-19
[29583.059958] read_nic_byte TimeOut! status:-19
[29583.059960] write_nic_byte TimeOut! status:-19
[29583.134707] rtl819xU:=============>wlan driver to be removed
[29583.134710] 
[29583.145541] rtl819xU:wlan driver removed
[29583.145544] 
[29594.020915] usb 2-1.5: new high speed USB device using ehci_hcd and address 8
[29594.134580] ==>ep_num:4, in_ep_num:1, out_ep_num:3
[29594.134584] ==>RtInPipes:3  
[29594.134587] ==>RtOutPipes:4  6  13  
[29594.134592] ==>txqueue_to_outpipemap for BK, BE, VI, VO, HCCA, TXCMD, MGNT, HIGH, BEACON:
[29594.134595] 1  1  0  0  2  2  2  2  2  
[29594.391411] Dot11d_Init()
[29594.412861] rtl819xU:FirmwareRequest92S(): signature: 8192, version: 902b, size: 30, imemsize: 7408, sram size: 9688
[29594.413997] rtl819xU:FirmwareCheckReady(): LoadFWStatus(1), success
[29594.417783] rtl819xU:FirmwareCheckReady(): LoadFWStatus(2), success
[29594.417983] rtl819xU:FirmwareCheckReady(): DMEM code download success, CPUStatus(0x3f)
[29594.419384] rtl819xU:FirmwareCheckReady(): polling load firmware ready, CPUStatus(ff)
[29594.420357] rtl819xU:FirmwareCheckReady(): Current RCR settings(0x157e20e)
[29594.420605] rtl819xU:FirmwareCheckReady(): LoadFWStatus(3), success
[29594.420609] rtl819xU:FirmwareDownload92S(): Firmware Download Success
[29597.162982] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[29695.335803] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[29695.483502] EXT4-fs (sda3): re-mounted. Opts: commit=0
[29696.149222] rtl819xU:==========>rtl8192_down()
[29696.149225] 
[29696.161820] rtl819xU:<==========rtl8192_down()
[29696.161822] 
[29697.528937] PM: Syncing filesystems ... done.
[29697.535105] PM: Preparing system for mem sleep
[29697.535116] Freezing user space processes ... (elapsed 0.02 seconds) done.
[29697.555865] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[29697.575823] PM: Entering mem sleep
[29697.575877] Suspending console(s) (use no_console_suspend to debug)
[29697.576421] rtl819xU:============> r8192U suspend call.
[29697.576424] 
[29697.576426] netif not running, go out suspend function
[29697.576912] sd 7:0:0:0: [sdf] Synchronizing SCSI cache
[29697.576974] sd 5:0:0:0: [sde] Synchronizing SCSI cache
[29697.577099] sd 5:0:0:0: [sde] Stopping disk
[29697.577125] sd 4:0:0:0: [sdd] Synchronizing SCSI cache
[29697.577272] sd 3:0:0:0: [sdc] Synchronizing SCSI cache
[29697.577316] sd 7:0:0:0: [sdf] Stopping disk
[29697.577329] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[29697.577355] sd 4:0:0:0: [sdd] Stopping disk
[29697.577379] sd 3:0:0:0: [sdc] Stopping disk
[29697.577505] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[29697.577643] sd 0:0:0:0: [sda] Stopping disk
[29697.579064] sd 2:0:0:0: [sdb] Stopping disk
[29697.595985] ACPI handle has no context!
[29697.616111] ahci 0000:03:00.0: PCI INT A disabled
[29697.635429] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[29697.686230] HDA Intel 0000:00:1b.0: PCI INT A disabled
[29697.686255] ACPI handle has no context!
[29697.695170] PM: suspend of drv:usb dev:1-1 complete after 117.936 msecs
[29697.695346] PM: suspend of drv:usb dev:usb1 complete after 117.869 msecs
[29697.705529] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 127.903 msecs
[29697.715510] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[29697.715517] PM: suspend of drv:ehci_hcd dev:0000:00:1a.0 complete after 137.906 msecs
[29697.718451] PM: suspend of drv:sd dev:4:0:0:0 complete after 141.631 msecs
[29697.718531] PM: suspend of drv:scsi dev:target4:0:0 complete after 141.664 msecs
[29697.718584] PM: suspend of drv:scsi dev:host4 complete after 141.275 msecs
[29697.841269] PM: suspend of drv:sd dev:2:0:0:0 complete after 264.510 msecs
[29697.841348] PM: suspend of drv:scsi dev:target2:0:0 complete after 264.479 msecs
[29697.841432] PM: suspend of drv:scsi dev:host2 complete after 264.345 msecs
[29697.974639] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 397.643 msecs
[29698.123317] PM: suspend of drv:sd dev:0:0:0:0 complete after 546.993 msecs
[29698.123394] PM: suspend of drv:scsi dev:target0:0:0 complete after 547.049 msecs
[29698.123478] PM: suspend of drv:scsi dev:host0 complete after 546.981 msecs
[29698.123858] pata_jmicron 0000:03:00.1: PCI INT B disabled
[29698.134296] PM: suspend of drv:pata_jmicron dev:0000:03:00.1 complete after 557.716 msecs
[29698.134374] PM: suspend of drv:pcieport dev:0000:00:1c.6 complete after 557.695 msecs
[29698.134397] PM: suspend of drv: dev:pci0000:00 complete after 557.662 msecs
[29698.134451] PM: suspend of devices complete after 559.576 msecs
[29698.134456] PM: suspend devices took 0.560 seconds
[29698.134587] r8169 0000:07:04.0: PME# enabled
[29698.134602] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[29698.154313] r8169 0000:02:00.0: PME# enabled
[29698.154327] pcieport 0000:00:1c.7: wake-up capability enabled by ACPI
[29698.214285] PM: late suspend of devices complete after 79.997 msecs
[29698.214540] ACPI: Preparing to enter system sleep state S3
[29698.215205] PM: Saving platform NVS memory
[29698.218451] Disabling non-boot CPUs ...
[29698.224479] Broke affinity for irq 42
[29698.225510] CPU 1 is now offline
[29698.234402] Broke affinity for irq 23
[29698.234408] Broke affinity for irq 43
[29698.235432] CPU 2 is now offline
[29698.254327] Broke affinity for irq 44
[29698.255346] CPU 3 is now offline
[29698.255348] SMP alternatives: switching to UP code
[29698.260110] Extended CMOS year: 2000
[29698.260482] Back to C!
[29698.260484] PM: Restoring platform NVS memory
[29698.262990] Extended CMOS year: 2000
[29698.263024] Enabling non-boot CPUs ...
[29698.263170] SMP alternatives: switching to SMP code
[29698.268089] Booting Node 0 Processor 1 APIC 0x2
[29698.516643] hpet: hpet4 irq 42 for MSI
[29698.516659] CPU1 is up
[29698.518110] Booting Node 0 Processor 2 APIC 0x4
[29698.776534] hpet: hpet5 irq 43 for MSI
[29698.776580] CPU2 is up
[29698.778362] Booting Node 0 Processor 3 APIC 0x6
[29699.126015] hpet: hpet6 irq 44 for MSI
[29699.126090] CPU3 is up
[29699.128036] ACPI: Waking up from system sleep state S3
[29699.128564] pcieport 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x1a010a)
[29699.128570] pcieport 0000:00:03.0: restoring config space at offset 0x9 (was 0x10001, writing 0xeff1e001)
[29699.128573] pcieport 0000:00:03.0: restoring config space at offset 0x8 (was 0x0, writing 0xf7c0f400)
[29699.128575] pcieport 0000:00:03.0: restoring config space at offset 0x7 (was 0x0, writing 0xb0b0)
[29699.128578] pcieport 0000:00:03.0: restoring config space at offset 0x6 (was 0x0, writing 0x10100)
[29699.128581] pcieport 0000:00:03.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
[29699.128584] pcieport 0000:00:03.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[29699.128612] pci 0000:00:08.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[29699.128631] pci 0000:00:08.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[29699.128649] pci 0000:00:08.2: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[29699.128663] pci 0000:00:08.3: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[29699.128675] pci 0000:00:10.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[29699.128687] pci 0000:00:10.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[29699.128714] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[29699.128745] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[29699.128749] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[29699.128769] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x20105)
[29699.128776] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xf031f021)
[29699.128779] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xf010f000)
[29699.128782] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x200000f0, writing 0x1010)
[29699.128787] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[29699.128791] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507)
[29699.128819] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x20100, writing 0x20105)
[29699.128826] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x1fff1, writing 0xf071f061)
[29699.128829] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0xfff0, writing 0xf050f040)
[29699.128832] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x200000f0, writing 0x2020)
[29699.128838] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[29699.128841] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100104, writing 0x100507)
[29699.128869] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x20200, writing 0x2020a)
[29699.128876] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x1fff1, writing 0xf0b1f0a1)
[29699.128879] pcieport 0000:00:1c.5: restoring config space at offset 0x8 (was 0xfff0, writing 0xf090f080)
[29699.128882] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0x200000f0, writing 0x3030)
[29699.128888] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[29699.128891] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100104, writing 0x100507)
[29699.128919] pcieport 0000:00:1c.6: restoring config space at offset 0xf (was 0x20300, writing 0x2030f)
[29699.128926] pcieport 0000:00:1c.6: restoring config space at offset 0x9 (was 0x1fff1, writing 0xf0d1f0c1)
[29699.128933] pcieport 0000:00:1c.6: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[29699.128937] pcieport 0000:00:1c.6: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[29699.128965] pcieport 0000:00:1c.7: restoring config space at offset 0xf (was 0x20400, writing 0x2040b)
[29699.128976] pcieport 0000:00:1c.7: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[29699.128980] pcieport 0000:00:1c.7: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[29699.129021] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[29699.129038] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff)
[29699.129104] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[29699.129145] nvidia 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[29699.129151] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xbc01)
[29699.129154] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xf4000004)
[29699.129158] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xe000000c)
[29699.129161] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6000000)
[29699.129165] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[29699.129196] ahci 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10f)
[29699.129218] ahci 0000:03:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[29699.129224] ahci 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)
[29699.129257] pata_jmicron 0000:03:00.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[29699.129279] pata_jmicron 0000:03:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[29699.129335] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[29699.129463] PM: early resume of devices complete after 0.936 msecs
[29699.129554] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[29699.129557] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[29699.129560] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[29699.129564] HDA Intel 0000:00:1b.0: setting latency timer to 64
[29699.129578] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[29699.129586] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[29699.129588] pci 0000:00:1e.0: setting latency timer to 64
[29699.129601] ahci 0000:00:1f.2: setting latency timer to 64
[29699.129606] HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[29699.129633] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[29699.129640] ahci 0000:03:00.0: setting latency timer to 64
[29699.129652] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[29699.129657] pata_jmicron 0000:03:00.1: setting latency timer to 64
[29699.129670] pcieport 0000:00:1c.7: wake-up capability disabled by ACPI
[29699.129675] r8169 0000:02:00.0: PME# disabled
[29699.130321] pci 0000:00:1e.0: wake-up capability disabled by ACPI
[29699.130325] r8169 0000:07:04.0: PME# disabled
[29699.134904] sd 0:0:0:0: [sda] Starting disk
[29699.134987] sd 2:0:0:0: [sdb] Starting disk
[29699.135003] sd 3:0:0:0: [sdc] Starting disk
[29699.145616] sd 4:0:0:0: [sdd] Starting disk
[29699.145770] sd 5:0:0:0: [sde] Starting disk
[29699.145786] sd 7:0:0:0: [sdf] Starting disk
[29699.265660] firewire_core: skipped bus generations, destroying all nodes
[29699.285588] PM: resume of drv:firewire_ohci dev:0000:07:03.0 complete after 155.880 msecs
[29699.285926] rtl819xU:================>r8192U resume call.
[29699.285928] netif not running, go out resume function
[29699.285932] PM: resume of drv:usb dev:2-1.5 complete after 130.525 msecs
[29699.285992] PM: resume of drv:rtl819xU dev:2-1.5:1.0 complete after 130.576 msecs
[29699.286433] PM: resume of drv:usb dev:2-1.2 complete after 141.106 msecs
[29699.286441] PM: resume of drv:usbfs dev:2-1.2:1.0 complete after 141.114 msecs
[29699.286607] PM: resume of drv:usb dev:2-1.8 complete after 141.203 msecs
[29699.286619] PM: resume of drv:usbhid dev:2-1.8:1.2 complete after 141.165 msecs
[29699.286661] PM: resume of drv:usbhid dev:2-1.8:1.0 complete after 141.239 msecs
[29699.286666] PM: resume of drv:usbhid dev:2-1.8:1.1 complete after 141.237 msecs
[29699.297189] PM: resume of drv:usb dev:2-1.7 complete after 151.857 msecs
[29699.297217] PM: resume of drv:usbhid dev:2-1.7:1.1 complete after 151.838 msecs
[29699.297237] PM: resume of drv:usbhid dev:2-1.7:1.0 complete after 151.880 msecs
[29699.481330] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 352.485 msecs
[29699.494867] ata10: SATA link down (SStatus 0 SControl 300)
[29699.495186] ata9: SATA link down (SStatus 0 SControl 300)
[29699.495217] ata7: SATA link down (SStatus 0 SControl 300)
[29699.773658] firewire_core: rediscovered device fw0
[29701.211454] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[29701.216870] ata5.00: configured for UDMA/133
[29701.263255] PM: resume of drv:sd dev:4:0:0:0 complete after 2122.227 msecs
[29701.263351] PM: resume of drv:scsi_device dev:4:0:0:0 complete after 2122.310 msecs
[29702.049318] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[29702.141781] ata6.00: configured for UDMA/133
[29702.181292] PM: resume of drv:sd dev:5:0:0:0 complete after 3042.099 msecs
[29702.181364] PM: resume of drv:scsi_device dev:5:0:0:0 complete after 3042.170 msecs
[29702.778652] ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[29702.778654] ata1.01: ACPI cmd ef/03:46:00:00:00:b0 (SET FEATURES) filtered out
[29702.837645] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[29702.837651] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[29702.917820] ata1.00: configured for UDMA/100
[29702.967769] ata1.01: configured for UDMA/66
[29702.993117] PM: resume of drv:sd dev:0:0:0:0 complete after 3866.574 msecs
[29702.993137] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 3826.788 msecs
[29702.993211] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3866.663 msecs
[29703.056500] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[29703.057978] ata4.00: configured for UDMA/133
[29703.088956] PM: resume of drv:sd dev:3:0:0:0 complete after 3962.522 msecs
[29703.089030] PM: resume of drv:scsi_device dev:3:0:0:0 complete after 3951.977 msecs
[29704.104301] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[29704.247889] ata8.00: configured for UDMA/133
[29704.283904] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[29704.293234] ata3.00: configured for UDMA/133
[29704.309477] PM: resume of drv:sd dev:2:0:0:0 complete after 5185.705 msecs
[29704.309497] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 1319.192 msecs
[29704.309570] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 5185.796 msecs
[29704.353307] PM: resume of drv:sd dev:7:0:0:0 complete after 5218.806 msecs
[29704.353387] PM: resume of drv:scsi_device dev:7:0:0:0 complete after 5209.074 msecs
[29704.353594] PM: resume of drv:scsi dev:host10 complete after 5209.278 msecs
[29704.353618] PM: resume of drv:scsi dev:target10:0:1 complete after 5209.228 msecs
[29704.353633] PM: resume of drv:sr dev:10:0:1:0 complete after 5209.234 msecs
[29704.353639] PM: resume of drv:scsi_host dev:host10 complete after 5209.305 msecs
[29704.353646] PM: resume of drv:scsi_device dev:10:0:1:0 complete after 5209.237 msecs
[29704.353676] PM: resume of drv:scsi dev:target10:0:0 complete after 5209.339 msecs
[29704.353725] PM: resume of drv:sr dev:10:0:0:0 complete after 5209.378 msecs
[29704.353776] PM: resume of drv:scsi_device dev:10:0:0:0 complete after 5209.411 msecs
[29704.353825] PM: resume of devices complete after 5235.663 msecs
[29704.354015] PM: resume devices took 5.240 seconds
[29704.354046] PM: Finishing wakeup.
[29704.354047] Restarting tasks ... done.
[29704.472861] r8169 0000:02:00.0: eth0: link down
[29704.473158] ADDRCONF(NETDEV_UP): eth0: link is not ready
[29704.474012] r8169 0000:07:04.0: eth1: link down
[29704.474266] ADDRCONF(NETDEV_UP): eth1: link is not ready
[29704.483558] rtl819xU:FirmwareCheckReady(): LoadFWStatus(1), success
[29704.486818] rtl819xU:FirmwareCheckReady(): LoadFWStatus(2), success
[29704.487050] rtl819xU:FirmwareCheckReady(): DMEM code download success, CPUStatus(0x3f)
[29704.488192] rtl819xU:FirmwareCheckReady(): polling load firmware ready, CPUStatus(ff)
[29704.489187] rtl819xU:FirmwareCheckReady(): Current RCR settings(0x157e20e)
[29704.489314] rtl819xU:FirmwareCheckReady(): LoadFWStatus(3), success
[29704.489316] rtl819xU:FirmwareDownload92S(): Firmware Download Success
[29707.254691] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[29711.281339] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[29711.643870] EXT4-fs (sda3): re-mounted. Opts: commit=0
[29717.451217] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[29717.451224] ============>HTIOTActIsForcedRTSCTS(), 0
[29717.451228] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[29717.451242] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[29717.451246] ============>HTIOTActIsForcedRTSCTS(), 0
[29717.451249] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[29717.453547] ===>ieee80211_associate_procedure_wq(), chan:11
[29717.503746] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[29717.518097] =================>ieee80211_authentication_req():auth->algorithm is 0
[29717.542692] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[29717.542695] 
[29717.542715] rtl819xU:qos active process with associate response received
[29717.542718] 
[29717.542728] Associated successfully
[29717.542731] Using G rates:108
[29717.542733] Successfully associated, ht enabled
[29717.591875] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[29717.605628] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[29717.609125] =============>ARFR0+rate_index*4:0x100ff005
[29717.616321] ============>normal associate
[29717.616929] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[29717.630298] alg name:CCMP
[29717.630312] rtl819xU:EnableHWSecurityConfig8192(): hwsec: 1, pairwise_key: 4, SECR_value: c
[29717.630459] rtl819xU:setKey(): dev: ffff880103d80000, EntryNo: 4, KeyIndex: 0, KeyType: 4, MacAddr: 00:24:d4:60:8d:3c
[29717.673796] alg name:TKIP
[29717.673812] rtl819xU:setKey(): dev: ffff880103d80000, EntryNo: 1, KeyIndex: 1, KeyType: 2, MacAddr: ff:ff:ff:ff:ff:ff
[29717.678136] ieee80211: TsStartAddBaProcess()==>BA timer is already added
[29717.735528] ieee80211: TsStartAddBaProcess()==>BA timer is already added
[29719.223287] dm_check_edca_turbo():iot peer is 0x0:unknown, bssid:00:24:d4:60:8d:3c
[29729.809312] =============>ARFR0+rate_index*4:0x100ff005
[29740.632102] ====================>rx ADDBAREQ from :00:24:d4:60:8d:3c
[29740.632106] =====>to send ADDBARSP
[29769.540359] =============>ARFR0+rate_index*4:0x100ff005
[29829.411248] =============>ARFR0+rate_index*4:0x100ff005
[29909.300981] =============>ARFR0+rate_index*4:0x100ff005
[30009.042702] =============>ARFR0+rate_index*4:0x100ff005
[30128.784050] =============>ARFR0+rate_index*4:0x100ff005
[30248.493328] =============>ARFR0+rate_index*4:0x100ff005
[30368.202919] =============>ARFR0+rate_index*4:0x100ff005
[30461.396107] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30461.396114] ============>HTIOTActIsForcedRTSCTS(), 0
[30461.396118] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30461.397897] ===>ieee80211_associate_procedure_wq(), chan:11
[30461.448116] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30461.462752] =================>ieee80211_authentication_req():auth->algorithm is 0
[30461.468091] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30461.468094] 
[30461.468114] rtl819xU:qos active process with associate response received
[30461.468116] 
[30461.468126] Associated successfully
[30461.468128] Using G rates:108
[30461.468131] Successfully associated, ht enabled
[30461.520109] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30461.542156] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30461.545756] =============>ARFR0+rate_index*4:0x100ff005
[30461.554397] ============>normal associate
[30461.555087] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30461.555094] ============>HTIOTActIsForcedRTSCTS(), 0
[30461.555098] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30461.556698] ===>ieee80211_associate_procedure_wq(), chan:11
[30461.611058] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30461.628022] =================>ieee80211_authentication_req():auth->algorithm is 0
[30461.633404] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30461.633406] 
[30461.633422] rtl819xU:qos active process with associate response received
[30461.633424] 
[30461.633434] Associated successfully
[30461.633441] Using G rates:108
[30461.633443] Successfully associated, ht enabled
[30461.686659] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30461.700344] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30461.703850] =============>ARFR0+rate_index*4:0x100ff005
[30461.710411] ============>normal associate
[30461.710686] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30461.710693] ============>HTIOTActIsForcedRTSCTS(), 0
[30461.710696] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30461.711809] ===>ieee80211_associate_procedure_wq(), chan:11
[30461.761745] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30461.776217] =================>ieee80211_authentication_req():auth->algorithm is 0
[30461.781442] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30461.781445] 
[30461.781458] rtl819xU:qos active process with associate response received
[30461.781460] 
[30461.781469] Associated successfully
[30461.781472] Using G rates:108
[30461.781474] Successfully associated, ht enabled
[30461.830321] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30461.844420] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30461.847626] =============>ARFR0+rate_index*4:0x100ff005
[30461.854241] ============>normal associate
[30461.854469] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30461.854476] ============>HTIOTActIsForcedRTSCTS(), 0
[30461.854479] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30461.856040] ===>ieee80211_associate_procedure_wq(), chan:11
[30461.905662] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30461.919927] =================>ieee80211_authentication_req():auth->algorithm is 0
[30461.925294] Association response status code 0x1
[30461.925317] ===>ieee80211_associate_procedure_wq(), chan:11
[30461.975027] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30461.988995] =================>ieee80211_authentication_req():auth->algorithm is 0
[30461.994373] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30461.994376] 
[30461.994387] rtl819xU:qos active process with associate response received
[30461.994390] 
[30461.994398] Associated successfully
[30461.994401] Using G rates:108
[30461.994403] Successfully associated, ht enabled
[30462.043260] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30462.057117] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30462.060605] =============>ARFR0+rate_index*4:0x100ff005
[30462.067422] ============>normal associate
[30462.067621] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30462.067628] ============>HTIOTActIsForcedRTSCTS(), 0
[30462.067631] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30462.068976] ===>ieee80211_associate_procedure_wq(), chan:11
[30462.119140] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30462.133189] =================>ieee80211_authentication_req():auth->algorithm is 0
[30462.140437] Association response status code 0x1
[30462.140457] ===>ieee80211_associate_procedure_wq(), chan:11
[30462.189421] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30462.204261] =================>ieee80211_authentication_req():auth->algorithm is 0
[30462.209641] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30462.209643] 
[30462.209653] rtl819xU:qos active process with associate response received
[30462.209655] 
[30462.209662] Associated successfully
[30462.209665] Using G rates:108
[30462.209667] Successfully associated, ht enabled
[30462.262935] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30462.276655] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30462.279883] =============>ARFR0+rate_index*4:0x100ff005
[30462.287486] ============>normal associate
[30462.287690] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30462.287696] ============>HTIOTActIsForcedRTSCTS(), 0
[30462.287700] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30462.288989] ===>ieee80211_associate_procedure_wq(), chan:11
[30462.338748] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30462.353479] =================>ieee80211_authentication_req():auth->algorithm is 0
[30462.359202] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30462.359205] 
[30462.359215] Associated successfully
[30462.359218] Using G rates:108
[30462.359220] Successfully associated, ht enabled
[30462.359230] rtl819xU:qos active process with associate response received
[30462.359232] 
[30462.408131] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30462.422460] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30462.425970] =============>ARFR0+rate_index*4:0x100ff005
[30462.433158] ============>normal associate
[30462.451867] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30462.451874] ============>HTIOTActIsForcedRTSCTS(), 0
[30462.451877] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30462.453332] ===>ieee80211_associate_procedure_wq(), chan:11
[30462.503778] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30462.517815] =================>ieee80211_authentication_req():auth->algorithm is 0
[30462.523137] Association response status code 0x1
[30462.523152] ===>ieee80211_associate_procedure_wq(), chan:11
[30462.572794] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30462.586882] =================>ieee80211_authentication_req():auth->algorithm is 0
[30462.596487] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30462.596489] 
[30462.596508] rtl819xU:qos active process with associate response received
[30462.596510] 
[30462.596519] Associated successfully
[30462.596522] Using G rates:108
[30462.596524] Successfully associated, ht enabled
[30462.645501] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30462.659194] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30462.662055] =============>ARFR0+rate_index*4:0x100ff005
[30462.669038] ============>normal associate
[30462.669257] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30462.669265] ============>HTIOTActIsForcedRTSCTS(), 0
[30462.669268] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30462.670415] ===>ieee80211_associate_procedure_wq(), chan:11
[30462.719585] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30462.733850] =================>ieee80211_authentication_req():auth->algorithm is 0
[30462.761448] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30462.761451] 
[30462.761467] rtl819xU:qos active process with associate response received
[30462.761469] 
[30462.761480] Associated successfully
[30462.761483] Using G rates:108
[30462.761485] Successfully associated, ht enabled
[30462.811156] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30462.825093] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30462.827833] =============>ARFR0+rate_index*4:0x100ff005
[30462.834943] ============>normal associate
[30462.835175] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30462.835182] ============>HTIOTActIsForcedRTSCTS(), 0
[30462.835185] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30462.836345] ===>ieee80211_associate_procedure_wq(), chan:11
[30462.886158] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30462.900122] =================>ieee80211_authentication_req():auth->algorithm is 0
[30462.919582] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30462.919585] 
[30462.919599] rtl819xU:qos active process with associate response received
[30462.919602] 
[30462.919611] Associated successfully
[30462.919614] Using G rates:108
[30462.919616] Successfully associated, ht enabled
[30462.969298] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30462.983179] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30462.986378] =============>ARFR0+rate_index*4:0x100ff005
[30462.993492] ============>normal associate
[30462.993663] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30462.993670] ============>HTIOTActIsForcedRTSCTS(), 0
[30462.993673] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30462.994674] ===>ieee80211_associate_procedure_wq(), chan:11
[30463.043915] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30463.060758] =================>ieee80211_authentication_req():auth->algorithm is 0
[30463.066262] Association response status code 0x1
[30463.066275] ===>ieee80211_associate_procedure_wq(), chan:11
[30463.115875] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30463.129961] =================>ieee80211_authentication_req():auth->algorithm is 0
[30463.135874] Association response status code 0x1
[30463.135888] ===>ieee80211_associate_procedure_wq(), chan:11
[30463.184970] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30463.198982] =================>ieee80211_authentication_req():auth->algorithm is 0
[30463.204387] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30463.204389] 
[30463.204402] rtl819xU:qos active process with associate response received
[30463.204404] 
[30463.204513] Associated successfully
[30463.204517] Using G rates:108
[30463.204519] Successfully associated, ht enabled
[30463.253490] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30463.267544] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30463.270928] =============>ARFR0+rate_index*4:0x100ff005
[30463.277844] ============>normal associate
[30463.278036] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30463.278043] ============>HTIOTActIsForcedRTSCTS(), 0
[30463.278046] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30463.279457] ===>ieee80211_associate_procedure_wq(), chan:11
[30463.329229] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30463.343915] =================>ieee80211_authentication_req():auth->algorithm is 0
[30463.349215] Association response status code 0x1
[30463.349234] ===>ieee80211_associate_procedure_wq(), chan:11
[30463.399118] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30463.413528] =================>ieee80211_authentication_req():auth->algorithm is 0
[30463.419084] Association response status code 0x1
[30463.419100] ===>ieee80211_associate_procedure_wq(), chan:11
[30463.468406] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30463.482383] =================>ieee80211_authentication_req():auth->algorithm is 0
[30463.489140] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30463.489143] 
[30463.489155] rtl819xU:qos active process with associate response received
[30463.489158] 
[30463.489166] Associated successfully
[30463.489169] Using G rates:108
[30463.489171] Successfully associated, ht enabled
[30463.539135] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30463.553982] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30463.557733] =============>ARFR0+rate_index*4:0x100ff005
[30463.566793] ============>normal associate
[30463.567442] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30463.567449] ============>HTIOTActIsForcedRTSCTS(), 0
[30463.567452] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30463.569298] ===>ieee80211_associate_procedure_wq(), chan:11
[30463.623366] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30463.640081] =================>ieee80211_authentication_req():auth->algorithm is 0
[30463.645177] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30463.645180] 
[30463.645193] rtl819xU:qos active process with associate response received
[30463.645195] 
[30463.645204] Associated successfully
[30463.645207] Using G rates:108
[30463.645209] Successfully associated, ht enabled
[30463.697685] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30463.712275] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30463.716363] =============>ARFR0+rate_index*4:0x100ff005
[30463.726624] ============>normal associate
[30463.726795] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30463.726801] ============>HTIOTActIsForcedRTSCTS(), 0
[30463.726805] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30463.728589] ===>ieee80211_associate_procedure_wq(), chan:11
[30463.782038] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30463.798781] =================>ieee80211_authentication_req():auth->algorithm is 0
[30463.804222] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30463.804225] 
[30463.804238] rtl819xU:qos active process with associate response received
[30463.804241] 
[30463.804250] Associated successfully
[30463.804253] Using G rates:108
[30463.804255] Successfully associated, ht enabled
[30463.856088] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30463.870158] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30463.872906] =============>ARFR0+rate_index*4:0x100ff005
[30463.879765] ============>normal associate
[30463.884908] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30463.884912] ============>HTIOTActIsForcedRTSCTS(), 0
[30463.884914] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30463.886872] ===>ieee80211_associate_procedure_wq(), chan:11
[30463.936088] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30463.951067] =================>ieee80211_authentication_req():auth->algorithm is 0
[30463.958395] Association response status code 0x1
[30465.564374] ===>ieee80211_associate_procedure_wq(), chan:11
[30465.616183] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30465.631027] =================>ieee80211_authentication_req():auth->algorithm is 0
[30465.656989] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30465.656992] 
[30465.657005] rtl819xU:qos active process with associate response received
[30465.657007] 
[30465.657016] Associated successfully
[30465.657019] Using G rates:108
[30465.657021] Successfully associated, ht enabled
[30465.706759] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30465.720587] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30465.723975] =============>ARFR0+rate_index*4:0x100ff005
[30465.730657] ============>normal associate
[30465.744249] alg name:CCMP
[30465.744263] rtl819xU:EnableHWSecurityConfig8192(): hwsec: 1, pairwise_key: 4, SECR_value: c
[30465.744425] rtl819xU:setKey(): dev: ffff880103d80000, EntryNo: 4, KeyIndex: 0, KeyType: 4, MacAddr: 00:24:d4:60:8d:3c
[30465.773817] alg name:TKIP
[30465.773833] rtl819xU:setKey(): dev: ffff880103d80000, EntryNo: 1, KeyIndex: 1, KeyType: 2, MacAddr: ff:ff:ff:ff:ff:ff
[30465.823489] ieee80211: TsStartAddBaProcess()==>BA timer is already added
[30470.560247] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30470.560255] ============>HTIOTActIsForcedRTSCTS(), 0
[30470.560258] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30470.560272] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30470.560276] ============>HTIOTActIsForcedRTSCTS(), 0
[30470.560279] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30470.561371] ===>ieee80211_associate_procedure_wq(), chan:11
[30470.610375] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30470.627246] =================>ieee80211_authentication_req():auth->algorithm is 0
[30470.632488] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30470.632490] 
[30470.632504] rtl819xU:qos active process with associate response received
[30470.632506] 
[30470.632581] Associated successfully
[30470.632584] Using G rates:108
[30470.632586] Successfully associated, ht enabled
[30470.682123] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30470.696721] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30470.699803] =============>ARFR0+rate_index*4:0x100ff005
[30470.706790] ============>normal associate
[30470.717095] alg name:CCMP
[30470.717109] rtl819xU:EnableHWSecurityConfig8192(): hwsec: 1, pairwise_key: 4, SECR_value: c
[30470.717305] rtl819xU:setKey(): dev: ffff880103d80000, EntryNo: 4, KeyIndex: 0, KeyType: 4, MacAddr: 00:24:d4:60:8d:3c
[30470.833224] alg name:TKIP
[30470.833240] rtl819xU:setKey(): dev: ffff880103d80000, EntryNo: 1, KeyIndex: 1, KeyType: 2, MacAddr: ff:ff:ff:ff:ff:ff
[30511.340642] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30511.340650] ============>HTIOTActIsForcedRTSCTS(), 0
[30511.340653] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30511.341991] ===>ieee80211_associate_procedure_wq(), chan:11
[30511.392061] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30511.407408] =================>ieee80211_authentication_req():auth->algorithm is 0
[30511.412999] Association response status code 0x1
[30511.413013] ===>ieee80211_associate_procedure_wq(), chan:11
[30511.463632] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30511.480348] =================>ieee80211_authentication_req():auth->algorithm is 0
[30511.485603] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30511.485606] 
[30511.485623] rtl819xU:qos active process with associate response received
[30511.485625] 
[30511.485634] Associated successfully
[30511.485636] Using G rates:108
[30511.485639] Successfully associated, ht enabled
[30511.538477] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30511.553440] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30511.557687] =============>ARFR0+rate_index*4:0x100ff005
[30511.567413] ============>normal associate
[30511.568075] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30511.568082] ============>HTIOTActIsForcedRTSCTS(), 0
[30511.568086] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30511.569590] ===>ieee80211_associate_procedure_wq(), chan:11
[30511.620708] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30511.635688] =================>ieee80211_authentication_req():auth->algorithm is 0
[30511.642523] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30511.642526] 
[30511.642538] rtl819xU:qos active process with associate response received
[30511.642541] 
[30511.642549] Associated successfully
[30511.642552] Using G rates:108
[30511.642554] Successfully associated, ht enabled
[30511.691545] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30511.705597] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30511.709131] =============>ARFR0+rate_index*4:0x100ff005
[30511.716323] ============>normal associate
[30511.716520] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30511.716527] ============>HTIOTActIsForcedRTSCTS(), 0
[30511.716530] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30511.718038] ===>ieee80211_associate_procedure_wq(), chan:11
[30511.767907] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30511.782504] =================>ieee80211_authentication_req():auth->algorithm is 0
[30511.787634] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30511.787636] 
[30511.787651] rtl819xU:qos active process with associate response received
[30511.787653] 
[30511.787667] Associated successfully
[30511.787670] Using G rates:108
[30511.787672] Successfully associated, ht enabled
[30511.837368] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30511.851462] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30511.854660] =============>ARFR0+rate_index*4:0x100ff005
[30511.861516] ============>normal associate
[30511.861709] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30511.861716] ============>HTIOTActIsForcedRTSCTS(), 0
[30511.861719] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30511.863042] ===>ieee80211_associate_procedure_wq(), chan:11
[30511.912352] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30511.926822] =================>ieee80211_authentication_req():auth->algorithm is 0
[30511.932539] Association response status code 0x1
[30511.932559] ===>ieee80211_associate_procedure_wq(), chan:11
[30511.981396] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30511.995496] =================>ieee80211_authentication_req():auth->algorithm is 0
[30512.001393] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30512.001395] 
[30512.001407] rtl819xU:qos active process with associate response received
[30512.001409] 
[30512.001418] Associated successfully
[30512.001420] Using G rates:108
[30512.001422] Successfully associated, ht enabled
[30512.050255] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30512.064100] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30512.067384] =============>ARFR0+rate_index*4:0x100ff005
[30512.074739] ============>normal associate
[30512.074939] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30512.074945] ============>HTIOTActIsForcedRTSCTS(), 0
[30512.074948] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30512.076504] ===>ieee80211_associate_procedure_wq(), chan:11
[30512.128273] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30512.143178] =================>ieee80211_authentication_req():auth->algorithm is 0
[30512.150955] Association response status code 0x1
[30512.150968] ===>ieee80211_associate_procedure_wq(), chan:11
[30512.199445] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30512.213329] =================>ieee80211_authentication_req():auth->algorithm is 0
[30512.220328] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30512.220330] 
[30512.220343] rtl819xU:qos active process with associate response received
[30512.220345] 
[30512.220354] Associated successfully
[30512.220357] Using G rates:108
[30512.220359] Successfully associated, ht enabled
[30512.269219] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30512.283144] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30512.286427] =============>ARFR0+rate_index*4:0x100ff005
[30512.293370] ============>normal associate
[30512.293575] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30512.293581] ============>HTIOTActIsForcedRTSCTS(), 0
[30512.293584] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30512.295046] ===>ieee80211_associate_procedure_wq(), chan:11
[30512.344580] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30512.362485] =================>ieee80211_authentication_req():auth->algorithm is 0
[30512.370230] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30512.370232] 
[30512.370244] rtl819xU:qos active process with associate response received
[30512.370247] 
[30512.370255] Associated successfully
[30512.370258] Using G rates:108
[30512.370260] Successfully associated, ht enabled
[30512.419357] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30512.433365] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30512.436864] =============>ARFR0+rate_index*4:0x100ff005
[30512.443931] ============>normal associate
[30512.444589] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30512.444596] ============>HTIOTActIsForcedRTSCTS(), 0
[30512.444599] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30512.445736] ===>ieee80211_associate_procedure_wq(), chan:11
[30512.495731] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30512.510114] =================>ieee80211_authentication_req():auth->algorithm is 0
[30512.520516] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30512.520519] 
[30512.520532] rtl819xU:qos active process with associate response received
[30512.520535] 
[30512.520543] Associated successfully
[30512.520546] Using G rates:108
[30512.520548] Successfully associated, ht enabled
[30512.569700] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30512.583793] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30512.586505] =============>ARFR0+rate_index*4:0x100ff005
[30512.593741] ============>normal associate
[30512.593942] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30512.593949] ============>HTIOTActIsForcedRTSCTS(), 0
[30512.593952] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30512.595175] ===>ieee80211_associate_procedure_wq(), chan:11
[30512.644952] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30512.659385] =================>ieee80211_authentication_req():auth->algorithm is 0
[30512.665645] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30512.665648] 
[30512.665665] rtl819xU:qos active process with associate response received
[30512.665667] 
[30512.665676] Associated successfully
[30512.665679] Using G rates:108
[30512.665681] Successfully associated, ht enabled
[30512.715022] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30512.728887] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30512.732082] =============>ARFR0+rate_index*4:0x100ff005
[30512.739062] ============>normal associate
[30512.739233] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30512.739239] ============>HTIOTActIsForcedRTSCTS(), 0
[30512.739243] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30512.740339] ===>ieee80211_associate_procedure_wq(), chan:11
[30512.789365] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30512.803992] =================>ieee80211_authentication_req():auth->algorithm is 0
[30512.809220] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30512.809223] 
[30512.809236] rtl819xU:qos active process with associate response received
[30512.809238] 
[30512.809247] Associated successfully
[30512.809250] Using G rates:108
[30512.809252] Successfully associated, ht enabled
[30512.858987] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30512.873446] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30512.877196] =============>ARFR0+rate_index*4:0x100ff005
[30512.884389] ============>normal associate
[30512.884556] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30512.884563] ============>HTIOTActIsForcedRTSCTS(), 0
[30512.884566] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30512.885702] ===>ieee80211_associate_procedure_wq(), chan:11
[30512.935309] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30512.949780] =================>ieee80211_authentication_req():auth->algorithm is 0
[30512.954997] Association response status code 0x1
[30512.955014] ===>ieee80211_associate_procedure_wq(), chan:11
[30513.004017] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30513.017988] =================>ieee80211_authentication_req():auth->algorithm is 0
[30513.022988] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30513.022990] 
[30513.023004] rtl819xU:qos active process with associate response received
[30513.023006] 
[30513.023013] Associated successfully
[30513.023015] Using G rates:108
[30513.023017] Successfully associated, ht enabled
[30513.072253] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30513.086095] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30513.089083] =============>ARFR0+rate_index*4:0x100ff005
[30513.096109] ============>normal associate
[30513.096309] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30513.096315] ============>HTIOTActIsForcedRTSCTS(), 0
[30513.096319] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30513.097502] ===>ieee80211_associate_procedure_wq(), chan:11
[30513.147744] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30513.162212] =================>ieee80211_authentication_req():auth->algorithm is 0
[30513.167718] Association response status code 0x1
[30513.167732] ===>ieee80211_associate_procedure_wq(), chan:11
[30513.217479] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30513.231326] =================>ieee80211_authentication_req():auth->algorithm is 0
[30513.236832] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30513.236834] 
[30513.236846] rtl819xU:qos active process with associate response received
[30513.236848] 
[30513.236857] Associated successfully
[30513.236860] Using G rates:108
[30513.236862] Successfully associated, ht enabled
[30513.286961] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30513.300650] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30513.303760] =============>ARFR0+rate_index*4:0x100ff005
[30513.310624] ============>normal associate
[30513.310795] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30513.310802] ============>HTIOTActIsForcedRTSCTS(), 0
[30513.310805] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30513.312067] ===>ieee80211_associate_procedure_wq(), chan:11
[30513.361460] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30513.376114] =================>ieee80211_authentication_req():auth->algorithm is 0
[30513.381404] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30513.381406] 
[30513.381420] Associated successfully
[30513.381423] Using G rates:108
[30513.381425] Successfully associated, ht enabled
[30513.381436] rtl819xU:qos active process with associate response received
[30513.381438] 
[30513.431160] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30513.446218] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30513.449875] =============>ARFR0+rate_index*4:0x100ff005
[30513.459102] ============>normal associate
[30513.459759] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30513.459765] ============>HTIOTActIsForcedRTSCTS(), 0
[30513.459769] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30513.461398] ===>ieee80211_associate_procedure_wq(), chan:11
[30513.515849] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30513.532102] =================>ieee80211_authentication_req():auth->algorithm is 0
[30513.545446] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30513.545448] 
[30513.545461] rtl819xU:qos active process with associate response received
[30513.545464] 
[30513.545473] Associated successfully
[30513.545475] Using G rates:108
[30513.545477] Successfully associated, ht enabled
[30513.598058] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30513.612276] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30513.615360] =============>ARFR0+rate_index*4:0x100ff005
[30513.623135] ============>normal associate
[30513.623410] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30513.623417] ============>HTIOTActIsForcedRTSCTS(), 0
[30513.623420] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30513.624781] ===>ieee80211_associate_procedure_wq(), chan:11
[30513.674686] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30513.688992] =================>ieee80211_authentication_req():auth->algorithm is 0
[30513.694249] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30513.694252] 
[30513.694264] Associated successfully
[30513.694267] Using G rates:108
[30513.694269] Successfully associated, ht enabled
[30513.694280] rtl819xU:qos active process with associate response received
[30513.694282] 
[30513.743770] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30513.758317] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30513.761309] =============>ARFR0+rate_index*4:0x100ff005
[30513.768793] ============>normal associate
[30513.768994] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30513.769001] ============>HTIOTActIsForcedRTSCTS(), 0
[30513.769004] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30513.770419] ===>ieee80211_associate_procedure_wq(), chan:11
[30513.819518] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30513.834224] =================>ieee80211_authentication_req():auth->algorithm is 0
[30513.839566] Association response status code 0x1
[30513.839579] ===>ieee80211_associate_procedure_wq(), chan:11
[30513.889078] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30513.902801] =================>ieee80211_authentication_req():auth->algorithm is 0
[30513.934034] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30513.934037] 
[30513.934056] rtl819xU:qos active process with associate response received
[30513.934058] 
[30513.934068] Associated successfully
[30513.934071] Using G rates:108
[30513.934073] Successfully associated, ht enabled
[30513.983597] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30513.997324] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30514.000314] =============>ARFR0+rate_index*4:0x100ff005
[30514.007955] ============>normal associate
[30514.008157] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30514.008164] ============>HTIOTActIsForcedRTSCTS(), 0
[30514.008167] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30514.009477] ===>ieee80211_associate_procedure_wq(), chan:11
[30514.059252] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30514.073848] =================>ieee80211_authentication_req():auth->algorithm is 0
[30514.080824] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30514.080826] 
[30514.080839] rtl819xU:qos active process with associate response received
[30514.080841] 
[30514.080850] Associated successfully
[30514.080853] Using G rates:108
[30514.080855] Successfully associated, ht enabled
[30514.129703] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30514.144172] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30514.147877] =============>ARFR0+rate_index*4:0x100ff005
[30514.154491] ============>normal associate
[30514.154660] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30514.154666] ============>HTIOTActIsForcedRTSCTS(), 0
[30514.154669] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30514.156135] ===>ieee80211_associate_procedure_wq(), chan:11
[30514.205913] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30514.220654] =================>ieee80211_authentication_req():auth->algorithm is 0
[30514.230531] Association response status code 0x1
[30514.230594] ===>ieee80211_associate_procedure_wq(), chan:11
[30514.279891] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30514.293954] =================>ieee80211_authentication_req():auth->algorithm is 0
[30514.302815] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30514.302817] 
[30514.302830] rtl819xU:qos active process with associate response received
[30514.302832] 
[30514.302839] Associated successfully
[30514.302842] Using G rates:108
[30514.302844] Successfully associated, ht enabled
[30514.352114] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30514.365836] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30514.369045] =============>ARFR0+rate_index*4:0x100ff005
[30514.376150] ============>normal associate
[30514.379267] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30514.379274] ============>HTIOTActIsForcedRTSCTS(), 0
[30514.379277] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30514.380454] ===>ieee80211_associate_procedure_wq(), chan:11
[30514.398042] read_nic_dword TimeOut! status:-71
[30514.402157] write_nic_dword TimeOut! status:-71
[30514.406270] write_nic_dword TimeOut! status:-71
[30514.410402] read_nic_dword TimeOut! status:-71
[30514.414476] read_nic_dword TimeOut! status:-71
[30514.418611] read_nic_dword TimeOut! status:-71
[30514.422726] read_nic_dword TimeOut! status:-71
[30514.426885] read_nic_dword TimeOut! status:-71
[30514.430979] read_nic_dword TimeOut! status:-71
[30514.435085] read_nic_dword TimeOut! status:-71
[30514.439235] read_nic_dword TimeOut! status:-71
[30514.443322] read_nic_dword TimeOut! status:-71
[30514.447405] read_nic_dword TimeOut! status:-71
[30514.451554] read_nic_dword TimeOut! status:-71
[30514.455641] read_nic_dword TimeOut! status:-71
[30514.459759] read_nic_dword TimeOut! status:-71
[30514.463900] read_nic_dword TimeOut! status:-71
[30514.468020] read_nic_dword TimeOut! status:-71
[30514.472134] read_nic_dword TimeOut! status:-71
[30514.476265] read_nic_dword TimeOut! status:-71
[30514.480339] read_nic_dword TimeOut! status:-71
[30514.484529] read_nic_dword TimeOut! status:-71
[30514.488619] read_nic_dword TimeOut! status:-71
[30514.492719] read_nic_dword TimeOut! status:-71
[30514.496875] read_nic_dword TimeOut! status:-71
[30514.500996] read_nic_dword TimeOut! status:-71
[30514.505023] read_nic_dword TimeOut! status:-71
[30514.509164] read_nic_dword TimeOut! status:-71
[30514.513338] read_nic_dword TimeOut! status:-71
[30514.517383] read_nic_dword TimeOut! status:-71
[30514.521549] write_nic_dword TimeOut! status:-71
[30514.525657] read_nic_dword TimeOut! status:-71
[30514.529808] read_nic_dword TimeOut! status:-71
[30514.533883] read_nic_dword TimeOut! status:-71
[30514.537970] read_nic_dword TimeOut! status:-71
[30514.542058] read_nic_dword TimeOut! status:-71
[30514.546197] read_nic_dword TimeOut! status:-71
[30514.550357] read_nic_dword TimeOut! status:-71
[30514.554433] read_nic_dword TimeOut! status:-71
[30514.558580] read_nic_dword TimeOut! status:-71
[30514.562738] read_nic_dword TimeOut! status:-71
[30514.566821] read_nic_dword TimeOut! status:-71
[30514.570931] read_nic_dword TimeOut! status:-71
[30514.575016] read_nic_dword TimeOut! status:-71
[30514.579132] read_nic_dword TimeOut! status:-71
[30514.583247] read_nic_dword TimeOut! status:-71
[30514.587403] read_nic_dword TimeOut! status:-71
[30514.589333] usb 2-1.5: USB disconnect, address 8
[30514.591550] read_nic_dword TimeOut! status:-71
[30514.591555] read_nic_dword TimeOut! status:-19
[30514.591558] read_nic_dword TimeOut! status:-19
[30514.591561] read_nic_dword TimeOut! status:-19
[30514.591563] read_nic_dword TimeOut! status:-19
[30514.591566] read_nic_dword TimeOut! status:-19
[30514.591569] read_nic_dword TimeOut! status:-19
[30514.591571] read_nic_dword TimeOut! status:-19
[30514.591574] read_nic_dword TimeOut! status:-19
[30514.591576] read_nic_dword TimeOut! status:-19
[30514.591579] read_nic_dword TimeOut! status:-19
[30514.591582] read_nic_dword TimeOut! status:-19
[30514.591584] read_nic_dword TimeOut! status:-19
[30514.591587] read_nic_dword TimeOut! status:-19
[30514.591589] read_nic_dword TimeOut! status:-19
[30514.591592] read_nic_dword TimeOut! status:-19
[30514.591595] read_nic_dword TimeOut! status:-19
[30514.591597] read_nic_dword TimeOut! status:-19
[30514.591600] read_nic_dword TimeOut! status:-19
[30514.591602] read_nic_dword TimeOut! status:-19
[30514.591605] read_nic_dword TimeOut! status:-19
[30514.591608] read_nic_dword TimeOut! status:-19
[30514.591610] read_nic_dword TimeOut! status:-19
[30514.591613] read_nic_dword TimeOut! status:-19
[30514.591615] read_nic_dword TimeOut! status:-19
[30514.591618] read_nic_dword TimeOut! status:-19
[30514.591621] read_nic_dword TimeOut! status:-19
[30514.591623] read_nic_dword TimeOut! status:-19
[30514.591626] read_nic_dword TimeOut! status:-19
[30514.591628] read_nic_dword TimeOut! status:-19
[30514.591631] read_nic_dword TimeOut! status:-19
[30514.591634] read_nic_dword TimeOut! status:-19
[30514.591636] read_nic_dword TimeOut! status:-19
[30514.591639] read_nic_dword TimeOut! status:-19
[30514.591642] read_nic_dword TimeOut! status:-19
[30514.591645] write_nic_dword TimeOut! status:-19
[30514.591647] write_nic_dword TimeOut! status:-19
[30514.591650] read_nic_dword TimeOut! status:-19
[30514.591653] read_nic_dword TimeOut! status:-19
[30514.591655] read_nic_dword TimeOut! status:-19
[30514.591658] read_nic_dword TimeOut! status:-19
[30514.591661] read_nic_dword TimeOut! status:-19
[30514.591663] read_nic_dword TimeOut! status:-19
[30514.591666] read_nic_dword TimeOut! status:-19
[30514.591669] read_nic_dword TimeOut! status:-19
[30514.591671] read_nic_dword TimeOut! status:-19
[30514.591674] read_nic_dword TimeOut! status:-19
[30514.591676] read_nic_dword TimeOut! status:-19
[30514.591679] read_nic_dword TimeOut! status:-19
[30514.591682] read_nic_dword TimeOut! status:-19
[30514.591684] read_nic_dword TimeOut! status:-19
[30514.591687] read_nic_dword TimeOut! status:-19
[30514.591689] read_nic_dword TimeOut! status:-19
[30514.591692] read_nic_dword TimeOut! status:-19
[30514.591695] read_nic_dword TimeOut! status:-19
[30514.591697] read_nic_dword TimeOut! status:-19
[30514.591700] read_nic_dword TimeOut! status:-19
[30514.591703] read_nic_dword TimeOut! status:-19
[30514.591705] read_nic_dword TimeOut! status:-19
[30514.591708] read_nic_dword TimeOut! status:-19
[30514.591710] read_nic_dword TimeOut! status:-19
[30514.591713] read_nic_dword TimeOut! status:-19
[30514.591716] read_nic_dword TimeOut! status:-19
[30514.591718] read_nic_dword TimeOut! status:-19
[30514.591721] read_nic_dword TimeOut! status:-19
[30514.591723] read_nic_dword TimeOut! status:-19
[30514.591726] read_nic_dword TimeOut! status:-19
[30514.591729] read_nic_dword TimeOut! status:-19
[30514.591731] read_nic_dword TimeOut! status:-19
[30514.591734] read_nic_dword TimeOut! status:-19
[30514.591736] read_nic_dword TimeOut! status:-19
[30514.591739] read_nic_dword TimeOut! status:-19
[30514.591742] read_nic_dword TimeOut! status:-19
[30514.591744] read_nic_dword TimeOut! status:-19
[30514.591747] read_nic_dword TimeOut! status:-19
[30514.591749] read_nic_dword TimeOut! status:-19
[30514.591752] read_nic_dword TimeOut! status:-19
[30514.591755] read_nic_dword TimeOut! status:-19
[30514.591757] read_nic_dword TimeOut! status:-19
[30514.591760] read_nic_dword TimeOut! status:-19
[30514.591763] read_nic_dword TimeOut! status:-19
[30514.591765] read_nic_dword TimeOut! status:-19
[30514.591768] read_nic_dword TimeOut! status:-19
[30514.591770] read_nic_dword TimeOut! status:-19
[30514.591773] read_nic_dword TimeOut! status:-19
[30514.591776] read_nic_dword TimeOut! status:-19
[30514.591778] read_nic_dword TimeOut! status:-19
[30514.611743] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30514.611755] read_nic_byte TimeOut! status:-19
[30514.611758] read_nic_byte TimeOut! status:-19
[30514.611760] write_nic_byte TimeOut! status:-19
[30514.611764] read_nic_dword TimeOut! status:-19
[30514.611766] read_nic_byte TimeOut! status:-19
[30514.611769] read_nic_dword TimeOut! status:-19
[30514.611772] write_nic_dword TimeOut! status:-19
[30514.611775] read_nic_dword TimeOut! status:-19
[30514.611777] read_nic_byte TimeOut! status:-19
[30514.611780] read_nic_dword TimeOut! status:-19
[30514.611783] write_nic_dword TimeOut! status:-19
[30514.611785] read_nic_dword TimeOut! status:-19
[30514.611788] read_nic_byte TimeOut! status:-19
[30514.611791] read_nic_dword TimeOut! status:-19
[30514.611793] write_nic_dword TimeOut! status:-19
[30514.611796] write_nic_dword TimeOut! status:-19
[30514.611799] read_nic_dword TimeOut! status:-19
[30514.611802] read_nic_dword TimeOut! status:-19
[30514.611805] write_nic_dword TimeOut! status:-19
[30514.611807] write_nic_dword TimeOut! status:-19
[30514.611810] read_nic_dword TimeOut! status:-19
[30514.611814] =================>ieee80211_authentication_req():auth->algorithm is 0
[30514.611820] rtl819xU:Error TX URB 0, error -19
[30514.647096] rtl819xU:==========>rtl8192_down()
[30514.647099] 
[30514.647103] read_nic_byte TimeOut! status:-19
[30514.647107] write_nic_byte TimeOut! status:-19
[30514.657121] rtl819xU:<==========rtl8192_down()
[30514.657123] 
[30514.657128] read_nic_dword TimeOut! status:-19
[30514.657131] write_nic_dword TimeOut! status:-19
[30514.657134] read_nic_byte TimeOut! status:-19
[30514.657137] write_nic_byte TimeOut! status:-19
[30514.708086] rtl819xU:=============>wlan driver to be removed
[30514.708089] 
[30514.718973] rtl819xU:wlan driver removed
[30514.718976] 
[30564.898363] usb 2-1.5: new high speed USB device using ehci_hcd and address 9
[30565.012423] ==>ep_num:4, in_ep_num:1, out_ep_num:3
[30565.012426] ==>RtInPipes:3  
[30565.012430] ==>RtOutPipes:4  6  13  
[30565.012434] ==>txqueue_to_outpipemap for BK, BE, VI, VO, HCCA, TXCMD, MGNT, HIGH, BEACON:
[30565.012438] 1  1  0  0  2  2  2  2  2  
[30565.265875] Dot11d_Init()
[30565.286062] rtl819xU:FirmwareRequest92S(): signature: 8192, version: 902b, size: 30, imemsize: 7408, sram size: 9688
[30565.287051] rtl819xU:FirmwareCheckReady(): LoadFWStatus(1), success
[30565.290829] rtl819xU:FirmwareCheckReady(): LoadFWStatus(2), success
[30565.290960] rtl819xU:FirmwareCheckReady(): DMEM code download success, CPUStatus(0x3f)
[30565.292309] rtl819xU:FirmwareCheckReady(): polling load firmware ready, CPUStatus(ff)
[30565.293283] rtl819xU:FirmwareCheckReady(): Current RCR settings(0x157e20e)
[30565.293408] rtl819xU:FirmwareCheckReady(): LoadFWStatus(3), success
[30565.293411] rtl819xU:FirmwareDownload92S(): Firmware Download Success
[30568.068546] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[30587.934136] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30587.934144] ============>HTIOTActIsForcedRTSCTS(), 0
[30587.934147] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30587.934161] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[30587.934166] ============>HTIOTActIsForcedRTSCTS(), 0
[30587.934169] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[30587.935628] ===>ieee80211_associate_procedure_wq(), chan:11
[30587.986277] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30588.000508] =================>ieee80211_authentication_req():auth->algorithm is 0
[30588.027078] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[30588.027081] 
[30588.027095] rtl819xU:qos active process with associate response received
[30588.027097] 
[30588.027107] Associated successfully
[30588.027110] Using G rates:108
[30588.027112] Successfully associated, ht enabled
[30588.076429] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[30588.090819] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[30588.094516] =============>ARFR0+rate_index*4:0x100ff005
[30588.102002] ============>normal associate
[30588.102610] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[30588.105300] alg name:CCMP
[30588.105313] rtl819xU:EnableHWSecurityConfig8192(): hwsec: 1, pairwise_key: 4, SECR_value: c
[30588.105493] rtl819xU:setKey(): dev: ffff8800dacb0000, EntryNo: 4, KeyIndex: 0, KeyType: 4, MacAddr: 00:24:d4:60:8d:3c
[30588.208483] alg name:TKIP
[30588.208499] rtl819xU:setKey(): dev: ffff8800dacb0000, EntryNo: 1, KeyIndex: 1, KeyType: 2, MacAddr: ff:ff:ff:ff:ff:ff
[30588.212587] ieee80211: TsStartAddBaProcess()==>BA timer is already added
[30619.749075] =============>ARFR0+rate_index*4:0x100ff005
[30636.113687] ====================>rx ADDBAREQ from :00:24:d4:60:8d:3c
[30636.113691] =====>to send ADDBARSP
[30659.672864] =============>ARFR0+rate_index*4:0x100ff005
[30719.505757] =============>ARFR0+rate_index*4:0x100ff005
[30799.310818] =============>ARFR0+rate_index*4:0x100ff005
[30899.087621] =============>ARFR0+rate_index*4:0x100ff005
[31013.724998] svc: failed to register lockdv1 RPC service (errno 97).
[31018.875244] =============>ARFR0+rate_index*4:0x100ff005
[31138.589971] =============>ARFR0+rate_index*4:0x100ff005
[31258.340423] =============>ARFR0+rate_index*4:0x100ff005
[31378.107655] =============>ARFR0+rate_index*4:0x100ff005
[31497.801825] =============>ARFR0+rate_index*4:0x100ff005
[31617.590577] =============>ARFR0+rate_index*4:0x100ff005
[31737.340016] =============>ARFR0+rate_index*4:0x100ff005
[31857.060338] =============>ARFR0+rate_index*4:0x100ff005
[31976.822166] =============>ARFR0+rate_index*4:0x100ff005
[32096.551866] =============>ARFR0+rate_index*4:0x100ff005
[32216.301666] =============>ARFR0+rate_index*4:0x100ff005
[32336.032755] =============>ARFR0+rate_index*4:0x100ff005
[32366.033284] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[32366.174172] EXT4-fs (sda3): re-mounted. Opts: commit=0
[32367.208217] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32367.208225] ============>HTIOTActIsForcedRTSCTS(), 0
[32367.208228] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32367.209458] ===>ieee80211_associate_procedure_wq(), chan:11
[32367.258717] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32367.277051] =================>ieee80211_authentication_req():auth->algorithm is 0
[32367.283143] Association response status code 0x1
[32367.283159] ===>ieee80211_associate_procedure_wq(), chan:11
[32367.325115] rtl819xU:==========>rtl8192_down()
[32367.325118] 
[32367.332652] rtl819xU:PHY_SetBWMode8192S() SetBWModeInProgress FALSE driver sleep or unload
[32367.332655] 
[32367.332660] =================>ieee80211_authentication_req():auth->algorithm is 0
[32367.337497] rtl819xU:<==========rtl8192_down()
[32367.337499] 
[32368.696273] PM: Syncing filesystems ... done.
[32368.701760] PM: Preparing system for mem sleep
[32368.701767] Freezing user space processes ... (elapsed 0.02 seconds) done.
[32368.722096] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[32368.742057] PM: Entering mem sleep
[32368.742114] Suspending console(s) (use no_console_suspend to debug)
[32368.742614] rtl819xU:============> r8192U suspend call.
[32368.742617] 
[32368.742619] netif not running, go out suspend function
[32368.743148] sd 7:0:0:0: [sdf] Synchronizing SCSI cache
[32368.743185] sd 5:0:0:0: [sde] Synchronizing SCSI cache
[32368.743358] sd 5:0:0:0: [sde] Stopping disk
[32368.743461] sd 7:0:0:0: [sdf] Stopping disk
[32368.743571] sd 4:0:0:0: [sdd] Synchronizing SCSI cache
[32368.743641] sd 4:0:0:0: [sdd] Stopping disk
[32368.743827] sd 3:0:0:0: [sdc] Synchronizing SCSI cache
[32368.743993] sd 3:0:0:0: [sdc] Stopping disk
[32368.744026] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[32368.744250] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[32368.744456] sd 0:0:0:0: [sda] Stopping disk
[32368.745777] sd 2:0:0:0: [sdb] Stopping disk
[32368.761982] ACPI handle has no context!
[32368.782177] ahci 0000:03:00.0: PCI INT A disabled
[32368.800915] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[32368.852459] HDA Intel 0000:00:1b.0: PCI INT A disabled
[32368.852484] ACPI handle has no context!
[32368.860785] PM: suspend of drv:usb dev:1-1 complete after 116.868 msecs
[32368.860951] PM: suspend of drv:usb dev:usb1 complete after 116.613 msecs
[32368.871759] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 126.209 msecs
[32368.888344] PM: suspend of drv:sd dev:4:0:0:0 complete after 145.085 msecs
[32368.888418] PM: suspend of drv:scsi dev:target4:0:0 complete after 145.077 msecs
[32368.888457] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[32368.888462] PM: suspend of drv:ehci_hcd dev:0000:00:1a.0 complete after 142.938 msecs
[32368.888496] PM: suspend of drv:scsi dev:host4 complete after 144.394 msecs
[32369.023636] PM: suspend of drv:sd dev:2:0:0:0 complete after 280.218 msecs
[32369.023717] PM: suspend of drv:scsi dev:target2:0:0 complete after 280.295 msecs
[32369.023739] PM: suspend of drv:scsi dev:host2 complete after 279.905 msecs
[32369.160202] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 416.201 msecs
[32369.276552] PM: suspend of drv:sd dev:0:0:0:0 complete after 533.456 msecs
[32369.276634] PM: suspend of drv:scsi dev:target0:0:0 complete after 533.392 msecs
[32369.276720] PM: suspend of drv:scsi dev:host0 complete after 533.381 msecs
[32369.277163] pata_jmicron 0000:03:00.1: PCI INT B disabled
[32369.289922] PM: suspend of drv:pata_jmicron dev:0000:03:00.1 complete after 546.345 msecs
[32369.290001] PM: suspend of drv:pcieport dev:0000:00:1c.6 complete after 546.188 msecs
[32369.290097] PM: suspend of drv: dev:pci0000:00 complete after 545.417 msecs
[32369.290114] PM: suspend of devices complete after 548.979 msecs
[32369.290119] PM: suspend devices took 0.550 seconds
[32369.290250] r8169 0000:07:04.0: PME# enabled
[32369.290266] pci 0000:00:1e.0: wake-up capability enabled by ACPI
[32369.309941] r8169 0000:02:00.0: PME# enabled
[32369.309954] pcieport 0000:00:1c.7: wake-up capability enabled by ACPI
[32369.369914] PM: late suspend of devices complete after 79.963 msecs
[32369.370169] ACPI: Preparing to enter system sleep state S3
[32369.370846] PM: Saving platform NVS memory
[32369.374110] Disabling non-boot CPUs ...
[32369.400054] Broke affinity for irq 42
[32369.401091] CPU 1 is now offline
[32369.409990] Broke affinity for irq 43
[32369.411015] CPU 2 is now offline
[32369.429890] Broke affinity for irq 44
[32369.430908] CPU 3 is now offline
[32369.430910] SMP alternatives: switching to UP code
[32369.435678] Extended CMOS year: 2000
[32369.436049] Back to C!
[32369.436052] PM: Restoring platform NVS memory
[32369.438558] Extended CMOS year: 2000
[32369.438593] Enabling non-boot CPUs ...
[32369.438739] SMP alternatives: switching to SMP code
[32369.443661] Booting Node 0 Processor 1 APIC 0x2
[32369.692215] CPU1 is up
[32369.693468] Booting Node 0 Processor 2 APIC 0x4
[32370.031784] hpet: hpet5 irq 43 for MSI
[32370.031829] CPU2 is up
[32370.034313] Booting Node 0 Processor 3 APIC 0x6
[32370.351500] hpet: hpet6 irq 44 for MSI
[32370.351573] CPU3 is up
[32370.353530] ACPI: Waking up from system sleep state S3
[32370.354058] pcieport 0000:00:03.0: restoring config space at offset 0xf (was 0x100, writing 0x1a010a)
[32370.354064] pcieport 0000:00:03.0: restoring config space at offset 0x9 (was 0x10001, writing 0xeff1e001)
[32370.354066] pcieport 0000:00:03.0: restoring config space at offset 0x8 (was 0x0, writing 0xf7c0f400)
[32370.354069] pcieport 0000:00:03.0: restoring config space at offset 0x7 (was 0x0, writing 0xb0b0)
[32370.354071] pcieport 0000:00:03.0: restoring config space at offset 0x6 (was 0x0, writing 0x10100)
[32370.354075] pcieport 0000:00:03.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10008)
[32370.354078] pcieport 0000:00:03.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[32370.354106] pci 0000:00:08.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[32370.354124] pci 0000:00:08.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[32370.354143] pci 0000:00:08.2: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[32370.354156] pci 0000:00:08.3: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[32370.354168] pci 0000:00:10.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[32370.354180] pci 0000:00:10.1: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[32370.354209] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[32370.354240] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[32370.354244] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[32370.354264] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x20105)
[32370.354271] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0xf031f021)
[32370.354274] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0xf010f000)
[32370.354277] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x200000f0, writing 0x20001010)
[32370.354282] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[32370.354286] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507)
[32370.354314] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x20100, writing 0x20105)
[32370.354321] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x1fff1, writing 0xf071f061)
[32370.354324] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0xfff0, writing 0xf050f040)
[32370.354327] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x200000f0, writing 0x20002020)
[32370.354333] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[32370.354336] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100104, writing 0x100507)
[32370.354364] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x20200, writing 0x2020a)
[32370.354371] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x1fff1, writing 0xf0b1f0a1)
[32370.354374] pcieport 0000:00:1c.5: restoring config space at offset 0x8 (was 0xfff0, writing 0xf090f080)
[32370.354377] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0x200000f0, writing 0x20003030)
[32370.354383] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[32370.354387] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100104, writing 0x100507)
[32370.354415] pcieport 0000:00:1c.6: restoring config space at offset 0xf (was 0x20300, writing 0x2030f)
[32370.354422] pcieport 0000:00:1c.6: restoring config space at offset 0x9 (was 0x1fff1, writing 0xf0d1f0c1)
[32370.354429] pcieport 0000:00:1c.6: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[32370.354432] pcieport 0000:00:1c.6: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[32370.354460] pcieport 0000:00:1c.7: restoring config space at offset 0xf (was 0x20400, writing 0x2040b)
[32370.354472] pcieport 0000:00:1c.7: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[32370.354476] pcieport 0000:00:1c.7: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[32370.354517] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[32370.354534] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff)
[32370.354601] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[32370.354642] nvidia 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[32370.354648] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xbc01)
[32370.354652] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xf4000004)
[32370.354655] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xe000000c)
[32370.354658] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf6000000)
[32370.354662] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[32370.354694] ahci 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10f)
[32370.354715] ahci 0000:03:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x800008)
[32370.354722] ahci 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)
[32370.354755] pata_jmicron 0000:03:00.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[32370.354777] pata_jmicron 0000:03:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[32370.354834] r8169 0000:02:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[32370.354962] PM: early resume of devices complete after 0.941 msecs
[32370.355339] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[32370.355348] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[32370.355386] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[32370.355393] HDA Intel 0000:00:1b.0: setting latency timer to 64
[32370.355433] HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[32370.355479] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[32370.355483] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[32370.355497] pci 0000:00:1e.0: setting latency timer to 64
[32370.355505] ahci 0000:00:1f.2: setting latency timer to 64
[32370.355552] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[32370.355557] ahci 0000:03:00.0: setting latency timer to 64
[32370.355599] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[32370.355603] pata_jmicron 0000:03:00.1: setting latency timer to 64
[32370.355616] pcieport 0000:00:1c.7: wake-up capability disabled by ACPI
[32370.355620] r8169 0000:02:00.0: PME# disabled
[32370.355882] pci 0000:00:1e.0: wake-up capability disabled by ACPI
[32370.355887] r8169 0000:07:04.0: PME# disabled
[32370.360385] sd 0:0:0:0: [sda] Starting disk
[32370.360493] sd 2:0:0:0: [sdb] Starting disk
[32370.360507] sd 3:0:0:0: [sdc] Starting disk
[32370.360806] sd 4:0:0:0: [sdd] Starting disk
[32370.361037] sd 5:0:0:0: [sde] Starting disk
[32370.361052] sd 7:0:0:0: [sdf] Starting disk
[32370.490471] firewire_core: skipped bus generations, destroying all nodes
[32370.521746] PM: resume of drv:firewire_ohci dev:0000:07:03.0 complete after 166.474 msecs
[32370.522087] rtl819xU:================>r8192U resume call.
[32370.522088] netif not running, go out resume function
[32370.522092] PM: resume of drv:usb dev:2-1.5 complete after 151.877 msecs
[32370.522136] PM: resume of drv:rtl819xU dev:2-1.5:1.0 complete after 151.913 msecs
[32370.522616] PM: resume of drv:usb dev:2-1.8 complete after 161.973 msecs
[32370.522628] PM: resume of drv:usbhid dev:2-1.8:1.2 complete after 161.956 msecs
[32370.522633] PM: resume of drv:usbhid dev:2-1.8:1.1 complete after 161.971 msecs
[32370.522651] PM: resume of drv:usb dev:2-1.2 complete after 162.143 msecs
[32370.522662] PM: resume of drv:usbfs dev:2-1.2:1.0 complete after 162.093 msecs
[32370.522689] PM: resume of drv:usbhid dev:2-1.8:1.0 complete after 162.036 msecs
[32370.524002] PM: resume of drv:usb dev:2-1.7 complete after 163.432 msecs
[32370.524009] PM: resume of drv:usbhid dev:2-1.7:1.1 complete after 163.381 msecs
[32370.524043] PM: resume of drv:usbhid dev:2-1.7:1.0 complete after 163.449 msecs
[32370.707142] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 352.400 msecs
[32370.720097] ata9: SATA link down (SStatus 0 SControl 300)
[32370.729702] ata10: SATA link down (SStatus 0 SControl 300)
[32370.739674] ata7: SATA link down (SStatus 0 SControl 300)
[32370.989780] firewire_core: rediscovered device fw0
[32372.296293] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[32372.301701] ata5.00: configured for UDMA/133
[32372.340219] PM: resume of drv:sd dev:4:0:0:0 complete after 1983.700 msecs
[32372.340238] PM: resume of drv:scsi_device dev:4:0:0:0 complete after 1983.687 msecs
[32373.234254] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[32373.334191] ata6.00: configured for UDMA/133
[32373.373741] PM: resume of drv:sd dev:5:0:0:0 complete after 3019.232 msecs
[32373.373819] PM: resume of drv:scsi_device dev:5:0:0:0 complete after 3019.307 msecs
[32373.464768] ata1.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
[32373.464770] ata1.01: ACPI cmd ef/03:46:00:00:00:b0 (SET FEATURES) filtered out
[32373.504306] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[32373.504313] ata1.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES) filtered out
[32373.564487] ata1.00: configured for UDMA/100
[32373.604656] ata1.01: configured for UDMA/66
[32373.630557] PM: resume of drv:sd dev:0:0:0:0 complete after 3277.258 msecs
[32373.630578] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 3237.040 msecs
[32373.630605] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3277.304 msecs
[32374.232708] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[32374.234174] ata4.00: configured for UDMA/133
[32374.255891] PM: resume of drv:sd dev:3:0:0:0 complete after 3903.826 msecs
[32374.255910] PM: resume of drv:scsi_device dev:3:0:0:0 complete after 3903.611 msecs
[32375.289806] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[32375.379043] ata8.00: configured for UDMA/133
[32375.389587] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[32375.398830] ata3.00: configured for UDMA/133
[32375.410761] PM: resume of drv:sd dev:2:0:0:0 complete after 5061.214 msecs
[32375.410782] PM: resume of drv:scsi_disk dev:2:0:0:0 complete after 1784.042 msecs
[32375.410812] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 5061.261 msecs
[32375.484635] PM: resume of drv:sd dev:7:0:0:0 complete after 5134.687 msecs
[32375.484705] PM: resume of drv:scsi_device dev:7:0:0:0 complete after 5125.378 msecs
[32375.484844] PM: resume of drv:scsi dev:host10 complete after 5125.484 msecs
[32375.484867] PM: resume of drv:scsi dev:target10:0:1 complete after 5125.440 msecs
[32375.484883] PM: resume of drv:sr dev:10:0:1:0 complete after 5125.446 msecs
[32375.484895] PM: resume of drv:scsi_device dev:10:0:1:0 complete after 5125.450 msecs
[32375.484920] PM: resume of drv:scsi dev:target10:0:0 complete after 5125.525 msecs
[32375.484927] PM: resume of drv:scsi_host dev:host10 complete after 5125.546 msecs
[32375.484967] PM: resume of drv:sr dev:10:0:0:0 complete after 5125.560 msecs
[32375.484989] PM: resume of drv:scsi_device dev:10:0:0:0 complete after 5125.573 msecs
[32375.485039] PM: resume of devices complete after 5141.173 msecs
[32375.485216] PM: resume devices took 5.140 seconds
[32375.485247] PM: Finishing wakeup.
[32375.485248] Restarting tasks ... done.
[32375.537285] r8169 0000:02:00.0: eth0: link down
[32375.537568] ADDRCONF(NETDEV_UP): eth0: link is not ready
[32375.538757] r8169 0000:07:04.0: eth1: link down
[32375.539012] ADDRCONF(NETDEV_UP): eth1: link is not ready
[32375.555461] rtl819xU:FirmwareCheckReady(): LoadFWStatus(1), success
[32375.558582] rtl819xU:FirmwareCheckReady(): LoadFWStatus(2), success
[32375.558704] rtl819xU:FirmwareCheckReady(): DMEM code download success, CPUStatus(0x3f)
[32375.560079] rtl819xU:FirmwareCheckReady(): polling load firmware ready, CPUStatus(ff)
[32375.561074] rtl819xU:FirmwareCheckReady(): Current RCR settings(0x157e20e)
[32375.561195] rtl819xU:FirmwareCheckReady(): LoadFWStatus(3), success
[32375.561197] rtl819xU:FirmwareDownload92S(): Firmware Download Success
[32378.367982] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[32378.966529] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[32379.211870] EXT4-fs (sda3): re-mounted. Opts: commit=0
[32386.896815] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32386.896823] ============>HTIOTActIsForcedRTSCTS(), 0
[32386.896826] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32386.896839] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32386.896844] ============>HTIOTActIsForcedRTSCTS(), 0
[32386.896847] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32386.898427] ===>ieee80211_associate_procedure_wq(), chan:11
[32386.948778] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32386.963233] =================>ieee80211_authentication_req():auth->algorithm is 0
[32386.974820] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32386.974823] 
[32386.974838] rtl819xU:qos active process with associate response received
[32386.974840] 
[32386.974849] Associated successfully
[32386.974852] Using G rates:108
[32386.974854] Successfully associated, ht enabled
[32387.024577] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32387.038145] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32387.041258] =============>ARFR0+rate_index*4:0x100ff005
[32387.048496] ============>normal associate
[32387.049101] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[32387.058451] alg name:CCMP
[32387.058470] rtl819xU:EnableHWSecurityConfig8192(): hwsec: 1, pairwise_key: 4, SECR_value: c
[32387.058634] rtl819xU:setKey(): dev: ffff8800dacb0000, EntryNo: 4, KeyIndex: 0, KeyType: 4, MacAddr: 00:24:d4:60:8d:3c
[32387.068545] alg name:TKIP
[32387.068560] rtl819xU:setKey(): dev: ffff8800dacb0000, EntryNo: 1, KeyIndex: 1, KeyType: 2, MacAddr: ff:ff:ff:ff:ff:ff
[32387.072612] ieee80211: TsStartAddBaProcess()==>BA timer is already added
[32399.870051] =============>ARFR0+rate_index*4:0x100ff005
[32434.928341] ====================>rx ADDBAREQ from :00:24:d4:60:8d:3c
[32434.928348] =====>to send ADDBARSP
[32439.813341] =============>ARFR0+rate_index*4:0x100ff005
[32499.670425] =============>ARFR0+rate_index*4:0x100ff005
[32579.517924] =============>ARFR0+rate_index*4:0x100ff005
[32602.582296] usb 2-1.5: USB disconnect, address 9
[32602.666872] rtl819xU:==========>rtl8192_down()
[32602.666875] 
[32602.666880] read_nic_byte TimeOut! status:-19
[32602.666883] write_nic_byte TimeOut! status:-19
[32602.676903] rtl819xU:Error TX URB 0, error -19
[32602.676909] rtl819xU:Error TX URB 0, error -19
[32602.676912] rtl819xU:<==========rtl8192_down()
[32602.676914] 
[32602.676921] read_nic_dword TimeOut! status:-19
[32602.676924] write_nic_dword TimeOut! status:-19
[32602.676927] read_nic_byte TimeOut! status:-19
[32602.676930] write_nic_byte TimeOut! status:-19
[32604.103760] rtl819xU:=============>wlan driver to be removed
[32604.103764] 
[32604.114375] rtl819xU:wlan driver removed
[32604.114378] 
[32607.925649] usb 2-1.5: new high speed USB device using ehci_hcd and address 10
[32608.039380] ==>ep_num:4, in_ep_num:1, out_ep_num:3
[32608.039384] ==>RtInPipes:3  
[32608.039388] ==>RtOutPipes:4  6  13  
[32608.039392] ==>txqueue_to_outpipemap for BK, BE, VI, VO, HCCA, TXCMD, MGNT, HIGH, BEACON:
[32608.039395] 1  1  0  0  2  2  2  2  2  
[32608.296919] Dot11d_Init()
[32608.322395] rtl819xU:FirmwareRequest92S(): signature: 8192, version: 902b, size: 30, imemsize: 7408, sram size: 9688
[32608.323459] rtl819xU:FirmwareCheckReady(): LoadFWStatus(1), success
[32608.327072] rtl819xU:FirmwareCheckReady(): LoadFWStatus(2), success
[32608.327320] rtl819xU:FirmwareCheckReady(): DMEM code download success, CPUStatus(0x3f)
[32608.328443] rtl819xU:FirmwareCheckReady(): polling load firmware ready, CPUStatus(ff)
[32608.329440] rtl819xU:FirmwareCheckReady(): Current RCR settings(0x157e20e)
[32608.329565] rtl819xU:FirmwareCheckReady(): LoadFWStatus(3), success
[32608.329568] rtl819xU:FirmwareDownload92S(): Firmware Download Success
[32611.069880] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[32624.585407] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32624.585415] ============>HTIOTActIsForcedRTSCTS(), 0
[32624.585418] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32624.585431] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32624.585436] ============>HTIOTActIsForcedRTSCTS(), 0
[32624.585438] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32624.586631] ===>ieee80211_associate_procedure_wq(), chan:11
[32624.636146] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32624.650704] =================>ieee80211_authentication_req():auth->algorithm is 0
[32624.656716] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32624.656718] 
[32624.656734] rtl819xU:qos active process with associate response received
[32624.656736] 
[32624.656745] Associated successfully
[32624.656748] Using G rates:108
[32624.656750] Successfully associated, ht enabled
[32624.657449] ieee80211:  in GetTs(), TID(12) is not valid
[32624.657453] ieee80211: can't get TS for RXTS in ieee80211_rx_DELBA()
[32624.706847] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32624.720567] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32624.723898] =============>ARFR0+rate_index*4:0x100ff005
[32624.730638] ============>normal associate
[32624.731242] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[32624.736099] alg name:CCMP
[32624.736122] rtl819xU:EnableHWSecurityConfig8192(): hwsec: 1, pairwise_key: 4, SECR_value: c
[32624.736404] rtl819xU:setKey(): dev: ffff8800dacb0000, EntryNo: 4, KeyIndex: 0, KeyType: 4, MacAddr: 00:24:d4:60:8d:3c
[32624.846399] alg name:TKIP
[32624.846414] rtl819xU:setKey(): dev: ffff8800dacb0000, EntryNo: 1, KeyIndex: 1, KeyType: 2, MacAddr: ff:ff:ff:ff:ff:ff
[32624.850438] ieee80211: TsStartAddBaProcess()==>BA timer is already added
[32625.845979] alg name:TKIP
[32625.845988] rtl819xU:setKey(): dev: ffff8800dacb0000, EntryNo: 1, KeyIndex: 1, KeyType: 2, MacAddr: ff:ff:ff:ff:ff:ff
[32663.334625] =============>ARFR0+rate_index*4:0x100ff005
[32703.191244] =============>ARFR0+rate_index*4:0x100ff005
[32763.127759] =============>ARFR0+rate_index*4:0x100ff005
[32775.159383] ====================>rx ADDBAREQ from :00:24:d4:60:8d:3c
[32775.159390] =====>to send ADDBARSP
[32842.924770] =============>ARFR0+rate_index*4:0x100ff005
[32854.621957] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32854.621964] ============>HTIOTActIsForcedRTSCTS(), 0
[32854.621968] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32854.627996] ===>ieee80211_associate_procedure_wq(), chan:11
[32854.680893] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32854.694750] =================>ieee80211_authentication_req():auth->algorithm is 0
[32854.699858] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32854.699859] 
[32854.699868] rtl819xU:qos active process with associate response received
[32854.699868] 
[32854.699873] Associated successfully
[32854.699874] Using G rates:108
[32854.699875] Successfully associated, ht enabled
[32854.748389] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32854.762505] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32854.765992] =============>ARFR0+rate_index*4:0x100ff005
[32854.774349] ============>normal associate
[32854.785408] alg name:CCMP
[32854.785424] rtl819xU:EnableHWSecurityConfig8192(): hwsec: 1, pairwise_key: 4, SECR_value: c
[32854.785587] rtl819xU:setKey(): dev: ffff8800dacb0000, EntryNo: 4, KeyIndex: 0, KeyType: 4, MacAddr: 00:24:d4:60:8d:3c
[32854.791977] alg name:TKIP
[32854.791993] rtl819xU:setKey(): dev: ffff8800dacb0000, EntryNo: 1, KeyIndex: 1, KeyType: 2, MacAddr: ff:ff:ff:ff:ff:ff
[32854.840316] ieee80211: TsStartAddBaProcess()==>BA timer is already added
[32857.521832] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32857.521840] ============>HTIOTActIsForcedRTSCTS(), 0
[32857.521843] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32857.523659] ===>ieee80211_associate_procedure_wq(), chan:11
[32857.573426] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32857.587832] =================>ieee80211_authentication_req():auth->algorithm is 0
[32857.595740] Association response status code 0x1
[32857.595756] ===>ieee80211_associate_procedure_wq(), chan:11
[32857.644521] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32857.658567] =================>ieee80211_authentication_req():auth->algorithm is 0
[32857.664195] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32857.664197] 
[32857.664216] rtl819xU:qos active process with associate response received
[32857.664218] 
[32857.664226] Associated successfully
[32857.664228] Using G rates:108
[32857.664231] Successfully associated, ht enabled
[32857.713328] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32857.727328] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32857.730817] =============>ARFR0+rate_index*4:0x100ff005
[32857.738421] ============>normal associate
[32857.739090] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32857.739098] ============>HTIOTActIsForcedRTSCTS(), 0
[32857.739101] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32857.740172] ===>ieee80211_associate_procedure_wq(), chan:11
[32857.789285] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32857.803266] =================>ieee80211_authentication_req():auth->algorithm is 0
[32857.809517] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32857.809520] 
[32857.809535] rtl819xU:qos active process with associate response received
[32857.809537] 
[32857.809545] Associated successfully
[32857.809547] Using G rates:108
[32857.809549] Successfully associated, ht enabled
[32857.858924] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32857.872652] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32857.875764] =============>ARFR0+rate_index*4:0x100ff005
[32857.882873] ============>normal associate
[32857.883050] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32857.883057] ============>HTIOTActIsForcedRTSCTS(), 0
[32857.883060] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32857.884404] ===>ieee80211_associate_procedure_wq(), chan:11
[32857.934143] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32857.948895] =================>ieee80211_authentication_req():auth->algorithm is 0
[32857.954640] Association response status code 0x1
[32857.954663] ===>ieee80211_associate_procedure_wq(), chan:11
[32858.003844] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32858.017973] =================>ieee80211_authentication_req():auth->algorithm is 0
[32858.023226] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32858.023229] 
[32858.023242] rtl819xU:qos active process with associate response received
[32858.023244] 
[32858.023251] Associated successfully
[32858.023254] Using G rates:108
[32858.023256] Successfully associated, ht enabled
[32858.072865] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32858.086825] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32858.090574] =============>ARFR0+rate_index*4:0x100ff005
[32858.097769] ============>normal associate
[32858.097966] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32858.097972] ============>HTIOTActIsForcedRTSCTS(), 0
[32858.097975] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32858.099178] ===>ieee80211_associate_procedure_wq(), chan:11
[32858.150686] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32858.165194] =================>ieee80211_authentication_req():auth->algorithm is 0
[32858.170294] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32858.170297] 
[32858.170309] rtl819xU:qos active process with associate response received
[32858.170312] 
[32858.170320] Associated successfully
[32858.170323] Using G rates:108
[32858.170325] Successfully associated, ht enabled
[32858.219557] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32858.233617] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32858.236854] =============>ARFR0+rate_index*4:0x100ff005
[32858.244339] ============>normal associate
[32858.244545] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32858.244552] ============>HTIOTActIsForcedRTSCTS(), 0
[32858.244555] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32858.245897] ===>ieee80211_associate_procedure_wq(), chan:11
[32858.295173] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32858.309453] =================>ieee80211_authentication_req():auth->algorithm is 0
[32858.314456] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32858.314459] 
[32858.314474] rtl819xU:qos active process with associate response received
[32858.314477] 
[32858.314483] Associated successfully
[32858.314486] Using G rates:108
[32858.314488] Successfully associated, ht enabled
[32858.363878] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32858.377599] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32858.380555] =============>ARFR0+rate_index*4:0x100ff005
[32858.387921] ============>normal associate
[32858.388091] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32858.388098] ============>HTIOTActIsForcedRTSCTS(), 0
[32858.388101] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32858.389317] ===>ieee80211_associate_procedure_wq(), chan:11
[32858.438596] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32858.452816] =================>ieee80211_authentication_req():auth->algorithm is 0
[32858.458441] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32858.458444] 
[32858.458461] rtl819xU:qos active process with associate response received
[32858.458463] 
[32858.458471] Associated successfully
[32858.458474] Using G rates:108
[32858.458476] Successfully associated, ht enabled
[32858.507575] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32858.521417] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32858.525129] =============>ARFR0+rate_index*4:0x100ff005
[32858.536479] ============>normal associate
[32858.553696] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32858.553703] ============>HTIOTActIsForcedRTSCTS(), 0
[32858.553707] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32858.554821] ===>ieee80211_associate_procedure_wq(), chan:11
[32858.604624] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32858.619063] =================>ieee80211_authentication_req():auth->algorithm is 0
[32858.624304] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32858.624305] 
[32858.624311] rtl819xU:qos active process with associate response received
[32858.624312] 
[32858.624315] Associated successfully
[32858.624316] Using G rates:108
[32858.624317] Successfully associated, ht enabled
[32858.673704] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32858.687798] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32858.690703] =============>ARFR0+rate_index*4:0x100ff005
[32858.697523] ============>normal associate
[32858.697713] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32858.697720] ============>HTIOTActIsForcedRTSCTS(), 0
[32858.697724] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32858.698771] ===>ieee80211_associate_procedure_wq(), chan:11
[32858.748108] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32858.762415] =================>ieee80211_authentication_req():auth->algorithm is 0
[32858.767770] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32858.767772] 
[32858.767784] rtl819xU:qos active process with associate response received
[32858.767786] 
[32858.767793] Associated successfully
[32858.767796] Using G rates:108
[32858.767798] Successfully associated, ht enabled
[32858.816816] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32858.830573] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32858.833490] =============>ARFR0+rate_index*4:0x100ff005
[32858.840846] ============>normal associate
[32858.841055] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32858.841062] ============>HTIOTActIsForcedRTSCTS(), 0
[32858.841065] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32858.842249] ===>ieee80211_associate_procedure_wq(), chan:11
[32858.891893] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32858.906472] =================>ieee80211_authentication_req():auth->algorithm is 0
[32858.912240] Association response status code 0x1
[32858.912256] ===>ieee80211_associate_procedure_wq(), chan:11
[32858.961133] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32858.975821] =================>ieee80211_authentication_req():auth->algorithm is 0
[32858.981728] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32858.981730] 
[32858.981747] rtl819xU:qos active process with associate response received
[32858.981749] 
[32858.981757] Associated successfully
[32858.981759] Using G rates:108
[32858.981762] Successfully associated, ht enabled
[32859.030987] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32859.044673] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32859.047414] =============>ARFR0+rate_index*4:0x100ff005
[32859.054277] ============>normal associate
[32859.054446] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32859.054453] ============>HTIOTActIsForcedRTSCTS(), 0
[32859.054456] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32859.055583] ===>ieee80211_associate_procedure_wq(), chan:11
[32859.105047] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32859.119922] =================>ieee80211_authentication_req():auth->algorithm is 0
[32859.127290] Association response status code 0x1
[32859.127305] ===>ieee80211_associate_procedure_wq(), chan:11
[32859.176305] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32859.191525] =================>ieee80211_authentication_req():auth->algorithm is 0
[32859.196773] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32859.196776] 
[32859.196788] rtl819xU:qos active process with associate response received
[32859.196790] 
[32859.196798] Associated successfully
[32859.196801] Using G rates:108
[32859.196803] Successfully associated, ht enabled
[32859.249783] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32859.265841] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32859.269452] =============>ARFR0+rate_index*4:0x100ff005
[32859.279717] ============>normal associate
[32859.279926] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32859.279933] ============>HTIOTActIsForcedRTSCTS(), 0
[32859.279936] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32859.281351] ===>ieee80211_associate_procedure_wq(), chan:11
[32859.333134] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32859.347728] =================>ieee80211_authentication_req():auth->algorithm is 0
[32859.352825] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32859.352828] 
[32859.352842] rtl819xU:qos active process with associate response received
[32859.352845] 
[32859.352853] Associated successfully
[32859.352855] Using G rates:108
[32859.352857] Successfully associated, ht enabled
[32859.403083] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32859.417275] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32859.420172] =============>ARFR0+rate_index*4:0x100ff005
[32859.427007] ============>normal associate
[32859.427110] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32859.427116] ============>HTIOTActIsForcedRTSCTS(), 0
[32859.427117] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32859.428253] ===>ieee80211_associate_procedure_wq(), chan:11
[32859.481421] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32859.495882] =================>ieee80211_authentication_req():auth->algorithm is 0
[32859.500926] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32859.500929] 
[32859.500944] rtl819xU:qos active process with associate response received
[32859.500946] 
[32859.500955] Associated successfully
[32859.500958] Using G rates:108
[32859.500964] Successfully associated, ht enabled
[32859.550423] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32859.564588] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32859.567206] =============>ARFR0+rate_index*4:0x100ff005
[32859.575096] ============>normal associate
[32859.581821] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32859.581829] ============>HTIOTActIsForcedRTSCTS(), 0
[32859.581832] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32859.582927] ===>ieee80211_associate_procedure_wq(), chan:11
[32859.635063] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32859.654529] =================>ieee80211_authentication_req():auth->algorithm is 0
[32859.659647] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32859.659649] 
[32859.659657] rtl819xU:qos active process with associate response received
[32859.659658] 
[32859.659663] Associated successfully
[32859.659665] Using G rates:108
[32859.659666] Successfully associated, ht enabled
[32859.708325] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32859.722265] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32859.725961] =============>ARFR0+rate_index*4:0x100ff005
[32859.732769] ============>normal associate
[32859.733008] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32859.733015] ============>HTIOTActIsForcedRTSCTS(), 0
[32859.733019] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32859.734053] ===>ieee80211_associate_procedure_wq(), chan:11
[32859.784133] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32859.798753] =================>ieee80211_authentication_req():auth->algorithm is 0
[32859.805886] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32859.805889] 
[32859.805903] rtl819xU:qos active process with associate response received
[32859.805905] 
[32859.805914] Associated successfully
[32859.805917] Using G rates:108
[32859.805919] Successfully associated, ht enabled
[32859.855766] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32859.869740] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32859.873076] =============>ARFR0+rate_index*4:0x100ff005
[32859.880111] ============>normal associate
[32859.880314] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32859.880320] ============>HTIOTActIsForcedRTSCTS(), 0
[32859.880324] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32859.881739] ===>ieee80211_associate_procedure_wq(), chan:11
[32859.931387] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32859.947541] =================>ieee80211_authentication_req():auth->algorithm is 0
[32859.953329] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32859.953331] 
[32859.953346] rtl819xU:qos active process with associate response received
[32859.953348] 
[32859.953356] Associated successfully
[32859.953359] Using G rates:108
[32859.953361] Successfully associated, ht enabled
[32860.002430] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32860.016404] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32860.019173] =============>ARFR0+rate_index*4:0x100ff005
[32860.026499] ============>normal associate
[32860.026688] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32860.026695] ============>HTIOTActIsForcedRTSCTS(), 0
[32860.026698] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32860.027778] ===>ieee80211_associate_procedure_wq(), chan:11
[32860.077299] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32860.091617] =================>ieee80211_authentication_req():auth->algorithm is 0
[32860.097369] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32860.097371] 
[32860.097390] rtl819xU:qos active process with associate response received
[32860.097392] 
[32860.097684] Associated successfully
[32860.097688] Using G rates:108
[32860.097690] Successfully associated, ht enabled
[32860.147630] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32860.162099] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32860.165119] =============>ARFR0+rate_index*4:0x100ff005
[32860.172480] ============>normal associate
[32860.172692] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32860.172699] ============>HTIOTActIsForcedRTSCTS(), 0
[32860.172702] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32860.173975] ===>ieee80211_associate_procedure_wq(), chan:11
[32860.223404] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32860.238129] =================>ieee80211_authentication_req():auth->algorithm is 0
[32860.243560] Association response status code 0x1
[32860.243576] ===>ieee80211_associate_procedure_wq(), chan:11
[32860.293237] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32860.307451] =================>ieee80211_authentication_req():auth->algorithm is 0
[32860.338864] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32860.338866] 
[32860.338879] rtl819xU:qos active process with associate response received
[32860.338882] 
[32860.338889] Associated successfully
[32860.338892] Using G rates:108
[32860.338894] Successfully associated, ht enabled
[32860.388034] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32860.402129] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32860.405363] =============>ARFR0+rate_index*4:0x100ff005
[32860.412823] ============>normal associate
[32860.413082] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32860.413089] ============>HTIOTActIsForcedRTSCTS(), 0
[32860.413092] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32860.414222] ===>ieee80211_associate_procedure_wq(), chan:11
[32860.463839] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32860.478332] =================>ieee80211_authentication_req():auth->algorithm is 0
[32860.484068] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32860.484071] 
[32860.484084] rtl819xU:qos active process with associate response received
[32860.484086] 
[32860.484113] Associated successfully
[32860.484116] Using G rates:108
[32860.484118] Successfully associated, ht enabled
[32860.533732] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32860.548042] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32860.551156] =============>ARFR0+rate_index*4:0x100ff005
[32860.558298] ============>normal associate
[32860.578797] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32860.578804] ============>HTIOTActIsForcedRTSCTS(), 0
[32860.578807] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32860.579971] ===>ieee80211_associate_procedure_wq(), chan:11
[32860.629930] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32860.644150] =================>ieee80211_authentication_req():auth->algorithm is 0
[32860.650497] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32860.650500] 
[32860.650515] rtl819xU:qos active process with associate response received
[32860.650517] 
[32860.650525] Associated successfully
[32860.650528] Using G rates:108
[32860.650530] Successfully associated, ht enabled
[32860.699882] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32860.713893] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32860.717062] =============>ARFR0+rate_index*4:0x100ff005
[32860.724428] ============>normal associate
[32860.724640] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32860.724647] ============>HTIOTActIsForcedRTSCTS(), 0
[32860.724650] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32860.725699] ===>ieee80211_associate_procedure_wq(), chan:11
[32860.775380] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32860.793034] =================>ieee80211_authentication_req():auth->algorithm is 0
[32860.799647] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32860.799648] 
[32860.799669] rtl819xU:qos active process with associate response received
[32860.799670] 
[32860.799674] Associated successfully
[32860.799675] Using G rates:108
[32860.799676] Successfully associated, ht enabled
[32860.851938] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32860.865632] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32860.868624] =============>ARFR0+rate_index*4:0x100ff005
[32860.876132] ============>normal associate
[32860.893422] alg name:CCMP
[32860.893436] rtl819xU:EnableHWSecurityConfig8192(): hwsec: 1, pairwise_key: 4, SECR_value: c
[32860.893629] rtl819xU:setKey(): dev: ffff8800dacb0000, EntryNo: 4, KeyIndex: 0, KeyType: 4, MacAddr: 00:24:d4:60:8d:3c
[32862.660637] =============>ARFR0+rate_index*4:0x100ff005
[32862.981395] alg name:CCMP
[32862.981405] rtl819xU:EnableHWSecurityConfig8192(): hwsec: 1, pairwise_key: 4, SECR_value: c
[32862.981742] rtl819xU:setKey(): dev: ffff8800dacb0000, EntryNo: 4, KeyIndex: 0, KeyType: 4, MacAddr: 00:24:d4:60:8d:3c
[32863.979360] ==========>received disassoc/deauth(c0) frame, reason code:2
[32863.979375] ===========>RemovePeerTS,00:24:d4:60:8d:3c
[32863.979378] ====>remove Tx_TS_admin_list
[32863.980016] ieee80211:  in GetTs(), TID(10) is not valid
[32863.980019] ieee80211: can't get TS for RXTS in ieee80211_rx_DELBA()
[32863.980451] ===>ieee80211_associate_procedure_wq(), chan:11
[32864.029692] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32864.045256] =================>ieee80211_authentication_req():auth->algorithm is 0
[32864.070132] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32864.070135] 
[32864.070155] rtl819xU:qos active process with associate response received
[32864.070157] 
[32864.070165] Associated successfully
[32864.070168] Using G rates:108
[32864.070170] Successfully associated, ht enabled
[32864.120162] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32864.134195] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32864.137182] =============>ARFR0+rate_index*4:0x100ff005
[32864.145073] ============>normal associate
[32865.904005] =============>ARFR0+rate_index*4:0x100ff005
[32866.173794] alg name:CCMP
[32866.173808] rtl819xU:EnableHWSecurityConfig8192(): hwsec: 1, pairwise_key: 4, SECR_value: c
[32866.173976] rtl819xU:setKey(): dev: ffff8800dacb0000, EntryNo: 4, KeyIndex: 0, KeyType: 4, MacAddr: 00:24:d4:60:8d:3c
[32866.178783] alg name:TKIP
[32866.178797] rtl819xU:setKey(): dev: ffff8800dacb0000, EntryNo: 1, KeyIndex: 1, KeyType: 2, MacAddr: ff:ff:ff:ff:ff:ff
[32866.235539] ieee80211: TsStartAddBaProcess()==>BA timer is already added
[32869.122695] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32869.122703] ============>HTIOTActIsForcedRTSCTS(), 0
[32869.122706] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32869.122720] Linking with draco_freebox,channel:11, qos:1, myHT:1, networkHT:1, mode:10
[32869.122725] ============>HTIOTActIsForcedRTSCTS(), 0
[32869.122728] !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!IOTAction = 00000400
[32869.124945] ===>ieee80211_associate_procedure_wq(), chan:11
[32869.174716] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32869.189664] =================>ieee80211_authentication_req():auth->algorithm is 0
[32869.199472] rtl819xU:rtl8192_qos_association_resp: network->flags = 10,1
[32869.199474] 
[32869.199487] rtl819xU:qos active process with associate response received
[32869.199489] 
[32869.199497] Associated successfully
[32869.199500] Using G rates:108
[32869.199502] Successfully associated, ht enabled
[32869.252561] rtl819xU:SetBWModeCallback8192SUsbWorkItem(): Switch to 20MHz bandwidth
[32869.267655] !!!!!!!!!!!!!!!!!!!!!!!!!!!IOTRaFunc = 00000000
[32869.271269] =============>ARFR0+rate_index*4:0x100ff005
[32869.280218] ============>normal associate
[32869.287560] alg name:CCMP
[32869.287574] rtl819xU:EnableHWSecurityConfig8192(): hwsec: 1, pairwise_key: 4, SECR_value: c
[32869.287762] rtl819xU:setKey(): dev: ffff8800dacb0000, EntryNo: 4, KeyIndex: 0, KeyType: 4, MacAddr: 00:24:d4:60:8d:3c
[32869.300900] alg name:TKIP
[32869.300921] rtl819xU:setKey(): dev: ffff8800dacb0000, EntryNo: 1, KeyIndex: 1, KeyType: 2, MacAddr: ff:ff:ff:ff:ff:ff
[32898.975960] ====================>rx ADDBAREQ from :00:24:d4:60:8d:3c
[32898.975967] =====>to send ADDBARSP
[32942.740023] =============>ARFR0+rate_index*4:0x100ff005
[32982.591564] =============>ARFR0+rate_index*4:0x100ff005
[33042.473139] =============>ARFR0+rate_index*4:0x100ff005
[33122.351314] =============>ARFR0+rate_index*4:0x100ff005
[33222.103954] =============>ARFR0+rate_index*4:0x100ff005
[33341.834011] =============>ARFR0+rate_index*4:0x100ff005
[33461.583277] =============>ARFR0+rate_index*4:0x100ff005
[33581.326785] =============>ARFR0+rate_index*4:0x100ff005
[33701.110965] =============>ARFR0+rate_index*4:0x100ff005
[33742.616116] lo: Disabled Privacy Extensions
[33820.836963] =============>ARFR0+rate_index*4:0x100ff005
[33852.648727] lo: Disabled Privacy Extensions