Oct 19 08:01:49 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 08:01:50 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 08:01:50 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 374 seconds. Oct 19 08:08:04 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 08:08:05 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 08:08:05 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 441 seconds. Oct 19 08:15:26 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 08:15:27 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 08:15:27 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 426 seconds. Oct 19 08:22:33 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 08:22:34 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 08:22:34 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 401 seconds. Oct 19 08:29:15 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 08:29:16 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 08:29:16 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 401 seconds. Oct 19 08:35:57 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 08:35:58 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 08:35:58 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 340 seconds. Oct 19 08:41:38 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 08:41:39 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 08:41:39 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 352 seconds. Oct 19 08:47:31 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 08:47:32 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 08:47:32 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 365 seconds. Oct 19 08:53:37 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 08:53:38 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 08:53:38 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 349 seconds. Oct 19 08:54:38 burton-10 kernel: Kernel logging (proc) stopped. Oct 19 08:56:07 burton-10 kernel: imklog 4.2.0, log source = /proc/kmsg started. Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Initializing cgroup subsys cpuset Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Initializing cgroup subsys cpu Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Linux version 2.6.32-25-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #44-Ubuntu SMP Fri Sep 17 20:05:27 UTC 2010 (Ubuntu 2.6.32-25.44-generic 2.6.32.21+drm33.7) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=706afc9c-b5bc-4435-86ad-54b7809d2b21 ro nomodeset quiet splash Oct 19 08:56:07 burton-10 kernel: [ 0.000000] KERNEL supported cpus: Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Intel GenuineIntel Oct 19 08:56:07 burton-10 kernel: [ 0.000000] AMD AuthenticAMD Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Centaur CentaurHauls Oct 19 08:56:07 burton-10 kernel: [ 0.000000] BIOS-provided physical RAM map: Oct 19 08:56:07 burton-10 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] DMI 2.3 present. Oct 19 08:56:07 burton-10 kernel: [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. Oct 19 08:56:07 burton-10 kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] last_pfn = 0x3ffd0 max_arch_pfn = 0x400000000 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] MTRR default type: uncachable Oct 19 08:56:07 burton-10 kernel: [ 0.000000] MTRR fixed ranges enabled: Oct 19 08:56:07 burton-10 kernel: [ 0.000000] 00000-9FFFF write-back Oct 19 08:56:07 burton-10 kernel: [ 0.000000] A0000-EFFFF uncachable Oct 19 08:56:07 burton-10 kernel: [ 0.000000] F0000-FFFFF write-protect Oct 19 08:56:07 burton-10 kernel: [ 0.000000] MTRR variable ranges enabled: Oct 19 08:56:07 burton-10 kernel: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back Oct 19 08:56:07 burton-10 kernel: [ 0.000000] 1 disabled Oct 19 08:56:07 burton-10 kernel: [ 0.000000] 2 disabled Oct 19 08:56:07 burton-10 kernel: [ 0.000000] 3 disabled Oct 19 08:56:07 burton-10 kernel: [ 0.000000] 4 disabled Oct 19 08:56:07 burton-10 kernel: [ 0.000000] 5 disabled Oct 19 08:56:07 burton-10 kernel: [ 0.000000] 6 disabled Oct 19 08:56:07 burton-10 kernel: [ 0.000000] 7 disabled Oct 19 08:56:07 burton-10 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Scanning 0 areas for low memory corruption Oct 19 08:56:07 burton-10 kernel: [ 0.000000] modified physical RAM map: Oct 19 08:56:07 burton-10 kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] modified: 0000000000100000 - 000000003ffd0000 (usable) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] modified: 000000003ffd0000 - 000000003ffde000 (ACPI data) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] modified: 000000003ffde000 - 0000000040000000 (ACPI NVS) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] modified: 00000000ff780000 - 0000000100000000 (reserved) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] initial memory mapped : 0 - 20000000 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] init_memory_mapping: 0000000000000000-000000003ffd0000 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] NX (Execute Disable) protection: active Oct 19 08:56:07 burton-10 kernel: [ 0.000000] 0000000000 - 003fe00000 page 2M Oct 19 08:56:07 burton-10 kernel: [ 0.000000] 003fe00000 - 003ffd0000 page 4k Oct 19 08:56:07 burton-10 kernel: [ 0.000000] kernel direct mapping tables up to 3ffd0000 @ 10000-13000 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] RAMDISK: 2f827000 - 3001bb0f Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: RSDP 00000000000f92a0 00014 (v00 ACPIAM) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: RSDT 000000003ffd0000 00030 (v01 A M I OEMRSDT 01000627 MSFT 00000097) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: FACP 000000003ffd0200 00084 (v02 A M I OEMFACP 01000627 MSFT 00000097) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: DSDT 000000003ffd03f0 03D20 (v01 1XXXX 1XXXX005 00000005 INTL 02002026) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: FACS 000000003ffde000 00040 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: APIC 000000003ffd0390 0005C (v01 A M I OEMAPIC 01000627 MSFT 00000097) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: OEMB 000000003ffde040 00046 (v01 A M I AMI_OEM 01000627 MSFT 00000097) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] No NUMA configuration found Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Faking a node at 0000000000000000-000000003ffd0000 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-000000003ffd0000 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff] Oct 19 08:56:07 burton-10 kernel: [ 0.000000] bootmap [0000000000016000 - 000000000001dfff] pages 8 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 003ffd0000] Oct 19 08:56:07 burton-10 kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Oct 19 08:56:07 burton-10 kernel: [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] Oct 19 08:56:07 burton-10 kernel: [ 0.000000] #2 [0001000000 - 0001a2ca64] TEXT DATA BSS ==> [0001000000 - 0001a2ca64] Oct 19 08:56:07 burton-10 kernel: [ 0.000000] #3 [002f827000 - 003001bb0f] RAMDISK ==> [002f827000 - 003001bb0f] Oct 19 08:56:07 burton-10 kernel: [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] Oct 19 08:56:07 burton-10 kernel: [ 0.000000] #5 [0001a2d000 - 0001a2d154] BRK ==> [0001a2d000 - 0001a2d154] Oct 19 08:56:07 burton-10 kernel: [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] Oct 19 08:56:07 burton-10 kernel: [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880002000000-ffff880002dfffff] on node 0 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Zone PFN ranges: Oct 19 08:56:07 burton-10 kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Normal 0x00100000 -> 0x00100000 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Movable zone start PFN for each node Oct 19 08:56:07 burton-10 kernel: [ 0.000000] early_node_map[2] active PFN ranges Oct 19 08:56:07 burton-10 kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Oct 19 08:56:07 burton-10 kernel: [ 0.000000] 0: 0x00000100 -> 0x0003ffd0 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] On node 0 totalpages: 261983 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] DMA zone: 56 pages used for memmap Oct 19 08:56:07 burton-10 kernel: [ 0.000000] DMA zone: 100 pages reserved Oct 19 08:56:07 burton-10 kernel: [ 0.000000] DMA zone: 3827 pages, LIFO batch:0 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] DMA32 zone: 3528 pages used for memmap Oct 19 08:56:07 burton-10 kernel: [ 0.000000] DMA32 zone: 254472 pages, LIFO batch:31 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Detected use of extended apic ids on hypertransport bus Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: IRQ0 used by override. Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: IRQ2 used by override. Oct 19 08:56:07 burton-10 kernel: [ 0.000000] ACPI: IRQ9 used by override. Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Oct 19 08:56:07 burton-10 kernel: [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs Oct 19 08:56:07 burton-10 kernel: [ 0.000000] nr_irqs_gsi: 24 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware Oct 19 08:56:07 burton-10 kernel: [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u1048576 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] pcpu-alloc: [0] 0 1 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258299 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Policy zone: DMA32 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-25-generic root=UUID=706afc9c-b5bc-4435-86ad-54b7809d2b21 ro nomodeset quiet splash Oct 19 08:56:07 burton-10 kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Initializing CPU#0 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Checking aperture... Oct 19 08:56:07 burton-10 kernel: [ 0.000000] AGP bridge at 00:00:00 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Aperture from AGP @ f0000000 old size 32 MB Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Aperture from AGP @ f0000000 size 128 MB (APSIZE f20) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Node 0: aperture @ d0000000 size 128 MB Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Memory: 1014648k/1048384k available (5419k kernel code, 452k absent, 33284k reserved, 2974k data, 872k init) Oct 19 08:56:07 burton-10 kernel: [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Hierarchical RCU implementation. Oct 19 08:56:07 burton-10 kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:424 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] spurious 8259A interrupt: IRQ7. Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Console: colour VGA+ 80x25 Oct 19 08:56:07 burton-10 kernel: [ 0.000000] console [tty0] enabled Oct 19 08:56:07 burton-10 kernel: [ 0.000000] allocated 10485760 bytes of page_cgroup Oct 19 08:56:07 burton-10 kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Fast TSC calibration using PIT Oct 19 08:56:07 burton-10 kernel: [ 0.000000] Detected 2519.973 MHz processor. Oct 19 08:56:07 burton-10 kernel: [ 0.020007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5039.94 BogoMIPS (lpj=25199730) Oct 19 08:56:07 burton-10 kernel: [ 0.020039] Security Framework initialized Oct 19 08:56:07 burton-10 kernel: [ 0.020068] AppArmor: AppArmor initialized Oct 19 08:56:07 burton-10 kernel: [ 0.020182] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Oct 19 08:56:07 burton-10 kernel: [ 0.021277] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Oct 19 08:56:07 burton-10 kernel: [ 0.021833] Mount-cache hash table entries: 256 Oct 19 08:56:07 burton-10 kernel: [ 0.022021] Initializing cgroup subsys ns Oct 19 08:56:07 burton-10 kernel: [ 0.022025] Initializing cgroup subsys cpuacct Oct 19 08:56:07 burton-10 kernel: [ 0.022029] Initializing cgroup subsys memory Oct 19 08:56:07 burton-10 kernel: [ 0.022041] Initializing cgroup subsys devices Oct 19 08:56:07 burton-10 kernel: [ 0.022044] Initializing cgroup subsys freezer Oct 19 08:56:07 burton-10 kernel: [ 0.022046] Initializing cgroup subsys net_cls Oct 19 08:56:07 burton-10 kernel: [ 0.022070] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Oct 19 08:56:07 burton-10 kernel: [ 0.022072] CPU: L2 Cache: 512K (64 bytes/line) Oct 19 08:56:07 burton-10 kernel: [ 0.022075] CPU 0/0x0 -> Node 0 Oct 19 08:56:07 burton-10 kernel: [ 0.022076] tseg: 0000000000 Oct 19 08:56:07 burton-10 kernel: [ 0.022096] mce: CPU supports 5 MCE banks Oct 19 08:56:07 burton-10 kernel: [ 0.022111] Performance Events: AMD PMU driver. Oct 19 08:56:07 burton-10 kernel: [ 0.022117] ... version: 0 Oct 19 08:56:07 burton-10 kernel: [ 0.022118] ... bit width: 48 Oct 19 08:56:07 burton-10 kernel: [ 0.022120] ... generic registers: 4 Oct 19 08:56:07 burton-10 kernel: [ 0.022121] ... value mask: 0000ffffffffffff Oct 19 08:56:07 burton-10 kernel: [ 0.022123] ... max period: 00007fffffffffff Oct 19 08:56:07 burton-10 kernel: [ 0.022125] ... fixed-purpose events: 0 Oct 19 08:56:07 burton-10 kernel: [ 0.022126] ... event mask: 000000000000000f Oct 19 08:56:07 burton-10 kernel: [ 0.022141] SMP alternatives: switching to UP code Oct 19 08:56:07 burton-10 kernel: [ 0.036694] ACPI: Core revision 20090903 Oct 19 08:56:07 burton-10 kernel: [ 0.050007] ftrace: converting mcount calls to 0f 1f 44 00 00 Oct 19 08:56:07 burton-10 kernel: [ 0.050013] ftrace: allocating 22538 entries in 89 pages Oct 19 08:56:07 burton-10 kernel: [ 0.060128] Setting APIC routing to flat Oct 19 08:56:07 burton-10 kernel: [ 0.060939] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 Oct 19 08:56:07 burton-10 kernel: [ 0.163595] CPU0: AMD Athlon(tm) 64 Processor 3800+ stepping 02 Oct 19 08:56:07 burton-10 kernel: [ 0.170000] APIC calibration not consistent with PM-Timer: 160ms instead of 100ms Oct 19 08:56:07 burton-10 kernel: [ 0.170000] APIC delta adjusted to PM-Timer: 1312498 (2100033) Oct 19 08:56:07 burton-10 kernel: [ 0.170000] Brought up 1 CPUs Oct 19 08:56:07 burton-10 kernel: [ 0.170000] Total of 1 processors activated (5039.94 BogoMIPS). Oct 19 08:56:07 burton-10 kernel: [ 0.170000] CPU0 attaching NULL sched-domain. Oct 19 08:56:07 burton-10 kernel: [ 0.170000] devtmpfs: initialized Oct 19 08:56:07 burton-10 kernel: [ 0.170000] regulator: core version 0.5 Oct 19 08:56:07 burton-10 kernel: [ 0.170000] Time: 14:55:57 Date: 10/19/10 Oct 19 08:56:07 burton-10 kernel: [ 0.170000] NET: Registered protocol family 16 Oct 19 08:56:07 burton-10 kernel: [ 0.170000] node 0 link 0: io port [1000, ffffff] Oct 19 08:56:07 burton-10 kernel: [ 0.170000] TOM: 0000000040000000 aka 1024M Oct 19 08:56:07 burton-10 kernel: [ 0.170000] node 0 link 0: mmio [a0000, bffff] Oct 19 08:56:07 burton-10 kernel: [ 0.170000] node 0 link 0: mmio [40000000, ffffffff] Oct 19 08:56:07 burton-10 kernel: [ 0.170000] bus: [00,ff] on node 0 link 0 Oct 19 08:56:07 burton-10 kernel: [ 0.170000] bus: 00 index 0 io port: [0, ffff] Oct 19 08:56:07 burton-10 kernel: [ 0.170000] bus: 00 index 1 mmio: [a0000, bffff] Oct 19 08:56:07 burton-10 kernel: [ 0.170000] bus: 00 index 2 mmio: [40000000, fcffffffff] Oct 19 08:56:07 burton-10 kernel: [ 0.170000] ACPI: bus type pci registered Oct 19 08:56:07 burton-10 kernel: [ 0.170000] PCI: Using configuration type 1 for base access Oct 19 08:56:07 burton-10 kernel: [ 0.170000] bio: create slab at 0 Oct 19 08:56:07 burton-10 kernel: [ 0.170000] ACPI: EC: Look up EC in DSDT Oct 19 08:56:07 burton-10 kernel: [ 0.170000] ACPI: Executed 1 blocks of module-level executable AML code Oct 19 08:56:07 burton-10 kernel: [ 0.170000] ACPI: Interpreter enabled Oct 19 08:56:07 burton-10 kernel: [ 0.170000] ACPI: (supports S0 S1 S3 S4 S5) Oct 19 08:56:07 burton-10 kernel: [ 0.170000] ACPI: Using IOAPIC for interrupt routing Oct 19 08:56:07 burton-10 kernel: [ 0.173508] ACPI: No dock devices found. Oct 19 08:56:07 burton-10 kernel: [ 0.173624] ACPI: PCI Root Bridge [PCI0] (0000:00) Oct 19 08:56:07 burton-10 kernel: [ 0.173674] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff] Oct 19 08:56:07 burton-10 kernel: [ 0.173908] pci 0000:00:01.0: supports D1 Oct 19 08:56:07 burton-10 kernel: [ 0.173936] pci 0000:00:05.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] Oct 19 08:56:07 burton-10 kernel: [ 0.173941] pci 0000:00:05.0: reg 14 32bit mmio pref: [0xe0000000-0xefffffff] Oct 19 08:56:07 burton-10 kernel: [ 0.173958] pci 0000:00:05.0: reg 30 32bit mmio pref: [0xfafe0000-0xfaffffff] Oct 19 08:56:07 burton-10 kernel: [ 0.174001] pci 0000:00:0b.0: reg 10 io port: [0xe800-0xe8ff] Oct 19 08:56:07 burton-10 kernel: [ 0.174006] pci 0000:00:0b.0: reg 14 32bit mmio: [0xfafdfc00-0xfafdfcff] Oct 19 08:56:07 burton-10 kernel: [ 0.174025] pci 0000:00:0b.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] Oct 19 08:56:07 burton-10 kernel: [ 0.174038] pci 0000:00:0b.0: supports D1 D2 Oct 19 08:56:07 burton-10 kernel: [ 0.174040] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold Oct 19 08:56:07 burton-10 kernel: [ 0.174044] pci 0000:00:0b.0: PME# disabled Oct 19 08:56:07 burton-10 kernel: [ 0.174074] pci 0000:00:0f.0: reg 10 io port: [0xe400-0xe407] Oct 19 08:56:07 burton-10 kernel: [ 0.174080] pci 0000:00:0f.0: reg 14 io port: [0xe000-0xe003] Oct 19 08:56:07 burton-10 kernel: [ 0.174085] pci 0000:00:0f.0: reg 18 io port: [0xd800-0xd807] Oct 19 08:56:07 burton-10 kernel: [ 0.174090] pci 0000:00:0f.0: reg 1c io port: [0xd400-0xd403] Oct 19 08:56:07 burton-10 kernel: [ 0.174095] pci 0000:00:0f.0: reg 20 io port: [0xd000-0xd00f] Oct 19 08:56:07 burton-10 kernel: [ 0.174100] pci 0000:00:0f.0: reg 24 io port: [0xc800-0xc8ff] Oct 19 08:56:07 burton-10 kernel: [ 0.174160] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f] Oct 19 08:56:07 burton-10 kernel: [ 0.174226] pci 0000:00:10.0: reg 20 io port: [0xc400-0xc41f] Oct 19 08:56:07 burton-10 kernel: [ 0.174244] pci 0000:00:10.0: supports D1 D2 Oct 19 08:56:07 burton-10 kernel: [ 0.174246] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold Oct 19 08:56:07 burton-10 kernel: [ 0.174249] pci 0000:00:10.0: PME# disabled Oct 19 08:56:07 burton-10 kernel: [ 0.174286] pci 0000:00:10.1: reg 20 io port: [0xc000-0xc01f] Oct 19 08:56:07 burton-10 kernel: [ 0.174305] pci 0000:00:10.1: supports D1 D2 Oct 19 08:56:07 burton-10 kernel: [ 0.174307] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold Oct 19 08:56:07 burton-10 kernel: [ 0.174310] pci 0000:00:10.1: PME# disabled Oct 19 08:56:07 burton-10 kernel: [ 0.174347] pci 0000:00:10.2: reg 20 io port: [0xb800-0xb81f] Oct 19 08:56:07 burton-10 kernel: [ 0.174366] pci 0000:00:10.2: supports D1 D2 Oct 19 08:56:07 burton-10 kernel: [ 0.174367] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold Oct 19 08:56:07 burton-10 kernel: [ 0.174371] pci 0000:00:10.2: PME# disabled Oct 19 08:56:07 burton-10 kernel: [ 0.174407] pci 0000:00:10.3: reg 20 io port: [0xb400-0xb41f] Oct 19 08:56:07 burton-10 kernel: [ 0.174426] pci 0000:00:10.3: supports D1 D2 Oct 19 08:56:07 burton-10 kernel: [ 0.174428] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold Oct 19 08:56:07 burton-10 kernel: [ 0.174431] pci 0000:00:10.3: PME# disabled Oct 19 08:56:07 burton-10 kernel: [ 0.174456] pci 0000:00:10.4: reg 10 32bit mmio: [0xfafdf800-0xfafdf8ff] Oct 19 08:56:07 burton-10 kernel: [ 0.174487] pci 0000:00:10.4: supports D1 D2 Oct 19 08:56:07 burton-10 kernel: [ 0.174489] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold Oct 19 08:56:07 burton-10 kernel: [ 0.174492] pci 0000:00:10.4: PME# disabled Oct 19 08:56:07 burton-10 kernel: [ 0.174544] HPET not enabled in BIOS. You might try hpet=force boot option Oct 19 08:56:07 burton-10 kernel: [ 0.174589] pci 0000:00:11.5: reg 10 io port: [0xb000-0xb0ff] Oct 19 08:56:07 burton-10 kernel: [ 0.174623] pci 0000:00:11.5: supports D1 D2 Oct 19 08:56:07 burton-10 kernel: [ 0.174729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Oct 19 08:56:07 burton-10 kernel: [ 0.185959] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) Oct 19 08:56:07 burton-10 kernel: [ 0.186044] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) Oct 19 08:56:07 burton-10 kernel: [ 0.186125] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) Oct 19 08:56:07 burton-10 kernel: [ 0.186205] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Oct 19 08:56:07 burton-10 kernel: [ 0.186286] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Oct 19 08:56:07 burton-10 kernel: [ 0.186367] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Oct 19 08:56:07 burton-10 kernel: [ 0.186448] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Oct 19 08:56:07 burton-10 kernel: [ 0.186530] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Oct 19 08:56:07 burton-10 kernel: [ 0.186636] vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none Oct 19 08:56:07 burton-10 kernel: [ 0.186642] vgaarb: loaded Oct 19 08:56:07 burton-10 kernel: [ 0.186757] SCSI subsystem initialized Oct 19 08:56:07 burton-10 kernel: [ 0.186853] libata version 3.00 loaded. Oct 19 08:56:07 burton-10 kernel: [ 0.186919] usbcore: registered new interface driver usbfs Oct 19 08:56:07 burton-10 kernel: [ 0.186929] usbcore: registered new interface driver hub Oct 19 08:56:07 burton-10 kernel: [ 0.186951] usbcore: registered new device driver usb Oct 19 08:56:07 burton-10 kernel: [ 0.187062] ACPI: WMI: Mapper loaded Oct 19 08:56:07 burton-10 kernel: [ 0.187064] PCI: Using ACPI for IRQ routing Oct 19 08:56:07 burton-10 kernel: [ 0.187208] NetLabel: Initializing Oct 19 08:56:07 burton-10 kernel: [ 0.187209] NetLabel: domain hash size = 128 Oct 19 08:56:07 burton-10 kernel: [ 0.187210] NetLabel: protocols = UNLABELED CIPSOv4 Oct 19 08:56:07 burton-10 kernel: [ 0.187225] NetLabel: unlabeled traffic allowed by default Oct 19 08:56:07 burton-10 kernel: [ 0.188950] AppArmor: AppArmor Filesystem Enabled Oct 19 08:56:07 burton-10 kernel: [ 0.188976] pnp: PnP ACPI init Oct 19 08:56:07 burton-10 kernel: [ 0.188999] ACPI: bus type pnp registered Oct 19 08:56:07 burton-10 kernel: [ 0.191553] pnp: PnP ACPI: found 11 devices Oct 19 08:56:07 burton-10 kernel: [ 0.191555] ACPI: ACPI bus type pnp unregistered Oct 19 08:56:07 burton-10 kernel: [ 0.191569] system 00:07: ioport range 0x680-0x6ff has been reserved Oct 19 08:56:07 burton-10 kernel: [ 0.191572] system 00:07: ioport range 0x295-0x296 has been reserved Oct 19 08:56:07 burton-10 kernel: [ 0.191576] system 00:08: ioport range 0x3e0-0x3e7 has been reserved Oct 19 08:56:07 burton-10 kernel: [ 0.191579] system 00:08: ioport range 0x4d0-0x4d1 has been reserved Oct 19 08:56:07 burton-10 kernel: [ 0.191581] system 00:08: ioport range 0x800-0x87f has been reserved Oct 19 08:56:07 burton-10 kernel: [ 0.191583] system 00:08: ioport range 0x400-0x41f has been reserved Oct 19 08:56:07 burton-10 kernel: [ 0.191588] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved Oct 19 08:56:07 burton-10 kernel: [ 0.191591] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved Oct 19 08:56:07 burton-10 kernel: [ 0.191595] system 00:0a: iomem range 0x0-0x9ffff could not be reserved Oct 19 08:56:07 burton-10 kernel: [ 0.191597] system 00:0a: iomem range 0xc0000-0xcffff has been reserved Oct 19 08:56:07 burton-10 kernel: [ 0.191600] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved Oct 19 08:56:07 burton-10 kernel: [ 0.191602] system 00:0a: iomem range 0x100000-0x3fffffff could not be reserved Oct 19 08:56:07 burton-10 kernel: [ 0.191605] system 00:0a: iomem range 0xfff80000-0xffffffff has been reserved Oct 19 08:56:07 burton-10 kernel: [ 0.196257] Switching to clocksource acpi_pm Oct 19 08:56:07 burton-10 kernel: [ 0.196381] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 Oct 19 08:56:07 burton-10 kernel: [ 0.196383] pci 0000:00:01.0: IO window: disabled Oct 19 08:56:07 burton-10 kernel: [ 0.196387] pci 0000:00:01.0: MEM window: disabled Oct 19 08:56:07 burton-10 kernel: [ 0.196390] pci 0000:00:01.0: PREFETCH window: disabled Oct 19 08:56:07 burton-10 kernel: [ 0.196403] pci 0000:00:01.0: setting latency timer to 64 Oct 19 08:56:07 burton-10 kernel: [ 0.196408] pci_bus 0000:00: resource 0 io: [0x00-0xffff] Oct 19 08:56:07 burton-10 kernel: [ 0.196410] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] Oct 19 08:56:07 burton-10 kernel: [ 0.196450] NET: Registered protocol family 2 Oct 19 08:56:07 burton-10 kernel: [ 0.196554] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) Oct 19 08:56:07 burton-10 kernel: [ 0.197101] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) Oct 19 08:56:07 burton-10 kernel: [ 0.199312] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Oct 19 08:56:07 burton-10 kernel: [ 0.199992] TCP: Hash tables configured (established 131072 bind 65536) Oct 19 08:56:07 burton-10 kernel: [ 0.199992] TCP reno registered Oct 19 08:56:07 burton-10 kernel: [ 0.199992] NET: Registered protocol family 1 Oct 19 08:56:07 burton-10 kernel: [ 0.199992] pci 0000:00:01.0: disabling DAC on VIA PCI bridge Oct 19 08:56:07 burton-10 kernel: [ 0.199992] pci 0000:00:05.0: Boot video device Oct 19 08:56:07 burton-10 kernel: [ 0.199992] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0282] Oct 19 08:56:07 burton-10 kernel: [ 0.199992] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 Oct 19 08:56:07 burton-10 kernel: [ 0.199992] Scanning for low memory corruption every 60 seconds Oct 19 08:56:07 burton-10 kernel: [ 0.199992] audit: initializing netlink socket (disabled) Oct 19 08:56:07 burton-10 kernel: [ 0.199992] type=2000 audit(1287500157.193:1): initialized Oct 19 08:56:07 burton-10 kernel: [ 0.207119] Trying to unpack rootfs image as initramfs... Oct 19 08:56:07 burton-10 kernel: [ 0.220354] HugeTLB registered 2 MB page size, pre-allocated 0 pages Oct 19 08:56:07 burton-10 kernel: [ 0.221517] VFS: Disk quotas dquot_6.5.2 Oct 19 08:56:07 burton-10 kernel: [ 0.221569] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Oct 19 08:56:07 burton-10 kernel: [ 0.222113] fuse init (API version 7.13) Oct 19 08:56:07 burton-10 kernel: [ 0.222178] msgmni has been set to 1981 Oct 19 08:56:07 burton-10 kernel: [ 0.230075] alg: No test for stdrng (krng) Oct 19 08:56:07 burton-10 kernel: [ 0.230218] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Oct 19 08:56:07 burton-10 kernel: [ 0.230221] io scheduler noop registered Oct 19 08:56:07 burton-10 kernel: [ 0.230223] io scheduler anticipatory registered Oct 19 08:56:07 burton-10 kernel: [ 0.230225] io scheduler deadline registered Oct 19 08:56:07 burton-10 kernel: [ 0.230260] io scheduler cfq registered (default) Oct 19 08:56:07 burton-10 kernel: [ 0.230435] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Oct 19 08:56:07 burton-10 kernel: [ 0.230458] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Oct 19 08:56:07 burton-10 kernel: [ 0.230560] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 Oct 19 08:56:07 burton-10 kernel: [ 0.230568] ACPI: Sleep Button [SLPB] Oct 19 08:56:07 burton-10 kernel: [ 0.230612] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 Oct 19 08:56:07 burton-10 kernel: [ 0.230614] ACPI: Power Button [PWRB] Oct 19 08:56:07 burton-10 kernel: [ 0.230647] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 Oct 19 08:56:07 burton-10 kernel: [ 0.230649] ACPI: Power Button [PWRF] Oct 19 08:56:07 burton-10 kernel: [ 0.230937] processor LNXCPU:00: registered as cooling_device0 Oct 19 08:56:07 burton-10 kernel: [ 0.234832] Linux agpgart interface v0.103 Oct 19 08:56:07 burton-10 kernel: [ 0.234864] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Oct 19 08:56:07 burton-10 kernel: [ 0.235862] brd: module loaded Oct 19 08:56:07 burton-10 kernel: [ 0.236247] loop: module loaded Oct 19 08:56:07 burton-10 kernel: [ 0.236333] input: Macintosh mouse button emulation as /devices/virtual/input/input3 Oct 19 08:56:07 burton-10 kernel: [ 0.236584] alloc irq_desc for 20 on node 0 Oct 19 08:56:07 burton-10 kernel: [ 0.236586] alloc kstat_irqs on node 0 Oct 19 08:56:07 burton-10 kernel: [ 0.236595] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 Oct 19 08:56:07 burton-10 kernel: [ 0.236658] pata_acpi 0000:00:0f.0: PCI INT B disabled Oct 19 08:56:07 burton-10 kernel: [ 0.240376] pata_acpi 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Oct 19 08:56:07 burton-10 kernel: [ 0.240435] pata_acpi 0000:00:0f.1: PCI INT A disabled Oct 19 08:56:07 burton-10 kernel: [ 0.240820] Fixed MDIO Bus: probed Oct 19 08:56:07 burton-10 kernel: [ 0.240850] PPP generic driver version 2.4.2 Oct 19 08:56:07 burton-10 kernel: [ 0.240915] tun: Universal TUN/TAP device driver, 1.6 Oct 19 08:56:07 burton-10 kernel: [ 0.240916] tun: (C) 1999-2004 Max Krasnyansky Oct 19 08:56:07 burton-10 kernel: [ 0.241001] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Oct 19 08:56:07 burton-10 kernel: [ 0.250236] alloc irq_desc for 21 on node 0 Oct 19 08:56:07 burton-10 kernel: [ 0.250241] alloc kstat_irqs on node 0 Oct 19 08:56:07 burton-10 kernel: [ 0.250251] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 Oct 19 08:56:07 burton-10 kernel: [ 0.250274] ehci_hcd 0000:00:10.4: EHCI Host Controller Oct 19 08:56:07 burton-10 kernel: [ 0.250361] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 Oct 19 08:56:07 burton-10 kernel: [ 0.250436] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfafdf800 Oct 19 08:56:07 burton-10 kernel: [ 0.270153] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 Oct 19 08:56:07 burton-10 kernel: [ 0.270305] usb usb1: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 0.270332] hub 1-0:1.0: USB hub found Oct 19 08:56:07 burton-10 kernel: [ 0.270344] hub 1-0:1.0: 8 ports detected Oct 19 08:56:07 burton-10 kernel: [ 0.270454] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Oct 19 08:56:07 burton-10 kernel: [ 0.270471] uhci_hcd: USB Universal Host Controller Interface driver Oct 19 08:56:07 burton-10 kernel: [ 0.280114] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Oct 19 08:56:07 burton-10 kernel: [ 0.280132] uhci_hcd 0000:00:10.0: UHCI Host Controller Oct 19 08:56:07 burton-10 kernel: [ 0.280227] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 Oct 19 08:56:07 burton-10 kernel: [ 0.280257] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c400 Oct 19 08:56:07 burton-10 kernel: [ 0.280377] usb usb2: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 0.280403] hub 2-0:1.0: USB hub found Oct 19 08:56:07 burton-10 kernel: [ 0.280413] hub 2-0:1.0: 2 ports detected Oct 19 08:56:07 burton-10 kernel: [ 0.280533] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 Oct 19 08:56:07 burton-10 kernel: [ 0.280538] uhci_hcd 0000:00:10.1: UHCI Host Controller Oct 19 08:56:07 burton-10 kernel: [ 0.280568] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 Oct 19 08:56:07 burton-10 kernel: [ 0.280587] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c000 Oct 19 08:56:07 burton-10 kernel: [ 0.280670] usb usb3: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 0.280690] hub 3-0:1.0: USB hub found Oct 19 08:56:07 burton-10 kernel: [ 0.280697] hub 3-0:1.0: 2 ports detected Oct 19 08:56:07 burton-10 kernel: [ 0.280761] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Oct 19 08:56:07 burton-10 kernel: [ 0.280766] uhci_hcd 0000:00:10.2: UHCI Host Controller Oct 19 08:56:07 burton-10 kernel: [ 0.280792] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 Oct 19 08:56:07 burton-10 kernel: [ 0.280810] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b800 Oct 19 08:56:07 burton-10 kernel: [ 0.280893] usb usb4: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 0.280911] hub 4-0:1.0: USB hub found Oct 19 08:56:07 burton-10 kernel: [ 0.280919] hub 4-0:1.0: 2 ports detected Oct 19 08:56:07 burton-10 kernel: [ 0.280976] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 Oct 19 08:56:07 burton-10 kernel: [ 0.280980] uhci_hcd 0000:00:10.3: UHCI Host Controller Oct 19 08:56:07 burton-10 kernel: [ 0.281012] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 Oct 19 08:56:07 burton-10 kernel: [ 0.281030] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000b400 Oct 19 08:56:07 burton-10 kernel: [ 0.281121] usb usb5: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 0.281143] hub 5-0:1.0: USB hub found Oct 19 08:56:07 burton-10 kernel: [ 0.281150] hub 5-0:1.0: 2 ports detected Oct 19 08:56:07 burton-10 kernel: [ 0.281235] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 Oct 19 08:56:07 burton-10 kernel: [ 0.281691] serio: i8042 KBD port at 0x60,0x64 irq 1 Oct 19 08:56:07 burton-10 kernel: [ 0.281696] serio: i8042 AUX port at 0x60,0x64 irq 12 Oct 19 08:56:07 burton-10 kernel: [ 0.281767] mice: PS/2 mouse device common for all mice Oct 19 08:56:07 burton-10 kernel: [ 0.281864] rtc_cmos 00:02: RTC can wake from S4 Oct 19 08:56:07 burton-10 kernel: [ 0.281910] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 Oct 19 08:56:07 burton-10 kernel: [ 0.281958] rtc0: alarms up to one year, y3k, 114 bytes nvram Oct 19 08:56:07 burton-10 kernel: [ 0.282096] device-mapper: uevent: version 1.0.3 Oct 19 08:56:07 burton-10 kernel: [ 0.282235] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com Oct 19 08:56:07 burton-10 kernel: [ 0.285185] device-mapper: multipath: version 1.1.0 loaded Oct 19 08:56:07 burton-10 kernel: [ 0.285192] device-mapper: multipath round-robin: version 1.0.0 loaded Oct 19 08:56:07 burton-10 kernel: [ 0.287009] cpuidle: using governor ladder Oct 19 08:56:07 burton-10 kernel: [ 0.287012] cpuidle: using governor menu Oct 19 08:56:07 burton-10 kernel: [ 0.287374] TCP cubic registered Oct 19 08:56:07 burton-10 kernel: [ 0.287516] NET: Registered protocol family 10 Oct 19 08:56:07 burton-10 kernel: [ 0.287953] lo: Disabled Privacy Extensions Oct 19 08:56:07 burton-10 kernel: [ 0.288196] NET: Registered protocol family 17 Oct 19 08:56:07 burton-10 kernel: [ 0.288238] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors (1 cpu cores) (version 2.20.00) Oct 19 08:56:07 burton-10 kernel: [ 0.288334] powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x8 Oct 19 08:56:07 burton-10 kernel: [ 0.288336] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 Oct 19 08:56:07 burton-10 kernel: [ 0.288338] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa Oct 19 08:56:07 burton-10 kernel: [ 0.288339] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc Oct 19 08:56:07 burton-10 kernel: [ 0.288341] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 Oct 19 08:56:07 burton-10 kernel: [ 0.288482] PM: Resume from disk failed. Oct 19 08:56:07 burton-10 kernel: [ 0.288495] registered taskstats version 1 Oct 19 08:56:07 burton-10 kernel: [ 0.288761] Magic number: 14:826:940 Oct 19 08:56:07 burton-10 kernel: [ 0.288860] rtc_cmos 00:02: setting system clock to 2010-10-19 14:55:57 UTC (1287500157) Oct 19 08:56:07 burton-10 kernel: [ 0.288863] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found Oct 19 08:56:07 burton-10 kernel: [ 0.288864] EDD information not available. Oct 19 08:56:07 burton-10 kernel: [ 0.304860] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 Oct 19 08:56:07 burton-10 kernel: [ 0.397274] Freeing initrd memory: 8146k freed Oct 19 08:56:07 burton-10 kernel: [ 0.405864] Freeing unused kernel memory: 872k freed Oct 19 08:56:07 burton-10 kernel: [ 0.406761] Write protecting the kernel read-only data: 7692k Oct 19 08:56:07 burton-10 kernel: [ 0.428136] udev: starting version 151 Oct 19 08:56:07 burton-10 kernel: [ 0.590087] usb 1-3: new high speed USB device using ehci_hcd and address 2 Oct 19 08:56:07 burton-10 kernel: [ 0.619490] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded Oct 19 08:56:07 burton-10 kernel: [ 0.619524] alloc irq_desc for 16 on node 0 Oct 19 08:56:07 burton-10 kernel: [ 0.619526] alloc kstat_irqs on node 0 Oct 19 08:56:07 burton-10 kernel: [ 0.619537] r8169 0000:00:0b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 19 08:56:07 burton-10 kernel: [ 0.619556] r8169 0000:00:0b.0: PCI: Disallowing DAC for device Oct 19 08:56:07 burton-10 kernel: [ 0.619575] r8169 0000:00:0b.0: no PCI Express capability Oct 19 08:56:07 burton-10 kernel: [ 0.620176] eth0: RTL8110s at 0xffffc90000518c00, 00:13:d3:35:fb:b5, XID 04000000 IRQ 16 Oct 19 08:56:07 burton-10 kernel: [ 0.624237] pata_via 0000:00:0f.1: version 0.3.4 Oct 19 08:56:07 burton-10 kernel: [ 0.624259] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20 Oct 19 08:56:07 burton-10 kernel: [ 0.627233] scsi0 : pata_via Oct 19 08:56:07 burton-10 kernel: [ 0.644198] scsi1 : pata_via Oct 19 08:56:07 burton-10 kernel: [ 0.645750] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 Oct 19 08:56:07 burton-10 kernel: [ 0.645753] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 Oct 19 08:56:07 burton-10 kernel: [ 0.663779] sata_via 0000:00:0f.0: version 2.4 Oct 19 08:56:07 burton-10 kernel: [ 0.663799] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 Oct 19 08:56:07 burton-10 kernel: [ 0.663846] sata_via 0000:00:0f.0: routed to hard irq line 11 Oct 19 08:56:07 burton-10 kernel: [ 0.664220] scsi2 : sata_via Oct 19 08:56:07 burton-10 kernel: [ 0.664352] scsi3 : sata_via Oct 19 08:56:07 burton-10 kernel: [ 0.666197] ata3: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xd000 irq 20 Oct 19 08:56:07 burton-10 kernel: [ 0.666200] ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xd400 bmdma 0xd008 irq 20 Oct 19 08:56:07 burton-10 kernel: [ 0.740432] usb 1-3: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 0.740802] hub 1-3:1.0: USB hub found Oct 19 08:56:07 burton-10 kernel: [ 0.740943] hub 1-3:1.0: 4 ports detected Oct 19 08:56:07 burton-10 kernel: [ 0.820471] ata1.00: ATA-6: WDC WD400JB-00FMA0, 13.03G13, max UDMA/100 Oct 19 08:56:07 burton-10 kernel: [ 0.820475] ata1.00: 78165360 sectors, multi 16: LBA Oct 19 08:56:07 burton-10 kernel: [ 0.840368] ata1.00: configured for UDMA/100 Oct 19 08:56:07 burton-10 kernel: [ 0.840495] scsi 0:0:0:0: Direct-Access ATA WDC WD400JB-00FM 13.0 PQ: 0 ANSI: 5 Oct 19 08:56:07 burton-10 kernel: [ 0.840663] sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 19 08:56:07 burton-10 kernel: [ 0.840979] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) Oct 19 08:56:07 burton-10 kernel: [ 0.841015] sd 0:0:0:0: [sda] Write Protect is off Oct 19 08:56:07 burton-10 kernel: [ 0.841017] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 19 08:56:07 burton-10 kernel: [ 0.841036] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Oct 19 08:56:07 burton-10 kernel: [ 0.841162] sda: sda1 sda2 < Oct 19 08:56:07 burton-10 kernel: [ 0.860019] usb 1-4: new high speed USB device using ehci_hcd and address 3 Oct 19 08:56:07 burton-10 kernel: [ 0.870012] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300) Oct 19 08:56:07 burton-10 kernel: [ 0.880663] sda5 > Oct 19 08:56:07 burton-10 kernel: [ 0.881080] sd 0:0:0:0: [sda] Attached SCSI disk Oct 19 08:56:07 burton-10 kernel: [ 1.010381] usb 1-4: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 1.010738] hub 1-4:1.0: USB hub found Oct 19 08:56:07 burton-10 kernel: [ 1.010813] hub 1-4:1.0: 4 ports detected Oct 19 08:56:07 burton-10 kernel: [ 1.020372] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S222A, SB02, max UDMA/66 Oct 19 08:56:07 burton-10 kernel: [ 1.020394] ata2.00: limited to UDMA/33 due to 40-wire cable Oct 19 08:56:07 burton-10 kernel: [ 1.060227] ata2.00: configured for UDMA/33 Oct 19 08:56:07 burton-10 kernel: [ 1.061345] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S222A SB02 PQ: 0 ANSI: 5 Oct 19 08:56:07 burton-10 kernel: [ 1.064930] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Oct 19 08:56:07 burton-10 kernel: [ 1.064933] Uniform CD-ROM driver Revision: 3.20 Oct 19 08:56:07 burton-10 kernel: [ 1.065133] sr 1:0:0:0: Attached scsi CD-ROM sr0 Oct 19 08:56:07 burton-10 kernel: [ 1.065230] sr 1:0:0:0: Attached scsi generic sg1 type 5 Oct 19 08:56:07 burton-10 kernel: [ 1.130021] usb 1-8: new high speed USB device using ehci_hcd and address 4 Oct 19 08:56:07 burton-10 kernel: [ 1.270016] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300) Oct 19 08:56:07 burton-10 kernel: [ 1.283026] usb 1-8: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 1.283695] hub 1-8:1.0: USB hub found Oct 19 08:56:07 burton-10 kernel: [ 1.284059] hub 1-8:1.0: 4 ports detected Oct 19 08:56:07 burton-10 kernel: [ 1.380191] usb 1-3.1: new high speed USB device using ehci_hcd and address 5 Oct 19 08:56:07 burton-10 kernel: [ 1.493649] usb 1-3.1: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 1.555239] EXT4-fs (sda1): mounted filesystem with ordered data mode Oct 19 08:56:07 burton-10 kernel: [ 1.581556] usb 1-3.2: new full speed USB device using ehci_hcd and address 6 Oct 19 08:56:07 burton-10 kernel: [ 1.699724] usb 1-3.2: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 1.780167] usb 1-3.3: new low speed USB device using ehci_hcd and address 7 Oct 19 08:56:07 burton-10 kernel: [ 1.897892] usb 1-3.3: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 1.970164] usb 1-4.1: new full speed USB device using ehci_hcd and address 8 Oct 19 08:56:07 burton-10 kernel: [ 2.080875] usb 1-4.1: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 2.081040] hub 1-4.1:1.0: USB hub found Oct 19 08:56:07 burton-10 kernel: [ 2.081140] hub 1-4.1:1.0: 4 ports detected Oct 19 08:56:07 burton-10 kernel: [ 2.160158] usb 1-4.2: new low speed USB device using ehci_hcd and address 9 Oct 19 08:56:07 burton-10 kernel: [ 2.240153] usb 1-4.2: device descriptor read/64, error -32 Oct 19 08:56:07 burton-10 kernel: [ 2.430277] usb 1-4.2: device descriptor read/64, error -32 Oct 19 08:56:07 burton-10 kernel: [ 2.620648] usb 1-4.2: new low speed USB device using ehci_hcd and address 10 Oct 19 08:56:07 burton-10 kernel: [ 2.700642] usb 1-4.2: device descriptor read/64, error -32 Oct 19 08:56:07 burton-10 kernel: [ 2.890641] usb 1-4.2: device descriptor read/64, error -32 Oct 19 08:56:07 burton-10 kernel: [ 3.080615] usb 1-4.2: new low speed USB device using ehci_hcd and address 11 Oct 19 08:56:07 burton-10 kernel: [ 3.500528] usb 1-4.2: device not accepting address 11, error -32 Oct 19 08:56:07 burton-10 kernel: [ 3.580601] usb 1-4.2: new low speed USB device using ehci_hcd and address 12 Oct 19 08:56:07 burton-10 kernel: [ 3.794756] Adding 1648632k swap on /dev/sda5. Priority:-1 extents:1 across:1648632k Oct 19 08:56:07 burton-10 kernel: [ 4.000017] usb 1-4.2: device not accepting address 12, error -32 Oct 19 08:56:07 burton-10 kernel: [ 4.000233] hub 1-4:1.0: unable to enumerate USB device on port 2 Oct 19 08:56:07 burton-10 kernel: [ 4.080591] usb 1-4.3: new low speed USB device using ehci_hcd and address 13 Oct 19 08:56:07 burton-10 kernel: [ 4.199064] usb 1-4.3: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 4.270887] usb 1-4.4: new high speed USB device using ehci_hcd and address 14 Oct 19 08:56:07 burton-10 kernel: [ 4.275361] udev: starting version 151 Oct 19 08:56:07 burton-10 kernel: [ 4.388596] usb 1-4.4: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 4.388911] hub 1-4.4:1.0: USB hub found Oct 19 08:56:07 burton-10 kernel: [ 4.389457] hub 1-4.4:1.0: 4 ports detected Oct 19 08:56:07 burton-10 kernel: [ 4.470341] usb 1-8.3: new full speed USB device using ehci_hcd and address 15 Oct 19 08:56:07 burton-10 kernel: [ 4.581946] usb 1-8.3: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 4.660330] usb 1-8.4: new high speed USB device using ehci_hcd and address 16 Oct 19 08:56:07 burton-10 kernel: [ 4.772443] usb 1-8.4: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 4.850568] usb 1-4.1.1: new low speed USB device using ehci_hcd and address 17 Oct 19 08:56:07 burton-10 kernel: [ 4.967214] usb 1-4.1.1: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 5.040193] usb 1-4.1.2: new full speed USB device using ehci_hcd and address 18 Oct 19 08:56:07 burton-10 kernel: [ 5.151383] usb 1-4.1.2: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 5.230444] usb 1-4.4.1: new low speed USB device using ehci_hcd and address 19 Oct 19 08:56:07 burton-10 kernel: [ 5.357126] vga16fb: initializing Oct 19 08:56:07 burton-10 kernel: [ 5.357131] vga16fb: mapped to 0xffff8800000a0000 Oct 19 08:56:07 burton-10 kernel: [ 5.357204] fb0: VGA16 VGA frame buffer device Oct 19 08:56:07 burton-10 kernel: [ 5.357454] usb 1-4.4.1: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 5.429288] EDAC MC: Ver: 2.1.0 Sep 17 2010 Oct 19 08:56:07 burton-10 kernel: [ 5.430433] usb 1-4.4.2: new full speed USB device using ehci_hcd and address 20 Oct 19 08:56:07 burton-10 kernel: [ 5.482557] ACPI: resource vt596_smbus [0x400-0x407] conflicts with ACPI region SMOV [0x000400-0x000406] Oct 19 08:56:07 burton-10 kernel: [ 5.482560] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Oct 19 08:56:07 burton-10 kernel: [ 5.490565] usbcore: registered new interface driver hiddev Oct 19 08:56:07 burton-10 kernel: [ 5.491631] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:10.4/usb1/1-3/1-3.2/1-3.2:1.3/input/input5 Oct 19 08:56:07 burton-10 kernel: [ 5.491758] generic-usb 0003:0D8C:013A.0001: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device ] on usb-0000:00:10.4-3.2/input3 Oct 19 08:56:07 burton-10 kernel: [ 5.520571] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:10.4/usb1/1-3/1-3.3/1-3.3:1.0/input/input6 Oct 19 08:56:07 burton-10 kernel: [ 5.520705] generic-usb 0003:04D9:1400.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 04d9:1400] on usb-0000:00:10.4-3.3/input0 Oct 19 08:56:07 burton-10 kernel: [ 5.542046] usb 1-4.4.2: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 5.552634] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Oct 19 08:56:07 burton-10 kernel: [ 5.582224] input: HID 04d9:1400 as /devices/pci0000:00/0000:00:10.4/usb1/1-3/1-3.3/1-3.3:1.1/input/input7 Oct 19 08:56:07 burton-10 kernel: [ 5.582371] generic-usb 0003:04D9:1400.0003: input,hidraw2: USB HID v1.10 Mouse [HID 04d9:1400] on usb-0000:00:10.4-3.3/input1 Oct 19 08:56:07 burton-10 kernel: [ 5.587444] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:10.4/usb1/1-4/1-4.3/1-4.3:1.0/input/input8 Oct 19 08:56:07 burton-10 kernel: [ 5.587569] generic-usb 0003:0A81:0101.0004: input,hidraw3: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:10.4-4.3/input0 Oct 19 08:56:07 burton-10 kernel: [ 5.620434] usb 1-4.4.3: new full speed USB device using ehci_hcd and address 21 Oct 19 08:56:07 burton-10 kernel: [ 5.627744] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:10.4/usb1/1-4/1-4.3/1-4.3:1.1/input/input9 Oct 19 08:56:07 burton-10 kernel: [ 5.627856] generic-usb 0003:0A81:0101.0005: input,hidraw4: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:10.4-4.3/input1 Oct 19 08:56:07 burton-10 kernel: [ 5.660420] input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:10.4/usb1/1-8/1-8.3/1-8.3:1.3/input/input10 Oct 19 08:56:07 burton-10 kernel: [ 5.660556] generic-usb 0003:0D8C:0139.0006: input,hidraw5: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device ] on usb-0000:00:10.4-8.3/input3 Oct 19 08:56:07 burton-10 kernel: [ 5.665492] lp: driver loaded but no devices found Oct 19 08:56:07 burton-10 kernel: [ 5.714195] input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:10.4/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.0/input/input11 Oct 19 08:56:07 burton-10 kernel: [ 5.714318] generic-usb 0003:05D5:6782.0007: input,hidraw6: USB HID v1.10 Keyboard [KEYBOARD USB KB] on usb-0000:00:10.4-4.1.1/input0 Oct 19 08:56:07 burton-10 kernel: [ 5.731544] usb 1-4.4.3: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 5.732181] hub 1-4.4.3:1.0: USB hub found Oct 19 08:56:07 burton-10 kernel: [ 5.732404] hub 1-4.4.3:1.0: 3 ports detected Oct 19 08:56:07 burton-10 kernel: [ 5.800891] input: KEYBOARD USB KB as /devices/pci0000:00/0000:00:10.4/usb1/1-4/1-4.1/1-4.1.1/1-4.1.1:1.1/input/input12 Oct 19 08:56:07 burton-10 kernel: [ 5.801039] generic-usb 0003:05D5:6782.0008: input,hidraw7: USB HID v1.10 Mouse [KEYBOARD USB KB] on usb-0000:00:10.4-4.1.1/input1 Oct 19 08:56:07 burton-10 kernel: [ 5.868342] input: C-Media USB Headphone Set as /devices/pci0000:00/0000:00:10.4/usb1/1-4/1-4.1/1-4.1.2/1-4.1.2:1.3/input/input13 Oct 19 08:56:07 burton-10 kernel: [ 5.868463] generic-usb 0003:0D8C:000C.0009: input,hidraw8: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:10.4-4.1.2/input3 Oct 19 08:56:07 burton-10 kernel: [ 5.894171] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.4/usb1/1-4/1-4.4/1-4.4.1/1-4.4.1:1.0/input/input14 Oct 19 08:56:07 burton-10 kernel: [ 5.894309] generic-usb 0003:046D:C03E.000A: input,hidraw9: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.4-4.4.1/input0 Oct 19 08:56:07 burton-10 kernel: [ 5.894391] usbcore: registered new interface driver usbhid Oct 19 08:56:07 burton-10 kernel: [ 5.894394] usbhid: v2.6:USB HID core driver Oct 19 08:56:07 burton-10 kernel: [ 6.010306] usb 1-4.4.3.1: new full speed USB device using ehci_hcd and address 22 Oct 19 08:56:07 burton-10 kernel: [ 6.121437] usb 1-4.4.3.1: configuration #1 chosen from 1 choice Oct 19 08:56:07 burton-10 kernel: [ 6.122986] input: Silitek IBM USB HUB KEYBOARD as /devices/pci0000:00/0000:00:10.4/usb1/1-4/1-4.4/1-4.4.3/1-4.4.3.1/1-4.4.3.1:1.0/input/input15 Oct 19 08:56:07 burton-10 kernel: [ 6.123118] generic-usb 0003:04B3:3005.000B: input,hidraw10: USB HID v1.10 Keyboard [Silitek IBM USB HUB KEYBOARD] on usb-0000:00:10.4-4.4.3.1/input0 Oct 19 08:56:07 burton-10 kernel: [ 6.230309] type=1505 audit(1287500163.441:2): operation="profile_load" pid=1481 name="/sbin/dhclient3" Oct 19 08:56:07 burton-10 kernel: [ 6.230800] type=1505 audit(1287500163.441:3): operation="profile_load" pid=1481 name="/usr/lib/NetworkManager/nm-dhcp-client.action" Oct 19 08:56:07 burton-10 kernel: [ 6.230933] type=1505 audit(1287500163.441:4): operation="profile_load" pid=1481 name="/usr/lib/connman/scripts/dhclient-script" Oct 19 08:56:07 burton-10 kernel: [ 6.737710] nvidia: module license 'NVIDIA' taints kernel. Oct 19 08:56:07 burton-10 kernel: [ 6.737715] Disabling lock debugging due to kernel taint Oct 19 08:56:07 burton-10 kernel: [ 7.263665] EDAC amd64_edac: Ver: 3.2.0 Sep 17 2010 Oct 19 08:56:07 burton-10 kernel: [ 7.361116] EDAC amd64: ECC is enabled by BIOS. Oct 19 08:56:07 burton-10 kernel: [ 7.361184] EDAC MC: Rev E or earlier detected Oct 19 08:56:07 burton-10 kernel: [ 7.361253] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2 Oct 19 08:56:07 burton-10 kernel: [ 7.361273] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) Oct 19 08:56:07 burton-10 kernel: [ 7.558263] Console: switching to colour frame buffer device 80x30 Oct 19 08:56:07 burton-10 kernel: [ 7.614636] nvidia 0000:00:05.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Oct 19 08:56:07 burton-10 kernel: [ 7.615554] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.22 Wed Nov 11 05:08:25 PST 2009 Oct 19 08:56:07 burton-10 kernel: [ 8.015725] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input16 Oct 19 08:56:07 burton-10 kernel: [ 8.712692] alloc irq_desc for 22 on node 0 Oct 19 08:56:07 burton-10 kernel: [ 8.712695] alloc kstat_irqs on node 0 Oct 19 08:56:07 burton-10 kernel: [ 8.712754] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 Oct 19 08:56:07 burton-10 kernel: [ 8.714020] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 Oct 19 08:56:09 burton-10 kernel: [ 11.928112] type=1505 audit(1287500169.131:5): operation="profile_load" pid=2366 name="/usr/share/gdm/guest-session/Xsession" Oct 19 08:56:09 burton-10 kernel: [ 11.929918] type=1505 audit(1287500169.131:6): operation="profile_replace" pid=2367 name="/sbin/dhclient3" Oct 19 08:56:09 burton-10 kernel: [ 11.930170] type=1505 audit(1287500169.131:7): operation="profile_replace" pid=2367 name="/usr/lib/NetworkManager/nm-dhcp-client.action" Oct 19 08:56:09 burton-10 kernel: [ 11.930311] type=1505 audit(1287500169.131:8): operation="profile_replace" pid=2367 name="/usr/lib/connman/scripts/dhclient-script" Oct 19 08:56:09 burton-10 NetworkManager: starting... Oct 19 08:56:09 burton-10 kernel: [ 12.132478] type=1505 audit(1287500169.341:9): operation="profile_load" pid=2368 name="/usr/bin/evince" Oct 19 08:56:09 burton-10 kernel: [ 12.135844] type=1505 audit(1287500169.341:10): operation="profile_load" pid=2368 name="/usr/bin/evince-previewer" Oct 19 08:56:09 burton-10 kernel: [ 12.137807] type=1505 audit(1287500169.341:11): operation="profile_load" pid=2368 name="/usr/bin/evince-thumbnailer" Oct 19 08:56:09 burton-10 NetworkManager: Trying to start the modem-manager... Oct 19 08:56:09 burton-10 NetworkManager: SCPlugin-Ifupdown: init! Oct 19 08:56:09 burton-10 NetworkManager: SCPlugin-Ifupdown: update_system_hostname Oct 19 08:56:09 burton-10 NetworkManager: SCPluginIfupdown: management mode: unmanaged Oct 19 08:56:09 burton-10 NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:0b.0/net/eth0, iface: eth0) Oct 19 08:56:09 burton-10 NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:0b.0/net/eth0, iface: eth0): no ifupdown configuration found. Oct 19 08:56:09 burton-10 NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) Oct 19 08:56:09 burton-10 NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found. Oct 19 08:56:09 burton-10 NetworkManager: SCPlugin-Ifupdown: end _init. Oct 19 08:56:09 burton-10 NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. Oct 19 08:56:09 burton-10 NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. Oct 19 08:56:09 burton-10 NetworkManager: WiFi enabled by radio killswitch; enabled by state file Oct 19 08:56:09 burton-10 NetworkManager: WWAN enabled by radio killswitch; enabled by state file Oct 19 08:56:09 burton-10 NetworkManager: SCPlugin-Ifupdown: (27620640) ... get_connections. Oct 19 08:56:09 burton-10 NetworkManager: SCPlugin-Ifupdown: (27620640) ... get_connections (managed=false): return empty list. Oct 19 08:56:09 burton-10 kernel: [ 12.401861] type=1505 audit(1287500169.611:12): operation="profile_load" pid=2372 name="/usr/bin/freshclam" Oct 19 08:56:09 burton-10 modem-manager: Loaded plugin ZTE Oct 19 08:56:09 burton-10 modem-manager: Loaded plugin Ericsson MBM Oct 19 08:56:09 burton-10 modem-manager: Loaded plugin Novatel Oct 19 08:56:09 burton-10 modem-manager: Loaded plugin Gobi Oct 19 08:56:09 burton-10 modem-manager: Loaded plugin Option High-Speed Oct 19 08:56:09 burton-10 modem-manager: Loaded plugin AnyData Oct 19 08:56:09 burton-10 modem-manager: Loaded plugin Option Oct 19 08:56:09 burton-10 modem-manager: Loaded plugin Huawei Oct 19 08:56:09 burton-10 modem-manager: Loaded plugin MotoC Oct 19 08:56:09 burton-10 modem-manager: Loaded plugin Sierra Oct 19 08:56:09 burton-10 modem-manager: Loaded plugin Nokia Oct 19 08:56:09 burton-10 modem-manager: Loaded plugin Longcheer Oct 19 08:56:09 burton-10 NetworkManager: Ifupdown: get unmanaged devices count: 0 Oct 19 08:56:09 burton-10 kernel: [ 12.502725] type=1505 audit(1287500169.711:13): operation="profile_load" pid=2374 name="/usr/lib/cups/backend/cups-pdf" Oct 19 08:56:09 burton-10 kernel: [ 12.503021] type=1505 audit(1287500169.711:14): operation="profile_load" pid=2374 name="/usr/sbin/cupsd" Oct 19 08:56:09 burton-10 modem-manager: Loaded plugin Generic Oct 19 08:56:09 burton-10 NetworkManager: (eth0): carrier is OFF Oct 19 08:56:09 burton-10 NetworkManager: (eth0): new Ethernet device (driver: 'r8169') Oct 19 08:56:09 burton-10 NetworkManager: (eth0): exported as /org/freedesktop/NetworkManager/Devices/0 Oct 19 08:56:09 burton-10 NetworkManager: (eth0): now managed Oct 19 08:56:09 burton-10 NetworkManager: (eth0): device state change: 1 -> 2 (reason 2) Oct 19 08:56:09 burton-10 NetworkManager: (eth0): bringing up device. Oct 19 08:56:09 burton-10 NetworkManager: (eth0): preparing device. Oct 19 08:56:09 burton-10 NetworkManager: (eth0): deactivating device (reason: 2). Oct 19 08:56:09 burton-10 NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:0b.0/net/eth0 Oct 19 08:56:09 burton-10 NetworkManager: (eth0): carrier now ON (device state 2) Oct 19 08:56:09 burton-10 NetworkManager: (eth0): device state change: 2 -> 3 (reason 40) Oct 19 08:56:09 burton-10 NetworkManager: default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files Oct 19 08:56:09 burton-10 NetworkManager: modem-manager is now available Oct 19 08:56:09 burton-10 kernel: [ 12.730239] r8169: eth0: link up Oct 19 08:56:09 burton-10 NetworkManager: Trying to start the supplicant... Oct 19 08:56:09 burton-10 NetworkManager: Activation (eth0) starting connection 'Auto eth0' Oct 19 08:56:09 burton-10 NetworkManager: (eth0): device state change: 3 -> 4 (reason 0) Oct 19 08:56:09 burton-10 NetworkManager: Activation (eth0) Stage 1 of 5 (Device Prepare) scheduled... Oct 19 08:56:09 burton-10 NetworkManager: Activation (eth0) Stage 1 of 5 (Device Prepare) started... Oct 19 08:56:09 burton-10 NetworkManager: Activation (eth0) Stage 2 of 5 (Device Configure) scheduled... Oct 19 08:56:09 burton-10 NetworkManager: Activation (eth0) Stage 1 of 5 (Device Prepare) complete. Oct 19 08:56:09 burton-10 NetworkManager: Activation (eth0) Stage 2 of 5 (Device Configure) starting... Oct 19 08:56:09 burton-10 NetworkManager: (eth0): device state change: 4 -> 5 (reason 0) Oct 19 08:56:09 burton-10 NetworkManager: Activation (eth0) Stage 2 of 5 (Device Configure) successful. Oct 19 08:56:09 burton-10 NetworkManager: Activation (eth0) Stage 3 of 5 (IP Configure Start) scheduled. Oct 19 08:56:09 burton-10 NetworkManager: Activation (eth0) Stage 2 of 5 (Device Configure) complete. Oct 19 08:56:09 burton-10 NetworkManager: Activation (eth0) Stage 3 of 5 (IP Configure Start) started... Oct 19 08:56:09 burton-10 NetworkManager: (eth0): device state change: 5 -> 7 (reason 0) Oct 19 08:56:09 burton-10 NetworkManager: Activation (eth0) Beginning DHCP transaction (timeout in 45 seconds) Oct 19 08:56:10 burton-10 NetworkManager: dhclient started with pid 2388 Oct 19 08:56:10 burton-10 NetworkManager: Activation (eth0) Stage 4 of 5 (IP6 Configure Get) scheduled... Oct 19 08:56:10 burton-10 NetworkManager: Activation (eth0) Stage 3 of 5 (IP Configure Start) complete. Oct 19 08:56:10 burton-10 NetworkManager: Activation (eth0) Stage 4 of 5 (IP6 Configure Get) started... Oct 19 08:56:10 burton-10 NetworkManager: Activation (eth0) Stage 4 of 5 (IP6 Configure Get) complete. Oct 19 08:56:10 burton-10 dhclient: Internet Systems Consortium DHCP Client V3.1.3 Oct 19 08:56:10 burton-10 dhclient: Copyright 2004-2009 Internet Systems Consortium. Oct 19 08:56:10 burton-10 dhclient: All rights reserved. Oct 19 08:56:10 burton-10 dhclient: For info, please visit https://www.isc.org/software/dhcp/ Oct 19 08:56:10 burton-10 dhclient: Oct 19 08:56:10 burton-10 dhclient: Listening on LPF/eth0/00:13:d3:35:fb:b5 Oct 19 08:56:10 burton-10 dhclient: Sending on LPF/eth0/00:13:d3:35:fb:b5 Oct 19 08:56:10 burton-10 dhclient: Sending on Socket/fallback Oct 19 08:56:10 burton-10 NetworkManager: DHCP: device eth0 state changed (null) -> preinit Oct 19 08:56:12 burton-10 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 Oct 19 08:56:13 burton-10 kernel: [ 16.725912] cm109: Keymap for Komunikate KIP1000 phone loaded Oct 19 08:56:13 burton-10 kernel: [ 16.726185] input: CM109 USB driver as /devices/pci0000:00/0000:00:10.4/usb1/1-4/1-4.4/1-4.4.2/1-4.4.2:1.3/input/input17 Oct 19 08:56:13 burton-10 kernel: [ 16.726433] usbcore: registered new interface driver cm109 Oct 19 08:56:13 burton-10 kernel: [ 16.726870] cm109: CM109 phone driver: 20080805 (C) Alfred E. Heggestad Oct 19 08:56:14 burton-10 kernel: [ 16.982498] usbcore: registered new interface driver snd-usb-audio Oct 19 08:56:15 burton-10 kernel: [ 17.971526] ppdev: user-space parallel port driver Oct 19 08:56:16 burton-10 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 Oct 19 08:56:20 burton-10 kernel: [ 23.450032] eth0: no IPv6 routers present Oct 19 08:56:23 burton-10 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 Oct 19 08:56:32 burton-10 dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 21 Oct 19 08:56:32 burton-10 dhclient: DHCPOFFER of 192.168.123.128 from 192.168.123.2 Oct 19 08:56:32 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 255.255.255.255 port 67 Oct 19 08:56:33 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 08:56:33 burton-10 NetworkManager: DHCP: device eth0 state changed preinit -> bound Oct 19 08:56:33 burton-10 NetworkManager: Activation (eth0) Stage 4 of 5 (IP4 Configure Get) scheduled... Oct 19 08:56:33 burton-10 NetworkManager: Activation (eth0) Stage 4 of 5 (IP4 Configure Get) started... Oct 19 08:56:33 burton-10 NetworkManager: address 192.168.123.128 Oct 19 08:56:33 burton-10 NetworkManager: prefix 24 (255.255.255.0) Oct 19 08:56:33 burton-10 NetworkManager: gateway 192.168.123.2 Oct 19 08:56:33 burton-10 NetworkManager: nameserver '192.168.123.227' Oct 19 08:56:33 burton-10 NetworkManager: nameserver '192.168.123.249' Oct 19 08:56:33 burton-10 NetworkManager: nameserver '192.168.123.226' Oct 19 08:56:33 burton-10 NetworkManager: domain name 'userful.ca' Oct 19 08:56:33 burton-10 NetworkManager: Activation (eth0) Stage 5 of 5 (IP Configure Commit) scheduled... Oct 19 08:56:33 burton-10 NetworkManager: Activation (eth0) Stage 4 of 5 (IP4 Configure Get) complete. Oct 19 08:56:33 burton-10 NetworkManager: Activation (eth0) Stage 5 of 5 (IP Configure Commit) started... Oct 19 08:56:33 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 431 seconds. Oct 19 08:56:34 burton-10 NetworkManager: (eth0): device state change: 7 -> 8 (reason 0) Oct 19 08:56:34 burton-10 NetworkManager: Policy set 'Auto eth0' (eth0) as default for routing and DNS. Oct 19 08:56:34 burton-10 NetworkManager: Activation (eth0) successful, device activated. Oct 19 08:56:34 burton-10 NetworkManager: Activation (eth0) Stage 5 of 5 (IP Configure Commit) complete. Oct 19 08:57:18 burton-10 kernel: [ 88.660026] Clocksource tsc unstable (delta = -301401788 ns) Oct 19 09:03:44 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 09:03:45 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 09:03:45 burton-10 NetworkManager: DHCP: device eth0 state changed bound -> renew Oct 19 09:03:45 burton-10 NetworkManager: address 192.168.123.128 Oct 19 09:03:45 burton-10 NetworkManager: prefix 24 (255.255.255.0) Oct 19 09:03:45 burton-10 NetworkManager: gateway 192.168.123.2 Oct 19 09:03:45 burton-10 NetworkManager: nameserver '192.168.123.227' Oct 19 09:03:45 burton-10 NetworkManager: nameserver '192.168.123.249' Oct 19 09:03:45 burton-10 NetworkManager: nameserver '192.168.123.226' Oct 19 09:03:45 burton-10 NetworkManager: domain name 'userful.ca' Oct 19 09:03:45 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 399 seconds. Oct 19 09:10:24 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 09:10:25 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 09:10:25 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 439 seconds. Oct 19 09:17:44 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 09:17:45 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 09:17:45 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 355 seconds. Oct 19 09:23:40 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 09:23:41 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 09:23:41 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 359 seconds. Oct 19 09:29:40 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 09:29:41 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 09:29:41 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 376 seconds. Oct 19 09:35:57 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 09:35:58 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 09:35:58 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 421 seconds. Oct 19 09:42:59 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 09:43:00 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 09:43:00 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 346 seconds. Oct 19 09:48:46 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 09:48:47 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 09:48:47 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 356 seconds. Oct 19 09:54:43 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 09:54:44 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 09:54:44 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 431 seconds. Oct 19 10:01:55 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 10:01:56 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 10:01:56 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 374 seconds. Oct 19 10:08:10 burton-10 dhclient: DHCPREQUEST of 192.168.123.128 on eth0 to 192.168.123.2 port 67 Oct 19 10:08:11 burton-10 dhclient: DHCPACK of 192.168.123.128 from 192.168.123.2 Oct 19 10:08:11 burton-10 dhclient: bound to 192.168.123.128 -- renewal in 433 seconds.