[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-22-generic (buildd@rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #34-Ubuntu SMP Sun Oct 10 09:24:00 UTC 2010 (Ubuntu 2.6.35-22.34-generic 2.6.35.4) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003dff0000 (usable) [ 0.000000] BIOS-e820: 000000003dff0000 - 000000003dffffc0 (ACPI data) [ 0.000000] BIOS-e820: 000000003dffffc0 - 000000003e000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.3 present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3dff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 base 020000000 mask FF0000000 write-back [ 0.000000] 2 base 030000000 mask FF8000000 write-back [ 0.000000] 3 base 038000000 mask FFC000000 write-back [ 0.000000] 4 base 03C000000 mask FFE000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved) [ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003dff0000 (usable) [ 0.000000] modified: 000000003dff0000 - 000000003dffffc0 (ACPI data) [ 0.000000] modified: 000000003dffffc0 - 000000003e000000 (ACPI NVS) [ 0.000000] modified: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000 [ 0.000000] RAMDISK: 2d9a8000 - 2e834000 [ 0.000000] ACPI: RSDP 000e6010 00014 (v00 OID_00) [ 0.000000] ACPI: RSDT 3dffcd16 00034 (v01 INSYDE RSDT_000 00000001 _CSI 00010103) [ 0.000000] ACPI: FACP 3dfffb00 00074 (v01 INSYDE FACP_000 00000100 _CSI 00010103) [ 0.000000] ACPI: DSDT 3dffcfb0 02B44 (v01 INSYDE INTELIC4 00001004 INTL 02002025) [ 0.000000] ACPI: FACS 3dffffc0 00040 [ 0.000000] ACPI: BOOT 3dfffb90 00028 (v01 INSYDE SYS_BOOT 00000100 _CSI 00010103) [ 0.000000] ACPI: DBGP 3dfffbc0 00034 (v01 INSYDE DBGP_000 00000100 _CSI 00010103) [ 0.000000] ACPI: SSDT 3dffcd4a 0010C (v01 INSYDE GV3Ref 00001001 INTL 02012044) [ 0.000000] 103MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003dff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x00000002 [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003dff0 [ 0.000000] On node 0 totalpages: 253824 [ 0.000000] free_area_init_node: node 0, pgdat c07ffd40, node_mem_map c1001020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 208 pages used for memmap [ 0.000000] HighMem zone: 26402 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3e000000 (gap: 3e000000:c1b80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] early_res array is doubled to 64 at [16000 - 167ff] [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36416 r0 d20928 u4194304 [ 0.000000] pcpu-alloc: s36416 r0 d20928 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251840 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=260f888b-e25c-42e1-b3a6-474579cbee3b ro splash quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5078700 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Subtract (41 early reservations) [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE [ 0.000000] #2 [0000100000 - 00009a0adc] TEXT DATA BSS [ 0.000000] #3 [002d9a8000 - 002e834000] RAMDISK [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved [ 0.000000] #5 [00009a1000 - 00009a4104] BRK [ 0.000000] #6 [0000010000 - 0000011000] TRAMPOLINE [ 0.000000] #7 [0000011000 - 0000015000] ACPI WAKEUP [ 0.000000] #8 [0000015000 - 0000016000] PGTABLE [ 0.000000] #9 [0001000000 - 0001001000] BOOTMEM [ 0.000000] #10 [0001001000 - 00017c1000] BOOTMEM [ 0.000000] #11 [00017c1000 - 00017c1004] BOOTMEM [ 0.000000] #12 [00017c1040 - 00017c1100] BOOTMEM [ 0.000000] #13 [00017c1100 - 00017c1154] BOOTMEM [ 0.000000] #14 [00017c1180 - 00017c4180] BOOTMEM [ 0.000000] #15 [00017c4180 - 00017c418c] BOOTMEM [ 0.000000] #16 [00017c41c0 - 00017c47c0] BOOTMEM [ 0.000000] #17 [00017c47c0 - 00017c48f4] BOOTMEM [ 0.000000] #18 [00017c4900 - 00017c4940] BOOTMEM [ 0.000000] #19 [00017c4940 - 00017c4980] BOOTMEM [ 0.000000] #20 [00017c4980 - 00017c49c0] BOOTMEM [ 0.000000] #21 [00017c49c0 - 00017c4a00] BOOTMEM [ 0.000000] #22 [00017c4a00 - 00017c4a40] BOOTMEM [ 0.000000] #23 [00017c4a40 - 00017c4a80] BOOTMEM [ 0.000000] #24 [00017c4a80 - 00017c4ac0] BOOTMEM [ 0.000000] #25 [00017c4ac0 - 00017c4b00] BOOTMEM [ 0.000000] #26 [00017c4b00 - 00017c4b10] BOOTMEM [ 0.000000] #27 [00017c4b40 - 00017c4b50] BOOTMEM [ 0.000000] #28 [00017c4b80 - 00017c4bea] BOOTMEM [ 0.000000] #29 [00017c4c00 - 00017c4c6a] BOOTMEM [ 0.000000] #30 [0001800000 - 000180e000] BOOTMEM [ 0.000000] #31 [00017c6c80 - 00017c6c84] BOOTMEM [ 0.000000] #32 [00017c6cc0 - 00017c6cc4] BOOTMEM [ 0.000000] #33 [00017c6d00 - 00017c6d04] BOOTMEM [ 0.000000] #34 [00017c6d40 - 00017c6d44] BOOTMEM [ 0.000000] #35 [00017c6d80 - 00017c6e30] BOOTMEM [ 0.000000] #36 [00017c6e40 - 00017c6ee8] BOOTMEM [ 0.000000] #37 [00017c6f00 - 00017caf00] BOOTMEM [ 0.000000] #38 [000180e000 - 000188e000] BOOTMEM [ 0.000000] #39 [000188e000 - 00018ce000] BOOTMEM [ 0.000000] #40 [00018ce000 - 0001da5eac] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (000377fe:0003dff0) [ 0.000000] Memory: 977760k/1015744k available (4928k kernel code, 37536k reserved, 2336k data, 684k init, 106440k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0819000 - 0xc08c4000 ( 684 kB) [ 0.000000] .data : 0xc05d030e - 0xc0818668 (2336 kB) [ 0.000000] .text : 0xc0100000 - 0xc05d030e (4928 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1792.857 MHz processor. [ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3585.71 BogoMIPS (lpj=7171428) [ 0.008012] pid_max: default: 32768 minimum: 301 [ 0.008038] Security Framework initialized [ 0.008066] AppArmor: AppArmor initialized [ 0.008069] Yama: becoming mindful. [ 0.008145] Mount-cache hash table entries: 512 [ 0.012069] Initializing cgroup subsys ns [ 0.012074] Initializing cgroup subsys cpuacct [ 0.012079] Initializing cgroup subsys memory [ 0.012090] Initializing cgroup subsys devices [ 0.012093] Initializing cgroup subsys freezer [ 0.012096] Initializing cgroup subsys net_cls [ 0.012132] mce: CPU supports 5 MCE banks [ 0.012148] Performance Events: [ 0.012151] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.012154] no hardware sampling interrupt available. [ 0.012157] p6 PMU driver. [ 0.012163] ... version: 0 [ 0.012166] ... bit width: 32 [ 0.012168] ... generic registers: 2 [ 0.012170] ... value mask: 00000000ffffffff [ 0.012173] ... max period: 000000007fffffff [ 0.012175] ... fixed-purpose events: 0 [ 0.012178] ... event mask: 0000000000000003 [ 0.013146] SMP alternatives: switching to UP code [ 0.020908] Freeing SMP alternatives: 24k freed [ 0.020918] ACPI: Core revision 20100428 [ 0.025186] ACPI: setting ELCR to 0200 (from 0ca8) [ 0.028007] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.028013] ftrace: allocating 21758 entries in 43 pages [ 0.032083] weird, boot CPU (#0) not listed by the BIOS. [ 0.032087] SMP motherboard not detected. [ 0.032090] Local APIC not detected. Using dummy APIC emulation. [ 0.032092] SMP disabled [ 0.032224] Brought up 1 CPUs [ 0.032226] Total of 1 processors activated (3585.71 BogoMIPS). [ 0.036189] devtmpfs: initialized [ 0.038294] regulator: core version 0.5 [ 0.038315] Time: 10:37:02 Date: 10/13/10 [ 0.038358] NET: Registered protocol family 16 [ 0.038500] EISA bus registered [ 0.038511] ACPI: bus type pci registered [ 0.038624] PCI: PCI BIOS revision 2.10 entry at 0xe9854, last bus=1 [ 0.038627] PCI: Using configuration type 1 for base access [ 0.040561] bio: create slab at 0 [ 0.041308] ACPI: EC: Look up EC in DSDT [ 0.043444] ACPI: Interpreter enabled [ 0.043448] ACPI: (supports S0 S3 S4 S5) [ 0.043473] ACPI: Using PIC for interrupt routing [ 0.044320] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.060149] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.063381] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.063559] ACPI: No dock devices found. [ 0.063564] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.063731] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.064062] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.064066] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.064070] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.064073] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.064076] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000cffff] (ignored) [ 0.064080] pci_root PNP0A03:00: host bridge window [mem 0xffb80000-0xffbfffff] (ignored) [ 0.064083] pci_root PNP0A03:00: host bridge window [mem 0xfff80000-0xffffffff] (ignored) [ 0.064087] pci_root PNP0A03:00: host bridge window [mem 0x3e000000-0xfebfffff] (ignored) [ 0.064199] pci 0000:00:02.0: reg 10: [mem 0xb0000000-0xb7ffffff pref] [ 0.064205] pci 0000:00:02.0: reg 14: [mem 0xf0000000-0xf007ffff] [ 0.064210] pci 0000:00:02.0: reg 18: [io 0xe000-0xe007] [ 0.064229] pci 0000:00:02.0: supports D1 [ 0.064245] pci 0000:00:02.1: reg 10: [mem 0x00000000-0x07ffffff pref] [ 0.064251] pci 0000:00:02.1: reg 14: [mem 0x00000000-0x0007ffff] [ 0.064272] pci 0000:00:02.1: supports D1 [ 0.064339] pci 0000:00:1d.0: reg 20: [io 0x1200-0x121f] [ 0.064386] pci 0000:00:1d.1: reg 20: [io 0x1600-0x161f] [ 0.064433] pci 0000:00:1d.2: reg 20: [io 0x1700-0x171f] [ 0.064481] pci 0000:00:1d.7: reg 10: [mem 0xfebff000-0xfebff3ff] [ 0.064533] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.064538] pci 0000:00:1d.7: PME# disabled [ 0.064616] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO [ 0.064620] pci 0000:00:1f.0: quirk: [io 0x1300-0x133f] claimed by ICH4 GPIO [ 0.064641] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.064648] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.064655] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.064662] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.064669] pci 0000:00:1f.1: reg 20: [io 0x1100-0x110f] [ 0.064675] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] [ 0.064721] pci 0000:00:1f.3: reg 20: [io 0x1400-0x141f] [ 0.064757] pci 0000:00:1f.5: reg 10: [io 0xe100-0xe1ff] [ 0.064764] pci 0000:00:1f.5: reg 14: [io 0xe200-0xe23f] [ 0.064770] pci 0000:00:1f.5: reg 18: [mem 0xf0080400-0xf00805ff] [ 0.064777] pci 0000:00:1f.5: reg 1c: [mem 0xf0080600-0xf00806ff] [ 0.064803] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.064808] pci 0000:00:1f.5: PME# disabled [ 0.064831] pci 0000:00:1f.6: reg 10: [io 0xe300-0xe3ff] [ 0.064838] pci 0000:00:1f.6: reg 14: [io 0xe400-0xe47f] [ 0.064871] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.064875] pci 0000:00:1f.6: PME# disabled [ 0.064913] pci 0000:01:01.0: reg 10: [mem 0xe0001000-0xe0001fff] [ 0.064952] pci 0000:01:01.0: PME# supported from D0 D3hot D3cold [ 0.064957] pci 0000:01:01.0: PME# disabled [ 0.064982] pci 0000:01:02.0: reg 10: [io 0xc000-0xc0ff] [ 0.064989] pci 0000:01:02.0: reg 14: [mem 0xe0000000-0xe00000ff] [ 0.065025] pci 0000:01:02.0: supports D1 D2 [ 0.065028] pci 0000:01:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.065032] pci 0000:01:02.0: PME# disabled [ 0.065058] pci 0000:01:03.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.065075] pci 0000:01:03.0: supports D1 D2 [ 0.065077] pci 0000:01:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.065082] pci 0000:01:03.0: PME# disabled [ 0.065116] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.065122] pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff] [ 0.065127] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xefffffff] [ 0.065132] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xafffffff pref] [ 0.065135] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.065138] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.065172] pci_bus 0000:02: [bus 02-05] partially hidden behind transparent bridge 0000:01 [bus 01-01] [ 0.065182] pci_bus 0000:00: on NUMA node 0 [ 0.065186] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.065251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 0.068996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7) *10 [ 0.069115] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *5 [ 0.069228] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 10 *11) [ 0.069344] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 10 *11) [ 0.069451] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 10 11) [ 0.069538] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 10 11) *0, disabled. [ 0.069626] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 10 11) *0, disabled. [ 0.069727] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 10 11) *7 [ 0.069766] HEST: Table is not found! [ 0.069845] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.069855] vgaarb: loaded [ 0.070034] SCSI subsystem initialized [ 0.070075] libata version 3.00 loaded. [ 0.070132] usbcore: registered new interface driver usbfs [ 0.070152] usbcore: registered new interface driver hub [ 0.070180] usbcore: registered new device driver usb [ 0.070328] ACPI: WMI: Mapper loaded [ 0.070331] PCI: Using ACPI for IRQ routing [ 0.070334] PCI: pci_cache_line_size set to 64 bytes [ 0.070392] reserve RAM buffer: 0000000000002000 - 000000000000ffff [ 0.070395] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.070398] reserve RAM buffer: 000000003dff0000 - 000000003fffffff [ 0.070515] NetLabel: Initializing [ 0.070517] NetLabel: domain hash size = 128 [ 0.070519] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.070534] NetLabel: unlabeled traffic allowed by default [ 0.070576] Switching to clocksource tsc [ 0.080806] AppArmor: AppArmor Filesystem Enabled [ 0.080836] pnp: PnP ACPI init [ 0.080876] ACPI: bus type pnp registered [ 0.098036] ERROR: Unable to locate IOAPIC for GSI 12 [ 0.098088] ERROR: Unable to locate IOAPIC for GSI 1 [ 0.098132] ERROR: Unable to locate IOAPIC for GSI 8 [ 0.098416] ERROR: Unable to locate IOAPIC for GSI 13 [ 0.098526] pnp: PnP ACPI: found 10 devices [ 0.098529] ACPI: ACPI bus type pnp unregistered [ 0.098534] PnPBIOS: Disabled by ACPI PNP [ 0.098554] system 00:05: [mem 0xfff80000-0xffffffff] has been reserved [ 0.098561] system 00:07: [io 0x0680-0x06ff] has been reserved [ 0.098564] system 00:07: [io 0x0200-0x020f] has been reserved [ 0.098568] system 00:07: [io 0x0290-0x0297] has been reserved [ 0.098571] system 00:07: [io 0x1000-0x107f] has been reserved [ 0.098575] system 00:07: [io 0x1300-0x133f] has been reserved [ 0.098578] system 00:07: [io 0x077c-0x077f] has been reserved [ 0.135007] pci 0000:00:02.1: BAR 0: assigned [mem 0x40000000-0x47ffffff pref] [ 0.135014] pci 0000:00:02.1: BAR 0: set to [mem 0x40000000-0x47ffffff pref] (PCI address [0x40000000-0x47ffffff] [ 0.135018] pci 0000:00:02.1: BAR 1: assigned [mem 0x48000000-0x4807ffff] [ 0.135023] pci 0000:00:02.1: BAR 1: set to [mem 0x48000000-0x4807ffff] (PCI address [0x48000000-0x4807ffff] [ 0.135027] pci 0000:00:1f.1: BAR 5: assigned [mem 0x48080000-0x480803ff] [ 0.135033] pci 0000:00:1f.1: BAR 5: set to [mem 0x48080000-0x480803ff] (PCI address [0x48080000-0x480803ff] [ 0.135038] pci 0000:01:03.0: BAR 15: assigned [mem 0xa0000000-0xa3ffffff pref] [ 0.135042] pci 0000:01:03.0: BAR 16: assigned [mem 0xe4000000-0xe7ffffff] [ 0.135045] pci 0000:01:03.0: BAR 0: assigned [mem 0xe0002000-0xe0002fff] [ 0.135051] pci 0000:01:03.0: BAR 0: set to [mem 0xe0002000-0xe0002fff] (PCI address [0xe0002000-0xe0002fff] [ 0.135055] pci 0000:01:03.0: BAR 13: assigned [io 0xc400-0xc4ff] [ 0.135058] pci 0000:01:03.0: BAR 14: assigned [io 0xc800-0xc8ff] [ 0.135062] pci 0000:01:03.0: CardBus bridge to [bus 02-05] [ 0.135065] pci 0000:01:03.0: bridge window [io 0xc400-0xc4ff] [ 0.135070] pci 0000:01:03.0: bridge window [io 0xc800-0xc8ff] [ 0.135075] pci 0000:01:03.0: bridge window [mem 0xa0000000-0xa3ffffff pref] [ 0.135080] pci 0000:01:03.0: bridge window [mem 0xe4000000-0xe7ffffff] [ 0.135086] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 0.135090] pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff] [ 0.135096] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xefffffff] [ 0.135101] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xafffffff pref] [ 0.135118] pci 0000:00:1e.0: setting latency timer to 64 [ 0.135333] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.135337] PCI: setting IRQ 11 as level-triggered [ 0.135343] pci 0000:01:03.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.135350] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.135353] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.135357] pci_bus 0000:01: resource 0 [io 0xc000-0xdfff] [ 0.135360] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xefffffff] [ 0.135363] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff pref] [ 0.135366] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.135369] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff] [ 0.135373] pci_bus 0000:02: resource 0 [io 0xc400-0xc4ff] [ 0.135376] pci_bus 0000:02: resource 1 [io 0xc800-0xc8ff] [ 0.135379] pci_bus 0000:02: resource 2 [mem 0xa0000000-0xa3ffffff pref] [ 0.135382] pci_bus 0000:02: resource 3 [mem 0xe4000000-0xe7ffffff] [ 0.135436] NET: Registered protocol family 2 [ 0.135521] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.135848] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.137302] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.138224] TCP: Hash tables configured (established 131072 bind 65536) [ 0.138229] TCP reno registered [ 0.138238] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.138272] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.138466] NET: Registered protocol family 1 [ 0.138500] pci 0000:00:02.0: Boot video device [ 0.138594] PCI: CLS mismatch (64 != 16), using 64 bytes [ 0.138724] Simple Boot Flag at 0x37 set to 0x1 [ 0.138854] cpufreq-nforce2: No nForce2 chipset. [ 0.138885] Scanning for low memory corruption every 60 seconds [ 0.139124] audit: initializing netlink socket (disabled) [ 0.139143] type=2000 audit(1286966222.136:1): initialized [ 0.152393] Trying to unpack rootfs image as initramfs... [ 0.169836] highmem bounce pool size: 64 pages [ 0.169844] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.177553] VFS: Disk quotas dquot_6.5.2 [ 0.177654] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.178539] fuse init (API version 7.14) [ 0.178655] msgmni has been set to 1701 [ 0.185649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.185654] io scheduler noop registered [ 0.185657] io scheduler deadline registered [ 0.185680] io scheduler cfq registered (default) [ 0.185847] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.185873] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.321624] ACPI: AC Adapter [AC] (on-line) [ 0.321743] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.321754] ACPI: Sleep Button [SBTN] [ 0.321814] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.337701] ACPI: Lid Switch [LID] [ 0.337831] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.337839] ACPI: Power Button [PWRF] [ 0.338003] ACPI: acpi_idle registered with cpuidle [ 0.338051] Marking TSC unstable due to TSC halts in idle [ 0.341465] Switching to clocksource acpi_pm [ 0.361700] ERST: Table is not found! [ 0.361938] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.362394] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.362402] serial 0000:00:1f.6: PCI INT B disabled [ 0.363809] brd: module loaded [ 0.368680] loop: module loaded [ 0.368958] ata_piix 0000:00:1f.1: version 2.13 [ 0.368973] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.369231] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.369237] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.369287] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.369451] scsi0 : ata_piix [ 0.369572] isapnp: Scanning for PnP cards... [ 0.380257] scsi1 : ata_piix [ 0.381496] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14 [ 0.381500] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15 [ 0.381976] Fixed MDIO Bus: probed [ 0.382021] PPP generic driver version 2.4.2 [ 0.382106] tun: Universal TUN/TAP device driver, 1.6 [ 0.382108] tun: (C) 1999-2004 Max Krasnyansky [ 0.382213] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.426064] ACPI: Battery Slot [BAT0] (battery absent) [ 0.604036] ata1.00: ATA-6: FUJITSU MHT2080AT, 0022, max UDMA/100 [ 0.604042] ata1.00: 156301488 sectors, multi 16: LBA [ 0.612653] ata2.01: ATAPI: TOSHIBA CD/DVDW SD-R6472, TU51, max UDMA/33 [ 0.628569] ata2.01: configured for UDMA/33 [ 0.636843] ata1.00: configured for UDMA/100 [ 0.978958] Freeing initrd memory: 14896k freed [ 1.037066] isapnp: No Plug & Play device found [ 1.037302] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080A 0022 PQ: 0 ANSI: 5 [ 1.037570] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.037798] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.037862] sd 0:0:0:0: [sda] Write Protect is off [ 1.037866] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.037894] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.038085] sda: [ 1.051170] scsi 1:0:1:0: CD-ROM TOSHIBA CD/DVDW SD-R6472 TU51 PQ: 0 ANSI: 5 [ 1.057575] sda1 sda2 [ 1.085577] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.380224] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 [ 1.380229] PCI: setting IRQ 10 as level-triggered [ 1.380235] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 1.380262] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.380266] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.380321] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.380356] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.384229] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.384243] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xfebff000 [ 1.400035] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.400210] hub 1-0:1.0: USB hub found [ 1.400216] hub 1-0:1.0: 4 ports detected [ 1.400303] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.400325] uhci_hcd: USB Universal Host Controller Interface driver [ 1.400556] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 7 [ 1.400559] PCI: setting IRQ 7 as level-triggered [ 1.400564] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 7 (level, low) -> IRQ 7 [ 1.400572] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.400576] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.400625] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.400649] uhci_hcd 0000:00:1d.0: irq 7, io base 0x00001200 [ 1.400801] hub 2-0:1.0: USB hub found [ 1.400806] hub 2-0:1.0: 2 ports detected [ 1.800159] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.800163] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.800170] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.800174] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.800215] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.800238] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001600 [ 1.800383] hub 3-0:1.0: USB hub found [ 1.800388] hub 3-0:1.0: 2 ports detected [ 1.800445] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 1.800452] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.800456] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.800494] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.800514] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001700 [ 1.800661] hub 4-0:1.0: USB hub found [ 1.800666] hub 4-0:1.0: 2 ports detected [ 1.800802] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.810173] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.814339] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.814347] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.814379] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.814405] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.814432] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.814562] mice: PS/2 mouse device common for all mice [ 1.814740] rtc_cmos 00:03: RTC can wake from S4 [ 1.814791] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.814809] rtc0: alarms up to one month, 242 bytes nvram [ 1.814969] device-mapper: uevent: version 1.0.3 [ 1.815128] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 1.815191] device-mapper: multipath: version 1.1.1 loaded [ 1.815194] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.815364] EISA: Probing bus 0 at eisa.0 [ 1.815382] Cannot allocate resource for EISA slot 1 [ 1.815409] EISA: Detected 0 cards. [ 1.815507] cpuidle: using governor ladder [ 1.815571] cpuidle: using governor menu [ 1.815962] TCP cubic registered [ 1.816184] NET: Registered protocol family 10 [ 1.816647] lo: Disabled Privacy Extensions [ 1.816938] NET: Registered protocol family 17 [ 1.818308] Using IPI No-Shortcut mode [ 1.818400] PM: Resume from disk failed. [ 1.818415] registered taskstats version 1 [ 1.818615] Magic number: 14:640:628 [ 1.818719] rtc_cmos 00:03: setting system clock to 2010-10-13 10:37:04 UTC (1286966224) [ 1.818723] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.818725] EDD information not available. [ 1.818836] Freeing unused kernel memory: 684k freed [ 1.819350] Write protecting the kernel text: 4932k [ 1.819395] Write protecting the kernel read-only data: 1976k [ 1.823239] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.840363] udev[71]: starting version 163 [ 1.896056] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 2.080352] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 2.080934] acpi device:03: registered as cooling_device1 [ 2.081282] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input4 [ 2.081379] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.087726] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 2.087970] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 3 [ 2.087973] PCI: setting IRQ 3 as level-triggered [ 2.087979] via-rhine 0000:01:02.0: PCI INT A -> Link[LNKE] -> GSI 3 (level, low) -> IRQ 3 [ 2.087987] via-rhine 0000:01:02.0: setting latency timer to 64 [ 2.096434] Linux agpgart interface v0.103 [ 2.118868] eth0: VIA Rhine III at 0xe0000000, 00:40:d0:69:cc:a9, IRQ 3. [ 2.119583] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1. [ 2.128140] agpgart-intel 0000:00:00.0: Intel 855GM Chipset [ 2.129088] agpgart-intel 0000:00:00.0: detected 32636K stolen memory [ 2.131039] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xb0000000 [ 2.192443] usbcore: registered new interface driver hiddev [ 2.193024] [drm] Initialized drm 1.1.0 20060810 [ 2.208357] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5 [ 2.208633] generic-usb 0003:046D:C01B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0 [ 2.208851] usbcore: registered new interface driver usbhid [ 2.208854] usbhid: USB HID core driver [ 2.246836] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 7 (level, low) -> IRQ 7 [ 2.246844] i915 0000:00:02.0: setting latency timer to 64 [ 2.251247] [drm] set up 31M of stolen space [ 2.269289] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 2.269902] [drm] initialized overlay support [ 3.528497] Console: switching to colour frame buffer device 128x48 [ 3.532795] fb0: inteldrmfb frame buffer device [ 3.532797] drm: registered panic notifier [ 3.532810] Slow work thread pool: Starting up [ 3.532868] Slow work thread pool: Ready [ 3.532878] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.860392] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 30.900040] udev[333]: starting version 163 [ 30.960389] Adding 2915760k swap on /dev/sda5. Priority:-1 extents:1 across:2915760k [ 31.135211] intel_rng: Firmware space is locked read-only. If you can't or [ 31.135213] intel_rng: don't want to disable this in firmware setup, and if [ 31.135215] intel_rng: you are certain that your system has a functional [ 31.135216] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 31.205290] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 31.314823] lib80211: common routines for IEEE802.11 drivers [ 31.314827] lib80211_crypt: registered algorithm 'NULL' [ 31.397851] lp: driver loaded but no devices found [ 31.555305] yenta_cardbus 0000:01:03.0: CardBus bridge found [1071:8089] [ 31.555323] yenta_cardbus 0000:01:03.0: Enabling burst memory read transactions [ 31.555329] yenta_cardbus 0000:01:03.0: Using CSCINT to route CSC interrupts to PCI [ 31.555333] yenta_cardbus 0000:01:03.0: Routing CardBus interrupts to PCI [ 31.555339] yenta_cardbus 0000:01:03.0: TI: mfunc 0x01111c02, devctl 0x64 [ 31.573645] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 31.655157] cfg80211: Calling CRDA to update world regulatory domain [ 31.677731] type=1400 audit(1286966254.355:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=572 comm="apparmor_parser" [ 31.678466] type=1400 audit(1286966254.355:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=572 comm="apparmor_parser" [ 31.678874] type=1400 audit(1286966254.355:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=572 comm="apparmor_parser" [ 31.701216] type=1400 audit(1286966254.379:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=596 comm="apparmor_parser" [ 31.737004] cfg80211: World regulatory domain updated: [ 31.737010] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 31.737014] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.737017] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 31.737021] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 31.737024] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.737027] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.737283] libipw: 802.11 data/management/control stack, git-1.1.13 [ 31.737286] libipw: Copyright (C) 2004-2005 Intel Corporation [ 31.784799] yenta_cardbus 0000:01:03.0: ISA IRQ mask 0x0070, PCI irq 11 [ 31.784804] yenta_cardbus 0000:01:03.0: Socket status: 30000006 [ 31.784810] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05 [ 31.784824] yenta_cardbus 0000:01:03.0: pcmcia: parent PCI bridge window: [io 0xc000-0xdfff] [ 31.784828] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xdfff: excluding 0xc000-0xc0ff 0xc400-0xc4ff 0xc800-0xc8ff [ 31.789390] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 31.789393] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 31.818432] [ 31.818441] yenta_cardbus 0000:01:03.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xefffffff] [ 31.818448] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xefffffff: excluding 0xe0000000-0xe07fffff 0xe4000000-0xe7ffffff [ 31.818473] yenta_cardbus 0000:01:03.0: pcmcia: parent PCI bridge window: [mem 0xa0000000-0xafffffff pref] [ 31.818477] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xafffffff: excluding 0xa0000000-0xafffffff [ 31.829822] ipw2200 0000:01:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 31.844130] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 32.023511] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 32.023542] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 32.096332] ipw2200: Radio Frequency Kill Switch is On: [ 32.096334] Kill switch must be turned off for wireless networking to work. [ 32.096899] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x20f 0x290-0x297 0x370-0x377 [ 32.098485] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7 [ 32.099192] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 32.099780] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 32.101421] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xe0000-0xfffff [ 32.101487] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff [ 32.101550] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean. [ 32.101619] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 32.132357] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) [ 32.454672] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x254ab1, caps: 0x804713/0x0/0x0 [ 32.525047] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input6 [ 32.619082] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 32.646747] type=1400 audit(1286966255.323:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=857 comm="apparmor_parser" [ 32.654459] type=1400 audit(1286966255.331:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=859 comm="apparmor_parser" [ 32.655198] type=1400 audit(1286966255.331:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=859 comm="apparmor_parser" [ 32.655603] type=1400 audit(1286966255.331:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=859 comm="apparmor_parser" [ 32.688248] type=1400 audit(1286966255.367:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=864 comm="apparmor_parser" [ 32.711130] type=1400 audit(1286966255.387:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=864 comm="apparmor_parser" [ 32.848295] intel8x0_measure_ac97_clock: measured 55676 usecs (2683 samples) [ 32.848300] intel8x0: clocking to 48000 [ 33.294619] ppdev: user-space parallel port driver