[ 55.632] X.Org X Server 1.9.0 Release Date: 2010-08-20 [ 55.632] X Protocol Version 11, Revision 0 [ 55.632] Build Operating System: Linux 2.6.24-27-server x86_64 Ubuntu [ 55.632] Current Operating System: Linux silver 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 x86_64 [ 55.632] Kernel command line: root=UUID=1fdf1f18-3ca9-447c-a9b5-9b40d4c276bd ro resume=/dev/sda4 resume2=/dev/sda4 quiet splash [ 55.632] Build Date: 16 September 2010 06:18:41PM [ 55.632] xorg-server 2:1.9.0-0ubuntu7 (For technical support please see http://www.ubuntu.com/support) [ 55.632] Current version of pixman: 0.18.4 [ 55.632] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 55.632] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 55.633] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 29 20:37:13 2010 [ 55.703] (==) Using config file: "/etc/X11/xorg.conf" [ 55.703] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 55.887] (==) ServerLayout "Default Layout" [ 55.887] (**) |-->Screen "Default Screen" (0) [ 55.887] (**) | |-->Monitor "Generic Monitor" [ 55.932] (**) | |-->Device "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller" [ 55.932] (==) Automatically adding devices [ 55.932] (==) Automatically enabling devices [ 55.962] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 55.962] Entry deleted from font path. [ 56.036] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 56.036] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 56.036] (**) Extension "Composite" is enabled [ 56.036] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 56.036] (II) Loader magic: 0x7d0200 [ 56.036] (II) Module ABI versions: [ 56.037] X.Org ANSI C Emulation: 0.4 [ 56.037] X.Org Video Driver: 8.0 [ 56.037] X.Org XInput driver : 11.0 [ 56.037] X.Org Server Extension : 4.0 [ 56.039] (--) PCI:*(0:0:2:0) 8086:2a02:17aa:383e rev 12, Mem @ 0xfc000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8 [ 56.039] (--) PCI: (0:0:2:1) 8086:2a03:17aa:383e rev 12, Mem @ 0xfc100000/1048576 [ 56.039] (II) Open ACPI successful (/var/run/acpid.socket) [ 56.039] (II) "extmod" will be loaded by default. [ 56.039] (II) "dbe" will be loaded by default. [ 56.039] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 56.039] (II) "record" will be loaded by default. [ 56.039] (II) "dri" will be loaded. This was enabled by default and also specified in the config file. [ 56.039] (II) "dri2" will be loaded by default. [ 56.039] (II) LoadModule: "dri" [ 56.405] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 56.712] (II) Module dri: vendor="X.Org Foundation" [ 56.712] compiled for 1.9.0, module version = 1.0.0 [ 56.712] ABI class: X.Org Server Extension, version 4.0 [ 56.712] (II) Loading extension XFree86-DRI [ 56.712] (II) LoadModule: "glx" [ 56.712] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 56.735] (II) Module glx: vendor="X.Org Foundation" [ 56.735] compiled for 1.9.0, module version = 1.0.0 [ 56.735] ABI class: X.Org Server Extension, version 4.0 [ 56.735] (==) AIGLX enabled [ 56.735] (II) Loading extension GLX [ 56.736] (II) LoadModule: "extmod" [ 56.776] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 56.920] (II) Module extmod: vendor="X.Org Foundation" [ 56.920] compiled for 1.9.0, module version = 1.0.0 [ 56.920] Module class: X.Org Server Extension [ 56.920] ABI class: X.Org Server Extension, version 4.0 [ 56.920] (II) Loading extension MIT-SCREEN-SAVER [ 56.920] (II) Loading extension XFree86-VidModeExtension [ 56.920] (II) Loading extension XFree86-DGA [ 56.920] (II) Loading extension DPMS [ 56.920] (II) Loading extension XVideo [ 56.920] (II) Loading extension XVideo-MotionCompensation [ 56.920] (II) Loading extension X-Resource [ 56.920] (II) LoadModule: "dbe" [ 56.921] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 56.941] (II) Module dbe: vendor="X.Org Foundation" [ 56.941] compiled for 1.9.0, module version = 1.0.0 [ 56.941] Module class: X.Org Server Extension [ 56.941] ABI class: X.Org Server Extension, version 4.0 [ 56.941] (II) Loading extension DOUBLE-BUFFER [ 56.941] (II) LoadModule: "record" [ 56.942] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 56.949] (II) Module record: vendor="X.Org Foundation" [ 56.950] compiled for 1.9.0, module version = 1.13.0 [ 56.950] Module class: X.Org Server Extension [ 56.950] ABI class: X.Org Server Extension, version 4.0 [ 56.950] (II) Loading extension RECORD [ 56.950] (II) LoadModule: "dri2" [ 56.950] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 57.014] (II) Module dri2: vendor="X.Org Foundation" [ 57.014] compiled for 1.9.0, module version = 1.2.0 [ 57.014] ABI class: X.Org Server Extension, version 4.0 [ 57.014] (II) Loading extension DRI2 [ 57.014] (II) LoadModule: "intel" [ 57.014] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 57.184] (II) Module intel: vendor="X.Org Foundation" [ 57.184] compiled for 1.9.0, module version = 2.12.0 [ 57.184] Module class: X.Org Video Driver [ 57.184] ABI class: X.Org Video Driver, version 8.0 [ 57.184] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge [ 57.186] (++) using VT number 7 [ 57.189] drmOpenDevice: node name is /dev/dri/card0 [ 57.190] drmOpenDevice: open result is 9, (OK) [ 57.222] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 57.222] drmOpenDevice: node name is /dev/dri/card0 [ 57.222] drmOpenDevice: open result is 9, (OK) [ 57.222] drmOpenByBusid: drmOpenMinor returns 9 [ 57.223] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 57.223] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 57.223] (==) intel(0): RGB weight 888 [ 57.223] (==) intel(0): Default visual is TrueColor [ 57.223] (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM [ 57.223] (--) intel(0): Chipset: "965GM" [ 57.223] (==) intel(0): video overlay key set to 0x101fe [ 57.262] (II) intel(0): Output VGA1 using monitor section Generic Monitor [ 57.262] (II) intel(0): Output LVDS1 has no monitor section [ 57.262] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0 [ 57.680] (II) intel(0): Output TV1 has no monitor section [ 57.720] (II) intel(0): EDID for output VGA1 [ 57.720] (II) intel(0): EDID for output LVDS1 [ 57.720] (II) intel(0): Manufacturer: SEC Model: 3633 Serial#: 0 [ 57.720] (II) intel(0): Year: 2005 Week: 0 [ 57.720] (II) intel(0): EDID Version: 1.3 [ 57.720] (II) intel(0): Digital Display Input [ 57.720] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21 [ 57.720] (II) intel(0): Gamma: 2.20 [ 57.720] (II) intel(0): No DPMS capabilities specified [ 57.720] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 57.720] (II) intel(0): First detailed timing is preferred mode [ 57.720] (II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550 [ 57.720] (II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329 [ 57.720] (II) intel(0): Manufacturer's mask: 0 [ 57.720] (II) intel(0): Supported detailed timing: [ 57.720] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm [ 57.720] (II) intel(0): h_active: 1280 h_sync: 1296 h_sync_end 1344 h_blank_end 1408 h_border: 0 [ 57.720] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0 [ 57.720] (II) intel(0): Unknown vendor-specific block f [ 57.721] (II) intel(0): SAMSUNG [ 57.721] (II) intel(0): LTN154X3-L06 [ 57.721] (II) intel(0): EDID (in hex): [ 57.721] (II) intel(0): 00ffffffffffff004ca3333600000000 [ 57.721] (II) intel(0): 000f0103802115780a87f594574f8c27 [ 57.721] (II) intel(0): 27505400000001010101010101010101 [ 57.721] (II) intel(0): 010101010101ee1a0080502010301030 [ 57.721] (II) intel(0): 13004bcf100000190000000f00000000 [ 57.721] (II) intel(0): 00000000002387026402000000fe0053 [ 57.721] (II) intel(0): 414d53554e470a2020202020000000fe [ 57.721] (II) intel(0): 004c544e31353458332d4c30360a0070 [ 57.721] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 57.721] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 57.721] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 57.721] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 57.721] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 57.721] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 57.721] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 57.721] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 57.721] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 57.721] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 57.721] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 57.721] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 57.722] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 57.722] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 57.722] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 57.722] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 57.722] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 57.722] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 57.722] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 57.722] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 57.722] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 57.722] (II) intel(0): Printing probed modes for output LVDS1 [ 57.722] (II) intel(0): Modeline "1280x800"x60.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 57.722] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 57.722] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 57.722] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 57.722] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 58.140] (II) intel(0): EDID for output TV1 [ 58.140] (II) intel(0): Output VGA1 disconnected [ 58.140] (II) intel(0): Output LVDS1 connected [ 58.140] (II) intel(0): Output TV1 disconnected [ 58.140] (II) intel(0): Using exact sizes for initial modes [ 58.140] (II) intel(0): Output LVDS1 using initial mode 1280x800 [ 58.140] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 58.140] (II) intel(0): Kernel page flipping support detected, but forcibly disabled. [ 58.140] (==) intel(0): DPI set to (96, 96) [ 58.140] (II) Loading sub module "fb" [ 58.140] (II) LoadModule: "fb" [ 58.552] (II) Loading /usr/lib/xorg/modules/libfb.so [ 58.602] (II) Module fb: vendor="X.Org Foundation" [ 58.602] compiled for 1.9.0, module version = 1.0.0 [ 58.602] ABI class: X.Org ANSI C Emulation, version 0.4 [ 58.602] (==) Depth 24 pixmap format is 32 bpp [ 58.602] (II) intel(0): [DRI2] Setup complete [ 58.602] (II) intel(0): [DRI2] DRI driver: i965 [ 58.602] (**) intel(0): Tiling enabled [ 58.602] (**) intel(0): SwapBuffers wait enabled [ 58.602] (==) intel(0): VideoRam: 262144 KB [ 58.602] (II) intel(0): Allocated new frame buffer 2048x2048 stride 8192, tiled [ 58.781] (II) UXA(0): Driver registered support for the following operations: [ 58.781] (II) solid [ 58.781] (II) copy [ 58.781] (II) composite (RENDER acceleration) [ 58.781] (II) put_image [ 58.781] (II) get_image [ 58.781] (==) intel(0): Backing store disabled [ 58.781] (==) intel(0): Silken mouse enabled [ 58.789] (II) intel(0): Initializing HW Cursor [ 58.862] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 58.869] (**) intel(0): DPMS enabled [ 58.869] (==) intel(0): Intel XvMC decoder enabled [ 58.869] (II) intel(0): Set up textured video [ 58.869] (II) intel(0): Set up overlay video [ 58.870] (II) intel(0): [XvMC] i965_xvmc driver initialized. [ 58.870] (II) intel(0): direct rendering: DRI2 Enabled [ 58.870] (--) RandR disabled [ 58.870] (II) Initializing built-in extension Generic Event Extension [ 58.870] (II) Initializing built-in extension SHAPE [ 58.870] (II) Initializing built-in extension MIT-SHM [ 58.870] (II) Initializing built-in extension XInputExtension [ 58.870] (II) Initializing built-in extension XTEST [ 58.870] (II) Initializing built-in extension BIG-REQUESTS [ 58.870] (II) Initializing built-in extension SYNC [ 58.870] (II) Initializing built-in extension XKEYBOARD [ 58.870] (II) Initializing built-in extension XC-MISC [ 58.870] (II) Initializing built-in extension SECURITY [ 58.870] (II) Initializing built-in extension XINERAMA [ 58.870] (II) Initializing built-in extension XFIXES [ 58.870] (II) Initializing built-in extension RENDER [ 58.870] (II) Initializing built-in extension RANDR [ 58.870] (II) Initializing built-in extension COMPOSITE [ 58.870] (II) Initializing built-in extension DAMAGE [ 58.870] (II) Initializing built-in extension GESTURE [ 59.813] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 59.813] (II) AIGLX: enabled GLX_INTEL_swap_event [ 59.814] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 59.814] (II) AIGLX: enabled GLX_SGI_make_current_read [ 59.814] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 59.814] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so [ 59.814] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 59.814] (II) intel(0): Setting screen physical size to 338 x 211 [ 59.815] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled [ 61.461] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 62.089] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 62.089] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 62.089] (II) LoadModule: "evdev" [ 62.259] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 62.470] (II) Module evdev: vendor="X.Org Foundation" [ 62.470] compiled for 1.9.0, module version = 2.3.2 [ 62.470] Module class: X.Org XInput Driver [ 62.470] ABI class: X.Org XInput driver, version 11.0 [ 62.470] (**) Power Button: always reports core events [ 62.470] (**) Power Button: Device: "/dev/input/event2" [ 62.500] (II) Power Button: Found keys [ 62.500] (II) Power Button: Configuring as keyboard [ 62.500] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 62.500] (**) Option "xkb_rules" "evdev" [ 62.500] (**) Option "xkb_model" "pc105" [ 62.500] (**) Option "xkb_layout" "gb" [ 62.504] (II) XKB: reuse xkmfile /var/lib/xkb/server-2B4266AA55228AE7D9557A18F1965DBA19850816.xkm [ 62.653] (II) config/udev: Adding input device Video Bus (/dev/input/event6) [ 62.653] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 62.653] (**) Video Bus: always reports core events [ 62.653] (**) Video Bus: Device: "/dev/input/event6" [ 62.682] (II) Video Bus: Found keys [ 62.682] (II) Video Bus: Configuring as keyboard [ 62.682] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD) [ 62.682] (**) Option "xkb_rules" "evdev" [ 62.682] (**) Option "xkb_model" "pc105" [ 62.682] (**) Option "xkb_layout" "gb" [ 62.687] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 62.687] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 62.687] (**) Power Button: always reports core events [ 62.687] (**) Power Button: Device: "/dev/input/event1" [ 62.712] (II) Power Button: Found keys [ 62.712] (II) Power Button: Configuring as keyboard [ 62.712] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 62.712] (**) Option "xkb_rules" "evdev" [ 62.712] (**) Option "xkb_model" "pc105" [ 62.712] (**) Option "xkb_layout" "gb" [ 62.713] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 62.713] (II) No input driver/identifier specified (ignoring) [ 62.716] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event5) [ 62.716] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall" [ 62.716] (**) USB 2.0 Camera: always reports core events [ 62.716] (**) USB 2.0 Camera: Device: "/dev/input/event5" [ 62.730] (II) USB 2.0 Camera: Found keys [ 62.730] (II) USB 2.0 Camera: Configuring as keyboard [ 62.730] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD) [ 62.730] (**) Option "xkb_rules" "evdev" [ 62.730] (**) Option "xkb_model" "pc105" [ 62.730] (**) Option "xkb_layout" "gb" [ 62.739] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 62.739] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 62.739] (**) AT Translated Set 2 keyboard: always reports core events [ 62.739] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 62.750] (II) AT Translated Set 2 keyboard: Found keys [ 62.750] (II) AT Translated Set 2 keyboard: Configuring as keyboard [ 62.750] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) [ 62.750] (**) Option "xkb_rules" "evdev" [ 62.750] (**) Option "xkb_model" "pc105" [ 62.750] (**) Option "xkb_layout" "gb" [ 62.751] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event4) [ 62.751] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 62.751] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 62.751] (II) LoadModule: "synaptics" [ 62.752] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 63.067] (II) Module synaptics: vendor="X.Org Foundation" [ 63.067] compiled for 1.9.0, module version = 1.2.2 [ 63.067] Module class: X.Org XInput Driver [ 63.067] ABI class: X.Org XInput driver, version 11.0 [ 63.067] (II) Synaptics touchpad driver version 1.2.2 [ 63.067] (**) Option "Device" "/dev/input/event4" [ 63.080] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 [ 63.080] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 [ 63.080] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 63.080] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0 [ 63.080] (II) SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 63.172] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 63.172] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 63.212] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD) [ 63.212] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 63.212] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0 [ 63.212] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 63.212] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 63.302] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 63.303] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 63.303] (II) No input driver/identifier specified (ignoring) [ 68.090] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 68.090] (II) intel(0): Printing DDC gathered Modelines: [ 68.090] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 68.550] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 68.550] (II) intel(0): Printing DDC gathered Modelines: [ 68.550] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 69.070] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 69.070] (II) intel(0): Printing DDC gathered Modelines: [ 69.070] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 69.540] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 69.540] (II) intel(0): Printing DDC gathered Modelines: [ 69.540] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 75.932] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 75.932] (II) intel(0): Printing DDC gathered Modelines: [ 75.932] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 86.832] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 86.832] (II) intel(0): Printing DDC gathered Modelines: [ 86.832] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 87.320] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 87.320] (II) intel(0): Printing DDC gathered Modelines: [ 87.320] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 87.782] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 87.782] (II) intel(0): Printing DDC gathered Modelines: [ 87.782] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 88.400] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 88.400] (II) intel(0): Printing DDC gathered Modelines: [ 88.400] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 93.932] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 93.932] (II) intel(0): Printing DDC gathered Modelines: [ 93.932] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 98.692] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 98.692] (II) intel(0): Printing DDC gathered Modelines: [ 98.692] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 6946.833] (II) AIGLX: Suspending AIGLX clients for VT switch [ 7009.891] (II) Open ACPI successful (/var/run/acpid.socket) [ 7010.606] (II) AIGLX: Resuming AIGLX clients after VT switch [ 7015.856] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 7015.881] (II) intel(0): Printing DDC gathered Modelines: [ 7015.881] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 7020.760] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 7024.153] (II) Power Button: Device reopened after 1 attempts. [ 7024.262] (II) Video Bus: Device reopened after 1 attempts. [ 7024.282] (II) Power Button: Device reopened after 1 attempts. [ 7024.292] (II) USB 2.0 Camera: Device reopened after 1 attempts. [ 7024.322] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 15896.170] (II) AIGLX: Suspending AIGLX clients for VT switch [ 15942.489] (II) Open ACPI successful (/var/run/acpid.socket) [ 15942.808] (II) AIGLX: Resuming AIGLX clients after VT switch [ 15953.091] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 15953.091] (II) intel(0): Printing DDC gathered Modelines: [ 15953.091] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 15958.670] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 15958.702] (II) Power Button: Device reopened after 1 attempts. [ 15958.722] (II) Video Bus: Device reopened after 1 attempts. [ 15958.742] (II) Power Button: Device reopened after 1 attempts. [ 15958.772] (II) USB 2.0 Camera: Device reopened after 1 attempts. [ 15958.792] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 15983.246] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 15983.247] (II) intel(0): Printing DDC gathered Modelines: [ 15983.247] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 16067.498] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 16067.499] (II) intel(0): Printing DDC gathered Modelines: [ 16067.499] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 16069.508] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 16069.508] (II) intel(0): Printing DDC gathered Modelines: [ 16069.508] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 16083.339] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 16083.339] (II) intel(0): Printing DDC gathered Modelines: [ 16083.339] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 16083.909] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 16083.909] (II) intel(0): Printing DDC gathered Modelines: [ 16083.909] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 16084.739] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled [ 16665.199] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 16665.199] (II) intel(0): Printing DDC gathered Modelines: [ 16665.199] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 16750.866] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 16750.866] (II) intel(0): Printing DDC gathered Modelines: [ 16750.866] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 16875.964] (II) AIGLX: Suspending AIGLX clients for VT switch [ 16880.717] (II) Open ACPI successful (/var/run/acpid.socket) [ 16880.717] (II) AIGLX: Resuming AIGLX clients after VT switch [ 16881.490] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 16881.490] (II) intel(0): Printing DDC gathered Modelines: [ 16881.490] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 16881.572] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 16881.630] (II) Power Button: Device reopened after 1 attempts. [ 16881.670] (II) Video Bus: Device reopened after 1 attempts. [ 16881.690] (II) Power Button: Device reopened after 1 attempts. [ 16881.710] (II) USB 2.0 Camera: Device reopened after 1 attempts. [ 16881.730] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 16881.992] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 16881.992] (II) intel(0): Printing DDC gathered Modelines: [ 16881.992] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 16882.387] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled [ 16890.825] (II) config/udev: Adding input device pac7302 (/dev/input/event7) [ 16890.843] (**) pac7302: Applying InputClass "evdev keyboard catchall" [ 16890.843] (**) pac7302: always reports core events [ 16890.843] (**) pac7302: Device: "/dev/input/event7" [ 16890.870] (II) pac7302: Found keys [ 16890.870] (II) pac7302: Configuring as keyboard [ 16890.910] (II) XINPUT: Adding extended input device "pac7302" (type: KEYBOARD) [ 16890.910] (**) Option "xkb_rules" "evdev" [ 16890.910] (**) Option "xkb_model" "pc105" [ 16890.910] (**) Option "xkb_layout" "gb" [ 18172.351] (II) config/udev: removing device pac7302 [ 18172.352] (II) pac7302: Close [ 18172.352] (II) UnloadModule: "evdev" [ 18645.880] (II) AIGLX: Suspending AIGLX clients for VT switch [ 18650.961] (II) Open ACPI successful (/var/run/acpid.socket) [ 18650.961] (II) AIGLX: Resuming AIGLX clients after VT switch [ 18651.042] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 18651.042] (II) intel(0): Printing DDC gathered Modelines: [ 18651.042] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 18651.522] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 18651.600] (II) Power Button: Device reopened after 1 attempts. [ 18651.620] (II) Video Bus: Device reopened after 1 attempts. [ 18651.650] (II) Power Button: Device reopened after 1 attempts. [ 18651.680] (II) USB 2.0 Camera: Device reopened after 1 attempts. [ 18651.710] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 23098.740] (II) AIGLX: Suspending AIGLX clients for VT switch [ 23102.865] (II) Open ACPI successful (/var/run/acpid.socket) [ 23102.865] (II) AIGLX: Resuming AIGLX clients after VT switch [ 23102.939] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 23102.939] (II) intel(0): Printing DDC gathered Modelines: [ 23102.939] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 23103.410] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 23103.472] (II) Power Button: Device reopened after 1 attempts. [ 23103.492] (II) Video Bus: Device reopened after 1 attempts. [ 23103.512] (II) Power Button: Device reopened after 1 attempts. [ 23103.532] (II) USB 2.0 Camera: Device reopened after 1 attempts. [ 23103.552] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 31634.950] (II) AIGLX: Suspending AIGLX clients for VT switch [ 31683.007] (II) Open ACPI successful (/var/run/acpid.socket) [ 31683.008] (II) AIGLX: Resuming AIGLX clients after VT switch [ 31683.080] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 31683.080] (II) intel(0): Printing DDC gathered Modelines: [ 31683.080] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 31683.622] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 31683.644] (II) Power Button: Device reopened after 1 attempts. [ 31683.645] (II) Video Bus: Device reopened after 1 attempts. [ 31683.652] (II) Power Button: Device reopened after 1 attempts. [ 31683.652] (II) USB 2.0 Camera: Device reopened after 1 attempts. [ 31683.652] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 31888.863] (II) AIGLX: Suspending AIGLX clients for VT switch [ 31901.868] (II) Open ACPI successful (/var/run/acpid.socket) [ 31901.869] (II) AIGLX: Resuming AIGLX clients after VT switch [ 31901.960] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 31901.960] (II) intel(0): Printing DDC gathered Modelines: [ 31901.960] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 31902.482] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 31902.532] (II) Power Button: Device reopened after 1 attempts. [ 31902.562] (II) Video Bus: Device reopened after 1 attempts. [ 31902.592] (II) Power Button: Device reopened after 1 attempts. [ 31902.622] (II) USB 2.0 Camera: Device reopened after 1 attempts. [ 31902.652] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 34457.460] (II) AIGLX: Suspending AIGLX clients for VT switch [ 35200.668] (II) Open ACPI successful (/var/run/acpid.socket) [ 35200.669] (II) AIGLX: Resuming AIGLX clients after VT switch [ 35200.752] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 35200.752] (II) intel(0): Printing DDC gathered Modelines: [ 35200.752] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 35201.312] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 35201.352] (II) Power Button: Device reopened after 1 attempts. [ 35201.382] (II) Video Bus: Device reopened after 1 attempts. [ 35201.412] (II) Power Button: Device reopened after 1 attempts. [ 35201.452] (II) USB 2.0 Camera: Device reopened after 1 attempts. [ 35201.462] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 35261.542] (II) AIGLX: Suspending AIGLX clients for VT switch [ 35344.021] (II) Open ACPI successful (/var/run/acpid.socket) [ 35355.729] (II) AIGLX: Resuming AIGLX clients after VT switch [ 35360.975] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 35361.343] (II) intel(0): Printing DDC gathered Modelines: [ 35361.343] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 35369.700] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 35369.710] (II) Power Button: Device reopened after 1 attempts. [ 35369.746] (II) Video Bus: Device reopened after 1 attempts. [ 35369.772] (II) Power Button: Device reopened after 1 attempts. [ 35369.792] (II) USB 2.0 Camera: Device reopened after 1 attempts. [ 35369.812] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 44024.292] (II) AIGLX: Suspending AIGLX clients for VT switch [ 44071.301] (II) Open ACPI successful (/var/run/acpid.socket) [ 44071.972] (II) AIGLX: Resuming AIGLX clients after VT switch [ 44085.883] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 44086.622] (II) intel(0): Printing DDC gathered Modelines: [ 44086.622] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 44093.530] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 44099.402] (II) Power Button: Device reopened after 1 attempts. [ 44099.422] (II) Video Bus: Device reopened after 1 attempts. [ 44099.442] (II) Power Button: Device reopened after 1 attempts. [ 44099.462] (II) USB 2.0 Camera: Device reopened after 1 attempts. [ 44099.482] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 46731.842] (II) AIGLX: Suspending AIGLX clients for VT switch [ 48635.706] (II) Open ACPI successful (/var/run/acpid.socket) [ 48635.706] (II) AIGLX: Resuming AIGLX clients after VT switch [ 48635.802] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 48635.802] (II) intel(0): Printing DDC gathered Modelines: [ 48635.802] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 48636.332] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 48636.380] (II) Power Button: Device reopened after 1 attempts. [ 48636.432] (II) Video Bus: Device reopened after 1 attempts. [ 48636.462] (II) Power Button: Device reopened after 1 attempts. [ 48636.481] (II) USB 2.0 Camera: Device reopened after 1 attempts. [ 48636.482] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 48719.230] (II) AIGLX: Suspending AIGLX clients for VT switch [ 48771.550] (II) Open ACPI successful (/var/run/acpid.socket) [ 48774.894] (II) AIGLX: Resuming AIGLX clients after VT switch [ 48784.139] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 48785.368] (II) intel(0): Printing DDC gathered Modelines: [ 48785.368] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 48796.735] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 48796.742] (II) Power Button: Device reopened after 1 attempts. [ 48796.993] (II) Video Bus: Device reopened after 1 attempts. [ 48796.993] (II) Power Button: Device reopened after 1 attempts. [ 48797.000] (II) USB 2.0 Camera: Device reopened after 1 attempts. [ 48798.872] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 49065.390] (II) AIGLX: Suspending AIGLX clients for VT switch [ 49800.566] (II) Open ACPI successful (/var/run/acpid.socket) [ 49800.566] (II) AIGLX: Resuming AIGLX clients after VT switch [ 49800.645] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 49800.645] (II) intel(0): Printing DDC gathered Modelines: [ 49800.645] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 49801.162] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 49801.240] (II) Power Button: Device reopened after 1 attempts. [ 49801.260] (II) Video Bus: Device reopened after 1 attempts. [ 49801.280] (II) Power Button: Device reopened after 1 attempts. [ 49801.292] (II) USB 2.0 Camera: Device reopened after 1 attempts. [ 49801.310] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 53838.422] (II) AIGLX: Suspending AIGLX clients for VT switch [ 53919.391] (II) Open ACPI successful (/var/run/acpid.socket) [ 53919.775] (II) AIGLX: Resuming AIGLX clients after VT switch [ 53922.524] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 53923.522] (II) intel(0): Printing DDC gathered Modelines: [ 53923.522] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 53927.251] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 53927.252] (II) Power Button: Device reopened after 1 attempts. [ 53927.280] (II) Video Bus: Device reopened after 1 attempts. [ 53927.300] (II) Power Button: Device reopened after 1 attempts. [ 53927.320] (II) USB 2.0 Camera: Device reopened after 1 attempts. [ 53927.340] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 61158.072] (II) AIGLX: Suspending AIGLX clients for VT switch [ 61210.377] (II) Open ACPI successful (/var/run/acpid.socket) [ 61211.349] (II) AIGLX: Resuming AIGLX clients after VT switch [ 61215.696] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 61215.711] (II) intel(0): Printing DDC gathered Modelines: [ 61215.711] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 61223.392] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 61223.393] (II) Power Button: Device reopened after 1 attempts. [ 61223.455] (II) Video Bus: Device reopened after 1 attempts. [ 61223.455] (II) Power Button: Device reopened after 1 attempts. [ 61223.460] (II) USB 2.0 Camera: Device reopened after 1 attempts. [ 61223.460] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 64282.742] (II) AIGLX: Suspending AIGLX clients for VT switch [ 64325.806] (II) Open ACPI successful (/var/run/acpid.socket) [ 64331.291] (II) AIGLX: Resuming AIGLX clients after VT switch [ 64340.025] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 64340.061] (II) intel(0): Printing DDC gathered Modelines: [ 64340.061] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 64346.672] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 64346.692] (II) Power Button: Device reopened after 1 attempts. [ 64346.712] (II) Video Bus: Device reopened after 1 attempts. [ 64346.742] (II) Power Button: Device reopened after 1 attempts. [ 64346.762] (II) USB 2.0 Camera: Device reopened after 1 attempts. [ 64346.814] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 64848.092] (II) AIGLX: Suspending AIGLX clients for VT switch [ 64900.136] (II) Open ACPI successful (/var/run/acpid.socket) [ 64901.433] (II) AIGLX: Resuming AIGLX clients after VT switch [ 64905.147] (II) intel(0): EDID vendor "SEC", prod id 13875 [ 64905.591] (II) intel(0): Printing DDC gathered Modelines: [ 64905.591] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 64912.680] (--) SynPS/2 Synaptics TouchPad: touchpad found [ 64912.692] (II) Power Button: Device reopened after 1 attempts. [ 64913.332] (II) Video Bus: Device reopened after 1 attempts. [ 64913.340] (II) Power Button: Device reopened after 1 attempts. [ 64913.340] (II) USB 2.0 Camera: Device reopened after 1 attempts. [ 64913.370] (II) AT Translated Set 2 keyboard: Device reopened after 1 attempts. [ 66775.651] (II) Open ACPI successful (/var/run/acpid.socket) [ 66777.428] (WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused) [ 66787.040] (II) Power Button: Close [ 66792.499] (II) UnloadModule: "evdev" [ 66792.560] (II) Video Bus: Close [ 66792.627] (II) UnloadModule: "evdev" [ 66792.700] (II) Power Button: Close [ 66792.761] (II) UnloadModule: "evdev" [ 66792.896] (II) USB 2.0 Camera: Close [ 66792.896] (II) UnloadModule: "evdev" [ 66792.950] (II) AT Translated Set 2 keyboard: Close [ 66792.950] (II) UnloadModule: "evdev" [ 66793.070] (II) UnloadModule: "synaptics" [ 66793.680] ddxSigGiveUp: Closing log