[   28.548436] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[   28.607588] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[   28.607987] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.838295] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   28.838301] ===>rtllib_start_scan()
[   28.838381] =====>rtl8192_set_chan()====ch:2
[   28.838806] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   28.946635] =====>rtl8192_set_chan()====ch:3
[   29.056446] =====>rtl8192_set_chan()====ch:4
[   29.166083] =====>rtl8192_set_chan()====ch:5
[   29.266257] =====>rtl8192_set_chan()====ch:1
[   29.375558] =====>rtl8192_set_chan()====ch:2
[   29.495210] =====>rtl8192_set_chan()====ch:3
[   29.624901] =====>rtl8192_set_chan()====ch:4
[   29.744599] =====>rtl8192_set_chan()====ch:5
[   29.863013] =====>rtl8192_set_chan()====ch:6
[   29.975235] =====>rtl8192_set_chan()====ch:7
[   30.052248] Skipping EDID probe due to cached edid
[   30.083875] Skipping EDID probe due to cached edid
[   30.102391] =====>rtl8192_set_chan()====ch:8
[   30.222108] =====>rtl8192_set_chan()====ch:9
[   30.341777] =====>rtl8192_set_chan()====ch:10
[   30.461454] =====>rtl8192_set_chan()====ch:11
[   30.581149] =====>rtl8192_set_chan()====ch:12
[   30.700892] =====>rtl8192_set_chan()====ch:13
[   30.921546] Bridge firewalling registered
[   30.954587] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   30.954676] =====>rtl8192_set_chan()====ch:1
[   31.079852] =====>rtl8192_set_chan()====ch:2
[   31.199576] =====>rtl8192_set_chan()====ch:3
[   31.329257] =====>rtl8192_set_chan()====ch:4
[   31.448905] =====>rtl8192_set_chan()====ch:5
[   31.567553] =====>rtl8192_set_chan()====ch:6
[   31.689586] =====>rtl8192_set_chan()====ch:7
[   31.799278] =====>rtl8192_set_chan()====ch:8
[   31.918929] =====>rtl8192_set_chan()====ch:9
[   32.038639] =====>rtl8192_set_chan()====ch:10
[   32.168303] =====>rtl8192_set_chan()====ch:11
[   32.287987] =====>rtl8192_set_chan()====ch:12
[   32.366078] Skipping EDID probe due to cached edid
[   32.398474] Skipping EDID probe due to cached edid
[   32.407632] =====>rtl8192_set_chan()====ch:13
[   32.443855] Skipping EDID probe due to cached edid
[   32.475875] Skipping EDID probe due to cached edid
[   32.518371] Linking with attwifi,channel:1, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
[   32.518384] Linking with attwifi,channel:1, qos:1, myHT:1, networkHT:0, mode:6 cur_net.flags:0x40e
[   32.518408] ===>rtllib_associate_procedure_wq(), chan:1
[   32.518410] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   32.518413] =====>rtl8192_set_chan()====ch:1
[   32.530172] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   32.532091] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a425
[   32.532096] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a449
[   32.532099] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e431c
[   32.532103] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f321c
[   32.532107] Associated successfully
[   32.532109] normal associate
[   32.532121] Using G rates:108
[   32.532124] Successfully associated, ht not enabled(0, 0)
[   32.532128] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   32.532133] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   32.533478] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   32.745977] DHCP pkt src port:68, dest port:67!!
[   32.817007] dm_check_edca_turbo():iot peer is unknown, bssid:00:21:d8:df:61:51
[   32.842193] ip_tables: (C) 2000-2006 Netfilter Core Team
[   32.944696] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   32.945017] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   32.945019] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   32.945021] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   35.245264] Bluetooth: L2CAP ver 2.14
[   35.245268] Bluetooth: L2CAP socket layer initialized
[   35.446813] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   35.446816] Bluetooth: BNEP filters: protocol multicast
[   35.471066] Bluetooth: SCO (Voice Link) ver 0.6
[   35.471069] Bluetooth: SCO socket layer initialized
[   35.578507] Skipping EDID probe due to cached edid
[   35.742768] Bluetooth: RFCOMM TTY layer initialized
[   35.742774] Bluetooth: RFCOMM socket layer initialized
[   35.742775] Bluetooth: RFCOMM ver 1.11
[   37.699156] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=600
[   37.701417] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro,commit=600
[   43.440214] wlan0: no IPv6 routers present
[   43.541213] virbr0: no IPv6 routers present
[   44.085047] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   44.261244] Skipping EDID probe due to cached edid
[   44.279266] lo: Disabled Privacy Extensions
[   44.294390] Skipping EDID probe due to cached edid
[   44.327407] Skipping EDID probe due to cached edid
[   46.983155] Skipping EDID probe due to cached edid
[   47.018906] Skipping EDID probe due to cached edid
[   47.057313] Skipping EDID probe due to cached edid
[   47.189252] Skipping EDID probe due to cached edid
[   50.305726] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   50.371955] =====>rtl8192_set_chan()====ch:1
[   50.501555] =====>rtl8192_set_chan()====ch:2
[   50.621264] =====>rtl8192_set_chan()====ch:3
[   50.741055] =====>rtl8192_set_chan()====ch:4
[   50.860700] =====>rtl8192_set_chan()====ch:5
[   50.989066] =====>rtl8192_set_chan()====ch:6
[   51.100113] =====>rtl8192_set_chan()====ch:7
[   51.219820] =====>rtl8192_set_chan()====ch:8
[   51.349491] =====>rtl8192_set_chan()====ch:9
[   51.469239] =====>rtl8192_set_chan()====ch:10
[   51.578934] =====>rtl8192_set_chan()====ch:11
[   51.708588] =====>rtl8192_set_chan()====ch:12
[   51.818335] =====>rtl8192_set_chan()====ch:13
[   51.938054] =====>rtl8192_set_chan()====ch:1
[   51.948229] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   51.948233] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   54.641214] Skipping EDID probe due to cached edid
[   61.857406] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[   86.794972] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[  106.743415] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[  110.168966] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  110.234780] =====>rtl8192_set_chan()====ch:1
[  110.347000] =====>rtl8192_set_chan()====ch:2
[  110.466698] =====>rtl8192_set_chan()====ch:3
[  110.586459] =====>rtl8192_set_chan()====ch:4
[  110.706166] =====>rtl8192_set_chan()====ch:5
[  110.815862] =====>rtl8192_set_chan()====ch:6
[  110.935617] =====>rtl8192_set_chan()====ch:7
[  111.055312] =====>rtl8192_set_chan()====ch:8
[  111.172525] =====>rtl8192_set_chan()====ch:9
[  111.282265] =====>rtl8192_set_chan()====ch:10
[  111.401963] =====>rtl8192_set_chan()====ch:11
[  111.514184] =====>rtl8192_set_chan()====ch:12
[  111.633893] =====>rtl8192_set_chan()====ch:13
[  111.751108] =====>rtl8192_set_chan()====ch:1
[  111.761277] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  111.761283] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[  150.062656] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  150.118101] =====>rtl8192_set_chan()====ch:1
[  150.237728] =====>rtl8192_set_chan()====ch:2
[  150.357419] =====>rtl8192_set_chan()====ch:3
[  150.477166] =====>rtl8192_set_chan()====ch:4
[  150.598341] =====>rtl8192_set_chan()====ch:5
[  150.716557] =====>rtl8192_set_chan()====ch:6
[  150.835054] =====>rtl8192_set_chan()====ch:7
[  150.946027] =====>rtl8192_set_chan()====ch:8
[  151.064452] =====>rtl8192_set_chan()====ch:9
[  151.174713] =====>rtl8192_set_chan()====ch:10
[  151.295171] =====>rtl8192_set_chan()====ch:11
[  151.414836] =====>rtl8192_set_chan()====ch:12
[  151.533336] =====>rtl8192_set_chan()====ch:13
[  151.644321] =====>rtl8192_set_chan()====ch:1
[  151.654502] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  151.654509] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[  152.690464] input: 00:18:16:39:E1:36 as /devices/virtual/input/input7
[  156.620790] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[  158.091673] btusb_isoc_complete: hci0 corrupted SCO packet
[  158.091693] hci_scodata_packet: hci0 SCO packet for unknown connection handle 0
[  158.091699] hci_scodata_packet: hci0 SCO packet for unknown connection handle 0
[  158.091705] hci_scodata_packet: hci0 SCO packet for unknown connection handle 0
[  158.091709] hci_scodata_packet: hci0 SCO packet for unknown connection handle 0
[  158.091714] hci_scodata_packet: hci0 SCO packet for unknown connection handle 0
[  181.569513] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[  191.117313] device wlan0 entered promiscuous mode
[  211.505880] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[  229.868640] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  229.921944] =====>rtl8192_set_chan()====ch:1
[  230.041574] =====>rtl8192_set_chan()====ch:2
[  230.161313] =====>rtl8192_set_chan()====ch:3
[  230.281015] =====>rtl8192_set_chan()====ch:4
[  230.400721] =====>rtl8192_set_chan()====ch:5
[  230.520430] =====>rtl8192_set_chan()====ch:6
[  230.640124] =====>rtl8192_set_chan()====ch:7
[  230.759841] =====>rtl8192_set_chan()====ch:8
[  230.879539] =====>rtl8192_set_chan()====ch:9
[  230.999255] =====>rtl8192_set_chan()====ch:10
[  231.118961] =====>rtl8192_set_chan()====ch:11
[  231.238663] =====>rtl8192_set_chan()====ch:12
[  231.358369] =====>rtl8192_set_chan()====ch:13
[  231.478085] =====>rtl8192_set_chan()====ch:1
[  231.488259] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  231.488265] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[  245.442889] device wlan0 left promiscuous mode
[  254.097107] hci_scodata_packet: hci0 SCO packet for unknown connection handle 6
[  286.312094] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[  329.621283] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  329.676827] =====>rtl8192_set_chan()====ch:1
[  329.798763] =====>rtl8192_set_chan()====ch:2
[  329.924930] =====>rtl8192_set_chan()====ch:3
[  330.034622] =====>rtl8192_set_chan()====ch:4
[  330.155596] =====>rtl8192_set_chan()====ch:5
[  330.275281] =====>rtl8192_set_chan()====ch:6
[  330.393746] =====>rtl8192_set_chan()====ch:7
[  330.504744] =====>rtl8192_set_chan()====ch:8
[  330.624460] =====>rtl8192_set_chan()====ch:9
[  330.744126] =====>rtl8192_set_chan()====ch:10
[  330.862586] =====>rtl8192_set_chan()====ch:11
[  330.972343] =====>rtl8192_set_chan()====ch:12
[  331.082046] =====>rtl8192_set_chan()====ch:13
[  331.193010] =====>rtl8192_set_chan()====ch:1
[  331.203222] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  331.203228] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[  334.280533] dumpcap uses obsolete (PF_INET,SOCK_PACKET)
[  345.680732] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[  376.099029] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[  405.129080] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[  420.972096] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[  424.126181] rtl8192_hw_sleep_down(): RF Change in progress!
[  449.314766] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  449.369959] =====>rtl8192_set_chan()====ch:1
[  449.488325] =====>rtl8192_set_chan()====ch:2
[  449.598033] =====>rtl8192_set_chan()====ch:3
[  449.707747] =====>rtl8192_set_chan()====ch:4
[  449.818742] =====>rtl8192_set_chan()====ch:5
[  449.937162] =====>rtl8192_set_chan()====ch:6
[  450.046868] =====>rtl8192_set_chan()====ch:7
[  450.156609] =====>rtl8192_set_chan()====ch:8
[  450.267597] =====>rtl8192_set_chan()====ch:9
[  450.386003] =====>rtl8192_set_chan()====ch:10
[  450.496940] =====>rtl8192_set_chan()====ch:11
[  450.616661] =====>rtl8192_set_chan()====ch:12
[  450.736356] =====>rtl8192_set_chan()====ch:13
[  450.856089] =====>rtl8192_set_chan()====ch:1
[  450.866261] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  450.866269] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[  454.054612] rtl8192_hw_sleep_down(): RF Change in progress!
[  460.032646] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again
[  470.844622] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[  501.788513] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=0
[  502.458525] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro,commit=0
[  503.618273] ===>rtllib_wx_set_power(): power disable
[  504.542385] usb 1-1.4: USB disconnect, address 3
[  504.542406] btusb_intr_complete: hci0 urb ffff88011cb10900 failed to resubmit (19)
[  504.542499] btusb_bulk_complete: hci0 urb ffff88011cb10840 failed to resubmit (19)
[  504.542503] btusb_bulk_complete: hci0 urb ffff88011cb100c0 failed to resubmit (19)
[  504.542599] btusb_send_frame: hci0 urb ffff8800b654e3c0 submission failed
[  504.786915] hub 1-1:1.0: hub_port_status failed (err = -32)
[  504.786920] hub_port_connect_change: 15 callbacks suppressed
[  504.786923] hub 1-1:1.0: connect-debounce failed, port 4 disabled
[  504.849408] dis associate packet!
[  504.851339] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  505.454983] PM: Syncing filesystems ... done.
[  505.460318] PM: Preparing system for mem sleep
[  506.373097] Freezing user space processes ... (elapsed 0.01 seconds) done.
[  506.392303] Freezing remaining freezable tasks ... (elapsed 0.02 seconds) done.
[  506.412275] PM: Entering mem sleep
[  506.412436] Suspending console(s) (use no_console_suspend to debug)
[  506.412752] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  506.452866] sd 0:0:0:0: [sda] Stopping disk
[  506.531935] PM: suspend of drv:usb dev:2-1 complete after 119.504 msecs
[  506.531988] PM: suspend of drv:usb dev:usb2 complete after 101.112 msecs
[  506.621762] PM: suspend of drv:tpm_tis dev:00:0b complete after 191.007 msecs
[  506.621810] ============> r8192E suspend call.
[  506.621815] RTL819XE:UI is open out of suspend function
[  506.621818] r8192E support WOL call??????????????????????
[  506.621885] rtl819xSE 0000:02:00.0: PCI INT A disabled
[  506.621893] ACPI handle has no context!
[  506.621901] ACPI handle has no context!
[  506.621934] ehci_hcd 0000:00:1d.0: PCI INT D disabled
[  506.621937] ehci_hcd 0000:00:1a.0: PCI INT D disabled
[  506.691533] i915 0000:00:02.0: power state changed by ACPI to D3
[  506.748239] e1000e 0000:00:19.0: PCI INT A disabled
[  506.748246] e1000e 0000:00:19.0: PME# enabled
[  506.748253] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[  506.761299] PM: suspend of drv:e1000e dev:0000:00:19.0 complete after 139.724 msecs
[  506.845235] PM: suspend of drv:sd dev:0:0:0:0 complete after 433.592 msecs
[  506.845242] PM: suspend of drv:scsi dev:target0:0:0 complete after 433.584 msecs
[  506.845248] PM: suspend of drv:scsi dev:host0 complete after 433.511 msecs
[  506.943375] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 322.280 msecs
[  507.848836] HDA Intel 0000:00:1b.0: PCI INT B disabled
[  507.868539] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 1249.801 msecs
[  507.868596] PM: suspend of drv: dev:pci0000:00 complete after 1249.836 msecs
[  507.868651] PM: suspend of devices complete after 1459.761 msecs
[  507.868655] PM: suspend devices took 1.460 seconds
[  507.968356] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[  508.048168] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[  508.048255] PM: late suspend of devices complete after 180.055 msecs
[  508.147900] ACPI: Preparing to enter system sleep state S3
[  508.526988] PM: Saving platform NVS memory
[  508.547312] Disabling non-boot CPUs ...
[  508.676432] CPU 1 is now offline
[  508.796129] CPU 2 is now offline
[  508.915827] CPU 3 is now offline
[  508.915832] SMP alternatives: switching to UP code
[  508.921022] Extended CMOS year: 2000
[18446744063.054198] Back to C!
[18446744063.054204] PM: Restoring platform NVS memory
[18446744063.082464] Extended CMOS year: 2000
[18446744063.082489] Enabling non-boot CPUs ...
[18446744063.082722] SMP alternatives: switching to SMP code
[18446744063.087358] Booting Node 0 Processor 1 APIC 0x1
[18446744063.366772] CPU1 is up
[18446744063.367189] Booting Node 0 Processor 2 APIC 0x4
[18446744063.707153] CPU2 is up
[18446744063.707603] Booting Node 0 Processor 3 APIC 0x5
[18446744064.046253] CPU3 is up
[18446744064.047991] ACPI: Waking up from system sleep state S3
[18446744064.804355] agpgart-intel 0000:00:00.0: restoring config space at offset 0x1 (was 0x900006, writing 0x20900006)
[18446744064.804368] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[18446744064.804472] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[18446744064.804489] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2728000)
[18446744064.804496] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[18446744064.913947] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[18446744064.933911] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[18446744064.933919] PM: early resume of drv:ehci_hcd dev:0000:00:1a.0 complete after 129.789 msecs
[18446744064.934008] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0)
[18446744064.934019] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[18446744064.934084] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[18446744064.934131] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x4010b)
[18446744064.934141] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[18446744064.934145] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf240f240)
[18446744064.934150] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x0, writing 0x3030)
[18446744064.934158] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[18446744064.934163] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100507)
[18446744064.934205] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[18446744064.934222] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2728400)
[18446744064.934229] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[18446744064.953860] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[18446744064.973809] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[18446744064.973925] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[18446744064.973990] intel ips 0000:00:1f.6: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[18446744064.974011] intel ips 0000:00:1f.6: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[18446744064.974117] PM: early resume of devices complete after 170.250 msecs
[18446744065.037977] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[18446744065.037986] e1000e 0000:00:19.0: PME# disabled
[18446744065.038041] i915 0000:00:02.0: power state changed by ACPI to D0
[18446744065.038147] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[18446744065.038370] i915 0000:00:02.0: power state changed by ACPI to D0
[18446744065.038377] i915 0000:00:02.0: setting latency timer to 64
[18446744065.038543] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[18446744065.038718] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[18446744065.038727] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[18446744065.038732] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[18446744065.038765] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[18446744065.038771] HDA Intel 0000:00:1b.0: setting latency timer to 64
[18446744065.038812] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[18446744065.039032] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[18446744065.039199] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[18446744065.039204] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[18446744065.039210] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[18446744065.039238] pci 0000:00:1e.0: setting latency timer to 64
[18446744065.039252] ahci 0000:00:1f.2: setting latency timer to 64
[18446744065.039348] ================>r8192E resume call.
[18446744065.039355] rtl819xSE 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[18446744065.039367] RTL819XE:UI is open out of resume function
[18446744065.041425] sd 0:0:0:0: [sda] Starting disk
[18446744065.403889] ata2: SATA link down (SStatus 0 SControl 300)
[18446744065.423836] ata6: SATA link down (SStatus 0 SControl 300)
[18446744065.443787] ata5: SATA link down (SStatus 0 SControl 300)
[18446744065.740595] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[18446744065.932609] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[18446744065.932616] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[18446744065.932621] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[18446744065.936691] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[18446744065.936697] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[18446744065.936703] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[18446744065.938468] ata1.00: configured for UDMA/100
[18446744065.953938] ata1.00: configured for UDMA/100
[18446744065.953944] ata1: EH complete
[18446744065.978391] PM: resume of drv:sd dev:0:0:0:0 complete after 939.273 msecs
[18446744065.978407] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 843.995 msecs
[18446744065.978424] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 939.273 msecs
[18446744065.980962] PM: resume of devices complete after 1009.271 msecs
[18446744065.981057] PM: resume devices took 1.010 seconds
[18446744065.981074] PM: Finishing wakeup.
[18446744065.981075] Restarting tasks ... done.
[18446744066.019422] video LNXVIDEO:00: Restoring backlight state
[18446744066.021020] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[18446744066.078194] Skipping EDID probe due to cached edid
[18446744066.458966] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[18446744066.509933] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[18446744066.510407] ADDRCONF(NETDEV_UP): eth0: link is not ready
[18446744066.640116] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[18446744066.640124] ===>rtllib_start_scan()
[18446744066.640816] =====>rtl8192_set_chan()====ch:2
[18446744066.653084] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[18446744066.718674] =====>rtl8192_set_chan()====ch:1
[18446744066.830349] =====>rtl8192_set_chan()====ch:2
[18446744066.950080] =====>rtl8192_set_chan()====ch:3
[18446744067.067346] usb 1-1.4: new full speed USB device using ehci_hcd and address 4
[18446744067.069770] =====>rtl8192_set_chan()====ch:4
[18446744067.189461] =====>rtl8192_set_chan()====ch:5
[18446744067.310405] =====>rtl8192_set_chan()====ch:6
[18446744067.428894] =====>rtl8192_set_chan()====ch:7
[18446744067.548632] =====>rtl8192_set_chan()====ch:8
[18446744067.667728] =====>rtl8192_set_chan()====ch:9
[18446744067.785516] =====>rtl8192_set_chan()====ch:10
[18446744067.887690] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro,commit=600
[18446744067.906364] =====>rtl8192_set_chan()====ch:11
[18446744068.022324] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro,commit=600
[18446744068.027426] =====>rtl8192_set_chan()====ch:12
[18446744068.147173] =====>rtl8192_set_chan()====ch:13
[18446744068.286204] =====>rtl8192_set_chan()====ch:1
[18446744068.405257] =====>rtl8192_set_chan()====ch:2
[18446744068.524958] =====>rtl8192_set_chan()====ch:3
[18446744068.644665] =====>rtl8192_set_chan()====ch:4
[18446744068.764376] =====>rtl8192_set_chan()====ch:5
[18446744068.884081] =====>rtl8192_set_chan()====ch:6
[18446744069.002569] =====>rtl8192_set_chan()====ch:7
[18446744069.113558] =====>rtl8192_set_chan()====ch:8
[18446744069.233256] =====>rtl8192_set_chan()====ch:9
[18446744069.352148] =====>rtl8192_set_chan()====ch:10
[18446744069.471395] =====>rtl8192_set_chan()====ch:11
[18446744069.591106] =====>rtl8192_set_chan()====ch:12
[18446744069.710796] =====>rtl8192_set_chan()====ch:13
[18446744069.832535] Linking with attwifi,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[18446744069.832560] ===>rtllib_associate_procedure_wq(), chan:1
[18446744069.832566] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[18446744069.832571] =====>rtl8192_set_chan()====ch:1
[18446744069.843011] Linking with attwifi,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[18446744069.843036] ===>rtllib_associate_procedure_wq(), chan:1
[18446744069.843037] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[18446744069.843038] =====>rtl8192_set_chan()====ch:1
[18446744072.344809] Linking with attwifi,channel:1, qos:1, myHT:0, networkHT:0, mode:6 cur_net.flags:0x40e
[18446744072.344819] ===>rtllib_associate_procedure_wq(), chan:1
[18446744072.344823] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[18446744072.344827] =====>rtl8192_set_chan()====ch:1
[    1.128666] ===>rtllib_start_scan()
[    1.128674] =====>rtl8192_set_chan()====ch:2
[    1.229647] =====>rtl8192_set_chan()====ch:3
[    1.339396] =====>rtl8192_set_chan()====ch:4
[    1.449130] =====>rtl8192_set_chan()====ch:5
[    1.558996] =====>rtl8192_set_chan()====ch:6
[    1.668586] =====>rtl8192_set_chan()====ch:7
[    1.778296] =====>rtl8192_set_chan()====ch:8
[    1.888047] =====>rtl8192_set_chan()====ch:9
[    1.997727] =====>rtl8192_set_chan()====ch:10
[    2.106484] =====>rtl8192_set_chan()====ch:11
[    2.207246] =====>rtl8192_set_chan()====ch:12
[    2.316978] =====>rtl8192_set_chan()====ch:13
[    2.426707] =====>rtl8192_set_chan()====ch:1
[    2.536468] =====>rtl8192_set_chan()====ch:2
[    6.240250] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[    6.240367] =====>rtl8192_set_chan()====ch:1
[    6.357053] =====>rtl8192_set_chan()====ch:2
[    6.475528] =====>rtl8192_set_chan()====ch:3
[    6.595178] =====>rtl8192_set_chan()====ch:4
[    6.704943] =====>rtl8192_set_chan()====ch:5
[    6.814671] =====>rtl8192_set_chan()====ch:6
[    6.924435] =====>rtl8192_set_chan()====ch:7
[    7.034137] =====>rtl8192_set_chan()====ch:8
[    7.145071] =====>rtl8192_set_chan()====ch:9
[    7.266734] =====>rtl8192_set_chan()====ch:10
[    7.389652] =====>rtl8192_set_chan()====ch:11
[    7.502989] =====>rtl8192_set_chan()====ch:12
[    7.613976] =====>rtl8192_set_chan()====ch:13
[   12.854221] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   12.854339] =====>rtl8192_set_chan()====ch:1
[   12.970789] =====>rtl8192_set_chan()====ch:2
[   13.090519] =====>rtl8192_set_chan()====ch:3
[   13.208954] =====>rtl8192_set_chan()====ch:4
[   13.319941] =====>rtl8192_set_chan()====ch:5
[   13.439607] =====>rtl8192_set_chan()====ch:6
[   13.558069] =====>rtl8192_set_chan()====ch:7
[   13.669081] =====>rtl8192_set_chan()====ch:8
[   13.787542] =====>rtl8192_set_chan()====ch:9
[   13.897270] =====>rtl8192_set_chan()====ch:10
[   14.008252] =====>rtl8192_set_chan()====ch:11
[   14.127076] =====>rtl8192_set_chan()====ch:12
[   14.237658] =====>rtl8192_set_chan()====ch:13
[   19.477168] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   19.477295] =====>rtl8192_set_chan()====ch:1
[   19.594553] =====>rtl8192_set_chan()====ch:2
[   19.714187] =====>rtl8192_set_chan()====ch:3
[   19.832654] =====>rtl8192_set_chan()====ch:4
[   19.952404] =====>rtl8192_set_chan()====ch:5
[   20.077802] =====>rtl8192_set_chan()====ch:6
[   20.191795] =====>rtl8192_set_chan()====ch:7
[   20.311500] =====>rtl8192_set_chan()====ch:8
[   20.431205] =====>rtl8192_set_chan()====ch:9
[   20.550924] =====>rtl8192_set_chan()====ch:10
[   20.670627] =====>rtl8192_set_chan()====ch:11
[   20.790349] =====>rtl8192_set_chan()====ch:12
[   20.910069] =====>rtl8192_set_chan()====ch:13
[   26.152767] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   26.152903] =====>rtl8192_set_chan()====ch:1
[   26.266859] =====>rtl8192_set_chan()====ch:2
[   26.386596] =====>rtl8192_set_chan()====ch:3
[   26.506275] =====>rtl8192_set_chan()====ch:4
[   26.625981] =====>rtl8192_set_chan()====ch:5
[   26.745680] =====>rtl8192_set_chan()====ch:6
[   26.865416] =====>rtl8192_set_chan()====ch:7
[   26.985125] =====>rtl8192_set_chan()====ch:8
[   27.104809] =====>rtl8192_set_chan()====ch:9
[   27.224536] =====>rtl8192_set_chan()====ch:10
[   27.345735] =====>rtl8192_set_chan()====ch:11
[   27.470975] =====>rtl8192_set_chan()====ch:12
[   27.583648] =====>rtl8192_set_chan()====ch:13
[   31.096212] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[   32.817572] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   32.817700] =====>rtl8192_set_chan()====ch:1
[   32.931726] =====>rtl8192_set_chan()====ch:2
[   33.050189] =====>rtl8192_set_chan()====ch:3
[   33.159928] =====>rtl8192_set_chan()====ch:4
[   33.270928] =====>rtl8192_set_chan()====ch:5
[   33.390597] =====>rtl8192_set_chan()====ch:6
[   33.509052] =====>rtl8192_set_chan()====ch:7
[   33.620012] =====>rtl8192_set_chan()====ch:8
[   33.738504] =====>rtl8192_set_chan()====ch:9
[   33.858203] =====>rtl8192_set_chan()====ch:10
[   33.977927] =====>rtl8192_set_chan()====ch:11
[   34.097630] =====>rtl8192_set_chan()====ch:12
[   34.217316] =====>rtl8192_set_chan()====ch:13
[   36.083953] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[   39.459822] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   39.459959] =====>rtl8192_set_chan()====ch:1
[   39.574127] =====>rtl8192_set_chan()====ch:2
[   39.693883] =====>rtl8192_set_chan()====ch:3
[   39.813591] =====>rtl8192_set_chan()====ch:4
[   39.933303] =====>rtl8192_set_chan()====ch:5
[   40.053006] =====>rtl8192_set_chan()====ch:6
[   40.172736] =====>rtl8192_set_chan()====ch:7
[   40.292386] =====>rtl8192_set_chan()====ch:8
[   40.412091] =====>rtl8192_set_chan()====ch:9
[   40.531784] =====>rtl8192_set_chan()====ch:10
[   40.651523] =====>rtl8192_set_chan()====ch:11
[   40.771259] =====>rtl8192_set_chan()====ch:12
[   40.890916] =====>rtl8192_set_chan()====ch:13
[   46.133686] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   46.133863] =====>rtl8192_set_chan()====ch:1
[   46.247728] =====>rtl8192_set_chan()====ch:2
[   46.367490] =====>rtl8192_set_chan()====ch:3
[   46.487202] =====>rtl8192_set_chan()====ch:4
[   46.606901] =====>rtl8192_set_chan()====ch:5
[   46.726606] =====>rtl8192_set_chan()====ch:6
[   46.846335] =====>rtl8192_set_chan()====ch:7
[   46.966024] =====>rtl8192_set_chan()====ch:8
[   47.085823] =====>rtl8192_set_chan()====ch:9
[   47.215435] =====>rtl8192_set_chan()====ch:10
[   47.325140] =====>rtl8192_set_chan()====ch:11
[   47.454828] =====>rtl8192_set_chan()====ch:12
[   47.564518] =====>rtl8192_set_chan()====ch:13
[   52.806874] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   52.807010] =====>rtl8192_set_chan()====ch:1
[   52.921373] =====>rtl8192_set_chan()====ch:2
[   53.041065] =====>rtl8192_set_chan()====ch:3
[   53.160838] =====>rtl8192_set_chan()====ch:4
[   53.280508] =====>rtl8192_set_chan()====ch:5
[   53.400232] =====>rtl8192_set_chan()====ch:6
[   53.519888] =====>rtl8192_set_chan()====ch:7
[   53.639656] =====>rtl8192_set_chan()====ch:8
[   53.759318] =====>rtl8192_set_chan()====ch:9
[   53.878996] =====>rtl8192_set_chan()====ch:10
[   53.998705] =====>rtl8192_set_chan()====ch:11
[   54.118392] =====>rtl8192_set_chan()====ch:12
[   54.238140] =====>rtl8192_set_chan()====ch:13
[   59.477291] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[   59.477428] =====>rtl8192_set_chan()====ch:1
[   59.594946] =====>rtl8192_set_chan()====ch:2
[   59.714634] =====>rtl8192_set_chan()====ch:3
[   59.834357] =====>rtl8192_set_chan()====ch:4
[   59.954084] =====>rtl8192_set_chan()====ch:5
[   60.073771] =====>rtl8192_set_chan()====ch:6
[   60.193500] =====>rtl8192_set_chan()====ch:7
[   60.313186] =====>rtl8192_set_chan()====ch:8
[   60.432887] =====>rtl8192_set_chan()====ch:9
[   60.552612] =====>rtl8192_set_chan()====ch:10
[   60.672277] =====>rtl8192_set_chan()====ch:11
[   60.792071] =====>rtl8192_set_chan()====ch:12
[   60.911776] =====>rtl8192_set_chan()====ch:13
[   61.032487] ===>rtllib_start_scan()
[   61.032509] =====>rtl8192_set_chan()====ch:3
[   61.042757] Linking with linksys,channel:6, qos:1, myHT:0, networkHT:1, mode:10 cur_net.flags:0x40e
[   61.042887] ===>rtllib_associate_procedure_wq(), chan:6
[   61.042889] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   61.042891] =====>rtl8192_set_chan()====ch:6
[   61.060442] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[   61.065073] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:0:a42b
[   61.065077] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:1:a44f
[   61.065079] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:2:5e4322
[   61.065082] SetHwReg8192SE():HW_VAR_AC_PARAM eACI:3:2f3222
[   61.065087] Associated successfully
[   61.065088] normal associate
[   61.065099] Using G rates:108
[   61.065101] Successfully associated, ht enabled
[   61.065104] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[   61.065106] =====>rtl8192_set_chan()====ch:6
[   61.075201] ===>rtl8192se_link_change():ieee->iw_mode is 2
[   61.075207] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE
[   61.077101] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   61.161734] DHCP pkt src port:68, dest port:67!!
[   62.676149] DHCP pkt src port:68, dest port:67!!
[   64.945076] DHCP pkt src port:68, dest port:67!!
[   65.919668] ====>to send ADDBAREQ!!!!!
[   65.921581] ====>rx ADDBARSP from :00:25:9c:5f:8f:77
[   68.933816] DHCP pkt src port:68, dest port:67!!
[   71.655280] wlan0: no IPv6 routers present
[   77.920255] DHCP pkt src port:68, dest port:67!!
[   80.906886] DHCP pkt src port:68, dest port:67!!
[   86.895177] DHCP pkt src port:68, dest port:67!!
[   87.264330] DHCP pkt src port:68, dest port:67!!
[   89.884432] DHCP pkt src port:68, dest port:67!!
[   94.874569] DHCP pkt src port:68, dest port:67!!
[   99.860085] DHCP pkt src port:68, dest port:67!!
[  102.852917] DHCP pkt src port:68, dest port:67!!
[  106.048269] dis associate packet!
[  106.049599] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  108.986523] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[  108.986627] =====>rtl8192_set_chan()====ch:1
[  109.104009] =====>rtl8192_set_chan()====ch:2
[  109.222987] =====>rtl8192_set_chan()====ch:3
[  109.342754] =====>rtl8192_set_chan()====ch:4
[  109.462428] =====>rtl8192_set_chan()====ch:5
[  109.582132] =====>rtl8192_set_chan()====ch:6
[  109.701816] =====>rtl8192_set_chan()====ch:7
[  109.821516] =====>rtl8192_set_chan()====ch:8
[  109.941254] =====>rtl8192_set_chan()====ch:9
[  110.060956] =====>rtl8192_set_chan()====ch:10
[  110.180644] =====>rtl8192_set_chan()====ch:11
[  110.300406] =====>rtl8192_set_chan()====ch:12
[  110.420075] =====>rtl8192_set_chan()====ch:13
[  110.540766] alg name:WEP
[  110.857372] ===========>set_swcam():EntryNo is 0,KeyIndex is 0,KeyType is 5,is_mesh is 0
[  110.857700] Linking with dfsg-net,channel:1, qos:0, myHT:1, networkHT:0, mode:4 cur_net.flags:0x402
[  110.857739] ===>rtllib_associate_procedure_wq(), chan:1
[  110.857744] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  110.857749] =====>rtl8192_set_chan()====ch:1
[  110.868329] Linking with dfsg-net,channel:1, qos:0, myHT:1, networkHT:0, mode:4 cur_net.flags:0x402
[  110.868497] ===>rtllib_associate_procedure_wq(), chan:1
[  110.868502] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
[  110.868506] =====>rtl8192_set_chan()====ch:1
[  110.912755] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
[  110.916146] Associated successfully
[  110.916149] normal associate
[  110.916161] Using G rates:108
[  110.916163] Successfully associated, ht not enabled(0, 0)
[  110.916166] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  110.916171] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[  120.873836] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[  130.842624] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[  132.770586] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[  132.770698] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  132.835484] =====>rtl8192_set_chan()====ch:1
[  132.955068] =====>rtl8192_set_chan()====ch:2
[  133.074731] =====>rtl8192_set_chan()====ch:3
[  133.194394] =====>rtl8192_set_chan()====ch:4
[  133.314051] =====>rtl8192_set_chan()====ch:5
[  133.433640] =====>rtl8192_set_chan()====ch:6
[  133.553323] =====>rtl8192_set_chan()====ch:7
[  133.672981] =====>rtl8192_set_chan()====ch:8
[  133.792631] =====>rtl8192_set_chan()====ch:9
[  133.912356] =====>rtl8192_set_chan()====ch:10
[  134.031901] =====>rtl8192_set_chan()====ch:11
[  134.151583] =====>rtl8192_set_chan()====ch:12
[  134.271203] =====>rtl8192_set_chan()====ch:13
[  134.390902] =====>rtl8192_set_chan()====ch:1
[  134.401076] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  134.401083] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[  140.823090] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[  145.808318] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[  150.793577] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[  165.757988] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[  172.655307] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  172.708752] =====>rtl8192_set_chan()====ch:1
[  172.828373] =====>rtl8192_set_chan()====ch:2
[  172.948028] =====>rtl8192_set_chan()====ch:3
[  173.066491] =====>rtl8192_set_chan()====ch:4
[  173.176092] =====>rtl8192_set_chan()====ch:5
[  173.287018] =====>rtl8192_set_chan()====ch:6
[  173.405451] =====>rtl8192_set_chan()====ch:7
[  173.516344] =====>rtl8192_set_chan()====ch:8
[  173.634749] =====>rtl8192_set_chan()====ch:9
[  173.744422] =====>rtl8192_set_chan()====ch:10
[  173.854096] =====>rtl8192_set_chan()====ch:11
[  173.963800] =====>rtl8192_set_chan()====ch:12
[  174.083491] =====>rtl8192_set_chan()====ch:13
[  174.193163] =====>rtl8192_set_chan()====ch:1
[  174.203336] ===>rtl8192se_link_change():ieee->iw_mode is 2
[  174.203343] rtl8192_update_cap(): WLAN_CAPABILITY_SHORT_PREAMBLE
[  195.670734] intel ips 0000:00:1f.6: MCP power or thermal limit exceeded
[  202.768558] rtl8192_hw_wakeup(): RF Change in progress! schedule wake up task again
[  204.503704] input: 00:18:16:39:E1:36 as /devices/virtual/input/input8