Sep 28 12:41:34 kenny-AOA110 dhclient: DHCPREQUEST of 192.168.1.102 on wlan0 to 192.168.1.1 port 67 Sep 28 12:41:34 kenny-AOA110 dhclient: DHCPACK of 192.168.1.102 from 192.168.1.1 Sep 28 12:41:34 kenny-AOA110 dhclient: bound to 192.168.1.102 -- renewal in 34722 seconds. Sep 28 15:11:01 kenny-AOA110 kernel: [85639.267119] lo: Disabled Privacy Extensions Sep 28 19:21:56 kenny-AOA110 kernel: [100694.569071] hub 1-0:1.0: over-current change on port 1 Sep 28 19:21:56 kenny-AOA110 kernel: [100694.672115] hub 2-0:1.0: over-current change on port 1 Sep 28 19:23:07 kenny-AOA110 kernel: [100765.469958] hub 1-0:1.0: over-current change on port 1 Sep 28 19:23:07 kenny-AOA110 kernel: [100765.602724] hub 1-0:1.0: over-current change on port 1 Sep 28 19:23:07 kenny-AOA110 kernel: [100765.704157] hub 2-0:1.0: over-current change on port 1 Sep 28 19:23:08 kenny-AOA110 kernel: [100765.808122] hub 1-0:1.0: over-current change on port 1 Sep 28 19:23:08 kenny-AOA110 kernel: [100765.912140] hub 2-0:1.0: over-current change on port 1 Sep 28 19:23:08 kenny-AOA110 kernel: [100766.506719] hub 1-0:1.0: over-current change on port 1 Sep 28 19:23:12 kenny-AOA110 kernel: [100770.164233] hub 1-0:1.0: over-current change on port 1 Sep 28 19:23:12 kenny-AOA110 kernel: [100770.268102] hub 2-0:1.0: over-current change on port 1 Sep 28 19:23:14 kenny-AOA110 kernel: [100772.654732] hub 1-0:1.0: over-current change on port 1 Sep 28 19:23:27 kenny-AOA110 kernel: [100784.816128] usb 1-3: new high speed USB device using ehci_hcd and address 6 Sep 28 19:23:27 kenny-AOA110 kernel: [100784.950313] scsi5 : usb-storage 1-3:1.0 Sep 28 19:23:28 kenny-AOA110 kernel: [100785.966200] scsi 5:0:0:0: CD-ROM PIONEER DVD-RW DVR-XD09 1.02 PQ: 0 ANSI: 0 Sep 28 19:23:28 kenny-AOA110 kernel: [100786.152105] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:28 kenny-AOA110 kernel: [100786.432109] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:28 kenny-AOA110 kernel: [100786.712117] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:29 kenny-AOA110 kernel: [100786.869425] sr0: scsi3-mmc drive: 8x/8x writer dvd-ram cd/rw xa/form2 cdda tray Sep 28 19:23:29 kenny-AOA110 kernel: [100786.869443] Uniform CD-ROM driver Revision: 3.20 Sep 28 19:23:29 kenny-AOA110 kernel: [100786.870105] sr 5:0:0:0: Attached scsi CD-ROM sr0 Sep 28 19:23:29 kenny-AOA110 kernel: [100786.870600] sr 5:0:0:0: Attached scsi generic sg1 type 5 Sep 28 19:23:29 kenny-AOA110 kernel: [100787.036119] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:29 kenny-AOA110 kernel: [100787.316113] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:29 kenny-AOA110 kernel: [100787.596126] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:30 kenny-AOA110 kernel: [100787.876131] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:30 kenny-AOA110 kernel: [100788.156105] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:30 kenny-AOA110 kernel: [100788.436108] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:30 kenny-AOA110 kernel: [100788.720128] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:31 kenny-AOA110 kernel: [100789.004131] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:31 kenny-AOA110 kernel: [100789.308110] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:32 kenny-AOA110 kernel: [100790.608129] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:33 kenny-AOA110 kernel: [100790.916120] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:33 kenny-AOA110 kernel: [100791.228129] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:33 kenny-AOA110 kernel: [100791.540113] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:34 kenny-AOA110 kernel: [100791.908124] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:34 kenny-AOA110 kernel: [100792.188120] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:34 kenny-AOA110 kernel: [100792.468113] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:35 kenny-AOA110 kernel: [100792.748123] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:35 kenny-AOA110 kernel: [100793.028126] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:35 kenny-AOA110 kernel: [100793.308122] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:35 kenny-AOA110 kernel: [100793.588187] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:36 kenny-AOA110 kernel: [100793.868114] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:37 kenny-AOA110 kernel: [100794.900107] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:37 kenny-AOA110 kernel: [100795.180104] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:37 kenny-AOA110 kernel: [100795.460149] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:37 kenny-AOA110 kernel: [100795.740128] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:39 kenny-AOA110 kernel: [100796.896129] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:39 kenny-AOA110 kernel: [100797.176117] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:39 kenny-AOA110 kernel: [100797.524113] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:40 kenny-AOA110 kernel: [100797.804114] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:40 kenny-AOA110 kernel: [100798.084114] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:41 kenny-AOA110 kernel: [100798.896111] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:41 kenny-AOA110 kernel: [100799.176116] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:41 kenny-AOA110 kernel: [100799.456129] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:42 kenny-AOA110 kernel: [100799.772083] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:42 kenny-AOA110 kernel: [100800.048123] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:42 kenny-AOA110 kernel: [100800.328100] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:42 kenny-AOA110 kernel: [100800.608108] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:43 kenny-AOA110 kernel: [100800.888118] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:43 kenny-AOA110 kernel: [100801.168119] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:43 kenny-AOA110 kernel: [100801.448107] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:44 kenny-AOA110 kernel: [100801.772080] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:44 kenny-AOA110 kernel: [100802.052120] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:44 kenny-AOA110 kernel: [100802.332101] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:44 kenny-AOA110 kernel: [100802.644119] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:45 kenny-AOA110 kernel: [100802.924106] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:45 kenny-AOA110 kernel: [100803.204129] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:45 kenny-AOA110 kernel: [100803.484123] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:46 kenny-AOA110 kernel: [100803.764078] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:46 kenny-AOA110 kernel: [100804.044124] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:46 kenny-AOA110 kernel: [100804.324101] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:46 kenny-AOA110 kernel: [100804.604113] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:47 kenny-AOA110 kernel: [100804.884119] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:47 kenny-AOA110 kernel: [100805.164108] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:47 kenny-AOA110 kernel: [100805.444103] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:47 kenny-AOA110 kernel: [100805.744127] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:48 kenny-AOA110 kernel: [100806.056106] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:48 kenny-AOA110 kernel: [100806.388122] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:48 kenny-AOA110 kernel: [100806.668110] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:49 kenny-AOA110 kernel: [100806.948107] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:49 kenny-AOA110 kernel: [100807.244117] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:49 kenny-AOA110 kernel: [100807.524125] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:50 kenny-AOA110 kernel: [100807.804133] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:50 kenny-AOA110 kernel: [100808.084126] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:50 kenny-AOA110 kernel: [100808.364107] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:50 kenny-AOA110 kernel: [100808.644119] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:51 kenny-AOA110 kernel: [100808.924128] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:51 kenny-AOA110 kernel: [100809.204132] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:52 kenny-AOA110 kernel: [100809.896127] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:52 kenny-AOA110 kernel: [100810.176111] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:52 kenny-AOA110 kernel: [100810.456099] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:53 kenny-AOA110 kernel: [100810.804144] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:53 kenny-AOA110 kernel: [100811.088112] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:54 kenny-AOA110 kernel: [100811.896129] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:54 kenny-AOA110 kernel: [100812.176104] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:54 kenny-AOA110 kernel: [100812.456116] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:54 kenny-AOA110 kernel: [100812.736130] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:56 kenny-AOA110 kernel: [100813.900121] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:56 kenny-AOA110 kernel: [100814.180107] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:56 kenny-AOA110 kernel: [100814.460113] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:56 kenny-AOA110 kernel: [100814.740136] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:58 kenny-AOA110 kernel: [100815.897099] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:58 kenny-AOA110 kernel: [100816.176118] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:58 kenny-AOA110 kernel: [100816.456111] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:23:59 kenny-AOA110 kernel: [100816.840158] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:00 kenny-AOA110 kernel: [100817.897102] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:00 kenny-AOA110 kernel: [100818.208085] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:00 kenny-AOA110 kernel: [100818.488099] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:01 kenny-AOA110 kernel: [100818.900128] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:01 kenny-AOA110 kernel: [100819.180115] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:01 kenny-AOA110 kernel: [100819.460118] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:01 kenny-AOA110 kernel: [100819.740134] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:02 kenny-AOA110 kernel: [100820.020124] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:02 kenny-AOA110 kernel: [100820.300108] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:02 kenny-AOA110 kernel: [100820.580101] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:03 kenny-AOA110 kernel: [100820.840144] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:03 kenny-AOA110 kernel: [100821.108119] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:04 kenny-AOA110 kernel: [100821.880118] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:04 kenny-AOA110 kernel: [100822.140115] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:06 kenny-AOA110 kernel: [100823.884134] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:06 kenny-AOA110 kernel: [100824.144111] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:06 kenny-AOA110 kernel: [100824.404123] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:06 kenny-AOA110 kernel: [100824.664107] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:07 kenny-AOA110 kernel: [100824.924126] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:08 kenny-AOA110 kernel: [100825.881120] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:08 kenny-AOA110 kernel: [100826.140116] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:08 kenny-AOA110 kernel: [100826.408133] usb 1-3: reset high speed USB device using ehci_hcd and address 6 Sep 28 19:24:14 kenny-AOA110 kernel: [100831.820528] ISO 9660 Extensions: Microsoft Joliet Level 3 Sep 28 19:24:14 kenny-AOA110 kernel: [100831.830758] ISO 9660 Extensions: RRIP_1991A Sep 28 19:24:23 kenny-AOA110 kernel: [100841.704794] usb 1-3: USB disconnect, address 6 Sep 28 19:24:24 kenny-AOA110 kernel: [100841.776674] scsi 5:0:0:0: rejecting I/O to dead device Sep 28 19:24:24 kenny-AOA110 kernel: [100841.845096] hub 1-0:1.0: over-current change on port 2 Sep 28 19:24:24 kenny-AOA110 kernel: [100841.949116] hub 1-0:1.0: over-current change on port 3 Sep 28 19:24:24 kenny-AOA110 kernel: [100842.053136] hub 2-0:1.0: over-current change on port 2 Sep 28 19:24:24 kenny-AOA110 kernel: [100842.156145] hub 3-0:1.0: over-current change on port 1 Sep 28 19:25:08 kenny-AOA110 kernel: [100886.625417] hub 1-0:1.0: over-current change on port 2 Sep 28 19:25:08 kenny-AOA110 kernel: [100886.728108] hub 1-0:1.0: over-current change on port 3 Sep 28 19:25:10 kenny-AOA110 kernel: [100888.737845] hub 1-0:1.0: over-current change on port 2 Sep 28 19:25:11 kenny-AOA110 kernel: [100888.840107] hub 1-0:1.0: over-current change on port 3 Sep 28 19:25:11 kenny-AOA110 kernel: [100888.944126] hub 1-0:1.0: over-current change on port 2 Sep 28 19:25:11 kenny-AOA110 kernel: [100889.048186] hub 2-0:1.0: over-current change on port 2 Sep 28 19:25:11 kenny-AOA110 kernel: [100889.152139] hub 3-0:1.0: over-current change on port 1 Sep 28 19:25:12 kenny-AOA110 kernel: [100890.396093] usb 1-2: new high speed USB device using ehci_hcd and address 7 Sep 28 19:25:12 kenny-AOA110 kernel: [100890.533007] scsi6 : usb-storage 1-2:1.0 Sep 28 19:25:13 kenny-AOA110 kernel: [100891.549453] scsi 6:0:0:0: CD-ROM PIONEER DVD-RW DVR-XD09 1.02 PQ: 0 ANSI: 0 Sep 28 19:25:14 kenny-AOA110 kernel: [100891.764125] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:14 kenny-AOA110 kernel: [100892.112103] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:14 kenny-AOA110 kernel: [100892.376113] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:14 kenny-AOA110 kernel: [100892.640115] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:15 kenny-AOA110 kernel: [100892.790570] sr0: scsi3-mmc drive: 8x/8x writer dvd-ram cd/rw xa/form2 cdda tray Sep 28 19:25:15 kenny-AOA110 kernel: [100892.791102] sr 6:0:0:0: Attached scsi CD-ROM sr0 Sep 28 19:25:15 kenny-AOA110 kernel: [100892.791394] sr 6:0:0:0: Attached scsi generic sg1 type 5 Sep 28 19:25:15 kenny-AOA110 kernel: [100892.984117] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:15 kenny-AOA110 kernel: [100893.264114] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:15 kenny-AOA110 kernel: [100893.612112] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:16 kenny-AOA110 kernel: [100893.892122] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:16 kenny-AOA110 kernel: [100894.172119] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:16 kenny-AOA110 kernel: [100894.556088] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:17 kenny-AOA110 kernel: [100894.832139] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:17 kenny-AOA110 kernel: [100895.144113] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:17 kenny-AOA110 kernel: [100895.424100] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:17 kenny-AOA110 kernel: [100895.708125] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:18 kenny-AOA110 kernel: [100896.108123] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:18 kenny-AOA110 kernel: [100896.388115] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:19 kenny-AOA110 kernel: [100896.752134] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:19 kenny-AOA110 kernel: [100897.032122] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:19 kenny-AOA110 kernel: [100897.476120] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:20 kenny-AOA110 kernel: [100897.788135] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:20 kenny-AOA110 kernel: [100898.068104] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:20 kenny-AOA110 kernel: [100898.380120] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:22 kenny-AOA110 kernel: [100899.900121] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:22 kenny-AOA110 kernel: [100900.180107] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:22 kenny-AOA110 kernel: [100900.460101] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:22 kenny-AOA110 kernel: [100900.740112] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:24 kenny-AOA110 kernel: [100901.896114] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:24 kenny-AOA110 kernel: [100902.156109] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:24 kenny-AOA110 kernel: [100902.420105] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:24 kenny-AOA110 kernel: [100902.684110] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:26 kenny-AOA110 kernel: [100903.884104] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:26 kenny-AOA110 kernel: [100904.144112] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:26 kenny-AOA110 kernel: [100904.404103] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:27 kenny-AOA110 kernel: [100904.880109] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:27 kenny-AOA110 kernel: [100905.148136] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:27 kenny-AOA110 kernel: [100905.424121] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:27 kenny-AOA110 kernel: [100905.728113] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:28 kenny-AOA110 kernel: [100905.992110] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:28 kenny-AOA110 kernel: [100906.268133] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:28 kenny-AOA110 kernel: [100906.530092] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:29 kenny-AOA110 kernel: [100906.796154] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:29 kenny-AOA110 kernel: [100907.056112] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:29 kenny-AOA110 kernel: [100907.316144] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:29 kenny-AOA110 kernel: [100907.600175] usb 1-2: reset high speed USB device using ehci_hcd and address 7 Sep 28 19:25:31 kenny-AOA110 kernel: [100908.838573] ISO 9660 Extensions: Microsoft Joliet Level 3 Sep 28 19:25:31 kenny-AOA110 kernel: [100908.840307] ISO 9660 Extensions: RRIP_1991A Sep 28 19:25:37 kenny-AOA110 kernel: [100915.592303] usb 1-2: USB disconnect, address 7 Sep 28 19:25:37 kenny-AOA110 kernel: [100915.648385] scsi 6:0:0:0: rejecting I/O to dead device Sep 28 19:25:37 kenny-AOA110 kernel: [100915.744113] hub 1-0:1.0: over-current change on port 3 Sep 28 19:25:38 kenny-AOA110 kernel: [100915.848139] hub 1-0:1.0: over-current change on port 2 Sep 28 19:25:38 kenny-AOA110 kernel: [100915.952351] hub 2-0:1.0: over-current change on port 2 Sep 28 19:25:38 kenny-AOA110 kernel: [100916.056128] hub 3-0:1.0: over-current change on port 1 Sep 28 19:25:44 kenny-AOA110 kernel: [100922.159367] hub 1-0:1.0: over-current change on port 2 Sep 28 19:25:44 kenny-AOA110 kernel: [100922.260106] hub 1-0:1.0: over-current change on port 3 Sep 28 19:25:48 kenny-AOA110 kernel: [100925.752135] usb 1-3: new high speed USB device using ehci_hcd and address 8 Sep 28 19:25:48 kenny-AOA110 kernel: [100925.887181] scsi7 : usb-storage 1-3:1.0 Sep 28 19:25:49 kenny-AOA110 kernel: [100926.904655] scsi 7:0:0:0: CD-ROM PIONEER DVD-RW DVR-XD09 1.02 PQ: 0 ANSI: 0 Sep 28 19:25:49 kenny-AOA110 kernel: [100927.088119] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:49 kenny-AOA110 kernel: [100927.400117] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:49 kenny-AOA110 kernel: [100927.664121] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:50 kenny-AOA110 kernel: [100927.928172] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:50 kenny-AOA110 kernel: [100928.192118] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:50 kenny-AOA110 kernel: [100928.341876] sr0: scsi3-mmc drive: 8x/8x writer dvd-ram cd/rw xa/form2 cdda tray Sep 28 19:25:50 kenny-AOA110 kernel: [100928.342570] sr 7:0:0:0: Attached scsi CD-ROM sr0 Sep 28 19:25:50 kenny-AOA110 kernel: [100928.343065] sr 7:0:0:0: Attached scsi generic sg1 type 5 Sep 28 19:25:50 kenny-AOA110 kernel: [100928.504107] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:51 kenny-AOA110 kernel: [100928.816118] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:51 kenny-AOA110 kernel: [100929.096107] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:51 kenny-AOA110 kernel: [100929.376120] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:51 kenny-AOA110 kernel: [100929.688117] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:52 kenny-AOA110 kernel: [100929.968111] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:52 kenny-AOA110 kernel: [100930.252098] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:52 kenny-AOA110 kernel: [100930.585102] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:53 kenny-AOA110 kernel: [100930.864150] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:53 kenny-AOA110 kernel: [100931.176170] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:53 kenny-AOA110 kernel: [100931.540117] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:54 kenny-AOA110 kernel: [100931.820113] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:54 kenny-AOA110 kernel: [100932.100111] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:54 kenny-AOA110 kernel: [100932.412124] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:54 kenny-AOA110 kernel: [100932.724123] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:55 kenny-AOA110 kernel: [100933.004141] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:55 kenny-AOA110 kernel: [100933.284115] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:55 kenny-AOA110 kernel: [100933.564121] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:56 kenny-AOA110 kernel: [100933.844140] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:57 kenny-AOA110 kernel: [100934.900084] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:57 kenny-AOA110 kernel: [100935.180101] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:57 kenny-AOA110 kernel: [100935.460102] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:57 kenny-AOA110 kernel: [100935.740113] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:59 kenny-AOA110 kernel: [100936.901131] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:59 kenny-AOA110 kernel: [100937.180104] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:59 kenny-AOA110 kernel: [100937.460118] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:25:59 kenny-AOA110 kernel: [100937.740105] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:26:01 kenny-AOA110 kernel: [100938.876167] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:26:01 kenny-AOA110 kernel: [100939.136099] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:26:03 kenny-AOA110 kernel: [100940.880133] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:26:03 kenny-AOA110 kernel: [100941.140111] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:26:03 kenny-AOA110 kernel: [100941.400106] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:26:03 kenny-AOA110 kernel: [100941.660113] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:26:04 kenny-AOA110 kernel: [100941.929101] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:26:04 kenny-AOA110 kernel: [100942.188129] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:26:04 kenny-AOA110 kernel: [100942.456122] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:26:04 kenny-AOA110 kernel: [100942.728099] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:26:05 kenny-AOA110 kernel: [100943.032115] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:26:05 kenny-AOA110 kernel: [100943.292107] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:26:07 kenny-AOA110 kernel: [100944.928157] usb 1-3: reset high speed USB device using ehci_hcd and address 8 Sep 28 19:26:26 kenny-AOA110 kernel: [100963.918336] usb 1-3: USB disconnect, address 8 Sep 28 19:26:29 kenny-AOA110 kernel: [100967.661090] usb 1-3: new high speed USB device using ehci_hcd and address 9 Sep 28 19:26:30 kenny-AOA110 kernel: [100967.794735] scsi8 : usb-storage 1-3:1.0 Sep 28 19:26:31 kenny-AOA110 kernel: [100968.809588] scsi 8:0:0:0: CD-ROM PIONEER DVD-RW DVR-XD09 1.02 PQ: 0 ANSI: 0 Sep 28 19:26:31 kenny-AOA110 kernel: [100968.992143] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:31 kenny-AOA110 kernel: [100969.276172] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:31 kenny-AOA110 kernel: [100969.557105] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:32 kenny-AOA110 kernel: [100969.820135] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:32 kenny-AOA110 kernel: [100970.084126] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:32 kenny-AOA110 kernel: [100970.348097] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:32 kenny-AOA110 kernel: [100970.612110] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:33 kenny-AOA110 kernel: [100970.747521] sr0: scsi3-mmc drive: 8x/8x writer dvd-ram cd/rw xa/form2 cdda tray Sep 28 19:26:33 kenny-AOA110 kernel: [100970.747904] sr 8:0:0:0: Attached scsi CD-ROM sr0 Sep 28 19:26:33 kenny-AOA110 kernel: [100970.748172] sr 8:0:0:0: Attached scsi generic sg1 type 5 Sep 28 19:26:33 kenny-AOA110 kernel: [100970.908148] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:33 kenny-AOA110 kernel: [100971.188193] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:33 kenny-AOA110 kernel: [100971.468123] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:34 kenny-AOA110 kernel: [100971.749098] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:34 kenny-AOA110 kernel: [100972.032174] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:34 kenny-AOA110 kernel: [100972.316140] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:34 kenny-AOA110 kernel: [100972.596105] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:35 kenny-AOA110 kernel: [100972.876148] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:35 kenny-AOA110 kernel: [100973.161151] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:35 kenny-AOA110 kernel: [100973.484140] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:36 kenny-AOA110 kernel: [100973.796159] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:36 kenny-AOA110 kernel: [100974.076138] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:36 kenny-AOA110 kernel: [100974.356116] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:36 kenny-AOA110 kernel: [100974.637112] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:37 kenny-AOA110 kernel: [100974.952131] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:37 kenny-AOA110 kernel: [100975.284112] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:37 kenny-AOA110 kernel: [100975.564134] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:38 kenny-AOA110 kernel: [100975.844119] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:38 kenny-AOA110 kernel: [100976.124121] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:38 kenny-AOA110 kernel: [100976.420124] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:38 kenny-AOA110 kernel: [100976.704109] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:39 kenny-AOA110 kernel: [100976.984106] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:39 kenny-AOA110 kernel: [100977.264120] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:39 kenny-AOA110 kernel: [100977.544121] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:40 kenny-AOA110 kernel: [100977.856120] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:40 kenny-AOA110 kernel: [100978.136118] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:40 kenny-AOA110 kernel: [100978.416122] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:40 kenny-AOA110 kernel: [100978.700129] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:41 kenny-AOA110 kernel: [100978.980124] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:41 kenny-AOA110 kernel: [100979.292109] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:41 kenny-AOA110 kernel: [100979.552119] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:42 kenny-AOA110 kernel: [100979.812116] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:44 kenny-AOA110 kernel: [100981.880133] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:44 kenny-AOA110 kernel: [100982.140121] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:46 kenny-AOA110 kernel: [100983.880142] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:46 kenny-AOA110 kernel: [100984.140123] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:46 kenny-AOA110 kernel: [100984.520105] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:47 kenny-AOA110 kernel: [100984.781111] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:47 kenny-AOA110 kernel: [100985.040106] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:47 kenny-AOA110 kernel: [100985.300071] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:47 kenny-AOA110 kernel: [100985.548127] usb 1-3: reset high speed USB device using ehci_hcd and address 9 Sep 28 19:26:51 kenny-AOA110 kernel: [100989.090054] ISO 9660 Extensions: Microsoft Joliet Level 3 Sep 28 19:26:51 kenny-AOA110 kernel: [100989.091786] ISO 9660 Extensions: RRIP_1991A Sep 28 19:27:30 kenny-AOA110 kernel: [101028.172440] hub 1-0:1.0: over-current change on port 2 Sep 28 19:27:30 kenny-AOA110 kernel: [101028.276106] hub 1-0:1.0: over-current change on port 3 Sep 28 19:27:30 kenny-AOA110 kernel: [101028.380115] usb 1-3: USB disconnect, address 9 Sep 28 19:27:30 kenny-AOA110 kernel: [101028.457118] scsi 8:0:0:0: rejecting I/O to dead device Sep 28 19:27:30 kenny-AOA110 kernel: [101028.530556] hub 2-0:1.0: over-current change on port 2 Sep 28 19:27:30 kenny-AOA110 kernel: [101028.636152] hub 3-0:1.0: over-current change on port 1 Sep 28 19:27:36 kenny-AOA110 kernel: [101034.448153] usb 1-1: new high speed USB device using ehci_hcd and address 10 Sep 28 19:27:36 kenny-AOA110 kernel: [101034.583437] scsi9 : usb-storage 1-1:1.0 Sep 28 19:27:37 kenny-AOA110 kernel: [101035.585148] scsi 9:0:0:0: Direct-Access Hitachi HDS721050CLA362 PQ: 0 ANSI: 2 CCS Sep 28 19:27:37 kenny-AOA110 kernel: [101035.588213] sd 9:0:0:0: Attached scsi generic sg1 type 0 Sep 28 19:27:37 kenny-AOA110 kernel: [101035.601474] sd 9:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) Sep 28 19:27:37 kenny-AOA110 kernel: [101035.602947] sd 9:0:0:0: [sdb] Write Protect is off Sep 28 19:27:37 kenny-AOA110 kernel: [101035.602971] sd 9:0:0:0: [sdb] Mode Sense: 34 00 00 00 Sep 28 19:27:37 kenny-AOA110 kernel: [101035.602987] sd 9:0:0:0: [sdb] Assuming drive cache: write through Sep 28 19:27:37 kenny-AOA110 kernel: [101035.607155] sd 9:0:0:0: [sdb] Assuming drive cache: write through Sep 28 19:27:37 kenny-AOA110 kernel: [101035.607218] sdb: sdb1 Sep 28 19:27:37 kenny-AOA110 kernel: [101035.642963] sd 9:0:0:0: [sdb] Assuming drive cache: write through Sep 28 19:27:37 kenny-AOA110 kernel: [101035.642980] sd 9:0:0:0: [sdb] Attached SCSI disk Sep 28 19:27:39 kenny-AOA110 kernel: [101037.650787] EXT4-fs warning (device sdb1): ext4_clear_journal_err: Filesystem error recorded from previous mount: IO failure Sep 28 19:27:39 kenny-AOA110 kernel: [101037.650806] EXT4-fs warning (device sdb1): ext4_clear_journal_err: Marking fs in need of filesystem check. Sep 28 19:27:39 kenny-AOA110 kernel: [101037.650845] BUG: unable to handle kernel paging request at 00f3d000 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.650859] IP: [] __percpu_counter_sum+0x2a/0x70 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.650881] *pde = 2ee59067 *pte = 00000000 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.650893] Oops: 0000 [#1] SMP Sep 28 19:27:39 kenny-AOA110 kernel: [101037.650903] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sda/sda1/uevent Sep 28 19:27:39 kenny-AOA110 kernel: [101037.650914] Modules linked in: nls_utf8 isofs snd_seq_dummy usb_storage binfmt_misc parport_pc ppdev snd_hda_codec_realtek joydev snd_hda_intel snd_hda_codec snd_hwdep snd_pcm arc4 snd_seq_midi snd_rawmidi ath5k snd_seq_midi_event i915 snd_seq mac80211 snd_timer drm_kms_helper ath snd_seq_device drm uvcvideo cfg80211 acerhdf intel_agp snd psmouse videodev jmb38x_ms v4l1_compat serio_raw i2c_algo_bit lp soundcore video memstick snd_page_alloc agpgart output parport btrfs r8169 sdhci_pci sdhci led_class mii zlib_deflate crc32c libcrc32c Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651037] Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651048] Pid: 23095, comm: mount Not tainted 2.6.35-22-generic #33-Ubuntu /AOA110 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651059] EIP: 0060:[] EFLAGS: 00010293 CPU: 1 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651070] EIP is at __percpu_counter_sum+0x2a/0x70 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651079] EAX: 00000000 EBX: 00000000 ECX: 00f3d000 EDX: 00000000 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651088] ESI: 00000000 EDI: ef3a2494 EBP: da0a7d6c ESP: da0a7d60 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651098] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651108] Process mount (pid: 23095, ti=da0a6000 task=f47d7230 task.ti=da0a6000) Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651115] Stack: Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651121] c8f27a00 0076a176 00000000 da0a7da0 c02ad8b6 d05c0400 da0a7d88 c05c6468 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651143] <0> 00000001 d05c0400 007696ba 00000000 d6a33540 c8f27a00 ef3a2800 d05c0400 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651165] <0> da0a7dd8 c02ada83 c8f27a00 c05e91b5 c0730c54 c073dd3e ef3a2800 da0a7dd8 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651190] Call Trace: Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651207] [] ? ext4_commit_super+0xd6/0x1d0 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651222] [] ? printk+0x2d/0x35 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651234] [] ? ext4_clear_journal_err+0xa3/0xd0 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651249] [] ? jbd2_journal_load+0x6c/0xd0 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651262] [] ? ext4_load_journal+0x14f/0x2e0 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651275] [] ? ext4_fill_super+0x11fd/0x1a40 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651289] [] ? vsnprintf+0xb5/0x430 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651303] [] ? get_sb_bdev+0x162/0x1a0 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651315] [] ? ext4_fill_super+0x0/0x1a40 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651328] [] ? ext4_get_sb+0x26/0x30 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651340] [] ? ext4_fill_super+0x0/0x1a40 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651352] [] ? vfs_kern_mount+0x74/0x1c0 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651365] [] ? get_fs_type+0x33/0xb0 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651377] [] ? do_kern_mount+0x3e/0xe0 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651388] [] ? do_mount+0x1dc/0x220 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651400] [] ? sys_mount+0x6b/0xa0 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651412] [] ? syscall_call+0x7/0xb Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651419] Code: 00 55 89 e5 57 89 c7 56 53 e8 f3 68 26 00 8b 5f 04 b8 ff ff ff ff 8b 77 08 eb 1c 8d b6 00 00 00 00 8b 0c 85 80 56 81 c0 8b 57 14 <8b> 14 0a 89 d1 c1 f9 1f 01 d3 11 ce 8d 48 01 a1 6c 93 5d c0 ba Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651540] EIP: [] __percpu_counter_sum+0x2a/0x70 SS:ESP 0068:da0a7d60 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651557] CR2: 0000000000f3d000 Sep 28 19:27:39 kenny-AOA110 kernel: [101037.651567] ---[ end trace 064bc9ad1eecdf4d ]--- Sep 28 19:27:43 kenny-AOA110 kernel: [101041.095887] hub 1-0:1.0: over-current change on port 2 Sep 28 19:27:43 kenny-AOA110 kernel: [101041.196111] hub 1-0:1.0: over-current change on port 3 Sep 28 19:27:43 kenny-AOA110 kernel: [101041.498936] hub 1-0:1.0: over-current change on port 2 Sep 28 19:27:43 kenny-AOA110 kernel: [101041.600097] hub 1-0:1.0: over-current change on port 3 Sep 28 19:27:43 kenny-AOA110 kernel: [101041.704118] hub 2-0:1.0: over-current change on port 2 Sep 28 19:27:44 kenny-AOA110 kernel: [101041.808174] hub 3-0:1.0: over-current change on port 1 Sep 28 19:27:44 kenny-AOA110 kernel: [101041.912156] hub 1-0:1.0: over-current change on port 2 Sep 28 19:27:44 kenny-AOA110 kernel: [101042.016134] hub 1-0:1.0: over-current change on port 3 Sep 28 19:27:47 kenny-AOA110 kernel: [101045.308115] usb 1-3: new high speed USB device using ehci_hcd and address 11 Sep 28 19:27:47 kenny-AOA110 kernel: [101045.443233] scsi10 : usb-storage 1-3:1.0 Sep 28 19:27:48 kenny-AOA110 kernel: [101046.461121] scsi 10:0:0:0: CD-ROM PIONEER DVD-RW DVR-XD09 1.02 PQ: 0 ANSI: 0 Sep 28 19:27:48 kenny-AOA110 kernel: [101046.644114] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:49 kenny-AOA110 kernel: [101046.924120] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:49 kenny-AOA110 kernel: [101047.204119] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:49 kenny-AOA110 kernel: [101047.353676] sr0: scsi3-mmc drive: 8x/8x writer dvd-ram cd/rw xa/form2 cdda tray Sep 28 19:27:49 kenny-AOA110 kernel: [101047.354368] sr 10:0:0:0: Attached scsi CD-ROM sr0 Sep 28 19:27:49 kenny-AOA110 kernel: [101047.354875] sr 10:0:0:0: Attached scsi generic sg2 type 5 Sep 28 19:27:49 kenny-AOA110 kernel: [101047.520097] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:50 kenny-AOA110 kernel: [101047.800109] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:50 kenny-AOA110 kernel: [101048.180133] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:50 kenny-AOA110 kernel: [101048.460124] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:51 kenny-AOA110 kernel: [101048.772079] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:51 kenny-AOA110 kernel: [101049.144099] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:51 kenny-AOA110 kernel: [101049.536106] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:52 kenny-AOA110 kernel: [101049.848127] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:52 kenny-AOA110 kernel: [101050.160121] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:52 kenny-AOA110 kernel: [101050.509083] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:53 kenny-AOA110 kernel: [101050.793120] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:53 kenny-AOA110 kernel: [101051.157079] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:53 kenny-AOA110 kernel: [101051.436137] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:54 kenny-AOA110 kernel: [101051.748110] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:54 kenny-AOA110 kernel: [101052.128173] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:56 kenny-AOA110 kernel: [101053.904149] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:56 kenny-AOA110 kernel: [101054.248083] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:57 kenny-AOA110 kernel: [101054.932090] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:57 kenny-AOA110 kernel: [101055.244133] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:57 kenny-AOA110 kernel: [101055.524127] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:58 kenny-AOA110 kernel: [101055.837148] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:58 kenny-AOA110 kernel: [101056.116130] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:58 kenny-AOA110 kernel: [101056.424083] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:58 kenny-AOA110 kernel: [101056.736150] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:59 kenny-AOA110 kernel: [101057.048136] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:59 kenny-AOA110 kernel: [101057.308135] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:27:59 kenny-AOA110 kernel: [101057.568123] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:28:00 kenny-AOA110 kernel: [101057.828111] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:28:00 kenny-AOA110 kernel: [101058.112130] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:28:02 kenny-AOA110 kernel: [101059.880085] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:28:02 kenny-AOA110 kernel: [101060.148165] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:28:02 kenny-AOA110 kernel: [101060.408170] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:28:04 kenny-AOA110 kernel: [101061.888140] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:28:04 kenny-AOA110 kernel: [101062.152133] usb 1-3: reset high speed USB device using ehci_hcd and address 11 Sep 28 19:28:04 kenny-AOA110 kernel: [101062.159641] hub 1-0:1.0: over-current change on port 2 Sep 28 19:28:04 kenny-AOA110 kernel: [101062.260148] hub 3-0:1.0: over-current change on port 1 Sep 28 19:28:04 kenny-AOA110 kernel: [101062.364163] hub 2-0:1.0: over-current change on port 2 Sep 28 19:28:09 kenny-AOA110 kernel: [101067.216438] usb 1-3: USB disconnect, address 11