[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #43-Ubuntu SMP Thu Sep 16 14:58:24 UTC 2010 (Ubuntu 2.6.32-24.43-generic 2.6.32.15+drm33.5) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=b951da7b-04b7-4406-a5de-7b9f92466a71 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] modified: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] modified: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007fff0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 7fff0000 @ 10000-14000 [ 0.000000] RAMDISK: 3767a000 - 37fef8b6 [ 0.000000] ACPI: RSDP 00000000000f7c80 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 000000007fff3040 00038 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000007fff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 000000007fff3180 06677 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 000000007fff0000 00040 [ 0.000000] ACPI: SSDT 000000007fff9900 000D6 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: SRAT 000000007fff9a40 00090 (v01 AMD HAMMER 00000001 AMD 00000001) [ 0.000000] ACPI: MCFG 000000007fff9b40 0003C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 000000007fff9840 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 [ 0.000000] NUMA: Allocated memnodemap from 12000 - 13040 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000 [ 0.000000] NODE_DATA [0000000000013040 - 000000000001803f] [ 0.000000] bootmap [0000000000019000 - 0000000000028fff] pages 10 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 007fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64] [ 0.000000] #3 [003767a000 - 0037fef8b6] RAMDISK ==> [003767a000 - 0037fef8b6] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0001a30000 - 0001a30159] BRK ==> [0001a30000 - 0001a30159] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000013040] MEMNODEMAP ==> [0000012000 - 0000013040] [ 0.000000] found SMP MP-table at [ffff8800000f58d0] f58d0 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fff0 [ 0.000000] On node 0 totalpages: 524159 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3825 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7112 pages used for memmap [ 0.000000] DMA32 zone: 513064 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u1048576 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516889 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=b951da7b-04b7-4406-a5de-7b9f92466a71 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 41e4000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 2047428k/2097088k available (5422k kernel code, 452k absent, 49208k reserved, 2979k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 20971520 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2010.418 MHz processor. [ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.83 BogoMIPS (lpj=20104180) [ 0.010035] Security Framework initialized [ 0.010059] AppArmor: AppArmor initialized [ 0.010280] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.020725] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.021373] Mount-cache hash table entries: 256 [ 0.021521] Initializing cgroup subsys ns [ 0.021526] Initializing cgroup subsys cpuacct [ 0.021530] Initializing cgroup subsys memory [ 0.021538] Initializing cgroup subsys devices [ 0.021541] Initializing cgroup subsys freezer [ 0.021543] Initializing cgroup subsys net_cls [ 0.021563] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.021565] CPU: L2 Cache: 512K (64 bytes/line) [ 0.021568] CPU 0/0x0 -> Node 0 [ 0.021570] tseg: 0000000000 [ 0.021588] mce: CPU supports 5 MCE banks [ 0.021600] Performance Events: AMD PMU driver. [ 0.021605] ... version: 0 [ 0.021607] ... bit width: 48 [ 0.021609] ... generic registers: 4 [ 0.021611] ... value mask: 0000ffffffffffff [ 0.021613] ... max period: 00007fffffffffff [ 0.021614] ... fixed-purpose events: 0 [ 0.021616] ... event mask: 000000000000000f [ 0.021630] SMP alternatives: switching to UP code [ 0.031281] ACPI: Core revision 20090903 [ 0.040010] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040016] ftrace: allocating 22529 entries in 89 pages [ 0.045619] Setting APIC routing to flat [ 0.045926] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.147019] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 02 [ 0.150000] Brought up 1 CPUs [ 0.150000] Total of 1 processors activated (4020.83 BogoMIPS). [ 0.150000] CPU0 attaching NULL sched-domain. [ 0.150000] devtmpfs: initialized [ 0.150000] regulator: core version 0.5 [ 0.150000] Time: 19:44:39 Date: 09/26/10 [ 0.150000] NET: Registered protocol family 16 [ 0.150000] node 0 link 0: io port [1000, fffff] [ 0.150000] TOM: 0000000080000000 aka 2048M [ 0.150000] node 0 link 0: mmio [e0000000, efffffff] [ 0.150000] node 0 link 0: mmio [feb00000, fec0ffff] [ 0.150000] node 0 link 0: mmio [a0000, bffff] [ 0.150000] node 0 link 0: mmio [80000000, fed3ffff] [ 0.150000] bus: [00,ff] on node 0 link 0 [ 0.150000] bus: 00 index 0 io port: [0, ffff] [ 0.150000] bus: 00 index 1 mmio: [80000000, fcffffffff] [ 0.150000] bus: 00 index 2 mmio: [feb00000, fec0ffff] [ 0.150000] bus: 00 index 3 mmio: [a0000, bffff] [ 0.150000] ACPI: bus type pci registered [ 0.150000] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.150000] PCI: MCFG area at e0000000 reserved in E820 [ 0.150000] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.150000] PCI: Using configuration type 1 for base access [ 0.150000] bio: create slab at 0 [ 0.150000] ACPI: EC: Look up EC in DSDT [ 0.156880] ACPI: Interpreter enabled [ 0.156886] ACPI: (supports S0 S3 S4 S5) [ 0.156910] ACPI: Using IOAPIC for interrupt routing [ 0.164985] ACPI: No dock devices found. [ 0.165093] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.165202] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.165220] pci 0000:00:01.1: reg 10 io port: [0xe000-0xe01f] [ 0.165229] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f] [ 0.165233] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f] [ 0.165244] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.165247] pci 0000:00:01.1: PME# disabled [ 0.165269] pci 0000:00:02.0: reg 10 32bit mmio: [0xc6003000-0xc6003fff] [ 0.165287] pci 0000:00:02.0: supports D1 D2 [ 0.165289] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.165292] pci 0000:00:02.0: PME# disabled [ 0.165312] pci 0000:00:02.1: reg 10 32bit mmio: [0xfeb00000-0xfeb000ff] [ 0.165334] pci 0000:00:02.1: supports D1 D2 [ 0.165336] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.165339] pci 0000:00:02.1: PME# disabled [ 0.165362] pci 0000:00:04.0: reg 10 io port: [0xd800-0xd8ff] [ 0.165366] pci 0000:00:04.0: reg 14 io port: [0xdc00-0xdcff] [ 0.165370] pci 0000:00:04.0: reg 18 32bit mmio: [0xc6002000-0xc6002fff] [ 0.165385] pci 0000:00:04.0: supports D1 D2 [ 0.165408] pci 0000:00:06.0: reg 20 io port: [0xf000-0xf00f] [ 0.165434] pci 0000:00:08.0: reg 10 io port: [0x9e0-0x9e7] [ 0.165438] pci 0000:00:08.0: reg 14 io port: [0xbe0-0xbe3] [ 0.165442] pci 0000:00:08.0: reg 18 io port: [0x960-0x967] [ 0.165446] pci 0000:00:08.0: reg 1c io port: [0xb60-0xb63] [ 0.165450] pci 0000:00:08.0: reg 20 io port: [0xd400-0xd40f] [ 0.165454] pci 0000:00:08.0: reg 24 32bit mmio: [0xc6001000-0xc6001fff] [ 0.165492] pci 0000:00:0a.0: reg 10 32bit mmio: [0xc6000000-0xc6000fff] [ 0.165496] pci 0000:00:0a.0: reg 14 io port: [0xc000-0xc007] [ 0.165513] pci 0000:00:0a.0: supports D1 D2 [ 0.165515] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.165518] pci 0000:00:0a.0: PME# disabled [ 0.165556] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.165559] pci 0000:00:0b.0: PME# disabled [ 0.165594] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.165597] pci 0000:00:0c.0: PME# disabled [ 0.165632] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.165635] pci 0000:00:0d.0: PME# disabled [ 0.165670] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.165673] pci 0000:00:0e.0: PME# disabled [ 0.165791] pci 0000:05:0b.0: reg 10 32bit mmio: [0xc5008000-0xc50087ff] [ 0.165797] pci 0000:05:0b.0: reg 14 32bit mmio: [0xc5004000-0xc5007fff] [ 0.165824] pci 0000:05:0b.0: supports D1 D2 [ 0.165826] pci 0000:05:0b.0: PME# supported from D0 D1 D2 D3hot [ 0.165830] pci 0000:05:0b.0: PME# disabled [ 0.165857] pci 0000:05:0c.0: reg 10 32bit mmio: [0xc5000000-0xc5003fff] [ 0.165863] pci 0000:05:0c.0: reg 14 io port: [0xb000-0xb0ff] [ 0.165879] pci 0000:05:0c.0: reg 30 32bit mmio pref: [0xc4000000-0xc401ffff] [ 0.165894] pci 0000:05:0c.0: supports D1 D2 [ 0.165896] pci 0000:05:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.165900] pci 0000:05:0c.0: PME# disabled [ 0.165921] pci 0000:00:09.0: transparent bridge [ 0.165924] pci 0000:00:09.0: bridge io port: [0xb000-0xbfff] [ 0.165927] pci 0000:00:09.0: bridge 32bit mmio: [0xc4000000-0xc5ffffff] [ 0.166050] pci 0000:01:00.0: reg 10 32bit mmio: [0xc2000000-0xc2ffffff] [ 0.166058] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xa0000000-0xbfffffff] [ 0.166066] pci 0000:01:00.0: reg 1c 64bit mmio: [0xc0000000-0xc1ffffff] [ 0.166071] pci 0000:01:00.0: reg 24 io port: [0xa000-0xa07f] [ 0.166076] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xc3000000-0xc301ffff] [ 0.166128] pci 0000:00:0e.0: bridge io port: [0xa000-0xafff] [ 0.166131] pci 0000:00:0e.0: bridge 32bit mmio: [0xc0000000-0xc3ffffff] [ 0.166135] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xa0000000-0xbfffffff] [ 0.166149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.166398] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.236031] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.236183] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 *12 14 15) [ 0.236334] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.236483] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.236632] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.236783] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.236937] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.237092] ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.237246] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 *7 9 10 11 12 14 15) [ 0.237395] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.237546] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.237697] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 11 *12 14 15) [ 0.237850] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.238013] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.238174] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.238335] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.238510] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 0.238679] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.238848] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.239016] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.239122] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 0.239300] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.239478] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 0.239656] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.239833] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0 [ 0.240021] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 0.240200] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.240377] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.240555] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.240742] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. [ 0.240930] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.241118] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 0.241247] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.241249] vgaarb: loaded [ 0.241364] SCSI subsystem initialized [ 0.241442] libata version 3.00 loaded. [ 0.241517] usbcore: registered new interface driver usbfs [ 0.241529] usbcore: registered new interface driver hub [ 0.241553] usbcore: registered new device driver usb [ 0.241679] ACPI: WMI: Mapper loaded [ 0.241681] PCI: Using ACPI for IRQ routing [ 0.241812] NetLabel: Initializing [ 0.241813] NetLabel: domain hash size = 128 [ 0.241815] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.241829] NetLabel: unlabeled traffic allowed by default [ 0.243615] AppArmor: AppArmor Filesystem Enabled [ 0.243634] pnp: PnP ACPI init [ 0.243654] ACPI: bus type pnp registered [ 0.247774] pnp: PnP ACPI: found 10 devices [ 0.247776] ACPI: ACPI bus type pnp unregistered [ 0.247788] system 00:01: ioport range 0x4000-0x407f has been reserved [ 0.247791] system 00:01: ioport range 0x4080-0x40ff has been reserved [ 0.247794] system 00:01: ioport range 0x4400-0x447f has been reserved [ 0.247797] system 00:01: ioport range 0x4480-0x44ff has been reserved [ 0.247803] system 00:01: ioport range 0x4800-0x487f has been reserved [ 0.247806] system 00:01: ioport range 0x4880-0x48ff has been reserved [ 0.247813] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.247815] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.247818] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.247825] system 00:08: iomem range 0xe0000000-0xefffffff has been reserved [ 0.247831] system 00:09: iomem range 0xf0000-0xf3fff could not be reserved [ 0.247834] system 00:09: iomem range 0xf4000-0xf7fff could not be reserved [ 0.247837] system 00:09: iomem range 0xf8000-0xfbfff could not be reserved [ 0.247840] system 00:09: iomem range 0xfc000-0xfffff could not be reserved [ 0.247843] system 00:09: iomem range 0x7fff0000-0x7fffffff could not be reserved [ 0.247846] system 00:09: iomem range 0xffff0000-0xffffffff has been reserved [ 0.247849] system 00:09: iomem range 0x0-0x9ffff could not be reserved [ 0.247852] system 00:09: iomem range 0x100000-0x7ffeffff could not be reserved [ 0.247855] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.247858] system 00:09: iomem range 0xfee00000-0xfeefffff has been reserved [ 0.247861] system 00:09: iomem range 0xfefff000-0xfeffffff has been reserved [ 0.247864] system 00:09: iomem range 0xfff80000-0xfff80fff has been reserved [ 0.247867] system 00:09: iomem range 0xfff90000-0xfffbffff has been reserved [ 0.247870] system 00:09: iomem range 0xfffed000-0xfffeffff has been reserved [ 0.252571] Switching to clocksource acpi_pm [ 0.252667] pci 0000:05:0c.0: BAR 6: address space collision on of device [0xc4000000-0xc401ffff] [ 0.252693] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05 [ 0.252695] pci 0000:00:09.0: IO window: 0xb000-0xbfff [ 0.252699] pci 0000:00:09.0: MEM window: 0xc4000000-0xc5ffffff [ 0.252702] pci 0000:00:09.0: PREFETCH window: 0x80000000-0x800fffff [ 0.252706] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04 [ 0.252708] pci 0000:00:0b.0: IO window: disabled [ 0.252711] pci 0000:00:0b.0: MEM window: disabled [ 0.252713] pci 0000:00:0b.0: PREFETCH window: disabled [ 0.252716] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 0.252718] pci 0000:00:0c.0: IO window: disabled [ 0.252721] pci 0000:00:0c.0: MEM window: disabled [ 0.252723] pci 0000:00:0c.0: PREFETCH window: disabled [ 0.252727] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02 [ 0.252728] pci 0000:00:0d.0: IO window: disabled [ 0.252731] pci 0000:00:0d.0: MEM window: disabled [ 0.252733] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.252737] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01 [ 0.252739] pci 0000:00:0e.0: IO window: 0xa000-0xafff [ 0.252743] pci 0000:00:0e.0: MEM window: 0xc0000000-0xc3ffffff [ 0.252746] pci 0000:00:0e.0: PREFETCH window: 0x000000a0000000-0x000000bfffffff [ 0.252754] pci 0000:00:09.0: setting latency timer to 64 [ 0.252759] pci 0000:00:0b.0: setting latency timer to 64 [ 0.252764] pci 0000:00:0c.0: setting latency timer to 64 [ 0.252769] pci 0000:00:0d.0: setting latency timer to 64 [ 0.252774] pci 0000:00:0e.0: setting latency timer to 64 [ 0.252778] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.252781] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.252784] pci_bus 0000:05: resource 0 io: [0xb000-0xbfff] [ 0.252786] pci_bus 0000:05: resource 1 mem: [0xc4000000-0xc5ffffff] [ 0.252789] pci_bus 0000:05: resource 2 pref mem [0x80000000-0x800fffff] [ 0.252791] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.252794] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.252797] pci_bus 0000:01: resource 0 io: [0xa000-0xafff] [ 0.252800] pci_bus 0000:01: resource 1 mem: [0xc0000000-0xc3ffffff] [ 0.252802] pci_bus 0000:01: resource 2 pref mem [0xa0000000-0xbfffffff] [ 0.252840] NET: Registered protocol family 2 [ 0.252971] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.253886] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.256500] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.257125] TCP: Hash tables configured (established 262144 bind 65536) [ 0.257128] TCP reno registered [ 0.257236] NET: Registered protocol family 1 [ 0.270080] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.270086] pci 0000:00:0b.0: Found disabled HT MSI Mapping [ 0.270094] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.270097] pci 0000:00:0b.0: Linking AER extended capability [ 0.270135] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.270141] pci 0000:00:0c.0: Found disabled HT MSI Mapping [ 0.270149] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.270151] pci 0000:00:0c.0: Linking AER extended capability [ 0.270193] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.270199] pci 0000:00:0d.0: Found disabled HT MSI Mapping [ 0.270206] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.270209] pci 0000:00:0d.0: Linking AER extended capability [ 0.270255] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.270260] pci 0000:00:0e.0: Found disabled HT MSI Mapping [ 0.270268] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.270270] pci 0000:00:0e.0: Linking AER extended capability [ 0.270290] pci 0000:01:00.0: Boot video device [ 0.270588] Scanning for low memory corruption every 60 seconds [ 0.270725] audit: initializing netlink socket (disabled) [ 0.270736] type=2000 audit(1285530279.270:1): initialized [ 0.280042] Trying to unpack rootfs image as initramfs... [ 0.290509] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.301763] VFS: Disk quotas dquot_6.5.2 [ 0.301828] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.302520] fuse init (API version 7.13) [ 0.302613] msgmni has been set to 3998 [ 0.302831] alg: No test for stdrng (krng) [ 0.302892] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.302895] io scheduler noop registered [ 0.302897] io scheduler anticipatory registered [ 0.302899] io scheduler deadline registered [ 0.302939] io scheduler cfq registered (default) [ 0.303081] alloc irq_desc for 24 on node 0 [ 0.303083] alloc kstat_irqs on node 0 [ 0.303092] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X [ 0.303098] pcieport 0000:00:0b.0: setting latency timer to 64 [ 0.303195] alloc irq_desc for 25 on node 0 [ 0.303197] alloc kstat_irqs on node 0 [ 0.303202] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X [ 0.303207] pcieport 0000:00:0c.0: setting latency timer to 64 [ 0.310191] alloc irq_desc for 26 on node 0 [ 0.310194] alloc kstat_irqs on node 0 [ 0.310204] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X [ 0.310210] pcieport 0000:00:0d.0: setting latency timer to 64 [ 0.310364] alloc irq_desc for 27 on node 0 [ 0.310366] alloc kstat_irqs on node 0 [ 0.310371] pcieport 0000:00:0e.0: irq 27 for MSI/MSI-X [ 0.310375] pcieport 0000:00:0e.0: setting latency timer to 64 [ 0.310442] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.310468] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.310573] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.310577] ACPI: Power Button [PWRB] [ 0.310637] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.310639] ACPI: Power Button [PWRF] [ 0.310695] fan PNP0C0B:00: registered as cooling_device0 [ 0.310700] ACPI: Fan [FAN] (on) [ 0.311260] processor LNXCPU:00: registered as cooling_device1 [ 0.316271] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.316278] ACPI: Thermal Zone [THRM] (40 C) [ 0.317711] Linux agpgart interface v0.103 [ 0.317748] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.319014] brd: module loaded [ 0.319499] loop: module loaded [ 0.319591] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.330228] pata_acpi 0000:00:06.0: setting latency timer to 64 [ 0.330741] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23 [ 0.330746] alloc irq_desc for 23 on node 0 [ 0.330749] alloc kstat_irqs on node 0 [ 0.330758] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 0.330780] pata_acpi 0000:00:08.0: setting latency timer to 64 [ 0.330786] pata_acpi 0000:00:08.0: PCI INT A disabled [ 0.331189] Fixed MDIO Bus: probed [ 0.331225] PPP generic driver version 2.4.2 [ 0.331282] tun: Universal TUN/TAP device driver, 1.6 [ 0.331284] tun: (C) 1999-2004 Max Krasnyansky [ 0.331380] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.331718] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.331721] alloc irq_desc for 22 on node 0 [ 0.331724] alloc kstat_irqs on node 0 [ 0.331730] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22 [ 0.331746] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.331748] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.331790] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.331818] ehci_hcd 0000:00:02.1: debug port 1 [ 0.331823] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.331842] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfeb00000 [ 0.350227] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.350366] usb usb1: configuration #1 chosen from 1 choice [ 0.350398] hub 1-0:1.0: USB hub found [ 0.350409] hub 1-0:1.0: 10 ports detected [ 0.350506] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.360445] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 0.360451] alloc irq_desc for 21 on node 0 [ 0.360453] alloc kstat_irqs on node 0 [ 0.360463] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, low) -> IRQ 21 [ 0.360483] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.360486] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.360566] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.360595] ohci_hcd 0000:00:02.0: irq 21, io mem 0xc6003000 [ 0.422420] usb usb2: configuration #1 chosen from 1 choice [ 0.422453] hub 2-0:1.0: USB hub found [ 0.422464] hub 2-0:1.0: 10 ports detected [ 0.422551] uhci_hcd: USB Universal Host Controller Interface driver [ 0.422639] PNP: No PS/2 controller found. Probing ports directly. [ 0.547963] Freeing initrd memory: 9686k freed [ 0.670473] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.670618] mice: PS/2 mouse device common for all mice [ 0.670729] rtc_cmos 00:04: RTC can wake from S4 [ 0.670780] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.670802] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.670964] device-mapper: uevent: version 1.0.3 [ 0.671158] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.671213] device-mapper: multipath: version 1.1.0 loaded [ 0.671215] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.671352] cpuidle: using governor ladder [ 0.671354] cpuidle: using governor menu [ 0.671724] TCP cubic registered [ 0.671870] NET: Registered protocol family 10 [ 0.672354] lo: Disabled Privacy Extensions [ 0.672658] NET: Registered protocol family 17 [ 0.672692] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00) [ 0.672739] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x6 [ 0.672742] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x8 [ 0.672744] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 0.672866] PM: Resume from disk failed. [ 0.672884] registered taskstats version 1 [ 0.673148] Magic number: 10:672:749 [ 0.673165] tty ttyS0: hash matches [ 0.673232] rtc_cmos 00:04: setting system clock to 2010-09-26 19:44:40 UTC (1285530280) [ 0.673235] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.673237] EDD information not available. [ 0.673294] Freeing unused kernel memory: 880k freed [ 0.673751] Write protecting the kernel read-only data: 7696k [ 0.694823] udev[72]: starting version 163 [ 0.793779] uvesafb: failed to execute /sbin/v86d [ 0.793782] uvesafb: make sure that the v86d helper is installed and executable [ 0.793786] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 0.793789] uvesafb: vbe_init() failed with -22 [ 0.793800] uvesafb: probe of uvesafb.0 failed with error -22 [ 0.922899] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.923259] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20 [ 0.923264] alloc irq_desc for 20 on node 0 [ 0.923266] alloc kstat_irqs on node 0 [ 0.923276] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20 [ 0.923281] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 0.923330] nv_probe: set workaround bit for reversed mac addr [ 0.936866] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 0.936872] alloc irq_desc for 16 on node 0 [ 0.936874] alloc kstat_irqs on node 0 [ 0.936884] firewire_ohci 0000:05:0b.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 1.030022] firewire_ohci: Added fw-ohci device 0000:05:0b.0, OHCI version 1.10 [ 1.030789] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 1.030794] alloc irq_desc for 17 on node 0 [ 1.030796] alloc kstat_irqs on node 0 [ 1.030805] skge 0000:05:0c.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 1.030843] skge 1.13 addr 0xc5000000 irq 17 chip Yukon-Lite rev 9 [ 1.031495] skge eth0: addr 00:17:31:9a:a8:0b [ 1.070026] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 1.450794] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:17:31:9a:9c:59 [ 1.450798] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 [ 1.451447] usb 2-2: configuration #1 chosen from 1 choice [ 1.451827] pata_amd 0000:00:06.0: version 0.4.1 [ 1.451870] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.453106] scsi0 : pata_amd [ 1.453303] scsi1 : pata_amd [ 1.454044] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.454047] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.454756] sata_nv 0000:00:08.0: version 3.5 [ 1.454770] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23 [ 1.454819] sata_nv 0000:00:08.0: setting latency timer to 64 [ 1.461265] scsi2 : sata_nv [ 1.461483] scsi3 : sata_nv [ 1.461742] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xd400 irq 23 [ 1.461745] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xd408 irq 23 [ 1.530091] firewire_core: created device fw0: GUID 0011d80000aae2f1, S400 [ 1.800018] usb 2-9: new low speed USB device using ohci_hcd and address 3 [ 1.800263] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL12, max UDMA/33 [ 1.800289] ata2: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000) ACPI=0x701f (60:600:0x13) [ 1.840206] ata2.00: configured for UDMA/33 [ 1.846038] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL12 PQ: 0 ANSI: 5 [ 1.850451] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.850455] Uniform CD-ROM driver Revision: 3.20 [ 1.850572] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.850637] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 1.950034] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.970213] ata3.00: ATA-7: SAMSUNG HD300LJ, ZT100-13, max UDMA7 [ 1.970216] ata3.00: 586072368 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 2.010231] ata3.00: configured for UDMA/133 [ 2.010318] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD300LJ ZT10 PQ: 0 ANSI: 5 [ 2.010462] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.010666] sd 2:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 2.010712] sd 2:0:0:0: [sda] Write Protect is off [ 2.010715] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.010739] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.010882] sda: sda1 sda2 sda3 sda4 < [ 2.023370] usb 2-9: configuration #1 chosen from 1 choice [ 2.032066] sda5 > [ 2.032703] usbcore: registered new interface driver hiddev [ 2.047922] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.340025] ata4: SATA link down (SStatus 0 SControl 300) [ 2.360073] usb 2-10: new low speed USB device using ohci_hcd and address 4 [ 2.592403] usb 2-10: configuration #1 chosen from 1 choice [ 2.639775] REISERFS (device sda1): found reiserfs format "3.6" with standard journal [ 2.639790] REISERFS (device sda1): using ordered data mode [ 2.643879] REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 2.645352] REISERFS (device sda1): checking transaction log (sda1) [ 2.685555] REISERFS (device sda1): Using r5 hash to sort names [ 3.099405] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 ] on usb-0000:00:02.0-2/input0 [ 3.111633] input: HID 04d9:2083 as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input3 [ 3.111718] generic-usb 0003:04D9:2083.0002: input,hidraw1: USB HID v1.10 Mouse [HID 04d9:2083] on usb-0000:00:02.0-9/input0 [ 3.116605] input: USB USB Keykoard as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.0/input/input4 [ 3.116677] generic-usb 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:02.0-10/input0 [ 5.292636] Adding 498004k swap on /dev/sda2. Priority:-1 extents:1 across:498004k [ 6.076683] udev[347]: starting version 163 [ 6.810132] udev[373]: renamed network interface eth1 to eth1-eth0 [ 7.366769] lp: driver loaded but no devices found [ 7.597518] udev[356]: renamed network interface eth0 to eth1 [ 7.611950] udev[373]: renamed network interface eth1-eth0 to eth0 [ 7.817854] EDAC MC: Ver: 2.1.0 Sep 16 2010 [ 7.835431] EDAC amd64_edac: Ver: 3.2.0 Sep 16 2010 [ 7.835515] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 7.835520] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 7.835522] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 7.835523] (Note that use of the override may cause unknown side effects.) [ 7.835542] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 7.882688] vga16fb: initializing [ 7.882693] vga16fb: mapped to 0xffff8800000a0000 [ 7.882884] fb0: VGA16 VGA frame buffer device [ 7.901152] type=1505 audit(1285530287.726:2): operation="profile_load" pid=513 name="/sbin/dhclient3" [ 7.901446] type=1505 audit(1285530287.726:3): operation="profile_load" pid=513 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 7.901612] type=1505 audit(1285530287.726:4): operation="profile_load" pid=513 name="/usr/lib/connman/scripts/dhclient-script" [ 8.188018] i2c i2c-0: nForce2 SMBus adapter at 0x4c00 [ 8.188101] i2c i2c-1: nForce2 SMBus adapter at 0x4c40 [ 9.159346] nvidia: module license 'NVIDIA' taints kernel. [ 9.159351] Disabling lock debugging due to kernel taint [ 9.672448] i2c /dev entries driver [ 9.932205] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 9.932212] alloc irq_desc for 18 on node 0 [ 9.932215] alloc kstat_irqs on node 0 [ 9.932225] nvidia 0000:01:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 9.932232] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.932237] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 9.933559] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 260.19.06 Mon Sep 13 04:29:19 PDT 2010 [ 10.246130] skge eth1: enabling interface [ 10.249620] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 10.285397] type=1505 audit(1285530290.106:5): operation="profile_load" pid=624 name="/usr/sbin/ntpd" [ 10.358901] Console: switching to colour frame buffer device 80x30 [ 10.645470] it87: Found IT8712F chip at 0x290, revision 7 [ 10.645479] it87: in3 is VCC (+5V) [ 10.645481] it87: in7 is VCCH (+5V Stand-By) [ 10.645557] ACPI: resource it87 [0x295-0x296] conflicts with ACPI region HWRE [0x295-0x296] [ 10.645559] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.951393] skge eth1: Link is up at 100 Mbps, full duplex, flow control both [ 11.951713] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 11.999707] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 23 [ 11.999714] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 23 (level, low) -> IRQ 23 [ 11.999740] Intel ICH 0000:00:04.0: setting latency timer to 64 [ 12.330033] intel8x0_measure_ac97_clock: measured 50425 usecs (2480 samples) [ 12.330037] intel8x0: clocking to 46847 [ 13.120302] /build/buildd/linux-2.6.32/drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed [ 13.120592] generic-usb 0003:1C4F:0002.0004: timeout initializing reports [ 13.120724] input: USB USB Keykoard as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.1/input/input5 [ 13.120826] generic-usb 0003:1C4F:0002.0004: input,hidraw3: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:02.0-10/input1 [ 13.120861] usbcore: registered new interface driver usbhid [ 13.120864] usbhid: v2.6:USB HID core driver [ 14.255010] JFS: nTxBlock = 8192, nTxLock = 65536 [ 14.383405] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 14.387657] SGI XFS Quota Management subsystem [ 14.482898] XFS mounting filesystem sda5 [ 14.589760] Ending clean XFS mount for filesystem: sda5 [ 16.240266] type=1505 audit(1285530296.066:6): operation="profile_load" pid=918 name="/usr/sbin/avahi-daemon" [ 18.631122] type=1505 audit(1285530298.456:7): operation="profile_load" pid=1046 name="/bin/ping" [ 18.636047] type=1505 audit(1285530298.456:8): operation="profile_replace" pid=1049 name="/sbin/dhclient3" [ 18.636341] type=1505 audit(1285530298.456:9): operation="profile_replace" pid=1049 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 18.636517] type=1505 audit(1285530298.456:10): operation="profile_replace" pid=1049 name="/usr/lib/connman/scripts/dhclient-script" [ 18.640539] type=1505 audit(1285530298.466:11): operation="profile_load" pid=1050 name="/sbin/klogd" [ 18.662158] type=1505 audit(1285530298.486:12): operation="profile_load" pid=1051 name="/sbin/syslog-ng" [ 18.666787] type=1505 audit(1285530298.486:13): operation="profile_load" pid=1053 name="/sbin/syslogd" [ 18.840218] type=1505 audit(1285530298.666:14): operation="profile_load" pid=1055 name="/usr/lib/chromium-browser/chromium-browser" [ 18.841904] type=1505 audit(1285530298.666:15): operation="profile_load" pid=1055 name="/usr/lib/chromium-browser/chromium-browser//browser_java" [ 22.450024] eth0: no IPv6 routers present [ 22.700043] eth1: no IPv6 routers present