[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-23-generic (root@tangerine) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #37 SMP Tue Nov 9 15:34:52 UTC 2010 (Ubuntu 2.6.35-23.37-generic 2.6.35.7) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000afe8e000 (usable) [ 0.000000] BIOS-e820: 00000000afe8e000 - 00000000afea0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afea0000 - 00000000afeb1000 (ACPI data) [ 0.000000] BIOS-e820: 00000000afeb1000 - 00000000afeb3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afeb3000 - 00000000afeff000 (reserved) [ 0.000000] BIOS-e820: 00000000aff00000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] DMI present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xafe8e max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back [ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000140000000 aka 5120M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000b0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved) [ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009dc00 (usable) [ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000afe8e000 (usable) [ 0.000000] modified: 00000000afe8e000 - 00000000afea0000 (ACPI NVS) [ 0.000000] modified: 00000000afea0000 - 00000000afeb1000 (ACPI data) [ 0.000000] modified: 00000000afeb1000 - 00000000afeb3000 (ACPI NVS) [ 0.000000] modified: 00000000afeb3000 - 00000000afeff000 (reserved) [ 0.000000] modified: 00000000aff00000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] found SMP MP-table at [c00f7a00] f7a00 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000 [ 0.000000] RAMDISK: 375ae000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 009a5000 - 013e6cc1 [ 0.000000] Move RAMDISK from 00000000375ae000 - 0000000037fefcc0 to 009a5000 - 013e6cc0 [ 0.000000] ACPI: RSDP 000f7950 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT afea2224 00084 (v01 LENOVO TP-82 00002010 LTP 00000000) [ 0.000000] ACPI: FACP afeafedf 000F4 (v03 LENOVO TP-82 00002010 AMD 000F4240) [ 0.000000] ACPI: DSDT afea22a8 0DC37 (v01 LENOVO TP-82 00002010 MSFT 03000001) [ 0.000000] ACPI: FACS afeb2fc0 00040 [ 0.000000] ACPI: TCPA afeb0047 00032 (v02 LENOVO TP-82 00002010 PTEC 00000000) [ 0.000000] ACPI: EINJ afeb0079 001B0 (v01 LENOVO TP-82 00002010 PTL 00000001) [ 0.000000] ACPI: HEST afeb0229 002E4 (v01 LENOVO TP-82 00002010 PTL 00000001) [ 0.000000] ACPI: BERT afeb050d 00030 (v01 LENOVO TP-82 00002010 PTL 00000001) [ 0.000000] ACPI: SSDT afeb053d 000E1 (v01 LENOVO TP-82 00002010 INTL 20050624) [ 0.000000] ACPI: ERST afeb061e 00270 (v01 LENOVO TP-82 00002010 PTL 00000001) [ 0.000000] ACPI: SSDT afeb088e 0052A (v01 LENOVO TP-82 00002010 AMD 00000001) [ 0.000000] ACPI: APIC afeb0db8 0005E (v01 LENOVO TP-82 00002010 LTP 00000000) [ 0.000000] ACPI: MCFG afeb0e16 0003C (v01 LENOVO TP-82 00002010 LTP 00000000) [ 0.000000] ACPI: HPET afeb0e52 00038 (v01 LENOVO TP-82 00002010 LTP 00000001) [ 0.000000] ACPI: SLIC afeb0e8a 00176 (v01 LENOVO TP-82 00002010 LTP 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1926MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000afe8e [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x00000002 [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000afe8e [ 0.000000] On node 0 totalpages: 720412 [ 0.000000] free_area_init_node: node 0, pgdat c07ffd00, node_mem_map c13e8020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 3854 pages used for memmap [ 0.000000] HighMem zone: 489346 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [16000 - 167ff] [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36416 r0 d20928 u2097152 [ 0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 714782 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-23-generic root=UUID=664cdfd7-7c92-48ef-b52a-ba0b76be754f ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 14410500 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Subtract (53 early reservations) [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE [ 0.000000] #2 [0000100000 - 00009a0adc] TEXT DATA BSS [ 0.000000] #3 [00009a1000 - 00009a4130] BRK [ 0.000000] #4 [00000f7a10 - 0000100000] BIOS reserved [ 0.000000] #5 [00000f7a00 - 00000f7a10] MP-table mpf [ 0.000000] #6 [000009dc00 - 000009e171] BIOS reserved [ 0.000000] #7 [000009e2d5 - 00000f7a00] BIOS reserved [ 0.000000] #8 [000009e171 - 000009e2d5] MP-table mpc [ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE [ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP [ 0.000000] #11 [0000015000 - 0000016000] PGTABLE [ 0.000000] #12 [00009a5000 - 00013e7000] NEW RAMDISK [ 0.000000] #13 [00013e7000 - 00013e8000] BOOTMEM [ 0.000000] #14 [00013e8000 - 00029e8000] BOOTMEM [ 0.000000] #15 [00029e8000 - 00029e8004] BOOTMEM [ 0.000000] #16 [00029e8040 - 00029e8100] BOOTMEM [ 0.000000] #17 [00029e8100 - 00029e8154] BOOTMEM [ 0.000000] #18 [00029e8180 - 00029eb180] BOOTMEM [ 0.000000] #19 [00029eb180 - 00029eb238] BOOTMEM [ 0.000000] #20 [00029eb240 - 00029f1240] BOOTMEM [ 0.000000] #21 [00029f1240 - 00029f1265] BOOTMEM [ 0.000000] #22 [00029f1280 - 00029f12a7] BOOTMEM [ 0.000000] #23 [00029f12c0 - 00029f1480] BOOTMEM [ 0.000000] #24 [00029f1480 - 00029f14c0] BOOTMEM [ 0.000000] #25 [00029f14c0 - 00029f1500] BOOTMEM [ 0.000000] #26 [00029f1500 - 00029f1540] BOOTMEM [ 0.000000] #27 [00029f1540 - 00029f1580] BOOTMEM [ 0.000000] #28 [00029f1580 - 00029f15c0] BOOTMEM [ 0.000000] #29 [00029f15c0 - 00029f1600] BOOTMEM [ 0.000000] #30 [00029f1600 - 00029f1640] BOOTMEM [ 0.000000] #31 [00029f1640 - 00029f1680] BOOTMEM [ 0.000000] #32 [00029f1680 - 00029f16c0] BOOTMEM [ 0.000000] #33 [00029f16c0 - 00029f1700] BOOTMEM [ 0.000000] #34 [00029f1700 - 00029f1740] BOOTMEM [ 0.000000] #35 [00029f1740 - 00029f1780] BOOTMEM [ 0.000000] #36 [00029f1780 - 00029f17c0] BOOTMEM [ 0.000000] #37 [00029f17c0 - 00029f17d0] BOOTMEM [ 0.000000] #38 [00029f1800 - 00029f1810] BOOTMEM [ 0.000000] #39 [00029f1840 - 00029f18aa] BOOTMEM [ 0.000000] #40 [00029f18c0 - 00029f192a] BOOTMEM [ 0.000000] #41 [0002c00000 - 0002c0e000] BOOTMEM [ 0.000000] #42 [0002e00000 - 0002e0e000] BOOTMEM [ 0.000000] #43 [00029f3940 - 00029f3944] BOOTMEM [ 0.000000] #44 [00029f3980 - 00029f3984] BOOTMEM [ 0.000000] #45 [00029f39c0 - 00029f39c8] BOOTMEM [ 0.000000] #46 [00029f3a00 - 00029f3a08] BOOTMEM [ 0.000000] #47 [00029f3a40 - 00029f3ae8] BOOTMEM [ 0.000000] #48 [00029f3b00 - 00029f3b68] BOOTMEM [ 0.000000] #49 [00029f3b80 - 00029f7b80] BOOTMEM [ 0.000000] #50 [00029f7b80 - 0002a77b80] BOOTMEM [ 0.000000] #51 [0002a77b80 - 0002ab7b80] BOOTMEM [ 0.000000] #52 [0002e0e000 - 0003bcc304] BOOTMEM [ 0.000000] Initializing HighMem for node 0 (000377fe:000afe8e) [ 0.000000] Memory: 2824716k/2882104k available (4930k kernel code, 56932k reserved, 2334k data, 684k init, 1972800k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0819000 - 0xc08c4000 ( 684 kB) [ 0.000000] .data : 0xc05d0bee - 0xc0818628 (2334 kB) [ 0.000000] .text : 0xc0100000 - 0xc05d0bee (4930 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:512 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2294.257 MHz processor. [ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.51 BogoMIPS (lpj=9177028) [ 0.004010] pid_max: default: 32768 minimum: 301 [ 0.004027] Security Framework initialized [ 0.004045] AppArmor: AppArmor initialized [ 0.004047] Yama: becoming mindful. [ 0.004106] Mount-cache hash table entries: 512 [ 0.004215] Initializing cgroup subsys ns [ 0.004219] Initializing cgroup subsys cpuacct [ 0.004223] Initializing cgroup subsys memory [ 0.004232] Initializing cgroup subsys devices [ 0.004235] Initializing cgroup subsys freezer [ 0.004237] Initializing cgroup subsys net_cls [ 0.004259] CPU: Physical Processor ID: 0 [ 0.004261] CPU: Processor Core ID: 0 [ 0.004264] mce: CPU supports 6 MCE banks [ 0.004273] using C1E aware idle routine [ 0.004278] Performance Events: AMD PMU driver. [ 0.004286] ... version: 0 [ 0.004288] ... bit width: 48 [ 0.004290] ... generic registers: 4 [ 0.004292] ... value mask: 0000ffffffffffff [ 0.004295] ... max period: 00007fffffffffff [ 0.004297] ... fixed-purpose events: 0 [ 0.004299] ... event mask: 000000000000000f [ 0.008956] ACPI: Core revision 20100428 [ 0.028022] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.028030] ftrace: allocating 21766 entries in 43 pages [ 0.032065] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.032367] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.074302] CPU0: AMD Turion(tm) II P520 Dual-Core Processor stepping 03 [ 0.076000] Booting Node 0, Processors #1 Ok. [ 0.008000] Initializing CPU#1 [ 0.164008] Brought up 2 CPUs [ 0.164010] Total of 2 processors activated (9176.97 BogoMIPS). [ 0.164017] System has AMD C1E enabled [ 0.164045] Switch to broadcast mode on CPU1 [ 0.164274] Switch to broadcast mode on CPU0 [ 0.164274] devtmpfs: initialized [ 0.164883] regulator: core version 0.5 [ 0.164910] Time: 14:15:15 Date: 11/11/10 [ 0.164944] NET: Registered protocol family 16 [ 0.165037] EISA bus registered [ 0.165041] node 0 link 0: io port [1000, ffff] [ 0.165044] TOM: 00000000c0000000 aka 3072M [ 0.165046] Fam 10h mmconf [e0000000, efffffff] [ 0.165049] node 0 link 0: mmio [c0000000, cfffffff] [ 0.165051] node 0 link 0: mmio [d0000000, d02fffff] [ 0.165054] node 0 link 0: mmio [d0300000, d04fffff] [ 0.165056] node 0 link 0: mmio [d0500000, dfffffff] [ 0.165059] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.165061] node 0 link 0: mmio [f0000000, febfffff] [ 0.165064] node 0 link 0: mmio [fec00000, ffffffff] [ 0.165066] TOM2: 0000000140000000 aka 5120M [ 0.165068] bus: [00, 1f] on node 0 link 0 [ 0.165071] bus: 00 index 0 [io 0x0000-0xffff] [ 0.165073] bus: 00 index 1 [mem 0xc0000000-0xdfffffff] [ 0.165075] bus: 00 index 2 [mem 0xf0000000-0xffffffff] [ 0.165083] ACPI: bus type pci registered [ 0.165140] PCI: MMCONFIG for domain 0000 [bus 00-09] at [mem 0xe0000000-0xe09fffff] (base 0xe0000000) [ 0.165143] PCI: not using MMCONFIG [ 0.165378] PCI: PCI BIOS revision 2.10 entry at 0xfdc8a, last bus=10 [ 0.165380] PCI: Using configuration type 1 for base access [ 0.165381] PCI: Using configuration type 1 for extended access [ 0.165396] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.165397] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.165399] mtrr: probably your BIOS does not setup all CPUs. [ 0.165400] mtrr: corrected configuration. [ 0.166003] Trying to unpack rootfs image as initramfs... [ 0.172067] bio: create slab at 0 [ 0.173878] ACPI: EC: Look up EC in DSDT [ 0.174104] \_SB_:_OSC evaluation returned wrong type [ 0.174105] _OSC request data:1 7 [ 0.175922] ACPI: BIOS _OSI(Linux) query ignored [ 0.176320] ACPI: OEMN afeb1aac 00131 (v01 AMD NAHP 00000001 MSFT 03000001) [ 0.176778] ACPI: Enabled 1 new runtime GPEs, added 0 new wakeup GPEs [ 0.176782] ACPI: Dynamic OEM Table Load: [ 0.176784] ACPI: OEMN (null) 00131 (v01 AMD NAHP 00000001 MSFT 03000001) [ 0.180161] ACPI: Interpreter enabled [ 0.180166] ACPI: (supports S0 S3 S4 S5) [ 0.180187] ACPI: Using IOAPIC for interrupt routing [ 0.180513] PCI: MMCONFIG for domain 0000 [bus 00-09] at [mem 0xe0000000-0xe09fffff] (base 0xe0000000) [ 0.181018] [Firmware Bug]: PCI: MMCONFIG at [mem 0xe0000000-0xe09fffff] not reserved in ACPI motherboard resources [ 0.181021] PCI: not using MMCONFIG [ 0.181370] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.181534] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.183210] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.188323] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 0.188657] ACPI: No dock devices found. [ 0.188660] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.189306] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.191716] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.191719] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d1fff] [ 0.191721] pci_root PNP0A08:00: host bridge window [mem 0x000d2000-0x000d3fff] [ 0.191724] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff] [ 0.191726] pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff] [ 0.191729] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff] [ 0.191731] pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff] [ 0.191733] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff] [ 0.191735] pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff] [ 0.191738] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] [ 0.191741] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] [ 0.191743] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.191745] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.191879] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.191882] pci 0000:00:04.0: PME# disabled [ 0.191915] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.191918] pci 0000:00:05.0: PME# disabled [ 0.191951] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.191954] pci 0000:00:06.0: PME# disabled [ 0.192040] pci 0000:00:11.0: reg 10: [io 0x8440-0x8447] [ 0.192046] pci 0000:00:11.0: reg 14: [io 0x8430-0x8433] [ 0.192053] pci 0000:00:11.0: reg 18: [io 0x8420-0x8427] [ 0.192059] pci 0000:00:11.0: reg 1c: [io 0x8410-0x8413] [ 0.192065] pci 0000:00:11.0: reg 20: [io 0x8400-0x840f] [ 0.192071] pci 0000:00:11.0: reg 24: [mem 0xd0a07c00-0xd0a07fff] [ 0.192127] pci 0000:00:12.0: reg 10: [mem 0xd0a04000-0xd0a04fff] [ 0.192186] pci 0000:00:12.2: reg 10: [mem 0xd0a07000-0xd0a070ff] [ 0.192232] pci 0000:00:12.2: supports D1 D2 [ 0.192234] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.192238] pci 0000:00:12.2: PME# disabled [ 0.192264] pci 0000:00:13.0: reg 10: [mem 0xd0a05000-0xd0a05fff] [ 0.192323] pci 0000:00:13.2: reg 10: [mem 0xd0a07400-0xd0a074ff] [ 0.192369] pci 0000:00:13.2: supports D1 D2 [ 0.192371] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.192375] pci 0000:00:13.2: PME# disabled [ 0.192457] pci 0000:00:14.2: reg 10: [mem 0xd0a00000-0xd0a03fff 64bit] [ 0.192495] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.192499] pci 0000:00:14.2: PME# disabled [ 0.192595] pci 0000:00:16.0: reg 10: [mem 0xd0a06000-0xd0a06fff] [ 0.192654] pci 0000:00:16.2: reg 10: [mem 0xd0a07800-0xd0a078ff] [ 0.192700] pci 0000:00:16.2: supports D1 D2 [ 0.192701] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.192705] pci 0000:00:16.2: PME# disabled [ 0.192821] pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xcfffffff pref] [ 0.192824] pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff] [ 0.192828] pci 0000:01:05.0: reg 18: [mem 0xd0400000-0xd040ffff] [ 0.192835] pci 0000:01:05.0: reg 24: [mem 0xd0300000-0xd03fffff] [ 0.192846] pci 0000:01:05.0: supports D1 D2 [ 0.192861] pci 0000:01:05.1: reg 10: [mem 0xd0410000-0xd0413fff] [ 0.192880] pci 0000:01:05.1: supports D1 D2 [ 0.192919] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.192923] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] [ 0.192925] pci 0000:00:01.0: bridge window [mem 0xd0300000-0xd04fffff] [ 0.192929] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.192953] pci 0000:00:04.0: PCI bridge to [bus 02-07] [ 0.192957] pci 0000:00:04.0: bridge window [io 0xa000-0xbfff] [ 0.192959] pci 0000:00:04.0: bridge window [mem 0xd0600000-0xd07fffff] [ 0.192963] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.193006] pci 0000:08:00.0: reg 10: [io 0xc000-0xc0ff] [ 0.193021] pci 0000:08:00.0: reg 18: [mem 0xd0204000-0xd0204fff 64bit pref] [ 0.193032] pci 0000:08:00.0: reg 20: [mem 0xd0200000-0xd0203fff 64bit pref] [ 0.193038] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.193066] pci 0000:08:00.0: supports D1 D2 [ 0.193068] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.193072] pci 0000:08:00.0: PME# disabled [ 0.200031] pci 0000:00:05.0: PCI bridge to [bus 08-08] [ 0.200038] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 0.200041] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.200046] pci 0000:00:05.0: bridge window [mem 0xd0200000-0xd02fffff 64bit pref] [ 0.200096] pci 0000:09:00.0: reg 10: [io 0xd000-0xd0ff] [ 0.200103] pci 0000:09:00.0: reg 14: [mem 0xd0500000-0xd0503fff] [ 0.200150] pci 0000:09:00.0: supports D1 D2 [ 0.200152] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot [ 0.200156] pci 0000:09:00.0: PME# disabled [ 0.208028] pci 0000:00:06.0: PCI bridge to [bus 09-09] [ 0.208034] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] [ 0.208038] pci 0000:00:06.0: bridge window [mem 0xd0500000-0xd05fffff] [ 0.208042] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.208107] pci 0000:00:14.4: PCI bridge to [bus 0a-0a] (subtractive decode) [ 0.208112] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) [ 0.208116] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.208120] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.208123] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.208125] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode) [ 0.208127] pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode) [ 0.208130] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode) [ 0.208132] pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode) [ 0.208134] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode) [ 0.208136] pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode) [ 0.208139] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode) [ 0.208141] pci 0000:00:14.4: bridge window [mem 0x000de000-0x000dffff] (subtractive decode) [ 0.208143] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 0.208145] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode) [ 0.208148] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.208150] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.208164] pci_bus 0000:00: on NUMA node 0 [ 0.208172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.208400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] [ 0.208475] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 0.208538] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 0.208646] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.208732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.213031] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0 [ 0.213201] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0 [ 0.213376] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0 [ 0.213548] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0 [ 0.213698] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0 [ 0.213815] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0 [ 0.213932] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0 [ 0.214049] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0 [ 0.214156] HEST: HEST table parsing is initialized. [ 0.214229] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.214233] vgaarb: loaded [ 0.214354] SCSI subsystem initialized [ 0.216002] libata version 3.00 loaded. [ 0.216002] usbcore: registered new interface driver usbfs [ 0.216002] usbcore: registered new interface driver hub [ 0.216002] usbcore: registered new device driver usb [ 0.216002] ACPI: WMI: Mapper loaded [ 0.216002] PCI: Using ACPI for IRQ routing [ 0.216002] PCI: pci_cache_line_size set to 64 bytes [ 0.216002] reserve RAM buffer: 0000000000002000 - 000000000000ffff [ 0.216002] reserve RAM buffer: 000000000009dc00 - 000000000009ffff [ 0.216002] reserve RAM buffer: 00000000afe8e000 - 00000000afffffff [ 0.216002] NetLabel: Initializing [ 0.216002] NetLabel: domain hash size = 128 [ 0.216002] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.216002] NetLabel: unlabeled traffic allowed by default [ 0.216002] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.216002] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.216027] Switching to clocksource tsc [ 0.226997] AppArmor: AppArmor Filesystem Enabled [ 0.227010] pnp: PnP ACPI init [ 0.227025] ACPI: bus type pnp registered [ 0.230168] pnp: PnP ACPI: found 10 devices [ 0.230172] ACPI: ACPI bus type pnp unregistered [ 0.230175] PnPBIOS: Disabled by ACPI PNP [ 0.230190] system 00:01: [io 0x0f50-0x0f51] has been reserved [ 0.230194] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.230196] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.230204] system 00:08: [io 0x0220-0x022f] has been reserved [ 0.230207] system 00:08: [io 0x040b] has been reserved [ 0.230209] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.230211] system 00:08: [io 0x04d6] has been reserved [ 0.230214] system 00:08: [io 0x0530-0x0537] has been reserved [ 0.230216] system 00:08: [io 0x0c00-0x0c01] has been reserved [ 0.230218] system 00:08: [io 0x0c14] has been reserved [ 0.230220] system 00:08: [io 0x0c50-0x0c52] has been reserved [ 0.230222] system 00:08: [io 0x0c6c] has been reserved [ 0.230224] system 00:08: [io 0x0c6f] has been reserved [ 0.230227] system 00:08: [io 0x0cd0-0x0cd1] has been reserved [ 0.230229] system 00:08: [io 0x0cd2-0x0cd3] has been reserved [ 0.230231] system 00:08: [io 0x0cd4-0x0cd5] has been reserved [ 0.230233] system 00:08: [io 0x0cd6-0x0cd7] has been reserved [ 0.230236] system 00:08: [io 0x0cd8-0x0cdf] has been reserved [ 0.230238] system 00:08: [io 0x8000-0x805f] has been reserved [ 0.230241] system 00:08: [io 0x8100-0x81ff window] has been reserved [ 0.230243] system 00:08: [io 0x8200-0x82ff window] has been reserved [ 0.230250] system 00:08: [io 0x0f40-0x0f47] has been reserved [ 0.230252] system 00:08: [io 0x087f] has been reserved [ 0.230257] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.230260] system 00:09: [mem 0xffe00000-0xffffffff] could not be reserved [ 0.230262] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.230265] system 00:09: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.230267] system 00:09: [mem 0xfed61000-0xfed613ff] has been reserved [ 0.230269] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved [ 0.230272] system 00:09: [mem 0xfffffd00-0x0001fcff] could not be reserved [ 0.265985] pci 0000:00:05.0: BAR 14: assigned [mem 0xd0800000-0xd08fffff] [ 0.265988] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.265991] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] [ 0.265994] pci 0000:00:01.0: bridge window [mem 0xd0300000-0xd04fffff] [ 0.265998] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.266001] pci 0000:00:04.0: PCI bridge to [bus 02-07] [ 0.266004] pci 0000:00:04.0: bridge window [io 0xa000-0xbfff] [ 0.266007] pci 0000:00:04.0: bridge window [mem 0xd0600000-0xd07fffff] [ 0.266010] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.266014] pci 0000:08:00.0: BAR 6: assigned [mem 0xd0220000-0xd023ffff pref] [ 0.266017] pci 0000:00:05.0: PCI bridge to [bus 08-08] [ 0.266019] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 0.266022] pci 0000:00:05.0: bridge window [mem 0xd0800000-0xd08fffff] [ 0.266025] pci 0000:00:05.0: bridge window [mem 0xd0200000-0xd02fffff 64bit pref] [ 0.266029] pci 0000:00:06.0: PCI bridge to [bus 09-09] [ 0.266031] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff] [ 0.266034] pci 0000:00:06.0: bridge window [mem 0xd0500000-0xd05fffff] [ 0.266037] pci 0000:00:06.0: bridge window [mem pref disabled] [ 0.266040] pci 0000:00:14.4: PCI bridge to [bus 0a-0a] [ 0.266042] pci 0000:00:14.4: bridge window [io disabled] [ 0.266051] pci 0000:00:14.4: bridge window [mem disabled] [ 0.266054] pci 0000:00:14.4: bridge window [mem pref disabled] [ 0.266069] alloc irq_desc for 16 on node -1 [ 0.266071] alloc kstat_irqs on node -1 [ 0.266077] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.266080] pci 0000:00:04.0: setting latency timer to 64 [ 0.266085] alloc irq_desc for 17 on node -1 [ 0.266086] alloc kstat_irqs on node -1 [ 0.266090] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.266093] pci 0000:00:05.0: setting latency timer to 64 [ 0.266097] alloc irq_desc for 18 on node -1 [ 0.266099] alloc kstat_irqs on node -1 [ 0.266102] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.266105] pci 0000:00:06.0: setting latency timer to 64 [ 0.266113] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff] [ 0.266115] pci_bus 0000:00: resource 5 [mem 0x000d0000-0x000d1fff] [ 0.266117] pci_bus 0000:00: resource 6 [mem 0x000d2000-0x000d3fff] [ 0.266119] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d5fff] [ 0.266122] pci_bus 0000:00: resource 8 [mem 0x000d6000-0x000d7fff] [ 0.266124] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000d9fff] [ 0.266126] pci_bus 0000:00: resource 10 [mem 0x000da000-0x000dbfff] [ 0.266128] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000ddfff] [ 0.266131] pci_bus 0000:00: resource 12 [mem 0x000de000-0x000dffff] [ 0.266133] pci_bus 0000:00: resource 13 [mem 0xc0000000-0xdfffffff] [ 0.266135] pci_bus 0000:00: resource 14 [mem 0xf0000000-0xffffffff] [ 0.266138] pci_bus 0000:00: resource 15 [io 0x0000-0x0cf7] [ 0.266140] pci_bus 0000:00: resource 16 [io 0x0d00-0xffff] [ 0.266142] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff] [ 0.266144] pci_bus 0000:01: resource 1 [mem 0xd0300000-0xd04fffff] [ 0.266147] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.266149] pci_bus 0000:02: resource 0 [io 0xa000-0xbfff] [ 0.266151] pci_bus 0000:02: resource 1 [mem 0xd0600000-0xd07fffff] [ 0.266154] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref] [ 0.266156] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff] [ 0.266158] pci_bus 0000:08: resource 1 [mem 0xd0800000-0xd08fffff] [ 0.266161] pci_bus 0000:08: resource 2 [mem 0xd0200000-0xd02fffff 64bit pref] [ 0.266163] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] [ 0.266165] pci_bus 0000:09: resource 1 [mem 0xd0500000-0xd05fffff] [ 0.266168] pci_bus 0000:0a: resource 4 [mem 0x000a0000-0x000bffff] [ 0.266170] pci_bus 0000:0a: resource 5 [mem 0x000d0000-0x000d1fff] [ 0.266172] pci_bus 0000:0a: resource 6 [mem 0x000d2000-0x000d3fff] [ 0.266175] pci_bus 0000:0a: resource 7 [mem 0x000d4000-0x000d5fff] [ 0.266177] pci_bus 0000:0a: resource 8 [mem 0x000d6000-0x000d7fff] [ 0.266179] pci_bus 0000:0a: resource 9 [mem 0x000d8000-0x000d9fff] [ 0.266181] pci_bus 0000:0a: resource 10 [mem 0x000da000-0x000dbfff] [ 0.266184] pci_bus 0000:0a: resource 11 [mem 0x000dc000-0x000ddfff] [ 0.266186] pci_bus 0000:0a: resource 12 [mem 0x000de000-0x000dffff] [ 0.266188] pci_bus 0000:0a: resource 13 [mem 0xc0000000-0xdfffffff] [ 0.266190] pci_bus 0000:0a: resource 14 [mem 0xf0000000-0xffffffff] [ 0.266193] pci_bus 0000:0a: resource 15 [io 0x0000-0x0cf7] [ 0.266195] pci_bus 0000:0a: resource 16 [io 0x0d00-0xffff] [ 0.266224] NET: Registered protocol family 2 [ 0.266272] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.266451] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.266913] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.267158] TCP: Hash tables configured (established 131072 bind 65536) [ 0.267161] TCP reno registered [ 0.267163] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.267171] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.267241] NET: Registered protocol family 1 [ 0.267253] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.323037] pci 0000:01:05.0: Boot video device [ 0.323048] PCI: CLS 32 bytes, default 64 [ 0.323221] cpufreq-nforce2: No nForce2 chipset. [ 0.323243] Scanning for low memory corruption every 60 seconds [ 0.323349] audit: initializing netlink socket (disabled) [ 0.323358] type=2000 audit(1289484914.320:1): initialized [ 0.331973] highmem bounce pool size: 64 pages [ 0.331977] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.333054] VFS: Disk quotas dquot_6.5.2 [ 0.333101] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.333560] fuse init (API version 7.14) [ 0.333626] msgmni has been set to 1663 [ 0.333885] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.333888] io scheduler noop registered [ 0.333889] io scheduler deadline registered [ 0.333902] io scheduler cfq registered (default) [ 0.333993] pcieport 0000:00:04.0: setting latency timer to 64 [ 0.334015] alloc irq_desc for 40 on node -1 [ 0.334017] alloc kstat_irqs on node -1 [ 0.334024] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X [ 0.334075] pcieport 0000:00:05.0: setting latency timer to 64 [ 0.334093] alloc irq_desc for 41 on node -1 [ 0.334095] alloc kstat_irqs on node -1 [ 0.334099] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X [ 0.334140] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.334157] alloc irq_desc for 42 on node -1 [ 0.334159] alloc kstat_irqs on node -1 [ 0.334163] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X [ 0.334223] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.334505] pciehp 0000:00:04.0:pcie04: HPC vendor_id 1022 device_id 9604 ss_vid 17aa ss_did 21b8 [ 0.334528] pciehp 0000:00:04.0:pcie04: service driver pciehp loaded [ 0.334534] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.335330] ACPI: AC Adapter [ACAD] (on-line) [ 0.335384] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.335388] ACPI: Power Button [PWRB] [ 0.335436] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.335823] ACPI: Lid Switch [LID] [ 0.335879] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.335884] ACPI: Power Button [PWRF] [ 0.336059] ACPI: acpi_idle registered with cpuidle [ 0.336079] ACPI: processor limited to max C-state 1 [ 0.340649] ACPI Warning for \_TZ_.TZ00._PSL: Return Package type mismatch at index 2 - found [NULL Object Descriptor], expected Reference (20100428/nspredef-1059) [ 0.340659] ACPI: Expecting a [Reference] package element, found type 0 [ 0.340661] ACPI: Invalid passive threshold [ 0.341291] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.341300] ACPI: Thermal Zone [TZ00] (56 C) [ 0.341425] [Firmware Bug]: ERST: ERST table is invalid [ 0.341576] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.342639] brd: module loaded [ 0.343027] loop: module loaded [ 0.343383] Fixed MDIO Bus: probed [ 0.343408] PPP generic driver version 2.4.2 [ 0.343432] tun: Universal TUN/TAP device driver, 1.6 [ 0.343434] tun: (C) 1999-2004 Max Krasnyansky [ 0.343488] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.343540] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.343557] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.343581] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.343607] ehci_hcd 0000:00:12.2: debug port 1 [ 0.343627] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd0a07000 [ 0.343709] isapnp: Scanning for PnP cards... [ 0.398004] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.398096] hub 1-0:1.0: USB hub found [ 0.398100] hub 1-0:1.0: 5 ports detected [ 0.398164] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.398172] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.398195] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.398219] ehci_hcd 0000:00:13.2: debug port 1 [ 0.398228] ehci_hcd 0000:00:13.2: irq 17, io mem 0xd0a07400 [ 0.418980] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.419106] hub 2-0:1.0: USB hub found [ 0.419110] hub 2-0:1.0: 5 ports detected [ 0.419188] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.419206] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 0.419238] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 0.419264] ehci_hcd 0000:00:16.2: debug port 1 [ 0.419277] ehci_hcd 0000:00:16.2: irq 17, io mem 0xd0a07800 [ 0.425228] Freeing initrd memory: 10504k freed [ 0.431000] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 0.431133] hub 3-0:1.0: USB hub found [ 0.431137] hub 3-0:1.0: 4 ports detected [ 0.431204] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.431223] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.431239] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.431268] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 0.431296] ohci_hcd 0000:00:12.0: irq 18, io mem 0xd0a04000 [ 0.491068] hub 4-0:1.0: USB hub found [ 0.491079] hub 4-0:1.0: 5 ports detected [ 0.491146] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.491163] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.491191] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 0.491209] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd0a05000 [ 0.494651] ACPI: Battery Slot [BAT1] (battery present) [ 0.551067] hub 5-0:1.0: USB hub found [ 0.551077] hub 5-0:1.0: 5 ports detected [ 0.551142] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.551160] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 0.551187] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6 [ 0.551206] ohci_hcd 0000:00:16.0: irq 18, io mem 0xd0a06000 [ 0.611094] hub 6-0:1.0: USB hub found [ 0.611105] hub 6-0:1.0: 4 ports detected [ 0.611166] uhci_hcd: USB Universal Host Controller Interface driver [ 0.611235] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.615781] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.616956] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.616961] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.616964] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.616967] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.616969] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.617019] mice: PS/2 mouse device common for all mice [ 0.617112] rtc_cmos 00:04: RTC can wake from S4 [ 0.617141] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.617164] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.617246] device-mapper: uevent: version 1.0.3 [ 0.617332] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 0.617451] device-mapper: multipath: version 1.1.1 loaded [ 0.617453] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.617538] EISA: Probing bus 0 at eisa.0 [ 0.617540] EISA: Cannot allocate resource for mainboard [ 0.617542] Cannot allocate resource for EISA slot 1 [ 0.617544] Cannot allocate resource for EISA slot 2 [ 0.617545] Cannot allocate resource for EISA slot 3 [ 0.617547] Cannot allocate resource for EISA slot 4 [ 0.617548] Cannot allocate resource for EISA slot 5 [ 0.617550] Cannot allocate resource for EISA slot 6 [ 0.617551] Cannot allocate resource for EISA slot 7 [ 0.617553] Cannot allocate resource for EISA slot 8 [ 0.617554] EISA: Detected 0 cards. [ 0.617602] cpuidle: using governor ladder [ 0.617604] cpuidle: using governor menu [ 0.617849] TCP cubic registered [ 0.617949] NET: Registered protocol family 10 [ 0.618238] lo: Disabled Privacy Extensions [ 0.618432] NET: Registered protocol family 17 [ 0.618452] powernow-k8: Found 1 AMD Turion(tm) II P520 Dual-Core Processor (2 cpu cores) (version 2.20.00) [ 0.618489] powernow-k8: 0 : pstate 0 (2300 MHz) [ 0.618491] powernow-k8: 1 : pstate 1 (2100 MHz) [ 0.618493] powernow-k8: 2 : pstate 2 (1800 MHz) [ 0.618494] powernow-k8: 3 : pstate 3 (1500 MHz) [ 0.618496] powernow-k8: 4 : pstate 4 (800 MHz) [ 0.631710] Using IPI No-Shortcut mode [ 0.631777] PM: Resume from disk failed. [ 0.631786] registered taskstats version 1 [ 0.631995] Magic number: 2:62:283 [ 0.632067] rtc_cmos 00:04: setting system clock to 2010-11-11 14:15:16 UTC (1289484916) [ 0.632070] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.632071] EDD information not available. [ 0.664539] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.722769] isapnp: No Plug & Play device found [ 0.722785] Freeing unused kernel memory: 684k freed [ 0.724037] Write protecting the kernel text: 4932k [ 0.724070] Write protecting the kernel read-only data: 1980k [ 0.734992] usb 2-2: new high speed USB device using ehci_hcd and address 2 [ 0.741994] udev[77]: starting version 163 [ 0.800393] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.800412] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.800443] r8169 0000:08:00.0: setting latency timer to 64 [ 0.800476] alloc irq_desc for 43 on node -1 [ 0.800478] alloc kstat_irqs on node -1 [ 0.800490] r8169 0000:08:00.0: irq 43 for MSI/MSI-X [ 0.800901] r8169 0000:08:00.0: eth0: RTL8168d/8111d at 0xf809c000, c8:0a:a9:73:84:02, XID 081000c0 IRQ 43 [ 0.818933] ahci 0000:00:11.0: version 3.0 [ 0.818964] alloc irq_desc for 19 on node -1 [ 0.818966] alloc kstat_irqs on node -1 [ 0.818973] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.819011] alloc irq_desc for 44 on node -1 [ 0.819012] alloc kstat_irqs on node -1 [ 0.819022] ahci 0000:00:11.0: irq 44 for MSI/MSI-X [ 0.819102] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 3 ports 3 Gbps 0x13 impl SATA mode [ 0.819106] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs [ 0.819301] scsi0 : ahci [ 0.819386] scsi1 : ahci [ 0.819432] scsi2 : ahci [ 0.819475] scsi3 : ahci [ 0.819519] scsi4 : ahci [ 0.819783] ata1: SATA max UDMA/133 abar m1024@0xd0a07c00 port 0xd0a07d00 irq 44 [ 0.819787] ata2: SATA max UDMA/133 abar m1024@0xd0a07c00 port 0xd0a07d80 irq 44 [ 0.819789] ata3: DUMMY [ 0.819790] ata4: DUMMY [ 0.819792] ata5: SATA max UDMA/133 abar m1024@0xd0a07c00 port 0xd0a07f00 irq 44 [ 0.900662] Initializing USB Mass Storage driver... [ 0.900756] scsi5 : usb-storage 2-2:1.0 [ 0.900826] usbcore: registered new interface driver usb-storage [ 0.900828] USB Mass Storage support registered. [ 1.013054] usb 1-4: new high speed USB device using ehci_hcd and address 2 [ 1.140102] ata5: SATA link down (SStatus 0 SControl 300) [ 1.312069] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.312095] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.313777] ata2.00: ATAPI: MATSHITADVD-RAM UJ890, SB51, max UDMA/100 [ 1.316427] ata2.00: configured for UDMA/100 [ 1.360983] ata1.00: ATA-8: ST9320325AS, 0020LVM1, max UDMA/100 [ 1.360987] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.363039] ata1.00: configured for UDMA/100 [ 1.376222] scsi 0:0:0:0: Direct-Access ATA ST9320325AS 0020 PQ: 0 ANSI: 5 [ 1.376385] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.376475] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.376548] sd 0:0:0:0: [sda] Write Protect is off [ 1.376551] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.376579] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.376790] sda: [ 1.379314] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ890 SB51 PQ: 0 ANSI: 5 [ 1.380869] sda1 sda2 [ 1.416906] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.770134] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 1.770139] EXT4-fs (sda1): write access will be enabled during recovery [ 1.903490] scsi 5:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 1.904053] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 1.908577] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 2.238228] EXT4-fs (sda1): recovery complete [ 2.241105] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 11.864230] udev[418]: starting version 163 [ 11.911968] lp: driver loaded but no devices found [ 11.953322] ACPI: resource piix4_smbus [io 0x8040-0x8047] conflicts with ACPI region SMB0 [??? 0x00008040-0x0000804f flags 0x30] [ 11.953325] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.009948] Adding 6142972k swap on /dev/sda5. Priority:-1 extents:1 across:6142972k [ 12.016666] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 9602 [ 12.016671] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 12.016782] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.080657] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 12.081348] acpi device:2f: registered as cooling_device2 [ 12.081542] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2e/LNXVIDEO:02/input/input4 [ 12.081611] ACPI: Video Device [VGA2] (multi-head: yes rom: no post: no) [ 12.086541] Non-volatile memory driver v1.3 [ 12.094921] Linux video capture interface: v2.00 [ 12.106275] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b1cf) [ 12.111893] input: Integrated Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/input/input5 [ 12.112249] usbcore: registered new interface driver uvcvideo [ 12.112252] USB Video Class driver (v0.1.0) [ 12.189677] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.208255] type=1400 audit(1289456128.069:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=715 comm="apparmor_parser" [ 12.208514] type=1400 audit(1289456128.069:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=715 comm="apparmor_parser" [ 12.208662] type=1400 audit(1289456128.069:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=715 comm="apparmor_parser" [ 12.234214] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 12.234217] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 12.234219] thinkpad_acpi: ThinkPad BIOS 82ET60WW (2.01 ), EC 82HT26WW-1.172000 [ 12.234221] thinkpad_acpi: Lenovo ThinkPad Edge, model 030223U [ 12.235732] thinkpad_acpi: detected a 16-level brightness capable ThinkPad [ 12.241541] thinkpad_acpi: radio switch found; radios are enabled [ 12.241578] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode [ 12.241596] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 12.241598] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 12.243339] thinkpad_acpi: asked for hotkey mask 0x04000070, but firmware forced it to 0x00000070 [ 12.254129] hda_codec: ALC269: BIOS auto-probing. [ 12.255266] Registered led device: tpacpi::thinklight [ 12.255286] Registered led device: tpacpi::power [ 12.255308] Registered led device: tpacpi::standby [ 12.255321] Registered led device: tpacpi::thinkvantage [ 12.259295] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 12.259333] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 12.269122] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. [ 12.269220] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 12.275287] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 [ 12.363368] cfg80211: Calling CRDA to update world regulatory domain [ 12.463428] rtllib_crypt: registered algorithm 'NULL' [ 12.463431] rtllib_crypt: registered algorithm 'TKIP' [ 12.463433] rtllib_crypt: registered algorithm 'CCMP' [ 12.463435] rtllib_crypt: registered algorithm 'WEP' [ 12.463436] [ 12.463437] Linux kernel driver for RTL8192 based WLAN cards [ 12.463438] Copyright (c) 2007-2008, Realsil Wlan Driver [ 12.463470] rtl819xSE 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 12.463475] rtl819xSE 0000:09:00.0: setting latency timer to 64 [ 12.463836] Memory mapped space start: 0xd0500000 [ 12.463870] Adapter(8192SE) is found - DeviceID=8172 [ 12.465564] GetPciBusInfo(): Find Device(10EC:8172) bus=9 dev=0, func=0 [ 12.465635] GetPciBridegInfo : Find Device(1022:9606) bus=0 dev=6, func=0 [ 12.465637] Pci Bridge Vendor is found index: 2 [ 12.465639] Pci Bridge Vendor is 1022 [ 12.470396] =========>dm_InitRateAdaptiveMask: bUseRAMask=0 [ 12.487818] rtl8192: wireless switch is on [ 12.546858] cfg80211: World regulatory domain updated: [ 12.546862] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.546865] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.546867] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.546870] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.546872] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.546874] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.584399] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.673885] type=1400 audit(1289456128.537:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=937 comm="apparmor_parser" [ 12.673901] type=1400 audit(1289456128.537:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=938 comm="apparmor_parser" [ 12.674161] type=1400 audit(1289456128.537:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=938 comm="apparmor_parser" [ 12.674310] type=1400 audit(1289456128.537:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=938 comm="apparmor_parser" [ 12.676321] type=1400 audit(1289456128.537:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=941 comm="apparmor_parser" [ 12.676553] type=1400 audit(1289456128.537:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=939 comm="apparmor_parser" [ 12.676661] type=1400 audit(1289456128.537:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=941 comm="apparmor_parser" [ 12.779979] r8169 0000:08:00.0: eth0: link up [ 12.779986] r8169 0000:08:00.0: eth0: link up [ 13.034233] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b1/0xb40000/0xa0400 [ 13.034237] Synaptics: Clickpad mode enabled [ 13.034241] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 13.089897] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 13.207735] ppdev: user-space parallel port driver [ 13.278748] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 13.278754] ===>rtllib_start_scan() [ 13.278810] =====>rtl8192_set_chan()====ch:2 [ 13.289113] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 13.322691] =====>rtl8192_set_chan()====ch:1 [ 13.436046] =====>rtl8192_set_chan()====ch:2 [ 13.443972] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 13.462429] Linux agpgart interface v0.103 [ 13.481677] [drm] Initialized drm 1.1.0 20060810 [ 13.512957] [drm] radeon defaulting to kernel modesetting. [ 13.512960] [drm] radeon kernel modesetting enabled. [ 13.513022] radeon 0000:01:05.0: setting latency timer to 64 [ 13.515108] [drm] initializing kernel modesetting (RS880 0x1002:0x9712). [ 13.515620] [drm] register mmio base: 0xD0400000 [ 13.515623] [drm] register mmio size: 65536 [ 13.515725] ATOM BIOS: Lenovo_LDNote [ 13.515736] [drm] Clocks initialized ! [ 13.515745] radeon 0000:01:05.0: VRAM: 256M 0xC0000000 - 0xCFFFFFFF (256M used) [ 13.515748] radeon 0000:01:05.0: GTT: 512M 0xA0000000 - 0xBFFFFFFF [ 13.515970] [drm] Detected VRAM RAM=256M, BAR=256M [ 13.515974] [drm] RAM width 32bits DDR [ 13.516042] [TTM] Zone kernel: Available graphics memory: 431552 kiB. [ 13.516046] [TTM] Zone highmem: Available graphics memory: 1417952 kiB. [ 13.516049] [TTM] Initializing pool allocator. [ 13.516067] [drm] radeon: 256M of VRAM memory ready [ 13.516069] [drm] radeon: 512M of GTT memory ready. [ 13.516106] [drm] radeon: irq initialized. [ 13.516108] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 13.516580] [drm] Loading RS780 Microcode [ 13.548071] =====>rtl8192_set_chan()====ch:3 [ 13.558832] [drm] ring test succeeded in 1 usecs [ 13.558982] [drm] radeon: ib pool ready. [ 13.559111] [drm] ib test succeeded in 0 usecs [ 13.559113] [drm] Enabling audio support [ 13.559302] [drm] Unknown TV standard; defaulting to NTSC [ 13.560233] [drm] Radeon Display Connectors [ 13.560235] [drm] Connector 0: [ 13.560236] [drm] VGA [ 13.560239] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 13.560241] [drm] Encoders: [ 13.560242] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 13.560244] [drm] Connector 1: [ 13.560245] [drm] LVDS [ 13.560247] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 13.560248] [drm] Encoders: [ 13.560250] [drm] LCD1: INTERNAL_KLDSCP_LVTMA [ 13.560251] [drm] Connector 2: [ 13.560252] [drm] HDMI-A [ 13.560254] [drm] HPD1 [ 13.560256] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c [ 13.560257] [drm] Encoders: [ 13.560258] [drm] DFP1: INTERNAL_UNIPHY [ 13.616793] [drm] radeon: power management initialized [ 13.660069] =====>rtl8192_set_chan()====ch:4 [ 13.698318] [drm] fb mappable at 0xC0141000 [ 13.698321] [drm] vram apper at 0xC0000000 [ 13.698323] [drm] size 4325376 [ 13.698324] [drm] fb depth is 24 [ 13.698325] [drm] pitch is 5632 [ 13.698981] Console: switching to colour frame buffer device 170x48 [ 13.698987] fb0: radeondrmfb frame buffer device [ 13.698989] drm: registered panic notifier [ 13.698991] Slow work thread pool: Starting up [ 13.699030] Slow work thread pool: Ready [ 13.699036] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:05.0 on minor 0 [ 13.773696] =====>rtl8192_set_chan()====ch:5 [ 13.885281] =====>rtl8192_set_chan()====ch:6 [ 13.996060] =====>rtl8192_set_chan()====ch:7 [ 14.108094] =====>rtl8192_set_chan()====ch:8 [ 14.220066] =====>rtl8192_set_chan()====ch:9 [ 14.332090] =====>rtl8192_set_chan()====ch:10 [ 14.444045] =====>rtl8192_set_chan()====ch:11 [ 14.556088] =====>rtl8192_set_chan()====ch:12 [ 14.631542] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 14.672080] =====>rtl8192_set_chan()====ch:13 [ 14.785768] ===>rtllib_wx_set_power(): power disable [ 16.335902] psmouse serio5: ID: 10 00 64 [ 16.389995] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 17.121159] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 17.135806] ===>rtllib_wx_set_power(): power disable [ 20.642417] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 20.914991] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input8 [ 23.464045] eth0: no IPv6 routers present [ 33.260608] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 33.260870] =====>rtl8192_set_chan()====ch:1 [ 33.372074] =====>rtl8192_set_chan()====ch:2 [ 33.484070] =====>rtl8192_set_chan()====ch:3 [ 33.596066] =====>rtl8192_set_chan()====ch:4 [ 33.708062] =====>rtl8192_set_chan()====ch:5 [ 33.820065] =====>rtl8192_set_chan()====ch:6 [ 33.932053] =====>rtl8192_set_chan()====ch:7 [ 34.044061] =====>rtl8192_set_chan()====ch:8 [ 34.156071] =====>rtl8192_set_chan()====ch:9 [ 34.268041] =====>rtl8192_set_chan()====ch:10 [ 34.380027] =====>rtl8192_set_chan()====ch:11 [ 34.492033] =====>rtl8192_set_chan()====ch:12 [ 34.604036] =====>rtl8192_set_chan()====ch:13 [ 63.260739] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 63.260851] =====>rtl8192_set_chan()====ch:1 [ 63.372059] =====>rtl8192_set_chan()====ch:2 [ 63.484055] =====>rtl8192_set_chan()====ch:3 [ 63.596049] =====>rtl8192_set_chan()====ch:4 [ 63.708046] =====>rtl8192_set_chan()====ch:5 [ 63.820079] =====>rtl8192_set_chan()====ch:6 [ 63.932040] =====>rtl8192_set_chan()====ch:7 [ 64.044087] =====>rtl8192_set_chan()====ch:8 [ 64.156084] =====>rtl8192_set_chan()====ch:9 [ 64.268079] =====>rtl8192_set_chan()====ch:10 [ 64.380074] =====>rtl8192_set_chan()====ch:11 [ 64.492072] =====>rtl8192_set_chan()====ch:12 [ 64.604074] =====>rtl8192_set_chan()====ch:13 [ 103.265390] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 103.265531] =====>rtl8192_set_chan()====ch:1 [ 103.376174] =====>rtl8192_set_chan()====ch:2 [ 103.488170] =====>rtl8192_set_chan()====ch:3 [ 103.600102] =====>rtl8192_set_chan()====ch:4 [ 103.712097] =====>rtl8192_set_chan()====ch:5 [ 103.824165] =====>rtl8192_set_chan()====ch:6 [ 103.936152] =====>rtl8192_set_chan()====ch:7 [ 104.048169] =====>rtl8192_set_chan()====ch:8 [ 104.160175] =====>rtl8192_set_chan()====ch:9 [ 104.272161] =====>rtl8192_set_chan()====ch:10 [ 104.384065] =====>rtl8192_set_chan()====ch:11 [ 104.496150] =====>rtl8192_set_chan()====ch:12 [ 104.608117] =====>rtl8192_set_chan()====ch:13 [ 153.261656] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 153.261882] =====>rtl8192_set_chan()====ch:1 [ 153.372124] =====>rtl8192_set_chan()====ch:2 [ 153.484102] =====>rtl8192_set_chan()====ch:3 [ 153.596164] =====>rtl8192_set_chan()====ch:4 [ 153.708159] =====>rtl8192_set_chan()====ch:5 [ 153.820093] =====>rtl8192_set_chan()====ch:6 [ 153.933164] =====>rtl8192_set_chan()====ch:7 [ 154.044152] =====>rtl8192_set_chan()====ch:8 [ 154.156094] =====>rtl8192_set_chan()====ch:9 [ 154.268073] =====>rtl8192_set_chan()====ch:10 [ 154.380060] =====>rtl8192_set_chan()====ch:11 [ 154.492066] =====>rtl8192_set_chan()====ch:12 [ 154.604063] =====>rtl8192_set_chan()====ch:13 [ 213.262009] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 213.262187] =====>rtl8192_set_chan()====ch:1 [ 213.372128] =====>rtl8192_set_chan()====ch:2 [ 213.484054] =====>rtl8192_set_chan()====ch:3 [ 213.596168] =====>rtl8192_set_chan()====ch:4 [ 213.708163] =====>rtl8192_set_chan()====ch:5 [ 213.820096] =====>rtl8192_set_chan()====ch:6 [ 213.932094] =====>rtl8192_set_chan()====ch:7 [ 214.044161] =====>rtl8192_set_chan()====ch:8 [ 214.156260] =====>rtl8192_set_chan()====ch:9 [ 214.268080] =====>rtl8192_set_chan()====ch:10 [ 214.380143] =====>rtl8192_set_chan()====ch:11 [ 214.492072] =====>rtl8192_set_chan()====ch:12 [ 214.604067] =====>rtl8192_set_chan()====ch:13 [ 268.288400] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1 [ 268.288577] =====>rtl8192_set_chan()====ch:1 [ 268.441421] =====>rtl8192_set_chan()====ch:2 [ 268.553017] =====>rtl8192_set_chan()====ch:3 [ 268.665026] =====>rtl8192_set_chan()====ch:4 [ 268.776026] =====>rtl8192_set_chan()====ch:5 [ 268.888059] =====>rtl8192_set_chan()====ch:6 [ 269.004072] =====>rtl8192_set_chan()====ch:7 [ 269.120058] =====>rtl8192_set_chan()====ch:8 [ 269.236024] =====>rtl8192_set_chan()====ch:9 [ 269.352022] =====>rtl8192_set_chan()====ch:10 [ 269.464059] =====>rtl8192_set_chan()====ch:11 [ 269.579602] =====>rtl8192_set_chan()====ch:12 [ 269.692149] =====>rtl8192_set_chan()====ch:13 [ 269.805485] alg name:WEP [ 269.822347] ===========>set_swcam():EntryNo is 0,KeyIndex is 0,KeyType is 1,is_mesh is 0 [ 269.822440] ===>rtllib_start_scan() [ 269.822461] Linking with ZTE-57095C,channel:6, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x406 [ 269.822467] Linking with ZTE-57095C,channel:6, qos:0, myHT:1, networkHT:0, mode:6 cur_net.flags:0x406 [ 269.822590] ===>rtllib_associate_procedure_wq(), chan:6 [ 269.822592] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 [ 269.822594] =====>rtl8192_set_chan()====ch:6 [ 269.835473] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 269.837459] Associated successfully [ 269.837465] normal associate [ 269.837479] Using G rates:108 [ 269.837485] Successfully associated, ht not enabled(0, 0) [ 269.837491] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 269.837498] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 269.839062] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 269.868380] DHCP pkt src port:68, dest port:67!! [ 271.792553] dm_check_edca_turbo():iot peer is unknown, bssid:00:15:eb:57:09:5c [ 273.133815] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 273.188211] =====>rtl8192_set_chan()====ch:1 [ 273.301117] =====>rtl8192_set_chan()====ch:2 [ 273.412123] =====>rtl8192_set_chan()====ch:3 [ 273.524132] =====>rtl8192_set_chan()====ch:4 [ 273.636139] =====>rtl8192_set_chan()====ch:5 [ 273.749149] =====>rtl8192_set_chan()====ch:6 [ 273.860176] =====>rtl8192_set_chan()====ch:7 [ 273.973131] =====>rtl8192_set_chan()====ch:8 [ 274.084132] =====>rtl8192_set_chan()====ch:9 [ 274.196843] =====>rtl8192_set_chan()====ch:10 [ 274.309153] =====>rtl8192_set_chan()====ch:11 [ 274.420146] =====>rtl8192_set_chan()====ch:12 [ 274.532166] =====>rtl8192_set_chan()====ch:13 [ 274.645143] =====>rtl8192_set_chan()====ch:6 [ 274.655365] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 274.655374] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 280.360104] wlan0: no IPv6 routers present [ 313.140458] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 313.196263] =====>rtl8192_set_chan()====ch:1 [ 313.308140] =====>rtl8192_set_chan()====ch:2 [ 313.420162] =====>rtl8192_set_chan()====ch:3 [ 313.532167] =====>rtl8192_set_chan()====ch:4 [ 313.644098] =====>rtl8192_set_chan()====ch:5 [ 313.756159] =====>rtl8192_set_chan()====ch:6 [ 313.868235] =====>rtl8192_set_chan()====ch:7 [ 313.980085] =====>rtl8192_set_chan()====ch:8 [ 314.092151] =====>rtl8192_set_chan()====ch:9 [ 314.204163] =====>rtl8192_set_chan()====ch:10 [ 314.316142] =====>rtl8192_set_chan()====ch:11 [ 314.428289] =====>rtl8192_set_chan()====ch:12 [ 314.540156] =====>rtl8192_set_chan()====ch:13 [ 314.653174] =====>rtl8192_set_chan()====ch:6 [ 314.663339] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 314.663347] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 365.500170] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 365.500335] =====>rtl8192_hard_start_xmit() retrun :0:1:0 [ 365.500351] notify_wx_assoc_event(): Tell user space disconnected [ 368.664583] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 368.664597] ===>rtllib_start_scan() [ 368.664633] =====>rtl8192_set_chan()====ch:2 [ 368.665353] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 368.688049] =====>rtl8192_set_chan()====ch:1 [ 368.800177] =====>rtl8192_set_chan()====ch:2 [ 368.912115] =====>rtl8192_set_chan()====ch:3 [ 369.024180] =====>rtl8192_set_chan()====ch:4 [ 369.136178] =====>rtl8192_set_chan()====ch:5 [ 369.248116] =====>rtl8192_set_chan()====ch:6 [ 369.360081] =====>rtl8192_set_chan()====ch:7 [ 369.472160] =====>rtl8192_set_chan()====ch:8 [ 369.584198] =====>rtl8192_set_chan()====ch:9 [ 369.696077] =====>rtl8192_set_chan()====ch:10 [ 369.808083] =====>rtl8192_set_chan()====ch:11 [ 369.921066] =====>rtl8192_set_chan()====ch:12 [ 370.033168] =====>rtl8192_set_chan()====ch:13 [ 370.178478] =====>rtl8192_set_chan()====ch:1 [ 370.292164] =====>rtl8192_set_chan()====ch:2 [ 370.405163] =====>rtl8192_set_chan()====ch:3 [ 370.517147] =====>rtl8192_set_chan()====ch:4 [ 370.628168] =====>rtl8192_set_chan()====ch:5 [ 370.740166] =====>rtl8192_set_chan()====ch:6 [ 370.852534] =====>rtl8192_set_chan()====ch:7 [ 370.964175] =====>rtl8192_set_chan()====ch:8 [ 371.076178] =====>rtl8192_set_chan()====ch:9 [ 371.188192] =====>rtl8192_set_chan()====ch:10 [ 371.300534] =====>rtl8192_set_chan()====ch:11 [ 371.413166] =====>rtl8192_set_chan()====ch:12 [ 371.524167] =====>rtl8192_set_chan()====ch:13 [ 371.637958] alg name:WEP [ 371.638586] ===========>set_swcam():EntryNo is 0,KeyIndex is 0,KeyType is 1,is_mesh is 0 [ 371.638718] ===>rtllib_start_scan() [ 371.638737] =====>rtl8192_set_chan()====ch:3 [ 371.648788] Linking with ZTE-57095C,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406 [ 371.648907] Linking with ZTE-57095C,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406 [ 371.648958] ===>rtllib_associate_procedure_wq(), chan:6 [ 371.648960] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 [ 371.648962] =====>rtl8192_set_chan()====ch:6 [ 371.660826] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 371.662906] Associated successfully [ 371.662915] normal associate [ 371.662932] Using G rates:108 [ 371.662937] Successfully associated, ht not enabled(0, 0) [ 371.662943] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 371.662951] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 371.664542] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 371.692710] DHCP pkt src port:68, dest port:67!! [ 377.448257] =====>rtl8192_hard_start_xmit() retrun :0:1:0 [ 377.448274] notify_wx_assoc_event(): Tell user space disconnected [ 695.503219] show_signal_msg: 9 callbacks suppressed [ 695.503225] gnome-screensav[2048]: segfault at 4 ip 009f95a0 sp bf93ca4c error 4 in libGL.so.1.2[98c000+b4000] [ 3845.747938] r8169 0000:08:00.0: eth0: link down [ 3847.326953] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 3847.326967] ===>rtllib_start_scan() [ 3847.326999] =====>rtl8192_set_chan()====ch:2 [ 3847.329127] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3847.360273] =====>rtl8192_set_chan()====ch:1 [ 3847.472183] =====>rtl8192_set_chan()====ch:2 [ 3847.584182] =====>rtl8192_set_chan()====ch:3 [ 3847.696182] =====>rtl8192_set_chan()====ch:4 [ 3847.808122] =====>rtl8192_set_chan()====ch:5 [ 3847.920120] =====>rtl8192_set_chan()====ch:6 [ 3848.032097] =====>rtl8192_set_chan()====ch:7 [ 3848.145157] =====>rtl8192_set_chan()====ch:8 [ 3848.256173] =====>rtl8192_set_chan()====ch:9 [ 3848.368460] =====>rtl8192_set_chan()====ch:10 [ 3848.480170] =====>rtl8192_set_chan()====ch:11 [ 3848.592168] =====>rtl8192_set_chan()====ch:12 [ 3848.704169] =====>rtl8192_set_chan()====ch:13 [ 3852.341872] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 3852.342006] =====>rtl8192_set_chan()====ch:1 [ 3852.452178] =====>rtl8192_set_chan()====ch:2 [ 3852.564184] =====>rtl8192_set_chan()====ch:3 [ 3852.676184] =====>rtl8192_set_chan()====ch:4 [ 3852.788129] =====>rtl8192_set_chan()====ch:5 [ 3852.904055] =====>rtl8192_set_chan()====ch:6 [ 3853.016170] =====>rtl8192_set_chan()====ch:7 [ 3853.128170] =====>rtl8192_set_chan()====ch:8 [ 3853.240164] =====>rtl8192_set_chan()====ch:9 [ 3853.352171] =====>rtl8192_set_chan()====ch:10 [ 3853.464132] =====>rtl8192_set_chan()====ch:11 [ 3853.576171] =====>rtl8192_set_chan()====ch:12 [ 3853.688104] =====>rtl8192_set_chan()====ch:13 [ 3856.906342] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 3856.906357] ===>rtllib_start_scan() [ 3856.906390] =====>rtl8192_set_chan()====ch:2 [ 3856.909147] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3856.940138] =====>rtl8192_set_chan()====ch:1 [ 3857.052171] =====>rtl8192_set_chan()====ch:2 [ 3857.165150] =====>rtl8192_set_chan()====ch:3 [ 3857.276169] =====>rtl8192_set_chan()====ch:4 [ 3857.389164] =====>rtl8192_set_chan()====ch:5 [ 3857.500168] =====>rtl8192_set_chan()====ch:6 [ 3857.612105] =====>rtl8192_set_chan()====ch:7 [ 3857.724373] =====>rtl8192_set_chan()====ch:8 [ 3857.837168] =====>rtl8192_set_chan()====ch:9 [ 3857.948070] =====>rtl8192_set_chan()====ch:10 [ 3858.060169] =====>rtl8192_set_chan()====ch:11 [ 3858.172186] =====>rtl8192_set_chan()====ch:12 [ 3858.285181] =====>rtl8192_set_chan()====ch:13 [ 3858.426626] =====>rtl8192_set_chan()====ch:1 [ 3858.536035] =====>rtl8192_set_chan()====ch:2 [ 3858.648183] =====>rtl8192_set_chan()====ch:3 [ 3858.760246] =====>rtl8192_set_chan()====ch:4 [ 3858.872180] =====>rtl8192_set_chan()====ch:5 [ 3858.984177] =====>rtl8192_set_chan()====ch:6 [ 3859.096184] =====>rtl8192_set_chan()====ch:7 [ 3859.208184] =====>rtl8192_set_chan()====ch:8 [ 3859.320183] =====>rtl8192_set_chan()====ch:9 [ 3859.432184] =====>rtl8192_set_chan()====ch:10 [ 3859.544178] =====>rtl8192_set_chan()====ch:11 [ 3859.656183] =====>rtl8192_set_chan()====ch:12 [ 3859.768162] =====>rtl8192_set_chan()====ch:13 [ 3859.881896] alg name:WEP [ 3859.882539] ===========>set_swcam():EntryNo is 0,KeyIndex is 0,KeyType is 1,is_mesh is 0 [ 3859.882667] ===>rtllib_start_scan() [ 3859.882685] =====>rtl8192_set_chan()====ch:3 [ 3859.892752] Linking with ZTE-57095C,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406 [ 3859.892871] ===>rtllib_associate_procedure_wq(), chan:6 [ 3859.892877] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 [ 3859.892883] =====>rtl8192_set_chan()====ch:6 [ 3859.903021] Linking with ZTE-57095C,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406 [ 3859.903164] ===>rtllib_associate_procedure_wq(), chan:6 [ 3859.903170] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 [ 3859.903176] =====>rtl8192_set_chan()====ch:6 [ 3859.915068] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 3859.917148] Associated successfully [ 3859.917156] normal associate [ 3859.917174] Using G rates:108 [ 3859.917179] Successfully associated, ht not enabled(0, 0) [ 3859.917185] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 3859.917192] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 3859.918752] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3859.945469] DHCP pkt src port:68, dest port:67!! [ 3870.000151] wlan0: no IPv6 routers present [ 3877.137923] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 3877.192233] =====>rtl8192_set_chan()====ch:1 [ 3877.304192] =====>rtl8192_set_chan()====ch:2 [ 3877.416204] =====>rtl8192_set_chan()====ch:3 [ 3877.528183] =====>rtl8192_set_chan()====ch:4 [ 3877.640175] =====>rtl8192_set_chan()====ch:5 [ 3877.752214] =====>rtl8192_set_chan()====ch:6 [ 3877.865164] =====>rtl8192_set_chan()====ch:7 [ 3877.976107] =====>rtl8192_set_chan()====ch:8 [ 3878.088178] =====>rtl8192_set_chan()====ch:9 [ 3878.200147] =====>rtl8192_set_chan()====ch:10 [ 3878.312187] =====>rtl8192_set_chan()====ch:11 [ 3878.424124] =====>rtl8192_set_chan()====ch:12 [ 3878.536188] =====>rtl8192_set_chan()====ch:13 [ 3878.648142] =====>rtl8192_set_chan()====ch:6 [ 3878.658309] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 3878.658318] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 3917.138077] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 3917.192305] =====>rtl8192_set_chan()====ch:1 [ 3917.304116] =====>rtl8192_set_chan()====ch:2 [ 3917.416185] =====>rtl8192_set_chan()====ch:3 [ 3917.528185] =====>rtl8192_set_chan()====ch:4 [ 3917.640175] =====>rtl8192_set_chan()====ch:5 [ 3917.752177] =====>rtl8192_set_chan()====ch:6 [ 3917.864163] =====>rtl8192_set_chan()====ch:7 [ 3917.976263] =====>rtl8192_set_chan()====ch:8 [ 3918.088210] =====>rtl8192_set_chan()====ch:9 [ 3918.200175] =====>rtl8192_set_chan()====ch:10 [ 3918.312194] =====>rtl8192_set_chan()====ch:11 [ 3918.424227] =====>rtl8192_set_chan()====ch:12 [ 3918.536171] =====>rtl8192_set_chan()====ch:13 [ 3918.648120] =====>rtl8192_set_chan()====ch:6 [ 3918.658302] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 3918.658310] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 3977.137425] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 3977.193287] =====>rtl8192_set_chan()====ch:1 [ 3977.304175] =====>rtl8192_set_chan()====ch:2 [ 3977.416174] =====>rtl8192_set_chan()====ch:3 [ 3977.529093] =====>rtl8192_set_chan()====ch:4 [ 3977.640178] =====>rtl8192_set_chan()====ch:5 [ 3977.752181] =====>rtl8192_set_chan()====ch:6 [ 3977.864182] =====>rtl8192_set_chan()====ch:7 [ 3977.976175] =====>rtl8192_set_chan()====ch:8 [ 3978.088181] =====>rtl8192_set_chan()====ch:9 [ 3978.200200] =====>rtl8192_set_chan()====ch:10 [ 3978.312178] =====>rtl8192_set_chan()====ch:11 [ 3978.424174] =====>rtl8192_set_chan()====ch:12 [ 3978.536177] =====>rtl8192_set_chan()====ch:13 [ 3978.648152] =====>rtl8192_set_chan()====ch:6 [ 3978.658333] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 3978.658342] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 4057.139674] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 4057.139837] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4057.192308] =====>rtl8192_set_chan()====ch:1 [ 4057.304266] =====>rtl8192_set_chan()====ch:2 [ 4057.416201] =====>rtl8192_set_chan()====ch:3 [ 4057.528195] =====>rtl8192_set_chan()====ch:4 [ 4057.640186] =====>rtl8192_set_chan()====ch:5 [ 4057.752214] =====>rtl8192_set_chan()====ch:6 [ 4057.864168] =====>rtl8192_set_chan()====ch:7 [ 4057.976207] =====>rtl8192_set_chan()====ch:8 [ 4058.088211] =====>rtl8192_set_chan()====ch:9 [ 4058.200192] =====>rtl8192_set_chan()====ch:10 [ 4058.312219] =====>rtl8192_set_chan()====ch:11 [ 4058.424123] =====>rtl8192_set_chan()====ch:12 [ 4058.536189] =====>rtl8192_set_chan()====ch:13 [ 4058.648184] =====>rtl8192_set_chan()====ch:6 [ 4058.658364] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4058.658372] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 4157.137151] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 4157.137310] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4157.192318] =====>rtl8192_set_chan()====ch:1 [ 4157.304204] =====>rtl8192_set_chan()====ch:2 [ 4157.416230] =====>rtl8192_set_chan()====ch:3 [ 4157.528195] =====>rtl8192_set_chan()====ch:4 [ 4157.640148] =====>rtl8192_set_chan()====ch:5 [ 4157.752190] =====>rtl8192_set_chan()====ch:6 [ 4157.864128] =====>rtl8192_set_chan()====ch:7 [ 4157.976129] =====>rtl8192_set_chan()====ch:8 [ 4158.088202] =====>rtl8192_set_chan()====ch:9 [ 4158.200110] =====>rtl8192_set_chan()====ch:10 [ 4158.312205] =====>rtl8192_set_chan()====ch:11 [ 4158.424215] =====>rtl8192_set_chan()====ch:12 [ 4158.536198] =====>rtl8192_set_chan()====ch:13 [ 4158.648168] =====>rtl8192_set_chan()====ch:6 [ 4158.658342] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4158.658351] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 4171.327117] gnome-screensav[2514]: segfault at 4 ip 003315a0 sp bfe8bafc error 4 in libGL.so.1.2[2c4000+b4000] [ 4277.137051] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 4277.137209] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4277.192303] =====>rtl8192_set_chan()====ch:1 [ 4277.304152] =====>rtl8192_set_chan()====ch:2 [ 4277.416183] =====>rtl8192_set_chan()====ch:3 [ 4277.528183] =====>rtl8192_set_chan()====ch:4 [ 4277.640129] =====>rtl8192_set_chan()====ch:5 [ 4277.752183] =====>rtl8192_set_chan()====ch:6 [ 4277.864180] =====>rtl8192_set_chan()====ch:7 [ 4277.976137] =====>rtl8192_set_chan()====ch:8 [ 4278.088184] =====>rtl8192_set_chan()====ch:9 [ 4278.200149] =====>rtl8192_set_chan()====ch:10 [ 4278.312186] =====>rtl8192_set_chan()====ch:11 [ 4278.424185] =====>rtl8192_set_chan()====ch:12 [ 4278.536182] =====>rtl8192_set_chan()====ch:13 [ 4278.648099] =====>rtl8192_set_chan()====ch:6 [ 4278.658277] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4278.658286] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 4386.980121] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 4386.980286] =====>rtl8192_hard_start_xmit() retrun :0:1:0 [ 4386.980304] notify_wx_assoc_event(): Tell user space disconnected [ 4388.232991] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 4388.233020] ===>rtllib_start_scan() [ 4388.233055] =====>rtl8192_set_chan()====ch:2 [ 4388.240658] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4388.263829] =====>rtl8192_set_chan()====ch:1 [ 4388.376149] =====>rtl8192_set_chan()====ch:2 [ 4388.488182] =====>rtl8192_set_chan()====ch:3 [ 4388.600181] =====>rtl8192_set_chan()====ch:4 [ 4388.712181] =====>rtl8192_set_chan()====ch:5 [ 4388.824177] =====>rtl8192_set_chan()====ch:6 [ 4388.936182] =====>rtl8192_set_chan()====ch:7 [ 4389.048122] =====>rtl8192_set_chan()====ch:8 [ 4389.160183] =====>rtl8192_set_chan()====ch:9 [ 4389.272144] =====>rtl8192_set_chan()====ch:10 [ 4389.384184] =====>rtl8192_set_chan()====ch:11 [ 4389.496182] =====>rtl8192_set_chan()====ch:12 [ 4389.608181] =====>rtl8192_set_chan()====ch:13 [ 4389.761833] =====>rtl8192_set_chan()====ch:1 [ 4389.872184] =====>rtl8192_set_chan()====ch:2 [ 4389.984178] =====>rtl8192_set_chan()====ch:3 [ 4390.096179] =====>rtl8192_set_chan()====ch:4 [ 4390.208187] =====>rtl8192_set_chan()====ch:5 [ 4390.320133] =====>rtl8192_set_chan()====ch:6 [ 4390.432189] =====>rtl8192_set_chan()====ch:7 [ 4390.544094] =====>rtl8192_set_chan()====ch:8 [ 4390.656080] =====>rtl8192_set_chan()====ch:9 [ 4390.768164] =====>rtl8192_set_chan()====ch:10 [ 4390.880189] =====>rtl8192_set_chan()====ch:11 [ 4390.992120] =====>rtl8192_set_chan()====ch:12 [ 4391.104124] =====>rtl8192_set_chan()====ch:13 [ 4392.801964] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 4392.801982] ===>rtllib_start_scan() [ 4392.802022] =====>rtl8192_set_chan()====ch:2 [ 4392.802669] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4392.831077] =====>rtl8192_set_chan()====ch:1 [ 4392.944138] =====>rtl8192_set_chan()====ch:2 [ 4393.056127] =====>rtl8192_set_chan()====ch:3 [ 4393.168183] =====>rtl8192_set_chan()====ch:4 [ 4393.280182] =====>rtl8192_set_chan()====ch:5 [ 4393.392183] =====>rtl8192_set_chan()====ch:6 [ 4393.504101] =====>rtl8192_set_chan()====ch:7 [ 4393.617154] =====>rtl8192_set_chan()====ch:8 [ 4393.728170] =====>rtl8192_set_chan()====ch:9 [ 4393.840171] =====>rtl8192_set_chan()====ch:10 [ 4393.952105] =====>rtl8192_set_chan()====ch:11 [ 4394.064130] =====>rtl8192_set_chan()====ch:12 [ 4394.176154] =====>rtl8192_set_chan()====ch:13 [ 4394.311691] =====>rtl8192_set_chan()====ch:1 [ 4394.425154] =====>rtl8192_set_chan()====ch:2 [ 4394.537070] =====>rtl8192_set_chan()====ch:3 [ 4394.649155] =====>rtl8192_set_chan()====ch:4 [ 4394.761169] =====>rtl8192_set_chan()====ch:5 [ 4394.872169] =====>rtl8192_set_chan()====ch:6 [ 4394.984173] =====>rtl8192_set_chan()====ch:7 [ 4395.096169] =====>rtl8192_set_chan()====ch:8 [ 4395.208170] =====>rtl8192_set_chan()====ch:9 [ 4395.321168] =====>rtl8192_set_chan()====ch:10 [ 4395.433169] =====>rtl8192_set_chan()====ch:11 [ 4395.544693] =====>rtl8192_set_chan()====ch:12 [ 4395.656174] =====>rtl8192_set_chan()====ch:13 [ 4395.770577] alg name:WEP [ 4395.771220] ===========>set_swcam():EntryNo is 0,KeyIndex is 0,KeyType is 1,is_mesh is 0 [ 4395.771345] ===>rtllib_start_scan() [ 4395.771363] =====>rtl8192_set_chan()====ch:3 [ 4395.781429] Linking with ZTE-57095C,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406 [ 4395.781465] ===>rtllib_associate_procedure_wq(), chan:6 [ 4395.781472] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 [ 4395.781478] =====>rtl8192_set_chan()====ch:6 [ 4395.791598] Linking with ZTE-57095C,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406 [ 4395.791747] ===>rtllib_associate_procedure_wq(), chan:6 [ 4395.791749] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 [ 4395.791751] =====>rtl8192_set_chan()====ch:6 [ 4395.803968] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 4395.806050] Associated successfully [ 4395.806055] normal associate [ 4395.806067] Using G rates:108 [ 4395.806069] Successfully associated, ht not enabled(0, 0) [ 4395.806072] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4395.806077] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 4395.807409] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 4395.837904] DHCP pkt src port:68, dest port:67!! [ 4406.225128] wlan0: no IPv6 routers present [ 4413.134881] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4413.188274] =====>rtl8192_set_chan()====ch:1 [ 4413.300121] =====>rtl8192_set_chan()====ch:2 [ 4413.412171] =====>rtl8192_set_chan()====ch:3 [ 4413.524098] =====>rtl8192_set_chan()====ch:4 [ 4413.637116] =====>rtl8192_set_chan()====ch:5 [ 4413.749032] =====>rtl8192_set_chan()====ch:6 [ 4413.861028] =====>rtl8192_set_chan()====ch:7 [ 4413.973027] =====>rtl8192_set_chan()====ch:8 [ 4414.084599] =====>rtl8192_set_chan()====ch:9 [ 4414.197048] =====>rtl8192_set_chan()====ch:10 [ 4414.309052] =====>rtl8192_set_chan()====ch:11 [ 4414.421043] =====>rtl8192_set_chan()====ch:12 [ 4414.533044] =====>rtl8192_set_chan()====ch:13 [ 4414.645064] =====>rtl8192_set_chan()====ch:6 [ 4414.655233] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4414.655243] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 4453.137454] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 4453.137626] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4453.192294] =====>rtl8192_set_chan()====ch:1 [ 4453.304172] =====>rtl8192_set_chan()====ch:2 [ 4453.416149] =====>rtl8192_set_chan()====ch:3 [ 4453.528170] =====>rtl8192_set_chan()====ch:4 [ 4453.640150] =====>rtl8192_set_chan()====ch:5 [ 4453.752148] =====>rtl8192_set_chan()====ch:6 [ 4453.864146] =====>rtl8192_set_chan()====ch:7 [ 4453.976178] =====>rtl8192_set_chan()====ch:8 [ 4454.088180] =====>rtl8192_set_chan()====ch:9 [ 4454.200183] =====>rtl8192_set_chan()====ch:10 [ 4454.312168] =====>rtl8192_set_chan()====ch:11 [ 4454.424101] =====>rtl8192_set_chan()====ch:12 [ 4454.536168] =====>rtl8192_set_chan()====ch:13 [ 4454.648103] =====>rtl8192_set_chan()====ch:6 [ 4454.658269] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4454.658278] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 4496.284049] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 4496.284216] =====>rtl8192_hard_start_xmit() retrun :0:1:0 [ 4496.284230] notify_wx_assoc_event(): Tell user space disconnected [ 4516.773149] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 4516.773164] ===>rtllib_start_scan() [ 4516.773221] =====>rtl8192_set_chan()====ch:2 [ 4516.773802] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4516.802550] =====>rtl8192_set_chan()====ch:1 [ 4516.916170] =====>rtl8192_set_chan()====ch:2 [ 4517.028178] =====>rtl8192_set_chan()====ch:3 [ 4517.140163] =====>rtl8192_set_chan()====ch:4 [ 4517.252163] =====>rtl8192_set_chan()====ch:5 [ 4517.364182] =====>rtl8192_set_chan()====ch:6 [ 4517.476095] =====>rtl8192_set_chan()====ch:7 [ 4517.588146] =====>rtl8192_set_chan()====ch:8 [ 4517.700168] =====>rtl8192_set_chan()====ch:9 [ 4517.812135] =====>rtl8192_set_chan()====ch:10 [ 4517.924172] =====>rtl8192_set_chan()====ch:11 [ 4518.036184] =====>rtl8192_set_chan()====ch:12 [ 4518.148123] =====>rtl8192_set_chan()====ch:13 [ 4518.370585] =====>rtl8192_set_chan()====ch:1 [ 4518.480168] =====>rtl8192_set_chan()====ch:2 [ 4518.592155] =====>rtl8192_set_chan()====ch:3 [ 4518.704154] =====>rtl8192_set_chan()====ch:4 [ 4518.816154] =====>rtl8192_set_chan()====ch:5 [ 4518.928157] =====>rtl8192_set_chan()====ch:6 [ 4519.041064] =====>rtl8192_set_chan()====ch:7 [ 4519.152164] =====>rtl8192_set_chan()====ch:8 [ 4519.264167] =====>rtl8192_set_chan()====ch:9 [ 4519.377151] =====>rtl8192_set_chan()====ch:10 [ 4519.488163] =====>rtl8192_set_chan()====ch:11 [ 4519.600170] =====>rtl8192_set_chan()====ch:12 [ 4519.712166] =====>rtl8192_set_chan()====ch:13 [ 4519.824966] alg name:WEP [ 4519.825596] ===========>set_swcam():EntryNo is 0,KeyIndex is 0,KeyType is 1,is_mesh is 0 [ 4519.825798] ===>rtllib_start_scan() [ 4519.825816] =====>rtl8192_set_chan()====ch:3 [ 4519.835877] Linking with ZTE-57095C,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406 [ 4519.835914] ===>rtllib_associate_procedure_wq(), chan:6 [ 4519.835921] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 [ 4519.835927] =====>rtl8192_set_chan()====ch:6 [ 4519.846018] Linking with ZTE-57095C,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406 [ 4519.846168] ===>rtllib_associate_procedure_wq(), chan:6 [ 4519.846171] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 [ 4519.846173] =====>rtl8192_set_chan()====ch:6 [ 4519.859361] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 4519.864103] Associated successfully [ 4519.864111] normal associate [ 4519.864128] Using G rates:108 [ 4519.864133] Successfully associated, ht not enabled(0, 0) [ 4519.864139] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4519.864146] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 4519.865698] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 4519.896921] DHCP pkt src port:68, dest port:67!! [ 4530.272142] wlan0: no IPv6 routers present [ 4537.139223] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4537.192234] =====>rtl8192_set_chan()====ch:1 [ 4537.304089] =====>rtl8192_set_chan()====ch:2 [ 4537.416156] =====>rtl8192_set_chan()====ch:3 [ 4537.528187] =====>rtl8192_set_chan()====ch:4 [ 4537.640189] =====>rtl8192_set_chan()====ch:5 [ 4537.752143] =====>rtl8192_set_chan()====ch:6 [ 4537.864181] =====>rtl8192_set_chan()====ch:7 [ 4537.976193] =====>rtl8192_set_chan()====ch:8 [ 4538.088177] =====>rtl8192_set_chan()====ch:9 [ 4538.200192] =====>rtl8192_set_chan()====ch:10 [ 4538.312156] =====>rtl8192_set_chan()====ch:11 [ 4538.424105] =====>rtl8192_set_chan()====ch:12 [ 4538.536186] =====>rtl8192_set_chan()====ch:13 [ 4538.648136] =====>rtl8192_set_chan()====ch:6 [ 4538.658310] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4538.658318] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 4577.137503] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 4577.137687] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4577.192312] =====>rtl8192_set_chan()====ch:1 [ 4577.304233] =====>rtl8192_set_chan()====ch:2 [ 4577.416190] =====>rtl8192_set_chan()====ch:3 [ 4577.528181] =====>rtl8192_set_chan()====ch:4 [ 4577.640181] =====>rtl8192_set_chan()====ch:5 [ 4577.752183] =====>rtl8192_set_chan()====ch:6 [ 4577.864120] =====>rtl8192_set_chan()====ch:7 [ 4577.976119] =====>rtl8192_set_chan()====ch:8 [ 4578.088181] =====>rtl8192_set_chan()====ch:9 [ 4578.200182] =====>rtl8192_set_chan()====ch:10 [ 4578.312182] =====>rtl8192_set_chan()====ch:11 [ 4578.424186] =====>rtl8192_set_chan()====ch:12 [ 4578.536180] =====>rtl8192_set_chan()====ch:13 [ 4578.648105] =====>rtl8192_set_chan()====ch:6 [ 4578.658282] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4578.658290] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 4637.137330] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 4637.137559] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4637.192299] =====>rtl8192_set_chan()====ch:1 [ 4637.304106] =====>rtl8192_set_chan()====ch:2 [ 4637.416176] =====>rtl8192_set_chan()====ch:3 [ 4637.528172] =====>rtl8192_set_chan()====ch:4 [ 4637.640174] =====>rtl8192_set_chan()====ch:5 [ 4637.752172] =====>rtl8192_set_chan()====ch:6 [ 4637.864104] =====>rtl8192_set_chan()====ch:7 [ 4637.976107] =====>rtl8192_set_chan()====ch:8 [ 4638.088168] =====>rtl8192_set_chan()====ch:9 [ 4638.200169] =====>rtl8192_set_chan()====ch:10 [ 4638.312170] =====>rtl8192_set_chan()====ch:11 [ 4638.424174] =====>rtl8192_set_chan()====ch:12 [ 4638.536104] =====>rtl8192_set_chan()====ch:13 [ 4638.648114] =====>rtl8192_set_chan()====ch:6 [ 4638.658348] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4638.658357] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 4717.139988] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 4717.140268] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4717.196416] =====>rtl8192_set_chan()====ch:1 [ 4717.308172] =====>rtl8192_set_chan()====ch:2 [ 4717.420174] =====>rtl8192_set_chan()====ch:3 [ 4717.532172] =====>rtl8192_set_chan()====ch:4 [ 4717.644175] =====>rtl8192_set_chan()====ch:5 [ 4717.756169] =====>rtl8192_set_chan()====ch:6 [ 4717.869148] =====>rtl8192_set_chan()====ch:7 [ 4717.980169] =====>rtl8192_set_chan()====ch:8 [ 4718.092169] =====>rtl8192_set_chan()====ch:9 [ 4718.204179] =====>rtl8192_set_chan()====ch:10 [ 4718.316105] =====>rtl8192_set_chan()====ch:11 [ 4718.428176] =====>rtl8192_set_chan()====ch:12 [ 4718.540168] =====>rtl8192_set_chan()====ch:13 [ 4718.652115] =====>rtl8192_set_chan()====ch:6 [ 4718.662274] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 4718.662283] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 4757.576170] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData [ 4757.576345] =====>rtl8192_hard_start_xmit() retrun :0:1:0 [ 4757.576361] notify_wx_assoc_event(): Tell user space disconnected [ 5016.236974] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 5016.236990] ===>rtllib_start_scan() [ 5016.237028] =====>rtl8192_set_chan()====ch:2 [ 5016.238141] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5016.271169] =====>rtl8192_set_chan()====ch:1 [ 5016.384170] =====>rtl8192_set_chan()====ch:2 [ 5016.496178] =====>rtl8192_set_chan()====ch:3 [ 5016.608073] =====>rtl8192_set_chan()====ch:4 [ 5016.720147] =====>rtl8192_set_chan()====ch:5 [ 5016.832170] =====>rtl8192_set_chan()====ch:6 [ 5016.944072] =====>rtl8192_set_chan()====ch:7 [ 5017.056197] =====>rtl8192_set_chan()====ch:8 [ 5017.168170] =====>rtl8192_set_chan()====ch:9 [ 5017.280175] =====>rtl8192_set_chan()====ch:10 [ 5017.392073] =====>rtl8192_set_chan()====ch:11 [ 5017.504180] =====>rtl8192_set_chan()====ch:12 [ 5017.616175] =====>rtl8192_set_chan()====ch:13 [ 5021.397277] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 5021.397417] =====>rtl8192_set_chan()====ch:1 [ 5021.508178] =====>rtl8192_set_chan()====ch:2 [ 5021.620185] =====>rtl8192_set_chan()====ch:3 [ 5021.732121] =====>rtl8192_set_chan()====ch:4 [ 5021.844183] =====>rtl8192_set_chan()====ch:5 [ 5021.960059] =====>rtl8192_set_chan()====ch:6 [ 5022.072182] =====>rtl8192_set_chan()====ch:7 [ 5022.184230] =====>rtl8192_set_chan()====ch:8 [ 5022.296182] =====>rtl8192_set_chan()====ch:9 [ 5022.408121] =====>rtl8192_set_chan()====ch:10 [ 5022.520184] =====>rtl8192_set_chan()====ch:11 [ 5022.632123] =====>rtl8192_set_chan()====ch:12 [ 5022.744123] =====>rtl8192_set_chan()====ch:13 [ 5022.857587] alg name:WEP [ 5022.858232] ===========>set_swcam():EntryNo is 0,KeyIndex is 0,KeyType is 1,is_mesh is 0 [ 5022.858359] ===>rtllib_start_scan() [ 5022.858378] =====>rtl8192_set_chan()====ch:3 [ 5022.868446] Linking with ZTE-57095C,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406 [ 5022.868562] ===>rtllib_associate_procedure_wq(), chan:6 [ 5022.868569] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 [ 5022.868575] =====>rtl8192_set_chan()====ch:6 [ 5022.878700] Linking with ZTE-57095C,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406 [ 5022.878773] ===>rtllib_associate_procedure_wq(), chan:6 [ 5022.878775] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 [ 5022.878778] =====>rtl8192_set_chan()====ch:6 [ 5022.890537] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 5022.893080] Associated successfully [ 5022.893090] normal associate [ 5022.893107] Using G rates:108 [ 5022.893112] Successfully associated, ht not enabled(0, 0) [ 5022.893118] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 5022.893126] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 5022.894673] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5022.921677] DHCP pkt src port:68, dest port:67!! [ 5032.404219] =====>rtl8192_hard_start_xmit() retrun :0:1:0 [ 5032.404236] notify_wx_assoc_event(): Tell user space disconnected [ 5039.230310] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 5039.230325] ===>rtllib_start_scan() [ 5039.230364] =====>rtl8192_set_chan()====ch:2 [ 5039.234071] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 5039.259206] =====>rtl8192_set_chan()====ch:1 [ 5039.372126] =====>rtl8192_set_chan()====ch:2 [ 5039.484175] =====>rtl8192_set_chan()====ch:3 [ 5039.597148] =====>rtl8192_set_chan()====ch:4 [ 5039.708170] =====>rtl8192_set_chan()====ch:5 [ 5039.820169] =====>rtl8192_set_chan()====ch:6 [ 5039.933164] =====>rtl8192_set_chan()====ch:7 [ 5040.044645] =====>rtl8192_set_chan()====ch:8 [ 5040.157069] =====>rtl8192_set_chan()====ch:9 [ 5040.269119] =====>rtl8192_set_chan()====ch:10 [ 5040.380170] =====>rtl8192_set_chan()====ch:11 [ 5040.492091] =====>rtl8192_set_chan()====ch:12 [ 5040.605149] =====>rtl8192_set_chan()====ch:13 [ 5040.761939] =====>rtl8192_set_chan()====ch:1 [ 5040.872172] =====>rtl8192_set_chan()====ch:2 [ 5040.984169] =====>rtl8192_set_chan()====ch:3 [ 5041.097167] =====>rtl8192_set_chan()====ch:4 [ 5041.209150] =====>rtl8192_set_chan()====ch:5 [ 5041.320124] =====>rtl8192_set_chan()====ch:6 [ 5041.432154] =====>rtl8192_set_chan()====ch:7 [ 5041.545074] =====>rtl8192_set_chan()====ch:8 [ 5041.656177] =====>rtl8192_set_chan()====ch:9 [ 5041.768199] =====>rtl8192_set_chan()====ch:10 [ 5041.880183] =====>rtl8192_set_chan()====ch:11 [ 5041.992182] =====>rtl8192_set_chan()====ch:12 [ 5042.104157] =====>rtl8192_set_chan()====ch:13 [ 5042.217368] alg name:WEP [ 5042.218011] ===========>set_swcam():EntryNo is 0,KeyIndex is 0,KeyType is 1,is_mesh is 0 [ 5042.218139] ===>rtllib_start_scan() [ 5042.218157] =====>rtl8192_set_chan()====ch:3 [ 5042.228231] Linking with ZTE-57095C,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406 [ 5042.228352] ===>rtllib_associate_procedure_wq(), chan:6 [ 5042.228359] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 [ 5042.228365] =====>rtl8192_set_chan()====ch:6 [ 5042.238481] Linking with ZTE-57095C,channel:6, qos:0, myHT:0, networkHT:0, mode:6 cur_net.flags:0x406 [ 5042.238667] ===>rtllib_associate_procedure_wq(), chan:6 [ 5042.238672] HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0 [ 5042.238677] =====>rtl8192_set_chan()====ch:6 [ 5042.252688] rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0 [ 5042.255218] Associated successfully [ 5042.255222] normal associate [ 5042.255230] Using G rates:108 [ 5042.255231] Successfully associated, ht not enabled(0, 0) [ 5042.255234] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 5042.255237] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE [ 5042.256476] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 5042.273448] DHCP pkt src port:68, dest port:67!! [ 5053.185097] wlan0: no IPv6 routers present [ 5059.138810] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 5059.192296] =====>rtl8192_set_chan()====ch:1 [ 5059.304196] =====>rtl8192_set_chan()====ch:2 [ 5059.416120] =====>rtl8192_set_chan()====ch:3 [ 5059.528183] =====>rtl8192_set_chan()====ch:4 [ 5059.640166] =====>rtl8192_set_chan()====ch:5 [ 5059.752184] =====>rtl8192_set_chan()====ch:6 [ 5059.864181] =====>rtl8192_set_chan()====ch:7 [ 5059.976181] =====>rtl8192_set_chan()====ch:8 [ 5060.088177] =====>rtl8192_set_chan()====ch:9 [ 5060.200181] =====>rtl8192_set_chan()====ch:10 [ 5060.312167] =====>rtl8192_set_chan()====ch:11 [ 5060.424182] =====>rtl8192_set_chan()====ch:12 [ 5060.536210] =====>rtl8192_set_chan()====ch:13 [ 5060.648135] =====>rtl8192_set_chan()====ch:6 [ 5060.658312] ===>rtl8192se_link_change():ieee->iw_mode is 2 [ 5060.658321] rtl8192_update_cap(): WLAN_CAPABILITY_LONG_PREAMBLE