[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35-20-generic (buildd@crested) (gcc version 4.4.5 20100824 (prerelease) (Ubuntu/Linaro 4.4.4-9ubuntu2) ) #29-Ubuntu SMP Fri Sep 3 14:55:28 UTC 2010 (Ubuntu 2.6.35-20.29-generic 2.6.35.4) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-20-generic root=UUID=bb23728a-94b0-4495-8f28-06098a5d3e24 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back [ 0.000000] 3 base 00DFF00000 mask FFFFF00000 uncachable [ 0.000000] 4 base 0100000000 mask FFE0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000120000000 aka 4608M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xdfee0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000dfee0000 (usable) [ 0.000000] modified: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS) [ 0.000000] modified: 00000000dfee3000 - 00000000dfef0000 (ACPI data) [ 0.000000] modified: 00000000dfef0000 - 00000000dff00000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000120000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000f59f0] f59f0 [ 0.000000] init_memory_mapping: 0000000000000000-00000000dfee0000 [ 0.000000] 0000000000 - 00dfe00000 page 2M [ 0.000000] 00dfe00000 - 00dfee0000 page 4k [ 0.000000] kernel direct mapping tables up to dfee0000 @ 16000-1c000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000 [ 0.000000] 0100000000 - 0120000000 page 2M [ 0.000000] kernel direct mapping tables up to 120000000 @ 1a000-20000 [ 0.000000] RAMDISK: 37574000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000f7790 00024 (v02 Nvidia) [ 0.000000] ACPI: XSDT 00000000dfee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 00000000dfeeac80 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 00000000dfee3280 07985 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000dfee0000 00040 [ 0.000000] ACPI: SSDT 00000000dfeeaec0 001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001) [ 0.000000] ACPI: HPET 00000000dfeeb100 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 00000000dfeeb180 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 00000000dfeeadc0 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000120000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000 [ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880100200000-ffff880103bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00120000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000dfee0 [ 0.000000] 0: 0x00100000 -> 0x00120000 [ 0.000000] On node 0 totalpages: 1048175 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3927 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 898840 pages, LIFO batch:31 [ 0.000000] Normal zone: 1792 pages used for memmap [ 0.000000] Normal zone: 129280 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] early_res array is doubled to 64 at [1b000 - 1b7ff] [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000dfee0000 - 00000000dfee3000 [ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000 [ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000 [ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192 d23168 u524288 [ 0.000000] pcpu-alloc: s91520 r8192 d23168 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032047 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-20-generic root=UUID=bb23728a-94b0-4495-8f28-06098a5d3e24 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ f596000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] early_res array is doubled to 128 at [1b800 - 1c7ff] [ 0.000000] Subtract (58 early reservations) [ 0.000000] #1 [0001000000 - 0001d17114] TEXT DATA BSS [ 0.000000] #2 [0037574000 - 0037ff0000] RAMDISK [ 0.000000] #3 [0001d18000 - 0001d18145] BRK [ 0.000000] #4 [00000f5a00 - 0000100000] BIOS reserved [ 0.000000] #5 [00000f59f0 - 00000f5a00] MP-table mpf [ 0.000000] #6 [000009f000 - 00000f1400] BIOS reserved [ 0.000000] #7 [00000f1564 - 00000f59f0] BIOS reserved [ 0.000000] #8 [00000f1400 - 00000f1564] MP-table mpc [ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE [ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP [ 0.000000] #11 [0000016000 - 000001a000] PGTABLE [ 0.000000] #12 [000001a000 - 000001b000] PGTABLE [ 0.000000] #13 [0100000000 - 0100005000] NODE_DATA [ 0.000000] #14 [0001d18180 - 0001d19180] BOOTMEM [ 0.000000] #15 [0001d17140 - 0001d17440] BOOTMEM [ 0.000000] #16 [0100005000 - 0100006000] BOOTMEM [ 0.000000] #17 [0100006000 - 0100007000] BOOTMEM [ 0.000000] #18 [0100200000 - 0103c00000] MEMMAP 0 [ 0.000000] #19 [0001d17440 - 0001d175c0] BOOTMEM [ 0.000000] #20 [0001d19180 - 0001d31180] BOOTMEM [ 0.000000] #21 [0001d31180 - 0001d34180] BOOTMEM [ 0.000000] #22 [0001d35000 - 0001d36000] BOOTMEM [ 0.000000] #23 [0001d175c0 - 0001d17601] BOOTMEM [ 0.000000] #24 [0001d17640 - 0001d17683] BOOTMEM [ 0.000000] #25 [0001d176c0 - 0001d17928] BOOTMEM [ 0.000000] #26 [0001d17940 - 0001d179a8] BOOTMEM [ 0.000000] #27 [0001d179c0 - 0001d17a28] BOOTMEM [ 0.000000] #28 [0001d17a40 - 0001d17aa8] BOOTMEM [ 0.000000] #29 [0001d17ac0 - 0001d17b28] BOOTMEM [ 0.000000] #30 [0001d17b40 - 0001d17ba8] BOOTMEM [ 0.000000] #31 [0001d17bc0 - 0001d17c28] BOOTMEM [ 0.000000] #32 [0001d17c40 - 0001d17ca8] BOOTMEM [ 0.000000] #33 [0001d17cc0 - 0001d17d28] BOOTMEM [ 0.000000] #34 [0001d17d40 - 0001d17da8] BOOTMEM [ 0.000000] #35 [0001d17dc0 - 0001d17e28] BOOTMEM [ 0.000000] #36 [0001d17e40 - 0001d17e60] BOOTMEM [ 0.000000] #37 [0001d17e80 - 0001d17ea0] BOOTMEM [ 0.000000] #38 [0001d17ec0 - 0001d17f2a] BOOTMEM [ 0.000000] #39 [0001d17f40 - 0001d17faa] BOOTMEM [ 0.000000] #40 [0001e00000 - 0001e1e000] BOOTMEM [ 0.000000] #41 [0001e80000 - 0001e9e000] BOOTMEM [ 0.000000] #42 [0001f00000 - 0001f1e000] BOOTMEM [ 0.000000] #43 [0001f80000 - 0001f9e000] BOOTMEM [ 0.000000] #44 [0001d17fc0 - 0001d17fc8] BOOTMEM [ 0.000000] #45 [0001d34180 - 0001d34188] BOOTMEM [ 0.000000] #46 [0001d341c0 - 0001d341d0] BOOTMEM [ 0.000000] #47 [0001d34200 - 0001d34220] BOOTMEM [ 0.000000] #48 [0001d34240 - 0001d34370] BOOTMEM [ 0.000000] #49 [0001d34380 - 0001d343d0] BOOTMEM [ 0.000000] #50 [0001d34400 - 0001d34450] BOOTMEM [ 0.000000] #51 [0001d36000 - 0001d3e000] BOOTMEM [ 0.000000] #52 [0020000000 - 0024000000] BOOTMEM [ 0.000000] #53 [0001d34480 - 0001d344a0] BOOTMEM [ 0.000000] #54 [0001f9e000 - 0005f9e000] BOOTMEM [ 0.000000] #55 [0001d3e000 - 0001d5e000] BOOTMEM [ 0.000000] #56 [0001d5e000 - 0001d9e000] BOOTMEM [ 0.000000] #57 [000001c800 - 0000024800] BOOTMEM [ 0.000000] Memory: 3976968k/4718592k available (5707k kernel code, 525892k absent, 215732k reserved, 5383k data, 908k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:712 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2009.319 MHz processor. [ 0.010010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.63 BogoMIPS (lpj=20093190) [ 0.010016] pid_max: default: 32768 minimum: 301 [ 0.010043] Security Framework initialized [ 0.010065] AppArmor: AppArmor initialized [ 0.010067] Yama: becoming mindful. [ 0.010637] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.012936] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.014031] Mount-cache hash table entries: 256 [ 0.014190] Initializing cgroup subsys ns [ 0.014194] Initializing cgroup subsys cpuacct [ 0.014199] Initializing cgroup subsys memory [ 0.014210] Initializing cgroup subsys devices [ 0.014213] Initializing cgroup subsys freezer [ 0.014216] Initializing cgroup subsys net_cls [ 0.014244] tseg: 00dff00000 [ 0.014247] CPU: Physical Processor ID: 0 [ 0.014249] CPU: Processor Core ID: 0 [ 0.014252] mce: CPU supports 5 MCE banks [ 0.014264] using C1E aware idle routine [ 0.014266] Performance Events: AMD PMU driver. [ 0.014272] ... version: 0 [ 0.014274] ... bit width: 48 [ 0.014276] ... generic registers: 4 [ 0.014278] ... value mask: 0000ffffffffffff [ 0.014281] ... max period: 00007fffffffffff [ 0.014283] ... fixed-purpose events: 0 [ 0.014285] ... event mask: 000000000000000f [ 0.015970] ACPI: Core revision 20100428 [ 0.029271] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.029283] ftrace: allocating 22669 entries in 89 pages [ 0.030099] Setting APIC routing to flat [ 0.030546] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.137122] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.140000] Booting Node 0, Processors #1 [ 0.290129] Brought up 2 CPUs [ 0.290132] Total of 2 processors activated (8037.20 BogoMIPS). [ 0.290379] devtmpfs: initialized [ 0.290948] regulator: core version 0.5 [ 0.290984] Time: 15:23:32 Date: 09/11/10 [ 0.291039] NET: Registered protocol family 16 [ 0.291177] node 0 link 0: io port [9000, ffff] [ 0.291180] TOM: 00000000e0000000 aka 3584M [ 0.291183] node 0 link 0: mmio [a0000, bffff] [ 0.291186] node 0 link 0: mmio [e0000000, efffffff] [ 0.291190] node 0 link 0: mmio [f4000000, fe02ffff] [ 0.291193] node 0 link 0: mmio [f0000000, f02fffff] [ 0.291196] TOM2: 0000000120000000 aka 4608M [ 0.291198] bus: [00, 02] on node 0 link 0 [ 0.291201] bus: 00 index 0 [io 0x0000-0xffff] [ 0.291204] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.291206] bus: 00 index 2 [mem 0xe0000000-0xf3ffffff] [ 0.291209] bus: 00 index 3 [mem 0xf4000000-0xffffffff] [ 0.291211] bus: 00 index 4 [mem 0x120000000-0xfcffffffff] [ 0.291219] ACPI: bus type pci registered [ 0.291301] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) [ 0.291305] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 [ 0.297965] PCI: Using configuration type 1 for base access [ 0.298741] Trying to unpack rootfs image as initramfs... [ 0.310052] bio: create slab at 0 [ 0.311605] ACPI: EC: Look up EC in DSDT [ 0.321717] ACPI: Interpreter enabled [ 0.321721] ACPI: (supports S0 S1 S3 S4 S5) [ 0.321754] ACPI: Using IOAPIC for interrupt routing [ 0.333323] ACPI: No dock devices found. [ 0.333328] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.333462] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.333718] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.333722] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.333725] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.333728] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] [ 0.333731] pci_root PNP0A08:00: host bridge window [mem 0xdff00000-0xfebfffff] [ 0.333919] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc3f] [ 0.333931] pci 0000:00:01.1: reg 20: [io 0x1c00-0x1c3f] [ 0.333936] pci 0000:00:01.1: reg 24: [io 0x1c40-0x1c7f] [ 0.333958] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.333964] pci 0000:00:01.1: PME# disabled [ 0.333989] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff] [ 0.334011] pci 0000:00:02.0: supports D1 D2 [ 0.334014] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.334017] pci 0000:00:02.0: PME# disabled [ 0.334039] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02e0ff] [ 0.334062] pci 0000:00:02.1: supports D1 D2 [ 0.334065] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.334068] pci 0000:00:02.1: PME# disabled [ 0.334096] pci 0000:00:04.0: reg 20: [io 0xf000-0xf00f] [ 0.334126] pci 0000:00:05.0: reg 10: [io 0x09f0-0x09f7] [ 0.334130] pci 0000:00:05.0: reg 14: [io 0x0bf0-0x0bf3] [ 0.334134] pci 0000:00:05.0: reg 18: [io 0x0970-0x0977] [ 0.334138] pci 0000:00:05.0: reg 1c: [io 0x0b70-0x0b73] [ 0.334142] pci 0000:00:05.0: reg 20: [io 0xdc00-0xdc0f] [ 0.334147] pci 0000:00:05.0: reg 24: [mem 0xfe02d000-0xfe02dfff] [ 0.334179] pci 0000:00:05.1: reg 10: [io 0x09e0-0x09e7] [ 0.334184] pci 0000:00:05.1: reg 14: [io 0x0be0-0x0be3] [ 0.334188] pci 0000:00:05.1: reg 18: [io 0x0960-0x0967] [ 0.334192] pci 0000:00:05.1: reg 1c: [io 0x0b60-0x0b63] [ 0.334196] pci 0000:00:05.1: reg 20: [io 0xc800-0xc80f] [ 0.334200] pci 0000:00:05.1: reg 24: [mem 0xfe02c000-0xfe02cfff] [ 0.334233] pci 0000:00:05.2: reg 10: [io 0xc400-0xc407] [ 0.334237] pci 0000:00:05.2: reg 14: [io 0xc000-0xc003] [ 0.334241] pci 0000:00:05.2: reg 18: [io 0xbc00-0xbc07] [ 0.334245] pci 0000:00:05.2: reg 1c: [io 0xb800-0xb803] [ 0.334249] pci 0000:00:05.2: reg 20: [io 0xb400-0xb40f] [ 0.334254] pci 0000:00:05.2: reg 24: [mem 0xfe02b000-0xfe02bfff] [ 0.334329] pci 0000:00:08.0: reg 10: [mem 0xfe02a000-0xfe02afff] [ 0.334333] pci 0000:00:08.0: reg 14: [io 0xb000-0xb007] [ 0.334337] pci 0000:00:08.0: reg 18: [mem 0xfe029000-0xfe0290ff] [ 0.334342] pci 0000:00:08.0: reg 1c: [mem 0xfe028000-0xfe02800f] [ 0.334365] pci 0000:00:08.0: supports D1 D2 [ 0.334367] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.334372] pci 0000:00:08.0: PME# disabled [ 0.334414] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.334417] pci 0000:00:0f.0: PME# disabled [ 0.334542] pci 0000:01:06.0: reg 10: [mem 0xfdeff000-0xfdefffff pref] [ 0.334581] pci 0000:01:07.0: reg 10: [io 0xac00-0xac3f] [ 0.334611] pci 0000:01:07.0: supports D1 D2 [ 0.334630] pci 0000:01:07.1: reg 10: [io 0xa800-0xa807] [ 0.334659] pci 0000:01:07.1: supports D1 D2 [ 0.334680] pci 0000:01:07.2: reg 10: [mem 0xfddff000-0xfddff7ff] [ 0.334686] pci 0000:01:07.2: reg 14: [mem 0xfddf8000-0xfddfbfff] [ 0.334715] pci 0000:01:07.2: supports D1 D2 [ 0.334717] pci 0000:01:07.2: PME# supported from D0 D1 D2 D3hot [ 0.334721] pci 0000:01:07.2: PME# disabled [ 0.334748] pci 0000:01:08.0: reg 10: [mem 0xfddfe000-0xfddfefff] [ 0.334776] pci 0000:01:08.0: supports D1 D2 [ 0.334779] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot [ 0.334782] pci 0000:01:08.0: PME# disabled [ 0.334803] pci 0000:01:08.1: reg 10: [mem 0xfddfd000-0xfddfdfff] [ 0.334832] pci 0000:01:08.1: supports D1 D2 [ 0.334834] pci 0000:01:08.1: PME# supported from D0 D1 D2 D3hot [ 0.334837] pci 0000:01:08.1: PME# disabled [ 0.334858] pci 0000:01:08.2: reg 10: [mem 0xfddfc000-0xfddfc0ff] [ 0.334887] pci 0000:01:08.2: supports D1 D2 [ 0.334889] pci 0000:01:08.2: PME# supported from D0 D1 D2 D3hot [ 0.334893] pci 0000:01:08.2: PME# disabled [ 0.334922] pci 0000:00:06.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.334925] pci 0000:00:06.0: bridge window [io 0xa000-0xafff] [ 0.334929] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.334933] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff pref] [ 0.334936] pci 0000:00:06.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.334939] pci 0000:00:06.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.334942] pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.334945] pci 0000:00:06.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) [ 0.334948] pci 0000:00:06.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode) [ 0.334991] pci 0000:02:00.0: reg 10: [mem 0xfa000000-0xfaffffff] [ 0.334999] pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.335007] pci 0000:02:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit] [ 0.335012] pci 0000:02:00.0: reg 24: [io 0x9c00-0x9c7f] [ 0.335017] pci 0000:02:00.0: reg 30: [mem 0xfcfe0000-0xfcffffff pref] [ 0.335042] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.335050] pci 0000:00:0f.0: PCI bridge to [bus 02-02] [ 0.335054] pci 0000:00:0f.0: bridge window [io 0x9000-0x9fff] [ 0.335057] pci 0000:00:0f.0: bridge window [mem 0xfa000000-0xfcffffff] [ 0.335061] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.335073] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.335424] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.386519] ACPI: PCI Interrupt Link [LNK1] (IRQs *5 7 9 10 11 14 15) [ 0.386710] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15) [ 0.386898] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15) [ 0.387086] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15) [ 0.387272] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.387461] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15) [ 0.387648] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.387835] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.388023] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.388211] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 *10 11 14 15) [ 0.388399] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15) [ 0.388586] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.388778] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.388968] ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15) [ 0.389156] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 *11 14 15) [ 0.389343] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.389532] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15) [ 0.389728] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15) [ 0.389921] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15) [ 0.390190] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 0.390430] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.390670] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.390911] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.391150] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.391390] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 0.391630] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.391869] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.392109] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.392352] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.392594] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.392837] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled. [ 0.393079] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.393320] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.393563] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.393806] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.394050] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.394298] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.394548] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 0.394611] HEST: Table is not found! [ 0.394724] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.394727] vgaarb: loaded [ 0.394906] SCSI subsystem initialized [ 0.395017] libata version 3.00 loaded. [ 0.395074] usbcore: registered new interface driver usbfs [ 0.395088] usbcore: registered new interface driver hub [ 0.395120] usbcore: registered new device driver usb [ 0.395282] ACPI: WMI: Mapper loaded [ 0.395284] PCI: Using ACPI for IRQ routing [ 0.395288] PCI: pci_cache_line_size set to 64 bytes [ 0.395370] reserve RAM buffer: 000000000009f000 - 000000000009ffff [ 0.395373] reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff [ 0.395483] NetLabel: Initializing [ 0.395485] NetLabel: domain hash size = 128 [ 0.395486] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.395501] NetLabel: unlabeled traffic allowed by default [ 0.395539] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.395546] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31 [ 0.395551] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.410040] Switching to clocksource hpet [ 0.420826] AppArmor: AppArmor Filesystem Enabled [ 0.420846] pnp: PnP ACPI init [ 0.420870] ACPI: bus type pnp registered [ 0.427624] pnp: PnP ACPI: found 13 devices [ 0.427626] ACPI: ACPI bus type pnp unregistered [ 0.427645] system 00:01: [io 0x1000-0x107f] has been reserved [ 0.427648] system 00:01: [io 0x1080-0x10ff] has been reserved [ 0.427651] system 00:01: [io 0x1400-0x147f] has been reserved [ 0.427655] system 00:01: [io 0x1480-0x14ff] has been reserved [ 0.427658] system 00:01: [io 0x1800-0x187f] has been reserved [ 0.427661] system 00:01: [io 0x1880-0x18ff] has been reserved [ 0.427668] system 00:02: [io 0x04d0-0x04d1] has been reserved [ 0.427672] system 00:02: [io 0x0800-0x087f] has been reserved [ 0.427675] system 00:02: [io 0x0290-0x0297] has been reserved [ 0.427685] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.427691] system 00:0c: [mem 0x000cec00-0x000cffff] has been reserved [ 0.427695] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.427698] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.427702] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.427705] system 00:0c: [mem 0xfefff000-0xfefff0ff] has been reserved [ 0.427709] system 00:0c: [mem 0xdfee0000-0xdfefffff] could not be reserved [ 0.427712] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved [ 0.427716] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.427719] system 00:0c: [mem 0x00100000-0xdfedffff] could not be reserved [ 0.427723] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.427726] system 00:0c: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.427730] system 00:0c: [mem 0xfefff000-0xfeffffff] could not be reserved [ 0.427733] system 00:0c: [mem 0xfff80000-0xfff80fff] has been reserved [ 0.427736] system 00:0c: [mem 0xfff90000-0xfffbffff] has been reserved [ 0.427743] system 00:0c: [mem 0xfffed000-0xfffeffff] has been reserved [ 0.433870] pci 0000:00:06.0: PCI bridge to [bus 01-01] [ 0.433875] pci 0000:00:06.0: bridge window [io 0xa000-0xafff] [ 0.433879] pci 0000:00:06.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.433882] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff pref] [ 0.433887] pci 0000:00:0f.0: PCI bridge to [bus 02-02] [ 0.433889] pci 0000:00:0f.0: bridge window [io 0x9000-0x9fff] [ 0.433893] pci 0000:00:0f.0: bridge window [mem 0xfa000000-0xfcffffff] [ 0.433896] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] [ 0.433906] pci 0000:00:06.0: setting latency timer to 64 [ 0.433912] pci 0000:00:0f.0: setting latency timer to 64 [ 0.433915] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.433918] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.433921] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.433924] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.433926] pci_bus 0000:00: resource 8 [mem 0xdff00000-0xfebfffff] [ 0.433930] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.433932] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.433935] pci_bus 0000:01: resource 2 [mem 0xfde00000-0xfdefffff pref] [ 0.433938] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.433940] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.433943] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.433946] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff] [ 0.433949] pci_bus 0000:01: resource 8 [mem 0xdff00000-0xfebfffff] [ 0.433952] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 0.433954] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfcffffff] [ 0.433957] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.434007] NET: Registered protocol family 2 [ 0.434218] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.435994] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.440011] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.440570] TCP: Hash tables configured (established 524288 bind 65536) [ 0.440574] TCP reno registered [ 0.440592] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.440650] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.440795] NET: Registered protocol family 1 [ 0.461344] pci 0000:00:05.0: Enabling HT MSI Mapping [ 0.461393] pci 0000:00:05.1: Enabling HT MSI Mapping [ 0.461441] pci 0000:00:05.2: Enabling HT MSI Mapping [ 0.461489] pci 0000:00:06.0: Enabling HT MSI Mapping [ 0.461548] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.461609] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 0.461672] pci 0000:02:00.0: Boot video device [ 0.461675] PCI: CLS 32 bytes, default 64 [ 0.511425] PCI-DMA: Disabling AGP. [ 0.511546] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.511549] PCI-DMA: using GART IOMMU. [ 0.511553] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.515425] Scanning for low memory corruption every 60 seconds [ 0.515598] audit: initializing netlink socket (disabled) [ 0.515612] type=2000 audit(1284218612.510:1): initialized [ 0.530554] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.532235] VFS: Disk quotas dquot_6.5.2 [ 0.532302] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.532994] fuse init (API version 7.14) [ 0.533089] msgmni has been set to 7896 [ 0.533422] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.533425] io scheduler noop registered [ 0.533427] io scheduler deadline registered [ 0.533471] io scheduler cfq registered (default) [ 0.533625] pcieport 0000:00:0f.0: setting latency timer to 64 [ 0.533644] alloc irq_desc for 40 on node 0 [ 0.533646] alloc kstat_irqs on node 0 [ 0.533656] pcieport 0000:00:0f.0: irq 40 for MSI/MSI-X [ 0.533735] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.533757] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.533948] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.533955] ACPI: Power Button [PWRB] [ 0.534021] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.534024] ACPI: Power Button [PWRF] [ 0.534083] ACPI: Fan [FAN] (on) [ 0.534507] ACPI: acpi_idle registered with cpuidle [ 0.541070] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20100428/nspredef-1059) [ 0.541079] ACPI: Expecting a [Reference] package element, found type 0 [ 0.541082] ACPI: Invalid passive threshold [ 0.541567] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.541576] ACPI: Thermal Zone [THRM] (40 C) [ 0.541640] ERST: Table is not found! [ 0.541911] Linux agpgart interface v0.103 [ 0.541916] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.542018] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.542321] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.543465] brd: module loaded [ 0.543996] loop: module loaded [ 0.544358] pata_acpi 0000:00:04.0: setting latency timer to 64 [ 0.544825] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.544831] alloc irq_desc for 23 on node 0 [ 0.544833] alloc kstat_irqs on node 0 [ 0.544846] pata_acpi 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.544864] pata_acpi 0000:00:05.0: setting latency timer to 64 [ 0.544873] pata_acpi 0000:00:05.0: PCI INT A disabled [ 0.545296] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.545299] alloc irq_desc for 22 on node 0 [ 0.545301] alloc kstat_irqs on node 0 [ 0.545308] pata_acpi 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.545335] pata_acpi 0000:00:05.1: setting latency timer to 64 [ 0.545342] pata_acpi 0000:00:05.1: PCI INT B disabled [ 0.545762] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 [ 0.545767] alloc irq_desc for 21 on node 0 [ 0.545769] alloc kstat_irqs on node 0 [ 0.545776] pata_acpi 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 0.545797] pata_acpi 0000:00:05.2: setting latency timer to 64 [ 0.545803] pata_acpi 0000:00:05.2: PCI INT C disabled [ 0.546263] Fixed MDIO Bus: probed [ 0.546303] PPP generic driver version 2.4.2 [ 0.546358] tun: Universal TUN/TAP device driver, 1.6 [ 0.546360] tun: (C) 1999-2004 Max Krasnyansky [ 0.546446] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.546901] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 0.546905] alloc irq_desc for 20 on node 0 [ 0.546907] alloc kstat_irqs on node 0 [ 0.546917] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20 [ 0.546954] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.546957] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.547009] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.547040] ehci_hcd 0000:00:02.1: debug port 1 [ 0.547047] ehci_hcd 0000:00:02.1: cache line size of 32 is not supported [ 0.547071] ehci_hcd 0000:00:02.1: irq 20, io mem 0xfe02e000 [ 0.560027] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.560144] hub 1-0:1.0: USB hub found [ 0.560149] hub 1-0:1.0: 10 ports detected [ 0.560662] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 0.560666] alloc irq_desc for 16 on node 0 [ 0.560668] alloc kstat_irqs on node 0 [ 0.560678] ehci_hcd 0000:01:08.2: PCI INT C -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 0.560695] ehci_hcd 0000:01:08.2: EHCI Host Controller [ 0.560742] ehci_hcd 0000:01:08.2: new USB bus registered, assigned bus number 2 [ 0.590036] ehci_hcd 0000:01:08.2: irq 16, io mem 0xfddfc000 [ 0.610015] ehci_hcd 0000:01:08.2: USB 2.0 started, EHCI 0.95 [ 0.610127] hub 2-0:1.0: USB hub found [ 0.610132] hub 2-0:1.0: 5 ports detected [ 0.610219] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.610627] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 0.610632] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.610649] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.610652] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.610695] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 0.610724] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 0.618159] Freeing initrd memory: 10736k freed [ 0.672131] hub 3-0:1.0: USB hub found [ 0.672137] hub 3-0:1.0: 10 ports detected [ 0.672688] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 0.672692] alloc irq_desc for 18 on node 0 [ 0.672694] alloc kstat_irqs on node 0 [ 0.672705] ohci_hcd 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 0.672723] ohci_hcd 0000:01:08.0: OHCI Host Controller [ 0.672771] ohci_hcd 0000:01:08.0: new USB bus registered, assigned bus number 4 [ 0.672801] ohci_hcd 0000:01:08.0: irq 18, io mem 0xfddfe000 [ 1.240230] hub 4-0:1.0: USB hub found [ 1.240236] hub 4-0:1.0: 3 ports detected [ 1.240717] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 1.240722] alloc irq_desc for 19 on node 0 [ 1.240724] alloc kstat_irqs on node 0 [ 1.240733] ohci_hcd 0000:01:08.1: PCI INT B -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 1.240751] ohci_hcd 0000:01:08.1: OHCI Host Controller [ 1.240806] ohci_hcd 0000:01:08.1: new USB bus registered, assigned bus number 5 [ 1.240835] ohci_hcd 0000:01:08.1: irq 19, io mem 0xfddfd000 [ 1.421265] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 1.691263] usb 1-4: new high speed USB device using ehci_hcd and address 4 [ 1.810199] hub 5-0:1.0: USB hub found [ 1.810204] hub 5-0:1.0: 2 ports detected [ 1.810289] uhci_hcd: USB Universal Host Controller Interface driver [ 1.810442] PNP: No PS/2 controller found. Probing ports directly. [ 1.810845] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.810853] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.810937] mice: PS/2 mouse device common for all mice [ 1.811057] rtc_cmos 00:05: RTC can wake from S4 [ 1.811104] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.811139] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs [ 1.811275] device-mapper: uevent: version 1.0.3 [ 1.811404] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 1.811544] device-mapper: multipath: version 1.1.1 loaded [ 1.811547] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.811805] cpuidle: using governor ladder [ 1.811807] cpuidle: using governor menu [ 1.812117] TCP cubic registered [ 1.812265] NET: Registered protocol family 10 [ 1.812715] lo: Disabled Privacy Extensions [ 1.812960] NET: Registered protocol family 17 [ 1.813004] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2 cpu cores) (version 2.20.00) [ 1.813060] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xc [ 1.813062] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xe [ 1.813064] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 1.813220] PM: Resume from disk failed. [ 1.813234] registered taskstats version 1 [ 1.813506] Magic number: 10:258:386 [ 1.813513] usb usb4: hash matches [ 1.813531] thermal cooling_device1: hash matches [ 1.813617] rtc_cmos 00:05: setting system clock to 2010-09-11 15:23:34 UTC (1284218614) [ 1.813620] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.813622] EDD information not available. [ 1.813714] Freeing unused kernel memory: 908k freed [ 1.814123] Write protecting the kernel read-only data: 10240k [ 1.814311] Freeing unused kernel memory: 416k freed [ 1.814645] Freeing unused kernel memory: 1644k freed [ 1.837261] udev[111]: starting version 162 [ 1.842760] hub 1-4:1.0: USB hub found [ 1.842849] hub 1-4:1.0: 2 ports detected [ 1.965669] sata_nv 0000:00:05.0: version 3.5 [ 1.965687] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 1.965690] sata_nv 0000:00:05.0: Using SWNCQ mode [ 1.966092] sata_nv 0000:00:05.0: setting latency timer to 64 [ 1.975145] scsi0 : sata_nv [ 1.980938] Initializing USB Mass Storage driver... [ 1.992783] scsi1 : sata_nv [ 1.993066] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23 [ 1.993070] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23 [ 1.999982] firewire_ohci 0000:01:07.2: PCI INT B -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 2.006866] Floppy drive(s): fd0 is 1.44M [ 2.016993] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 2.016998] sata_nv 0000:00:05.1: Using SWNCQ mode [ 2.017395] sata_nv 0000:00:05.1: setting latency timer to 64 [ 2.020696] scsi2 : usb-storage 1-3:1.0 [ 2.022803] scsi3 : sata_nv [ 2.022850] usbcore: registered new interface driver usb-storage [ 2.022855] USB Mass Storage support registered. [ 2.024239] scsi4 : sata_nv [ 2.024495] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 22 [ 2.024501] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 22 [ 2.024629] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 2.024632] sata_nv 0000:00:05.2: Using SWNCQ mode [ 2.024644] FDC 0 is a post-1991 82077 [ 2.025013] sata_nv 0000:00:05.2: setting latency timer to 64 [ 2.025447] scsi5 : sata_nv [ 2.025556] scsi6 : sata_nv [ 2.025816] ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 21 [ 2.025819] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 21 [ 2.026309] pata_amd 0000:00:04.0: version 0.4.1 [ 2.026369] pata_amd 0000:00:04.0: setting latency timer to 64 [ 2.026474] scsi7 : pata_amd [ 2.027202] scsi8 : pata_amd [ 2.028045] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 2.028049] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 2.028296] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 2.028693] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 2.028699] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 2.028704] forcedeth 0000:00:08.0: setting latency timer to 64 [ 2.028767] nv_probe: set workaround bit for reversed mac addr [ 2.060046] firewire_ohci: Added fw-ohci device 0000:01:07.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x0 [ 2.200350] ata7.00: ATAPI: TOSHIBA DVD-ROM SD-M1712, 1004, max UDMA/33 [ 2.200377] ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13) [ 2.241545] ata7.00: configured for UDMA/33 [ 2.301270] usb 3-2: new low speed USB device using ohci_hcd and address 2 [ 2.360017] ata5: SATA link down (SStatus 0 SControl 300) [ 2.501271] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.510043] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.530130] ata3.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100 [ 2.550840] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1a:92:15:b0:e5 [ 2.550844] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 2.561355] firewire_core: created device fw0: GUID 00023c0151003cec, S400 [ 2.571410] ata3.00: configured for UDMA/100 [ 2.587451] ata1.00: ATA-7: ST3300622AS, 3.AAE, max UDMA/133 [ 2.587455] ata1.00: 586072368 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 2.670752] ata1.00: configured for UDMA/133 [ 2.670906] scsi 0:0:0:0: Direct-Access ATA ST3300622AS 3.AA PQ: 0 ANSI: 5 [ 2.671113] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.671232] sd 0:0:0:0: [sda] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 2.671300] sd 0:0:0:0: [sda] Write Protect is off [ 2.671304] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.671327] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.671480] sda: sda1 sda2 sda3 [ 2.716654] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.870021] usb 3-6: new full speed USB device using ohci_hcd and address 3 [ 3.023378] scsi 2:0:0:0: Direct-Access WD 5000AAV External 1.65 PQ: 0 ANSI: 4 [ 3.023987] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.024493] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.026241] sd 2:0:0:0: [sdb] Write Protect is off [ 3.026244] sd 2:0:0:0: [sdb] Mode Sense: 21 00 00 00 [ 3.026247] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 3.029240] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 3.029249] sdb: sdb1 [ 3.032237] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 3.032240] sd 2:0:0:0: [sdb] Attached SCSI disk [ 3.110105] hub 3-6:1.0: USB hub found [ 3.113034] hub 3-6:1.0: 3 ports detected [ 3.160040] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.180218] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7 [ 3.180222] ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 3.200224] ata2.00: configured for UDMA/133 [ 3.200373] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [ 3.200564] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 3.200586] sd 1:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.200765] sd 1:0:0:0: [sdc] Write Protect is off [ 3.200768] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.200814] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.201066] sdc: [ 3.203986] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS15 IL00 PQ: 0 ANSI: 5 [ 3.210689] sdc1 sdc2 [ 3.211005] sd 1:0:0:0: [sdc] Attached SCSI disk [ 3.215878] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.215882] Uniform CD-ROM driver Revision: 3.20 [ 3.215986] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 3.216065] sr 3:0:0:0: Attached scsi generic sg3 type 5 [ 3.400022] usb 2-5: new high speed USB device using ehci_hcd and address 2 [ 3.540022] ata4: SATA link down (SStatus 0 SControl 300) [ 3.555170] scsi9 : usb-storage 2-5:1.0 [ 3.632234] usb 1-4.1: new high speed USB device using ehci_hcd and address 6 [ 3.842242] usb 1-4.2: new high speed USB device using ehci_hcd and address 7 [ 3.870019] ata6: SATA link down (SStatus 0 SControl 300) [ 3.896633] scsi 7:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1712 1004 PQ: 0 ANSI: 5 [ 3.903514] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 3.903652] sr 7:0:0:0: Attached scsi CD-ROM sr1 [ 3.903729] sr 7:0:0:0: Attached scsi generic sg4 type 5 [ 3.903812] ata8: port disabled. ignoring. [ 3.961187] hub 1-4.2:1.0: USB hub found [ 3.961435] hub 1-4.2:1.0: 3 ports detected [ 4.042044] usb 3-6.1: new full speed USB device using ohci_hcd and address 4 [ 4.184511] usbcore: registered new interface driver hiddev [ 4.189369] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:02.0/usb3/3-6/3-6.1/3-6.1:1.0/input/input2 [ 4.189487] generic-usb 0003:0A5C:4502.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:02.0-6.1/input0 [ 4.189512] usbcore: registered new interface driver usbhid [ 4.189514] usbhid: USB HID core driver [ 4.203518] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.253039] usb 3-6.2: new full speed USB device using ohci_hcd and address 5 [ 4.388506] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:02.0/usb3/3-6/3-6.2/3-6.2:1.0/input/input3 [ 4.388617] generic-usb 0003:0A5C:4503.0002: input,hidraw1: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:02.0-6.2/input0 [ 4.473039] usb 3-6.3: new full speed USB device using ohci_hcd and address 6 [ 4.561860] scsi 9:0:0:0: Direct-Access Generic CF 1.6E PQ: 0 ANSI: 0 CCS [ 4.563221] scsi 9:0:0:1: Direct-Access Generic MS 1.6E PQ: 0 ANSI: 0 CCS [ 4.564595] scsi 9:0:0:2: Direct-Access Generic MMC/SD 1.6E PQ: 0 ANSI: 0 CCS [ 4.565845] scsi 9:0:0:3: Direct-Access Generic SM 1.6E PQ: 0 ANSI: 0 CCS [ 4.566396] sd 9:0:0:0: Attached scsi generic sg5 type 0 [ 4.566545] sd 9:0:0:1: Attached scsi generic sg6 type 0 [ 4.566686] sd 9:0:0:2: Attached scsi generic sg7 type 0 [ 4.566834] sd 9:0:0:3: Attached scsi generic sg8 type 0 [ 4.570837] sd 9:0:0:0: [sdd] Attached SCSI removable disk [ 4.571710] sd 9:0:0:1: [sde] Attached SCSI removable disk [ 4.572586] sd 9:0:0:2: [sdf] Attached SCSI removable disk [ 4.573460] sd 9:0:0:3: [sdg] Attached SCSI removable disk [ 4.691358] usb 1-4.2.2: new low speed USB device using ehci_hcd and address 8 [ 4.902235] usb 1-4.2.3: new low speed USB device using ehci_hcd and address 9 [ 5.801362] Adding 1735016k swap on /dev/sda2. Priority:-1 extents:1 across:1735016k [ 6.215514] udev[450]: starting version 162 [ 7.032672] Bluetooth: Core ver 2.15 [ 7.032725] NET: Registered protocol family 31 [ 7.032727] Bluetooth: HCI device and connection manager initialized [ 7.032731] Bluetooth: HCI socket layer initialized [ 7.340422] Linux video capture interface: v2.00 [ 7.353950] uvcvideo: Found UVC 1.00 device Microsoft® LifeCam Cinema(TM) (045e:075d) [ 7.361414] input: Microsoft® LifeCam Cinema(TM) as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.1/1-4.1:1.0/input/input4 [ 7.362359] usbcore: registered new interface driver uvcvideo [ 7.362364] USB Video Class driver (v0.1.0) [ 7.362585] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 7.368877] usbcore: registered new interface driver btusb [ 7.374798] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.2/1-4.2.2/1-4.2.2:1.0/input/input5 [ 7.374941] apple 0003:05AC:0221.0003: input,hidraw2: USB HID v1.11 Keyboard [Apple, Inc Apple Keyboard] on usb-0000:00:02.1-4.2.2/input0 [ 7.378713] input: Apple, Inc Apple Keyboard as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.2/1-4.2.2/1-4.2.2:1.1/input/input6 [ 7.378854] apple 0003:05AC:0221.0004: input,hidraw3: USB HID v1.11 Device [Apple, Inc Apple Keyboard] on usb-0000:00:02.1-4.2.2/input1 [ 7.382008] input: Mitsumi Electric Apple Optical USB Mouse as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.2/1-4.2.3/1-4.2.3:1.0/input/input7 [ 7.382164] apple 0003:05AC:0304.0005: input,hidraw4: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-0000:00:02.1-4.2.3/input0 [ 7.451307] lp: driver loaded but no devices found [ 7.572799] type=1400 audit(1284211420.247:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=634 comm="apparmor_parser" [ 7.573104] type=1400 audit(1284211420.247:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=634 comm="apparmor_parser" [ 7.573276] type=1400 audit(1284211420.247:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=634 comm="apparmor_parser" [ 7.656120] input: X10 WTI RF receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-2/input/input8 [ 7.656280] usbcore: registered new interface driver ati_remote [ 7.656283] ati_remote: 2.2.1:ATI/X10 RF USB Remote Control [ 7.664033] usb 3-2: Weird data, len=1 ff 03 00 00 00 00 ... [ 7.686396] parport_pc 00:0a: reported by Plug and Play ACPI [ 7.686425] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 7.724302] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 7.724310] ACPI: resource nForce2_smbus [io 0x1c40-0x1c7f] conflicts with ACPI region SM00 [mem 0x00001c40-0x00001c45 64bit disabled] [ 7.724314] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.750328] gameport gameport0: EMU10K1 is pci0000:01:07.1/gameport0, io 0xa800, speed 1204kHz [ 7.761445] lp0: using parport0 (interrupt-driven). [ 7.837350] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 7.849333] ppdev: user-space parallel port driver [ 7.950134] EDAC MC: Ver: 2.1.0 Sep 3 2010 [ 8.003552] EDAC amd64_edac: Ver: 3.3.0 Sep 3 2010 [ 8.003873] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 8.003885] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 8.003887] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 8.003888] (Note that use of the override may cause unknown side effects.) [ 8.003919] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 9.508538] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 9.508545] alloc irq_desc for 17 on node 0 [ 9.508548] alloc kstat_irqs on node 0 [ 9.508562] EMU10K1_Audigy 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17 [ 9.511110] Installing spdif_bug patch: SB Audigy 2 ZS [SB0350] [ 9.553213] nvidia: module license 'NVIDIA' taints kernel. [ 9.553219] Disabling lock debugging due to kernel taint [ 10.191363] 6:3:1: cannot get freq at ep 0x82 [ 10.207981] usbcore: registered new interface driver snd-usb-audio [ 10.346538] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 10.346546] nvidia 0000:02:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16 [ 10.346554] nvidia 0000:02:00.0: setting latency timer to 64 [ 10.346560] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 10.346819] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 256.53 Fri Aug 27 20:27:48 PDT 2010 [ 11.834725] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 12.047352] EXT3-fs: barriers not enabled [ 12.054764] kjournald starting. Commit interval 5 seconds [ 12.055195] EXT3-fs (sda3): using internal journal [ 12.055201] EXT3-fs (sda3): mounted filesystem with ordered data mode [ 12.136670] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null) [ 12.253506] EXT3-fs: barriers not enabled [ 12.254048] kjournald starting. Commit interval 5 seconds [ 12.254862] EXT3-fs (sdb1): using internal journal [ 12.254868] EXT3-fs (sdb1): mounted filesystem with ordered data mode [ 13.083926] type=1400 audit(1284211425.757:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1119 comm="apparmor_parser" [ 13.084232] type=1400 audit(1284211425.757:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1119 comm="apparmor_parser" [ 13.084406] type=1400 audit(1284211425.757:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1119 comm="apparmor_parser" [ 13.234062] type=1400 audit(1284211425.907:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1118 comm="apparmor_parser" [ 13.255278] type=1400 audit(1284211425.927:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1120 comm="apparmor_parser" [ 13.259214] type=1400 audit(1284211425.927:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1120 comm="apparmor_parser" [ 13.261831] type=1400 audit(1284211425.937:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1120 comm="apparmor_parser" [ 13.267317] type=1400 audit(1284211425.937:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1122 comm="apparmor_parser" [ 13.267718] type=1400 audit(1284211425.937:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1122 comm="apparmor_parser" [ 13.275242] type=1400 audit(1284211425.947:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1123 comm="apparmor_parser" [ 14.066678] alloc irq_desc for 41 on node 0 [ 14.066683] alloc kstat_irqs on node 0 [ 14.066695] forcedeth 0000:00:08.0: irq 41 for MSI/MSI-X