[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 (Ubuntu 2.6.32-22.36-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) [ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7ffb0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007ffb0000 (usable) [ 0.000000] modified: 000000007ffb0000 - 000000007ffc0000 (ACPI data) [ 0.000000] modified: 000000007ffc0000 - 000000007fff0000 (ACPI NVS) [ 0.000000] modified: 000000007fff0000 - 0000000080000000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff380000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37859000 - 37fef601 [ 0.000000] Allocated new RAMDISK: 008de000 - 01074601 [ 0.000000] Move RAMDISK from 0000000037859000 - 0000000037fef600 to 008de000 - 01074600 [ 0.000000] ACPI: RSDP 000fa2f0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 7ffb0000 00034 (v01 A_M_I OEMRSDT 12000710 MSFT 00000097) [ 0.000000] ACPI: FACP 7ffb0200 00084 (v02 A M I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI: DSDT 7ffb0440 0480F (v01 ASR69 ASR69113 00000113 INTL 02002026) [ 0.000000] ACPI: FACS 7ffc0000 00040 [ 0.000000] ACPI: APIC 7ffb0390 0006C (v01 A_M_I OEMAPIC 12000710 MSFT 00000097) [ 0.000000] ACPI: MCFG 7ffb0400 0003C (v01 A_M_I OEMMCFG 12000710 MSFT 00000097) [ 0.000000] ACPI: OEMB 7ffc0040 00046 (v01 A_M_I AMI_OEM 12000710 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1159MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd12f] BRK ==> [00008da000 - 00008dd12f] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008de000 - 0001074601] NEW RAMDISK ==> [00008de000 - 0001074601] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007ffb0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffb0 [ 0.000000] On node 0 totalpages: 524095 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1076200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2320 pages used for memmap [ 0.000000] HighMem zone: 294562 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ed00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36024 r0 d21320 u1048576 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519999 [ 0.000000] Kernel command line: root=UUID=7533b265-86fb-4dbf-b9e0-7f17e3be0de5 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10483840 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0007ffb0) [ 0.000000] Memory: 2051612k/2096832k available (4673k kernel code, 43536k reserved, 2121k data, 656k init, 1187528k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590663 - 0xc07a2e48 (2121 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590663 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1994.614 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.22 BogoMIPS (lpj=7978456) [ 0.004025] Security Framework initialized [ 0.004051] AppArmor: AppArmor initialized [ 0.004059] Mount-cache hash table entries: 512 [ 0.004205] Initializing cgroup subsys ns [ 0.004210] Initializing cgroup subsys cpuacct [ 0.004215] Initializing cgroup subsys memory [ 0.004223] Initializing cgroup subsys devices [ 0.004225] Initializing cgroup subsys freezer [ 0.004228] Initializing cgroup subsys net_cls [ 0.004249] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004252] CPU: L2 cache: 1024K [ 0.004255] CPU: Physical Processor ID: 0 [ 0.004257] CPU: Processor Core ID: 0 [ 0.004261] mce: CPU supports 6 MCE banks [ 0.004271] CPU0: Thermal monitoring enabled (TM2) [ 0.004276] using mwait in idle threads. [ 0.004283] Performance Events: Core2 events, Intel PMU driver. [ 0.004293] ... version: 2 [ 0.004295] ... bit width: 40 [ 0.004297] ... generic registers: 2 [ 0.004299] ... value mask: 000000ffffffffff [ 0.004301] ... max period: 000000007fffffff [ 0.004303] ... fixed-purpose events: 3 [ 0.004305] ... event mask: 0000000700000003 [ 0.004309] Checking 'hlt' instruction... OK. [ 0.022794] ACPI: Core revision 20090903 [ 0.032012] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.032017] ftrace: allocating 21771 entries in 43 pages [ 0.036067] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.036382] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.079341] CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d [ 0.080001] APIC calibration not consistent with PM-Timer: 116ms instead of 100ms [ 0.080001] APIC delta adjusted to PM-Timer: 1246546 (1446079) [ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 1024K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.164033] CPU1: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d [ 0.164045] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.168020] Brought up 2 CPUs [ 0.168023] Total of 2 processors activated (7978.16 BogoMIPS). [ 0.168400] CPU0 attaching sched-domain: [ 0.168403] domain 0: span 0-1 level MC [ 0.168406] groups: 0 1 [ 0.168413] CPU1 attaching sched-domain: [ 0.168415] domain 0: span 0-1 level MC [ 0.168417] groups: 1 0 [ 0.168527] devtmpfs: initialized [ 0.168527] regulator: core version 0.5 [ 0.168527] Time: 2:52:40 Date: 09/06/10 [ 0.168527] NET: Registered protocol family 16 [ 0.168527] Trying to unpack rootfs image as initramfs... [ 0.168527] EISA bus registered [ 0.168527] ACPI: bus type pci registered [ 0.168527] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support. [ 0.168527] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.168527] PCI: Not using MMCONFIG. [ 0.168527] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.168527] PCI: Using configuration type 1 for base access [ 0.172138] bio: create slab at 0 [ 0.172936] ACPI: EC: Look up EC in DSDT [ 0.176402] ACPI: Executed 1 blocks of module-level executable AML code [ 0.180828] ACPI: Interpreter enabled [ 0.180842] ACPI: (supports S0 S1 S4 S5) [ 0.180867] ACPI: Using IOAPIC for interrupt routing [ 0.188927] ACPI Warning: Incorrect checksum in table [OEMB] - 0E, should be FF (20090903/tbutils-314) [ 0.189039] ACPI: No dock devices found. [ 0.189327] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.189462] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.189466] pci 0000:00:01.0: PME# disabled [ 0.189534] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf96fc000-0xf96fffff] [ 0.189580] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.189584] pci 0000:00:1b.0: PME# disabled [ 0.189650] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.189654] pci 0000:00:1c.0: PME# disabled [ 0.189729] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.189733] pci 0000:00:1c.1: PME# disabled [ 0.189785] pci 0000:00:1d.0: reg 20 io port: [0xb480-0xb49f] [ 0.189838] pci 0000:00:1d.1: reg 20 io port: [0xb800-0xb81f] [ 0.189890] pci 0000:00:1d.2: reg 20 io port: [0xb880-0xb89f] [ 0.189942] pci 0000:00:1d.3: reg 20 io port: [0xbc00-0xbc1f] [ 0.189999] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf96fbc00-0xf96fbfff] [ 0.190055] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.190060] pci 0000:00:1d.7: PME# disabled [ 0.190197] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.190204] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.190208] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.190212] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff) [ 0.190259] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.190266] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.190273] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7] [ 0.190281] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb] [ 0.190288] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.190334] pci 0000:00:1f.2: reg 10 io port: [0xb400-0xb407] [ 0.190340] pci 0000:00:1f.2: reg 14 io port: [0xb080-0xb083] [ 0.190347] pci 0000:00:1f.2: reg 18 io port: [0xb000-0xb007] [ 0.190353] pci 0000:00:1f.2: reg 1c io port: [0xac00-0xac03] [ 0.190360] pci 0000:00:1f.2: reg 20 io port: [0xa880-0xa88f] [ 0.190388] pci 0000:00:1f.2: PME# supported from D3hot [ 0.190392] pci 0000:00:1f.2: PME# disabled [ 0.190440] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.190497] pci 0000:04:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.190508] pci 0000:04:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.190518] pci 0000:04:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] [ 0.190525] pci 0000:04:00.0: reg 24 io port: [0xec00-0xec7f] [ 0.190531] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xfebe0000-0xfebfffff] [ 0.190597] pci 0000:00:01.0: bridge io port: [0xe000-0xefff] [ 0.190600] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfebfffff] [ 0.190606] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.190650] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff] [ 0.190654] pci 0000:00:1c.0: bridge 32bit mmio: [0xf9800000-0xf9ffffff] [ 0.190661] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xce000000-0xcfffffff] [ 0.190720] pci 0000:01:00.0: reg 10 io port: [0xc800-0xc8ff] [ 0.190745] pci 0000:01:00.0: reg 18 64bit mmio: [0xf97ff000-0xf97fffff] [ 0.190769] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xf97c0000-0xf97dffff] [ 0.190821] pci 0000:01:00.0: supports D1 D2 [ 0.190824] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.190830] pci 0000:01:00.0: PME# disabled [ 0.190876] pci 0000:00:1c.1: bridge io port: [0xc000-0xcfff] [ 0.190880] pci 0000:00:1c.1: bridge 32bit mmio: [0xf9700000-0xf97fffff] [ 0.190936] pci 0000:00:1e.0: transparent bridge [ 0.190963] pci_bus 0000:00: on NUMA node 0 [ 0.190968] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.191127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.191188] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.191294] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.191354] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.195206] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.195317] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.195428] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.195535] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.195641] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.195749] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.195864] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.195973] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.196129] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.196133] vgaarb: loaded [ 0.196271] SCSI subsystem initialized [ 0.196382] libata version 3.00 loaded. [ 0.196467] usbcore: registered new interface driver usbfs [ 0.196481] usbcore: registered new interface driver hub [ 0.196516] usbcore: registered new device driver usb [ 0.196665] ACPI: WMI: Mapper loaded [ 0.196667] PCI: Using ACPI for IRQ routing [ 0.196864] NetLabel: Initializing [ 0.196866] NetLabel: domain hash size = 128 [ 0.196868] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.196881] NetLabel: unlabeled traffic allowed by default [ 0.197034] hpet clockevent registered [ 0.197037] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.197043] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.197048] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.200150] Switching to clocksource tsc [ 0.202534] AppArmor: AppArmor Filesystem Enabled [ 0.202556] pnp: PnP ACPI init [ 0.202579] ACPI: bus type pnp registered [ 0.207618] pnp: PnP ACPI: found 19 devices [ 0.207622] ACPI: ACPI bus type pnp unregistered [ 0.207627] PnPBIOS: Disabled by ACPI PNP [ 0.207644] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved [ 0.207654] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.207658] system 00:09: ioport range 0x800-0x87f has been reserved [ 0.207661] system 00:09: ioport range 0x480-0x4bf has been reserved [ 0.207664] system 00:09: ioport range 0x900-0x90f has been reserved [ 0.207667] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.207670] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.207698] system 00:0b: iomem range 0xffc00000-0xfff7ffff has been reserved [ 0.207704] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.207707] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.207715] system 00:10: ioport range 0x290-0x29f has been reserved [ 0.207721] system 00:11: iomem range 0xe0000000-0xefffffff has been reserved [ 0.207728] system 00:12: iomem range 0x0-0x9ffff could not be reserved [ 0.207731] system 00:12: iomem range 0xc0000-0xcffff could not be reserved [ 0.207734] system 00:12: iomem range 0xe0000-0xfffff could not be reserved [ 0.207737] system 00:12: iomem range 0x100000-0x7fffffff could not be reserved [ 0.242497] pci 0000:00:01.0: PCI bridge, secondary bus 0000:04 [ 0.242503] pci 0000:00:01.0: IO window: 0xe000-0xefff [ 0.242508] pci 0000:00:01.0: MEM window: 0xfa000000-0xfebfffff [ 0.242512] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.242518] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.242521] pci 0000:00:1c.0: IO window: 0xd000-0xdfff [ 0.242528] pci 0000:00:1c.0: MEM window: 0xf9800000-0xf9ffffff [ 0.242532] pci 0000:00:1c.0: PREFETCH window: 0x000000ce000000-0x000000cfffffff [ 0.242539] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:01 [ 0.242542] pci 0000:00:1c.1: IO window: 0xc000-0xcfff [ 0.242548] pci 0000:00:1c.1: MEM window: 0xf9700000-0xf97fffff [ 0.242552] pci 0000:00:1c.1: PREFETCH window: 0x00000080000000-0x000000801fffff [ 0.242559] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.242561] pci 0000:00:1e.0: IO window: disabled [ 0.242566] pci 0000:00:1e.0: MEM window: disabled [ 0.242570] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.242591] alloc irq_desc for 16 on node -1 [ 0.242593] alloc kstat_irqs on node -1 [ 0.242602] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.242607] pci 0000:00:01.0: setting latency timer to 64 [ 0.242616] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.242621] pci 0000:00:1c.0: setting latency timer to 64 [ 0.242629] alloc irq_desc for 17 on node -1 [ 0.242631] alloc kstat_irqs on node -1 [ 0.242635] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.242639] pci 0000:00:1c.1: setting latency timer to 64 [ 0.242646] pci 0000:00:1e.0: setting latency timer to 64 [ 0.242651] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.242654] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.242657] pci_bus 0000:04: resource 0 io: [0xe000-0xefff] [ 0.242659] pci_bus 0000:04: resource 1 mem: [0xfa000000-0xfebfffff] [ 0.242662] pci_bus 0000:04: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.242665] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.242668] pci_bus 0000:02: resource 1 mem: [0xf9800000-0xf9ffffff] [ 0.242670] pci_bus 0000:02: resource 2 pref mem [0xce000000-0xcfffffff] [ 0.242673] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.242676] pci_bus 0000:01: resource 1 mem: [0xf9700000-0xf97fffff] [ 0.242679] pci_bus 0000:01: resource 2 pref mem [0x80000000-0x801fffff] [ 0.242681] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.242684] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff] [ 0.242730] NET: Registered protocol family 2 [ 0.242851] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.243204] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.243925] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.244339] TCP: Hash tables configured (established 131072 bind 65536) [ 0.244343] TCP reno registered [ 0.244490] NET: Registered protocol family 1 [ 0.244623] pci 0000:04:00.0: Boot video device [ 0.244856] cpufreq-nforce2: No nForce2 chipset. [ 0.244886] Scanning for low memory corruption every 60 seconds [ 0.245016] audit: initializing netlink socket (disabled) [ 0.245029] type=2000 audit(1283741560.243:1): initialized [ 0.255155] highmem bounce pool size: 64 pages [ 0.255161] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.256805] VFS: Disk quotas dquot_6.5.2 [ 0.256878] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.257514] fuse init (API version 7.13) [ 0.257611] msgmni has been set to 1690 [ 0.257883] alg: No test for stdrng (krng) [ 0.257950] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.257954] io scheduler noop registered [ 0.257956] io scheduler anticipatory registered [ 0.257958] io scheduler deadline registered [ 0.257999] io scheduler cfq registered (default) [ 0.258145] alloc irq_desc for 24 on node -1 [ 0.258148] alloc kstat_irqs on node -1 [ 0.258157] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.258164] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.258260] alloc irq_desc for 25 on node -1 [ 0.258262] alloc kstat_irqs on node -1 [ 0.258270] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.258279] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.258389] alloc irq_desc for 26 on node -1 [ 0.258391] alloc kstat_irqs on node -1 [ 0.258398] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.258406] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.258485] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.258506] Firmware did not grant requested _OSC control [ 0.258523] Firmware did not grant requested _OSC control [ 0.258551] Firmware did not grant requested _OSC control [ 0.258564] Firmware did not grant requested _OSC control [ 0.258578] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.258693] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.258697] ACPI: Power Button [PWRB] [ 0.258747] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.258750] ACPI: Power Button [PWRF] [ 0.259062] processor LNXCPU:00: registered as cooling_device0 [ 0.259100] processor LNXCPU:01: registered as cooling_device1 [ 0.263041] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.263150] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.263247] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.263757] 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.264897] brd: module loaded [ 0.265399] loop: module loaded [ 0.265509] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.265639] ata_piix 0000:00:1f.1: version 2.13 [ 0.265660] alloc irq_desc for 18 on node -1 [ 0.265662] alloc kstat_irqs on node -1 [ 0.265670] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.265715] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.265847] scsi0 : ata_piix [ 0.265947] isapnp: Scanning for PnP cards... [ 0.315092] scsi1 : ata_piix [ 0.316447] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.316451] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.316497] alloc irq_desc for 19 on node -1 [ 0.316499] alloc kstat_irqs on node -1 [ 0.316508] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.316514] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.316558] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.360222] scsi2 : ata_piix [ 0.367297] Freeing initrd memory: 7769k freed [ 0.371317] ata2: port disabled. ignoring. [ 0.403912] scsi3 : ata_piix [ 0.404005] ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 19 [ 0.404008] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 19 [ 0.404425] Fixed MDIO Bus: probed [ 0.404462] PPP generic driver version 2.4.2 [ 0.404546] tun: Universal TUN/TAP device driver, 1.6 [ 0.404548] tun: (C) 1999-2004 Max Krasnyansky [ 0.404660] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.404690] alloc irq_desc for 23 on node -1 [ 0.404692] alloc kstat_irqs on node -1 [ 0.404701] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.404721] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.404725] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.404758] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.404779] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.404790] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.408683] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.408704] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf96fbc00 [ 0.423666] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.423776] usb usb1: configuration #1 chosen from 1 choice [ 0.423805] hub 1-0:1.0: USB hub found [ 0.423813] hub 1-0:1.0: 8 ports detected [ 0.423883] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.423899] uhci_hcd: USB Universal Host Controller Interface driver [ 0.423947] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.423954] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.423957] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.423991] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.424015] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480 [ 0.424108] usb usb2: configuration #1 chosen from 1 choice [ 0.424134] hub 2-0:1.0: USB hub found [ 0.424141] hub 2-0:1.0: 2 ports detected [ 0.424188] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.424194] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.424198] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.424234] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.424257] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800 [ 0.424345] usb usb3: configuration #1 chosen from 1 choice [ 0.424370] hub 3-0:1.0: USB hub found [ 0.424377] hub 3-0:1.0: 2 ports detected [ 0.424419] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.424425] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.424429] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.424460] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.424490] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880 [ 0.424583] usb usb4: configuration #1 chosen from 1 choice [ 0.424608] hub 4-0:1.0: USB hub found [ 0.424615] hub 4-0:1.0: 2 ports detected [ 0.424660] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.424666] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.424669] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.424709] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.424739] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00 [ 0.424826] usb usb5: configuration #1 chosen from 1 choice [ 0.424851] hub 5-0:1.0: USB hub found [ 0.424858] hub 5-0:1.0: 2 ports detected [ 0.424969] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.427538] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.427544] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.427679] mice: PS/2 mouse device common for all mice [ 0.427806] rtc_cmos 00:03: RTC can wake from S4 [ 0.427847] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.427872] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 0.427988] device-mapper: uevent: version 1.0.3 [ 0.428097] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.428160] device-mapper: multipath: version 1.1.0 loaded [ 0.428163] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.428280] EISA: Probing bus 0 at eisa.0 [ 0.428308] EISA: Detected 0 cards. [ 0.428389] cpuidle: using governor ladder [ 0.428391] cpuidle: using governor menu [ 0.428865] TCP cubic registered [ 0.429024] NET: Registered protocol family 10 [ 0.429536] lo: Disabled Privacy Extensions [ 0.429893] NET: Registered protocol family 17 [ 0.429950] Using IPI No-Shortcut mode [ 0.430030] PM: Resume from disk failed. [ 0.430043] registered taskstats version 1 [ 0.430356] Magic number: 10:17:864 [ 0.430461] rtc_cmos 00:03: setting system clock to 2010-09-06 02:52:41 UTC (1283741561) [ 0.430464] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.430466] EDD information not available. [ 0.446552] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.583909] ata4.01: NODEV after polling detection [ 0.591838] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100 [ 0.607858] ata4.00: configured for UDMA/100 [ 0.609765] ata3.00: ATA-7: WDC WD1600AABS-00PRA0, 05.06H05, max UDMA/133 [ 0.609768] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.624259] ata3.00: configured for UDMA/133 [ 0.625378] isapnp: No Plug & Play device found [ 0.625516] scsi 2:0:0:0: Direct-Access ATA WDC WD1600AABS-0 05.0 PQ: 0 ANSI: 5 [ 0.625647] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 0.625658] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 0.625699] sd 2:0:0:0: [sda] Write Protect is off [ 0.625701] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.625824] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.625983] sda: [ 0.629062] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5 [ 0.634629] sda1 sda2 [ 0.657041] sd 2:0:0:0: [sda] Attached SCSI disk [ 0.657055] Freeing unused kernel memory: 656k freed [ 0.657388] Write protecting the kernel text: 4676k [ 0.657433] Write protecting the kernel read-only data: 1840k [ 0.675781] udev: starting version 151 [ 0.747664] usb 1-6: new high speed USB device using ehci_hcd and address 2 [ 0.776867] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 0.776895] r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.776948] r8169 0000:01:00.0: setting latency timer to 64 [ 0.777015] alloc irq_desc for 27 on node -1 [ 0.777017] alloc kstat_irqs on node -1 [ 0.777035] r8169 0000:01:00.0: irq 27 for MSI/MSI-X [ 0.777755] eth0: RTL8101e at 0xf8058000, 00:19:66:65:f8:54, XID 94200000 IRQ 27 [ 0.795253] Floppy drive(s): fd0 is 1.44M [ 0.815284] FDC 0 is a post-1991 82077 [ 0.887339] usb 1-6: configuration #1 chosen from 1 choice [ 1.013843] kjournald starting. Commit interval 5 seconds [ 1.013850] EXT3-fs: mounted filesystem with ordered data mode. [ 28.846199] Adding 6032368k swap on /dev/sda5. Priority:-1 extents:1 across:6032368k [ 29.113480] udev: starting version 151 [ 29.412960] EXT3 FS on sda1, internal journal [ 29.449872] type=1505 audit(1283741590.517:2): operation="profile_load" pid=535 name="/sbin/dhclient3" [ 29.450584] type=1505 audit(1283741590.517:3): operation="profile_load" pid=535 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 29.450973] type=1505 audit(1283741590.517:4): operation="profile_load" pid=535 name="/usr/lib/connman/scripts/dhclient-script" [ 29.541946] parport_pc 00:08: reported by Plug and Play ACPI [ 29.542006] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 29.637228] ppdev: user-space parallel port driver [ 29.707987] lp0: using parport0 (interrupt-driven). [ 30.233463] Linux agpgart interface v0.103 [ 30.240038] intel_rng: FWH not detected [ 30.324521] vga16fb: initializing [ 30.324526] vga16fb: mapped to 0xc00a0000 [ 30.324599] fb0: VGA16 VGA frame buffer device [ 30.456478] cfg80211: Calling CRDA to update world regulatory domain [ 30.472319] psmouse serio1: ID: 10 00 64 [ 30.696181] type=1505 audit(1283741591.765:5): operation="profile_load" pid=686 name="/usr/share/gdm/guest-session/Xsession" [ 30.698116] type=1505 audit(1283741591.765:6): operation="profile_replace" pid=687 name="/sbin/dhclient3" [ 30.698825] type=1505 audit(1283741591.765:7): operation="profile_replace" pid=687 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 30.699244] type=1505 audit(1283741591.765:8): operation="profile_replace" pid=687 name="/usr/lib/connman/scripts/dhclient-script" [ 30.703591] type=1505 audit(1283741591.769:9): operation="profile_load" pid=688 name="/usr/bin/evince" [ 30.712646] type=1505 audit(1283741591.781:10): operation="profile_load" pid=688 name="/usr/bin/evince-previewer" [ 30.719146] type=1505 audit(1283741591.785:11): operation="profile_load" pid=688 name="/usr/bin/evince-thumbnailer" [ 30.734520] cfg80211: World regulatory domain updated: [ 30.734524] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 30.734528] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 30.734530] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 30.734533] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 30.734536] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 30.734538] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 30.927527] nvidia: module license 'NVIDIA' taints kernel. [ 30.927532] Disabling lock debugging due to kernel taint [ 31.063682] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 31.997709] nvidia 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 31.997719] nvidia 0000:04:00.0: setting latency timer to 64 [ 31.997725] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 31.998083] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010 [ 32.189628] Console: switching to colour frame buffer device 80x30 [ 32.190642] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac) [ 32.190644] apm: disabled - APM is not SMP safe. [ 32.244705] r8169: eth0: link down [ 32.244949] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 32.562091] phy0: Selected rate control algorithm 'minstrel' [ 32.562944] phy0: hwaddr 00:18:e7:4a:27:c2, RTL8187BvE V0 + rtl8225z2, rfkill mask 2 [ 32.593980] rtl8187: Customer ID is 0x00 [ 32.594041] Registered led device: rtl8187-phy0::tx [ 32.594060] Registered led device: rtl8187-phy0::rx [ 32.595226] rtl8187: wireless switch is on [ 32.595272] usbcore: registered new interface driver rtl8187 [ 32.672481] udev: renamed network interface wlan0 to wlan1 [ 32.809051] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 32.809114] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 33.202476] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 34.336006] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x00bb2000 [ 36.558430] ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 38.192983] CPU0 attaching NULL sched-domain. [ 38.192990] CPU1 attaching NULL sched-domain. [ 38.232704] CPU0 attaching sched-domain: [ 38.232709] domain 0: span 0-1 level MC [ 38.232712] groups: 0 1 [ 38.232719] CPU1 attaching sched-domain: [ 38.232721] domain 0: span 0-1 level MC [ 38.232723] groups: 1 0 [ 46.073293] wlan1: deauthenticating from 00:11:50:ae:f5:6a by local choice (reason=3) [ 46.209236] wlan1: direct probe to AP 00:11:50:ae:f5:6a (try 1) [ 46.408018] wlan1: direct probe to AP 00:11:50:ae:f5:6a (try 2) [ 46.410603] wlan1: direct probe responded [ 46.410605] wlan1: authenticate with AP 00:11:50:ae:f5:6a (try 1) [ 46.412484] wlan1: authenticated [ 46.412506] wlan1: associate with AP 00:11:50:ae:f5:6a (try 1) [ 46.416352] wlan1: RX AssocResp from 00:11:50:ae:f5:6a (capab=0x421 status=0 aid=1) [ 46.416355] wlan1: associated [ 46.422174] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 56.700007] wlan1: no IPv6 routers present [ 98.719834] __ratelimit: 15 callbacks suppressed [ 98.719839] apt-check[1685]: segfault at d1c35d90 ip 00918470 sp bfc12ff0 error 5 in libapt-pkg-libc6.10-6.so.4.8.0[8e2000+c8000] [ 167.219376] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 167.219380] ata3.00: BMDMA stat 0x26 [ 167.219385] ata3.00: failed command: WRITE DMA [ 167.219390] ata3.00: cmd ca/00:50:2f:31:f0/00:00:00:00:00/e8 tag 0 dma 40960 out [ 167.219392] res 51/84:40:3f:31:f0/00:00:00:00:00/e8 Emask 0x30 (host bus error) [ 167.219395] ata3.00: status: { DRDY ERR } [ 167.219397] ata3.00: error: { ICRC ABRT } [ 167.219407] ata3: soft resetting link [ 167.412828] ata3.00: configured for UDMA/133 [ 167.412841] ata3: EH complete [ 337.236028] end_request: I/O error, dev fd0, sector 0 [ 337.264027] end_request: I/O error, dev fd0, sector 0 [ 655.202925] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 655.202931] ata3.00: BMDMA stat 0x26 [ 655.202937] ata3.00: failed command: WRITE DMA [ 655.202943] ata3.00: cmd ca/00:20:47:00:b4/00:00:00:00:00/e0 tag 0 dma 16384 out [ 655.202944] res 51/84:10:57:00:b4/00:00:00:00:00/e0 Emask 0x30 (host bus error) [ 655.202948] ata3.00: status: { DRDY ERR } [ 655.202950] ata3.00: error: { ICRC ABRT } [ 655.202963] ata3: soft resetting link [ 655.401154] ata3.00: configured for UDMA/133 [ 655.401169] ata3: EH complete [ 1123.005339] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1123.005344] ata3.00: BMDMA stat 0x26 [ 1123.005348] ata3.00: failed command: WRITE DMA [ 1123.005354] ata3.00: cmd ca/00:90:0f:81:f0/00:00:00:00:00/e8 tag 0 dma 73728 out [ 1123.005355] res 51/84:40:5f:81:f0/00:00:00:00:00/e8 Emask 0x30 (host bus error) [ 1123.005358] ata3.00: status: { DRDY ERR } [ 1123.005360] ata3.00: error: { ICRC ABRT } [ 1123.005370] ata3: soft resetting link [ 1123.209164] ata3.00: configured for UDMA/133 [ 1123.209183] ata3: EH complete [ 1124.607894] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1124.607899] ata3.00: BMDMA stat 0x26 [ 1124.607903] ata3.00: failed command: WRITE DMA [ 1124.607909] ata3.00: cmd ca/00:68:87:82:f0/00:00:00:00:00/e8 tag 0 dma 53248 out [ 1124.607910] res 51/84:08:e7:82:f0/00:00:00:00:00/e8 Emask 0x30 (host bus error) [ 1124.607913] ata3.00: status: { DRDY ERR } [ 1124.607916] ata3.00: error: { ICRC ABRT } [ 1124.607926] ata3: soft resetting link [ 1124.808561] ata3.00: configured for UDMA/133 [ 1124.808580] ata3: EH complete [ 1194.151845] ata3.00: limiting speed to UDMA/100:PIO4 [ 1194.151851] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1194.151855] ata3.00: BMDMA stat 0x26 [ 1194.151859] ata3.00: failed command: WRITE DMA [ 1194.151865] ata3.00: cmd ca/00:58:17:ef:e5/00:00:00:00:00/e9 tag 0 dma 45056 out [ 1194.151866] res 51/84:48:27:ef:e5/00:00:00:00:00/e9 Emask 0x30 (host bus error) [ 1194.151869] ata3.00: status: { DRDY ERR } [ 1194.151872] ata3.00: error: { ICRC ABRT } [ 1194.151882] ata3: soft resetting link [ 1194.340479] ata3.00: configured for UDMA/100 [ 1194.340498] ata3: EH complete [ 1203.917480] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1203.917485] ata3.00: BMDMA stat 0x26 [ 1203.917489] ata3.00: failed command: WRITE DMA EXT [ 1203.917495] ata3.00: cmd 35/00:40:0f:60:0b/00:03:0a:00:00/e0 tag 0 dma 425984 out [ 1203.917496] res 51/84:50:ff:62:0b/84:00:0a:00:00/e0 Emask 0x30 (host bus error) [ 1203.917499] ata3.00: status: { DRDY ERR } [ 1203.917502] ata3.00: error: { ICRC ABRT } [ 1203.917512] ata3: soft resetting link [ 1204.113050] ata3.00: configured for UDMA/100 [ 1204.113062] ata3: EH complete [ 1213.928166] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1213.928171] ata3.00: BMDMA stat 0x26 [ 1213.928175] ata3.00: failed command: WRITE DMA EXT [ 1213.928181] ata3.00: cmd 35/00:c8:b7:7a:0d/00:02:0a:00:00/e0 tag 0 dma 364544 out [ 1213.928182] res 51/84:15:6a:7d:0d/84:00:0a:00:00/e0 Emask 0x30 (host bus error) [ 1213.928185] ata3.00: status: { DRDY ERR } [ 1213.928188] ata3.00: error: { ICRC ABRT } [ 1213.928198] ata3: soft resetting link [ 1214.136840] ata3.00: configured for UDMA/100 [ 1214.136853] ata3: EH complete [ 1217.084706] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1217.084713] ata3.00: BMDMA stat 0x26 [ 1217.084717] ata3.00: failed command: WRITE DMA EXT [ 1217.084723] ata3.00: cmd 35/00:00:c7:ea:0f/00:04:0a:00:00/e0 tag 0 dma 524288 out [ 1217.084724] res 51/84:a9:1e:ec:0f/84:02:0a:00:00/e0 Emask 0x30 (host bus error) [ 1217.084727] ata3.00: status: { DRDY ERR } [ 1217.084730] ata3.00: error: { ICRC ABRT } [ 1217.084742] ata3: soft resetting link [ 1217.276601] ata3.00: configured for UDMA/100 [ 1217.276622] ata3: EH complete [ 1217.315145] ata3.00: limiting speed to UDMA/33:PIO4 [ 1217.315150] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1217.315154] ata3.00: BMDMA stat 0x26 [ 1217.315158] ata3.00: failed command: WRITE DMA EXT [ 1217.315164] ata3.00: cmd 35/00:00:c7:ee:0f/00:04:0a:00:00/e0 tag 0 dma 524288 out [ 1217.315165] res 51/84:1a:ad:f2:0f/84:00:0a:00:00/e0 Emask 0x30 (host bus error) [ 1217.315168] ata3.00: status: { DRDY ERR } [ 1217.315171] ata3.00: error: { ICRC ABRT } [ 1217.315180] ata3: soft resetting link [ 1217.520804] ata3.00: configured for UDMA/33 [ 1217.520822] ata3: EH complete [ 1217.684537] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1217.684542] ata3.00: BMDMA stat 0x26 [ 1217.684546] ata3.00: failed command: WRITE DMA EXT [ 1217.684551] ata3.00: cmd 35/00:50:37:36:10/00:03:0a:00:00/e0 tag 0 dma 434176 out [ 1217.684553] res 51/84:90:f7:38:10/84:00:0a:00:00/e0 Emask 0x30 (host bus error) [ 1217.684556] ata3.00: status: { DRDY ERR } [ 1217.684558] ata3.00: error: { ICRC ABRT } [ 1217.684568] ata3: soft resetting link [ 1217.877147] ata3.00: configured for UDMA/33 [ 1217.877169] ata3: EH complete [ 1217.931745] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1217.931750] ata3.00: BMDMA stat 0x26 [ 1217.931754] ata3.00: failed command: WRITE DMA EXT [ 1217.931760] ata3.00: cmd 35/00:50:1f:4c:10/00:01:0a:00:00/e0 tag 0 dma 172032 out [ 1217.931762] res 51/84:20:4f:4c:10/84:01:0a:00:00/e0 Emask 0x30 (host bus error) [ 1217.931765] ata3.00: status: { DRDY ERR } [ 1217.931767] ata3.00: error: { ICRC ABRT } [ 1217.931777] ata3: soft resetting link [ 1218.121320] ata3.00: configured for UDMA/33 [ 1218.121333] ata3: EH complete [ 1218.262024] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1218.262030] ata3.00: BMDMA stat 0x26 [ 1218.262034] ata3.00: failed command: WRITE DMA EXT [ 1218.262040] ata3.00: cmd 35/00:e0:bf:48:11/00:02:0a:00:00/e0 tag 0 dma 376832 out [ 1218.262042] res 51/84:fe:a1:4a:11/84:00:0a:00:00/e0 Emask 0x30 (host bus error) [ 1218.262045] ata3.00: status: { DRDY ERR } [ 1218.262047] ata3.00: error: { ICRC ABRT } [ 1218.262058] ata3: soft resetting link [ 1218.452617] ata3.00: configured for UDMA/33 [ 1218.452630] ata3: EH complete [ 1218.502205] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1218.502211] ata3.00: BMDMA stat 0x26 [ 1218.502214] ata3.00: failed command: WRITE DMA EXT [ 1218.502220] ata3.00: cmd 35/00:00:57:4f:11/00:04:0a:00:00/e0 tag 0 dma 524288 out [ 1218.502222] res 51/84:ea:6d:52:11/84:00:0a:00:00/e0 Emask 0x30 (host bus error) [ 1218.502225] ata3.00: status: { DRDY ERR } [ 1218.502227] ata3.00: error: { ICRC ABRT } [ 1218.502237] ata3: soft resetting link [ 1218.692830] ata3.00: configured for UDMA/33 [ 1218.692843] ata3: EH complete [ 1218.785945] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1218.785950] ata3.00: BMDMA stat 0x26 [ 1218.785954] ata3.00: failed command: WRITE DMA EXT [ 1218.785960] ata3.00: cmd 35/00:00:1f:5d:14/00:04:0a:00:00/e0 tag 0 dma 524288 out [ 1218.785961] res 51/84:c5:5a:60:14/84:00:0a:00:00/e0 Emask 0x30 (host bus error) [ 1218.785964] ata3.00: status: { DRDY ERR } [ 1218.785967] ata3.00: error: { ICRC ABRT } [ 1218.785977] ata3: soft resetting link [ 1218.977078] ata3.00: configured for UDMA/33 [ 1218.977098] ata3: EH complete [ 1219.005624] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1219.005629] ata3.00: BMDMA stat 0x26 [ 1219.005633] ata3.00: failed command: WRITE DMA EXT [ 1219.005639] ata3.00: cmd 35/00:20:1f:61:14/00:02:0a:00:00/e0 tag 0 dma 278528 out [ 1219.005640] res 51/84:5b:e4:61:14/84:01:0a:00:00/e0 Emask 0x30 (host bus error) [ 1219.005643] ata3.00: status: { DRDY ERR } [ 1219.005645] ata3.00: error: { ICRC ABRT } [ 1219.005655] ata3: soft resetting link [ 1219.209303] ata3.00: configured for UDMA/33 [ 1219.209321] ata3: EH complete [ 1219.370056] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1219.370061] ata3.00: BMDMA stat 0x26 [ 1219.370065] ata3.00: failed command: WRITE DMA EXT [ 1219.370071] ata3.00: cmd 35/00:40:3f:40:15/00:01:0a:00:00/e0 tag 0 dma 163840 out [ 1219.370072] res 51/84:d0:af:40:15/84:00:0a:00:00/e0 Emask 0x30 (host bus error) [ 1219.370075] ata3.00: status: { DRDY ERR } [ 1219.370077] ata3.00: error: { ICRC ABRT } [ 1219.370087] ata3: soft resetting link [ 1219.560586] ata3.00: configured for UDMA/33 [ 1219.560598] ata3: EH complete [ 1219.645214] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1219.645219] ata3.00: BMDMA stat 0x26 [ 1219.645223] ata3.00: failed command: WRITE DMA EXT [ 1219.645229] ata3.00: cmd 35/00:a8:bf:06:16/00:03:0a:00:00/e0 tag 0 dma 479232 out [ 1219.645230] res 51/84:68:ff:09:16/84:00:0a:00:00/e0 Emask 0x30 (host bus error) [ 1219.645233] ata3.00: status: { DRDY ERR } [ 1219.645235] ata3.00: error: { ICRC ABRT } [ 1219.645245] ata3: soft resetting link [ 1219.836827] ata3.00: configured for UDMA/33 [ 1219.836839] ata3: EH complete [ 1219.916507] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1219.916513] ata3.00: BMDMA stat 0x26 [ 1219.916517] ata3.00: failed command: WRITE DMA EXT [ 1219.916523] ata3.00: cmd 35/00:38:57:8d:f0/00:01:08:00:00/e0 tag 0 dma 159744 out [ 1219.916525] res 51/84:c8:c7:8d:f0/84:00:08:00:00/e0 Emask 0x30 (host bus error) [ 1219.916528] ata3.00: status: { DRDY ERR } [ 1219.916530] ata3.00: error: { ICRC ABRT } [ 1219.916541] ata3: soft resetting link [ 1220.113109] ata3.00: configured for UDMA/33 [ 1220.113123] ata3: EH complete [ 1221.618147] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1221.618152] ata3.00: BMDMA stat 0x26 [ 1221.618156] ata3.00: failed command: WRITE DMA [ 1221.618162] ata3.00: cmd ca/00:d0:c7:ec:e4/00:00:00:00:00/e9 tag 0 dma 106496 out [ 1221.618163] res 51/84:40:57:ed:e4/84:00:08:00:00/e9 Emask 0x30 (host bus error) [ 1221.618166] ata3.00: status: { DRDY ERR } [ 1221.618168] ata3.00: error: { ICRC ABRT } [ 1221.618178] ata3: soft resetting link [ 1221.808373] ata3.00: configured for UDMA/33 [ 1221.808385] ata3: EH complete [ 1221.944747] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1221.944752] ata3.00: BMDMA stat 0x26 [ 1221.944755] ata3.00: failed command: WRITE DMA EXT [ 1221.944761] ata3.00: cmd 35/00:00:67:da:23/00:04:0a:00:00/e0 tag 0 dma 524288 out [ 1221.944763] res 51/84:b6:b1:dd:23/84:00:0a:00:00/e0 Emask 0x30 (host bus error) [ 1221.944766] ata3.00: status: { DRDY ERR } [ 1221.944768] ata3.00: error: { ICRC ABRT } [ 1221.944778] ata3: soft resetting link [ 1222.136834] ata3.00: configured for UDMA/33 [ 1222.136847] ata3: EH complete [ 1222.174350] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1222.174355] ata3.00: BMDMA stat 0x26 [ 1222.174359] ata3.00: failed command: WRITE DMA EXT [ 1222.174365] ata3.00: cmd 35/00:00:67:de:23/00:04:0a:00:00/e0 tag 0 dma 524288 out [ 1222.174366] res 51/84:8f:d8:e0:23/84:01:0a:00:00/e0 Emask 0x30 (host bus error) [ 1222.174369] ata3.00: status: { DRDY ERR } [ 1222.174371] ata3.00: error: { ICRC ABRT } [ 1222.174381] ata3: soft resetting link [ 1222.369056] ata3.00: configured for UDMA/33 [ 1222.369075] ata3: EH complete [ 1222.462755] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1222.462760] ata3.00: BMDMA stat 0x26 [ 1222.462764] ata3.00: failed command: WRITE DMA EXT [ 1222.462770] ata3.00: cmd 35/00:00:57:f4:23/00:04:0a:00:00/e0 tag 0 dma 524288 out [ 1222.462772] res 51/84:c3:94:f7:23/84:00:0a:00:00/e0 Emask 0x30 (host bus error) [ 1222.462775] ata3.00: status: { DRDY ERR } [ 1222.462777] ata3.00: error: { ICRC ABRT } [ 1222.462787] ata3: soft resetting link [ 1222.661340] ata3.00: configured for UDMA/33 [ 1222.661359] ata3: EH complete [ 1223.033203] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1223.033208] ata3.00: BMDMA stat 0x26 [ 1223.033212] ata3.00: failed command: WRITE DMA EXT [ 1223.033218] ata3.00: cmd 35/00:e0:bf:88:e4/00:03:09:00:00/e0 tag 0 dma 507904 out [ 1223.033219] res 51/84:c0:df:89:e4/84:02:09:00:00/e0 Emask 0x30 (host bus error) [ 1223.033222] ata3.00: status: { DRDY ERR } [ 1223.033224] ata3.00: error: { ICRC ABRT } [ 1223.033234] ata3: soft resetting link [ 1223.228794] ata3.00: configured for UDMA/33 [ 1223.228806] ata3: EH complete [ 1223.349674] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1223.349679] ata3.00: BMDMA stat 0x26 [ 1223.349683] ata3.00: failed command: WRITE DMA EXT [ 1223.349689] ata3.00: cmd 35/00:00:bf:66:25/00:04:0a:00:00/e0 tag 0 dma 524288 out [ 1223.349690] res 51/84:74:4b:69:25/84:01:0a:00:00/e0 Emask 0x30 (host bus error) [ 1223.349693] ata3.00: status: { DRDY ERR } [ 1223.349696] ata3.00: error: { ICRC ABRT } [ 1223.349705] ata3: soft resetting link [ 1223.545063] ata3.00: configured for UDMA/33 [ 1223.545075] ata3: EH complete [ 1435.205425] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1435.205430] ata3.00: BMDMA stat 0x26 [ 1435.205434] ata3.00: failed command: WRITE DMA [ 1435.205440] ata3.00: cmd ca/00:10:07:41:de/00:00:00:00:00/e4 tag 0 dma 8192 out [ 1435.205441] res 51/84:01:16:41:de/84:01:0a:00:00/e4 Emask 0x30 (host bus error) [ 1435.205444] ata3.00: status: { DRDY ERR } [ 1435.205447] ata3.00: error: { ICRC ABRT } [ 1435.205457] ata3: soft resetting link [ 1435.396734] ata3.00: configured for UDMA/33 [ 1435.396747] ata3: EH complete [ 1795.212729] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1795.212734] ata3.00: BMDMA stat 0x26 [ 1795.212737] ata3.00: failed command: WRITE DMA [ 1795.212743] ata3.00: cmd ca/00:08:8f:00:f3/00:00:00:00:00/e2 tag 0 dma 4096 out [ 1795.212745] res 51/84:01:96:00:f3/84:01:0a:00:00/e2 Emask 0x30 (host bus error) [ 1795.212748] ata3.00: status: { DRDY ERR } [ 1795.212750] ata3.00: error: { ICRC ABRT } [ 1795.212760] ata3: soft resetting link [ 1795.469336] ata3.00: configured for UDMA/33 [ 1795.469350] ata3: EH complete [ 1813.882155] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1813.882160] ata3.00: BMDMA stat 0x26 [ 1813.882164] ata3.00: failed command: WRITE DMA [ 1813.882170] ata3.00: cmd ca/00:10:2f:7c:11/00:00:00:00:00/ea tag 0 dma 8192 out [ 1813.882172] res 51/84:01:3e:7c:11/84:01:0a:00:00/ea Emask 0x30 (host bus error) [ 1813.882175] ata3.00: status: { DRDY ERR } [ 1813.882177] ata3.00: error: { ICRC ABRT } [ 1813.882187] ata3: soft resetting link [ 1814.072612] ata3.00: configured for UDMA/33 [ 1814.072625] ata3: EH complete [ 1837.065455] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1837.065460] ata3.00: BMDMA stat 0x26 [ 1837.065464] ata3.00: failed command: WRITE DMA EXT [ 1837.065470] ata3.00: cmd 35/00:50:7f:e1:5b/00:02:0a:00:00/e0 tag 0 dma 303104 out [ 1837.065471] res 51/84:e8:e7:e1:5b/84:01:0a:00:00/e0 Emask 0x30 (host bus error) [ 1837.065474] ata3.00: status: { DRDY ERR } [ 1837.065477] ata3.00: error: { ICRC ABRT } [ 1837.065486] ata3: soft resetting link [ 1837.260941] ata3.00: configured for UDMA/33 [ 1837.260953] ata3: EH complete [ 1843.781160] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1843.781165] ata3.00: BMDMA stat 0x26 [ 1843.781169] ata3.00: failed command: WRITE DMA EXT [ 1843.781175] ata3.00: cmd 35/00:b8:b7:e6:5b/00:02:0a:00:00/e0 tag 0 dma 356352 out [ 1843.781176] res 51/84:c8:a7:e8:5b/84:00:0a:00:00/e0 Emask 0x30 (host bus error) [ 1843.781180] ata3.00: status: { DRDY ERR } [ 1843.781182] ata3.00: error: { ICRC ABRT } [ 1843.781192] ata3: soft resetting link [ 1843.976824] ata3.00: configured for UDMA/33 [ 1843.976837] ata3: EH complete [ 1843.981222] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1843.981227] ata3.00: BMDMA stat 0x26 [ 1843.981230] ata3.00: failed command: WRITE DMA EXT [ 1843.981236] ata3.00: cmd 35/00:b8:b7:e6:5b/00:02:0a:00:00/e0 tag 0 dma 356352 out [ 1843.981238] res 51/84:38:37:e8:5b/84:01:0a:00:00/e0 Emask 0x30 (host bus error) [ 1843.981241] ata3.00: status: { DRDY ERR } [ 1843.981243] ata3.00: error: { ICRC ABRT } [ 1843.981252] ata3: soft resetting link [ 1844.185022] ata3.00: configured for UDMA/33 [ 1844.185039] ata3: EH complete [ 1844.189413] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1844.189417] ata3.00: BMDMA stat 0x26 [ 1844.189421] ata3.00: failed command: WRITE DMA EXT [ 1844.189427] ata3.00: cmd 35/00:b8:b7:e6:5b/00:02:0a:00:00/e0 tag 0 dma 356352 out [ 1844.189428] res 51/84:c8:a7:e8:5b/84:00:0a:00:00/e0 Emask 0x30 (host bus error) [ 1844.189432] ata3.00: status: { DRDY ERR } [ 1844.189434] ata3.00: error: { ICRC ABRT } [ 1844.189443] ata3: soft resetting link [ 1844.385196] ata3.00: configured for UDMA/33 [ 1844.385215] ata3: EH complete [ 1878.963396] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1878.963401] ata3.00: BMDMA stat 0x26 [ 1878.963405] ata3.00: failed command: WRITE DMA EXT [ 1878.963411] ata3.00: cmd 35/00:00:b7:56:5c/00:04:0a:00:00/e0 tag 0 dma 524288 out [ 1878.963412] res 51/84:10:a7:5a:5c/84:00:0a:00:00/e0 Emask 0x30 (host bus error) [ 1878.963415] ata3.00: status: { DRDY ERR } [ 1878.963417] ata3.00: error: { ICRC ABRT } [ 1878.963427] ata3: soft resetting link [ 1879.156667] ata3.00: configured for UDMA/33 [ 1879.156700] ata3: EH complete [ 1884.006551] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1884.006556] ata3.00: BMDMA stat 0x26 [ 1884.006560] ata3.00: failed command: WRITE DMA EXT [ 1884.006566] ata3.00: cmd 35/00:00:ff:9b:5c/00:04:0a:00:00/e0 tag 0 dma 524288 out [ 1884.006567] res 51/84:85:7a:9f:5c/84:00:0a:00:00/e0 Emask 0x30 (host bus error) [ 1884.006570] ata3.00: status: { DRDY ERR } [ 1884.006572] ata3.00: error: { ICRC ABRT } [ 1884.006583] ata3: soft resetting link [ 1884.200059] ata3.00: configured for UDMA/33 [ 1884.200079] ata3: EH complete [ 1908.892302] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1908.892308] ata3.00: BMDMA stat 0x26 [ 1908.892312] ata3.00: failed command: WRITE DMA EXT [ 1908.892318] ata3.00: cmd 35/00:00:6f:a8:5d/00:04:0a:00:00/e0 tag 0 dma 524288 out [ 1908.892320] res 51/84:b5:ba:ab:5d/84:00:0a:00:00/e0 Emask 0x30 (host bus error) [ 1908.892323] ata3.00: status: { DRDY ERR } [ 1908.892325] ata3.00: error: { ICRC ABRT } [ 1908.892336] ata3: soft resetting link [ 1909.084878] ata3.00: configured for UDMA/33 [ 1909.084893] ata3: EH complete [ 1923.934553] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1923.934558] ata3.00: BMDMA stat 0x26 [ 1923.934562] ata3.00: failed command: WRITE DMA EXT [ 1923.934568] ata3.00: cmd 35/00:00:8f:d8:67/00:04:0a:00:00/e0 tag 0 dma 524288 out [ 1923.934569] res 51/84:51:3e:d9:67/84:03:0a:00:00/e0 Emask 0x30 (host bus error) [ 1923.934573] ata3.00: status: { DRDY ERR } [ 1923.934575] ata3.00: error: { ICRC ABRT } [ 1923.934585] ata3: soft resetting link [ 1924.141116] ata3.00: configured for UDMA/33 [ 1924.141135] ata3: EH complete [ 1945.729227] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1945.729232] ata3.00: BMDMA stat 0x26 [ 1945.729236] ata3.00: failed command: WRITE DMA EXT [ 1945.729242] ata3.00: cmd 35/00:00:77:e2:f0/00:02:08:00:00/e0 tag 0 dma 262144 out [ 1945.729243] res 51/84:2d:4a:e4:f0/84:00:08:00:00/e0 Emask 0x30 (host bus error) [ 1945.729246] ata3.00: status: { DRDY ERR } [ 1945.729248] ata3.00: error: { ICRC ABRT } [ 1945.729258] ata3: soft resetting link [ 1946.037287] ata3.00: configured for UDMA/33 [ 1946.037306] ata3: EH complete [ 1946.041681] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1946.041686] ata3.00: BMDMA stat 0x26 [ 1946.041690] ata3.00: failed command: WRITE DMA EXT [ 1946.041696] ata3.00: cmd 35/00:00:77:e2:f0/00:02:08:00:00/e0 tag 0 dma 262144 out [ 1946.041697] res 51/84:b0:c7:e3:f0/84:00:08:00:00/e0 Emask 0x30 (host bus error) [ 1946.041700] ata3.00: status: { DRDY ERR } [ 1946.041702] ata3.00: error: { ICRC ABRT } [ 1946.041712] ata3: soft resetting link [ 1946.244501] ata3.00: configured for UDMA/33 [ 1946.244522] ata3: EH complete [ 1947.954451] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1947.954456] ata3.00: BMDMA stat 0x26 [ 1947.954460] ata3.00: failed command: WRITE DMA EXT [ 1947.954466] ata3.00: cmd 35/00:e8:a7:10:30/00:03:00:00:00/e0 tag 0 dma 512000 out [ 1947.954467] res 51/84:36:59:14:30/84:00:00:00:00/e0 Emask 0x30 (host bus error) [ 1947.954471] ata3.00: status: { DRDY ERR } [ 1947.954473] ata3.00: error: { ICRC ABRT } [ 1947.954483] ata3: soft resetting link [ 1948.145125] ata3.00: configured for UDMA/33 [ 1948.145143] ata3: EH complete [ 1951.425341] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1951.425346] ata3.00: BMDMA stat 0x26 [ 1951.425350] ata3.00: failed command: WRITE DMA EXT [ 1951.425356] ata3.00: cmd 35/00:00:cf:1d:d0/00:04:01:00:00/e0 tag 0 dma 524288 out [ 1951.425357] res 51/84:20:af:1e:d0/84:03:01:00:00/e0 Emask 0x30 (host bus error) [ 1951.425360] ata3.00: status: { DRDY ERR } [ 1951.425363] ata3.00: error: { ICRC ABRT } [ 1951.425373] ata3: soft resetting link [ 1951.621236] ata3.00: configured for UDMA/33 [ 1951.621260] ata3: EH complete [ 1951.627901] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1951.627906] ata3.00: BMDMA stat 0x26 [ 1951.627910] ata3.00: failed command: WRITE DMA EXT [ 1951.627916] ata3.00: cmd 35/00:00:cf:1d:d0/00:04:01:00:00/e0 tag 0 dma 524288 out [ 1951.627917] res 51/84:90:3f:1e:d0/84:03:01:00:00/e0 Emask 0x30 (host bus error) [ 1951.627920] ata3.00: status: { DRDY ERR } [ 1951.627922] ata3.00: error: { ICRC ABRT } [ 1951.627933] ata3: soft resetting link [ 1951.820412] ata3.00: configured for UDMA/33 [ 1951.820430] ata3: EH complete [ 1953.502520] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1953.502526] ata3.00: BMDMA stat 0x26 [ 1953.502530] ata3.00: failed command: WRITE DMA [ 1953.502536] ata3.00: cmd ca/00:10:bf:c0:59/00:00:00:00:00/e2 tag 0 dma 8192 out [ 1953.502537] res 51/84:01:ce:c0:59/84:03:01:00:00/e2 Emask 0x30 (host bus error) [ 1953.502540] ata3.00: status: { DRDY ERR } [ 1953.502543] ata3.00: error: { ICRC ABRT } [ 1953.502553] ata3: soft resetting link [ 1953.810088] ata3.00: configured for UDMA/33 [ 1953.810103] ata3: EH complete [ 1960.588034] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1960.588039] ata3.00: BMDMA stat 0x26 [ 1960.588043] ata3.00: failed command: WRITE DMA EXT [ 1960.588049] ata3.00: cmd 35/00:00:a7:33:f1/00:04:08:00:00/e0 tag 0 dma 524288 out [ 1960.588050] res 51/84:72:35:37:f1/84:00:08:00:00/e0 Emask 0x30 (host bus error) [ 1960.588053] ata3.00: status: { DRDY ERR } [ 1960.588056] ata3.00: error: { ICRC ABRT } [ 1960.588065] ata3: soft resetting link [ 1960.841248] ata3.00: configured for UDMA/33 [ 1960.841261] ata3: EH complete [ 1961.416695] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1961.416700] ata3.00: BMDMA stat 0x26 [ 1961.416705] ata3.00: failed command: WRITE DMA EXT [ 1961.416711] ata3.00: cmd 35/00:b0:1f:20:00/00:03:02:00:00/e0 tag 0 dma 483328 out [ 1961.416712] res 51/84:78:57:23:00/84:00:02:00:00/e0 Emask 0x30 (host bus error) [ 1961.416715] ata3.00: status: { DRDY ERR } [ 1961.416717] ata3.00: error: { ICRC ABRT } [ 1961.416729] ata3: soft resetting link [ 1961.616956] ata3.00: configured for UDMA/33 [ 1961.616975] ata3: EH complete [ 1961.632428] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1961.632433] ata3.00: BMDMA stat 0x26 [ 1961.632437] ata3.00: failed command: WRITE DMA EXT [ 1961.632443] ata3.00: cmd 35/00:b0:1f:20:00/00:03:02:00:00/e0 tag 0 dma 483328 out [ 1961.632444] res 51/84:53:7c:23:00/84:00:02:00:00/e0 Emask 0x30 (host bus error) [ 1961.632447] ata3.00: status: { DRDY ERR } [ 1961.632450] ata3.00: error: { ICRC ABRT } [ 1961.632460] ata3: soft resetting link [ 1961.833162] ata3.00: configured for UDMA/33 [ 1961.833180] ata3: EH complete [ 1962.693695] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1962.693700] ata3.00: BMDMA stat 0x26 [ 1962.693704] ata3.00: failed command: WRITE DMA EXT [ 1962.693710] ata3.00: cmd 35/00:30:f7:41:f1/00:02:08:00:00/e0 tag 0 dma 286720 out [ 1962.693712] res 51/84:10:17:43:f1/84:01:08:00:00/e0 Emask 0x30 (host bus error) [ 1962.693715] ata3.00: status: { DRDY ERR } [ 1962.693717] ata3.00: error: { ICRC ABRT } [ 1962.693727] ata3: soft resetting link [ 1962.893088] ata3.00: configured for UDMA/33 [ 1962.893107] ata3: EH complete [ 1963.579053] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1963.579058] ata3.00: BMDMA stat 0x26 [ 1963.579062] ata3.00: failed command: WRITE DMA EXT [ 1963.579068] ata3.00: cmd 35/00:00:d7:45:f1/00:04:08:00:00/e0 tag 0 dma 524288 out [ 1963.579069] res 51/84:7b:5c:49:f1/84:00:08:00:00/e0 Emask 0x30 (host bus error) [ 1963.579072] ata3.00: status: { DRDY ERR } [ 1963.579075] ata3.00: error: { ICRC ABRT } [ 1963.579085] ata3: soft resetting link [ 1963.824855] ata3.00: configured for UDMA/33 [ 1963.824872] ata3: EH complete [ 1964.541279] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1964.541283] ata3.00: BMDMA stat 0x26 [ 1964.541287] ata3.00: failed command: WRITE DMA EXT [ 1964.541293] ata3.00: cmd 35/00:d0:e7:0b:df/00:01:01:00:00/e0 tag 0 dma 237568 out [ 1964.541295] res 51/84:a0:17:0c:df/84:01:01:00:00/e0 Emask 0x30 (host bus error) [ 1964.541298] ata3.00: status: { DRDY ERR } [ 1964.541300] ata3.00: error: { ICRC ABRT } [ 1964.541309] ata3: soft resetting link [ 1964.732665] ata3.00: configured for UDMA/33 [ 1964.732681] ata3: EH complete [ 1972.631533] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1972.631538] ata3.00: BMDMA stat 0x26 [ 1972.631542] ata3.00: failed command: WRITE DMA EXT [ 1972.631548] ata3.00: cmd 35/00:c0:47:85:f1/00:03:08:00:00/e0 tag 0 dma 491520 out [ 1972.631549] res 51/84:c1:46:87:f1/84:01:08:00:00/e0 Emask 0x30 (host bus error) [ 1972.631553] ata3.00: status: { DRDY ERR } [ 1972.631555] ata3.00: error: { ICRC ABRT } [ 1972.631565] ata3: soft resetting link [ 1972.880804] ata3.00: configured for UDMA/33 [ 1972.880819] ata3: EH complete [ 1978.590713] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1978.590720] ata3.00: BMDMA stat 0x26 [ 1978.590726] ata3.00: failed command: WRITE DMA [ 1978.590733] ata3.00: cmd ca/00:18:3f:00:08/00:00:00:00:00/e3 tag 0 dma 12288 out [ 1978.590734] res 51/84:01:56:00:08/84:01:08:00:00/e3 Emask 0x30 (host bus error) [ 1978.590737] ata3.00: status: { DRDY ERR } [ 1978.590739] ata3.00: error: { ICRC ABRT } [ 1978.590753] ata3: soft resetting link [ 1978.841031] ata3.00: configured for UDMA/33 [ 1978.841050] ata3: EH complete [ 1979.347363] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1979.347374] ata3.00: BMDMA stat 0x26 [ 1979.347381] ata3.00: failed command: WRITE DMA [ 1979.347388] ata3.00: cmd ca/00:b8:87:bd:f1/00:00:00:00:00/e8 tag 0 dma 94208 out [ 1979.347389] res 51/84:88:b7:bd:f1/84:01:08:00:00/e8 Emask 0x30 (host bus error) [ 1979.347393] ata3.00: status: { DRDY ERR } [ 1979.347395] ata3.00: error: { ICRC ABRT } [ 1979.347411] ata3: soft resetting link [ 1979.597701] ata3.00: configured for UDMA/33 [ 1979.597720] ata3: EH complete [ 1981.434168] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1981.434173] ata3.00: BMDMA stat 0x26 [ 1981.434176] ata3.00: failed command: WRITE DMA EXT [ 1981.434182] ata3.00: cmd 35/00:00:3f:2f:a5/00:04:0a:00:00/e0 tag 0 dma 524288 out [ 1981.434184] res 51/84:e7:58:31:a5/84:01:0a:00:00/e0 Emask 0x30 (host bus error) [ 1981.434187] ata3.00: status: { DRDY ERR } [ 1981.434189] ata3.00: error: { ICRC ABRT } [ 1981.434199] ata3: soft resetting link [ 1981.624467] ata3.00: configured for UDMA/33 [ 1981.624483] ata3: EH complete [ 1981.857961] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1981.857966] ata3.00: BMDMA stat 0x26 [ 1981.857969] ata3.00: failed command: WRITE DMA EXT [ 1981.857976] ata3.00: cmd 35/00:68:37:96:a5/00:01:0a:00:00/e0 tag 0 dma 184320 out [ 1981.857977] res 51/84:38:67:96:a5/84:01:0a:00:00/e0 Emask 0x30 (host bus error) [ 1981.857980] ata3.00: status: { DRDY ERR } [ 1981.857982] ata3.00: error: { ICRC ABRT } [ 1981.857993] ata3: soft resetting link [ 1982.112896] ata3.00: configured for UDMA/33 [ 1982.112912] ata3: EH complete [ 1982.884063] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1982.884069] ata3.00: BMDMA stat 0x26 [ 1982.884073] ata3.00: failed command: WRITE DMA EXT [ 1982.884079] ata3.00: cmd 35/00:c0:a7:cd:f1/00:01:08:00:00/e0 tag 0 dma 229376 out [ 1982.884080] res 51/84:00:67:ce:f1/84:01:08:00:00/e0 Emask 0x30 (host bus error) [ 1982.884084] ata3.00: status: { DRDY ERR } [ 1982.884086] ata3.00: error: { ICRC ABRT } [ 1982.884096] ata3: soft resetting link [ 1983.152823] ata3.00: configured for UDMA/33 [ 1983.152845] ata3: EH complete [ 1983.293774] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1983.293779] ata3.00: BMDMA stat 0x26 [ 1983.293783] ata3.00: failed command: WRITE DMA EXT [ 1983.293789] ata3.00: cmd 35/00:f0:ff:b9:ed/00:03:0a:00:00/e0 tag 0 dma 516096 out [ 1983.293790] res 51/84:92:5d:bd:ed/84:00:0a:00:00/e0 Emask 0x30 (host bus error) [ 1983.293793] ata3.00: status: { DRDY ERR } [ 1983.293795] ata3.00: error: { ICRC ABRT } [ 1983.293805] ata3: soft resetting link [ 1983.557178] ata3.00: configured for UDMA/33 [ 1983.557196] ata3: EH complete [ 1989.278985] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1989.278990] ata3.00: BMDMA stat 0x26 [ 1989.278994] ata3.00: failed command: WRITE DMA EXT [ 1989.279000] ata3.00: cmd 35/00:00:ef:f9:e8/00:04:01:00:00/e0 tag 0 dma 524288 out [ 1989.279001] res 51/84:80:6f:fa:e8/84:03:01:00:00/e0 Emask 0x30 (host bus error) [ 1989.279004] ata3.00: status: { DRDY ERR } [ 1989.279007] ata3.00: error: { ICRC ABRT } [ 1989.279016] ata3: soft resetting link [ 1989.472391] ata3.00: configured for UDMA/33 [ 1989.472405] ata3: EH complete [ 1992.290073] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1992.290081] ata3.00: BMDMA stat 0x26 [ 1992.290086] ata3.00: failed command: WRITE DMA EXT [ 1992.290093] ata3.00: cmd 35/00:98:4f:10:04/00:01:0e:00:00/e0 tag 0 dma 208896 out [ 1992.290094] res 51/84:48:9f:11:04/84:00:0e:00:00/e0 Emask 0x30 (host bus error) [ 1992.290109] ata3.00: status: { DRDY ERR } [ 1992.290111] ata3.00: error: { ICRC ABRT } [ 1992.290125] ata3: soft resetting link [ 1992.601100] ata3.00: configured for UDMA/33 [ 1992.601129] ata3: EH complete [ 1995.315244] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1995.315249] ata3.00: BMDMA stat 0x26 [ 1995.315253] ata3.00: failed command: WRITE DMA EXT [ 1995.315259] ata3.00: cmd 35/00:00:b7:8d:5d/00:04:0d:00:00/e0 tag 0 dma 524288 out [ 1995.315260] res 51/84:21:96:91:5d/84:00:0d:00:00/e0 Emask 0x30 (host bus error) [ 1995.315263] ata3.00: status: { DRDY ERR } [ 1995.315265] ata3.00: error: { ICRC ABRT } [ 1995.315275] ata3: soft resetting link [ 1995.504633] ata3.00: configured for UDMA/33 [ 1995.504648] ata3: EH complete [ 1995.720436] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1995.720443] ata3.00: BMDMA stat 0x26 [ 1995.720448] ata3.00: failed command: WRITE DMA EXT [ 1995.720455] ata3.00: cmd 35/00:00:f7:b9:5d/00:04:0d:00:00/e0 tag 0 dma 524288 out [ 1995.720456] res 51/84:8d:6a:bd:5d/84:00:0d:00:00/e0 Emask 0x30 (host bus error) [ 1995.720460] ata3.00: status: { DRDY ERR } [ 1995.720462] ata3.00: error: { ICRC ABRT } [ 1995.720476] ata3: soft resetting link [ 1995.921031] ata3.00: configured for UDMA/33 [ 1995.921053] ata3: EH complete [ 1996.146717] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1996.146722] ata3.00: BMDMA stat 0x26 [ 1996.146726] ata3.00: failed command: WRITE DMA EXT [ 1996.146732] ata3.00: cmd 35/00:00:2f:20:60/00:04:0d:00:00/e0 tag 0 dma 524288 out [ 1996.146733] res 51/84:5f:d0:21:60/84:02:0d:00:00/e0 Emask 0x30 (host bus error) [ 1996.146737] ata3.00: status: { DRDY ERR } [ 1996.146739] ata3.00: error: { ICRC ABRT } [ 1996.146749] ata3: soft resetting link [ 1996.344400] ata3.00: configured for UDMA/33 [ 1996.344419] ata3: EH complete [ 1996.828326] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1996.828331] ata3.00: BMDMA stat 0x26 [ 1996.828335] ata3.00: failed command: WRITE DMA EXT [ 1996.828341] ata3.00: cmd 35/00:00:a7:e5:f1/00:04:08:00:00/e0 tag 0 dma 524288 out [ 1996.828343] res 51/84:b0:f7:e5:f1/84:03:08:00:00/e0 Emask 0x30 (host bus error) [ 1996.828346] ata3.00: status: { DRDY ERR } [ 1996.828348] ata3.00: error: { ICRC ABRT } [ 1996.828358] ata3: soft resetting link [ 1997.020960] ata3.00: configured for UDMA/33 [ 1997.020976] ata3: EH complete [ 1997.351813] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1997.351821] ata3.00: BMDMA stat 0x26 [ 1997.351825] ata3.00: failed command: WRITE DMA EXT [ 1997.351831] ata3.00: cmd 35/00:80:37:0d:f2/00:02:08:00:00/e0 tag 0 dma 327680 out [ 1997.351832] res 51/84:f0:c7:0d:f2/84:01:08:00:00/e0 Emask 0x30 (host bus error) [ 1997.351836] ata3.00: status: { DRDY ERR } [ 1997.351838] ata3.00: error: { ICRC ABRT } [ 1997.351848] ata3: soft resetting link [ 1997.544417] ata3.00: configured for UDMA/33 [ 1997.544431] ata3: EH complete [ 1997.675624] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1997.675629] ata3.00: BMDMA stat 0x26 [ 1997.675633] ata3.00: failed command: WRITE DMA EXT [ 1997.675639] ata3.00: cmd 35/00:00:e7:41:60/00:04:0d:00:00/e0 tag 0 dma 524288 out [ 1997.675641] res 51/84:76:71:43:60/84:02:0d:00:00/e0 Emask 0x30 (host bus error) [ 1997.675644] ata3.00: status: { DRDY ERR } [ 1997.675646] ata3.00: error: { ICRC ABRT } [ 1997.675656] ata3: soft resetting link [ 1997.920748] ata3.00: configured for UDMA/33 [ 1997.920760] ata3: EH complete [ 1997.956290] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1997.956294] ata3.00: BMDMA stat 0x26 [ 1997.956298] ata3.00: failed command: WRITE DMA EXT [ 1997.956304] ata3.00: cmd 35/00:00:e7:41:60/00:04:0d:00:00/e0 tag 0 dma 524288 out [ 1997.956306] res 51/84:3e:a9:45:60/84:00:0d:00:00/e0 Emask 0x30 (host bus error) [ 1997.956309] ata3.00: status: { DRDY ERR } [ 1997.956311] ata3.00: error: { ICRC ABRT } [ 1997.956321] ata3: soft resetting link [ 1998.160997] ata3.00: configured for UDMA/33 [ 1998.161014] ata3: EH complete [ 1998.332540] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1998.332544] ata3.00: BMDMA stat 0x26 [ 1998.332548] ata3.00: failed command: WRITE DMA EXT [ 1998.332554] ata3.00: cmd 35/00:00:e7:49:60/00:04:0d:00:00/e0 tag 0 dma 524288 out [ 1998.332555] res 51/84:be:29:4d:60/84:00:0d:00:00/e0 Emask 0x30 (host bus error) [ 1998.332559] ata3.00: status: { DRDY ERR } [ 1998.332561] ata3.00: error: { ICRC ABRT } [ 1998.332570] ata3: soft resetting link [ 1998.589370] ata3.00: configured for UDMA/33 [ 1998.589385] ata3: EH complete [ 1998.633897] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1998.633902] ata3.00: BMDMA stat 0x26 [ 1998.633906] ata3.00: failed command: WRITE DMA EXT [ 1998.633912] ata3.00: cmd 35/00:00:e7:4d:60/00:04:0d:00:00/e0 tag 0 dma 524288 out [ 1998.633914] res 51/84:8d:5a:51:60/84:00:0d:00:00/e0 Emask 0x30 (host bus error) [ 1998.633917] ata3.00: status: { DRDY ERR } [ 1998.633919] ata3.00: error: { ICRC ABRT } [ 1998.633929] ata3: soft resetting link [ 1998.828547] ata3.00: configured for UDMA/33 [ 1998.828565] ata3: EH complete [ 1998.861091] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1998.861096] ata3.00: BMDMA stat 0x26 [ 1998.861100] ata3.00: failed command: WRITE DMA EXT [ 1998.861106] ata3.00: cmd 35/00:10:e7:51:60/00:02:0d:00:00/e0 tag 0 dma 270336 out [ 1998.861107] res 51/84:66:91:52:60/84:01:0d:00:00/e0 Emask 0x30 (host bus error) [ 1998.861111] ata3.00: status: { DRDY ERR } [ 1998.861113] ata3.00: error: { ICRC ABRT } [ 1998.861122] ata3: soft resetting link [ 1999.060773] ata3.00: configured for UDMA/33 [ 1999.060791] ata3: EH complete [ 1999.223535] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1999.223540] ata3.00: BMDMA stat 0x26 [ 1999.223544] ata3.00: failed command: WRITE DMA [ 1999.223550] ata3.00: cmd ca/00:e8:57:27:64/00:00:00:00:00/ed tag 0 dma 118784 out [ 1999.223551] res 51/84:08:37:28:64/84:01:0d:00:00/ed Emask 0x30 (host bus error) [ 1999.223554] ata3.00: status: { DRDY ERR } [ 1999.223557] ata3.00: error: { ICRC ABRT } [ 1999.223567] ata3: soft resetting link [ 1999.413054] ata3.00: configured for UDMA/33 [ 1999.413072] ata3: EH complete [ 1999.446645] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1999.446650] ata3.00: BMDMA stat 0x26 [ 1999.446654] ata3.00: failed command: WRITE DMA EXT [ 1999.446660] ata3.00: cmd 35/00:00:47:2c:64/00:04:0d:00:00/e0 tag 0 dma 524288 out [ 1999.446662] res 51/84:d4:73:2d:64/84:02:0d:00:00/e0 Emask 0x30 (host bus error) [ 1999.446665] ata3.00: status: { DRDY ERR } [ 1999.446667] ata3.00: error: { ICRC ABRT } [ 1999.446677] ata3: soft resetting link [ 1999.637248] ata3.00: configured for UDMA/33 [ 1999.637266] ata3: EH complete [ 1999.859895] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 1999.859901] ata3.00: BMDMA stat 0x26 [ 1999.859904] ata3.00: failed command: WRITE DMA EXT [ 1999.859910] ata3.00: cmd 35/00:00:c7:38:68/00:04:0d:00:00/e0 tag 0 dma 524288 out [ 1999.859912] res 51/84:50:77:39:68/84:03:0d:00:00/e0 Emask 0x30 (host bus error) [ 1999.859915] ata3.00: status: { DRDY ERR } [ 1999.859917] ata3.00: error: { ICRC ABRT } [ 1999.859927] ata3: soft resetting link [ 2000.052600] ata3.00: configured for UDMA/33 [ 2000.052614] ata3: EH complete [ 2000.160191] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2000.160196] ata3.00: BMDMA stat 0x26 [ 2000.160200] ata3.00: failed command: WRITE DMA EXT [ 2000.160206] ata3.00: cmd 35/00:a8:a7:58:68/00:03:0d:00:00/e0 tag 0 dma 479232 out [ 2000.160207] res 51/84:a8:a7:5a:68/84:01:0d:00:00/e0 Emask 0x30 (host bus error) [ 2000.160210] ata3.00: status: { DRDY ERR } [ 2000.160213] ata3.00: error: { ICRC ABRT } [ 2000.160222] ata3: soft resetting link [ 2000.360929] ata3.00: configured for UDMA/33 [ 2000.360946] ata3: EH complete [ 2000.620678] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2000.620683] ata3.00: BMDMA stat 0x26 [ 2000.620687] ata3.00: failed command: WRITE DMA EXT [ 2000.620692] ata3.00: cmd 35/00:00:27:1d:6c/00:04:0d:00:00/e0 tag 0 dma 524288 out [ 2000.620694] res 51/84:86:a1:20:6c/84:00:0d:00:00/e0 Emask 0x30 (host bus error) [ 2000.620697] ata3.00: status: { DRDY ERR } [ 2000.620699] ata3.00: error: { ICRC ABRT } [ 2000.620710] ata3: soft resetting link [ 2000.813288] ata3.00: configured for UDMA/33 [ 2000.813304] ata3: EH complete [ 2000.898030] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2000.898035] ata3.00: BMDMA stat 0x26 [ 2000.898039] ata3.00: failed command: WRITE DMA EXT [ 2000.898045] ata3.00: cmd 35/00:e0:9f:36:6c/00:03:0d:00:00/e0 tag 0 dma 507904 out [ 2000.898046] res 51/84:f0:8f:38:6c/84:01:0d:00:00/e0 Emask 0x30 (host bus error) [ 2000.898050] ata3.00: status: { DRDY ERR } [ 2000.898052] ata3.00: error: { ICRC ABRT } [ 2000.898062] ata3: soft resetting link [ 2001.096536] ata3.00: configured for UDMA/33 [ 2001.096554] ata3: EH complete [ 2002.225889] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2002.225894] ata3.00: BMDMA stat 0x26 [ 2002.225898] ata3.00: failed command: WRITE DMA EXT [ 2002.225904] ata3.00: cmd 35/00:00:3f:1d:f2/00:04:08:00:00/e0 tag 0 dma 524288 out [ 2002.225905] res 51/84:fb:44:1f:f2/84:01:08:00:00/e0 Emask 0x30 (host bus error) [ 2002.225908] ata3.00: status: { DRDY ERR } [ 2002.225911] ata3.00: error: { ICRC ABRT } [ 2002.225921] ata3: soft resetting link [ 2002.529805] ata3.00: configured for UDMA/33 [ 2002.529822] ata3: EH complete [ 2002.830888] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2002.830893] ata3.00: BMDMA stat 0x26 [ 2002.830897] ata3.00: failed command: WRITE DMA EXT [ 2002.830903] ata3.00: cmd 35/00:00:c7:04:5c/00:04:0d:00:00/e0 tag 0 dma 524288 out [ 2002.830904] res 51/84:46:81:05:5c/84:03:0d:00:00/e0 Emask 0x30 (host bus error) [ 2002.830907] ata3.00: status: { DRDY ERR } [ 2002.830910] ata3.00: error: { ICRC ABRT } [ 2002.830920] ata3: soft resetting link [ 2003.021224] ata3.00: configured for UDMA/33 [ 2003.021242] ata3: EH complete [ 2003.586053] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2003.586057] ata3.00: BMDMA stat 0x26 [ 2003.586061] ata3.00: failed command: WRITE DMA EXT [ 2003.586067] ata3.00: cmd 35/00:00:57:04:60/00:04:0d:00:00/e0 tag 0 dma 524288 out [ 2003.586069] res 51/84:ae:a9:04:60/84:03:0d:00:00/e0 Emask 0x30 (host bus error) [ 2003.586072] ata3.00: status: { DRDY ERR } [ 2003.586074] ata3.00: error: { ICRC ABRT } [ 2003.586084] ata3: soft resetting link [ 2003.844952] ata3.00: configured for UDMA/33 [ 2003.844968] ata3: EH complete [ 2004.023083] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2004.023088] ata3.00: BMDMA stat 0x26 [ 2004.023092] ata3.00: failed command: WRITE DMA EXT [ 2004.023098] ata3.00: cmd 35/00:78:3f:00:64/00:03:0d:00:00/e0 tag 0 dma 454656 out [ 2004.023099] res 51/84:29:8e:02:64/84:01:0d:00:00/e0 Emask 0x30 (host bus error) [ 2004.023102] ata3.00: status: { DRDY ERR } [ 2004.023105] ata3.00: error: { ICRC ABRT } [ 2004.023114] ata3: soft resetting link [ 2004.229303] ata3.00: configured for UDMA/33 [ 2004.229321] ata3: EH complete [ 2005.622874] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2005.622879] ata3.00: BMDMA stat 0x26 [ 2005.622883] ata3.00: failed command: WRITE DMA [ 2005.622888] ata3.00: cmd ca/00:10:3f:00:a4/00:00:00:00:00/ef tag 0 dma 8192 out [ 2005.622890] res 51/84:01:4e:00:a4/84:01:0d:00:00/ef Emask 0x30 (host bus error) [ 2005.622893] ata3.00: status: { DRDY ERR } [ 2005.622895] ata3.00: error: { ICRC ABRT } [ 2005.622905] ata3: soft resetting link [ 2005.928766] ata3.00: configured for UDMA/33 [ 2005.928778] ata3: EH complete [ 2006.823260] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2006.823266] ata3.00: BMDMA stat 0x26 [ 2006.823269] ata3.00: failed command: WRITE DMA EXT [ 2006.823275] ata3.00: cmd 35/00:00:5f:a5:f2/00:04:08:00:00/e0 tag 0 dma 524288 out [ 2006.823277] res 51/84:b4:ab:a6:f2/84:02:08:00:00/e0 Emask 0x30 (host bus error) [ 2006.823280] ata3.00: status: { DRDY ERR } [ 2006.823282] ata3.00: error: { ICRC ABRT } [ 2006.823292] ata3: soft resetting link [ 2007.028746] ata3.00: configured for UDMA/33 [ 2007.028762] ata3: EH complete [ 2007.086245] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2007.086250] ata3.00: BMDMA stat 0x26 [ 2007.086254] ata3.00: failed command: WRITE DMA EXT [ 2007.086260] ata3.00: cmd 35/00:00:4f:59:f2/00:04:08:00:00/e0 tag 0 dma 524288 out [ 2007.086261] res 51/84:0b:44:5c:f2/84:01:08:00:00/e0 Emask 0x30 (host bus error) [ 2007.086264] ata3.00: status: { DRDY ERR } [ 2007.086266] ata3.00: error: { ICRC ABRT } [ 2007.086276] ata3: soft resetting link [ 2007.276949] ata3.00: configured for UDMA/33 [ 2007.276967] ata3: EH complete [ 2007.283739] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2007.283744] ata3.00: BMDMA stat 0x26 [ 2007.283748] ata3.00: failed command: WRITE DMA EXT [ 2007.283754] ata3.00: cmd 35/00:00:4f:59:f2/00:04:08:00:00/e0 tag 0 dma 524288 out [ 2007.283755] res 51/84:e1:6e:59:f2/84:03:08:00:00/e0 Emask 0x30 (host bus error) [ 2007.283759] ata3.00: status: { DRDY ERR } [ 2007.283761] ata3.00: error: { ICRC ABRT } [ 2007.283770] ata3: soft resetting link [ 2007.485169] ata3.00: configured for UDMA/33 [ 2007.485186] ata3: EH complete [ 2008.551794] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2008.551799] ata3.00: BMDMA stat 0x26 [ 2008.551803] ata3.00: failed command: WRITE DMA EXT [ 2008.551809] ata3.00: cmd 35/00:00:9f:c7:f2/00:04:08:00:00/e0 tag 0 dma 524288 out [ 2008.551811] res 51/84:04:9b:c8:f2/84:03:08:00:00/e0 Emask 0x30 (host bus error) [ 2008.551814] ata3.00: status: { DRDY ERR } [ 2008.551816] ata3.00: error: { ICRC ABRT } [ 2008.551827] ata3: soft resetting link [ 2008.753264] ata3.00: configured for UDMA/33 [ 2008.753283] ata3: EH complete [ 2008.802834] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2008.802839] ata3.00: BMDMA stat 0x26 [ 2008.802843] ata3.00: failed command: WRITE DMA EXT [ 2008.802849] ata3.00: cmd 35/00:00:6f:d5:f2/00:04:08:00:00/e0 tag 0 dma 524288 out [ 2008.802850] res 51/84:a3:cc:d6:f2/84:02:08:00:00/e0 Emask 0x30 (host bus error) [ 2008.802853] ata3.00: status: { DRDY ERR } [ 2008.802856] ata3.00: error: { ICRC ABRT } [ 2008.802865] ata3: soft resetting link [ 2009.000466] ata3.00: configured for UDMA/33 [ 2009.000484] ata3: EH complete [ 2009.050058] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2009.050063] ata3.00: BMDMA stat 0x26 [ 2009.050067] ata3.00: failed command: WRITE DMA EXT [ 2009.050073] ata3.00: cmd 35/00:00:6f:e1:f2/00:04:08:00:00/e0 tag 0 dma 524288 out [ 2009.050074] res 51/84:70:ff:e2:f2/84:02:08:00:00/e0 Emask 0x30 (host bus error) [ 2009.050077] ata3.00: status: { DRDY ERR } [ 2009.050080] ata3.00: error: { ICRC ABRT } [ 2009.050090] ata3: soft resetting link [ 2009.244686] ata3.00: configured for UDMA/33 [ 2009.244711] ata3: EH complete [ 2009.291241] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2009.291248] ata3.00: BMDMA stat 0x26 [ 2009.291254] ata3.00: failed command: WRITE DMA EXT [ 2009.291260] ata3.00: cmd 35/00:00:6f:ed:f2/00:04:08:00:00/e0 tag 0 dma 524288 out [ 2009.291262] res 51/84:ae:c1:ef:f2/84:01:08:00:00/e0 Emask 0x30 (host bus error) [ 2009.291265] ata3.00: status: { DRDY ERR } [ 2009.291267] ata3.00: error: { ICRC ABRT } [ 2009.291280] ata3: soft resetting link [ 2009.485269] ata3.00: configured for UDMA/33 [ 2009.485288] ata3: EH complete [ 2013.736798] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2013.736806] ata3.00: BMDMA stat 0x26 [ 2013.736813] ata3.00: failed command: WRITE DMA EXT [ 2013.736819] ata3.00: cmd 35/00:00:c7:04:5c/00:04:0d:00:00/e0 tag 0 dma 524288 out [ 2013.736821] res 51/84:ae:19:08:5c/84:00:0d:00:00/e0 Emask 0x30 (host bus error) [ 2013.736824] ata3.00: status: { DRDY ERR } [ 2013.736826] ata3.00: error: { ICRC ABRT } [ 2013.736844] ata3: soft resetting link [ 2013.993863] ata3.00: configured for UDMA/33 [ 2013.993883] ata3: EH complete [ 2014.191232] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2014.191238] ata3.00: BMDMA stat 0x26 [ 2014.191242] ata3.00: failed command: WRITE DMA EXT [ 2014.191248] ata3.00: cmd 35/00:00:7f:25:f3/00:04:08:00:00/e0 tag 0 dma 524288 out [ 2014.191250] res 51/84:36:49:27:f3/84:02:08:00:00/e0 Emask 0x30 (host bus error) [ 2014.191253] ata3.00: status: { DRDY ERR } [ 2014.191255] ata3.00: error: { ICRC ABRT } [ 2014.191267] ata3: soft resetting link [ 2014.385161] ata3.00: configured for UDMA/33 [ 2014.385176] ata3: EH complete [ 2014.425736] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2014.425741] ata3.00: BMDMA stat 0x26 [ 2014.425745] ata3.00: failed command: WRITE DMA EXT [ 2014.425751] ata3.00: cmd 35/00:00:7f:2d:f3/00:04:08:00:00/e0 tag 0 dma 524288 out [ 2014.425752] res 51/84:df:a0:30:f3/84:00:08:00:00/e0 Emask 0x30 (host bus error) [ 2014.425756] ata3.00: status: { DRDY ERR } [ 2014.425758] ata3.00: error: { ICRC ABRT } [ 2014.425768] ata3: soft resetting link [ 2014.624398] ata3.00: configured for UDMA/33 [ 2014.624417] ata3: EH complete [ 2015.503074] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2015.503079] ata3.00: BMDMA stat 0x26 [ 2015.503083] ata3.00: failed command: WRITE DMA EXT [ 2015.503089] ata3.00: cmd 35/00:00:3f:04:68/00:04:0d:00:00/e0 tag 0 dma 524288 out [ 2015.503090] res 51/84:7f:c0:05:68/84:02:0d:00:00/e0 Emask 0x30 (host bus error) [ 2015.503094] ata3.00: status: { DRDY ERR } [ 2015.503096] ata3.00: error: { ICRC ABRT } [ 2015.503106] ata3: soft resetting link [ 2015.693346] ata3.00: configured for UDMA/33 [ 2015.693365] ata3: EH complete [ 2017.124728] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2017.124733] ata3.00: BMDMA stat 0x26 [ 2017.124737] ata3.00: failed command: WRITE DMA EXT [ 2017.124743] ata3.00: cmd 35/00:f8:9f:8d:f3/00:03:08:00:00/e0 tag 0 dma 520192 out [ 2017.124745] res 51/84:c8:cf:8d:f3/84:03:08:00:00/e0 Emask 0x30 (host bus error) [ 2017.124748] ata3.00: status: { DRDY ERR } [ 2017.124750] ata3.00: error: { ICRC ABRT } [ 2017.124762] ata3: soft resetting link [ 2017.432857] ata3.00: configured for UDMA/33 [ 2017.432885] ata3: EH complete [ 2017.504457] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2017.504463] ata3.00: BMDMA stat 0x26 [ 2017.504469] ata3.00: failed command: WRITE DMA EXT [ 2017.504475] ata3.00: cmd 35/00:e0:af:6f:f3/00:01:08:00:00/e0 tag 0 dma 245760 out [ 2017.504476] res 51/84:46:49:70:f3/84:01:08:00:00/e0 Emask 0x30 (host bus error) [ 2017.504480] ata3.00: status: { DRDY ERR } [ 2017.504482] ata3.00: error: { ICRC ABRT } [ 2017.504497] ata3: soft resetting link [ 2017.709108] ata3.00: configured for UDMA/33 [ 2017.709127] ata3: EH complete [ 2017.765672] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2017.765677] ata3.00: BMDMA stat 0x26 [ 2017.765681] ata3.00: failed command: WRITE DMA EXT [ 2017.765687] ata3.00: cmd 35/00:00:97:81:f3/00:04:08:00:00/e0 tag 0 dma 524288 out [ 2017.765688] res 51/84:a9:ee:81:f3/84:03:08:00:00/e0 Emask 0x30 (host bus error) [ 2017.765691] ata3.00: status: { DRDY ERR } [ 2017.765694] ata3.00: error: { ICRC ABRT } [ 2017.765703] ata3: soft resetting link [ 2017.961340] ata3.00: configured for UDMA/33 [ 2017.961359] ata3: EH complete [ 2017.988836] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2017.988841] ata3.00: BMDMA stat 0x26 [ 2017.988845] ata3.00: failed command: WRITE DMA EXT [ 2017.988851] ata3.00: cmd 35/00:00:97:81:f3/00:04:08:00:00/e0 tag 0 dma 524288 out [ 2017.988852] res 51/84:72:25:85:f3/84:00:08:00:00/e0 Emask 0x30 (host bus error) [ 2017.988855] ata3.00: status: { DRDY ERR } [ 2017.988857] ata3.00: error: { ICRC ABRT } [ 2017.988867] ata3: soft resetting link [ 2018.188532] ata3.00: configured for UDMA/33 [ 2018.188561] ata3: EH complete [ 2018.222074] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2018.222080] ata3.00: BMDMA stat 0x26 [ 2018.222085] ata3.00: failed command: WRITE DMA EXT [ 2018.222091] ata3.00: cmd 35/00:00:97:85:f3/00:04:08:00:00/e0 tag 0 dma 524288 out [ 2018.222092] res 51/84:52:45:89:f3/84:00:08:00:00/e0 Emask 0x30 (host bus error) [ 2018.222096] ata3.00: status: { DRDY ERR } [ 2018.222098] ata3.00: error: { ICRC ABRT } [ 2018.222110] ata3: soft resetting link [ 2018.416719] ata3.00: configured for UDMA/33 [ 2018.416738] ata3: EH complete [ 2019.951245] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2019.951250] ata3.00: BMDMA stat 0x26 [ 2019.951254] ata3.00: failed command: WRITE DMA EXT [ 2019.951260] ata3.00: cmd 35/00:00:47:c8:5a/00:04:0d:00:00/e0 tag 0 dma 524288 out [ 2019.951261] res 51/84:30:17:cb:5a/84:01:0d:00:00/e0 Emask 0x30 (host bus error) [ 2019.951265] ata3.00: status: { DRDY ERR } [ 2019.951267] ata3.00: error: { ICRC ABRT } [ 2019.951277] ata3: soft resetting link [ 2020.209291] ata3.00: configured for UDMA/33 [ 2020.209309] ata3: EH complete [ 2020.744976] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2020.744981] ata3.00: BMDMA stat 0x26 [ 2020.744985] ata3.00: failed command: WRITE DMA [ 2020.744991] ata3.00: cmd ca/00:a0:07:08:71/00:00:00:00:00/ed tag 0 dma 81920 out [ 2020.744992] res 51/84:81:26:08:71/84:01:0d:00:00/ed Emask 0x30 (host bus error) [ 2020.744995] ata3.00: status: { DRDY ERR } [ 2020.744998] ata3.00: error: { ICRC ABRT } [ 2020.745008] ata3: soft resetting link [ 2021.049020] ata3.00: configured for UDMA/33 [ 2021.049034] ata3: EH complete [ 2021.716872] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2021.716877] ata3.00: BMDMA stat 0x26 [ 2021.716882] ata3.00: failed command: WRITE DMA [ 2021.716888] ata3.00: cmd ca/00:18:3f:00:e8/00:00:00:00:00/ef tag 0 dma 12288 out [ 2021.716889] res 51/84:01:56:00:e8/84:01:0d:00:00/ef Emask 0x30 (host bus error) [ 2021.716893] ata3.00: status: { DRDY ERR } [ 2021.716895] ata3.00: error: { ICRC ABRT } [ 2021.716906] ata3: soft resetting link [ 2022.032930] ata3.00: configured for UDMA/33 [ 2022.032961] ata3: EH complete [ 2024.269925] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2024.269931] ata3.00: BMDMA stat 0x26 [ 2024.269935] ata3.00: failed command: WRITE DMA EXT [ 2024.269942] ata3.00: cmd 35/00:48:7f:62:e8/00:03:0a:00:00/e0 tag 0 dma 430080 out [ 2024.269943] res 51/84:08:bf:64:e8/84:01:0a:00:00/e0 Emask 0x30 (host bus error) [ 2024.269946] ata3.00: status: { DRDY ERR } [ 2024.269948] ata3.00: error: { ICRC ABRT } [ 2024.269960] ata3: soft resetting link [ 2024.465016] ata3.00: configured for UDMA/33 [ 2024.465033] ata3: EH complete [ 2024.530817] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2024.530823] ata3.00: BMDMA stat 0x26 [ 2024.530827] ata3.00: failed command: WRITE DMA EXT [ 2024.530833] ata3.00: cmd 35/00:00:1f:93:e8/00:04:0a:00:00/e0 tag 0 dma 524288 out [ 2024.530834] res 51/84:11:0e:95:e8/84:02:0a:00:00/e0 Emask 0x30 (host bus error) [ 2024.530837] ata3.00: status: { DRDY ERR } [ 2024.530840] ata3.00: error: { ICRC ABRT } [ 2024.530851] ata3: soft resetting link [ 2024.733271] ata3.00: configured for UDMA/33 [ 2024.733291] ata3: EH complete [ 2024.789829] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2024.789834] ata3.00: BMDMA stat 0x26 [ 2024.789838] ata3.00: failed command: WRITE DMA EXT [ 2024.789844] ata3.00: cmd 35/00:00:af:a0:e8/00:04:0a:00:00/e0 tag 0 dma 524288 out [ 2024.789846] res 51/84:45:6a:a2:e8/84:02:0a:00:00/e0 Emask 0x30 (host bus error) [ 2024.789849] ata3.00: status: { DRDY ERR } [ 2024.789851] ata3.00: error: { ICRC ABRT } [ 2024.789861] ata3: soft resetting link [ 2024.994519] ata3.00: configured for UDMA/33 [ 2024.994552] ata3: EH complete [ 2026.279471] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2026.279477] ata3.00: BMDMA stat 0x26 [ 2026.279481] ata3.00: failed command: WRITE DMA EXT [ 2026.279487] ata3.00: cmd 35/00:00:37:f8:f3/00:04:08:00:00/e0 tag 0 dma 524288 out [ 2026.279488] res 51/84:31:06:fc:f3/84:00:08:00:00/e0 Emask 0x30 (host bus error) [ 2026.279491] ata3.00: status: { DRDY ERR } [ 2026.279494] ata3.00: error: { ICRC ABRT } [ 2026.279504] ata3: soft resetting link [ 2026.472770] ata3.00: configured for UDMA/33 [ 2026.472783] ata3: EH complete [ 2028.132383] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2028.132388] ata3.00: BMDMA stat 0x26 [ 2028.132392] ata3.00: failed command: WRITE DMA [ 2028.132398] ata3.00: cmd ca/00:a8:27:16:f4/00:00:00:00:00/e8 tag 0 dma 86016 out [ 2028.132399] res 51/84:68:67:16:f4/84:00:08:00:00/e8 Emask 0x30 (host bus error) [ 2028.132402] ata3.00: status: { DRDY ERR } [ 2028.132405] ata3.00: error: { ICRC ABRT } [ 2028.132414] ata3: soft resetting link [ 2028.440500] ata3.00: configured for UDMA/33 [ 2028.440516] ata3: EH complete [ 2030.577481] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2030.577487] ata3.00: BMDMA stat 0x26 [ 2030.577491] ata3.00: failed command: WRITE DMA EXT [ 2030.577497] ata3.00: cmd 35/00:00:bf:16:f0/00:02:08:00:00/e0 tag 0 dma 262144 out [ 2030.577498] res 51/84:90:2f:17:f0/84:01:08:00:00/e0 Emask 0x30 (host bus error) [ 2030.577502] ata3.00: status: { DRDY ERR } [ 2030.577504] ata3.00: error: { ICRC ABRT } [ 2030.577516] ata3: soft resetting link [ 2030.824602] ata3.00: configured for UDMA/33 [ 2030.824623] ata3: EH complete [ 2033.019278] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2033.019283] ata3.00: BMDMA stat 0x26 [ 2033.019287] ata3.00: failed command: WRITE DMA [ 2033.019293] ata3.00: cmd ca/00:10:3f:00:88/00:00:00:00:00/e8 tag 0 dma 8192 out [ 2033.019294] res 51/84:01:4e:00:88/84:01:08:00:00/e8 Emask 0x30 (host bus error) [ 2033.019297] ata3.00: status: { DRDY ERR } [ 2033.019300] ata3.00: error: { ICRC ABRT } [ 2033.019310] ata3: soft resetting link [ 2033.436908] ata3.00: configured for UDMA/33 [ 2033.436927] ata3: EH complete [ 2043.293295] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2043.293300] ata3.00: BMDMA stat 0x26 [ 2043.293303] ata3.00: failed command: WRITE DMA [ 2043.293309] ata3.00: cmd ca/00:50:3f:46:f0/00:00:00:00:00/e8 tag 0 dma 40960 out [ 2043.293310] res 51/84:10:7f:46:f0/84:01:08:00:00/e8 Emask 0x30 (host bus error) [ 2043.293314] ata3.00: status: { DRDY ERR } [ 2043.293316] ata3.00: error: { ICRC ABRT } [ 2043.293326] ata3: soft resetting link [ 2043.548726] ata3.00: configured for UDMA/33 [ 2043.548742] ata3: EH complete [ 2045.675593] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2045.675597] ata3.00: BMDMA stat 0x26 [ 2045.675601] ata3.00: failed command: WRITE DMA EXT [ 2045.675607] ata3.00: cmd 35/00:c8:97:46:f0/00:03:08:00:00/e0 tag 0 dma 495616 out [ 2045.675609] res 51/84:38:27:4a:f0/84:00:08:00:00/e0 Emask 0x30 (host bus error) [ 2045.675612] ata3.00: status: { DRDY ERR } [ 2045.675614] ata3.00: error: { ICRC ABRT } [ 2045.675624] ata3: soft resetting link [ 2045.920827] ata3.00: configured for UDMA/33 [ 2045.920846] ata3: EH complete [ 2055.849159] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2055.849164] ata3.00: BMDMA stat 0x26 [ 2055.849168] ata3.00: failed command: WRITE DMA EXT [ 2055.849174] ata3.00: cmd 35/00:00:9f:d1:f1/00:04:02:00:00/e0 tag 0 dma 524288 out [ 2055.849175] res 51/84:d0:cf:d4:f1/84:00:02:00:00/e0 Emask 0x30 (host bus error) [ 2055.849178] ata3.00: status: { DRDY ERR } [ 2055.849180] ata3.00: error: { ICRC ABRT } [ 2055.849189] ata3: soft resetting link [ 2056.044690] ata3.00: configured for UDMA/33 [ 2056.044709] ata3: EH complete [ 2060.506479] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2060.506484] ata3.00: BMDMA stat 0x26 [ 2060.506488] ata3.00: failed command: WRITE DMA EXT [ 2060.506494] ata3.00: cmd 35/00:50:67:61:f0/00:03:08:00:00/e0 tag 0 dma 434176 out [ 2060.506495] res 51/84:36:81:62:f0/84:02:08:00:00/e0 Emask 0x30 (host bus error) [ 2060.506499] ata3.00: status: { DRDY ERR } [ 2060.506501] ata3.00: error: { ICRC ABRT } [ 2060.506511] ata3: soft resetting link [ 2060.760867] ata3.00: configured for UDMA/33 [ 2060.760885] ata3: EH complete [ 2068.070523] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 2068.070528] ata3.00: BMDMA stat 0x26 [ 2068.070532] ata3.00: failed command: WRITE DMA [ 2068.070538] ata3.00: cmd ca/00:88:3f:00:f8/00:00:00:00:00/e1 tag 0 dma 69632 out [ 2068.070539] res 51/84:28:9f:00:f8/84:02:08:00:00/e1 Emask 0x30 (host bus error) [ 2068.070543] ata3.00: status: { DRDY ERR } [ 2068.070545] ata3.00: error: { ICRC ABRT } [ 2068.070555] ata3: soft resetting link [ 2068.384550] ata3.00: configured for UDMA/33 [ 2068.384567] ata3: EH complete [ 2077.229256] depmod[3673]: segfault at 5a2bcbe3 ip 0038124b sp bfdc018c error 4 in libc-2.11.1.so[269000+153000]