[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #41-Ubuntu SMP Thu Aug 19 01:12:52 UTC 2010 (Ubuntu 2.6.32-24.41-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bef0000 (usable) [ 0.000000] BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3bef0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFE0000000 write-back [ 0.000000] 1 base 0020000000 mask FFF0000000 write-back [ 0.000000] 2 base 0030000000 mask FFF8000000 write-back [ 0.000000] 3 base 0038000000 mask FFFC000000 write-back [ 0.000000] 4 base 003BF00000 mask FFFFF00000 uncachable [ 0.000000] 5 base 00E0000000 mask FFF8000000 write-combining [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003bef0000 (usable) [ 0.000000] modified: 000000003bef0000 - 000000003bef3000 (ACPI NVS) [ 0.000000] modified: 000000003bef3000 - 000000003bf00000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 2c2e8000 - 2cf73828 [ 0.000000] ACPI: RSDP 000f7610 00014 (v00 FIC ) [ 0.000000] ACPI: RSDT 3bef3000 0002C (v01 FIC K8M-800M 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 3bef3040 00074 (v01 FIC K8M-800M 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 3bef30c0 05138 (v01 FIC AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 3bef0000 00040 [ 0.000000] ACPI: APIC 3bef8200 0005A (v01 FIC K8M-800M 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 70MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008ddeb8] TEXT DATA BSS ==> [0000100000 - 00008ddeb8] [ 0.000000] #4 [002c2e8000 - 002cf73828] RAMDISK ==> [002c2e8000 - 002cf73828] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [00008de000 - 00008e10ba] BRK ==> [00008de000 - 00008e10ba] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00f5b70] f5b70 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003bef0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003bef0 [ 0.000000] On node 0 totalpages: 245375 [ 0.000000] free_area_init_node: node 0, pgdat c079a780, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 142 pages used for memmap [ 0.000000] HighMem zone: 18020 pages, LIFO batch:3 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3bf00000 (gap: 3bf00000:c2d00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243457 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a7c393c6-177b-47f2-9f31-a48e01b2558c ro splash quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 4909440 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003bef0) [ 0.000000] Memory: 946860k/981952k available (4679k kernel code, 34288k reserved, 2124k data, 660k init, 72648k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a5000 - 0xc084a000 ( 660 kB) [ 0.000000] .data : 0xc0591e33 - 0xc07a4e88 (2124 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591e33 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1000.383 MHz processor. [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.76 BogoMIPS (lpj=4001532) [ 0.004043] Security Framework initialized [ 0.004090] AppArmor: AppArmor initialized [ 0.004104] Mount-cache hash table entries: 512 [ 0.004327] Initializing cgroup subsys ns [ 0.004335] Initializing cgroup subsys cpuacct [ 0.004343] Initializing cgroup subsys memory [ 0.004357] Initializing cgroup subsys devices [ 0.004362] Initializing cgroup subsys freezer [ 0.004367] Initializing cgroup subsys net_cls [ 0.004398] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004403] CPU: L2 Cache: 256K (64 bytes/line) [ 0.004411] mce: CPU supports 5 MCE banks [ 0.004436] Performance Events: AMD PMU driver. [ 0.004448] ... version: 0 [ 0.004451] ... bit width: 48 [ 0.004455] ... generic registers: 4 [ 0.004459] ... value mask: 0000ffffffffffff [ 0.004464] ... max period: 00007fffffffffff [ 0.004468] ... fixed-purpose events: 0 [ 0.004472] ... event mask: 000000000000000f [ 0.004479] Checking 'hlt' instruction... OK. [ 0.021163] SMP alternatives: switching to UP code [ 0.032544] Freeing SMP alternatives: 19k freed [ 0.032579] ACPI: Core revision 20090903 [ 0.044050] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.044070] ftrace: allocating 21780 entries in 43 pages [ 0.048149] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.048991] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.088093] CPU0: AMD Sempron(tm) Processor 3100+ stepping 02 [ 0.092001] Brought up 1 CPUs [ 0.092001] Total of 1 processors activated (2000.76 BogoMIPS). [ 0.092001] CPU0 attaching NULL sched-domain. [ 0.092001] devtmpfs: initialized [ 0.092001] regulator: core version 0.5 [ 0.092001] Time: 18:18:46 Date: 08/27/10 [ 0.092001] NET: Registered protocol family 16 [ 0.092001] EISA bus registered [ 0.092001] ACPI: bus type pci registered [ 0.098454] PCI: PCI BIOS revision 2.10 entry at 0xfba70, last bus=1 [ 0.098459] PCI: Using configuration type 1 for base access [ 0.100077] bio: create slab at 0 [ 0.101093] ACPI: EC: Look up EC in DSDT [ 0.106912] ACPI Warning: Package List length (0x5) larger than NumElements count (0x2), truncated [ 0.106922] (20090903/dsobject-515) [ 0.112336] ACPI: Interpreter enabled [ 0.112354] ACPI: (supports S0 S3 S4 S5) [ 0.112402] ACPI: Using IOAPIC for interrupt routing [ 0.122401] ACPI: No dock devices found. [ 0.122596] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.122674] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.123008] pci 0000:00:01.0: supports D1 [ 0.123058] pci 0000:00:0a.0: reg 10 io port: [0xb000-0xb0ff] [ 0.123068] pci 0000:00:0a.0: reg 14 32bit mmio: [0xee010000-0xee0100ff] [ 0.123097] pci 0000:00:0a.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.123121] pci 0000:00:0a.0: supports D1 D2 [ 0.123125] pci 0000:00:0a.0: PME# supported from D1 D2 D3hot D3cold [ 0.123133] pci 0000:00:0a.0: PME# disabled [ 0.123178] pci 0000:00:0f.0: reg 10 io port: [0xb400-0xb407] [ 0.123188] pci 0000:00:0f.0: reg 14 io port: [0xb800-0xb803] [ 0.123198] pci 0000:00:0f.0: reg 18 io port: [0xbc00-0xbc07] [ 0.123208] pci 0000:00:0f.0: reg 1c io port: [0xc000-0xc003] [ 0.123217] pci 0000:00:0f.0: reg 20 io port: [0xc400-0xc40f] [ 0.123227] pci 0000:00:0f.0: reg 24 io port: [0xc800-0xc8ff] [ 0.123310] pci 0000:00:0f.1: reg 20 io port: [0xcc00-0xcc0f] [ 0.123404] pci 0000:00:10.0: reg 20 io port: [0xd000-0xd01f] [ 0.123436] pci 0000:00:10.0: supports D1 D2 [ 0.123441] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.123447] pci 0000:00:10.0: PME# disabled [ 0.123503] pci 0000:00:10.1: reg 20 io port: [0xd400-0xd41f] [ 0.123536] pci 0000:00:10.1: supports D1 D2 [ 0.123540] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.123547] pci 0000:00:10.1: PME# disabled [ 0.123603] pci 0000:00:10.2: reg 20 io port: [0xd800-0xd81f] [ 0.123635] pci 0000:00:10.2: supports D1 D2 [ 0.123639] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.123646] pci 0000:00:10.2: PME# disabled [ 0.123702] pci 0000:00:10.3: reg 20 io port: [0xdc00-0xdc1f] [ 0.123733] pci 0000:00:10.3: supports D1 D2 [ 0.123737] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.123744] pci 0000:00:10.3: PME# disabled [ 0.123786] pci 0000:00:10.4: reg 10 32bit mmio: [0xee011000-0xee0110ff] [ 0.123833] pci 0000:00:10.4: supports D1 D2 [ 0.123837] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.123844] pci 0000:00:10.4: PME# disabled [ 0.123916] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.123982] pci 0000:00:11.5: reg 10 io port: [0xe000-0xe0ff] [ 0.124042] pci 0000:00:11.5: supports D1 D2 [ 0.124216] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe8000000-0xebffffff] [ 0.124225] pci 0000:01:00.0: reg 14 32bit mmio: [0xec000000-0xecffffff] [ 0.124246] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.124268] pci 0000:01:00.0: supports D1 D2 [ 0.124311] pci 0000:00:01.0: bridge 32bit mmio: [0xec000000-0xedffffff] [ 0.124319] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xebffffff] [ 0.124330] pci_bus 0000:00: on NUMA node 0 [ 0.124339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.228688] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) [ 0.228973] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [ 0.229260] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5 [ 0.229511] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.229754] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.229987] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.230217] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.230446] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.230755] ACPI: PCI Interrupt Link [ALKA] (IRQs *20) [ 0.231039] ACPI: PCI Interrupt Link [ALKB] (IRQs *21) [ 0.231321] ACPI: PCI Interrupt Link [ALKC] (IRQs *22) [ 0.231663] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled. [ 0.231857] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.231862] vgaarb: loaded [ 0.232094] SCSI subsystem initialized [ 0.232228] libata version 3.00 loaded. [ 0.232354] usbcore: registered new interface driver usbfs [ 0.232385] usbcore: registered new interface driver hub [ 0.232430] usbcore: registered new device driver usb [ 0.232651] ACPI: WMI: Mapper loaded [ 0.232655] PCI: Using ACPI for IRQ routing [ 0.232899] NetLabel: Initializing [ 0.232903] NetLabel: domain hash size = 128 [ 0.232906] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.232931] NetLabel: unlabeled traffic allowed by default [ 0.233036] Switching to clocksource tsc [ 0.236001] AppArmor: AppArmor Filesystem Enabled [ 0.236001] pnp: PnP ACPI init [ 0.236001] ACPI: bus type pnp registered [ 0.241869] pnp: PnP ACPI: found 12 devices [ 0.241874] ACPI: ACPI bus type pnp unregistered [ 0.241883] PnPBIOS: Disabled by ACPI PNP [ 0.241904] system 00:00: iomem range 0xcd000-0xcffff has been reserved [ 0.241911] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved [ 0.241917] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 0.241924] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 0.241931] system 00:00: iomem range 0x3bf00000-0x3bffffff could not be reserved [ 0.241938] system 00:00: iomem range 0x3bef0000-0x3befffff could not be reserved [ 0.241945] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.241951] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.241958] system 00:00: iomem range 0x100000-0x3beeffff could not be reserved [ 0.241965] system 00:00: iomem range 0x3c000000-0x3fffffff has been reserved [ 0.241972] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.241978] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.241985] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.241998] system 00:02: ioport range 0x4000-0x407f has been reserved [ 0.242004] system 00:02: ioport range 0x5000-0x500f has been reserved [ 0.242015] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 0.242022] system 00:03: ioport range 0x800-0x805 has been reserved [ 0.242028] system 00:03: ioport range 0x290-0x297 has been reserved [ 0.276896] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.276901] pci 0000:00:01.0: IO window: disabled [ 0.276910] pci 0000:00:01.0: MEM window: 0xec000000-0xedffffff [ 0.276918] pci 0000:00:01.0: PREFETCH window: 0xe8000000-0xebffffff [ 0.276938] pci 0000:00:01.0: setting latency timer to 64 [ 0.276947] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.276953] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.276960] pci_bus 0000:01: resource 1 mem: [0xec000000-0xedffffff] [ 0.276966] pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xebffffff] [ 0.277032] NET: Registered protocol family 2 [ 0.277208] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.277842] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.279320] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.280039] TCP: Hash tables configured (established 131072 bind 65536) [ 0.280045] TCP reno registered [ 0.280225] NET: Registered protocol family 1 [ 0.280267] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.280385] pci 0000:01:00.0: Boot video device [ 0.280737] cpufreq-nforce2: No nForce2 chipset. [ 0.280785] Scanning for low memory corruption every 60 seconds [ 0.280980] audit: initializing netlink socket (disabled) [ 0.281004] type=2000 audit(1282933126.278:1): initialized [ 0.301199] Trying to unpack rootfs image as initramfs... [ 0.323621] highmem bounce pool size: 64 pages [ 0.323633] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.331070] VFS: Disk quotas dquot_6.5.2 [ 0.331231] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.332324] fuse init (API version 7.13) [ 0.332488] msgmni has been set to 1708 [ 0.332851] alg: No test for stdrng (krng) [ 0.332962] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.332969] io scheduler noop registered [ 0.332973] io scheduler anticipatory registered [ 0.332977] io scheduler deadline registered [ 0.333054] io scheduler cfq registered (default) [ 0.333261] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.333300] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.333458] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.333466] ACPI: Power Button [PWRB] [ 0.333564] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.333569] ACPI: Power Button [PWRF] [ 0.333639] fan PNP0C0B:00: registered as cooling_device0 [ 0.333649] ACPI: Fan [FAN] (on) [ 0.334142] processor LNXCPU:00: registered as cooling_device1 [ 0.423883] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.423914] ACPI: Thermal Zone [THRM] (42 C) [ 0.426576] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.426708] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.427263] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.429207] brd: module loaded [ 0.430099] loop: module loaded [ 0.430287] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.435344] isapnp: Scanning for PnP cards... [ 0.440997] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 0.441007] alloc irq_desc for 20 on node -1 [ 0.441012] alloc kstat_irqs on node -1 [ 0.441027] pata_acpi 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 0.441128] pata_acpi 0000:00:0f.0: PCI INT B disabled [ 0.441167] pata_acpi 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 0.441203] pata_acpi 0000:00:0f.1: PCI INT A disabled [ 0.441803] Fixed MDIO Bus: probed [ 0.441868] PPP generic driver version 2.4.2 [ 0.441978] tun: Universal TUN/TAP device driver, 1.6 [ 0.441982] tun: (C) 1999-2004 Max Krasnyansky [ 0.442140] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.442532] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 0.442540] alloc irq_desc for 21 on node -1 [ 0.442544] alloc kstat_irqs on node -1 [ 0.442555] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.442584] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 0.442651] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 0.442743] ehci_hcd 0000:00:10.4: irq 21, io mem 0xee011000 [ 0.490791] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 0.491056] usb usb1: configuration #1 chosen from 1 choice [ 0.491114] hub 1-0:1.0: USB hub found [ 0.491133] hub 1-0:1.0: 8 ports detected [ 0.491246] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.491279] uhci_hcd: USB Universal Host Controller Interface driver [ 0.491372] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.491385] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.491449] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.491482] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d000 [ 0.491646] usb usb2: configuration #1 chosen from 1 choice [ 0.491693] hub 2-0:1.0: USB hub found [ 0.491708] hub 2-0:1.0: 2 ports detected [ 0.491780] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.491790] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.491849] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.491875] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d400 [ 0.492035] usb usb3: configuration #1 chosen from 1 choice [ 0.492081] hub 3-0:1.0: USB hub found [ 0.492095] hub 3-0:1.0: 2 ports detected [ 0.492163] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.492172] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.492240] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.492266] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800 [ 0.492435] usb usb4: configuration #1 chosen from 1 choice [ 0.492481] hub 4-0:1.0: USB hub found [ 0.492494] hub 4-0:1.0: 2 ports detected [ 0.492566] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.492575] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 0.492636] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 0.492663] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000dc00 [ 0.492823] usb usb5: configuration #1 chosen from 1 choice [ 0.492869] hub 5-0:1.0: USB hub found [ 0.492884] hub 5-0:1.0: 2 ports detected [ 0.493045] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.499396] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.499418] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.499706] mice: PS/2 mouse device common for all mice [ 0.499919] rtc_cmos 00:05: RTC can wake from S4 [ 0.499997] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.500057] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.500267] device-mapper: uevent: version 1.0.3 [ 0.500468] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.500558] device-mapper: multipath: version 1.1.0 loaded [ 0.500564] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.500778] EISA: Probing bus 0 at eisa.0 [ 0.500804] Cannot allocate resource for EISA slot 4 [ 0.500809] Cannot allocate resource for EISA slot 5 [ 0.500827] EISA: Detected 0 cards. [ 0.503481] cpuidle: using governor ladder [ 0.503487] cpuidle: using governor menu [ 0.504361] TCP cubic registered [ 0.504641] NET: Registered protocol family 10 [ 0.505579] lo: Disabled Privacy Extensions [ 0.506266] NET: Registered protocol family 17 [ 0.506329] powernow-k8: Found 1 AMD Sempron(tm) Processor 3100+ processors (1 cpu cores) (version 2.20.00) [ 0.506402] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 [ 0.506408] powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 [ 0.506455] Marking TSC unstable due to cpufreq changes [ 0.516566] Switching to clocksource acpi_pm [ 0.526730] Using IPI No-Shortcut mode [ 0.526877] PM: Resume from disk failed. [ 0.526896] registered taskstats version 1 [ 0.527193] Magic number: 6:223:343 [ 0.527236] tty tty60: hash matches [ 0.527341] rtc_cmos 00:05: setting system clock to 2010-08-27 18:18:47 UTC (1282933127) [ 0.527345] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.527347] EDD information not available. [ 0.537663] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.119912] isapnp: No Plug & Play device found [ 1.156046] Freeing initrd memory: 12846k freed [ 1.172769] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 1.172817] Freeing unused kernel memory: 660k freed [ 1.173750] Write protecting the kernel text: 4680k [ 1.173784] Write protecting the kernel read-only data: 1844k [ 1.203271] udev: starting version 151 [ 1.347971] usb 5-1: configuration #1 chosen from 1 choice [ 1.451739] vga16fb: initializing [ 1.451747] vga16fb: mapped to 0xc00a0000 [ 1.451825] fb0: VGA16 VGA frame buffer device [ 1.454587] pata_via 0000:00:0f.1: version 0.3.4 [ 1.454613] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 1.455953] Linux agpgart interface v0.103 [ 1.461619] scsi0 : pata_via [ 1.461922] scsi1 : pata_via [ 1.463518] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xcc00 irq 14 [ 1.463522] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xcc08 irq 15 [ 1.463627] sata_via 0000:00:0f.0: version 2.4 [ 1.463644] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 1.463694] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 1.470173] scsi2 : sata_via [ 1.470431] scsi3 : sata_via [ 1.470490] ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb800 bmdma 0xc400 irq 20 [ 1.470494] ata4: SATA max UDMA/133 cmd 0xbc00 ctl 0xc000 bmdma 0xc408 irq 20 [ 1.470731] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204] [ 1.480513] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.480559] Initializing USB Mass Storage driver... [ 1.480718] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xe0000000 [ 1.480740] 8139cp 0000:00:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.481003] scsi4 : SCSI emulation for USB Mass Storage devices [ 1.481166] usbcore: registered new interface driver usb-storage [ 1.481170] USB Mass Storage support registered. [ 1.481259] usb-storage: device found at 2 [ 1.481261] usb-storage: waiting for device to settle before scanning [ 1.680021] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 1.828338] ata1.00: HPA unlocked: 312497887 -> 312500000, native 312500000 [ 1.828344] ata1.00: ATA-7: ST3160815A, 3.ADA, max UDMA/100 [ 1.828348] ata1.00: 312500000 sectors, multi 16: LBA48 [ 1.871453] ata1.00: configured for UDMA/100 [ 1.871599] scsi 0:0:0:0: Direct-Access ATA ST3160815A 3.AD PQ: 0 ANSI: 5 [ 1.871790] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.872279] sd 0:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB) [ 1.872329] sd 0:0:0:0: [sda] Write Protect is off [ 1.872333] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.872358] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.872523] sda: sda1 sda2 < sda5 > [ 1.940600] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.036531] ata2.00: ATAPI: HP DVD Writer 640b, E193, max UDMA/33 [ 2.052422] ata2.00: configured for UDMA/33 [ 2.058520] scsi 1:0:0:0: CD-ROM HP DVD Writer 640b E193 PQ: 0 ANSI: 5 [ 2.064147] sr0: scsi3-mmc drive: 24x/40x writer cd/rw xa/form2 cdda tray [ 2.064152] Uniform CD-ROM driver Revision: 3.20 [ 2.064305] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.064381] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.268022] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 2.291249] 8139too Fast Ethernet driver 0.9.28 [ 2.291297] alloc irq_desc for 17 on node -1 [ 2.291300] alloc kstat_irqs on node -1 [ 2.291312] 8139too 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.292392] eth0: RealTek RTL8139 at 0xb000, 00:40:ca:a8:e4:2f, IRQ 17 [ 2.459030] Console: switching to colour frame buffer device 80x30 [ 3.042485] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 4.903878] Adding 1466360k swap on /dev/sda5. Priority:-1 extents:1 across:1466360k [ 5.439286] udev: starting version 151 [ 6.024153] udev: renamed network interface eth0 to eth2 [ 6.482903] usb-storage: device scan complete [ 6.485996] scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 6.488989] scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 6.491978] scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 6.495508] scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 6.498904] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 6.500549] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 6.502155] sd 4:0:0:2: Attached scsi generic sg4 type 0 [ 6.504769] sd 4:0:0:3: Attached scsi generic sg5 type 0 [ 6.526734] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 6.541028] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 6.552989] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 6.557972] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 6.558177] type=1505 audit(1282933133.528:2): operation="profile_load" pid=482 name="/sbin/dhclient3" [ 6.558497] type=1505 audit(1282933133.528:3): operation="profile_load" pid=482 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 6.558676] type=1505 audit(1282933133.528:4): operation="profile_load" pid=482 name="/usr/lib/connman/scripts/dhclient-script" [ 6.864903] ACPI: resource vt596_smbus [0x5000-0x5007] conflicts with ACPI region SM06 [0x5006-0x5006] [ 6.864908] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.884495] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.066179] psmouse serio1: ID: 10 00 64 [ 7.133089] lp: driver loaded but no devices found [ 7.146771] parport_pc 00:09: reported by Plug and Play ACPI [ 7.146819] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 7.244215] lp0: using parport0 (interrupt-driven). [ 7.303740] ppdev: user-space parallel port driver [ 7.631630] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 9.348145] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 9.348155] alloc irq_desc for 22 on node -1 [ 9.348158] alloc kstat_irqs on node -1 [ 9.348167] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 9.348327] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 9.832798] type=1505 audit(1282933136.805:5): operation="profile_load" pid=755 name="/usr/share/gdm/guest-session/Xsession" [ 9.835058] type=1505 audit(1282933136.805:6): operation="profile_replace" pid=758 name="/sbin/dhclient3" [ 9.835399] type=1505 audit(1282933136.805:7): operation="profile_replace" pid=758 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 9.835591] type=1505 audit(1282933136.805:8): operation="profile_replace" pid=758 name="/usr/lib/connman/scripts/dhclient-script" [ 9.899577] type=1505 audit(1282933136.868:9): operation="profile_load" pid=759 name="/usr/bin/evince" [ 9.904954] type=1505 audit(1282933136.876:10): operation="profile_load" pid=759 name="/usr/bin/evince-previewer" [ 9.907748] type=1505 audit(1282933136.876:11): operation="profile_load" pid=759 name="/usr/bin/evince-thumbnailer" [ 12.298373] eth2: link up, 100Mbps, full-duplex, lpa 0x41E1