[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 (Ubuntu 2.6.32-22.36-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000004767e000 (usable) [ 0.000000] BIOS-e820: 000000004767e000 - 00000000476e0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000476e0000 - 00000000476eb000 (ACPI data) [ 0.000000] BIOS-e820: 00000000476eb000 - 0000000047700000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000047700000 - 0000000048000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x4767e max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FF8000000 write-back [ 0.000000] 2 base 047700000 mask FFFF00000 uncachable [ 0.000000] 3 base 047800000 mask FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d8000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000004767e000 (usable) [ 0.000000] modified: 000000004767e000 - 00000000476e0000 (ACPI NVS) [ 0.000000] modified: 00000000476e0000 - 00000000476eb000 (ACPI data) [ 0.000000] modified: 00000000476eb000 - 0000000047700000 (ACPI NVS) [ 0.000000] modified: 0000000047700000 - 0000000048000000 (reserved) [ 0.000000] modified: 00000000fec10000 - 00000000fec20000 (reserved) [ 0.000000] modified: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37859000 - 37fef58a [ 0.000000] Allocated new RAMDISK: 008de000 - 0107458a [ 0.000000] Move RAMDISK from 0000000037859000 - 0000000037fef589 to 008de000 - 01074589 [ 0.000000] ACPI: RSDP 000f5ea0 00014 (v00 DELL ) [ 0.000000] ACPI: RSDT 476e4e2e 00038 (v01 DELL Montara 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 476eae9e 00074 (v01 DELL MONTARA 06040000 PTL 00000050) [ 0.000000] ACPI: DSDT 476e5416 05A88 (v01 INTEL MONTARAG 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 476fbfc0 00040 [ 0.000000] ACPI: BOOT 476eafa4 00028 (v01 DELL $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: ASF! 476eafcc 00034 (v01 DELL MONTARA 06040000 PTL 00000001) [ 0.000000] ACPI: SSDT 476e52c4 0014A (v01 INTEL CPU0CST 00000001 INTL 20020725) [ 0.000000] ACPI: SSDT 476e4e66 00356 (v01 DELL MONTARA 06040000 INTL 20020725) [ 0.000000] 254MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd18c] BRK ==> [00008da000 - 00008dd18c] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008de000 - 000107458a] NEW RAMDISK ==> [00008de000 - 000107458a] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0004767e [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0004767e [ 0.000000] On node 0 totalpages: 292365 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1076200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 509 pages used for memmap [ 0.000000] HighMem zone: 64643 pages, LIFO batch:15 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000 [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 48000000 (gap: 48000000:b6c10000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36024 r0 d21320 u4194304 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 290080 [ 0.000000] Kernel command line: root=UUID=ea1a6182-4b6b-41dc-91cb-c4073a273dac ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5849240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0004767e) [ 0.000000] Memory: 1137248k/1169912k available (4673k kernel code, 31592k reserved, 2121k data, 656k init, 260608k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590663 - 0xc07a2e48 (2121 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590663 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1395.471 MHz processor. [ 0.012011] Calibrating delay loop (skipped), value calculated using timer frequency.. 2790.94 BogoMIPS (lpj=5581884) [ 0.012041] Security Framework initialized [ 0.012090] AppArmor: AppArmor initialized [ 0.012103] Mount-cache hash table entries: 512 [ 0.012322] Initializing cgroup subsys ns [ 0.012331] Initializing cgroup subsys cpuacct [ 0.012338] Initializing cgroup subsys memory [ 0.012352] Initializing cgroup subsys devices [ 0.012356] Initializing cgroup subsys freezer [ 0.012360] Initializing cgroup subsys net_cls [ 0.012397] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.012401] CPU: L2 cache: 2048K [ 0.012409] mce: CPU supports 5 MCE banks [ 0.012436] Performance Events: [ 0.012440] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.012443] no hardware sampling interrupt available. [ 0.012447] p6 PMU driver. [ 0.012455] ... version: 0 [ 0.012458] ... bit width: 32 [ 0.012461] ... generic registers: 2 [ 0.012464] ... value mask: 00000000ffffffff [ 0.012467] ... max period: 000000007fffffff [ 0.012470] ... fixed-purpose events: 0 [ 0.012473] ... event mask: 0000000000000003 [ 0.012480] Checking 'hlt' instruction... OK. [ 0.029193] SMP alternatives: switching to UP code [ 0.038776] Freeing SMP alternatives: 19k freed [ 0.038790] ACPI: Core revision 20090903 [ 0.050509] ACPI: setting ELCR to 0200 (from 0c20) [ 0.052011] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.052018] ftrace: allocating 21771 entries in 43 pages [ 0.060087] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.060094] weird, boot CPU (#0) not listed by the BIOS. [ 0.060097] SMP motherboard not detected. [ 0.060101] Local APIC not detected. Using dummy APIC emulation. [ 0.060105] SMP disabled [ 0.060255] Brought up 1 CPUs [ 0.060258] Total of 1 processors activated (2790.94 BogoMIPS). [ 0.062023] CPU0 attaching NULL sched-domain. [ 0.062231] devtmpfs: initialized [ 0.062747] regulator: core version 0.5 [ 0.062771] Time: 15:41:17 Date: 08/26/10 [ 0.062831] NET: Registered protocol family 16 [ 0.062990] EISA bus registered [ 0.063002] ACPI: bus type pci registered [ 0.063235] PCI: PCI BIOS revision 2.10 entry at 0xfd9b0, last bus=2 [ 0.063239] PCI: Using configuration type 1 for base access [ 0.064560] bio: create slab at 0 [ 0.065389] ACPI: EC: Look up EC in DSDT [ 0.072192] ACPI: Interpreter enabled [ 0.072211] ACPI: (supports S0 S3 S4 S5) [ 0.072239] ACPI: Using PIC for interrupt routing [ 0.076421] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.082781] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.082851] ACPI: Power Resource [PFAN] (on) [ 0.083679] ACPI: ACPI Dock Station Driver: 1 docks/bays found [ 0.084538] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.084696] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.084703] pci 0000:00:02.0: reg 14 32bit mmio: [0xe0000000-0xe007ffff] [ 0.084709] pci 0000:00:02.0: reg 18 io port: [0x1800-0x1807] [ 0.084731] pci 0000:00:02.0: supports D1 [ 0.084752] pci 0000:00:02.1: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.084759] pci 0000:00:02.1: reg 14 32bit mmio: [0xe0080000-0xe00fffff] [ 0.084783] pci 0000:00:02.1: supports D1 [ 0.084855] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] [ 0.084909] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] [ 0.084960] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] [ 0.085012] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0100000-0xe01003ff] [ 0.085063] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.085069] pci 0000:00:1d.7: PME# disabled [ 0.085152] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.085158] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO [ 0.085182] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.085190] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.085198] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.085206] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.085213] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] [ 0.085222] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.085272] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f] [ 0.085314] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff] [ 0.085322] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff] [ 0.085330] pci 0000:00:1f.5: reg 18 32bit mmio: [0xe0100c00-0xe0100dff] [ 0.085338] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xe0100800-0xe01008ff] [ 0.085366] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.085371] pci 0000:00:1f.5: PME# disabled [ 0.085402] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff] [ 0.085410] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f] [ 0.085446] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.085451] pci 0000:00:1f.6: PME# disabled [ 0.085492] pci 0000:02:03.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.085509] pci 0000:02:03.0: supports D1 D2 [ 0.085512] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.085517] pci 0000:02:03.0: PME# disabled [ 0.085547] pci 0000:02:03.1: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.085565] pci 0000:02:03.1: supports D1 D2 [ 0.085568] pci 0000:02:03.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.085573] pci 0000:02:03.1: PME# disabled [ 0.085603] pci 0000:02:03.2: reg 10 32bit mmio: [0xe0212000-0xe02127ff] [ 0.085644] pci 0000:02:03.2: PME# supported from D0 D3hot D3cold [ 0.085648] pci 0000:02:03.2: PME# disabled [ 0.085675] pci 0000:02:04.0: reg 10 32bit mmio: [0xe0210000-0xe0211fff] [ 0.085751] pci 0000:02:05.0: reg 10 64bit mmio: [0xe0200000-0xe020ffff] [ 0.085801] pci 0000:02:05.0: PME# supported from D3hot D3cold [ 0.085807] pci 0000:02:05.0: PME# disabled [ 0.085842] pci 0000:00:1e.0: transparent bridge [ 0.085850] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0200000-0xe02fffff] [ 0.085891] pci_bus 0000:00: on NUMA node 0 [ 0.085898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.086121] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.089944] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) [ 0.090124] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) [ 0.090301] ACPI: PCI Interrupt Link [LNKC] (IRQs *11) [ 0.090478] ACPI: PCI Interrupt Link [LNKD] (IRQs *11) [ 0.090654] ACPI: PCI Interrupt Link [LNKE] (IRQs *5) [ 0.090831] ACPI: PCI Interrupt Link [LNKF] (IRQs 5) *0, disabled. [ 0.091009] ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled. [ 0.091187] ACPI: PCI Interrupt Link [LNKH] (IRQs *10) [ 0.091317] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.091330] vgaarb: loaded [ 0.091484] SCSI subsystem initialized [ 0.091537] libata version 3.00 loaded. [ 0.091642] usbcore: registered new interface driver usbfs [ 0.091659] usbcore: registered new interface driver hub [ 0.091692] usbcore: registered new device driver usb [ 0.091862] ACPI: WMI: Mapper loaded [ 0.091864] PCI: Using ACPI for IRQ routing [ 0.092082] NetLabel: Initializing [ 0.092085] NetLabel: domain hash size = 128 [ 0.092087] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.092105] NetLabel: unlabeled traffic allowed by default [ 0.092143] Switching to clocksource tsc [ 0.094868] AppArmor: AppArmor Filesystem Enabled [ 0.094884] pnp: PnP ACPI init [ 0.094898] ACPI: bus type pnp registered [ 0.100878] pnp: PnP ACPI: found 9 devices [ 0.100882] ACPI: ACPI bus type pnp unregistered [ 0.100888] PnPBIOS: Disabled by ACPI PNP [ 0.100903] system 00:04: ioport range 0x600-0x60f has been reserved [ 0.100907] system 00:04: ioport range 0x700-0x70f has been reserved [ 0.100912] system 00:04: ioport range 0x800-0x80f has been reserved [ 0.100916] system 00:04: ioport range 0x1000-0x107f has been reserved [ 0.100921] system 00:04: ioport range 0x1180-0x11bf has been reserved [ 0.100925] system 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved [ 0.135676] pci 0000:02:03.0: CardBus bridge, secondary bus 0000:03 [ 0.135680] pci 0000:02:03.0: IO window: 0x003000-0x0030ff [ 0.135685] pci 0000:02:03.0: IO window: 0x003400-0x0034ff [ 0.135691] pci 0000:02:03.0: PREFETCH window: 0x48000000-0x4bffffff [ 0.135697] pci 0000:02:03.0: MEM window: 0x54000000-0x57ffffff [ 0.135702] pci 0000:02:03.1: CardBus bridge, secondary bus 0000:07 [ 0.135706] pci 0000:02:03.1: IO window: 0x003800-0x0038ff [ 0.135711] pci 0000:02:03.1: IO window: 0x003c00-0x003cff [ 0.135717] pci 0000:02:03.1: PREFETCH window: 0x4c000000-0x4fffffff [ 0.135722] pci 0000:02:03.1: MEM window: 0x58000000-0x5bffffff [ 0.135728] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.135732] pci 0000:00:1e.0: IO window: 0x3000-0x3fff [ 0.135739] pci 0000:00:1e.0: MEM window: 0xe0200000-0xe02fffff [ 0.135745] pci 0000:00:1e.0: PREFETCH window: 0x48000000-0x4fffffff [ 0.135761] pci 0000:00:1e.0: setting latency timer to 64 [ 0.135771] pci 0000:02:03.0: enabling device (0000 -> 0003) [ 0.135977] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 0.135981] PCI: setting IRQ 10 as level-triggered [ 0.135987] pci 0000:02:03.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 0.135994] pci 0000:02:03.0: setting latency timer to 64 [ 0.136003] pci 0000:02:03.1: enabling device (0000 -> 0003) [ 0.136184] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 0.136189] pci 0000:02:03.1: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 0.136196] pci 0000:02:03.1: setting latency timer to 64 [ 0.136202] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.136206] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.136211] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] [ 0.136215] pci_bus 0000:02: resource 1 mem: [0xe0200000-0xe02fffff] [ 0.136219] pci_bus 0000:02: resource 2 pref mem [0x48000000-0x4fffffff] [ 0.136223] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.136226] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.136230] pci_bus 0000:03: resource 0 io: [0x3000-0x30ff] [ 0.136234] pci_bus 0000:03: resource 1 io: [0x3400-0x34ff] [ 0.136238] pci_bus 0000:03: resource 2 pref mem [0x48000000-0x4bffffff] [ 0.136242] pci_bus 0000:03: resource 3 mem: [0x54000000-0x57ffffff] [ 0.136246] pci_bus 0000:07: resource 0 io: [0x3800-0x38ff] [ 0.136250] pci_bus 0000:07: resource 1 io: [0x3c00-0x3cff] [ 0.136254] pci_bus 0000:07: resource 2 pref mem [0x4c000000-0x4fffffff] [ 0.136258] pci_bus 0000:07: resource 3 mem: [0x58000000-0x5bffffff] [ 0.136298] NET: Registered protocol family 2 [ 0.136414] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.136823] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.137964] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.138746] TCP: Hash tables configured (established 131072 bind 65536) [ 0.138752] TCP reno registered [ 0.138909] NET: Registered protocol family 1 [ 0.138946] pci 0000:00:02.0: Boot video device [ 0.139191] Simple Boot Flag at 0x38 set to 0x1 [ 0.139321] cpufreq-nforce2: No nForce2 chipset. [ 0.139357] Scanning for low memory corruption every 60 seconds [ 0.139527] audit: initializing netlink socket (disabled) [ 0.139552] type=2000 audit(1282837277.135:1): initialized [ 0.154468] Trying to unpack rootfs image as initramfs... [ 0.171907] highmem bounce pool size: 64 pages [ 0.171917] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.174133] VFS: Disk quotas dquot_6.5.2 [ 0.174217] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.180204] fuse init (API version 7.13) [ 0.180338] msgmni has been set to 1713 [ 0.180648] alg: No test for stdrng (krng) [ 0.180727] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.180732] io scheduler noop registered [ 0.180734] io scheduler anticipatory registered [ 0.180737] io scheduler deadline registered [ 0.180800] io scheduler cfq registered (default) [ 0.180962] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.180995] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.182107] ACPI: AC Adapter [ADP1] (on-line) [ 0.182229] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.183188] ACPI: Lid Switch [LID0] [ 0.183254] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.183258] ACPI: Sleep Button [SLPB] [ 0.183320] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.183326] ACPI: Power Button [PWRB] [ 0.183399] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.183403] ACPI: Power Button [PWRF] [ 0.183566] fan PNP0C0B:00: registered as cooling_device0 [ 0.183574] ACPI: Fan [FAN0] (on) [ 0.183966] Marking TSC unstable due to TSC halts in idle [ 0.184010] processor LNXCPU:00: registered as cooling_device1 [ 0.186166] Switching to clocksource acpi_pm [ 0.201742] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.201757] ACPI: Thermal Zone [THRM] (32 C) [ 0.203861] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.203997] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.204386] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 0.204396] serial 0000:00:1f.6: PCI INT B disabled [ 0.205755] brd: module loaded [ 0.206416] loop: module loaded [ 0.206539] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.206675] ata_piix 0000:00:1f.1: version 2.13 [ 0.206687] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.206931] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.206935] PCI: setting IRQ 11 as level-triggered [ 0.206941] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.206997] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.212341] scsi0 : ata_piix [ 0.212684] isapnp: Scanning for PnP cards... [ 0.218311] scsi1 : ata_piix [ 0.219209] ACPI: Battery Slot [BAT2] (battery absent) [ 0.219242] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 [ 0.219247] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 [ 0.222152] ACPI: Battery Slot [BAT1] (battery present) [ 0.222229] ata2: port disabled. ignoring. [ 0.224517] Fixed MDIO Bus: probed [ 0.224570] PPP generic driver version 2.4.2 [ 0.224654] tun: Universal TUN/TAP device driver, 1.6 [ 0.224657] tun: (C) 1999-2004 Max Krasnyansky [ 0.224776] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.224999] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 [ 0.225006] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 0.225030] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.225035] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.225085] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.229013] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.280498] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xe0100000 [ 0.296574] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.296772] usb usb1: configuration #1 chosen from 1 choice [ 0.296818] hub 1-0:1.0: USB hub found [ 0.296832] hub 1-0:1.0: 6 ports detected [ 0.296929] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.296955] uhci_hcd: USB Universal Host Controller Interface driver [ 0.297031] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 0.297043] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.297049] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.297100] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.297128] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001820 [ 0.297245] usb usb2: configuration #1 chosen from 1 choice [ 0.297282] hub 2-0:1.0: USB hub found [ 0.297292] hub 2-0:1.0: 2 ports detected [ 0.297611] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.297616] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.297624] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.297628] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.297679] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.297703] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840 [ 0.297827] usb usb3: configuration #1 chosen from 1 choice [ 0.297863] hub 3-0:1.0: USB hub found [ 0.297872] hub 3-0:1.0: 2 ports detected [ 0.297927] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.297935] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.297939] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.297983] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.298005] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860 [ 0.298128] usb usb4: configuration #1 chosen from 1 choice [ 0.298167] hub 4-0:1.0: USB hub found [ 0.298176] hub 4-0:1.0: 2 ports detected [ 0.298294] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.300523] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.305651] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.305663] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.305708] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.305744] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.305774] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.305936] mice: PS/2 mouse device common for all mice [ 0.306218] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.306242] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 0.306415] device-mapper: uevent: version 1.0.3 [ 0.309105] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.309809] device-mapper: multipath: version 1.1.0 loaded [ 0.309813] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.312158] EISA: Probing bus 0 at eisa.0 [ 0.312166] Cannot allocate resource for EISA slot 1 [ 0.312171] Cannot allocate resource for EISA slot 2 [ 0.312174] Cannot allocate resource for EISA slot 3 [ 0.312190] EISA: Detected 0 cards. [ 0.314531] cpuidle: using governor ladder [ 0.314616] cpuidle: using governor menu [ 0.315233] TCP cubic registered [ 0.315457] NET: Registered protocol family 10 [ 0.316106] lo: Disabled Privacy Extensions [ 0.316530] NET: Registered protocol family 17 [ 0.316884] Using IPI No-Shortcut mode [ 0.317001] PM: Resume from disk failed. [ 0.317022] registered taskstats version 1 [ 0.317322] Magic number: 6:689:690 [ 0.317379] mem mem: hash matches [ 0.317448] rtc_cmos 00:01: setting system clock to 2010-08-26 15:41:18 UTC (1282837278) [ 0.317453] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.317456] EDD information not available. [ 0.329341] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.380558] ata1.00: ATA-5: TOSHIBA MK3021GAS, GA129D, max UDMA/100 [ 0.380563] ata1.00: 58605120 sectors, multi 16: LBA [ 0.389203] ata1.00: configured for UDMA/100 [ 0.822020] Freeing initrd memory: 7769k freed [ 0.873556] isapnp: No Plug & Play device found [ 0.873879] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3021GA GA12 PQ: 0 ANSI: 5 [ 0.874197] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.874367] sd 0:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB) [ 0.874436] sd 0:0:0:0: [sda] Write Protect is off [ 0.874440] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.874475] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.874697] sda: [ 0.928052] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 0.946160] sda1 sda2 < sda5 > [ 0.969037] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.969061] Freeing unused kernel memory: 656k freed [ 0.969677] Write protecting the kernel text: 4676k [ 0.969728] Write protecting the kernel read-only data: 1840k [ 0.991425] udev: starting version 151 [ 1.145791] usb 3-2: configuration #1 chosen from 1 choice [ 1.310098] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5 [ 1.310127] PCI: setting IRQ 5 as level-triggered [ 1.310134] b43-pci-bridge 0000:02:04.0: PCI INT A -> Link[LNKE] -> GSI 5 (level, low) -> IRQ 5 [ 1.319039] ssb: Sonics Silicon Backplane found on PCI device 0000:02:04.0 [ 1.319215] tg3.c:v3.102 (September 1, 2009) [ 1.319232] tg3 0000:02:05.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.392800] eth0: Tigon3 [partno(BCM95705A50) rev 3001] (PCI:33MHz:32-bit) MAC address 00:0f:1f:44:65:64 [ 1.392806] eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 1.392810] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.392814] eth0: dma_rwctrl[763f0000] dma_mask[64-bit] [ 1.392848] ohci1394 0000:02:03.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 1.450043] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[e0212000-e02127ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.570809] kjournald starting. Commit interval 5 seconds [ 1.570822] EXT3-fs: mounted filesystem with ordered data mode. [ 2.728198] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00065b4004fda55e] [ 26.174572] Adding 1084348k swap on /dev/sda5. Priority:-1 extents:1 across:1084348k [ 26.217165] udev[327]: starting version 162 [ 26.765795] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 27.087147] type=1505 audit(1282837305.269:2): operation="profile_load" pid=551 name="/sbin/dhclient3" [ 27.088073] type=1505 audit(1282837305.270:3): operation="profile_load" pid=551 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 27.088567] type=1505 audit(1282837305.270:4): operation="profile_load" pid=551 name="/usr/lib/connman/scripts/dhclient-script" [ 27.366939] dell-wmi: No known WMI GUID found [ 27.367389] Linux agpgart interface v0.103 [ 27.369899] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 27.377476] intel_rng: FWH not detected [ 27.422567] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 27.424408] acpi device:04: registered as cooling_device2 [ 27.425409] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6 [ 27.425586] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no) [ 27.460107] agpgart-intel 0000:00:00.0: Intel 855GM Chipset [ 27.460835] agpgart-intel 0000:00:00.0: detected 8060K stolen memory [ 27.464315] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe8000000 [ 27.813634] irda_init() [ 27.813655] NET: Registered protocol family 23 [ 27.877718] Bluetooth: Core ver 2.15 [ 27.879676] NET: Registered protocol family 31 [ 27.879680] Bluetooth: HCI device and connection manager initialized [ 27.879684] Bluetooth: HCI socket layer initialized [ 28.200242] EXT3 FS on sda1, internal journal [ 28.284572] [drm] Initialized drm 1.1.0 20060810 [ 28.289217] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [ 28.289288] nsc-ircc, chip->init [ 28.289297] nsc-ircc, Found chip at base=0x02e [ 28.289321] nsc-ircc, driver loaded (Dag Brattli) [ 28.289953] nsc_ircc_open(), can't get iobase of 0x2f8 [ 28.289980] nsc-ircc, Found chip at base=0x02e [ 28.290003] nsc-ircc, driver loaded (Dag Brattli) [ 28.290008] nsc_ircc_open(), can't get iobase of 0x2f8 [ 28.291370] nsc-ircc 00:06: disabled [ 28.293191] yenta_cardbus 0000:02:03.0: CardBus bridge found [1028:014f] [ 28.341830] cfg80211: Calling CRDA to update world regulatory domain [ 28.347220] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 28.348135] usbcore: registered new interface driver btusb [ 28.406410] cfg80211: World regulatory domain updated: [ 28.406415] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 28.406420] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.406424] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 28.406428] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 28.406432] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.406436] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.420563] yenta_cardbus 0000:02:03.0: ISA IRQ mask 0x0098, PCI irq 10 [ 28.420568] yenta_cardbus 0000:02:03.0: Socket status: 30000006 [ 28.420575] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06 [ 28.420588] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 28.420594] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean. [ 28.420892] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff [ 28.420897] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff [ 28.421206] yenta_cardbus 0000:02:03.1: CardBus bridge found [1028:014f] [ 28.505803] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa54ab1, caps: 0x804713/0x0 [ 28.541076] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 28.548559] yenta_cardbus 0000:02:03.1: ISA IRQ mask 0x0098, PCI irq 10 [ 28.548564] yenta_cardbus 0000:02:03.1: Socket status: 30000006 [ 28.548570] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #06 to #0a [ 28.548582] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 28.548587] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3000-0x3fff: clean. [ 28.548883] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff [ 28.548888] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff [ 29.037620] [drm] i915 disabling kernel modesetting for known bad device. [ 29.053494] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 29.053503] pci 0000:00:02.0: setting latency timer to 64 [ 29.075170] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 29.092678] type=1505 audit(1282837307.274:5): operation="profile_load" pid=719 name="/usr/share/gdm/guest-session/Xsession" [ 29.096267] type=1505 audit(1282837307.278:6): operation="profile_replace" pid=721 name="/sbin/dhclient3" [ 29.097189] type=1505 audit(1282837307.278:7): operation="profile_replace" pid=721 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 29.097686] type=1505 audit(1282837307.278:8): operation="profile_replace" pid=721 name="/usr/lib/connman/scripts/dhclient-script" [ 29.102882] type=1505 audit(1282837307.282:9): operation="profile_load" pid=722 name="/usr/bin/evince" [ 29.115074] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 29.115930] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 29.116357] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 29.116682] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 29.117177] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 29.119223] type=1505 audit(1282837307.298:10): operation="profile_load" pid=722 name="/usr/bin/evince-previewer" [ 29.126393] type=1505 audit(1282837307.306:11): operation="profile_load" pid=722 name="/usr/bin/evince-thumbnailer" [ 29.199730] tg3 0000:02:05.0: firmware: requesting tigon/tg3_tso5.bin [ 29.557195] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 29.659139] b43-phy0: Broadcom 4306 WLAN found (core revision 5) [ 29.809516] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. [ 29.810586] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 29.810975] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 29.811299] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 29.811788] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 29.870245] apm: BIOS not found.