[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-server (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 09:17:34 UTC 2010 (Ubuntu 2.6.32-21.32-server 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-21-server root=/dev/mapper/Mustrum-root ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable) [ 0.000000] BIOS-e820: 00000000cffa0000 - 00000000cffb0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cffb0000 - 00000000cfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcffa0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0E0000000 mask 0E0000000 uncachable [ 0.000000] 1 base 000000000 mask 000000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000cffa0000 (usable) [ 0.000000] modified: 00000000cffa0000 - 00000000cffb0000 (ACPI data) [ 0.000000] modified: 00000000cffb0000 - 00000000cfff0000 (ACPI NVS) [ 0.000000] modified: 00000000cfff0000 - 00000000e0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cffa0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cffa0000 page 4k [ 0.000000] kernel direct mapping tables up to cffa0000 @ 10000-16000 [ 0.000000] RAMDISK: 37748000 - 37fef91b [ 0.000000] ACPI: RSDP 00000000000fa1c0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000cffa0000 0003C (v01 082609 RSDT2310 20090826 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cffa0200 00084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cffa0450 06352 (v01 AS215 AS215156 00000156 INTL 20051117) [ 0.000000] ACPI: FACS 00000000cffb0000 00040 [ 0.000000] ACPI: APIC 00000000cffa0390 00080 (v01 082609 APIC2310 20090826 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cffa0410 0003C (v01 082609 OEMMCFG 20090826 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cffb0040 00078 (v01 082609 OEMB2310 20090826 MSFT 00000097) [ 0.000000] ACPI: AAFT 00000000cffaa450 00027 (v01 082609 OEMAAFT 20090826 MSFT 00000097) [ 0.000000] ACPI: NVHD 00000000cffb00c0 00284 (v01 082609 NVHDCP 20090826 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000cffa0000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000cffa0000 [ 0.000000] NODE_DATA [0000000000014000 - 0000000000018fff] [ 0.000000] bootmap [0000000000019000 - 0000000000032ff7] pages 1a [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00cffa0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a46ea4] TEXT DATA BSS ==> [0001000000 - 0001a46ea4] [ 0.000000] #3 [0037748000 - 0037fef91b] RAMDISK ==> [0037748000 - 0037fef91b] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0001a47000 - 0001a4717f] BRK ==> [0001a47000 - 0001a4717f] [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff880002000000-ffff880004dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cffa0 [ 0.000000] On node 0 totalpages: 851759 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3824 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11591 pages used for memmap [ 0.000000] DMA32 zone: 836185 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 840009 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-21-server root=/dev/mapper/Mustrum-root ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3339748k/3407488k available (5499k kernel code, 452k absent, 67288k reserved, 3081k data, 796k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 34078720 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1599.967 MHz processor. [ 0.020013] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.93 BogoMIPS (lpj=15999670) [ 0.020084] Security Framework initialized [ 0.020134] AppArmor: AppArmor initialized [ 0.021305] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.025109] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.031262] Mount-cache hash table entries: 256 [ 0.031622] Initializing cgroup subsys ns [ 0.031635] Initializing cgroup subsys cpuacct [ 0.031647] Initializing cgroup subsys memory [ 0.031666] Initializing cgroup subsys devices [ 0.031673] Initializing cgroup subsys freezer [ 0.031679] Initializing cgroup subsys net_cls [ 0.031728] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.031736] CPU: L2 cache: 512K [ 0.031744] CPU 0/0x0 -> Node 0 [ 0.031749] CPU: Physical Processor ID: 0 [ 0.031754] CPU: Processor Core ID: 0 [ 0.031762] mce: CPU supports 5 MCE banks [ 0.031777] CPU0: Thermal monitoring enabled (TM1) [ 0.031788] using mwait in idle threads. [ 0.031793] Performance Events: Atom events, Intel PMU driver. [ 0.031807] ... version: 3 [ 0.031812] ... bit width: 40 [ 0.031817] ... generic registers: 2 [ 0.031822] ... value mask: 000000ffffffffff [ 0.031827] ... max period: 000000007fffffff [ 0.031832] ... fixed-purpose events: 3 [ 0.031837] ... event mask: 0000000700000003 [ 0.036150] ACPI: Core revision 20090903 [ 0.055644] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.055658] ftrace: allocating 22808 entries in 90 pages [ 0.060150] Setting APIC routing to flat [ 0.060578] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.165466] CPU0: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02 [ 0.170000] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.030000] Initializing CPU#1 [ 0.030000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.030000] CPU: L2 cache: 512K [ 0.030000] CPU 1/0x2 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 1 [ 0.030000] CPU1: Thermal monitoring enabled (TM1) [ 0.320079] CPU1: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02 [ 0.320100] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.330245] Booting processor 2 APIC 0x1 ip 0x6000 [ 0.030000] Initializing CPU#2 [ 0.030000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.030000] CPU: L2 cache: 512K [ 0.030000] CPU 2/0x1 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 0 [ 0.030000] CPU2: Thermal monitoring enabled (TM1) [ 0.490093] CPU2: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02 [ 0.490114] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.500296] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.030000] Initializing CPU#3 [ 0.030000] CPU: L1 I cache: 32K, L1 D cache: 24K [ 0.030000] CPU: L2 cache: 512K [ 0.030000] CPU 3/0x3 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 1 [ 0.030000] CPU3: Thermal monitoring enabled (TM1) [ 0.660132] CPU3: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02 [ 0.660153] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.670031] Brought up 4 CPUs [ 0.670038] Total of 4 processors activated (12800.24 BogoMIPS). [ 0.671555] CPU0 attaching sched-domain: [ 0.671565] domain 0: span 0,2 level SIBLING [ 0.671572] groups: 0 (cpu_power = 589) 2 (cpu_power = 589) [ 0.671585] domain 1: span 0,2 level MC [ 0.671591] groups: 0,2 (cpu_power = 1178) [ 0.671601] domain 2: span 0-3 level CPU [ 0.671606] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 0.671625] CPU1 attaching sched-domain: [ 0.671630] domain 0: span 1,3 level SIBLING [ 0.671636] groups: 1 (cpu_power = 589) 3 (cpu_power = 589) [ 0.671648] domain 1: span 1,3 level MC [ 0.671654] groups: 1,3 (cpu_power = 1178) [ 0.671663] domain 2: span 0-3 level CPU [ 0.671669] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 0.671684] CPU2 attaching sched-domain: [ 0.671689] domain 0: span 0,2 level SIBLING [ 0.671694] groups: 2 (cpu_power = 589) 0 (cpu_power = 589) [ 0.671707] domain 1: span 0,2 level MC [ 0.671712] groups: 0,2 (cpu_power = 1178) [ 0.671722] domain 2: span 0-3 level CPU [ 0.671727] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178) [ 0.671742] CPU3 attaching sched-domain: [ 0.671747] domain 0: span 1,3 level SIBLING [ 0.671752] groups: 3 (cpu_power = 589) 1 (cpu_power = 589) [ 0.671765] domain 1: span 1,3 level MC [ 0.671770] groups: 1,3 (cpu_power = 1178) [ 0.671780] domain 2: span 0-3 level CPU [ 0.671785] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178) [ 0.672217] devtmpfs: initialized [ 0.680444] regulator: core version 0.5 [ 0.680444] Time: 7:23:58 Date: 08/06/10 [ 0.680444] NET: Registered protocol family 16 [ 0.680603] ACPI: bus type pci registered [ 0.680762] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31 [ 0.680769] PCI: Not using MMCONFIG. [ 0.680774] PCI: Using configuration type 1 for base access [ 0.682848] Trying to unpack rootfs image as initramfs... [ 0.682885] bio: create slab at 0 [ 0.682885] ACPI: EC: Look up EC in DSDT [ 0.699501] ACPI: Executed 1 blocks of module-level executable AML code [ 0.714208] ACPI: Interpreter enabled [ 0.714221] ACPI: (supports S0 S1 S3 S4 S5) [ 0.714287] ACPI: Using IOAPIC for interrupt routing [ 0.714437] PCI: MCFG configuration 0: base fc000000 segment 0 buses 0 - 31 [ 0.726215] PCI: MCFG area at fc000000 reserved in ACPI motherboard resources [ 0.727728] PCI: Using MMCONFIG at fc000000 - fdffffff [ 0.761082] ACPI: No dock devices found. [ 0.762216] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.762584] pci 0000:00:03.0: reg 10 io port: [0x4f00-0x4fff] [ 0.762732] pci 0000:00:03.2: reg 10 io port: [0x4900-0x493f] [ 0.762755] pci 0000:00:03.2: reg 20 io port: [0x4d00-0x4d3f] [ 0.762765] pci 0000:00:03.2: reg 24 io port: [0x4e00-0x4e3f] [ 0.762799] pci 0000:00:03.2: PME# supported from D3hot D3cold [ 0.762809] pci 0000:00:03.2: PME# disabled [ 0.762970] pci 0000:00:03.5: reg 10 32bit mmio: [0xfae80000-0xfaefffff] [ 0.763089] pci 0000:00:04.0: reg 10 32bit mmio: [0xfae7f000-0xfae7ffff] [ 0.763135] pci 0000:00:04.0: supports D1 D2 [ 0.763140] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.763148] pci 0000:00:04.0: PME# disabled [ 0.763194] pci 0000:00:04.1: reg 10 32bit mmio: [0xfae7ec00-0xfae7ecff] [ 0.763250] pci 0000:00:04.1: supports D1 D2 [ 0.763255] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.763263] pci 0000:00:04.1: PME# disabled [ 0.763331] pci 0000:00:08.0: reg 10 32bit mmio: [0xfae78000-0xfae7bfff] [ 0.763380] pci 0000:00:08.0: PME# supported from D3hot D3cold [ 0.763387] pci 0000:00:08.0: PME# disabled [ 0.763482] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfae7d000-0xfae7dfff] [ 0.763492] pci 0000:00:0a.0: reg 14 io port: [0xd080-0xd087] [ 0.763503] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfae7e800-0xfae7e8ff] [ 0.763513] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfae7e400-0xfae7e40f] [ 0.763548] pci 0000:00:0a.0: supports D1 D2 [ 0.763553] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.763561] pci 0000:00:0a.0: PME# disabled [ 0.763608] pci 0000:00:0b.0: reg 10 io port: [0xd000-0xd007] [ 0.763618] pci 0000:00:0b.0: reg 14 io port: [0xcc00-0xcc03] [ 0.763627] pci 0000:00:0b.0: reg 18 io port: [0xc880-0xc887] [ 0.763637] pci 0000:00:0b.0: reg 1c io port: [0xc800-0xc803] [ 0.763647] pci 0000:00:0b.0: reg 20 io port: [0xc480-0xc48f] [ 0.763657] pci 0000:00:0b.0: reg 24 32bit mmio: [0xfae76000-0xfae77fff] [ 0.763767] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.763774] pci 0000:00:10.0: PME# disabled [ 0.763880] pci 0000:00:09.0: transparent bridge [ 0.763938] pci 0000:01:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] [ 0.763954] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.763970] pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xf8000000-0xf9ffffff] [ 0.763981] pci 0000:01:00.0: reg 24 io port: [0xec00-0xec7f] [ 0.763991] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfafe0000-0xfaffffff] [ 0.764073] pci 0000:00:10.0: bridge io port: [0xe000-0xefff] [ 0.764080] pci 0000:00:10.0: bridge 32bit mmio: [0xfaf00000-0xfbffffff] [ 0.764090] pci 0000:00:10.0: bridge 64bit mmio pref: [0xe0000000-0xf9ffffff] [ 0.764115] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.764576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] [ 0.784907] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.785573] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled. [ 0.786225] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. [ 0.786872] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.787522] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *0, disabled. [ 0.788179] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. [ 0.788827] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. [ 0.789472] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. [ 0.790139] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. [ 0.790800] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. [ 0.791448] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. [ 0.792094] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. [ 0.792744] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled. [ 0.793390] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. [ 0.794037] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. [ 0.794684] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. [ 0.795330] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled. [ 0.795975] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. [ 0.796627] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. [ 0.797272] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. [ 0.797930] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled. [ 0.798578] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. [ 0.799225] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. [ 0.799874] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. [ 0.800556] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. [ 0.801203] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. [ 0.801854] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. [ 0.802505] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. [ 0.803160] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. [ 0.803815] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. [ 0.804479] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. [ 0.805140] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. [ 0.805800] ACPI: PCI Interrupt Link [LUB0] (IRQs 16) *15 [ 0.806467] ACPI: PCI Interrupt Link [LUB2] (IRQs 18) *14 [ 0.807127] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 [ 0.807783] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *7 [ 0.808449] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10 [ 0.809115] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.809777] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *9 [ 0.810470] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 [ 0.811225] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.811877] ACPI: PCI Interrupt Link [UB11] (IRQs 17) *0, disabled. [ 0.812521] ACPI: PCI Interrupt Link [UB12] (IRQs 19) *0, disabled. [ 0.813165] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *0, disabled. [ 0.813815] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled. [ 0.814464] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled. [ 0.815115] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *0, disabled. [ 0.815765] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *0, disabled. [ 0.816416] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *0, disabled. [ 0.817068] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *0, disabled. [ 0.817392] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.817400] vgaarb: loaded [ 0.817709] SCSI subsystem initialized [ 0.817828] libata version 3.00 loaded. [ 0.817828] usbcore: registered new interface driver usbfs [ 0.817828] usbcore: registered new interface driver hub [ 0.817828] usbcore: registered new device driver usb [ 0.817828] ACPI: WMI: Mapper loaded [ 0.817828] PCI: Using ACPI for IRQ routing [ 0.817828] NetLabel: Initializing [ 0.817828] NetLabel: domain hash size = 128 [ 0.817828] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.817828] NetLabel: unlabeled traffic allowed by default [ 0.817828] Switching to clocksource tsc [ 0.825009] AppArmor: AppArmor Filesystem Enabled [ 0.825063] pnp: PnP ACPI init [ 0.825111] ACPI: bus type pnp registered [ 0.837788] pnp: PnP ACPI: found 9 devices [ 0.837795] ACPI: ACPI bus type pnp unregistered [ 0.837836] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.837844] system 00:04: ioport range 0x800-0x80f has been reserved [ 0.837851] system 00:04: ioport range 0x4000-0x407f has been reserved [ 0.837859] system 00:04: ioport range 0x4080-0x40ff has been reserved [ 0.837867] system 00:04: ioport range 0x4400-0x447f has been reserved [ 0.837874] system 00:04: ioport range 0x4480-0x44ff has been reserved [ 0.837882] system 00:04: ioport range 0x4800-0x487f has been reserved [ 0.837889] system 00:04: ioport range 0x4880-0x48ff has been reserved [ 0.837899] system 00:04: iomem range 0xfefe2000-0xfefe3fff has been reserved [ 0.837907] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been reserved [ 0.837915] system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.837934] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.837942] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.837958] system 00:07: iomem range 0xfc000000-0xfdffffff has been reserved [ 0.837975] system 00:08: iomem range 0x0-0x9ffff could not be reserved [ 0.837983] system 00:08: iomem range 0xc0000-0xcffff has been reserved [ 0.837990] system 00:08: iomem range 0xe0000-0xfffff could not be reserved [ 0.837998] system 00:08: iomem range 0x100000-0xdfffffff could not be reserved [ 0.838006] system 00:08: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.843136] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 [ 0.843142] pci 0000:00:09.0: IO window: disabled [ 0.843150] pci 0000:00:09.0: MEM window: disabled [ 0.843157] pci 0000:00:09.0: PREFETCH window: disabled [ 0.843167] pci 0000:00:10.0: PCI bridge, secondary bus 0000:01 [ 0.843174] pci 0000:00:10.0: IO window: 0xe000-0xefff [ 0.843182] pci 0000:00:10.0: MEM window: 0xfaf00000-0xfbffffff [ 0.843191] pci 0000:00:10.0: PREFETCH window: 0x000000e0000000-0x000000f9ffffff [ 0.843212] pci 0000:00:09.0: setting latency timer to 64 [ 0.843226] pci 0000:00:10.0: setting latency timer to 64 [ 0.843235] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.843242] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.843250] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.843256] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.843263] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.843270] pci_bus 0000:01: resource 1 mem: [0xfaf00000-0xfbffffff] [ 0.843276] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xf9ffffff] [ 0.843376] NET: Registered protocol family 2 [ 0.843838] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.847483] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.854441] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.855250] TCP: Hash tables configured (established 524288 bind 65536) [ 0.855258] TCP reno registered [ 0.855541] NET: Registered protocol family 1 [ 0.900098] pci 0000:01:00.0: Boot video device [ 0.900940] Scanning for low memory corruption every 60 seconds [ 0.901267] audit: initializing netlink socket (disabled) [ 0.901294] type=2000 audit(1281079437.899:1): initialized [ 0.918263] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.922156] VFS: Disk quotas dquot_6.5.2 [ 0.922313] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.924034] fuse init (API version 7.13) [ 0.924293] msgmni has been set to 6522 [ 0.925084] alg: No test for stdrng (krng) [ 0.925263] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.925271] io scheduler noop registered [ 0.925276] io scheduler anticipatory registered [ 0.925281] io scheduler deadline registered (default) [ 0.925386] io scheduler cfq registered [ 0.925658] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.925720] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.925960] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.925970] ACPI: Power Button [PWRB] [ 0.926116] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.926123] ACPI: Power Button [PWRF] [ 0.927016] processor LNXCPU:00: registered as cooling_device0 [ 0.927127] processor LNXCPU:01: registered as cooling_device1 [ 0.927234] processor LNXCPU:02: registered as cooling_device2 [ 0.927344] processor LNXCPU:03: registered as cooling_device3 [ 0.943824] Linux agpgart interface v0.103 [ 0.943925] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.947233] brd: module loaded [ 0.948582] loop: module loaded [ 0.948868] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.950371] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 0.950384] alloc irq_desc for 23 on node -1 [ 0.950389] alloc kstat_irqs on node -1 [ 0.950406] pata_acpi 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 0.950468] pata_acpi 0000:00:0b.0: setting latency timer to 64 [ 0.950497] pata_acpi 0000:00:0b.0: PCI INT A disabled [ 0.951325] Fixed MDIO Bus: probed [ 0.951422] PPP generic driver version 2.4.2 [ 0.951564] tun: Universal TUN/TAP device driver, 1.6 [ 0.951569] tun: (C) 1999-2004 Max Krasnyansky [ 0.951857] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.952852] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 18 [ 0.952863] alloc irq_desc for 18 on node -1 [ 0.952868] alloc kstat_irqs on node -1 [ 0.952886] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 18 (level, low) -> IRQ 18 [ 0.952928] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.952935] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.953053] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 [ 0.953105] ehci_hcd 0000:00:04.1: debug port 1 [ 0.953119] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported [ 0.953157] ehci_hcd 0000:00:04.1: irq 18, io mem 0xfae7ec00 [ 0.970004] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.970285] usb usb1: configuration #1 chosen from 1 choice [ 0.970364] hub 1-0:1.0: USB hub found [ 0.970385] hub 1-0:1.0: 6 ports detected [ 0.970529] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.971530] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 16 [ 0.971540] alloc irq_desc for 16 on node -1 [ 0.971546] alloc kstat_irqs on node -1 [ 0.971560] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 16 (level, low) -> IRQ 16 [ 0.971595] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.971602] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.971725] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 0.971792] ohci_hcd 0000:00:04.0: irq 16, io mem 0xfae7f000 [ 1.032226] usb usb2: configuration #1 chosen from 1 choice [ 1.032302] hub 2-0:1.0: USB hub found [ 1.032325] hub 2-0:1.0: 6 ports detected [ 1.032466] uhci_hcd: USB Universal Host Controller Interface driver [ 1.032653] PNP: No PS/2 controller found. Probing ports directly. [ 1.034145] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.034163] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.034476] mice: PS/2 mouse device common for all mice [ 1.034751] rtc_cmos 00:05: RTC can wake from S4 [ 1.034886] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.034947] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 1.035300] device-mapper: uevent: version 1.0.3 [ 1.035624] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.036032] device-mapper: multipath: version 1.1.0 loaded [ 1.036043] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.036820] cpuidle: using governor ladder [ 1.036827] cpuidle: using governor menu [ 1.037755] TCP cubic registered [ 1.038099] NET: Registered protocol family 10 [ 1.039202] lo: Disabled Privacy Extensions [ 1.039879] NET: Registered protocol family 17 [ 1.040351] PM: Resume from disk failed. [ 1.040382] registered taskstats version 1 [ 1.040805] Magic number: 6:26:369 [ 1.040990] rtc_cmos 00:05: setting system clock to 2010-08-06 07:23:58 UTC (1281079438) [ 1.040999] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.041004] EDD information not available. [ 1.143243] Freeing initrd memory: 8862k freed [ 1.151050] Freeing unused kernel memory: 796k freed [ 1.151529] Write protecting the kernel read-only data: 7788k [ 1.198259] udev: starting version 151 [ 1.349739] ahci 0000:00:0b.0: version 3.0 [ 1.349780] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 1.349891] alloc irq_desc for 24 on node -1 [ 1.349899] alloc kstat_irqs on node -1 [ 1.349927] ahci 0000:00:0b.0: irq 24 for MSI/MSI-X [ 1.350127] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode [ 1.350141] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part sxs [ 1.350155] ahci 0000:00:0b.0: setting latency timer to 64 [ 1.364166] scsi0 : ahci [ 1.369547] scsi1 : ahci [ 1.370513] scsi2 : ahci [ 1.370821] scsi3 : ahci [ 1.371096] scsi4 : ahci [ 1.371351] scsi5 : ahci [ 1.372096] ata1: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76100 irq 24 [ 1.372111] ata2: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76180 irq 24 [ 1.372122] ata3: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76200 irq 24 [ 1.372133] ata4: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76280 irq 24 [ 1.372144] ata5: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76300 irq 24 [ 1.372155] ata6: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76380 irq 24 [ 1.372269] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.373510] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 1.373526] alloc irq_desc for 22 on node -1 [ 1.373532] alloc kstat_irqs on node -1 [ 1.373549] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 1.373561] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.452266] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 90:e6:ba:97:4a:6e [ 1.452276] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3 [ 1.570182] usb 2-6: new low speed USB device using ohci_hcd and address 2 [ 1.700302] ata6: SATA link down (SStatus 0 SControl 300) [ 1.710041] ata3: SATA link down (SStatus 0 SControl 300) [ 1.710088] ata4: SATA link down (SStatus 0 SControl 300) [ 1.710141] ata5: SATA link down (SStatus 0 SControl 300) [ 1.794270] usb 2-6: configuration #1 chosen from 1 choice [ 1.824797] usbcore: registered new interface driver hiddev [ 1.835595] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:04.0/usb2/2-6/2-6:1.0/input/input3 [ 1.835811] generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:04.0-6/input0 [ 1.853353] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:04.0/usb2/2-6/2-6:1.1/input/input4 [ 1.853568] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:04.0-6/input1 [ 1.853633] usbcore: registered new interface driver usbhid [ 1.853641] usbhid: v2.6:USB HID core driver [ 1.880043] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.883794] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.884273] ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, AS02, max UDMA/100, ATAPI AN [ 1.884709] ata1.00: ATA-8: WDC WD3200BEKT-00A25T0, 01.01A01, max UDMA/133 [ 1.884717] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.885784] ata1.00: configured for UDMA/133 [ 1.886029] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-0 01.0 PQ: 0 ANSI: 5 [ 1.886633] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.886712] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.886928] sd 0:0:0:0: [sda] Write Protect is off [ 1.886936] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.887030] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.887545] sda: [ 1.888307] ata2.00: configured for UDMA/100 [ 1.891630] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N AS02 PQ: 0 ANSI: 5 [ 1.899823] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.899832] Uniform CD-ROM driver Revision: 3.20 [ 1.900137] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.900306] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.920637] sda1 sda2 < sda5 > [ 1.929215] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.881932] EXT4-fs (dm-0): mounted filesystem with ordered data mode [ 6.477973] udev: starting version 151 [ 6.504883] Adding 9814008k swap on /dev/mapper/Mustrum-swap_1. Priority:-1 extents:1 across:9814008k [ 6.514432] lp: driver loaded but no devices found [ 6.632427] i2c i2c-0: nForce2 SMBus adapter at 0x4d00 [ 6.632445] ACPI: resource nForce2_smbus [0x4e00-0x4e3f] conflicts with ACPI region SM00 [0x004e00-0x004e3f] [ 6.632455] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.632465] nForce2_smbus 0000:00:03.2: Error probing SMB2. [ 6.708427] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.869779] [drm] Initialized drm 1.1.0 20060810 [ 7.075457] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21 [ 7.075475] alloc irq_desc for 21 on node -1 [ 7.075482] alloc kstat_irqs on node -1 [ 7.075504] nouveau 0000:01:00.0: PCI INT A -> Link[SGRU] -> GSI 21 (level, low) -> IRQ 21 [ 7.075519] nouveau 0000:01:00.0: setting latency timer to 64 [ 7.079360] type=1505 audit(1281079444.530:2): operation="profile_load" pid=583 name="/sbin/dhclient3" [ 7.079939] type=1505 audit(1281079444.530:3): operation="profile_load" pid=583 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 7.080267] type=1505 audit(1281079444.530:4): operation="profile_load" pid=583 name="/usr/lib/connman/scripts/dhclient-script" [ 7.081304] [drm] nouveau 0000:01:00.0: failed to evaluate _DSM: 5 [ 7.082321] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0ace80b1) [ 7.084384] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 7.090619] HDA Intel 0000:00:08.0: power state changed by ACPI to D0 [ 7.091991] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 [ 7.092006] alloc irq_desc for 20 on node -1 [ 7.092012] alloc kstat_irqs on node -1 [ 7.092029] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20 [ 7.092039] hda_intel: Disable MSI for Nvidia chipset [ 7.092141] HDA Intel 0000:00:08.0: setting latency timer to 64 [ 7.155501] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 7.155519] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 7.155529] [drm] nouveau 0000:01:00.0: Bios version 62.79.5f.00 [ 7.155541] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [ 7.155552] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 7.155563] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [ 7.155573] [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff [ 7.155582] [drm] nouveau 0000:01:00.0: 1: 0x00001161: type 0x61 idx 1 tag 0x07 [ 7.155591] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 0000001e [ 7.155601] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011332 00020010 [ 7.155610] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 0000000e 00000000 [ 7.164973] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDEBA [ 7.281444] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE17C [ 7.281453] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE17E [ 7.281470] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE23F [ 7.281487] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE304 [ 7.281494] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE369 [ 7.311293] [drm] nouveau 0000:01:00.0: 0xE369: Condition still not met after 20ms, skipping following opcodes [ 7.311311] [drm] nouveau 0000:01:00.0: 0xC822: parsing output script 0 [ 7.415228] [TTM] Zone kernel: Available graphics memory: 1674704 kiB. [ 7.415255] [drm] nouveau 0000:01:00.0: 256 MiB VRAM [ 7.445142] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 7.445161] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 7.445482] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 7.450957] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 7.451876] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 7.451885] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 7.451893] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 7.452032] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector [ 7.581241] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x40250000, bo ffff8800c9f72600 [ 7.581481] fb0: nouveaufb frame buffer device [ 7.581488] registered panic notifier [ 7.581506] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 7.586928] vga16fb: initializing [ 7.586941] vga16fb: mapped to 0xffff8800000a0000 [ 7.586955] vga16fb: not registering due to another framebuffer present [ 7.609763] [drm] nouveau 0000:01:00.0: 0x1191: parsing clock script 0 [ 7.610959] Console: switching to colour frame buffer device 160x64 [ 7.827652] type=1505 audit(1281079445.280:5): operation="profile_replace" pid=744 name="/sbin/dhclient3" [ 7.828238] type=1505 audit(1281079445.280:6): operation="profile_replace" pid=744 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 7.828575] type=1505 audit(1281079445.280:7): operation="profile_replace" pid=744 name="/usr/lib/connman/scripts/dhclient-script" [ 7.832590] type=1505 audit(1281079445.290:8): operation="profile_load" pid=745 name="/usr/sbin/mysqld" [ 7.836692] type=1505 audit(1281079445.290:9): operation="profile_load" pid=746 name="/usr/sbin/named" [ 7.840745] type=1505 audit(1281079445.290:10): operation="profile_load" pid=747 name="/usr/sbin/tcpdump" [ 10.159461] ata1.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x0 [ 10.159503] ata1.00: irq_stat 0x40000001 [ 10.159522] ata1.00: failed command: READ FPDMA QUEUED [ 10.159549] ata1.00: cmd 60/08:00:58:b2:88/00:00:03:00:00/40 tag 0 ncq 4096 in [ 10.159552] res 41/01:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 10.159592] ata1.00: status: { DRDY ERR } [ 10.159609] ata1.00: failed command: READ FPDMA QUEUED [ 10.159636] ata1.00: cmd 60/08:08:f0:bf:4b/00:00:20:00:00/40 tag 1 ncq 4096 in [ 10.159639] res 41/01:00:f0:bf:4b/00:00:20:00:00/40 Emask 0x401 (device error) [ 10.159680] ata1.00: status: { DRDY ERR } [ 10.159696] ata1.00: failed command: READ FPDMA QUEUED [ 10.159725] ata1.00: cmd 60/08:10:88:a9:07/00:00:04:00:00/40 tag 2 ncq 4096 in [ 10.159728] res 41/01:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 10.159766] ata1.00: status: { DRDY ERR } [ 10.159783] ata1.00: failed command: READ FPDMA QUEUED [ 10.159809] ata1.00: cmd 60/08:18:90:a9:47/00:00:05:00:00/40 tag 3 ncq 4096 in [ 10.159812] res 41/01:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 10.159851] ata1.00: status: { DRDY ERR } [ 10.163053] ata1.00: configured for UDMA/133 [ 10.163082] ata1: EH complete [ 10.302038] type=1505 audit(1281079447.759:11): operation="profile_replace" pid=787 name="/usr/sbin/mysqld" [ 12.542800] ata1.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x0 [ 12.542843] ata1.00: irq_stat 0x40000001 [ 12.542862] ata1.00: failed command: READ FPDMA QUEUED [ 12.542889] ata1.00: cmd 60/08:00:20:be:4b/00:00:05:00:00/40 tag 0 ncq 4096 in [ 12.542892] res 41/01:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 12.542932] ata1.00: status: { DRDY ERR } [ 12.542949] ata1.00: failed command: READ FPDMA QUEUED [ 12.542975] ata1.00: cmd 60/18:08:38:ce:cb/00:00:03:00:00/40 tag 1 ncq 12288 in [ 12.542978] res 41/01:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 12.543016] ata1.00: status: { DRDY ERR } [ 12.543033] ata1.00: failed command: READ FPDMA QUEUED [ 12.543059] ata1.00: cmd 60/08:10:f0:bf:4b/00:00:20:00:00/40 tag 2 ncq 4096 in [ 12.543063] res 41/01:00:f0:bf:4b/00:00:20:00:00/40 Emask 0x401 (device error) [ 12.543102] ata1.00: status: { DRDY ERR } [ 12.543119] ata1.00: failed command: WRITE FPDMA QUEUED [ 12.543145] ata1.00: cmd 61/08:18:80:a9:0b/00:00:12:00:00/40 tag 3 ncq 4096 out [ 12.543148] res 41/01:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error) [ 12.543186] ata1.00: status: { DRDY ERR } [ 12.546554] ata1.00: configured for UDMA/133 [ 12.546583] ata1: EH complete [ 14.926175] ata1.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0 [ 14.926217] ata1.00: irq_stat 0x40000008 [ 14.926236] ata1.00: failed command: READ FPDMA QUEUED [ 14.926263] ata1.00: cmd 60/08:08:f0:bf:4b/00:00:20:00:00/40 tag 1 ncq 4096 in [ 14.926267] res 41/01:00:f0:bf:4b/00:00:20:00:00/40 Emask 0x401 (device error) [ 14.926307] ata1.00: status: { DRDY ERR } [ 14.930064] ata1.00: configured for UDMA/133 [ 14.930086] ata1: EH complete [ 17.267881] ata1.00: NCQ disabled due to excessive errors [ 17.267893] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [ 17.267933] ata1.00: irq_stat 0x40000008 [ 17.267951] ata1.00: failed command: READ FPDMA QUEUED [ 17.267979] ata1.00: cmd 60/08:00:f0:bf:4b/00:00:20:00:00/40 tag 0 ncq 4096 in [ 17.267982] res 41/01:00:f0:bf:4b/00:00:20:00:00/40 Emask 0x401 (device error) [ 17.268023] ata1.00: status: { DRDY ERR } [ 17.271467] ata1.00: configured for UDMA/133 [ 17.271488] ata1: EH complete [ 17.600023] eth0: no IPv6 routers present [ 19.441849] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 19.441890] ata1.00: irq_stat 0x40000001 [ 19.441910] ata1.00: failed command: READ DMA EXT [ 19.441936] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 19.441940] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 19.441978] ata1.00: status: { DRDY ERR } [ 19.445564] ata1.00: configured for UDMA/133 [ 19.445586] ata1: EH complete [ 21.650156] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 21.650200] ata1.00: irq_stat 0x40000001 [ 21.650219] ata1.00: failed command: READ DMA EXT [ 21.650246] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 21.650249] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 21.651053] ata1.00: status: { DRDY ERR } [ 21.654893] ata1.00: configured for UDMA/133 [ 21.654919] sd 0:0:0:0: [sda] Unhandled sense code [ 21.654925] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 21.654933] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 21.654944] Descriptor sense data with sense descriptors (in hex): [ 21.654950] 72 03 13 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 21.654972] 20 4b bf f0 [ 21.654982] sd 0:0:0:0: [sda] Add. Sense: Address mark not found for data field [ 21.654993] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 20 4b bf f0 00 00 08 00 [ 21.655014] end_request: I/O error, dev sda, sector 541835248 [ 21.655870] ata1: EH complete [ 23.858456] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 23.859268] ata1.00: irq_stat 0x40000001 [ 23.860117] ata1.00: failed command: READ DMA EXT [ 23.860915] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 23.860918] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 23.862509] ata1.00: status: { DRDY ERR } [ 23.866342] ata1.00: configured for UDMA/133 [ 23.866370] ata1: EH complete [ 26.066784] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 26.067611] ata1.00: irq_stat 0x40000001 [ 26.068394] ata1.00: failed command: READ DMA EXT [ 26.069188] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 26.069191] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 26.070823] ata1.00: status: { DRDY ERR } [ 26.074676] ata1.00: configured for UDMA/133 [ 26.074703] ata1: EH complete [ 28.292084] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 28.292898] ata1.00: irq_stat 0x40000001 [ 28.293690] ata1.00: failed command: READ DMA EXT [ 28.294489] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 28.294492] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 28.296063] ata1.00: status: { DRDY ERR } [ 28.299866] ata1.00: configured for UDMA/133 [ 28.299894] ata1: EH complete [ 30.508385] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 30.509203] ata1.00: irq_stat 0x40000001 [ 30.509996] ata1.00: failed command: READ DMA EXT [ 30.510832] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 30.510836] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 30.512422] ata1.00: status: { DRDY ERR } [ 30.516239] ata1.00: configured for UDMA/133 [ 30.516267] ata1: EH complete [ 32.716719] ata1: limiting SATA link speed to 1.5 Gbps [ 32.716731] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 32.717540] ata1.00: irq_stat 0x40000001 [ 32.718322] ata1.00: failed command: READ DMA EXT [ 32.719115] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 32.719118] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 32.720713] ata1.00: status: { DRDY ERR } [ 32.721516] ata1: hard resetting link [ 33.250033] ata1: SATA link up (SStatus 103 SControl 310) [ 33.252732] ata1.00: configured for UDMA/133 [ 33.252759] ata1: EH complete [ 35.442559] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 35.443368] ata1.00: irq_stat 0x40000001 [ 35.444157] ata1.00: failed command: READ DMA EXT [ 35.444951] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 35.444954] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 35.446513] ata1.00: status: { DRDY ERR } [ 35.450288] ata1.00: configured for UDMA/133 [ 35.450319] sd 0:0:0:0: [sda] Unhandled sense code [ 35.450325] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 35.450333] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 35.450344] Descriptor sense data with sense descriptors (in hex): [ 35.450349] 72 03 13 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 35.450372] 20 4b bf f0 [ 35.450382] sd 0:0:0:0: [sda] Add. Sense: Address mark not found for data field [ 35.450393] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 20 4b bf f0 00 00 08 00 [ 35.450414] end_request: I/O error, dev sda, sector 541835248 [ 35.451265] ata1: EH complete [ 905.764425] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 905.764457] ata1.00: irq_stat 0x40000001 [ 905.764477] ata1.00: failed command: READ DMA EXT [ 905.764504] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 905.764507] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 905.764547] ata1.00: status: { DRDY ERR } [ 905.767231] ata1.00: configured for UDMA/133 [ 905.767254] ata1: EH complete [ 907.947715] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 907.947746] ata1.00: irq_stat 0x40000001 [ 907.947765] ata1.00: failed command: READ DMA EXT [ 907.947792] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 907.947795] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 907.947835] ata1.00: status: { DRDY ERR } [ 907.950498] ata1.00: configured for UDMA/133 [ 907.950525] ata1: EH complete [ 910.148007] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 910.148039] ata1.00: irq_stat 0x40000001 [ 910.148058] ata1.00: failed command: READ DMA EXT [ 910.148085] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 910.148089] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 910.148128] ata1.00: status: { DRDY ERR } [ 910.150796] ata1.00: configured for UDMA/133 [ 910.150823] ata1: EH complete [ 912.348268] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 912.348298] ata1.00: irq_stat 0x40000001 [ 912.348318] ata1.00: failed command: READ DMA EXT [ 912.348344] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 912.348348] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 912.348387] ata1.00: status: { DRDY ERR } [ 912.351016] ata1.00: configured for UDMA/133 [ 912.351044] ata1: EH complete [ 914.547574] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 914.547604] ata1.00: irq_stat 0x40000001 [ 914.547624] ata1.00: failed command: READ DMA EXT [ 914.547650] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 914.547654] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 914.547693] ata1.00: status: { DRDY ERR } [ 914.550466] ata1.00: configured for UDMA/133 [ 914.550493] ata1: EH complete [ 916.747864] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 916.747895] ata1.00: irq_stat 0x40000001 [ 916.747914] ata1.00: failed command: READ DMA EXT [ 916.747941] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 916.747944] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 916.747984] ata1.00: status: { DRDY ERR } [ 916.750611] ata1.00: configured for UDMA/133 [ 916.750641] sd 0:0:0:0: [sda] Unhandled sense code [ 916.750647] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 916.750655] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 916.750666] Descriptor sense data with sense descriptors (in hex): [ 916.750672] 72 03 13 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 916.750694] 20 4b bf f0 [ 916.750704] sd 0:0:0:0: [sda] Add. Sense: Address mark not found for data field [ 916.750715] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 20 4b bf f0 00 00 08 00 [ 916.750736] end_request: I/O error, dev sda, sector 541835248 [ 916.750813] ata1: EH complete [ 918.973195] ata1.00: limiting speed to UDMA/100:PIO4 [ 918.973206] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 918.973236] ata1.00: irq_stat 0x40000001 [ 918.973255] ata1.00: failed command: READ DMA EXT [ 918.973281] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 918.973285] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 918.973325] ata1.00: status: { DRDY ERR } [ 918.974068] ata1: hard resetting link [ 919.500043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 919.502628] ata1.00: configured for UDMA/100 [ 919.502657] ata1: EH complete [ 921.690038] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 921.690809] ata1.00: irq_stat 0x40000001 [ 921.691557] ata1.00: failed command: READ DMA EXT [ 921.692313] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 921.692317] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 921.693830] ata1.00: status: { DRDY ERR } [ 921.698262] ata1.00: configured for UDMA/100 [ 921.698289] ata1: EH complete [ 923.881302] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 923.882072] ata1.00: irq_stat 0x40000001 [ 923.882824] ata1.00: failed command: READ DMA EXT [ 923.883590] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 923.883594] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 923.885107] ata1.00: status: { DRDY ERR } [ 923.889540] ata1.00: configured for UDMA/100 [ 923.889568] ata1: EH complete [ 926.073607] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 926.074405] ata1.00: irq_stat 0x40000001 [ 926.075173] ata1.00: failed command: READ DMA EXT [ 926.075947] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 926.075950] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 926.077453] ata1.00: status: { DRDY ERR } [ 926.081242] ata1.00: configured for UDMA/100 [ 926.081274] ata1: EH complete [ 928.281890] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 928.282674] ata1.00: irq_stat 0x40000001 [ 928.283437] ata1.00: failed command: READ DMA EXT [ 928.284202] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 928.284205] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 928.285711] ata1.00: status: { DRDY ERR } [ 928.289498] ata1.00: configured for UDMA/100 [ 928.289525] ata1: EH complete [ 930.490188] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 [ 930.490969] ata1.00: irq_stat 0x40000001 [ 930.491722] ata1.00: failed command: READ DMA EXT [ 930.492470] ata1.00: cmd 25/00:08:f0:bf:4b/00:00:20:00:00/e0 tag 0 dma 4096 in [ 930.492474] res 51/01:00:f0:bf:4b/00:00:20:00:00/e0 Emask 0x1 (device error) [ 930.493980] ata1.00: status: { DRDY ERR } [ 930.497757] ata1.00: configured for UDMA/100 [ 930.497787] sd 0:0:0:0: [sda] Unhandled sense code [ 930.497793] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 930.497801] sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] [ 930.497812] Descriptor sense data with sense descriptors (in hex): [ 930.497818] 72 03 13 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 930.497840] 20 4b bf f0 [ 930.497850] sd 0:0:0:0: [sda] Add. Sense: Address mark not found for data field [ 930.497861] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 20 4b bf f0 00 00 08 00 [ 930.497882] end_request: I/O error, dev sda, sector 541835248 [ 930.498707] ata1: EH complete