[ 28.872342] ppdev: user-space parallel port driver [ 28.981516] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 28.981519] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 28.981955] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 29.152451] type=1400 audit(1279558716.431:14): operation="getattr" pid=1135 parent=921 profile="/sbin/dhclient3" name="/lib/" pid=1135 comm="dhclient" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 29.280889] e1000e: eth0 NIC Link is Down [ 30.843136] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 30.843140] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 30.844236] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 30.844239] vboxdrv: Successfully done. [ 30.844240] vboxdrv: Found 4 processor cores. [ 30.844348] VBoxDrv: dbg - g_abExecMemory=ffffffffa0d2eda0 [ 30.844402] vboxdrv: fAsync=0 offMin=0x44a offMax=0x16da [ 30.844469] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 30.844471] vboxdrv: Successfully loaded version 3.2.6 (interface 0x00140001). [ 31.081829] vboxnetflt: no symbol version for RTSemFastMutexCreate [ 31.081833] vboxnetflt: Unknown symbol RTSemFastMutexCreate (err -22) [ 31.081926] vboxnetflt: no symbol version for RTR0Init [ 31.081928] vboxnetflt: Unknown symbol RTR0Init (err -22) [ 31.082118] vboxnetflt: no symbol version for SUPDrvLinuxIDC [ 31.082121] vboxnetflt: Unknown symbol SUPDrvLinuxIDC (err -22) [ 31.082214] vboxnetflt: no symbol version for RTSemEventDestroy [ 31.082216] vboxnetflt: Unknown symbol RTSemEventDestroy (err -22) [ 31.082278] vboxnetflt: no symbol version for RTUuidFromStr [ 31.082280] vboxnetflt: Unknown symbol RTUuidFromStr (err -22) [ 31.082339] vboxnetflt: no symbol version for RTSemEventSignal [ 31.082341] vboxnetflt: Unknown symbol RTSemEventSignal (err -22) [ 31.082402] vboxnetflt: no symbol version for RTErrConvertFromErrno [ 31.082404] vboxnetflt: Unknown symbol RTErrConvertFromErrno (err -22) [ 31.082464] vboxnetflt: no symbol version for RTSemEventWait [ 31.082466] vboxnetflt: Unknown symbol RTSemEventWait (err -22) [ 31.082526] vboxnetflt: no symbol version for RTSpinlockReleaseNoInts [ 31.082528] vboxnetflt: Unknown symbol RTSpinlockReleaseNoInts (err -22) [ 31.082586] vboxnetflt: no symbol version for RTMemAllocZ [ 31.082588] vboxnetflt: Unknown symbol RTMemAllocZ (err -22) [ 31.082650] vboxnetflt: no symbol version for RTErrConvertToErrno [ 31.082652] vboxnetflt: Unknown symbol RTErrConvertToErrno (err -22) [ 31.082744] vboxnetflt: no symbol version for RTSemFastMutexRequest [ 31.082746] vboxnetflt: Unknown symbol RTSemFastMutexRequest (err -22) [ 31.082807] vboxnetflt: no symbol version for RTSpinlockCreate [ 31.082809] vboxnetflt: Unknown symbol RTSpinlockCreate (err -22) [ 31.082869] vboxnetflt: no symbol version for RTNetIPv4PseudoChecksum [ 31.082871] vboxnetflt: Unknown symbol RTNetIPv4PseudoChecksum (err -22) [ 31.082965] vboxnetflt: no symbol version for RTLogRelDefaultInstance [ 31.082968] vboxnetflt: Unknown symbol RTLogRelDefaultInstance (err -22) [ 31.083027] vboxnetflt: no symbol version for RTMemFree [ 31.083028] vboxnetflt: Unknown symbol RTMemFree (err -22) [ 31.083118] vboxnetflt: no symbol version for RTSemFastMutexRelease [ 31.083120] vboxnetflt: Unknown symbol RTSemFastMutexRelease (err -22) [ 31.083223] vboxnetflt: no symbol version for RTTimeNanoTS [ 31.083225] vboxnetflt: Unknown symbol RTTimeNanoTS (err -22) [ 31.083319] vboxnetflt: no symbol version for RTNetIPv4HdrChecksum [ 31.083321] vboxnetflt: Unknown symbol RTNetIPv4HdrChecksum (err -22) [ 31.083484] vboxnetflt: no symbol version for RTSpinlockDestroy [ 31.083486] vboxnetflt: Unknown symbol RTSpinlockDestroy (err -22) [ 31.083597] vboxnetflt: no symbol version for RTSemEventCreate [ 31.083599] vboxnetflt: Unknown symbol RTSemEventCreate (err -22) [ 31.083661] vboxnetflt: no symbol version for RTLogLoggerEx [ 31.083663] vboxnetflt: Unknown symbol RTLogLoggerEx (err -22) [ 31.083723] vboxnetflt: no symbol version for RTNetIPv6PseudoChecksumEx [ 31.083726] vboxnetflt: Unknown symbol RTNetIPv6PseudoChecksumEx (err -22) [ 31.083817] vboxnetflt: no symbol version for RTR0Term [ 31.083819] vboxnetflt: Unknown symbol RTR0Term (err -22) [ 31.083948] vboxnetflt: no symbol version for RTUuidCompareStr [ 31.083950] vboxnetflt: Unknown symbol RTUuidCompareStr (err -22) [ 31.084010] vboxnetflt: no symbol version for RTThreadPreemptIsEnabled [ 31.084012] vboxnetflt: Unknown symbol RTThreadPreemptIsEnabled (err -22) [ 31.084126] vboxnetflt: no symbol version for RTSemFastMutexDestroy [ 31.084128] vboxnetflt: Unknown symbol RTSemFastMutexDestroy (err -22) [ 31.084188] vboxnetflt: no symbol version for RTSpinlockAcquireNoInts [ 31.084190] vboxnetflt: Unknown symbol RTSpinlockAcquireNoInts (err -22) [ 31.160155] e1000e: eth0 NIC Link is Down [ 31.435519] audit_printk_skb: 3 callbacks suppressed [ 31.435524] type=1400 audit(1279558718.711:16): operation="getattr" pid=1299 parent=1298 profile="/usr/sbin/cupsd" name="/lib/" pid=1299 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 31.435555] type=1400 audit(1279558718.711:17): operation="getattr" pid=1299 parent=1298 profile="/usr/sbin/cupsd" name="/usr/lib/" pid=1299 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 32.822741] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 32.822747] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 32.851993] e1000e: eth0 NIC Link is Down [ 32.865548] ata1.00: configured for UDMA/133 [ 32.865553] ata1: EH complete [ 33.035563] ata5.00: configured for UDMA/133 [ 33.035571] ata5: EH complete [ 33.071802] usb 6-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1 [ 34.141209] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 34.219035] EXT4-fs (sda5): re-mounted. Opts: commit=0 [ 34.472133] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 34.472138] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 34.551381] e1000e: eth0 NIC Link is Down [ 36.163704] ata1.00: configured for UDMA/133 [ 36.163710] ata1: EH complete [ 36.340939] ata5.00: configured for UDMA/133 [ 36.340944] ata5: EH complete [ 37.270913] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 37.274670] EXT4-fs (sda5): re-mounted. Opts: commit=0 [ 37.712740] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 37.712745] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 39.430007] eth0: no IPv6 routers present [ 85.260766] Intel AES-NI instructions are not detected. [ 85.316726] padlock: VIA PadLock not detected. [ 344.246549] lo: Disabled Privacy Extensions [ 704.542204] lo: Disabled Privacy Extensions [ 704.543487] lo: Disabled Privacy Extensions [ 910.156163] lo: Disabled Privacy Extensions [ 1911.120019] usb 1-4: reset high speed USB device using ehci_hcd and address 3 [ 4334.224456] npviewer.bin[3743]: segfault at 0 ip 00000000f621a041 sp 00000000ff815bf0 error 4 in libflashplayer.so[f5e7b000+b04000] [ 9383.248058] ata1.00: configured for UDMA/133 [ 9383.248064] ata1: EH complete [ 9383.590200] ata5.00: configured for UDMA/133 [ 9383.590205] ata5: EH complete [ 9387.918800] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 9391.629281] EXT4-fs (sda5): re-mounted. Opts: commit=0 [ 9441.765214] PM: Syncing filesystems ... done. [ 9448.351729] PM: Preparing system for mem sleep [ 9448.352024] Freezing user space processes ... (elapsed 0.45 seconds) done. [ 9448.811916] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 9448.831915] PM: Entering mem sleep [ 9448.831931] Suspending console(s) (use no_console_suspend to debug) [ 9448.832640] sd 4:0:0:0: [sdb] Synchronizing SCSI cache [ 9448.832682] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 9448.832968] sd 4:0:0:0: [sdb] Stopping disk [ 9448.834373] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 9448.834614] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 9448.834659] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 9448.836133] e1000e 0000:00:19.0: PCI INT A disabled [ 9448.836140] e1000e 0000:00:19.0: PME# enabled [ 9448.836158] pci0000:00: wake-up capability enabled by ACPI [ 9448.850669] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 9448.851266] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 9448.851270] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 9448.853699] sd 0:0:0:0: [sda] Stopping disk [ 9448.910665] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 9448.989075] PM: suspend of drv:sd dev:4:0:0:0 complete after 156.437 msecs [ 9448.989088] PM: suspend of drv:scsi dev:target4:0:0 complete after 156.436 msecs [ 9448.989099] PM: suspend of drv:scsi dev:host4 complete after 156.346 msecs [ 9449.293028] PM: suspend of drv:sd dev:0:0:0:0 complete after 460.348 msecs [ 9449.293039] PM: suspend of drv:scsi dev:target0:0:0 complete after 460.347 msecs [ 9449.293050] PM: suspend of drv:scsi dev:host0 complete after 460.263 msecs [ 9449.341325] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 9449.341357] ACPI handle has no context! [ 9449.361302] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 526.787 msecs [ 9449.431924] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 598.259 msecs [ 9449.431933] PM: suspend of drv: dev:pci0000:00 complete after 595.735 msecs [ 9449.431943] PM: suspend of devices complete after 599.621 msecs [ 9449.431947] PM: suspend devices took 0.600 seconds [ 9449.471985] PM: late suspend of devices complete after 40.034 msecs [ 9449.472511] ACPI: Preparing to enter system sleep state S3 [ 9449.474253] PM: Saving platform NVS memory [ 9449.474386] Disabling non-boot CPUs ... [ 9449.661921] CPU 1 is now offline [ 9449.850027] CPU 2 is now offline [ 9449.960141] Broke affinity for irq 16 [ 9449.960156] Broke affinity for irq 18 [ 9449.960180] Broke affinity for irq 44 [ 9450.070028] CPU 3 is now offline [ 9450.070031] SMP alternatives: switching to UP code [ 9450.076174] Back to C! [ 9450.076174] PM: Restoring platform NVS memory [ 9450.076174] Enabling non-boot CPUs ... [ 9450.076174] SMP alternatives: switching to SMP code [ 9450.082195] Booting Node 0 Processor 1 APIC 0x1 [ 9450.280649] CPU1 is up [ 9450.281014] Booting Node 0 Processor 2 APIC 0x2 [ 9450.491319] CPU2 is up [ 9450.491739] Booting Node 0 Processor 3 APIC 0x3 [ 9450.791992] CPU3 is up [ 9450.793709] ACPI: Waking up from system sleep state S3 [ 9450.800654] pci 0000:00:00.0: restoring config space at offset 0x1 (was 0x20900006, writing 0x20900106) [ 9450.800669] pcieport 0000:00:01.0: restoring config space at offset 0xf (was 0xa0100, writing 0xa010b) [ 9450.800677] pcieport 0000:00:01.0: restoring config space at offset 0x3 (was 0x10000, writing 0x10010) [ 9450.800681] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [ 9450.800701] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 9450.800712] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0xecc1) [ 9450.800716] e1000e 0000:00:19.0: restoring config space at offset 0x5 (was 0x0, writing 0xdffdb000) [ 9450.800719] e1000e 0000:00:19.0: restoring config space at offset 0x4 (was 0x0, writing 0xdffe0000) [ 9450.800725] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [ 9450.800737] uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 9450.800753] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001) [ 9450.800761] uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x209) [ 9450.800777] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001) [ 9450.800791] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x305) [ 9450.800805] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x4 (was 0x0, writing 0xdffdac00) [ 9450.800811] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102) [ 9450.800831] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 9450.800843] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xff97c004, writing 0xdffdc004) [ 9450.800847] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 9450.800851] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100102) [ 9450.800870] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x2010b) [ 9450.800878] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd011d001) [ 9450.800882] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xdbf0dbf0) [ 9450.800886] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0x1010) [ 9450.800889] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x20200) [ 9450.800894] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 9450.800899] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 9450.800927] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x2010b) [ 9450.800934] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xd051d041) [ 9450.800938] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xd030d020) [ 9450.800942] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x0, writing 0x3030) [ 9450.800945] pcieport 0000:00:1c.4: restoring config space at offset 0x6 (was 0x0, writing 0x30300) [ 9450.800951] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 9450.800955] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 9450.800978] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x104) [ 9450.800993] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 9450.801001] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x209) [ 9450.801017] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 9450.801025] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x303) [ 9450.801040] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 9450.801054] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x104) [ 9450.801068] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xff980800) [ 9450.801074] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900100, writing 0x2900102) [ 9450.801095] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 9450.801098] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 9450.801102] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [ 9450.801109] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [ 9450.801140] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107) [ 9450.801157] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x300, writing 0x30a) [ 9450.801171] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 9450.801191] pci 0000:00:1f.3: restoring config space at offset 0xf (was 0x300, writing 0x30a) [ 9450.801202] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0xdffdab00) [ 9450.801208] pci 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800103) [ 9450.801222] nvidia 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 9450.801229] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xdc81) [ 9450.801233] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xdc000004) [ 9450.801237] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xc000000c) [ 9450.801240] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xde000000) [ 9450.801245] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 9450.801326] PM: early resume of devices complete after 0.695 msecs [ 9450.801545] pci0000:00: wake-up capability disabled by ACPI [ 9450.801551] e1000e 0000:00:19.0: PME# disabled [ 9450.801608] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 9450.801623] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 9450.801627] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9450.801630] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 9450.801633] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9450.801678] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 9450.801690] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9450.801696] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 9450.801719] usb usb3: root hub lost power or was reset [ 9450.801737] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 9450.801744] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 9450.801753] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 9450.801758] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 9450.801769] ahci 0000:00:1f.2: setting latency timer to 64 [ 9450.801781] usb usb4: root hub lost power or was reset [ 9450.810067] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 9450.810074] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 9450.810099] usb usb5: root hub lost power or was reset [ 9450.810122] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 9450.810126] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 9450.810130] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 9450.810136] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 9450.810161] usb usb6: root hub lost power or was reset [ 9450.810171] usb usb7: root hub lost power or was reset [ 9450.810198] pci 0000:00:1e.0: setting latency timer to 64 [ 9450.810464] sd 0:0:0:0: [sda] Starting disk [ 9450.810505] sd 4:0:0:0: [sdb] Starting disk [ 9450.960499] PM: resume of drv:usb dev:1-1.4 complete after 149.738 msecs [ 9450.960514] PM: resume of drv:usb-storage dev:1-1.4:1.0 complete after 149.734 msecs [ 9450.960534] PM: resume of drv:scsi dev:host7 complete after 149.741 msecs [ 9450.960541] PM: resume of drv:scsi_host dev:host7 complete after 149.730 msecs [ 9450.960545] PM: resume of drv:scsi dev:target7:0:0 complete after 149.680 msecs [ 9450.960560] PM: resume of drv:sd dev:7:0:0:0 complete after 149.676 msecs [ 9450.960567] PM: resume of drv:sd dev:7:0:0:1 complete after 149.643 msecs [ 9450.960574] PM: resume of drv:sd dev:7:0:0:2 complete after 149.614 msecs [ 9450.960581] PM: resume of drv:sd dev:7:0:0:3 complete after 149.585 msecs [ 9450.960586] PM: resume of drv:scsi_device dev:7:0:0:0 complete after 149.682 msecs [ 9450.960590] PM: resume of drv:scsi_device dev:7:0:0:1 complete after 149.649 msecs [ 9450.960594] PM: resume of drv:scsi_device dev:7:0:0:2 complete after 149.616 msecs [ 9450.960598] PM: resume of drv:scsi_device dev:7:0:0:3 complete after 149.584 msecs [ 9450.962491] PM: resume of drv:usb dev:1-1.3 complete after 151.771 msecs [ 9450.962501] PM: resume of drv:hub dev:1-1.3:1.0 complete after 151.762 msecs [ 9450.971282] PM: resume of drv:usb dev:usb3 complete after 161.090 msecs [ 9450.971288] PM: resume of drv:hub dev:3-0:1.0 complete after 161.081 msecs [ 9450.980114] PM: resume of drv:usb dev:usb4 complete after 169.891 msecs [ 9450.980123] PM: resume of drv:hub dev:4-0:1.0 complete after 169.876 msecs [ 9450.980133] PM: resume of drv:usb dev:usb5 complete after 169.871 msecs [ 9450.980141] PM: resume of drv:hub dev:5-0:1.0 complete after 169.860 msecs [ 9451.030857] PM: resume of drv:usb dev:1-1.3.3 complete after 220.027 msecs [ 9451.030865] PM: resume of drv:usbhid dev:1-1.3.3:1.0 complete after 220.017 msecs [ 9451.090049] PM: resume of drv:usb dev:usb6 complete after 279.753 msecs [ 9451.090057] PM: resume of drv:hub dev:6-0:1.0 complete after 279.742 msecs [ 9451.090060] PM: resume of drv:usb dev:usb7 complete after 279.729 msecs [ 9451.090068] PM: resume of drv:hub dev:7-0:1.0 complete after 279.718 msecs [ 9451.090072] PM: resume of drv: dev:ep_81 complete after 109.918 msecs [ 9451.142745] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 341.273 msecs [ 9451.160068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9451.161738] ata2.00: configured for UDMA/100 [ 9451.180061] ata4: SATA link down (SStatus 0 SControl 300) [ 9451.200064] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9451.201211] PM: resume of drv:nvidia dev:0000:01:00.0 complete after 399.422 msecs [ 9451.201274] usb 6-2: reset full speed USB device using uhci_hcd and address 2 [ 9451.211289] ata3: SATA link down (SStatus 0 SControl 300) [ 9451.225519] ata6.00: configured for UDMA/100 [ 9451.373045] usblp 6-2:1.0: no reset_resume for driver usblp? [ 9451.373146] usblp0: removed [ 9451.373153] PM: resume of drv:usb dev:6-2 complete after 562.617 msecs [ 9451.373168] PM: resume of drv:usb dev:6-2:1.0 complete after 562.615 msecs [ 9451.373172] PM: resume of drv:usb dev:6-2:1.2 complete after 562.581 msecs [ 9451.373176] PM: resume of drv:usb dev:6-2:1.1 complete after 562.605 msecs [ 9451.620655] usb 7-2: reset low speed USB device using uhci_hcd and address 2 [ 9451.960006] PM: resume of drv:usb dev:7-2 complete after 1149.339 msecs [ 9451.960018] PM: resume of drv:usbhid dev:7-2:1.0 complete after 1149.333 msecs [ 9451.960025] PM: resume of drv:usbhid dev:7-2:1.1 complete after 1149.323 msecs [ 9454.650153] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9454.660850] ata1.00: configured for UDMA/133 [ 9454.686892] PM: resume of drv:sd dev:0:0:0:0 complete after 3876.430 msecs [ 9454.686903] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3876.417 msecs [ 9455.750153] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 9455.758056] ata5.00: configured for UDMA/133 [ 9455.781384] PM: resume of drv:sd dev:4:0:0:0 complete after 4970.878 msecs [ 9455.781395] PM: resume of drv:scsi_device dev:4:0:0:0 complete after 4970.873 msecs [ 9456.020012] usb 1-4: reset high speed USB device using ehci_hcd and address 3 [ 9462.240779] PM: resume of drv:usb dev:1-4 complete after 11430.379 msecs [ 9462.240787] PM: resume of drv:usb-storage dev:1-4:1.0 complete after 11430.376 msecs [ 9462.240806] PM: resume of drv: dev:ep_81 complete after 11098.047 msecs [ 9462.240810] PM: resume of drv:scsi dev:host6 complete after 11430.387 msecs [ 9462.240820] PM: resume of drv:scsi_host dev:host6 complete after 11430.379 msecs [ 9462.240824] PM: resume of drv:scsi dev:target6:0:0 complete after 11430.218 msecs [ 9462.240835] PM: resume of drv:sd dev:6:0:0:0 complete after 11430.208 msecs [ 9462.240844] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 11430.197 msecs [ 9462.240939] PM: resume of devices complete after 11439.587 msecs [ 9462.245214] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0180 [ 9462.245452] PM: resume devices took 11.440 seconds [ 9462.245454] ------------[ cut here ]------------ [ 9462.245459] WARNING: at /build/buildd/linux-2.6.35/kernel/power/suspend_test.c:53 suspend_test_finish+0x88/0x90() [ 9462.245461] Hardware name: Dell DXP061 [ 9462.245463] Component: resume devices, time: 11440 [ 9462.245464] Modules linked in: cryptd aes_x86_64 aes_generic binfmt_misc vboxdrv ppdev parport_pc snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi nvidia(P) snd_seq_midi_event snd_seq snd_timer snd_seq_device snd psmouse lp vga16fb soundcore vgastate snd_page_alloc dcdbas intel_agp parport joydev usblp serio_raw usbhid hid usb_storage ahci libahci e1000e [ 9462.245488] Pid: 7428, comm: s2ram Tainted: P 2.6.35-9-generic #14-Ubuntu [ 9462.245490] Call Trace: [ 9462.245495] [] warn_slowpath_common+0x7f/0xc0 [ 9462.245498] [] warn_slowpath_fmt+0x46/0x50 [ 9462.245501] [] suspend_test_finish+0x88/0x90 [ 9462.245503] [] suspend_devices_and_enter+0xd1/0x110 [ 9462.245506] [] enter_state+0xd8/0x110 [ 9462.245508] [] state_store+0x9a/0x100 [ 9462.245512] [] kobj_attr_store+0x17/0x20 [ 9462.245515] [] sysfs_write_file+0xf2/0x180 [ 9462.245518] [] vfs_write+0xb8/0x1a0 [ 9462.245522] [] ? do_page_fault+0x15e/0x350 [ 9462.245524] [] sys_write+0x51/0x80 [ 9462.245528] [] system_call_fastpath+0x16/0x1b [ 9462.245530] ---[ end trace a0c61773fc41021d ]--- [ 9462.245569] PM: Finishing wakeup. [ 9462.245571] Restarting tasks ... done. [ 9491.560251] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 9491.630079] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [ 9491.630591] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9495.471517] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 9495.471521] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 9495.471931] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9496.010833] e1000e: eth0 NIC Link is Down [ 9497.439341] type=1400 audit(1279568772.444:18): operation="getattr" pid=7742 parent=921 profile="/sbin/dhclient3" name="/lib/" pid=7742 comm="dhclient" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 9497.447947] type=1400 audit(1279568772.454:19): operation="getattr" pid=7742 parent=921 profile="/sbin/dhclient3" name="/usr/lib/" pid=7742 comm="dhclient" requested_mask="r" denied_mask="r" fsuid=0 ouid=0 [ 9497.630908] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 9497.630912] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 9498.420837] e1000e: eth0 NIC Link is Down [ 9499.950936] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 9499.950940] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 9500.848240] e1000e: eth0 NIC Link is Down [ 9502.470889] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 9502.470893] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 9502.540126] e1000e: eth0 NIC Link is Down [ 9504.140926] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9504.140929] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 9506.020673] eth0: no IPv6 routers present [ 9523.028892] ata1.00: configured for UDMA/133 [ 9523.028898] ata1: EH complete [ 9523.316214] ata5.00: configured for UDMA/133 [ 9523.316219] ata5: EH complete [ 9526.335245] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 9528.473552] EXT4-fs (sda5): re-mounted. Opts: commit=0