[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-server (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 20:38:33 UTC 2010 (Ubuntu 2.6.32-22.36-server 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-server root=UUID=1bff9174-0c2d-4050-94cb-c765ebe896a6 ro quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000f9ff0000 (usable) [ 0.000000] BIOS-e820: 00000000f9ff0000 - 00000000f9fff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000f9fff000 - 00000000fa000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xf9ff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back [ 0.000000] 3 base 00E0000000 mask FFF0000000 write-back [ 0.000000] 4 base 00F0000000 mask FFF8000000 write-back [ 0.000000] 5 base 00F8000000 mask FFFE000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000f9ff0000 (usable) [ 0.000000] modified: 00000000f9ff0000 - 00000000f9fff000 (ACPI data) [ 0.000000] modified: 00000000f9fff000 - 00000000fa000000 (ACPI NVS) [ 0.000000] modified: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000f9ff0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00f9e00000 page 2M [ 0.000000] 00f9e00000 - 00f9ff0000 page 4k [ 0.000000] kernel direct mapping tables up to f9ff0000 @ 10000-16000 [ 0.000000] RAMDISK: 3770f000 - 37fef867 [ 0.000000] ACPI: RSDP 00000000000f6f20 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000f9ff0100 00054 (v01 A M I OEMXSDT 07000626 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000f9ff0281 000F4 (v01 A M I OEMFACP 07000626 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000f9ff0410 03751 (v01 0AAAA 0AAAA000 00000000 INTL 02002026) [ 0.000000] ACPI: FACS 00000000f9fff000 00040 [ 0.000000] ACPI: APIC 00000000f9ff0380 00084 (v01 A M I OEMAPIC 07000626 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000f9fff040 00041 (v01 A M I OEMBIOS 07000626 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000f9ff3b70 00110 (v01 A M I OEMSRAT 07000626 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000f9ff3c80 00038 (v01 A M I OEMHPET 07000626 MSFT 00000097) [ 0.000000] ACPI: ASF! 00000000f9ff3cc0 00086 (v01 AMIASF AMDSTRET 00000001 INTL 02002026) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 1 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 [ 0.000000] SRAT: Node 1 PXM 1 80000000-fa000000 [ 0.000000] SRAT: Node 1 PXM 1 100000000-100000000 [ 0.000000] SRAT: Node 0 PXM 0 0-9fc00 [ 0.000000] NUMA: Allocated memnodemap from 14000 - 15f80 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000080000000 [ 0.000000] NODE_DATA [0000000000015f80 - 000000000001af7f] [ 0.000000] bootmap [000000000001b000 - 000000000002afff] pages 10 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0080000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a46ea4] TEXT DATA BSS ==> [0001000000 - 0001a46ea4] [ 0.000000] #3 [003770f000 - 0037fef867] RAMDISK ==> [003770f000 - 0037fef867] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a47000 - 0001a47200] BRK ==> [0001a47000 - 0001a47200] [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] [ 0.000000] #7 [0000014000 - 0000015f80] MEMNODEMAP ==> [0000014000 - 0000015f80] [ 0.000000] Bootmem setup node 1 0000000080000000-00000000f9ff0000 [ 0.000000] NODE_DATA [0000000080000000 - 0000000080004fff] [ 0.000000] bootmap [0000000080005000 - 00000000800143ff] pages 10 [ 0.000000] (8 early reservations) ==> bootmem [0080000000 - 00f9ff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #2 [0001000000 - 0001a46ea4] TEXT DATA BSS [ 0.000000] #3 [003770f000 - 0037fef867] RAMDISK [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved [ 0.000000] #5 [0001a47000 - 0001a47200] BRK [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE [ 0.000000] #7 [0000014000 - 0000015f80] MEMNODEMAP [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0 [ 0.000000] [ffffea0001c00000-ffffea00037fffff] PMD -> [ffff880080200000-ffff880081dfffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00080000 [ 0.000000] 1: 0x00080000 -> 0x000f9ff0 [ 0.000000] On node 0 totalpages: 524175 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3823 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7112 pages used for memmap [ 0.000000] DMA32 zone: 513080 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 499696 [ 0.000000] DMA32 zone: 6832 pages used for memmap [ 0.000000] DMA32 zone: 492864 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfebff000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfebff000, GSI 24-27 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfebfe000] gsi_base[28]) [ 0.000000] IOAPIC[2]: apic_id 4, version 17, address 0xfebfe000, GSI 28-31 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x102282a0 base: 0xfec01000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 32 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at fa000000 (gap: fa000000:5780000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u1048576 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 2 [1] 1 3 [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1009767 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-server root=UUID=1bff9174-0c2d-4050-94cb-c765ebe896a6 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 146c000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 4017600k/4095936k available (5499k kernel code, 452k absent, 77884k reserved, 3081k data, 796k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:576 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: PIT calibration matches HPET. 1 loops [ 0.000000] Detected 1991.846 MHz processor. [ 0.020007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3983.69 BogoMIPS (lpj=19918460) [ 0.020040] Security Framework initialized [ 0.020064] AppArmor: AppArmor initialized [ 0.020721] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.023953] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.025417] Mount-cache hash table entries: 256 [ 0.025601] Initializing cgroup subsys ns [ 0.025605] Initializing cgroup subsys cpuacct [ 0.025610] Initializing cgroup subsys memory [ 0.025631] Initializing cgroup subsys devices [ 0.025634] Initializing cgroup subsys freezer [ 0.025636] Initializing cgroup subsys net_cls [ 0.025667] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.025670] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.025673] CPU 0/0x0 -> Node 0 [ 0.025676] tseg: 0000000000 [ 0.025697] mce: CPU supports 5 MCE banks [ 0.025711] Performance Events: AMD PMU driver. [ 0.025716] ... version: 0 [ 0.025718] ... bit width: 48 [ 0.025720] ... generic registers: 4 [ 0.025722] ... value mask: 0000ffffffffffff [ 0.025724] ... max period: 00007fffffffffff [ 0.025726] ... fixed-purpose events: 0 [ 0.025727] ... event mask: 000000000000000f [ 0.027736] ACPI: Core revision 20090903 [ 0.035764] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.035770] ftrace: allocating 22808 entries in 90 pages [ 0.040122] Setting APIC routing to flat [ 0.040589] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.143484] CPU0: AMD Opteron(tm) Processor 246 stepping 0a [ 0.150000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.030000] Initializing CPU#1 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.030000] CPU 1/0x1 -> Node 1 [ 0.300125] CPU1: AMD Opteron(tm) Processor 246 stepping 0a [ 0.300141] Brought up 2 CPUs [ 0.300143] Total of 2 processors activated (7968.00 BogoMIPS). [ 0.300429] CPU0 attaching sched-domain: [ 0.300432] domain 0: span 0-1 level NODE [ 0.300435] groups: 0 1 [ 0.300441] CPU1 attaching sched-domain: [ 0.300443] domain 0: span 0-1 level NODE [ 0.300445] groups: 1 0 [ 0.300544] devtmpfs: initialized [ 0.303269] regulator: core version 0.5 [ 0.303269] Time: 21:28:20 Date: 06/23/10 [ 0.303269] NET: Registered protocol family 16 [ 0.303269] node 0 link 0: io port [1000, ffffff] [ 0.303269] TOM: 00000000fa000000 aka 4000M [ 0.303269] node 0 link 0: mmio [a0000, bffff] [ 0.303269] node 0 link 0: mmio [fa000000, ffffffff] [ 0.303269] bus: [00,ff] on node 0 link 0 [ 0.303269] bus: 00 index 0 io port: [0, ffff] [ 0.303269] bus: 00 index 1 mmio: [a0000, bffff] [ 0.303269] bus: 00 index 2 mmio: [fa000000, fcffffffff] [ 0.303269] ACPI: bus type pci registered [ 0.303269] PCI: Using configuration type 1 for base access [ 0.303269] Trying to unpack rootfs image as initramfs... [ 0.310356] bio: create slab at 0 [ 0.310611] ACPI: EC: Look up EC in DSDT [ 0.312760] ACPI: Executed 1 blocks of module-level executable AML code [ 0.321865] ACPI: Interpreter enabled [ 0.321870] ACPI: (supports S0 S1 S4 S5) [ 0.321891] ACPI: Using IOAPIC for interrupt routing [ 0.328461] ACPI: No dock devices found. [ 0.328589] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.328771] pci 0000:00:07.1: reg 20 io port: [0xffa0-0xffaf] [ 0.328803] pci 0000:00:07.2: reg 10 io port: [0xcc00-0xcc1f] [ 0.328946] pci 0000:00:0a.1: reg 10 64bit mmio: [0xfebff000-0xfebfffff] [ 0.329009] pci 0000:00:0b.1: reg 10 64bit mmio: [0xfebfe000-0xfebfefff] [ 0.329199] pci 0000:03:00.0: reg 10 32bit mmio: [0xfeafc000-0xfeafcfff] [ 0.329254] pci 0000:03:00.1: reg 10 32bit mmio: [0xfeafd000-0xfeafdfff] [ 0.329347] pci 0000:03:04.0: reg 10 io port: [0xb400-0xb4ff] [ 0.329359] pci 0000:03:04.0: reg 14 64bit mmio: [0xfeaa0000-0xfeabffff] [ 0.329371] pci 0000:03:04.0: reg 1c 64bit mmio: [0xfea80000-0xfea9ffff] [ 0.329384] pci 0000:03:04.0: reg 30 32bit mmio pref: [0xfe400000-0xfe7fffff] [ 0.329412] pci 0000:03:04.0: supports D1 D2 [ 0.329454] pci 0000:03:05.0: reg 10 io port: [0xbc00-0xbc07] [ 0.329461] pci 0000:03:05.0: reg 14 io port: [0xb000-0xb003] [ 0.329468] pci 0000:03:05.0: reg 18 io port: [0xac00-0xac07] [ 0.329475] pci 0000:03:05.0: reg 1c io port: [0xa800-0xa803] [ 0.329482] pci 0000:03:05.0: reg 20 io port: [0xa400-0xa40f] [ 0.329490] pci 0000:03:05.0: reg 24 32bit mmio: [0xfeafec00-0xfeafefff] [ 0.329497] pci 0000:03:05.0: reg 30 32bit mmio pref: [0xfea00000-0xfea7ffff] [ 0.329517] pci 0000:03:05.0: supports D1 D2 [ 0.329555] pci 0000:03:06.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.329563] pci 0000:03:06.0: reg 14 io port: [0xb800-0xb8ff] [ 0.329570] pci 0000:03:06.0: reg 18 32bit mmio: [0xfeaff000-0xfeafffff] [ 0.329593] pci 0000:03:06.0: reg 30 32bit mmio pref: [0xfeac0000-0xfeadffff] [ 0.329614] pci 0000:03:06.0: supports D1 D2 [ 0.329652] pci 0000:03:08.0: reg 10 32bit mmio: [0xfeafb000-0xfeafbfff] [ 0.329659] pci 0000:03:08.0: reg 14 io port: [0xa000-0xa03f] [ 0.329666] pci 0000:03:08.0: reg 18 32bit mmio: [0xfe9e0000-0xfe9fffff] [ 0.329704] pci 0000:03:08.0: supports D1 D2 [ 0.329706] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.329711] pci 0000:03:08.0: PME# disabled [ 0.329751] pci 0000:00:06.0: bridge io port: [0x9000-0xbfff] [ 0.329755] pci 0000:00:06.0: bridge 32bit mmio: [0xfc000000-0xfeafffff] [ 0.329760] pci 0000:00:06.0: bridge 32bit mmio pref: [0xff500000-0xff5fffff] [ 0.329799] pci 0000:02:09.0: reg 10 64bit mmio: [0xfbfc0000-0xfbfcffff] [ 0.329807] pci 0000:02:09.0: reg 18 64bit mmio: [0xfbfb0000-0xfbfbffff] [ 0.329817] pci 0000:02:09.0: reg 30 32bit mmio pref: [0xfbfa0000-0xfbfaffff] [ 0.329833] pci 0000:02:09.0: PME# supported from D3hot D3cold [ 0.329836] pci 0000:02:09.0: PME# disabled [ 0.329869] pci 0000:02:09.1: reg 10 64bit mmio: [0xfbff0000-0xfbffffff] [ 0.329877] pci 0000:02:09.1: reg 18 64bit mmio: [0xfbfe0000-0xfbfeffff] [ 0.329887] pci 0000:02:09.1: reg 30 32bit mmio pref: [0xfbfd0000-0xfbfdffff] [ 0.329903] pci 0000:02:09.1: PME# supported from D3hot D3cold [ 0.329906] pci 0000:02:09.1: PME# disabled [ 0.329934] pci 0000:00:0a.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff] [ 0.329939] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xff400000-0xff4fffff] [ 0.329978] pci 0000:01:03.0: reg 10 64bit mmio: [0xfbe80000-0xfbefffff] [ 0.329994] pci 0000:01:03.0: reg 30 32bit mmio pref: [0xfbe00000-0xfbe7ffff] [ 0.330044] pci 0000:00:0b.0: bridge 32bit mmio: [0xfbd00000-0xfbefffff] [ 0.330049] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xff300000-0xff3fffff] [ 0.330062] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.330119] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.330204] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT] [ 0.330299] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT] [ 0.333055] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.333161] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.333266] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.333371] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.333486] vgaarb: device added: PCI:0000:03:06.0,decodes=io+mem,owns=io+mem,locks=none [ 0.333491] vgaarb: loaded [ 0.333606] SCSI subsystem initialized [ 0.333688] libata version 3.00 loaded. [ 0.333769] usbcore: registered new interface driver usbfs [ 0.333782] usbcore: registered new interface driver hub [ 0.333825] usbcore: registered new device driver usb [ 0.333962] ACPI: WMI: Mapper loaded [ 0.333964] PCI: Using ACPI for IRQ routing [ 0.334140] NetLabel: Initializing [ 0.334142] NetLabel: domain hash size = 128 [ 0.334144] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.334160] NetLabel: unlabeled traffic allowed by default [ 0.334198] hpet0: at MMIO 0xfec01000, IRQs 2, 8, 0 [ 0.334203] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.340171] Switching to clocksource hpet [ 0.342145] AppArmor: AppArmor Filesystem Enabled [ 0.342169] pnp: PnP ACPI init [ 0.342190] ACPI: bus type pnp registered [ 0.346870] pnp: PnP ACPI: found 14 devices [ 0.346872] ACPI: ACPI bus type pnp unregistered [ 0.346888] system 00:09: ioport range 0x680-0x6ff has been reserved [ 0.346891] system 00:09: ioport range 0x295-0x296 has been reserved [ 0.346894] system 00:09: ioport range 0x778-0x77f has been reserved [ 0.346898] system 00:09: ioport range 0xb78-0xb7f has been reserved [ 0.346901] system 00:09: ioport range 0xf78-0xf7f has been reserved [ 0.346907] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 0.346915] system 00:0a: ioport range 0x1000-0x10bf has been reserved [ 0.346918] system 00:0a: ioport range 0x10e0-0x10ff has been reserved [ 0.346921] system 00:0a: ioport range 0x10c0-0x10df has been reserved [ 0.346925] system 00:0a: ioport range 0xde00-0xde7f has been reserved [ 0.346933] system 00:0a: ioport range 0xde80-0xdeff has been reserved [ 0.346939] system 00:0c: ioport range 0xca0-0xcaf has been reserved [ 0.346943] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.346946] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.346950] system 00:0c: iomem range 0xfff80000-0xffffffff has been reserved [ 0.346953] system 00:0c: iomem range 0xff780000-0xff7fffff has been reserved [ 0.346959] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.346961] system 00:0d: iomem range 0xc0000-0xdffff has been reserved [ 0.346965] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.346968] system 00:0d: iomem range 0x100000-0xf9ffffff could not be reserved [ 0.351703] pci 0000:00:06.0: PCI bridge, secondary bus 0000:03 [ 0.351707] pci 0000:00:06.0: IO window: 0x9000-0xbfff [ 0.351712] pci 0000:00:06.0: MEM window: 0xfc000000-0xfeafffff [ 0.351717] pci 0000:00:06.0: PREFETCH window: 0xff500000-0xff5fffff [ 0.351725] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 0.351727] pci 0000:00:0a.0: IO window: disabled [ 0.351730] pci 0000:00:0a.0: MEM window: 0xfbf00000-0xfbffffff [ 0.351734] pci 0000:00:0a.0: PREFETCH window: 0x000000ff400000-0x000000ff4fffff [ 0.351739] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01 [ 0.351741] pci 0000:00:0b.0: IO window: disabled [ 0.351745] pci 0000:00:0b.0: MEM window: 0xfbd00000-0xfbefffff [ 0.351748] pci 0000:00:0b.0: PREFETCH window: 0x000000ff300000-0x000000ff3fffff [ 0.351767] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.351770] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.351773] pci_bus 0000:03: resource 0 io: [0x9000-0xbfff] [ 0.351776] pci_bus 0000:03: resource 1 mem: [0xfc000000-0xfeafffff] [ 0.351779] pci_bus 0000:03: resource 2 pref mem [0xff500000-0xff5fffff] [ 0.351782] pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfbffffff] [ 0.351785] pci_bus 0000:02: resource 2 pref mem [0xff400000-0xff4fffff] [ 0.351788] pci_bus 0000:01: resource 1 mem: [0xfbd00000-0xfbefffff] [ 0.351791] pci_bus 0000:01: resource 2 pref mem [0xff300000-0xff3fffff] [ 0.351841] NET: Registered protocol family 2 [ 0.352059] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.354106] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.360480] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.361142] TCP: Hash tables configured (established 524288 bind 65536) [ 0.361145] TCP reno registered [ 0.361278] NET: Registered protocol family 1 [ 0.361306] pci 0000:00:07.3: boot interrupts on device [1022:746b] already disabled [ 0.361311] pci 0000:00:0a.0: MSI quirk detected; subordinate MSI disabled [ 0.361316] pci 0000:00:0a.0: disabled boot interrupts on device [1022:7450] [ 0.361319] pci 0000:00:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.361324] pci 0000:00:0b.0: MSI quirk detected; subordinate MSI disabled [ 0.361327] pci 0000:00:0b.0: disabled boot interrupts on device [1022:7450] [ 0.361330] pci 0000:00:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC [ 0.420028] pci 0000:03:06.0: Boot video device [ 0.420043] pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling [ 0.420446] Scanning for low memory corruption every 60 seconds [ 0.420590] audit: initializing netlink socket (disabled) [ 0.420602] type=2000 audit(1277328500.420:1): initialized [ 0.430599] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.432236] VFS: Disk quotas dquot_6.5.2 [ 0.432299] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.432997] fuse init (API version 7.13) [ 0.433093] msgmni has been set to 7846 [ 0.433333] alg: No test for stdrng (krng) [ 0.433395] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.433398] io scheduler noop registered [ 0.433400] io scheduler anticipatory registered [ 0.433403] io scheduler deadline registered (default) [ 0.433443] io scheduler cfq registered [ 0.433689] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.433714] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.433819] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.433829] ACPI: Power Button [PWRB] [ 0.433877] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.433880] ACPI: Power Button [PWRF] [ 0.434163] processor LNXCPU:00: registered as cooling_device0 [ 0.434204] processor LNXCPU:01: registered as cooling_device1 [ 0.437601] Linux agpgart interface v0.103 [ 0.437642] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.437759] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.437863] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.438130] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.438266] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.439496] brd: module loaded [ 0.440035] loop: module loaded [ 0.440131] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.440784] Fixed MDIO Bus: probed [ 0.440822] PPP generic driver version 2.4.2 [ 0.440860] tun: Universal TUN/TAP device driver, 1.6 [ 0.440862] tun: (C) 1999-2004 Max Krasnyansky [ 0.440957] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.440976] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.441017] alloc irq_desc for 19 on node 0 [ 0.441020] alloc kstat_irqs on node 0 [ 0.441032] ohci_hcd 0000:03:00.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.441051] ohci_hcd 0000:03:00.0: OHCI Host Controller [ 0.441086] ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 [ 0.441126] ohci_hcd 0000:03:00.0: irq 19, io mem 0xfeafc000 [ 0.502140] usb usb1: configuration #1 chosen from 1 choice [ 0.502170] hub 1-0:1.0: USB hub found [ 0.502184] hub 1-0:1.0: 3 ports detected [ 0.502264] ohci_hcd 0000:03:00.1: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.502275] ohci_hcd 0000:03:00.1: OHCI Host Controller [ 0.502311] ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2 [ 0.502326] ohci_hcd 0000:03:00.1: irq 19, io mem 0xfeafd000 [ 0.562103] usb usb2: configuration #1 chosen from 1 choice [ 0.562130] hub 2-0:1.0: USB hub found [ 0.562140] hub 2-0:1.0: 3 ports detected [ 0.562197] uhci_hcd: USB Universal Host Controller Interface driver [ 0.562272] PNP: No PS/2 controller found. Probing ports directly. [ 0.564423] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.564430] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.564507] mice: PS/2 mouse device common for all mice [ 0.564624] rtc_cmos 00:02: RTC can wake from S4 [ 0.564665] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.564706] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.564845] device-mapper: uevent: version 1.0.3 [ 0.564981] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.565063] device-mapper: multipath: version 1.1.0 loaded [ 0.565066] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.565257] cpuidle: using governor ladder [ 0.565259] cpuidle: using governor menu [ 0.565682] TCP cubic registered [ 0.565826] NET: Registered protocol family 10 [ 0.566402] lo: Disabled Privacy Extensions [ 0.566510] Freeing initrd memory: 9090k freed [ 0.566729] NET: Registered protocol family 17 [ 0.566767] powernow-k8: Found 2 AMD Opteron(tm) Processor 246 processors (2 cpu cores) (version 2.20.00) [ 0.566823] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 [ 0.566825] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 [ 0.566827] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x8 [ 0.566892] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 [ 0.566895] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 [ 0.566897] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x8 [ 0.573864] PM: Resume from disk failed. [ 0.573886] registered taskstats version 1 [ 0.574276] Magic number: 14:881:500 [ 0.574401] rtc_cmos 00:02: setting system clock to 2010-06-23 21:28:21 UTC (1277328501) [ 0.574405] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.574407] EDD information not available. [ 0.574469] Freeing unused kernel memory: 796k freed [ 0.575147] Write protecting the kernel read-only data: 7788k [ 0.596572] udev: starting version 151 [ 0.671210] pata_amd 0000:00:07.1: version 0.4.1 [ 0.673230] md: linear personality registered for level -1 [ 0.674846] scsi0 : pata_amd [ 0.679776] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.679780] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.693554] Fusion MPT base driver 3.04.12 [ 0.693558] Copyright (c) 1999-2008 LSI Corporation [ 0.693712] tg3.c:v3.102 (September 1, 2009) [ 0.693731] alloc irq_desc for 24 on node 0 [ 0.693734] alloc kstat_irqs on node 0 [ 0.693750] tg3 0000:02:09.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 0.695513] scsi1 : pata_amd [ 0.696283] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.696287] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.699237] md: multipath personality registered for level -4 [ 0.706241] alloc irq_desc for 18 on node 0 [ 0.706246] alloc kstat_irqs on node 0 [ 0.706260] e100 0000:03:08.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.735384] FDC 0 is a post-1991 82077 [ 0.820059] e100 0000:03:08.0: PME# disabled [ 0.820725] e100: eth0: e100_probe: addr 0xfeafb000, irq 18, MAC addr 00:e0:81:2a:59:7c [ 0.821030] sata_mv 0000:01:03.0: version 1.28 [ 0.821114] alloc irq_desc for 28 on node 0 [ 0.821116] alloc kstat_irqs on node 0 [ 0.821122] sata_mv 0000:01:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 0.829459] sata_mv 0000:01:03.0: Gen-I 32 slots 8 ports SCSI mode IRQ via INTx [ 0.829560] sata_sil 0000:03:05.0: version 2.4 [ 0.829603] sata_sil 0000:03:05.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.829695] scsi2 : sata_mv [ 0.829766] scsi3 : sata_sil [ 0.829840] scsi4 : sata_mv [ 0.829897] scsi5 : sata_sil [ 0.829956] scsi6 : sata_mv [ 0.830066] scsi7 : sata_sil [ 0.830134] scsi8 : sata_mv [ 0.830192] scsi9 : sata_sil [ 0.830248] ata11: SATA max UDMA/100 mmio m1024@0xfeafec00 tf 0xfeafec80 irq 19 [ 0.830252] ata12: SATA max UDMA/100 mmio m1024@0xfeafec00 tf 0xfeafecc0 irq 19 [ 0.830256] ata13: SATA max UDMA/100 mmio m1024@0xfeafec00 tf 0xfeafee80 irq 19 [ 0.830260] ata14: SATA max UDMA/100 mmio m1024@0xfeafec00 tf 0xfeafeec0 irq 19 [ 0.830321] scsi10 : sata_mv [ 0.830536] scsi11 : sata_mv [ 0.830648] scsi12 : sata_mv [ 0.830731] scsi13 : sata_mv [ 0.830776] ata3: SATA max UDMA/133 mmio m524288@0xfbe80000 port 0xfbea2000 irq 28 [ 0.830780] ata4: SATA max UDMA/133 mmio m524288@0xfbe80000 port 0xfbea4000 irq 28 [ 0.830783] ata5: SATA max UDMA/133 mmio m524288@0xfbe80000 port 0xfbea6000 irq 28 [ 0.830786] ata6: SATA max UDMA/133 mmio m524288@0xfbe80000 port 0xfbea8000 irq 28 [ 0.830790] ata7: SATA max UDMA/133 mmio m524288@0xfbe80000 port 0xfbeb2000 irq 28 [ 0.830793] ata8: SATA max UDMA/133 mmio m524288@0xfbe80000 port 0xfbeb4000 irq 28 [ 0.830797] ata9: SATA max UDMA/133 mmio m524288@0xfbe80000 port 0xfbeb6000 irq 28 [ 0.830800] ata10: SATA max UDMA/133 mmio m524288@0xfbe80000 port 0xfbeb8000 irq 28 [ 0.843607] eth1: Tigon3 [partno(BCM95704A7) rev 2003] (PCIX:100MHz:64-bit) MAC address 00:e0:81:2a:db:1c [ 0.843611] eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 0.843614] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 0.843617] eth1: dma_rwctrl[769f4000] dma_mask[64-bit] [ 0.843730] alloc irq_desc for 25 on node 0 [ 0.843733] alloc kstat_irqs on node 0 [ 0.843739] tg3 0000:02:09.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25 [ 0.883613] eth2: Tigon3 [partno(BCM95704A7) rev 2003] (PCIX:100MHz:64-bit) MAC address 00:e0:81:2a:db:1d [ 0.883616] eth2: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 0.883619] eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 0.883621] eth2: dma_rwctrl[769f4000] dma_mask[64-bit] [ 0.891689] ata1.00: ATA-6: WDC WD800JB-00JJC0, 05.01C05, max UDMA/100 [ 0.891695] ata1.00: 156301488 sectors, multi 16: LBA [ 0.891727] ata1.01: ATAPI: DRW-1608P, 1.40, max UDMA/66 [ 0.911578] ata1.00: configured for UDMA/100 [ 0.951504] ata1.01: configured for UDMA/66 [ 0.952047] scsi 0:0:0:0: Direct-Access ATA WDC WD800JB-00JJ 05.0 PQ: 0 ANSI: 5 [ 0.952307] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.957265] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 0.958047] scsi 0:0:1:0: CD-ROM DRW-1608P 1.40 PQ: 0 ANSI: 5 [ 0.958086] sd 0:0:0:0: [sda] Write Protect is off [ 0.958089] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.958112] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.981238] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 0.981242] Uniform CD-ROM driver Revision: 3.20 [ 0.981288] sda: [ 0.981370] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 0.981416] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 0.986043] sda1 sda2 [ 0.986403] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.000029] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 1.160437] ata2.00: ATA-6: WDC WD800JB-00JJC0, 05.01C05, max UDMA/100 [ 1.160441] ata2.00: 156301488 sectors, multi 16: LBA [ 1.160465] ata2.00: limited to UDMA/33 due to 40-wire cable [ 1.180102] ata11: SATA link down (SStatus 0 SControl 310) [ 1.180466] ata2.00: configured for UDMA/33 [ 1.180551] scsi 1:0:0:0: Direct-Access ATA WDC WD800JB-00JJ 05.0 PQ: 0 ANSI: 5 [ 1.180711] sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.180724] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 1.180760] sd 1:0:0:0: [sdb] Write Protect is off [ 1.180764] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.180864] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.181008] sdb: sdb1 sdb2 [ 1.195613] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.228032] usb 2-1: configuration #1 chosen from 1 choice [ 1.340048] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.380059] ata3.00: ATA-6: WDC WD3000JD-00KLB0, 08.05J08, max UDMA/100 [ 1.380062] ata3.00: 586072368 sectors, multi 0: LBA48 [ 1.411268] usb 2-2: new low speed USB device using ohci_hcd and address 3 [ 1.441320] ata3.00: configured for UDMA/100 [ 1.520056] ata12: SATA link down (SStatus 0 SControl 310) [ 1.638966] usb 2-2: configuration #1 chosen from 1 choice [ 1.647796] usbcore: registered new interface driver hiddev [ 1.654221] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:06.0/0000:03:00.1/usb2/2-1/2-1:1.0/input/input3 [ 1.654331] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:03:00.1-1/input0 [ 1.659181] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:06.0/0000:03:00.1/usb2/2-2/2-2:1.0/input/input4 [ 1.659252] generic-usb 0003:413C:2005.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:03:00.1-2/input0 [ 1.659287] usbcore: registered new interface driver usbhid [ 1.659291] usbhid: v2.6:USB HID core driver [ 1.870048] ata13: SATA link down (SStatus 0 SControl 310) [ 2.221295] ata14: SATA link down (SStatus 0 SControl 310) [ 2.221464] scsi 2:0:0:0: Direct-Access ATA WDC WD3000JD-00K 08.0 PQ: 0 ANSI: 5 [ 2.221672] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 2.221833] sd 2:0:0:0: [sdc] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 2.221884] sd 2:0:0:0: [sdc] Write Protect is off [ 2.221887] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.221912] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.222072] sdc: sdc1 [ 2.229617] sd 2:0:0:0: [sdc] Attached SCSI disk [ 2.730042] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.750370] ata4.00: ATA-6: WDC WD3000JD-00KLB0, 08.05J08, max UDMA/100 [ 2.750373] ata4.00: 586072368 sectors, multi 0: LBA48 [ 2.790074] ata4.00: configured for UDMA/100 [ 2.790174] scsi 4:0:0:0: Direct-Access ATA WDC WD3000JD-00K 08.0 PQ: 0 ANSI: 5 [ 2.790335] sd 4:0:0:0: [sdd] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 2.790359] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 2.790382] sd 4:0:0:0: [sdd] Write Protect is off [ 2.790386] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.791491] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.791640] sdd: sdd1 [ 2.798810] sd 4:0:0:0: [sdd] Attached SCSI disk [ 3.300042] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.320362] ata5.00: ATA-6: WDC WD3000JD-00KLB0, 08.05J08, max UDMA/100 [ 3.320365] ata5.00: 586072368 sectors, multi 0: LBA48 [ 3.340378] ata5.00: configured for UDMA/100 [ 3.340451] scsi 6:0:0:0: Direct-Access ATA WDC WD3000JD-00K 08.0 PQ: 0 ANSI: 5 [ 3.340580] sd 6:0:0:0: [sde] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 3.340595] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 3.340623] sd 6:0:0:0: [sde] Write Protect is off [ 3.340626] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 3.340687] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.340812] sde: sde1 [ 3.354370] sd 6:0:0:0: [sde] Attached SCSI disk [ 3.850041] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.870387] ata6.00: ATA-6: WDC WD3200JD-00KLB0, 08.05J08, max UDMA/100 [ 3.870391] ata6.00: 625142448 sectors, multi 0: LBA48 [ 3.910392] ata6.00: configured for UDMA/100 [ 3.910451] scsi 8:0:0:0: Direct-Access ATA WDC WD3200JD-00K 08.0 PQ: 0 ANSI: 5 [ 3.910585] sd 8:0:0:0: [sdf] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 3.910605] sd 8:0:0:0: Attached scsi generic sg6 type 0 [ 3.910627] sd 8:0:0:0: [sdf] Write Protect is off [ 3.910630] sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 3.911740] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.911858] sdf: sdf1 sdf2 [ 3.927823] sd 8:0:0:0: [sdf] Attached SCSI disk [ 4.420043] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.440362] ata7.00: ATA-6: WDC WD3000JD-00KLB0, 08.05J08, max UDMA/100 [ 4.440365] ata7.00: 586072368 sectors, multi 0: LBA48 [ 4.480073] ata7.00: configured for UDMA/100 [ 4.480144] scsi 10:0:0:0: Direct-Access ATA WDC WD3000JD-00K 08.0 PQ: 0 ANSI: 5 [ 4.480274] sd 10:0:0:0: [sdg] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 4.480294] sd 10:0:0:0: Attached scsi generic sg7 type 0 [ 4.480315] sd 10:0:0:0: [sdg] Write Protect is off [ 4.480318] sd 10:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 4.481419] sd 10:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.481539] sdg: sdg1 [ 4.495376] sd 10:0:0:0: [sdg] Attached SCSI disk [ 4.990037] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.010360] ata8.00: ATA-6: WDC WD3000JD-00KLB0, 08.05J08, max UDMA/100 [ 5.010363] ata8.00: 586072368 sectors, multi 0: LBA48 [ 5.030372] ata8.00: configured for UDMA/100 [ 5.030431] scsi 11:0:0:0: Direct-Access ATA WDC WD3000JD-00K 08.0 PQ: 0 ANSI: 5 [ 5.030559] sd 11:0:0:0: [sdh] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 5.030598] sd 11:0:0:0: Attached scsi generic sg8 type 0 [ 5.030604] sd 11:0:0:0: [sdh] Write Protect is off [ 5.030608] sd 11:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 5.030632] sd 11:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.030786] sdh: sdh1 [ 5.050387] sd 11:0:0:0: [sdh] Attached SCSI disk [ 5.540040] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.580057] ata9.00: ATA-6: WDC WD3000JD-00KLB0, 08.05J08, max UDMA/100 [ 5.580060] ata9.00: 586072368 sectors, multi 0: LBA48 [ 5.620377] ata9.00: configured for UDMA/100 [ 5.620438] scsi 12:0:0:0: Direct-Access ATA WDC WD3000JD-00K 08.0 PQ: 0 ANSI: 5 [ 5.620579] sd 12:0:0:0: [sdi] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 5.620593] sd 12:0:0:0: Attached scsi generic sg9 type 0 [ 5.620624] sd 12:0:0:0: [sdi] Write Protect is off [ 5.620627] sd 12:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 5.621735] sd 12:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.621865] sdi: sdi1 [ 5.644048] sd 12:0:0:0: [sdi] Attached SCSI disk [ 6.130039] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.150380] ata10.00: ATA-6: WDC WD3000JD-00KLB0, 08.05J08, max UDMA/100 [ 6.150383] ata10.00: 586072368 sectors, multi 0: LBA48 [ 6.190074] ata10.00: configured for UDMA/100 [ 6.190137] scsi 13:0:0:0: Direct-Access ATA WDC WD3000JD-00K 08.0 PQ: 0 ANSI: 5 [ 6.190275] sd 13:0:0:0: [sdj] 586072368 512-byte logical blocks: (300 GB/279 GiB) [ 6.190309] sd 13:0:0:0: Attached scsi generic sg10 type 0 [ 6.190319] sd 13:0:0:0: [sdj] Write Protect is off [ 6.190322] sd 13:0:0:0: [sdj] Mode Sense: 00 3a 00 00 [ 6.190346] sd 13:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.190496] sdj: sdj1 [ 6.210619] sd 13:0:0:0: [sdj] Attached SCSI disk [ 6.215766] Fusion MPT SPI Host driver 3.04.12 [ 6.227939] alloc irq_desc for 16 on node 0 [ 6.227944] alloc kstat_irqs on node 0 [ 6.227958] mptspi 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.278228] md: raid0 personality registered for level 0 [ 6.367035] mptbase: ioc0: Initiating bringup [ 6.371982] md: raid1 personality registered for level 1 [ 6.383512] async_tx: api initialized (async) [ 6.386036] xor: automatically using best checksumming function: generic_sse [ 6.431262] generic_sse: 6439.600 MB/sec [ 6.431265] xor: using function: generic_sse (6439.600 MB/sec) [ 6.456703] md: bind [ 6.478887] md: bind [ 6.498284] md: bind [ 6.501169] md: bind [ 6.512924] md: bind [ 6.518390] md: bind [ 6.523699] md: bind [ 6.529789] md: bind [ 6.601302] raid6: int64x1 1475 MB/s [ 6.771264] raid6: int64x2 2071 MB/s [ 6.941303] raid6: int64x4 1469 MB/s [ 7.111284] raid6: int64x8 1465 MB/s [ 7.281274] raid6: sse2x1 2320 MB/s [ 7.451264] raid6: sse2x2 3304 MB/s [ 7.590020] ioc0: LSI53C1030 C0: Capabilities={Initiator} [ 7.621270] raid6: sse2x4 3499 MB/s [ 7.621272] raid6: using algorithm sse2x4 (3499 MB/s) [ 7.627699] md: raid6 personality registered for level 6 [ 7.627703] md: raid5 personality registered for level 5 [ 7.627705] md: raid4 personality registered for level 4 [ 7.636081] md: raid10 personality registered for level 10 [ 7.642124] raid5: device sdf1 operational as raid disk 3 [ 7.642130] raid5: device sde1 operational as raid disk 2 [ 7.642132] raid5: device sdj1 operational as raid disk 7 [ 7.642135] raid5: device sdi1 operational as raid disk 6 [ 7.642137] raid5: device sdc1 operational as raid disk 0 [ 7.642139] raid5: device sdh1 operational as raid disk 5 [ 7.642142] raid5: device sdg1 operational as raid disk 4 [ 7.642144] raid5: device sdd1 operational as raid disk 1 [ 7.642942] raid5: allocated 8490kB for md2 [ 7.643221] 3: w=1 pa=0 pr=8 m=1 a=2 r=8 op1=0 op2=0 [ 7.643225] 2: w=2 pa=0 pr=8 m=1 a=2 r=8 op1=0 op2=0 [ 7.643228] 7: w=3 pa=0 pr=8 m=1 a=2 r=8 op1=0 op2=0 [ 7.643231] 6: w=4 pa=0 pr=8 m=1 a=2 r=8 op1=0 op2=0 [ 7.643234] 0: w=5 pa=0 pr=8 m=1 a=2 r=8 op1=0 op2=0 [ 7.643237] 5: w=6 pa=0 pr=8 m=1 a=2 r=8 op1=0 op2=0 [ 7.643240] 4: w=7 pa=0 pr=8 m=1 a=2 r=8 op1=0 op2=0 [ 7.643243] 1: w=8 pa=0 pr=8 m=1 a=2 r=8 op1=0 op2=0 [ 7.643245] raid5: raid level 5 set md2 active with 8 out of 8 devices, algorithm 2 [ 7.643248] RAID5 conf printout: [ 7.643249] --- rd:8 wd:8 [ 7.643252] disk 0, o:1, dev:sdc1 [ 7.643254] disk 1, o:1, dev:sdd1 [ 7.643256] disk 2, o:1, dev:sde1 [ 7.643258] disk 3, o:1, dev:sdf1 [ 7.643260] disk 4, o:1, dev:sdg1 [ 7.643262] disk 5, o:1, dev:sdh1 [ 7.643264] disk 6, o:1, dev:sdi1 [ 7.643266] disk 7, o:1, dev:sdj1 [ 7.643318] md2: detected capacity change from 0 to 2100474478592 [ 7.644611] md: bind [ 7.644976] md: bind [ 7.646659] md2: unknown partition table [ 7.774416] md: bind [ 7.776633] raid1: raid set md0 active with 2 out of 2 mirrors [ 7.776669] md0: detected capacity change from 0 to 77999308800 [ 7.778234] md0: unknown partition table [ 7.782267] md: bind [ 7.784500] raid0: looking at sda2 [ 7.784503] raid0: comparing sda2(3956608) [ 7.784505] with sda2(3956608) [ 7.784506] raid0: END [ 7.784508] raid0: ==> UNIQUE [ 7.784509] raid0: 1 zones [ 7.784511] raid0: looking at sdb2 [ 7.784513] raid0: comparing sdb2(3956608) [ 7.784514] with sda2(3956608) [ 7.784516] raid0: EQUAL [ 7.784517] raid0: FINAL 1 zones [ 7.784522] raid0: done. [ 7.784524] raid0 : md_size is 7913216 sectors. [ 7.784526] ******* md1 configuration ********* [ 7.784528] zone0=[sda2/sdb2/] [ 7.784531] zone offset=0kb device offset=0kb size=3956608kb [ 7.784533] ********************************** [ 7.784534] [ 7.784545] md1: detected capacity change from 0 to 4051566592 [ 7.786118] md1: unknown partition table [ 7.973876] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 7.974908] SGI XFS Quota Management subsystem [ 8.044469] XFS mounting filesystem md0 [ 8.269016] Starting XFS recovery on filesystem: md0 (logdev: internal) [ 8.378506] Ending XFS recovery on filesystem: md0 (logdev: internal) [ 8.933416] scsi14 : ioc0: LSI53C1030 C0, FwRev=01033010h, Ports=1, MaxQ=222, IRQ=16 [ 10.220451] Adding 3956600k swap on /dev/md1. Priority:-1 extents:1 across:3956600k [ 10.948107] udev: starting version 151 [ 11.620081] XFS mounting filesystem dm-0 [ 12.221140] parport_pc 00:08: reported by Plug and Play ACPI [ 12.221204] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 12.331410] ppdev: user-space parallel port driver [ 12.337175] lp0: using parport0 (interrupt-driven). [ 12.512056] AMD768 RNG detected [ 12.524545] shpchp 0000:00:06.0: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0 [ 12.524552] shpchp 0000:00:06.0: Cannot reserve MMIO region [ 12.524774] shpchp 0000:00:0a.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 12.524778] shpchp 0000:00:0a.0: Cannot reserve MMIO region [ 12.524930] shpchp 0000:00:0b.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 [ 12.524933] shpchp 0000:00:0b.0: Cannot reserve MMIO region [ 12.525101] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.566168] type=1505 audit(1277328513.485:2): operation="profile_load" pid=693 name="/sbin/dhclient3" [ 12.566456] type=1505 audit(1277328513.485:3): operation="profile_load" pid=693 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.566617] type=1505 audit(1277328513.485:4): operation="profile_load" pid=693 name="/usr/lib/connman/scripts/dhclient-script" [ 12.659096] udev: renamed network interface eth2 to eth1 [ 12.689728] Starting XFS recovery on filesystem: dm-0 (logdev: internal) [ 12.708537] udev: renamed network interface eth1_rename to eth0 [ 12.749403] EDAC MC: Ver: 2.1.0 Jun 3 2010 [ 12.762497] Ending XFS recovery on filesystem: dm-0 (logdev: internal) [ 12.786767] vga16fb: initializing [ 12.786773] vga16fb: mapped to 0xffff8800000a0000 [ 12.786853] fb0: VGA16 VGA frame buffer device [ 12.811015] udev: renamed network interface eth0 to eth2 [ 12.819066] EDAC amd64_edac: Ver: 3.2.0 Jun 3 2010 [ 12.822347] ACPI: resource amd756_smbus [0x10e0-0x10ef] conflicts with ACPI region PMIO [0x1000-0x10fe] [ 12.822352] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.832003] ACPI: resource 0000:00:07.2 [0xcc00-0xcc1f] conflicts with ACPI region ECIO [0xcc00-0xcc1f] [ 12.832009] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.836217] EDAC amd64: ECC is enabled by BIOS. [ 12.872962] EDAC amd64: ECC is enabled by BIOS. [ 12.873067] EDAC MC: Rev E or earlier detected [ 12.873167] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2 [ 12.873171] EDAC MC: Rev E or earlier detected [ 12.873228] EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:19.2 [ 12.873258] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 13.306570] tg3 0000:02:09.0: firmware: requesting tigon/tg3_tso.bin [ 13.364106] Console: switching to colour frame buffer device 80x30 [ 13.391336] RPC: Registered udp transport module. [ 13.391341] RPC: Registered tcp transport module. [ 13.391343] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 13.735501] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 13.735608] tg3 0000:02:09.1: firmware: requesting tigon/tg3_tso.bin [ 13.810162] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 14.510985] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 15.259872] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 15.259878] tg3: eth0: Flow control is off for TX and off for RX. [ 15.260693] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.778482] type=1505 audit(1277328516.695:5): operation="profile_replace" pid=1256 name="/sbin/dhclient3" [ 15.778793] type=1505 audit(1277328516.695:6): operation="profile_replace" pid=1256 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.778967] type=1505 audit(1277328516.695:7): operation="profile_replace" pid=1256 name="/usr/lib/connman/scripts/dhclient-script" [ 16.033681] type=1505 audit(1277328516.956:8): operation="profile_load" pid=1263 name="/usr/bin/evince" [ 16.037382] type=1505 audit(1277328516.956:9): operation="profile_load" pid=1263 name="/usr/bin/evince-previewer" [ 16.039657] type=1505 audit(1277328516.956:10): operation="profile_load" pid=1263 name="/usr/bin/evince-thumbnailer" [ 16.131109] type=1505 audit(1277328517.046:11): operation="profile_load" pid=1284 name="/usr/lib/libvirt/virt-aa-helper" [ 17.204333] DLM (built Jun 3 2010 20:52:45) installed [ 17.946466] tg3: eth1: Link is up at 1000 Mbps, full duplex. [ 17.946471] tg3: eth1: Flow control is on for TX and on for RX. [ 17.947272] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready