[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic-pae (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 23:14:23 UTC 2010 (Ubuntu 2.6.32-22.36-generic-pae 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000b9aa1000 (usable) [ 0.000000] BIOS-e820: 00000000b9aa1000 - 00000000b9aa7000 (reserved) [ 0.000000] BIOS-e820: 00000000b9aa7000 - 00000000b9bbc000 (usable) [ 0.000000] BIOS-e820: 00000000b9bbc000 - 00000000b9c0f000 (reserved) [ 0.000000] BIOS-e820: 00000000b9c0f000 - 00000000b9d08000 (usable) [ 0.000000] BIOS-e820: 00000000b9d08000 - 00000000b9f0f000 (reserved) [ 0.000000] BIOS-e820: 00000000b9f0f000 - 00000000b9f19000 (usable) [ 0.000000] BIOS-e820: 00000000b9f19000 - 00000000b9f1f000 (reserved) [ 0.000000] BIOS-e820: 00000000b9f1f000 - 00000000b9f63000 (usable) [ 0.000000] BIOS-e820: 00000000b9f63000 - 00000000b9f9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000b9f9f000 - 00000000b9fe6000 (usable) [ 0.000000] BIOS-e820: 00000000b9fe6000 - 00000000b9fff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000b9fff000 - 00000000ba000000 (usable) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DBFFF uncachable [ 0.000000] DC000-EFFFF write-back [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0FFE40000 mask FFFFC0000 write-protect [ 0.000000] 5 base 0BBE00000 mask FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f400 (usable) [ 0.000000] modified: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000d8000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000b9aa1000 (usable) [ 0.000000] modified: 00000000b9aa1000 - 00000000b9aa7000 (reserved) [ 0.000000] modified: 00000000b9aa7000 - 00000000b9bbc000 (usable) [ 0.000000] modified: 00000000b9bbc000 - 00000000b9c0f000 (reserved) [ 0.000000] modified: 00000000b9c0f000 - 00000000b9d08000 (usable) [ 0.000000] modified: 00000000b9d08000 - 00000000b9f0f000 (reserved) [ 0.000000] modified: 00000000b9f0f000 - 00000000b9f19000 (usable) [ 0.000000] modified: 00000000b9f19000 - 00000000b9f1f000 (reserved) [ 0.000000] modified: 00000000b9f1f000 - 00000000b9f63000 (usable) [ 0.000000] modified: 00000000b9f63000 - 00000000b9f9f000 (ACPI NVS) [ 0.000000] modified: 00000000b9f9f000 - 00000000b9fe6000 (usable) [ 0.000000] modified: 00000000b9fe6000 - 00000000b9fff000 (ACPI data) [ 0.000000] modified: 00000000b9fff000 - 00000000ba000000 (usable) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 00e00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000 [ 0.000000] RAMDISK: 372b1000 - 37fef6d1 [ 0.000000] Allocated new RAMDISK: 00938000 - 016766d1 [ 0.000000] Move RAMDISK from 00000000372b1000 - 0000000037fef6d0 to 00938000 - 016766d0 [ 0.000000] ACPI: RSDP 000f73e0 00024 (v02 DELL ) [ 0.000000] ACPI: XSDT b9ff80e5 0006C (v01 DELL CL09 06040000 LTP 00000000) [ 0.000000] ACPI: FACP b9fe8000 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT b9fe9000 06954 (v02 Intel CANTIGA 06040000 INTL 20060608) [ 0.000000] ACPI: FACS b9f9efc0 00040 [ 0.000000] ACPI: HPET b9ffed06 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG b9ffed3e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: OSFR b9ffed7a 00080 (v01 DELL DELL 06040000 ASL 00000061) [ 0.000000] ACPI: APIC b9ffedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT b9ffee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC b9ffee8a 00176 (v01 DELL CL09 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT b9ff8189 000C1 (v01 BrtRef DD01BRT 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT b9fe7000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 4230MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] node 0 low ram: 00000000 - 379fe000 [ 0.000000] node 0 bootmap 00009000 - 0000ff40 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000092f7d8] TEXT DATA BSS ==> [0000100000 - 000092f7d8] [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #5 [0000930000 - 0000937158] BRK ==> [0000930000 - 0000937158] [ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #7 [0000938000 - 00016766d1] NEW RAMDISK ==> [0000938000 - 00016766d1] [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] [ 0.000000] found SMP MP-table at [c00f74c0] f74c0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[10] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000b9aa1 [ 0.000000] 0: 0x000b9aa7 -> 0x000b9bbc [ 0.000000] 0: 0x000b9c0f -> 0x000b9d08 [ 0.000000] 0: 0x000b9f0f -> 0x000b9f19 [ 0.000000] 0: 0x000b9f1f -> 0x000b9f63 [ 0.000000] 0: 0x000b9f9f -> 0x000b9fe6 [ 0.000000] 0: 0x000b9fff -> 0x000ba000 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1023200 [ 0.000000] free_area_init_node: node 0, pgdat c07d4d20, node_mem_map c1678000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 8461 pages used for memmap [ 0.000000] HighMem zone: 787002 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000d8000 [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at ba000000 (gap: ba000000:46000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 15 pages/cpu @c4000000 s39448 r0 d21992 u1048576 [ 0.000000] pcpu-alloc: s39448 r0 d21992 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1012959 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-22-generic-pae root=/dev/mapper/ubuntu-root ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] allocated 26214400 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000379fe:00140000) [ 0.000000] Memory: 4002284k/5242880k available (4826k kernel code, 89560k reserved, 2211k data, 672k init, 3181852k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc07e0000 - 0xc0888000 ( 672 kB) [ 0.000000] .data : 0xc05b6a5b - 0xc07df7a8 (2211 kB) [ 0.000000] .text : 0xc0100000 - 0xc05b6a5b (4826 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1296.695 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2593.39 BogoMIPS (lpj=5186780) [ 0.004028] Security Framework initialized [ 0.004052] AppArmor: AppArmor initialized [ 0.004061] Mount-cache hash table entries: 512 [ 0.004221] Initializing cgroup subsys ns [ 0.004227] Initializing cgroup subsys cpuacct [ 0.004234] Initializing cgroup subsys memory [ 0.004243] Initializing cgroup subsys devices [ 0.004246] Initializing cgroup subsys freezer [ 0.004250] Initializing cgroup subsys net_cls [ 0.004277] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004281] CPU: L2 cache: 2048K [ 0.004285] CPU: Physical Processor ID: 0 [ 0.004287] CPU: Processor Core ID: 0 [ 0.004292] mce: CPU supports 6 MCE banks [ 0.004304] CPU0: Thermal monitoring enabled (TM2) [ 0.004309] using mwait in idle threads. [ 0.004317] Performance Events: Core2 events, Intel PMU driver. [ 0.004325] ... version: 2 [ 0.004328] ... bit width: 40 [ 0.004330] ... generic registers: 2 [ 0.004333] ... value mask: 000000ffffffffff [ 0.004336] ... max period: 000000007fffffff [ 0.004339] ... fixed-purpose events: 3 [ 0.004342] ... event mask: 0000000700000003 [ 0.004349] Checking 'hlt' instruction... OK. [ 0.024481] ACPI: Core revision 20090903 [ 0.040013] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.040021] ftrace: allocating 22402 entries in 44 pages [ 0.044065] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.044427] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.087530] CPU0: Genuine Intel(R) CPU U4100 @ 1.30GHz stepping 0a [ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 2048K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.172083] CPU1: Genuine Intel(R) CPU U4100 @ 1.30GHz stepping 0a [ 0.172097] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.176024] Brought up 2 CPUs [ 0.176028] Total of 2 processors activated (5186.87 BogoMIPS). [ 0.176748] CPU0 attaching sched-domain: [ 0.176752] domain 0: span 0-1 level MC [ 0.176756] groups: 0 1 [ 0.176765] CPU1 attaching sched-domain: [ 0.176768] domain 0: span 0-1 level MC [ 0.176771] groups: 1 0 [ 0.176897] devtmpfs: initialized [ 0.176897] regulator: core version 0.5 [ 0.176897] Time: 9:09:54 Date: 06/24/10 [ 0.176897] NET: Registered protocol family 16 [ 0.176897] Trying to unpack rootfs image as initramfs... [ 0.176897] EISA bus registered [ 0.176897] ACPI: bus type pci registered [ 0.176897] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.176897] PCI: Not using MMCONFIG. [ 0.176897] PCI: PCI BIOS revision 3.00 entry at 0xfddf2, last bus=38 [ 0.176897] PCI: Using configuration type 1 for base access [ 0.180139] bio: create slab at 0 [ 0.181937] ACPI: EC: Look up EC in DSDT [ 0.186665] ACPI: BIOS _OSI(Linux) query ignored [ 0.194689] ACPI: Interpreter enabled [ 0.194689] ACPI: (supports S0 S3 S4 S5) [ 0.194689] ACPI: Using IOAPIC for interrupt routing [ 0.194689] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.232770] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.232776] PCI: Using MMCONFIG for extended config space [ 0.278945] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.279537] ACPI: No dock devices found. [ 0.280385] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.280518] pci 0000:00:02.0: reg 10 64bit mmio: [0xf0000000-0xf03fffff] [ 0.280529] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.280537] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] [ 0.280596] pci 0000:00:02.1: reg 10 64bit mmio: [0xf0400000-0xf04fffff] [ 0.280740] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] [ 0.280846] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] [ 0.280957] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf0904800-0xf0904bff] [ 0.281037] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.281044] pci 0000:00:1a.7: PME# disabled [ 0.281109] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0700000-0xf0703fff] [ 0.281177] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.281183] pci 0000:00:1b.0: PME# disabled [ 0.281288] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.281294] pci 0000:00:1c.0: PME# disabled [ 0.281402] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.281409] pci 0000:00:1c.1: PME# disabled [ 0.281522] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] [ 0.281641] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] [ 0.281750] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] [ 0.281857] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0904c00-0xf0904fff] [ 0.281937] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.281945] pci 0000:00:1d.7: PME# disabled [ 0.282232] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f] [ 0.282243] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f] [ 0.282253] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817] [ 0.282262] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b] [ 0.282272] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df] [ 0.282281] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0904000-0xf09047ff] [ 0.282336] pci 0000:00:1f.2: PME# supported from D3hot [ 0.282342] pci 0000:00:1f.2: PME# disabled [ 0.282389] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] [ 0.282413] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff] [ 0.282528] pci 0000:02:00.0: reg 10 64bit mmio: [0xf0500000-0xf053ffff] [ 0.282541] pci 0000:02:00.0: reg 18 io port: [0x2000-0x207f] [ 0.282634] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.282641] pci 0000:02:00.0: PME# disabled [ 0.282724] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.282730] pci 0000:00:1c.0: bridge 32bit mmio: [0xf0500000-0xf05fffff] [ 0.283107] pci 0000:08:00.0: reg 10 64bit mmio: [0xf0600000-0xf0603fff] [ 0.283335] pci 0000:08:00.0: supports D1 D2 [ 0.283338] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.283351] pci 0000:08:00.0: PME# disabled [ 0.283499] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0600000-0xf06fffff] [ 0.283590] pci 0000:00:1e.0: transparent bridge [ 0.283627] pci_bus 0000:00: on NUMA node 0 [ 0.283636] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.283873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.284040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.284150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.303521] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.303685] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.303843] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 0.304010] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.304169] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.304331] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 0.304487] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.304643] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.304800] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.304820] vgaarb: loaded [ 0.304987] SCSI subsystem initialized [ 0.305104] libata version 3.00 loaded. [ 0.305211] usbcore: registered new interface driver usbfs [ 0.305230] usbcore: registered new interface driver hub [ 0.305268] usbcore: registered new device driver usb [ 0.305483] ACPI: WMI: Mapper loaded [ 0.305486] PCI: Using ACPI for IRQ routing [ 0.307868] NetLabel: Initializing [ 0.307872] NetLabel: domain hash size = 128 [ 0.307874] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.307892] NetLabel: unlabeled traffic allowed by default [ 0.307944] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.307953] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.316013] Switching to clocksource tsc [ 0.319486] AppArmor: AppArmor Filesystem Enabled [ 0.319503] pnp: PnP ACPI init [ 0.319518] ACPI: bus type pnp registered [ 0.340581] pnp: PnP ACPI: found 9 devices [ 0.340585] ACPI: ACPI bus type pnp unregistered [ 0.340591] PnPBIOS: Disabled by ACPI PNP [ 0.340611] system 00:02: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.340623] system 00:04: ioport range 0x480-0x48f has been reserved [ 0.340628] system 00:04: ioport range 0xffff-0xffff has been reserved [ 0.340632] system 00:04: ioport range 0xffff-0xffff has been reserved [ 0.340637] system 00:04: ioport range 0x400-0x47f has been reserved [ 0.340641] system 00:04: ioport range 0x1180-0x11ff has been reserved [ 0.340646] system 00:04: ioport range 0xfe00-0xfe00 has been reserved [ 0.340650] system 00:04: ioport range 0xff2c-0xff7f has been reserved [ 0.340661] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.340666] system 00:08: iomem range 0xfed10000-0xfed13fff has been reserved [ 0.340671] system 00:08: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.340675] system 00:08: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.340680] system 00:08: iomem range 0xe0000000-0xefffffff has been reserved [ 0.340685] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.340690] system 00:08: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.375539] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.375546] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.375555] pci 0000:00:1c.0: MEM window: 0xf0500000-0xf05fffff [ 0.375562] pci 0000:00:1c.0: PREFETCH window: 0x000000bc000000-0x000000bc1fffff [ 0.375572] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:08 [ 0.375577] pci 0000:00:1c.1: IO window: 0x3000-0x3fff [ 0.375585] pci 0000:00:1c.1: MEM window: 0xf0600000-0xf06fffff [ 0.375591] pci 0000:00:1c.1: PREFETCH window: 0x000000bc200000-0x000000bc3fffff [ 0.375602] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:26 [ 0.375605] pci 0000:00:1e.0: IO window: disabled [ 0.375612] pci 0000:00:1e.0: MEM window: disabled [ 0.375618] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.375645] alloc irq_desc for 17 on node -1 [ 0.375648] alloc kstat_irqs on node -1 [ 0.375657] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.375665] pci 0000:00:1c.0: setting latency timer to 64 [ 0.375677] alloc irq_desc for 16 on node -1 [ 0.375680] alloc kstat_irqs on node -1 [ 0.375685] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.375692] pci 0000:00:1c.1: setting latency timer to 64 [ 0.375702] pci 0000:00:1e.0: setting latency timer to 64 [ 0.375709] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.375712] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.375717] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] [ 0.375720] pci_bus 0000:02: resource 1 mem: [0xf0500000-0xf05fffff] [ 0.375725] pci_bus 0000:02: resource 2 pref mem [0xbc000000-0xbc1fffff] [ 0.375729] pci_bus 0000:08: resource 0 io: [0x3000-0x3fff] [ 0.375732] pci_bus 0000:08: resource 1 mem: [0xf0600000-0xf06fffff] [ 0.375736] pci_bus 0000:08: resource 2 pref mem [0xbc200000-0xbc3fffff] [ 0.375740] pci_bus 0000:26: resource 3 io: [0x00-0xffff] [ 0.375744] pci_bus 0000:26: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.375798] NET: Registered protocol family 2 [ 0.375945] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.376419] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.377002] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.377288] TCP: Hash tables configured (established 131072 bind 65536) [ 0.377291] TCP reno registered [ 0.377415] NET: Registered protocol family 1 [ 0.377447] pci 0000:00:02.0: Boot video device [ 0.377640] Simple Boot Flag at 0x36 set to 0x1 [ 0.377884] cpufreq-nforce2: No nForce2 chipset. [ 0.377924] Scanning for low memory corruption every 60 seconds [ 0.378095] audit: initializing netlink socket (disabled) [ 0.378110] type=2000 audit(1277370593.374:1): initialized [ 0.394736] highmem bounce pool size: 64 pages [ 0.394744] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.396956] VFS: Disk quotas dquot_6.5.2 [ 0.397045] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.397899] fuse init (API version 7.13) [ 0.398027] msgmni has been set to 1604 [ 0.398321] alg: No test for stdrng (krng) [ 0.398398] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.398403] io scheduler noop registered [ 0.398406] io scheduler anticipatory registered [ 0.398409] io scheduler deadline registered [ 0.398468] io scheduler cfq registered (default) [ 0.398685] alloc irq_desc for 24 on node -1 [ 0.398688] alloc kstat_irqs on node -1 [ 0.398703] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.398718] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.398933] alloc irq_desc for 25 on node -1 [ 0.398936] alloc kstat_irqs on node -1 [ 0.398947] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.398961] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.399096] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.399232] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.399424] ACPI: AC Adapter [ACAD] (on-line) [ 0.399547] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.399617] ACPI: Lid Switch [LID0] [ 0.399680] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.399684] ACPI: Power Button [PWRB] [ 0.399750] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.399754] ACPI: Power Button [PWRF] [ 0.400942] ACPI: SSDT b9f1aca0 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.401742] ACPI: SSDT b9f19620 005C5 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.402767] Monitor-Mwait will be used to enter C-1 state [ 0.402805] Monitor-Mwait will be used to enter C-2 state [ 0.402837] Monitor-Mwait will be used to enter C-3 state [ 0.402845] Marking TSC unstable due to TSC halts in idle [ 0.402934] processor LNXCPU:00: registered as cooling_device0 [ 0.403590] ACPI: SSDT b9f1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624) [ 0.404217] ACPI: SSDT b9f1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) [ 0.405287] Switching to clocksource hpet [ 0.417084] processor LNXCPU:01: registered as cooling_device1 [ 0.440732] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.442697] brd: module loaded [ 0.443388] loop: module loaded [ 0.443515] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.444182] Fixed MDIO Bus: probed [ 0.444232] PPP generic driver version 2.4.2 [ 0.444283] tun: Universal TUN/TAP device driver, 1.6 [ 0.444285] tun: (C) 1999-2004 Max Krasnyansky [ 0.444409] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.444446] alloc irq_desc for 19 on node -1 [ 0.444449] alloc kstat_irqs on node -1 [ 0.444458] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 0.444476] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.444482] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.444538] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.444576] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.448475] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.448527] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0904800 [ 0.452422] isapnp: Scanning for PnP cards... [ 0.501616] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.501775] usb usb1: configuration #1 chosen from 1 choice [ 0.501819] hub 1-0:1.0: USB hub found [ 0.501835] hub 1-0:1.0: 4 ports detected [ 0.501922] alloc irq_desc for 23 on node -1 [ 0.501925] alloc kstat_irqs on node -1 [ 0.501934] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.501960] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.501965] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.502015] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.502052] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.505936] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.505959] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0904c00 [ 0.553449] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.553630] usb usb2: configuration #1 chosen from 1 choice [ 0.553714] hub 2-0:1.0: USB hub found [ 0.553726] hub 2-0:1.0: 6 ports detected [ 0.553881] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.553953] uhci_hcd: USB Universal Host Controller Interface driver [ 0.554005] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.554015] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.554021] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.554073] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.554118] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 [ 0.554244] usb usb3: configuration #1 chosen from 1 choice [ 0.554281] hub 3-0:1.0: USB hub found [ 0.554292] hub 3-0:1.0: 2 ports detected [ 0.554361] alloc irq_desc for 21 on node -1 [ 0.554364] alloc kstat_irqs on node -1 [ 0.554372] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.554383] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.554436] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.554524] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.554611] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 [ 0.554738] usb usb4: configuration #1 chosen from 1 choice [ 0.554775] hub 4-0:1.0: USB hub found [ 0.554784] hub 4-0:1.0: 2 ports detected [ 0.554847] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.554856] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.554861] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.554910] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 0.554943] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 [ 0.555072] usb usb5: configuration #1 chosen from 1 choice [ 0.555119] hub 5-0:1.0: USB hub found [ 0.555127] hub 5-0:1.0: 2 ports detected [ 0.555189] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.555197] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.555202] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.555246] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 0.555278] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 [ 0.555445] usb usb6: configuration #1 chosen from 1 choice [ 0.555529] hub 6-0:1.0: USB hub found [ 0.555544] hub 6-0:1.0: 2 ports detected [ 0.555606] alloc irq_desc for 18 on node -1 [ 0.555609] alloc kstat_irqs on node -1 [ 0.555618] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.555626] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.555631] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.555676] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 0.555716] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 [ 0.555842] usb usb7: configuration #1 chosen from 1 choice [ 0.555879] hub 7-0:1.0: USB hub found [ 0.555888] hub 7-0:1.0: 2 ports detected [ 0.556043] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.579591] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.579603] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.579898] mice: PS/2 mouse device common for all mice [ 0.581367] rtc_cmos 00:05: RTC can wake from S4 [ 0.581424] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.581467] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.581718] device-mapper: uevent: version 1.0.3 [ 0.589134] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.637358] device-mapper: multipath: version 1.1.0 loaded [ 0.637364] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.645197] EISA: Probing bus 0 at eisa.0 [ 0.645208] Cannot allocate resource for EISA slot 1 [ 0.645212] Cannot allocate resource for EISA slot 2 [ 0.645215] Cannot allocate resource for EISA slot 3 [ 0.645244] EISA: Detected 0 cards. [ 0.653145] cpuidle: using governor ladder [ 0.653320] cpuidle: using governor menu [ 0.654028] TCP cubic registered [ 0.654264] NET: Registered protocol family 10 [ 0.654960] lo: Disabled Privacy Extensions [ 0.655480] NET: Registered protocol family 17 [ 0.669845] Using IPI No-Shortcut mode [ 0.669964] PM: Resume from disk failed. [ 0.669981] registered taskstats version 1 [ 0.670783] Magic number: 14:372:172 [ 0.670879] rtc_cmos 00:05: setting system clock to 2010-06-24 09:09:54 UTC (1277370594) [ 0.670883] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.670886] EDD information not available. [ 0.679888] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.726839] Freeing initrd memory: 13561k freed [ 0.844096] isapnp: No Plug & Play device found [ 0.844138] Freeing unused kernel memory: 672k freed [ 0.844826] Write protecting the kernel text: 4828k [ 0.844966] Write protecting the kernel read-only data: 1876k [ 0.872074] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 0.873024] udev: starting version 151 [ 0.907067] ACPI: Battery Slot [BAT1] (battery present) [ 0.971897] ahci 0000:00:1f.2: version 3.0 [ 0.971920] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.971976] alloc irq_desc for 26 on node -1 [ 0.971979] alloc kstat_irqs on node -1 [ 0.971994] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X [ 0.972090] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x1 impl SATA mode [ 0.972095] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs [ 0.972103] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.972306] Linux agpgart interface v0.103 [ 0.996979] scsi0 : ahci [ 1.008824] scsi1 : ahci [ 1.029919] scsi2 : ahci [ 1.040586] scsi3 : ahci [ 1.040692] ata1: SATA max UDMA/133 abar m2048@0xf0904000 port 0xf0904100 irq 26 [ 1.040696] ata2: DUMMY [ 1.040698] ata3: DUMMY [ 1.040700] ata4: DUMMY [ 1.040771] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset [ 1.041984] agpgart-intel 0000:00:00.0: detected 65532K stolen memory [ 1.055077] usb 1-2: configuration #1 chosen from 1 choice [ 1.081500] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.107212] [drm] Initialized drm 1.1.0 20060810 [ 1.168086] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 1.311456] usb 1-3: configuration #1 chosen from 1 choice [ 1.325382] Initializing USB Mass Storage driver... [ 1.325559] scsi4 : SCSI emulation for USB Mass Storage devices [ 1.325677] usbcore: registered new interface driver usb-storage [ 1.325681] USB Mass Storage support registered. [ 1.325689] usb-storage: device found at 3 [ 1.325691] usb-storage: waiting for device to settle before scanning [ 1.524081] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.571331] ata1.00: ATA-8: TOSHIBA MK3265GSX, GJ002D, max UDMA/100 [ 1.571336] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.572264] ata1.00: configured for UDMA/100 [ 1.588214] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3265GS GJ00 PQ: 0 ANSI: 5 [ 1.588426] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.588480] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.588575] sd 0:0:0:0: [sda] Write Protect is off [ 1.588579] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.588635] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.588822] sda: [ 1.632070] usb 5-2: new low speed USB device using uhci_hcd and address 2 [ 1.634833] sda1 sda2 sda3 sda4 [ 1.635262] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.670038] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.670045] i915 0000:00:02.0: setting latency timer to 64 [ 1.683310] alloc irq_desc for 27 on node -1 [ 1.683314] alloc kstat_irqs on node -1 [ 1.683326] i915 0000:00:02.0: irq 27 for MSI/MSI-X [ 1.683335] [drm] set up 63M of stolen space [ 1.867122] usb 5-2: configuration #1 chosen from 1 choice [ 1.896649] usbcore: registered new interface driver hiddev [ 1.911359] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input5 [ 1.911493] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.0-2/input0 [ 1.911529] usbcore: registered new interface driver usbhid [ 1.911533] usbhid: v2.6:USB HID core driver [ 2.368887] fb0: inteldrmfb frame buffer device [ 2.368891] registered panic notifier [ 2.371353] acpi device:07: registered as cooling_device2 [ 2.371682] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6 [ 2.371732] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.371767] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.374509] vga16fb: initializing [ 2.374513] vga16fb: mapped to 0xc00a0000 [ 2.374518] vga16fb: not registering due to another framebuffer present [ 2.746387] Console: switching to colour frame buffer device 170x48 [ 6.324376] usb-storage: device scan complete [ 6.326544] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 6.327423] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 6.332210] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 13.223315] EXT4-fs (dm-2): mounted filesystem with ordered data mode [ 28.150204] udev: starting version 151 [ 28.203149] lp: driver loaded but no devices found [ 28.209755] Adding 1331192k swap on /dev/mapper/ubuntu-swap. Priority:-1 extents:1 across:1331192k [ 28.628618] kjournald starting. Commit interval 5 seconds [ 28.628767] EXT3 FS on sda3, internal journal [ 28.628778] EXT3-fs: mounted filesystem with ordered data mode. [ 29.015678] lib80211: common routines for IEEE802.11 drivers [ 29.015683] lib80211_crypt: registered algorithm 'NULL' [ 29.065161] wl: module license 'MIXED/Proprietary' taints kernel. [ 29.065167] Disabling lock debugging due to kernel taint [ 29.104433] atl1c 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 29.104455] atl1c 0000:02:00.0: setting latency timer to 64 [ 29.104944] wl 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 29.104959] wl 0000:08:00.0: setting latency timer to 64 [ 29.110147] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 29.111933] compal-laptop: Identified laptop model 'Dell Inspiron 11z'. [ 29.114611] compal-laptop: driver 0.2.6 successfully loaded. [ 29.117198] dell-laptop: Blacklisted hardware detected - not loading [ 29.161317] Linux video capture interface: v2.00 [ 29.171887] lib80211_crypt: registered algorithm 'TKIP' [ 29.176994] eth0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.60.48.36 [ 29.177535] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6410) [ 29.178141] input: Dell WMI hotkeys as /devices/virtual/input/input7 [ 29.192885] udev: renamed network interface eth0 to eth1 [ 29.217280] atl1c 0000:02:00.0: version 1.0.0.1-NAPI [ 29.223363] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8 [ 29.223445] usbcore: registered new interface driver uvcvideo [ 29.223452] USB Video Class driver (v0.1.0) [ 29.298032] type=1505 audit(1277363423.126:2): operation="profile_load" pid=785 name="/sbin/dhclient3" [ 29.299077] type=1505 audit(1277363423.126:3): operation="profile_load" pid=785 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 29.299637] type=1505 audit(1277363423.126:4): operation="profile_load" pid=785 name="/usr/lib/connman/scripts/dhclient-script" [ 29.373415] alloc irq_desc for 22 on node -1 [ 29.373420] alloc kstat_irqs on node -1 [ 29.373430] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 29.373492] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 29.460765] type=1505 audit(1277363423.286:5): operation="profile_load" pid=953 name="/usr/share/gdm/guest-session/Xsession" [ 29.463419] type=1505 audit(1277363423.290:6): operation="profile_replace" pid=954 name="/sbin/dhclient3" [ 29.464473] type=1505 audit(1277363423.290:7): operation="profile_replace" pid=954 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 29.465098] type=1505 audit(1277363423.294:8): operation="profile_replace" pid=954 name="/usr/lib/connman/scripts/dhclient-script" [ 29.470170] type=1505 audit(1277363423.298:9): operation="profile_load" pid=955 name="/usr/bin/evince" [ 29.483858] type=1505 audit(1277363423.310:10): operation="profile_load" pid=955 name="/usr/bin/evince-previewer" [ 29.493449] type=1505 audit(1277363423.322:11): operation="profile_load" pid=955 name="/usr/bin/evince-thumbnailer" [ 29.502804] hda_codec: ALC272: BIOS auto-probing. [ 29.504770] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 29.530132] alloc irq_desc for 28 on node -1 [ 29.530137] alloc kstat_irqs on node -1 [ 29.530160] atl1c 0000:02:00.0: irq 28 for MSI/MSI-X [ 29.530740] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 30.149339] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xa40000 [ 30.235407] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10 [ 31.998954] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 31.999236] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 33.569308] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 33.569314] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 33.569316] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 33.569318] vboxdrv: the usage of hardware performance counters by [ 33.569320] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 33.569325] vboxdrv: Found 2 processor cores. [ 33.570383] vboxdrv: fAsync=0 offMin=0x1a0 offMax=0x12dd [ 33.571590] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 33.571595] vboxdrv: Successfully loaded version 3.2.4 (interface 0x00140001). [ 34.002873] ppdev: user-space parallel port driver [ 40.492109] eth1: no IPv6 routers present [ 42.272131] eth0: no IPv6 routers present [ 549.877410] PM: Syncing filesystems ... done. [ 549.969103] PM: Preparing system for mem sleep [ 549.969108] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 549.970372] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 549.970431] PM: Entering mem sleep [ 549.970446] Suspending console(s) (use no_console_suspend to debug) [ 549.988454] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 549.988561] sd 0:0:0:0: [sda] Stopping disk [ 550.650992] PM: suspend of drv:sd dev:0:0:0:0 complete after 662.538 msecs [ 551.116651] PM: suspend of drv:psmouse dev:serio1 complete after 436.479 msecs [ 551.220284] ACPI handle has no context! [ 551.220742] wl 0000:08:00.0: PCI INT A disabled [ 551.236417] atl1c 0000:02:00.0: PCI INT A disabled [ 551.284132] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 551.284145] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 551.284162] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 551.284173] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 551.492180] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 551.508104] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 223.914 msecs [ 551.508116] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 551.508128] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 551.508140] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 551.612104] PM: suspend of drv:i915 dev:0000:00:02.0 complete after 103.950 msecs [ 551.612373] PM: suspend of devices complete after 1641.492 msecs [ 551.612377] PM: suspend devices took 1.644 seconds [ 551.644262] PM: late suspend of devices complete after 31.879 msecs [ 551.644793] ACPI: Preparing to enter system sleep state S3 [ 551.740015] Disabling non-boot CPUs ... [ 551.740038] CPU0 attaching NULL sched-domain. [ 551.740043] CPU1 attaching NULL sched-domain. [ 551.804018] CPU0 attaching NULL sched-domain. [ 551.805191] Breaking affinity for irq 19 [ 551.805200] Breaking affinity for irq 22 [ 551.805243] Breaking affinity for irq 27 [ 551.805251] Breaking affinity for irq 28 [ 551.908025] CPU 1 is now offline [ 551.908028] SMP alternatives: switching to UP code [ 551.919380] Extended CMOS year: 2000 [ 551.919380] Back to C! [ 551.919380] CPU0: Thermal monitoring enabled (TM2) [ 551.919380] Extended CMOS year: 2000 [ 551.919380] Enabling non-boot CPUs ... [ 551.919380] SMP alternatives: switching to SMP code [ 551.930092] Booting processor 1 APIC 0x1 ip 0x6000 [ 551.918750] Initializing CPU#1 [ 551.918750] CPU: L1 I cache: 32K, L1 D cache: 32K [ 551.918750] CPU: L2 cache: 2048K [ 551.918750] CPU: Physical Processor ID: 0 [ 551.918750] CPU: Processor Core ID: 1 [ 551.918750] CPU1: Thermal monitoring enabled (TM2) [ 552.020052] CPU1: Genuine Intel(R) CPU U4100 @ 1.30GHz stepping 0a [ 552.020129] CPU0 attaching NULL sched-domain. [ 552.048021] CPU0 attaching sched-domain: [ 552.048025] domain 0: span 0-1 level MC [ 552.048029] groups: 0 1 [ 552.048035] CPU1 attaching sched-domain: [ 552.048038] domain 0: span 0-1 level MC [ 552.048041] groups: 1 0 [ 552.048634] CPU1 is up [ 552.049414] ACPI: Waking up from system sleep state S3 [ 552.116121] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 552.116140] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 552.116265] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 552.116396] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 552.116531] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 552.116676] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 552.116804] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 552.116831] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 552.116840] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 552.116972] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b) [ 552.116988] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xbc11bc01) [ 552.116996] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf050f050) [ 552.117004] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020) [ 552.117017] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 552.117026] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 552.117171] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x4020b) [ 552.117187] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xbc31bc21) [ 552.117196] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030) [ 552.117208] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 552.117217] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 552.117378] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 552.117513] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 552.117649] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 552.117793] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 552.117911] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff) [ 552.117927] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 552.117934] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 552.117942] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [ 552.117958] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 552.118222] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 552.118252] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 552.118403] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x4, writing 0xbc400004) [ 552.118534] atl1c 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 552.118550] atl1c 0000:02:00.0: restoring config space at offset 0xb (was 0x10621969, writing 0x4091028) [ 552.118568] atl1c 0000:02:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001) [ 552.118579] atl1c 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0500004) [ 552.118588] atl1c 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 552.118599] atl1c 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 552.119066] wl 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 552.119132] wl 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0600004) [ 552.119145] wl 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 552.119164] wl 0000:08:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [ 552.149824] PM: early resume of devices complete after 41.642 msecs [ 552.398209] PM: resume of drv:battery dev:PNP0C0A:00 complete after 245.361 msecs [ 552.438237] i915 0000:00:02.0: setting latency timer to 64 [ 552.580253] PM: resume of drv:i915 dev:0000:00:02.0 complete after 142.068 msecs [ 552.580440] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 552.580449] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 552.580477] usb usb3: root hub lost power or was reset [ 552.580586] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 552.580594] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 552.580622] usb usb4: root hub lost power or was reset [ 552.580731] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 552.580739] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 552.580851] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 552.580860] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 552.581153] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 552.581161] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 552.581188] usb usb5: root hub lost power or was reset [ 552.581307] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 552.581315] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 552.581341] usb usb6: root hub lost power or was reset [ 552.581449] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 552.581457] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 552.581484] usb usb7: root hub lost power or was reset [ 552.581592] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 552.581600] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 552.581714] pci 0000:00:1e.0: setting latency timer to 64 [ 552.581902] ahci 0000:00:1f.2: setting latency timer to 64 [ 552.656482] wl 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 552.656496] wl 0000:08:00.0: setting latency timer to 64 [ 552.804109] PM: resume of drv:usb dev:usb1 complete after 131.993 msecs [ 552.952121] PM: resume of drv:usb dev:usb2 complete after 147.606 msecs [ 553.200103] PM: resume of drv:usb dev:usb5 complete after 246.699 msecs [ 553.320107] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 553.507101] PM: resume of drv:usb dev:1-2 complete after 298.171 msecs [ 553.616106] usb 1-3: reset high speed USB device using ehci_hcd and address 3 [ 553.736049] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 553.737644] ata1.00: configured for UDMA/100 [ 553.755852] PM: resume of drv:usb dev:1-3 complete after 248.260 msecs [ 553.756571] sd 0:0:0:0: [sda] Starting disk [ 554.044102] usb 5-2: reset low speed USB device using uhci_hcd and address 2 [ 554.351153] PM: resume of drv:usb dev:5-2 complete after 565.068 msecs [ 554.359874] PM: resume of devices complete after 2209.906 msecs [ 554.360148] PM: resume devices took 2.212 seconds [ 554.360191] PM: Finishing wakeup. [ 554.360193] Restarting tasks ... done. [ 554.879989] atl1c 0000:02:00.0: irq 28 for MSI/MSI-X [ 554.880455] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 555.469215] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 555.469526] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 565.321111] eth1: no IPv6 routers present [ 565.937110] eth0: no IPv6 routers present [ 580.085436] PM: Syncing filesystems ... done. [ 580.329094] PM: Preparing system for mem sleep [ 580.329100] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 580.330209] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 580.330266] PM: Entering mem sleep [ 580.330280] Suspending console(s) (use no_console_suspend to debug) [ 580.348153] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 580.348273] sd 0:0:0:0: [sda] Stopping disk [ 580.991290] PM: suspend of drv:sd dev:0:0:0:0 complete after 643.138 msecs [ 581.458012] PM: suspend of drv:psmouse dev:serio1 complete after 437.833 msecs [ 581.560141] PM: suspend of drv:atkbd dev:serio0 complete after 102.122 msecs [ 581.562690] ACPI handle has no context! [ 581.563150] wl 0000:08:00.0: PCI INT A disabled [ 581.624124] ehci_hcd 0000:00:1d.7: PCI INT A disabled [ 581.624137] uhci_hcd 0000:00:1d.2: PCI INT C disabled [ 581.624148] uhci_hcd 0000:00:1d.1: PCI INT B disabled [ 581.624166] uhci_hcd 0000:00:1d.0: PCI INT A disabled [ 581.728726] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 581.744114] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 119.931 msecs [ 581.744125] ehci_hcd 0000:00:1a.7: PCI INT C disabled [ 581.744137] uhci_hcd 0000:00:1a.1: PCI INT B disabled [ 581.744149] uhci_hcd 0000:00:1a.0: PCI INT A disabled [ 581.780351] PM: suspend of devices complete after 1449.647 msecs [ 581.780355] PM: suspend devices took 1.452 seconds [ 581.812258] PM: late suspend of devices complete after 31.896 msecs [ 581.812773] ACPI: Preparing to enter system sleep state S3 [ 581.908017] Disabling non-boot CPUs ... [ 581.908040] CPU0 attaching NULL sched-domain. [ 581.908044] CPU1 attaching NULL sched-domain. [ 581.972020] CPU0 attaching NULL sched-domain. [ 582.076055] CPU 1 is now offline [ 582.076059] SMP alternatives: switching to UP code [ 582.087328] Extended CMOS year: 2000 [ 582.087328] Back to C! [ 582.087328] CPU0: Thermal monitoring enabled (TM2) [ 582.087328] Extended CMOS year: 2000 [ 582.087328] Enabling non-boot CPUs ... [ 582.087328] SMP alternatives: switching to SMP code [ 582.098044] Booting processor 1 APIC 0x1 ip 0x6000 [ 582.086757] Initializing CPU#1 [ 582.086757] CPU: L1 I cache: 32K, L1 D cache: 32K [ 582.086757] CPU: L2 cache: 2048K [ 582.086757] CPU: Physical Processor ID: 0 [ 582.086757] CPU: Processor Core ID: 1 [ 582.086757] CPU1: Thermal monitoring enabled (TM2) [ 582.188057] CPU1: Genuine Intel(R) CPU U4100 @ 1.30GHz stepping 0a [ 582.188129] CPU0 attaching NULL sched-domain. [ 582.216023] CPU0 attaching sched-domain: [ 582.216027] domain 0: span 0-1 level MC [ 582.216031] groups: 0 1 [ 582.216037] CPU1 attaching sched-domain: [ 582.216040] domain 0: span 0-1 level MC [ 582.216043] groups: 1 0 [ 582.216640] CPU1 is up [ 582.217420] ACPI: Waking up from system sleep state S3 [ 582.284085] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 582.284103] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407) [ 582.284229] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007) [ 582.284359] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 582.284495] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 582.284639] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 582.284768] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 582.284795] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 582.284804] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 582.284937] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x40100, writing 0x4010b) [ 582.284953] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xbc11bc01) [ 582.284960] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xf050f050) [ 582.284967] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x20002020) [ 582.284980] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 582.284988] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 582.285136] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x40200, writing 0x4020b) [ 582.285152] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0xbc31bc21) [ 582.285161] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x20000000, writing 0x20003030) [ 582.285173] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 582.285182] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100407) [ 582.285343] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 582.285478] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 582.285613] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [ 582.285757] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002) [ 582.285875] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x40000, writing 0x400ff) [ 582.285891] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 582.285898] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 582.285906] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [ 582.285922] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 582.286185] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 582.286214] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 582.286365] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x4, writing 0xbc400004) [ 582.286496] atl1c 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 582.286524] atl1c 0000:02:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001) [ 582.286535] atl1c 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0500004) [ 582.286543] atl1c 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 582.286554] atl1c 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 582.287020] wl 0000:08:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [ 582.287086] wl 0000:08:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf0600004) [ 582.287099] wl 0000:08:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 582.287119] wl 0000:08:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) [ 582.317661] PM: early resume of devices complete after 41.482 msecs [ 582.570785] PM: resume of drv:battery dev:PNP0C0A:00 complete after 250.095 msecs [ 582.610799] i915 0000:00:02.0: setting latency timer to 64 [ 582.752261] PM: resume of drv:i915 dev:0000:00:02.0 complete after 141.513 msecs [ 582.752447] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 582.752456] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 582.752484] usb usb3: root hub lost power or was reset [ 582.752594] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 582.752602] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 582.752631] usb usb4: root hub lost power or was reset [ 582.752738] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 582.752746] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 582.752859] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 582.752868] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 582.753158] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 582.753166] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 582.753193] usb usb5: root hub lost power or was reset [ 582.753311] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 582.753320] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 582.753348] usb usb6: root hub lost power or was reset [ 582.753455] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 582.753463] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 582.753491] usb usb7: root hub lost power or was reset [ 582.753598] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 582.753606] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 582.753720] pci 0000:00:1e.0: setting latency timer to 64 [ 582.753908] ahci 0000:00:1f.2: setting latency timer to 64 [ 582.828489] wl 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 582.828503] wl 0000:08:00.0: setting latency timer to 64 [ 582.992097] PM: resume of drv:usb dev:usb1 complete after 130.334 msecs [ 583.140129] PM: resume of drv:usb dev:usb2 complete after 147.627 msecs [ 583.388119] PM: resume of drv:usb dev:usb5 complete after 246.710 msecs [ 583.508113] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 583.695308] PM: resume of drv:usb dev:1-2 complete after 298.003 msecs [ 583.804108] usb 1-3: reset high speed USB device using ehci_hcd and address 3 [ 583.908116] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 583.909896] ata1.00: configured for UDMA/100 [ 583.943916] PM: resume of drv:usb dev:1-3 complete after 248.121 msecs [ 583.944635] sd 0:0:0:0: [sda] Starting disk [ 584.228110] usb 5-2: reset low speed USB device using uhci_hcd and address 2 [ 584.535848] PM: resume of drv:usb dev:5-2 complete after 565.521 msecs [ 584.544512] PM: resume of devices complete after 2226.705 msecs [ 584.544770] PM: resume devices took 2.228 seconds [ 584.544812] PM: Finishing wakeup. [ 584.544814] Restarting tasks ... done. [ 584.822347] atl1c 0000:02:00.0: irq 28 for MSI/MSI-X [ 584.822807] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 585.634563] atl1c 0000:02:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> [ 585.634869] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 595.672123] eth1: no IPv6 routers present [ 596.305111] eth0: no IPv6 routers present