[ 8807.793738] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[ 8807.793774] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[ 8807.794395] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[ 8807.794416] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[ 8807.794420] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[ 8807.794438] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[ 8807.794455] pci 0000:00:00.0: no hotplug settings from platform
[ 8807.794460] pci 0000:00:00.0: using default PCI settings
[ 8807.794497] pci 0000:00:01.0: no hotplug settings from platform
[ 8807.794498] pci 0000:00:01.0: using default PCI settings
[ 8807.794538] ata_piix 0000:00:01.1: no hotplug settings from platform
[ 8807.794539] ata_piix 0000:00:01.1: using default PCI settings
[ 8807.794578] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[ 8807.794580] uhci_hcd 0000:00:01.2: using default PCI settings
[ 8807.794619] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[ 8807.794620] piix4_smbus 0000:00:01.3: using default PCI settings
[ 8807.794656] pci 0000:00:02.0: no hotplug settings from platform
[ 8807.794657] pci 0000:00:02.0: using default PCI settings
[ 8807.807304] e1000 0000:00:03.0: no hotplug settings from platform
[ 8807.807316] e1000 0000:00:03.0: using default PCI settings
[ 8807.807367] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[ 8807.807369] sym53c8xx 0000:00:04.0: using default PCI settings
[ 8807.807418] pci 0000:00:05.0: no hotplug settings from platform
[ 8807.807420] pci 0000:00:05.0: using default PCI settings
[ 8807.821208] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[ 8807.822256] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 8807.822282] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[ 8807.822348] virtio-pci 0000:00:05.0: setting latency timer to 64
[ 8807.822669]   alloc irq_desc for 24 on node -1
[ 8807.822674]   alloc kstat_irqs on node -1
[ 8807.822712] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[ 8807.822718]   alloc irq_desc for 25 on node -1
[ 8807.822719]   alloc kstat_irqs on node -1
[ 8807.822738] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[ 8807.824067]  vda: unknown partition table
[ 9541.931986] virtio-pci 0000:00:05.0: PCI INT A disabled
[ 9581.726373] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[ 9581.726410] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[ 9581.726872] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[ 9581.726893] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[ 9581.726897] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[ 9581.726916] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[ 9581.726922] pci 0000:00:00.0: no hotplug settings from platform
[ 9581.726925] pci 0000:00:00.0: using default PCI settings
[ 9581.726982] pci 0000:00:01.0: no hotplug settings from platform
[ 9581.726984] pci 0000:00:01.0: using default PCI settings
[ 9581.727023] ata_piix 0000:00:01.1: no hotplug settings from platform
[ 9581.727025] ata_piix 0000:00:01.1: using default PCI settings
[ 9581.727065] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[ 9581.727066] uhci_hcd 0000:00:01.2: using default PCI settings
[ 9581.727107] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[ 9581.727108] piix4_smbus 0000:00:01.3: using default PCI settings
[ 9581.727144] pci 0000:00:02.0: no hotplug settings from platform
[ 9581.727146] pci 0000:00:02.0: using default PCI settings
[ 9581.733027] e1000 0000:00:03.0: no hotplug settings from platform
[ 9581.733039] e1000 0000:00:03.0: using default PCI settings
[ 9581.733089] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[ 9581.733090] sym53c8xx 0000:00:04.0: using default PCI settings
[ 9581.733139] pci 0000:00:05.0: no hotplug settings from platform
[ 9581.733140] pci 0000:00:05.0: using default PCI settings
[ 9581.744510] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[ 9581.744610] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[ 9581.744672] virtio-pci 0000:00:05.0: setting latency timer to 64
[ 9581.745023] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[ 9581.745046] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[ 9581.746525]  vdb: unknown partition table
[ 9680.150742] udev: starting version 151
[ 9684.602426] virtio-pci 0000:00:05.0: PCI INT A disabled
[ 9726.139885] udev: starting version 151
[ 9733.445525] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[ 9733.445561] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[ 9733.446006] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[ 9733.446027] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[ 9733.446031] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[ 9733.446049] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[ 9733.446055] pci 0000:00:00.0: no hotplug settings from platform
[ 9733.446057] pci 0000:00:00.0: using default PCI settings
[ 9733.446094] pci 0000:00:01.0: no hotplug settings from platform
[ 9733.446095] pci 0000:00:01.0: using default PCI settings
[ 9733.446135] ata_piix 0000:00:01.1: no hotplug settings from platform
[ 9733.446136] ata_piix 0000:00:01.1: using default PCI settings
[ 9733.446175] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[ 9733.446177] uhci_hcd 0000:00:01.2: using default PCI settings
[ 9733.446216] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[ 9733.446218] piix4_smbus 0000:00:01.3: using default PCI settings
[ 9733.446254] pci 0000:00:02.0: no hotplug settings from platform
[ 9733.446255] pci 0000:00:02.0: using default PCI settings
[ 9733.451641] e1000 0000:00:03.0: no hotplug settings from platform
[ 9733.451652] e1000 0000:00:03.0: using default PCI settings
[ 9733.451706] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[ 9733.451708] sym53c8xx 0000:00:04.0: using default PCI settings
[ 9733.451758] pci 0000:00:05.0: no hotplug settings from platform
[ 9733.451759] pci 0000:00:05.0: using default PCI settings
[ 9733.461479] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[ 9733.461566] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[ 9733.461629] virtio-pci 0000:00:05.0: setting latency timer to 64
[ 9733.461981] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[ 9733.462000] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[ 9733.463320]  vdc: unknown partition table
[ 9748.183240] udev: starting version 151
[ 9753.527608] virtio-pci 0000:00:05.0: PCI INT A disabled
[11627.294443] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[11627.294479] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[11627.294954] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[11627.294975] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[11627.294979] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[11627.294998] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[11627.295004] pci 0000:00:00.0: no hotplug settings from platform
[11627.295006] pci 0000:00:00.0: using default PCI settings
[11627.295042] pci 0000:00:01.0: no hotplug settings from platform
[11627.295044] pci 0000:00:01.0: using default PCI settings
[11627.295083] ata_piix 0000:00:01.1: no hotplug settings from platform
[11627.295085] ata_piix 0000:00:01.1: using default PCI settings
[11627.295125] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[11627.295126] uhci_hcd 0000:00:01.2: using default PCI settings
[11627.295166] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[11627.295168] piix4_smbus 0000:00:01.3: using default PCI settings
[11627.295203] pci 0000:00:02.0: no hotplug settings from platform
[11627.295205] pci 0000:00:02.0: using default PCI settings
[11627.301020] e1000 0000:00:03.0: no hotplug settings from platform
[11627.301032] e1000 0000:00:03.0: using default PCI settings
[11627.301081] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[11627.301083] sym53c8xx 0000:00:04.0: using default PCI settings
[11627.301132] pci 0000:00:05.0: no hotplug settings from platform
[11627.301133] pci 0000:00:05.0: using default PCI settings
[11627.303965] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[11627.304047] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[11627.304116] virtio-pci 0000:00:05.0: setting latency timer to 64
[11627.304520] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[11627.304543] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[11627.305327]  vdd: unknown partition table
[11638.115852] udev: starting version 151
[11643.873641] virtio-pci 0000:00:05.0: PCI INT A disabled
[11650.826258] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[11650.826294] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[11650.826758] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[11650.826779] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[11650.826783] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[11650.826801] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[11650.826807] pci 0000:00:00.0: no hotplug settings from platform
[11650.826809] pci 0000:00:00.0: using default PCI settings
[11650.826845] pci 0000:00:01.0: no hotplug settings from platform
[11650.826847] pci 0000:00:01.0: using default PCI settings
[11650.826886] ata_piix 0000:00:01.1: no hotplug settings from platform
[11650.826888] ata_piix 0000:00:01.1: using default PCI settings
[11650.826927] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[11650.826929] uhci_hcd 0000:00:01.2: using default PCI settings
[11650.826968] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[11650.826970] piix4_smbus 0000:00:01.3: using default PCI settings
[11650.827005] pci 0000:00:02.0: no hotplug settings from platform
[11650.827007] pci 0000:00:02.0: using default PCI settings
[11650.829554] e1000 0000:00:03.0: no hotplug settings from platform
[11650.829568] e1000 0000:00:03.0: using default PCI settings
[11650.829617] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[11650.829618] sym53c8xx 0000:00:04.0: using default PCI settings
[11650.829666] pci 0000:00:05.0: no hotplug settings from platform
[11650.829667] pci 0000:00:05.0: using default PCI settings
[11650.838187] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[11650.838270] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[11650.838345] virtio-pci 0000:00:05.0: setting latency timer to 64
[11650.838710] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[11650.838732] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[11650.839386]  vde: unknown partition table
[11794.411038] virtio-pci 0000:00:05.0: PCI INT A disabled
[11806.934316] udev: starting version 151
[11814.448291] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[11814.448327] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[11814.448773] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[11814.448794] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[11814.448798] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[11814.448816] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[11814.448822] pci 0000:00:00.0: no hotplug settings from platform
[11814.448824] pci 0000:00:00.0: using default PCI settings
[11814.448860] pci 0000:00:01.0: no hotplug settings from platform
[11814.448862] pci 0000:00:01.0: using default PCI settings
[11814.448901] ata_piix 0000:00:01.1: no hotplug settings from platform
[11814.448903] ata_piix 0000:00:01.1: using default PCI settings
[11814.448942] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[11814.448944] uhci_hcd 0000:00:01.2: using default PCI settings
[11814.448984] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[11814.448985] piix4_smbus 0000:00:01.3: using default PCI settings
[11814.449020] pci 0000:00:02.0: no hotplug settings from platform
[11814.449022] pci 0000:00:02.0: using default PCI settings
[11814.452176] e1000 0000:00:03.0: no hotplug settings from platform
[11814.452188] e1000 0000:00:03.0: using default PCI settings
[11814.452236] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[11814.452238] sym53c8xx 0000:00:04.0: using default PCI settings
[11814.452286] pci 0000:00:05.0: no hotplug settings from platform
[11814.452288] pci 0000:00:05.0: using default PCI settings
[11814.458814] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[11814.458898] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[11814.458966] virtio-pci 0000:00:05.0: setting latency timer to 64
[11814.459346] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[11814.459368] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[11814.460243]  vdf: unknown partition table
[12055.976325] udev: starting version 151
[12059.263049] virtio-pci 0000:00:05.0: PCI INT A disabled
[12065.109021] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[12065.109057] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[12065.109499] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[12065.109520] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[12065.109524] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[12065.109542] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[12065.109548] pci 0000:00:00.0: no hotplug settings from platform
[12065.109550] pci 0000:00:00.0: using default PCI settings
[12065.109586] pci 0000:00:01.0: no hotplug settings from platform
[12065.109588] pci 0000:00:01.0: using default PCI settings
[12065.109627] ata_piix 0000:00:01.1: no hotplug settings from platform
[12065.109628] ata_piix 0000:00:01.1: using default PCI settings
[12065.109668] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[12065.109670] uhci_hcd 0000:00:01.2: using default PCI settings
[12065.109709] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[12065.109711] piix4_smbus 0000:00:01.3: using default PCI settings
[12065.109746] pci 0000:00:02.0: no hotplug settings from platform
[12065.109747] pci 0000:00:02.0: using default PCI settings
[12065.115277] e1000 0000:00:03.0: no hotplug settings from platform
[12065.115289] e1000 0000:00:03.0: using default PCI settings
[12065.115377] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[12065.115379] sym53c8xx 0000:00:04.0: using default PCI settings
[12065.115428] pci 0000:00:05.0: no hotplug settings from platform
[12065.115429] pci 0000:00:05.0: using default PCI settings
[12065.125979] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[12065.126054] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[12065.126117] virtio-pci 0000:00:05.0: setting latency timer to 64
[12065.126496] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[12065.126519] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[12065.127175]  vdg: unknown partition table
[12429.168902] udev: starting version 151
[12434.807973] virtio-pci 0000:00:05.0: PCI INT A disabled
[12446.608886] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[12446.608922] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[12446.609377] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[12446.609398] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[12446.609402] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[12446.609421] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[12446.609426] pci 0000:00:00.0: no hotplug settings from platform
[12446.609428] pci 0000:00:00.0: using default PCI settings
[12446.609465] pci 0000:00:01.0: no hotplug settings from platform
[12446.609467] pci 0000:00:01.0: using default PCI settings
[12446.609506] ata_piix 0000:00:01.1: no hotplug settings from platform
[12446.609508] ata_piix 0000:00:01.1: using default PCI settings
[12446.609547] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[12446.609549] uhci_hcd 0000:00:01.2: using default PCI settings
[12446.609588] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[12446.609590] piix4_smbus 0000:00:01.3: using default PCI settings
[12446.609625] pci 0000:00:02.0: no hotplug settings from platform
[12446.609627] pci 0000:00:02.0: using default PCI settings
[12446.615448] e1000 0000:00:03.0: no hotplug settings from platform
[12446.615460] e1000 0000:00:03.0: using default PCI settings
[12446.615510] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[12446.615511] sym53c8xx 0000:00:04.0: using default PCI settings
[12446.615560] pci 0000:00:05.0: no hotplug settings from platform
[12446.615561] pci 0000:00:05.0: using default PCI settings
[12446.641220] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[12446.641296] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[12446.641365] virtio-pci 0000:00:05.0: setting latency timer to 64
[12446.641730] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[12446.641753] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[12446.642452]  vdh: unknown partition table
[12891.349611] virtio-pci 0000:00:05.0: PCI INT A disabled
[12900.634645] udev: starting version 151
[12904.496174] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[12904.496211] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[12904.496640] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[12904.496661] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[12904.496665] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[12904.496684] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[12904.496690] pci 0000:00:00.0: no hotplug settings from platform
[12904.496692] pci 0000:00:00.0: using default PCI settings
[12904.496728] pci 0000:00:01.0: no hotplug settings from platform
[12904.496729] pci 0000:00:01.0: using default PCI settings
[12904.496765] ata_piix 0000:00:01.1: no hotplug settings from platform
[12904.496767] ata_piix 0000:00:01.1: using default PCI settings
[12904.496803] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[12904.496804] uhci_hcd 0000:00:01.2: using default PCI settings
[12904.496856] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[12904.496858] piix4_smbus 0000:00:01.3: using default PCI settings
[12904.496893] pci 0000:00:02.0: no hotplug settings from platform
[12904.496895] pci 0000:00:02.0: using default PCI settings
[12904.502650] e1000 0000:00:03.0: no hotplug settings from platform
[12904.502662] e1000 0000:00:03.0: using default PCI settings
[12904.502711] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[12904.502712] sym53c8xx 0000:00:04.0: using default PCI settings
[12904.502761] pci 0000:00:05.0: no hotplug settings from platform
[12904.502762] pci 0000:00:05.0: using default PCI settings
[12904.513300] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[12904.513375] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[12904.513435] virtio-pci 0000:00:05.0: setting latency timer to 64
[12904.513781] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[12904.513805] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[12904.514467]  vdi: unknown partition table
[12927.953506] udev: starting version 151
[12930.132625] virtio-pci 0000:00:05.0: PCI INT A disabled
[13244.191446] udev: starting version 151
[13253.207321] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[13253.207357] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[13253.207785] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[13253.207807] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[13253.207811] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[13253.207829] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[13253.207835] pci 0000:00:00.0: no hotplug settings from platform
[13253.207837] pci 0000:00:00.0: using default PCI settings
[13253.207874] pci 0000:00:01.0: no hotplug settings from platform
[13253.207876] pci 0000:00:01.0: using default PCI settings
[13253.207912] ata_piix 0000:00:01.1: no hotplug settings from platform
[13253.207914] ata_piix 0000:00:01.1: using default PCI settings
[13253.207950] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[13253.207952] uhci_hcd 0000:00:01.2: using default PCI settings
[13253.207988] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[13253.207990] piix4_smbus 0000:00:01.3: using default PCI settings
[13253.208026] pci 0000:00:02.0: no hotplug settings from platform
[13253.208028] pci 0000:00:02.0: using default PCI settings
[13253.212261] e1000 0000:00:03.0: no hotplug settings from platform
[13253.212273] e1000 0000:00:03.0: using default PCI settings
[13253.212322] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[13253.212323] sym53c8xx 0000:00:04.0: using default PCI settings
[13253.212372] pci 0000:00:05.0: no hotplug settings from platform
[13253.212374] pci 0000:00:05.0: using default PCI settings
[13253.223381] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[13253.223456] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[13253.223520] virtio-pci 0000:00:05.0: setting latency timer to 64
[13253.223868] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[13253.223891] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[13253.224584]  vdj: unknown partition table
[13432.314335] udev: starting version 151
[13912.352361] udev: starting version 151
[13915.776784] virtio-pci 0000:00:05.0: PCI INT A disabled
[13933.682096] udev: starting version 151
[13937.266614] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[13937.266649] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[13937.267085] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[13937.267107] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[13937.267111] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[13937.267129] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[13937.267153] pci 0000:00:00.0: no hotplug settings from platform
[13937.267155] pci 0000:00:00.0: using default PCI settings
[13937.267192] pci 0000:00:01.0: no hotplug settings from platform
[13937.267193] pci 0000:00:01.0: using default PCI settings
[13937.267229] ata_piix 0000:00:01.1: no hotplug settings from platform
[13937.267230] ata_piix 0000:00:01.1: using default PCI settings
[13937.267266] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[13937.267268] uhci_hcd 0000:00:01.2: using default PCI settings
[13937.267304] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[13937.267305] piix4_smbus 0000:00:01.3: using default PCI settings
[13937.267341] pci 0000:00:02.0: no hotplug settings from platform
[13937.267342] pci 0000:00:02.0: using default PCI settings
[13937.270797] e1000 0000:00:03.0: no hotplug settings from platform
[13937.270809] e1000 0000:00:03.0: using default PCI settings
[13937.270857] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[13937.270859] sym53c8xx 0000:00:04.0: using default PCI settings
[13937.270907] pci 0000:00:05.0: no hotplug settings from platform
[13937.270908] pci 0000:00:05.0: using default PCI settings
[13937.277179] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[13937.277263] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[13937.277331] virtio-pci 0000:00:05.0: setting latency timer to 64
[13937.277771] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[13937.277794] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[13937.278513]  vdk: unknown partition table
[14027.691587] udev: starting version 151
[14031.944004] udev: starting version 151
[14034.989834] virtio-pci 0000:00:05.0: PCI INT A disabled
[14044.761234] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[14044.761270] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[14044.761701] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[14044.761722] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[14044.761726] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[14044.761745] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[14044.761751] pci 0000:00:00.0: no hotplug settings from platform
[14044.761753] pci 0000:00:00.0: using default PCI settings
[14044.761790] pci 0000:00:01.0: no hotplug settings from platform
[14044.761791] pci 0000:00:01.0: using default PCI settings
[14044.761827] ata_piix 0000:00:01.1: no hotplug settings from platform
[14044.761829] ata_piix 0000:00:01.1: using default PCI settings
[14044.761872] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[14044.761873] uhci_hcd 0000:00:01.2: using default PCI settings
[14044.761909] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[14044.761910] piix4_smbus 0000:00:01.3: using default PCI settings
[14044.761946] pci 0000:00:02.0: no hotplug settings from platform
[14044.761947] pci 0000:00:02.0: using default PCI settings
[14044.765317] e1000 0000:00:03.0: no hotplug settings from platform
[14044.765332] e1000 0000:00:03.0: using default PCI settings
[14044.765380] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[14044.765382] sym53c8xx 0000:00:04.0: using default PCI settings
[14044.765431] pci 0000:00:05.0: no hotplug settings from platform
[14044.765432] pci 0000:00:05.0: using default PCI settings
[14044.775453] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[14044.775532] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[14044.775597] virtio-pci 0000:00:05.0: setting latency timer to 64
[14044.775961] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[14044.775983] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[14044.776664]  vdl: unknown partition table
[15593.985317] udev: starting version 151
[15597.468461] virtio-pci 0000:00:05.0: PCI INT A disabled
[15599.849658] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[15599.849694] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[15599.850154] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[15599.850175] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[15599.850179] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[15599.850198] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[15599.850203] pci 0000:00:00.0: no hotplug settings from platform
[15599.850205] pci 0000:00:00.0: using default PCI settings
[15599.850242] pci 0000:00:01.0: no hotplug settings from platform
[15599.850243] pci 0000:00:01.0: using default PCI settings
[15599.850279] ata_piix 0000:00:01.1: no hotplug settings from platform
[15599.850281] ata_piix 0000:00:01.1: using default PCI settings
[15599.850317] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[15599.850318] uhci_hcd 0000:00:01.2: using default PCI settings
[15599.850354] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[15599.850356] piix4_smbus 0000:00:01.3: using default PCI settings
[15599.850391] pci 0000:00:02.0: no hotplug settings from platform
[15599.850392] pci 0000:00:02.0: using default PCI settings
[15599.856107] e1000 0000:00:03.0: no hotplug settings from platform
[15599.856120] e1000 0000:00:03.0: using default PCI settings
[15599.856169] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[15599.856170] sym53c8xx 0000:00:04.0: using default PCI settings
[15599.856221] pci 0000:00:05.0: no hotplug settings from platform
[15599.856222] pci 0000:00:05.0: using default PCI settings
[15599.868451] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[15599.868527] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[15599.868590] virtio-pci 0000:00:05.0: setting latency timer to 64
[15599.868936] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[15599.868959] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[15599.869631]  vdm: unknown partition table
[15803.503188] udev: starting version 151
[15808.234333] virtio-pci 0000:00:05.0: PCI INT A disabled
[15819.507103] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[15819.507139] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[15819.507569] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[15819.507590] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[15819.507593] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[15819.507612] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[15819.507618] pci 0000:00:00.0: no hotplug settings from platform
[15819.507620] pci 0000:00:00.0: using default PCI settings
[15819.507656] pci 0000:00:01.0: no hotplug settings from platform
[15819.507658] pci 0000:00:01.0: using default PCI settings
[15819.507694] ata_piix 0000:00:01.1: no hotplug settings from platform
[15819.507695] ata_piix 0000:00:01.1: using default PCI settings
[15819.507731] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[15819.507732] uhci_hcd 0000:00:01.2: using default PCI settings
[15819.507768] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[15819.507770] piix4_smbus 0000:00:01.3: using default PCI settings
[15819.507805] pci 0000:00:02.0: no hotplug settings from platform
[15819.507807] pci 0000:00:02.0: using default PCI settings
[15819.512768] e1000 0000:00:03.0: no hotplug settings from platform
[15819.512780] e1000 0000:00:03.0: using default PCI settings
[15819.512830] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[15819.512831] sym53c8xx 0000:00:04.0: using default PCI settings
[15819.512893] pci 0000:00:05.0: no hotplug settings from platform
[15819.512894] pci 0000:00:05.0: using default PCI settings
[15819.523140] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[15819.523213] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[15819.523275] virtio-pci 0000:00:05.0: setting latency timer to 64
[15819.523619] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[15819.523641] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[15819.524333]  vdn: unknown partition table
[15896.005417] virtio-pci 0000:00:05.0: PCI INT A disabled
[15900.935983] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[15900.936019] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[15900.936459] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[15900.936480] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[15900.936484] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[15900.936509] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[15900.936515] pci 0000:00:00.0: no hotplug settings from platform
[15900.936516] pci 0000:00:00.0: using default PCI settings
[15900.936553] pci 0000:00:01.0: no hotplug settings from platform
[15900.936554] pci 0000:00:01.0: using default PCI settings
[15900.936590] ata_piix 0000:00:01.1: no hotplug settings from platform
[15900.936592] ata_piix 0000:00:01.1: using default PCI settings
[15900.936628] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[15900.936629] uhci_hcd 0000:00:01.2: using default PCI settings
[15900.936665] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[15900.936667] piix4_smbus 0000:00:01.3: using default PCI settings
[15900.936702] pci 0000:00:02.0: no hotplug settings from platform
[15900.936703] pci 0000:00:02.0: using default PCI settings
[15900.939705] e1000 0000:00:03.0: no hotplug settings from platform
[15900.939720] e1000 0000:00:03.0: using default PCI settings
[15900.939768] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[15900.939770] sym53c8xx 0000:00:04.0: using default PCI settings
[15900.939818] pci 0000:00:05.0: no hotplug settings from platform
[15900.939820] pci 0000:00:05.0: using default PCI settings
[15900.943343] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[15900.943422] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[15900.943497] virtio-pci 0000:00:05.0: setting latency timer to 64
[15900.943913] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[15900.943936] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[15900.944779]  vdo: unknown partition table
[15912.103943] virtio-pci 0000:00:05.0: PCI INT A disabled
[15929.424872] udev: starting version 151
[15933.480633] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[15933.480668] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[15933.481115] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[15933.481136] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[15933.481140] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[15933.481159] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[15933.481165] pci 0000:00:00.0: no hotplug settings from platform
[15933.481167] pci 0000:00:00.0: using default PCI settings
[15933.481204] pci 0000:00:01.0: no hotplug settings from platform
[15933.481206] pci 0000:00:01.0: using default PCI settings
[15933.481246] ata_piix 0000:00:01.1: no hotplug settings from platform
[15933.481247] ata_piix 0000:00:01.1: using default PCI settings
[15933.481287] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[15933.481288] uhci_hcd 0000:00:01.2: using default PCI settings
[15933.481329] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[15933.481330] piix4_smbus 0000:00:01.3: using default PCI settings
[15933.481367] pci 0000:00:02.0: no hotplug settings from platform
[15933.481368] pci 0000:00:02.0: using default PCI settings
[15933.484046] e1000 0000:00:03.0: no hotplug settings from platform
[15933.484062] e1000 0000:00:03.0: using default PCI settings
[15933.484111] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[15933.484113] sym53c8xx 0000:00:04.0: using default PCI settings
[15933.484162] pci 0000:00:05.0: no hotplug settings from platform
[15933.484164] pci 0000:00:05.0: using default PCI settings
[15933.484944] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[15933.485009] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[15933.485077] virtio-pci 0000:00:05.0: setting latency timer to 64
[15933.485653] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[15933.485676] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[15933.486612]  vdp: unknown partition table
[15988.284888] virtio-pci 0000:00:05.0: PCI INT A disabled
[15991.494723] udev: starting version 151
[15994.863954] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[15994.863990] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[15994.864421] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[15994.864443] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[15994.864447] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[15994.864465] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[15994.864471] pci 0000:00:00.0: no hotplug settings from platform
[15994.864473] pci 0000:00:00.0: using default PCI settings
[15994.864510] pci 0000:00:01.0: no hotplug settings from platform
[15994.864512] pci 0000:00:01.0: using default PCI settings
[15994.864548] ata_piix 0000:00:01.1: no hotplug settings from platform
[15994.864549] ata_piix 0000:00:01.1: using default PCI settings
[15994.864586] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[15994.864587] uhci_hcd 0000:00:01.2: using default PCI settings
[15994.864623] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[15994.864625] piix4_smbus 0000:00:01.3: using default PCI settings
[15994.864661] pci 0000:00:02.0: no hotplug settings from platform
[15994.864663] pci 0000:00:02.0: using default PCI settings
[15994.867904] e1000 0000:00:03.0: no hotplug settings from platform
[15994.867919] e1000 0000:00:03.0: using default PCI settings
[15994.867967] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[15994.867969] sym53c8xx 0000:00:04.0: using default PCI settings
[15994.868017] pci 0000:00:05.0: no hotplug settings from platform
[15994.868018] pci 0000:00:05.0: using default PCI settings
[15994.868834] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[15994.868900] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[15994.868969] virtio-pci 0000:00:05.0: setting latency timer to 64
[15994.869396] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[15994.869418] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[15994.870458]  vdq: unknown partition table
[16045.829325] udev: starting version 151
[16048.893616] virtio-pci 0000:00:05.0: PCI INT A disabled
[16062.284019] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[16062.284055] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[16062.284499] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[16062.284519] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[16062.284523] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[16062.284542] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[16062.284548] pci 0000:00:00.0: no hotplug settings from platform
[16062.284550] pci 0000:00:00.0: using default PCI settings
[16062.284586] pci 0000:00:01.0: no hotplug settings from platform
[16062.284588] pci 0000:00:01.0: using default PCI settings
[16062.284627] ata_piix 0000:00:01.1: no hotplug settings from platform
[16062.284629] ata_piix 0000:00:01.1: using default PCI settings
[16062.284684] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[16062.284686] uhci_hcd 0000:00:01.2: using default PCI settings
[16062.284725] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[16062.284727] piix4_smbus 0000:00:01.3: using default PCI settings
[16062.284762] pci 0000:00:02.0: no hotplug settings from platform
[16062.284764] pci 0000:00:02.0: using default PCI settings
[16062.287545] e1000 0000:00:03.0: no hotplug settings from platform
[16062.287559] e1000 0000:00:03.0: using default PCI settings
[16062.287608] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[16062.287609] sym53c8xx 0000:00:04.0: using default PCI settings
[16062.287657] pci 0000:00:05.0: no hotplug settings from platform
[16062.287659] pci 0000:00:05.0: using default PCI settings
[16062.295920] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[16062.295996] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[16062.296066] virtio-pci 0000:00:05.0: setting latency timer to 64
[16062.296436] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[16062.296458] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[16062.297181]  vdr: unknown partition table
[16121.922070] udev: starting version 151
[16126.620759] virtio-pci 0000:00:05.0: PCI INT A disabled
[16134.429178] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[16134.429214] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[16134.429643] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[16134.429665] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[16134.429669] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[16134.429688] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[16134.429693] pci 0000:00:00.0: no hotplug settings from platform
[16134.429695] pci 0000:00:00.0: using default PCI settings
[16134.429732] pci 0000:00:01.0: no hotplug settings from platform
[16134.429733] pci 0000:00:01.0: using default PCI settings
[16134.429770] ata_piix 0000:00:01.1: no hotplug settings from platform
[16134.429771] ata_piix 0000:00:01.1: using default PCI settings
[16134.429807] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[16134.429809] uhci_hcd 0000:00:01.2: using default PCI settings
[16134.429844] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[16134.429846] piix4_smbus 0000:00:01.3: using default PCI settings
[16134.429881] pci 0000:00:02.0: no hotplug settings from platform
[16134.429883] pci 0000:00:02.0: using default PCI settings
[16134.433593] e1000 0000:00:03.0: no hotplug settings from platform
[16134.433605] e1000 0000:00:03.0: using default PCI settings
[16134.433654] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[16134.433655] sym53c8xx 0000:00:04.0: using default PCI settings
[16134.433710] pci 0000:00:05.0: no hotplug settings from platform
[16134.433712] pci 0000:00:05.0: using default PCI settings
[16134.443684] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[16134.443757] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[16134.443820] virtio-pci 0000:00:05.0: setting latency timer to 64
[16134.444165] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[16134.444187] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[16134.444841]  vds: unknown partition table
[16707.247098] udev: starting version 151
[16711.018135] virtio-pci 0000:00:05.0: PCI INT A disabled
[16750.468660] udev: starting version 151
[16854.436608] udev: starting version 151
[16858.565320] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[16858.565356] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[16858.565793] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[16858.565814] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[16858.565834] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[16858.565853] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[16858.565860] pci 0000:00:00.0: no hotplug settings from platform
[16858.565861] pci 0000:00:00.0: using default PCI settings
[16858.565899] pci 0000:00:01.0: no hotplug settings from platform
[16858.565900] pci 0000:00:01.0: using default PCI settings
[16858.565936] ata_piix 0000:00:01.1: no hotplug settings from platform
[16858.565938] ata_piix 0000:00:01.1: using default PCI settings
[16858.565975] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[16858.565976] uhci_hcd 0000:00:01.2: using default PCI settings
[16858.566012] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[16858.566014] piix4_smbus 0000:00:01.3: using default PCI settings
[16858.566051] pci 0000:00:02.0: no hotplug settings from platform
[16858.566052] pci 0000:00:02.0: using default PCI settings
[16858.572505] e1000 0000:00:03.0: no hotplug settings from platform
[16858.572516] e1000 0000:00:03.0: using default PCI settings
[16858.572565] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[16858.572567] sym53c8xx 0000:00:04.0: using default PCI settings
[16858.572616] pci 0000:00:05.0: no hotplug settings from platform
[16858.572617] pci 0000:00:05.0: using default PCI settings
[16858.590590] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[16858.590796] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[16858.590860] virtio-pci 0000:00:05.0: setting latency timer to 64
[16858.591212] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[16858.591234] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[16858.591940]  vdt: unknown partition table
[17024.013074] udev: starting version 151
[17035.517702] virtio-pci 0000:00:05.0: PCI INT A disabled
[17051.433569] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[17051.433604] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[17051.434035] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[17051.434056] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[17051.434059] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[17051.434078] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[17051.434084] pci 0000:00:00.0: no hotplug settings from platform
[17051.434086] pci 0000:00:00.0: using default PCI settings
[17051.434122] pci 0000:00:01.0: no hotplug settings from platform
[17051.434124] pci 0000:00:01.0: using default PCI settings
[17051.434160] ata_piix 0000:00:01.1: no hotplug settings from platform
[17051.434161] ata_piix 0000:00:01.1: using default PCI settings
[17051.434197] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[17051.434199] uhci_hcd 0000:00:01.2: using default PCI settings
[17051.434234] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[17051.434236] piix4_smbus 0000:00:01.3: using default PCI settings
[17051.434271] pci 0000:00:02.0: no hotplug settings from platform
[17051.434273] pci 0000:00:02.0: using default PCI settings
[17051.438094] e1000 0000:00:03.0: no hotplug settings from platform
[17051.438109] e1000 0000:00:03.0: using default PCI settings
[17051.438158] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[17051.438159] sym53c8xx 0000:00:04.0: using default PCI settings
[17051.438209] pci 0000:00:05.0: no hotplug settings from platform
[17051.438211] pci 0000:00:05.0: using default PCI settings
[17051.447288] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[17051.447370] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[17051.447435] virtio-pci 0000:00:05.0: setting latency timer to 64
[17051.447798] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[17051.447817] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[17051.448538]  vdu: unknown partition table
[17271.623381] udev: starting version 151
[17455.109841] udev: starting version 151
[17460.004888] virtio-pci 0000:00:05.0: PCI INT A disabled
[17472.277885] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[17472.277922] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[17472.278354] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[17472.278375] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[17472.278379] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[17472.278398] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[17472.278403] pci 0000:00:00.0: no hotplug settings from platform
[17472.278405] pci 0000:00:00.0: using default PCI settings
[17472.278442] pci 0000:00:01.0: no hotplug settings from platform
[17472.278443] pci 0000:00:01.0: using default PCI settings
[17472.278479] ata_piix 0000:00:01.1: no hotplug settings from platform
[17472.278481] ata_piix 0000:00:01.1: using default PCI settings
[17472.278517] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[17472.278518] uhci_hcd 0000:00:01.2: using default PCI settings
[17472.278554] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[17472.278556] piix4_smbus 0000:00:01.3: using default PCI settings
[17472.278591] pci 0000:00:02.0: no hotplug settings from platform
[17472.278592] pci 0000:00:02.0: using default PCI settings
[17472.288560] e1000 0000:00:03.0: no hotplug settings from platform
[17472.288572] e1000 0000:00:03.0: using default PCI settings
[17472.288622] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[17472.288624] sym53c8xx 0000:00:04.0: using default PCI settings
[17472.288673] pci 0000:00:05.0: no hotplug settings from platform
[17472.288675] pci 0000:00:05.0: using default PCI settings
[17472.295581] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[17472.295657] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[17472.295726] virtio-pci 0000:00:05.0: setting latency timer to 64
[17472.296841] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[17472.296860] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[17472.297503]  vdv: unknown partition table
[17657.303108] udev: starting version 151
[17662.050817] virtio-pci 0000:00:05.0: PCI INT A disabled
[17682.050218] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[17682.050254] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[17682.050682] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[17682.050703] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[17682.050707] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[17682.050726] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[17682.050731] pci 0000:00:00.0: no hotplug settings from platform
[17682.050733] pci 0000:00:00.0: using default PCI settings
[17682.050770] pci 0000:00:01.0: no hotplug settings from platform
[17682.050771] pci 0000:00:01.0: using default PCI settings
[17682.050807] ata_piix 0000:00:01.1: no hotplug settings from platform
[17682.050808] ata_piix 0000:00:01.1: using default PCI settings
[17682.050845] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[17682.050846] uhci_hcd 0000:00:01.2: using default PCI settings
[17682.050882] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[17682.050883] piix4_smbus 0000:00:01.3: using default PCI settings
[17682.050919] pci 0000:00:02.0: no hotplug settings from platform
[17682.050920] pci 0000:00:02.0: using default PCI settings
[17682.054689] e1000 0000:00:03.0: no hotplug settings from platform
[17682.054703] e1000 0000:00:03.0: using default PCI settings
[17682.054752] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[17682.054754] sym53c8xx 0000:00:04.0: using default PCI settings
[17682.054824] pci 0000:00:05.0: no hotplug settings from platform
[17682.054826] pci 0000:00:05.0: using default PCI settings
[17682.064859] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[17682.064935] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[17682.064998] virtio-pci 0000:00:05.0: setting latency timer to 64
[17682.065345] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[17682.065368] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[17682.066028]  vdw: unknown partition table
[17705.429111] udev: starting version 151
[17711.651147] virtio-pci 0000:00:05.0: PCI INT A disabled
[17735.274509] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[17735.274545] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[17735.274977] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[17735.274998] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[17735.275002] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[17735.275021] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[17735.275027] pci 0000:00:00.0: no hotplug settings from platform
[17735.275029] pci 0000:00:00.0: using default PCI settings
[17735.275065] pci 0000:00:01.0: no hotplug settings from platform
[17735.275067] pci 0000:00:01.0: using default PCI settings
[17735.275103] ata_piix 0000:00:01.1: no hotplug settings from platform
[17735.275104] ata_piix 0000:00:01.1: using default PCI settings
[17735.275140] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[17735.275142] uhci_hcd 0000:00:01.2: using default PCI settings
[17735.275177] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[17735.275179] piix4_smbus 0000:00:01.3: using default PCI settings
[17735.275214] pci 0000:00:02.0: no hotplug settings from platform
[17735.275216] pci 0000:00:02.0: using default PCI settings
[17735.279299] e1000 0000:00:03.0: no hotplug settings from platform
[17735.279314] e1000 0000:00:03.0: using default PCI settings
[17735.279363] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[17735.279365] sym53c8xx 0000:00:04.0: using default PCI settings
[17735.279415] pci 0000:00:05.0: no hotplug settings from platform
[17735.279417] pci 0000:00:05.0: using default PCI settings
[17735.288838] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[17735.288917] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[17735.288978] virtio-pci 0000:00:05.0: setting latency timer to 64
[17735.289335] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[17735.289357] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[17735.290102]  vdx: unknown partition table
[17853.916880] udev: starting version 151
[17858.022929] virtio-pci 0000:00:05.0: PCI INT A disabled
[17861.114090] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[17861.114126] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[17861.114558] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[17861.114579] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[17861.114583] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[17861.114602] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[17861.114608] pci 0000:00:00.0: no hotplug settings from platform
[17861.114610] pci 0000:00:00.0: using default PCI settings
[17861.114646] pci 0000:00:01.0: no hotplug settings from platform
[17861.114648] pci 0000:00:01.0: using default PCI settings
[17861.114683] ata_piix 0000:00:01.1: no hotplug settings from platform
[17861.114685] ata_piix 0000:00:01.1: using default PCI settings
[17861.114721] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[17861.114723] uhci_hcd 0000:00:01.2: using default PCI settings
[17861.114758] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[17861.114760] piix4_smbus 0000:00:01.3: using default PCI settings
[17861.114812] pci 0000:00:02.0: no hotplug settings from platform
[17861.114813] pci 0000:00:02.0: using default PCI settings
[17861.118487] e1000 0000:00:03.0: no hotplug settings from platform
[17861.118501] e1000 0000:00:03.0: using default PCI settings
[17861.118549] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[17861.118551] sym53c8xx 0000:00:04.0: using default PCI settings
[17861.118599] pci 0000:00:05.0: no hotplug settings from platform
[17861.118600] pci 0000:00:05.0: using default PCI settings
[17861.128019] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[17861.128101] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[17861.128165] virtio-pci 0000:00:05.0: setting latency timer to 64
[17861.128529] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[17861.128552] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[17861.129201]  vdy: unknown partition table
[18040.224755] udev: starting version 151
[18052.681645] virtio-pci 0000:00:05.0: PCI INT A disabled
[18065.829326] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[18065.829362] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[18065.829792] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[18065.829813] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[18065.829817] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[18065.829836] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[18065.829842] pci 0000:00:00.0: no hotplug settings from platform
[18065.829844] pci 0000:00:00.0: using default PCI settings
[18065.829880] pci 0000:00:01.0: no hotplug settings from platform
[18065.829881] pci 0000:00:01.0: using default PCI settings
[18065.829918] ata_piix 0000:00:01.1: no hotplug settings from platform
[18065.829919] ata_piix 0000:00:01.1: using default PCI settings
[18065.829955] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[18065.829956] uhci_hcd 0000:00:01.2: using default PCI settings
[18065.829992] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[18065.829994] piix4_smbus 0000:00:01.3: using default PCI settings
[18065.830059] pci 0000:00:02.0: no hotplug settings from platform
[18065.830060] pci 0000:00:02.0: using default PCI settings
[18065.836698] e1000 0000:00:03.0: no hotplug settings from platform
[18065.836710] e1000 0000:00:03.0: using default PCI settings
[18065.836760] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[18065.836761] sym53c8xx 0000:00:04.0: using default PCI settings
[18065.836811] pci 0000:00:05.0: no hotplug settings from platform
[18065.836812] pci 0000:00:05.0: using default PCI settings
[18065.849239] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[18065.849316] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[18065.849380] virtio-pci 0000:00:05.0: setting latency timer to 64
[18065.849726] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[18065.849745] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[18065.850485]  vdz: unknown partition table
[18117.633300] virtio-pci 0000:00:05.0: PCI INT A disabled
[18137.301825] udev: starting version 151
[18144.746530] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[18144.746566] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[18144.747012] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[18144.747033] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[18144.747037] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[18144.747056] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[18144.747061] pci 0000:00:00.0: no hotplug settings from platform
[18144.747063] pci 0000:00:00.0: using default PCI settings
[18144.747100] pci 0000:00:01.0: no hotplug settings from platform
[18144.747117] pci 0000:00:01.0: using default PCI settings
[18144.747156] ata_piix 0000:00:01.1: no hotplug settings from platform
[18144.747158] ata_piix 0000:00:01.1: using default PCI settings
[18144.747197] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[18144.747199] uhci_hcd 0000:00:01.2: using default PCI settings
[18144.747238] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[18144.747240] piix4_smbus 0000:00:01.3: using default PCI settings
[18144.747275] pci 0000:00:02.0: no hotplug settings from platform
[18144.747277] pci 0000:00:02.0: using default PCI settings
[18144.750997] e1000 0000:00:03.0: no hotplug settings from platform
[18144.751008] e1000 0000:00:03.0: using default PCI settings
[18144.751056] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[18144.751058] sym53c8xx 0000:00:04.0: using default PCI settings
[18144.751105] pci 0000:00:05.0: no hotplug settings from platform
[18144.751107] pci 0000:00:05.0: using default PCI settings
[18144.761058] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[18144.761297] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[18144.761362] virtio-pci 0000:00:05.0: setting latency timer to 64
[18144.761706] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[18144.761728] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[18144.762418]  vdaa: unknown partition table
[18182.248426] udev: starting version 151
[18214.777754] udev: starting version 151
[18220.358032] virtio-pci 0000:00:05.0: PCI INT A disabled
[18226.748095] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[18226.748131] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[18226.748576] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[18226.748598] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[18226.748602] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[18226.748620] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[18226.748626] pci 0000:00:00.0: no hotplug settings from platform
[18226.748628] pci 0000:00:00.0: using default PCI settings
[18226.748665] pci 0000:00:01.0: no hotplug settings from platform
[18226.748666] pci 0000:00:01.0: using default PCI settings
[18226.748706] ata_piix 0000:00:01.1: no hotplug settings from platform
[18226.748707] ata_piix 0000:00:01.1: using default PCI settings
[18226.748747] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[18226.748748] uhci_hcd 0000:00:01.2: using default PCI settings
[18226.748788] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[18226.748789] piix4_smbus 0000:00:01.3: using default PCI settings
[18226.748825] pci 0000:00:02.0: no hotplug settings from platform
[18226.748826] pci 0000:00:02.0: using default PCI settings
[18226.752514] e1000 0000:00:03.0: no hotplug settings from platform
[18226.752526] e1000 0000:00:03.0: using default PCI settings
[18226.752576] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[18226.752577] sym53c8xx 0000:00:04.0: using default PCI settings
[18226.752626] pci 0000:00:05.0: no hotplug settings from platform
[18226.752627] pci 0000:00:05.0: using default PCI settings
[18226.762925] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[18226.763000] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[18226.763064] virtio-pci 0000:00:05.0: setting latency timer to 64
[18226.763412] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[18226.763434] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[18226.764156]  vdab: unknown partition table
[18377.029777] udev: starting version 151
[18380.662461] virtio-pci 0000:00:05.0: PCI INT A disabled
[18392.969533] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[18392.969569] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[18392.970354] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[18392.970417] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[18392.970421] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[18392.970440] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[18392.970458] pci 0000:00:00.0: no hotplug settings from platform
[18392.970460] pci 0000:00:00.0: using default PCI settings
[18392.970498] pci 0000:00:01.0: no hotplug settings from platform
[18392.970500] pci 0000:00:01.0: using default PCI settings
[18392.970536] ata_piix 0000:00:01.1: no hotplug settings from platform
[18392.970538] ata_piix 0000:00:01.1: using default PCI settings
[18392.970574] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[18392.970576] uhci_hcd 0000:00:01.2: using default PCI settings
[18392.970611] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[18392.970613] piix4_smbus 0000:00:01.3: using default PCI settings
[18392.970648] pci 0000:00:02.0: no hotplug settings from platform
[18392.970650] pci 0000:00:02.0: using default PCI settings
[18392.976396] e1000 0000:00:03.0: no hotplug settings from platform
[18392.976409] e1000 0000:00:03.0: using default PCI settings
[18392.976458] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[18392.976459] sym53c8xx 0000:00:04.0: using default PCI settings
[18392.976508] pci 0000:00:05.0: no hotplug settings from platform
[18392.976509] pci 0000:00:05.0: using default PCI settings
[18392.986869] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[18392.986945] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[18392.987005] virtio-pci 0000:00:05.0: setting latency timer to 64
[18392.987349] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[18392.987368] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[18392.988055]  vdac: unknown partition table
[18451.447206] udev: starting version 151
[18454.579394] virtio-pci 0000:00:05.0: PCI INT A disabled
[18457.205170] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[18457.205206] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[18457.205668] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[18457.205690] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[18457.205694] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[18457.205712] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[18457.205718] pci 0000:00:00.0: no hotplug settings from platform
[18457.205720] pci 0000:00:00.0: using default PCI settings
[18457.205756] pci 0000:00:01.0: no hotplug settings from platform
[18457.205758] pci 0000:00:01.0: using default PCI settings
[18457.205797] ata_piix 0000:00:01.1: no hotplug settings from platform
[18457.205799] ata_piix 0000:00:01.1: using default PCI settings
[18457.205838] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[18457.205839] uhci_hcd 0000:00:01.2: using default PCI settings
[18457.205879] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[18457.205880] piix4_smbus 0000:00:01.3: using default PCI settings
[18457.205916] pci 0000:00:02.0: no hotplug settings from platform
[18457.205917] pci 0000:00:02.0: using default PCI settings
[18457.212044] e1000 0000:00:03.0: no hotplug settings from platform
[18457.212056] e1000 0000:00:03.0: using default PCI settings
[18457.212104] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[18457.212106] sym53c8xx 0000:00:04.0: using default PCI settings
[18457.212154] pci 0000:00:05.0: no hotplug settings from platform
[18457.212155] pci 0000:00:05.0: using default PCI settings
[18457.222963] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[18457.223036] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[18457.223099] virtio-pci 0000:00:05.0: setting latency timer to 64
[18457.223444] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[18457.223485] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[18457.224172]  vdad: unknown partition table
[18557.035889] udev: starting version 151
[18559.986148] virtio-pci 0000:00:05.0: PCI INT A disabled
[18565.008867] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[18565.008903] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[18565.009332] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[18565.009354] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[18565.009358] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[18565.009377] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[18565.009382] pci 0000:00:00.0: no hotplug settings from platform
[18565.009384] pci 0000:00:00.0: using default PCI settings
[18565.009421] pci 0000:00:01.0: no hotplug settings from platform
[18565.009423] pci 0000:00:01.0: using default PCI settings
[18565.009459] ata_piix 0000:00:01.1: no hotplug settings from platform
[18565.009461] ata_piix 0000:00:01.1: using default PCI settings
[18565.009497] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[18565.009499] uhci_hcd 0000:00:01.2: using default PCI settings
[18565.009535] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[18565.009537] piix4_smbus 0000:00:01.3: using default PCI settings
[18565.009573] pci 0000:00:02.0: no hotplug settings from platform
[18565.009574] pci 0000:00:02.0: using default PCI settings
[18565.017126] e1000 0000:00:03.0: no hotplug settings from platform
[18565.017138] e1000 0000:00:03.0: using default PCI settings
[18565.017187] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[18565.017188] sym53c8xx 0000:00:04.0: using default PCI settings
[18565.017237] pci 0000:00:05.0: no hotplug settings from platform
[18565.017239] pci 0000:00:05.0: using default PCI settings
[18565.028625] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[18565.028698] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[18565.028756] virtio-pci 0000:00:05.0: setting latency timer to 64
[18565.029095] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[18565.029118] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[18565.029735]  vdae: unknown partition table
[18606.104681] udev: starting version 151
[18608.636965] virtio-pci 0000:00:05.0: PCI INT A disabled
[18612.108446] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[18612.108482] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[18612.108934] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[18612.108955] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[18612.108959] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[18612.108978] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[18612.108983] pci 0000:00:00.0: no hotplug settings from platform
[18612.108985] pci 0000:00:00.0: using default PCI settings
[18612.109022] pci 0000:00:01.0: no hotplug settings from platform
[18612.109024] pci 0000:00:01.0: using default PCI settings
[18612.109063] ata_piix 0000:00:01.1: no hotplug settings from platform
[18612.109065] ata_piix 0000:00:01.1: using default PCI settings
[18612.109105] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[18612.109106] uhci_hcd 0000:00:01.2: using default PCI settings
[18612.109146] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[18612.109148] piix4_smbus 0000:00:01.3: using default PCI settings
[18612.109183] pci 0000:00:02.0: no hotplug settings from platform
[18612.109185] pci 0000:00:02.0: using default PCI settings
[18612.115082] e1000 0000:00:03.0: no hotplug settings from platform
[18612.115094] e1000 0000:00:03.0: using default PCI settings
[18612.115143] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[18612.115163] sym53c8xx 0000:00:04.0: using default PCI settings
[18612.115211] pci 0000:00:05.0: no hotplug settings from platform
[18612.115213] pci 0000:00:05.0: using default PCI settings
[18612.131575] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[18612.131650] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[18612.131719] virtio-pci 0000:00:05.0: setting latency timer to 64
[18612.132092] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[18612.132115] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[18612.152749]  vdaf: unknown partition table
[18792.354034] udev: starting version 151
[18794.719123] virtio-pci 0000:00:05.0: PCI INT A disabled
[18800.982216] pci 0000:00:05.0: reg 10: [io  0x0000-0x003f]
[18800.982252] pci 0000:00:05.0: reg 14: [mem 0x00000000-0x00000fff]
[18800.982688] pci 0000:00:05.0: BAR 1: assigned [mem 0x0c000000-0x0c000fff]
[18800.982709] pci 0000:00:05.0: BAR 1: set to [mem 0x0c000000-0x0c000fff] (PCI address [0xc000000-0xc000fff]
[18800.982713] pci 0000:00:05.0: BAR 0: assigned [io  0x1000-0x103f]
[18800.982731] pci 0000:00:05.0: BAR 0: set to [io  0x1000-0x103f] (PCI address [0x1000-0x103f]
[18800.982737] pci 0000:00:00.0: no hotplug settings from platform
[18800.982739] pci 0000:00:00.0: using default PCI settings
[18800.982775] pci 0000:00:01.0: no hotplug settings from platform
[18800.982777] pci 0000:00:01.0: using default PCI settings
[18800.982813] ata_piix 0000:00:01.1: no hotplug settings from platform
[18800.982814] ata_piix 0000:00:01.1: using default PCI settings
[18800.982850] uhci_hcd 0000:00:01.2: no hotplug settings from platform
[18800.982852] uhci_hcd 0000:00:01.2: using default PCI settings
[18800.982901] piix4_smbus 0000:00:01.3: no hotplug settings from platform
[18800.982903] piix4_smbus 0000:00:01.3: using default PCI settings
[18800.982939] pci 0000:00:02.0: no hotplug settings from platform
[18800.982940] pci 0000:00:02.0: using default PCI settings
[18800.988747] e1000 0000:00:03.0: no hotplug settings from platform
[18800.988761] e1000 0000:00:03.0: using default PCI settings
[18800.988810] sym53c8xx 0000:00:04.0: no hotplug settings from platform
[18800.988812] sym53c8xx 0000:00:04.0: using default PCI settings
[18800.988861] pci 0000:00:05.0: no hotplug settings from platform
[18800.988862] pci 0000:00:05.0: using default PCI settings
[18800.998779] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003)
[18800.998862] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
[18800.998926] virtio-pci 0000:00:05.0: setting latency timer to 64
[18800.999297] virtio-pci 0000:00:05.0: irq 24 for MSI/MSI-X
[18800.999319] virtio-pci 0000:00:05.0: irq 25 for MSI/MSI-X
[18800.999982]  vdag: unknown partition table