[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-21-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Oct 21 23:43:45 UTC 2008 (Ubuntu 2.6.24-21.43-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe6d800 (usable) [ 0.000000] BIOS-e820: 000000007fe6d800 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 523885) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 523885 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 523885 [ 0.000000] On node 0 totalpages: 523885 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2300 pages used for memmap [ 0.000000] HighMem zone: 292209 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FBBF0 checksum 0 [ 0.000000] ACPI: RSDP 000FBBF0, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 7FE6F200, 005C (r1 DELL M08 27D70B05 ASL 61) [ 0.000000] ACPI: FACP 7FE6F09C, 00F4 (r4 DELL M08 27D70B05 ASL 61) [ 0.000000] ACPI: DSDT 7FE6F800, 565E (r2 INT430 SYSFexxx 1001 INTL 20050624) [ 0.000000] ACPI: FACS 7FE7E000, 0040 [ 0.000000] ACPI: HPET 7FE6F300, 0038 (r1 DELL M08 1 ASL 61) [ 0.000000] ACPI: APIC 7FE6F400, 0068 (r1 DELL M08 27D70B05 ASL 47) [ 0.000000] ACPI: MCFG 7FE6F3C0, 003E (r16 DELL M08 27D70B05 ASL 61) [ 0.000000] ACPI: SLIC 7FE6F49C, 0176 (r1 DELL M08 27D70B05 ASL 61) [ 0.000000] ACPI: BOOT 7FE6EFC0, 0028 (r1 DELL M08 27D70B05 ASL 61) [ 0.000000] ACPI: SSDT 7FE6D9BC, 04CC (r1 PmRef CpuPm 3000 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:74000000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519793 [ 0.000000] Kernel command line: root=UUID=1ad7f204-4c24-400f-a0f5-b1466e76fadd ro splash vga=792 [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1994.539 MHz processor. [ 12.176759] Console: colour dummy device 80x25 [ 12.176763] console [tty0] enabled [ 12.177135] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 12.177403] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 12.256410] Memory: 2064808k/2095540k available (2177k kernel code, 29508k reserved, 1005k data, 368k init, 1178036k highmem) [ 12.256422] virtual kernel memory layout: [ 12.256423] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 12.256424] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 12.256425] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 12.256426] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 12.256426] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 12.256427] .data : 0xc03205e4 - 0xc041bdc4 (1005 kB) [ 12.256428] .text : 0xc0100000 - 0xc03205e4 (2177 kB) [ 12.256443] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 12.256483] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 12.256614] hpet clockevent registered [ 12.336553] Calibrating delay using timer specific routine.. 3993.42 BogoMIPS (lpj=7986858) [ 12.336576] Security Framework initialized [ 12.336583] SELinux: Disabled at boot. [ 12.336595] AppArmor: AppArmor initialized [ 12.336600] Failure registering capabilities with primary security module. [ 12.336609] Mount-cache hash table entries: 512 [ 12.336721] Initializing cgroup subsys ns [ 12.336728] Initializing cgroup subsys cpuacct [ 12.336739] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001 [ 12.336745] monitor/mwait feature present. [ 12.336748] using mwait in idle threads. [ 12.336753] CPU: L1 I cache: 32K, L1 D cache: 32K [ 12.336757] CPU: L2 cache: 2048K [ 12.336760] CPU: Physical Processor ID: 0 [ 12.336763] CPU: Processor Core ID: 0 [ 12.336765] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e3bd 00000000 00000001 00000001 [ 12.336773] Compat vDSO mapped to ffffe000. [ 12.336785] Checking 'hlt' instruction... OK. [ 12.352882] SMP alternatives: switching to UP code [ 12.354297] Early unpacking initramfs... done [ 12.652757] ACPI: Core revision 20070126 [ 12.652796] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 12.656249] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d [ 12.656265] SMP alternatives: switching to SMP code [ 12.656890] Booting processor 1/1 eip 3000 [ 12.667055] Initializing CPU#1 [ 12.744203] Calibrating delay using timer specific routine.. 3988.85 BogoMIPS (lpj=7977705) [ 12.744209] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001 [ 12.744214] monitor/mwait feature present. [ 12.744216] CPU: L1 I cache: 32K, L1 D cache: 32K [ 12.744218] CPU: L2 cache: 2048K [ 12.744220] CPU: Physical Processor ID: 0 [ 12.744221] CPU: Processor Core ID: 1 [ 12.744222] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e3bd 00000000 00000001 00000001 [ 12.744687] CPU1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d [ 12.744719] Total of 2 processors activated (7982.28 BogoMIPS). [ 12.744919] ENABLING IO-APIC IRQs [ 12.745108] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 12.892175] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 12.912174] Brought up 2 CPUs [ 12.912196] CPU0 attaching sched-domain: [ 12.912198] domain 0: span 03 [ 12.912200] groups: 01 02 [ 12.912203] CPU1 attaching sched-domain: [ 12.912204] domain 0: span 03 [ 12.912205] groups: 02 01 [ 12.912387] net_namespace: 64 bytes [ 12.912399] Booting paravirtualized kernel on bare hardware [ 12.912794] Time: 17:35:24 Date: 06/07/10 [ 12.912819] NET: Registered protocol family 16 [ 12.912975] EISA bus registered [ 12.912981] ACPI: bus type pci registered [ 12.923623] PCI: PCI BIOS revision 2.10 entry at 0xfad46, last bus=14 [ 12.923627] PCI: Using configuration type 1 [ 12.923641] Setting up standard PCI resources [ 12.931042] ACPI: EC: Look up EC in DSDT [ 12.972609] ACPI: Interpreter enabled [ 12.972614] ACPI: (supports S0 S3 S4 S5) [ 12.972627] ACPI: Using IOAPIC for interrupt routing [ 12.992074] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 12.992998] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 12.993005] PCI quirk: region 1080-10bf claimed by ICH6 GPIO [ 12.994438] PCI: Transparent bridge - 0000:00:1e.0 [ 12.994486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 12.994882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 12.995019] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 12.995110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 12.995219] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 12.995325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 13.005036] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *7 [ 13.005144] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 13.005249] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4 [ 13.005353] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11) [ 13.005458] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 13.005567] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 13.005674] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 13.005773] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 13.005903] Linux Plug and Play Support v0.97 (c) Adam Belay [ 13.005931] pnp: PnP ACPI init [ 13.005939] ACPI: bus type pnp registered [ 13.042590] pnpacpi: exceeded the max number of mem resources: 12 [ 13.042777] pnp: PnP ACPI: found 12 devices [ 13.042781] ACPI: ACPI bus type pnp unregistered [ 13.042785] PnPBIOS: Disabled by ACPI PNP [ 13.042959] PCI: Using ACPI for IRQ routing [ 13.042964] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 13.127890] NET: Registered protocol family 8 [ 13.127893] NET: Registered protocol family 20 [ 13.127922] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 13.127928] hpet0: 3 64-bit timers, 14318180 Hz [ 13.128959] AppArmor: AppArmor Filesystem Enabled [ 13.131881] Time: tsc clocksource has been installed. [ 13.131889] Switched to high resolution mode on CPU 0 [ 13.131983] Switched to high resolution mode on CPU 1 [ 13.147855] system 00:05: ioport range 0xc80-0xcff could not be reserved [ 13.147864] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved [ 13.147872] system 00:09: ioport range 0x900-0x97f has been reserved [ 13.147876] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 13.147881] system 00:09: ioport range 0x1000-0x1005 has been reserved [ 13.147885] system 00:09: ioport range 0x1008-0x100f has been reserved [ 13.147891] system 00:0a: ioport range 0xf400-0xf4fe has been reserved [ 13.147896] system 00:0a: ioport range 0x1006-0x1007 has been reserved [ 13.147900] system 00:0a: ioport range 0x100a-0x1059 could not be reserved [ 13.147904] system 00:0a: ioport range 0x1060-0x107f has been reserved [ 13.147908] system 00:0a: ioport range 0x1080-0x10bf has been reserved [ 13.147912] system 00:0a: ioport range 0x10c0-0x10df has been reserved [ 13.147916] system 00:0a: ioport range 0x1010-0x102f has been reserved [ 13.147920] system 00:0a: ioport range 0x809-0x809 has been reserved [ 13.147927] system 00:0b: iomem range 0x0-0x9efff could not be reserved [ 13.147931] system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved [ 13.147936] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved [ 13.147940] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 13.147944] system 00:0b: iomem range 0x100000-0x7fe6d7ff could not be reserved [ 13.147949] system 00:0b: iomem range 0x7fe6d800-0x7fefffff could not be reserved [ 13.147954] system 00:0b: iomem range 0x7ff00000-0x7fffffff could not be reserved [ 13.147959] system 00:0b: iomem range 0x7ff00000-0x806fffff could not be reserved [ 13.147964] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved [ 13.147969] system 00:0b: iomem range 0xffa00000-0xffafffff has been reserved [ 13.147973] system 00:0b: iomem range 0xfec00000-0xfec0ffff could not be reserved [ 13.147978] system 00:0b: iomem range 0xfee00000-0xfee0ffff could not be reserved [ 13.178310] PCI: Bridge: 0000:00:01.0 [ 13.178314] IO window: e000-efff [ 13.178318] MEM window: fa000000-feafffff [ 13.178322] PREFETCH window: e0000000-efffffff [ 13.178327] PCI: Bridge: 0000:00:1c.0 [ 13.178329] IO window: disabled. [ 13.178336] MEM window: disabled. [ 13.178341] PREFETCH window: disabled. [ 13.178348] PCI: Bridge: 0000:00:1c.1 [ 13.178351] IO window: disabled. [ 13.178358] MEM window: f9f00000-f9ffffff [ 13.178363] PREFETCH window: disabled. [ 13.178370] PCI: Bridge: 0000:00:1c.3 [ 13.178374] IO window: d000-dfff [ 13.178381] MEM window: f9c00000-f9efffff [ 13.178387] PREFETCH window: f0000000-f01fffff [ 13.178394] PCI: Bridge: 0000:00:1e.0 [ 13.178397] IO window: disabled. [ 13.178404] MEM window: f9b00000-f9bfffff [ 13.178409] PREFETCH window: disabled. [ 13.178427] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 13.178434] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 13.178457] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 13.178465] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 13.178489] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 13.178497] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 13.178521] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 [ 13.178529] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 13.178543] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 13.178553] NET: Registered protocol family 2 [ 13.215821] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 13.216007] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 13.216368] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 13.216555] TCP: Hash tables configured (established 131072 bind 65536) [ 13.216559] TCP reno registered [ 13.227875] checking if image is initramfs... it is [ 13.816362] Freeing initrd memory: 8126k freed [ 13.816500] Simple Boot Flag at 0x79 set to 0x1 [ 13.817009] audit: initializing netlink socket (disabled) [ 13.817024] audit(1275932124.437:1): initialized [ 13.817206] highmem bounce pool size: 64 pages [ 13.818798] VFS: Disk quotas dquot_6.5.1 [ 13.818863] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 13.818972] io scheduler noop registered [ 13.818976] io scheduler anticipatory registered [ 13.818979] io scheduler deadline registered [ 13.818992] io scheduler cfq registered (default) [ 13.819147] Boot video device is 0000:01:00.0 [ 13.819239] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 13.819273] assign_interrupt_mode Found MSI capability [ 13.819312] Allocate Port Service[0000:00:01.0:pcie00] [ 13.819340] Allocate Port Service[0000:00:01.0:pcie02] [ 13.819410] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 13.819469] assign_interrupt_mode Found MSI capability [ 13.819518] Allocate Port Service[0000:00:1c.0:pcie00] [ 13.819543] Allocate Port Service[0000:00:1c.0:pcie02] [ 13.819638] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 13.819697] assign_interrupt_mode Found MSI capability [ 13.819746] Allocate Port Service[0000:00:1c.1:pcie00] [ 13.819772] Allocate Port Service[0000:00:1c.1:pcie02] [ 13.819866] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 13.819926] assign_interrupt_mode Found MSI capability [ 13.819974] Allocate Port Service[0000:00:1c.3:pcie00] [ 13.820002] Allocate Port Service[0000:00:1c.3:pcie02] [ 13.820221] isapnp: Scanning for PnP cards... [ 14.174458] isapnp: No Plug & Play device found [ 14.194636] Real Time Clock Driver v1.12ac [ 14.194766] hpet_resources: 0xfed00000 is busy [ 14.194820] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 14.195773] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 14.195830] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 14.195910] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 14.199274] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 14.199280] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 14.231000] mice: PS/2 mouse device common for all mice [ 14.231094] EISA: Probing bus 0 at eisa.0 [ 14.231152] EISA: Mainboard EG_FFFF detected. [ 14.231182] Cannot allocate resource for EISA slot 1 [ 14.231214] EISA: Detected 0 cards. [ 14.231218] cpuidle: using governor ladder [ 14.231221] cpuidle: using governor menu [ 14.231292] NET: Registered protocol family 1 [ 14.231318] Using IPI No-Shortcut mode [ 14.231351] registered taskstats version 1 [ 14.231460] Magic number: 14:357:592 [ 14.231527] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 14.231531] EDD information not available. [ 14.231682] Freeing unused kernel memory: 368k freed [ 14.231705] Write protecting the kernel read-only data: 801k [ 14.234685] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 14.290686] vesafb: framebuffer at 0xfb000000, mapped to 0xf8880000, using 6144k, total 14336k [ 14.290696] vesafb: mode is 1024x768x32, linelength=4096, pages=1 [ 14.290700] vesafb: protected mode interface info at c000:b7a0 [ 14.290704] vesafb: pmi: set display start = c00cb803, set palette = c00cb85e [ 14.290707] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 14.290722] vesafb: scrolling: redraw [ 14.290725] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 14.290822] Console: switching to colour frame buffer device 128x48 [ 14.338936] fb0: VESA VGA frame buffer device [ 14.488426] fuse init (API version 7.9) [ 14.496613] ACPI: SSDT 7FE6E4F2, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624) [ 14.496794] ACPI: SSDT 7FE6DE88, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624) [ 14.497309] Monitor-Mwait will be used to enter C-1 state [ 14.497311] Monitor-Mwait will be used to enter C-2 state [ 14.497313] Monitor-Mwait will be used to enter C-3 state [ 14.497419] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 14.497424] ACPI: Processor [CPU0] (supports 8 throttling states) [ 14.497611] ACPI: SSDT 7FE6E778, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624) [ 14.497777] ACPI: SSDT 7FE6E46D, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624) [ 14.498437] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 14.498442] ACPI: Processor [CPU1] (supports 8 throttling states) [ 14.504262] ACPI: Thermal Zone [THM] (47 C) [ 14.624099] usbcore: registered new interface driver usbfs [ 14.624121] usbcore: registered new interface driver hub [ 14.624547] usbcore: registered new device driver usb [ 14.625986] USB Universal Host Controller Interface driver v3.0 [ 14.626034] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 14.626045] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 14.626050] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 14.626262] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 14.626294] uhci_hcd 0000:00:1a.0: irq 19, io base 0x00006f20 [ 14.626409] usb usb1: configuration #1 chosen from 1 choice [ 14.626428] hub 1-0:1.0: USB hub found [ 14.626433] hub 1-0:1.0: 2 ports detected [ 14.651300] SCSI subsystem initialized [ 14.661017] libata version 3.00 loaded. [ 14.730664] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 14.730682] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 14.730690] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 14.730710] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 14.730766] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00006f00 [ 14.730881] usb usb2: configuration #1 chosen from 1 choice [ 14.730900] hub 2-0:1.0: USB hub found [ 14.730905] hub 2-0:1.0: 2 ports detected [ 14.834608] ahci 0000:00:1f.2: version 3.0 [ 14.834641] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 [ 14.834696] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x5) don't match, using nr_ports [ 14.834698] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7 [ 14.970357] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 15.106048] usb 1-2: configuration #1 chosen from 1 choice [ 15.107527] hub 1-2:1.0: USB hub found [ 15.108695] hub 1-2:1.0: 3 ports detected [ 15.378015] Clocksource tsc unstable (delta = -3414235712 ns) [ 15.382002] Time: hpet clocksource has been installed. [ 15.384163] usb 1-2.1: new full speed USB device using uhci_hcd and address 3 [ 15.431169] usb 1-2.1: configuration #1 chosen from 1 choice [ 15.514004] usb 1-2.2: new full speed USB device using uhci_hcd and address 4 [ 15.555473] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 15.555478] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 15.555486] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 15.555743] scsi0 : ahci [ 15.555851] scsi1 : ahci [ 15.555942] scsi2 : ahci [ 15.556177] ata1: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfb900 irq 219 [ 15.556181] ata2: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfb980 irq 219 [ 15.556184] ata3: SATA max UDMA/133 abar m2048@0xfebfb800 port 0xfebfba00 irq 219 [ 15.561243] usb 1-2.2: configuration #1 chosen from 1 choice [ 15.647662] usb 1-2.3: new full speed USB device using uhci_hcd and address 5 [ 15.697828] usb 1-2.3: configuration #1 chosen from 1 choice [ 15.717208] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 15.768404] ata1.00: ATA-8: WDC WD2500BEVS-75UST0, 01.01A01, max UDMA/133 [ 15.768409] ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32) [ 15.769351] ata1.00: configured for UDMA/133 [ 15.794551] ata2: SATA link down (SStatus 0 SControl 0) [ 15.816785] ata3: SATA link down (SStatus 0 SControl 300) [ 15.816982] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-7 01.0 PQ: 0 ANSI: 5 [ 15.817185] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 21 [ 15.817199] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 15.817203] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 15.817226] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 15.821136] ehci_hcd 0000:00:1a.7: debug port 1 [ 15.821143] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 15.821152] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfed1c400 [ 15.826169] Driver 'sd' needs updating - please use bus_type methods [ 15.827592] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 15.827610] sd 0:0:0:0: [sda] Write Protect is off [ 15.827614] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.827637] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.827686] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 15.827694] sd 0:0:0:0: [sda] Write Protect is off [ 15.827696] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 15.827710] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 15.827713] sda:<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 15.831628] usb usb3: configuration #1 chosen from 1 choice [ 15.831649] hub 3-0:1.0: USB hub found [ 15.831654] hub 3-0:1.0: 4 ports detected [ 15.875696] sda1 sda2 < sda5 > [ 15.907361] sd 0:0:0:0: [sda] Attached SCSI disk [ 15.909769] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.935523] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 [ 15.935537] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 15.935541] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 15.935562] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 15.939478] ehci_hcd 0000:00:1d.7: debug port 1 [ 15.939485] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 15.939490] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfed1c000 [ 15.955368] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 15.955509] usb usb4: configuration #1 chosen from 1 choice [ 15.955530] hub 4-0:1.0: USB hub found [ 15.955535] hub 4-0:1.0: 6 ports detected [ 16.041585] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 16.041599] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 16.041603] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 16.041624] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 16.041652] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00006f80 [ 16.041757] usb usb5: configuration #1 chosen from 1 choice [ 16.041777] hub 5-0:1.0: USB hub found [ 16.041781] hub 5-0:1.0: 2 ports detected [ 16.054812] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20 [ 16.054822] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 16.054826] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 16.054845] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 16.054871] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006f60 [ 16.054970] usb usb6: configuration #1 chosen from 1 choice [ 16.054990] hub 6-0:1.0: USB hub found [ 16.054995] hub 6-0:1.0: 2 ports detected [ 16.062525] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21 [ 16.062536] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 16.062541] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 16.062576] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 16.062602] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006f40 [ 16.062701] usb usb7: configuration #1 chosen from 1 choice [ 16.062721] hub 7-0:1.0: USB hub found [ 16.062725] hub 7-0:1.0: 2 ports detected [ 16.072206] ata_piix 0000:00:1f.1: version 2.12 [ 16.072218] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 [ 16.072251] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 16.072306] scsi3 : ata_piix [ 16.072725] scsi4 : ata_piix [ 16.073314] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14 [ 16.073316] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15 [ 16.116645] usb 4-6: new high speed USB device using ehci_hcd and address 3 [ 16.223987] ata4.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, D300, max UDMA/33 [ 16.252666] usb 4-6: configuration #1 chosen from 1 choice [ 16.253277] usb 1-2: USB disconnect, address 2 [ 16.253287] usb 1-2.1: USB disconnect, address 3 [ 16.253883] usb 1-2.2: USB disconnect, address 4 [ 16.254011] usb 1-2.3: USB disconnect, address 5 [ 16.254154] usbcore: registered new interface driver hiddev [ 16.400467] ata4.00: configured for UDMA/33 [ 16.400558] ata5: port disabled. ignoring. [ 16.401667] scsi 3:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H D300 PQ: 0 ANSI: 5 [ 16.401765] scsi 3:0:0:0: Attached scsi generic sg1 type 5 [ 16.401836] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 16.454491] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f9bfd800-f9bfdfff] Max Packet=[2048] IR/IT contexts=[4/4] [ 16.458628] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 16.467987] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243) [ 16.467999] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243) [ 16.468008] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243) [ 16.476824] usb 1-2: new full speed USB device using uhci_hcd and address 6 [ 16.478081] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0 [ 16.478116] b44.c:v2.0 [ 16.481503] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:1d:09:be:c7:d1 [ 16.488619] Driver 'sr' needs updating - please use bus_type methods [ 16.499272] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 16.499277] Uniform CD-ROM driver Revision: 3.20 [ 16.499337] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 16.531788] usb 1-2: configuration #1 chosen from 1 choice [ 16.531985] hub 1-2:1.0: USB hub found [ 16.533259] hub 1-2:1.0: 3 ports detected [ 16.564709] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 16.578697] usb 5-1: configuration #1 chosen from 1 choice [ 16.585346] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input2 [ 16.588198] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1 [ 16.588222] usbcore: registered new interface driver usbhid [ 16.588227] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 16.624495] Attempting manual resume [ 16.624498] swsusp: Resume From Partition 8:5 [ 16.624500] PM: Checking swsusp image. [ 16.624643] PM: Resume from disk failed. [ 16.695273] kjournald starting. Commit interval 5 seconds [ 16.695283] EXT3-fs: mounted filesystem with ordered data mode. [ 16.839609] usb 1-2.1: new full speed USB device using uhci_hcd and address 7 [ 16.970586] usb 1-2.1: configuration #1 chosen from 1 choice [ 17.021577] ieee1394: Host added: ID:BUS[0-00:1023] GUID[434fc00009963470] [ 17.179332] usb 1-2.2: new full speed USB device using uhci_hcd and address 8 [ 17.308351] usb 1-2.2: configuration #1 chosen from 1 choice [ 17.314477] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2.2/1-2.2:1.0/input/input3 [ 17.328926] input,hidraw1: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2 [ 17.530053] usb 1-2.3: new full speed USB device using uhci_hcd and address 9 [ 17.661076] usb 1-2.3: configuration #1 chosen from 1 choice [ 17.668223] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb1/1-2/1-2.3/1-2.3:1.0/input/input4 [ 17.677630] input,hidraw2: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3 [ 27.011252] udev: starting version 141 [ 27.485728] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 27.621860] ACPI: AC Adapter [AC] (on-line) [ 27.645922] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input5 [ 27.667626] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 27.677122] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input6 [ 27.689759] iTCO_vendor_support: vendor-support=0 [ 27.690715] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 27.690783] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) [ 27.690821] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 27.704608] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 27.704791] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:02/input/input7 [ 27.736576] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 27.762468] ACPI: Battery Slot [BAT0] (battery present) [ 27.762728] ACPI: WMI-Acer: Mapper loaded [ 27.762790] input: Lid Switch as /devices/virtual/input/input8 [ 27.763240] ACPI: Lid Switch [LID] [ 27.763280] input: Power Button (CM) as /devices/virtual/input/input9 [ 27.775556] ACPI: Power Button (CM) [PBTN] [ 27.775609] input: Sleep Button (CM) as /devices/virtual/input/input10 [ 27.799526] ACPI: Sleep Button (CM) [SBTN] [ 27.811559] Linux agpgart interface v0.102 [ 27.875199] Bluetooth: Core ver 2.11 [ 27.875338] NET: Registered protocol family 31 [ 27.875340] Bluetooth: HCI device and connection manager initialized [ 27.875343] Bluetooth: HCI socket layer initialized [ 28.031408] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 28.065008] Linux video capture interface: v2.00 [ 28.151958] Bluetooth: HCI USB driver ver 2.9 [ 28.153676] usbcore: registered new interface driver hci_usb [ 28.201768] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0 [ 28.201773] iwl3945: Copyright(c) 2003-2007 Intel Corporation [ 28.201922] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 28.201937] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 28.201955] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection [ 28.202942] sdhci: Secure Digital Host Controller Interface driver [ 28.202944] sdhci: Copyright(c) Pierre Ossman [ 28.220964] uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) [ 28.221380] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). [ 28.278578] usbcore: registered new interface driver uvcvideo [ 28.278585] USB Video Class driver (v0.1.0) [ 28.323231] input: PS/2 Mouse as /devices/virtual/input/input12 [ 28.376189] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input13 [ 28.556926] nvidia: module license 'NVIDIA' taints kernel. [ 28.647652] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 22) [ 28.647679] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 22 [ 28.650722] mmc0: SDHCI at 0xf9bfd500 irq 22 DMA [ 28.817115] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 28.817127] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 28.817248] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.05 Tue Jan 22 19:36:58 PST 2008 [ 28.834468] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels [ 28.834816] wmaster0: Selected rate control algorithm 'iwl-3945-rs' [ 28.979094] ip_tables: (C) 2000-2006 Netfilter Core Team [ 29.125340] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 29.175625] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20 [ 29.175646] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 29.712682] lp: driver loaded but no devices found [ 29.773325] ieee1394: raw1394: /dev/raw1394 device initialized [ 30.161594] Adding 6072528k swap on /dev/sda5. Priority:-1 extents:1 across:6072528k [ 30.831546] EXT3 FS on sda1, internal journal [ 32.440363] audit(1275932145.452:2): type=1505 operation="profile_load" info="unsupported interface version" pid=4286 [ 32.485429] audit(1275932145.496:3): type=1505 operation="profile_load" info="unsupported interface version" pid=4292 [ 32.610100] audit(1275932145.620:4): type=1505 operation="profile_load" info="unsupported interface version" pid=4299 [ 32.637672] audit(1275932145.648:5): type=1505 operation="profile_load" info="unsupported interface version" pid=4305 [ 33.700769] No dock devices found. [ 37.164295] NET: Registered protocol family 10 [ 37.164550] lo: Disabled Privacy Extensions [ 38.778527] Bluetooth: L2CAP ver 2.9 [ 38.778531] Bluetooth: L2CAP socket layer initialized [ 38.787679] Bluetooth: BNEP (Ethernet Emulation) ver 1.2 [ 38.787683] Bluetooth: BNEP filters: protocol multicast [ 38.800766] Bridge firewalling registered [ 38.801003] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 38.805714] Bluetooth: SCO (Voice Link) ver 0.6 [ 38.805717] Bluetooth: SCO socket layer initialized [ 38.859587] Bluetooth: RFCOMM socket layer initialized [ 38.859612] Bluetooth: RFCOMM TTY layer initialized [ 38.859616] Bluetooth: RFCOMM ver 1.8 [ 40.063107] ppdev: user-space parallel port driver