[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-21-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #59-Ubuntu SMP Wed Mar 24 07:28:56 UTC 2010 (Ubuntu 2.6.31-21.59-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff60000 (usable) [ 0.000000] BIOS-e820: 000000003ff60000 - 000000003ff77000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff77000 - 000000003ff79000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x3ff60 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03FF80000 mask FFFF80000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003ff60000 (usable) [ 0.000000] modified: 000000003ff60000 - 000000003ff77000 (ACPI data) [ 0.000000] modified: 000000003ff77000 - 000000003ff79000 (ACPI NVS) [ 0.000000] modified: 000000003ff80000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 2f87e000 - 2ffc7c46 [ 0.000000] ACPI: RSDP 000f6d70 00024 (v02 IBM ) [ 0.000000] ACPI: XSDT 3ff6a6cd 0004C (v01 IBM TP-1R 00003190 LTP 00000000) [ 0.000000] ACPI: FACP 3ff6a800 000F4 (v03 IBM TP-1R 00003190 IBM 00000001) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 20090521 tbfadt-527 [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 20090521 tbfadt-558 [ 0.000000] ACPI: DSDT 3ff6a9e7 0C4D5 (v01 IBM TP-1R 00003190 MSFT 0100000E) [ 0.000000] ACPI: FACS 3ff78000 00040 [ 0.000000] ACPI: SSDT 3ff6a9b4 00033 (v01 IBM TP-1R 00003190 MSFT 0100000E) [ 0.000000] ACPI: ECDT 3ff76ebc 00052 (v01 IBM TP-1R 00003190 IBM 00000001) [ 0.000000] ACPI: TCPA 3ff76f0e 00032 (v01 IBM TP-1R 00003190 PTL 00000001) [ 0.000000] ACPI: BOOT 3ff76fd8 00028 (v01 IBM TP-1R 00003190 LTP 00000001) [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008ae160] TEXT DATA BSS ==> [0000100000 - 00008ae160] [ 0.000000] #4 [002f87e000 - 002ffc7c46] RAMDISK ==> [002f87e000 - 002ffc7c46] [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #6 [00008af000 - 00008b2100] BRK ==> [00008af000 - 00008b2100] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ff60 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ff60 [ 0.000000] On node 0 totalpages: 261883 [ 0.000000] free_area_init_node: node 0, pgdat c0788d40, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 271 pages used for memmap [ 0.000000] HighMem zone: 34387 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bf800000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1805000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259836 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-21-generic root=UUID=79b4f802-52fc-4c68-9c8b-09fd671e65fb ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5239680 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ff60) [ 0.000000] Memory: 1017460k/1047936k available (4583k kernel code, 29556k reserved, 2142k data, 544k init, 138632k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0792000 - 0xc081a000 ( 544 kB) [ 0.000000] .data : 0xc0579d78 - 0xc0791848 (2142 kB) [ 0.000000] .text : 0xc0100000 - 0xc0579d78 (4583 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1698.633 MHz processor. [ 0.001001] Console: colour VGA+ 80x25 [ 0.001007] console [tty0] enabled [ 0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 3397.26 BogoMIPS (lpj=6794532) [ 0.004048] Security Framework initialized [ 0.004087] AppArmor: AppArmor initialized [ 0.004098] Mount-cache hash table entries: 512 [ 0.004292] Initializing cgroup subsys ns [ 0.004300] Initializing cgroup subsys cpuacct [ 0.004306] Initializing cgroup subsys memory [ 0.004317] Initializing cgroup subsys devices [ 0.004321] Initializing cgroup subsys freezer [ 0.004324] Initializing cgroup subsys net_cls [ 0.004346] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004350] CPU: L2 cache: 1024K [ 0.004355] mce: CPU supports 5 MCE banks [ 0.004364] ------------[ cut here ]------------ [ 0.004381] WARNING: at /build/buildd/linux-2.6.31/arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x33/0x40() [ 0.004384] Hardware name: 2373GEU [ 0.004386] Modules linked in: [ 0.004392] Pid: 0, comm: swapper Not tainted 2.6.31-21-generic #59-Ubuntu [ 0.004395] Call Trace: [ 0.004409] [] warn_slowpath_common+0x6d/0xa0 [ 0.004414] [] ? native_apic_write_dummy+0x33/0x40 [ 0.004419] [] ? native_apic_write_dummy+0x33/0x40 [ 0.004424] [] warn_slowpath_null+0x15/0x20 [ 0.004428] [] native_apic_write_dummy+0x33/0x40 [ 0.004437] [] intel_init_thermal+0x67/0x1b0 [ 0.004442] [] mce_intel_feature_init+0xb/0x60 [ 0.004447] [] mce_cpu_features+0x10/0x40 [ 0.004456] [] mcheck_init+0x14a/0x188 [ 0.004461] [] ? init_hypervisor+0xb/0x2c [ 0.004465] [] identify_cpu+0x20e/0x21d [ 0.004476] [] identify_boot_cpu+0xd/0x23 [ 0.004481] [] check_bugs+0xb/0xe9 [ 0.004485] [] start_kernel+0x2dc/0x2ec [ 0.004489] [] ? unknown_bootoption+0x0/0x19e [ 0.004494] [] i386_start_kernel+0x7c/0x83 [ 0.004506] ---[ end trace a7919e7f17c0a725 ]--- [ 0.004510] CPU0: Thermal monitoring enabled (TM1) [ 0.004524] Performance Counters: [ 0.004528] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.004530] no hardware sampling interrupt available. [ 0.004533] p6 PMU driver. [ 0.004540] ... version: 0 [ 0.004542] ... bit width: 32 [ 0.004544] ... generic counters: 2 [ 0.004547] ... value mask: 00000000ffffffff [ 0.004549] ... max period: 000000007fffffff [ 0.004551] ... fixed-purpose counters: 0 [ 0.004554] ... counter mask: 0000000000000003 [ 0.004560] Checking 'hlt' instruction... OK. [ 0.020950] SMP alternatives: switching to UP code [ 0.028016] Freeing SMP alternatives: 20k freed [ 0.028030] ACPI: Core revision 20090521 [ 0.047521] ACPI: setting ELCR to 0200 (from 0800) [ 0.048087] weird, boot CPU (#0) not listed by the BIOS. [ 0.048090] SMP motherboard not detected. [ 0.048092] Local APIC not detected. Using dummy APIC emulation. [ 0.048095] SMP disabled [ 0.048269] Brought up 1 CPUs [ 0.048272] Total of 1 processors activated (3397.26 BogoMIPS). [ 0.048287] CPU0 attaching NULL sched-domain. [ 0.048550] Booting paravirtualized kernel on bare hardware [ 0.048856] regulator: core version 0.5 [ 0.048879] Time: 23:34:52 Date: 05/17/10 [ 0.048949] NET: Registered protocol family 16 [ 0.049110] EISA bus registered [ 0.049129] ACPI: bus type pci registered [ 0.049473] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 [ 0.049476] PCI: Using configuration type 1 for base access [ 0.052490] bio: create slab at 0 [ 0.053692] ACPI: EC: EC description table is found, configuring boot EC [ 0.062035] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.073364] ACPI: Interpreter enabled [ 0.073372] ACPI: (supports S0 S3 S4 S5) [ 0.073399] ACPI: Using PIC for interrupt routing [ 0.085061] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.085061] ACPI: EC: driver started in interrupt mode [ 0.088036] ACPI: Power Resource [PUBS] (on) [ 0.089062] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.089090] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.089135] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] [ 0.089251] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f] [ 0.089304] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f] [ 0.089357] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f] [ 0.089418] pci 0000:00:1d.7: reg 10 32bit mmio: [0xc0000000-0xc00003ff] [ 0.089475] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.089481] pci 0000:00:1d.7: PME# disabled [ 0.089569] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.089574] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO [ 0.089599] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.089606] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.089614] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.089621] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.089629] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f] [ 0.089636] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.089687] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f] [ 0.089731] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff] [ 0.089738] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff] [ 0.089745] pci 0000:00:1f.5: reg 18 32bit mmio: [0xc0000c00-0xc0000dff] [ 0.089753] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xc0000800-0xc00008ff] [ 0.089782] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.089787] pci 0000:00:1f.5: PME# disabled [ 0.089817] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff] [ 0.089824] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f] [ 0.089861] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.089866] pci 0000:00:1f.6: PME# disabled [ 0.089902] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] [ 0.089909] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff] [ 0.089915] pci 0000:01:00.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff] [ 0.089931] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.089950] pci 0000:01:00.0: supports D1 D2 [ 0.089985] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff] [ 0.089989] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff] [ 0.089994] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.090029] pci 0000:02:00.0: reg 10 32bit mmio: [0xb0000000-0xb0000fff] [ 0.090049] pci 0000:02:00.0: supports D1 D2 [ 0.090051] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.090056] pci 0000:02:00.0: PME# disabled [ 0.090091] pci 0000:02:00.1: reg 10 32bit mmio: [0xb1000000-0xb1000fff] [ 0.090110] pci 0000:02:00.1: supports D1 D2 [ 0.090113] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.090118] pci 0000:02:00.1: PME# disabled [ 0.090158] pci 0000:02:01.0: reg 10 32bit mmio: [0xc0240000-0xc025ffff] [ 0.090165] pci 0000:02:01.0: reg 14 32bit mmio: [0xc0200000-0xc020ffff] [ 0.090173] pci 0000:02:01.0: reg 18 io port: [0x8000-0x803f] [ 0.090193] pci 0000:02:01.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.090212] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold [ 0.090217] pci 0000:02:01.0: PME# disabled [ 0.090250] pci 0000:02:02.0: reg 10 32bit mmio: [0xc0210000-0xc021ffff] [ 0.090330] pci 0000:00:1e.0: transparent bridge [ 0.090335] pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff] [ 0.090341] pci 0000:00:1e.0: bridge 32bit mmio: [0xc0200000-0xcfffffff] [ 0.090346] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.090385] pci_bus 0000:00: on NUMA node 0 [ 0.090391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.090446] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.090476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.095745] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.095942] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.096153] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.096346] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.096519] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.096694] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.096872] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.097067] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.097316] SCSI subsystem initialized [ 0.097384] libata version 3.00 loaded. [ 0.097477] usbcore: registered new interface driver usbfs [ 0.097506] usbcore: registered new interface driver hub [ 0.097535] usbcore: registered new device driver usb [ 0.097686] ACPI: WMI: Mapper loaded [ 0.097689] PCI: Using ACPI for IRQ routing [ 0.097996] Bluetooth: Core ver 2.15 [ 0.098027] NET: Registered protocol family 31 [ 0.098029] Bluetooth: HCI device and connection manager initialized [ 0.098033] Bluetooth: HCI socket layer initialized [ 0.098036] NetLabel: Initializing [ 0.098038] NetLabel: domain hash size = 128 [ 0.098040] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.098057] NetLabel: unlabeled traffic allowed by default [ 0.100346] pnp: PnP ACPI init [ 0.100378] ACPI: bus type pnp registered [ 0.104595] pnp: PnP ACPI: found 13 devices [ 0.104598] ACPI: ACPI bus type pnp unregistered [ 0.104604] PnPBIOS: Disabled by ACPI PNP [ 0.104621] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.104625] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 0.104629] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 0.104633] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 0.104637] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 0.104641] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 0.104645] system 00:00: iomem range 0xdc000-0xdffff could not be reserved [ 0.104648] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 0.104652] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 0.104656] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 0.104660] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 0.104664] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.104667] system 00:00: iomem range 0x100000-0x3fffffff could not be reserved [ 0.104672] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.104681] system 00:02: ioport range 0x1000-0x107f has been reserved [ 0.104685] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 0.104689] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 0.104692] system 00:02: ioport range 0x1600-0x162f has been reserved [ 0.104696] system 00:02: ioport range 0x1632-0x167f has been reserved [ 0.104700] system 00:02: ioport range 0x1630-0x1631 has been reserved [ 0.139402] AppArmor: AppArmor Filesystem Enabled [ 0.139440] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.139444] pci 0000:00:01.0: IO window: 0x3000-0x3fff [ 0.139449] pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff [ 0.139454] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff [ 0.139463] pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03 [ 0.139467] pci 0000:02:00.0: IO window: 0x004000-0x0040ff [ 0.139472] pci 0000:02:00.0: IO window: 0x004400-0x0044ff [ 0.139477] pci 0000:02:00.0: PREFETCH window: 0xe8000000-0xebffffff [ 0.139483] pci 0000:02:00.0: MEM window: 0xc4000000-0xc7ffffff [ 0.139488] pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07 [ 0.139491] pci 0000:02:00.1: IO window: 0x004800-0x0048ff [ 0.139497] pci 0000:02:00.1: IO window: 0x004c00-0x004cff [ 0.139502] pci 0000:02:00.1: PREFETCH window: 0xec000000-0xefffffff [ 0.139507] pci 0000:02:00.1: MEM window: 0xc8000000-0xcbffffff [ 0.139512] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.139517] pci 0000:00:1e.0: IO window: 0x4000-0x8fff [ 0.139523] pci 0000:00:1e.0: MEM window: 0xc0200000-0xcfffffff [ 0.139528] pci 0000:00:1e.0: PREFETCH window: 0xe8000000-0xefffffff [ 0.139544] pci 0000:00:1e.0: setting latency timer to 64 [ 0.139899] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.139903] PCI: setting IRQ 11 as level-triggered [ 0.139908] pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.140254] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.140259] pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.140268] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.140271] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.140275] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff] [ 0.140278] pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff] [ 0.140282] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff] [ 0.140285] pci_bus 0000:02: resource 0 io: [0x4000-0x8fff] [ 0.140289] pci_bus 0000:02: resource 1 mem: [0xc0200000-0xcfffffff] [ 0.140292] pci_bus 0000:02: resource 2 pref mem [0xe8000000-0xefffffff] [ 0.140295] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.140298] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.140302] pci_bus 0000:03: resource 0 io: [0x4000-0x40ff] [ 0.140305] pci_bus 0000:03: resource 1 io: [0x4400-0x44ff] [ 0.140308] pci_bus 0000:03: resource 2 pref mem [0xe8000000-0xebffffff] [ 0.140312] pci_bus 0000:03: resource 3 mem: [0xc4000000-0xc7ffffff] [ 0.140315] pci_bus 0000:07: resource 0 io: [0x4800-0x48ff] [ 0.140319] pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff] [ 0.140322] pci_bus 0000:07: resource 2 pref mem [0xec000000-0xefffffff] [ 0.140325] pci_bus 0000:07: resource 3 mem: [0xc8000000-0xcbffffff] [ 0.140376] NET: Registered protocol family 2 [ 0.140503] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.140957] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.142554] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.143542] TCP: Hash tables configured (established 131072 bind 65536) [ 0.143547] TCP reno registered [ 0.143713] NET: Registered protocol family 1 [ 0.143817] Trying to unpack rootfs image as initramfs... [ 0.398849] Freeing initrd memory: 7463k freed [ 0.408894] Simple Boot Flag at 0x35 set to 0x1 [ 0.408998] cpufreq-nforce2: No nForce2 chipset. [ 0.409050] Scanning for low memory corruption every 60 seconds [ 0.409203] audit: initializing netlink socket (disabled) [ 0.409242] type=2000 audit(1274139292.407:1): initialized [ 0.420058] highmem bounce pool size: 64 pages [ 0.420066] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.422012] VFS: Disk quotas dquot_6.5.2 [ 0.422092] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.422878] fuse init (API version 7.12) [ 0.422990] msgmni has been set to 1732 [ 0.423227] alg: No test for stdrng (krng) [ 0.423241] io scheduler noop registered [ 0.423243] io scheduler anticipatory registered [ 0.423246] io scheduler deadline registered [ 0.423311] io scheduler cfq registered (default) [ 0.423395] pci 0000:01:00.0: Boot video device [ 0.423517] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.423545] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.424048] ACPI: AC Adapter [AC] (on-line) [ 0.424134] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.424139] ACPI: Power Button [PWRF] [ 0.424196] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.424636] ACPI: Lid Switch [LID] [ 0.424696] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.424702] ACPI: Sleep Button [SLPB] [ 0.426996] Marking TSC unstable due to TSC halts in idle [ 0.427016] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.427046] processor LNXCPU:00: registered as cooling_device0 [ 0.427050] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.428020] Switched to high resolution mode on CPU 0 [ 0.433118] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.433129] ACPI: Thermal Zone [THM0] (50 C) [ 0.433181] isapnp: Scanning for PnP cards... [ 0.786362] isapnp: No Plug & Play device found [ 0.787756] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.788700] serial 00:0a: activated [ 0.788792] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 0.788905] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.788913] serial 0000:00:1f.6: PCI INT B disabled [ 0.790003] brd: module loaded [ 0.790556] loop: module loaded [ 0.790647] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.790777] ata_piix 0000:00:1f.1: version 2.13 [ 0.790786] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.791136] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.791141] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.791187] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.791309] scsi0 : ata_piix [ 0.791416] scsi1 : ata_piix [ 0.792436] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 [ 0.792440] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 [ 0.793476] Fixed MDIO Bus: probed [ 0.793530] PPP generic driver version 2.4.2 [ 0.793636] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.822510] ACPI: Battery Slot [BAT0] (battery present) [ 0.827092] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 0.827429] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 0.827434] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 0.827451] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.827456] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.827497] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.831404] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.831411] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.831420] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000 [ 0.844037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.844141] usb usb1: configuration #1 chosen from 1 choice [ 0.844176] hub 1-0:1.0: USB hub found [ 0.844185] hub 1-0:1.0: 6 ports detected [ 0.844252] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.844277] uhci_hcd: USB Universal Host Controller Interface driver [ 0.844742] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 0.844749] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.844757] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.844761] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.844801] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.844823] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 [ 0.844929] usb usb2: configuration #1 chosen from 1 choice [ 0.844963] hub 2-0:1.0: USB hub found [ 0.844972] hub 2-0:1.0: 2 ports detected [ 0.845386] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0 [ 0.845719] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.845723] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.845730] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.845734] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.845769] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.845791] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 [ 0.845885] usb usb3: configuration #1 chosen from 1 choice [ 0.845915] hub 3-0:1.0: USB hub found [ 0.845923] hub 3-0:1.0: 2 ports detected [ 0.845972] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.845979] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.845983] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.846014] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.846035] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 [ 0.846139] usb usb4: configuration #1 chosen from 1 choice [ 0.846171] hub 4-0:1.0: USB hub found [ 0.846179] hub 4-0:1.0: 2 ports detected [ 0.846285] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.851470] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.851477] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.851546] mice: PS/2 mouse device common for all mice [ 0.851666] rtc_cmos 00:06: RTC can wake from S4 [ 0.851705] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.851725] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.851873] device-mapper: uevent: version 1.0.3 [ 0.851987] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.852103] device-mapper: multipath: version 1.1.0 loaded [ 0.852106] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.852262] EISA: Probing bus 0 at eisa.0 [ 0.852268] Cannot allocate resource for EISA slot 1 [ 0.852271] Cannot allocate resource for EISA slot 2 [ 0.852274] Cannot allocate resource for EISA slot 3 [ 0.852276] Cannot allocate resource for EISA slot 4 [ 0.852279] Cannot allocate resource for EISA slot 5 [ 0.852281] Cannot allocate resource for EISA slot 6 [ 0.852284] Cannot allocate resource for EISA slot 7 [ 0.852286] Cannot allocate resource for EISA slot 8 [ 0.852289] EISA: Detected 0 cards. [ 0.852381] cpuidle: using governor ladder [ 0.852451] cpuidle: using governor menu [ 0.853129] TCP cubic registered [ 0.853351] NET: Registered protocol family 10 [ 0.853906] lo: Disabled Privacy Extensions [ 0.854324] NET: Registered protocol family 17 [ 0.854344] Bluetooth: L2CAP ver 2.13 [ 0.854346] Bluetooth: L2CAP socket layer initialized [ 0.854349] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.854351] Bluetooth: SCO socket layer initialized [ 0.854392] Bluetooth: RFCOMM TTY layer initialized [ 0.854396] Bluetooth: RFCOMM socket layer initialized [ 0.854398] Bluetooth: RFCOMM ver 1.11 [ 0.854558] P-state transition latency capped at 20 uS [ 0.854850] Using IPI No-Shortcut mode [ 0.854921] PM: Resume from disk failed. [ 0.854940] registered taskstats version 1 [ 0.855081] Magic number: 10:740:605 [ 0.855183] rtc_cmos 00:06: setting system clock to 2010-05-17 23:34:53 UTC (1274139293) [ 0.855187] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.855189] EDD information not available. [ 0.857109] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.956593] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4242N, 0201, max UDMA/33 [ 0.957081] ata1.00: ATA-6: HTS721060G9AT00, MC3IA51A, max UDMA/100 [ 0.957085] ata1.00: 117210240 sectors, multi 16: LBA [ 0.972372] ata2.00: configured for UDMA/33 [ 0.972770] ata1.00: configured for UDMA/100 [ 0.972915] scsi 0:0:0:0: Direct-Access ATA HTS721060G9AT00 MC3I PQ: 0 ANSI: 5 [ 0.973058] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.973103] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 0.973155] sd 0:0:0:0: [sda] Write Protect is off [ 0.973159] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.973186] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.973333] sda: [ 0.978607] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4242N 0201 PQ: 0 ANSI: 5 [ 0.991393] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 0.991397] Uniform CD-ROM driver Revision: 3.20 [ 0.991502] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 0.991549] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 0.994673] sda1 sda2 < sda5 > [ 1.018661] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.018679] Freeing unused kernel memory: 544k freed [ 1.019101] Write protecting the kernel text: 4584k [ 1.019147] Write protecting the kernel read-only data: 1840k [ 1.209835] Linux agpgart interface v0.103 [ 1.219358] Floppy drive(s): fd0 is 1.44M [ 1.236361] FDC 0 is a National Semiconductor PC87306 [ 1.263717] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/device:04/input/input5 [ 1.263777] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 1.301280] agpgart-intel 0000:00:00.0: Intel 855PM Chipset [ 1.397001] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.416142] [drm] Initialized drm 1.1.0 20060810 [ 1.452695] [drm] radeon default to kernel modesetting DISABLED. [ 1.452882] pci 0000:01:00.0: power state changed by ACPI to D0 [ 1.452895] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.453583] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 [ 1.461908] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 1.461913] Copyright (c) 1999-2006 Intel Corporation. [ 1.461971] e1000 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.468057] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 1.714766] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:16:41:11:ae:8e [ 1.749973] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 1.836162] usb 4-1: configuration #1 chosen from 1 choice [ 2.943334] PM: Starting manual resume from disk [ 2.943340] PM: Resume from partition 8:5 [ 2.943342] PM: Checking hibernation image. [ 2.943509] PM: Resume from disk failed. [ 2.968728] EXT4-fs (sda1): barriers enabled [ 2.986944] kjournald2 starting: pid 362, dev sda1:8, commit interval 5 seconds [ 2.986981] EXT4-fs (sda1): delayed allocation enabled [ 2.986985] EXT4-fs: file extents enabled [ 2.987172] EXT4-fs: mballoc enabled [ 2.987191] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 3.639065] type=1505 audit(1274139296.280:2): operation="profile_load" pid=386 name=/usr/share/gdm/guest-session/Xsession [ 3.642126] type=1505 audit(1274139296.284:3): operation="profile_load" pid=387 name=/sbin/dhclient3 [ 3.642868] type=1505 audit(1274139296.284:4): operation="profile_load" pid=387 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 3.643271] type=1505 audit(1274139296.284:5): operation="profile_load" pid=387 name=/usr/lib/connman/scripts/dhclient-script [ 3.700557] type=1505 audit(1274139296.344:6): operation="profile_load" pid=388 name=/usr/bin/evince [ 3.713160] type=1505 audit(1274139296.356:7): operation="profile_load" pid=388 name=/usr/bin/evince-previewer [ 3.720650] type=1505 audit(1274139296.364:8): operation="profile_load" pid=388 name=/usr/bin/evince-thumbnailer [ 3.741623] type=1505 audit(1274139296.384:9): operation="profile_load" pid=390 name=/usr/lib/cups/backend/cups-pdf [ 14.359548] udev: starting version 147 [ 14.377761] Adding 2441840k swap on /dev/sda5. Priority:-1 extents:1 across:2441840k [ 14.492173] lp: driver loaded but no devices found [ 14.650502] EXT4-fs (sda1): internal journal on sda1:8 [ 14.691463] irda_init() [ 14.691484] NET: Registered protocol family 23 [ 14.716723] nsc-ircc 00:0c: activated [ 14.716730] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 14.716896] nsc-ircc, chip->init [ 14.716906] nsc-ircc, Found chip at base=0x02e [ 14.716929] nsc-ircc, driver loaded (Dag Brattli) [ 14.717791] IrDA: Registered device irda0 [ 14.717794] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 14.756818] parport_pc 00:0b: reported by Plug and Play ACPI [ 14.756862] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 14.760337] Non-volatile memory driver v1.3 [ 14.807282] thinkpad_acpi: ThinkPad ACPI Extras v0.23 [ 14.807286] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 14.807288] thinkpad_acpi: ThinkPad BIOS 1RETDNWW (3.19 ), EC 1RHT71WW-3.04 [ 14.807291] thinkpad_acpi: IBM ThinkPad T41p, model 2373GEU [ 14.848257] lp0: using parport0 (interrupt-driven). [ 14.889078] Registered led device: tpacpi::thinklight [ 14.889134] Registered led device: tpacpi::power [ 14.889154] Registered led device: tpacpi::standby [ 14.928515] intel_rng: FWH not detected [ 14.931818] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.964535] input: ThinkPad Extra Buttons as /devices/virtual/input/input6 [ 15.000923] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0552] [ 15.000942] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI [ 15.000945] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI [ 15.000950] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21b22, devctl 0x64 [ 15.007656] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 15.007790] usbcore: registered new interface driver btusb [ 15.019326] ppdev: user-space parallel port driver [ 15.033016] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.036396] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX [ 15.040682] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 15.045833] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.080311] cfg80211: Calling CRDA to update world regulatory domain [ 15.158803] cfg80211: World regulatory domain updated: [ 15.158809] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.158813] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.158816] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.158820] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.158823] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.158827] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.236636] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0430, PCI irq 11 [ 15.236642] yenta_cardbus 0000:02:00.0: Socket status: 30000086 [ 15.236650] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff [ 15.236654] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean. [ 15.237946] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 15.237951] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff [ 15.238165] ath5k 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 15.238218] ath5k 0000:02:02.0: registered as 'phy0' [ 15.585345] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 15.585382] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 15.800339] ath: EEPROM regdomain: 0x61 [ 15.800343] ath: EEPROM indicates we should expect a direct regpair map [ 15.800350] ath: Country alpha2 being used: 00 [ 15.800352] ath: Regpair used: 0x61 [ 15.814344] phy0: Selected rate control algorithm 'minstrel' [ 15.815315] Registered led device: ath5k-phy0::rx [ 15.815335] Registered led device: ath5k-phy0::tx [ 15.815340] ath5k phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41) [ 15.815343] ath5k phy0: RF5111 5GHz radio found (0x17) [ 15.815346] ath5k phy0: RF2111 2GHz radio found (0x23) [ 15.816880] yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0552] [ 15.816901] yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI [ 15.816905] yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI [ 15.816911] yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21b22, devctl 0x64 [ 15.884758] __ratelimit: 6 callbacks suppressed [ 15.884763] type=1505 audit(1274139308.528:12): operation="profile_replace" pid=916 name=/usr/share/gdm/guest-session/Xsession [ 15.897696] type=1505 audit(1274139308.540:13): operation="profile_replace" pid=922 name=/sbin/dhclient3 [ 15.898445] type=1505 audit(1274139308.540:14): operation="profile_replace" pid=922 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 15.898854] type=1505 audit(1274139308.540:15): operation="profile_replace" pid=922 name=/usr/lib/connman/scripts/dhclient-script [ 15.917442] type=1505 audit(1274139308.560:16): operation="profile_replace" pid=923 name=/usr/bin/evince [ 15.934677] type=1505 audit(1274139308.576:17): operation="profile_replace" pid=923 name=/usr/bin/evince-previewer [ 15.957929] type=1505 audit(1274139308.600:18): operation="profile_replace" pid=923 name=/usr/bin/evince-thumbnailer [ 15.972957] type=1505 audit(1274139308.616:19): operation="profile_replace" pid=938 name=/usr/lib/cups/backend/cups-pdf [ 15.973841] type=1505 audit(1274139308.616:20): operation="profile_replace" pid=938 name=/usr/sbin/cupsd [ 15.980394] type=1505 audit(1274139308.624:21): operation="profile_replace" pid=942 name=/usr/sbin/tcpdump [ 16.061311] yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0430, PCI irq 11 [ 16.061317] yenta_cardbus 0000:02:00.1: Socket status: 30000086 [ 16.061326] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff [ 16.061332] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff: clean. [ 16.062623] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 16.062627] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff [ 16.223288] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 [ 16.223296] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 16.284520] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 16.500791] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.500795] Bluetooth: BNEP filters: protocol multicast [ 16.517316] intel8x0_measure_ac97_clock: measured 60516 usecs (2915 samples) [ 16.517321] intel8x0: clocking to 48000