[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #33-Ubuntu SMP Wed Apr 28 13:28:05 UTC 2010 (Ubuntu 2.6.32-22.33-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=60fc39c5-75f4-44ce-b214-0548aaf6f708 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff98000 (usable) [ 0.000000] BIOS-e820: 00000000bff98000 - 00000000bffa0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bffa0000 - 00000000bffae000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bffae000 - 00000000bfff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbff98 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bff98000 (usable) [ 0.000000] modified: 00000000bff98000 - 00000000bffa0000 (ACPI NVS) [ 0.000000] modified: 00000000bffa0000 - 00000000bffae000 (ACPI data) [ 0.000000] modified: 00000000bffae000 - 00000000bfff0000 (ACPI NVS) [ 0.000000] modified: 00000000bfff0000 - 00000000c0000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bff98000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bff98000 page 4k [ 0.000000] kernel direct mapping tables up to bff98000 @ 10000-15000 [ 0.000000] RAMDISK: 377fd000 - 37fefd9b [ 0.000000] ACPI: RSDP 00000000000f8db0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000bffa0000 00048 (v01 _ASUS_ Notebook 20071213 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bffa0200 00084 (v02 121307 FACP1504 20071213 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bffa0640 096EE (v01 F3K00 F3K00001 00000001 INTL 20051117) [ 0.000000] ACPI: FACS 00000000bffae000 00040 [ 0.000000] ACPI: APIC 00000000bffa0390 0005C (v01 121307 APIC1504 20071213 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bffa03f0 0003C (v01 121307 OEMMCFG 20071213 MSFT 00000097) [ 0.000000] ACPI: SLIC 00000000bffa0430 00176 (v01 _ASUS_ Notebook 20071213 MSFT 00000097) [ 0.000000] ACPI: ECDT 00000000bffa05e0 00054 (v01 121307 OEMECDT 20071213 MSFT 00000097) [ 0.000000] ACPI: BOOT 00000000bffa05b0 00028 (v01 121307 BOOT1504 20071213 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bffae040 0007D (v01 121307 OEMB1504 20071213 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bffa9d30 00038 (v01 121307 OEMHPET 20071213 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bffa9d70 0022C (v01 AMI POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000bff98000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000000bff98000 [ 0.000000] NODE_DATA [0000000000013000 - 0000000000017fff] [ 0.000000] bootmap [0000000000018000 - 000000000002fff7] pages 18 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00bff98000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64] [ 0.000000] #3 [00377fd000 - 0037fefd9b] RAMDISK ==> [00377fd000 - 0037fefd9b] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a2a000 - 0001a2a16d] BRK ==> [0001a2a000 - 0001a2a16d] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880002000000-ffff8800049fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bff98 [ 0.000000] On node 0 totalpages: 786215 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 102 pages reserved [ 0.000000] DMA zone: 3825 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10695 pages used for memmap [ 0.000000] DMA32 zone: 771537 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:40000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u1048576 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 775362 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=60fc39c5-75f4-44ce-b214-0548aaf6f708 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ e000000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 3082844k/3145312k available (5409k kernel code, 452k absent, 62016k reserved, 2976k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 31457280 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1895.280 MHz processor. [ 0.020006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3790.56 BogoMIPS (lpj=18952800) [ 0.020041] Security Framework initialized [ 0.020064] AppArmor: AppArmor initialized [ 0.020485] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.023918] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.025549] Mount-cache hash table entries: 256 [ 0.025737] Initializing cgroup subsys ns [ 0.025742] Initializing cgroup subsys cpuacct [ 0.025747] Initializing cgroup subsys memory [ 0.025758] Initializing cgroup subsys devices [ 0.025761] Initializing cgroup subsys freezer [ 0.025763] Initializing cgroup subsys net_cls [ 0.025788] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.025791] CPU: L2 Cache: 512K (64 bytes/line) [ 0.025794] CPU 0/0x0 -> Node 0 [ 0.025796] tseg: 0000000000 [ 0.025813] CPU: Physical Processor ID: 0 [ 0.025815] CPU: Processor Core ID: 0 [ 0.025818] mce: CPU supports 5 MCE banks [ 0.025831] using C1E aware idle routine [ 0.025834] Performance Events: AMD PMU driver. [ 0.025839] ... version: 0 [ 0.025841] ... bit width: 48 [ 0.025842] ... generic registers: 4 [ 0.025844] ... value mask: 0000ffffffffffff [ 0.025846] ... max period: 00007fffffffffff [ 0.025848] ... fixed-purpose events: 0 [ 0.025850] ... event mask: 000000000000000f [ 0.027766] ACPI: Core revision 20090903 [ 0.049534] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.049541] ftrace: allocating 22518 entries in 89 pages [ 0.057527] Setting APIC routing to flat [ 0.057851] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.158325] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 02 [ 0.160000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.030000] Initializing CPU#1 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 1/0x1 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 1 [ 0.030000] System has AMD C1E enabled [ 0.030000] Switch to broadcast mode on CPU1 [ 0.310119] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 02 [ 0.310139] Brought up 2 CPUs [ 0.310142] Total of 2 processors activated (7581.07 BogoMIPS). [ 0.310327] CPU0 attaching sched-domain: [ 0.310330] domain 0: span 0-1 level MC [ 0.310333] groups: 0 1 [ 0.310339] CPU1 attaching sched-domain: [ 0.310342] domain 0: span 0-1 level MC [ 0.310344] groups: 1 0 [ 0.310445] Switch to broadcast mode on CPU0 [ 0.310445] devtmpfs: initialized [ 0.310445] regulator: core version 0.5 [ 0.310445] Time: 20:52:40 Date: 05/07/10 [ 0.310445] NET: Registered protocol family 16 [ 0.310445] Trying to unpack rootfs image as initramfs... [ 0.310445] node 0 link 0: io port [1000, ffffff] [ 0.310445] TOM: 00000000c0000000 aka 3072M [ 0.310445] node 0 link 0: mmio [e0000000, efffffff] [ 0.310445] node 0 link 0: mmio [c0000000, dfffffff] [ 0.310445] node 0 link 0: mmio [a0000, bffff] [ 0.310445] node 0 link 0: mmio [f0000000, ffffffff] [ 0.310445] bus: [00,ff] on node 0 link 0 [ 0.310445] bus: 00 index 0 io port: [0, ffff] [ 0.310445] bus: 00 index 1 mmio: [c0000000, fcffffffff] [ 0.310445] bus: 00 index 2 mmio: [a0000, bffff] [ 0.310445] ACPI: bus type pci registered [ 0.310445] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.310445] PCI: Not using MMCONFIG. [ 0.310445] PCI: Using configuration type 1 for base access [ 0.330416] bio: create slab at 0 [ 0.341067] ACPI: EC: EC description table is found, configuring boot EC [ 0.342636] ACPI: Executed 3 blocks of module-level executable AML code [ 0.353195] ACPI: Interpreter enabled [ 0.353201] ACPI: (supports S0 S3 S4 S5) [ 0.353232] ACPI: Using IOAPIC for interrupt routing [ 0.353565] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.362307] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.367360] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.377952] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.378293] ACPI: No dock devices found. [ 0.378518] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.378616] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.378620] pci 0000:00:02.0: PME# disabled [ 0.378659] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.378662] pci 0000:00:04.0: PME# disabled [ 0.378701] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.378704] pci 0000:00:05.0: PME# disabled [ 0.378740] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.378743] pci 0000:00:06.0: PME# disabled [ 0.378780] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.378783] pci 0000:00:07.0: PME# disabled [ 0.378840] pci 0000:00:12.0: reg 10 io port: [0xb000-0xb007] [ 0.378848] pci 0000:00:12.0: reg 14 io port: [0xa000-0xa003] [ 0.378856] pci 0000:00:12.0: reg 18 io port: [0x9000-0x9007] [ 0.378864] pci 0000:00:12.0: reg 1c io port: [0x8000-0x8003] [ 0.378872] pci 0000:00:12.0: reg 20 io port: [0x7000-0x700f] [ 0.378879] pci 0000:00:12.0: reg 24 32bit mmio: [0xfdeff800-0xfdeffbff] [ 0.378899] pci 0000:00:12.0: set SATA to AHCI mode [ 0.378944] pci 0000:00:13.0: reg 10 32bit mmio: [0xfdefe000-0xfdefefff] [ 0.379005] pci 0000:00:13.1: reg 10 32bit mmio: [0xfdefd000-0xfdefdfff] [ 0.379067] pci 0000:00:13.2: reg 10 32bit mmio: [0xfdefc000-0xfdefcfff] [ 0.379129] pci 0000:00:13.3: reg 10 32bit mmio: [0xfdefb000-0xfdefbfff] [ 0.379190] pci 0000:00:13.4: reg 10 32bit mmio: [0xfdefa000-0xfdefafff] [ 0.379271] pci 0000:00:13.5: reg 10 32bit mmio: [0xfdeff000-0xfdeff0ff] [ 0.379326] pci 0000:00:13.5: supports D1 D2 [ 0.379329] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.379333] pci 0000:00:13.5: PME# disabled [ 0.379383] pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f] [ 0.379460] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.379468] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.379475] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.379482] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.379490] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f] [ 0.379550] pci 0000:00:14.2: reg 10 64bit mmio: [0xfdef4000-0xfdef7fff] [ 0.379596] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.379600] pci 0000:00:14.2: PME# disabled [ 0.379828] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xc0000000-0xdfffffff] [ 0.379834] pci 0000:01:00.0: reg 14 io port: [0xc000-0xc0ff] [ 0.379840] pci 0000:01:00.0: reg 18 32bit mmio: [0xfdff0000-0xfdffffff] [ 0.379856] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfdfc0000-0xfdfdffff] [ 0.379876] pci 0000:01:00.0: supports D1 D2 [ 0.379932] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff] [ 0.379935] pci 0000:00:02.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] [ 0.379940] pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xdfffffff] [ 0.380013] pci 0000:00:04.0: bridge io port: [0xd000-0xdfff] [ 0.380016] pci 0000:00:04.0: bridge 32bit mmio: [0xfe000000-0xfe8fffff] [ 0.380021] pci 0000:00:04.0: bridge 64bit mmio pref: [0xfa000000-0xfcffffff] [ 0.380122] pci 0000:06:00.0: reg 10 io port: [0xe800-0xe8ff] [ 0.380140] pci 0000:06:00.0: reg 18 64bit mmio: [0xfe9ff000-0xfe9fffff] [ 0.380159] pci 0000:06:00.0: reg 30 32bit mmio pref: [0xfe9e0000-0xfe9effff] [ 0.380198] pci 0000:06:00.0: supports D1 D2 [ 0.380200] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.380205] pci 0000:06:00.0: PME# disabled [ 0.380268] pci 0000:00:06.0: bridge io port: [0xe000-0xefff] [ 0.380271] pci 0000:00:06.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff] [ 0.380318] pci 0000:07:00.0: reg 10 64bit mmio: [0xfeaf0000-0xfeafffff] [ 0.380432] pci 0000:00:07.0: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.380484] pci 0000:08:01.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff] [ 0.380548] pci 0000:08:01.0: PME# supported from D0 D3hot D3cold [ 0.380553] pci 0000:08:01.0: PME# disabled [ 0.380601] pci 0000:08:01.1: reg 10 32bit mmio: [0xfebff400-0xfebff4ff] [ 0.380665] pci 0000:08:01.1: supports D1 D2 [ 0.380667] pci 0000:08:01.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.380673] pci 0000:08:01.1: PME# disabled [ 0.380721] pci 0000:08:01.2: reg 10 32bit mmio: [0xfebff000-0xfebff0ff] [ 0.380784] pci 0000:08:01.2: supports D1 D2 [ 0.380787] pci 0000:08:01.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.380792] pci 0000:08:01.2: PME# disabled [ 0.380843] pci 0000:08:01.3: reg 10 32bit mmio: [0xfebfec00-0xfebfecff] [ 0.380907] pci 0000:08:01.3: supports D1 D2 [ 0.380909] pci 0000:08:01.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.380915] pci 0000:08:01.3: PME# disabled [ 0.380962] pci 0000:08:01.4: reg 10 32bit mmio: [0xfebfe800-0xfebfe8ff] [ 0.381026] pci 0000:08:01.4: supports D1 D2 [ 0.381028] pci 0000:08:01.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.381033] pci 0000:08:01.4: PME# disabled [ 0.381099] pci 0000:00:14.4: transparent bridge [ 0.381106] pci 0000:00:14.4: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.381133] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.381477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.392122] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15) [ 0.392282] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15) [ 0.392437] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15) [ 0.392598] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15) [ 0.392754] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 7 10 11 12 14 15) [ 0.392909] ACPI: PCI Interrupt Link [LNKF] (IRQs *9) [ 0.393062] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15) [ 0.393219] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.393398] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.393405] vgaarb: loaded [ 0.393559] SCSI subsystem initialized [ 0.400000] libata version 3.00 loaded. [ 0.400000] usbcore: registered new interface driver usbfs [ 0.400000] usbcore: registered new interface driver hub [ 0.400000] usbcore: registered new device driver usb [ 0.400000] ACPI: WMI: Mapper loaded [ 0.400000] PCI: Using ACPI for IRQ routing [ 0.400000] NetLabel: Initializing [ 0.400000] NetLabel: domain hash size = 128 [ 0.400000] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.400000] NetLabel: unlabeled traffic allowed by default [ 0.400000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.400000] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.400000] Switching to clocksource hpet [ 0.406408] AppArmor: AppArmor Filesystem Enabled [ 0.406408] pnp: PnP ACPI init [ 0.406408] ACPI: bus type pnp registered [ 0.406408] pnp: PnP ACPI: found 13 devices [ 0.406408] ACPI: ACPI bus type pnp unregistered [ 0.406408] system 00:06: ioport range 0x250-0x253 has been reserved [ 0.406408] system 00:06: ioport range 0x256-0x25f has been reserved [ 0.406408] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.406408] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.406408] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.406408] system 00:08: ioport range 0x40b-0x40b has been reserved [ 0.406408] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.406408] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 0.406408] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 0.406408] system 00:08: ioport range 0xc50-0xc51 has been reserved [ 0.406408] system 00:08: ioport range 0xc52-0xc52 has been reserved [ 0.406408] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 0.406408] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 0.406408] system 00:08: ioport range 0xcd0-0xcd1 has been reserved [ 0.406408] system 00:08: ioport range 0xcd2-0xcd3 has been reserved [ 0.406408] system 00:08: ioport range 0xcd4-0xcd5 has been reserved [ 0.406408] system 00:08: ioport range 0xcd6-0xcd7 has been reserved [ 0.406408] system 00:08: ioport range 0xcd8-0xcdf has been reserved [ 0.406408] system 00:08: ioport range 0x800-0x89f has been reserved [ 0.406408] system 00:08: ioport range 0xb10-0xb1f has been reserved [ 0.406408] system 00:08: ioport range 0x900-0x90f has been reserved [ 0.406408] system 00:08: ioport range 0x910-0x91f has been reserved [ 0.406408] system 00:08: ioport range 0xfe00-0xfefe has been reserved [ 0.406408] system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.406408] system 00:08: iomem range 0xfff00000-0xffffffff has been reserved [ 0.406408] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.406408] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.406408] system 00:0c: iomem range 0xc0000-0xcffff has been reserved [ 0.406408] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.406408] system 00:0c: iomem range 0x100000-0xbfffffff could not be reserved [ 0.406408] system 00:0c: iomem range 0xe0000000-0xffffffff could not be reserved [ 0.410541] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.410544] pci 0000:00:02.0: IO window: 0xc000-0xcfff [ 0.410548] pci 0000:00:02.0: MEM window: 0xfdf00000-0xfdffffff [ 0.410552] pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff [ 0.410557] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.410561] pci 0000:00:04.0: IO window: 0xd000-0xdfff [ 0.410564] pci 0000:00:04.0: MEM window: 0xfe000000-0xfe8fffff [ 0.410568] pci 0000:00:04.0: PREFETCH window: 0x000000fa000000-0x000000fcffffff [ 0.410572] pci 0000:00:05.0: PCI bridge, secondary bus 0000:05 [ 0.410574] pci 0000:00:05.0: IO window: disabled [ 0.410578] pci 0000:00:05.0: MEM window: disabled [ 0.410580] pci 0000:00:05.0: PREFETCH window: disabled [ 0.410585] pci 0000:00:06.0: PCI bridge, secondary bus 0000:06 [ 0.410588] pci 0000:00:06.0: IO window: 0xe000-0xefff [ 0.410591] pci 0000:00:06.0: MEM window: 0xfe900000-0xfe9fffff [ 0.410594] pci 0000:00:06.0: PREFETCH window: disabled [ 0.410598] pci 0000:00:07.0: PCI bridge, secondary bus 0000:07 [ 0.410600] pci 0000:00:07.0: IO window: disabled [ 0.410604] pci 0000:00:07.0: MEM window: 0xfea00000-0xfeafffff [ 0.410607] pci 0000:00:07.0: PREFETCH window: disabled [ 0.410612] pci 0000:00:14.4: PCI bridge, secondary bus 0000:08 [ 0.410614] pci 0000:00:14.4: IO window: disabled [ 0.410620] pci 0000:00:14.4: MEM window: 0xfeb00000-0xfebfffff [ 0.410624] pci 0000:00:14.4: PREFETCH window: disabled [ 0.410639] pci 0000:00:02.0: setting latency timer to 64 [ 0.410645] pci 0000:00:04.0: setting latency timer to 64 [ 0.410651] pci 0000:00:05.0: setting latency timer to 64 [ 0.410657] pci 0000:00:06.0: setting latency timer to 64 [ 0.410663] pci 0000:00:07.0: setting latency timer to 64 [ 0.410673] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.410675] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.410679] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.410681] pci_bus 0000:01: resource 1 mem: [0xfdf00000-0xfdffffff] [ 0.410684] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xdfffffff] [ 0.410687] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.410690] pci_bus 0000:02: resource 1 mem: [0xfe000000-0xfe8fffff] [ 0.410692] pci_bus 0000:02: resource 2 pref mem [0xfa000000-0xfcffffff] [ 0.410696] pci_bus 0000:06: resource 0 io: [0xe000-0xefff] [ 0.410698] pci_bus 0000:06: resource 1 mem: [0xfe900000-0xfe9fffff] [ 0.410701] pci_bus 0000:07: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.410704] pci_bus 0000:08: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.410707] pci_bus 0000:08: resource 3 io: [0x00-0xffff] [ 0.410710] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.410754] NET: Registered protocol family 2 [ 0.410981] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.413233] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.420322] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.421224] TCP: Hash tables configured (established 524288 bind 65536) [ 0.421228] TCP reno registered [ 0.421367] NET: Registered protocol family 1 [ 0.572567] pci 0000:01:00.0: Boot video device [ 0.572848] Simple Boot Flag at 0x52 set to 0x1 [ 0.573094] Scanning for low memory corruption every 60 seconds [ 0.573256] audit: initializing netlink socket (disabled) [ 0.573272] type=2000 audit(1273265559.572:1): initialized [ 0.583414] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.585082] VFS: Disk quotas dquot_6.5.2 [ 0.585151] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.585951] fuse init (API version 7.13) [ 0.586053] msgmni has been set to 6021 [ 0.586354] alg: No test for stdrng (krng) [ 0.586437] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.586440] io scheduler noop registered [ 0.586442] io scheduler anticipatory registered [ 0.586444] io scheduler deadline registered [ 0.586488] io scheduler cfq registered (default) [ 0.590072] alloc irq_desc for 24 on node 0 [ 0.590076] alloc kstat_irqs on node 0 [ 0.590087] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X [ 0.590093] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.590255] alloc irq_desc for 25 on node 0 [ 0.590257] alloc kstat_irqs on node 0 [ 0.590263] pcieport 0000:00:04.0: irq 25 for MSI/MSI-X [ 0.590268] pcieport 0000:00:04.0: setting latency timer to 64 [ 0.600160] alloc irq_desc for 26 on node 0 [ 0.600164] alloc kstat_irqs on node 0 [ 0.600174] pcieport 0000:00:05.0: irq 26 for MSI/MSI-X [ 0.600181] pcieport 0000:00:05.0: setting latency timer to 64 [ 0.600334] alloc irq_desc for 27 on node 0 [ 0.600336] alloc kstat_irqs on node 0 [ 0.600341] pcieport 0000:00:06.0: irq 27 for MSI/MSI-X [ 0.600346] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.607215] Freeing initrd memory: 8139k freed [ 0.613629] alloc irq_desc for 28 on node 0 [ 0.613632] alloc kstat_irqs on node 0 [ 0.613644] pcieport 0000:00:07.0: irq 28 for MSI/MSI-X [ 0.613650] pcieport 0000:00:07.0: setting latency timer to 64 [ 0.613776] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.613876] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.614096] ACPI: AC Adapter [AC0] (on-line) [ 0.614193] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.614197] ACPI: Power Button [PWRB] [ 0.614253] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.614261] ACPI: Sleep Button [SLPB] [ 0.614314] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 0.615728] ACPI: Lid Switch [LID] [ 0.615803] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.615808] ACPI: Power Button [PWRF] [ 0.616415] ACPI: processor limited to max C-state 1 [ 0.616449] processor LNXCPU:00: registered as cooling_device0 [ 0.616498] processor LNXCPU:01: registered as cooling_device1 [ 0.622693] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.622702] ACPI: Thermal Zone [THRM] (30 C) [ 0.624523] Linux agpgart interface v0.103 [ 0.624587] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.626001] brd: module loaded [ 0.626547] loop: module loaded [ 0.626664] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.626934] alloc irq_desc for 16 on node 0 [ 0.626937] alloc kstat_irqs on node 0 [ 0.626945] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.626994] pata_acpi 0000:00:14.1: setting latency timer to 64 [ 0.627423] Fixed MDIO Bus: probed [ 0.627464] PPP generic driver version 2.4.2 [ 0.627511] tun: Universal TUN/TAP device driver, 1.6 [ 0.627513] tun: (C) 1999-2004 Max Krasnyansky [ 0.627609] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.627714] alloc irq_desc for 19 on node 0 [ 0.627716] alloc kstat_irqs on node 0 [ 0.627721] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.627747] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 0.627798] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 0.627835] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 0.627850] ehci_hcd 0000:00:13.5: debug port 1 [ 0.627879] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfdeff000 [ 0.650038] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 0.650179] usb usb1: configuration #1 chosen from 1 choice [ 0.650213] hub 1-0:1.0: USB hub found [ 0.650222] hub 1-0:1.0: 10 ports detected [ 0.650330] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.650393] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.650410] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.650454] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 0.650485] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfdefe000 [ 0.652379] ACPI: Battery Slot [BAT0] (battery present) [ 0.704156] usb usb2: configuration #1 chosen from 1 choice [ 0.704188] hub 2-0:1.0: USB hub found [ 0.704199] hub 2-0:1.0: 2 ports detected [ 0.704310] alloc irq_desc for 17 on node 0 [ 0.704312] alloc kstat_irqs on node 0 [ 0.704318] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.704334] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 0.704378] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 0.704404] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfdefd000 [ 0.764144] usb usb3: configuration #1 chosen from 1 choice [ 0.764174] hub 3-0:1.0: USB hub found [ 0.764186] hub 3-0:1.0: 2 ports detected [ 0.764288] alloc irq_desc for 18 on node 0 [ 0.764290] alloc kstat_irqs on node 0 [ 0.764294] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.764308] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 0.764348] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 0.764370] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfdefc000 [ 0.824163] usb usb4: configuration #1 chosen from 1 choice [ 0.824192] hub 4-0:1.0: USB hub found [ 0.824203] hub 4-0:1.0: 2 ports detected [ 0.824299] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.824315] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 0.824369] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 0.824386] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfdefb000 [ 0.884139] usb usb5: configuration #1 chosen from 1 choice [ 0.884173] hub 5-0:1.0: USB hub found [ 0.884184] hub 5-0:1.0: 2 ports detected [ 0.884281] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.884293] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 0.884337] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 0.884353] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfdefa000 [ 0.944142] usb usb6: configuration #1 chosen from 1 choice [ 0.944172] hub 6-0:1.0: USB hub found [ 0.944183] hub 6-0:1.0: 2 ports detected [ 0.944255] uhci_hcd: USB Universal Host Controller Interface driver [ 0.944361] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.946223] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.948215] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.948222] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.948225] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.948229] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.948233] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.948347] mice: PS/2 mouse device common for all mice [ 0.948535] rtc_cmos 00:02: RTC can wake from S4 [ 0.948590] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.948620] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.948794] device-mapper: uevent: version 1.0.3 [ 0.948930] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.949047] device-mapper: multipath: version 1.1.0 loaded [ 0.949050] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.949296] cpuidle: using governor ladder [ 0.949299] cpuidle: using governor menu [ 0.949725] TCP cubic registered [ 0.949882] NET: Registered protocol family 10 [ 0.950451] lo: Disabled Privacy Extensions [ 0.950813] NET: Registered protocol family 17 [ 0.950860] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-58 processors (2 cpu cores) (version 2.20.00) [ 0.950934] powernow-k8: 0 : fid 0xb (1900 MHz), vid 0x11 [ 0.950936] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x12 [ 0.950938] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x13 [ 0.950941] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e [ 0.951100] PM: Resume from disk failed. [ 0.951115] registered taskstats version 1 [ 0.951596] Magic number: 10:978:901 [ 0.951707] rtc_cmos 00:02: setting system clock to 2010-05-07 20:52:41 UTC (1273265561) [ 0.951711] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.951713] EDD information not available. [ 0.951789] Freeing unused kernel memory: 876k freed [ 0.952358] Write protecting the kernel read-only data: 7680k [ 0.962554] usb 1-6: new high speed USB device using ehci_hcd and address 2 [ 0.977500] udev: starting version 151 [ 0.981855] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.074973] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.075004] r8169 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.075055] r8169 0000:06:00.0: setting latency timer to 64 [ 1.075106] alloc irq_desc for 29 on node 0 [ 1.075108] alloc kstat_irqs on node 0 [ 1.075123] r8169 0000:06:00.0: irq 29 for MSI/MSI-X [ 1.075784] eth0: RTL8168b/8111b at 0xffffc9000067a000, 00:1f:c6:8d:fe:c5, XID 18000000 IRQ 29 [ 1.104169] scsi0 : pata_atiixp [ 1.122710] usb 1-6: configuration #1 chosen from 1 choice [ 1.127337] scsi1 : pata_atiixp [ 1.129106] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.129110] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.167189] ahci 0000:00:12.0: version 3.0 [ 1.167214] alloc irq_desc for 22 on node 0 [ 1.167217] alloc kstat_irqs on node 0 [ 1.167226] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.167268] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 1.167372] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.167377] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.167898] scsi2 : ahci [ 1.168162] scsi3 : ahci [ 1.168307] scsi4 : ahci [ 1.168425] scsi5 : ahci [ 1.168599] ata3: SATA max UDMA/133 abar m1024@0xfdeff800 port 0xfdeff900 irq 22 [ 1.168603] ata4: SATA max UDMA/133 abar m1024@0xfdeff800 port 0xfdeff980 irq 22 [ 1.168607] ata5: SATA max UDMA/133 abar m1024@0xfdeff800 port 0xfdeffa00 irq 22 [ 1.168611] ata6: SATA max UDMA/133 abar m1024@0xfdeff800 port 0xfdeffa80 irq 22 [ 1.300532] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WR02, max UDMA/33 [ 1.340484] ata1.00: configured for UDMA/33 [ 1.345948] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WR02 PQ: 0 ANSI: 5 [ 1.357088] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.357092] Uniform CD-ROM driver Revision: 3.20 [ 1.357228] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.357314] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.510079] ata5: SATA link down (SStatus 0 SControl 300) [ 1.510111] ata4: SATA link down (SStatus 0 SControl 300) [ 1.510162] ata6: SATA link down (SStatus 0 SControl 300) [ 1.570053] usb 6-1: new full speed USB device using ohci_hcd and address 2 [ 1.690054] ata3: softreset failed (device not ready) [ 1.690057] ata3: applying SB600 PMP SRST workaround and retrying [ 1.839199] usb 6-1: configuration #1 chosen from 1 choice [ 1.870087] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.871015] ata3.00: ATA-7: ST9120822AS, 3.ALC, max UDMA/133 [ 1.871019] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.871040] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.872148] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.872151] ata3.00: configured for UDMA/133 [ 1.890170] scsi 2:0:0:0: Direct-Access ATA ST9120822AS 3.AL PQ: 0 ANSI: 5 [ 1.890387] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.890480] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 1.890545] sd 2:0:0:0: [sda] Write Protect is off [ 1.890549] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.890578] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.890780] sda: sda1 sda2 sda3 < sda5 > sda4 [ 1.922644] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.926953] alloc irq_desc for 20 on node 0 [ 1.926958] alloc kstat_irqs on node 0 [ 1.926968] ohci1394 0000:08:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.982116] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 2.342912] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 3.300397] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c00000604a8] [ 14.945498] Adding 3494096k swap on /dev/sda5. Priority:-1 extents:1 across:3494096k [ 14.960965] udev: starting version 151 [ 14.977638] lp: driver loaded but no devices found [ 15.027198] EDAC MC: Ver: 2.1.0 Apr 28 2010 [ 15.040812] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 15.170075] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 15.203219] sdhci: Secure Digital Host Controller Interface driver [ 15.203223] sdhci: Copyright(c) Pierre Ossman [ 15.209500] ricoh-mmc: Ricoh MMC Controller disabling driver [ 15.209504] ricoh-mmc: Copyright(c) Philip Langdale [ 15.209809] vga16fb: initializing [ 15.209813] vga16fb: mapped to 0xffff8800000a0000 [ 15.209893] fb0: VGA16 VGA frame buffer device [ 15.212939] cfg80211: Calling CRDA to update world regulatory domain [ 15.227611] sdhci-pci 0000:08:01.1: SDHCI controller found [1180:0822] (rev 22) [ 15.227638] alloc irq_desc for 21 on node 0 [ 15.227641] alloc kstat_irqs on node 0 [ 15.227651] sdhci-pci 0000:08:01.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 15.228713] sdhci-pci 0000:08:01.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 15.229807] Registered led device: mmc0:: [ 15.230900] mmc0: SDHCI controller on PCI [0000:08:01.1] using DMA [ 15.234500] asus_laptop: Asus Laptop Support version 0.42 [ 15.238930] asus_laptop: F3Ka model detected [ 15.296320] ricoh-mmc: Ricoh MMC controller found at 0000:08:01.2 [1180:0843] (rev 12) [ 15.296346] ricoh-mmc: Controller is now disabled. [ 15.298098] acpi device:26: registered as cooling_device2 [ 15.298378] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:22/LNXVIDEO:01/input/input6 [ 15.298475] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 15.331642] input: Asus Laptop extra buttons as /devices/virtual/input/input7 [ 15.348256] asus_laptop: Brightness ignored, must be controlled by ACPI video driver [ 15.357123] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 15.357127] Disabling lock debugging due to kernel taint [ 15.389893] cfg80211: World regulatory domain updated: [ 15.389897] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.389901] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.389904] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.389907] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.389909] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.389912] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.440663] [fglrx] Maximum main memory to use for locked dma buffers: 2873 MBytes. [ 15.440965] [fglrx] vendor: 1002 device: 9581 count: 1 [ 15.441884] [fglrx] ioport: bar 1, base 0xc000, size: 0x100 [ 15.441905] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 15.441911] pci 0000:01:00.0: setting latency timer to 64 [ 15.442109] [fglrx] Kernel PAT support is enabled [ 15.442144] [fglrx] module loaded - fglrx 8.72.11 [Apr 8 2010] with 1 minors [ 15.445295] Linux video capture interface: v2.00 [ 15.448057] EDAC amd64_edac: Ver: 3.2.0 Apr 28 2010 [ 15.456433] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 15.456446] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 15.456448] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 15.456450] (Note that use of the override may cause unknown side effects.) [ 15.456473] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 15.457775] type=1505 audit(1273283575.998:2): operation="profile_load" pid=679 name="/sbin/dhclient3" [ 15.458076] type=1505 audit(1273283575.998:3): operation="profile_load" pid=679 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 15.458247] type=1505 audit(1273283575.998:4): operation="profile_load" pid=679 name="/usr/lib/connman/scripts/dhclient-script" [ 15.464791] Initializing USB Mass Storage driver... [ 15.465095] usbcore: registered new interface driver usb-storage [ 15.465294] USB Mass Storage support registered. [ 15.474217] Bluetooth: Core ver 2.15 [ 15.475505] NET: Registered protocol family 31 [ 15.475509] Bluetooth: HCI device and connection manager initialized [ 15.475513] Bluetooth: HCI socket layer initialized [ 15.477765] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 15.477927] usbcore: registered new interface driver btusb [ 15.577484] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (174f:5a31) [ 15.604486] ath5k 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 15.604496] ath5k 0000:07:00.0: setting latency timer to 64 [ 15.604553] ath5k 0000:07:00.0: registered as 'phy0' [ 15.633937] Console: switching to colour frame buffer device 80x30 [ 15.641006] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:13.5/usb1/1-6/1-6:1.0/input/input8 [ 15.641079] usbcore: registered new interface driver uvcvideo [ 15.641083] USB Video Class driver (v0.1.0) [ 15.713871] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input9 [ 15.736257] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input10 [ 16.063232] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.123839] ath: EEPROM regdomain: 0x60 [ 16.123843] ath: EEPROM indicates we should expect a direct regpair map [ 16.123849] ath: Country alpha2 being used: 00 [ 16.123851] ath: Regpair used: 0x60 [ 16.158600] phy0: Selected rate control algorithm 'minstrel' [ 16.159414] Registered led device: ath5k-phy0::rx [ 16.159440] Registered led device: ath5k-phy0::tx [ 16.159445] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 16.214040] hda_codec: ALC660-VD: BIOS auto-probing. [ 16.215005] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input11 [ 16.315410] EXT4-fs (sda4): mounted filesystem with ordered data mode [ 17.247534] type=1505 audit(1273283577.788:5): operation="profile_replace" pid=908 name="/sbin/dhclient3" [ 17.247851] type=1505 audit(1273283577.788:6): operation="profile_replace" pid=908 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 17.248029] type=1505 audit(1273283577.788:7): operation="profile_replace" pid=908 name="/usr/lib/connman/scripts/dhclient-script" [ 17.253185] type=1505 audit(1273283577.798:8): operation="profile_load" pid=910 name="/usr/lib/cups/backend/cups-pdf" [ 17.253575] type=1505 audit(1273283577.798:9): operation="profile_load" pid=910 name="/usr/sbin/cupsd" [ 17.256029] type=1505 audit(1273283577.798:10): operation="profile_load" pid=911 name="/usr/sbin/mysqld-akonadi" [ 17.259609] r8169: eth0: link down [ 17.260466] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.261973] type=1505 audit(1273283577.808:11): operation="profile_load" pid=912 name="/usr/sbin/tcpdump" [ 17.366597] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.479970] Bluetooth: L2CAP ver 2.14 [ 17.479975] Bluetooth: L2CAP socket layer initialized [ 17.515404] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.515409] Bluetooth: BNEP filters: protocol multicast [ 17.526250] alloc irq_desc for 30 on node 0 [ 17.526254] alloc kstat_irqs on node 0 [ 17.526268] fglrx_pci 0000:01:00.0: irq 30 for MSI/MSI-X [ 17.528698] [fglrx] Firegl kernel thread PID: 999 [ 17.529027] [fglrx] IRQ 30 Enabled [ 17.537368] Bridge firewalling registered [ 17.572157] Bluetooth: SCO (Voice Link) ver 0.6 [ 17.572162] Bluetooth: SCO socket layer initialized [ 17.591727] ppdev: user-space parallel port driver [ 17.852541] Bluetooth: RFCOMM TTY layer initialized [ 17.852547] Bluetooth: RFCOMM socket layer initialized [ 17.852550] Bluetooth: RFCOMM ver 1.11 [ 18.122597] [fglrx] Gart USWC size:942 M. [ 18.122602] [fglrx] Gart cacheable size:373 M. [ 18.122608] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 18.122612] [fglrx] Reserved FB block: Unshared offset:1fd06000, size:2f5000 [ 18.122615] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [ 28.486771] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold [ 32.520030] Clocksource tsc unstable (delta = -135876302 ns) [ 53.110885] wlan0: deauthenticating from 00:40:10:20:00:03 by local choice (reason=3) [ 53.111173] wlan0: direct probe to AP 00:40:10:20:00:03 (try 1) [ 53.113967] wlan0: direct probe responded [ 53.113977] wlan0: authenticate with AP 00:40:10:20:00:03 (try 1) [ 53.115549] wlan0: authenticated [ 53.115598] wlan0: associate with AP 00:40:10:20:00:03 (try 1) [ 53.117965] wlan0: RX AssocResp from 00:40:10:20:00:03 (capab=0x431 status=0 aid=2) [ 53.117975] wlan0: associated [ 53.120024] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 53.183182] Intel AES-NI instructions are not detected. [ 53.257556] padlock: VIA PadLock not detected. [ 54.580344] mmc0: new high speed SD card at address 0002 [ 54.609212] mmcblk0: mmc0:0002 00000 1.90 GiB [ 54.609405] mmcblk0: p1 [ 63.812556] wlan0: no IPv6 routers present [ 3977.870161] mmc0: card 0002 removed [ 4079.210073] usb 2-1: new full speed USB device using ohci_hcd and address 2 [ 4079.407384] usb 2-1: configuration #1 chosen from 1 choice [ 4287.255973] usb 2-1: USB disconnect, address 2 [ 4288.860060] usb 2-1: new full speed USB device using ohci_hcd and address 3 [ 4289.052642] usb 2-1: configuration #1 chosen from 1 choice [ 4289.077930] scsi6 : SCSI emulation for USB Mass Storage devices [ 4289.086590] usb-storage: device found at 3 [ 4289.086598] usb-storage: waiting for device to settle before scanning [ 4294.081370] usb-storage: device scan complete [ 4294.087290] scsi 6:0:0:0: Direct-Access Qualcomm MMC Storage 2.31 PQ: 0 ANSI: 2 [ 4294.089309] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 4294.250689] usb 2-1: reset full speed USB device using ohci_hcd and address 3 [ 4294.465263] sd 6:0:0:0: [sdb] 3987457 512-byte logical blocks: (2.04 GB/1.90 GiB) [ 4294.475575] sd 6:0:0:0: [sdb] Write Protect is off [ 4294.475588] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 4294.475596] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4294.503237] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4294.503252] sdb: sdb1 [ 4294.539241] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 4294.539255] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 4294.780069] usb 2-1: reset full speed USB device using ohci_hcd and address 3 [ 4295.130090] usb 2-1: reset full speed USB device using ohci_hcd and address 3