[ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] RAMDISK: 37856000 - 37fef5a3 [ 0.000000] Allocated new RAMDISK: 008de000 - 010775a3 [ 0.000000] Move RAMDISK from 0000000037856000 - 0000000037fef5a2 to 008de000 - 010775a2 [ 0.000000] ACPI: RSDP 000f5b00 00014 (v00 FUJ ) [ 0.000000] ACPI: RSDT 7f6f4783 00038 (v01 FUJ FJNB185 01100000 FUJ 00000100) [ 0.000000] ACPI: FACP 7f6faf8c 00074 (v01 FUJ FJNB185 01100000 FUJ 00000100) [ 0.000000] ACPI: DSDT 7f6f47bb 060FE (v01 FUJ FJNB185 01100000 MSFT 0100000E) [ 0.000000] ACPI: FACS 7f6fbfc0 00040 [ 0.000000] ACPI: SSDT 7f6fa8b9 00296 (v01 FUJ FJNB185 01100000 INTL 20030522) [ 0.000000] ACPI: SSDT 7f6facdb 0023F (v01 FUJ FJNB185 01100000 MSFT 0100000E) [ 0.000000] ACPI: SSDT 7f6faf1a 0004A (v01 FUJ FJNB185 01100000 MSFT 0100000E) [ 0.000000] ACPI: BOOT 7f6faf64 00028 (v01 FUJ FJNB185 01100000 FUJ 00000100) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd0e6] BRK ==> [00008da000 - 00008dd0e6] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008de000 - 00010775a3] NEW RAMDISK ==> [00008de000 - 00010775a3] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1079200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36024 r0 d21320 u4194304 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517777 [ 0.000000] Kernel command line: root=UUID=17a7bd6a-0796-42f8-9247-49d785b428fa ro single [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10439040 bytes of page_cgroup [ 0.000000] Memory: 2043196k/2087872k available (4673k kernel code, 43272k reserved, 2122k data, 656k init, 1178568k highmem) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1700.184 MHz processor. [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3400.36 BogoMIPS (lpj=6800736) [ 0.008007] Security Framework initialized [ 0.008100] AppArmor: AppArmor initialized [ 0.008157] Mount-cache hash table entries: 512 [ 0.008389] Initializing cgroup subsys ns [ 0.008445] Initializing cgroup subsys cpuacct [ 0.008498] Initializing cgroup subsys memory [ 0.008557] Initializing cgroup subsys devices [ 0.008608] Initializing cgroup subsys freezer [ 0.008660] Initializing cgroup subsys net_cls [ 0.008740] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008819] CPU: L2 cache: 2048K [ 0.008871] mce: CPU supports 5 MCE banks [ 0.008941] Performance Events: [ 0.008978] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.009073] no hardware sampling interrupt available. [ 0.009124] p6 PMU driver. [ 0.009176] ... version: 0 [ 0.009224] ... bit width: 32 [ 0.009273] ... generic registers: 2 [ 0.009322] ... value mask: 00000000ffffffff [ 0.009374] ... max period: 000000007fffffff [ 0.009425] ... fixed-purpose events: 0 [ 0.009474] ... event mask: 0000000000000003 [ 0.009529] Checking 'hlt' instruction... OK. [ 0.024989] SMP alternatives: switching to UP code [ 0.033017] Freeing SMP alternatives: 19k freed [ 0.033076] ACPI: Core revision 20090903 [ 0.046418] ACPI: setting ELCR to 0200 (from 0800) [ 0.048032] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.048099] ftrace: allocating 21771 entries in 43 pages [ 0.052078] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.052135] weird, boot CPU (#0) not listed by the BIOS. [ 0.052186] SMP motherboard not detected. [ 0.052235] Local APIC not detected. Using dummy APIC emulation. [ 0.052288] SMP disabled [ 0.052458] Brought up 1 CPUs [ 0.052505] Total of 1 processors activated (3400.36 BogoMIPS). [ 0.056059] CPU0 attaching NULL sched-domain. [ 0.056218] devtmpfs: initialized [ 0.056681] regulator: core version 0.5 [ 0.056750] Time: 19:22:12 Date: 05/09/10 [ 0.056848] NET: Registered protocol family 16 [ 0.057032] EISA bus registered [ 0.057087] ACPI: bus type pci registered [ 0.057349] PCI: PCI BIOS revision 2.10 entry at 0xfd972, last bus=3 [ 0.057402] PCI: Using configuration type 1 for base access [ 0.058524] bio: create slab at 0 [ 0.059361] ACPI: EC: Look up EC in DSDT [ 0.067955] ACPI: Interpreter enabled [ 0.068012] ACPI: (supports S0 S3 S4 S5) [ 0.068194] ACPI: Using PIC for interrupt routing [ 0.076323] ACPI: ACPI Dock Station Driver: 2 docks/bays found [ 0.077111] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.078112] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff] [ 0.078118] pci 0000:00:02.0: reg 14 32bit mmio: [0xd0000000-0xd007ffff] [ 0.078124] pci 0000:00:02.0: reg 18 io port: [0x2450-0x2457] [ 0.078143] pci 0000:00:02.0: supports D1 [ 0.078162] pci 0000:00:02.1: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.078167] pci 0000:00:02.1: reg 14 32bit mmio: [0xd0080000-0xd00fffff] [ 0.078189] pci 0000:00:02.1: supports D1 [ 0.078256] pci 0000:00:1d.0: reg 20 io port: [0x20c0-0x20df] [ 0.078306] pci 0000:00:1d.1: reg 20 io port: [0x20e0-0x20ff] [ 0.078354] pci 0000:00:1d.2: reg 20 io port: [0x2400-0x241f] [ 0.078409] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0100000-0xd01003ff] [ 0.078461] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.078517] pci 0000:00:1d.7: PME# disabled [ 0.078644] pci 0000:00:1f.0: quirk: region fc00-fc7f claimed by ICH4 ACPI/GPIO/TCO [ 0.078713] pci 0000:00:1f.0: quirk: region fc80-fcbf claimed by ICH4 GPIO [ 0.078787] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.078794] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.078801] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.078808] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.078815] pci 0000:00:1f.1: reg 20 io port: [0x2440-0x244f] [ 0.078823] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.078869] pci 0000:00:1f.3: reg 20 io port: [0x2420-0x243f] [ 0.078909] pci 0000:00:1f.5: reg 10 io port: [0x1800-0x18ff] [ 0.078915] pci 0000:00:1f.5: reg 14 io port: [0x2080-0x20bf] [ 0.078922] pci 0000:00:1f.5: reg 18 32bit mmio: [0xd0100c00-0xd0100dff] [ 0.078929] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xd0100800-0xd01008ff] [ 0.078955] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.079010] pci 0000:00:1f.5: PME# disabled [ 0.079085] pci 0000:00:1f.6: reg 10 io port: [0x1c00-0x1cff] [ 0.079092] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f] [ 0.079125] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.079180] pci 0000:00:1f.6: PME# disabled [ 0.079274] pci 0000:01:0a.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.079291] pci 0000:01:0a.0: supports D1 D2 [ 0.079294] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.079349] pci 0000:01:0a.0: PME# disabled [ 0.079426] pci 0000:01:0a.1: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.079443] pci 0000:01:0a.1: supports D1 D2 [ 0.079446] pci 0000:01:0a.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.079501] pci 0000:01:0a.1: PME# disabled [ 0.079578] pci 0000:01:0a.2: reg 10 32bit mmio: [0xd0214000-0xd0214fff] [ 0.079618] pci 0000:01:0a.2: supports D1 D2 [ 0.079621] pci 0000:01:0a.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.079676] pci 0000:01:0a.2: PME# disabled [ 0.079753] pci 0000:01:0a.3: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.079770] pci 0000:01:0a.3: supports D1 D2 [ 0.079773] pci 0000:01:0a.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.079829] pci 0000:01:0a.3: PME# disabled [ 0.079928] pci 0000:01:0c.0: reg 10 64bit mmio: [0xd0200000-0xd020ffff] [ 0.079976] pci 0000:01:0c.0: PME# supported from D3hot D3cold [ 0.080006] pci 0000:01:0c.0: PME# disabled [ 0.080085] pci 0000:01:0d.0: reg 10 32bit mmio: [0xd0215000-0xd0215fff] [ 0.080125] pci 0000:01:0d.0: PME# supported from D0 D3hot D3cold [ 0.080180] pci 0000:01:0d.0: PME# disabled [ 0.080256] pci 0000:01:0e.0: reg 10 32bit mmio: [0xd0216000-0xd02167ff] [ 0.080263] pci 0000:01:0e.0: reg 14 32bit mmio: [0xd0210000-0xd0213fff] [ 0.080299] pci 0000:01:0e.0: supports D1 D2 [ 0.080302] pci 0000:01:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.080357] pci 0000:01:0e.0: PME# disabled [ 0.080427] pci 0000:00:1e.0: transparent bridge [ 0.080482] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0200000-0xd02fffff] [ 0.080532] pci_bus 0000:00: on NUMA node 0 [ 0.080538] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.080623] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [ 0.083527] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11) [ 0.084017] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11) [ 0.084459] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11) [ 0.084901] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11) [ 0.085342] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11) [ 0.085784] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11) [ 0.086225] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled. [ 0.086736] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11) [ 0.087150] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.087227] vgaarb: loaded [ 0.087413] SCSI subsystem initialized [ 0.087504] libata version 3.00 loaded. [ 0.087581] usbcore: registered new interface driver usbfs [ 0.087645] usbcore: registered new interface driver hub [ 0.087725] usbcore: registered new device driver usb [ 0.087909] ACPI: WMI: Mapper loaded [ 0.087957] PCI: Using ACPI for IRQ routing [ 0.088162] NetLabel: Initializing [ 0.088210] NetLabel: domain hash size = 128 [ 0.088259] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.088324] NetLabel: unlabeled traffic allowed by default [ 0.088408] Switching to clocksource tsc [ 0.090729] AppArmor: AppArmor Filesystem Enabled [ 0.090789] pnp: PnP ACPI init [ 0.090845] ACPI: bus type pnp registered [ 0.094929] pnp: PnP ACPI: found 11 devices [ 0.094980] ACPI: ACPI bus type pnp unregistered [ 0.095032] PnPBIOS: Disabled by ACPI PNP [ 0.095091] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.095146] system 00:01: ioport range 0xf400-0xf47f has been reserved [ 0.095200] system 00:01: ioport range 0xf480-0xf4ff has been reserved [ 0.095255] system 00:01: ioport range 0xf800-0xf87f has been reserved [ 0.095309] system 00:01: ioport range 0xf880-0xf8ff has been reserved [ 0.095363] system 00:01: ioport range 0xfc00-0xfc7f has been reserved [ 0.095418] system 00:01: ioport range 0xfc80-0xfcbf has been reserved [ 0.095472] system 00:01: ioport range 0xfd00-0xfd6f has been reserved [ 0.095536] system 00:01: ioport range 0xfe00-0xfe01 has been reserved [ 0.095590] system 00:01: ioport range 0xff00-0xff1f has been reserved [ 0.095645] system 00:01: iomem range 0xcd400-0xcffff could not be reserved [ 0.095701] system 00:01: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.095756] system 00:01: iomem range 0xfec10000-0xfec1ffff has been reserved [ 0.130536] pci 0000:01:0a.0: CardBus bridge, secondary bus 0000:02 [ 0.130590] pci 0000:01:0a.0: IO window: 0x003000-0x0030ff [ 0.130644] pci 0000:01:0a.0: IO window: 0x003400-0x0034ff [ 0.130699] pci 0000:01:0a.0: PREFETCH window: 0x80000000-0x83ffffff [ 0.130754] pci 0000:01:0a.0: MEM window: 0x90000000-0x93ffffff [ 0.130809] pci 0000:01:0a.1: CardBus bridge, secondary bus 0000:03 [ 0.130862] pci 0000:01:0a.1: IO window: 0x003800-0x0038ff [ 0.130917] pci 0000:01:0a.1: IO window: 0x003c00-0x003cff [ 0.130971] pci 0000:01:0a.1: PREFETCH window: 0x84000000-0x87ffffff [ 0.131026] pci 0000:01:0a.1: MEM window: 0x94000000-0x97ffffff [ 0.131081] pci 0000:01:0a.3: CardBus bridge, secondary bus 0000:07 [ 0.131134] pci 0000:01:0a.3: IO window: 0x004000-0x0040ff [ 0.131188] pci 0000:01:0a.3: IO window: 0x004400-0x0044ff [ 0.131242] pci 0000:01:0a.3: PREFETCH window: 0x88000000-0x8bffffff [ 0.131298] pci 0000:01:0a.3: MEM window: 0x98000000-0x9bffffff [ 0.131353] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.131407] pci 0000:00:1e.0: IO window: 0x3000-0x4fff [ 0.131461] pci 0000:00:1e.0: MEM window: 0xd0200000-0xd02fffff [ 0.131529] pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x8bffffff [ 0.131595] pci 0000:00:1e.0: setting latency timer to 64 [ 0.131766] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.131819] PCI: setting IRQ 11 as level-triggered [ 0.131825] pci 0000:01:0a.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.131903] pci 0000:01:0a.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.131978] pci 0000:01:0a.3: enabling device (0080 -> 0083) [ 0.132032] pci 0000:01:0a.3: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.132104] pci 0000:01:0a.3: setting latency timer to 64 [ 0.132109] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.132113] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.132116] pci_bus 0000:01: resource 0 io: [0x3000-0x4fff] [ 0.132120] pci_bus 0000:01: resource 1 mem: [0xd0200000-0xd02fffff] [ 0.132123] pci_bus 0000:01: resource 2 pref mem [0x80000000-0x8bffffff] [ 0.132126] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.132129] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.132133] pci_bus 0000:02: resource 0 io: [0x3000-0x30ff] [ 0.132136] pci_bus 0000:02: resource 1 io: [0x3400-0x34ff] [ 0.132139] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x83ffffff] [ 0.132142] pci_bus 0000:02: resource 3 mem: [0x90000000-0x93ffffff] [ 0.132146] pci_bus 0000:03: resource 0 io: [0x3800-0x38ff] [ 0.132149] pci_bus 0000:03: resource 1 io: [0x3c00-0x3cff] [ 0.132152] pci_bus 0000:03: resource 2 pref mem [0x84000000-0x87ffffff] [ 0.132155] pci_bus 0000:03: resource 3 mem: [0x94000000-0x97ffffff] [ 0.132159] pci_bus 0000:07: resource 0 io: [0x4000-0x40ff] [ 0.132162] pci_bus 0000:07: resource 1 io: [0x4400-0x44ff] [ 0.132165] pci_bus 0000:07: resource 2 pref mem [0x88000000-0x8bffffff] [ 0.132168] pci_bus 0000:07: resource 3 mem: [0x98000000-0x9bffffff] [ 0.132201] NET: Registered protocol family 2 [ 0.132347] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.132744] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.133781] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.134501] TCP: Hash tables configured (established 131072 bind 65536) [ 0.134556] TCP reno registered [ 0.134740] NET: Registered protocol family 1 [ 0.134825] pci 0000:00:02.0: Boot video device [ 0.135042] Simple Boot Flag at 0x7f set to 0x1 [ 0.135199] cpufreq-nforce2: No nForce2 chipset. [ 0.135278] Scanning for low memory corruption every 60 seconds [ 0.135475] audit: initializing netlink socket (disabled) [ 0.135579] type=2000 audit(1273432932.135:1): initialized [ 0.147851] Trying to unpack rootfs image as initramfs... [ 0.163565] highmem bounce pool size: 64 pages [ 0.163626] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.165513] VFS: Disk quotas dquot_6.5.2 [ 0.165637] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.171719] fuse init (API version 7.13) [ 0.171887] msgmni has been set to 1690 [ 0.172201] alg: No test for stdrng (krng) [ 0.172319] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.172389] io scheduler noop registered [ 0.172438] io scheduler anticipatory registered [ 0.172488] io scheduler deadline registered [ 0.172588] io scheduler cfq registered (default) [ 0.172784] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.172861] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.173144] ACPI: AC Adapter [AC] (on-line) [ 0.173278] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.173351] ACPI: Power Button [PWRB] [ 0.173446] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.173571] ACPI: Lid Switch [LID] [ 0.173669] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.173737] ACPI: Power Button [PWRF] [ 0.174022] Marking TSC unstable due to TSC halts in idle [ 0.174114] processor LNXCPU:00: registered as cooling_device0 [ 0.177595] Switching to clocksource acpi_pm [ 0.181926] ACPI: Battery Slot [CMB1] (battery present) [ 0.182030] ACPI: Battery Slot [CMB2] (battery absent) [ 0.182091] isapnp: Scanning for PnP cards... [ 0.192366] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.192519] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.192731] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A [ 0.193083] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.193447] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.193504] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.193578] serial 0000:00:1f.6: PCI INT B disabled [ 0.194757] brd: module loaded [ 0.195354] loop: module loaded [ 0.195500] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.195682] ata_piix 0000:00:1f.1: version 2.13 [ 0.195691] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.195920] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.195974] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.200128] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.243771] scsi0 : ata_piix [ 0.243930] scsi1 : ata_piix [ 0.245253] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2440 irq 14 [ 0.245309] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2448 irq 15 [ 0.245799] Fixed MDIO Bus: probed [ 0.245892] PPP generic driver version 2.4.2 [ 0.246012] tun: Universal TUN/TAP device driver, 1.6 [ 0.246063] tun: (C) 1999-2004 Max Krasnyansky [ 0.246219] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.246463] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 0.246517] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 0.246605] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.246609] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.246695] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.246798] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.250743] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.256373] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd0100000 [ 0.276236] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.276478] usb usb1: configuration #1 chosen from 1 choice [ 0.276566] hub 1-0:1.0: USB hub found [ 0.276626] hub 1-0:1.0: 6 ports detected [ 0.276754] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.276827] uhci_hcd: USB Universal Host Controller Interface driver [ 0.276943] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.277021] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.277025] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.277933] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.278026] uhci_hcd 0000:00:1d.0: irq 11, io base 0x000020c0 [ 0.278180] usb usb2: configuration #1 chosen from 1 choice [ 0.278260] hub 2-0:1.0: USB hub found [ 0.278316] hub 2-0:1.0: 2 ports detected [ 0.278651] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.278706] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.278779] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.278783] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.278872] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.278958] uhci_hcd 0000:00:1d.1: irq 11, io base 0x000020e0 [ 0.279106] usb usb3: configuration #1 chosen from 1 choice [ 0.279193] hub 3-0:1.0: USB hub found [ 0.279247] hub 3-0:1.0: 2 ports detected [ 0.279343] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.279417] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.279420] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.279508] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.279593] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00002400 [ 0.279743] usb usb4: configuration #1 chosen from 1 choice [ 0.279822] hub 4-0:1.0: USB hub found [ 0.279876] hub 4-0:1.0: 2 ports detected [ 0.284099] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.286587] i8042.c: Detected active multiplexing controller, rev 1.1. [ 0.292715] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.292780] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.292868] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.292942] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.293015] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.293224] mice: PS/2 mouse device common for all mice [ 0.293442] rtc_cmos 00:04: RTC can wake from S4 [ 0.293541] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.293609] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.293815] device-mapper: uevent: version 1.0.3 [ 0.296397] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.298433] device-mapper: multipath: version 1.1.0 loaded [ 0.298487] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.298716] EISA: Probing bus 0 at eisa.0 [ 0.298773] Cannot allocate resource for EISA slot 1 [ 0.298823] Cannot allocate resource for EISA slot 2 [ 0.298874] Cannot allocate resource for EISA slot 3 [ 0.298925] Cannot allocate resource for EISA slot 4 [ 0.298990] EISA: Detected 0 cards. [ 0.300601] cpuidle: using governor ladder [ 0.300720] cpuidle: using governor menu [ 0.301275] TCP cubic registered [ 0.301513] NET: Registered protocol family 10 [ 0.302077] lo: Disabled Privacy Extensions [ 0.302473] NET: Registered protocol family 17 [ 0.303023] Using IPI No-Shortcut mode [ 0.303174] PM: Resume from disk failed. [ 0.303198] registered taskstats version 1 [ 0.303530] Magic number: 10:507:394 [ 0.303693] rtc_cmos 00:04: setting system clock to 2010-05-09 19:22:12 UTC (1273432932) [ 0.303764] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.303816] EDD information not available. [ 0.363129] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.453108] ata2.00: ATA-6: TOSHIBA MK6025GAS, KA200A, max UDMA/100 [ 0.453170] ata2.00: 117210240 sectors, multi 16: LBA [ 0.453357] ata1.00: ATA-6: FUJITSU MHT2080AH, 006C, max UDMA/100 [ 0.453411] ata1.00: 156301488 sectors, multi 16: LBA [ 0.460775] ata2.00: configured for UDMA/100 [ 0.468869] ata1.00: configured for UDMA/100 [ 0.619811] usb 1-6: new high speed USB device using ehci_hcd and address 2 [ 0.721220] Freeing initrd memory: 7781k freed [ 0.816303] isapnp: No Plug & Play device found [ 0.816607] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080A 006C PQ: 0 ANSI: 5 [ 0.816937] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.817184] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK6025GA KA20 PQ: 0 ANSI: 5 [ 0.817397] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 0.817531] sd 1:0:0:0: [sdb] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 0.817654] sd 1:0:0:0: [sdb] Write Protect is off [ 0.817706] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.817735] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.817908] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 0.818062] sd 0:0:0:0: [sda] Write Protect is off [ 0.818114] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.818176] sdb: [ 0.818337] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.818580] sda: [ 0.832466] usb 1-6: configuration #1 chosen from 1 choice [ 0.832662] hub 1-6:1.0: USB hub found [ 0.832880] hub 1-6:1.0: 4 ports detected [ 0.870293] sdb1 sdb2 < sdb5 sda1 sda2 < sda5 sdb6 > [ 0.914743] sda6 > sda3 [ 0.915260] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.928646] sd 1:0:0:0: [sdb] Attached SCSI disk [ 0.928715] Freeing unused kernel memory: 656k freed [ 0.929312] Write protecting the kernel text: 4676k [ 0.929404] Write protecting the kernel read-only data: 1840k [ 0.947938] udev: starting version 151 [ 1.104226] usb 1-6.2: new low speed USB device using ehci_hcd and address 3 [ 1.203793] usb 1-6.2: configuration #1 chosen from 1 choice [ 1.241762] tg3.c:v3.102 (September 1, 2009) [ 1.242068] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [ 1.242125] tg3 0000:01:0c.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 1.253307] usbcore: registered new interface driver hiddev [ 1.285993] usb 1-6.3: new high speed USB device using ehci_hcd and address 4 [ 1.289667] eth0: Tigon3 [partno(BCM95788MT58) rev 3003] (PCI:33MHz:32-bit) MAC address 00:0b:5d:7f:9b:c4 [ 1.289767] eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0]) [ 1.289839] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.289895] eth0: dma_rwctrl[763f0000] dma_mask[64-bit] [ 1.290403] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 [ 1.290487] ohci1394 0000:01:0e.0: PCI INT A -> Link[LNKF] -> GSI 11 (level, low) -> IRQ 11 [ 1.300202] hub 1-6:1.0: hub_port_status failed (err = -32) [ 1.344061] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[d0216000-d02167ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.469325] EXT3-fs: INFO: recovery required on readonly filesystem. [ 1.469384] EXT3-fs: write access will be enabled during recovery. [ 1.504173] hub 1-6:1.0: hub_port_status failed (err = -32) [ 1.530727] kjournald starting. Commit interval 5 seconds [ 1.530789] EXT3-fs: recovery complete. [ 1.532384] EXT3-fs: mounted filesystem with ordered data mode. [ 1.708163] hub 1-6:1.0: hub_port_status failed (err = -32) [ 1.912210] hub 1-6:1.0: hub_port_status failed (err = -32) [ 2.116186] hub 1-6:1.0: hub_port_status failed (err = -32) [ 2.116244] hub 1-6:1.0: Cannot enable port 3. Maybe the USB cable is bad? [ 2.132174] hub 1-6:1.0: hub_port_status failed (err = -32) [ 2.336128] hub 1-6:1.0: hub_port_status failed (err = -32) [ 2.540133] hub 1-6:1.0: hub_port_status failed (err = -32) [ 2.616171] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000e10029c72a9] [ 2.744226] hub 1-6:1.0: hub_port_status failed (err = -32) [ 2.948181] hub 1-6:1.0: hub_port_status failed (err = -32) [ 2.948241] hub 1-6:1.0: Cannot enable port 3. Maybe the USB cable is bad? [ 2.964157] hub 1-6:1.0: hub_port_status failed (err = -32) [ 3.168138] hub 1-6:1.0: hub_port_status failed (err = -32) [ 3.372236] hub 1-6:1.0: hub_port_status failed (err = -32) [ 3.576222] hub 1-6:1.0: hub_port_status failed (err = -32) [ 3.780190] hub 1-6:1.0: hub_port_status failed (err = -32) [ 3.780265] hub 1-6:1.0: Cannot enable port 3. Maybe the USB cable is bad? [ 3.796148] hub 1-6:1.0: hub_port_status failed (err = -32) [ 4.000149] hub 1-6:1.0: hub_port_status failed (err = -32) [ 4.204232] hub 1-6:1.0: hub_port_status failed (err = -32) [ 4.408188] hub 1-6:1.0: hub_port_status failed (err = -32) [ 4.612175] hub 1-6:1.0: hub_port_status failed (err = -32) [ 4.612252] hub 1-6:1.0: Cannot enable port 3. Maybe the USB cable is bad? [ 4.612388] hub 1-6:1.0: unable to enumerate USB device on port 3 [ 4.612637] hub 1-6:1.0: hub_port_status failed (err = -32) [ 4.868728] hub 1-6:1.0: hub_port_status failed (err = -32) [ 5.124682] hub 1-6:1.0: hub_port_status failed (err = -32) [ 5.380640] hub 1-6:1.0: hub_port_status failed (err = -32) [ 5.636596] hub 1-6:1.0: hub_port_status failed (err = -32) [ 5.892554] hub 1-6:1.0: hub_port_status failed (err = -32) [ 6.148504] hub 1-6:1.0: hub_port_status failed (err = -32) [ 6.256171] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.2/1-6.2:1.0/input/input5 [ 6.256372] generic-usb 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.7-6.2/input0 [ 6.256480] usbcore: registered new interface driver usbhid [ 6.256534] usbhid: v2.6:USB HID core driver [ 22.664921] Adding 2931820k swap on /dev/sdb1. Priority:-1 extents:1 across:2931820k [ 22.724955] udev: starting version 151 [ 22.975241] lp: driver loaded but no devices found [ 23.080790] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.081350] Linux agpgart interface v0.103 [ 23.104460] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input6 [ 23.104534] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 23.144600] intel_rng: FWH not detected [ 23.305580] EXT3 FS on sdb5, internal journal [ 23.370770] [drm] Initialized drm 1.1.0 20060810 [ 23.423775] psmouse serio4: ID: 10 10 10 [ 23.432844] type=1505 audit(1273432955.628:2): operation="profile_load" pid=609 name="/sbin/dhclient3" [ 23.433546] type=1505 audit(1273432955.628:3): operation="profile_load" pid=609 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 23.433928] type=1505 audit(1273432955.628:4): operation="profile_load" pid=609 name="/usr/lib/connman/scripts/dhclient-script" [ 23.434691] irda_init() [ 23.434710] NET: Registered protocol family 23 [ 23.444546] parport_pc 00:0a: reported by Plug and Play ACPI [ 23.444577] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 23.446047] agpgart-intel 0000:00:00.0: Intel 855GM Chipset [ 23.446908] agpgart-intel 0000:00:00.0: detected 8060K stolen memory [ 23.478175] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd8000000 [ 23.503044] input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:05/FUJ02B1:00/input/input7 [ 23.503880] ACPI: Fujitsu FUJ02B1 [FJEX] (on) [ 23.505637] fujitsu-laptop: driver 0.6.0 successfully loaded. [ 23.528458] lp0: using parport0 (interrupt-driven). [ 23.530748] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227 [ 23.530764] smsc_superio_flat(): fir: 0x400, sir: 0x2e8, dma: 03, irq: 3, mode: 0x0e [ 23.530769] smsc_ircc_present: can't get sir_base of 0x2e8 [ 23.551035] lib80211: common routines for IEEE802.11 drivers [ 23.551041] lib80211_crypt: registered algorithm 'NULL' [ 23.558591] ppdev: user-space parallel port driver [ 23.632090] [drm] i915 disabling kernel modesetting for known bad device. [ 23.632121] pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 23.632128] pci 0000:00:02.0: setting latency timer to 64 [ 23.647342] yenta_cardbus 0000:01:0a.0: CardBus bridge found [10cf:11c4] [ 23.647363] yenta_cardbus 0000:01:0a.0: O2: res at 0x94/0xD4: ea/00 [ 23.647366] yenta_cardbus 0000:01:0a.0: O2: enabling read prefetch/write burst [ 23.647431] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 23.647433] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 23.660985] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 23.679305] vga16fb: initializing [ 23.679310] vga16fb: mapped to 0xc00a0000 [ 23.679395] fb0: VGA16 VGA frame buffer device [ 23.683199] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 23.683204] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 23.772745] yenta_cardbus 0000:01:0a.0: ISA IRQ mask 0x0438, PCI irq 11 [ 23.772750] yenta_cardbus 0000:01:0a.0: Socket status: 30000006 [ 23.772758] yenta_cardbus 0000:01:0a.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x4fff [ 23.772763] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x4fff: clean. [ 23.773240] yenta_cardbus 0000:01:0a.0: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff [ 23.773243] yenta_cardbus 0000:01:0a.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x8bffffff [ 23.780328] ipw2200 0000:01:0d.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 23.782221] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 23.782274] ipw2200 0000:01:0d.0: firmware: requesting ipw2200-bss.fw [ 23.975994] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 23.976047] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 24.056652] Console: switching to colour frame buffer device 80x30 [ 24.073430] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels) [ 24.073497] yenta_cardbus 0000:01:0a.1: CardBus bridge found [10cf:11c4] [ 24.117133] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input8 [ 24.200742] yenta_cardbus 0000:01:0a.1: ISA IRQ mask 0x0438, PCI irq 11 [ 24.200748] yenta_cardbus 0000:01:0a.1: Socket status: 30000410 [ 24.200753] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #03 to #06 [ 24.200766] yenta_cardbus 0000:01:0a.1: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x4fff [ 24.200771] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3000-0x4fff: clean. [ 24.201248] yenta_cardbus 0000:01:0a.1: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff [ 24.201253] yenta_cardbus 0000:01:0a.1: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x8bffffff [ 24.201835] yenta_cardbus 0000:01:0a.3: CardBus bridge found [10cf:11c4] [ 24.328772] yenta_cardbus 0000:01:0a.3: ISA IRQ mask 0x0438, PCI irq 11 [ 24.328777] yenta_cardbus 0000:01:0a.3: Socket status: 30000006 [ 24.328782] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #06 to #0a [ 24.328794] yenta_cardbus 0000:01:0a.3: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x4fff [ 24.328799] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3000-0x4fff: clean. [ 24.329276] yenta_cardbus 0000:01:0a.3: pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff [ 24.329280] yenta_cardbus 0000:01:0a.3: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x8bffffff [ 24.808309] intel8x0_measure_ac97_clock: measured 55675 usecs (2682 samples) [ 24.808314] intel8x0: clocking to 48000 [ 24.836063] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1 [ 24.856042] pcmcia_socket pcmcia_socket1: cs: memory probe 0xd0200000-0xd02fffff: excluding 0xd0200000-0xd021ffff [ 24.870550] pcmcia 1.0: pcmcia: registering new device pcmcia1.0 [ 25.150694] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 25.152283] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x407 [ 25.152935] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 25.153504] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 25.154242] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 25.159604] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x100-0x3af: clean. [ 25.161877] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x407 [ 25.162530] pcmcia_socket pcmcia_socket2: cs: IO port probe 0x820-0x8ff: clean. [ 25.163099] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xc00-0xcf7: clean. [ 25.163838] pcmcia_socket pcmcia_socket2: cs: IO port probe 0xa00-0xaff: clean. [ 25.165100] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. [ 25.166665] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x407 [ 25.167317] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 25.167887] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 25.169317] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 25.229768] kjournald starting. Commit interval 5 seconds [ 25.229927] EXT3 FS on sdb6, internal journal [ 25.229933] EXT3-fs: mounted filesystem with ordered data mode. [ 25.476797] type=1505 audit(1273432957.672:5): operation="profile_load" pid=839 name="/usr/share/gdm/guest-session/Xsession" [ 25.483836] type=1505 audit(1273432957.676:6): operation="profile_replace" pid=842 name="/sbin/dhclient3" [ 25.502176] type=1505 audit(1273432957.696:7): operation="profile_replace" pid=842 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 25.502574] type=1505 audit(1273432957.696:8): operation="profile_replace" pid=842 name="/usr/lib/connman/scripts/dhclient-script" [ 25.515186] type=1505 audit(1273432957.708:9): operation="profile_load" pid=844 name="/usr/bin/evince" [ 25.530069] tg3 0000:01:0c.0: firmware: requesting tigon/tg3_tso5.bin [ 25.819545] type=1505 audit(1273432958.012:10): operation="profile_load" pid=844 name="/usr/bin/evince-previewer" [ 25.839430] type=1505 audit(1273432958.032:11): operation="profile_load" pid=844 name="/usr/bin/evince-thumbnailer" [ 25.864130] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 27.411981] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 27.411985] tg3: eth0: Flow control is on for TX and on for RX. [ 27.412234] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 36.620027] eth1: no IPv6 routers present [ 37.588024] eth0: no IPv6 routers present