[ 38.206351] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 38.206354] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 38.206355] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 38.206356] vboxdrv: the usage of hardware performance counters by [ 38.206357] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 38.206360] vboxdrv: Found 4 processor cores. [ 38.206507] vboxdrv: fAsync=0 offMin=0x477 offMax=0x8037 [ 38.206555] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 38.206557] vboxdrv: Successfully loaded version 3.1.6_OSE (interface 0x00100001). [ 38.269429] ppdev: user-space parallel port driver [ 46.940022] eth0: no IPv6 routers present [ 585.658939] PM: Syncing filesystems ... done. [ 585.661833] PM: Preparing system for mem sleep [ 585.661837] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 585.663048] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 585.663336] PM: Entering mem sleep [ 585.663346] Suspending console(s) (use no_console_suspend to debug) [ 585.728025] sd 3:0:0:0: [sda] Synchronizing SCSI cache [ 586.010502] sd 3:0:0:0: [sda] Stopping disk [ 586.028211] ACPI handle has no context! [ 586.028498] serial 00:05: disabled [ 586.065864] forcedeth 0000:00:14.0: wake-up capability disabled by ACPI [ 586.065871] forcedeth 0000:00:14.0: PME# disabled [ 586.065877] forcedeth 0000:00:14.0: PCI INT A disabled [ 586.192049] HDA Intel 0000:00:10.1: PCI INT B disabled [ 586.208144] sata_nv 0000:00:0f.0: PCI INT A disabled [ 586.224152] sata_nv 0000:00:0e.0: PCI INT A disabled [ 586.256025] ehci_hcd 0000:00:0b.1: PCI INT B disabled [ 586.256034] ohci_hcd 0000:00:0b.0: PCI INT A disabled [ 586.256102] PM: suspend devices took 0.596 seconds [ 586.256307] ehci_hcd 0000:00:0b.1: PME# enabled [ 586.256314] ehci_hcd 0000:00:0b.1: wake-up capability enabled by ACPI [ 586.272050] ohci_hcd 0000:00:0b.0: PME# enabled [ 586.272056] ohci_hcd 0000:00:0b.0: wake-up capability enabled by ACPI [ 586.288936] ACPI: Preparing to enter system sleep state S3 [ 586.289550] Disabling non-boot CPUs ... [ 586.290730] Breaking affinity for irq 23 [ 586.291744] kvm: disabling virtualization on CPU1 [ 586.392030] CPU 1 is now offline [ 586.392359] CPU0 attaching NULL sched-domain. [ 586.392361] CPU1 attaching NULL sched-domain. [ 586.392363] CPU2 attaching NULL sched-domain. [ 586.392365] CPU3 attaching NULL sched-domain. [ 586.404040] CPU0 attaching sched-domain: [ 586.404044] domain 0: span 0,2-3 level CPU [ 586.404047] groups: 0 2-3 [ 586.404052] CPU2 attaching sched-domain: [ 586.404054] domain 0: span 2-3 level MC [ 586.404057] groups: 2 3 [ 586.404061] domain 1: span 0,2-3 level CPU [ 586.404064] groups: 2-3 0 [ 586.404069] CPU3 attaching sched-domain: [ 586.404071] domain 0: span 2-3 level MC [ 586.404073] groups: 3 2 [ 586.404078] domain 1: span 0,2-3 level CPU [ 586.404080] groups: 2-3 0 [ 586.404661] CPU1 is down [ 586.406845] kvm: disabling virtualization on CPU2 [ 586.406886] CPU 2 is now offline [ 586.407066] CPU0 attaching NULL sched-domain. [ 586.407068] CPU2 attaching NULL sched-domain. [ 586.407070] CPU3 attaching NULL sched-domain. [ 586.420058] CPU0 attaching sched-domain: [ 586.420061] domain 0: span 0,3 level CPU [ 586.420063] groups: 0 3 [ 586.420068] CPU3 attaching sched-domain: [ 586.420071] domain 0: span 0,3 level CPU [ 586.420073] groups: 3 0 [ 586.420455] CPU2 is down [ 586.421597] Breaking affinity for irq 19 [ 586.421614] Breaking affinity for irq 22 [ 586.422634] kvm: disabling virtualization on CPU3 [ 586.524024] CPU 3 is now offline [ 586.524026] SMP alternatives: switching to UP code [ 586.528983] CPU0 attaching NULL sched-domain. [ 586.528985] CPU3 attaching NULL sched-domain. [ 586.528989] CPU0 attaching NULL sched-domain. [ 586.529135] CPU3 is down [ 586.529140] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 586.529140] Back to C! [ 586.529140] CPU0: Thermal monitoring enabled (TM1) [ 586.529140] Enabling non-boot CPUs ... [ 586.529140] SMP alternatives: switching to SMP code [ 586.535437] Booting processor 1 APIC 0x1 ip 0x6000 [ 586.392231] Initializing CPU#1 [ 586.392231] Calibrating delay using timer specific routine.. 4803.15 BogoMIPS (lpj=9606319) [ 586.392231] CPU: L1 I cache: 32K, L1 D cache: 32K [ 586.392231] CPU: L2 cache: 4096K [ 586.392231] CPU: Physical Processor ID: 0 [ 586.392231] CPU: Processor Core ID: 1 [ 586.392231] mce: CPU supports 6 MCE banks [ 586.392231] CPU1: Thermal monitoring enabled (TM1) [ 586.392231] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 586.625226] CPU1: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 [ 586.625238] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 586.645244] kvm: enabling virtualization on CPU1 [ 586.645308] CPU0 attaching NULL sched-domain. [ 586.648537] Switched to high resolution mode on CPU 1 [ 586.660051] CPU0 attaching sched-domain: [ 586.660054] domain 0: span 0-1 level MC [ 586.660057] groups: 0 1 [ 586.660063] CPU1 attaching sched-domain: [ 586.660065] domain 0: span 0-1 level MC [ 586.660068] groups: 1 0 [ 586.660551] CPU1 is up [ 586.660829] Booting processor 2 APIC 0x2 ip 0x6000 [ 586.406971] Initializing CPU#2 [ 586.406971] Calibrating delay using timer specific routine.. 4803.14 BogoMIPS (lpj=9606290) [ 586.406971] CPU: L1 I cache: 32K, L1 D cache: 32K [ 586.406971] CPU: L2 cache: 4096K [ 586.406971] CPU: Physical Processor ID: 0 [ 586.406971] CPU: Processor Core ID: 2 [ 586.406971] mce: CPU supports 6 MCE banks [ 586.406971] CPU2: Thermal monitoring enabled (TM1) [ 586.406971] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 586.749228] CPU2: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 [ 586.749239] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 586.769247] kvm: enabling virtualization on CPU2 [ 586.769274] CPU0 attaching NULL sched-domain. [ 586.769277] CPU1 attaching NULL sched-domain. [ 586.772020] Switched to high resolution mode on CPU 2 [ 586.784052] CPU0 attaching sched-domain: [ 586.784054] domain 0: span 0-1 level MC [ 586.784057] groups: 0 1 [ 586.784061] domain 1: span 0-2 level CPU [ 586.784064] groups: 0-1 2 [ 586.784069] CPU1 attaching sched-domain: [ 586.784072] domain 0: span 0-1 level MC [ 586.784074] groups: 1 0 [ 586.784078] domain 1: span 0-2 level CPU [ 586.784081] groups: 0-1 2 [ 586.784086] CPU2 attaching sched-domain: [ 586.784088] domain 0: span 0-2 level CPU [ 586.784090] groups: 2 0-1 [ 586.784729] CPU2 is up [ 586.785110] Booting processor 3 APIC 0x3 ip 0x6000 [ 586.528900] Initializing CPU#3 [ 586.528900] Calibrating delay using timer specific routine.. 4803.15 BogoMIPS (lpj=9606307) [ 586.528900] CPU: L1 I cache: 32K, L1 D cache: 32K [ 586.528900] CPU: L2 cache: 4096K [ 586.528900] CPU: Physical Processor ID: 0 [ 586.528900] CPU: Processor Core ID: 3 [ 586.528900] mce: CPU supports 6 MCE banks [ 586.528900] CPU3: Thermal monitoring enabled (TM1) [ 586.528900] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 586.877178] CPU3: Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07 [ 586.877191] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 586.897199] kvm: enabling virtualization on CPU3 [ 586.897227] CPU0 attaching NULL sched-domain. [ 586.897230] CPU1 attaching NULL sched-domain. [ 586.897232] CPU2 attaching NULL sched-domain. [ 586.900021] Switched to high resolution mode on CPU 3 [ 586.908053] CPU0 attaching sched-domain: [ 586.908056] domain 0: span 0-1 level MC [ 586.908058] groups: 0 1 [ 586.908063] domain 1: span 0-3 level CPU [ 586.908065] groups: 0-1 2-3 [ 586.908071] CPU1 attaching sched-domain: [ 586.908073] domain 0: span 0-1 level MC [ 586.908076] groups: 1 0 [ 586.908080] domain 1: span 0-3 level CPU [ 586.908082] groups: 0-1 2-3 [ 586.908087] CPU2 attaching sched-domain: [ 586.908090] domain 0: span 2-3 level MC [ 586.908092] groups: 2 3 [ 586.908096] domain 1: span 0-3 level CPU [ 586.908098] groups: 2-3 0-1 [ 586.908103] CPU3 attaching sched-domain: [ 586.908106] domain 0: span 2-3 level MC [ 586.908108] groups: 3 2 [ 586.908112] domain 1: span 0-3 level CPU [ 586.908114] groups: 2-3 0-1 [ 586.908907] CPU3 is up [ 586.908910] ACPI: Waking up from system sleep state S3 [ 586.909281] pci 0000:00:00.3: restoring config space at offset 0xf (was 0x0, writing 0xff) [ 586.909305] pci 0000:00:00.4: restoring config space at offset 0xf (was 0x0, writing 0xff) [ 586.909360] pci 0000:00:00.6: restoring config space at offset 0x1 (was 0x200000, writing 0x200002) [ 586.909389] pci 0000:00:01.0: restoring config space at offset 0xf (was 0x0, writing 0xff) [ 586.909408] pci 0000:00:01.1: restoring config space at offset 0xf (was 0x0, writing 0xff) [ 586.909427] pci 0000:00:01.2: restoring config space at offset 0xf (was 0x0, writing 0xff) [ 586.909447] pci 0000:00:01.3: restoring config space at offset 0xf (was 0x0, writing 0xff) [ 586.909466] pci 0000:00:01.4: restoring config space at offset 0xf (was 0x0, writing 0xff) [ 586.909485] pci 0000:00:01.5: restoring config space at offset 0xf (was 0x0, writing 0xff) [ 586.909505] pci 0000:00:01.6: restoring config space at offset 0xf (was 0x0, writing 0xff) [ 586.909524] pci 0000:00:02.0: restoring config space at offset 0xf (was 0x0, writing 0xff) [ 586.909544] pci 0000:00:02.1: restoring config space at offset 0xf (was 0x0, writing 0xff) [ 586.909566] pci 0000:00:02.2: restoring config space at offset 0xf (was 0x0, writing 0xff) [ 586.909602] pcieport-driver 0000:00:03.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 586.909650] pcieport-driver 0000:00:06.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) [ 586.909697] pcieport-driver 0000:00:07.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100404) [ 586.909847] pci 0000:00:0a.0: restoring config space at offset 0xb (was 0xcb8410de, writing 0x73461462) [ 586.909860] pci 0000:00:0a.0: restoring config space at offset 0x4 (was 0x0, writing 0x4f01) [ 586.909891] nForce2_smbus 0000:00:0a.1: restoring config space at offset 0xb (was 0xcb8410de, writing 0x73461462) [ 586.909937] pci 0000:00:0a.2: restoring config space at offset 0xb (was 0xcb8410de, writing 0x73461462) [ 586.909989] ohci_hcd 0000:00:0b.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003) [ 586.910006] ohci_hcd 0000:00:0b.0: wake-up capability disabled by ACPI [ 586.910011] ohci_hcd 0000:00:0b.0: PME# disabled [ 586.910042] ehci_hcd 0000:00:0b.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) [ 586.910064] ehci_hcd 0000:00:0b.1: wake-up capability disabled by ACPI [ 586.910068] ehci_hcd 0000:00:0b.1: PME# disabled [ 586.910317] HDA Intel 0000:00:10.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002) [ 586.910402] nvidia 0000:01:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 586.910409] nvidia 0000:01:00.0: restoring config space at offset 0x9 (was 0x1, writing 0xdc01) [ 586.910414] nvidia 0000:01:00.0: restoring config space at offset 0x7 (was 0x4, writing 0xfa000004) [ 586.910418] nvidia 0000:01:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xd000000c) [ 586.910422] nvidia 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfd000000) [ 586.910427] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) [ 586.910591] nForce2_smbus 0000:00:0a.1: PME# disabled [ 586.910594] ohci_hcd 0000:00:0b.0: wake-up capability disabled by ACPI [ 586.910599] ohci_hcd 0000:00:0b.0: PME# disabled [ 586.910606] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20 [ 586.910612] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 586.932027] ehci_hcd 0000:00:0b.1: wake-up capability disabled by ACPI [ 586.932033] ehci_hcd 0000:00:0b.1: PME# disabled [ 586.932039] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21 [ 586.932046] ehci_hcd 0000:00:0b.1: setting latency timer to 64 [ 586.932060] pata_amd 0000:00:0d.0: setting latency timer to 64 [ 586.932078] sata_nv 0000:00:0e.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 586.932083] sata_nv 0000:00:0e.0: setting latency timer to 64 [ 586.932101] sata_nv 0000:00:0f.0: PCI INT A -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22 [ 586.932106] sata_nv 0000:00:0f.0: setting latency timer to 64 [ 586.932124] pci 0000:00:10.0: setting latency timer to 64 [ 586.932133] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22 [ 586.932140] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 586.932167] forcedeth 0000:00:14.0: wake-up capability disabled by ACPI [ 586.932172] forcedeth 0000:00:14.0: PME# disabled [ 587.663588] ata1: SATA link down (SStatus 0 SControl 300) [ 587.674609] ata2: SATA link down (SStatus 0 SControl 300) [ 587.676040] ata3: SATA link down (SStatus 0 SControl 300) [ 587.853945] pci 0000:04:06.0: PME# disabled [ 587.854998] serial 00:05: activated [ 587.892467] ata6.01: ACPI cmd ef/03:42:00:00:00:b0 filtered out [ 587.892470] ata6.01: ACPI cmd f5/00:00:00:00:00:00 filtered out [ 587.900459] ata6.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out [ 587.900461] ata6.00: ACPI cmd f5/00:00:00:00:00:00 filtered out [ 587.900491] ata6: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c0) ACPI=0x1f01f (30:60:0x15) [ 587.900494] ata6: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc5c0) ACPI=0x701f (30:60:0x15) [ 587.916406] ata6.00: configured for UDMA/66 [ 587.948570] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 588.001098] sd 3:0:0:0: [sda] Starting disk [ 588.028896] ata4.00: ACPI cmd ef/03:46:00:00:00:a0 filtered out [ 588.028899] ata4.00: ACPI cmd f5/00:00:00:00:00:00 filtered out [ 588.135888] ata4.00: configured for UDMA/133 [ 588.212399] ata6.01: configured for UDMA/33 [ 588.338104] PM: resume devices took 1.428 seconds [ 588.345484] PM: Finishing wakeup. [ 588.345486] Restarting tasks ... done. [ 588.754291] eth0: no link during initialization. [ 588.754809] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 590.935006] eth0: link up. [ 590.935750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 601.544007] eth0: no IPv6 routers present