[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-20-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #58-Ubuntu SMP Fri Mar 12 04:38:19 UTC 2010 (Ubuntu 2.6.31-20.58-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic root=UUID=d1097982-89dc-4684-ada7-6b4ea5b0979a ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf770000 (usable) [ 0.000000] BIOS-e820: 00000000bf770000 - 00000000bf788000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf788000 - 00000000bf7dc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] DMI 2.6 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-E7FFF write-through [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf770 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009e800 (usable) [ 0.000000] modified: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bf770000 (usable) [ 0.000000] modified: 00000000bf770000 - 00000000bf788000 (ACPI data) [ 0.000000] modified: 00000000bf788000 - 00000000bf7dc000 (ACPI NVS) [ 0.000000] modified: 00000000bf7dc000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000240000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf770000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf770000 page 4k [ 0.000000] kernel direct mapping tables up to bf770000 @ 10000-15000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000240000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0240000000 page 2M [ 0.000000] kernel direct mapping tables up to 240000000 @ 13000-1d000 [ 0.000000] RAMDISK: 378b6000 - 37fefaeb [ 0.000000] ACPI: RSDP 00000000000fb920 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bf770100 00064 (v01 022210 XSDT2034 20100222 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf770290 000F4 (v03 022210 FACP2034 20100222 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf7704a0 0EEBA (v01 A1511 A1511001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bf788000 00040 [ 0.000000] ACPI: APIC 00000000bf770390 000CC (v01 022210 APIC2034 20100222 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf770460 0003C (v01 022210 OEMMCFG 20100222 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf788040 00072 (v01 022210 OEMB2034 20100222 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bf77f7a0 00038 (v01 022210 OEMHPET 20100222 MSFT 00000097) [ 0.000000] ACPI: ASPT 00000000bf77fa40 00034 (v06 022210 PerfTune 20100222 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000bf77fa80 000B0 (v01 022210 OEMOSFR 20100222 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf789c00 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000240000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000240000000 [ 0.000000] NODE_DATA [0000000000018000 - 000000000001cfff] [ 0.000000] bootmap [000000000001d000 - 0000000000064fff] pages 48 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0240000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019e8c8c] TEXT DATA BSS ==> [0001000000 - 00019e8c8c] [ 0.000000] #3 [00378b6000 - 0037fefaeb] RAMDISK ==> [00378b6000 - 0037fefaeb] [ 0.000000] #4 [000009e800 - 0000100000] BIOS reserved ==> [000009e800 - 0000100000] [ 0.000000] #5 [00019e9000 - 00019e92c0] BRK ==> [00019e9000 - 00019e92c0] [ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] [ 0.000000] #7 [0000013000 - 0000018000] PGTABLE ==> [0000013000 - 0000018000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00240000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bf770 [ 0.000000] 0: 0x00100000 -> 0x00240000 [ 0.000000] On node 0 totalpages: 2094846 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 108 pages reserved [ 0.000000] DMA zone: 3818 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765864 pages, LIFO batch:31 [ 0.000000] Normal zone: 17920 pages used for memmap [ 0.000000] Normal zone: 1292800 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf770000 - 00000000bf788000 [ 0.000000] PM: Registered nosave memory: 00000000bf788000 - 00000000bf7dc000 [ 0.000000] PM: Registered nosave memory: 00000000bf7dc000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff880028034000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062482 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic root=UUID=d1097982-89dc-4684-ada7-6b4ea5b0979a ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 8178944k/9437184k available (5327k kernel code, 1057800k absent, 200440k reserved, 3014k data, 664k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:536 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3476.817 MHz processor. [ 0.000901] Console: colour VGA+ 80x25 [ 0.000902] console [tty0] enabled [ 0.013487] allocated 83886080 bytes of page_cgroup [ 0.013489] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.013589] hpet clockevent registered [ 0.013595] alloc irq_desc for 24 on node 0 [ 0.013597] alloc kstat_irqs on node 0 [ 0.013603] alloc irq_desc for 25 on node 0 [ 0.013604] alloc kstat_irqs on node 0 [ 0.013606] alloc irq_desc for 26 on node 0 [ 0.013607] alloc kstat_irqs on node 0 [ 0.013609] alloc irq_desc for 27 on node 0 [ 0.013610] alloc kstat_irqs on node 0 [ 0.013612] alloc irq_desc for 28 on node 0 [ 0.013612] alloc kstat_irqs on node 0 [ 0.013614] HPET: 8 timers in total, 5 timers will be used for per-cpu timer [ 0.013618] Calibrating delay loop (skipped), value calculated using timer frequency.. 6953.63 BogoMIPS (lpj=34768170) [ 0.013632] Security Framework initialized [ 0.013645] AppArmor: AppArmor initialized [ 0.014017] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.015436] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.016088] Mount-cache hash table entries: 256 [ 0.016175] Initializing cgroup subsys ns [ 0.016178] Initializing cgroup subsys cpuacct [ 0.016180] Initializing cgroup subsys memory [ 0.016184] Initializing cgroup subsys freezer [ 0.016185] Initializing cgroup subsys net_cls [ 0.016194] CPU: Physical Processor ID: 0 [ 0.016195] CPU: Processor Core ID: 0 [ 0.016198] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.016199] CPU: L2 cache: 256K [ 0.016200] CPU: L3 cache: 4096K [ 0.016201] CPU 0/0x0 -> Node 0 [ 0.016204] mce: CPU supports 9 MCE banks [ 0.016211] CPU0: Thermal monitoring enabled (TM1) [ 0.016214] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 [ 0.016219] using mwait in idle threads. [ 0.016220] Performance Counters: Nehalem/Corei7 events, Intel PMU driver. [ 0.016224] ... version: 3 [ 0.016225] ... bit width: 48 [ 0.016225] ... generic counters: 4 [ 0.016226] ... value mask: 0000ffffffffffff [ 0.016227] ... max period: 000000007fffffff [ 0.016228] ... fixed-purpose counters: 3 [ 0.016229] ... counter mask: 000000070000000f [ 0.017539] ACPI: Core revision 20090521 [ 0.137436] Setting APIC routing to flat [ 0.137753] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.237582] CPU0: Intel(R) Core(TM) i5 CPU 670 @ 3.47GHz stepping 02 [ 0.353140] Booting processor 1 APIC 0x4 ip 0x6000 [ 0.363449] Initializing CPU#1 [ 0.512799] Calibrating delay using timer specific routine.. 6954.89 BogoMIPS (lpj=34774476) [ 0.512805] CPU: Physical Processor ID: 0 [ 0.512806] CPU: Processor Core ID: 2 [ 0.512808] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.512808] CPU: L2 cache: 256K [ 0.512809] CPU: L3 cache: 4096K [ 0.512810] CPU 1/0x4 -> Node 0 [ 0.512812] mce: CPU supports 9 MCE banks [ 0.512820] CPU1: Thermal monitoring enabled (TM1) [ 0.512822] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 [ 0.513421] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.514221] CPU1: Intel(R) Core(TM) i5 CPU 670 @ 3.47GHz stepping 02 [ 0.514229] Skipping synchronization checks as TSC is reliable. [ 0.514305] Booting processor 2 APIC 0x1 ip 0x6000 [ 0.524514] Initializing CPU#2 [ 0.672543] Calibrating delay using timer specific routine.. 6954.88 BogoMIPS (lpj=34774425) [ 0.672550] CPU: Physical Processor ID: 0 [ 0.672551] CPU: Processor Core ID: 0 [ 0.672553] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.672555] CPU: L2 cache: 256K [ 0.672555] CPU: L3 cache: 4096K [ 0.672557] CPU 2/0x1 -> Node 0 [ 0.672560] mce: CPU supports 9 MCE banks [ 0.672567] CPU2: Thermal monitoring enabled (TM1) [ 0.672570] CPU 2 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 [ 0.673364] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.674323] CPU2: Intel(R) Core(TM) i5 CPU 670 @ 3.47GHz stepping 02 [ 0.674331] Skipping synchronization checks as TSC is reliable. [ 0.674413] Booting processor 3 APIC 0x5 ip 0x6000 [ 0.684621] Initializing CPU#3 [ 0.832287] Calibrating delay using timer specific routine.. 6954.89 BogoMIPS (lpj=34774460) [ 0.832293] CPU: Physical Processor ID: 0 [ 0.832294] CPU: Processor Core ID: 2 [ 0.832296] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.832297] CPU: L2 cache: 256K [ 0.832297] CPU: L3 cache: 4096K [ 0.832299] CPU 3/0x5 -> Node 0 [ 0.832301] mce: CPU supports 9 MCE banks [ 0.832308] CPU3: Thermal monitoring enabled (TM1) [ 0.832311] CPU 3 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 [ 0.833133] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.834195] CPU3: Intel(R) Core(TM) i5 CPU 670 @ 3.47GHz stepping 02 [ 0.834202] Skipping synchronization checks as TSC is reliable. [ 0.834219] Brought up 4 CPUs [ 0.834220] Total of 4 processors activated (27818.30 BogoMIPS). [ 0.834268] CPU0 attaching sched-domain: [ 0.834270] domain 0: span 0,2 level SIBLING [ 0.834271] groups: 0 2 [ 0.834273] domain 1: span 0-3 level MC [ 0.834275] groups: 0,2 1,3 [ 0.834277] CPU1 attaching sched-domain: [ 0.834278] domain 0: span 1,3 level SIBLING [ 0.834280] groups: 1 3 [ 0.834281] domain 1: span 0-3 level MC [ 0.834282] groups: 1,3 0,2 [ 0.834285] CPU2 attaching sched-domain: [ 0.834286] domain 0: span 0,2 level SIBLING [ 0.834287] groups: 2 0 [ 0.834288] domain 1: span 0-3 level MC [ 0.834289] groups: 0,2 1,3 [ 0.834292] CPU3 attaching sched-domain: [ 0.834293] domain 0: span 1,3 level SIBLING [ 0.834294] groups: 3 1 [ 0.834295] domain 1: span 0-3 level MC [ 0.834296] groups: 1,3 0,2 [ 0.834511] Booting paravirtualized kernel on bare hardware [ 0.834620] regulator: core version 0.5 [ 0.834641] Time: 16:50:04 Date: 04/29/10 [ 0.834675] NET: Registered protocol family 16 [ 0.834749] ACPI: bus type pci registered [ 0.834798] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.834800] PCI: Not using MMCONFIG. [ 0.834801] PCI: Using configuration type 1 for base access [ 0.835249] bio: create slab at 0 [ 0.835893] ACPI: EC: Look up EC in DSDT [ 0.848724] ACPI: Interpreter enabled [ 0.848727] ACPI: (supports S0 S1 S3 S4 S5) [ 0.848740] ACPI: Using IOAPIC for interrupt routing [ 0.848779] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.851225] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.855017] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.861086] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 0.861087] ACPI: EC: driver started in poll mode [ 0.861275] ACPI: No dock devices found. [ 0.861530] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.861588] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.861589] pci 0000:00:01.0: PME# disabled [ 0.861615] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.861617] pci 0000:00:06.0: PME# disabled [ 0.861665] pci 0000:00:1a.0: reg 10 32bit mmio: [0xfb9fe000-0xfb9fe3ff] [ 0.861707] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.861710] pci 0000:00:1a.0: PME# disabled [ 0.861739] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfb9f8000-0xfb9fbfff] [ 0.861769] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.861771] pci 0000:00:1b.0: PME# disabled [ 0.861812] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.861814] pci 0000:00:1c.0: PME# disabled [ 0.861856] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.861858] pci 0000:00:1c.1: PME# disabled [ 0.861899] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.861902] pci 0000:00:1c.2: PME# disabled [ 0.861944] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.861947] pci 0000:00:1c.3: PME# disabled [ 0.861988] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.861991] pci 0000:00:1c.4: PME# disabled [ 0.862032] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.862034] pci 0000:00:1c.5: PME# disabled [ 0.862075] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.862078] pci 0000:00:1c.6: PME# disabled [ 0.862119] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.862121] pci 0000:00:1c.7: PME# disabled [ 0.862160] pci 0000:00:1d.0: reg 10 32bit mmio: [0xfb9fd000-0xfb9fd3ff] [ 0.862201] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.862204] pci 0000:00:1d.0: PME# disabled [ 0.862344] pci 0000:00:1f.2: reg 10 io port: [0xa880-0xa887] [ 0.862348] pci 0000:00:1f.2: reg 14 io port: [0xa800-0xa803] [ 0.862351] pci 0000:00:1f.2: reg 18 io port: [0xa480-0xa487] [ 0.862355] pci 0000:00:1f.2: reg 1c io port: [0xa400-0xa403] [ 0.862359] pci 0000:00:1f.2: reg 20 io port: [0xa080-0xa09f] [ 0.862363] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfb9f7000-0xfb9f77ff] [ 0.862385] pci 0000:00:1f.2: PME# supported from D3hot [ 0.862387] pci 0000:00:1f.2: PME# disabled [ 0.862407] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfb9fc000-0xfb9fc0ff] [ 0.862416] pci 0000:00:1f.3: reg 20 io port: [0xffe0-0xffff] [ 0.862449] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff] [ 0.862455] pci 0000:01:00.0: reg 18 64bit mmio: [0xfbac0000-0xfbadffff] [ 0.862459] pci 0000:01:00.0: reg 20 io port: [0xb000-0xb0ff] [ 0.862465] pci 0000:01:00.0: reg 30 32bit mmio: [0xfbaa0000-0xfbabffff] [ 0.862477] pci 0000:01:00.0: supports D1 D2 [ 0.862501] pci 0000:01:00.1: reg 10 64bit mmio: [0xfbafc000-0xfbafffff] [ 0.862525] pci 0000:01:00.1: supports D1 D2 [ 0.862559] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff] [ 0.862561] pci 0000:00:01.0: bridge 32bit mmio: [0xfba00000-0xfbafffff] [ 0.862563] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.862595] pci 0000:02:00.0: reg 10 64bit mmio: [0xfbbfe000-0xfbbfffff] [ 0.862634] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.862636] pci 0000:02:00.0: PME# disabled [ 0.862673] pci 0000:00:06.0: bridge 32bit mmio: [0xfbb00000-0xfbbfffff] [ 0.862866] pci 0000:05:00.0: reg 10 io port: [0xdc00-0xdc07] [ 0.862872] pci 0000:05:00.0: reg 14 io port: [0xd880-0xd883] [ 0.862878] pci 0000:05:00.0: reg 18 io port: [0xd800-0xd807] [ 0.862884] pci 0000:05:00.0: reg 1c io port: [0xd480-0xd483] [ 0.862890] pci 0000:05:00.0: reg 20 io port: [0xd400-0xd40f] [ 0.862896] pci 0000:05:00.0: reg 24 32bit mmio: [0xfbdff800-0xfbdfffff] [ 0.862903] pci 0000:05:00.0: reg 30 32bit mmio: [0xfbde0000-0xfbdeffff] [ 0.862930] pci 0000:05:00.0: PME# supported from D3hot [ 0.862933] pci 0000:05:00.0: PME# disabled [ 0.862969] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff] [ 0.862972] pci 0000:00:1c.5: bridge 32bit mmio: [0xfbd00000-0xfbdfffff] [ 0.863042] pci 0000:03:00.0: reg 10 io port: [0xc800-0xc8ff] [ 0.863059] pci 0000:03:00.0: reg 18 64bit mmio: [0xfafff000-0xfaffffff] [ 0.863070] pci 0000:03:00.0: reg 20 64bit mmio: [0xfaff8000-0xfaffbfff] [ 0.863076] pci 0000:03:00.0: reg 30 32bit mmio: [0xfbcf0000-0xfbcfffff] [ 0.863108] pci 0000:03:00.0: supports D1 D2 [ 0.863109] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.863113] pci 0000:03:00.0: PME# disabled [ 0.863157] pci 0000:00:1c.7: bridge io port: [0xc000-0xcfff] [ 0.863160] pci 0000:00:1c.7: bridge 32bit mmio: [0xfbc00000-0xfbcfffff] [ 0.863164] pci 0000:00:1c.7: bridge 64bit mmio pref: [0xfaf00000-0xfaffffff] [ 0.863190] pci 0000:0b:01.0: reg 10 32bit mmio: [0xfbef0000-0xfbefffff] [ 0.863255] pci 0000:0b:04.0: reg 10 32bit mmio: [0xfbeef800-0xfbeeffff] [ 0.863261] pci 0000:0b:04.0: reg 14 io port: [0xec00-0xec7f] [ 0.863295] pci 0000:0b:04.0: supports D2 [ 0.863296] pci 0000:0b:04.0: PME# supported from D2 D3hot D3cold [ 0.863299] pci 0000:0b:04.0: PME# disabled [ 0.863331] pci 0000:00:1e.0: transparent bridge [ 0.863333] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.863336] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff] [ 0.863369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.863484] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT] [ 0.863554] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR21._PRT] [ 0.863593] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR22._PRT] [ 0.863631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR23._PRT] [ 0.863671] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT] [ 0.863709] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR24._PRT] [ 0.863747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR25._PRT] [ 0.863785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT] [ 0.863830] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT] [ 0.863873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.863917] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.877605] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.877693] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.877779] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.877866] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.877953] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 0.878041] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.878128] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.878215] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.878315] SCSI subsystem initialized [ 0.878361] libata version 3.00 loaded. [ 0.878395] usbcore: registered new interface driver usbfs [ 0.878401] usbcore: registered new interface driver hub [ 0.878413] usbcore: registered new device driver usb [ 0.878475] ACPI: WMI: Mapper loaded [ 0.878476] PCI: Using ACPI for IRQ routing [ 0.902189] Bluetooth: Core ver 2.15 [ 0.902227] NET: Registered protocol family 31 [ 0.902229] Bluetooth: HCI device and connection manager initialized [ 0.902233] Bluetooth: HCI socket layer initialized [ 0.902236] NetLabel: Initializing [ 0.902238] NetLabel: domain hash size = 128 [ 0.902240] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.902258] NetLabel: unlabeled traffic allowed by default [ 0.902297] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 [ 0.902301] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.912180] hpet: hpet2 irq 24 for MSI [ 0.913527] hpet: hpet3 irq 25 for MSI [ 0.913964] hpet: hpet4 irq 26 for MSI [ 0.914028] hpet: hpet5 irq 27 for MSI [ 0.922163] Switched to high resolution mode on CPU 0 [ 0.923494] Switched to high resolution mode on CPU 1 [ 0.923930] Switched to high resolution mode on CPU 2 [ 0.923993] Switched to high resolution mode on CPU 3 [ 0.942132] pnp: PnP ACPI init [ 0.942148] ACPI: bus type pnp registered [ 0.944182] pnp: PnP ACPI: found 14 devices [ 0.944183] ACPI: ACPI bus type pnp unregistered [ 0.944190] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved [ 0.944192] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved [ 0.944193] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved [ 0.944195] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.944199] system 00:06: ioport range 0x290-0x29f has been reserved [ 0.944202] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.944203] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.944204] system 00:07: ioport range 0x500-0x57f has been reserved [ 0.944206] system 00:07: ioport range 0x600-0x607 has been reserved [ 0.944207] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.944209] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.944210] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved [ 0.944213] system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved [ 0.944216] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.944217] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.944220] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.944222] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.944224] system 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 0.944225] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.944227] system 00:0d: iomem range 0x100000-0xbfffffff could not be reserved [ 0.944228] system 00:0d: iomem range 0xfed90000-0xffffffff could not be reserved [ 0.948809] AppArmor: AppArmor Filesystem Enabled [ 0.948863] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.948865] pci 0000:00:01.0: IO window: 0xb000-0xbfff [ 0.948867] pci 0000:00:01.0: MEM window: 0xfba00000-0xfbafffff [ 0.948869] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.948871] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02 [ 0.948872] pci 0000:00:06.0: IO window: disabled [ 0.948874] pci 0000:00:06.0: MEM window: 0xfbb00000-0xfbbfffff [ 0.948876] pci 0000:00:06.0: PREFETCH window: disabled [ 0.948877] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0a [ 0.948878] pci 0000:00:1c.0: IO window: disabled [ 0.948881] pci 0000:00:1c.0: MEM window: disabled [ 0.948883] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.948886] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:09 [ 0.948887] pci 0000:00:1c.1: IO window: disabled [ 0.948890] pci 0000:00:1c.1: MEM window: disabled [ 0.948892] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.948894] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:08 [ 0.948895] pci 0000:00:1c.2: IO window: disabled [ 0.948898] pci 0000:00:1c.2: MEM window: disabled [ 0.948900] pci 0000:00:1c.2: PREFETCH window: disabled [ 0.948903] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:07 [ 0.948904] pci 0000:00:1c.3: IO window: disabled [ 0.948907] pci 0000:00:1c.3: MEM window: disabled [ 0.948909] pci 0000:00:1c.3: PREFETCH window: disabled [ 0.948911] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06 [ 0.948912] pci 0000:00:1c.4: IO window: disabled [ 0.948915] pci 0000:00:1c.4: MEM window: disabled [ 0.948917] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.948920] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05 [ 0.948922] pci 0000:00:1c.5: IO window: 0xd000-0xdfff [ 0.948925] pci 0000:00:1c.5: MEM window: 0xfbd00000-0xfbdfffff [ 0.948927] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.948930] pci 0000:00:1c.6: PCI bridge, secondary bus 0000:04 [ 0.948930] pci 0000:00:1c.6: IO window: disabled [ 0.948933] pci 0000:00:1c.6: MEM window: disabled [ 0.948936] pci 0000:00:1c.6: PREFETCH window: disabled [ 0.948938] pci 0000:00:1c.7: PCI bridge, secondary bus 0000:03 [ 0.948940] pci 0000:00:1c.7: IO window: 0xc000-0xcfff [ 0.948943] pci 0000:00:1c.7: MEM window: 0xfbc00000-0xfbcfffff [ 0.948946] pci 0000:00:1c.7: PREFETCH window: 0x000000faf00000-0x000000faffffff [ 0.948950] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0b [ 0.948951] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.948955] pci 0000:00:1e.0: MEM window: 0xfbe00000-0xfbefffff [ 0.948957] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.948964] alloc irq_desc for 16 on node 0 [ 0.948965] alloc kstat_irqs on node 0 [ 0.948968] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.948971] pci 0000:00:01.0: setting latency timer to 64 [ 0.948973] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.948975] pci 0000:00:06.0: setting latency timer to 64 [ 0.948979] alloc irq_desc for 17 on node 0 [ 0.948980] alloc kstat_irqs on node 0 [ 0.948982] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.948984] pci 0000:00:1c.0: setting latency timer to 64 [ 0.948988] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.948991] pci 0000:00:1c.1: setting latency timer to 64 [ 0.948995] alloc irq_desc for 18 on node 0 [ 0.948995] alloc kstat_irqs on node 0 [ 0.948997] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.949000] pci 0000:00:1c.2: setting latency timer to 64 [ 0.949004] alloc irq_desc for 19 on node 0 [ 0.949005] alloc kstat_irqs on node 0 [ 0.949007] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.949009] pci 0000:00:1c.3: setting latency timer to 64 [ 0.949013] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.949016] pci 0000:00:1c.4: setting latency timer to 64 [ 0.949020] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.949022] pci 0000:00:1c.5: setting latency timer to 64 [ 0.949026] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.949029] pci 0000:00:1c.6: setting latency timer to 64 [ 0.949033] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.949036] pci 0000:00:1c.7: setting latency timer to 64 [ 0.949039] pci 0000:00:1e.0: setting latency timer to 64 [ 0.949042] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.949043] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.949045] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.949046] pci_bus 0000:01: resource 1 mem: [0xfba00000-0xfbafffff] [ 0.949047] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.949048] pci_bus 0000:02: resource 1 mem: [0xfbb00000-0xfbbfffff] [ 0.949050] pci_bus 0000:05: resource 0 io: [0xd000-0xdfff] [ 0.949051] pci_bus 0000:05: resource 1 mem: [0xfbd00000-0xfbdfffff] [ 0.949052] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.949054] pci_bus 0000:03: resource 1 mem: [0xfbc00000-0xfbcfffff] [ 0.949055] pci_bus 0000:03: resource 2 pref mem [0xfaf00000-0xfaffffff] [ 0.949056] pci_bus 0000:0b: resource 0 io: [0xe000-0xefff] [ 0.949057] pci_bus 0000:0b: resource 1 mem: [0xfbe00000-0xfbefffff] [ 0.949059] pci_bus 0000:0b: resource 3 io: [0x00-0xffff] [ 0.949060] pci_bus 0000:0b: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.949082] NET: Registered protocol family 2 [ 0.949232] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.949964] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.951752] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.951968] TCP: Hash tables configured (established 524288 bind 65536) [ 0.951969] TCP reno registered [ 0.952064] NET: Registered protocol family 1 [ 0.952119] Trying to unpack rootfs image as initramfs... [ 1.051295] Freeing initrd memory: 7398k freed [ 1.052616] Scanning for low memory corruption every 60 seconds [ 1.052694] audit: initializing netlink socket (disabled) [ 1.052705] type=2000 audit(1272559803.820:1): initialized [ 1.058901] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.059668] VFS: Disk quotas dquot_6.5.2 [ 1.059700] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.060032] fuse init (API version 7.12) [ 1.060077] msgmni has been set to 15988 [ 1.060204] alg: No test for stdrng (krng) [ 1.060211] io scheduler noop registered [ 1.060212] io scheduler anticipatory registered [ 1.060214] io scheduler deadline registered [ 1.060238] io scheduler cfq registered (default) [ 1.060291] pci 0000:01:00.0: Boot video device [ 1.060379] alloc irq_desc for 29 on node 0 [ 1.060381] alloc kstat_irqs on node 0 [ 1.060386] pcieport-driver 0000:00:01.0: irq 29 for MSI/MSI-X [ 1.060390] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 1.060452] alloc irq_desc for 30 on node 0 [ 1.060453] alloc kstat_irqs on node 0 [ 1.060456] pcieport-driver 0000:00:06.0: irq 30 for MSI/MSI-X [ 1.060459] pcieport-driver 0000:00:06.0: setting latency timer to 64 [ 1.060528] alloc irq_desc for 31 on node 0 [ 1.060529] alloc kstat_irqs on node 0 [ 1.060534] pcieport-driver 0000:00:1c.0: irq 31 for MSI/MSI-X [ 1.060539] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 1.060618] alloc irq_desc for 32 on node 0 [ 1.060619] alloc kstat_irqs on node 0 [ 1.060624] pcieport-driver 0000:00:1c.1: irq 32 for MSI/MSI-X [ 1.060629] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 1.060710] alloc irq_desc for 33 on node 0 [ 1.060711] alloc kstat_irqs on node 0 [ 1.060715] pcieport-driver 0000:00:1c.2: irq 33 for MSI/MSI-X [ 1.060721] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 1.060800] alloc irq_desc for 34 on node 0 [ 1.060801] alloc kstat_irqs on node 0 [ 1.060806] pcieport-driver 0000:00:1c.3: irq 34 for MSI/MSI-X [ 1.060811] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 1.060893] alloc irq_desc for 35 on node 0 [ 1.060894] alloc kstat_irqs on node 0 [ 1.060899] pcieport-driver 0000:00:1c.4: irq 35 for MSI/MSI-X [ 1.060904] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 1.060978] alloc irq_desc for 36 on node 0 [ 1.060979] alloc kstat_irqs on node 0 [ 1.060984] pcieport-driver 0000:00:1c.5: irq 36 for MSI/MSI-X [ 1.060989] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 1.061064] alloc irq_desc for 37 on node 0 [ 1.061065] alloc kstat_irqs on node 0 [ 1.061070] pcieport-driver 0000:00:1c.6: irq 37 for MSI/MSI-X [ 1.061075] pcieport-driver 0000:00:1c.6: setting latency timer to 64 [ 1.061150] alloc irq_desc for 38 on node 0 [ 1.061151] alloc kstat_irqs on node 0 [ 1.061156] pcieport-driver 0000:00:1c.7: irq 38 for MSI/MSI-X [ 1.061161] pcieport-driver 0000:00:1c.7: setting latency timer to 64 [ 1.061208] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.061225] Firmware did not grant requested _OSC control [ 1.061237] Firmware did not grant requested _OSC control [ 1.061245] Firmware did not grant requested _OSC control [ 1.061253] Firmware did not grant requested _OSC control [ 1.061268] Firmware did not grant requested _OSC control [ 1.061276] Firmware did not grant requested _OSC control [ 1.061283] Firmware did not grant requested _OSC control [ 1.061290] Firmware did not grant requested _OSC control [ 1.061298] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.061366] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.061368] ACPI: Power Button [PWRF] [ 1.061399] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.061401] ACPI: Power Button [PWRB] [ 1.062410] ACPI: SSDT 00000000bf7880c0 01658 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 1.062754] ACPI: SSDT 00000000bf789720 004D5 (v01 PmRef P001Cst 00003001 INTL 20060113) [ 1.063113] Monitor-Mwait will be used to enter C-1 state [ 1.063125] Monitor-Mwait will be used to enter C-2 state [ 1.063136] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 1.063149] processor LNXCPU:00: registered as cooling_device0 [ 1.063374] ACPI: CPU1 (power states: C1[C1] C2[C2]) [ 1.063383] processor LNXCPU:01: registered as cooling_device1 [ 1.063608] ACPI: CPU2 (power states: C1[C1] C2[C2]) [ 1.063617] processor LNXCPU:02: registered as cooling_device2 [ 1.063836] ACPI: CPU3 (power states: C1[C1] C2[C2]) [ 1.063845] processor LNXCPU:03: registered as cooling_device3 [ 1.066357] Linux agpgart interface v0.103 [ 1.066362] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.066985] brd: module loaded [ 1.067206] loop: module loaded [ 1.067243] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.067301] ahci 0000:00:1f.2: version 3.0 [ 1.067311] alloc irq_desc for 21 on node 0 [ 1.067312] alloc kstat_irqs on node 0 [ 1.067315] ahci 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21 [ 1.067334] alloc irq_desc for 39 on node 0 [ 1.067335] alloc kstat_irqs on node 0 [ 1.067340] ahci 0000:00:1f.2: irq 39 for MSI/MSI-X [ 1.067363] ahci: SSS flag set, parallel bus scan disabled [ 1.081902] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.081908] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems [ 1.081914] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.181756] scsi0 : ahci [ 1.181823] scsi1 : ahci [ 1.181847] scsi2 : ahci [ 1.181873] scsi3 : ahci [ 1.181897] scsi4 : ahci [ 1.181923] scsi5 : ahci [ 1.181992] ata1: SATA max UDMA/133 abar m2048@0xfb9f7000 port 0xfb9f7100 irq 39 [ 1.181994] ata2: SATA max UDMA/133 abar m2048@0xfb9f7000 port 0xfb9f7180 irq 39 [ 1.181996] ata3: SATA max UDMA/133 abar m2048@0xfb9f7000 port 0xfb9f7200 irq 39 [ 1.181998] ata4: SATA max UDMA/133 abar m2048@0xfb9f7000 port 0xfb9f7280 irq 39 [ 1.181999] ata5: SATA max UDMA/133 abar m2048@0xfb9f7000 port 0xfb9f7300 irq 39 [ 1.182001] ata6: SATA max UDMA/133 abar m2048@0xfb9f7000 port 0xfb9f7380 irq 39 [ 1.182041] ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.182073] alloc irq_desc for 40 on node 0 [ 1.182074] alloc kstat_irqs on node 0 [ 1.182081] ahci 0000:05:00.0: irq 40 for MSI/MSI-X [ 1.182122] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.182124] ahci 0000:05:00.0: flags: 64bit ncq sntf led only pmp pio slum part [ 1.182128] ahci 0000:05:00.0: setting latency timer to 64 [ 1.182207] scsi6 : ahci [ 1.182238] scsi7 : ahci [ 1.182259] ata7: SATA max UDMA/133 abar m2048@0xfbdff800 port 0xfbdff900 irq 40 [ 1.182261] ata8: SATA max UDMA/133 abar m2048@0xfbdff800 port 0xfbdff980 irq 40 [ 1.182667] Fixed MDIO Bus: probed [ 1.182685] PPP generic driver version 2.4.2 [ 1.182729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.182761] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.182772] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.182774] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.182792] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.186686] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.186690] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 1.186699] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfb9fe000 [ 1.201668] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.201757] usb usb1: configuration #1 chosen from 1 choice [ 1.201772] hub 1-0:1.0: USB hub found [ 1.201776] hub 1-0:1.0: 2 ports detected [ 1.201819] alloc irq_desc for 23 on node 0 [ 1.201820] alloc kstat_irqs on node 0 [ 1.201823] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.201830] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.201832] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.201848] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.205730] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.205734] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 1.205742] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfb9fd000 [ 1.221629] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.221708] usb usb2: configuration #1 chosen from 1 choice [ 1.221727] hub 2-0:1.0: USB hub found [ 1.221730] hub 2-0:1.0: 2 ports detected [ 1.221758] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.221766] uhci_hcd: USB Universal Host Controller Interface driver [ 1.221819] PNP: No PS/2 controller found. Probing ports directly. [ 1.224479] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.224486] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.224530] mice: PS/2 mouse device common for all mice [ 1.224578] rtc_cmos 00:03: RTC can wake from S4 [ 1.224597] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.224619] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.224687] device-mapper: uevent: version 1.0.3 [ 1.224731] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.224783] device-mapper: multipath: version 1.1.0 loaded [ 1.224785] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.224942] cpuidle: using governor ladder [ 1.225022] cpuidle: using governor menu [ 1.225270] TCP cubic registered [ 1.225341] NET: Registered protocol family 10 [ 1.225623] lo: Disabled Privacy Extensions [ 1.225780] NET: Registered protocol family 17 [ 1.225789] Bluetooth: L2CAP ver 2.13 [ 1.225790] Bluetooth: L2CAP socket layer initialized [ 1.225792] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.225793] Bluetooth: SCO socket layer initialized [ 1.225807] Bluetooth: RFCOMM TTY layer initialized [ 1.225810] Bluetooth: RFCOMM socket layer initialized [ 1.225811] Bluetooth: RFCOMM ver 1.11 [ 1.227065] PM: Resume from disk failed. [ 1.227073] registered taskstats version 1 [ 1.227172] Magic number: 6:651:844 [ 1.227288] rtc_cmos 00:03: setting system clock to 2010-04-29 16:50:04 UTC (1272559804) [ 1.227292] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.227295] EDD information not available. [ 1.521149] ata8: SATA link down (SStatus 0 SControl 370) [ 1.521182] ata7: SATA link down (SStatus 0 SControl 370) [ 1.521211] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.671599] usb 1-1: configuration #1 chosen from 1 choice [ 1.671842] hub 1-1:1.0: USB hub found [ 1.672030] hub 1-1:1.0: 6 ports detected [ 1.710799] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.712655] ata1.00: ATA-8: ST9160314AS, 0001SDM1, max UDMA/133 [ 1.712659] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.714964] ata1.00: configured for UDMA/133 [ 1.731081] scsi 0:0:0:0: Direct-Access ATA ST9160314AS 0001 PQ: 0 ANSI: 5 [ 1.731141] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.731211] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.731236] sd 0:0:0:0: [sda] Write Protect is off [ 1.731238] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.731247] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.731315] sda: sda1 sda2 sda3 < [ 1.790663] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.794768] sda5 > sda4 [ 1.795051] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.941422] usb 2-1: configuration #1 chosen from 1 choice [ 1.941645] hub 2-1:1.0: USB hub found [ 1.941749] hub 2-1:1.0: 8 ports detected [ 2.020365] usb 1-1.4: new high speed USB device using ehci_hcd and address 3 [ 2.142494] usb 1-1.4: configuration #1 chosen from 1 choice [ 2.220069] usb 2-1.1: new high speed USB device using ehci_hcd and address 3 [ 2.330200] usb 2-1.1: configuration #1 chosen from 1 choice [ 2.330417] hub 2-1.1:1.0: USB hub found [ 2.330530] hub 2-1.1:1.0: 7 ports detected [ 2.410009] usb 2-1.5: new full speed USB device using ehci_hcd and address 4 [ 2.521158] usb 2-1.5: configuration #1 chosen from 1 choice [ 2.609329] usb 2-1.1.5: new low speed USB device using ehci_hcd and address 5 [ 2.659117] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.663260] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100, ATAPI AN [ 2.667608] ata2.00: configured for UDMA/100 [ 2.692463] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL02 PQ: 0 ANSI: 5 [ 2.714163] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.714168] Uniform CD-ROM driver Revision: 3.20 [ 2.714271] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.714310] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.726201] usb 2-1.1.5: configuration #1 chosen from 1 choice [ 3.058401] ata3: SATA link down (SStatus 0 SControl 300) [ 3.427774] ata4: SATA link down (SStatus 0 SControl 300) [ 3.798028] ata5: SATA link down (SStatus 0 SControl 300) [ 4.167371] ata6: SATA link down (SStatus 0 SControl 300) [ 4.186480] Freeing unused kernel memory: 664k freed [ 4.186586] Write protecting the kernel read-only data: 7596k [ 4.219503] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 4.219525] r8169 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.219571] r8169 0000:03:00.0: setting latency timer to 64 [ 4.219610] alloc irq_desc for 41 on node 0 [ 4.219612] alloc kstat_irqs on node 0 [ 4.219625] r8169 0000:03:00.0: irq 41 for MSI/MSI-X [ 4.220064] eth0: RTL8168d/8111d at 0xffffc90000c72000, 48:5b:39:23:eb:90, XID 283000c0 IRQ 41 [ 4.241432] usbcore: registered new interface driver hiddev [ 4.242324] generic-usb 0003:18EA:0004.0001: hiddev96,hidraw0: USB HID v1.01 Device [Matrox TripleHead2Go] on usb-0000:00:1d.0-1.5/input0 [ 4.242368] usbcore: registered new interface driver usbhid [ 4.242370] usbhid: v2.6:USB HID core driver [ 4.243932] Initializing USB Mass Storage driver... [ 4.243965] ohci1394 0000:0b:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 4.243984] scsi8 : SCSI emulation for USB Mass Storage devices [ 4.244059] usbcore: registered new interface driver usb-storage [ 4.244061] USB Mass Storage support registered. [ 4.244104] usb-storage: device found at 3 [ 4.244105] usb-storage: waiting for device to settle before scanning [ 4.247930] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.5/2-1.1.5:1.0/input/input3 [ 4.247970] logitech 0003:046D:C517.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.1.5/input0 [ 4.253135] logitech 0003:046D:C517.0003: fixing up Logitech keyboard report descriptor [ 4.253457] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.5/2-1.1.5:1.1/input/input4 [ 4.253504] logitech 0003:046D:C517.0003: input,hiddev97,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1.5/input1 [ 4.298254] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fbeef800-fbeeffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 4.804454] EXT4-fs (sda4): barriers enabled [ 5.002190] kjournald2 starting: pid 329, dev sda4:8, commit interval 5 seconds [ 5.002423] EXT4-fs (sda4): delayed allocation enabled [ 5.002428] EXT4-fs: file extents enabled [ 5.002922] EXT4-fs: mballoc enabled [ 5.002930] EXT4-fs (sda4): mounted filesystem with ordered data mode [ 5.614639] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0000d202c0] [ 9.228415] usb-storage: device scan complete [ 9.229150] scsi 8:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 [ 9.229790] scsi 8:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0 [ 9.230536] scsi 8:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0 [ 9.231285] scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 [ 9.232198] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 9.232286] sd 8:0:0:1: Attached scsi generic sg3 type 0 [ 9.232378] sd 8:0:0:2: Attached scsi generic sg4 type 0 [ 9.232473] sd 8:0:0:3: Attached scsi generic sg5 type 0 [ 9.236025] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 9.236712] sd 8:0:0:1: [sdc] Attached SCSI removable disk [ 9.237352] sd 8:0:0:2: [sdd] Attached SCSI removable disk [ 9.238099] sd 8:0:0:3: [sde] Attached SCSI removable disk [ 11.413717] usb 2-1.1.4: new full speed USB device using ehci_hcd and address 6 [ 11.569674] usb 2-1.1.4: configuration #1 chosen from 1 choice [ 20.403313] udev: starting version 151 [ 20.470330] type=1505 audit(1272552623.774:2): operation="profile_load" pid=2941 name=/sbin/dhclient3 [ 20.470655] type=1505 audit(1272552623.774:3): operation="profile_load" pid=2941 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 20.470830] type=1505 audit(1272552623.774:4): operation="profile_load" pid=2941 name=/usr/lib/connman/scripts/dhclient-script [ 20.511782] Adding 7815612k swap on /dev/sda5. Priority:-1 extents:1 across:7815612k [ 20.770807] usbcore: registered new interface driver usbserial [ 20.770815] USB Serial support registered for generic [ 20.770830] usbcore: registered new interface driver usbserial_generic [ 20.770831] usbserial: USB Serial Driver core [ 20.791211] USB Serial support registered for Reiner SCT Cyberjack USB card reader [ 20.791222] cyberjack 2-1.1.4:1.0: Reiner SCT Cyberjack USB card reader converter detected [ 20.791282] usb 2-1.1.4: Reiner SCT Cyberjack USB card reader converter now attached to ttyUSB0 [ 20.791289] usbcore: registered new interface driver cyberjack [ 20.791290] cyberjack: v1.01 Matthias Bruestle [ 20.791291] cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver [ 20.798514] lp: driver loaded but no devices found [ 20.862733] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.862800] xhci_hcd 0000:02:00.0: setting latency timer to 64 [ 20.862805] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 20.862877] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3 [ 20.862970] xhci_hcd 0000:02:00.0: irq 16, io mem 0xfbbfe000 [ 20.862994] usb usb3: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor [ 20.863030] usb usb3: configuration #1 chosen from 1 choice [ 20.863032] xHCI xhci_add_endpoint called for root hub [ 20.863033] xHCI xhci_check_bandwidth called for root hub [ 20.863094] hub 3-0:1.0: USB hub found [ 20.863097] hub 3-0:1.0: 4 ports detected [ 21.035092] rt2860sta: module is from the staging directory, the quality is unknown, you have been warned. [ 21.036918] rt2860 0000:0b:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 21.037001] [ 21.037001] [ 21.037002] === pAd = ffffc90012172000, size = 627064 === [ 21.037002] [ 21.037003] <-- RTMPAllocAdapterBlock, Status=0 [ 21.345542] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 21.345545] Disabling lock debugging due to kernel taint [ 21.353126] [fglrx] Maximum main memory to use for locked dma buffers: 7762 MBytes. [ 21.353158] [fglrx] vendor: 1002 device: 68f9 count: 1 [ 21.353316] [fglrx] ioport: bar 4, base 0xb000, size: 0x100 [ 21.353327] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 21.353330] pci 0000:01:00.0: setting latency timer to 64 [ 21.353486] [fglrx] Kernel PAT support is enabled [ 21.353501] [fglrx] module loaded - fglrx 8.71.4 [Mar 2 2010] with 1 minors [ 21.717353] EXT4-fs (sda4): internal journal on sda4:8 [ 21.895193] alloc irq_desc for 22 on node 0 [ 21.895196] alloc kstat_irqs on node 0 [ 21.895202] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 21.895248] alloc irq_desc for 42 on node 0 [ 21.895250] alloc kstat_irqs on node 0 [ 21.895261] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X [ 21.895282] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 22.058530] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 22.058610] alloc irq_desc for 43 on node 0 [ 22.058612] alloc kstat_irqs on node 0 [ 22.058619] HDA Intel 0000:01:00.1: irq 43 for MSI/MSI-X [ 22.058638] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 22.061077] type=1505 audit(1272552625.364:5): operation="profile_replace" pid=3306 name=/sbin/dhclient3 [ 22.061378] type=1505 audit(1272552625.364:6): operation="profile_replace" pid=3306 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 22.061559] type=1505 audit(1272552625.364:7): operation="profile_replace" pid=3306 name=/usr/lib/connman/scripts/dhclient-script [ 22.063035] type=1505 audit(1272552625.364:8): operation="profile_load" pid=3308 name=/usr/lib/cups/backend/cups-pdf [ 22.063388] type=1505 audit(1272552625.364:9): operation="profile_load" pid=3308 name=/usr/sbin/cupsd [ 22.064520] type=1505 audit(1272552625.364:10): operation="profile_load" pid=3309 name=/usr/sbin/mysqld-akonadi [ 22.065516] type=1505 audit(1272552625.374:11): operation="profile_load" pid=3310 name=/usr/sbin/tcpdump [ 22.077038] r8169: eth0: link down [ 22.077522] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.118929] RX DESC ffff880037869000 size = 2048 [ 22.119037] <-- RTMPAllocTxRxRingMemory, Status=0 [ 22.122150] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat [ 22.122184] 1. Phy Mode = 0 [ 22.122212] 2. Phy Mode = 0 [ 22.135073] RTMPSetPhyMode: channel is out of range, use first channel=1 [ 22.138989] 3. Phy Mode = 0 [ 22.142358] MCS Set = 00 00 00 00 00 [ 22.143955] <==== RTMPInitialize, Status=0 [ 22.144053] 0x1300 = 00073200