[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-21-generic (buildd@yellow) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #59-Ubuntu SMP Wed Mar 24 07:28:27 UTC 2010 (Ubuntu 2.6.31-21.59-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-21-generic root=UUID=1cc26d9c-6064-4930-96a1-5017bc2ee13d ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000008fec0000 (usable) [ 0.000000] BIOS-e820: 000000008fec0000 - 000000008fecf000 (ACPI data) [ 0.000000] BIOS-e820: 000000008fecf000 - 000000008fee5000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000008fee5000 - 00000000a0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000160000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x160000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-DBFFF uncachable [ 0.000000] DC000-EFFFF write-through [ 0.000000] F0000-FFFFF write-back [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0A0000000 mask FE0000000 uncachable [ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 2 base 000000000 mask F00000000 write-back [ 0.000000] 3 base 100000000 mask FC0000000 write-back [ 0.000000] 4 base 140000000 mask FE0000000 write-back [ 0.000000] 5 base 09FF00000 mask FFFF00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 000000009ff00000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x8fec0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009dc00 (usable) [ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000008fec0000 (usable) [ 0.000000] modified: 000000008fec0000 - 000000008fecf000 (ACPI data) [ 0.000000] modified: 000000008fecf000 - 000000008fee5000 (ACPI NVS) [ 0.000000] modified: 000000008fee5000 - 00000000a0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000160000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000008fec0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 008fe00000 page 2M [ 0.000000] 008fe00000 - 008fec0000 page 4k [ 0.000000] kernel direct mapping tables up to 8fec0000 @ 8000-d000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000160000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0160000000 page 2M [ 0.000000] kernel direct mapping tables up to 160000000 @ b000-12000 [ 0.000000] RAMDISK: 37831000 - 37fefc55 [ 0.000000] ACPI: RSDP 00000000000f7b20 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 000000008fec37f6 000A4 (v01 DELL QA09 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 000000008fecec04 000F4 (v03 NVIDIA MCP79 06040000 PTL_ 000F4240) [ 0.000000] ACPI: DSDT 000000008fec5388 09808 (v01 NVIDIA MCP79 06040000 MSFT 03000001) [ 0.000000] ACPI: FACS 000000008fee4fc0 00040 [ 0.000000] ACPI: MCFG 000000008fececf8 0003C (v01 PTLTD MCFG 06040000 LTP 00000000) [ 0.000000] ACPI: HPET 000000008feced34 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 000000008feced6c 00072 (v01 PTLTD APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 000000008fecedde 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 000000008fecee06 00176 (v01 DELL QA09 06040000 LTP 00000000) [ 0.000000] ACPI: OSFR 000000008fecef7c 00084 (v01 DELL DELL 06040000 ASL 00000061) [ 0.000000] ACPI: SSDT 000000008fec5129 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 000000008fec5083 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 000000008fec4fdd 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 000000008fec4f37 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 000000008fec4e91 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 000000008fec4deb 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 000000008fec4d45 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 000000008fec4c9f 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228) [ 0.000000] ACPI: SSDT 000000008fec389a 01405 (v01 PmRef CpuPm 00003000 INTL 20050228) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000160000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000160000000 [ 0.000000] NODE_DATA [000000000000d000 - 0000000000011fff] [ 0.000000] bootmap [0000000000012000 - 000000000003dfff] pages 2c [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0160000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019ebe8c] TEXT DATA BSS ==> [0001000000 - 00019ebe8c] [ 0.000000] #3 [0037831000 - 0037fefc55] RAMDISK ==> [0037831000 - 0037fefc55] [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #5 [00019ec000 - 00019ec16c] BRK ==> [00019ec000 - 00019ec16c] [ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #7 [000000b000 - 000000d000] PGTABLE ==> [000000b000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000f7b50] f7b50 [ 0.000000] [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880028600000-ffff88002bbfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00160000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0008fec0 [ 0.000000] 0: 0x00100000 -> 0x00160000 [ 0.000000] On node 0 totalpages: 982616 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 106 pages reserved [ 0.000000] DMA zone: 3830 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 571128 pages, LIFO batch:31 [ 0.000000] Normal zone: 5376 pages used for memmap [ 0.000000] Normal zone: 387840 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10dea301 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000008fec0000 - 000000008fecf000 [ 0.000000] PM: Registered nosave memory: 000000008fecf000 - 000000008fee5000 [ 0.000000] PM: Registered nosave memory: 000000008fee5000 - 00000000a0000000 [ 0.000000] PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000 [ 0.000000] PM: Registered nosave memory: 00000000fff80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at a0000000 (gap: a0000000:40000000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff880028028000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 962798 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-21-generic root=UUID=1cc26d9c-6064-4930-96a1-5017bc2ee13d ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 3790604k/5767168k available (5332k kernel code, 1836704k absent, 139860k reserved, 3018k data, 668k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2666.590 MHz processor. [ 0.000014] spurious 8259A interrupt: IRQ7. [ 0.001441] Console: colour VGA+ 80x25 [ 0.001443] console [tty0] enabled [ 0.010000] allocated 39321600 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010000] hpet clockevent registered [ 0.010000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.18 BogoMIPS (lpj=26665900) [ 0.010000] Security Framework initialized [ 0.010000] AppArmor: AppArmor initialized [ 0.010000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010000] Mount-cache hash table entries: 256 [ 0.010000] Initializing cgroup subsys ns [ 0.010000] Initializing cgroup subsys cpuacct [ 0.010000] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys devices [ 0.010000] Initializing cgroup subsys freezer [ 0.010000] Initializing cgroup subsys net_cls [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 6144K [ 0.010000] CPU 0/0x0 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] CPU0: Thermal monitoring handled by SMI [ 0.010000] using mwait in idle threads. [ 0.010000] Performance Counters: Core2 events, Intel PMU driver. [ 0.010000] ... version: 2 [ 0.010000] ... bit width: 40 [ 0.010000] ... generic counters: 2 [ 0.010000] ... value mask: 000000ffffffffff [ 0.010000] ... max period: 000000007fffffff [ 0.010000] ... fixed-purpose counters: 3 [ 0.010000] ... counter mask: 0000000700000003 [ 0.010000] ACPI: Core revision 20090521 [ 0.020050] Setting APIC routing to flat [ 0.020439] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.126315] CPU0: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz stepping 0a [ 0.130000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 5333.24 BogoMIPS (lpj=26666228) [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 6144K [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] CPU1: Thermal monitoring handled by SMI [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.281564] CPU1: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz stepping 0a [ 0.281575] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.290020] Brought up 2 CPUs [ 0.290023] Total of 2 processors activated (10666.42 BogoMIPS). [ 0.290088] CPU0 attaching sched-domain: [ 0.290090] domain 0: span 0-1 level MC [ 0.290092] groups: 0 1 [ 0.290096] CPU1 attaching sched-domain: [ 0.290097] domain 0: span 0-1 level MC [ 0.290099] groups: 1 0 [ 0.290157] Booting paravirtualized kernel on bare hardware [ 0.290157] regulator: core version 0.5 [ 0.290157] Time: 13:16:10 Date: 05/04/10 [ 0.290157] NET: Registered protocol family 16 [ 0.290196] ACPI: bus type pci registered [ 0.290258] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 7 [ 0.290261] PCI: MCFG area at e0000000 reserved in E820 [ 0.290456] PCI: Using MMCONFIG at e0000000 - e07fffff [ 0.290458] PCI: Using configuration type 1 for base access [ 0.291082] bio: create slab at 0 [ 0.291082] ACPI: EC: Look up EC in DSDT [ 0.295246] ACPI: Interpreter enabled [ 0.295249] ACPI: (supports S0 S3 S4 S5) [ 0.295263] ACPI: Using IOAPIC for interrupt routing [ 0.301239] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.330401] ACPI: EC: GPE = 0x47, I/O: command/status = 0x66, data = 0x62 [ 0.330403] ACPI: EC: driver started in interrupt mode [ 0.330708] ACPI: No dock devices found. [ 0.330925] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.331148] pci 0000:00:03.0: reg 10 io port: [0x1c00-0x1cff] [ 0.331240] pci 0000:00:03.2: reg 10 io port: [0x3080-0x30bf] [ 0.331252] pci 0000:00:03.2: reg 20 io port: [0x3040-0x307f] [ 0.331256] pci 0000:00:03.2: reg 24 io port: [0x2000-0x203f] [ 0.331277] pci 0000:00:03.2: PME# supported from D3hot D3cold [ 0.331282] pci 0000:00:03.2: PME# disabled [ 0.331404] pci 0000:00:03.5: reg 10 32bit mmio: [0xf0600000-0xf067ffff] [ 0.331489] pci 0000:00:04.0: reg 10 32bit mmio: [0xf0886000-0xf0886fff] [ 0.331516] pci 0000:00:04.0: supports D1 D2 [ 0.331517] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.331520] pci 0000:00:04.0: PME# disabled [ 0.331545] pci 0000:00:04.1: reg 10 32bit mmio: [0xf0889000-0xf08890ff] [ 0.331577] pci 0000:00:04.1: supports D1 D2 [ 0.331578] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.331581] pci 0000:00:04.1: PME# disabled [ 0.331610] pci 0000:00:06.0: reg 10 32bit mmio: [0xf0887000-0xf0887fff] [ 0.331636] pci 0000:00:06.0: supports D1 D2 [ 0.331638] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.331641] pci 0000:00:06.0: PME# disabled [ 0.331665] pci 0000:00:06.1: reg 10 32bit mmio: [0xf0889400-0xf08894ff] [ 0.331697] pci 0000:00:06.1: supports D1 D2 [ 0.331698] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.331701] pci 0000:00:06.1: PME# disabled [ 0.331730] pci 0000:00:08.0: reg 10 32bit mmio: [0xf0880000-0xf0883fff] [ 0.331757] pci 0000:00:08.0: PME# supported from D3hot D3cold [ 0.331760] pci 0000:00:08.0: PME# disabled [ 0.331810] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf0888000-0xf0888fff] [ 0.331814] pci 0000:00:0a.0: reg 14 io port: [0x30d0-0x30d7] [ 0.331817] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf0889c00-0xf0889cff] [ 0.331821] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf0889800-0xf088980f] [ 0.331840] pci 0000:00:0a.0: supports D1 D2 [ 0.331842] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.331846] pci 0000:00:0a.0: PME# disabled [ 0.331869] pci 0000:00:0b.0: reg 10 io port: [0x30e8-0x30ef] [ 0.331872] pci 0000:00:0b.0: reg 14 io port: [0x30dc-0x30df] [ 0.331876] pci 0000:00:0b.0: reg 18 io port: [0x30e0-0x30e7] [ 0.331880] pci 0000:00:0b.0: reg 1c io port: [0x30d8-0x30db] [ 0.331883] pci 0000:00:0b.0: reg 20 io port: [0x30c0-0x30cf] [ 0.331887] pci 0000:00:0b.0: reg 24 32bit mmio: [0xf0884000-0xf0885fff] [ 0.332087] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.332094] pci 0000:00:0c.0: PME# disabled [ 0.332160] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.332163] pci 0000:00:10.0: PME# disabled [ 0.332541] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.332548] pci 0000:00:15.0: PME# disabled [ 0.332762] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.332769] pci 0000:00:16.0: PME# disabled [ 0.332983] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.332990] pci 0000:00:17.0: PME# disabled [ 0.333204] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.333211] pci 0000:00:18.0: PME# disabled [ 0.333285] pci 0000:01:07.0: reg 10 32bit mmio: [0xf0500000-0xf05007ff] [ 0.333321] pci 0000:01:07.0: supports D1 D2 [ 0.333322] pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.333326] pci 0000:01:07.0: PME# disabled [ 0.333352] pci 0000:01:07.1: reg 10 32bit mmio: [0xf0500800-0xf05008ff] [ 0.333388] pci 0000:01:07.1: supports D1 D2 [ 0.333389] pci 0000:01:07.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.333393] pci 0000:01:07.1: PME# disabled [ 0.333418] pci 0000:01:07.2: reg 10 32bit mmio: [0xf0500c00-0xf0500cff] [ 0.333454] pci 0000:01:07.2: supports D1 D2 [ 0.333456] pci 0000:01:07.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.333459] pci 0000:01:07.2: PME# disabled [ 0.333485] pci 0000:01:07.3: reg 10 32bit mmio: [0xf0501000-0xf05010ff] [ 0.333521] pci 0000:01:07.3: supports D1 D2 [ 0.333522] pci 0000:01:07.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.333525] pci 0000:01:07.3: PME# disabled [ 0.333551] pci 0000:01:07.4: reg 10 32bit mmio: [0xf0501400-0xf05014ff] [ 0.333587] pci 0000:01:07.4: supports D1 D2 [ 0.333589] pci 0000:01:07.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.333592] pci 0000:01:07.4: PME# disabled [ 0.333626] pci 0000:00:09.0: transparent bridge [ 0.333630] pci 0000:00:09.0: bridge 32bit mmio: [0xf0500000-0xf05fffff] [ 0.333687] pci 0000:02:00.0: reg 10 32bit mmio: [0xae000000-0xaeffffff] [ 0.333703] pci 0000:02:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.333719] pci 0000:02:00.0: reg 1c 64bit mmio: [0xac000000-0xadffffff] [ 0.333730] pci 0000:02:00.0: reg 24 io port: [0x4000-0x407f] [ 0.333741] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.333835] pci 0000:00:0c.0: bridge io port: [0x4000-0x4fff] [ 0.333842] pci 0000:00:0c.0: bridge 32bit mmio: [0xac000000-0xaeffffff] [ 0.333856] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.333886] pci 0000:03:00.0: reg 10 32bit mmio: [0xaa000000-0xaaffffff] [ 0.333893] pci 0000:03:00.0: reg 14 64bit mmio: [0xb0000000-0xbfffffff] [ 0.333901] pci 0000:03:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff] [ 0.333906] pci 0000:03:00.0: reg 24 io port: [0x5000-0x507f] [ 0.333910] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.333959] pci 0000:00:10.0: bridge io port: [0x5000-0x5fff] [ 0.333961] pci 0000:00:10.0: bridge 32bit mmio: [0xaa000000-0xaaffffff] [ 0.333965] pci 0000:00:10.0: bridge 64bit mmio pref: [0xb0000000-0xcdffffff] [ 0.334023] pci 0000:00:15.0: bridge io port: [0x6000-0x6fff] [ 0.334031] pci 0000:00:15.0: bridge 32bit mmio: [0xf0200000-0xf03fffff] [ 0.334044] pci 0000:00:15.0: bridge 64bit mmio pref: [0xf0000000-0xf01fffff] [ 0.334121] pci 0000:06:00.0: reg 10 64bit mmio: [0xf0400000-0xf0403fff] [ 0.334199] pci 0000:06:00.0: supports D1 D2 [ 0.334200] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.334206] pci 0000:06:00.0: PME# disabled [ 0.334290] pci 0000:00:16.0: bridge 32bit mmio: [0xf0400000-0xf04fffff] [ 0.334521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.334681] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] [ 0.334699] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.385336] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11 14 15) [ 0.385519] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15) [ 0.385700] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.385882] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.386062] ACPI: PCI Interrupt Link [Z00Q] (IRQs 18 19 20 21 22 23) *11 [ 0.386243] ACPI: PCI Interrupt Link [Z00R] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.386424] ACPI: PCI Interrupt Link [Z00S] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.386605] ACPI: PCI Interrupt Link [Z00T] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.386786] ACPI: PCI Interrupt Link [Z00U] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.386967] ACPI: PCI Interrupt Link [Z00V] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.387149] ACPI: PCI Interrupt Link [Z00W] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.387330] ACPI: PCI Interrupt Link [Z00X] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.387511] ACPI: PCI Interrupt Link [Z00Y] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.387692] ACPI: PCI Interrupt Link [Z00Z] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.387873] ACPI: PCI Interrupt Link [Z010] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.388055] ACPI: PCI Interrupt Link [Z011] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.388239] ACPI: PCI Interrupt Link [Z012] (IRQs 18 19 20 21 22 23) *10 [ 0.388420] ACPI: PCI Interrupt Link [Z013] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.388601] ACPI: PCI Interrupt Link [Z014] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.388782] ACPI: PCI Interrupt Link [Z015] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.388964] ACPI: PCI Interrupt Link [Z016] (IRQs 18 19 20 21 22 23) *11 [ 0.389144] ACPI: PCI Interrupt Link [Z017] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.389326] ACPI: PCI Interrupt Link [Z018] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.389507] ACPI: PCI Interrupt Link [Z019] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.389688] ACPI: PCI Interrupt Link [Z01A] (IRQs 18 19 20 21 22 23) *10 [ 0.389869] ACPI: PCI Interrupt Link [Z01B] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.390053] ACPI: PCI Interrupt Link [Z01C] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.390235] ACPI: PCI Interrupt Link [Z01D] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.390416] ACPI: PCI Interrupt Link [Z01E] (IRQs 18 19 20 21 22 23) *11 [ 0.390598] ACPI: PCI Interrupt Link [Z01F] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.390782] ACPI: PCI Interrupt Link [Z01G] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.390963] ACPI: PCI Interrupt Link [Z01H] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.391144] ACPI: PCI Interrupt Link [LSMB] (IRQs 18 19 20 21 22 23) *10 [ 0.391325] ACPI: PCI Interrupt Link [LUS0] (IRQs 18 19 20 21 22 23) *7 [ 0.391509] ACPI: PCI Interrupt Link [LUS2] (IRQs 18 19 20 21 22 23) *11 [ 0.391689] ACPI: PCI Interrupt Link [LMAC] (IRQs 18 19 20 21 22 23) *10 [ 0.391869] ACPI: PCI Interrupt Link [LAZA] (IRQs 17) *11 [ 0.392047] ACPI: PCI Interrupt Link [LGPU] (IRQs 18 19 20 21 22 23) *5 [ 0.392228] ACPI: PCI Interrupt Link [LPID] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.392409] ACPI: PCI Interrupt Link [LSI0] (IRQs 18 19 20 21 22 23) *11 [ 0.392596] ACPI: PCI Interrupt Link [LSI1] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.392779] ACPI: PCI Interrupt Link [Z00O] (IRQs 18 19 20 21 22 23) *5 [ 0.392964] ACPI: PCI Interrupt Link [Z00P] (IRQs 18 19 20 21 22 23) *10 [ 0.393145] ACPI: PCI Interrupt Link [LPMU] (IRQs 18 19 20 21 22 23) *10 [ 0.393273] SCSI subsystem initialized [ 0.393286] libata version 3.00 loaded. [ 0.393286] usbcore: registered new interface driver usbfs [ 0.393286] usbcore: registered new interface driver hub [ 0.393286] usbcore: registered new device driver usb [ 0.393286] ACPI: WMI: Mapper loaded [ 0.393286] PCI: Using ACPI for IRQ routing [ 0.420005] Bluetooth: Core ver 2.15 [ 0.420015] NET: Registered protocol family 31 [ 0.420015] Bluetooth: HCI device and connection manager initialized [ 0.420015] Bluetooth: HCI socket layer initialized [ 0.420015] NetLabel: Initializing [ 0.420015] NetLabel: domain hash size = 128 [ 0.420015] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.420024] NetLabel: unlabeled traffic allowed by default [ 0.420062] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31 [ 0.420066] hpet0: 4 comparators, 64-bit 25.000000 MHz counter [ 0.460005] pnp: PnP ACPI init [ 0.460011] ACPI: bus type pnp registered [ 0.460860] pnp 00:03: mem resource (0xf0600000-0xf0607fff) overlaps 0000:00:03.5 BAR 0 (0xf0600000-0xf067ffff), disabling [ 0.464678] pnp: PnP ACPI: found 13 devices [ 0.464680] ACPI: ACPI bus type pnp unregistered [ 0.464687] system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.464689] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.464691] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.464694] system 00:00: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.464700] system 00:04: ioport range 0x1000-0x107f has been reserved [ 0.464702] system 00:04: ioport range 0x1080-0x10ff has been reserved [ 0.464704] system 00:04: ioport range 0x1400-0x147f has been reserved [ 0.464705] system 00:04: ioport range 0x1480-0x14ff has been reserved [ 0.464707] system 00:04: ioport range 0x1800-0x187f has been reserved [ 0.464709] system 00:04: ioport range 0x1880-0x18ff has been reserved [ 0.464716] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.464720] system 00:07: ioport range 0x910-0x911 has been reserved [ 0.464722] system 00:07: ioport range 0x295-0x296 has been reserved [ 0.469360] AppArmor: AppArmor Filesystem Enabled [ 0.469469] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 [ 0.469471] pci 0000:00:09.0: IO window: disabled [ 0.469474] pci 0000:00:09.0: MEM window: 0xf0500000-0xf05fffff [ 0.469477] pci 0000:00:09.0: PREFETCH window: disabled [ 0.469481] pci 0000:02:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff] [ 0.469483] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02 [ 0.469488] pci 0000:00:0c.0: IO window: 0x4000-0x4fff [ 0.469497] pci 0000:00:0c.0: MEM window: 0xac000000-0xaeffffff [ 0.469504] pci 0000:00:0c.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.469517] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 0.469519] pci 0000:00:10.0: IO window: 0x5000-0x5fff [ 0.469522] pci 0000:00:10.0: MEM window: 0xaa000000-0xaaffffff [ 0.469525] pci 0000:00:10.0: PREFETCH window: 0x000000b0000000-0x000000cdffffff [ 0.469528] pci 0000:00:15.0: PCI bridge, secondary bus 0000:04 [ 0.469533] pci 0000:00:15.0: IO window: 0x6000-0x6fff [ 0.469542] pci 0000:00:15.0: MEM window: 0xf0200000-0xf03fffff [ 0.469549] pci 0000:00:15.0: PREFETCH window: 0x000000f0000000-0x000000f01fffff [ 0.469562] pci 0000:00:16.0: PCI bridge, secondary bus 0000:06 [ 0.469563] pci 0000:00:16.0: IO window: disabled [ 0.469573] pci 0000:00:16.0: MEM window: 0xf0400000-0xf04fffff [ 0.469580] pci 0000:00:16.0: PREFETCH window: disabled [ 0.469586] pci 0000:00:17.0: PCI bridge, secondary bus 0000:07 [ 0.469588] pci 0000:00:17.0: IO window: disabled [ 0.469597] pci 0000:00:17.0: MEM window: disabled [ 0.469604] pci 0000:00:17.0: PREFETCH window: disabled [ 0.469611] pci 0000:00:18.0: PCI bridge, secondary bus 0000:08 [ 0.469612] pci 0000:00:18.0: IO window: disabled [ 0.469621] pci 0000:00:18.0: MEM window: disabled [ 0.469628] pci 0000:00:18.0: PREFETCH window: disabled [ 0.469638] pci 0000:00:09.0: setting latency timer to 64 [ 0.469911] ACPI: PCI Interrupt Link [Z00Q] enabled at IRQ 23 [ 0.469913] alloc irq_desc for 23 on node 0 [ 0.469915] alloc kstat_irqs on node 0 [ 0.469918] pci 0000:00:0c.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23 [ 0.469926] pci 0000:00:0c.0: setting latency timer to 64 [ 0.469933] pci 0000:00:10.0: setting latency timer to 64 [ 0.470204] ACPI: PCI Interrupt Link [Z012] enabled at IRQ 22 [ 0.470205] alloc irq_desc for 22 on node 0 [ 0.470207] alloc kstat_irqs on node 0 [ 0.470210] pci 0000:00:15.0: PCI INT A -> Link[Z012] -> GSI 22 (level, low) -> IRQ 22 [ 0.470218] pci 0000:00:15.0: setting latency timer to 64 [ 0.470490] ACPI: PCI Interrupt Link [Z016] enabled at IRQ 21 [ 0.470492] alloc irq_desc for 21 on node 0 [ 0.470493] alloc kstat_irqs on node 0 [ 0.470496] pci 0000:00:16.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21 [ 0.470504] pci 0000:00:16.0: setting latency timer to 64 [ 0.470774] ACPI: PCI Interrupt Link [Z01A] enabled at IRQ 20 [ 0.470776] alloc irq_desc for 20 on node 0 [ 0.470778] alloc kstat_irqs on node 0 [ 0.470780] pci 0000:00:17.0: PCI INT A -> Link[Z01A] -> GSI 20 (level, low) -> IRQ 20 [ 0.470788] pci 0000:00:17.0: setting latency timer to 64 [ 0.471059] ACPI: PCI Interrupt Link [Z01E] enabled at IRQ 19 [ 0.471060] alloc irq_desc for 19 on node 0 [ 0.471062] alloc kstat_irqs on node 0 [ 0.471065] pci 0000:00:18.0: PCI INT A -> Link[Z01E] -> GSI 19 (level, low) -> IRQ 19 [ 0.471072] pci 0000:00:18.0: setting latency timer to 64 [ 0.471077] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.471079] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.471081] pci_bus 0000:01: resource 1 mem: [0xf0500000-0xf05fffff] [ 0.471083] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.471084] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.471086] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff] [ 0.471088] pci_bus 0000:02: resource 1 mem: [0xac000000-0xaeffffff] [ 0.471090] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.471092] pci_bus 0000:03: resource 0 io: [0x5000-0x5fff] [ 0.471093] pci_bus 0000:03: resource 1 mem: [0xaa000000-0xaaffffff] [ 0.471095] pci_bus 0000:03: resource 2 pref mem [0xb0000000-0xcdffffff] [ 0.471097] pci_bus 0000:04: resource 0 io: [0x6000-0x6fff] [ 0.471099] pci_bus 0000:04: resource 1 mem: [0xf0200000-0xf03fffff] [ 0.471100] pci_bus 0000:04: resource 2 pref mem [0xf0000000-0xf01fffff] [ 0.471102] pci_bus 0000:06: resource 1 mem: [0xf0400000-0xf04fffff] [ 0.471122] NET: Registered protocol family 2 [ 0.471242] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.472133] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.475106] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.475576] TCP: Hash tables configured (established 524288 bind 65536) [ 0.475578] TCP reno registered [ 0.475675] NET: Registered protocol family 1 [ 0.475732] Trying to unpack rootfs image as initramfs... [ 0.501594] Switched to high resolution mode on CPU 1 [ 0.510004] Switched to high resolution mode on CPU 0 [ 0.617619] Freeing initrd memory: 7931k freed [ 0.620629] Simple Boot Flag at 0x36 set to 0x1 [ 0.620783] Scanning for low memory corruption every 60 seconds [ 0.620892] audit: initializing netlink socket (disabled) [ 0.620908] type=2000 audit(1272978970.620:1): initialized [ 0.628436] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.629507] VFS: Disk quotas dquot_6.5.2 [ 0.629553] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.629978] fuse init (API version 7.12) [ 0.630046] msgmni has been set to 7419 [ 0.630206] alg: No test for stdrng (krng) [ 0.630216] io scheduler noop registered [ 0.630218] io scheduler anticipatory registered [ 0.630220] io scheduler deadline registered [ 0.630250] io scheduler cfq registered (default) [ 0.630533] pci 0000:03:00.0: Boot video device [ 0.630812] alloc irq_desc for 24 on node 0 [ 0.630814] alloc kstat_irqs on node 0 [ 0.630833] pcieport-driver 0000:00:0c.0: irq 24 for MSI/MSI-X [ 0.630853] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 0.631233] alloc irq_desc for 25 on node 0 [ 0.631235] alloc kstat_irqs on node 0 [ 0.631251] pcieport-driver 0000:00:15.0: irq 25 for MSI/MSI-X [ 0.631270] pcieport-driver 0000:00:15.0: setting latency timer to 64 [ 0.631630] alloc irq_desc for 26 on node 0 [ 0.631631] alloc kstat_irqs on node 0 [ 0.631647] pcieport-driver 0000:00:16.0: irq 26 for MSI/MSI-X [ 0.631666] pcieport-driver 0000:00:16.0: setting latency timer to 64 [ 0.632022] alloc irq_desc for 27 on node 0 [ 0.632024] alloc kstat_irqs on node 0 [ 0.632040] pcieport-driver 0000:00:17.0: irq 27 for MSI/MSI-X [ 0.632059] pcieport-driver 0000:00:17.0: setting latency timer to 64 [ 0.632416] alloc irq_desc for 28 on node 0 [ 0.632418] alloc kstat_irqs on node 0 [ 0.632434] pcieport-driver 0000:00:18.0: irq 28 for MSI/MSI-X [ 0.632452] pcieport-driver 0000:00:18.0: setting latency timer to 64 [ 0.632609] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.632627] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.634348] ACPI: AC Adapter [ADP0] (on-line) [ 0.634407] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.634410] ACPI: Power Button [PWRF] [ 0.634450] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.634452] ACPI: Power Button [PWRB] [ 0.634488] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2c/PNP0C0E:00/input/input2 [ 0.634490] ACPI: Sleep Button [SLPB] [ 0.634530] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 [ 0.640160] ACPI: Lid Switch [LID] [ 0.640865] ACPI: SSDT 000000008fee10c8 00261 (v01 PmRef Cpu0Ist 00003000 INTL 20050228) [ 0.641697] ACPI: SSDT 000000008fee16cc 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228) [ 0.643396] Monitor-Mwait will be used to enter C-1 state [ 0.643413] Monitor-Mwait will be used to enter C-2 state [ 0.643429] Monitor-Mwait will be used to enter C-3 state [ 0.643435] Marking TSC unstable due to TSC halts in idle [ 0.643453] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.643471] processor LNXCPU:00: registered as cooling_device0 [ 0.643473] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.643857] ACPI: SSDT 000000008fee0ed6 001F2 (v01 PmRef Cpu1Ist 00003000 INTL 20050228) [ 0.644211] ACPI: SSDT 000000008fee1647 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228) [ 0.644842] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.644857] processor LNXCPU:01: registered as cooling_device1 [ 0.644859] ACPI: Processor [CPU1] (supports 8 throttling states) [ 0.651677] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.651683] ACPI: Thermal Zone [THRM] (62 C) [ 0.652562] Linux agpgart interface v0.103 [ 0.652567] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.653654] brd: module loaded [ 0.653983] loop: module loaded [ 0.654033] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.654111] ahci 0000:00:0b.0: version 3.0 [ 0.654411] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18 [ 0.654414] alloc irq_desc for 18 on node 0 [ 0.654416] alloc kstat_irqs on node 0 [ 0.654419] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 18 (level, low) -> IRQ 18 [ 0.654445] alloc irq_desc for 29 on node 0 [ 0.654446] alloc kstat_irqs on node 0 [ 0.654451] ahci 0000:00:0b.0: irq 29 for MSI/MSI-X [ 0.654509] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.654511] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part [ 0.654514] ahci 0000:00:0b.0: setting latency timer to 64 [ 0.655582] scsi0 : ahci [ 0.655644] scsi1 : ahci [ 0.655690] scsi2 : ahci [ 0.656271] scsi3 : ahci [ 0.656315] scsi4 : ahci [ 0.656359] scsi5 : ahci [ 0.656635] ata1: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884100 irq 29 [ 0.656637] ata2: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884180 irq 29 [ 0.656639] ata3: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884200 irq 29 [ 0.656641] ata4: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884280 irq 29 [ 0.656643] ata5: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884300 irq 29 [ 0.656645] ata6: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884380 irq 29 [ 0.658017] Fixed MDIO Bus: probed [ 0.658040] PPP generic driver version 2.4.2 [ 0.658094] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.658931] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23 [ 0.658933] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, low) -> IRQ 23 [ 0.658941] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 0.658943] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 0.659151] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 [ 0.659178] ehci_hcd 0000:00:04.1: debug port 1 [ 0.659181] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported [ 0.659194] ehci_hcd 0000:00:04.1: irq 23, io mem 0xf0889000 [ 0.670019] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 0.670073] usb usb1: configuration #1 chosen from 1 choice [ 0.670094] hub 1-0:1.0: USB hub found [ 0.670100] hub 1-0:1.0: 4 ports detected [ 0.670420] ACPI: PCI Interrupt Link [Z00P] enabled at IRQ 22 [ 0.670423] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 22 (level, low) -> IRQ 22 [ 0.670430] ehci_hcd 0000:00:06.1: setting latency timer to 64 [ 0.670432] ehci_hcd 0000:00:06.1: EHCI Host Controller [ 0.670452] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2 [ 0.670473] ehci_hcd 0000:00:06.1: debug port 1 [ 0.670476] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported [ 0.670487] ehci_hcd 0000:00:06.1: irq 22, io mem 0xf0889400 [ 0.690012] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00 [ 0.690055] usb usb2: configuration #1 chosen from 1 choice [ 0.690074] hub 2-0:1.0: USB hub found [ 0.690079] hub 2-0:1.0: 3 ports detected [ 0.690119] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.690412] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21 [ 0.690415] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, low) -> IRQ 21 [ 0.690422] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 0.690424] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 0.690445] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3 [ 0.690461] ohci_hcd 0000:00:04.0: irq 21, io mem 0xf0886000 [ 0.752054] usb usb3: configuration #1 chosen from 1 choice [ 0.752073] hub 3-0:1.0: USB hub found [ 0.752079] hub 3-0:1.0: 4 ports detected [ 0.752395] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 20 [ 0.752397] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 20 (level, low) -> IRQ 20 [ 0.752405] ohci_hcd 0000:00:06.0: setting latency timer to 64 [ 0.752407] ohci_hcd 0000:00:06.0: OHCI Host Controller [ 0.752431] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4 [ 0.752447] ohci_hcd 0000:00:06.0: irq 20, io mem 0xf0887000 [ 0.812055] usb usb4: configuration #1 chosen from 1 choice [ 0.812073] hub 4-0:1.0: USB hub found [ 0.812079] hub 4-0:1.0: 3 ports detected [ 0.812117] uhci_hcd: USB Universal Host Controller Interface driver [ 0.812185] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 0.816596] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.816600] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.816639] mice: PS/2 mouse device common for all mice [ 0.816736] rtc_cmos 00:0a: RTC can wake from S4 [ 0.816766] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0 [ 0.816812] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 0.816893] device-mapper: uevent: version 1.0.3 [ 0.816953] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.817011] device-mapper: multipath: version 1.1.0 loaded [ 0.817014] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.817200] cpuidle: using governor ladder [ 0.817279] cpuidle: using governor menu [ 0.817561] TCP cubic registered [ 0.817655] NET: Registered protocol family 10 [ 0.817970] lo: Disabled Privacy Extensions [ 0.818187] NET: Registered protocol family 17 [ 0.818200] Bluetooth: L2CAP ver 2.13 [ 0.818201] Bluetooth: L2CAP socket layer initialized [ 0.818204] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.818206] Bluetooth: SCO socket layer initialized [ 0.818235] Bluetooth: RFCOMM TTY layer initialized [ 0.818237] Bluetooth: RFCOMM socket layer initialized [ 0.818238] Bluetooth: RFCOMM ver 1.11 [ 0.818621] PM: Resume from disk failed. [ 0.818630] registered taskstats version 1 [ 0.818727] Magic number: 10:390:280 [ 0.818736] tty tty17: hash matches [ 0.818835] rtc_cmos 00:0a: setting system clock to 2010-05-04 13:16:11 UTC (1272978971) [ 0.818838] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.818839] EDD information not available. [ 0.819559] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.000105] Clocksource tsc unstable (delta = -164360388 ns) [ 1.000122] ata5: SATA link down (SStatus 0 SControl 300) [ 1.000138] ata3: SATA link down (SStatus 0 SControl 300) [ 1.000149] ata6: SATA link down (SStatus 0 SControl 300) [ 1.000160] ata4: SATA link down (SStatus 0 SControl 300) [ 1.180062] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.180074] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.180870] ata1.00: ATA-7: SAMSUNG SSD PM800 Series 2.5" 256GB, VBM15D1Q, max UDMA/100 [ 1.180874] ata1.00: 500139360 sectors, multi 16: LBA48 [ 1.181081] ata1.00: configured for UDMA/100 [ 1.197272] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-D633A, D200, max UDMA/100 [ 1.197284] ata2.00: applying bridge limits [ 1.213201] ata2.00: configured for UDMA/100 [ 1.260035] ACPI: EC: missing confirmations, switch off interrupt mode. [ 1.470797] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). [ 1.470800] atkbd.c: Use 'setkeycodes e008 ' to make it known. [ 2.085526] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). [ 2.085529] atkbd.c: Use 'setkeycodes e008 ' to make it known. [ 2.596317] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). [ 2.596320] atkbd.c: Use 'setkeycodes e008 ' to make it known. [ 2.600242] ACPI: Battery Slot [BAT0] (battery present) [ 2.600351] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM80 VBM1 PQ: 0 ANSI: 5 [ 2.600429] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.600441] sd 0:0:0:0: [sda] 500139360 512-byte logical blocks: (256 GB/238 GiB) [ 2.600486] sd 0:0:0:0: [sda] Write Protect is off [ 2.600488] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.600505] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.600592] sda: sda1 < sda5 sda6 > sda2 sda3 [ 2.601565] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.602915] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-D633A D200 PQ: 0 ANSI: 5 [ 2.609275] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.609278] Uniform CD-ROM driver Revision: 3.20 [ 2.609363] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.609395] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.500327] Freeing unused kernel memory: 668k freed [ 3.500545] Write protecting the kernel read-only data: 7600k [ 3.566449] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). [ 3.566452] atkbd.c: Use 'setkeycodes e008 ' to make it known. [ 3.603962] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 3.604280] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 19 [ 3.604284] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 19 (level, low) -> IRQ 19 [ 3.604288] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 3.607181] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 [ 3.607189] ohci1394 0000:01:07.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11 [ 3.614425] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS [ 3.662063] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[f0500000-f05007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 3.777824] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). [ 3.777828] atkbd.c: Use 'setkeycodes e008 ' to make it known. [ 3.782548] hub 1-0:1.0: unable to enumerate USB device on port 4 [ 3.902652] usb 2-3: new high speed USB device using ehci_hcd and address 2 [ 3.997224] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). [ 3.997227] atkbd.c: Use 'setkeycodes e008 ' to make it known. [ 4.130673] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 0, addr 00:22:19:eb:1a:67 [ 4.130676] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3 [ 4.136709] usb 2-3: configuration #1 chosen from 1 choice [ 4.410108] hub 1-0:1.0: unable to enumerate USB device on port 4 [ 4.425055] ACPI Error: Current brightness invalid 20090521 video-538 [ 4.425264] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/device:0c/input/input6 [ 4.425284] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no) [ 4.425304] [Firmware Bug]: ACPI(Z01I) defines _DOD but not _DOS [ 4.535465] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). [ 4.535468] atkbd.c: Use 'setkeycodes e008 ' to make it known. [ 4.750030] usb 3-2: new low speed USB device using ohci_hcd and address 2 [ 4.909609] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). [ 4.909612] atkbd.c: Use 'setkeycodes e008 ' to make it known. [ 4.976327] acpi device:16: registered as cooling_device2 [ 4.976382] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:13/device:14/input/input7 [ 4.976402] ACPI: Video Device [Z01I] (multi-head: yes rom: yes post: no) [ 4.988818] usb 3-2: configuration #1 chosen from 1 choice [ 4.990294] ieee1394: Host added: ID:BUS[0-00:1023] GUID[374fc00009359a21] [ 4.994926] usbcore: registered new interface driver hiddev [ 5.001047] input: USB Optical Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-2/3-2:1.0/input/input8 [ 5.001093] generic-usb 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:04.0-2/input0 [ 5.001102] usbcore: registered new interface driver usbhid [ 5.001104] usbhid: v2.6:USB HID core driver [ 5.119866] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). [ 5.119869] atkbd.c: Use 'setkeycodes e008 ' to make it known. [ 5.776126] xor: automatically using best checksumming function: generic_sse [ 5.820009] generic_sse: 10155.200 MB/sec [ 5.820011] xor: using function: generic_sse (10155.200 MB/sec) [ 5.831668] device-mapper: dm-raid45: initialized v0.2594b [ 5.859053] PM: Starting manual resume from disk [ 5.859056] PM: Resume from partition 8:6 [ 5.859057] PM: Checking hibernation image. [ 5.859251] PM: Resume from disk failed. [ 5.862078] kjournald starting. Commit interval 5 seconds [ 5.862090] EXT3-fs: mounted filesystem with ordered data mode. [ 5.976883] type=1505 audit(1272978976.651:2): operation="profile_load" pid=486 name=/usr/share/gdm/guest-session/Xsession [ 5.980128] type=1505 audit(1272978976.661:3): operation="profile_load" pid=487 name=/sbin/dhclient3 [ 5.980657] type=1505 audit(1272978976.661:4): operation="profile_load" pid=487 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 5.980947] type=1505 audit(1272978976.661:5): operation="profile_load" pid=487 name=/usr/lib/connman/scripts/dhclient-script [ 5.990925] type=1505 audit(1272978976.671:6): operation="profile_load" pid=488 name=/usr/bin/evince [ 5.999547] type=1505 audit(1272978976.671:7): operation="profile_load" pid=488 name=/usr/bin/evince-previewer [ 6.004576] type=1505 audit(1272978976.681:8): operation="profile_load" pid=488 name=/usr/bin/evince-thumbnailer [ 6.013342] type=1505 audit(1272978976.691:9): operation="profile_load" pid=490 name=/usr/lib/cups/backend/cups-pdf [ 6.013993] type=1505 audit(1272978976.691:10): operation="profile_load" pid=490 name=/usr/sbin/cupsd [ 6.016131] type=1505 audit(1272978976.691:11): operation="profile_load" pid=491 name=/usr/sbin/mysqld [ 6.196600] Adding 1951856k swap on /dev/sda6. Priority:-1 extents:1 across:1951856k SS [ 6.256436] udev: starting version 147 [ 6.301631] lp: driver loaded but no devices found [ 6.311546] lib80211: common routines for IEEE802.11 drivers [ 6.311548] lib80211_crypt: registered algorithm 'NULL' [ 6.313794] lib80211_crypt: registered algorithm 'WEP' [ 6.315827] lib80211_crypt: registered algorithm 'CCMP' [ 6.317932] lib80211_crypt: registered algorithm 'TKIP' [ 6.360532] EXT3 FS on sda2, internal journal [ 6.824197] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0). [ 6.824202] atkbd.c: Use 'setkeycodes e008 ' to make it known. [ 7.510152] usb 3-4: new full speed USB device using ohci_hcd and address 3 [ 7.557927] nvidia: module license 'NVIDIA' taints kernel. [ 7.557931] Disabling lock debugging due to kernel taint [ 7.595770] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 7.812326] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 18 [ 7.812330] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 18 (level, low) -> IRQ 18 [ 7.812370] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.814118] nvidia 0000:02:00.0: enabling device (0004 -> 0007) [ 7.814128] nvidia 0000:02:00.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23 [ 7.814139] nvidia 0000:02:00.0: setting latency timer to 64 [ 7.817076] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 23 [ 7.817079] nvidia 0000:03:00.0: PCI INT A -> Link[LGPU] -> GSI 23 (level, low) -> IRQ 23 [ 7.817083] nvidia 0000:03:00.0: setting latency timer to 64 [ 7.817275] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.15 Fri Mar 12 00:29:13 PST 2010 [ 7.820929] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.823868] ricoh-mmc: Ricoh MMC Controller disabling driver [ 7.823870] ricoh-mmc: Copyright(c) Philip Langdale [ 7.823922] ricoh-mmc: Ricoh MMC controller found at 0000:01:07.2 [1180:0843] (rev 12) [ 7.823934] ricoh-mmc: Controller is now disabled. [ 7.825907] sdhci: Secure Digital Host Controller Interface driver [ 7.825909] sdhci: Copyright(c) Pierre Ossman [ 7.827349] sdhci-pci 0000:01:07.1: SDHCI controller found [1180:0822] (rev 22) [ 7.827642] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11 [ 7.827645] sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 [ 7.827670] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 7.827698] Registered led device: mmc0:: [ 7.827723] mmc0: SDHCI controller on PCI [0000:01:07.1] using DMA [ 7.827984] usb 3-4: configuration #1 chosen from 1 choice [ 7.830799] hub 3-4:1.0: USB hub found [ 7.833764] hub 3-4:1.0: 3 ports detected [ 7.901147] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 [ 7.901161] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2000 [ 7.914628] Linux video capture interface: v2.00 [ 7.922105] input: Dell WMI hotkeys as /devices/virtual/input/input9 [ 7.926572] uvcvideo: Found UVC 1.00 device Integrated_Webcam_1.3M (0c45:63fc) [ 7.934483] input: Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.0/input/input10 [ 7.934535] usbcore: registered new interface driver uvcvideo [ 7.934539] USB Video Class driver (v0.1.0) [ 8.161768] usb 3-4.1: new full speed USB device using ohci_hcd and address 4 [ 8.169760] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.172765] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.176111] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.178809] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.181927] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.181928] hub 3-4:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 8.184759] hub 3-4:1.0: cannot disable port 1 (err = -62) [ 8.187964] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.190760] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.193754] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.196762] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.199805] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.199807] hub 3-4:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 8.202756] hub 3-4:1.0: cannot disable port 1 (err = -62) [ 8.205762] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.208752] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.211759] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.215091] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.217750] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.217752] hub 3-4:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 8.220843] hub 3-4:1.0: cannot disable port 1 (err = -62) [ 8.224027] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.227158] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.229800] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.232920] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.235877] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 8.235879] hub 3-4:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 8.238759] hub 3-4:1.0: cannot disable port 1 (err = -62) [ 8.238764] hub 3-4:1.0: unable to enumerate USB device on port 1 [ 8.241784] hub 3-4:1.0: cannot disable port 1 (err = -62) [ 8.244960] hub 3-4:1.0: hub_port_status failed (err = -62) [ 8.247785] hub 3-4:1.0: hub_port_status failed (err = -62) [ 8.250784] hub 3-4:1.0: hub_port_status failed (err = -62) [ 8.250794] usb 3-4: USB disconnect, address 3 [ 8.399046] HDA Intel 0000:00:08.0: power state changed by ACPI to D0 [ 8.399330] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17 [ 8.399334] alloc irq_desc for 17 on node 0 [ 8.399335] alloc kstat_irqs on node 0 [ 8.399341] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17 [ 8.399343] hda_intel: probe_mask set to 0x9 for device 1028:0271 [ 8.399390] HDA Intel 0000:00:08.0: setting latency timer to 64 [ 8.594318] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000 [ 8.641679] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 9.120185] usb 3-4: new full speed USB device using ohci_hcd and address 8 [ 9.356372] usb 3-4: configuration #1 chosen from 1 choice [ 9.359050] hub 3-4:1.0: USB hub found [ 9.361865] hub 3-4:1.0: 3 ports detected [ 9.473768] hub 3-4:1.0: hub_port_status failed (err = -62) [ 9.477037] hub 3-4:1.0: hub_port_status failed (err = -62) [ 9.479880] hub 3-4:1.0: hub_port_status failed (err = -62) [ 9.540051] usb 3-4: USB disconnect, address 8 [ 9.960109] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input12 [ 10.960040] usb 3-4: new full speed USB device using ohci_hcd and address 9 [ 11.195957] usb 3-4: configuration #1 chosen from 1 choice [ 11.198801] hub 3-4:1.0: USB hub found [ 11.200106] input: HDA NVidia Mic at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input13 [ 11.200181] input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input14 [ 11.200223] input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input15 [ 11.201923] hub 3-4:1.0: 3 ports detected [ 11.511762] usb 3-4.1: new full speed USB device using ohci_hcd and address 10 [ 11.636999] usb 3-4.1: configuration #1 chosen from 1 choice [ 11.645984] input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input16 [ 11.646041] generic-usb 0003:413C:8157.0002: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0 [ 11.721884] usb 3-4.2: new full speed USB device using ohci_hcd and address 11 [ 11.847861] usb 3-4.2: configuration #1 chosen from 1 choice [ 11.859070] input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input17 [ 11.859165] generic-usb 0003:413C:8158.0003: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0 [ 12.221836] hub 3-4:1.0: hub_port_status failed (err = -62) [ 12.224816] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.227763] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.230789] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.234827] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.234830] hub 3-4:1.0: Cannot enable port 3. Maybe the USB cable is bad? [ 12.237756] hub 3-4:1.0: cannot disable port 3 (err = -62) [ 12.240759] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.243810] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.246850] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.249826] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.252924] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.252926] hub 3-4:1.0: Cannot enable port 3. Maybe the USB cable is bad? [ 12.255763] hub 3-4:1.0: cannot disable port 3 (err = -62) [ 12.258843] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.261804] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.264852] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.267764] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.270823] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.270825] hub 3-4:1.0: Cannot enable port 3. Maybe the USB cable is bad? [ 12.274804] hub 3-4:1.0: cannot disable port 3 (err = -62) [ 12.277783] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.280802] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.283759] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.286788] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.290047] hub 3-4:1.0: cannot reset port 3 (err = -62) [ 12.290049] hub 3-4:1.0: Cannot enable port 3. Maybe the USB cable is bad? [ 12.292840] hub 3-4:1.0: cannot disable port 3 (err = -62) [ 12.292844] hub 3-4:1.0: unable to enumerate USB device on port 3 [ 12.295759] hub 3-4:1.0: cannot disable port 3 (err = -62) [ 12.295772] usb 3-4: USB disconnect, address 9 [ 12.295774] usb 3-4.1: USB disconnect, address 10 [ 12.350486] usb 3-4.2: USB disconnect, address 11 [ 13.130070] usb 3-4: new full speed USB device using ohci_hcd and address 16 [ 13.250099] hub 3-0:1.0: unable to enumerate USB device on port 4 [ 14.290040] usb 3-4: new full speed USB device using ohci_hcd and address 17 [ 14.525994] usb 3-4: configuration #1 chosen from 1 choice [ 14.529026] hub 3-4:1.0: USB hub found [ 14.531760] hub 3-4:1.0: 3 ports detected [ 14.643534] usb 3-4: USB disconnect, address 17 [ 14.643841] hub 3-4:1.0: hub_port_status failed (err = -19) [ 14.643844] hub 3-4:1.0: hub_port_status failed (err = -19) [ 17.992534] usb 3-4: new full speed USB device using ohci_hcd and address 18 [ 18.225864] usb 3-4: configuration #1 chosen from 1 choice [ 18.228781] hub 3-4:1.0: USB hub found [ 18.231765] hub 3-4:1.0: 3 ports detected [ 18.531813] usb 3-4.1: new full speed USB device using ohci_hcd and address 19 [ 18.539761] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.542761] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.545959] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.548806] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.551967] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.551969] hub 3-4:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 18.554782] hub 3-4:1.0: cannot disable port 1 (err = -62) [ 18.557993] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.560804] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.563937] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.566807] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.569763] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.569766] hub 3-4:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 18.573086] hub 3-4:1.0: cannot disable port 1 (err = -62) [ 18.575828] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.578937] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.581753] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.585289] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.587748] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.587750] hub 3-4:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 18.591022] hub 3-4:1.0: cannot disable port 1 (err = -62) [ 18.593765] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.596760] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.599763] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.602756] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.606006] hub 3-4:1.0: cannot reset port 1 (err = -62) [ 18.606008] hub 3-4:1.0: Cannot enable port 1. Maybe the USB cable is bad? [ 18.608827] hub 3-4:1.0: cannot disable port 1 (err = -62) [ 18.608830] hub 3-4:1.0: unable to enumerate USB device on port 1 [ 18.611761] hub 3-4:1.0: cannot disable port 1 (err = -62) [ 18.614869] hub 3-4:1.0: hub_port_status failed (err = -62) [ 18.617763] hub 3-4:1.0: hub_port_status failed (err = -62) [ 18.620805] hub 3-4:1.0: hub_port_status failed (err = -62) [ 18.620817] usb 3-4: USB disconnect, address 18 [ 20.042810] hub 3-0:1.0: unable to enumerate USB device on port 4 [ 20.480188] hub 1-0:1.0: unable to enumerate USB device on port 4 [ 21.240098] hub 3-0:1.0: unable to enumerate USB device on port 4 [ 22.230081] usb 3-4: new full speed USB device using ohci_hcd and address 25 [ 22.466111] usb 3-4: configuration #1 chosen from 1 choice [ 22.468828] hub 3-4:1.0: USB hub found [ 22.471761] hub 3-4:1.0: 3 ports detected [ 22.771777] usb 3-4.1: new full speed USB device using ohci_hcd and address 26 [ 22.896910] usb 3-4.1: configuration #1 chosen from 1 choice [ 22.907127] input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input18 [ 22.907178] generic-usb 0003:413C:8157.0004: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0 [ 23.001758] usb 3-4.2: new full speed USB device using ohci_hcd and address 27 [ 23.127911] usb 3-4.2: configuration #1 chosen from 1 choice [ 23.139390] input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input19 [ 23.139454] generic-usb 0003:413C:8158.0005: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0 [ 23.275932] usb 3-4: USB disconnect, address 25 [ 23.275936] usb 3-4.1: USB disconnect, address 26 [ 23.380301] usb 3-4.2: USB disconnect, address 27 [ 24.300033] usb 3-4: new full speed USB device using ohci_hcd and address 28 [ 24.535854] usb 3-4: configuration #1 chosen from 1 choice [ 24.538815] hub 3-4:1.0: USB hub found [ 24.541759] hub 3-4:1.0: 3 ports detected [ 24.841801] usb 3-4.1: new full speed USB device using ohci_hcd and address 29 [ 24.966826] usb 3-4.1: configuration #1 chosen from 1 choice [ 24.977016] input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input20 [ 24.977061] generic-usb 0003:413C:8157.0006: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0 [ 25.071778] usb 3-4.2: new full speed USB device using ohci_hcd and address 30 [ 25.198068] usb 3-4.2: configuration #1 chosen from 1 choice [ 25.209092] input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input21 [ 25.209168] generic-usb 0003:413C:8158.0007: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0 [ 25.381762] hub 3-4:1.0: hub_port_status failed (err = -62) [ 25.381767] __ratelimit: 6 callbacks suppressed [ 25.381770] hub 3-4:1.0: connect-debounce failed, port 3 disabled [ 25.381782] usb 3-4: USB disconnect, address 28 [ 25.381784] usb 3-4.1: USB disconnect, address 29 [ 25.460226] usb 3-4.2: USB disconnect, address 30 [ 26.590050] usb 3-4: new full speed USB device using ohci_hcd and address 31 [ 26.825833] usb 3-4: configuration #1 chosen from 1 choice [ 26.828797] hub 3-4:1.0: USB hub found [ 26.831761] hub 3-4:1.0: 3 ports detected [ 27.131764] usb 3-4.1: new full speed USB device using ohci_hcd and address 32 [ 27.256856] usb 3-4.1: configuration #1 chosen from 1 choice [ 27.266986] input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input22 [ 27.267031] generic-usb 0003:413C:8157.0008: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0 [ 27.361757] usb 3-4.2: new full speed USB device using ohci_hcd and address 33 [ 27.487849] usb 3-4.2: configuration #1 chosen from 1 choice [ 27.499092] input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input23 [ 27.499146] generic-usb 0003:413C:8158.0009: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0 [ 27.523505] usb 3-4: USB disconnect, address 31 [ 27.523507] usb 3-4.1: USB disconnect, address 32 [ 27.650186] usb 3-4.2: USB disconnect, address 33 [ 29.150035] usb 3-4: new full speed USB device using ohci_hcd and address 34 [ 29.385858] usb 3-4: configuration #1 chosen from 1 choice [ 29.388793] hub 3-4:1.0: USB hub found [ 29.391758] hub 3-4:1.0: 3 ports detected [ 29.691763] usb 3-4.1: new full speed USB device using ohci_hcd and address 35 [ 29.817149] usb 3-4.1: configuration #1 chosen from 1 choice [ 29.827018] input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input24 [ 29.827066] generic-usb 0003:413C:8157.000A: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0 [ 29.921762] usb 3-4.2: new full speed USB device using ohci_hcd and address 36 [ 30.047869] usb 3-4.2: configuration #1 chosen from 1 choice [ 30.059081] input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input25 [ 30.059138] generic-usb 0003:413C:8158.000B: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0 [ 30.491776] usb 3-4.3: new full speed USB device using ohci_hcd and address 37 [ 30.625857] usb 3-4.3: configuration #1 chosen from 1 choice [ 30.643369] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 30.643442] usbcore: registered new interface driver btusb [ 34.123225] usb 3-4: USB disconnect, address 34 [ 34.123229] usb 3-4.1: USB disconnect, address 35 [ 34.180453] usb 3-4.2: USB disconnect, address 36 [ 34.180574] usb 3-4.3: USB disconnect, address 37 [ 38.022565] usb 3-4: new full speed USB device using ohci_hcd and address 38 [ 38.255855] usb 3-4: configuration #1 chosen from 1 choice [ 38.258798] hub 3-4:1.0: USB hub found [ 38.261759] hub 3-4:1.0: 3 ports detected [ 38.561760] usb 3-4.1: new full speed USB device using ohci_hcd and address 39 [ 38.686827] usb 3-4.1: configuration #1 chosen from 1 choice [ 38.696019] input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input26 [ 38.696072] generic-usb 0003:413C:8157.000C: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0 [ 38.781760] usb 3-4.2: new full speed USB device using ohci_hcd and address 40 [ 38.907847] usb 3-4.2: configuration #1 chosen from 1 choice [ 38.919088] input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input27 [ 38.919144] generic-usb 0003:413C:8158.000D: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0 [ 39.361764] usb 3-4.3: new full speed USB device using ohci_hcd and address 41 [ 39.495859] usb 3-4.3: configuration #1 chosen from 1 choice [ 40.916125] usb 3-4: USB disconnect, address 38 [ 40.916128] usb 3-4.1: USB disconnect, address 39 [ 40.970259] usb 3-4.2: USB disconnect, address 40 [ 40.970352] usb 3-4.3: USB disconnect, address 41 [ 43.370039] usb 3-4: new full speed USB device using ohci_hcd and address 42 [ 43.605886] usb 3-4: configuration #1 chosen from 1 choice [ 43.608807] hub 3-4:1.0: USB hub found [ 43.611915] hub 3-4:1.0: 3 ports detected [ 43.941806] usb 3-4.1: new full speed USB device using ohci_hcd and address 43 [ 44.086858] usb 3-4.1: configuration #1 chosen from 1 choice [ 44.097309] input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input28 [ 44.097363] generic-usb 0003:413C:8157.000E: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0 [ 44.181835] usb 3-4.2: new full speed USB device using ohci_hcd and address 44 [ 44.327856] usb 3-4.2: configuration #1 chosen from 1 choice [ 44.339082] input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input29 [ 44.339141] generic-usb 0003:413C:8158.000F: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0 [ 44.373783] usb 3-4: USB disconnect, address 42 [ 44.373787] usb 3-4.1: USB disconnect, address 43 [ 44.450868] usb 3-4.2: USB disconnect, address 44 [ 46.040039] usb 3-4: new full speed USB device using ohci_hcd and address 45 [ 46.277873] usb 3-4: configuration #1 chosen from 1 choice [ 46.280799] hub 3-4:1.0: USB hub found [ 46.283755] hub 3-4:1.0: 3 ports detected [ 46.581768] usb 3-4.1: new full speed USB device using ohci_hcd and address 46 [ 46.706847] usb 3-4.1: configuration #1 chosen from 1 choice [ 46.717032] input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input30 [ 46.717090] generic-usb 0003:413C:8157.0010: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0 [ 46.801762] usb 3-4.2: new full speed USB device using ohci_hcd and address 47 [ 46.927965] usb 3-4.2: configuration #1 chosen from 1 choice [ 46.939068] input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input31 [ 46.939128] generic-usb 0003:413C:8158.0011: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0 [ 47.311760] usb 3-4.3: new full speed USB device using ohci_hcd and address 48 [ 47.445841] usb 3-4.3: configuration #1 chosen from 1 choice [ 48.163720] usb 3-4: USB disconnect, address 45 [ 48.163724] usb 3-4.1: USB disconnect, address 46 [ 48.220190] usb 3-4.2: USB disconnect, address 47 [ 48.220281] usb 3-4.3: USB disconnect, address 48 [ 51.488315] kjournald starting. Commit interval 5 seconds [ 51.488419] EXT3 FS on sda5, internal journal [ 51.488422] EXT3-fs: mounted filesystem with ordered data mode. [ 51.680073] usb 3-4: new full speed USB device using ohci_hcd and address 49 [ 51.852845] type=1505 audit(1272993422.531:14): operation="profile_replace" pid=1264 name=/usr/share/gdm/guest-session/Xsession [ 51.870505] eth0: no link during initialization. [ 51.871123] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 51.873088] type=1505 audit(1272993422.551:15): operation="profile_replace" pid=1278 name=/sbin/dhclient3 [ 51.873627] type=1505 audit(1272993422.551:16): operation="profile_replace" pid=1278 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 51.873918] type=1505 audit(1272993422.551:17): operation="profile_replace" pid=1278 name=/usr/lib/connman/scripts/dhclient-script [ 51.887081] type=1505 audit(1272993422.561:18): operation="profile_replace" pid=1282 name=/usr/bin/evince [ 51.895627] type=1505 audit(1272993422.571:19): operation="profile_replace" pid=1282 name=/usr/bin/evince-previewer [ 51.901228] type=1505 audit(1272993422.581:20): operation="profile_replace" pid=1282 name=/usr/bin/evince-thumbnailer [ 51.909395] type=1505 audit(1272993422.581:21): operation="profile_replace" pid=1285 name=/usr/lib/cups/backend/cups-pdf [ 51.910016] type=1505 audit(1272993422.591:22): operation="profile_replace" pid=1285 name=/usr/sbin/cupsd [ 51.929927] usb 3-4: configuration #1 chosen from 1 choice [ 51.932800] hub 3-4:1.0: USB hub found [ 51.935759] hub 3-4:1.0: 3 ports detected [ 52.121616] usplash:415 freeing invalid memtype ffffffffcd000000-ffffffffcde00000 [ 52.293767] usb 3-4.1: new full speed USB device using ohci_hcd and address 50 [ 52.416857] usb 3-4.1: configuration #1 chosen from 1 choice [ 52.426005] input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input32 [ 52.426053] generic-usb 0003:413C:8157.0012: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0 [ 52.522524] usb 3-4.2: new full speed USB device using ohci_hcd and address 51 [ 52.649821] usb 3-4.2: configuration #1 chosen from 1 choice [ 52.661025] input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input33 [ 52.661081] generic-usb 0003:413C:8158.0013: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0 [ 52.889377] usb 3-4: USB disconnect, address 49 [ 52.889379] usb 3-4.1: USB disconnect, address 50 [ 52.982332] usb 3-4.2: USB disconnect, address 51 [ 54.123364] NVRM: failed to copy vbios to system memory. [ 54.123560] NVRM: RmInitAdapter failed! (0x30:0xffffffff:868) [ 54.123565] NVRM: rm_init_adapter(0) failed [ 54.522780] hub 1-0:1.0: unable to enumerate USB device on port 4