[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-22-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #36-Ubuntu SMP Thu Jun 3 19:31:57 UTC 2010 (Ubuntu 2.6.32-22.36-generic 2.6.32.11+drm33.2) [ 0.000000] Command line: root=UUID=dce8f43b-436e-43f6-8301-436a5a3aef26 ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000afff0000 (usable) [ 0.000000] BIOS-e820: 00000000afff0000 - 00000000afff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afff3000 - 00000000b0000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000b0000000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000150000000 (usable) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x150000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFE0000000 write-back [ 0.000000] 2 base 00A0000000 mask FFF0000000 write-back [ 0.000000] 3 base 0100000000 mask FFC0000000 write-back [ 0.000000] 4 base 0140000000 mask FFF0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000150000000 aka 5376M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000b0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xafff0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000afff0000 (usable) [ 0.000000] modified: 00000000afff0000 - 00000000afff3000 (ACPI NVS) [ 0.000000] modified: 00000000afff3000 - 00000000b0000000 (ACPI data) [ 0.000000] modified: 00000000b0000000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000e8000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000150000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000afff0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 00afe00000 page 2M [ 0.000000] 00afe00000 - 00afff0000 page 4k [ 0.000000] kernel direct mapping tables up to afff0000 @ 8000-d000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000150000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0150000000 page 2M [ 0.000000] kernel direct mapping tables up to 150000000 @ b000-12000 [ 0.000000] RAMDISK: 3728a000 - 37fefce3 [ 0.000000] ACPI: RSDP 00000000000f6640 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000afff3000 00034 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: FACP 00000000afff3040 00074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: DSDT 00000000afff30c0 04C8E (v01 GBT NVDAACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 00000000afff0000 00040 [ 0.000000] ACPI: HPET 00000000afff7e40 00038 (v01 GBT NVDAACPI 42302E31 NVDA 00000098) [ 0.000000] ACPI: MCFG 00000000afff7e80 0003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: APIC 00000000afff7d80 00098 (v01 GBT NVDAACPI 42302E31 NVDA 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000150000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000150000000 [ 0.000000] NODE_DATA [000000000000d000 - 0000000000011fff] [ 0.000000] bootmap [0000000000012000 - 000000000003bfff] pages 2a [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0150000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64] [ 0.000000] #3 [003728a000 - 0037fefce3] RAMDISK ==> [003728a000 - 0037fefce3] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0001a2a000 - 0001a2a08e] BRK ==> [0001a2a000 - 0001a2a08e] [ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #7 [000000b000 - 000000d000] PGTABLE ==> [000000b000 - 000000d000] [ 0.000000] found SMP MP-table at [ffff8800000f4cd0] f4cd0 [ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00150000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000afff0 [ 0.000000] 0: 0x00100000 -> 0x00150000 [ 0.000000] On node 0 totalpages: 1048458 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 104 pages reserved [ 0.000000] DMA zone: 3834 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 702504 pages, LIFO batch:31 [ 0.000000] Normal zone: 4480 pages used for memmap [ 0.000000] Normal zone: 323200 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfefffc00 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000afff0000 - 00000000afff3000 [ 0.000000] PM: Registered nosave memory: 00000000afff3000 - 00000000b0000000 [ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e8000000 [ 0.000000] PM: Registered nosave memory: 00000000e8000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288 [ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029538 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=dce8f43b-436e-43f6-8301-436a5a3aef26 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 8f90000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 4044004k/5505024k available (5409k kernel code, 1311192k absent, 149828k reserved, 2976k data, 876k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 41943040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3115.935 MHz processor. [ 0.020005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6231.87 BogoMIPS (lpj=31159350) [ 0.020029] Security Framework initialized [ 0.020045] AppArmor: AppArmor initialized [ 0.020304] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.023030] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.024321] Mount-cache hash table entries: 256 [ 0.024458] Initializing cgroup subsys ns [ 0.024461] Initializing cgroup subsys cpuacct [ 0.024464] Initializing cgroup subsys memory [ 0.024472] Initializing cgroup subsys devices [ 0.024474] Initializing cgroup subsys freezer [ 0.024475] Initializing cgroup subsys net_cls [ 0.024494] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.024495] CPU: L2 Cache: 512K (64 bytes/line) [ 0.024497] CPU 0/0x0 -> Node 0 [ 0.024499] tseg: 0000000000 [ 0.024516] CPU: Physical Processor ID: 0 [ 0.024517] CPU: Processor Core ID: 0 [ 0.024519] mce: CPU supports 5 MCE banks [ 0.024529] using C1E aware idle routine [ 0.024530] Performance Events: AMD PMU driver. [ 0.024534] ... version: 0 [ 0.024535] ... bit width: 48 [ 0.024536] ... generic registers: 4 [ 0.024537] ... value mask: 0000ffffffffffff [ 0.024538] ... max period: 00007fffffffffff [ 0.024539] ... fixed-purpose events: 0 [ 0.024541] ... event mask: 000000000000000f [ 0.025779] ACPI: Core revision 20090903 [ 0.034489] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.034493] ftrace: allocating 22518 entries in 89 pages [ 0.039507] Setting APIC routing to flat [ 0.039966] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.140021] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 02 [ 0.150000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.030000] Initializing CPU#1 [ 0.030000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030000] CPU 1/0x1 -> Node 0 [ 0.030000] CPU: Physical Processor ID: 0 [ 0.030000] CPU: Processor Core ID: 1 [ 0.300075] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 02 [ 0.300086] Brought up 2 CPUs [ 0.300088] Total of 2 processors activated (12463.97 BogoMIPS). [ 0.300271] CPU0 attaching sched-domain: [ 0.300273] domain 0: span 0-1 level MC [ 0.300275] groups: 0 1 [ 0.300279] CPU1 attaching sched-domain: [ 0.300280] domain 0: span 0-1 level MC [ 0.300282] groups: 1 0 [ 0.300349] devtmpfs: initialized [ 0.300349] regulator: core version 0.5 [ 0.300349] Time: 13:45:09 Date: 06/15/10 [ 0.300349] NET: Registered protocol family 16 [ 0.300349] node 0 link 0: io port [1000, fffff] [ 0.300349] Trying to unpack rootfs image as initramfs... [ 0.300349] TOM: 00000000b0000000 aka 2816M [ 0.300349] node 0 link 0: mmio [e0000000, e7ffffff] [ 0.300349] node 0 link 0: mmio [a0000, bffff] [ 0.300349] node 0 link 0: mmio [b0000000, ffb7ffff] [ 0.300349] TOM2: 0000000150000000 aka 5376M [ 0.300349] bus: [00,ff] on node 0 link 0 [ 0.300349] bus: 00 index 0 io port: [0, ffff] [ 0.300349] bus: 00 index 1 mmio: [b0000000, ffffffff] [ 0.300349] bus: 00 index 2 mmio: [a0000, bffff] [ 0.300349] bus: 00 index 3 mmio: [150000000, fcffffffff] [ 0.300349] ACPI: bus type pci registered [ 0.300349] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 127 [ 0.300349] PCI: MCFG area at e0000000 reserved in E820 [ 0.304068] PCI: Using MMCONFIG at e0000000 - e7ffffff [ 0.304070] PCI: Using configuration type 1 for base access [ 0.310124] bio: create slab at 0 [ 0.310948] ACPI: EC: Look up EC in DSDT [ 0.316615] ACPI: Interpreter enabled [ 0.316618] ACPI: (supports S0 S1 S4 S5) [ 0.316635] ACPI: Using IOAPIC for interrupt routing [ 0.322915] ACPI: No dock devices found. [ 0.322994] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.323226] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.323261] pci 0000:00:01.1: reg 10 io port: [0xa000-0xa03f] [ 0.323278] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f] [ 0.323283] pci 0000:00:01.1: reg 24 io port: [0x1c80-0x1cbf] [ 0.323309] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.323314] pci 0000:00:01.1: PME# disabled [ 0.323349] pci 0000:00:02.0: reg 10 32bit mmio: [0xee004000-0xee004fff] [ 0.323382] pci 0000:00:02.0: supports D1 D2 [ 0.323383] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.323387] pci 0000:00:02.0: PME# disabled [ 0.323416] pci 0000:00:02.1: reg 10 32bit mmio: [0xee008000-0xee0080ff] [ 0.323451] pci 0000:00:02.1: supports D1 D2 [ 0.323452] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.323455] pci 0000:00:02.1: PME# disabled [ 0.323499] pci 0000:00:04.0: reg 20 io port: [0xf000-0xf00f] [ 0.323549] pci 0000:00:05.0: reg 10 io port: [0xac00-0xac07] [ 0.323554] pci 0000:00:05.0: reg 14 io port: [0xb000-0xb003] [ 0.323559] pci 0000:00:05.0: reg 18 io port: [0xb400-0xb407] [ 0.323563] pci 0000:00:05.0: reg 1c io port: [0xb800-0xb803] [ 0.323568] pci 0000:00:05.0: reg 20 io port: [0xbc00-0xbc0f] [ 0.323573] pci 0000:00:05.0: reg 24 32bit mmio: [0xee009000-0xee009fff] [ 0.323630] pci 0000:00:05.1: reg 10 io port: [0xc000-0xc007] [ 0.323635] pci 0000:00:05.1: reg 14 io port: [0xc400-0xc403] [ 0.323640] pci 0000:00:05.1: reg 18 io port: [0xc800-0xc807] [ 0.323644] pci 0000:00:05.1: reg 1c io port: [0xcc00-0xcc03] [ 0.323649] pci 0000:00:05.1: reg 20 io port: [0xd000-0xd00f] [ 0.323654] pci 0000:00:05.1: reg 24 32bit mmio: [0xee00a000-0xee00afff] [ 0.323709] pci 0000:00:05.2: reg 10 io port: [0xd400-0xd407] [ 0.323714] pci 0000:00:05.2: reg 14 io port: [0xd800-0xd803] [ 0.323719] pci 0000:00:05.2: reg 18 io port: [0xdc00-0xdc07] [ 0.323723] pci 0000:00:05.2: reg 1c io port: [0xe000-0xe003] [ 0.323728] pci 0000:00:05.2: reg 20 io port: [0xe400-0xe40f] [ 0.323733] pci 0000:00:05.2: reg 24 32bit mmio: [0xee00b000-0xee00bfff] [ 0.323839] pci 0000:00:06.1: reg 10 32bit mmio: [0xee000000-0xee003fff] [ 0.323878] pci 0000:00:06.1: PME# supported from D3hot D3cold [ 0.323881] pci 0000:00:06.1: PME# disabled [ 0.323934] pci 0000:00:08.0: reg 10 32bit mmio: [0xee005000-0xee005fff] [ 0.323939] pci 0000:00:08.0: reg 14 io port: [0xe800-0xe807] [ 0.323944] pci 0000:00:08.0: reg 18 32bit mmio: [0xee006000-0xee0060ff] [ 0.323949] pci 0000:00:08.0: reg 1c 32bit mmio: [0xee007000-0xee00700f] [ 0.323983] pci 0000:00:08.0: supports D1 D2 [ 0.323984] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.323988] pci 0000:00:08.0: PME# disabled [ 0.324053] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.324056] pci 0000:00:0a.0: PME# disabled [ 0.324124] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.324126] pci 0000:00:0f.0: PME# disabled [ 0.324248] pci 0000:00:06.0: transparent bridge [ 0.324251] pci 0000:00:06.0: bridge io port: [0x9000-0x9fff] [ 0.324288] pci 0000:02:00.0: reg 10 32bit mmio: [0xeb000000-0xebffffff] [ 0.324298] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.324308] pci 0000:02:00.0: reg 1c 64bit mmio: [0xec000000-0xecffffff] [ 0.324317] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.324391] pci 0000:00:0a.0: bridge 32bit mmio: [0xeb000000-0xedffffff] [ 0.324395] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.324428] pci 0000:03:00.0: reg 10 32bit mmio: [0xe8000000-0xe8ffffff] [ 0.324437] pci 0000:03:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.324447] pci 0000:03:00.0: reg 1c 64bit mmio: [0xe9000000-0xe9ffffff] [ 0.324456] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.324528] pci 0000:00:0f.0: bridge 32bit mmio: [0xe8000000-0xeaffffff] [ 0.324532] pci 0000:00:0f.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.324545] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.324739] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.366429] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.366533] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.366635] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.366736] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.366838] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.366940] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 *15) [ 0.367042] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15) [ 0.367142] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.367244] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.367346] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 *15) [ 0.367449] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15) [ 0.367551] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15) [ 0.367652] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.367755] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15) [ 0.367864] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) [ 0.367965] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.368068] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 11 14 *15) [ 0.368169] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 0.368271] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15) [ 0.368410] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.368544] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.368677] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.368810] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.368943] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.369076] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0 [ 0.369209] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 0.369342] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.369477] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.369610] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.369744] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.369879] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.370035] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.370170] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.370305] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.370444] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.370580] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.370715] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 0.370850] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 0.370965] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none [ 0.370969] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.370971] vgaarb: loaded [ 0.371064] SCSI subsystem initialized [ 0.371159] libata version 3.00 loaded. [ 0.371217] usbcore: registered new interface driver usbfs [ 0.371226] usbcore: registered new interface driver hub [ 0.371247] usbcore: registered new device driver usb [ 0.371366] ACPI: WMI: Mapper loaded [ 0.371368] PCI: Using ACPI for IRQ routing [ 0.371501] NetLabel: Initializing [ 0.371503] NetLabel: domain hash size = 128 [ 0.371504] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.371515] NetLabel: unlabeled traffic allowed by default [ 0.372879] AppArmor: AppArmor Filesystem Enabled [ 0.372898] pnp: PnP ACPI init [ 0.372913] ACPI: bus type pnp registered [ 0.376345] pnp: PnP ACPI: found 13 devices [ 0.376347] ACPI: ACPI bus type pnp unregistered [ 0.376357] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.376359] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.376361] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.376363] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.376365] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.376367] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.376370] system 00:01: iomem range 0xb0000000-0xbfffffff has been reserved [ 0.376374] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.376376] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.376378] system 00:02: ioport range 0x295-0x314 has been reserved [ 0.376380] system 00:02: ioport range 0x290-0x294 has been reserved [ 0.376385] system 00:0b: iomem range 0xe0000000-0xe7ffffff has been reserved [ 0.376389] system 00:0c: iomem range 0xd0000-0xd3fff has been reserved [ 0.376391] system 00:0c: iomem range 0xd5800-0xd7fff has been reserved [ 0.376393] system 00:0c: iomem range 0xf0000-0xfbfff could not be reserved [ 0.376395] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved [ 0.376397] system 00:0c: iomem range 0xafff0000-0xafffffff could not be reserved [ 0.376400] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved [ 0.376402] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.376404] system 00:0c: iomem range 0x100000-0xaffeffff could not be reserved [ 0.376406] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.376408] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.381093] Switching to clocksource acpi_pm [ 0.381219] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01 [ 0.381219] pci 0000:00:06.0: IO window: 0x9000-0x9fff [ 0.381219] pci 0000:00:06.0: MEM window: disabled [ 0.381219] pci 0000:00:06.0: PREFETCH window: disabled [ 0.381219] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 0.381219] pci 0000:00:0a.0: IO window: disabled [ 0.381219] pci 0000:00:0a.0: MEM window: 0xeb000000-0xedffffff [ 0.381219] pci 0000:00:0a.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.381219] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:03 [ 0.381219] pci 0000:00:0f.0: IO window: disabled [ 0.381219] pci 0000:00:0f.0: MEM window: 0xe8000000-0xeaffffff [ 0.381219] pci 0000:00:0f.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.381219] pci 0000:00:06.0: setting latency timer to 64 [ 0.381219] pci 0000:00:0a.0: setting latency timer to 64 [ 0.381219] pci 0000:00:0f.0: setting latency timer to 64 [ 0.381219] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.381219] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.381219] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] [ 0.381219] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.381219] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.381219] pci_bus 0000:02: resource 1 mem: [0xeb000000-0xedffffff] [ 0.381219] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xcfffffff] [ 0.381219] pci_bus 0000:03: resource 1 mem: [0xe8000000-0xeaffffff] [ 0.381219] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.381219] NET: Registered protocol family 2 [ 0.381219] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.381781] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.387479] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.388141] TCP: Hash tables configured (established 524288 bind 65536) [ 0.388143] TCP reno registered [ 0.388259] NET: Registered protocol family 1 [ 0.430116] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.430177] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.430238] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.430300] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.430366] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.430443] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.430528] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.430621] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.430651] pci 0000:03:00.0: Boot video device [ 0.430815] PCI-DMA: Disabling AGP. [ 0.430926] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.430927] PCI-DMA: using GART IOMMU. [ 0.430931] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.431576] Scanning for low memory corruption every 60 seconds [ 0.431709] audit: initializing netlink socket (disabled) [ 0.431720] type=2000 audit(1276609509.431:1): initialized [ 0.437991] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.438979] VFS: Disk quotas dquot_6.5.2 [ 0.439020] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.439503] fuse init (API version 7.13) [ 0.439564] msgmni has been set to 7898 [ 0.439766] alg: No test for stdrng (krng) [ 0.439817] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.439819] io scheduler noop registered [ 0.439820] io scheduler anticipatory registered [ 0.439822] io scheduler deadline registered [ 0.439848] io scheduler cfq registered (default) [ 0.440055] alloc irq_desc for 24 on node 0 [ 0.440057] alloc kstat_irqs on node 0 [ 0.440066] pcieport 0000:00:0a.0: irq 24 for MSI/MSI-X [ 0.440073] pcieport 0000:00:0a.0: setting latency timer to 64 [ 0.440198] alloc irq_desc for 25 on node 0 [ 0.440199] alloc kstat_irqs on node 0 [ 0.440204] pcieport 0000:00:0f.0: irq 25 for MSI/MSI-X [ 0.440209] pcieport 0000:00:0f.0: setting latency timer to 64 [ 0.440268] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.440285] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.440377] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.440380] ACPI: Power Button [PWRB] [ 0.440430] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.440432] ACPI: Power Button [PWRF] [ 0.440772] processor LNXCPU:00: registered as cooling_device0 [ 0.440800] processor LNXCPU:01: registered as cooling_device1 [ 0.444678] hpet_acpi_add: no address or irqs in _CRS [ 0.444691] Linux agpgart interface v0.103 [ 0.444723] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.444844] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.445105] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.445859] brd: module loaded [ 0.446193] loop: module loaded [ 0.446269] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.446530] pata_acpi 0000:00:04.0: setting latency timer to 64 [ 0.446854] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.446859] alloc irq_desc for 23 on node 0 [ 0.446861] alloc kstat_irqs on node 0 [ 0.446867] pata_acpi 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.446896] pata_acpi 0000:00:05.0: setting latency timer to 64 [ 0.446904] pata_acpi 0000:00:05.0: PCI INT A disabled [ 0.447145] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 0.447147] alloc irq_desc for 22 on node 0 [ 0.447148] alloc kstat_irqs on node 0 [ 0.447151] pata_acpi 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 0.447167] pata_acpi 0000:00:05.1: setting latency timer to 64 [ 0.447173] pata_acpi 0000:00:05.1: PCI INT B disabled [ 0.447411] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21 [ 0.447413] alloc irq_desc for 21 on node 0 [ 0.447414] alloc kstat_irqs on node 0 [ 0.447417] pata_acpi 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 0.447440] pata_acpi 0000:00:05.2: setting latency timer to 64 [ 0.447447] pata_acpi 0000:00:05.2: PCI INT C disabled [ 0.447752] Fixed MDIO Bus: probed [ 0.447777] PPP generic driver version 2.4.2 [ 0.447828] tun: Universal TUN/TAP device driver, 1.6 [ 0.447830] tun: (C) 1999-2004 Max Krasnyansky [ 0.447911] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.448165] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 [ 0.448167] alloc irq_desc for 20 on node 0 [ 0.448169] alloc kstat_irqs on node 0 [ 0.448172] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 20 (level, low) -> IRQ 20 [ 0.448198] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.448201] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.448227] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.448256] ehci_hcd 0000:00:02.1: debug port 1 [ 0.448264] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.448287] ehci_hcd 0000:00:02.1: irq 20, io mem 0xee008000 [ 0.470028] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 0.470096] usb usb1: configuration #1 chosen from 1 choice [ 0.470118] hub 1-0:1.0: USB hub found [ 0.470125] hub 1-0:1.0: 10 ports detected [ 0.470191] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.470480] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 0.470484] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23 [ 0.470497] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.470499] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.470529] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.470552] ohci_hcd 0000:00:02.0: irq 23, io mem 0xee004000 [ 0.532072] usb usb2: configuration #1 chosen from 1 choice [ 0.532090] hub 2-0:1.0: USB hub found [ 0.532098] hub 2-0:1.0: 10 ports detected [ 0.532152] uhci_hcd: USB Universal Host Controller Interface driver [ 0.532219] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.532221] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.532346] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.532411] mice: PS/2 mouse device common for all mice [ 0.532490] rtc_cmos 00:05: RTC can wake from S4 [ 0.532528] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.532556] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.532659] device-mapper: uevent: version 1.0.3 [ 0.532788] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.532853] device-mapper: multipath: version 1.1.0 loaded [ 0.532856] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.532998] cpuidle: using governor ladder [ 0.532999] cpuidle: using governor menu [ 0.533283] TCP cubic registered [ 0.533391] NET: Registered protocol family 10 [ 0.533781] lo: Disabled Privacy Extensions [ 0.534000] NET: Registered protocol family 17 [ 0.534034] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00) [ 0.534043] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 0.534044] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 0.534131] PM: Resume from disk failed. [ 0.534147] registered taskstats version 1 [ 0.534499] Magic number: 14:739:786 [ 0.534614] rtc_cmos 00:05: setting system clock to 2010-06-15 13:45:09 UTC (1276609509) [ 0.534617] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.534618] EDD information not available. [ 0.550649] Freeing initrd memory: 13719k freed [ 0.551356] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.557369] Freeing unused kernel memory: 876k freed [ 0.557739] Write protecting the kernel read-only data: 7680k [ 0.576182] udev: starting version 151 [ 0.634157] vga16fb: initializing [ 0.634164] vga16fb: mapped to 0xffff8800000a0000 [ 0.634217] fb0: VGA16 VGA frame buffer device [ 0.640661] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 0.640977] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 0.640982] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 0.640986] forcedeth 0000:00:08.0: setting latency timer to 64 [ 0.641062] nv_probe: set workaround bit for reversed mac addr [ 0.791290] usb 1-8: new high speed USB device using ehci_hcd and address 2 [ 0.933857] Console: switching to colour frame buffer device 80x30 [ 0.970795] usb 1-8: configuration #1 chosen from 1 choice [ 0.971013] hub 1-8:1.0: USB hub found [ 0.971078] hub 1-8:1.0: 4 ports detected [ 1.170708] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1d:7d:91:74:55 [ 1.170711] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3 [ 1.170783] sata_nv 0000:00:05.0: version 3.5 [ 1.170795] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 1.170797] sata_nv 0000:00:05.0: Using SWNCQ mode [ 1.170874] sata_nv 0000:00:05.0: setting latency timer to 64 [ 1.170973] scsi0 : sata_nv [ 1.171234] scsi1 : sata_nv [ 1.171394] ata1: SATA max UDMA/133 cmd 0xac00 ctl 0xb000 bmdma 0xbc00 irq 23 [ 1.171396] ata2: SATA max UDMA/133 cmd 0xb400 ctl 0xb800 bmdma 0xbc08 irq 23 [ 1.171475] pata_amd 0000:00:04.0: version 0.4.1 [ 1.171510] pata_amd 0000:00:04.0: setting latency timer to 64 [ 1.171584] scsi2 : pata_amd [ 1.171649] scsi3 : pata_amd [ 1.172142] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.172144] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.172348] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22 [ 1.172350] sata_nv 0000:00:05.1: Using SWNCQ mode [ 1.172395] sata_nv 0000:00:05.1: setting latency timer to 64 [ 1.172512] scsi4 : sata_nv [ 1.172580] scsi5 : sata_nv [ 1.172710] ata5: SATA max UDMA/133 cmd 0xc000 ctl 0xc400 bmdma 0xd000 irq 22 [ 1.172712] ata6: SATA max UDMA/133 cmd 0xc800 ctl 0xcc00 bmdma 0xd008 irq 22 [ 1.172791] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21 [ 1.172793] sata_nv 0000:00:05.2: Using SWNCQ mode [ 1.172832] sata_nv 0000:00:05.2: setting latency timer to 64 [ 1.172955] scsi6 : sata_nv [ 1.173028] scsi7 : sata_nv [ 1.173143] ata7: SATA max UDMA/133 cmd 0xd400 ctl 0xd800 bmdma 0xe400 irq 21 [ 1.173145] ata8: SATA max UDMA/133 cmd 0xdc00 ctl 0xe000 bmdma 0xe408 irq 21 [ 1.350377] ata3.00: ATAPI: PIONEER DVD-RW DVR-112D, 1.15, max UDMA/66 [ 1.350394] ata3: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13) [ 1.390315] ata3.00: configured for UDMA/66 [ 1.490020] usb 2-9: new full speed USB device using ohci_hcd and address 2 [ 1.510674] ata7: SATA link down (SStatus 0 SControl 300) [ 1.521330] ata1: SATA link down (SStatus 0 SControl 300) [ 1.521346] ata5: SATA link down (SStatus 0 SControl 300) [ 1.726130] usb 2-9: configuration #1 chosen from 1 choice [ 1.737220] usbcore: registered new interface driver hiddev [ 1.737273] usbcore: registered new interface driver usbhid [ 1.737275] usbhid: v2.6:USB HID core driver [ 2.010049] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.060020] usb 2-10: new low speed USB device using ohci_hcd and address 3 [ 2.170198] ata2.00: HPA unlocked: 312579695 -> 312581808, native 312581808 [ 2.170203] ata2.00: ATA-8: ST3160813AS, CC2F, max UDMA/133 [ 2.170204] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.237590] ata2.00: configured for UDMA/133 [ 2.237681] scsi 1:0:0:0: Direct-Access ATA ST3160813AS CC2F PQ: 0 ANSI: 5 [ 2.237838] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 2.237851] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.238015] sd 1:0:0:0: [sda] Write Protect is off [ 2.238018] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.238038] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.238571] sda: [ 2.243529] scsi 2:0:0:0: CD-ROM PIONEER DVD-RW DVR-112D 1.15 PQ: 0 ANSI: 5 [ 2.261803] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 2.261805] Uniform CD-ROM driver Revision: 3.20 [ 2.261896] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.261949] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 2.262027] ata4: port disabled. ignoring. [ 2.262472] sda1 sda2 sda3 sda4 [ 2.285057] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.290123] usb 2-10: configuration #1 chosen from 1 choice [ 2.300307] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:02.0/usb2/2-10/2-10:1.0/input/input4 [ 2.300399] generic-usb 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:02.0-10/input0 [ 2.600671] ata6: SATA link down (SStatus 0 SControl 300) [ 2.940673] ata8: SATA link down (SStatus 0 SControl 300) [ 3.305404] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 11.903847] udev: starting version 151 [ 11.950013] Adding 2963984k swap on /dev/sda4. Priority:-1 extents:1 across:2963984k [ 11.982603] udev: renamed network interface eth0 to eth4 [ 11.995194] i2c i2c-0: nForce2 SMBus adapter at 0x1c00 [ 11.995213] i2c i2c-1: nForce2 SMBus adapter at 0x1c80 [ 12.004570] lp: driver loaded but no devices found [ 12.044237] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 12.125957] type=1505 audit(1276609521.086:2): operation="profile_load" pid=656 name="/sbin/dhclient3" [ 12.126147] type=1505 audit(1276609521.086:3): operation="profile_load" pid=656 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 12.126253] type=1505 audit(1276609521.086:4): operation="profile_load" pid=656 name="/usr/lib/connman/scripts/dhclient-script" [ 12.196069] nvidia: module license 'NVIDIA' taints kernel. [ 12.196074] Disabling lock debugging due to kernel taint [ 12.490681] parport_pc 00:09: reported by Plug and Play ACPI [ 12.490750] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 12.499421] EDAC MC: Ver: 2.1.0 Jun 3 2010 [ 12.504212] EDAC amd64_edac: Ver: 3.2.0 Jun 3 2010 [ 12.504288] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 12.504295] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 12.504296] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 12.504297] (Note that use of the override may cause unknown side effects.) [ 12.504313] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 12.519236] ppdev: user-space parallel port driver [ 12.585129] lp0: using parport0 (interrupt-driven). [ 12.598805] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 [ 12.598811] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21 [ 12.598814] hda_intel: Disable MSI for Nvidia chipset [ 12.598980] HDA Intel 0000:00:06.1: setting latency timer to 64 [ 12.599270] input: Wacom Bamboo 4x5 Pen as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.0/input/input5 [ 12.638106] input: Wacom Bamboo 4x5 Finger as /devices/pci0000:00/0000:00:02.0/usb2/2-9/2-9:1.1/input/input6 [ 12.656064] usbcore: registered new interface driver wacom [ 12.656066] wacom: v1.52-pc-0.1:USB Wacom tablet driver [ 12.726958] nvidia 0000:02:00.0: enabling device (0000 -> 0002) [ 12.727234] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 12.727238] alloc irq_desc for 16 on node 0 [ 12.727240] alloc kstat_irqs on node 0 [ 12.727246] nvidia 0000:02:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16 [ 12.727255] nvidia 0000:02:00.0: setting latency timer to 64 [ 12.727259] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none [ 12.727784] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16 [ 12.727788] nvidia 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16 [ 12.727794] nvidia 0000:03:00.0: setting latency timer to 64 [ 12.727797] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 12.728164] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.24 Thu Apr 22 19:10:14 PDT 2010 [ 13.178910] EXT4-fs (sda2): barriers disabled [ 13.189150] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 13.685795] kjournald starting. Commit interval 5 seconds [ 13.686189] EXT3 FS on sda3, internal journal [ 13.686197] EXT3-fs: mounted filesystem with ordered data mode. [ 13.783904] type=1505 audit(1276609522.745:5): operation="profile_load" pid=1002 name="/usr/share/gdm/guest-session/Xsession" [ 13.785962] type=1505 audit(1276609522.745:6): operation="profile_replace" pid=1003 name="/sbin/dhclient3" [ 13.786160] type=1505 audit(1276609522.745:7): operation="profile_replace" pid=1003 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.786270] type=1505 audit(1276609522.745:8): operation="profile_replace" pid=1003 name="/usr/lib/connman/scripts/dhclient-script" [ 13.789607] type=1505 audit(1276609522.745:9): operation="profile_load" pid=1004 name="/usr/bin/evince" [ 13.792797] type=1505 audit(1276609522.755:10): operation="profile_load" pid=1004 name="/usr/bin/evince-previewer" [ 13.794404] type=1505 audit(1276609522.755:11): operation="profile_load" pid=1004 name="/usr/bin/evince-thumbnailer" [ 13.840044] alloc irq_desc for 26 on node 0 [ 13.840047] alloc kstat_irqs on node 0 [ 13.840057] forcedeth 0000:00:08.0: irq 26 for MSI/MSI-X [ 14.070119] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:06.1/input/input7