[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #31-Ubuntu SMP Tue Apr 13 20:34:00 UTC 2010 (Ubuntu 2.6.32-21.31-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000abfd0000 (usable) [ 0.000000] BIOS-e820: 00000000abfd0000 - 00000000abfde000 (ACPI data) [ 0.000000] BIOS-e820: 00000000abfde000 - 00000000ac000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xabfd0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FE0000000 write-back [ 0.000000] 2 base 0A0000000 mask FF8000000 write-back [ 0.000000] 3 base 0A8000000 mask FFC000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000abfd0000 (usable) [ 0.000000] modified: 00000000abfd0000 - 00000000abfde000 (ACPI data) [ 0.000000] modified: 00000000abfde000 - 00000000ac000000 (ACPI NVS) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 3777f000 - 37fefbcd [ 0.000000] Allocated new RAMDISK: 008de000 - 0114ebcd [ 0.000000] Move RAMDISK from 000000003777f000 - 0000000037fefbcc to 008de000 - 0114ebcc [ 0.000000] ACPI: RSDP 000faaa0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT abfd0100 00044 (v01 A M I OEMXSDT 08000617 MSFT 00000097) [ 0.000000] ACPI: FACP abfd0290 000F4 (v03 A M I OEMFACP 08000617 MSFT 00000097) [ 0.000000] ACPI: DSDT abfd0440 03DB5 (v01 A0259 A0259001 00000001 INTL 02002026) [ 0.000000] ACPI: FACS abfde000 00040 [ 0.000000] ACPI: APIC abfd0390 00068 (v01 A M I OEMAPIC 08000617 MSFT 00000097) [ 0.000000] ACPI: MCFG abfd0400 0003C (v01 A M I OEMMCFG 08000617 MSFT 00000097) [ 0.000000] ACPI: OEMB abfde040 00046 (v01 A M I AMI_OEM 08000617 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1863MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd234] BRK ==> [00008da000 - 00008dd234] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008de000 - 000114ebcd] NEW RAMDISK ==> [00008de000 - 000114ebcd] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000abfd0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000abfd0 [ 0.000000] On node 0 totalpages: 704351 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1150200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 3728 pages used for memmap [ 0.000000] HighMem zone: 473410 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 48 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at ac000000 (gap: ac000000:52c00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s36024 r0 d21320 u2097152 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 698847 [ 0.000000] Kernel command line: root=UUID=82e29357-9603-403e-86ed-b37dcc794d6b ro ipv6.disable=1 quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 14088960 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000abfd0) [ 0.000000] Memory: 2763072k/2817856k available (4673k kernel code, 53448k reserved, 2122k data, 656k init, 1908552k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:512 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2999.811 MHz processor. [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.62 BogoMIPS (lpj=11999244) [ 0.004031] Security Framework initialized [ 0.004059] AppArmor: AppArmor initialized [ 0.004071] Mount-cache hash table entries: 512 [ 0.004255] Initializing cgroup subsys ns [ 0.004262] Initializing cgroup subsys cpuacct [ 0.004267] Initializing cgroup subsys memory [ 0.004277] Initializing cgroup subsys devices [ 0.004281] Initializing cgroup subsys freezer [ 0.004284] Initializing cgroup subsys net_cls [ 0.004320] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.004325] CPU: L2 cache: 1024K [ 0.004328] CPU: Physical Processor ID: 0 [ 0.004331] CPU: Processor Core ID: 0 [ 0.004336] mce: CPU supports 4 MCE banks [ 0.004351] CPU0: Thermal monitoring enabled (TM1) [ 0.004359] using mwait in idle threads. [ 0.004368] Performance Events: no PMU driver, software events only. [ 0.004378] Checking 'hlt' instruction... OK. [ 0.024290] ACPI: Core revision 20090903 [ 0.036016] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.036023] ftrace: allocating 21771 entries in 43 pages [ 0.040091] Enabling APIC mode: Flat. Using 2 I/O APICs [ 0.041271] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.086699] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 [ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.008000] CPU: L2 cache: 1024K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 0 [ 0.008000] CPU1: Thermal monitoring enabled (TM1) [ 0.172120] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03 [ 0.172143] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.176031] Brought up 2 CPUs [ 0.176037] Total of 2 processors activated (12000.27 BogoMIPS). [ 0.176605] CPU0 attaching sched-domain: [ 0.176613] domain 0: span 0-1 level SIBLING [ 0.176617] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.176626] domain 1: span 0-1 level MC [ 0.176630] groups: 0-1 (cpu_power = 1178) [ 0.176640] CPU1 attaching sched-domain: [ 0.176643] domain 0: span 0-1 level SIBLING [ 0.176646] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.176654] domain 1: span 0-1 level MC [ 0.176657] groups: 0-1 (cpu_power = 1178) [ 0.176829] devtmpfs: initialized [ 0.176829] regulator: core version 0.5 [ 0.176829] Time: 14:43:52 Date: 04/15/10 [ 0.176829] NET: Registered protocol family 16 [ 0.176829] Trying to unpack rootfs image as initramfs... [ 0.176829] EISA bus registered [ 0.176829] ACPI: bus type pci registered [ 0.176829] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.176829] PCI: Not using MMCONFIG. [ 0.176829] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2 [ 0.176829] PCI: Using configuration type 1 for base access [ 0.180698] bio: create slab at 0 [ 0.182123] ACPI: EC: Look up EC in DSDT [ 0.187284] ACPI: Executed 1 blocks of module-level executable AML code [ 0.196730] ACPI: Interpreter enabled [ 0.196750] ACPI: (supports S0 S1 S3 S4 S5) [ 0.196802] ACPI: Using IOAPIC for interrupt routing [ 0.196908] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.203301] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.203307] PCI: Using MMCONFIG for extended config space [ 0.217957] ACPI Warning: Incorrect checksum in table [OEMB] - 69, should be 5F (20090903/tbutils-314) [ 0.218218] ACPI: No dock devices found. [ 0.218456] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.218546] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.219109] pci 0000:00:01.0: supports D1 [ 0.219206] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.219215] pci 0000:00:02.0: PME# disabled [ 0.219274] pci 0000:00:0a.0: reg 10 32bit mmio pref: [0xaffff000-0xafffffff] [ 0.219353] pci 0000:00:0a.1: reg 10 32bit mmio pref: [0xafffe000-0xafffefff] [ 0.219460] pci 0000:00:0b.0: reg 10 io port: [0xc800-0xc8ff] [ 0.219472] pci 0000:00:0b.0: reg 14 32bit mmio: [0xfb8ffc00-0xfb8ffcff] [ 0.219510] pci 0000:00:0b.0: reg 30 32bit mmio pref: [0xfb8c0000-0xfb8dffff] [ 0.219539] pci 0000:00:0b.0: supports D1 D2 [ 0.219544] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot D3cold [ 0.219551] pci 0000:00:0b.0: PME# disabled [ 0.219609] pci 0000:00:0f.0: reg 10 io port: [0xcc00-0xcc07] [ 0.219621] pci 0000:00:0f.0: reg 14 io port: [0xc480-0xc483] [ 0.219633] pci 0000:00:0f.0: reg 18 io port: [0xc400-0xc407] [ 0.219645] pci 0000:00:0f.0: reg 1c io port: [0xc080-0xc083] [ 0.219657] pci 0000:00:0f.0: reg 20 io port: [0xc000-0xc00f] [ 0.219668] pci 0000:00:0f.0: reg 24 io port: [0xb800-0xb8ff] [ 0.219792] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f] [ 0.219923] pci 0000:00:10.0: reg 20 io port: [0xbc00-0xbc1f] [ 0.219965] pci 0000:00:10.0: supports D1 D2 [ 0.219969] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.219977] pci 0000:00:10.0: PME# disabled [ 0.220082] pci 0000:00:10.1: reg 20 io port: [0xb480-0xb49f] [ 0.220124] pci 0000:00:10.1: supports D1 D2 [ 0.220129] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.220137] pci 0000:00:10.1: PME# disabled [ 0.220214] pci 0000:00:10.2: reg 20 io port: [0xb400-0xb41f] [ 0.220256] pci 0000:00:10.2: supports D1 D2 [ 0.220261] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.220268] pci 0000:00:10.2: PME# disabled [ 0.220352] pci 0000:00:10.3: reg 20 io port: [0xb080-0xb09f] [ 0.220395] pci 0000:00:10.3: supports D1 D2 [ 0.220400] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.220407] pci 0000:00:10.3: PME# disabled [ 0.220460] pci 0000:00:10.4: reg 10 32bit mmio: [0xfb8ff800-0xfb8ff8ff] [ 0.220527] pci 0000:00:10.4: supports D1 D2 [ 0.220532] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.220539] pci 0000:00:10.4: PME# disabled [ 0.220639] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.220650] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices [ 0.220735] pci 0000:00:11.5: reg 10 io port: [0xa800-0xa8ff] [ 0.220804] pci 0000:00:11.5: supports D1 D2 [ 0.220856] pci 0000:00:11.6: reg 10 io port: [0x00-0xff] [ 0.221025] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff] [ 0.221037] pci 0000:01:00.0: reg 14 io port: [0xd800-0xd8ff] [ 0.221048] pci 0000:01:00.0: reg 18 32bit mmio: [0xfb9f0000-0xfb9fffff] [ 0.221076] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfb9c0000-0xfb9dffff] [ 0.221110] pci 0000:01:00.0: supports D1 D2 [ 0.221157] pci 0000:01:00.1: reg 10 32bit mmio pref: [0xb0000000-0xbfffffff] [ 0.221168] pci 0000:01:00.1: reg 14 32bit mmio: [0xfb9e0000-0xfb9effff] [ 0.221221] pci 0000:01:00.1: supports D1 D2 [ 0.221294] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] [ 0.221302] pci 0000:00:01.0: bridge 32bit mmio: [0xfb900000-0xfb9fffff] [ 0.221311] pci 0000:00:01.0: bridge 32bit mmio pref: [0xb0000000-0xcfffffff] [ 0.221366] pci 0000:02:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.221378] pci 0000:02:00.0: reg 14 io port: [0xe800-0xe8ff] [ 0.221390] pci 0000:02:00.0: reg 18 32bit mmio: [0xfbe00000-0xfbe0ffff] [ 0.221422] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfbde0000-0xfbdfffff] [ 0.221460] pci 0000:02:00.0: supports D1 D2 [ 0.221520] pci 0000:02:00.1: reg 10 32bit mmio: [0xfba00000-0xfba0ffff] [ 0.221600] pci 0000:02:00.1: supports D1 D2 [ 0.221688] pci 0000:00:02.0: bridge io port: [0xe000-0xefff] [ 0.221696] pci 0000:00:02.0: bridge 32bit mmio: [0xfba00000-0xfbffffff] [ 0.221704] pci 0000:00:02.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff] [ 0.221725] pci_bus 0000:00: on NUMA node 0 [ 0.221735] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.222187] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] [ 0.250356] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.250554] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.250762] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.250957] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.251155] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.251349] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.251560] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.251766] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.251991] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.252019] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none [ 0.252028] vgaarb: loaded [ 0.252284] SCSI subsystem initialized [ 0.252451] libata version 3.00 loaded. [ 0.252619] usbcore: registered new interface driver usbfs [ 0.252646] usbcore: registered new interface driver hub [ 0.252705] usbcore: registered new device driver usb [ 0.252997] ACPI: WMI: Mapper loaded [ 0.253002] PCI: Using ACPI for IRQ routing [ 0.253348] NetLabel: Initializing [ 0.253353] NetLabel: domain hash size = 128 [ 0.253356] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.253382] NetLabel: unlabeled traffic allowed by default [ 0.253457] Switching to clocksource tsc [ 0.255899] AppArmor: AppArmor Filesystem Enabled [ 0.255929] pnp: PnP ACPI init [ 0.255959] ACPI: bus type pnp registered [ 0.258886] pnp 00:07: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.258894] pnp 00:07: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.258900] pnp 00:07: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.258907] pnp 00:07: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.258914] pnp 00:07: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.258920] pnp 00:07: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.258926] pnp 00:07: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.258933] pnp 00:07: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.258939] pnp 00:07: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.258946] pnp 00:07: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.258952] pnp 00:07: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.258959] pnp 00:07: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.258965] pnp 00:07: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling [ 0.263116] pnp: PnP ACPI: found 14 devices [ 0.263122] ACPI: ACPI bus type pnp unregistered [ 0.263130] PnPBIOS: Disabled by ACPI PNP [ 0.263158] system 00:06: ioport range 0x290-0x297 has been reserved [ 0.263175] system 00:07: ioport range 0x3e0-0x3e7 has been reserved [ 0.263181] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.263187] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.263193] system 00:07: ioport range 0x400-0x41f has been reserved [ 0.263210] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.263217] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.263233] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.263248] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.263255] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved [ 0.263261] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.263267] system 00:0d: iomem range 0x100000-0xabffffff could not be reserved [ 0.263274] system 00:0d: iomem range 0xfff80000-0xffffffff has been reserved [ 0.298242] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.298250] pci 0000:00:01.0: IO window: 0xd000-0xdfff [ 0.298259] pci 0000:00:01.0: MEM window: 0xfb900000-0xfb9fffff [ 0.298268] pci 0000:00:01.0: PREFETCH window: 0xb0000000-0xcfffffff [ 0.298280] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 [ 0.298286] pci 0000:00:02.0: IO window: 0xe000-0xefff [ 0.298295] pci 0000:00:02.0: MEM window: 0xfba00000-0xfbffffff [ 0.298303] pci 0000:00:02.0: PREFETCH window: 0xf0000000-0xf7ffffff [ 0.298330] pci 0000:00:01.0: setting latency timer to 64 [ 0.298350] alloc irq_desc for 27 on node -1 [ 0.298355] alloc kstat_irqs on node -1 [ 0.298367] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27 [ 0.298375] pci 0000:00:02.0: setting latency timer to 64 [ 0.298384] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.298389] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.298395] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.298400] pci_bus 0000:01: resource 1 mem: [0xfb900000-0xfb9fffff] [ 0.298406] pci_bus 0000:01: resource 2 pref mem [0xb0000000-0xcfffffff] [ 0.298411] pci_bus 0000:02: resource 0 io: [0xe000-0xefff] [ 0.298416] pci_bus 0000:02: resource 1 mem: [0xfba00000-0xfbffffff] [ 0.298422] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf7ffffff] [ 0.298497] NET: Registered protocol family 2 [ 0.298694] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.299375] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.300062] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.300483] TCP: Hash tables configured (established 131072 bind 65536) [ 0.300489] TCP reno registered [ 0.300687] NET: Registered protocol family 1 [ 0.300743] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.326234] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message [ 0.326259] pci 0000:01:00.0: Boot video device [ 0.326604] cpufreq-nforce2: No nForce2 chipset. [ 0.326673] Scanning for low memory corruption every 60 seconds [ 0.326884] audit: initializing netlink socket (disabled) [ 0.326905] type=2000 audit(1271342625.326:1): initialized [ 0.339390] highmem bounce pool size: 64 pages [ 0.339402] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.342615] VFS: Disk quotas dquot_6.5.2 [ 0.342745] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.344019] fuse init (API version 7.13) [ 0.344194] msgmni has been set to 1670 [ 0.344638] alg: No test for stdrng (krng) [ 0.344755] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.344761] io scheduler noop registered [ 0.344765] io scheduler anticipatory registered [ 0.344769] io scheduler deadline registered [ 0.344855] io scheduler cfq registered (default) [ 0.345182] alloc irq_desc for 48 on node -1 [ 0.345188] alloc kstat_irqs on node -1 [ 0.345207] pcieport 0000:00:02.0: irq 48 for MSI/MSI-X [ 0.345222] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.345416] aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support [ 0.345438] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.345545] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.345757] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.345770] ACPI: Sleep Button [SLPB] [ 0.345857] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.345863] ACPI: Power Button [PWRB] [ 0.345954] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.345960] ACPI: Power Button [PWRF] [ 0.346899] processor LNXCPU:00: registered as cooling_device0 [ 0.347208] processor LNXCPU:01: registered as cooling_device1 [ 0.356112] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.356302] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.356884] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.359228] brd: module loaded [ 0.360241] loop: module loaded [ 0.360432] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.360761] alloc irq_desc for 20 on node -1 [ 0.360766] alloc kstat_irqs on node -1 [ 0.360778] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.360847] pata_acpi 0000:00:0f.0: PCI INT B disabled [ 0.360876] pata_acpi 0000:00:0f.1: can't derive routing for PCI INT A [ 0.360918] pata_acpi 0000:00:0f.1: can't derive routing for PCI INT A [ 0.361605] Fixed MDIO Bus: probed [ 0.361684] PPP generic driver version 2.4.2 [ 0.361779] tun: Universal TUN/TAP device driver, 1.6 [ 0.361784] tun: (C) 1999-2004 Max Krasnyansky [ 0.361963] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.362004] alloc irq_desc for 21 on node -1 [ 0.362008] alloc kstat_irqs on node -1 [ 0.362019] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.362049] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 0.362121] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 0.362228] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfb8ff800 [ 0.362318] isapnp: Scanning for PnP cards... [ 0.374850] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 0.375064] usb usb1: configuration #1 chosen from 1 choice [ 0.375120] hub 1-0:1.0: USB hub found [ 0.375136] hub 1-0:1.0: 8 ports detected [ 0.375254] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.375291] uhci_hcd: USB Universal Host Controller Interface driver [ 0.375365] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.375379] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.375445] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.375479] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000bc00 [ 0.375638] usb usb2: configuration #1 chosen from 1 choice [ 0.375687] hub 2-0:1.0: USB hub found [ 0.375699] hub 2-0:1.0: 2 ports detected [ 0.375785] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.375795] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.375864] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.375892] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b480 [ 0.376043] usb usb3: configuration #1 chosen from 1 choice [ 0.376094] hub 3-0:1.0: USB hub found [ 0.376107] hub 3-0:1.0: 2 ports detected [ 0.376187] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.376196] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.376251] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.376279] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b400 [ 0.376427] usb usb4: configuration #1 chosen from 1 choice [ 0.376477] hub 4-0:1.0: USB hub found [ 0.376489] hub 4-0:1.0: 2 ports detected [ 0.376563] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.376573] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 0.376634] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 0.376661] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000b080 [ 0.376822] usb usb5: configuration #1 chosen from 1 choice [ 0.376869] hub 5-0:1.0: USB hub found [ 0.376880] hub 5-0:1.0: 2 ports detected [ 0.377049] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.377599] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.377611] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.377765] mice: PS/2 mouse device common for all mice [ 0.377977] rtc_cmos 00:02: RTC can wake from S4 [ 0.378043] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.378102] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.378317] device-mapper: uevent: version 1.0.3 [ 0.422975] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.466906] device-mapper: multipath: version 1.1.0 loaded [ 0.466914] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.474739] EISA: Probing bus 0 at eisa.0 [ 0.474751] Cannot allocate resource for EISA slot 1 [ 0.474792] EISA: Detected 0 cards. [ 0.482831] cpuidle: using governor ladder [ 0.482836] cpuidle: using governor menu [ 0.483764] TCP cubic registered [ 0.483769] IPv6: Loaded, but administratively disabled, reboot required to enable [ 0.483775] NET: Registered protocol family 17 [ 0.483868] Using IPI No-Shortcut mode [ 0.484029] PM: Resume from disk failed. [ 0.484060] registered taskstats version 1 [ 0.484638] Magic number: 6:283:738 [ 0.484772] rtc_cmos 00:02: setting system clock to 2010-04-15 14:43:52 UTC (1271342632) [ 0.484777] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.484781] EDD information not available. [ 0.526855] Freeing initrd memory: 8642k freed [ 0.546099] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.716820] isapnp: No Plug & Play device found [ 0.716847] Freeing unused kernel memory: 656k freed [ 0.717520] Write protecting the kernel text: 4676k [ 0.717589] Write protecting the kernel read-only data: 1840k [ 0.751991] ramzswap: disk size set to 1386628 kB [ 0.761779] udev: starting version 151 [ 0.825270] Adding 1386624k swap on /dev/ramzswap0. Priority:100 extents:1 across:1386624k SS [ 1.019194] Linux agpgart interface v0.103 [ 1.024262] usb 1-8: new high speed USB device using ehci_hcd and address 5 [ 1.031143] sata_via 0000:00:0f.0: version 2.4 [ 1.031166] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.031222] sata_via 0000:00:0f.0: routed to hard irq line 5 [ 1.038524] scsi0 : sata_via [ 1.038743] scsi1 : sata_via [ 1.041674] ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc480 bmdma 0xc000 irq 20 [ 1.041681] ata2: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 20 [ 1.041781] agpgart: Detected VIA PT880 Ultra chipset [ 1.057222] agpgart-via 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.079840] [drm] Initialized drm 1.1.0 20060810 [ 1.090113] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.090144] alloc irq_desc for 18 on node -1 [ 1.090148] alloc kstat_irqs on node -1 [ 1.090159] r8169 0000:00:0b.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.090195] r8169 0000:00:0b.0: no PCI Express capability [ 1.090750] eth0: RTL8110s at 0xf800cc00, 00:08:a1:89:7e:1b, XID 04000000 IRQ 18 [ 1.156466] usb 1-8: configuration #1 chosen from 1 choice [ 1.252028] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 1.388015] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 1.464015] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.636219] ata2.00: HPA unlocked: 488395055 -> 488397168, native 488397168 [ 1.636227] ata2.00: ATA-7: ST3250823AS, 3.03, max UDMA/133 [ 1.636232] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.652380] ata2.00: configured for UDMA/133 [ 1.652534] scsi 1:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5 [ 1.652762] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.652821] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 1.652865] sd 1:0:0:0: [sda] Write Protect is off [ 1.652871] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.652926] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.653273] sda: sda1 sda2 sda3 [ 1.704326] sd 1:0:0:0: [sda] Attached SCSI disk [ 1.755943] [drm] radeon kernel modesetting enabled. [ 1.756037] alloc irq_desc for 16 on node -1 [ 1.756041] alloc kstat_irqs on node -1 [ 1.756051] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.758420] [drm] radeon: Initializing kernel modesetting. [ 1.758577] [drm] register mmio base: 0xFB9F0000 [ 1.758581] [drm] register mmio size: 65536 [ 1.761089] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 1.761108] [drm] Generation 2 PCI interface, using max accessible memory [ 1.761119] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 1.761148] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode [ 1.761282] radeon 0000:01:00.0: putting AGP V3 device into 8x mode [ 1.761331] [drm] radeon: VRAM 256M [ 1.761336] [drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF [ 1.761339] [drm] radeon: GTT 256M [ 1.761343] [drm] radeon: GTT from 0xD0000000 to 0xDFFFFFFF [ 1.761411] [drm] radeon: irq initialized. [ 1.761884] [drm] Detected VRAM RAM=256M, BAR=256M [ 1.761891] [drm] RAM width 128bits DDR [ 1.762050] [TTM] Zone kernel: Available graphics memory: 432352 kiB. [ 1.762054] [TTM] Zone highmem: Available graphics memory: 1386628 kiB. [ 1.762077] [drm] radeon: 256M of VRAM memory ready [ 1.762080] [drm] radeon: 256M of GTT memory ready. [ 1.762328] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 1.762343] [drm] radeon: cp idle (0x10000C03) [ 1.762399] [drm] Loading R300 Microcode [ 1.762524] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 1.772265] [drm] radeon: ring at 0x00000000D0000000 [ 1.772289] [drm] ring test succeeded in 1 usecs [ 1.778323] [drm] radeon: ib pool ready. [ 1.778425] [drm] ib test succeeded in 0 usecs [ 1.778782] [drm] Default TV standard: PAL [ 1.778786] [drm] 27.000000000 MHz TV ref clk [ 1.778791] [drm] DFP table revision: 3 [ 1.779048] [drm] Default TV standard: PAL [ 1.779052] [drm] 27.000000000 MHz TV ref clk [ 1.779132] [drm] Radeon Display Connectors [ 1.779135] [drm] Connector 0: [ 1.779138] [drm] VGA [ 1.779141] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 1.779144] [drm] Encoders: [ 1.779146] [drm] CRT1: INTERNAL_DAC1 [ 1.779149] [drm] Connector 1: [ 1.779151] [drm] DVI-I [ 1.779153] [drm] HPD1 [ 1.779156] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 1.779158] [drm] Encoders: [ 1.779160] [drm] CRT2: INTERNAL_DAC2 [ 1.779162] [drm] DFP1: INTERNAL_TMDS1 [ 1.779165] [drm] Connector 2: [ 1.779167] [drm] S-video [ 1.779169] [drm] Encoders: [ 1.779171] [drm] TV1: INTERNAL_DAC2 [ 1.900281] [drm] 2: conflicting encoders switching off SVIDEO-1 [ 1.900286] [drm] in favor of DVI-I-1 [ 1.930086] [drm] fb mappable at 0xC0040000 [ 1.930092] [drm] vram apper at 0xC0000000 [ 1.930096] [drm] size 5242880 [ 1.930098] [drm] fb depth is 24 [ 1.930101] [drm] pitch is 5120 [ 1.930352] fb0: radeondrmfb frame buffer device [ 1.930356] registered panic notifier [ 1.930365] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0 [ 1.930406] radeon 0000:02:00.0: enabling device (0000 -> 0003) [ 1.930418] alloc irq_desc for 24 on node -1 [ 1.930421] alloc kstat_irqs on node -1 [ 1.930431] radeon 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 1.930440] radeon 0000:02:00.0: setting latency timer to 64 [ 1.932727] [drm] radeon: Initializing kernel modesetting. [ 1.932868] radeon 0000:02:00.0: PCI: Disallowing DAC for device [ 1.932872] radeon: No suitable DMA available. [ 1.932905] [drm] register mmio base: 0xFBE00000 [ 1.932909] [drm] register mmio size: 65536 [ 1.999305] [drm] GPU reset succeed (RBBM_STATUS=0x00000140) [ 1.999313] [drm] GPU not posted. posting now... [ 2.109133] [drm] Generation 2 PCI interface, using max accessible memory [ 2.109141] [drm] radeon: VRAM 128M [ 2.109144] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF [ 2.109147] [drm] radeon: GTT 512M [ 2.109150] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF [ 2.109221] alloc irq_desc for 49 on node -1 [ 2.109225] alloc kstat_irqs on node -1 [ 2.109244] radeon 0000:02:00.0: irq 49 for MSI/MSI-X [ 2.109254] [drm] radeon: using MSI. [ 2.109288] [drm] radeon: irq initialized. [ 2.109720] [drm] Detected VRAM RAM=128M, BAR=128M [ 2.109725] [drm] RAM width 64bits DDR [ 2.109745] [drm] radeon: 128M of VRAM memory ready [ 2.109748] [drm] radeon: 512M of GTT memory ready. [ 2.109753] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 2.110618] [drm] radeon: 1 quad pipes, 1 Z pipes initialized. [ 2.110673] [drm] PCIE GART of 512M enabled (table at 0x00040000). [ 2.110678] [drm] radeon: cp idle (0x10000C03) [ 2.110761] [drm] Loading R300 Microcode [ 2.111181] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin [ 2.114881] [drm] radeon: ring at 0x0000000020000000 [ 2.114906] [drm] ring test succeeded in 0 usecs [ 2.115287] [drm] radeon: ib pool ready. [ 2.115317] [drm] ib test succeeded in 0 usecs [ 2.115543] [drm] DFP table revision: 4 [ 2.115651] [drm] Radeon Display Connectors [ 2.115656] [drm] Connector 0: [ 2.115659] [drm] VGA [ 2.115664] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60 [ 2.115668] [drm] Encoders: [ 2.115672] [drm] CRT1: INTERNAL_DAC1 [ 2.115676] [drm] Connector 1: [ 2.115679] [drm] DVI-I [ 2.115682] [drm] HPD1 [ 2.115687] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64 [ 2.115690] [drm] Encoders: [ 2.115694] [drm] CRT2: INTERNAL_DAC2 [ 2.115698] [drm] DFP1: INTERNAL_TMDS1 [ 2.496953] [drm] fb mappable at 0xF00C0000 [ 2.496957] [drm] vram apper at 0xF0000000 [ 2.496960] [drm] size 8294400 [ 2.496962] [drm] fb depth is 24 [ 2.496964] [drm] pitch is 7680 [ 2.497105] fb1: radeondrmfb frame buffer device [ 2.497115] [drm] Initialized radeon 2.0.0 20080528 for 0000:02:00.0 on minor 1 [ 2.499931] vga16fb: initializing [ 2.499940] vga16fb: mapped to 0xc00a0000 [ 2.499947] vga16fb: not registering due to another framebuffer present [ 2.590815] Console: switching to colour frame buffer device 160x64 [ 2.991459] [drm] 2: conflicting encoders switching off SVIDEO-1 [ 2.991464] [drm] in favor of DVI-I-1 [ 3.001405] [drm] 2: conflicting encoders switching off SVIDEO-1 [ 3.001408] [drm] in favor of DVI-I-1 [ 3.167022] xor: automatically using best checksumming function: pIII_sse [ 3.184011] pIII_sse : 4593.000 MB/sec [ 3.184015] xor: using function: pIII_sse (4593.000 MB/sec) [ 3.187817] device-mapper: dm-raid45: initialized v0.2594b [ 8.313187] EXT3-fs: INFO: recovery required on readonly filesystem. [ 8.313192] EXT3-fs: write access will be enabled during recovery. [ 11.554183] usb 2-1: configuration #1 chosen from 1 choice [ 11.796028] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 11.939604] usb 3-1: configuration #1 chosen from 1 choice [ 11.942529] hub 3-1:1.0: USB hub found [ 11.944454] hub 3-1:1.0: 2 ports detected [ 12.192022] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 12.335636] usb 3-2: configuration #1 chosen from 1 choice [ 12.338578] hub 3-2:1.0: USB hub found [ 12.340505] hub 3-2:1.0: 2 ports detected [ 12.417517] usb 3-1.1: new full speed USB device using uhci_hcd and address 4 [ 12.523526] usb 3-1.1: not running at top speed; connect to a high speed hub [ 12.541661] usb 3-1.1: configuration #1 chosen from 1 choice [ 12.544609] hub 3-1.1:1.0: USB hub found [ 12.546533] hub 3-1.1:1.0: 7 ports detected [ 12.629546] usb 3-1.2: new low speed USB device using uhci_hcd and address 5 [ 12.653550] hub 3-1.1:1.0: hub_port_status failed (err = -32) [ 12.767694] usb 3-1.2: configuration #1 chosen from 1 choice [ 12.845577] usb 3-2.1: new full speed USB device using uhci_hcd and address 6 [ 12.974750] usb 3-2.1: configuration #1 chosen from 1 choice [ 28.733925] kjournald starting. Commit interval 5 seconds [ 28.733951] EXT3-fs: sda1: orphan cleanup on readonly fs [ 28.733960] ext3_orphan_cleanup: deleting unreferenced inode 483710 [ 28.734018] EXT3-fs: sda1: 1 orphan inode deleted [ 28.734021] EXT3-fs: recovery complete. [ 28.808927] EXT3-fs: mounted filesystem with ordered data mode. [ 31.415572] Adding 2417772k swap on /dev/sda3. Priority:-1 extents:1 across:2417772k [ 32.334754] udev: starting version 151 [ 33.432723] udev: renamed network interface eth0 to eth3 [ 33.702958] Initializing USB Mass Storage driver... [ 33.703252] scsi2 : SCSI emulation for USB Mass Storage devices [ 33.703685] usbcore: registered new interface driver usb-storage [ 33.703693] USB Mass Storage support registered. [ 33.704486] usb-storage: device found at 5 [ 33.704492] usb-storage: waiting for device to settle before scanning [ 33.870007] lp: driver loaded but no devices found [ 34.862692] Floppy drive(s): fd0 is 1.44M [ 34.879974] FDC 0 is a post-1991 82077 [ 35.165504] usbcore: registered new interface driver hiddev [ 35.177673] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 35.181050] input: Device USB Device as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1.2/3-1.2:1.0/input/input5 [ 35.181232] generic-usb 0003:05FE:1010.0001: input,hidraw0: USB HID v1.00 Keyboard [Device USB Device] on usb-0000:00:10.1-1.2/input0 [ 35.189142] pata_via 0000:00:0f.1: version 0.3.4 [ 35.189161] pata_via 0000:00:0f.1: can't derive routing for PCI INT A [ 35.189529] scsi3 : pata_via [ 35.189776] scsi4 : pata_via [ 35.192722] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14 [ 35.192728] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15 [ 35.212033] input: Device USB Device as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1.2/3-1.2:1.1/input/input6 [ 35.212291] generic-usb 0003:05FE:1010.0002: input,hidraw1: USB HID v1.00 Mouse [Device USB Device] on usb-0000:00:10.1-1.2/input1 [ 35.212351] usbcore: registered new interface driver usbhid [ 35.212359] usbhid: v2.6:USB HID core driver [ 35.363080] Bluetooth: Core ver 2.15 [ 35.367272] NET: Registered protocol family 31 [ 35.367278] Bluetooth: HCI device and connection manager initialized [ 35.367284] Bluetooth: HCI socket layer initialized [ 35.379090] eth0: register 'cdc_ether' at usb-0000:00:10.1-2.1, CDC Ethernet Device, 00:16:92:a6:13:eb [ 35.379135] usbcore: registered new interface driver cdc_ether [ 35.435028] EXT3 FS on sda1, internal journal [ 35.536507] ata3.00: ATAPI: HL-DT-STDVDRRW GSA-4166B, 1.02, max UDMA/66 [ 35.536557] ata3.01: ATAPI: LITE-ON DVDRW SOHW-1213S, TSD1, max UDMA/66 [ 35.536591] ata3.00: limited to UDMA/33 due to 40-wire cable [ 35.536595] ata3.01: limited to UDMA/33 due to 40-wire cable [ 35.553401] ata3.00: configured for UDMA/33 [ 35.568294] ata3.01: configured for UDMA/33 [ 35.572428] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRRW GSA-4166B 1.02 PQ: 0 ANSI: 5 [ 35.578670] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 35.578677] Uniform CD-ROM driver Revision: 3.20 [ 35.578870] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 35.578986] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 35.580682] scsi 3:0:1:0: CD-ROM LITE-ON DVDRW SOHW-1213S TSD1 PQ: 0 ANSI: 5 [ 35.584681] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 35.585399] sr 3:0:1:0: Attached scsi CD-ROM sr1 [ 35.585822] sr 3:0:1:0: Attached scsi generic sg2 type 5 [ 35.591317] psmouse serio1: ID: 10 00 64 [ 35.619742] type=1505 audit(1271342667.631:2): operation="profile_load" pid=588 name="/sbin/dhclient3" [ 35.620554] type=1505 audit(1271342667.635:3): operation="profile_load" pid=588 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 35.620926] type=1505 audit(1271342667.635:4): operation="profile_load" pid=588 name="/usr/lib/connman/scripts/dhclient-script" [ 35.822512] udev: renamed network interface eth0 to eth1 [ 35.843587] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 35.845262] usbcore: registered new interface driver btusb [ 36.177036] microcode: CPU0 sig=0xf33, pf=0x4, revision=0xc [ 36.177054] platform microcode: firmware: requesting intel-ucode/0f-03-03 [ 36.211843] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input7 [ 36.851545] microcode: CPU1 sig=0xf33, pf=0x4, revision=0xc [ 36.851553] platform microcode: firmware: requesting intel-ucode/0f-03-03 [ 36.859035] Microcode Update Driver: v2.00 , Peter Oruba [ 36.909480] type=1505 audit(1271342668.923:5): operation="profile_load" pid=859 name="/usr/sbin/ntpd" [ 37.613914] Linux video capture interface: v2.00 [ 37.861754] w83627ehf: Found W83627EHF chip at 0x290 [ 37.861965] w83627ehf w83627ehf.656: VID pins in output mode, CPU VID not available [ 37.937731] alloc irq_desc for 17 on node -1 [ 37.937737] alloc kstat_irqs on node -1 [ 37.937753] Bt87x 0000:00:0a.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 37.938110] bt87x0: Using board 1, analog, digital (rate 32000 Hz) [ 38.704190] usb-storage: device scan complete [ 38.705177] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 38.705928] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 38.707329] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 38.708041] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 38.708820] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 38.709131] sd 2:0:0:1: Attached scsi generic sg4 type 0 [ 38.709420] sd 2:0:0:2: Attached scsi generic sg5 type 0 [ 38.709718] sd 2:0:0:3: Attached scsi generic sg6 type 0 [ 38.727026] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 38.729240] sd 2:0:0:1: [sdc] Attached SCSI removable disk [ 38.729942] sd 2:0:0:2: [sdd] Attached SCSI removable disk [ 38.730524] sd 2:0:0:3: [sde] Attached SCSI removable disk [ 38.925080] kjournald starting. Commit interval 5 seconds [ 38.925448] EXT3 FS on sda2, internal journal [ 38.925458] EXT3-fs: mounted filesystem with ordered data mode. [ 38.960902] bttv: driver version 0.9.18 loaded [ 38.960907] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 38.961087] bttv: Bt8xx card found (0). [ 38.961117] bttv 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 38.961135] bttv0: Bt878 (rev 2) at 0000:00:0a.0, irq: 17, latency: 32, mmio: 0xaffff000 [ 38.961178] bttv0: detected: (Askey Magic/others) TView99 CPH06x [card=38], PCI subsystem ID is 144f:3000 [ 38.961184] bttv0: using: Askey CPH06X TView99 [card=38,insmod option] [ 38.961190] IRQ 17/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs [ 38.961232] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] [ 38.961611] bttv0: tuner type=35 [ 39.266424] scsi5 : vhba [ 39.758333] bttv0: audio absent, no audio device found! [ 40.185247] RPC: Registered udp transport module. [ 40.185254] RPC: Registered tcp transport module. [ 40.185258] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 40.615797] All bytes are equal. It is not a TEA5767 [ 40.615914] tuner 5-0060: chip found @ 0xc0 (bt878 #0 [sw]) [ 41.209019] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 41.415099] tuner-simple 5-0060: creating new instance [ 41.415106] tuner-simple 5-0060: type set to 35 (Temic PAL_DK/SECAM_L (4012 FY5)) [ 41.415861] bttv0: registered device video0 [ 41.415909] bttv0: registered device vbi0 [ 41.415929] bttv0: PLL: 28636363 => 35468950 .. ok [ 41.448391] input: bttv IR (card=38) as /devices/pci0000:00/0000:00:0a.0/input/input8 [ 41.448624] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001) [ 41.448636] alloc irq_desc for 22 on node -1 [ 41.448639] alloc kstat_irqs on node -1 [ 41.448649] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 42.201029] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64 [ 42.704258] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled [ 42.704280] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13 [ 42.704642] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 42.704822] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 43.221019] codec_read: codec 0 is not valid [0xfe0000] [ 43.228833] codec_read: codec 0 is not valid [0xfe0000] [ 43.236680] codec_read: codec 0 is not valid [0xfe0000] [ 43.244484] codec_read: codec 0 is not valid [0xfe0000] [ 50.136303] r8169: eth3: link up [ 51.982418] type=1505 audit(1271342683.995:6): operation="profile_replace" pid=1283 name="/sbin/dhclient3" [ 51.983121] type=1505 audit(1271342683.995:7): operation="profile_replace" pid=1283 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 51.983506] type=1505 audit(1271342683.995:8): operation="profile_replace" pid=1283 name="/usr/lib/connman/scripts/dhclient-script" [ 52.180579] type=1505 audit(1271342684.195:9): operation="profile_load" pid=1285 name="/usr/bin/freshclam" [ 52.219765] type=1505 audit(1271342684.231:10): operation="profile_load" pid=1286 name="/usr/lib/cups/backend/cups-pdf" [ 52.220657] type=1505 audit(1271342684.235:11): operation="profile_load" pid=1286 name="/usr/sbin/cupsd" [ 52.422209] type=1505 audit(1271342684.437:12): operation="profile_load" pid=1287 name="/usr/sbin/dhcpd3" [ 52.470027] type=1505 audit(1271342684.483:13): operation="profile_load" pid=1289 name="/usr/sbin/mysqld" [ 52.493672] type=1505 audit(1271342684.507:14): operation="profile_load" pid=1290 name="/usr/sbin/mysqld-akonadi" [ 52.500558] type=1505 audit(1271342684.515:15): operation="profile_load" pid=1291 name="/usr/sbin/named" [ 52.856874] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none [ 52.856881] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 54.272333] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 57.189187] [drm] 2: conflicting encoders switching off SVIDEO-1 [ 57.189193] [drm] in favor of DVI-I-1 [ 57.199145] [drm] 2: conflicting encoders switching off SVIDEO-1 [ 57.199151] [drm] in favor of DVI-I-1 [ 57.273903] [drm] 2: conflicting encoders switching off SVIDEO-1 [ 57.273910] [drm] in favor of DVI-I-1 [ 57.283922] [drm] 2: conflicting encoders switching off SVIDEO-1 [ 57.283925] [drm] in favor of DVI-I-1 [ 58.209197] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 58.209204] apm: disabled - APM is not SMP safe.