[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-20-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #30-Ubuntu SMP Mon Apr 12 15:19:41 UTC 2010 (Ubuntu 2.6.32-20.30-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000005f7df000 (usable) [ 0.000000] BIOS-e820: 000000005f7e0000 - 000000005f7fffc0 (ACPI data) [ 0.000000] BIOS-e820: 000000005f7fffc0 - 000000005f800000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0x5f7df max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 040000000 mask FE0000000 write-back [ 0.000000] 2 base 05F800000 mask FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000005f7df000 (usable) [ 0.000000] modified: 000000005f7e0000 - 000000005f7fffc0 (ACPI data) [ 0.000000] modified: 000000005f7fffc0 - 000000005f800000 (ACPI NVS) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 37877000 - 37fef68f [ 0.000000] Allocated new RAMDISK: 008de000 - 0105668f [ 0.000000] Move RAMDISK from 0000000037877000 - 0000000037fef68e to 008de000 - 0105668e [ 0.000000] ACPI: RSDP 000e5010 00014 (v00 LENOVO) [ 0.000000] ACPI: RSDT 5f7fc804 00030 (v01 LENOVO TP-60 00000015 ABCD 00010200) [ 0.000000] ACPI: FACP 5f7ffb00 00074 (v01 LENOVO FACP_000 00000100 0000 00010200) [ 0.000000] ACPI: DSDT 5f7fca20 030DD (v01 LENOVO TP-60 00000015 INTL 02002036) [ 0.000000] ACPI: FACS 5f7fffc0 00040 [ 0.000000] ACPI: APIC 5f7ffb90 00068 (v01 STUPID MAPIC_00 30307830 ABCD 00010200) [ 0.000000] ACPI: SSDT 5f7fc834 001D8 (v01 PmRef Cpu0Cst 00003001 INTL 20030522) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 639MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008da000 - 00008dd194] BRK ==> [00008da000 - 00008dd194] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008de000 - 000105668f] NEW RAMDISK ==> [00008de000 - 000105668f] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0005f7df [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0005f7df [ 0.000000] On node 0 totalpages: 391034 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1058000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1280 pages used for memmap [ 0.000000] HighMem zone: 162529 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 5f800000 (gap: 5f800000:a0700000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s36024 r0 d21320 u2097152 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 387978 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-20-generic root=UUID=286871c1-0aed-4b22-aea5-fd4f520f0971 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 7822700 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0005f7df) [ 0.000000] Memory: 1526608k/1564540k available (4673k kernel code, 36540k reserved, 2122k data, 656k init, 655236k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc05905f3 - 0xc07a2e48 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc05905f3 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1496.090 MHz processor. [ 0.008008] Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.18 BogoMIPS (lpj=5984360) [ 0.008035] Security Framework initialized [ 0.008073] AppArmor: AppArmor initialized [ 0.008085] Mount-cache hash table entries: 512 [ 0.008298] Initializing cgroup subsys ns [ 0.008305] Initializing cgroup subsys cpuacct [ 0.008312] Initializing cgroup subsys memory [ 0.008323] Initializing cgroup subsys devices [ 0.008327] Initializing cgroup subsys freezer [ 0.008330] Initializing cgroup subsys net_cls [ 0.008365] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008369] CPU: L2 cache: 1024K [ 0.008376] mce: CPU supports 5 MCE banks [ 0.008393] CPU0: Thermal monitoring enabled (TM1) [ 0.008409] Performance Events: p6 PMU driver. [ 0.008420] ... version: 0 [ 0.008423] ... bit width: 32 [ 0.008425] ... generic registers: 2 [ 0.008428] ... value mask: 00000000ffffffff [ 0.008431] ... max period: 000000007fffffff [ 0.008434] ... fixed-purpose events: 0 [ 0.008436] ... event mask: 0000000000000003 [ 0.008443] Checking 'hlt' instruction... OK. [ 0.025146] SMP alternatives: switching to UP code [ 0.034459] ACPI: Core revision 20090903 [ 0.044034] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.044048] ftrace: allocating 21770 entries in 43 pages [ 0.052094] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.052480] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.092721] CPU0: Intel(R) Celeron(R) M processor 1.50GHz stepping 08 [ 0.096001] Brought up 1 CPUs [ 0.096001] Total of 1 processors activated (2992.18 BogoMIPS). [ 0.096001] CPU0 attaching NULL sched-domain. [ 0.096001] devtmpfs: initialized [ 0.096001] regulator: core version 0.5 [ 0.096001] Time: 1:47:17 Date: 04/14/10 [ 0.096001] NET: Registered protocol family 16 [ 0.096001] EISA bus registered [ 0.096001] ACPI: bus type pci registered [ 0.096001] PCI: PCI BIOS revision 2.10 entry at 0xea704, last bus=1 [ 0.096001] PCI: Using configuration type 1 for base access [ 0.096001] bio: create slab at 0 [ 0.096001] ACPI: EC: Look up EC in DSDT [ 0.097518] ACPI: Interpreter enabled [ 0.097529] ACPI: (supports S0 S3 S4 S5) [ 0.097556] ACPI: Using IOAPIC for interrupt routing [ 0.140717] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 [ 0.140898] ACPI: No dock devices found. [ 0.141570] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.141677] pci 0000:00:02.0: reg 10 32bit mmio: [0xd0000000-0xd007ffff] [ 0.141684] pci 0000:00:02.0: reg 14 io port: [0xe000-0xe007] [ 0.141690] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xa0000000-0xafffffff] [ 0.141697] pci 0000:00:02.0: reg 1c 32bit mmio: [0xd0080000-0xd00bffff] [ 0.141737] pci 0000:00:02.1: reg 10 32bit mmio: [0xd0100000-0xd017ffff] [ 0.141859] pci 0000:00:1d.0: reg 20 io port: [0x1200-0x121f] [ 0.141927] pci 0000:00:1d.1: reg 20 io port: [0x1220-0x123f] [ 0.141996] pci 0000:00:1d.2: reg 20 io port: [0x1240-0x125f] [ 0.142064] pci 0000:00:1d.3: reg 20 io port: [0x1260-0x127f] [ 0.142137] pci 0000:00:1d.7: reg 10 32bit mmio: [0x000000-0x0003ff] [ 0.142204] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.142211] pci 0000:00:1d.7: PME# disabled [ 0.142333] pci 0000:00:1e.2: reg 10 io port: [0xe100-0xe1ff] [ 0.142343] pci 0000:00:1e.2: reg 14 io port: [0xe200-0xe23f] [ 0.142352] pci 0000:00:1e.2: reg 18 32bit mmio: [0xd00c0000-0xd00c01ff] [ 0.142362] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xd00c0200-0xd00c02ff] [ 0.142404] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold [ 0.142410] pci 0000:00:1e.2: PME# disabled [ 0.142453] pci 0000:00:1e.3: reg 10 io port: [0xe300-0xe3ff] [ 0.142462] pci 0000:00:1e.3: reg 14 io port: [0xe400-0xe47f] [ 0.142515] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold [ 0.142520] pci 0000:00:1e.3: PME# disabled [ 0.142619] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.142629] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.142635] pci 0000:00:1f.0: quirk: region 1300-133f claimed by ICH6 GPIO [ 0.142640] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0600-067f [ 0.142675] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.142684] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.142693] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.142703] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.142712] pci 0000:00:1f.1: reg 20 io port: [0x1100-0x110f] [ 0.142799] pci 0000:00:1f.3: reg 20 io port: [0x1400-0x141f] [ 0.142886] pci 0000:01:00.0: reg 10 32bit mmio: [0xc0004800-0xc0004fff] [ 0.142897] pci 0000:01:00.0: reg 14 io port: [0xc100-0xc17f] [ 0.142964] pci 0000:01:00.0: supports D2 [ 0.142967] pci 0000:01:00.0: PME# supported from D2 D3hot D3cold [ 0.142974] pci 0000:01:00.0: PME# disabled [ 0.143026] pci 0000:01:01.0: reg 10 io port: [0xc000-0xc0ff] [ 0.143037] pci 0000:01:01.0: reg 14 32bit mmio: [0xc0004000-0xc00040ff] [ 0.143102] pci 0000:01:01.0: supports D1 D2 [ 0.143105] pci 0000:01:01.0: PME# supported from D1 D2 D3hot D3cold [ 0.143112] pci 0000:01:01.0: PME# disabled [ 0.143144] pci 0000:01:02.0: reg 10 32bit mmio: [0xc0002000-0xc0003fff] [ 0.143237] pci 0000:01:04.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.143267] pci 0000:01:04.0: supports D1 D2 [ 0.143270] pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.143276] pci 0000:01:04.0: PME# disabled [ 0.143329] pci 0000:01:04.1: reg 10 32bit mmio: [0xc0000000-0xc000007f] [ 0.143403] pci 0000:01:04.1: supports D1 D2 [ 0.143406] pci 0000:01:04.1: PME# supported from D0 D1 D2 D3hot [ 0.143412] pci 0000:01:04.1: PME# disabled [ 0.143465] pci 0000:01:04.2: reg 10 32bit mmio: [0xc0000100-0xc00001ff] [ 0.143539] pci 0000:01:04.2: supports D1 D2 [ 0.143542] pci 0000:01:04.2: PME# supported from D0 D1 D2 D3hot [ 0.143549] pci 0000:01:04.2: PME# disabled [ 0.143603] pci 0000:01:04.4: reg 10 32bit mmio: [0xc0000200-0xc00002ff] [ 0.143677] pci 0000:01:04.4: supports D1 D2 [ 0.143680] pci 0000:01:04.4: PME# supported from D0 D1 D2 D3hot [ 0.143687] pci 0000:01:04.4: PME# disabled [ 0.143753] pci 0000:00:1e.0: transparent bridge [ 0.143760] pci 0000:00:1e.0: bridge io port: [0xc000-0xdfff] [ 0.143767] pci 0000:00:1e.0: bridge 32bit mmio: [0xc0000000-0xcfffffff] [ 0.143777] pci 0000:00:1e.0: bridge 64bit mmio pref: [0x90000000-0x9fffffff] [ 0.143813] pci_bus 0000:00: on NUMA node 0 [ 0.143819] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.144086] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.150850] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.150972] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 11 12 14 15) [ 0.151090] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.151211] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 *3 4 5 6 7 11 12 14 15) [ 0.151326] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.151441] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.151558] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.151674] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 0.151804] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.151817] vgaarb: loaded [ 0.151987] SCSI subsystem initialized [ 0.152066] libata version 3.00 loaded. [ 0.152158] usbcore: registered new interface driver usbfs [ 0.152179] usbcore: registered new interface driver hub [ 0.152211] usbcore: registered new device driver usb [ 0.152374] ACPI: WMI: Mapper loaded [ 0.152377] PCI: Using ACPI for IRQ routing [ 0.152602] NetLabel: Initializing [ 0.152605] NetLabel: domain hash size = 128 [ 0.152608] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.152630] NetLabel: unlabeled traffic allowed by default [ 0.152826] hpet clockevent registered [ 0.152831] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.152840] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.152847] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.156015] Switching to clocksource tsc [ 0.158686] AppArmor: AppArmor Filesystem Enabled [ 0.158707] pnp: PnP ACPI init [ 0.158735] ACPI: bus type pnp registered [ 0.184365] pnp: PnP ACPI: found 7 devices [ 0.184368] ACPI: ACPI bus type pnp unregistered [ 0.184374] PnPBIOS: Disabled by ACPI PNP [ 0.184392] system 00:03: ioport range 0x800-0x80f has been reserved [ 0.184396] system 00:03: ioport range 0x1000-0x107f has been reserved [ 0.184400] system 00:03: ioport range 0x1300-0x133f has been reserved [ 0.184406] system 00:03: iomem range 0xe0000-0xfffff could not be reserved [ 0.184410] system 00:03: iomem range 0xf0008000-0xf000bfff has been reserved [ 0.184415] system 00:03: iomem range 0xe0000000-0xefffffff has been reserved [ 0.184419] system 00:03: iomem range 0xfff80000-0xffffffff has been reserved [ 0.219207] pci 0000:01:04.0: CardBus bridge, secondary bus 0000:02 [ 0.219211] pci 0000:01:04.0: IO window: 0x00c400-0x00c4ff [ 0.219218] pci 0000:01:04.0: IO window: 0x00c800-0x00c8ff [ 0.219226] pci 0000:01:04.0: PREFETCH window: 0x90000000-0x93ffffff [ 0.219233] pci 0000:01:04.0: MEM window: 0xc4000000-0xc7ffffff [ 0.219240] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.219245] pci 0000:00:1e.0: IO window: 0xc000-0xdfff [ 0.219253] pci 0000:00:1e.0: MEM window: 0xc0000000-0xcfffffff [ 0.219260] pci 0000:00:1e.0: PREFETCH window: 0x00000090000000-0x0000009fffffff [ 0.219279] pci 0000:00:1e.0: setting latency timer to 64 [ 0.219297] alloc irq_desc for 16 on node -1 [ 0.219300] alloc kstat_irqs on node -1 [ 0.219308] pci 0000:01:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.219317] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.219321] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.219325] pci_bus 0000:01: resource 0 io: [0xc000-0xdfff] [ 0.219329] pci_bus 0000:01: resource 1 mem: [0xc0000000-0xcfffffff] [ 0.219332] pci_bus 0000:01: resource 2 pref mem [0x90000000-0x9fffffff] [ 0.219336] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.219340] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.219343] pci_bus 0000:02: resource 0 io: [0xc400-0xc4ff] [ 0.219347] pci_bus 0000:02: resource 1 io: [0xc800-0xc8ff] [ 0.219351] pci_bus 0000:02: resource 2 pref mem [0x90000000-0x93ffffff] [ 0.219354] pci_bus 0000:02: resource 3 mem: [0xc4000000-0xc7ffffff] [ 0.219403] NET: Registered protocol family 2 [ 0.219526] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.219941] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.221219] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.222077] TCP: Hash tables configured (established 131072 bind 65536) [ 0.222081] TCP reno registered [ 0.222273] NET: Registered protocol family 1 [ 0.222316] pci 0000:00:02.0: Boot video device [ 0.222666] cpufreq-nforce2: No nForce2 chipset. [ 0.222709] Scanning for low memory corruption every 60 seconds [ 0.222893] audit: initializing netlink socket (disabled) [ 0.222911] type=2000 audit(1271209637.219:1): initialized [ 0.236820] Trying to unpack rootfs image as initramfs... [ 0.252587] highmem bounce pool size: 64 pages [ 0.252596] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.260444] VFS: Disk quotas dquot_6.5.2 [ 0.260562] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.261440] fuse init (API version 7.13) [ 0.261573] msgmni has been set to 1703 [ 0.261861] alg: No test for stdrng (krng) [ 0.261944] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.261948] io scheduler noop registered [ 0.261951] io scheduler anticipatory registered [ 0.261954] io scheduler deadline registered [ 0.262015] io scheduler cfq registered (default) [ 0.262160] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.262201] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.266583] ACPI: AC Adapter [ACAD] (on-line) [ 0.266687] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.266733] ACPI: Lid Switch [LID0] [ 0.266792] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.266796] ACPI: Power Button [PWRB] [ 0.266865] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.266869] ACPI: Power Button [PWRF] [ 0.267217] Marking TSC unstable due to TSC halts in idle [ 0.267278] processor LNXCPU:00: registered as cooling_device0 [ 0.271406] Switching to clocksource hpet [ 0.290584] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.290995] alloc irq_desc for 20 on node -1 [ 0.290999] alloc kstat_irqs on node -1 [ 0.291008] serial 0000:00:1e.3: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 0.291017] serial 0000:00:1e.3: PCI INT B disabled [ 0.296862] brd: module loaded [ 0.297528] loop: module loaded [ 0.297673] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.297827] ata_piix 0000:00:1f.1: version 2.13 [ 0.297849] alloc irq_desc for 18 on node -1 [ 0.297852] alloc kstat_irqs on node -1 [ 0.297861] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.297920] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.298054] isapnp: Scanning for PnP cards... [ 0.303627] scsi0 : ata_piix [ 0.303745] scsi1 : ata_piix [ 0.304592] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14 [ 0.304596] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15 [ 0.305164] Fixed MDIO Bus: probed [ 0.305212] PPP generic driver version 2.4.2 [ 0.305284] tun: Universal TUN/TAP device driver, 1.6 [ 0.305287] tun: (C) 1999-2004 Max Krasnyansky [ 0.305400] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.305424] ehci_hcd 0000:00:1d.7: enabling device (0000 -> 0002) [ 0.305434] alloc irq_desc for 23 on node -1 [ 0.305437] alloc kstat_irqs on node -1 [ 0.305447] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.305479] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.305483] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.305531] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.305571] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.309460] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.359796] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x60000000 [ 0.376510] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.376715] usb usb1: configuration #1 chosen from 1 choice [ 0.376760] hub 1-0:1.0: USB hub found [ 0.376780] hub 1-0:1.0: 8 ports detected [ 0.376884] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.376910] uhci_hcd: USB Universal Host Controller Interface driver [ 0.376988] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.377002] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.377007] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.377068] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.377104] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001200 [ 0.377231] usb usb2: configuration #1 chosen from 1 choice [ 0.377267] hub 2-0:1.0: USB hub found [ 0.377276] hub 2-0:1.0: 2 ports detected [ 0.377338] alloc irq_desc for 19 on node -1 [ 0.377341] alloc kstat_irqs on node -1 [ 0.377350] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.377358] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.377362] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.377404] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.377445] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001220 [ 0.377560] usb usb3: configuration #1 chosen from 1 choice [ 0.377597] hub 3-0:1.0: USB hub found [ 0.377606] hub 3-0:1.0: 2 ports detected [ 0.377664] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.377672] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.377677] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.377731] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.377768] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001240 [ 0.377889] usb usb4: configuration #1 chosen from 1 choice [ 0.377928] hub 4-0:1.0: USB hub found [ 0.377937] hub 4-0:1.0: 2 ports detected [ 0.377994] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.378002] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.378006] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.378048] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.378085] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001260 [ 0.378200] usb usb5: configuration #1 chosen from 1 choice [ 0.378234] hub 5-0:1.0: USB hub found [ 0.378242] hub 5-0:1.0: 2 ports detected [ 0.378360] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.420519] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.428394] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.428643] mice: PS/2 mouse device common for all mice [ 0.428861] rtc_cmos 00:04: RTC can wake from S4 [ 0.428924] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.428972] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.429154] device-mapper: uevent: version 1.0.3 [ 0.429446] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.429521] device-mapper: multipath: version 1.1.0 loaded [ 0.429525] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.430899] EISA: Probing bus 0 at eisa.0 [ 0.430911] Cannot allocate resource for EISA slot 1 [ 0.430942] EISA: Detected 0 cards. [ 0.490765] cpuidle: using governor ladder [ 0.490847] cpuidle: using governor menu [ 0.491449] TCP cubic registered [ 0.491675] NET: Registered protocol family 10 [ 0.492527] lo: Disabled Privacy Extensions [ 0.492924] NET: Registered protocol family 17 [ 0.492995] Using IPI No-Shortcut mode [ 0.493140] PM: Resume from disk failed. [ 0.493169] registered taskstats version 1 [ 0.493561] Magic number: 6:377:761 [ 0.493679] rtc_cmos 00:04: setting system clock to 2010-04-14 01:47:18 UTC (1271209638) [ 0.493684] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.493686] EDD information not available. [ 0.497108] ata1.00: ATA-6: HTS541080G9AT00, MB4IA60A, max UDMA/100 [ 0.497113] ata1.00: 156301488 sectors, multi 16: LBA [ 0.497167] ata1.01: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, 1.00, max UDMA/33 [ 0.497427] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.504762] ata1.00: configured for UDMA/100 [ 0.520396] ata1.01: configured for UDMA/33 [ 0.763818] ACPI: Battery Slot [BAT1] (battery present) [ 0.871389] Freeing initrd memory: 7649k freed [ 0.967101] isapnp: No Plug & Play device found [ 0.967371] scsi 0:0:0:0: Direct-Access ATA HTS541080G9AT00 MB4I PQ: 0 ANSI: 5 [ 0.967639] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.972116] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 0.972187] sd 0:0:0:0: [sda] Write Protect is off [ 0.972191] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.972246] scsi 0:0:1:0: CD-ROM HL-DT-ST RW/DVD GCC-4244N 1.00 PQ: 0 ANSI: 5 [ 0.972418] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.981116] sda: sda1 sda2 [ 1.079508] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.079528] Freeing unused kernel memory: 656k freed [ 1.080113] Write protecting the kernel text: 4676k [ 1.080162] Write protecting the kernel read-only data: 1840k [ 1.103157] udev: starting version 151 [ 1.124098] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.269572] usb 1-1: configuration #1 chosen from 1 choice [ 1.400471] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 1.408786] alloc irq_desc for 22 on node -1 [ 1.408791] alloc kstat_irqs on node -1 [ 1.408801] b43-pci-bridge 0000:01:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.413808] Initializing USB Mass Storage driver... [ 1.418704] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.418780] scsi2 : SCSI emulation for USB Mass Storage devices [ 1.418988] usbcore: registered new interface driver usb-storage [ 1.418992] USB Mass Storage support registered. [ 1.419451] usb-storage: device found at 2 [ 1.419454] usb-storage: waiting for device to settle before scanning [ 1.468080] ssb: Sonics Silicon Backplane found on PCI device 0000:01:02.0 [ 1.468176] ohci1394 0000:01:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.526214] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[c0004800-c0004fff] Max Packet=[1024] IR/IT contexts=[4/8] [ 1.532583] 8139cp 0000:01:01.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.538208] 8139too Fast Ethernet driver 0.9.28 [ 1.538267] alloc irq_desc for 21 on node -1 [ 1.538271] alloc kstat_irqs on node -1 [ 1.538280] 8139too 0000:01:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.539765] eth0: RealTek RTL8139 at 0xc000, 00:0f:b0:c9:62:7c, IRQ 21 [ 1.545639] usb 1-4: configuration #1 chosen from 1 choice [ 1.546024] hub 1-4:1.0: USB hub found [ 1.546270] hub 1-4:1.0: 4 ports detected [ 1.778689] EXT4-fs (sda7): INFO: recovery required on readonly filesystem [ 1.778697] EXT4-fs (sda7): write access will be enabled during recovery [ 1.900029] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 2.070018] usb 4-1: configuration #1 chosen from 1 choice [ 2.072943] hub 4-1:1.0: USB hub found [ 2.074880] hub 4-1:1.0: 4 ports detected [ 2.280305] usb 1-4.3: new low speed USB device using ehci_hcd and address 5 [ 2.380796] usb 1-4.3: configuration #1 chosen from 1 choice [ 2.401214] usbcore: registered new interface driver hiddev [ 2.410074] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.3/1-4.3:1.0/input/input5 [ 2.410343] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.7-4.3/input0 [ 2.410377] usbcore: registered new interface driver usbhid [ 2.410501] usbhid: v2.6:USB HID core driver [ 2.456321] usb 1-4.4: new full speed USB device using ehci_hcd and address 6 [ 2.564712] usb 1-4.4: configuration #1 chosen from 1 choice [ 2.569555] input: HOLTEK AudioHub Speaker as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4:1.2/input/input6 [ 2.569692] generic-usb 0003:046D:0A0E.0002: input,hidraw1: USB HID v1.10 Device [HOLTEK AudioHub Speaker] on usb-0000:00:1d.7-4.4/input2 [ 2.768325] usb 1-4.2: new full speed USB device using ehci_hcd and address 7 [ 2.804177] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f648e4020b6] [ 2.864097] usb 1-4.2: configuration #1 chosen from 1 choice [ 5.294071] EXT4-fs (sda7): orphan cleanup on readonly fs [ 5.294086] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 149291 [ 5.294212] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 137283 [ 5.327123] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 142019 [ 5.327202] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 139175 [ 5.375352] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 923250 [ 5.445769] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 791623 [ 5.446049] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 791596 [ 5.446070] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 791569 [ 5.446310] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 791567 [ 5.446330] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 791565 [ 5.446348] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 791563 [ 5.446611] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 791560 [ 5.446883] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 791557 [ 5.484932] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 791544 [ 5.484960] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 791537 [ 5.484979] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 791534 [ 5.484997] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 791529 [ 5.511783] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 786748 [ 5.560284] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 790241 [ 5.585623] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 786108 [ 5.586555] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 923506 [ 5.676828] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 801223 [ 5.676855] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 801214 [ 5.676877] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 801213 [ 5.676896] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 801144 [ 5.676915] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 801137 [ 5.718641] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 789268 [ 5.754614] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 788837 [ 5.813460] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 785025 [ 5.871390] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 145387 [ 5.883338] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 145377 [ 5.903672] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 787231 [ 5.903711] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 141420 [ 5.906440] EXT4-fs (sda7): ext4_orphan_cleanup: deleting unreferenced inode 141250 [ 5.906465] EXT4-fs (sda7): 34 orphan inodes deleted [ 5.906470] EXT4-fs (sda7): recovery complete [ 5.960738] EXT4-fs (sda7): mounted filesystem with ordered data mode [ 6.417687] usb-storage: device scan complete [ 6.419223] scsi 2:0:0:0: Direct-Access Seagate FreeAgent Go 100F PQ: 0 ANSI: 4 [ 6.419816] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 6.421944] sd 2:0:0:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 6.423436] sd 2:0:0:0: [sdb] Write Protect is off [ 6.423440] sd 2:0:0:0: [sdb] Mode Sense: 1c 00 00 00 [ 6.423444] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.426938] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.426946] sdb: sdb1 [ 6.486313] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.486318] sd 2:0:0:0: [sdb] Attached SCSI disk [ 8.636277] Adding 995988k swap on /dev/sda8. Priority:-1 extents:1 across:995988k [ 10.035428] udev: starting version 151 [ 11.333347] type=1505 audit(1271209649.338:2): operation="profile_load" pid=475 name="/sbin/dhclient3" [ 11.334145] type=1505 audit(1271209649.338:3): operation="profile_load" pid=475 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 11.334577] type=1505 audit(1271209649.338:4): operation="profile_load" pid=475 name="/usr/lib/connman/scripts/dhclient-script" [ 12.229089] type=1505 audit(1271209650.235:5): operation="profile_load" pid=516 name="/usr/sbin/ntpd" [ 12.694932] lp: driver loaded but no devices found [ 12.916959] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7 [ 12.917187] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no) [ 13.097968] Bluetooth: Core ver 2.15 [ 13.098122] NET: Registered protocol family 31 [ 13.098125] Bluetooth: HCI device and connection manager initialized [ 13.098129] Bluetooth: HCI socket layer initialized [ 13.131351] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 13.133718] usbcore: registered new interface driver btusb [ 13.941301] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x200000 [ 14.015287] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 14.167335] cfg80211: Calling CRDA to update world regulatory domain [ 14.394877] sdhci: Secure Digital Host Controller Interface driver [ 14.394882] sdhci: Copyright(c) Pierre Ossman [ 14.429057] Linux agpgart interface v0.103 [ 14.433291] intel_rng: FWH not detected [ 14.494540] sdhci-pci 0000:01:04.2: SDHCI controller found [1524:0550] (rev 1) [ 14.494570] alloc irq_desc for 17 on node -1 [ 14.494573] alloc kstat_irqs on node -1 [ 14.494583] sdhci-pci 0000:01:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 14.494800] Registered led device: mmc0:: [ 14.494919] mmc0: SDHCI controller on PCI [0000:01:04.2] using PIO [ 14.494946] sdhci-pci 0000:01:04.4: SDHCI controller found [1524:0551] (rev 1) [ 14.494966] sdhci-pci 0000:01:04.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 14.495091] Registered led device: mmc1:: [ 14.495198] mmc1: SDHCI controller on PCI [0000:01:04.4] using PIO [ 15.078696] agpgart-intel 0000:00:00.0: Intel 915GM Chipset [ 15.078979] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 15.083835] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xa0000000 [ 15.174743] yenta_cardbus 0000:01:04.0: CardBus bridge found [17aa:2075] [ 15.174775] yenta_cardbus 0000:01:04.0: Using CSCINT to route CSC interrupts to PCI [ 15.174778] yenta_cardbus 0000:01:04.0: Routing CardBus interrupts to PCI [ 15.174786] yenta_cardbus 0000:01:04.0: TI: mfunc 0x10511212, devctl 0x44 [ 15.241562] cfg80211: World regulatory domain updated: [ 15.241568] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.241572] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.241576] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.241580] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.241584] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.241587] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.351632] [drm] Initialized drm 1.1.0 20060810 [ 15.404833] yenta_cardbus 0000:01:04.0: ISA IRQ mask 0x0cf8, PCI irq 16 [ 15.404840] yenta_cardbus 0000:01:04.0: Socket status: 30000020 [ 15.404851] yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xdfff [ 15.404856] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xdfff: clean. [ 15.405359] yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge Memory window: 0xc0000000 - 0xcfffffff [ 15.405363] yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge Memory window: 0x90000000 - 0x9fffffff [ 15.670904] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.670912] i915 0000:00:02.0: setting latency timer to 64 [ 15.675781] [drm] set up 7M of stolen space [ 15.780124] [drm] initialized overlay support [ 16.053983] b43-phy0: Broadcom 4318 WLAN found (core revision 9) [ 16.144043] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 [ 16.144102] pci 0000:02:00.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 16.144185] pci 0000:02:00.0: supports D1 D2 [ 16.144188] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot [ 16.144196] pci 0000:02:00.0: PME# disabled [ 16.144253] pci 0000:02:00.1: reg 10 32bit mmio: [0x000000-0x000fff] [ 16.144332] pci 0000:02:00.1: supports D1 D2 [ 16.144335] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot [ 16.144342] pci 0000:02:00.1: PME# disabled [ 16.144398] pci 0000:02:00.2: reg 10 32bit mmio: [0x000000-0x0000ff] [ 16.144477] pci 0000:02:00.2: supports D1 D2 [ 16.144480] pci 0000:02:00.2: PME# supported from D0 D1 D2 D3hot [ 16.144487] pci 0000:02:00.2: PME# disabled [ 16.145197] ohci_hcd 0000:02:00.0: enabling device (0000 -> 0002) [ 16.145211] ohci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.145242] ohci_hcd 0000:02:00.0: setting latency timer to 64 [ 16.145247] ohci_hcd 0000:02:00.0: OHCI Host Controller [ 16.145473] ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 6 [ 16.145503] ohci_hcd 0000:02:00.0: irq 16, io mem 0xc4000000 [ 16.796544] usb usb6: configuration #1 chosen from 1 choice [ 16.796685] hub 6-0:1.0: USB hub found [ 16.796702] hub 6-0:1.0: 3 ports detected [ 16.797348] ohci_hcd 0000:02:00.1: enabling device (0000 -> 0002) [ 16.797363] ohci_hcd 0000:02:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 16.797395] ohci_hcd 0000:02:00.1: setting latency timer to 64 [ 16.797400] ohci_hcd 0000:02:00.1: OHCI Host Controller [ 16.797606] ohci_hcd 0000:02:00.1: new USB bus registered, assigned bus number 7 [ 16.797634] ohci_hcd 0000:02:00.1: irq 16, io mem 0xc4001000 [ 17.385766] usb usb7: configuration #1 chosen from 1 choice [ 17.385944] hub 7-0:1.0: USB hub found [ 17.385962] hub 7-0:1.0: 2 ports detected [ 17.386592] ehci_hcd 0000:02:00.2: enabling device (0000 -> 0002) [ 17.386606] ehci_hcd 0000:02:00.2: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [ 17.386649] ehci_hcd 0000:02:00.2: EHCI Host Controller [ 17.386855] ehci_hcd 0000:02:00.2: new USB bus registered, assigned bus number 8 [ 17.408067] ehci_hcd 0000:02:00.2: irq 16, io mem 0xc4002000 [ 17.420037] ehci_hcd 0000:02:00.2: USB 2.0 started, EHCI 0.95 [ 17.420232] usb usb8: configuration #1 chosen from 1 choice [ 17.420284] hub 8-0:1.0: USB hub found [ 17.420297] hub 8-0:1.0: 5 ports detected [ 17.438912] fb0: inteldrmfb frame buffer device [ 17.438916] registered panic notifier [ 17.438928] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 17.565258] Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 17.565305] Intel ICH 0000:00:1e.2: setting latency timer to 64 [ 17.732044] usb 8-3: new high speed USB device using ehci_hcd and address 2 [ 17.739499] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 17.741426] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 17.742205] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 17.742847] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 17.743688] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 17.763120] vga16fb: initializing [ 17.763127] vga16fb: mapped to 0xc00a0000 [ 17.763133] vga16fb: not registering due to another framebuffer present [ 17.885306] usb 8-3: configuration #1 chosen from 1 choice [ 17.892271] scsi3 : SCSI emulation for USB Mass Storage devices [ 17.894330] usb-storage: device found at 2 [ 17.894334] usb-storage: waiting for device to settle before scanning [ 18.253167] phy0: Selected rate control algorithm 'minstrel' [ 18.254069] Registered led device: b43-phy0::tx [ 18.254094] Registered led device: b43-phy0::rx [ 18.254122] Registered led device: b43-phy0::radio [ 18.254225] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 18.392042] intel8x0_measure_ac97_clock: measured 55393 usecs (2669 samples) [ 18.392048] intel8x0: clocking to 48000 [ 18.659656] usbcore: registered new interface driver snd-usb-audio [ 19.144972] Console: switching to colour frame buffer device 128x48 [ 20.987701] ip_tables: (C) 2000-2006 Netfilter Core Team [ 21.216880] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 21.217960] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 21.217965] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 21.217968] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 22.892422] usb-storage: device scan complete [ 22.895775] scsi 3:0:0:0: Direct-Access WDC WD50 00AAVS-00ZTB0 PQ: 0 ANSI: 2 [ 22.898589] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 22.899619] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 22.905758] sd 3:0:0:0: [sdc] Write Protect is off [ 22.905765] sd 3:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 22.905769] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 22.909248] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 22.909319] sdc: [ 23.771959] eth0: link down [ 23.772611] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.816093] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 23.979504] b43 ssb0:0: firmware: requesting b43/pcm5.fw [ 24.167183] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw [ 24.280127] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw [ 24.516055] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 24.558910] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.639994] type=1505 audit(1271209663.642:6): operation="profile_load" pid=943 name="/usr/share/gdm/guest-session/Xsession" [ 25.643389] type=1505 audit(1271209663.646:7): operation="profile_replace" pid=945 name="/sbin/dhclient3" [ 25.644429] type=1505 audit(1271209663.650:8): operation="profile_replace" pid=945 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 25.644873] type=1505 audit(1271209663.650:9): operation="profile_replace" pid=945 name="/usr/lib/connman/scripts/dhclient-script" [ 26.000482] type=1505 audit(1271209664.006:10): operation="profile_load" pid=946 name="/usr/bin/evince" [ 26.369665] type=1505 audit(1271209664.374:11): operation="profile_load" pid=946 name="/usr/bin/evince-previewer" [ 26.376332] type=1505 audit(1271209664.382:12): operation="profile_load" pid=946 name="/usr/bin/evince-thumbnailer" [ 26.398403] type=1505 audit(1271209664.402:13): operation="profile_load" pid=949 name="/usr/bin/freshclam" [ 26.522671] type=1505 audit(1271209664.526:14): operation="profile_load" pid=950 name="/usr/sbin/clamd" [ 26.655512] type=1505 audit(1271209664.660:15): operation="profile_load" pid=951 name="/usr/lib/cups/backend/cups-pdf" [ 28.383654] sdc1 [ 28.389619] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 28.389627] sd 3:0:0:0: [sdc] Attached SCSI disk [ 28.672809] Bluetooth: L2CAP ver 2.14 [ 28.672814] Bluetooth: L2CAP socket layer initialized