[ 0.000000] BIOS EBDA/lowmem at: 0009dc00/0009dc00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-16-generic (buildd@rothera) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #57-Ubuntu SMP Wed Nov 11 09:47:24 UTC 2009 (Ubuntu 2.6.28-16.57-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000afec0000 (usable) [ 0.000000] BIOS-e820: 00000000afec0000 - 00000000afecf000 (ACPI data) [ 0.000000] BIOS-e820: 00000000afecf000 - 00000000afee5000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000afee5000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0xafec0 max_arch_pfn = 0x100000 [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000090c00 (usable) [ 0.000000] modified: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000afec0000 (usable) [ 0.000000] modified: 00000000afec0000 - 00000000afecf000 (ACPI data) [ 0.000000] modified: 00000000afecf000 - 00000000afee5000 (ACPI NVS) [ 0.000000] modified: 00000000afee5000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 378c1000 - 37fef009 [ 0.000000] Allocated new RAMDISK: 0087d000 - 00fab009 [ 0.000000] Move RAMDISK from 00000000378c1000 - 0000000037fef008 to 0087d000 - 00fab008 [ 0.000000] ACPI: RSDP 000F7B20, 0024 (r2 PTLTD ) [ 0.000000] ACPI: XSDT AFEC38A9, 00A4 (r1 DELL QA09 6040000 LTP 0) [ 0.000000] ACPI: FACP AFECEC04, 00F4 (r3 NVIDIA MCP79 6040000 PTL_ F4240) [ 0.000000] ACPI: DSDT AFEC543B, 9755 (r1 NVIDIA MCP79 6040000 MSFT 3000001) [ 0.000000] ACPI: FACS AFEE4FC0, 0040 [ 0.000000] ACPI: MCFG AFECECF8, 003C (r1 PTLTD MCFG 6040000 LTP 0) [ 0.000000] ACPI: HPET AFECED34, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1) [ 0.000000] ACPI: APIC AFECED6C, 0072 (r1 PTLTD APIC 6040000 LTP 0) [ 0.000000] ACPI: BOOT AFECEDDE, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) [ 0.000000] ACPI: SLIC AFECEE06, 0176 (r1 DELL QA09 6040000 LTP 0) [ 0.000000] ACPI: OSFR AFECEF7C, 0084 (r1 DELL DELL 6040000 ASL 61) [ 0.000000] ACPI: SSDT AFEC51DC, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228) [ 0.000000] ACPI: SSDT AFEC5136, 00A6 (r1 PmRef Cpu7Tst 3000 INTL 20050228) [ 0.000000] ACPI: SSDT AFEC5090, 00A6 (r1 PmRef Cpu6Tst 3000 INTL 20050228) [ 0.000000] ACPI: SSDT AFEC4FEA, 00A6 (r1 PmRef Cpu5Tst 3000 INTL 20050228) [ 0.000000] ACPI: SSDT AFEC4F44, 00A6 (r1 PmRef Cpu4Tst 3000 INTL 20050228) [ 0.000000] ACPI: SSDT AFEC4E9E, 00A6 (r1 PmRef Cpu3Tst 3000 INTL 20050228) [ 0.000000] ACPI: SSDT AFEC4DF8, 00A6 (r1 PmRef Cpu2Tst 3000 INTL 20050228) [ 0.000000] ACPI: SSDT AFEC4D52, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050228) [ 0.000000] ACPI: SSDT AFEC394D, 1405 (r1 PmRef CpuPm 3000 INTL 20050228) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1930MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008780ac] TEXT DATA BSS ==> [0000100000 - 00008780ac] [ 0.000000] #4 [0000879000 - 000087d000] INIT_PG_TABLE ==> [0000879000 - 000087d000] [ 0.000000] #5 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [000087d000 - 0000fab009] NEW RAMDISK ==> [000087d000 - 0000fab009] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00f7b50] 000f7b50 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x000afec0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000007 [ 0.000000] 0: 0x00000010 -> 0x00000090 [ 0.000000] 0: 0x00000100 -> 0x000afec0 [ 0.000000] On node 0 totalpages: 720451 [ 0.000000] free_area_init_node: node 0, pgdat c06cb780, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3939 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 3862 pages used for memmap [ 0.000000] HighMem zone: 490412 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x10dea301 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000090000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 714821 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.28-16-generic root=UUID=bc924d04-c1ac-462a-9c92-ca15071ade92 ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1999.796 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 14411520 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 2828328k/2882304k available (4116k kernel code, 52584k reserved, 2199k data, 532k init, 1977096k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0733000 - 0xc07b8000 ( 532 kB) [ 0.004000] .data : 0xc05051fd - 0xc072ae60 (2199 kB) [ 0.004000] .text : 0xc0100000 - 0xc05051fd (4116 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.59 BogoMIPS (lpj=7999184) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] AppArmor: AppArmor initialized [ 0.004000] Mount-cache hash table entries: 512 [ 0.004000] Initializing cgroup subsys ns [ 0.004000] Initializing cgroup subsys cpuacct [ 0.004000] Initializing cgroup subsys memory [ 0.004000] Initializing cgroup subsys freezer [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] using mwait in idle threads. [ 0.004000] Checking 'hlt' instruction... OK. [ 0.018482] ACPI: Core revision 20080926 [ 0.021215] ACPI: Checking initramfs for custom DSDT [ 0.324468] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.366642] CPU0: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 0a [ 0.368001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3999.94 BogoMIPS (lpj=7999887) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.452672] CPU1: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 0a [ 0.452690] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.456029] Brought up 2 CPUs [ 0.456032] Total of 2 processors activated (7999.53 BogoMIPS). [ 0.456097] CPU0 attaching sched-domain: [ 0.456099] domain 0: span 0-1 level MC [ 0.456102] groups: 0 1 [ 0.456107] CPU1 attaching sched-domain: [ 0.456109] domain 0: span 0-1 level MC [ 0.456111] groups: 1 0 [ 0.456172] net_namespace: 776 bytes [ 0.456172] Booting paravirtualized kernel on bare hardware [ 0.456294] Time: 11:59:52 Date: 04/09/10 [ 0.456294] regulator: core version 0.5 [ 0.456294] NET: Registered protocol family 16 [ 0.456294] EISA bus registered [ 0.456294] ACPI: bus type pci registered [ 0.456294] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 7 [ 0.456294] PCI: MCFG area at e0000000 reserved in E820 [ 0.456294] PCI: Using MMCONFIG for extended config space [ 0.456294] PCI: Using configuration type 1 for base access [ 0.457272] ACPI: EC: Look up EC in DSDT [ 0.465156] ACPI: Interpreter enabled [ 0.465160] ACPI: (supports S0 S3 S4 S5) [ 0.465176] ACPI: Using IOAPIC for interrupt routing [ 0.469453] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.481120] ACPI: EC: GPE = 0x47, I/O: command/status = 0x66, data = 0x62 [ 0.481122] ACPI: EC: driver started in interrupt mode [ 0.481337] ACPI: No dock devices found. [ 0.481349] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.481575] pci 0000:00:03.0: reg 10 io port: [0x1c00-0x1cff] [ 0.481673] pci 0000:00:03.2: reg 10 io port: [0x3080-0x30bf] [ 0.481688] pci 0000:00:03.2: reg 20 io port: [0x3040-0x307f] [ 0.481693] pci 0000:00:03.2: reg 24 io port: [0x2000-0x203f] [ 0.481705] pci 0000:00:03.2: PME# supported from D3hot D3cold [ 0.481711] pci 0000:00:03.2: PME# disabled [ 0.481835] pci 0000:00:03.5: reg 10 32bit mmio: [0xf0600000-0xf067ffff] [ 0.481922] pci 0000:00:04.0: reg 10 32bit mmio: [0xf0886000-0xf0886fff] [ 0.481948] pci 0000:00:04.0: supports D1 D2 [ 0.481950] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.481953] pci 0000:00:04.0: PME# disabled [ 0.481981] pci 0000:00:04.1: reg 10 32bit mmio: [0xf0889000-0xf08890ff] [ 0.482009] pci 0000:00:04.1: supports D1 D2 [ 0.482011] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.482014] pci 0000:00:04.1: PME# disabled [ 0.482047] pci 0000:00:06.0: reg 10 32bit mmio: [0xf0887000-0xf0887fff] [ 0.482072] pci 0000:00:06.0: supports D1 D2 [ 0.482074] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.482077] pci 0000:00:06.0: PME# disabled [ 0.482107] pci 0000:00:06.1: reg 10 32bit mmio: [0xf0889400-0xf08894ff] [ 0.482134] pci 0000:00:06.1: supports D1 D2 [ 0.482136] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.482140] pci 0000:00:06.1: PME# disabled [ 0.482172] pci 0000:00:08.0: reg 10 32bit mmio: [0xf0880000-0xf0883fff] [ 0.482198] pci 0000:00:08.0: PME# supported from D3hot D3cold [ 0.482201] pci 0000:00:08.0: PME# disabled [ 0.482252] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf0888000-0xf0888fff] [ 0.482256] pci 0000:00:0a.0: reg 14 io port: [0x30d0-0x30d7] [ 0.482261] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf0889c00-0xf0889cff] [ 0.482266] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf0889800-0xf088980f] [ 0.482281] pci 0000:00:0a.0: supports D1 D2 [ 0.482283] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.482287] pci 0000:00:0a.0: PME# disabled [ 0.482315] pci 0000:00:0b.0: reg 10 io port: [0x30e8-0x30ef] [ 0.482319] pci 0000:00:0b.0: reg 14 io port: [0x30dc-0x30df] [ 0.482324] pci 0000:00:0b.0: reg 18 io port: [0x30e0-0x30e7] [ 0.482328] pci 0000:00:0b.0: reg 1c io port: [0x30d8-0x30db] [ 0.482333] pci 0000:00:0b.0: reg 20 io port: [0x30c0-0x30cf] [ 0.482337] pci 0000:00:0b.0: reg 24 32bit mmio: [0xf0884000-0xf0885fff] [ 0.482483] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.482491] pci 0000:00:0c.0: PME# disabled [ 0.482555] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.482558] pci 0000:00:10.0: PME# disabled [ 0.482699] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.482707] pci 0000:00:15.0: PME# disabled [ 0.482871] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.482878] pci 0000:00:16.0: PME# disabled [ 0.483042] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.483049] pci 0000:00:17.0: PME# disabled [ 0.483213] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.483220] pci 0000:00:18.0: PME# disabled [ 0.483295] pci 0000:01:07.0: reg 10 32bit mmio: [0xf0500000-0xf05007ff] [ 0.483329] pci 0000:01:07.0: supports D1 D2 [ 0.483330] pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.483334] pci 0000:01:07.0: PME# disabled [ 0.483363] pci 0000:01:07.1: reg 10 32bit mmio: [0xf0500800-0xf05008ff] [ 0.483396] pci 0000:01:07.1: supports D1 D2 [ 0.483398] pci 0000:01:07.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.483402] pci 0000:01:07.1: PME# disabled [ 0.483431] pci 0000:01:07.2: reg 10 32bit mmio: [0xf0500c00-0xf0500cff] [ 0.483464] pci 0000:01:07.2: supports D1 D2 [ 0.483466] pci 0000:01:07.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.483470] pci 0000:01:07.2: PME# disabled [ 0.483498] pci 0000:01:07.3: reg 10 32bit mmio: [0xf0501000-0xf05010ff] [ 0.483532] pci 0000:01:07.3: supports D1 D2 [ 0.483533] pci 0000:01:07.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.483537] pci 0000:01:07.3: PME# disabled [ 0.483567] pci 0000:01:07.4: reg 10 32bit mmio: [0xf0501400-0xf05014ff] [ 0.483600] pci 0000:01:07.4: supports D1 D2 [ 0.483602] pci 0000:01:07.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.483606] pci 0000:01:07.4: PME# disabled [ 0.483643] pci 0000:00:09.0: transparent bridge [ 0.483648] pci 0000:00:09.0: bridge 32bit mmio: [0xf0500000-0xf05fffff] [ 0.483760] pci 0000:03:00.0: reg 10 32bit mmio: [0xcc000000-0xccffffff] [ 0.483770] pci 0000:03:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.483779] pci 0000:03:00.0: reg 1c 64bit mmio: [0xce000000-0xcfffffff] [ 0.483785] pci 0000:03:00.0: reg 24 io port: [0x4000-0x407f] [ 0.483790] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.483833] pci 0000:00:10.0: bridge io port: [0x4000-0x4fff] [ 0.483836] pci 0000:00:10.0: bridge 32bit mmio: [0xcc000000-0xccffffff] [ 0.483841] pci 0000:00:10.0: bridge 64bit mmio pref: [0xce000000-0xdfffffff] [ 0.483902] pci 0000:00:15.0: bridge io port: [0x5000-0x5fff] [ 0.483910] pci 0000:00:15.0: bridge 32bit mmio: [0xf0200000-0xf03fffff] [ 0.483924] pci 0000:00:15.0: bridge 64bit mmio pref: [0xf0000000-0xf01fffff] [ 0.484085] pci 0000:06:00.0: reg 10 64bit mmio: [0xf0400000-0xf0403fff] [ 0.484162] pci 0000:06:00.0: supports D1 D2 [ 0.484164] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.484173] pci 0000:06:00.0: PME# disabled [ 0.484261] pci 0000:00:16.0: bridge 32bit mmio: [0xf0400000-0xf04fffff] [ 0.484501] bus 00 -> node 0 [ 0.484507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.484782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] [ 0.484801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.553090] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11 14 15) [ 0.553355] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15) [ 0.553618] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.553881] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled. [ 0.554145] ACPI: PCI Interrupt Link [Z00Q] (IRQs 18 19 20 21 22 23) *11 [ 0.554408] ACPI: PCI Interrupt Link [Z00R] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.554672] ACPI: PCI Interrupt Link [Z00S] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.554935] ACPI: PCI Interrupt Link [Z00T] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.555199] ACPI: PCI Interrupt Link [Z00U] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.555462] ACPI: PCI Interrupt Link [Z00V] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.555725] ACPI: PCI Interrupt Link [Z00W] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.555988] ACPI: PCI Interrupt Link [Z00X] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.556255] ACPI: PCI Interrupt Link [Z00Y] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.556522] ACPI: PCI Interrupt Link [Z00Z] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.556786] ACPI: PCI Interrupt Link [Z010] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.557049] ACPI: PCI Interrupt Link [Z011] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.557312] ACPI: PCI Interrupt Link [Z012] (IRQs 18 19 20 21 22 23) *10 [ 0.557575] ACPI: PCI Interrupt Link [Z013] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.557838] ACPI: PCI Interrupt Link [Z014] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.558101] ACPI: PCI Interrupt Link [Z015] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.558365] ACPI: PCI Interrupt Link [Z016] (IRQs 18 19 20 21 22 23) *11 [ 0.558628] ACPI: PCI Interrupt Link [Z017] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.558891] ACPI: PCI Interrupt Link [Z018] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.559154] ACPI: PCI Interrupt Link [Z019] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.559417] ACPI: PCI Interrupt Link [Z01A] (IRQs 18 19 20 21 22 23) *10 [ 0.559680] ACPI: PCI Interrupt Link [Z01B] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.559943] ACPI: PCI Interrupt Link [Z01C] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.560212] ACPI: PCI Interrupt Link [Z01D] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.560476] ACPI: PCI Interrupt Link [Z01E] (IRQs 18 19 20 21 22 23) *11 [ 0.560738] ACPI: PCI Interrupt Link [Z01F] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.561002] ACPI: PCI Interrupt Link [Z01G] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.561266] ACPI: PCI Interrupt Link [Z01H] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.561529] ACPI: PCI Interrupt Link [LSMB] (IRQs 18 19 20 21 22 23) *10 [ 0.561791] ACPI: PCI Interrupt Link [LUS0] (IRQs 18 19 20 21 22 23) *7 [ 0.562055] ACPI: PCI Interrupt Link [LUS2] (IRQs 18 19 20 21 22 23) *11 [ 0.562318] ACPI: PCI Interrupt Link [LMAC] (IRQs 18 19 20 21 22 23) *10 [ 0.562580] ACPI: PCI Interrupt Link [LAZA] (IRQs 17) *11 [ 0.562840] ACPI: PCI Interrupt Link [LGPU] (IRQs 18 19 20 21 22 23) *5 [ 0.563103] ACPI: PCI Interrupt Link [LPID] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.563367] ACPI: PCI Interrupt Link [LSI0] (IRQs 18 19 20 21 22 23) *11 [ 0.563631] ACPI: PCI Interrupt Link [LSI1] (IRQs 18 19 20 21 22 23) *0, disabled. [ 0.563894] ACPI: PCI Interrupt Link [Z00O] (IRQs 18 19 20 21 22 23) *5 [ 0.564163] ACPI: PCI Interrupt Link [Z00P] (IRQs 18 19 20 21 22 23) *10 [ 0.564426] ACPI: PCI Interrupt Link [LPMU] (IRQs 18 19 20 21 22 23) *10 [ 0.564731] ACPI: WMI: Mapper loaded [ 0.564764] SCSI subsystem initialized [ 0.564764] libata version 3.00 loaded. [ 0.564764] usbcore: registered new interface driver usbfs [ 0.564764] usbcore: registered new interface driver hub [ 0.564764] usbcore: registered new device driver usb [ 0.564764] PCI: Using ACPI for IRQ routing [ 0.572008] Bluetooth: Core ver 2.13 [ 0.572019] NET: Registered protocol family 31 [ 0.572019] Bluetooth: HCI device and connection manager initialized [ 0.572019] Bluetooth: HCI socket layer initialized [ 0.572019] NET: Registered protocol family 8 [ 0.572021] NET: Registered protocol family 20 [ 0.572031] NetLabel: Initializing [ 0.572032] NetLabel: domain hash size = 128 [ 0.572034] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.572045] NetLabel: unlabeled traffic allowed by default [ 0.572059] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31 [ 0.572064] hpet0: 4 comparators, 64-bit 25.000000 MHz counter [ 0.576050] AppArmor: AppArmor Filesystem Enabled [ 0.580008] Switched to high resolution mode on CPU 0 [ 0.580717] Switched to high resolution mode on CPU 1 [ 0.584007] pnp: PnP ACPI init [ 0.584016] ACPI: bus type pnp registered [ 0.585217] pnp 00:03: mem resource (0xf0600000-0xf0607fff) overlaps 0000:00:03.5 BAR 0 (0xf0600000-0xf067ffff), disabling [ 0.591076] pnp: PnP ACPI: found 13 devices [ 0.591078] ACPI: ACPI bus type pnp unregistered [ 0.591081] PnPBIOS: Disabled by ACPI PNP [ 0.591090] system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.591092] system 00:00: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.591095] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.591098] system 00:00: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.591106] system 00:04: ioport range 0x1000-0x107f has been reserved [ 0.591109] system 00:04: ioport range 0x1080-0x10ff has been reserved [ 0.591111] system 00:04: ioport range 0x1400-0x147f has been reserved [ 0.591113] system 00:04: ioport range 0x1480-0x14ff has been reserved [ 0.591115] system 00:04: ioport range 0x1800-0x187f has been reserved [ 0.591118] system 00:04: ioport range 0x1880-0x18ff has been reserved [ 0.591124] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.591126] system 00:07: ioport range 0x910-0x911 has been reserved [ 0.591128] system 00:07: ioport range 0x295-0x296 has been reserved [ 0.625849] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 [ 0.625851] pci 0000:00:09.0: IO window: disabled [ 0.625855] pci 0000:00:09.0: MEM window: 0xf0500000-0xf05fffff [ 0.625859] pci 0000:00:09.0: PREFETCH window: disabled [ 0.625863] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02 [ 0.625865] pci 0000:00:0c.0: IO window: disabled [ 0.625875] pci 0000:00:0c.0: MEM window: disabled [ 0.625882] pci 0000:00:0c.0: PREFETCH window: disabled [ 0.625897] pci 0000:03:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff] [ 0.625899] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 [ 0.625902] pci 0000:00:10.0: IO window: 0x4000-0x4fff [ 0.625905] pci 0000:00:10.0: MEM window: 0xcc000000-0xccffffff [ 0.625908] pci 0000:00:10.0: PREFETCH window: 0x000000ce000000-0x000000dfffffff [ 0.625913] pci 0000:00:15.0: PCI bridge, secondary bus 0000:04 [ 0.625918] pci 0000:00:15.0: IO window: 0x5000-0x5fff [ 0.625928] pci 0000:00:15.0: MEM window: 0xf0200000-0xf03fffff [ 0.625936] pci 0000:00:15.0: PREFETCH window: 0x000000f0000000-0x000000f01fffff [ 0.625949] pci 0000:00:16.0: PCI bridge, secondary bus 0000:06 [ 0.625950] pci 0000:00:16.0: IO window: disabled [ 0.625961] pci 0000:00:16.0: MEM window: 0xf0400000-0xf04fffff [ 0.625968] pci 0000:00:16.0: PREFETCH window: disabled [ 0.625981] pci 0000:00:17.0: PCI bridge, secondary bus 0000:07 [ 0.625983] pci 0000:00:17.0: IO window: disabled [ 0.625993] pci 0000:00:17.0: MEM window: disabled [ 0.626000] pci 0000:00:17.0: PREFETCH window: disabled [ 0.626013] pci 0000:00:18.0: PCI bridge, secondary bus 0000:08 [ 0.626015] pci 0000:00:18.0: IO window: disabled [ 0.626025] pci 0000:00:18.0: MEM window: disabled [ 0.626032] pci 0000:00:18.0: PREFETCH window: disabled [ 0.626050] pci 0000:00:09.0: setting latency timer to 64 [ 0.626433] ACPI: PCI Interrupt Link [Z00Q] enabled at IRQ 23 [ 0.626437] pci 0000:00:0c.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23 [ 0.626446] pci 0000:00:0c.0: setting latency timer to 64 [ 0.626454] pci 0000:00:10.0: setting latency timer to 64 [ 0.626828] ACPI: PCI Interrupt Link [Z012] enabled at IRQ 22 [ 0.626832] pci 0000:00:15.0: PCI INT A -> Link[Z012] -> GSI 22 (level, low) -> IRQ 22 [ 0.626841] pci 0000:00:15.0: setting latency timer to 64 [ 0.627215] ACPI: PCI Interrupt Link [Z016] enabled at IRQ 21 [ 0.627219] pci 0000:00:16.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21 [ 0.627228] pci 0000:00:16.0: setting latency timer to 64 [ 0.627602] ACPI: PCI Interrupt Link [Z01A] enabled at IRQ 20 [ 0.627606] pci 0000:00:17.0: PCI INT A -> Link[Z01A] -> GSI 20 (level, low) -> IRQ 20 [ 0.627615] pci 0000:00:17.0: setting latency timer to 64 [ 0.627989] ACPI: PCI Interrupt Link [Z01E] enabled at IRQ 19 [ 0.627993] pci 0000:00:18.0: PCI INT A -> Link[Z01E] -> GSI 19 (level, low) -> IRQ 19 [ 0.628006] pci 0000:00:18.0: setting latency timer to 64 [ 0.628011] bus: 00 index 0 io port: [0x00-0xffff] [ 0.628013] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.628015] bus: 01 index 0 mmio: [0x0-0x0] [ 0.628017] bus: 01 index 1 mmio: [0xf0500000-0xf05fffff] [ 0.628019] bus: 01 index 2 mmio: [0x0-0x0] [ 0.628021] bus: 01 index 3 io port: [0x00-0xffff] [ 0.628023] bus: 01 index 4 mmio: [0x000000-0xffffffff] [ 0.628025] bus: 02 index 0 mmio: [0x0-0x0] [ 0.628026] bus: 02 index 1 mmio: [0x0-0x0] [ 0.628028] bus: 02 index 2 mmio: [0x0-0x0] [ 0.628029] bus: 02 index 3 mmio: [0x0-0x0] [ 0.628031] bus: 03 index 0 io port: [0x4000-0x4fff] [ 0.628033] bus: 03 index 1 mmio: [0xcc000000-0xccffffff] [ 0.628035] bus: 03 index 2 mmio: [0xce000000-0xdfffffff] [ 0.628037] bus: 03 index 3 mmio: [0x0-0x0] [ 0.628039] bus: 04 index 0 io port: [0x5000-0x5fff] [ 0.628040] bus: 04 index 1 mmio: [0xf0200000-0xf03fffff] [ 0.628042] bus: 04 index 2 mmio: [0xf0000000-0xf01fffff] [ 0.628044] bus: 04 index 3 mmio: [0x0-0x0] [ 0.628046] bus: 06 index 0 mmio: [0x0-0x0] [ 0.628048] bus: 06 index 1 mmio: [0xf0400000-0xf04fffff] [ 0.628049] bus: 06 index 2 mmio: [0x0-0x0] [ 0.628051] bus: 06 index 3 mmio: [0x0-0x0] [ 0.628053] bus: 07 index 0 mmio: [0x0-0x0] [ 0.628054] bus: 07 index 1 mmio: [0x0-0x0] [ 0.628056] bus: 07 index 2 mmio: [0x0-0x0] [ 0.628058] bus: 07 index 3 mmio: [0x0-0x0] [ 0.628059] bus: 08 index 0 mmio: [0x0-0x0] [ 0.628061] bus: 08 index 1 mmio: [0x0-0x0] [ 0.628062] bus: 08 index 2 mmio: [0x0-0x0] [ 0.628064] bus: 08 index 3 mmio: [0x0-0x0] [ 0.628071] NET: Registered protocol family 2 [ 0.640047] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.640258] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.640522] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.640662] TCP: Hash tables configured (established 131072 bind 65536) [ 0.640664] TCP reno registered [ 0.644058] NET: Registered protocol family 1 [ 0.644151] checking if image is initramfs... it is [ 1.245018] Freeing initrd memory: 7352k freed [ 1.245053] Simple Boot Flag at 0x36 set to 0x1 [ 1.245208] cpufreq: No nForce2 chipset. [ 1.245330] audit: initializing netlink socket (disabled) [ 1.245350] type=2000 audit(1270814392.244:1): initialized [ 1.252536] highmem bounce pool size: 64 pages [ 1.252540] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.253772] VFS: Disk quotas dquot_6.5.1 [ 1.253824] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.254369] fuse init (API version 7.10) [ 1.254445] msgmni has been set to 1678 [ 1.254595] alg: No test for stdrng (krng) [ 1.254605] io scheduler noop registered [ 1.254607] io scheduler anticipatory registered [ 1.254609] io scheduler deadline registered [ 1.254621] io scheduler cfq registered (default) [ 1.254971] pci 0000:03:00.0: Boot video device [ 1.266764] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 1.266924] pcieport-driver 0000:00:0c.0: found MSI capability [ 1.267011] pcieport-driver 0000:00:0c.0: irq 2303 for MSI/MSI-X [ 1.267047] pci_express 0000:00:0c.0:pcie00: allocate port service [ 1.267229] pcieport-driver 0000:00:15.0: setting latency timer to 64 [ 1.267387] pcieport-driver 0000:00:15.0: found MSI capability [ 1.267472] pcieport-driver 0000:00:15.0: irq 2302 for MSI/MSI-X [ 1.267507] pci_express 0000:00:15.0:pcie00: allocate port service [ 1.267677] pcieport-driver 0000:00:16.0: setting latency timer to 64 [ 1.267834] pcieport-driver 0000:00:16.0: found MSI capability [ 1.267919] pcieport-driver 0000:00:16.0: irq 2301 for MSI/MSI-X [ 1.267954] pci_express 0000:00:16.0:pcie00: allocate port service [ 1.268131] pcieport-driver 0000:00:17.0: setting latency timer to 64 [ 1.268289] pcieport-driver 0000:00:17.0: found MSI capability [ 1.268373] pcieport-driver 0000:00:17.0: irq 2300 for MSI/MSI-X [ 1.268409] pci_express 0000:00:17.0:pcie00: allocate port service [ 1.268579] pcieport-driver 0000:00:18.0: setting latency timer to 64 [ 1.268736] pcieport-driver 0000:00:18.0: found MSI capability [ 1.268821] pcieport-driver 0000:00:18.0: irq 2299 for MSI/MSI-X [ 1.268856] pci_express 0000:00:18.0:pcie00: allocate port service [ 1.269004] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.269012] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.272408] ACPI: AC Adapter [ADP0] (on-line) [ 1.275354] ACPI: EC: GPE storm detected, transactions will use polling mode [ 1.522550] ACPI: Battery Slot [BAT0] (battery present) [ 1.522624] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.522626] ACPI: Power Button (FF) [PWRF] [ 1.522666] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.522668] ACPI: Power Button (CM) [PWRB] [ 1.522716] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2c/PNP0C0E:00/input/input2 [ 1.522718] ACPI: Sleep Button (CM) [SLPB] [ 1.522768] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 [ 1.525438] ACPI: Lid Switch [LID] [ 1.526168] ACPI: SSDT AFEE1044, 01DD (r1 PmRef Cpu0Ist 3000 INTL 20050228) [ 1.527035] ACPI: SSDT AFEE15C4, 067D (r1 PmRef Cpu0Cst 3001 INTL 20050228) [ 1.529053] Monitor-Mwait will be used to enter C-1 state [ 1.529056] Monitor-Mwait will be used to enter C-2 state [ 1.529059] Monitor-Mwait will be used to enter C-3 state [ 1.529071] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 1.529093] processor ACPI_CPU:00: registered as cooling_device0 [ 1.529097] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.529485] ACPI: SSDT AFEE0ED6, 016E (r1 PmRef Cpu1Ist 3000 INTL 20050228) [ 1.529947] ACPI: SSDT AFEE153F, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228) [ 1.530791] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 1.530809] processor ACPI_CPU:01: registered as cooling_device1 [ 1.530812] ACPI: Processor [CPU1] (supports 8 throttling states) [ 1.539151] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.036007] ACPI: EC: missing confirmations, switch off interrupt mode. [ 2.038586] ACPI: Thermal Zone [THRM] (28 C) [ 2.038644] isapnp: Scanning for PnP cards... [ 2.391530] isapnp: No Plug & Play device found [ 2.405210] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.406161] brd: module loaded [ 2.406434] loop: module loaded [ 2.406490] Fixed MDIO Bus: probed [ 2.406495] PPP generic driver version 2.4.2 [ 2.406546] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 2.406574] Driver 'sd' needs updating - please use bus_type methods [ 2.406582] Driver 'sr' needs updating - please use bus_type methods [ 2.406617] ahci 0000:00:0b.0: version 3.0 [ 2.406999] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18 [ 2.407006] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 18 (level, low) -> IRQ 18 [ 2.407040] ahci 0000:00:0b.0: irq 2298 for MSI/MSI-X [ 2.407102] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.407106] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part [ 2.407109] ahci 0000:00:0b.0: setting latency timer to 64 [ 2.407451] scsi0 : ahci [ 2.407532] scsi1 : ahci [ 2.407583] scsi2 : ahci [ 2.407631] scsi3 : ahci [ 2.407681] scsi4 : ahci [ 2.407732] scsi5 : ahci [ 2.407831] ata1: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884100 irq 2298 [ 2.407834] ata2: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884180 irq 2298 [ 2.407836] ata3: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884200 irq 2298 [ 2.407838] ata4: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884280 irq 2298 [ 2.407840] ata5: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884300 irq 2298 [ 2.407843] ata6: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884380 irq 2298 [ 2.888012] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.889623] ata1.00: ATA-8: ST9500325AS, 0003DEM1, max UDMA/133 [ 2.889626] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.891648] ata1.00: configured for UDMA/133 [ 3.776011] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.781629] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS20N, A110, max UDMA/133, ATAPI AN [ 3.786981] ata2.00: configured for UDMA/133 [ 4.108009] ata3: SATA link down (SStatus 0 SControl 300) [ 4.428009] ata4: SATA link down (SStatus 0 SControl 300) [ 4.748009] ata5: SATA link down (SStatus 0 SControl 300) [ 5.068009] ata6: SATA link down (SStatus 0 SControl 300) [ 5.068100] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0003 PQ: 0 ANSI: 5 [ 5.068184] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 5.068199] sd 0:0:0:0: [sda] Write Protect is off [ 5.068201] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.068224] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.068282] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 5.068296] sd 0:0:0:0: [sda] Write Protect is off [ 5.068298] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.068320] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.068323] sda: sda1 sda2 sda3 sda4 < sda5 > [ 5.156275] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.156312] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.159814] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS20N A110 PQ: 0 ANSI: 5 [ 5.171140] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy [ 5.171143] Uniform CD-ROM driver Revision: 3.20 [ 5.171225] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.171259] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.171929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.172331] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23 [ 5.172335] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, low) -> IRQ 23 [ 5.172346] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 5.172349] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 5.172402] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 [ 5.172424] ehci_hcd 0000:00:04.1: debug port 1 [ 5.172429] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported [ 5.172441] ehci_hcd 0000:00:04.1: irq 23, io mem 0xf0889000 [ 5.184009] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 5.184064] usb usb1: configuration #1 chosen from 1 choice [ 5.184091] hub 1-0:1.0: USB hub found [ 5.184097] hub 1-0:1.0: 4 ports detected [ 5.184548] ACPI: PCI Interrupt Link [Z00P] enabled at IRQ 22 [ 5.184551] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 22 (level, low) -> IRQ 22 [ 5.184560] ehci_hcd 0000:00:06.1: setting latency timer to 64 [ 5.184563] ehci_hcd 0000:00:06.1: EHCI Host Controller [ 5.184605] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2 [ 5.184624] ehci_hcd 0000:00:06.1: debug port 1 [ 5.184629] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported [ 5.184646] ehci_hcd 0000:00:06.1: irq 22, io mem 0xf0889400 [ 5.196008] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00 [ 5.196061] usb usb2: configuration #1 chosen from 1 choice [ 5.196084] hub 2-0:1.0: USB hub found [ 5.196090] hub 2-0:1.0: 3 ports detected [ 5.196166] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.196550] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21 [ 5.196553] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, low) -> IRQ 21 [ 5.196563] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 5.196566] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 5.196606] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3 [ 5.196623] ohci_hcd 0000:00:04.0: irq 21, io mem 0xf0886000 [ 5.254043] usb usb3: configuration #1 chosen from 1 choice [ 5.254066] hub 3-0:1.0: USB hub found [ 5.254073] hub 3-0:1.0: 4 ports detected [ 5.254519] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 20 [ 5.254522] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 20 (level, low) -> IRQ 20 [ 5.254532] ohci_hcd 0000:00:06.0: setting latency timer to 64 [ 5.254534] ohci_hcd 0000:00:06.0: OHCI Host Controller [ 5.254573] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4 [ 5.254590] ohci_hcd 0000:00:06.0: irq 20, io mem 0xf0887000 [ 5.310044] usb usb4: configuration #1 chosen from 1 choice [ 5.310067] hub 4-0:1.0: USB hub found [ 5.310074] hub 4-0:1.0: 3 ports detected [ 5.310148] uhci_hcd: USB Universal Host Controller Interface driver [ 5.310219] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 5.315589] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.315594] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.316033] mice: PS/2 mouse device common for all mice [ 5.336068] rtc_cmos 00:0a: RTC can wake from S4 [ 5.336097] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0 [ 5.336144] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 5.336193] device-mapper: uevent: version 1.0.3 [ 5.336265] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 5.336326] device-mapper: multipath: version 1.0.5 loaded [ 5.336338] device-mapper: multipath round-robin: version 1.0.0 loaded [ 5.336403] EISA: Probing bus 0 at eisa.0 [ 5.336408] Cannot allocate resource for EISA slot 1 [ 5.336410] Cannot allocate resource for EISA slot 2 [ 5.336412] Cannot allocate resource for EISA slot 3 [ 5.336414] Cannot allocate resource for EISA slot 4 [ 5.336416] Cannot allocate resource for EISA slot 5 [ 5.336426] EISA: Detected 0 cards. [ 5.336525] cpuidle: using governor ladder [ 5.336639] cpuidle: using governor menu [ 5.337102] TCP cubic registered [ 5.337195] NET: Registered protocol family 10 [ 5.337253] Marking TSC unstable due to TSC halts in idle [ 5.337591] lo: Disabled Privacy Extensions [ 5.337899] NET: Registered protocol family 17 [ 5.337914] Bluetooth: L2CAP ver 2.11 [ 5.337916] Bluetooth: L2CAP socket layer initialized [ 5.337918] Bluetooth: SCO (Voice Link) ver 0.6 [ 5.337920] Bluetooth: SCO socket layer initialized [ 5.337947] Bluetooth: RFCOMM socket layer initialized [ 5.337952] Bluetooth: RFCOMM TTY layer initialized [ 5.337954] Bluetooth: RFCOMM ver 1.10 [ 5.338442] Using IPI No-Shortcut mode [ 5.338502] registered taskstats version 1 [ 5.338609] Magic number: 6:271:984 [ 5.338706] rtc_cmos 00:0a: setting system clock to 2010-04-09 11:59:57 UTC (1270814397) [ 5.338709] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 5.338710] EDD information not available. [ 5.338734] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 5.338938] Freeing unused kernel memory: 532k freed [ 5.339054] Write protecting the kernel text: 4120k [ 5.339096] Write protecting the kernel read-only data: 1524k [ 5.524771] usb 2-3: new high speed USB device using ehci_hcd and address 2 [ 5.620794] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 5.621235] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 19 [ 5.621240] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 19 (level, low) -> IRQ 19 [ 5.621244] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 5.742750] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 [ 5.742759] ohci1394 0000:01:07.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11 [ 5.794482] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[f0500000-f05007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 5.823869] usb 2-3: configuration #1 chosen from 1 choice [ 6.140876] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 0, addr 00:26:b9:0b:2e:f3 [ 6.140880] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 6.224302] PM: Starting manual resume from disk [ 6.224304] PM: Resume from partition 8:5 [ 6.224306] PM: Checking hibernation image. [ 6.224546] PM: Resume from disk failed. [ 6.296797] kjournald starting. Commit interval 5 seconds [ 6.296806] EXT3-fs: mounted filesystem with ordered data mode. [ 6.500031] Clocksource tsc unstable (delta = -85140543 ns) [ 7.088166] ieee1394: Host added: ID:BUS[0-00:1023] GUID[354fc00028e3f221] [ 12.103865] udev: starting version 141 [ 12.378982] ieee80211_crypt: registered algorithm 'NULL' [ 12.381293] wl: module license 'MIXED/Proprietary' taints kernel. [ 12.383197] wl 0000:06:00.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21 [ 12.383208] wl 0000:06:00.0: setting latency timer to 64 [ 12.388291] CE: hpet increasing min_delta_ns to 15000 nsec [ 12.388681] CE: hpet increasing min_delta_ns to 22500 nsec [ 12.431600] sdhci: Secure Digital Host Controller Interface driver [ 12.431603] sdhci: Copyright(c) Pierre Ossman [ 12.432146] ricoh-mmc: Ricoh MMC Controller disabling driver [ 12.432148] ricoh-mmc: Copyright(c) Philip Langdale [ 12.432175] ricoh-mmc: Ricoh MMC controller found at 0000:01:07.2 [1180:0843] (rev 12) [ 12.432193] ricoh-mmc: Controller is now disabled. [ 12.432864] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 12.614378] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 12.615664] ieee80211_crypt: registered algorithm 'TKIP' [ 12.615814] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.91.9 [ 12.627631] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.627763] acpi device:0d: registered as cooling_device2 [ 12.629912] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/device:0c/input/input7 [ 12.633161] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no) [ 12.652244] acpi device:16: registered as cooling_device3 [ 12.652325] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:13/device:14/input/input8 [ 12.653463] sdhci-pci 0000:01:07.1: SDHCI controller found [1180:0822] (rev 22) [ 12.653854] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11 [ 12.653859] sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 [ 12.653903] sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 12.653944] mmc0: SDHCI controller on PCI [0000:01:07.1] using DMA [ 12.664112] ACPI: Video Device [Z01I] (multi-head: yes rom: yes post: no) [ 12.706441] Linux video capture interface: v2.00 [ 12.758532] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 12.814008] uvcvideo: Found UVC 1.00 device Integrated Webcam (05ca:18a0) [ 12.814572] input: Integrated Webcam as /devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.0/input/input9 [ 12.815501] usbcore: registered new interface driver uvcvideo [ 12.815529] USB Video Class driver (v0.1.0) [ 12.834451] Linux agpgart interface v0.103 [ 13.381591] HDA Intel 0000:00:08.0: power state changed by ACPI to D0 [ 13.381975] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17 [ 13.381982] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17 [ 13.381985] hda_intel: probe_mask set to 0x9 for device 1028:0271 [ 13.382090] HDA Intel 0000:00:08.0: setting latency timer to 64 [ 13.518039] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 18 [ 13.518043] nvidia 0000:03:00.0: PCI INT A -> Link[LGPU] -> GSI 18 (level, low) -> IRQ 18 [ 13.518049] nvidia 0000:03:00.0: setting latency timer to 64 [ 13.518211] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009 [ 13.672505] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000 [ 13.724218] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10 [ 14.681960] lp: driver loaded but no devices found [ 14.745913] Adding 2771172k swap on /dev/sda5. Priority:-1 extents:1 across:2771172k [ 15.283099] EXT3 FS on sda3, internal journal [ 16.315548] type=1505 audit(1270814408.474:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2147 [ 16.357773] type=1505 audit(1270814408.517:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2151 [ 16.357854] type=1505 audit(1270814408.517:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2151 [ 16.357893] type=1505 audit(1270814408.517:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2151 [ 16.357930] type=1505 audit(1270814408.517:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2151 [ 16.474529] type=1505 audit(1270814408.634:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2156 [ 16.474671] type=1505 audit(1270814408.634:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2156 [ 16.499436] type=1505 audit(1270814408.658:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2160 [ 19.795378] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.795381] Bluetooth: BNEP filters: protocol multicast [ 19.823003] Bridge firewalling registered [ 21.494466] ppdev: user-space parallel port driver