[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000002dfd0000 (usable) [ 0.000000] BIOS-e820: 000000002dfd0000 - 000000002dfdf000 (ACPI data) [ 0.000000] BIOS-e820: 000000002dfdf000 - 000000002e000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x2dfd0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFE0000000 write-back [ 0.000000] 1 base 0020000000 mask FFF0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000002dfd0000 (usable) [ 0.000000] modified: 000000002dfd0000 - 000000002dfdf000 (ACPI data) [ 0.000000] modified: 000000002dfdf000 - 000000002e000000 (ACPI NVS) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000002dfd0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 002dc00000 page 2M [ 0.000000] 002dc00000 - 002dfd0000 page 4k [ 0.000000] kernel direct mapping tables up to 2dfd0000 @ 10000-15000 [ 0.000000] RAMDISK: 22081000 - 2281b20c [ 0.000000] ACPI: RSDP 000f7670 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 2dfd0000 00030 (v01 A M I OEMRSDT 04000527 MSFT 00000097) [ 0.000000] ACPI: FACP 2dfd0200 00081 (v02 A M I OEMFACP 04000527 MSFT 00000097) [ 0.000000] ACPI: DSDT 2dfd03f0 03499 (v01 UW F09_____ 00000000 INTL 02002026) [ 0.000000] ACPI: FACS 2dfdf000 00040 [ 0.000000] ACPI: APIC 2dfd0390 00054 (v01 A M I OEMAPIC 04000527 MSFT 00000097) [ 0.000000] ACPI: OEMB 2dfdf040 00109 (v01 A M I AMI_OEM 04000527 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 735MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 2dfd0000 [ 0.000000] low ram: 0 - 2dfd0000 [ 0.000000] node 0 low ram: 00000000 - 2dfd0000 [ 0.000000] node 0 bootmap 00011000 - 00016bfc [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 002dfd0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] [ 0.000000] #4 [0022081000 - 002281b20c] RAMDISK ==> [0022081000 - 002281b20c] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [00008da000 - 00008dd14d] BRK ==> [00008da000 - 00008dd14d] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000017000] BOOTMAP ==> [0000011000 - 0000017000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0002dfd0 [ 0.000000] HighMem 0x0002dfd0 -> 0x0002dfd0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0002dfd0 [ 0.000000] On node 0 totalpages: 188255 [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1440 pages used for memmap [ 0.000000] Normal zone: 182832 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 2e000000 (gap: 2e000000:d1f80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36024 r0 d21320 u4194304 [ 0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186783 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=40ae7dba-9766-4e65-a464-8497392adb67 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 3767040 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 726448k/753472k available (4673k kernel code, 26304k reserved, 2122k data, 656k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xee7d0000 - 0xff7fe000 ( 272 MB) [ 0.000000] lowmem : 0xc0000000 - 0xedfd0000 ( 735 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) [ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB) [ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 798.226 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 1596.45 BogoMIPS (lpj=3192904) [ 0.004046] Security Framework initialized [ 0.004090] AppArmor: AppArmor initialized [ 0.004107] Mount-cache hash table entries: 512 [ 0.004331] Initializing cgroup subsys ns [ 0.004339] Initializing cgroup subsys cpuacct [ 0.004349] Initializing cgroup subsys memory [ 0.004366] Initializing cgroup subsys devices [ 0.004373] Initializing cgroup subsys freezer [ 0.004378] Initializing cgroup subsys net_cls [ 0.004413] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004420] CPU: L2 Cache: 128K (64 bytes/line) [ 0.004428] mce: CPU supports 5 MCE banks [ 0.004457] Performance Events: AMD PMU driver. [ 0.004476] ... version: 0 [ 0.004481] ... bit width: 48 [ 0.004485] ... generic registers: 4 [ 0.004491] ... value mask: 0000ffffffffffff [ 0.004496] ... max period: 00007fffffffffff [ 0.004501] ... fixed-purpose events: 0 [ 0.004506] ... event mask: 000000000000000f [ 0.004515] Checking 'hlt' instruction... OK. [ 0.020006] Disabling 4MB page tables to avoid TLB bug [ 0.021596] SMP alternatives: switching to UP code [ 0.035940] Freeing SMP alternatives: 19k freed [ 0.035974] ACPI: Core revision 20090903 [ 0.047247] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.047260] ftrace: allocating 21771 entries in 43 pages [ 0.048133] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.048417] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.089328] CPU0: Mobile AMD Sempron(tm) Processor 3000+ stepping 00 [ 0.092001] Brought up 1 CPUs [ 0.092001] Total of 1 processors activated (1596.45 BogoMIPS). [ 0.092001] CPU0 attaching NULL sched-domain. [ 0.092001] devtmpfs: initialized [ 0.092001] regulator: core version 0.5 [ 0.092001] Time: 18:55:47 Date: 05/03/10 [ 0.092001] NET: Registered protocol family 16 [ 0.092001] EISA bus registered [ 0.092001] ACPI: bus type pci registered [ 0.092001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 [ 0.092001] PCI: Using configuration type 1 for base access [ 0.092802] bio: create slab at 0 [ 0.093761] ACPI: EC: Look up EC in DSDT [ 0.094848] ACPI: Executed 1 blocks of module-level executable AML code [ 0.101416] ACPI: Interpreter enabled [ 0.101431] ACPI: (supports S0 S3 S4 S5) [ 0.101481] ACPI: Using IOAPIC for interrupt routing [ 0.102152] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.112382] ACPI: EC: GPE = 0x2, I/O: command/status = 0x66, data = 0x62 [ 0.112544] ACPI Warning: Incorrect checksum in table [OEMB] - 0F, should be 03 (20090903/tbutils-314) [ 0.112740] ACPI: No dock devices found. [ 0.112903] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.112984] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe1ffffff] [ 0.113123] pci 0000:00:02.0: Enabling SiS 96x SMBus [ 0.113171] pci 0000:00:02.1: reg 20 io port: [0xc00-0xc1f] [ 0.113227] pci 0000:00:02.5: reg 20 io port: [0xffa0-0xffaf] [ 0.113276] pci 0000:00:02.6: reg 10 io port: [0xe400-0xe4ff] [ 0.113288] pci 0000:00:02.6: reg 14 io port: [0xe000-0xe07f] [ 0.113328] pci 0000:00:02.6: supports D1 D2 [ 0.113335] pci 0000:00:02.6: PME# supported from D3hot D3cold [ 0.113344] pci 0000:00:02.6: PME# disabled [ 0.113386] pci 0000:00:02.7: reg 10 io port: [0xe800-0xe8ff] [ 0.113398] pci 0000:00:02.7: reg 14 io port: [0xec00-0xec7f] [ 0.113439] pci 0000:00:02.7: supports D1 D2 [ 0.113445] pci 0000:00:02.7: PME# supported from D3hot D3cold [ 0.113454] pci 0000:00:02.7: PME# disabled [ 0.113482] pci 0000:00:03.0: reg 10 32bit mmio: [0xdfffd000-0xdfffdfff] [ 0.113535] pci 0000:00:03.1: reg 10 32bit mmio: [0xdfffe000-0xdfffefff] [ 0.113598] pci 0000:00:03.3: reg 10 32bit mmio: [0xdffff000-0xdfffffff] [ 0.113641] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.113650] pci 0000:00:03.3: PME# disabled [ 0.113691] pci 0000:00:04.0: reg 10 io port: [0xd800-0xd8ff] [ 0.113704] pci 0000:00:04.0: reg 14 32bit mmio: [0xdfffc000-0xdfffcfff] [ 0.113731] pci 0000:00:04.0: reg 30 32bit mmio pref: [0xdffc0000-0xdffdffff] [ 0.113754] pci 0000:00:04.0: supports D1 D2 [ 0.113760] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.113769] pci 0000:00:04.0: PME# disabled [ 0.113808] pci 0000:00:06.0: reg 10 32bit mmio: [0xdfffb800-0xdfffbfff] [ 0.113821] pci 0000:00:06.0: reg 14 32bit mmio: [0xdfff4000-0xdfff7fff] [ 0.113863] pci 0000:00:06.0: supports D1 D2 [ 0.113870] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot [ 0.113879] pci 0000:00:06.0: PME# disabled [ 0.113919] pci 0000:00:09.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.113942] pci 0000:00:09.0: supports D1 D2 [ 0.113949] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.113958] pci 0000:00:09.0: PME# disabled [ 0.113996] pci 0000:00:09.1: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.114019] pci 0000:00:09.1: supports D1 D2 [ 0.114025] pci 0000:00:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.114034] pci 0000:00:09.1: PME# disabled [ 0.114075] pci 0000:00:09.2: reg 10 32bit mmio: [0xdfffa000-0xdfffafff] [ 0.114121] pci 0000:00:09.2: supports D1 D2 [ 0.114128] pci 0000:00:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.114137] pci 0000:00:09.2: PME# disabled [ 0.114182] pci 0000:00:0b.0: reg 10 32bit mmio: [0xdfff8000-0xdfff9fff] [ 0.114227] pci 0000:00:0b.0: supports D1 D2 [ 0.114234] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.114243] pci 0000:00:0b.0: PME# disabled [ 0.114424] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff] [ 0.114436] pci 0000:01:00.0: reg 14 32bit mmio: [0xdfee0000-0xdfefffff] [ 0.114447] pci 0000:01:00.0: reg 18 io port: [0xcc00-0xcc7f] [ 0.114476] pci 0000:01:00.0: supports D1 D2 [ 0.114509] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.114519] pci 0000:00:01.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff] [ 0.114529] pci 0000:00:01.0: bridge 32bit mmio pref: [0xcfd00000-0xdfcfffff] [ 0.114576] pci_bus 0000:00: on NUMA node 0 [ 0.114587] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.149523] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.149773] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15) [ 0.150015] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15) [ 0.150256] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15) [ 0.150498] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 7 10 11 12 14 15) [ 0.152221] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 10 11 12 14 15) [ 0.152466] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.152709] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15) [ 0.152960] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.152967] vgaarb: loaded [ 0.153220] SCSI subsystem initialized [ 0.153349] libata version 3.00 loaded. [ 0.153503] usbcore: registered new interface driver usbfs [ 0.153532] usbcore: registered new interface driver hub [ 0.153585] usbcore: registered new device driver usb [ 0.153867] ACPI: WMI: Mapper loaded [ 0.153873] PCI: Using ACPI for IRQ routing [ 0.154196] NetLabel: Initializing [ 0.154201] NetLabel: domain hash size = 128 [ 0.154206] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.154235] NetLabel: unlabeled traffic allowed by default [ 0.154307] Switching to clocksource tsc [ 0.156078] AppArmor: AppArmor Filesystem Enabled [ 0.156114] pnp: PnP ACPI init [ 0.156147] ACPI: bus type pnp registered [ 0.159500] pnp: PnP ACPI: found 10 devices [ 0.159507] ACPI: ACPI bus type pnp unregistered [ 0.159515] PnPBIOS: Disabled by ACPI PNP [ 0.159545] system 00:07: ioport range 0x480-0x48f has been reserved [ 0.159553] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.159561] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.159569] system 00:07: ioport range 0x880-0x8ff has been reserved [ 0.159577] system 00:07: ioport range 0xc00-0xc1f has been reserved [ 0.159587] system 00:07: iomem range 0xfff80000-0xffffffff has been reserved [ 0.159596] system 00:07: iomem range 0xffe80000-0xffefffff has been reserved [ 0.159604] system 00:07: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.159619] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.159628] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.159641] system 00:09: iomem range 0x0-0x9ffff could not be reserved [ 0.159650] system 00:09: iomem range 0xc0000-0xd0fff could not be reserved [ 0.159658] system 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 0.159666] system 00:09: iomem range 0x100000-0x2fffffff could not be reserved [ 0.194600] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.194608] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.194617] pci 0000:00:01.0: MEM window: 0xdfe00000-0xdfefffff [ 0.194626] pci 0000:00:01.0: PREFETCH window: 0xcfd00000-0xdfcfffff [ 0.194637] pci 0000:00:09.0: CardBus bridge, secondary bus 0000:02 [ 0.194643] pci 0000:00:09.0: IO window: 0x001000-0x0010ff [ 0.194651] pci 0000:00:09.0: IO window: 0x001400-0x0014ff [ 0.194659] pci 0000:00:09.0: PREFETCH window: 0x30000000-0x33ffffff [ 0.194667] pci 0000:00:09.0: MEM window: 0x34000000-0x37ffffff [ 0.194675] pci 0000:00:09.1: CardBus bridge, secondary bus 0000:06 [ 0.194681] pci 0000:00:09.1: IO window: 0x001800-0x0018ff [ 0.194689] pci 0000:00:09.1: IO window: 0x001c00-0x001cff [ 0.194697] pci 0000:00:09.1: PREFETCH window: 0x38000000-0x3bffffff [ 0.194705] pci 0000:00:09.1: MEM window: 0x3c000000-0x3fffffff [ 0.194734] alloc irq_desc for 17 on node -1 [ 0.194739] alloc kstat_irqs on node -1 [ 0.194752] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.194767] pci 0000:00:09.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.194778] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.194785] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.194792] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.194799] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff] [ 0.194806] pci_bus 0000:01: resource 2 pref mem [0xcfd00000-0xdfcfffff] [ 0.194814] pci_bus 0000:02: resource 0 io: [0x1000-0x10ff] [ 0.194820] pci_bus 0000:02: resource 1 io: [0x1400-0x14ff] [ 0.194827] pci_bus 0000:02: resource 2 pref mem [0x30000000-0x33ffffff] [ 0.194834] pci_bus 0000:02: resource 3 mem: [0x34000000-0x37ffffff] [ 0.194841] pci_bus 0000:06: resource 0 io: [0x1800-0x18ff] [ 0.194848] pci_bus 0000:06: resource 1 io: [0x1c00-0x1cff] [ 0.194855] pci_bus 0000:06: resource 2 pref mem [0x38000000-0x3bffffff] [ 0.194862] pci_bus 0000:06: resource 3 mem: [0x3c000000-0x3fffffff] [ 0.194937] NET: Registered protocol family 2 [ 0.195141] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.195898] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.197558] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.198391] TCP: Hash tables configured (established 131072 bind 65536) [ 0.198399] TCP reno registered [ 0.198577] NET: Registered protocol family 1 [ 0.241661] pci 0000:01:00.0: Boot video device [ 0.242010] cpufreq-nforce2: No nForce2 chipset. [ 0.242067] Scanning for low memory corruption every 60 seconds [ 0.242291] audit: initializing netlink socket (disabled) [ 0.242320] type=2000 audit(1272912947.241:1): initialized [ 0.267571] Trying to unpack rootfs image as initramfs... [ 0.294180] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.302168] VFS: Disk quotas dquot_6.5.2 [ 0.302347] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.303710] fuse init (API version 7.13) [ 0.303917] msgmni has been set to 1419 [ 0.309985] alg: No test for stdrng (krng) [ 0.310170] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.310177] io scheduler noop registered [ 0.310182] io scheduler anticipatory registered [ 0.310187] io scheduler deadline registered [ 0.310278] io scheduler cfq registered (default) [ 0.310519] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.310571] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.312287] ACPI: AC Adapter [AC0] (on-line) [ 0.312452] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:03/PNP0C0D:00/input/input0 [ 0.312525] ACPI: Lid Switch [LID] [ 0.312629] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.312639] ACPI: Sleep Button [SLPB] [ 0.312746] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 0.312753] ACPI: Power Button [PWRB] [ 0.312850] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.312857] ACPI: Power Button [PWRF] [ 0.313273] Marking TSC unstable due to TSC halts in idle [ 0.313355] processor LNXCPU:00: registered as cooling_device0 [ 0.317655] Switching to clocksource acpi_pm [ 0.330424] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.330449] ACPI: Thermal Zone [THRM] (36 C) [ 0.333962] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.334558] alloc irq_desc for 18 on node -1 [ 0.334565] alloc kstat_irqs on node -1 [ 0.334581] serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.334593] serial 0000:00:02.6: PCI INT C disabled [ 0.340366] isapnp: Scanning for PnP cards... [ 0.347065] brd: module loaded [ 0.351366] loop: module loaded [ 0.351734] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 0.352062] pata_sis 0000:00:02.5: version 0.5.2 [ 0.352389] scsi0 : pata_sis [ 0.399302] scsi1 : pata_sis [ 0.401261] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.401270] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.402266] Fixed MDIO Bus: probed [ 0.402348] PPP generic driver version 2.4.2 [ 0.402466] tun: Universal TUN/TAP device driver, 1.6 [ 0.402471] tun: (C) 1999-2004 Max Krasnyansky [ 0.402666] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.402708] alloc irq_desc for 23 on node -1 [ 0.402714] alloc kstat_irqs on node -1 [ 0.402728] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.402757] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 0.402829] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 0.402882] ehci_hcd 0000:00:03.3: cache line size of 64 is not supported [ 0.402913] ehci_hcd 0000:00:03.3: irq 23, io mem 0xdffff000 [ 0.412183] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 0.412480] usb usb1: configuration #1 chosen from 1 choice [ 0.412549] hub 1-0:1.0: USB hub found [ 0.412571] hub 1-0:1.0: 6 ports detected [ 0.412705] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.412742] alloc irq_desc for 20 on node -1 [ 0.412747] alloc kstat_irqs on node -1 [ 0.412760] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.412789] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 0.412881] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 0.412929] ohci_hcd 0000:00:03.0: irq 20, io mem 0xdfffd000 [ 0.417594] ACPI: Battery Slot [BAT0] (battery present) [ 0.493943] usb usb2: configuration #1 chosen from 1 choice [ 0.494011] hub 2-0:1.0: USB hub found [ 0.494042] hub 2-0:1.0: 3 ports detected [ 0.494153] alloc irq_desc for 21 on node -1 [ 0.494159] alloc kstat_irqs on node -1 [ 0.494172] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.494206] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 0.494292] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 0.494336] ohci_hcd 0000:00:03.1: irq 21, io mem 0xdfffe000 [ 0.582144] usb usb3: configuration #1 chosen from 1 choice [ 0.582221] hub 3-0:1.0: USB hub found [ 0.582242] hub 3-0:1.0: 3 ports detected [ 0.582359] uhci_hcd: USB Universal Host Controller Interface driver [ 0.582533] PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.591246] i8042.c: Detected active multiplexing controller, rev 1.0. [ 0.592485] ata1.00: ATA-6: TOSHIBA MK8025GAS, KA023A, max UDMA/100 [ 0.592494] ata1.00: 156301488 sectors, multi 16: LBA [ 0.592548] ata1.00: limited to UDMA/33 due to 40-wire cable [ 0.596836] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.596857] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.596949] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.597014] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.597069] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.597396] mice: PS/2 mouse device common for all mice [ 0.597826] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.597866] rtc0: alarms up to one month, 114 bytes nvram [ 0.598202] device-mapper: uevent: version 1.0.3 [ 0.599775] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 0.603172] ata1.00: configured for UDMA/33 [ 0.603235] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.608806] device-mapper: multipath: version 1.1.0 loaded [ 0.608814] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.609141] EISA: Probing bus 0 at eisa.0 [ 0.609154] Cannot allocate resource for EISA slot 1 [ 0.609194] EISA: Detected 0 cards. [ 0.609383] cpuidle: using governor ladder [ 0.609526] cpuidle: using governor menu [ 0.610527] TCP cubic registered [ 0.610887] NET: Registered protocol family 10 [ 0.611941] lo: Disabled Privacy Extensions [ 0.612779] NET: Registered protocol family 17 [ 0.612862] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3000+ processors (1 cpu cores) (version 2.20.00) [ 0.612952] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x9 [ 0.612960] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xa [ 0.612968] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x18 [ 0.624077] Using IPI No-Shortcut mode [ 0.624198] PM: Resume from disk failed. [ 0.624213] registered taskstats version 1 [ 0.624440] Magic number: 10:19:948 [ 0.624478] tty tty5: hash matches [ 0.624534] rtc_cmos 00:02: setting system clock to 2010-05-03 18:55:48 UTC (1272912948) [ 0.624537] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.624540] EDD information not available. [ 0.779730] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 0.972113] Freeing initrd memory: 7784k freed [ 1.024541] isapnp: No Plug & Play device found [ 1.024710] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8025GA KA02 PQ: 0 ANSI: 5 [ 1.024906] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.025136] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.025189] sd 0:0:0:0: [sda] Write Protect is off [ 1.025192] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.025219] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.025418] sda: [ 1.025728] usb 1-3: configuration #1 chosen from 1 choice [ 1.090014] sda1 sda2 < sda5 > [ 1.114081] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.204246] ata2.00: ATAPI: _NEC DVD+/-RW ND-6500A, 2.40, max UDMA/33 [ 1.252257] ata2.00: configured for UDMA/33 [ 1.289139] scsi 1:0:0:0: CD-ROM _NEC DVD+-RW ND-6500A 2.40 PQ: 0 ANSI: 5 [ 1.411536] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.411541] Uniform CD-ROM driver Revision: 3.20 [ 1.411682] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.411750] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.411809] Freeing unused kernel memory: 656k freed [ 1.412600] Write protecting the kernel text: 4676k [ 1.412635] Write protecting the kernel read-only data: 1840k [ 1.438312] udev: starting version 151 [ 2.088582] sis900.c: v1.08.10 Apr. 2 2006 [ 2.088622] alloc irq_desc for 19 on node -1 [ 2.088625] alloc kstat_irqs on node -1 [ 2.088633] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.089753] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [ 2.099074] 0000:00:04.0: Using transceiver found at address 1 as default [ 2.128858] eth0: SiS 900 PCI Fast Ethernet at 0xd800, IRQ 19, 00:03:0d:24:3c:43 [ 2.128899] ohci1394 0000:00:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.172957] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 2.184285] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dfffb800-dfffbfff] Max Packet=[2048] IR/IT contexts=[4/8] [ 3.460228] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d532553016e] [ 22.401576] udev: starting version 151 [ 22.488888] Adding 2152668k swap on /dev/sda5. Priority:-1 extents:1 across:2152668k [ 22.889800] type=1505 audit(1272902170.763:2): operation="profile_load" pid=397 name="/sbin/dhclient3" [ 22.890126] type=1505 audit(1272902170.763:3): operation="profile_load" pid=397 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 22.890307] type=1505 audit(1272902170.763:4): operation="profile_load" pid=397 name="/usr/lib/connman/scripts/dhclient-script" [ 23.117361] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00 [ 23.121918] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 23.122625] Linux agpgart interface v0.103 [ 23.145873] yenta_cardbus 0000:00:09.0: CardBus bridge found [1734:106c] [ 23.145891] yenta_cardbus 0000:00:09.0: O2: res at 0x94/0xD4: 00/ea [ 23.145894] yenta_cardbus 0000:00:09.0: O2: enabling read prefetch/write burst [ 23.239751] lp: driver loaded but no devices found [ 23.272937] yenta_cardbus 0000:00:09.0: ISA IRQ mask 0x0ab8, PCI irq 17 [ 23.272942] yenta_cardbus 0000:00:09.0: Socket status: 30000006 [ 23.299333] yenta_cardbus 0000:00:09.1: CardBus bridge found [1734:106c] [ 23.363542] cfg80211: Calling CRDA to update world regulatory domain [ 23.424970] yenta_cardbus 0000:00:09.1: ISA IRQ mask 0x0ab8, PCI irq 17 [ 23.424975] yenta_cardbus 0000:00:09.1: Socket status: 30000006 [ 23.434027] cfg80211: World regulatory domain updated: [ 23.434033] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 23.434037] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.434040] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 23.434043] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 23.434046] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.434049] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 23.453687] agpgart-amd64 0000:00:00.0: AGP bridge [1039/0760] [ 23.462787] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xe0000000 [ 23.535175] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 23.536158] acpi device:02: registered as cooling_device1 [ 23.536816] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input6 [ 23.537017] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 23.564073] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.572119] p54pci 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 23.572173] p54pci 0000:00:0b.0: firmware: requesting isl3886pci [ 23.658329] vga16fb: initializing [ 23.658338] vga16fb: mapped to 0xc00a0000 [ 23.658529] fb0: VGA16 VGA frame buffer device [ 23.668774] usb 1-3: reset high speed USB device using ehci_hcd and address 2 [ 23.703186] phy0: p54 detected a LM86 firmware [ 23.703190] p54: rx_mtu reduced from 3240 to 2376 [ 23.703194] phy0: FW rev 2.13.12.0 - Softmac protocol 5.9 [ 23.703197] phy0: cryptographic accelerator WEP:YES, TKIP:YES, CCMP:YES [ 23.867342] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. [ 23.869005] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean. [ 23.869654] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. [ 23.869702] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. [ 23.870360] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. [ 24.024850] nf_conntrack version 0.5.0 (11487 buckets, 45948 max) [ 24.026432] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 24.026436] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 24.026439] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 24.086267] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x6eb1, caps: 0xa04711/0x40a [ 24.099434] phy1: Selected rate control algorithm 'minstrel' [ 24.100348] zd1211rw 1-3:1.0: phy1 [ 24.100376] usbcore: registered new interface driver zd1211rw [ 24.130298] udev: renamed network interface wlan0 to wlan2 [ 24.131246] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7 [ 24.153926] Console: switching to colour frame buffer device 80x30 [ 24.193567] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 24.195187] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 24.195836] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 24.195884] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 24.220660] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 24.315742] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 24.449011] type=1505 audit(1272902172.323:5): operation="profile_load" pid=713 name="/usr/share/gdm/guest-session/Xsession" [ 24.454638] type=1505 audit(1272902172.327:6): operation="profile_replace" pid=715 name="/sbin/dhclient3" [ 24.454974] type=1505 audit(1272902172.327:7): operation="profile_replace" pid=715 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 24.455164] type=1505 audit(1272902172.327:8): operation="profile_replace" pid=715 name="/usr/lib/connman/scripts/dhclient-script" [ 24.511396] type=1505 audit(1272902172.383:9): operation="profile_load" pid=718 name="/usr/bin/evince" [ 24.538849] type=1505 audit(1272902172.411:10): operation="profile_load" pid=718 name="/usr/bin/evince-previewer" [ 24.545618] usb 1-3: firmware: requesting zd1211/zd1211b_ub [ 24.563146] usb 1-3: firmware: requesting zd1211/zd1211b_uphr [ 24.569710] type=1505 audit(1272902172.443:11): operation="profile_load" pid=718 name="/usr/bin/evince-thumbnailer" [ 24.696041] zd1211rw 1-3:1.0: firmware version 4725 [ 24.734762] zd1211rw 1-3:1.0: zd1211b chip 0ace:1215 v4810 high 00-1a-9f AL2230_RF pa0 g--NS [ 24.737613] cfg80211: Calling CRDA for country: DE [ 24.754437] cfg80211: Regulatory domain changed to country: DE [ 24.754442] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 24.754446] (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 24.754449] (5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 24.754452] (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm) [ 24.761394] ADDRCONF(NETDEV_UP): wlan2: link is not ready [ 24.768895] eth0: Media Link Off [ 24.769204] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.064394] phy0: hwaddr 00:90:4b:ca:54:de, MAC:isl3890 RF:Frisbee [ 25.079645] phy0: Selected rate control algorithm 'minstrel' [ 25.080666] Registered led device: p54-phy0::assoc [ 25.080685] Registered led device: p54-phy0::tx [ 25.080703] Registered led device: p54-phy0::rx [ 25.080721] Registered led device: p54-phy0::radio [ 25.080729] p54pci 0000:00:0b.0: is registered as 'phy0' [ 25.081345] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18