[   20.436195] ppdev: user-space parallel port driver
[   39.620604] ath5k phy0: noise floor calibration timeout (2462MHz)
[   45.919404] wlan0: direct probe to AP 00:24:01:cf:d1:7b (try 1)
[   45.919446] wlan0: deauthenticating from 00:24:01:cf:d1:7b by local choice (reason=3)
[   45.919474] wlan0: direct probe to AP 00:24:01:cf:d1:7b (try 1)
[   45.921809] wlan0: direct probe responded
[   45.921817] wlan0: authenticate with AP 00:24:01:cf:d1:7b (try 1)
[   45.930723] wlan0: authenticated
[   45.930754] wlan0: associate with AP 00:24:01:cf:d1:7b (try 1)
[   45.933100] wlan0: RX AssocResp from 00:24:01:cf:d1:7b (capab=0x431 status=0 aid=2)
[   45.933104] wlan0: associated
[   45.933842] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   55.961035] wlan0: no IPv6 routers present
[  154.612440] ath5k phy0: noise floor calibration timeout (2462MHz)
[  395.506734] ath5k phy0: noise floor calibration timeout (2462MHz)
[  756.636726] ath5k phy0: noise floor calibration timeout (2462MHz)
[  877.013037] ath5k phy0: noise floor calibration timeout (2462MHz)
[ 1237.858229] ath5k phy0: noise floor calibration timeout (2462MHz)
[ 1358.208411] ath5k phy0: noise floor calibration timeout (2462MHz)
[ 1599.115036] ath5k phy0: noise floor calibration timeout (2462MHz)
[ 1839.818176] ath5k phy0: noise floor calibration timeout (2462MHz)
[ 1960.229786] ath5k phy0: noise floor calibration timeout (2462MHz)
[ 2321.586768] ath5k phy0: noise floor calibration timeout (2462MHz)
[ 2441.917179] ath5k phy0: noise floor calibration timeout (2462MHz)
[ 2562.512210] ath5k phy0: noise floor calibration timeout (2462MHz)
[ 2714.500145] No probe response from AP 00:24:01:cf:d1:7b after 500ms, disconnecting.
[ 2858.411228] wlan0: direct probe to AP 00:24:01:cf:d1:7b (try 1)
[ 2858.413699] wlan0: direct probe responded
[ 2858.413708] wlan0: authenticate with AP 00:24:01:cf:d1:7b (try 1)
[ 2858.415578] wlan0: authenticated
[ 2858.415617] wlan0: associate with AP 00:24:01:cf:d1:7b (try 1)
[ 2858.418295] wlan0: RX AssocResp from 00:24:01:cf:d1:7b (capab=0x431 status=0 aid=2)
[ 2858.418303] wlan0: associated
[ 4716.585913] ath5k phy0: unsupported jumbo
[ 5316.374464] ath5k phy0: noise floor calibration timeout (2462MHz)
[ 5592.404579] UDF-fs: No VRS found
[ 5592.404587] UDF-fs: No partition found (1)
[ 5644.137055] usb 4-4: new low speed USB device using ohci_hcd and address 2
[ 5644.352182] usb 4-4: configuration #1 chosen from 1 choice
[ 5644.416599] usbcore: registered new interface driver hiddev
[ 5644.423472] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:04.0/usb4/4-4/4-4:1.0/input/input11
[ 5644.423708] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:04.0-4/input0
[ 5644.423753] usbcore: registered new interface driver usbhid
[ 5644.424128] usbhid: v2.6:USB HID core driver
[10228.288620] ath5k phy0: noise floor calibration failed (2412MHz)
[10228.712259] ath5k phy0: noise floor calibration failed (2417MHz)
[10348.291872] ath5k phy0: noise floor calibration failed (2412MHz)
[10348.723923] ath5k phy0: noise floor calibration failed (2417MHz)
[10349.145628] ath5k phy0: noise floor calibration failed (2422MHz)
[10468.291688] ath5k phy0: noise floor calibration failed (2412MHz)
[10468.711654] ath5k phy0: noise floor calibration failed (2417MHz)
[10469.422017] ath5k phy0: noise floor calibration timeout (2422MHz)
[10588.291672] ath5k phy0: noise floor calibration failed (2412MHz)
[10588.711633] ath5k phy0: noise floor calibration failed (2417MHz)
[10589.132019] ath5k phy0: noise floor calibration failed (2422MHz)
[10699.243804] VFS: busy inodes on changed media or resized disk sr0
[10699.352799] VFS: busy inodes on changed media or resized disk sr0
[10699.461174] VFS: busy inodes on changed media or resized disk sr0
[10699.481210] VFS: busy inodes on changed media or resized disk sr0
[10699.537954] VFS: busy inodes on changed media or resized disk sr0
[10699.547749] VFS: busy inodes on changed media or resized disk sr0
[10708.287721] ath5k phy0: noise floor calibration failed (2412MHz)
[10708.707923] ath5k phy0: noise floor calibration failed (2417MHz)
[10709.128224] ath5k phy0: noise floor calibration failed (2422MHz)
[10778.415942] UDF-fs: No VRS found
[10778.415951] UDF-fs: No partition found (1)
[10778.453531] ISO 9660 Extensions: Microsoft Joliet Level 3
[10778.453554] ISOFS: changing to secondary root
[10796.681605] sr 2:0:0:0: [sr0] Unhandled sense code
[10796.681613] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10796.681623] sr 2:0:0:0: [sr0] Sense Key : Hardware Error [current] 
[10796.681633] sr 2:0:0:0: [sr0] Add. Sense: Timeout on logical unit
[10796.681644] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 1f 93 00 00 40 00
[10796.681664] end_request: I/O error, dev sr0, sector 32332
[10796.681674] Buffer I/O error on device sr0, logical block 8083
[10796.681682] Buffer I/O error on device sr0, logical block 8084
[10796.681695] Buffer I/O error on device sr0, logical block 8085
[10796.681701] Buffer I/O error on device sr0, logical block 8086
[10796.681708] Buffer I/O error on device sr0, logical block 8087
[10796.681714] Buffer I/O error on device sr0, logical block 8088
[10796.681721] Buffer I/O error on device sr0, logical block 8089
[10796.681727] Buffer I/O error on device sr0, logical block 8090
[10796.681733] Buffer I/O error on device sr0, logical block 8091
[10796.681740] Buffer I/O error on device sr0, logical block 8092
[10797.399755] sr 2:0:0:0: [sr0] Unhandled sense code
[10797.399764] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10797.399773] sr 2:0:0:0: [sr0] Sense Key : Medium Error [current] 
[10797.399783] sr 2:0:0:0: [sr0] Add. Sense: L-EC uncorrectable error
[10797.399793] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 1f d3 00 00 40 00
[10797.399812] end_request: I/O error, dev sr0, sector 32588
[10803.917617] sr 2:0:0:0: [sr0] Unhandled sense code
[10803.917626] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10803.917635] sr 2:0:0:0: [sr0] Sense Key : Hardware Error [current] 
[10803.917645] sr 2:0:0:0: [sr0] Add. Sense: Timeout on logical unit
[10803.917657] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 21 23 00 00 02 00
[10803.917677] end_request: I/O error, dev sr0, sector 33932
[10803.917687] __ratelimit: 118 callbacks suppressed
[10803.917693] Buffer I/O error on device sr0, logical block 8483
[10803.917701] Buffer I/O error on device sr0, logical block 8484
[10810.368025] sr 2:0:0:0: [sr0] Unhandled sense code
[10810.368030] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10810.368036] sr 2:0:0:0: [sr0] Sense Key : Hardware Error [current] 
[10810.368041] sr 2:0:0:0: [sr0] Add. Sense: Timeout on logical unit
[10810.368048] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 21 23 00 00 02 00
[10810.368058] end_request: I/O error, dev sr0, sector 33932
[10810.368065] Buffer I/O error on device sr0, logical block 8483
[10810.368070] Buffer I/O error on device sr0, logical block 8484
[10816.921128] sr 2:0:0:0: [sr0] Unhandled sense code
[10816.921136] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10816.921145] sr 2:0:0:0: [sr0] Sense Key : Hardware Error [current] 
[10816.921155] sr 2:0:0:0: [sr0] Add. Sense: Timeout on logical unit
[10816.921167] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 21 23 00 00 02 00
[10816.921187] end_request: I/O error, dev sr0, sector 33932
[10816.921197] Buffer I/O error on device sr0, logical block 8483
[10816.921206] Buffer I/O error on device sr0, logical block 8484
[10823.474289] sr 2:0:0:0: [sr0] Unhandled sense code
[10823.474297] sr 2:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[10823.474307] sr 2:0:0:0: [sr0] Sense Key : Hardware Error [current] 
[10823.474317] sr 2:0:0:0: [sr0] Add. Sense: Timeout on logical unit
[10823.474329] sr 2:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 21 23 00 00 02 00
[10823.474349] end_request: I/O error, dev sr0, sector 33932
[10823.474359] Buffer I/O error on device sr0, logical block 8483
[10823.474367] Buffer I/O error on device sr0, logical block 8484
[10828.287787] ath5k phy0: noise floor calibration failed (2412MHz)
[10828.711824] ath5k phy0: noise floor calibration failed (2417MHz)
[10829.136294] ath5k phy0: noise floor calibration failed (2422MHz)
[10858.238633] VFS: busy inodes on changed media or resized disk sr0
[10858.361985] VFS: busy inodes on changed media or resized disk sr0
[10858.489884] VFS: busy inodes on changed media or resized disk sr0
[10858.702381] VFS: busy inodes on changed media or resized disk sr0
[10859.106661] VFS: busy inodes on changed media or resized disk sr0
[10859.234642] VFS: busy inodes on changed media or resized disk sr0
[10859.266183] VFS: busy inodes on changed media or resized disk sr0
[10859.270137] VFS: busy inodes on changed media or resized disk sr0
[10859.295578] VFS: busy inodes on changed media or resized disk sr0
[10859.302429] VFS: busy inodes on changed media or resized disk sr0
[10917.803228] UDF-fs: No VRS found
[10917.803236] UDF-fs: No partition found (1)
[10917.874373] ISO 9660 Extensions: Microsoft Joliet Level 3
[10917.876596] ISOFS: changing to secondary root
[10948.290311] ath5k phy0: noise floor calibration failed (2412MHz)
[10948.711926] ath5k phy0: noise floor calibration failed (2417MHz)
[10949.131821] ath5k phy0: noise floor calibration failed (2422MHz)
[10970.245274] VFS: busy inodes on changed media or resized disk sr0
[10970.362718] VFS: busy inodes on changed media or resized disk sr0
[10970.490627] VFS: busy inodes on changed media or resized disk sr0
[10970.703173] VFS: busy inodes on changed media or resized disk sr0
[10971.107790] VFS: busy inodes on changed media or resized disk sr0
[10971.235195] VFS: busy inodes on changed media or resized disk sr0
[10971.405316] VFS: busy inodes on changed media or resized disk sr0
[10971.554425] VFS: busy inodes on changed media or resized disk sr0
[10971.682026] VFS: busy inodes on changed media or resized disk sr0
[10971.937328] VFS: busy inodes on changed media or resized disk sr0
[11061.428146] UDF-fs: No VRS found
[11061.428154] UDF-fs: No partition found (1)
[11061.484653] ISO 9660 Extensions: Microsoft Joliet Level 3
[11061.485839] ISOFS: changing to secondary root
[11428.291700] ath5k phy0: noise floor calibration failed (2412MHz)
[11428.711784] ath5k phy0: noise floor calibration failed (2417MHz)
[11429.135821] ath5k phy0: noise floor calibration failed (2422MHz)
[11548.287680] ath5k phy0: noise floor calibration failed (2412MHz)
[11548.707916] ath5k phy0: noise floor calibration failed (2417MHz)
[11549.132259] ath5k phy0: noise floor calibration failed (2422MHz)
[11607.084586] ath5k phy0: unsupported jumbo
[11668.288655] ath5k phy0: noise floor calibration failed (2412MHz)
[11668.707891] ath5k phy0: noise floor calibration failed (2417MHz)
[11669.173014] ath5k phy0: noise floor calibration failed (2422MHz)
[11788.287649] ath5k phy0: noise floor calibration failed (2412MHz)
[11788.707848] ath5k phy0: noise floor calibration failed (2417MHz)
[11789.131866] ath5k phy0: noise floor calibration failed (2422MHz)
[11908.287705] ath5k phy0: noise floor calibration failed (2412MHz)
[11908.707661] ath5k phy0: noise floor calibration failed (2417MHz)
[11909.129034] ath5k phy0: noise floor calibration failed (2422MHz)
[12028.291767] ath5k phy0: noise floor calibration failed (2412MHz)
[12028.711914] ath5k phy0: noise floor calibration failed (2417MHz)
[12029.426915] ath5k phy0: noise floor calibration timeout (2422MHz)
[12148.287740] ath5k phy0: noise floor calibration failed (2412MHz)
[12148.707849] ath5k phy0: noise floor calibration failed (2417MHz)
[12149.131998] ath5k phy0: noise floor calibration failed (2422MHz)
[12268.287864] ath5k phy0: noise floor calibration failed (2412MHz)
[12268.711989] ath5k phy0: noise floor calibration failed (2417MHz)
[12269.135918] ath5k phy0: noise floor calibration failed (2422MHz)
[12388.287932] ath5k phy0: noise floor calibration failed (2412MHz)
[12388.707655] ath5k phy0: noise floor calibration failed (2417MHz)
[12389.131715] ath5k phy0: noise floor calibration failed (2422MHz)
[12508.288671] ath5k phy0: noise floor calibration failed (2412MHz)
[12508.719860] ath5k phy0: noise floor calibration failed (2417MHz)
[12509.155707] ath5k phy0: noise floor calibration failed (2422MHz)
[12628.291640] ath5k phy0: noise floor calibration failed (2412MHz)
[12628.711712] ath5k phy0: noise floor calibration failed (2417MHz)
[12629.139890] ath5k phy0: noise floor calibration failed (2422MHz)
[12748.291688] ath5k phy0: noise floor calibration failed (2412MHz)
[12748.715660] ath5k phy0: noise floor calibration failed (2417MHz)
[12749.139893] ath5k phy0: noise floor calibration failed (2422MHz)
[12868.287673] ath5k phy0: noise floor calibration failed (2412MHz)
[12868.707896] ath5k phy0: noise floor calibration failed (2417MHz)
[12869.131923] ath5k phy0: noise floor calibration failed (2422MHz)
[12877.199939] ath5k phy0: noise floor calibration timeout (2462MHz)
[12988.287891] ath5k phy0: noise floor calibration failed (2412MHz)
[12988.711923] ath5k phy0: noise floor calibration failed (2417MHz)
[12989.135997] ath5k phy0: noise floor calibration failed (2422MHz)
[13108.287922] ath5k phy0: noise floor calibration failed (2412MHz)
[13108.716654] ath5k phy0: noise floor calibration failed (2417MHz)
[13194.893543] ath5k phy0: unsupported jumbo
[13228.287749] ath5k phy0: noise floor calibration failed (2412MHz)
[13228.719816] ath5k phy0: noise floor calibration failed (2417MHz)
[13229.414947] ath5k phy0: noise floor calibration failed (2422MHz)
[13348.292655] ath5k phy0: noise floor calibration failed (2412MHz)
[13348.719857] ath5k phy0: noise floor calibration failed (2417MHz)
[13349.143690] ath5k phy0: noise floor calibration failed (2422MHz)
[13389.204997] ath5k phy0: unsupported jumbo
[13468.287769] ath5k phy0: noise floor calibration failed (2412MHz)
[13468.707915] ath5k phy0: noise floor calibration failed (2417MHz)
[13469.132759] ath5k phy0: noise floor calibration failed (2422MHz)
[13588.288803] ath5k phy0: noise floor calibration failed (2412MHz)
[13588.751701] ath5k phy0: noise floor calibration failed (2417MHz)
[13589.172023] ath5k phy0: noise floor calibration failed (2422MHz)
[13708.288623] ath5k phy0: noise floor calibration failed (2412MHz)
[13708.723996] ath5k phy0: noise floor calibration failed (2417MHz)
[13709.171846] ath5k phy0: noise floor calibration failed (2422MHz)
[13828.288613] ath5k phy0: noise floor calibration failed (2412MHz)
[13828.720666] ath5k phy0: noise floor calibration failed (2417MHz)
[13829.148723] ath5k phy0: noise floor calibration failed (2422MHz)
[14548.693098] ath5k phy0: noise floor calibration failed (2417MHz)
[14668.696748] ath5k phy0: noise floor calibration failed (2417MHz)
[14788.696654] ath5k phy0: noise floor calibration failed (2417MHz)
[14789.416281] ath5k phy0: noise floor calibration timeout (2422MHz)
[14908.696860] ath5k phy0: noise floor calibration failed (2417MHz)
[14909.417384] ath5k phy0: noise floor calibration timeout (2422MHz)
[15028.692640] ath5k phy0: noise floor calibration failed (2417MHz)
[15148.696684] ath5k phy0: noise floor calibration failed (2417MHz)
[15268.732655] ath5k phy0: noise floor calibration failed (2417MHz)
[15628.288898] ath5k phy0: noise floor calibration failed (2412MHz)
[15628.712676] ath5k phy0: noise floor calibration failed (2417MHz)
[15748.288691] ath5k phy0: noise floor calibration failed (2412MHz)
[15748.716913] ath5k phy0: noise floor calibration failed (2417MHz)
[15868.699724] ath5k phy0: noise floor calibration failed (2417MHz)
[15988.288787] ath5k phy0: noise floor calibration failed (2412MHz)
[15988.716712] ath5k phy0: noise floor calibration failed (2417MHz)
[16108.696887] ath5k phy0: noise floor calibration failed (2417MHz)
[16886.056232] ath5k phy0: unsupported jumbo
[24495.828297] ath5k phy0: noise floor calibration timeout (2462MHz)
[26211.672655] wlan0: deauthenticating from 00:24:01:cf:d1:7b by local choice (reason=3)
[26215.200230] PM: Syncing filesystems ... done.
[26215.384024] PM: Preparing system for mem sleep
[26215.384030] Freezing user space processes ... (elapsed 0.00 seconds) done.
[26215.385189] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[26215.385261] PM: Entering mem sleep
[26215.385277] Suspending console(s) (use no_console_suspend to debug)
[26215.444117] sd 3:0:0:0: [sda] Synchronizing SCSI cache
[26215.444316] sd 3:0:0:0: [sda] Stopping disk
[26215.829000] PM: suspend of drv:sd dev:3:0:0:0 complete after 384.886 msecs
[26216.225197] PM: suspend of drv:psmouse dev:serio2 complete after 396.145 msecs
[26216.328029] PM: suspend of drv:atkbd dev:serio0 complete after 102.806 msecs
[26216.337300] ath5k 0000:07:00.0: PCI INT A disabled
[26216.353205] forcedeth 0000:00:0a.0: PCI INT A disabled
[26216.720050] HDA Intel 0000:00:07.0: PCI INT A disabled
[26216.736034] PM: suspend of drv:HDA Intel dev:0000:00:07.0 complete after 320.009 msecs
[26216.736104] ata2: port disabled. ignoring.
[26216.752029] ehci_hcd 0000:00:04.1: PCI INT B disabled
[26216.752038] ohci_hcd 0000:00:04.0: PCI INT A disabled
[26216.752047] ehci_hcd 0000:00:02.1: PCI INT B disabled
[26216.752055] ohci_hcd 0000:00:02.0: PCI INT A disabled
[26216.752297] PM: suspend of devices complete after 1366.736 msecs
[26216.752300] PM: suspend devices took 1.368 seconds
[26216.816315] PM: late suspend of devices complete after 64.009 msecs
[26216.836065] ACPI: Preparing to enter system sleep state S3
[26216.908351] Disabling non-boot CPUs ...
[26216.908376] CPU0 attaching NULL sched-domain.
[26216.908380] CPU1 attaching NULL sched-domain.
[26216.972562] CPU0 attaching NULL sched-domain.
[26216.973736] Breaking affinity for irq 12
[26216.973758] Breaking affinity for irq 16
[26216.973775] Breaking affinity for irq 20
[26217.076038] CPU 1 is now offline
[26217.076041] SMP alternatives: switching to UP code
[26217.081552] Extended CMOS year: 2000
[26217.081552] Back to C!
[26217.081552] Extended CMOS year: 2000
[26217.084125] Enabling non-boot CPUs ...
[26217.084385] SMP alternatives: switching to SMP code
[26217.089067] Booting processor 1 APIC 0x1 ip 0x6000
[26217.080999] Initializing CPU#1
[26217.080999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[26217.080999] CPU: L2 Cache: 512K (64 bytes/line)
[26217.080999] CPU: Physical Processor ID: 0
[26217.080999] CPU: Processor Core ID: 1
[26217.180082] CPU1: AMD Athlon Dual-Core QL-60 stepping 01
[26217.180195] CPU0 attaching NULL sched-domain.
[26217.208022] CPU0 attaching sched-domain:
[26217.208025]  domain 0: span 0-1 level MC
[26217.208029]   groups: 0 1
[26217.208033] CPU1 attaching sched-domain:
[26217.208035]  domain 0: span 0-1 level MC
[26217.208038]   groups: 1 0
[26217.208641] CPU1 is up
[26217.208819] ACPI: Waking up from system sleep state S3
[26217.320692] ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
[26217.320731] ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
[26217.320768] ohci_hcd 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00007, writing 0xb00003)
[26217.320802] ehci_hcd 0000:00:04.1: restoring config space at offset 0x1 (was 0xb00006, writing 0xb00002)
[26217.320839] pata_amd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00005, writing 0xb80005)
[26217.320863] HDA Intel 0000:00:07.0: restoring config space at offset 0xf (was 0x5020100, writing 0x502010a)
[26217.320876] HDA Intel 0000:00:07.0: restoring config space at offset 0x4 (was 0x0, writing 0xc0000000)
[26217.320883] HDA Intel 0000:00:07.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00002)
[26217.321024] HDA Intel 0000:00:07.0: Enabling HT MSI Mapping
[26217.321177] pci 0000:00:08.0: Enabling HT MSI Mapping
[26217.321203] ahci 0000:00:09.0: restoring config space at offset 0x1 (was 0xb00007, writing 0x20b00407)
[26217.321357] ahci 0000:00:09.0: Enabling HT MSI Mapping
[26217.321532] forcedeth 0000:00:0a.0: Enabling HT MSI Mapping
[26217.321704] pci 0000:00:0b.0: Enabling HT MSI Mapping
[26217.321792] pcieport 0000:00:14.0: restoring config space at offset 0x7 (was 0x1f1, writing 0x200001f1)
[26217.321817] pcieport 0000:00:14.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[26217.322033] nvidia 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[26217.322041] nvidia 0000:02:00.0: restoring config space at offset 0x9 (was 0x1, writing 0x4001)
[26217.322046] nvidia 0000:02:00.0: restoring config space at offset 0x7 (was 0xc, writing 0xc400000c)
[26217.322051] nvidia 0000:02:00.0: restoring config space at offset 0x5 (was 0xc, writing 0xd000000c)
[26217.322104] ath5k 0000:07:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[26217.322111] ath5k 0000:07:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x20100107)
[26217.322489] PM: early resume of devices complete after 2.182 msecs
[26217.442419] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 17 (level, low) -> IRQ 17
[26217.442426] ohci_hcd 0000:00:02.0: setting latency timer to 64
[26217.464572] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 17 (level, low) -> IRQ 17
[26217.464577] ehci_hcd 0000:00:02.1: setting latency timer to 64
[26217.464582] usb usb1: root hub lost power or was reset
[26217.464592] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[26217.464603] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z010] -> GSI 16 (level, low) -> IRQ 16
[26217.464608] ohci_hcd 0000:00:04.0: setting latency timer to 64
[26217.488568] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z011] -> GSI 16 (level, low) -> IRQ 16
[26217.488574] ehci_hcd 0000:00:04.1: setting latency timer to 64
[26217.488578] usb usb2: root hub lost power or was reset
[26217.488586] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[26217.488598] pata_amd 0000:00:06.0: setting latency timer to 64
[26217.488737] ata2: port disabled. ignoring.
[26217.488751] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 19 (level, low) -> IRQ 19
[26217.488756] HDA Intel 0000:00:07.0: setting latency timer to 64
[26217.488794] pci 0000:00:08.0: setting latency timer to 64
[26217.488805] ahci 0000:00:09.0: setting latency timer to 64
[26217.972564] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[26218.009105] PM: resume of drv:forcedeth dev:0000:00:0a.0 complete after 520.253 msecs
[26218.009112] pci 0000:00:0b.0: setting latency timer to 64
[26218.257903] ata3.00: configured for UDMA/100
[26219.093028] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[26219.095781] ata4.00: configured for UDMA/100
[26226.734115] PM: resume of drv:nvidia dev:0000:02:00.0 complete after 8724.968 msecs
[26226.734140] ath5k 0000:07:00.0: PCI INT A -> Link[Z012] -> GSI 23 (level, low) -> IRQ 23
[26226.864551] PM: resume of drv:usb dev:usb1 complete after 129.917 msecs
[26227.116187] PM: resume of drv:usb dev:usb2 complete after 251.619 msecs
[26227.300563] PM: resume of drv:usb dev:usb4 complete after 184.345 msecs
[26227.319084] sd 3:0:0:0: [sda] Starting disk
[26227.696376] usb 4-4: reset low speed USB device using ohci_hcd and address 2
[26228.062448] PM: resume of drv:usb dev:4-4 complete after 689.355 msecs
[26228.062480] PM: resume of devices complete after 10739.941 msecs
[26228.062702] PM: resume devices took 10.740 seconds
[26228.062704] ------------[ cut here ]------------
[26228.062713] WARNING: at /build/buildd/linux-2.6.32/kernel/power/suspend_test.c:53 suspend_test_finish+0x89/0x90()
[26228.062716] Hardware name: Compaq Presario CQ50 Notebook PC
[26228.062718] Component: resume devices, time: 10740
[26228.062720] Modules linked in: usbhid hid isofs udf crc_itu_t binfmt_misc ppdev snd_hda_codec_nvhdmi snd_hda_codec_conexant snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm fbcon arc4 joydev tileblit nvidia(P) snd_seq_dummy snd_seq_oss font snd_seq_midi ath5k bitblit snd_rawmidi snd_seq_midi_event softcursor snd_seq mac80211 snd_timer snd_seq_device agpgart ath vga16fb psmouse vgastate snd cfg80211 soundcore shpchp led_class i2c_nforce2 serio_raw video lp output snd_page_alloc parport ahci forcedeth pata_amd
[26228.062762] Pid: 6656, comm: pm-suspend Tainted: P           2.6.32-19-generic #28-Ubuntu
[26228.062764] Call Trace:
[26228.062772]  [<c014c342>] warn_slowpath_common+0x72/0xa0
[26228.062776]  [<c0183929>] ? suspend_test_finish+0x89/0x90
[26228.062780]  [<c0183929>] ? suspend_test_finish+0x89/0x90
[26228.062784]  [<c014c3bb>] warn_slowpath_fmt+0x2b/0x30
[26228.062788]  [<c0183929>] suspend_test_finish+0x89/0x90
[26228.062792]  [<c0183701>] suspend_devices_and_enter+0xa1/0xd0
[26228.062798]  [<c0588673>] ? printk+0x1d/0x22
[26228.062802]  [<c01837ed>] enter_state+0xbd/0xf0
[26228.062806]  [<c0182ea5>] state_store+0x75/0xc0
[26228.062810]  [<c0182e30>] ? state_store+0x0/0xc0
[26228.062815]  [<c034b180>] kobj_attr_store+0x20/0x30
[26228.062820]  [<c025da15>] sysfs_write_file+0x95/0x100
[26228.062825]  [<c0207932>] vfs_write+0xa2/0x1a0
[26228.062829]  [<c025d980>] ? sysfs_write_file+0x0/0x100
[26228.062833]  [<c058d210>] ? do_page_fault+0x160/0x3a0
[26228.062837]  [<c0208252>] sys_write+0x42/0x70
[26228.062841]  [<c01033ec>] syscall_call+0x7/0xb
[26228.062844] ---[ end trace 7839531b89b16c18 ]---
[26228.062879] PM: Finishing wakeup.
[26228.062881] Restarting tasks ... done.
[26228.182446] VFS: busy inodes on changed media or resized disk sr0
[26228.309839] VFS: busy inodes on changed media or resized disk sr0
[26228.437459] VFS: busy inodes on changed media or resized disk sr0
[26228.570250] forcedeth 0000:00:0a.0: irq 26 for MSI/MSI-X
[26228.570452] eth0: no link during initialization.
[26228.570966] ADDRCONF(NETDEV_UP): eth0: link is not ready
[26228.642126] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[26229.207349] VFS: busy inodes on changed media or resized disk sr0
[26229.271136] ata3: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x10
[26229.271142] ata3: irq_stat 0x40000001
[26229.271146] sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[26229.271159] ata3.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[26229.271161]          res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[26229.271164] ata3.00: status: { DRDY ERR }
[26229.313685] VFS: busy inodes on changed media or resized disk sr0
[26229.483943] VFS: busy inodes on changed media or resized disk sr0
[26229.762490] VFS: busy inodes on changed media or resized disk sr0
[26229.943302] VFS: busy inodes on changed media or resized disk sr0
[26230.120542] wlan0: deauthenticating from 00:24:01:cf:d1:7b by local choice (reason=3)
[26230.353910] wlan0: direct probe to AP 00:24:01:cf:d1:7b (try 1)
[26230.356503] wlan0: direct probe responded
[26230.356510] wlan0: authenticate with AP 00:24:01:cf:d1:7b (try 1)
[26230.357954] wlan0: authenticated
[26230.357986] wlan0: associate with AP 00:24:01:cf:d1:7b (try 1)
[26230.361101] wlan0: RX AssocResp from 00:24:01:cf:d1:7b (capab=0x431 status=0 aid=1)
[26230.361107] wlan0: associated
[26230.362441] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[26232.861595] UDF-fs: No VRS found
[26232.861602] UDF-fs: No partition found (1)
[26232.922496] ISO 9660 Extensions: Microsoft Joliet Level 3
[26232.923986] ISOFS: changing to secondary root
[26240.924564] wlan0: no IPv6 routers present
[26346.488408] No probe response from AP 00:24:01:cf:d1:7b after 500ms, disconnecting.
[26359.733846] wlan0: direct probe to AP 00:24:01:cf:d1:7b (try 1)
[26359.932440] wlan0: direct probe to AP 00:24:01:cf:d1:7b (try 2)
[26360.132034] wlan0: direct probe to AP 00:24:01:cf:d1:7b (try 3)
[26360.332194] wlan0: direct probe to AP 00:24:01:cf:d1:7b timed out
[26363.426960] wlan0: direct probe to AP 00:24:01:cf:d1:7b (try 1)
[26363.624037] wlan0: direct probe to AP 00:24:01:cf:d1:7b (try 2)
[26363.824042] wlan0: direct probe to AP 00:24:01:cf:d1:7b (try 3)
[26364.024034] wlan0: direct probe to AP 00:24:01:cf:d1:7b timed out
[26374.460209] wlan0: direct probe to AP 00:24:01:cf:d1:7b (try 1)
[26374.462576] wlan0: direct probe responded
[26374.462580] wlan0: authenticate with AP 00:24:01:cf:d1:7b (try 1)
[26374.464562] wlan0: authenticated
[26374.464599] wlan0: associate with AP 00:24:01:cf:d1:7b (try 1)
[26374.467001] wlan0: RX AssocResp from 00:24:01:cf:d1:7b (capab=0x431 status=0 aid=1)
[26374.467007] wlan0: associated