[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-21-generic (root@emerald) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #58 SMP Fri Mar 26 14:33:26 UTC 2010 (Ubuntu 2.6.31-21.58~alps4-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000de532000 (usable) [ 0.000000] BIOS-e820: 00000000de532000 - 00000000de732000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000de732000 - 00000000dfd6f000 (usable) [ 0.000000] BIOS-e820: 00000000dfd6f000 - 00000000dfdbf000 (reserved) [ 0.000000] BIOS-e820: 00000000dfdbf000 - 00000000dfe93000 (usable) [ 0.000000] BIOS-e820: 00000000dfe93000 - 00000000dfebf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000dfebf000 - 00000000dfee2000 (usable) [ 0.000000] BIOS-e820: 00000000dfee2000 - 00000000dfef7000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dfef7000 - 00000000dff00000 (usable) [ 0.000000] BIOS-e820: 00000000f7000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb01000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000110000000 (usable) [ 0.000000] DMI 2.6 present. [ 0.000000] last_pfn = 0xdff00 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back [ 0.000000] 3 base 00DFEBE000 mask FFFFFFF000 uncachable [ 0.000000] 4 base 00FFE00000 mask FFFFE00000 write-protect [ 0.000000] 5 base 0100000000 mask FFF0000000 write-back [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000120000000 aka 4608M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000de532000 (usable) [ 0.000000] modified: 00000000de532000 - 00000000de732000 (ACPI NVS) [ 0.000000] modified: 00000000de732000 - 00000000dfd6f000 (usable) [ 0.000000] modified: 00000000dfd6f000 - 00000000dfdbf000 (reserved) [ 0.000000] modified: 00000000dfdbf000 - 00000000dfe93000 (usable) [ 0.000000] modified: 00000000dfe93000 - 00000000dfebf000 (ACPI NVS) [ 0.000000] modified: 00000000dfebf000 - 00000000dfee2000 (usable) [ 0.000000] modified: 00000000dfee2000 - 00000000dfef7000 (ACPI data) [ 0.000000] modified: 00000000dfef7000 - 00000000dff00000 (usable) [ 0.000000] modified: 00000000f7000000 - 00000000f8000000 (reserved) [ 0.000000] modified: 00000000feb00000 - 00000000feb01000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000110000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 378a5000 - 37fefc02 [ 0.000000] Allocated new RAMDISK: 008b5000 - 00fffc02 [ 0.000000] Move RAMDISK from 00000000378a5000 - 0000000037fefc01 to 008b5000 - 00fffc01 [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP ) [ 0.000000] ACPI: XSDT dfef6120 0005C (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP dfef5000 000F4 (v04 HP SLIC-MPC 00000003 MSFT 01000013) [ 0.000000] ACPI: DSDT dfee6000 0BB8A (v01 HP SLIC-MPC F0000000 MSFT 01000013) [ 0.000000] ACPI: FACS dfe9c000 00040 [ 0.000000] ACPI: HPET dfef4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC dfef3000 00068 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG dfef2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: BOOT dfee5000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC dfee4000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT dfee2000 00182 (v01 AMD PowerNow 00000001 AMD 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2695MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008b0160] TEXT DATA BSS ==> [0000100000 - 00008b0160] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008b1000 - 00008b42b2] BRK ==> [00008b1000 - 00008b42b2] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008b5000 - 0000fffc02] NEW RAMDISK ==> [00008b5000 - 0000fffc02] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000dff00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000de532 [ 0.000000] 0: 0x000de732 -> 0x000dfd6f [ 0.000000] 0: 0x000dfdbf -> 0x000dfe93 [ 0.000000] 0: 0x000dfebf -> 0x000dfee2 [ 0.000000] 0: 0x000dfef7 -> 0x000dff00 [ 0.000000] On node 0 totalpages: 916490 [ 0.000000] free_area_init_node: node 0, pgdat c078ad60, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 5391 pages used for memmap [ 0.000000] HighMem zone: 683874 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:17100000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c2c10000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 909323 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-21-generic root=UUID=f1e2e19e-a0f8-407d-9533-c5ba95a8be50 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 18344960 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000dff00) [ 0.000000] Memory: 3602164k/3668992k available (4584k kernel code, 62944k reserved, 2149k data, 544k init, 2757060k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0794000 - 0xc081c000 ( 544 kB) [ 0.000000] .data : 0xc057a0f8 - 0xc0793888 (2149 kB) [ 0.000000] .text : 0xc0100000 - 0xc057a0f8 (4584 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1596.082 MHz processor. [ 0.000011] spurious 8259A interrupt: IRQ7. [ 0.001044] Console: colour VGA+ 80x25 [ 0.001048] console [tty0] enabled [ 0.001331] hpet clockevent registered [ 0.001338] alloc irq_desc for 24 on node 0 [ 0.001348] alloc kstat_irqs on node 0 [ 0.001355] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.001362] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.16 BogoMIPS (lpj=6384328) [ 0.001385] Security Framework initialized [ 0.001399] AppArmor: AppArmor initialized [ 0.001407] Mount-cache hash table entries: 512 [ 0.001543] Initializing cgroup subsys ns [ 0.001548] Initializing cgroup subsys cpuacct [ 0.001553] Initializing cgroup subsys memory [ 0.001561] Initializing cgroup subsys devices [ 0.001564] Initializing cgroup subsys freezer [ 0.001567] Initializing cgroup subsys net_cls [ 0.001582] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.001585] CPU: L2 Cache: 256K (64 bytes/line) [ 0.001588] CPU: Physical Processor ID: 0 [ 0.001591] CPU: Processor Core ID: 0 [ 0.001595] mce: CPU supports 5 MCE banks [ 0.001605] using C1E aware idle routine [ 0.001613] Performance Counters: AMD PMU driver. [ 0.001621] ... version: 0 [ 0.001623] ... bit width: 48 [ 0.001625] ... generic counters: 4 [ 0.001628] ... value mask: 0000ffffffffffff [ 0.001631] ... max period: 00007fffffffffff [ 0.001633] ... fixed-purpose counters: 0 [ 0.001636] ... counter mask: 000000000000000f [ 0.001640] Checking 'hlt' instruction... OK. [ 0.018483] ACPI: Core revision 20090521 [ 0.036477] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.076894] CPU0: AMD Athlon(tm) Neo X2 Dual Core Processor L335 stepping 02 [ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3191.93 BogoMIPS (lpj=6383871) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 256K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 5 MCE banks [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.164498] CPU1: AMD Athlon(tm) Neo X2 Dual Core Processor L335 stepping 02 [ 0.164564] Brought up 2 CPUs [ 0.164567] Total of 2 processors activated (6384.09 BogoMIPS). [ 0.164562] System has AMD C1E enabled [ 0.164612] CPU0 attaching sched-domain: [ 0.164562] Switch to broadcast mode on CPU1 [ 0.164620] domain 0: span 0-1 level MC [ 0.164625] groups: 0 1 [ 0.164633] CPU1 attaching sched-domain: [ 0.164636] domain 0: span 0-1 level MC [ 0.164639] groups: 1 0 [ 0.164726] Switch to broadcast mode on CPU0 [ 0.164726] Booting paravirtualized kernel on bare hardware [ 0.164726] regulator: core version 0.5 [ 0.164726] Time: 14:29:39 Date: 03/26/10 [ 0.164726] NET: Registered protocol family 16 [ 0.164726] EISA bus registered [ 0.164726] ACPI: bus type pci registered [ 0.164726] PCI: MCFG configuration 0: base f7000000 segment 0 buses 0 - 15 [ 0.164726] PCI: MCFG area at f7000000 reserved in E820 [ 0.164726] PCI: Using MMCONFIG for extended config space [ 0.164726] PCI: Using configuration type 1 for base access [ 0.164726] mtrr: your CPUs had inconsistent fixed MTRR settings [ 0.164726] mtrr: probably your BIOS does not setup all CPUs. [ 0.164726] mtrr: corrected configuration. [ 0.165607] bio: create slab at 0 [ 0.165607] ACPI: EC: Enabling special treatment for EC from MSI. [ 0.165607] ACPI: EC: Look up EC in DSDT [ 0.173693] ACPI: BIOS _OSI(Linux) query ignored [ 0.176021] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.184411] ACPI: Interpreter enabled [ 0.184411] ACPI: (supports S0 S1 S3 S4 S5) [ 0.184411] ACPI: Using IOAPIC for interrupt routing [ 0.185101] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.185475] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.204488] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62 [ 0.204492] ACPI: EC: driver started in interrupt mode [ 0.204860] ACPI: No dock devices found. [ 0.206120] _OSC request failed [ 0.206124] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.206307] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.206312] pci 0000:00:04.0: PME# disabled [ 0.206361] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.206365] pci 0000:00:05.0: PME# disabled [ 0.206469] pci 0000:00:11.0: reg 10 io port: [0x7038-0x703f] [ 0.206478] pci 0000:00:11.0: reg 14 io port: [0x704c-0x704f] [ 0.206487] pci 0000:00:11.0: reg 18 io port: [0x7030-0x7037] [ 0.206496] pci 0000:00:11.0: reg 1c io port: [0x7048-0x704b] [ 0.206505] pci 0000:00:11.0: reg 20 io port: [0x7010-0x701f] [ 0.206515] pci 0000:00:11.0: reg 24 32bit mmio: [0xf2307000-0xf23073ff] [ 0.206582] pci 0000:00:12.0: reg 10 32bit mmio: [0xf2306000-0xf2306fff] [ 0.206648] pci 0000:00:12.1: reg 10 32bit mmio: [0xf2305000-0xf2305fff] [ 0.206664] pci 0000:00:12.2: reg 10 32bit mmio: [0xf2307500-0xf23075ff] [ 0.206664] pci 0000:00:12.2: supports D1 D2 [ 0.206664] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.206664] pci 0000:00:12.2: PME# disabled [ 0.206664] pci 0000:00:13.0: reg 10 32bit mmio: [0xf2304000-0xf2304fff] [ 0.206664] pci 0000:00:13.2: reg 10 32bit mmio: [0xf2307400-0xf23074ff] [ 0.206664] pci 0000:00:13.2: supports D1 D2 [ 0.206664] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.206664] pci 0000:00:13.2: PME# disabled [ 0.206664] pci 0000:00:14.2: reg 10 64bit mmio: [0xf2300000-0xf2303fff] [ 0.206664] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.206664] pci 0000:00:14.2: PME# disabled [ 0.206664] pci 0000:01:05.0: reg 10 32bit mmio: [0xe0000000-0xefffffff] [ 0.206664] pci 0000:01:05.0: reg 14 io port: [0x6000-0x60ff] [ 0.206664] pci 0000:01:05.0: reg 18 32bit mmio: [0xf2200000-0xf220ffff] [ 0.206664] pci 0000:01:05.0: reg 24 32bit mmio: [0xf2100000-0xf21fffff] [ 0.206664] pci 0000:01:05.0: supports D1 D2 [ 0.206664] pci 0000:01:05.1: reg 10 32bit mmio: [0xf2210000-0xf2213fff] [ 0.206664] pci 0000:01:05.1: supports D1 D2 [ 0.206664] pci 0000:00:01.0: bridge io port: [0x6000-0x6fff] [ 0.206664] pci 0000:00:01.0: bridge 32bit mmio: [0xf2100000-0xf22fffff] [ 0.206664] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff] [ 0.206664] pci 0000:02:00.0: reg 10 io port: [0x2000-0x20ff] [ 0.206664] pci 0000:02:00.0: reg 18 64bit mmio: [0xf0010000-0xf0010fff] [ 0.206664] pci 0000:02:00.0: reg 20 64bit mmio: [0xf0000000-0xf000ffff] [ 0.206664] pci 0000:02:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] [ 0.206664] pci 0000:02:00.0: supports D1 D2 [ 0.206664] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.206664] pci 0000:02:00.0: PME# disabled [ 0.206664] pci 0000:00:04.0: bridge io port: [0x2000-0x5fff] [ 0.206664] pci 0000:00:04.0: bridge 32bit mmio: [0xf1100000-0xf20fffff] [ 0.206664] pci 0000:00:04.0: bridge 64bit mmio pref: [0xf0000000-0xf0ffffff] [ 0.206664] pci 0000:08:00.0: reg 10 64bit mmio: [0xf1000000-0xf100ffff] [ 0.206664] pci 0000:08:00.0: supports D1 [ 0.206664] pci 0000:08:00.0: PME# supported from D0 D1 D3hot [ 0.206664] pci 0000:08:00.0: PME# disabled [ 0.206664] pci 0000:00:05.0: bridge 32bit mmio: [0xf1000000-0xf10fffff] [ 0.206664] pci 0000:00:14.4: transparent bridge [ 0.206664] pci 0000:00:14.4: bridge io port: [0x1000-0x1fff] [ 0.206664] pci_bus 0000:00: on NUMA node 0 [ 0.206664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.206664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.206664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] [ 0.206664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 0.206664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.206664] _OSC request failed [ 0.223803] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.224052] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.224285] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.224486] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.224721] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.224954] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.225187] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.225388] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.225662] SCSI subsystem initialized [ 0.228034] libata version 3.00 loaded. [ 0.228065] usbcore: registered new interface driver usbfs [ 0.228065] usbcore: registered new interface driver hub [ 0.228065] usbcore: registered new device driver usb [ 0.228115] ACPI: WMI: Mapper loaded [ 0.228117] PCI: Using ACPI for IRQ routing [ 0.240011] Bluetooth: Core ver 2.15 [ 0.244018] NET: Registered protocol family 31 [ 0.244020] Bluetooth: HCI device and connection manager initialized [ 0.244024] Bluetooth: HCI socket layer initialized [ 0.244027] NetLabel: Initializing [ 0.244029] NetLabel: domain hash size = 128 [ 0.244031] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.244048] NetLabel: unlabeled traffic allowed by default [ 0.244124] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.244132] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.248029] hpet: hpet2 irq 24 for MSI [ 0.252033] Switched to high resolution mode on CPU 0 [ 0.252037] Switched to high resolution mode on CPU 1 [ 0.269066] pnp: PnP ACPI init [ 0.269089] ACPI: bus type pnp registered [ 0.272773] alloc irq_desc for 23 on node -1 [ 0.272776] alloc kstat_irqs on node -1 [ 0.276361] pnp: PnP ACPI: found 11 devices [ 0.276364] ACPI: ACPI bus type pnp unregistered [ 0.276368] PnPBIOS: Disabled by ACPI PNP [ 0.276384] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.276389] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.276393] system 00:01: iomem range 0xf7000000-0xf7ffffff has been reserved [ 0.276404] system 00:08: ioport range 0x400-0x4cf has been reserved [ 0.276408] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.276412] system 00:08: ioport range 0x4d6-0x4d6 has been reserved [ 0.276416] system 00:08: ioport range 0x680-0x6ff has been reserved [ 0.276420] system 00:08: ioport range 0x77a-0x77a has been reserved [ 0.276424] system 00:08: ioport range 0xc00-0xc01 has been reserved [ 0.276428] system 00:08: ioport range 0xc14-0xc14 has been reserved [ 0.276433] system 00:08: ioport range 0xc50-0xc52 has been reserved [ 0.276437] system 00:08: ioport range 0xc6c-0xc6c has been reserved [ 0.276441] system 00:08: ioport range 0xc6f-0xc6f has been reserved [ 0.276445] system 00:08: ioport range 0xcd0-0xcdb has been reserved [ 0.276452] system 00:09: iomem range 0xe0000-0xfffff could not be reserved [ 0.276457] system 00:09: iomem range 0xffe00000-0xffffffff has been reserved [ 0.311398] AppArmor: AppArmor Filesystem Enabled [ 0.311421] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] [ 0.311454] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.311458] pci 0000:00:01.0: IO window: 0x6000-0x6fff [ 0.311464] pci 0000:00:01.0: MEM window: 0xf2100000-0xf22fffff [ 0.311469] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.311478] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.311482] pci 0000:00:04.0: IO window: 0x2000-0x5fff [ 0.311487] pci 0000:00:04.0: MEM window: 0xf1100000-0xf20fffff [ 0.311492] pci 0000:00:04.0: PREFETCH window: 0x000000f0000000-0x000000f0ffffff [ 0.311498] pci 0000:00:05.0: PCI bridge, secondary bus 0000:08 [ 0.311501] pci 0000:00:05.0: IO window: disabled [ 0.311506] pci 0000:00:05.0: MEM window: 0xf1000000-0xf10fffff [ 0.311510] pci 0000:00:05.0: PREFETCH window: disabled [ 0.311515] pci 0000:00:14.4: PCI bridge, secondary bus 0000:09 [ 0.311553] pci 0000:00:14.4: IO window: 0x1000-0x1fff [ 0.311559] pci 0000:00:14.4: MEM window: disabled [ 0.311565] pci 0000:00:14.4: PREFETCH window: disabled [ 0.311576] pci 0000:00:01.0: setting latency timer to 64 [ 0.311585] alloc irq_desc for 16 on node -1 [ 0.311588] alloc kstat_irqs on node -1 [ 0.311595] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.311601] pci 0000:00:04.0: setting latency timer to 64 [ 0.311607] alloc irq_desc for 17 on node -1 [ 0.311610] alloc kstat_irqs on node -1 [ 0.311615] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.311619] pci 0000:00:05.0: setting latency timer to 64 [ 0.311629] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.311633] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.311636] pci_bus 0000:01: resource 0 io: [0x6000-0x6fff] [ 0.311640] pci_bus 0000:01: resource 1 mem: [0xf2100000-0xf22fffff] [ 0.311644] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.311648] pci_bus 0000:02: resource 0 io: [0x2000-0x5fff] [ 0.311652] pci_bus 0000:02: resource 1 mem: [0xf1100000-0xf20fffff] [ 0.311655] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf0ffffff] [ 0.311660] pci_bus 0000:08: resource 1 mem: [0xf1000000-0xf10fffff] [ 0.311663] pci_bus 0000:09: resource 0 io: [0x1000-0x1fff] [ 0.311667] pci_bus 0000:09: resource 3 io: [0x00-0xffff] [ 0.311671] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffff] [ 0.311718] NET: Registered protocol family 2 [ 0.311833] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.312230] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.312956] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.313396] TCP: Hash tables configured (established 131072 bind 65536) [ 0.313400] TCP reno registered [ 0.313510] NET: Registered protocol family 1 [ 0.313585] Trying to unpack rootfs image as initramfs... [ 0.575956] Freeing initrd memory: 7467k freed [ 0.581248] Simple Boot Flag at 0x44 set to 0x1 [ 0.581465] cpufreq-nforce2: No nForce2 chipset. [ 0.581500] Scanning for low memory corruption every 60 seconds [ 0.581622] audit: initializing netlink socket (disabled) [ 0.581638] type=2000 audit(1269613779.581:1): initialized [ 0.593326] highmem bounce pool size: 64 pages [ 0.593332] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.595115] VFS: Disk quotas dquot_6.5.2 [ 0.595198] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.596108] fuse init (API version 7.12) [ 0.596227] msgmni has been set to 1666 [ 0.596623] alg: No test for stdrng (krng) [ 0.596640] io scheduler noop registered [ 0.596643] io scheduler anticipatory registered [ 0.596646] io scheduler deadline registered [ 0.596718] io scheduler cfq registered (default) [ 0.736095] pci 0000:01:05.0: Boot video device [ 0.736266] alloc irq_desc for 25 on node -1 [ 0.736270] alloc kstat_irqs on node -1 [ 0.736280] pcieport-driver 0000:00:04.0: irq 25 for MSI/MSI-X [ 0.736288] pcieport-driver 0000:00:04.0: setting latency timer to 64 [ 0.736410] alloc irq_desc for 26 on node -1 [ 0.736413] alloc kstat_irqs on node -1 [ 0.736420] pcieport-driver 0000:00:05.0: irq 26 for MSI/MSI-X [ 0.736427] pcieport-driver 0000:00:05.0: setting latency timer to 64 [ 0.736513] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.736663] _OSC request failed [ 0.736804] _OSC request failed [ 0.736830] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.741246] ACPI: AC Adapter [AC] (on-line) [ 0.741319] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.741324] ACPI: Power Button [PWRF] [ 0.741422] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.741426] ACPI: Power Button [PWRB] [ 0.741479] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.741520] ACPI: Sleep Button [SLPB] [ 0.741576] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 [ 0.744916] ACPI: Lid Switch [LID] [ 0.745472] ACPI: processor limited to max C-state 1 [ 0.745526] processor LNXCPU:00: registered as cooling_device0 [ 0.745533] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.745588] processor LNXCPU:01: registered as cooling_device1 [ 1.176117] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.176127] ACPI: Thermal Zone [TZ01] (64 C) [ 1.176200] isapnp: Scanning for PnP cards... [ 1.384176] ACPI: Battery Slot [BAT0] (battery present) [ 1.555471] isapnp: No Plug & Play device found [ 1.557120] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.558798] brd: module loaded [ 1.559433] loop: module loaded [ 1.559539] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 1.559639] ahci 0000:00:11.0: version 3.0 [ 1.559688] alloc irq_desc for 22 on node -1 [ 1.559692] alloc kstat_irqs on node -1 [ 1.559701] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.559747] alloc irq_desc for 27 on node -1 [ 1.559750] alloc kstat_irqs on node -1 [ 1.559762] ahci 0000:00:11.0: irq 27 for MSI/MSI-X [ 1.559828] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode [ 1.559833] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.560080] scsi0 : ahci [ 1.560258] ata1: SATA max UDMA/133 abar m1024@0xf2307000 port 0xf2307100 irq 27 [ 1.561495] Fixed MDIO Bus: probed [ 1.561540] PPP generic driver version 2.4.2 [ 1.561666] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.561726] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.561746] ehci_hcd 0000:00:12.2: setting latency timer to 64 [ 1.561751] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.561789] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.561873] ehci_hcd 0000:00:12.2: debug port 1 [ 1.561895] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf2307500 [ 1.572072] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.572179] usb usb1: configuration #1 chosen from 1 choice [ 1.572217] hub 1-0:1.0: USB hub found [ 1.572228] hub 1-0:1.0: 6 ports detected [ 1.572336] alloc irq_desc for 19 on node -1 [ 1.572339] alloc kstat_irqs on node -1 [ 1.572347] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.572359] ehci_hcd 0000:00:13.2: setting latency timer to 64 [ 1.572363] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.572401] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.572481] ehci_hcd 0000:00:13.2: debug port 1 [ 1.572497] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf2307400 [ 1.584064] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.584147] usb usb2: configuration #1 chosen from 1 choice [ 1.584181] hub 2-0:1.0: USB hub found [ 1.584190] hub 2-0:1.0: 6 ports detected [ 1.584303] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.584359] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.584373] ohci_hcd 0000:00:12.0: setting latency timer to 64 [ 1.584378] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.584425] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.584490] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf2306000 [ 1.644111] usb usb3: configuration #1 chosen from 1 choice [ 1.644146] hub 3-0:1.0: USB hub found [ 1.644192] hub 3-0:1.0: 3 ports detected [ 1.644249] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.644261] ohci_hcd 0000:00:12.1: setting latency timer to 64 [ 1.644265] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.644302] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.644365] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf2305000 [ 1.700120] usb usb4: configuration #1 chosen from 1 choice [ 1.700153] hub 4-0:1.0: USB hub found [ 1.700199] hub 4-0:1.0: 3 ports detected [ 1.700257] alloc irq_desc for 18 on node -1 [ 1.700260] alloc kstat_irqs on node -1 [ 1.700267] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.700281] ohci_hcd 0000:00:13.0: setting latency timer to 64 [ 1.700286] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.700324] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.700390] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf2304000 [ 1.756116] usb usb5: configuration #1 chosen from 1 choice [ 1.756148] hub 5-0:1.0: USB hub found [ 1.756194] hub 5-0:1.0: 3 ports detected [ 1.756256] uhci_hcd: USB Universal Host Controller Interface driver [ 1.756360] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.765711] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.765720] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.765819] mice: PS/2 mouse device common for all mice [ 1.766010] rtc_cmos 00:05: RTC can wake from S4 [ 1.766064] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.766131] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 1.766295] device-mapper: uevent: version 1.0.3 [ 1.766467] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.766655] device-mapper: multipath: version 1.1.0 loaded [ 1.766659] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.766850] EISA: Probing bus 0 at eisa.0 [ 1.766892] Cannot allocate resource for EISA slot 1 [ 1.766895] Cannot allocate resource for EISA slot 2 [ 1.766898] Cannot allocate resource for EISA slot 3 [ 1.766901] Cannot allocate resource for EISA slot 4 [ 1.766904] Cannot allocate resource for EISA slot 5 [ 1.766907] Cannot allocate resource for EISA slot 6 [ 1.766910] Cannot allocate resource for EISA slot 7 [ 1.766917] EISA: Detected 0 cards. [ 1.767100] cpuidle: using governor ladder [ 1.767103] cpuidle: using governor menu [ 1.767750] TCP cubic registered [ 1.768007] NET: Registered protocol family 10 [ 1.768563] lo: Disabled Privacy Extensions [ 1.768994] NET: Registered protocol family 17 [ 1.769075] Bluetooth: L2CAP ver 2.13 [ 1.769077] Bluetooth: L2CAP socket layer initialized [ 1.769081] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.769083] Bluetooth: SCO socket layer initialized [ 1.769130] Bluetooth: RFCOMM TTY layer initialized [ 1.769134] Bluetooth: RFCOMM socket layer initialized [ 1.769137] Bluetooth: RFCOMM ver 1.11 [ 1.769160] powernow-k8: Found 1 AMD Athlon(tm) Neo X2 Dual Core Processor L335 processors (2 cpu cores) (version 2.20.00) [ 1.769213] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x18 [ 1.769217] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e [ 1.769352] Using IPI No-Shortcut mode [ 1.769455] PM: Resume from disk failed. [ 1.769471] registered taskstats version 1 [ 1.769633] Magic number: 2:346:486 [ 1.769780] rtc_cmos 00:05: setting system clock to 2010-03-26 14:29:41 UTC (1269613781) [ 1.769785] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.769787] EDD information not available. [ 1.771940] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.996068] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 2.044047] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.045573] ata1.00: ATA-8: ST9320423AS, 0006HPM1, max UDMA/100 [ 2.045578] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.047543] ata1.00: configured for UDMA/100 [ 2.061203] scsi 0:0:0:0: Direct-Access ATA ST9320423AS 0006 PQ: 0 ANSI: 5 [ 2.061352] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.061404] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 2.061464] sd 0:0:0:0: [sda] Write Protect is off [ 2.061469] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.061500] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.061659] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 2.135176] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.135221] Freeing unused kernel memory: 544k freed [ 2.135691] Write protecting the kernel text: 4588k [ 2.135740] Write protecting the kernel read-only data: 1844k [ 2.152935] usb 1-6: configuration #1 chosen from 1 choice [ 2.349085] Linux agpgart interface v0.103 [ 2.437334] usb 4-2: new full speed USB device using ohci_hcd and address 2 [ 2.440585] [drm] Initialized drm 1.1.0 20060810 [ 2.445123] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.445167] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.445218] r8169 0000:02:00.0: setting latency timer to 64 [ 2.445263] alloc irq_desc for 28 on node -1 [ 2.445266] alloc kstat_irqs on node -1 [ 2.445285] r8169 0000:02:00.0: irq 28 for MSI/MSI-X [ 2.446096] eth0: RTL8102e at 0xf8138000, 00:21:cc:42:a0:1c, XID 24e00000 IRQ 28 [ 2.470022] [drm] radeon default to kernel modesetting DISABLED. [ 2.470879] pci 0000:01:05.0: power state changed by ACPI to D0 [ 2.470890] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.470896] pci 0000:01:05.0: setting latency timer to 64 [ 2.471044] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0 [ 2.474062] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 2.488480] acpi device:04: registered as cooling_device2 [ 2.488659] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6 [ 2.488704] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 2.610210] usb 4-2: configuration #1 chosen from 1 choice [ 3.508622] PM: Starting manual resume from disk [ 3.508629] PM: Resume from partition 8:6 [ 3.508632] PM: Checking hibernation image. [ 3.509008] PM: Resume from disk failed. [ 3.519185] EXT4-fs (sda5): barriers enabled [ 3.535101] kjournald2 starting: pid 385, dev sda5:8, commit interval 5 seconds [ 3.535188] EXT4-fs (sda5): delayed allocation enabled [ 3.535192] EXT4-fs: file extents enabled [ 3.558394] EXT4-fs: mballoc enabled [ 3.558420] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 4.147074] type=1505 audit(1269613783.875:2): operation="profile_load" pid=410 name=/usr/share/gdm/guest-session/Xsession [ 4.151038] type=1505 audit(1269613783.878:3): operation="profile_load" pid=411 name=/sbin/dhclient3 [ 4.151413] type=1505 audit(1269613783.878:4): operation="profile_load" pid=411 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.151621] type=1505 audit(1269613783.878:5): operation="profile_load" pid=411 name=/usr/lib/connman/scripts/dhclient-script [ 4.199685] type=1505 audit(1269613783.927:6): operation="profile_load" pid=412 name=/usr/bin/evince [ 4.205864] type=1505 audit(1269613783.934:7): operation="profile_load" pid=412 name=/usr/bin/evince-previewer [ 4.209570] type=1505 audit(1269613783.938:8): operation="profile_load" pid=412 name=/usr/bin/evince-thumbnailer [ 4.240291] type=1505 audit(1269613783.967:9): operation="profile_load" pid=414 name=/usr/lib/cups/backend/cups-pdf [ 12.092997] Adding 5654840k swap on /dev/sda6. Priority:-1 extents:1 across:5654840k [ 12.098972] udev: starting version 147 [ 12.277256] EXT4-fs (sda5): internal journal on sda5:8 [ 12.288716] lp: driver loaded but no devices found [ 12.375727] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0 [ 12.375734] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 12.375770] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 12.379514] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 12.379703] usbcore: registered new interface driver btusb [ 12.404965] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 12.446511] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SMBI [0xb00-0xb0f] [ 12.446517] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.502549] Linux video capture interface: v2.00 [ 12.512759] lis3lv02d: laptop model unknown, using default axes configuration [ 12.513612] lis3lv02d: 1-byte sensor found [ 12.518491] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7 [ 12.518595] Registered led device: hp::hddprotect [ 12.518614] lis3lv02d driver loaded. [ 12.519513] cfg80211: Calling CRDA to update world regulatory domain [ 12.549924] uvcvideo: Found UVC 1.00 device USB 2.0 PC Camera (058f:3831) [ 12.564444] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.572048] input: USB 2.0 PC Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-6/1-6:1.0/input/input8 [ 12.572115] usbcore: registered new interface driver uvcvideo [ 12.572119] USB Video Class driver (v0.1.0) [ 12.630786] cfg80211: World regulatory domain updated: [ 12.630792] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.630797] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.630801] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.630805] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.630809] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.630813] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.663461] alps.c: E6 report: 00 00 64 [ 12.694059] alps.c: E7 report: 73 02 64 [ 12.716684] ath9k 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 12.716699] ath9k 0000:08:00.0: setting latency timer to 64 [ 12.766351] ath: EEPROM regdomain: 0x69 [ 12.766356] ath: EEPROM indicates we should expect a direct regpair map [ 12.766362] ath: Country alpha2 being used: 00 [ 12.766366] ath: Regpair used: 0x69 [ 12.799084] alps.c: E6 report: 00 00 64 [ 12.829671] alps.c: E7 report: 73 02 64 [ 12.887138] r8169: eth0: link down [ 12.887436] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.902807] alps.c: Status: 10 00 0a [ 12.952576] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input9 [ 12.966017] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.966054] HDA Intel 0000:00:14.2: setting latency timer to 64 [ 12.977205] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10 [ 12.988328] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 12.989311] Registered led device: ath9k-phy0::radio [ 12.989335] Registered led device: ath9k-phy0::assoc [ 12.989357] Registered led device: ath9k-phy0::tx [ 12.989378] Registered led device: ath9k-phy0::rx [ 12.989392] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf89e0000, irq=17 [ 12.989610] __ratelimit: 6 callbacks suppressed [ 12.989616] type=1505 audit(1269628192.719:12): operation="profile_replace" pid=918 name=/usr/share/gdm/guest-session/Xsession [ 13.024576] type=1505 audit(1269628192.751:13): operation="profile_replace" pid=927 name=/sbin/dhclient3 [ 13.024954] type=1505 audit(1269628192.751:14): operation="profile_replace" pid=927 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 13.025170] type=1505 audit(1269628192.755:15): operation="profile_replace" pid=927 name=/usr/lib/connman/scripts/dhclient-script [ 13.041501] type=1505 audit(1269628192.771:16): operation="profile_replace" pid=928 name=/usr/bin/evince [ 13.047611] type=1505 audit(1269628192.775:17): operation="profile_replace" pid=928 name=/usr/bin/evince-previewer [ 13.051332] type=1505 audit(1269628192.779:18): operation="profile_replace" pid=928 name=/usr/bin/evince-thumbnailer [ 13.058801] type=1505 audit(1269628192.787:19): operation="profile_replace" pid=930 name=/usr/lib/cups/backend/cups-pdf [ 13.059265] type=1505 audit(1269628192.787:20): operation="profile_replace" pid=930 name=/usr/sbin/cupsd [ 13.062422] type=1505 audit(1269628192.791:21): operation="profile_replace" pid=931 name=/usr/sbin/tcpdump [ 13.065333] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 13.107669] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input11 [ 13.114953] input: HDA ATI SB Mic at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input12 [ 13.115062] input: HDA ATI SB HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:14.2/sound/card0/input13 [ 13.115910] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 13.115949] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 13.648387] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.648392] Bluetooth: BNEP filters: protocol multicast [ 13.778436] Bridge firewalling registered [ 13.869357] ppdev: user-space parallel port driver [ 15.770494] [drm] Setting GART location based on new memory map [ 15.787854] [drm] Loading RS780/RS880 CP Microcode [ 15.789013] [drm] Loading RS780/RS880 PFP Microcode [ 15.804076] [drm] Resetting GPU [ 15.804135] [drm] writeback test succeeded in 1 usecs [ 17.793025] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 75.500038] Clocksource tsc unstable (delta = -249958256 ns) [ 164.582739] wlan0: authenticate with AP 00:11:50:0f:b0:33 [ 164.585468] wlan0: authenticated [ 164.585480] wlan0: associate with AP 00:11:50:0f:b0:33 [ 164.587933] wlan0: RX AssocResp from 00:11:50:0f:b0:33 (capab=0x401 status=0 aid=4) [ 164.587944] wlan0: associated [ 164.588936] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 175.025029] wlan0: no IPv6 routers present