[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:05:01 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=241ff147-4b0f-443e-9b2c-fe3b4fa5706e ro quiet splash acpi_osi="Linux" [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable) [ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee1000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee1000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 1 base 000000000 mask F00000000 write-back [ 0.000000] 2 base 100000000 mask FC0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000ce000 - 00000000000d0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bfed0000 (usable) [ 0.000000] modified: 00000000bfed0000 - 00000000bfee1000 (ACPI NVS) [ 0.000000] modified: 00000000bfee1000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 00bfe00000 page 2M [ 0.000000] 00bfe00000 - 00bfed0000 page 4k [ 0.000000] kernel direct mapping tables up to bfed0000 @ 8000-d000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0100000000 - 0140000000 page 2M [ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000 [ 0.000000] RAMDISK: 377e1000 - 37fef073 [ 0.000000] ACPI: RSDP 00000000000f7ae0 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 00000000bfed3841 0007C (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 00000000bfeddc2a 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001) [ 0.000000] ACPI: DSDT 00000000bfed4db5 08E01 (v02 INTEL CRESTLNE 06040000 MSFT 03000001) [ 0.000000] ACPI: FACS 00000000bfee0fc0 00040 [ 0.000000] ACPI: APIC 00000000bfeddd1e 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: HPET 00000000bfeddd86 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 00000000bfedddbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A) [ 0.000000] ACPI: APIC 00000000bfedddfa 00068 (v01 PTLTD APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 00000000bfedde62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 00000000bfedde8a 00176 (v01 ACRSYS ACRPRDCT 06040000 acer 00000000) [ 0.000000] ACPI: SSDT 00000000bfed4ad8 002DD (v01 SataRe SataAhci 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfed3e79 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfed3dd3 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 00000000bfed38bd 00516 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000140000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000 [ 0.000000] NODE_DATA [000000000000c000 - 0000000000010fff] [ 0.000000] bootmap [0000000000011000 - 0000000000038fff] pages 28 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 00019e2ccc] TEXT DATA BSS ==> [0001000000 - 00019e2ccc] [ 0.000000] #3 [00377e1000 - 0037fef073] RAMDISK ==> [00377e1000 - 0037fef073] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [00019e3000 - 00019e3178] BRK ==> [00019e3000 - 00019e3178] [ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000] [ 0.000000] #7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000] [ 0.000000] found SMP MP-table at [ffff8800000f7b10] f7b10 [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00140000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfed0 [ 0.000000] 0: 0x00100000 -> 0x00140000 [ 0.000000] On node 0 totalpages: 1048170 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3835 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767752 pages, LIFO batch:31 [ 0.000000] Normal zone: 3584 pages used for memmap [ 0.000000] Normal zone: 258560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000 [ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bfed0000 - 00000000bfee1000 [ 0.000000] PM: Registered nosave memory: 00000000bfee1000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed14000 [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000 [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages at ffff880028022000, static data 90720 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030147 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=241ff147-4b0f-443e-9b2c-fe3b4fa5706e ro quiet splash acpi_osi="Linux" [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 4050516k/5242880k available (5313k kernel code, 1050200k absent, 142164k reserved, 3011k data, 660k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:4352 nr_irqs:424 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2400.081 MHz processor. [ 0.001991] Console: colour VGA+ 80x25 [ 0.001994] console [tty0] enabled [ 0.010000] allocated 41943040 bytes of page_cgroup [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.010000] hpet clockevent registered [ 0.010000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.16 BogoMIPS (lpj=24000810) [ 0.010000] Security Framework initialized [ 0.010000] AppArmor: AppArmor initialized [ 0.010000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010000] Mount-cache hash table entries: 256 [ 0.010000] Initializing cgroup subsys ns [ 0.010000] Initializing cgroup subsys cpuacct [ 0.010000] Initializing cgroup subsys memory [ 0.010000] Initializing cgroup subsys freezer [ 0.010000] Initializing cgroup subsys net_cls [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 3072K [ 0.010000] CPU 0/0x0 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] CPU0: Thermal monitoring handled by SMI [ 0.010000] using mwait in idle threads. [ 0.010000] Performance Counters: Core2 events, Intel PMU driver. [ 0.010000] ... version: 2 [ 0.010000] ... bit width: 40 [ 0.010000] ... generic counters: 2 [ 0.010000] ... value mask: 000000ffffffffff [ 0.010000] ... max period: 000000007fffffff [ 0.010000] ... fixed-purpose counters: 3 [ 0.010000] ... counter mask: 0000000700000003 [ 0.010000] ACPI: Core revision 20090521 [ 0.018343] Setting APIC routing to flat [ 0.018698] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.118719] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 0.120000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 4800.11 BogoMIPS (lpj=24000573) [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 3072K [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] CPU1: Thermal monitoring handled by SMI [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.271411] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 0.271420] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.280023] Brought up 2 CPUs [ 0.280026] Total of 2 processors activated (9600.27 BogoMIPS). [ 0.280079] CPU0 attaching sched-domain: [ 0.280082] domain 0: span 0-1 level MC [ 0.280084] groups: 0 1 [ 0.280088] CPU1 attaching sched-domain: [ 0.280090] domain 0: span 0-1 level MC [ 0.280092] groups: 1 0 [ 0.280161] Booting paravirtualized kernel on bare hardware [ 0.280161] regulator: core version 0.5 [ 0.280161] Time: 7:52:36 Date: 03/20/10 [ 0.280161] NET: Registered protocol family 16 [ 0.280191] ACPI: bus type pci registered [ 0.280253] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.280256] PCI: MCFG area at e0000000 reserved in E820 [ 0.290412] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.290414] PCI: Using configuration type 1 for base access [ 0.291113] bio: create slab at 0 [ 0.291113] ACPI: EC: Look up EC in DSDT [ 0.294026] ACPI: BIOS _OSI(Linux) query honored via cmdline [ 0.295102] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.830003] ACPI: EC: missing confirmations, switch off interrupt mode. [ 1.970063] ACPI: Interpreter enabled [ 1.970066] ACPI: (supports S0 S3 S4 S5) [ 1.970082] ACPI: Using IOAPIC for interrupt routing [ 1.973702] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 1.973705] ACPI: EC: driver started in poll mode [ 1.973984] ACPI: No dock devices found. [ 1.974485] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 1.974490] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013ba2abc0), AE_NOT_FOUND [ 1.974515] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.974614] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.974617] pci 0000:00:01.0: PME# disabled [ 1.974703] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f] [ 1.974766] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f] [ 1.974837] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf3504800-0xf3504bff] [ 1.974899] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.974905] pci 0000:00:1a.7: PME# disabled [ 1.974957] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf3500000-0xf3503fff] [ 1.975017] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.975022] pci 0000:00:1b.0: PME# disabled [ 1.975106] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.975111] pci 0000:00:1c.0: PME# disabled [ 1.975202] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.975206] pci 0000:00:1c.3: PME# disabled [ 1.975295] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.975299] pci 0000:00:1c.5: PME# disabled [ 1.975361] pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f] [ 1.975426] pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f] [ 1.975490] pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f] [ 1.975559] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf3504c00-0xf3504fff] [ 1.975620] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.975626] pci 0000:00:1d.7: PME# disabled [ 1.975792] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 1.975796] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO [ 1.975800] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 1.975803] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0600 (mask 003f) [ 1.975809] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007) [ 1.975860] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 1.975868] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 1.975875] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 1.975883] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 1.975890] pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af] [ 1.975965] pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df] [ 1.975972] pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf] [ 1.975980] pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7] [ 1.975987] pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb] [ 1.975994] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] [ 1.976002] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf3504000-0xf35047ff] [ 1.976044] pci 0000:00:1f.2: PME# supported from D3hot [ 1.976048] pci 0000:00:1f.2: PME# disabled [ 1.976081] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 1.976104] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] [ 1.976175] pci 0000:01:00.0: reg 10 32bit mmio: [0xf2000000-0xf2ffffff] [ 1.976187] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 1.976198] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf0000000-0xf1ffffff] [ 1.976204] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f] [ 1.976211] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 1.976306] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] [ 1.976309] pci 0000:00:01.0: bridge 32bit mmio: [0xf0000000-0xf2ffffff] [ 1.976313] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 1.976373] pci 0000:00:1c.0: bridge io port: [0x00-0xfff] [ 1.976377] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff] [ 1.976385] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff] [ 1.976567] pci 0000:06:00.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 1.976808] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.976821] pci 0000:06:00.0: PME# disabled [ 1.976934] pci 0000:00:1c.3: bridge io port: [0x00-0xfff] [ 1.976939] pci 0000:00:1c.3: bridge 32bit mmio: [0x000000-0x0fffff] [ 1.976946] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x000000-0x0fffff] [ 1.977168] pci 0000:08:00.0: reg 10 64bit mmio: [0x000000-0x00ffff] [ 1.977405] pci 0000:08:00.0: PME# supported from D3hot D3cold [ 1.977416] pci 0000:08:00.0: PME# disabled [ 1.977528] pci 0000:00:1c.5: bridge io port: [0x00-0xfff] [ 1.977532] pci 0000:00:1c.5: bridge 32bit mmio: [0x000000-0x0fffff] [ 1.977540] pci 0000:00:1c.5: bridge 64bit mmio pref: [0x000000-0x0fffff] [ 1.977600] pci 0000:0a:09.0: reg 10 32bit mmio: [0xf3200000-0xf32007ff] [ 1.977658] pci 0000:0a:09.0: supports D1 D2 [ 1.977660] pci 0000:0a:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.977664] pci 0000:0a:09.0: PME# disabled [ 1.977706] pci 0000:0a:09.1: reg 10 32bit mmio: [0xf3200800-0xf32008ff] [ 1.977765] pci 0000:0a:09.1: supports D1 D2 [ 1.977766] pci 0000:0a:09.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.977771] pci 0000:0a:09.1: PME# disabled [ 1.977812] pci 0000:0a:09.2: reg 10 32bit mmio: [0xf3200c00-0xf3200cff] [ 1.977871] pci 0000:0a:09.2: supports D1 D2 [ 1.977872] pci 0000:0a:09.2: PME# supported from D0 D1 D2 D3hot D3cold [ 1.977877] pci 0000:0a:09.2: PME# disabled [ 1.977918] pci 0000:0a:09.3: reg 10 32bit mmio: [0xf3201000-0xf32010ff] [ 1.977977] pci 0000:0a:09.3: supports D1 D2 [ 1.977979] pci 0000:0a:09.3: PME# supported from D0 D1 D2 D3hot D3cold [ 1.977983] pci 0000:0a:09.3: PME# disabled [ 1.978025] pci 0000:0a:09.4: reg 10 32bit mmio: [0xf3201400-0xf32014ff] [ 1.978085] pci 0000:0a:09.4: supports D1 D2 [ 1.978087] pci 0000:0a:09.4: PME# supported from D0 D1 D2 D3hot D3cold [ 1.978092] pci 0000:0a:09.4: PME# disabled [ 1.978145] pci 0000:00:1e.0: transparent bridge [ 1.978152] pci 0000:00:1e.0: bridge 32bit mmio: [0xf3200000-0xf32fffff] [ 1.978188] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.978371] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 1.978439] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 1.978507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 1.978566] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 1.978650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 1.978729] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 1.978734] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013ba2abc0), AE_NOT_FOUND [ 1.987895] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) [ 1.987986] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 1.988076] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 1.988165] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 1.988255] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 1.988344] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 1.988433] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 1.988522] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15) [ 1.988665] SCSI subsystem initialized [ 1.988683] libata version 3.00 loaded. [ 1.988683] usbcore: registered new interface driver usbfs [ 1.988683] usbcore: registered new interface driver hub [ 1.988683] usbcore: registered new device driver usb [ 1.988683] ACPI: WMI: Mapper loaded [ 1.988683] PCI: Using ACPI for IRQ routing [ 1.988683] pci 0000:00:1c.0: BAR 13: can't allocate resource [ 1.988683] pci 0000:00:1c.0: BAR 14: can't allocate resource [ 1.988683] pci 0000:00:1c.0: BAR 15: can't allocate resource [ 1.988683] pci 0000:00:1c.3: BAR 13: can't allocate resource [ 1.988683] pci 0000:00:1c.3: BAR 14: can't allocate resource [ 1.988683] pci 0000:00:1c.3: BAR 15: can't allocate resource [ 1.988683] pci 0000:00:1c.5: BAR 13: can't allocate resource [ 1.988683] pci 0000:00:1c.5: BAR 14: can't allocate resource [ 1.988683] pci 0000:00:1c.5: BAR 15: can't allocate resource [ 2.010005] Bluetooth: Core ver 2.15 [ 2.010020] NET: Registered protocol family 31 [ 2.010020] Bluetooth: HCI device and connection manager initialized [ 2.010020] Bluetooth: HCI socket layer initialized [ 2.010020] NetLabel: Initializing [ 2.010020] NetLabel: domain hash size = 128 [ 2.010020] NetLabel: protocols = UNLABELED CIPSOv4 [ 2.010030] NetLabel: unlabeled traffic allowed by default [ 2.010069] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 2.010073] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 2.030009] Switched to high resolution mode on CPU 0 [ 2.031439] Switched to high resolution mode on CPU 1 [ 2.050008] pnp: PnP ACPI init [ 2.050016] ACPI: bus type pnp registered [ 2.051835] pnp: PnP ACPI: found 11 devices [ 2.051837] ACPI: ACPI bus type pnp unregistered [ 2.051845] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 2.051848] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 2.051850] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 2.051852] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 2.051855] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved [ 2.051859] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 2.051862] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved [ 2.051864] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 2.051869] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved [ 2.051874] system 00:06: ioport range 0x680-0x69f has been reserved [ 2.051877] system 00:06: ioport range 0x800-0x80f has been reserved [ 2.051879] system 00:06: ioport range 0x1000-0x107f has been reserved [ 2.051881] system 00:06: ioport range 0x1180-0x11bf has been reserved [ 2.051886] system 00:06: ioport range 0x1640-0x164f has been reserved [ 2.051888] system 00:06: ioport range 0xfe00-0xfe00 has been reserved [ 2.056539] AppArmor: AppArmor Filesystem Enabled [ 2.056616] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff] [ 2.056619] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 2.056621] pci 0000:00:01.0: IO window: 0x2000-0x2fff [ 2.056625] pci 0000:00:01.0: MEM window: 0xf0000000-0xf2ffffff [ 2.056628] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 2.056632] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 2.056633] pci 0000:00:1c.0: IO window: disabled [ 2.056639] pci 0000:00:1c.0: MEM window: disabled [ 2.056643] pci 0000:00:1c.0: PREFETCH window: disabled [ 2.056699] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 [ 2.056700] pci 0000:00:1c.3: IO window: disabled [ 2.056706] pci 0000:00:1c.3: MEM window: 0xc0000000-0xc00fffff [ 2.056710] pci 0000:00:1c.3: PREFETCH window: disabled [ 2.056769] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08 [ 2.056770] pci 0000:00:1c.5: IO window: disabled [ 2.056776] pci 0000:00:1c.5: MEM window: 0xc0100000-0xc01fffff [ 2.056780] pci 0000:00:1c.5: PREFETCH window: disabled [ 2.056785] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a [ 2.056787] pci 0000:00:1e.0: IO window: disabled [ 2.056792] pci 0000:00:1e.0: MEM window: 0xf3200000-0xf32fffff [ 2.056797] pci 0000:00:1e.0: PREFETCH window: disabled [ 2.056807] alloc irq_desc for 16 on node 0 [ 2.056808] alloc kstat_irqs on node 0 [ 2.056812] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.056816] pci 0000:00:01.0: setting latency timer to 64 [ 2.056823] alloc irq_desc for 17 on node 0 [ 2.056824] alloc kstat_irqs on node 0 [ 2.056827] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.056833] pci 0000:00:1c.0: setting latency timer to 64 [ 2.056841] pci 0000:00:1c.3: enabling device (0000 -> 0002) [ 2.056844] alloc irq_desc for 19 on node 0 [ 2.056845] alloc kstat_irqs on node 0 [ 2.056848] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 2.056854] pci 0000:00:1c.3: setting latency timer to 64 [ 2.056861] pci 0000:00:1c.5: enabling device (0000 -> 0002) [ 2.056865] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 2.056870] pci 0000:00:1c.5: setting latency timer to 64 [ 2.056878] pci 0000:00:1e.0: setting latency timer to 64 [ 2.056882] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 2.056884] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 2.056886] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] [ 2.056888] pci_bus 0000:01: resource 1 mem: [0xf0000000-0xf2ffffff] [ 2.056890] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 2.056892] pci_bus 0000:02: resource 0 mem: [0x0-0xfff] [ 2.056894] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff] [ 2.056896] pci_bus 0000:02: resource 2 mem: [0x0-0xfffff] [ 2.056897] pci_bus 0000:06: resource 0 mem: [0x0-0xfff] [ 2.056899] pci_bus 0000:06: resource 1 mem: [0xc0000000-0xc00fffff] [ 2.056901] pci_bus 0000:06: resource 2 mem: [0x0-0xfffff] [ 2.056903] pci_bus 0000:08: resource 0 mem: [0x0-0xfff] [ 2.056905] pci_bus 0000:08: resource 1 mem: [0xc0100000-0xc01fffff] [ 2.056906] pci_bus 0000:08: resource 2 mem: [0x0-0xfffff] [ 2.056908] pci_bus 0000:0a: resource 1 mem: [0xf3200000-0xf32fffff] [ 2.056910] pci_bus 0000:0a: resource 3 io: [0x00-0xffff] [ 2.056912] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff] [ 2.056937] NET: Registered protocol family 2 [ 2.057079] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 2.058206] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 2.062404] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 2.062956] TCP: Hash tables configured (established 524288 bind 65536) [ 2.062958] TCP reno registered [ 2.063072] NET: Registered protocol family 1 [ 2.063144] Trying to unpack rootfs image as initramfs... [ 2.227135] Freeing initrd memory: 8248k freed [ 2.231167] Simple Boot Flag at 0x35 set to 0x1 [ 2.231337] Scanning for low memory corruption every 60 seconds [ 2.231471] audit: initializing netlink socket (disabled) [ 2.231487] type=2000 audit(1269071558.230:1): initialized [ 2.239920] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.241124] VFS: Disk quotas dquot_6.5.2 [ 2.241173] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.241670] fuse init (API version 7.12) [ 2.241740] msgmni has been set to 7927 [ 2.241920] alg: No test for stdrng (krng) [ 2.241932] io scheduler noop registered [ 2.241934] io scheduler anticipatory registered [ 2.241936] io scheduler deadline registered [ 2.241971] io scheduler cfq registered (default) [ 2.242132] pci 0000:01:00.0: Boot video device [ 2.242262] alloc irq_desc for 24 on node 0 [ 2.242264] alloc kstat_irqs on node 0 [ 2.242273] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 2.242278] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 2.242421] alloc irq_desc for 25 on node 0 [ 2.242423] alloc kstat_irqs on node 0 [ 2.242431] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 2.242442] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 2.242609] alloc irq_desc for 26 on node 0 [ 2.242611] alloc kstat_irqs on node 0 [ 2.242619] pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X [ 2.242629] pcieport-driver 0000:00:1c.3: setting latency timer to 64 [ 2.242791] alloc irq_desc for 27 on node 0 [ 2.242793] alloc kstat_irqs on node 0 [ 2.242801] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X [ 2.242812] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 2.242914] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.242978] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 2.242983] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013ba2abc0), AE_NOT_FOUND [ 2.243049] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 2.243054] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013ba2abc0), AE_NOT_FOUND [ 2.243108] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 2.243112] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013ba2abc0), AE_NOT_FOUND [ 2.243165] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 2.243170] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013ba2abc0), AE_NOT_FOUND [ 2.243236] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 2.243241] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013ba2abc0), AE_NOT_FOUND [ 2.243294] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 2.243298] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013ba2abc0), AE_NOT_FOUND [ 2.243351] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 2.243355] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013ba2abc0), AE_NOT_FOUND [ 2.243407] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND [ 2.243412] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88013ba2abc0), AE_NOT_FOUND [ 2.243448] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.380075] ACPI: AC Adapter [ACAD] (on-line) [ 2.380126] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 2.380130] ACPI: Power Button [PWRF] [ 2.380181] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 2.380235] ACPI: Lid Switch [LID] [ 2.380272] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 2.380274] ACPI: Power Button [PWRB] [ 2.380313] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 2.380315] ACPI: Sleep Button [SLPB] [ 2.380887] ACPI: SSDT 00000000bfed4754 002BC (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 2.381322] ACPI: SSDT 00000000bfed40d8 005F7 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 2.383361] Monitor-Mwait will be used to enter C-1 state [ 2.383386] Monitor-Mwait will be used to enter C-2 state [ 2.383403] Monitor-Mwait will be used to enter C-3 state [ 2.383409] Marking TSC unstable due to TSC halts in idle [ 2.383426] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 2.383446] processor LNXCPU:00: registered as cooling_device0 [ 2.383449] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2.383770] ACPI: SSDT 00000000bfed4a10 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 2.384055] ACPI: SSDT 00000000bfed46cf 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 2.384888] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 2.384904] processor LNXCPU:01: registered as cooling_device1 [ 2.384908] ACPI: Processor [CPU1] (supports 8 throttling states) [ 2.940054] thermal LNXTHERM:01: registered as thermal_zone0 [ 2.940060] ACPI: Thermal Zone [THRM] (36 C) [ 2.941028] Linux agpgart interface v0.103 [ 2.941036] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.942052] brd: module loaded [ 2.942412] loop: module loaded [ 2.942472] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 2.942579] ahci 0000:00:1f.2: version 3.0 [ 2.942593] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.942631] alloc irq_desc for 28 on node 0 [ 2.942633] alloc kstat_irqs on node 0 [ 2.942641] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 2.942701] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode [ 2.942704] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 2.942709] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.942953] ACPI: Battery Slot [BAT1] (battery absent) [ 2.942978] scsi0 : ahci [ 2.943047] scsi1 : ahci [ 2.943090] scsi2 : ahci [ 2.943175] ata1: SATA max UDMA/133 abar m2048@0xf3504000 port 0xf3504100 irq 28 [ 2.943178] ata2: SATA max UDMA/133 abar m2048@0xf3504000 port 0xf3504180 irq 28 [ 2.943181] ata3: SATA max UDMA/133 abar m2048@0xf3504000 port 0xf3504200 irq 28 [ 2.943257] ata_piix 0000:00:1f.1: version 2.13 [ 2.943265] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.943296] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.943370] scsi3 : ata_piix [ 2.943414] scsi4 : ata_piix [ 2.943921] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14 [ 2.943924] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15 [ 2.944588] Fixed MDIO Bus: probed [ 2.944617] PPP generic driver version 2.4.2 [ 2.944690] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.944859] alloc irq_desc for 18 on node 0 [ 2.944861] alloc kstat_irqs on node 0 [ 2.944865] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.944878] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 2.944881] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 2.944927] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 2.948834] ehci_hcd 0000:00:1a.7: debug port 1 [ 2.948840] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 2.948853] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3504800 [ 2.980015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 2.980082] usb usb1: configuration #1 chosen from 1 choice [ 2.980106] hub 1-0:1.0: USB hub found [ 2.980112] hub 1-0:1.0: 4 ports detected [ 2.980188] alloc irq_desc for 23 on node 0 [ 2.980189] alloc kstat_irqs on node 0 [ 2.980193] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 2.980202] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.980205] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.980232] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 2.984143] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.984148] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 2.984159] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3504c00 [ 3.000015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.000059] usb usb2: configuration #1 chosen from 1 choice [ 3.000082] hub 2-0:1.0: USB hub found [ 3.000087] hub 2-0:1.0: 6 ports detected [ 3.000142] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.000154] uhci_hcd: USB Universal Host Controller Interface driver [ 3.000222] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.000228] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 3.000231] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.000259] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 3.000294] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 [ 3.000361] usb usb3: configuration #1 chosen from 1 choice [ 3.000381] hub 3-0:1.0: USB hub found [ 3.000386] hub 3-0:1.0: 2 ports detected [ 3.000461] alloc irq_desc for 21 on node 0 [ 3.000463] alloc kstat_irqs on node 0 [ 3.000466] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 3.000472] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 3.000475] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.000501] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 3.000534] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 [ 3.000599] usb usb4: configuration #1 chosen from 1 choice [ 3.000618] hub 4-0:1.0: USB hub found [ 3.000625] hub 4-0:1.0: 2 ports detected [ 3.000694] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.000700] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3.000703] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.000729] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 3.000754] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840 [ 3.000821] usb usb5: configuration #1 chosen from 1 choice [ 3.000840] hub 5-0:1.0: USB hub found [ 3.000845] hub 5-0:1.0: 2 ports detected [ 3.000917] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.000923] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3.000926] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.000952] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 3.000984] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860 [ 3.001048] usb usb6: configuration #1 chosen from 1 choice [ 3.001070] hub 6-0:1.0: USB hub found [ 3.001075] hub 6-0:1.0: 2 ports detected [ 3.001142] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.001148] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3.001151] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.001175] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 3.001201] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880 [ 3.001267] usb usb7: configuration #1 chosen from 1 choice [ 3.001290] hub 7-0:1.0: USB hub found [ 3.001295] hub 7-0:1.0: 2 ports detected [ 3.001380] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 3.002971] i8042.c: Detected active multiplexing controller, rev 1.1. [ 3.003932] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.003937] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 3.003939] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 3.003942] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 3.003944] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 3.003992] mice: PS/2 mouse device common for all mice [ 3.004101] rtc_cmos 00:07: RTC can wake from S4 [ 3.004127] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 3.004157] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 3.004232] device-mapper: uevent: version 1.0.3 [ 3.004304] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 3.004372] device-mapper: multipath: version 1.1.0 loaded [ 3.004376] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.004586] cpuidle: using governor ladder [ 3.004678] cpuidle: using governor menu [ 3.004994] TCP cubic registered [ 3.005097] NET: Registered protocol family 10 [ 3.005451] lo: Disabled Privacy Extensions [ 3.005684] NET: Registered protocol family 17 [ 3.005705] Bluetooth: L2CAP ver 2.13 [ 3.005707] Bluetooth: L2CAP socket layer initialized [ 3.005710] Bluetooth: SCO (Voice Link) ver 0.6 [ 3.005711] Bluetooth: SCO socket layer initialized [ 3.005744] Bluetooth: RFCOMM TTY layer initialized [ 3.005747] Bluetooth: RFCOMM socket layer initialized [ 3.005748] Bluetooth: RFCOMM ver 1.11 [ 3.006329] PM: Resume from disk failed. [ 3.006340] registered taskstats version 1 [ 3.006449] Magic number: 2:563:875 [ 3.006540] rtc_cmos 00:07: setting system clock to 2010-03-20 07:52:39 UTC (1269071559) [ 3.006543] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.006544] EDD information not available. [ 3.034154] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 3.122252] ata4.00: ATAPI: TOSHIBA DVDW/HD TS-L802A, AC07, max UDMA/33 [ 3.161182] ata4.00: configured for UDMA/33 [ 3.290108] ata2: SATA link down (SStatus 0 SControl 300) [ 3.290134] ata3: SATA link down (SStatus 0 SControl 300) [ 3.290161] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.299880] ACPI Warning: \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer 20090521 nspredef-940 [ 3.299886] ata1.00: _GTF unexpected object type 0x1 [ 3.299976] ata1.00: ATA-8: SAMSUNG HM250HI, 2AC101C4, max UDMA/133 [ 3.299981] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.300050] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 3.309751] ata1.00: _GTF unexpected object type 0x1 [ 3.309843] ata1.00: configured for UDMA/133 [ 3.320175] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM250HI 2AC1 PQ: 0 ANSI: 5 [ 3.320284] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.320313] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 3.320349] sd 0:0:0:0: [sda] Write Protect is off [ 3.320352] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.320371] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.320477] sda: [ 3.331178] scsi 3:0:0:0: CD-ROM TOSHIBA DVDW/HD TS-L802A AC07 PQ: 0 ANSI: 5 [ 3.346051] sda1 sda2 < sda5sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.374605] Uniform CD-ROM driver Revision: 3.20 [ 3.374723] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 3.374766] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 3.385205] sda6 > [ 3.385496] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.385509] Freeing unused kernel memory: 660k freed [ 3.385743] Write protecting the kernel read-only data: 7580k [ 3.468259] usb 1-2: configuration #1 chosen from 1 choice [ 3.495449] tg3.c:v3.99 (April 20, 2009) [ 3.495509] tg3 0000:08:00.0: enabling device (0000 -> 0002) [ 3.495520] tg3 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.495540] tg3 0000:08:00.0: setting latency timer to 64 [ 3.500020] Clocksource tsc unstable (delta = -247246253 ns) [ 3.517752] tg3 0000:08:00.0: wake-up capability disabled by ACPI [ 3.517766] tg3 0000:08:00.0: PME# disabled [ 3.521767] ohci1394 0000:0a:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.559152] eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:1e:68:0a:cf:dc [ 3.559155] eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1]) [ 3.559158] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 3.559160] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 3.582097] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f3200000-f32007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 4.110368] acpi device:04: registered as cooling_device2 [ 4.110774] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input6 [ 4.110813] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 4.910822] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b00e06dad00] [ 4.987485] xor: automatically using best checksumming function: generic_sse [ 5.030014] generic_sse: 9650.400 MB/sec [ 5.030016] xor: using function: generic_sse (9650.400 MB/sec) [ 5.085968] device-mapper: dm-raid45: initialized v0.2594b [ 5.229640] PM: Starting manual resume from disk [ 5.229644] PM: Resume from partition 8:6 [ 5.229645] PM: Checking hibernation image. [ 5.229774] PM: Resume from disk failed. [ 5.258368] EXT4-fs (sda1): barriers enabled [ 5.269474] kjournald2 starting: pid 466, dev sda1:8, commit interval 5 seconds [ 5.269501] EXT4-fs (sda1): delayed allocation enabled [ 5.269507] EXT4-fs: file extents enabled [ 5.271420] EXT4-fs: mballoc enabled [ 5.271433] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 6.654942] Adding 8000328k swap on /dev/sda6. Priority:-1 extents:1 across:8000328k [ 7.022220] udev: starting version 147 [ 8.146530] acer-wmi: Acer Laptop ACPI-WMI Extras [ 8.146956] acer-wmi: Brightness must be controlled by generic video driver [ 8.522248] EXT4-fs (sda1): internal journal on sda1:8 [ 9.417276] nvidia: module license 'NVIDIA' taints kernel. [ 9.417281] Disabling lock debugging due to kernel taint [ 9.435011] lp: driver loaded but no devices found [ 9.444684] Linux video capture interface: v2.00 [ 9.493786] uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101) [ 9.496376] input: Acer CrystalEye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input7 [ 9.496411] usbcore: registered new interface driver uvcvideo [ 9.496413] USB Video Class driver (v0.1.0) [ 9.632721] ricoh-mmc: Ricoh MMC Controller disabling driver [ 9.632723] ricoh-mmc: Copyright(c) Philip Langdale [ 9.643570] sdhci: Secure Digital Host Controller Interface driver [ 9.643572] sdhci: Copyright(c) Pierre Ossman [ 9.670189] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.671449] ricoh-mmc: Ricoh MMC controller found at 0000:0a:09.2 [1180:0843] (rev 12) [ 9.671471] ricoh-mmc: Controller is now disabled. [ 9.671608] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.671617] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.671877] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.36 Fri Aug 14 17:35:21 PDT 2009 [ 9.692565] sdhci-pci 0000:0a:09.1: SDHCI controller found [1180:0822] (rev 22) [ 9.692582] sdhci-pci 0000:0a:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 9.693613] sdhci-pci 0000:0a:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 9.694659] Registered led device: mmc0:: [ 9.695700] mmc0: SDHCI controller on PCI [0000:0a:09.1] using DMA [ 9.822638] cfg80211: Calling CRDA to update world regulatory domain [ 10.393711] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1e0b1, caps: 0xc04751/0xe0500f [ 10.429841] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input8 [ 10.471883] alloc irq_desc for 22 on node 0 [ 10.471886] alloc kstat_irqs on node 0 [ 10.471891] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 10.471963] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 10.485286] cfg80211: World regulatory domain updated: [ 10.485288] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.485291] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.485293] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.485295] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.485297] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.485299] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.692837] EXT4-fs (sda5): barriers enabled [ 10.720796] kjournald2 starting: pid 850, dev sda5:8, commit interval 5 seconds [ 10.742930] EXT4-fs (sda5): internal journal on sda5:8 [ 10.742936] EXT4-fs (sda5): delayed allocation enabled [ 10.742941] EXT4-fs: file extents enabled [ 10.747543] EXT4-fs: mballoc enabled [ 10.747557] EXT4-fs (sda5): mounted filesystem with ordered data mode [ 10.849321] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 11.037550] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000 [ 11.070446] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10 [ 11.995655] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks [ 11.995658] iwl3945: Copyright(c) 2003-2009 Intel Corporation [ 11.996099] iwl3945 0000:06:00.0: enabling device (0000 -> 0002) [ 11.996111] iwl3945 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 11.996130] iwl3945 0000:06:00.0: setting latency timer to 64 [ 12.065618] iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels [ 12.065621] iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 12.065736] alloc irq_desc for 29 on node 0 [ 12.065737] alloc kstat_irqs on node 0 [ 12.065769] iwl3945 0000:06:00.0: irq 29 for MSI/MSI-X [ 12.328795] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 15.665588] usplash:407 freeing invalid memtype fffffffff1000000-fffffffff1e00000 [ 15.955600] iwl3945 0000:06:00.0: firmware: requesting iwlwifi-3945-2.ucode [ 16.093161] iwl3945 0000:06:00.0: loaded firmware version 15.32.2.9 [ 16.160330] Registered led device: iwl-phy0::radio [ 16.160346] Registered led device: iwl-phy0::assoc [ 16.160399] Registered led device: iwl-phy0::RX [ 16.160412] Registered led device: iwl-phy0::TX [ 16.201284] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 16.202343] tg3 0000:08:00.0: wake-up capability disabled by ACPI [ 16.202356] tg3 0000:08:00.0: PME# disabled [ 16.202551] alloc irq_desc for 30 on node 0 [ 16.202553] alloc kstat_irqs on node 0 [ 16.202583] tg3 0000:08:00.0: irq 30 for MSI/MSI-X [ 16.415715] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.988057] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 17.988059] tg3: eth0: Flow control is on for TX and on for RX. [ 17.988424] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 24.136060] ppdev: user-space parallel port driver [ 28.790082] eth0: no IPv6 routers present [ 182.503978] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 182.503981] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 182.503985] PM: Marking nosave pages: 00000000bfed0000 - 0000000100000000 [ 182.504692] PM: Basic memory bitmaps created [ 182.504693] PM: Syncing filesystems ... done. [ 182.506775] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 182.512567] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 182.512616] PM: Shrinking memory... -\|/-\done (44140 pages freed) [ 186.783830] PM: Freed 176560 kbytes in 4.27 seconds (41.34 MB/s) [ 186.783832] Suspending console(s) (use no_console_suspend to debug) [ 187.060220] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 187.060995] ACPI handle has no context! [ 187.062062] ACPI handle has no context! [ 187.062067] sdhci-pci 0000:0a:09.1: PME# disabled [ 187.062073] sdhci-pci 0000:0a:09.1: PCI INT B disabled [ 187.062078] ACPI handle has no context! [ 187.085273] ACPI handle has no context! [ 187.210490] ata_piix 0000:00:1f.1: PCI INT A disabled [ 187.320292] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 187.340437] ricoh-mmc: Suspending. [ 187.340446] ricoh-mmc: Controller is now re-enabled. [ 187.341322] ACPI: Preparing to enter system sleep state S4 [ 187.640075] PM: Saving platform NVS memory [ 187.640977] Disabling non-boot CPUs ... [ 187.750020] CPU 1 is now offline [ 187.750022] SMP alternatives: switching to UP code [ 187.755870] CPU0 attaching NULL sched-domain. [ 187.755873] CPU1 attaching NULL sched-domain. [ 187.755881] CPU0 attaching NULL sched-domain. [ 187.756038] CPU1 is down [ 187.756079] Extended CMOS year: 2000 [ 187.756164] PM: Creating hibernation image: [ 187.760011] PM: Need to copy 127098 pages [ 187.760011] PM: Normal pages needed: 127098 + 1024 + 88, available pages: 921071 [ 187.760011] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 187.760011] PM: Restoring platform NVS memory [ 187.760011] CPU0: Thermal monitoring handled by SMI [ 187.760011] Extended CMOS year: 2000 [ 187.760011] Enabling non-boot CPUs ... [ 187.760011] SMP alternatives: switching to SMP code [ 187.761988] Booting processor 1 APIC 0x1 ip 0x6000 [ 187.755748] Initializing CPU#1 [ 187.755748] Calibrating delay using timer specific routine.. 4797.84 BogoMIPS (lpj=23989200) [ 187.755748] CPU: L1 I cache: 32K, L1 D cache: 32K [ 187.755748] CPU: L2 cache: 3072K [ 187.755748] CPU 1/0x1 -> Node 0 [ 187.755748] CPU: Physical Processor ID: 0 [ 187.755748] CPU: Processor Core ID: 1 [ 187.755748] mce: CPU supports 6 MCE banks [ 187.755748] CPU1: Thermal monitoring enabled (TM2) [ 187.755748] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 187.921467] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 187.921533] CPU0 attaching NULL sched-domain. [ 187.922516] Switched to high resolution mode on CPU 1 [ 187.960027] CPU0 attaching sched-domain: [ 187.960030] domain 0: span 0-1 level MC [ 187.960032] groups: 0 1 [ 187.960035] CPU1 attaching sched-domain: [ 187.960036] domain 0: span 0-1 level MC [ 187.960038] groups: 1 0 [ 187.962521] CPU1 is up [ 187.962550] ACPI: Waking up from system sleep state S4 [ 188.860210] ehci_hcd 0000:00:1a.7: PME# disabled [ 188.860249] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 188.860578] ehci_hcd 0000:00:1d.7: PME# disabled [ 188.860685] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800005) [ 188.860726] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 188.860813] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [ 188.861019] iwl3945 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [ 188.861255] tg3 0000:08:00.0: restoring config space at offset 0xc (was 0x0, writing 0xcbbe0000) [ 188.880045] ohci1394 0000:0a:09.0: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 188.880051] ohci1394 0000:0a:09.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 188.880135] ricoh-mmc: Resuming. [ 188.880143] ricoh-mmc: Controller is now disabled. [ 189.065537] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 189.065585] usb usb3: root hub lost power or was reset [ 189.065602] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 189.065636] usb usb4: root hub lost power or was reset [ 189.065653] ehci_hcd 0000:00:1a.7: PME# disabled [ 189.065657] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 189.065661] usb usb1: root hub lost power or was reset [ 189.069540] ehci_hcd 0000:00:1a.7: debug port 1 [ 189.069545] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 189.069556] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 189.069561] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 189.069587] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 189.069621] usb usb5: root hub lost power or was reset [ 189.069637] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 189.069671] usb usb6: root hub lost power or was reset [ 189.069687] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 189.069721] usb usb7: root hub lost power or was reset [ 189.069738] ehci_hcd 0000:00:1d.7: PME# disabled [ 189.069742] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 189.069746] usb usb2: root hub lost power or was reset [ 189.073630] ehci_hcd 0000:00:1d.7: debug port 1 [ 189.073636] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 189.073646] pci 0000:00:1e.0: setting latency timer to 64 [ 189.073653] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 189.073658] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 189.074568] ahci 0000:00:1f.2: setting latency timer to 64 [ 189.261974] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 189.261977] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [ 189.301497] ata4.00: configured for UDMA/33 [ 189.430110] ata3: SATA link down (SStatus 0 SControl 300) [ 189.430159] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 189.430237] ata2: SATA link down (SStatus 0 SControl 300) [ 189.439874] ata1.00: _GTF unexpected object type 0x1 [ 189.449693] ata1.00: _GTF unexpected object type 0x1 [ 189.449800] ata1.00: configured for UDMA/133 [ 189.524803] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f3200000-f32007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 189.530818] sdhci-pci 0000:0a:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 189.530821] sdhci-pci 0000:0a:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 189.531844] pci 0000:0a:09.3: PME# disabled [ 189.531849] pci 0000:0a:09.4: PME# disabled [ 189.944381] sd 0:0:0:0: [sda] Starting disk [ 189.965693] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen [ 189.965697] ata1.00: irq_stat 0x00400001, PHY RDY changed [ 189.965701] ata1: SError: { PHYRdyChg CommWake } [ 189.965710] ata1.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 [ 189.965711] res 50/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 189.965715] ata1.00: status: { DRDY } [ 189.965721] ata1: hard resetting link [ 190.710234] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 190.719952] ata1.00: _GTF unexpected object type 0x1 [ 190.729772] ata1.00: _GTF unexpected object type 0x1 [ 190.729881] ata1.00: configured for UDMA/133 [ 190.729890] ata1: EH complete [ 190.756346] PM: Image restored successfully. [ 190.790621] Restarting tasks ... done. [ 190.791087] PM: Basic memory bitmaps freed [ 200.890146] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 204.043025] Registered led device: iwl-phy0::radio [ 204.043124] Registered led device: iwl-phy0::assoc [ 204.043163] Registered led device: iwl-phy0::RX [ 204.043202] Registered led device: iwl-phy0::TX [ 204.102804] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 204.103627] tg3 0000:08:00.0: PME# disabled [ 204.103889] tg3 0000:08:00.0: irq 30 for MSI/MSI-X [ 204.316602] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 205.910354] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 205.910361] tg3: eth0: Flow control is on for TX and on for RX. [ 205.913419] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 216.090052] eth0: no IPv6 routers present [ 1175.947053] CE: hpet increasing min_delta_ns to 15000 nsec [ 1175.947108] CE: hpet increasing min_delta_ns to 22500 nsec [ 1882.963491] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 1882.963495] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 1882.963499] PM: Marking nosave pages: 00000000bfed0000 - 0000000100000000 [ 1882.964244] PM: Basic memory bitmaps created [ 1882.964246] PM: Syncing filesystems ... done. [ 1882.966255] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 1882.967269] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 1882.967329] PM: Shrinking memory... -\|/-\|/-\|/-\|done (129756 pages freed) [ 1887.215285] PM: Freed 519024 kbytes in 4.24 seconds (122.41 MB/s) [ 1887.215287] Suspending console(s) (use no_console_suspend to debug) [ 1887.490213] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1887.490988] ACPI handle has no context! [ 1887.492055] ACPI handle has no context! [ 1887.492060] sdhci-pci 0000:0a:09.1: PME# disabled [ 1887.492066] sdhci-pci 0000:0a:09.1: PCI INT B disabled [ 1887.492071] ACPI handle has no context! [ 1887.515264] ACPI handle has no context! [ 1887.640434] ata_piix 0000:00:1f.1: PCI INT A disabled [ 1887.640462] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 1887.660432] ricoh-mmc: Suspending. [ 1887.660441] ricoh-mmc: Controller is now re-enabled. [ 1887.661317] ACPI: Preparing to enter system sleep state S4 [ 1887.960072] PM: Saving platform NVS memory [ 1887.960969] Disabling non-boot CPUs ... [ 1888.070015] CPU 1 is now offline [ 1888.070018] SMP alternatives: switching to UP code [ 1888.075836] CPU0 attaching NULL sched-domain. [ 1888.075839] CPU1 attaching NULL sched-domain. [ 1888.075847] CPU0 attaching NULL sched-domain. [ 1888.076001] CPU1 is down [ 1888.076042] Extended CMOS year: 2000 [ 1888.076127] PM: Creating hibernation image: [ 1888.080006] PM: Need to copy 127187 pages [ 1888.080006] PM: Normal pages needed: 127187 + 1024 + 88, available pages: 920974 [ 1888.080006] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 1888.080006] PM: Restoring platform NVS memory [ 1888.080006] CPU0: Thermal monitoring handled by SMI [ 1888.080006] Extended CMOS year: 2000 [ 1888.080006] Enabling non-boot CPUs ... [ 1888.080006] SMP alternatives: switching to SMP code [ 1888.081961] Booting processor 1 APIC 0x1 ip 0x6000 [ 1888.075687] Initializing CPU#1 [ 1888.075687] Calibrating delay using timer specific routine.. 4800.26 BogoMIPS (lpj=24001348) [ 1888.075687] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1888.075687] CPU: L2 cache: 3072K [ 1888.075687] CPU 1/0x1 -> Node 0 [ 1888.075687] CPU: Physical Processor ID: 0 [ 1888.075687] CPU: Processor Core ID: 1 [ 1888.075687] mce: CPU supports 6 MCE banks [ 1888.075687] CPU1: Thermal monitoring enabled (TM2) [ 1888.075687] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 1888.241461] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 1888.241526] CPU0 attaching NULL sched-domain. [ 1888.242515] Switched to high resolution mode on CPU 1 [ 1888.280021] CPU0 attaching sched-domain: [ 1888.280024] domain 0: span 0-1 level MC [ 1888.280026] groups: 0 1 [ 1888.280029] CPU1 attaching sched-domain: [ 1888.280031] domain 0: span 0-1 level MC [ 1888.280032] groups: 1 0 [ 1888.282515] CPU1 is up [ 1888.282545] ACPI: Waking up from system sleep state S4 [ 1889.180205] ehci_hcd 0000:00:1a.7: PME# disabled [ 1889.180244] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 1889.180575] ehci_hcd 0000:00:1d.7: PME# disabled [ 1889.180681] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800005) [ 1889.180722] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 1889.180809] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [ 1889.181015] iwl3945 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [ 1889.181251] tg3 0000:08:00.0: restoring config space at offset 0xc (was 0x0, writing 0xcbbe0000) [ 1889.200039] ohci1394 0000:0a:09.0: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 1889.200046] ohci1394 0000:0a:09.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 1889.200130] ricoh-mmc: Resuming. [ 1889.200138] ricoh-mmc: Controller is now disabled. [ 1889.385686] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1889.385734] usb usb3: root hub lost power or was reset [ 1889.385751] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1889.385786] usb usb4: root hub lost power or was reset [ 1889.385802] ehci_hcd 0000:00:1a.7: PME# disabled [ 1889.385807] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1889.385811] usb usb1: root hub lost power or was reset [ 1889.389683] ehci_hcd 0000:00:1a.7: debug port 1 [ 1889.389688] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1889.389699] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1889.389705] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 1889.389731] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1889.389765] usb usb5: root hub lost power or was reset [ 1889.389782] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1889.389816] usb usb6: root hub lost power or was reset [ 1889.389833] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1889.389868] usb usb7: root hub lost power or was reset [ 1889.389884] ehci_hcd 0000:00:1d.7: PME# disabled [ 1889.389888] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1889.389893] usb usb2: root hub lost power or was reset [ 1889.393772] ehci_hcd 0000:00:1d.7: debug port 1 [ 1889.393778] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1889.393787] pci 0000:00:1e.0: setting latency timer to 64 [ 1889.393795] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1889.393799] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1889.394709] ahci 0000:00:1f.2: setting latency timer to 64 [ 1889.581581] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 1889.581584] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [ 1889.621525] ata4.00: configured for UDMA/33 [ 1889.750154] ata3: SATA link down (SStatus 0 SControl 300) [ 1889.750266] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1889.750357] ata2: SATA link down (SStatus 0 SControl 300) [ 1889.759991] ata1.00: _GTF unexpected object type 0x1 [ 1889.769833] ata1.00: _GTF unexpected object type 0x1 [ 1889.769936] ata1.00: configured for UDMA/133 [ 1889.854799] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f3200000-f32007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1889.860817] sdhci-pci 0000:0a:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1889.860820] sdhci-pci 0000:0a:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1889.861844] pci 0000:0a:09.3: PME# disabled [ 1889.861850] pci 0000:0a:09.4: PME# disabled [ 1890.275109] sd 0:0:0:0: [sda] Starting disk [ 1890.300587] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen [ 1890.300591] ata1.00: irq_stat 0x00400001, PHY RDY changed [ 1890.300595] ata1: SError: { PHYRdyChg CommWake } [ 1890.300603] ata1.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 [ 1890.300605] res 50/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 1890.300609] ata1.00: status: { DRDY } [ 1890.300615] ata1: hard resetting link [ 1891.050227] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1891.059954] ata1.00: _GTF unexpected object type 0x1 [ 1891.069809] ata1.00: _GTF unexpected object type 0x1 [ 1891.069918] ata1.00: configured for UDMA/133 [ 1891.069927] ata1: EH complete [ 1891.090957] PM: Image restored successfully. [ 1891.131108] Restarting tasks ... done. [ 1891.131612] PM: Basic memory bitmaps freed [ 1905.590137] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 1910.712832] Registered led device: iwl-phy0::radio [ 1910.712930] Registered led device: iwl-phy0::assoc [ 1910.712971] Registered led device: iwl-phy0::RX [ 1910.713010] Registered led device: iwl-phy0::TX [ 1910.771256] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 1910.772046] tg3 0000:08:00.0: PME# disabled [ 1910.772305] tg3 0000:08:00.0: irq 30 for MSI/MSI-X [ 1910.986790] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 1912.578854] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 1912.578862] tg3: eth0: Flow control is on for TX and on for RX. [ 1912.579932] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1923.230224] eth0: no IPv6 routers present [ 1947.820073] ACPI: EC: missing confirmations, switch off interrupt mode. [ 1950.571943] tg3: eth0: Link is down. [ 3148.904860] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 3148.904868] tg3: eth0: Flow control is on for TX and on for RX. [ 8056.668741] tg3: eth0: Link is down. [ 8058.732983] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 8058.732991] tg3: eth0: Flow control is on for TX and on for RX. [ 8362.551542] tg3: eth0: Link is down. [ 8364.576650] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 8364.576658] tg3: eth0: Flow control is on for TX and on for RX. [ 8365.015904] tg3: eth0: Link is down. [ 8367.940567] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 8367.940572] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 8367.940578] PM: Marking nosave pages: 00000000bfed0000 - 0000000100000000 [ 8367.941665] PM: Basic memory bitmaps created [ 8367.941667] PM: Syncing filesystems ... done. [ 8368.015944] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 8368.016919] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 8368.016976] PM: Shrinking memory... -\|/-\|done (53752 pages freed) [ 8371.877063] PM: Freed 215008 kbytes in 3.86 seconds (55.70 MB/s) [ 8371.877066] Suspending console(s) (use no_console_suspend to debug) [ 8371.932815] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 8371.933621] ACPI handle has no context! [ 8371.934703] ACPI handle has no context! [ 8371.934710] sdhci-pci 0000:0a:09.1: PME# disabled [ 8371.934717] sdhci-pci 0000:0a:09.1: PCI INT B disabled [ 8371.934724] ACPI handle has no context! [ 8371.955096] ACPI handle has no context! [ 8372.090528] ata_piix 0000:00:1f.1: PCI INT A disabled [ 8372.090561] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 8372.110429] ricoh-mmc: Suspending. [ 8372.110440] ricoh-mmc: Controller is now re-enabled. [ 8372.111602] ACPI: Preparing to enter system sleep state S4 [ 8372.410089] PM: Saving platform NVS memory [ 8372.411117] Disabling non-boot CPUs ... [ 8372.520019] CPU 1 is now offline [ 8372.520022] SMP alternatives: switching to UP code [ 8372.528378] CPU0 attaching NULL sched-domain. [ 8372.528382] CPU1 attaching NULL sched-domain. [ 8372.528394] CPU0 attaching NULL sched-domain. [ 8372.528595] CPU1 is down [ 8372.528646] Extended CMOS year: 2000 [ 8372.528734] PM: Creating hibernation image: [ 8372.530007] PM: Need to copy 126798 pages [ 8372.530007] PM: Normal pages needed: 126798 + 1024 + 88, available pages: 921371 [ 8372.530007] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 8372.530007] PM: Restoring platform NVS memory [ 8372.530007] CPU0: Thermal monitoring handled by SMI [ 8372.530007] Extended CMOS year: 2000 [ 8372.530007] Enabling non-boot CPUs ... [ 8372.530007] SMP alternatives: switching to SMP code [ 8372.534518] Booting processor 1 APIC 0x1 ip 0x6000 [ 8372.528227] Initializing CPU#1 [ 8372.528227] Calibrating delay using timer specific routine.. 4800.23 BogoMIPS (lpj=24001188) [ 8372.528227] CPU: L1 I cache: 32K, L1 D cache: 32K [ 8372.528227] CPU: L2 cache: 3072K [ 8372.528227] CPU 1/0x1 -> Node 0 [ 8372.528227] CPU: Physical Processor ID: 0 [ 8372.528227] CPU: Processor Core ID: 1 [ 8372.528227] mce: CPU supports 6 MCE banks [ 8372.528227] CPU1: Thermal monitoring enabled (TM2) [ 8372.528227] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 8372.691424] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 8372.691482] CPU0 attaching NULL sched-domain. [ 8372.692516] Switched to high resolution mode on CPU 1 [ 8372.730020] CPU0 attaching sched-domain: [ 8372.730023] domain 0: span 0-1 level MC [ 8372.730024] groups: 0 1 [ 8372.730028] CPU1 attaching sched-domain: [ 8372.730029] domain 0: span 0-1 level MC [ 8372.730031] groups: 1 0 [ 8372.732516] CPU1 is up [ 8372.732545] ACPI: Waking up from system sleep state S4 [ 8373.630208] ehci_hcd 0000:00:1a.7: PME# disabled [ 8373.630246] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 8373.630577] ehci_hcd 0000:00:1d.7: PME# disabled [ 8373.630683] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800005) [ 8373.630725] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 8373.630811] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [ 8373.631018] iwl3945 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [ 8373.631254] tg3 0000:08:00.0: restoring config space at offset 0xc (was 0x0, writing 0xcbbe0000) [ 8373.650043] ohci1394 0000:0a:09.0: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 8373.650050] ohci1394 0000:0a:09.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 8373.650134] ricoh-mmc: Resuming. [ 8373.650143] ricoh-mmc: Controller is now disabled. [ 8373.834356] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 8373.834393] usb usb3: root hub lost power or was reset [ 8373.834410] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 8373.834445] usb usb4: root hub lost power or was reset [ 8373.834463] ehci_hcd 0000:00:1a.7: PME# disabled [ 8373.834467] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 8373.834472] usb usb1: root hub lost power or was reset [ 8373.838357] ehci_hcd 0000:00:1a.7: debug port 1 [ 8373.838363] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 8373.838374] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8373.838380] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8373.838407] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8373.838442] usb usb5: root hub lost power or was reset [ 8373.838460] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8373.838495] usb usb6: root hub lost power or was reset [ 8373.838512] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8373.838546] usb usb7: root hub lost power or was reset [ 8373.838563] ehci_hcd 0000:00:1d.7: PME# disabled [ 8373.838568] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 8373.838572] usb usb2: root hub lost power or was reset [ 8373.842478] ehci_hcd 0000:00:1d.7: debug port 1 [ 8373.842483] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 8373.842493] pci 0000:00:1e.0: setting latency timer to 64 [ 8373.842503] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 8373.842515] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 8373.842532] ahci 0000:00:1f.2: setting latency timer to 64 [ 8374.024606] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 8374.024608] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [ 8374.074301] ata4.00: configured for UDMA/33 [ 8374.202641] ata2: SATA link down (SStatus 0 SControl 300) [ 8374.202754] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8374.212460] ata1.00: _GTF unexpected object type 0x1 [ 8374.222250] ata1.00: _GTF unexpected object type 0x1 [ 8374.222342] ata1.00: configured for UDMA/133 [ 8374.234187] ata3: SATA link down (SStatus 0 SControl 300) [ 8374.292246] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f3200000-f32007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 8374.298328] sdhci-pci 0000:0a:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8374.298331] sdhci-pci 0000:0a:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 8374.299354] pci 0000:0a:09.3: PME# disabled [ 8374.299359] pci 0000:0a:09.4: PME# disabled [ 8374.702972] sd 0:0:0:0: [sda] Starting disk [ 8374.723022] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen [ 8374.723025] ata1.00: irq_stat 0x00400001, PHY RDY changed [ 8374.723030] ata1: SError: { PHYRdyChg CommWake } [ 8374.723038] ata1.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 [ 8374.723040] res 50/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 8374.723044] ata1.00: status: { DRDY } [ 8374.723049] ata1: hard resetting link [ 8375.470231] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8375.479940] ata1.00: _GTF unexpected object type 0x1 [ 8375.489806] ata1.00: _GTF unexpected object type 0x1 [ 8375.489913] ata1.00: configured for UDMA/133 [ 8375.489923] ata1: EH complete [ 8375.513181] PM: Image restored successfully. [ 8375.547266] Restarting tasks ... done. [ 8375.575813] PM: Basic memory bitmaps freed [ 8377.043774] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 8380.540180] Registered led device: iwl-phy0::radio [ 8380.540278] Registered led device: iwl-phy0::assoc [ 8380.540320] Registered led device: iwl-phy0::RX [ 8380.540360] Registered led device: iwl-phy0::TX [ 8380.591823] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8380.593870] tg3 0000:08:00.0: PME# disabled [ 8380.594195] tg3 0000:08:00.0: irq 30 for MSI/MSI-X [ 8380.807288] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8382.597287] tg3: eth0: Link is up at 100 Mbps, full duplex. [ 8382.597295] tg3: eth0: Flow control is on for TX and on for RX. [ 8382.598364] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8393.190223] eth0: no IPv6 routers present [ 8619.096052] tg3: eth0: Link is down. [ 8623.198961] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 8623.198964] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 8623.198968] PM: Marking nosave pages: 00000000bfed0000 - 0000000100000000 [ 8623.199656] PM: Basic memory bitmaps created [ 8623.199657] PM: Syncing filesystems ... done. [ 8623.200953] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 8623.201866] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 8623.201934] PM: Shrinking memory... -\|/-\|/done (61298 pages freed) [ 8628.393342] PM: Freed 245192 kbytes in 5.19 seconds (47.24 MB/s) [ 8628.393345] Suspending console(s) (use no_console_suspend to debug) [ 8628.680215] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 8628.717341] ACPI handle has no context! [ 8628.718408] ACPI handle has no context! [ 8628.718413] sdhci-pci 0000:0a:09.1: PME# disabled [ 8628.718419] sdhci-pci 0000:0a:09.1: PCI INT B disabled [ 8628.718425] ACPI handle has no context! [ 8628.735266] ACPI handle has no context! [ 8628.860619] ata_piix 0000:00:1f.1: PCI INT A disabled [ 8628.860647] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 8628.880434] ricoh-mmc: Suspending. [ 8628.880443] ricoh-mmc: Controller is now re-enabled. [ 8628.881318] ACPI: Preparing to enter system sleep state S4 [ 8629.180068] PM: Saving platform NVS memory [ 8629.180970] Disabling non-boot CPUs ... [ 8629.290014] CPU 1 is now offline [ 8629.290017] SMP alternatives: switching to UP code [ 8629.295835] CPU0 attaching NULL sched-domain. [ 8629.295838] CPU1 attaching NULL sched-domain. [ 8629.295846] CPU0 attaching NULL sched-domain. [ 8629.295998] CPU1 is down [ 8629.296039] Extended CMOS year: 2000 [ 8629.296124] PM: Creating hibernation image: [ 8629.300006] PM: Need to copy 127492 pages [ 8629.300006] PM: Normal pages needed: 127492 + 1024 + 88, available pages: 920677 [ 8629.300006] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 8629.300006] PM: Restoring platform NVS memory [ 8629.300006] CPU0: Thermal monitoring handled by SMI [ 8629.300006] Extended CMOS year: 2000 [ 8629.300006] Enabling non-boot CPUs ... [ 8629.300006] SMP alternatives: switching to SMP code [ 8629.301923] Booting processor 1 APIC 0x1 ip 0x6000 [ 8629.295706] Initializing CPU#1 [ 8629.295706] Calibrating delay using timer specific routine.. 4800.26 BogoMIPS (lpj=24001303) [ 8629.295706] CPU: L1 I cache: 32K, L1 D cache: 32K [ 8629.295706] CPU: L2 cache: 3072K [ 8629.295706] CPU 1/0x1 -> Node 0 [ 8629.295706] CPU: Physical Processor ID: 0 [ 8629.295706] CPU: Processor Core ID: 1 [ 8629.295706] mce: CPU supports 6 MCE banks [ 8629.295706] CPU1: Thermal monitoring enabled (TM2) [ 8629.295706] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 8629.461424] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 8629.461491] CPU0 attaching NULL sched-domain. [ 8629.462515] Switched to high resolution mode on CPU 1 [ 8629.500021] CPU0 attaching sched-domain: [ 8629.500024] domain 0: span 0-1 level MC [ 8629.500026] groups: 0 1 [ 8629.500029] CPU1 attaching sched-domain: [ 8629.500031] domain 0: span 0-1 level MC [ 8629.500033] groups: 1 0 [ 8629.502515] CPU1 is up [ 8629.502545] ACPI: Waking up from system sleep state S4 [ 8630.400206] ehci_hcd 0000:00:1a.7: PME# disabled [ 8630.400244] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 8630.400575] ehci_hcd 0000:00:1d.7: PME# disabled [ 8630.400680] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800005) [ 8630.400721] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 8630.400806] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [ 8630.401014] iwl3945 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [ 8630.401251] tg3 0000:08:00.0: restoring config space at offset 0xc (was 0x0, writing 0xcb3e0000) [ 8630.420040] ohci1394 0000:0a:09.0: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 8630.420046] ohci1394 0000:0a:09.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 8630.420131] ricoh-mmc: Resuming. [ 8630.420139] ricoh-mmc: Controller is now disabled. [ 8630.605737] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 8630.605783] usb usb3: root hub lost power or was reset [ 8630.605800] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 8630.605834] usb usb4: root hub lost power or was reset [ 8630.605851] ehci_hcd 0000:00:1a.7: PME# disabled [ 8630.605855] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 8630.605860] usb usb1: root hub lost power or was reset [ 8630.609749] ehci_hcd 0000:00:1a.7: debug port 1 [ 8630.609755] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 8630.609765] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8630.609771] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8630.609797] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8630.609832] usb usb5: root hub lost power or was reset [ 8630.609848] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8630.609882] usb usb6: root hub lost power or was reset [ 8630.609898] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8630.609932] usb usb7: root hub lost power or was reset [ 8630.609949] ehci_hcd 0000:00:1d.7: PME# disabled [ 8630.609953] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 8630.609957] usb usb2: root hub lost power or was reset [ 8630.613838] ehci_hcd 0000:00:1d.7: debug port 1 [ 8630.613844] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 8630.613854] pci 0000:00:1e.0: setting latency timer to 64 [ 8630.613861] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 8630.613866] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 8630.614775] ahci 0000:00:1f.2: setting latency timer to 64 [ 8630.802202] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 8630.802206] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [ 8630.841794] ata4.00: configured for UDMA/33 [ 8630.970132] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8630.970187] ata2: SATA link down (SStatus 0 SControl 300) [ 8630.970240] ata3: SATA link down (SStatus 0 SControl 300) [ 8630.979858] ata1.00: _GTF unexpected object type 0x1 [ 8630.989680] ata1.00: _GTF unexpected object type 0x1 [ 8630.989783] ata1.00: configured for UDMA/133 [ 8631.074801] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f3200000-f32007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 8631.080820] sdhci-pci 0000:0a:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8631.080823] sdhci-pci 0000:0a:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 8631.081847] pci 0000:0a:09.3: PME# disabled [ 8631.081852] pci 0000:0a:09.4: PME# disabled [ 8631.494953] sd 0:0:0:0: [sda] Starting disk [ 8631.524562] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen [ 8631.524566] ata1.00: irq_stat 0x00400001, PHY RDY changed [ 8631.524570] ata1: SError: { PHYRdyChg CommWake } [ 8631.524579] ata1.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 [ 8631.524581] res 50/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 8631.524584] ata1.00: status: { DRDY } [ 8631.524590] ata1: hard resetting link [ 8632.270235] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8632.279949] ata1.00: _GTF unexpected object type 0x1 [ 8632.289805] ata1.00: _GTF unexpected object type 0x1 [ 8632.289918] ata1.00: configured for UDMA/133 [ 8632.289927] ata1: EH complete [ 8632.314990] PM: Image restored successfully. [ 8632.349411] Restarting tasks ... done. [ 8632.349855] PM: Basic memory bitmaps freed [ 8656.690256] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 8663.750527] Registered led device: iwl-phy0::radio [ 8663.750627] Registered led device: iwl-phy0::assoc [ 8663.750678] Registered led device: iwl-phy0::RX [ 8663.750716] Registered led device: iwl-phy0::TX [ 8663.801971] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8663.804084] tg3 0000:08:00.0: PME# disabled [ 8663.804379] tg3 0000:08:00.0: irq 30 for MSI/MSI-X [ 8664.020958] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8665.770750] tg3: eth0: Link is up at 100 Mbps, half duplex. [ 8665.770758] tg3: eth0: Flow control is on for TX and on for RX. [ 8665.771861] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8667.949096] tg3: eth0: Link is down. [ 8669.890640] tg3: eth0: Link is up at 100 Mbps, half duplex. [ 8669.890648] tg3: eth0: Flow control is on for TX and on for RX. [ 8672.472843] tg3: eth0: Link is down. [ 8674.484376] tg3: eth0: Link is up at 100 Mbps, half duplex. [ 8674.484383] tg3: eth0: Flow control is on for TX and on for RX. [ 8676.290059] eth0: no IPv6 routers present [ 8839.706699] tg3: eth0: Link is down. [ 8841.628744] tg3: eth0: Link is up at 100 Mbps, half duplex. [ 8841.628752] tg3: eth0: Flow control is on for TX and on for RX. [ 8842.125880] tg3: eth0: Link is down. [ 8845.199823] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 8845.199827] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 8845.199834] PM: Marking nosave pages: 00000000bfed0000 - 0000000100000000 [ 8845.200970] PM: Basic memory bitmaps created [ 8845.200972] PM: Syncing filesystems ... done. [ 8845.202209] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 8845.203344] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 8845.203410] PM: Shrinking memory... -\|/done (20392 pages freed) [ 8846.224452] PM: Freed 81568 kbytes in 1.02 seconds (79.96 MB/s) [ 8846.224455] Suspending console(s) (use no_console_suspend to debug) [ 8846.290258] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 8846.291062] ACPI handle has no context! [ 8846.292137] ACPI handle has no context! [ 8846.292143] sdhci-pci 0000:0a:09.1: PME# disabled [ 8846.292150] sdhci-pci 0000:0a:09.1: PCI INT B disabled [ 8846.292157] ACPI handle has no context! [ 8846.315278] ACPI handle has no context! [ 8846.450432] ata_piix 0000:00:1f.1: PCI INT A disabled [ 8846.450465] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 8846.470426] ricoh-mmc: Suspending. [ 8846.470436] ricoh-mmc: Controller is now re-enabled. [ 8846.471600] ACPI: Preparing to enter system sleep state S4 [ 8846.770090] PM: Saving platform NVS memory [ 8846.771123] Disabling non-boot CPUs ... [ 8846.880019] CPU 1 is now offline [ 8846.880022] SMP alternatives: switching to UP code [ 8846.888308] CPU0 attaching NULL sched-domain. [ 8846.888312] CPU1 attaching NULL sched-domain. [ 8846.888322] CPU0 attaching NULL sched-domain. [ 8846.888522] CPU1 is down [ 8846.888574] Extended CMOS year: 2000 [ 8846.888661] PM: Creating hibernation image: [ 8846.890007] PM: Need to copy 127680 pages [ 8846.890007] PM: Normal pages needed: 127680 + 1024 + 88, available pages: 920489 [ 8846.890007] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 8846.890007] PM: Restoring platform NVS memory [ 8846.890007] CPU0: Thermal monitoring handled by SMI [ 8846.890007] Extended CMOS year: 2000 [ 8846.890007] Enabling non-boot CPUs ... [ 8846.890007] SMP alternatives: switching to SMP code [ 8846.894401] Booting processor 1 APIC 0x1 ip 0x6000 [ 8846.888147] Initializing CPU#1 [ 8846.888147] Calibrating delay using timer specific routine.. 4800.21 BogoMIPS (lpj=24001092) [ 8846.888147] CPU: L1 I cache: 32K, L1 D cache: 32K [ 8846.888147] CPU: L2 cache: 3072K [ 8846.888147] CPU 1/0x1 -> Node 0 [ 8846.888147] CPU: Physical Processor ID: 0 [ 8846.888147] CPU: Processor Core ID: 1 [ 8846.888147] mce: CPU supports 6 MCE banks [ 8846.888147] CPU1: Thermal monitoring enabled (TM2) [ 8846.888147] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 8847.051409] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 8847.053330] Switched to high resolution mode on CPU 1 [ 8847.053415] CPU0 attaching NULL sched-domain. [ 8847.090019] CPU0 attaching sched-domain: [ 8847.090022] domain 0: span 0-1 level MC [ 8847.090024] groups: 0 1 [ 8847.090027] CPU1 attaching sched-domain: [ 8847.090028] domain 0: span 0-1 level MC [ 8847.090030] groups: 1 0 [ 8847.092516] CPU1 is up [ 8847.092546] ACPI: Waking up from system sleep state S4 [ 8847.990207] ehci_hcd 0000:00:1a.7: PME# disabled [ 8847.990245] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 8847.990576] ehci_hcd 0000:00:1d.7: PME# disabled [ 8847.990683] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800005) [ 8847.990724] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 8847.990810] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [ 8847.991017] iwl3945 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [ 8847.991252] tg3 0000:08:00.0: restoring config space at offset 0xc (was 0x0, writing 0xcb3e0000) [ 8848.010043] ohci1394 0000:0a:09.0: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 8848.010049] ohci1394 0000:0a:09.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 8848.010133] ricoh-mmc: Resuming. [ 8848.010142] ricoh-mmc: Controller is now disabled. [ 8848.196039] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 8848.196078] usb usb3: root hub lost power or was reset [ 8848.196095] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 8848.196129] usb usb4: root hub lost power or was reset [ 8848.196146] ehci_hcd 0000:00:1a.7: PME# disabled [ 8848.196150] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 8848.196155] usb usb1: root hub lost power or was reset [ 8848.200052] ehci_hcd 0000:00:1a.7: debug port 1 [ 8848.200057] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 8848.200068] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8848.200074] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8848.200102] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8848.200137] usb usb5: root hub lost power or was reset [ 8848.200154] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8848.200194] usb usb6: root hub lost power or was reset [ 8848.200210] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 8848.200245] usb usb7: root hub lost power or was reset [ 8848.200262] ehci_hcd 0000:00:1d.7: PME# disabled [ 8848.200267] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 8848.200271] usb usb2: root hub lost power or was reset [ 8848.204163] ehci_hcd 0000:00:1d.7: debug port 1 [ 8848.204169] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 8848.204178] pci 0000:00:1e.0: setting latency timer to 64 [ 8848.204186] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 8848.204190] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 8848.204206] ahci 0000:00:1f.2: setting latency timer to 64 [ 8848.394152] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 8848.394155] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [ 8848.434331] ata4.00: configured for UDMA/33 [ 8848.562628] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8848.562686] ata3: SATA link down (SStatus 0 SControl 300) [ 8848.572338] ata1.00: _GTF unexpected object type 0x1 [ 8848.582136] ata1.00: _GTF unexpected object type 0x1 [ 8848.582240] ata1.00: configured for UDMA/133 [ 8848.662243] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f3200000-f32007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 8848.668326] sdhci-pci 0000:0a:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8848.668329] sdhci-pci 0000:0a:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 8848.669353] pci 0000:0a:09.3: PME# disabled [ 8848.669357] pci 0000:0a:09.4: PME# disabled [ 8848.723308] ata2: SATA link down (SStatus 0 SControl 300) [ 8849.071829] sd 0:0:0:0: [sda] Starting disk [ 8849.094252] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen [ 8849.094255] ata1.00: irq_stat 0x00400001, PHY RDY changed [ 8849.094260] ata1: SError: { PHYRdyChg CommWake } [ 8849.094268] ata1.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 [ 8849.094270] res 50/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 8849.094273] ata1.00: status: { DRDY } [ 8849.094279] ata1: hard resetting link [ 8849.840231] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8849.849948] ata1.00: _GTF unexpected object type 0x1 [ 8849.859769] ata1.00: _GTF unexpected object type 0x1 [ 8849.859879] ata1.00: configured for UDMA/133 [ 8849.859889] ata1: EH complete [ 8849.884425] PM: Image restored successfully. [ 8849.918466] Restarting tasks ... done. [ 8849.936320] PM: Basic memory bitmaps freed [ 8852.672554] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 8854.090612] Registered led device: iwl-phy0::radio [ 8854.090709] Registered led device: iwl-phy0::assoc [ 8854.090751] Registered led device: iwl-phy0::RX [ 8854.090792] Registered led device: iwl-phy0::TX [ 8854.151802] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 8854.152828] tg3 0000:08:00.0: PME# disabled [ 8854.153095] tg3 0000:08:00.0: irq 30 for MSI/MSI-X [ 8854.366377] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8856.104326] tg3: eth0: Link is up at 100 Mbps, half duplex. [ 8856.104330] tg3: eth0: Flow control is on for TX and on for RX. [ 8856.104876] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8866.920231] eth0: no IPv6 routers present [ 9026.640097] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9026.640110] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 9026.640120] ILI [ 9026.640124] sr 3:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 9026.640137] end_request: I/O error, dev sr0, sector 0 [ 9026.640147] Buffer I/O error on device sr0, logical block 0 [ 9026.640162] Buffer I/O error on device sr0, logical block 1 [ 9026.640169] Buffer I/O error on device sr0, logical block 2 [ 9026.640175] Buffer I/O error on device sr0, logical block 3 [ 9026.640181] Buffer I/O error on device sr0, logical block 4 [ 9026.640187] Buffer I/O error on device sr0, logical block 5 [ 9026.640194] Buffer I/O error on device sr0, logical block 6 [ 9026.640200] Buffer I/O error on device sr0, logical block 7 [ 9026.640206] Buffer I/O error on device sr0, logical block 8 [ 9026.642831] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9026.642844] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 9026.642854] ILI [ 9026.642858] sr 3:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 9026.642871] end_request: I/O error, dev sr0, sector 0 [ 9026.710783] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9026.710796] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 9026.710806] ILI [ 9026.710810] sr 3:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 9026.710823] end_request: I/O error, dev sr0, sector 0 [ 9026.713155] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9026.713166] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 9026.713175] ILI [ 9026.713179] sr 3:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 9026.713191] end_request: I/O error, dev sr0, sector 0 [ 9026.715700] sr 3:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 9026.715711] sr 3:0:0:0: [sr0] Sense Key : Illegal Request [current] [ 9026.715720] ILI [ 9026.715723] sr 3:0:0:0: [sr0] Add. Sense: Illegal mode for this track [ 9026.715736] end_request: I/O error, dev sr0, sector 0 [ 9108.207515] tg3: eth0: Link is down. [ 9113.009619] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [ 9113.009624] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [ 9113.009630] PM: Marking nosave pages: 00000000bfed0000 - 0000000100000000 [ 9113.010772] PM: Basic memory bitmaps created [ 9113.010774] PM: Syncing filesystems ... done. [ 9113.013491] Freezing user space processes ... (elapsed 0.00 seconds) done. [ 9113.014546] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 9113.014616] PM: Shrinking memory... -\|/-\|/-\|/-done (114833 pages freed) [ 9118.321283] PM: Freed 459332 kbytes in 5.30 seconds (86.66 MB/s) [ 9118.321287] Suspending console(s) (use no_console_suspend to debug) [ 9118.590300] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 9118.645562] ACPI handle has no context! [ 9118.646638] ACPI handle has no context! [ 9118.646645] sdhci-pci 0000:0a:09.1: PME# disabled [ 9118.646652] sdhci-pci 0000:0a:09.1: PCI INT B disabled [ 9118.646659] ACPI handle has no context! [ 9118.665273] ACPI handle has no context! [ 9118.800616] ata_piix 0000:00:1f.1: PCI INT A disabled [ 9118.800650] HDA Intel 0000:00:1b.0: PCI INT A disabled [ 9118.820420] ricoh-mmc: Suspending. [ 9118.820431] ricoh-mmc: Controller is now re-enabled. [ 9118.821595] ACPI: Preparing to enter system sleep state S4 [ 9119.120087] PM: Saving platform NVS memory [ 9119.121083] Disabling non-boot CPUs ... [ 9119.230017] CPU 1 is now offline [ 9119.230021] SMP alternatives: switching to UP code [ 9119.238394] CPU0 attaching NULL sched-domain. [ 9119.238398] CPU1 attaching NULL sched-domain. [ 9119.238408] CPU0 attaching NULL sched-domain. [ 9119.238603] CPU1 is down [ 9119.238653] Extended CMOS year: 2000 [ 9119.238741] PM: Creating hibernation image: [ 9119.240007] PM: Need to copy 127390 pages [ 9119.240007] PM: Normal pages needed: 127390 + 1024 + 88, available pages: 920779 [ 9119.240007] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 9119.240007] PM: Restoring platform NVS memory [ 9119.240007] CPU0: Thermal monitoring handled by SMI [ 9119.240007] Extended CMOS year: 2000 [ 9119.240007] Enabling non-boot CPUs ... [ 9119.240007] SMP alternatives: switching to SMP code [ 9119.244578] Booting processor 1 APIC 0x1 ip 0x6000 [ 9119.238227] Initializing CPU#1 [ 9119.238227] Calibrating delay using timer specific routine.. 4800.13 BogoMIPS (lpj=24000669) [ 9119.238227] CPU: L1 I cache: 32K, L1 D cache: 32K [ 9119.238227] CPU: L2 cache: 3072K [ 9119.238227] CPU 1/0x1 -> Node 0 [ 9119.238227] CPU: Physical Processor ID: 0 [ 9119.238227] CPU: Processor Core ID: 1 [ 9119.238227] mce: CPU supports 6 MCE banks [ 9119.238227] CPU1: Thermal monitoring enabled (TM2) [ 9119.238227] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 9119.401488] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [ 9119.401554] CPU0 attaching NULL sched-domain. [ 9119.402515] Switched to high resolution mode on CPU 1 [ 9119.440022] CPU0 attaching sched-domain: [ 9119.440024] domain 0: span 0-1 level MC [ 9119.440026] groups: 0 1 [ 9119.440029] CPU1 attaching sched-domain: [ 9119.440031] domain 0: span 0-1 level MC [ 9119.440033] groups: 1 0 [ 9119.442515] CPU1 is up [ 9119.442544] ACPI: Waking up from system sleep state S4 [ 9120.340206] ehci_hcd 0000:00:1a.7: PME# disabled [ 9120.340245] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [ 9120.340576] ehci_hcd 0000:00:1d.7: PME# disabled [ 9120.340681] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800005) [ 9120.340722] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [ 9120.340809] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [ 9120.341016] iwl3945 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [ 9120.341252] tg3 0000:08:00.0: restoring config space at offset 0xc (was 0x0, writing 0xcb3e0000) [ 9120.360039] ohci1394 0000:0a:09.0: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [ 9120.360045] ohci1394 0000:0a:09.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [ 9120.360129] ricoh-mmc: Resuming. [ 9120.360138] ricoh-mmc: Controller is now disabled. [ 9120.545632] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 9120.545678] usb usb3: root hub lost power or was reset [ 9120.545696] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 9120.545730] usb usb4: root hub lost power or was reset [ 9120.545747] ehci_hcd 0000:00:1a.7: PME# disabled [ 9120.545751] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 9120.545755] usb usb1: root hub lost power or was reset [ 9120.549633] ehci_hcd 0000:00:1a.7: debug port 1 [ 9120.549639] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 9120.549649] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 9120.549655] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 9120.549682] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 9120.549716] usb usb5: root hub lost power or was reset [ 9120.549732] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 9120.549767] usb usb6: root hub lost power or was reset [ 9120.549783] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 9120.549818] usb usb7: root hub lost power or was reset [ 9120.549835] ehci_hcd 0000:00:1d.7: PME# disabled [ 9120.549839] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 9120.549843] usb usb2: root hub lost power or was reset [ 9120.553722] ehci_hcd 0000:00:1d.7: debug port 1 [ 9120.553727] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 9120.553737] pci 0000:00:1e.0: setting latency timer to 64 [ 9120.553745] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 9120.553749] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 9120.554662] ahci 0000:00:1f.2: setting latency timer to 64 [ 9120.741860] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 9120.741864] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [ 9120.781478] ata4.00: configured for UDMA/33 [ 9120.910165] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9120.910254] ata2: SATA link down (SStatus 0 SControl 300) [ 9120.910355] ata3: SATA link down (SStatus 0 SControl 300) [ 9120.919876] ata1.00: _GTF unexpected object type 0x1 [ 9120.929670] ata1.00: _GTF unexpected object type 0x1 [ 9120.929788] ata1.00: configured for UDMA/133 [ 9121.014811] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f3200000-f32007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 9121.020829] sdhci-pci 0000:0a:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 9121.020832] sdhci-pci 0000:0a:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 9121.021856] pci 0000:0a:09.3: PME# disabled [ 9121.021861] pci 0000:0a:09.4: PME# disabled [ 9121.434381] sd 0:0:0:0: [sda] Starting disk [ 9121.456328] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen [ 9121.456332] ata1.00: irq_stat 0x00400001, PHY RDY changed [ 9121.456337] ata1: SError: { PHYRdyChg CommWake } [ 9121.456345] ata1.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 [ 9121.456347] res 50/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 9121.456350] ata1.00: status: { DRDY } [ 9121.456356] ata1: hard resetting link [ 9122.200232] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9122.209940] ata1.00: _GTF unexpected object type 0x1 [ 9122.219795] ata1.00: _GTF unexpected object type 0x1 [ 9122.219904] ata1.00: configured for UDMA/133 [ 9122.219913] ata1: EH complete [ 9122.246753] PM: Image restored successfully. [ 9122.281196] Restarting tasks ... done. [ 9122.281666] PM: Basic memory bitmaps freed [ 9138.120145] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 9147.980309] Registered led device: iwl-phy0::radio [ 9147.980409] Registered led device: iwl-phy0::assoc [ 9147.980455] Registered led device: iwl-phy0::RX [ 9147.980493] Registered led device: iwl-phy0::TX [ 9148.032424] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9148.033266] tg3 0000:08:00.0: PME# disabled [ 9148.033525] tg3 0000:08:00.0: irq 30 for MSI/MSI-X [ 9148.248463] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9149.987691] tg3: eth0: Link is up at 100 Mbps, half duplex. [ 9149.987699] tg3: eth0: Flow control is on for TX and on for RX. [ 9149.988754] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9160.760051] eth0: no IPv6 routers present [11405.940274] __ratelimit: 30 callbacks suppressed [11405.940281] ACPI: EC: missing confirmations, switch off interrupt mode. [13588.925924] tg3: eth0: Link is down. [13592.259442] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [13592.259445] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [13592.259449] PM: Marking nosave pages: 00000000bfed0000 - 0000000100000000 [13592.260162] PM: Basic memory bitmaps created [13592.260163] PM: Syncing filesystems ... done. [13592.262787] Freezing user space processes ... (elapsed 0.00 seconds) done. [13592.263779] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [13592.263840] PM: Shrinking memory... -\|/-\|/-\|/-\done (132088 pages freed) [13597.819005] PM: Freed 528352 kbytes in 5.55 seconds (95.19 MB/s) [13597.819007] Suspending console(s) (use no_console_suspend to debug) [13598.300214] sd 0:0:0:0: [sda] Synchronizing SCSI cache [13598.300457] ACPI handle has no context! [13598.301524] ACPI handle has no context! [13598.301529] sdhci-pci 0000:0a:09.1: PME# disabled [13598.301535] sdhci-pci 0000:0a:09.1: PCI INT B disabled [13598.301541] ACPI handle has no context! [13598.325264] ACPI handle has no context! [13598.450492] ata_piix 0000:00:1f.1: PCI INT A disabled [13598.450521] HDA Intel 0000:00:1b.0: PCI INT A disabled [13598.470432] ricoh-mmc: Suspending. [13598.470440] ricoh-mmc: Controller is now re-enabled. [13598.471315] ACPI: Preparing to enter system sleep state S4 [13598.770072] PM: Saving platform NVS memory [13598.770972] Disabling non-boot CPUs ... [13598.880014] CPU 1 is now offline [13598.880017] SMP alternatives: switching to UP code [13598.885856] CPU0 attaching NULL sched-domain. [13598.885858] CPU1 attaching NULL sched-domain. [13598.885867] CPU0 attaching NULL sched-domain. [13598.886025] CPU1 is down [13598.886066] Extended CMOS year: 2000 [13598.886151] PM: Creating hibernation image: [13598.890006] PM: Need to copy 126990 pages [13598.890006] PM: Normal pages needed: 126990 + 1024 + 88, available pages: 921176 [13598.890006] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [13598.890006] PM: Restoring platform NVS memory [13598.890006] CPU0: Thermal monitoring handled by SMI [13598.890006] Extended CMOS year: 2000 [13598.890006] Enabling non-boot CPUs ... [13598.890006] SMP alternatives: switching to SMP code [13598.891945] Booting processor 1 APIC 0x1 ip 0x6000 [13598.885692] Initializing CPU#1 [13598.885692] Calibrating delay using timer specific routine.. 4800.32 BogoMIPS (lpj=24001624) [13598.885692] CPU: L1 I cache: 32K, L1 D cache: 32K [13598.885692] CPU: L2 cache: 3072K [13598.885692] CPU 1/0x1 -> Node 0 [13598.885692] CPU: Physical Processor ID: 0 [13598.885692] CPU: Processor Core ID: 1 [13598.885692] mce: CPU supports 6 MCE banks [13598.885692] CPU1: Thermal monitoring enabled (TM2) [13598.885692] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [13599.051449] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [13599.053370] Switched to high resolution mode on CPU 1 [13599.053511] CPU0 attaching NULL sched-domain. [13599.090021] CPU0 attaching sched-domain: [13599.090023] domain 0: span 0-1 level MC [13599.090025] groups: 0 1 [13599.090029] CPU1 attaching sched-domain: [13599.090030] domain 0: span 0-1 level MC [13599.090032] groups: 1 0 [13599.092515] CPU1 is up [13599.092544] ACPI: Waking up from system sleep state S4 [13599.990205] ehci_hcd 0000:00:1a.7: PME# disabled [13599.990243] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [13599.990574] ehci_hcd 0000:00:1d.7: PME# disabled [13599.990680] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800005) [13599.990721] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [13599.990808] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [13599.991014] iwl3945 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [13599.991250] tg3 0000:08:00.0: restoring config space at offset 0xc (was 0x0, writing 0xcb3e0000) [13600.010040] ohci1394 0000:0a:09.0: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [13600.010046] ohci1394 0000:0a:09.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [13600.010131] ricoh-mmc: Resuming. [13600.010139] ricoh-mmc: Controller is now disabled. [13600.195746] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [13600.195793] usb usb3: root hub lost power or was reset [13600.195810] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [13600.195844] usb usb4: root hub lost power or was reset [13600.195861] ehci_hcd 0000:00:1a.7: PME# disabled [13600.195865] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [13600.195870] usb usb1: root hub lost power or was reset [13600.199748] ehci_hcd 0000:00:1a.7: debug port 1 [13600.199754] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [13600.199765] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [13600.199770] HDA Intel 0000:00:1b.0: setting latency timer to 64 [13600.199797] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [13600.199831] usb usb5: root hub lost power or was reset [13600.199848] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [13600.199882] usb usb6: root hub lost power or was reset [13600.199898] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [13600.199933] usb usb7: root hub lost power or was reset [13600.199950] ehci_hcd 0000:00:1d.7: PME# disabled [13600.199954] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [13600.199958] usb usb2: root hub lost power or was reset [13600.203838] ehci_hcd 0000:00:1d.7: debug port 1 [13600.203843] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [13600.203853] pci 0000:00:1e.0: setting latency timer to 64 [13600.203861] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [13600.203865] ata_piix 0000:00:1f.1: setting latency timer to 64 [13600.204781] ahci 0000:00:1f.2: setting latency timer to 64 [13600.392097] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [13600.392100] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [13600.431266] ata4.00: configured for UDMA/33 [13600.560133] ata3: SATA link down (SStatus 0 SControl 300) [13600.560225] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [13600.560302] ata2: SATA link down (SStatus 0 SControl 300) [13600.569926] ata1.00: _GTF unexpected object type 0x1 [13600.579754] ata1.00: _GTF unexpected object type 0x1 [13600.579836] ata1.00: configured for UDMA/133 [13600.674801] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f3200000-f32007ff] Max Packet=[2048] IR/IT contexts=[4/4] [13600.680819] sdhci-pci 0000:0a:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [13600.680822] sdhci-pci 0000:0a:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [13600.681846] pci 0000:0a:09.3: PME# disabled [13600.681851] pci 0000:0a:09.4: PME# disabled [13601.095110] sd 0:0:0:0: [sda] Starting disk [13601.118718] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen [13601.118722] ata1.00: irq_stat 0x00400001, PHY RDY changed [13601.118727] ata1: SError: { PHYRdyChg CommWake } [13601.118735] ata1.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 [13601.118737] res 50/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [13601.118740] ata1.00: status: { DRDY } [13601.118746] ata1: hard resetting link [13601.860234] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [13601.869942] ata1.00: _GTF unexpected object type 0x1 [13601.879801] ata1.00: _GTF unexpected object type 0x1 [13601.879911] ata1.00: configured for UDMA/133 [13601.879920] ata1: EH complete [13601.909104] PM: Image restored successfully. [13601.943384] Restarting tasks ... done. [13601.943864] PM: Basic memory bitmaps freed [13617.670242] ACPI: EC: missing confirmations, switch off interrupt mode. [13619.990097] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [13634.791219] Registered led device: iwl-phy0::radio [13634.791236] Registered led device: iwl-phy0::assoc [13634.791291] Registered led device: iwl-phy0::RX [13634.791305] Registered led device: iwl-phy0::TX [13634.851159] ADDRCONF(NETDEV_UP): wlan0: link is not ready [13635.055614] tg3 0000:08:00.0: PME# disabled [13635.055911] tg3 0000:08:00.0: irq 30 for MSI/MSI-X [13635.270627] ADDRCONF(NETDEV_UP): eth0: link is not ready [13708.735212] tg3: eth0: Link is up at 100 Mbps, half duplex. [13708.735220] tg3: eth0: Flow control is on for TX and on for RX. [13708.736295] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [13719.150260] eth0: no IPv6 routers present [16038.850215] iwl3945 0000:06:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x040003DD [21011.908375] tg3: eth0: Link is down. [21015.891237] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [21015.891240] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [21015.891244] PM: Marking nosave pages: 00000000bfed0000 - 0000000100000000 [21015.891932] PM: Basic memory bitmaps created [21015.891933] PM: Syncing filesystems ... done. [21015.899456] Freezing user space processes ... (elapsed 0.01 seconds) done. [21015.911564] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [21015.911632] PM: Shrinking memory... -\|/-\|/-\|/-\|/done (184053 pages freed) [21022.023025] PM: Freed 736212 kbytes in 6.11 seconds (120.49 MB/s) [21022.023028] Suspending console(s) (use no_console_suspend to debug) [21022.300034] sd 0:0:0:0: [sda] Synchronizing SCSI cache [21022.347419] ACPI handle has no context! [21022.348490] ACPI handle has no context! [21022.348495] sdhci-pci 0000:0a:09.1: PME# disabled [21022.348501] sdhci-pci 0000:0a:09.1: PCI INT B disabled [21022.348507] ACPI handle has no context! [21022.365212] ACPI handle has no context! [21022.490434] ata_piix 0000:00:1f.1: PCI INT A disabled [21022.490462] HDA Intel 0000:00:1b.0: PCI INT A disabled [21022.510433] ricoh-mmc: Suspending. [21022.510442] ricoh-mmc: Controller is now re-enabled. [21022.511321] ACPI: Preparing to enter system sleep state S4 [21022.810070] PM: Saving platform NVS memory [21022.810974] Disabling non-boot CPUs ... [21022.920014] CPU 1 is now offline [21022.920016] SMP alternatives: switching to UP code [21022.925811] CPU0 attaching NULL sched-domain. [21022.925813] CPU1 attaching NULL sched-domain. [21022.925821] CPU0 attaching NULL sched-domain. [21022.925974] CPU1 is down [21022.926015] Extended CMOS year: 2000 [21022.926100] PM: Creating hibernation image: [21022.930006] PM: Need to copy 126363 pages [21022.930006] PM: Normal pages needed: 126363 + 1024 + 88, available pages: 921806 [21022.930006] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [21022.930006] PM: Restoring platform NVS memory [21022.930006] CPU0: Thermal monitoring handled by SMI [21022.930006] Extended CMOS year: 2000 [21022.930006] Enabling non-boot CPUs ... [21022.930006] SMP alternatives: switching to SMP code [21022.931852] Booting processor 1 APIC 0x1 ip 0x6000 [21022.925648] Initializing CPU#1 [21022.925648] Calibrating delay using timer specific routine.. 4800.61 BogoMIPS (lpj=24003050) [21022.925648] CPU: L1 I cache: 32K, L1 D cache: 32K [21022.925648] CPU: L2 cache: 3072K [21022.925648] CPU 1/0x1 -> Node 0 [21022.925648] CPU: Physical Processor ID: 0 [21022.925648] CPU: Processor Core ID: 1 [21022.925648] mce: CPU supports 6 MCE banks [21022.925648] CPU1: Thermal monitoring enabled (TM2) [21022.925648] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [21023.091461] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [21023.093383] Switched to high resolution mode on CPU 1 [21023.093545] CPU0 attaching NULL sched-domain. [21023.130020] CPU0 attaching sched-domain: [21023.130023] domain 0: span 0-1 level MC [21023.130024] groups: 0 1 [21023.130028] CPU1 attaching sched-domain: [21023.130029] domain 0: span 0-1 level MC [21023.130031] groups: 1 0 [21023.132515] CPU1 is up [21023.132545] ACPI: Waking up from system sleep state S4 [21024.030205] ehci_hcd 0000:00:1a.7: PME# disabled [21024.030243] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [21024.030574] ehci_hcd 0000:00:1d.7: PME# disabled [21024.030680] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800005) [21024.030721] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [21024.030808] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [21024.031015] iwl3945 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [21024.031252] tg3 0000:08:00.0: restoring config space at offset 0xc (was 0x0, writing 0xcb3e0000) [21024.050042] ohci1394 0000:0a:09.0: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [21024.050048] ohci1394 0000:0a:09.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [21024.050132] ricoh-mmc: Resuming. [21024.050141] ricoh-mmc: Controller is now disabled. [21024.235768] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [21024.235804] usb usb3: root hub lost power or was reset [21024.235821] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [21024.235855] usb usb4: root hub lost power or was reset [21024.235872] ehci_hcd 0000:00:1a.7: PME# disabled [21024.235876] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [21024.235881] usb usb1: root hub lost power or was reset [21024.239775] ehci_hcd 0000:00:1a.7: debug port 1 [21024.239781] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [21024.239791] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [21024.239797] HDA Intel 0000:00:1b.0: setting latency timer to 64 [21024.239823] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [21024.239858] usb usb5: root hub lost power or was reset [21024.239874] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [21024.239909] usb usb6: root hub lost power or was reset [21024.239925] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [21024.239959] usb usb7: root hub lost power or was reset [21024.239976] ehci_hcd 0000:00:1d.7: PME# disabled [21024.239980] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [21024.239984] usb usb2: root hub lost power or was reset [21024.243863] ehci_hcd 0000:00:1d.7: debug port 1 [21024.243869] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [21024.243879] pci 0000:00:1e.0: setting latency timer to 64 [21024.243886] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [21024.243891] ata_piix 0000:00:1f.1: setting latency timer to 64 [21024.244803] ahci 0000:00:1f.2: setting latency timer to 64 [21024.432079] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [21024.432082] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [21024.471607] ata4.00: configured for UDMA/33 [21024.600169] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [21024.600261] ata2: SATA link down (SStatus 0 SControl 300) [21024.600359] ata3: SATA link down (SStatus 0 SControl 300) [21024.609880] ata1.00: _GTF unexpected object type 0x1 [21024.619667] ata1.00: _GTF unexpected object type 0x1 [21024.619786] ata1.00: configured for UDMA/133 [21024.704801] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f3200000-f32007ff] Max Packet=[2048] IR/IT contexts=[4/4] [21024.710821] sdhci-pci 0000:0a:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [21024.710823] sdhci-pci 0000:0a:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [21024.711848] pci 0000:0a:09.3: PME# disabled [21024.711853] pci 0000:0a:09.4: PME# disabled [21025.124954] sd 0:0:0:0: [sda] Starting disk [21025.154483] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen [21025.154488] ata1.00: irq_stat 0x00400001, PHY RDY changed [21025.154492] ata1: SError: { PHYRdyChg CommWake } [21025.154501] ata1.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 [21025.154502] res 50/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [21025.154506] ata1.00: status: { DRDY } [21025.154511] ata1: hard resetting link [21025.900233] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [21025.909940] ata1.00: _GTF unexpected object type 0x1 [21025.919821] ata1.00: _GTF unexpected object type 0x1 [21025.919931] ata1.00: configured for UDMA/133 [21025.919940] ata1: EH complete [21025.944909] PM: Image restored successfully. [21025.978961] Restarting tasks ... done. [21025.979424] PM: Basic memory bitmaps freed [21037.970087] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [21043.967983] tg3 0000:08:00.0: PME# disabled [21043.968280] tg3 0000:08:00.0: irq 30 for MSI/MSI-X [21044.192073] ADDRCONF(NETDEV_UP): eth0: link is not ready [21045.911237] tg3: eth0: Link is up at 100 Mbps, half duplex. [21045.911245] tg3: eth0: Flow control is on for TX and on for RX. [21045.912308] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [21055.950221] eth0: no IPv6 routers present [22738.045761] tg3: eth0: Link is down. [22741.652892] PM: Marking nosave pages: 0000000000001000 - 0000000000006000 [22741.652895] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [22741.652899] PM: Marking nosave pages: 00000000bfed0000 - 0000000100000000 [22741.653600] PM: Basic memory bitmaps created [22741.653601] PM: Syncing filesystems ... done. [22741.655446] Freezing user space processes ... (elapsed 0.00 seconds) done. [22741.656393] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [22741.656454] PM: Shrinking memory... -\|/-\|/done (72281 pages freed) [22743.693731] PM: Freed 289124 kbytes in 2.03 seconds (142.42 MB/s) [22743.693733] Suspending console(s) (use no_console_suspend to debug) [22743.760253] sd 0:0:0:0: [sda] Synchronizing SCSI cache [22743.760477] ACPI handle has no context! [22743.761544] ACPI handle has no context! [22743.761549] sdhci-pci 0000:0a:09.1: PME# disabled [22743.761555] sdhci-pci 0000:0a:09.1: PCI INT B disabled [22743.761560] ACPI handle has no context! [22743.785273] ACPI handle has no context! [22743.810016] iwl3945 0000:06:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [22743.810016] iwl3945 0000:06:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [22743.810016] iwl3945 0000:06:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [22743.810016] iwl3945 0000:06:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [22743.810016] iwl3945 0000:06:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [22743.810016] iwl3945 0000:06:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [22743.810016] iwl3945 0000:06:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [22743.810016] iwl3945 0000:06:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [22743.810016] iwl3945 0000:06:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [22743.810016] iwl3945 0000:06:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0x000003C8 [22744.039959] iwl3945 0000:06:00.0: Microcode HW error detected. Restarting. [22744.150435] ata_piix 0000:00:1f.1: PCI INT A disabled [22744.150463] HDA Intel 0000:00:1b.0: PCI INT A disabled [22744.170439] ricoh-mmc: Suspending. [22744.170448] ricoh-mmc: Controller is now re-enabled. [22744.171324] ACPI: Preparing to enter system sleep state S4 [22744.470069] PM: Saving platform NVS memory [22744.471004] Disabling non-boot CPUs ... [22744.580019] CPU 1 is now offline [22744.580021] SMP alternatives: switching to UP code [22744.585831] CPU0 attaching NULL sched-domain. [22744.585834] CPU1 attaching NULL sched-domain. [22744.585842] CPU0 attaching NULL sched-domain. [22744.585998] CPU1 is down [22744.586040] Extended CMOS year: 2000 [22744.586125] PM: Creating hibernation image: [22744.590006] PM: Need to copy 118813 pages [22744.590006] PM: Normal pages needed: 118813 + 1024 + 88, available pages: 929356 [22744.590006] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [22744.590006] PM: Restoring platform NVS memory [22744.590006] CPU0: Thermal monitoring handled by SMI [22744.590006] Extended CMOS year: 2000 [22744.590006] Enabling non-boot CPUs ... [22744.590006] SMP alternatives: switching to SMP code [22744.591912] Booting processor 1 APIC 0x1 ip 0x6000 [22744.585681] Initializing CPU#1 [22744.585681] Calibrating delay using timer specific routine.. 4800.12 BogoMIPS (lpj=24000614) [22744.585681] CPU: L1 I cache: 32K, L1 D cache: 32K [22744.585681] CPU: L2 cache: 3072K [22744.585681] CPU 1/0x1 -> Node 0 [22744.585681] CPU: Physical Processor ID: 0 [22744.585681] CPU: Processor Core ID: 1 [22744.585681] mce: CPU supports 6 MCE banks [22744.585681] CPU1: Thermal monitoring enabled (TM2) [22744.585681] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [22744.751413] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 [22744.751472] CPU0 attaching NULL sched-domain. [22744.752516] Switched to high resolution mode on CPU 1 [22744.790020] CPU0 attaching sched-domain: [22744.790023] domain 0: span 0-1 level MC [22744.790024] groups: 0 1 [22744.790028] CPU1 attaching sched-domain: [22744.790029] domain 0: span 0-1 level MC [22744.790031] groups: 1 0 [22744.792516] CPU1 is up [22744.792545] ACPI: Waking up from system sleep state S4 [22745.690207] ehci_hcd 0000:00:1a.7: PME# disabled [22745.690246] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) [22745.690576] ehci_hcd 0000:00:1d.7: PME# disabled [22745.690682] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800005) [22745.690723] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407) [22745.690810] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x10, writing 0x0) [22745.691018] iwl3945 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100406) [22745.691254] tg3 0000:08:00.0: restoring config space at offset 0xc (was 0x0, writing 0xcb3e0000) [22745.710044] ohci1394 0000:0a:09.0: restoring config space at offset 0x3 (was 0x800000, writing 0x802010) [22745.710050] ohci1394 0000:0a:09.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006) [22745.710134] ricoh-mmc: Resuming. [22745.710143] ricoh-mmc: Controller is now disabled. [22745.894493] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [22745.894530] usb usb3: root hub lost power or was reset [22745.894547] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [22745.894581] usb usb4: root hub lost power or was reset [22745.894599] ehci_hcd 0000:00:1a.7: PME# disabled [22745.894603] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [22745.894608] usb usb1: root hub lost power or was reset [22745.898505] ehci_hcd 0000:00:1a.7: debug port 1 [22745.898510] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [22745.898521] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [22745.898527] HDA Intel 0000:00:1b.0: setting latency timer to 64 [22745.898554] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [22745.898589] usb usb5: root hub lost power or was reset [22745.898605] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [22745.898639] usb usb6: root hub lost power or was reset [22745.898656] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [22745.898690] usb usb7: root hub lost power or was reset [22745.898707] ehci_hcd 0000:00:1d.7: PME# disabled [22745.898711] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [22745.898716] usb usb2: root hub lost power or was reset [22745.902597] ehci_hcd 0000:00:1d.7: debug port 1 [22745.902603] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [22745.902613] pci 0000:00:1e.0: setting latency timer to 64 [22745.902621] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [22745.902625] ata_piix 0000:00:1f.1: setting latency timer to 64 [22745.902641] ahci 0000:00:1f.2: setting latency timer to 64 [22746.104451] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [22746.104454] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [22746.143998] ata4.00: configured for UDMA/33 [22746.262559] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [22746.262617] ata2: SATA link down (SStatus 0 SControl 300) [22746.272272] ata1.00: _GTF unexpected object type 0x1 [22746.282028] ata1.00: _GTF unexpected object type 0x1 [22746.282132] ata1.00: configured for UDMA/133 [22746.364802] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f3200000-f32007ff] Max Packet=[2048] IR/IT contexts=[4/4] [22746.370821] sdhci-pci 0000:0a:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [22746.370824] sdhci-pci 0000:0a:09.1: Will use DMA mode even though HW doesn't fully claim to support it. [22746.371848] pci 0000:0a:09.3: PME# disabled [22746.371853] pci 0000:0a:09.4: PME# disabled [22746.412788] ata3: SATA link down (SStatus 0 SControl 300) [22746.772676] sd 0:0:0:0: [sda] Starting disk [22746.798336] ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x50000 action 0xe frozen [22746.798341] ata1.00: irq_stat 0x00400001, PHY RDY changed [22746.798345] ata1: SError: { PHYRdyChg CommWake } [22746.798354] ata1.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 0 [22746.798355] res 50/00:01:00:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [22746.798359] ata1.00: status: { DRDY } [22746.798365] ata1: hard resetting link [22747.540231] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [22747.549954] ata1.00: _GTF unexpected object type 0x1 [22747.559819] ata1.00: _GTF unexpected object type 0x1 [22747.559928] ata1.00: configured for UDMA/133 [22747.559938] ata1: EH complete [22747.589810] PM: Image restored successfully. [22747.622486] Restarting tasks ... done. [22747.624808] PM: Basic memory bitmaps freed [22756.462571] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [22759.711281] tg3 0000:08:00.0: PME# disabled [22759.711603] tg3 0000:08:00.0: irq 30 for MSI/MSI-X [22759.925503] ADDRCONF(NETDEV_UP): eth0: link is not ready [22762.304942] tg3: eth0: Link is up at 100 Mbps, half duplex. [22762.304950] tg3: eth0: Flow control is on for TX and on for RX. [22762.307304] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [22763.286764] tg3: eth0: Link is down. [22765.229878] tg3: eth0: Link is up at 100 Mbps, half duplex. [22765.229886] tg3: eth0: Flow control is on for TX and on for RX. [22773.100067] eth0: no IPv6 routers present