[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-20-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu9) ) #57-Ubuntu SMP Mon Feb 8 09:05:19 UTC 2010 (Ubuntu 2.6.31-20.57-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff60000 (usable) [ 0.000000] BIOS-e820: 000000003ff60000 - 000000003ff77000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff77000 - 000000003ff79000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x3ff60 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DBFFF uncachable [ 0.000000] DC000-DFFFF write-back [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03FF80000 mask FFFF80000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003ff60000 (usable) [ 0.000000] modified: 000000003ff60000 - 000000003ff77000 (ACPI data) [ 0.000000] modified: 000000003ff77000 - 000000003ff79000 (ACPI NVS) [ 0.000000] modified: 000000003ff80000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 2f841000 - 2ffc7369 [ 0.000000] ACPI: RSDP 000f6d70 00024 (v02 IBM ) [ 0.000000] ACPI: XSDT 3ff6a6cd 0004C (v01 IBM TP-1R 00003190 LTP 00000000) [ 0.000000] ACPI: FACP 3ff6a800 000F4 (v03 IBM TP-1R 00003190 IBM 00000001) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 20090521 tbfadt-527 [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 20090521 tbfadt-558 [ 0.000000] ACPI: DSDT 3ff6a9e7 0C4D5 (v01 IBM TP-1R 00003190 MSFT 0100000E) [ 0.000000] ACPI: FACS 3ff78000 00040 [ 0.000000] ACPI: SSDT 3ff6a9b4 00033 (v01 IBM TP-1R 00003190 MSFT 0100000E) [ 0.000000] ACPI: ECDT 3ff76ebc 00052 (v01 IBM TP-1R 00003190 IBM 00000001) [ 0.000000] ACPI: TCPA 3ff76f0e 00032 (v01 IBM TP-1R 00003190 PTL 00000001) [ 0.000000] ACPI: BOOT 3ff76fd8 00028 (v01 IBM TP-1R 00003190 LTP 00000001) [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008ad060] TEXT DATA BSS ==> [0000100000 - 00008ad060] [ 0.000000] #4 [002f841000 - 002ffc7369] RAMDISK ==> [002f841000 - 002ffc7369] [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #6 [00008ae000 - 00008b1128] BRK ==> [00008ae000 - 00008b1128] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ff60 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ff60 [ 0.000000] On node 0 totalpages: 261883 [ 0.000000] free_area_init_node: node 0, pgdat c0788920, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 271 pages used for memmap [ 0.000000] HighMem zone: 34387 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bf800000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1805000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259836 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-20-generic root=UUID=05a9b258-d098-4a06-b1e2-91ae0446e0e1 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5239680 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ff60) [ 0.000000] Memory: 1017336k/1047936k available (4579k kernel code, 29796k reserved, 2145k data, 540k init, 138632k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0792000 - 0xc0819000 ( 540 kB) [ 0.000000] .data : 0xc0578c68 - 0xc0791448 (2145 kB) [ 0.000000] .text : 0xc0100000 - 0xc0578c68 (4579 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1698.698 MHz processor. [ 0.001489] Console: colour VGA+ 80x25 [ 0.001493] console [tty0] enabled [ 0.001544] Calibrating delay loop (skipped), value calculated using timer frequency.. 3397.39 BogoMIPS (lpj=6794792) [ 0.001566] Security Framework initialized [ 0.001592] AppArmor: AppArmor initialized [ 0.001600] Mount-cache hash table entries: 512 [ 0.001742] Initializing cgroup subsys ns [ 0.001747] Initializing cgroup subsys cpuacct [ 0.001752] Initializing cgroup subsys memory [ 0.001762] Initializing cgroup subsys freezer [ 0.001764] Initializing cgroup subsys net_cls [ 0.001782] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.001786] CPU: L2 cache: 2048K [ 0.001791] mce: CPU supports 5 MCE banks [ 0.001799] ------------[ cut here ]------------ [ 0.001810] WARNING: at /build/buildd/linux-2.6.31/arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x33/0x40() [ 0.001814] Hardware name: 1830F4U [ 0.001816] Modules linked in: [ 0.001821] Pid: 0, comm: swapper Not tainted 2.6.31-20-generic #57-Ubuntu [ 0.001824] Call Trace: [ 0.001833] [] warn_slowpath_common+0x6d/0xa0 [ 0.001838] [] ? native_apic_write_dummy+0x33/0x40 [ 0.001843] [] ? native_apic_write_dummy+0x33/0x40 [ 0.001848] [] warn_slowpath_null+0x15/0x20 [ 0.001852] [] native_apic_write_dummy+0x33/0x40 [ 0.001859] [] intel_init_thermal+0x67/0x1b0 [ 0.001864] [] mce_intel_feature_init+0xb/0x60 [ 0.001868] [] mce_cpu_features+0x10/0x40 [ 0.001876] [] mcheck_init+0x14a/0x188 [ 0.001880] [] ? init_hypervisor+0xb/0x2c [ 0.001885] [] identify_cpu+0x20e/0x21d [ 0.001892] [] identify_boot_cpu+0xd/0x23 [ 0.001896] [] check_bugs+0xb/0xe9 [ 0.001900] [] start_kernel+0x2dc/0x2ec [ 0.001904] [] ? unknown_bootoption+0x0/0x19e [ 0.001909] [] i386_start_kernel+0x7c/0x83 [ 0.001920] ---[ end trace a7919e7f17c0a725 ]--- [ 0.001924] CPU0: Thermal monitoring enabled (TM1) [ 0.001934] Performance Counters: [ 0.001937] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.001940] no hardware sampling interrupt available. [ 0.001942] p6 PMU driver. [ 0.001948] ... version: 0 [ 0.001950] ... bit width: 32 [ 0.001952] ... generic counters: 2 [ 0.001955] ... value mask: 00000000ffffffff [ 0.001957] ... max period: 000000007fffffff [ 0.001959] ... fixed-purpose counters: 0 [ 0.001962] ... counter mask: 0000000000000003 [ 0.001966] Checking 'hlt' instruction... OK. [ 0.016880] SMP alternatives: switching to UP code [ 0.023991] Freeing SMP alternatives: 20k freed [ 0.024012] ACPI: Core revision 20090521 [ 0.042903] ACPI: setting ELCR to 0200 (from 0800) [ 0.044072] weird, boot CPU (#0) not listed by the BIOS. [ 0.044075] SMP motherboard not detected. [ 0.044078] Local APIC not detected. Using dummy APIC emulation. [ 0.044080] SMP disabled [ 0.044228] Brought up 1 CPUs [ 0.044231] Total of 1 processors activated (3397.39 BogoMIPS). [ 0.044244] CPU0 attaching NULL sched-domain. [ 0.044471] Booting paravirtualized kernel on bare hardware [ 0.044704] regulator: core version 0.5 [ 0.044726] Time: 2:17:30 Date: 03/17/10 [ 0.044786] NET: Registered protocol family 16 [ 0.044932] EISA bus registered [ 0.044949] ACPI: bus type pci registered [ 0.045193] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 [ 0.045196] PCI: Using configuration type 1 for base access [ 0.046336] bio: create slab at 0 [ 0.048249] ACPI: EC: EC description table is found, configuring boot EC [ 0.056371] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.069346] ACPI: Interpreter enabled [ 0.069352] ACPI: (supports S0 S3 S4 S5) [ 0.069379] ACPI: Using PIC for interrupt routing [ 0.080836] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.080839] ACPI: EC: driver started in interrupt mode [ 0.080883] ACPI: Power Resource [PUBS] (on) [ 0.084076] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.084102] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.084146] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff] [ 0.084261] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f] [ 0.084314] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f] [ 0.084367] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f] [ 0.084427] pci 0000:00:1d.7: reg 10 32bit mmio: [0xc0000000-0xc00003ff] [ 0.084484] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.084490] pci 0000:00:1d.7: PME# disabled [ 0.084579] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.084583] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO [ 0.084608] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.084615] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.084623] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.084630] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.084638] pci 0000:00:1f.1: reg 20 io port: [0x1860-0x186f] [ 0.084646] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.084697] pci 0000:00:1f.3: reg 20 io port: [0x1880-0x189f] [ 0.084740] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff] [ 0.084747] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff] [ 0.084755] pci 0000:00:1f.5: reg 18 32bit mmio: [0xc0000c00-0xc0000dff] [ 0.084762] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xc0000800-0xc00008ff] [ 0.084791] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.084796] pci 0000:00:1f.5: PME# disabled [ 0.084826] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff] [ 0.084833] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f] [ 0.084870] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.084875] pci 0000:00:1f.6: PME# disabled [ 0.084911] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff] [ 0.084918] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff] [ 0.084924] pci 0000:01:00.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff] [ 0.084939] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.084959] pci 0000:01:00.0: supports D1 D2 [ 0.084994] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff] [ 0.084998] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff] [ 0.085002] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff] [ 0.085038] pci 0000:02:00.0: reg 10 32bit mmio: [0xb0000000-0xb0000fff] [ 0.085057] pci 0000:02:00.0: supports D1 D2 [ 0.085060] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.085064] pci 0000:02:00.0: PME# disabled [ 0.085100] pci 0000:02:00.2: reg 10 32bit mmio: [0xc0215000-0xc02157ff] [ 0.085108] pci 0000:02:00.2: reg 14 32bit mmio: [0xc0210000-0xc0213fff] [ 0.085148] pci 0000:02:00.2: supports D1 D2 [ 0.085150] pci 0000:02:00.2: PME# supported from D0 D1 D2 D3hot [ 0.085155] pci 0000:02:00.2: PME# disabled [ 0.085193] pci 0000:02:01.0: reg 10 32bit mmio: [0xc0220000-0xc023ffff] [ 0.085201] pci 0000:02:01.0: reg 14 32bit mmio: [0xc0200000-0xc020ffff] [ 0.085209] pci 0000:02:01.0: reg 18 io port: [0x8000-0x803f] [ 0.085229] pci 0000:02:01.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.085248] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold [ 0.085253] pci 0000:02:01.0: PME# disabled [ 0.085286] pci 0000:02:02.0: reg 10 32bit mmio: [0xc0214000-0xc0214fff] [ 0.085330] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold [ 0.085334] pci 0000:02:02.0: PME# disabled [ 0.085373] pci 0000:00:1e.0: transparent bridge [ 0.085378] pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff] [ 0.085384] pci 0000:00:1e.0: bridge 32bit mmio: [0xc0200000-0xcfffffff] [ 0.085389] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff] [ 0.085415] pci_bus 0000:00: on NUMA node 0 [ 0.085421] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.085475] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.085504] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.089185] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.089380] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 0.089572] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.089764] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.089936] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.090109] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.090282] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.090479] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.090711] SCSI subsystem initialized [ 0.090764] libata version 3.00 loaded. [ 0.090848] usbcore: registered new interface driver usbfs [ 0.090871] usbcore: registered new interface driver hub [ 0.090898] usbcore: registered new device driver usb [ 0.091044] ACPI: WMI: Mapper loaded [ 0.091046] PCI: Using ACPI for IRQ routing [ 0.091370] Bluetooth: Core ver 2.15 [ 0.091399] NET: Registered protocol family 31 [ 0.091401] Bluetooth: HCI device and connection manager initialized [ 0.091405] Bluetooth: HCI socket layer initialized [ 0.091407] NetLabel: Initializing [ 0.091409] NetLabel: domain hash size = 128 [ 0.091411] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.091428] NetLabel: unlabeled traffic allowed by default [ 0.093577] pnp: PnP ACPI init [ 0.093594] ACPI: bus type pnp registered [ 0.097630] pnp: PnP ACPI: found 13 devices [ 0.097632] ACPI: ACPI bus type pnp unregistered [ 0.097637] PnPBIOS: Disabled by ACPI PNP [ 0.097650] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.097654] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 0.097658] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 0.097662] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 0.097665] system 00:00: iomem range 0xcc000-0xcffff could not be reserved [ 0.097669] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved [ 0.097673] system 00:00: iomem range 0xdc000-0xdffff could not be reserved [ 0.097676] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved [ 0.097680] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved [ 0.097684] system 00:00: iomem range 0xe8000-0xebfff could not be reserved [ 0.097687] system 00:00: iomem range 0xec000-0xeffff could not be reserved [ 0.097691] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.097695] system 00:00: iomem range 0x100000-0x3fffffff could not be reserved [ 0.097699] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.097707] system 00:02: ioport range 0x1000-0x107f has been reserved [ 0.097711] system 00:02: ioport range 0x1180-0x11bf has been reserved [ 0.097715] system 00:02: ioport range 0x15e0-0x15ef has been reserved [ 0.097718] system 00:02: ioport range 0x1600-0x162f has been reserved [ 0.097722] system 00:02: ioport range 0x1632-0x167f has been reserved [ 0.097725] system 00:02: ioport range 0x1630-0x1631 has been reserved [ 0.132403] AppArmor: AppArmor Filesystem Enabled [ 0.132433] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.132437] pci 0000:00:01.0: IO window: 0x3000-0x3fff [ 0.132442] pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff [ 0.132446] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff [ 0.132453] pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03 [ 0.132457] pci 0000:02:00.0: IO window: 0x004000-0x0040ff [ 0.132462] pci 0000:02:00.0: IO window: 0x004400-0x0044ff [ 0.132467] pci 0000:02:00.0: PREFETCH window: 0xe8000000-0xebffffff [ 0.132472] pci 0000:02:00.0: MEM window: 0xc4000000-0xc7ffffff [ 0.132477] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.132481] pci 0000:00:1e.0: IO window: 0x4000-0x8fff [ 0.132488] pci 0000:00:1e.0: MEM window: 0xc0200000-0xcfffffff [ 0.132493] pci 0000:00:1e.0: PREFETCH window: 0xe8000000-0xefffffff [ 0.132509] pci 0000:00:1e.0: setting latency timer to 64 [ 0.132850] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.132853] PCI: setting IRQ 11 as level-triggered [ 0.132859] pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.132867] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.132871] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.132874] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff] [ 0.132878] pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff] [ 0.132881] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff] [ 0.132884] pci_bus 0000:02: resource 0 io: [0x4000-0x8fff] [ 0.132888] pci_bus 0000:02: resource 1 mem: [0xc0200000-0xcfffffff] [ 0.132891] pci_bus 0000:02: resource 2 pref mem [0xe8000000-0xefffffff] [ 0.132894] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.132897] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.132901] pci_bus 0000:03: resource 0 io: [0x4000-0x40ff] [ 0.132904] pci_bus 0000:03: resource 1 io: [0x4400-0x44ff] [ 0.132907] pci_bus 0000:03: resource 2 pref mem [0xe8000000-0xebffffff] [ 0.132911] pci_bus 0000:03: resource 3 mem: [0xc4000000-0xc7ffffff] [ 0.132952] NET: Registered protocol family 2 [ 0.133060] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.133456] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.134865] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.135784] TCP: Hash tables configured (established 131072 bind 65536) [ 0.135789] TCP reno registered [ 0.135938] NET: Registered protocol family 1 [ 0.136082] Trying to unpack rootfs image as initramfs... [ 0.397117] Freeing initrd memory: 7704k freed [ 0.408102] Simple Boot Flag at 0x35 set to 0x1 [ 0.408206] cpufreq-nforce2: No nForce2 chipset. [ 0.408255] Scanning for low memory corruption every 60 seconds [ 0.408407] audit: initializing netlink socket (disabled) [ 0.408446] type=2000 audit(1268792250.407:1): initialized [ 0.418821] highmem bounce pool size: 64 pages [ 0.418828] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.420523] VFS: Disk quotas dquot_6.5.2 [ 0.420590] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.421225] fuse init (API version 7.12) [ 0.421321] msgmni has been set to 1732 [ 0.421545] alg: No test for stdrng (krng) [ 0.421559] io scheduler noop registered [ 0.421562] io scheduler anticipatory registered [ 0.421565] io scheduler deadline registered [ 0.421611] io scheduler cfq registered (default) [ 0.421696] pci 0000:01:00.0: Boot video device [ 0.421815] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.421842] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.422270] ACPI: AC Adapter [AC] (on-line) [ 0.422349] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.422354] ACPI: Power Button [PWRF] [ 0.422413] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.422778] ACPI: Lid Switch [LID] [ 0.422829] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.422834] ACPI: Sleep Button [SLPB] [ 0.424933] Marking TSC unstable due to TSC halts in idle [ 0.424954] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.424982] processor LNXCPU:00: registered as cooling_device0 [ 0.424986] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.428010] Switched to high resolution mode on CPU 0 [ 0.431388] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.431397] ACPI: Thermal Zone [THM0] (67 C) [ 0.431448] isapnp: Scanning for PnP cards... [ 0.784582] isapnp: No Plug & Play device found [ 0.785832] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.785949] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A [ 0.786774] serial 00:0a: activated [ 0.786861] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 0.787289] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.787295] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 0.787302] serial 0000:00:1f.6: PCI INT B disabled [ 0.788422] brd: module loaded [ 0.788950] loop: module loaded [ 0.789033] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.789156] ata_piix 0000:00:1f.1: version 2.13 [ 0.789164] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.789497] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.789501] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.789549] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.789623] scsi0 : ata_piix [ 0.789733] scsi1 : ata_piix [ 0.790715] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 [ 0.790719] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 [ 0.791651] Fixed MDIO Bus: probed [ 0.791691] PPP generic driver version 2.4.2 [ 0.791788] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.819114] ACPI: Battery Slot [BAT0] (battery present) [ 0.823298] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 [ 0.823630] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 0.823635] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 0.823650] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.823654] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.823691] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.827583] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.827590] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.827600] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000 [ 0.840037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.840140] usb usb1: configuration #1 chosen from 1 choice [ 0.840174] hub 1-0:1.0: USB hub found [ 0.840183] hub 1-0:1.0: 6 ports detected [ 0.840248] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.840266] uhci_hcd: USB Universal Host Controller Interface driver [ 0.840643] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 0.840650] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.840657] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.840661] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.840697] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.840718] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 [ 0.840809] usb usb2: configuration #1 chosen from 1 choice [ 0.840842] hub 2-0:1.0: USB hub found [ 0.840851] hub 2-0:1.0: 2 ports detected [ 0.841291] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0 [ 0.841619] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.841623] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.841630] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.841634] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.841666] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.841687] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 [ 0.841771] usb usb3: configuration #1 chosen from 1 choice [ 0.841800] hub 3-0:1.0: USB hub found [ 0.841808] hub 3-0:1.0: 2 ports detected [ 0.841853] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.841860] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.841864] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.841898] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.841919] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 [ 0.842006] usb usb4: configuration #1 chosen from 1 choice [ 0.842034] hub 4-0:1.0: USB hub found [ 0.842042] hub 4-0:1.0: 2 ports detected [ 0.842146] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.848716] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.848723] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.848777] mice: PS/2 mouse device common for all mice [ 0.848891] rtc_cmos 00:06: RTC can wake from S4 [ 0.848925] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.848946] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.849058] device-mapper: uevent: version 1.0.3 [ 0.849149] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.849230] device-mapper: multipath: version 1.1.0 loaded [ 0.849233] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.849364] EISA: Probing bus 0 at eisa.0 [ 0.849370] Cannot allocate resource for EISA slot 1 [ 0.849373] Cannot allocate resource for EISA slot 2 [ 0.849376] Cannot allocate resource for EISA slot 3 [ 0.849378] Cannot allocate resource for EISA slot 4 [ 0.849381] Cannot allocate resource for EISA slot 5 [ 0.849383] Cannot allocate resource for EISA slot 6 [ 0.849386] Cannot allocate resource for EISA slot 7 [ 0.849388] Cannot allocate resource for EISA slot 8 [ 0.849391] EISA: Detected 0 cards. [ 0.849477] cpuidle: using governor ladder [ 0.849546] cpuidle: using governor menu [ 0.850105] TCP cubic registered [ 0.850286] NET: Registered protocol family 10 [ 0.850749] lo: Disabled Privacy Extensions [ 0.851083] NET: Registered protocol family 17 [ 0.851110] Bluetooth: L2CAP ver 2.13 [ 0.851113] Bluetooth: L2CAP socket layer initialized [ 0.851116] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.851118] Bluetooth: SCO socket layer initialized [ 0.851158] Bluetooth: RFCOMM TTY layer initialized [ 0.851161] Bluetooth: RFCOMM socket layer initialized [ 0.851163] Bluetooth: RFCOMM ver 1.11 [ 0.851291] P-state transition latency capped at 20 uS [ 0.851581] Using IPI No-Shortcut mode [ 0.851646] PM: Resume from disk failed. [ 0.851661] registered taskstats version 1 [ 0.851779] Magic number: 2:187:258 [ 0.851858] rtc_cmos 00:06: setting system clock to 2010-03-17 02:17:31 UTC (1268792251) [ 0.851862] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.851865] EDD information not available. [ 0.853897] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.956591] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, 1.02, max UDMA/33 [ 0.956940] ata1.00: ATA-7: FUJITSU MHV2040AT, 008400A0, max UDMA/100 [ 0.956944] ata1.00: 78140160 sectors, multi 16: LBA [ 0.972369] ata2.00: configured for UDMA/33 [ 0.972631] ata1.00: configured for UDMA/100 [ 0.972775] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2040A 0084 PQ: 0 ANSI: 5 [ 0.972903] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.972947] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 0.973000] sd 0:0:0:0: [sda] Write Protect is off [ 0.973004] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.973031] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.973168] sda: [ 0.977595] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4244N 1.02 PQ: 0 ANSI: 5 [ 0.988629] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 0.988633] Uniform CD-ROM driver Revision: 3.20 [ 0.988714] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 0.988766] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.002014] sda1 sda2 < sda5 > [ 1.031106] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.031124] Freeing unused kernel memory: 540k freed [ 1.031521] Write protecting the kernel text: 4580k [ 1.031564] Write protecting the kernel read-only data: 1840k [ 1.187126] Linux agpgart interface v0.103 [ 1.191258] agpgart-intel 0000:00:00.0: Intel 855PM Chipset [ 1.211736] Floppy drive(s): fd0 is 1.44M [ 1.222888] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/device:04/input/input5 [ 1.222942] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 1.227773] FDC 0 is a National Semiconductor PC87306 [ 1.260629] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 1.350723] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.371632] [drm] Initialized drm 1.1.0 20060810 [ 1.396222] [drm] radeon default to kernel modesetting DISABLED. [ 1.396379] pci 0000:01:00.0: power state changed by ACPI to D0 [ 1.396392] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.397759] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0 [ 1.403817] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI [ 1.403820] Copyright (c) 1999-2006 Intel Corporation. [ 1.403866] e1000 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 1.424138] usb 1-4: configuration #1 chosen from 1 choice [ 1.660437] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:10:c6:e1:ef:2d [ 1.660976] Initializing USB Mass Storage driver... [ 1.661071] scsi2 : SCSI emulation for USB Mass Storage devices [ 1.661157] usbcore: registered new interface driver usb-storage [ 1.661161] USB Mass Storage support registered. [ 1.661223] usb-storage: device found at 3 [ 1.661225] usb-storage: waiting for device to settle before scanning [ 1.698304] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 1.698684] ohci1394 0000:02:00.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 1.752059] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[c0215000-c02157ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.872030] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 2.072102] usb 3-1: configuration #1 chosen from 1 choice [ 2.087013] usbcore: registered new interface driver hiddev [ 2.104636] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input6 [ 2.104733] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1/input0 [ 2.104748] usbcore: registered new interface driver usbhid [ 2.104751] usbhid: v2.6:USB HID core driver [ 2.816960] xor: automatically using best checksumming function: pIII_sse [ 2.836019] pIII_sse : 4406.000 MB/sec [ 2.836022] xor: using function: pIII_sse (4406.000 MB/sec) [ 2.839828] device-mapper: dm-raid45: initialized v0.2594b [ 3.040171] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032601113b] [ 3.346715] PM: Starting manual resume from disk [ 3.346720] PM: Resume from partition 8:5 [ 3.346723] PM: Checking hibernation image. [ 3.347187] PM: Resume from disk failed. [ 3.388533] EXT4-fs (sda1): barriers enabled [ 3.408258] kjournald2 starting: pid 360, dev sda1:8, commit interval 5 seconds [ 3.408291] EXT4-fs (sda1): delayed allocation enabled [ 3.408295] EXT4-fs: file extents enabled [ 3.413021] EXT4-fs: mballoc enabled [ 3.413037] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 4.459989] type=1505 audit(1268792255.107:2): operation="profile_load" pid=384 name=/usr/share/gdm/guest-session/Xsession [ 4.462681] type=1505 audit(1268792255.108:3): operation="profile_load" pid=385 name=/sbin/dhclient3 [ 4.463421] type=1505 audit(1268792255.108:4): operation="profile_load" pid=385 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 4.463824] type=1505 audit(1268792255.108:5): operation="profile_load" pid=385 name=/usr/lib/connman/scripts/dhclient-script [ 4.557334] type=1505 audit(1268792255.204:6): operation="profile_load" pid=386 name=/usr/bin/evince [ 4.569640] type=1505 audit(1268792255.216:7): operation="profile_load" pid=386 name=/usr/bin/evince-previewer [ 4.576988] type=1505 audit(1268792255.224:8): operation="profile_load" pid=386 name=/usr/bin/evince-thumbnailer [ 4.605984] type=1505 audit(1268792255.252:9): operation="profile_load" pid=388 name=/usr/lib/cups/backend/cups-pdf [ 6.660289] usb-storage: device scan complete [ 6.660904] scsi 2:0:0:0: Direct-Access CREATIVE ZEN Stone 1061 PQ: 0 ANSI: 4 [ 6.661365] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 6.661985] sd 2:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 6.662483] sd 2:0:0:0: [sdb] Write Protect is off [ 6.662487] sd 2:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 6.662490] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.663985] sd 2:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 6.664482] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.664486] sdb: unknown partition table [ 6.668234] sd 2:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 6.668809] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 6.668813] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 22.091534] udev: starting version 147 [ 22.120591] Adding 1646620k swap on /dev/sda5. Priority:-1 extents:1 across:1646620k [ 22.253383] lp: driver loaded but no devices found [ 22.306026] irda_init() [ 22.306045] NET: Registered protocol family 23 [ 22.309370] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. [ 22.309533] nsc-ircc, chip->init [ 22.309542] nsc-ircc, Found chip at base=0x02e [ 22.309566] nsc-ircc, driver loaded (Dag Brattli) [ 22.309572] nsc_ircc_open(), can't get iobase of 0x2f8 [ 22.309599] nsc-ircc, Found chip at base=0x02e [ 22.309622] nsc-ircc, driver loaded (Dag Brattli) [ 22.309625] nsc_ircc_open(), can't get iobase of 0x2f8 [ 22.310305] nsc-ircc 00:0c: disabled [ 22.394115] parport_pc 00:0b: reported by Plug and Play ACPI [ 22.394157] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 22.397409] Non-volatile memory driver v1.3 [ 22.477627] thinkpad_acpi: ThinkPad ACPI Extras v0.23 [ 22.477631] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 22.477633] thinkpad_acpi: ThinkPad BIOS 1RETDNWW (3.19 ), EC 1RHT71WW-3.04 [ 22.477636] thinkpad_acpi: IBM ThinkPad R51, model 1830F4U [ 22.486200] lp0: using parport0 (interrupt-driven). [ 22.493978] EXT4-fs (sda1): internal journal on sda1:8 [ 22.507304] Registered led device: tpacpi::thinklight [ 22.507346] Registered led device: tpacpi::power [ 22.507364] Registered led device: tpacpi::standby [ 22.535089] input: ThinkPad Extra Buttons as /devices/virtual/input/input7 [ 22.537914] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 22.563765] intel_rng: FWH not detected [ 22.624425] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0552] [ 22.624446] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI [ 22.624449] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI [ 22.624455] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21b22, devctl 0x64 [ 22.626932] ppdev: user-space parallel port driver [ 22.675841] ip_tables: (C) 2000-2006 Netfilter Core Team [ 22.679185] lib80211: common routines for IEEE802.11 drivers [ 22.679189] lib80211_crypt: registered algorithm 'NULL' [ 22.684451] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 22.684454] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 22.710327] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 22.710331] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 22.819221] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 22.819260] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 22.841122] nf_conntrack version 0.5.0 (16374 buckets, 65496 max) [ 22.841378] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 22.841381] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 22.841384] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 22.860461] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0438, PCI irq 11 [ 22.860467] yenta_cardbus 0000:02:00.0: Socket status: 30000086 [ 22.860475] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff [ 22.860480] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean. [ 22.861757] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 22.861761] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff [ 22.863207] ipw2200 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 22.863275] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 22.863325] ipw2200 0000:02:02.0: firmware: requesting ipw2200-bss.fw [ 23.056846] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels) [ 23.172855] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 23.173847] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 23.174277] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 23.174644] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 23.175164] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 23.328709] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 [ 23.328716] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 23.407226] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 23.573683] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.675587] __ratelimit: 6 callbacks suppressed [ 23.675591] type=1505 audit(1268792274.320:12): operation="profile_replace" pid=995 name=/usr/share/gdm/guest-session/Xsession [ 23.677863] type=1505 audit(1268792274.324:13): operation="profile_replace" pid=996 name=/sbin/dhclient3 [ 23.678610] type=1505 audit(1268792274.324:14): operation="profile_replace" pid=996 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 23.679055] type=1505 audit(1268792274.324:15): operation="profile_replace" pid=996 name=/usr/lib/connman/scripts/dhclient-script [ 23.684583] type=1505 audit(1268792274.332:16): operation="profile_replace" pid=997 name=/usr/bin/evince [ 23.699773] type=1505 audit(1268792274.344:17): operation="profile_replace" pid=997 name=/usr/bin/evince-previewer [ 23.708055] type=1505 audit(1268792274.356:18): operation="profile_replace" pid=997 name=/usr/bin/evince-thumbnailer [ 23.718379] type=1505 audit(1268792274.364:19): operation="profile_replace" pid=999 name=/usr/lib/cups/backend/cups-pdf [ 23.719263] type=1505 audit(1268792274.364:20): operation="profile_replace" pid=999 name=/usr/sbin/cupsd [ 23.724357] type=1505 audit(1268792274.372:21): operation="profile_replace" pid=1000 name=/usr/sbin/tcpdump [ 23.744476] intel8x0_measure_ac97_clock: measured 55690 usecs (2683 samples) [ 23.744480] intel8x0: clocking to 48000 [ 24.078004] ttyS1: LSR safety check engaged! [ 24.624606] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 24.624611] vboxdrv: Successfully done. [ 24.624613] vboxdrv: Found 1 processor cores. [ 24.624752] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 24.624755] vboxdrv: Successfully loaded version 3.1.4 (interface 0x00100001). [ 24.902431] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 24.902451] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 24.902488] pci 0000:01:00.0: putting AGP V2 device into 4x mode [ 25.131482] [drm] Setting GART location based on new memory map [ 25.131494] [drm] Loading R100 Microcode [ 25.131560] [drm] writeback test succeeded in 1 usecs [ 26.282903] psmouse serio2: ID: 10 00 64 [ 30.951167] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 31.256122] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9 [ 34.208030] eth1: no IPv6 routers present [ 72.115203] lib80211_crypt: registered algorithm 'CCMP' [ 72.195007] padlock: VIA PadLock not detected. [ 72.201477] lib80211_crypt: registered algorithm 'TKIP' [ 86.132030] Clocksource tsc unstable (delta = -114593547 ns) [ 399.725306] usb 1-4: USB disconnect, address 3 [ 415.844065] usb 1-4: new high speed USB device using ehci_hcd and address 4 [ 415.977920] usb 1-4: configuration #1 chosen from 1 choice [ 415.982043] scsi3 : SCSI emulation for USB Mass Storage devices [ 415.982319] usb-storage: device found at 4 [ 415.982326] usb-storage: waiting for device to settle before scanning [ 420.980318] usb-storage: device scan complete [ 420.980936] scsi 3:0:0:0: Direct-Access CREATIVE ZEN Stone 1061 PQ: 0 ANSI: 4 [ 420.982169] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 421.003220] sd 3:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 421.004251] sd 3:0:0:0: [sdb] Write Protect is off [ 421.004256] sd 3:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 421.004259] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 421.006480] sd 3:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 421.006974] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 421.006979] sdb: unknown partition table [ 421.018300] sd 3:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 421.019777] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 421.019783] sd 3:0:0:0: [sdb] Attached SCSI removable disk [ 457.776713] sd 3:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 457.777326] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 457.777338] sdb: [ 502.887814] sd 3:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 502.889054] sd 3:0:0:0: [sdb] Assuming drive cache: write through [ 502.889067] sdb: [ 525.681932] ipw2200: Firmware error detected. Restarting. [ 969.031156] mtrr: no MTRR for e0000000,2000000 found [ 969.390068] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 969.390091] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 969.390128] pci 0000:01:00.0: putting AGP V2 device into 4x mode [ 969.618483] [drm] Setting GART location based on new memory map [ 969.618499] [drm] Loading R100 Microcode [ 969.618561] [drm] writeback test succeeded in 2 usecs [ 1057.489960] usb 1-4: USB disconnect, address 4 [ 1061.064074] usb 1-4: new high speed USB device using ehci_hcd and address 5 [ 1061.197820] usb 1-4: configuration #1 chosen from 1 choice [ 1061.201762] scsi4 : SCSI emulation for USB Mass Storage devices [ 1061.202048] usb-storage: device found at 5 [ 1061.202054] usb-storage: waiting for device to settle before scanning [ 1066.200344] usb-storage: device scan complete [ 1066.200957] scsi 4:0:0:0: Direct-Access CREATIVE ZEN Stone 1061 PQ: 0 ANSI: 4 [ 1066.202206] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 1066.223183] sd 4:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1066.225911] sd 4:0:0:0: [sdb] Write Protect is off [ 1066.225916] sd 4:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 1066.225920] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1066.231253] sd 4:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1066.231744] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1066.231750] sdb: [ 1066.244289] sd 4:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1066.245133] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1066.245140] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 1153.816102] usb 1-4: USB disconnect, address 5 [ 1156.800079] usb 1-4: new high speed USB device using ehci_hcd and address 6 [ 1157.000238] usb 1-4: configuration #1 chosen from 1 choice [ 1157.017017] scsi5 : SCSI emulation for USB Mass Storage devices [ 1157.020850] usb-storage: device found at 6 [ 1157.020854] usb-storage: waiting for device to settle before scanning [ 1162.020340] usb-storage: device scan complete [ 1162.020953] scsi 5:0:0:0: Direct-Access CREATIVE ZEN Stone 1061 PQ: 0 ANSI: 4 [ 1162.022194] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 1162.042725] sd 5:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1162.044205] sd 5:0:0:0: [sdb] Write Protect is off [ 1162.044209] sd 5:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 1162.044212] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 1162.046879] sd 5:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1162.047374] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 1162.047379] sdb: [ 1162.058008] sd 5:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1162.059005] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 1162.059012] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 1345.363911] usb 1-4: USB disconnect, address 6 [ 1422.744074] usb 1-4: new high speed USB device using ehci_hcd and address 7 [ 1422.877883] usb 1-4: configuration #1 chosen from 1 choice [ 1422.881892] scsi6 : SCSI emulation for USB Mass Storage devices [ 1422.882176] usb-storage: device found at 7 [ 1422.882182] usb-storage: waiting for device to settle before scanning [ 1427.880280] usb-storage: device scan complete [ 1427.880893] scsi 6:0:0:0: Direct-Access CREATIVE ZEN Stone 1061 PQ: 0 ANSI: 4 [ 1427.882148] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 1427.903762] sd 6:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1427.905888] sd 6:0:0:0: [sdb] Write Protect is off [ 1427.905892] sd 6:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 1427.905896] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 1427.908358] sd 6:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1427.908931] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 1427.908936] sdb: [ 1427.913203] sd 6:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1427.915096] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 1427.915102] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 1539.921022] usb 1-4: USB disconnect, address 7 [ 1545.356066] usb 1-4: new high speed USB device using ehci_hcd and address 8 [ 1545.489873] usb 1-4: configuration #1 chosen from 1 choice [ 1545.493852] scsi7 : SCSI emulation for USB Mass Storage devices [ 1545.494131] usb-storage: device found at 8 [ 1545.494138] usb-storage: waiting for device to settle before scanning [ 1550.492267] usb-storage: device scan complete [ 1550.492882] scsi 7:0:0:0: Direct-Access CREATIVE ZEN Stone 1061 PQ: 0 ANSI: 4 [ 1550.494118] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 1550.511706] sd 7:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1550.513226] sd 7:0:0:0: [sdb] Write Protect is off [ 1550.513230] sd 7:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 1550.513233] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 1550.515431] sd 7:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1550.515926] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 1550.515931] sdb: sdb1 [ 1550.522322] sd 7:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1550.523809] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 1550.523814] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 1577.594372] mtrr: no MTRR for e0000000,2000000 found [ 1577.883376] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 1577.883398] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 1577.883436] pci 0000:01:00.0: putting AGP V2 device into 4x mode [ 1578.098242] [drm] Setting GART location based on new memory map [ 1578.098258] [drm] Loading R100 Microcode [ 1578.098319] [drm] writeback test succeeded in 2 usecs [ 1629.542445] usb 1-4: USB disconnect, address 8 [ 1634.556078] usb 1-4: new high speed USB device using ehci_hcd and address 9 [ 1634.689842] usb 1-4: configuration #1 chosen from 1 choice [ 1634.693782] scsi8 : SCSI emulation for USB Mass Storage devices [ 1634.694057] usb-storage: device found at 9 [ 1634.694063] usb-storage: waiting for device to settle before scanning [ 1639.692354] usb-storage: device scan complete [ 1639.692984] scsi 8:0:0:0: Direct-Access CREATIVE ZEN Stone 1061 PQ: 0 ANSI: 4 [ 1639.694198] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 1639.710330] sd 8:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1639.711024] sd 8:0:0:0: [sdb] Write Protect is off [ 1639.711028] sd 8:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 1639.711031] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 1639.713527] sd 8:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1639.714021] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 1639.714026] sdb: sdb1 [ 1639.718548] sd 8:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1639.720601] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 1639.720608] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 1655.802234] end_request: I/O error, dev fd0, sector 0 [ 1685.313200] usb 1-4: USB disconnect, address 9 [ 1689.292079] usb 1-4: new high speed USB device using ehci_hcd and address 10 [ 1689.425901] usb 1-4: configuration #1 chosen from 1 choice [ 1689.429871] scsi9 : SCSI emulation for USB Mass Storage devices [ 1689.430148] usb-storage: device found at 10 [ 1689.430155] usb-storage: waiting for device to settle before scanning [ 1694.428302] usb-storage: device scan complete [ 1694.428907] scsi 9:0:0:0: Direct-Access CREATIVE ZEN Stone 1061 PQ: 0 ANSI: 4 [ 1694.430123] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 1694.447376] sd 9:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1694.447954] sd 9:0:0:0: [sdb] Write Protect is off [ 1694.447957] sd 9:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 1694.447961] sd 9:0:0:0: [sdb] Assuming drive cache: write through [ 1694.450583] sd 9:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1694.451077] sd 9:0:0:0: [sdb] Assuming drive cache: write through [ 1694.451082] sdb: sdb1 [ 1694.457346] sd 9:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1694.458087] sd 9:0:0:0: [sdb] Assuming drive cache: write through [ 1694.458093] sd 9:0:0:0: [sdb] Attached SCSI removable disk [ 1883.691072] usb 1-4: USB disconnect, address 10 [ 1895.752074] usb 1-4: new high speed USB device using ehci_hcd and address 11 [ 1895.885856] usb 1-4: configuration #1 chosen from 1 choice [ 1895.890015] scsi10 : SCSI emulation for USB Mass Storage devices [ 1895.890291] usb-storage: device found at 11 [ 1895.890298] usb-storage: waiting for device to settle before scanning [ 1900.888361] usb-storage: device scan complete [ 1900.888989] scsi 10:0:0:0: Direct-Access CREATIVE ZEN Stone 1061 PQ: 0 ANSI: 4 [ 1900.890197] sd 10:0:0:0: Attached scsi generic sg2 type 0 [ 1900.910351] sd 10:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1900.911436] sd 10:0:0:0: [sdb] Write Protect is off [ 1900.911440] sd 10:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 1900.911443] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 1900.915419] sd 10:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1900.915910] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 1900.915915] sdb: sdb1 [ 1900.922552] sd 10:0:0:0: [sdb] 483840 2048-byte logical blocks: (990 MB/945 MiB) [ 1900.924210] sd 10:0:0:0: [sdb] Assuming drive cache: write through [ 1900.924216] sd 10:0:0:0: [sdb] Attached SCSI removable disk [ 1941.088135] devkit-disks-he[5498]: segfault at 96dfc0 ip 00312f93 sp bfea3330 error 4 in libc-2.10.1.so[2a0000+13e000] [ 1956.628698] devkit-disks-he[5548]: segfault at 96dfc0 ip 00accf93 sp bff94c70 error 4 in libc-2.10.1.so[a5a000+13e000] [ 1964.081617] devkit-disks-he[5574]: segfault at 96dfc0 ip 00490f93 sp bfa14640 error 4 in libc-2.10.1.so[41e000+13e000] [ 1976.413080] devkit-disks-he[5617]: segfault at 96dfc0 ip 00495f93 sp bfd18140 error 4 in libc-2.10.1.so[423000+13e000] [ 2035.783887] devkit-disks-he[5807]: segfault at bfaac000 ip 003a2056 sp bfaaaea8 error 6 in libc-2.10.1.so[32d000+13e000] [ 2127.209644] ipw2200: Firmware error detected. Restarting. [ 2845.875415] ipw2200: Firmware error detected. Restarting. [ 5125.872643] ipw2200: Firmware error detected. Restarting. [10287.218058] ipw2200: Firmware error detected. Restarting. [13918.349695] usb 1-4: USB disconnect, address 11 [13919.168108] usb 3-1: USB disconnect, address 2 [13955.160074] usb 3-1: new low speed USB device using uhci_hcd and address 3 [13955.336389] usb 3-1: configuration #1 chosen from 1 choice [13955.356547] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input10 [13955.356793] generic-usb 0003:046D:C016.0002: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1/input0 [15575.350272] ipw2200: Firmware error detected. Restarting. [18333.826789] ipw2200: Firmware error detected. Restarting. [21213.570375] ipw2200: Firmware error detected. Restarting. [21333.581031] ipw2200: Firmware error detected. Restarting. [23735.373447] ipw2200: Firmware error detected. Restarting. [27933.279303] ipw2200: Firmware error detected. Restarting. [31295.139735] ipw2200: Firmware error detected. Restarting. [32375.333718] ipw2200: Firmware error detected. Restarting. [38273.988710] PM: Syncing filesystems ... done. [38274.002394] PM: Preparing system for mem sleep [38274.002401] Freezing user space processes ... (elapsed 0.00 seconds) done. [38274.003990] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [38274.004093] PM: Entering mem sleep [38274.004113] Suspending console(s) (use no_console_suspend to debug) [38274.214754] sd 0:0:0:0: [sda] Synchronizing SCSI cache [38274.214949] sd 0:0:0:0: [sda] Stopping disk [38276.156405] parport_pc 00:0b: disabled [38276.156655] serial 00:0a: disabled [38276.156725] eth1: Going into suspend... [38276.157700] ipw2200 0000:02:02.0: PCI INT A disabled [38276.157706] ACPI handle has no context! [38276.172149] e1000 0000:02:01.0: PCI INT A disabled [38276.172155] e1000 0000:02:01.0: PME# enabled [38276.188170] ACPI handle has no context! [38276.204037] pci 0000:01:00.0: PCI INT A disabled [38276.204226] Intel ICH 0000:00:1f.5: PCI INT B disabled [38276.204397] ata_piix 0000:00:1f.1: PCI INT A disabled [38276.204407] ehci_hcd 0000:00:1d.7: PCI INT D disabled [38276.204414] uhci_hcd 0000:00:1d.2: PCI INT C disabled [38276.204420] uhci_hcd 0000:00:1d.1: PCI INT B disabled [38276.204427] uhci_hcd 0000:00:1d.0: PCI INT A disabled [38276.204455] PM: suspend devices took 2.200 seconds [38276.204683] ehci_hcd 0000:00:1d.7: PME# disabled [38276.324063] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3 [38276.420071] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D3 [38276.516071] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3 [38276.660068] ACPI: Preparing to enter system sleep state S3 [38277.212173] Disabling non-boot CPUs ... [38277.212221] Extended CMOS year: 2000 [38277.212221] Back to C! [38277.212221] CPU0: Thermal monitoring enabled (TM1) [38277.212221] Extended CMOS year: 2000 [38277.212221] ACPI: Waking up from system sleep state S3 [38278.348141] pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2a03030, writing 0x22a03030) [38278.516064] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [38278.516070] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b) [38278.516082] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x1801) [38278.516095] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001) [38278.548072] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0 [38278.548078] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20b) [38278.548090] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x1821) [38278.548102] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001) [38278.548113] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x30b) [38278.548125] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x1841) [38278.548137] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001) [38278.548155] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40b) [38278.548173] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xc0000000) [38278.548182] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102) [38278.548198] ehci_hcd 0000:00:1d.7: PME# disabled [38278.548253] ata_piix 0000:00:1f.1: restoring config space at offset 0x9 (was 0x0, writing 0x40000000) [38278.548266] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800007) [38278.548315] Intel ICH 0000:00:1f.5: restoring config space at offset 0x1 (was 0x2900007, writing 0x2900003) [38278.548344] pci 0000:00:1f.6: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001) [38278.548371] pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x2b00387, writing 0x2b00383) [38278.564056] ohci1394 0000:02:00.2: restoring config space at offset 0xf (was 0x4020300, writing 0x402030b) [38278.564074] ohci1394 0000:02:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804008) [38278.564081] ohci1394 0000:02:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100116) [38278.564098] e1000 0000:02:01.0: restoring config space at offset 0xf (was 0xff0100, writing 0xff010b) [38278.564112] e1000 0000:02:01.0: restoring config space at offset 0x6 (was 0x1, writing 0x8001) [38278.564118] e1000 0000:02:01.0: restoring config space at offset 0x5 (was 0x0, writing 0xc0200000) [38278.564123] e1000 0000:02:01.0: restoring config space at offset 0x4 (was 0x0, writing 0xc0220000) [38278.564128] e1000 0000:02:01.0: restoring config space at offset 0x3 (was 0x0, writing 0x4008) [38278.564135] e1000 0000:02:01.0: restoring config space at offset 0x1 (was 0x2300000, writing 0x2300117) [38278.708150] pm_op(): pci_pm_resume+0x0/0x90 returns -16 [38278.708154] PM: Device 0000:00:00.0 failed to resume: error -16 [38278.708167] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [38278.708173] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [38278.708192] usb usb2: root hub lost power or was reset [38278.708209] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [38278.708215] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [38278.708233] usb usb3: root hub lost power or was reset [38278.708266] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [38278.708272] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [38278.708289] usb usb4: root hub lost power or was reset [38278.708304] ehci_hcd 0000:00:1d.7: PME# disabled [38278.708310] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11 [38278.708316] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [38278.708347] pci 0000:00:1e.0: setting latency timer to 64 [38278.708357] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [38278.708362] ata_piix 0000:00:1f.1: setting latency timer to 64 [38278.708672] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11 [38278.708678] Intel ICH 0000:00:1f.5: setting latency timer to 64 [38278.872731] ata2.00: ACPI cmd ef/03:42:00:00:00:a0 filtered out [38278.872735] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [38278.873741] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded [38278.874256] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded [38278.874260] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out [38278.874264] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out [38278.874267] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [38278.874700] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded [38278.896448] ata2.00: configured for UDMA/33 [38278.896787] ata1.00: configured for UDMA/100 [38278.920530] ata1.00: configured for UDMA/100 [38278.920533] ata1: EH complete [38279.721862] pci 0000:00:1f.6: PME# disabled [38279.721867] pci 0000:01:00.0: PME# disabled [38279.721873] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [38279.916138] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[c0215000-c02157ff] Max Packet=[2048] IR/IT contexts=[4/8] [38279.916255] e1000 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [38279.916263] e1000 0000:02:01.0: PME# disabled [38279.916267] e1000 0000:02:01.0: PME# disabled [38279.949490] eth1: Coming out of suspend... [38279.949496] ipw2200 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [38279.950099] serial 00:0a: activated [38279.950686] parport_pc 00:0b: activated [38280.429559] sd 0:0:0:0: [sda] Starting disk [38283.444024] [38283.444026] floppy driver state [38283.444028] ------------------- [38283.444031] now=9495861 last interrupt=339040 diff=9156821 last called handler=f808c500 [38283.444033] timeout_message=lock fdc [38283.444035] last output bytes: [38283.444037] 8 81 338863 [38283.444039] 7 80 338863 [38283.444040] 0 90 338863 [38283.444042] 8 81 338950 [38283.444044] 8 80 338953 [38283.444046] 8 80 338953 [38283.444048] 8 80 338953 [38283.444049] 8 80 338953 [38283.444051] 12 80 338953 [38283.444053] 0 90 338953 [38283.444055] 13 80 338953 [38283.444056] 0 90 338953 [38283.444058] 1a 90 338953 [38283.444060] 0 90 338953 [38283.444061] 3 80 338953 [38283.444063] c1 90 338953 [38283.444065] 10 90 338953 [38283.444067] 7 80 338953 [38283.444068] 0 90 338953 [38283.444070] 8 81 339040 [38283.444072] last result at 339040 [38283.444073] last redo_fd_request at 339041 [38283.444075] 70 0 [38283.444081] status=0 [38283.444083] fdc_busy=1 [38283.444084] do_floppy=f8088770 [38283.444086] cont=f8091904 [38283.444087] current_req=(null) [38283.444089] command_status=-1 [38283.444090] [38283.444094] floppy0: floppy timeout called [38283.704036] usb 3-1: reset low speed USB device using uhci_hcd and address 3 [38284.011281] PM: resume devices took 5.444 seconds [38284.011370] PM: Finishing wakeup. [38284.011372] Restarting tasks ... [38284.012163] hub 3-0:1.0: over-current change on port 1 [38284.042790] done. [38284.119795] hub 3-0:1.0: over-current change on port 2 [38284.244674] ADDRCONF(NETDEV_UP): eth0: link is not ready [38284.245619] ADDRCONF(NETDEV_UP): eth1: link is not ready [38285.445212] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [38285.445250] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [38285.445315] pci 0000:01:00.0: putting AGP V2 device into 4x mode [38285.445365] [drm] Loading R100 Microcode [38289.028174] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [38299.652119] eth1: no IPv6 routers present [40383.249762] ipw2200: Firmware error detected. Restarting.