[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-16-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-3ubuntu1) ) #25-Ubuntu SMP Tue Mar 9 16:33:12 UTC 2010 (Ubuntu 2.6.32-16.25-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-16-generic root=UUID=0d99c911-213d-43ef-a386-894cd9a1944e ro splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable) [ 0.000000] BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000280000000 (usable) [ 0.000000] DMI 2.3 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FE00000000 write-back [ 0.000000] 1 base 0200000000 mask FF80000000 write-back [ 0.000000] 2 base 0080000000 mask FF80000000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7ffd0 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007ffd0000 (usable) [ 0.000000] modified: 000000007ffd0000 - 000000007ffde000 (ACPI data) [ 0.000000] modified: 000000007ffde000 - 0000000080000000 (ACPI NVS) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000280000000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007ffd0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007ffd0000 page 4k [ 0.000000] kernel direct mapping tables up to 7ffd0000 @ 10000-14000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000280000000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0100000000 - 0280000000 page 2M [ 0.000000] kernel direct mapping tables up to 280000000 @ 12000-1d000 [ 0.000000] RAMDISK: 377fa000 - 37fefad8 [ 0.000000] ACPI: RSDP 00000000000f8930 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 000000007ffd0100 0004C (v01 SUPERM OEMXSDT 10000828 MSFT 00000097) [ 0.000000] ACPI: FACP 000000007ffd0290 000F4 (v03 SUPERM OEMFACP 10000828 MSFT 00000097) [ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526) [ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 00000000000044A0/0 (20090903/tbfadt-557) [ 0.000000] ACPI: DSDT 000000007ffd0410 05824 (v01 1ACAI 1ACAI003 00000003 INTL 02002026) [ 0.000000] ACPI: FACS 000000007ffde000 00040 [ 0.000000] ACPI: APIC 000000007ffd0390 00078 (v01 SUPERM OEMAPIC 10000828 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000007ffde040 00073 (v01 SUPERM SMC_OEM 10000828 MSFT 00000097) [ 0.000000] ACPI: SRAT 000000007ffd5c40 00110 (v01 SUPERM OEMSRAT 10000828 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000007ffd5d50 0003C (v01 SUPERM OEMMCFG 10000828 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 1 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 [ 0.000000] SRAT: Node 1 PXM 1 180000000-280000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-180000000 [ 0.000000] SRAT: Node 0 PXM 0 0-9fc00 [ 0.000000] SRAT: PXMs only cover 6142MB of your 8191MB e820 RAM. Not used. [ 0.000000] SRAT: SRAT not used. [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] Number of nodes 2 [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000180000000 [ 0.000000] Node 1 MemBase 0000000180000000 Limit 0000000280000000 [ 0.000000] NUMA: Using 31 for the hash shift. [ 0.000000] Using node hash shift of 31 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000 [ 0.000000] NODE_DATA [0000000000018000 - 000000000001cfff] [ 0.000000] bootmap [000000000001d000 - 000000000004cfff] pages 30 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0180000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a5bc64] TEXT DATA BSS ==> [0001000000 - 0001a5bc64] [ 0.000000] #3 [00377fa000 - 0037fefad8] RAMDISK ==> [00377fa000 - 0037fefad8] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [0001a5c000 - 0001a5c16d] BRK ==> [0001a5c000 - 0001a5c16d] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000018000] PGTABLE ==> [0000012000 - 0000018000] [ 0.000000] Bootmem setup node 1 0000000180000000-0000000280000000 [ 0.000000] NODE_DATA [0000000180000000 - 0000000180004fff] [ 0.000000] bootmap [0000000180005000 - 0000000180024fff] pages 20 [ 0.000000] (8 early reservations) ==> bootmem [0180000000 - 0280000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #2 [0001000000 - 0001a5bc64] TEXT DATA BSS [ 0.000000] #3 [00377fa000 - 0037fefad8] RAMDISK [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved [ 0.000000] #5 [0001a5c000 - 0001a5c16d] BRK [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE [ 0.000000] #7 [0000012000 - 0000018000] PGTABLE [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff880028600000-ffff88002bdfffff] on node 0 [ 0.000000] [ffffea0005400000-ffffea0008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00280000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffd0 [ 0.000000] 0: 0x00100000 -> 0x00180000 [ 0.000000] 1: 0x00180000 -> 0x00280000 [ 0.000000] On node 0 totalpages: 1048415 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 107 pages reserved [ 0.000000] DMA zone: 3820 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 505864 pages, LIFO batch:31 [ 0.000000] Normal zone: 7168 pages used for memmap [ 0.000000] Normal zone: 517120 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 1048576 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1034240 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xdf6fc000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xdf6fc000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 48 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000007ffd0000 - 000000007ffde000 [ 0.000000] PM: Registered nosave memory: 000000007ffde000 - 0000000080000000 [ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff780000 [ 0.000000] PM: Registered nosave memory: 00000000ff780000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91352 r8192 d23336 u1048576 [ 0.000000] pcpu-alloc: s91352 r8192 d23336 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 2 [1] 1 3 [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 2061044 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-16-generic root=UUID=0d99c911-213d-43ef-a386-894cd9a1944e ro splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 643c000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] Memory: 8188088k/10485760k available (5497k kernel code, 2097796k absent, 199876k reserved, 3082k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=2 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:848 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 83886080 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1999.525 MHz processor. [ 0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.05 BogoMIPS (lpj=19995250) [ 0.010132] Security Framework initialized [ 0.010200] AppArmor: AppArmor initialized [ 0.020269] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.026532] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.029435] Mount-cache hash table entries: 256 [ 0.029667] Initializing cgroup subsys ns [ 0.029715] Initializing cgroup subsys cpuacct [ 0.029763] Initializing cgroup subsys memory [ 0.029827] Initializing cgroup subsys devices [ 0.029873] Initializing cgroup subsys freezer [ 0.029919] Initializing cgroup subsys net_cls [ 0.029986] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030005] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.030052] CPU 0/0x0 -> Node 0 [ 0.030096] tseg: 0000000000 [ 0.030115] mce: CPU supports 5 MCE banks [ 0.030171] Performance Events: AMD PMU driver. [ 0.030252] ... version: 0 [ 0.030296] ... bit width: 48 [ 0.030341] ... generic registers: 4 [ 0.030386] ... value mask: 0000ffffffffffff [ 0.030433] ... max period: 00007fffffffffff [ 0.030479] ... fixed-purpose events: 0 [ 0.030524] ... event mask: 000000000000000f [ 0.032511] ACPI: Core revision 20090903 [ 0.042199] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.042250] ftrace: allocating 22932 entries in 90 pages [ 0.049328] Setting APIC routing to flat [ 0.049802] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.149844] CPU0: AMD Opteron(tm) Processor 246 stepping 0a [ 0.150000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.020000] Initializing CPU#1 [ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.020000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.020000] CPU 1/0x1 -> Node 1 [ 0.300073] CPU1: AMD Opteron(tm) Processor 246 stepping 0a [ 0.300369] Brought up 2 CPUs [ 0.300414] Total of 2 processors activated (7999.18 BogoMIPS). [ 0.300696] CPU0 attaching sched-domain: [ 0.300699] domain 0: span 0-1 level NODE [ 0.300702] groups: 0 1 [ 0.300707] CPU1 attaching sched-domain: [ 0.300709] domain 0: span 0-1 level NODE [ 0.300711] groups: 1 0 [ 0.300902] devtmpfs: initialized [ 0.301318] regulator: core version 0.5 [ 0.301386] Time: 22:07:51 Date: 03/11/10 [ 0.301483] NET: Registered protocol family 16 [ 0.301661] node 0 link 0: io port [8000, cfff] [ 0.301665] node 0 link 2: io port [d000, ffff] [ 0.301667] node 0 link 2: io port [5000, 5fff] [ 0.301670] TOM: 0000000080000000 aka 2048M [ 0.301717] node 0 link 0: mmio [ab100000, af3fffff] [ 0.301720] node 0 link 0: mmio [af400000, df4fffff] [ 0.301723] node 0 link 2: mmio [df500000, df6fffff] [ 0.301725] node 0 link 2: mmio [df700000, dfffffff] [ 0.301728] node 0 link 0: mmio [e0000000, e3ffffff] [ 0.301731] node 0 link 2: mmio [e8000000, ebffffff] [ 0.301734] node 0 link 0: mmio [a0000, bffff] [ 0.301737] node 0 link 0: mmio [af3e0000, af3effff] [ 0.301739] TOM2: 0000000280000000 aka 10240M [ 0.301785] bus: [00,04] on node 0 link 0 [ 0.301788] bus: 00 index 0 io port: [6000, cfff] [ 0.301790] bus: 00 index 1 io port: [0, 4fff] [ 0.301792] bus: 00 index 2 mmio: [80000000, df4fffff] [ 0.301794] bus: 00 index 3 mmio: [e0000000, e7ffffff] [ 0.301797] bus: 00 index 4 mmio: [a0000, bffff] [ 0.301799] bus: 00 index 5 mmio: [ec000000, ffffffff] [ 0.301801] bus: 00 index 6 mmio: [280000000, fcffffffff] [ 0.301803] bus: [80,84] on node 0 link 2 [ 0.301806] bus: 80 index 0 io port: [d000, ffff] [ 0.301808] bus: 80 index 1 io port: [5000, 5fff] [ 0.301810] bus: 80 index 2 mmio: [df500000, dfffffff] [ 0.301812] bus: 80 index 3 mmio: [e8000000, ebffffff] [ 0.301820] ACPI: bus type pci registered [ 0.301943] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.301992] PCI: Not using MMCONFIG. [ 0.302036] PCI: Using configuration type 1 for base access [ 0.303037] Trying to unpack rootfs image as initramfs... [ 0.320220] bio: create slab at 0 [ 0.330834] ACPI: EC: Look up EC in DSDT [ 0.334815] ACPI: Executed 1 blocks of module-level executable AML code [ 0.340919] ACPI: Interpreter enabled [ 0.340966] ACPI: (supports S0 S1 S3 S4 S5) [ 0.341198] ACPI: Using IOAPIC for interrupt routing [ 0.341300] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.347391] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.359094] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.372327] ACPI: No dock devices found. [ 0.372629] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.372781] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.372845] pci 0000:00:01.1: reg 10 io port: [0x4cc0-0x4cdf] [ 0.372853] pci 0000:00:01.1: reg 20 io port: [0x4c00-0x4c3f] [ 0.372857] pci 0000:00:01.1: reg 24 io port: [0x4c40-0x4c7f] [ 0.372867] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.372915] pci 0000:00:01.1: PME# disabled [ 0.372981] pci 0000:00:02.0: reg 10 32bit mmio: [0xaf3fc000-0xaf3fcfff] [ 0.372997] pci 0000:00:02.0: supports D1 D2 [ 0.372999] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.373048] pci 0000:00:02.0: PME# disabled [ 0.373109] pci 0000:00:02.1: reg 10 32bit mmio: [0xaf3e0000-0xaf3e00ff] [ 0.373128] pci 0000:00:02.1: supports D1 D2 [ 0.373130] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.373179] pci 0000:00:02.1: PME# disabled [ 0.373251] pci 0000:00:06.0: reg 20 io port: [0x3000-0x300f] [ 0.373274] pci 0000:00:07.0: reg 10 io port: [0xc800-0xc807] [ 0.373278] pci 0000:00:07.0: reg 14 io port: [0xc400-0xc403] [ 0.373282] pci 0000:00:07.0: reg 18 io port: [0xc000-0xc007] [ 0.373285] pci 0000:00:07.0: reg 1c io port: [0xbc00-0xbc03] [ 0.373289] pci 0000:00:07.0: reg 20 io port: [0xb800-0xb80f] [ 0.373293] pci 0000:00:07.0: reg 24 32bit mmio: [0xaf3fe000-0xaf3fefff] [ 0.373315] pci 0000:00:08.0: reg 10 io port: [0xb400-0xb407] [ 0.373319] pci 0000:00:08.0: reg 14 io port: [0xb000-0xb003] [ 0.373323] pci 0000:00:08.0: reg 18 io port: [0xac00-0xac07] [ 0.373326] pci 0000:00:08.0: reg 1c io port: [0xa800-0xa803] [ 0.373330] pci 0000:00:08.0: reg 20 io port: [0xa400-0xa40f] [ 0.373334] pci 0000:00:08.0: reg 24 32bit mmio: [0xaf3fd000-0xaf3fdfff] [ 0.373368] pci 0000:00:0a.0: reg 10 32bit mmio: [0xaf3ff000-0xaf3fffff] [ 0.373372] pci 0000:00:0a.0: reg 14 io port: [0xcc00-0xcc07] [ 0.373387] pci 0000:00:0a.0: supports D1 D2 [ 0.373389] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.373437] pci 0000:00:0a.0: PME# disabled [ 0.373512] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.373560] pci 0000:00:0d.0: PME# disabled [ 0.373636] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.373684] pci 0000:00:0e.0: PME# disabled [ 0.373874] PCI: peer root bus 00 res updated from pci conf [ 0.373923] pci 0000:03:01.0: supports D1 D2 [ 0.373925] pci 0000:03:01.0: PME# supported from D1 D2 D3hot D3cold [ 0.373974] pci 0000:03:01.0: PME# disabled [ 0.374040] pci 0000:03:02.0: reg 10 io port: [0x9800-0x983f] [ 0.374066] pci 0000:03:02.0: supports D1 D2 [ 0.374086] pci 0000:03:02.1: reg 10 io port: [0x9c00-0x9c07] [ 0.374112] pci 0000:03:02.1: supports D1 D2 [ 0.374134] pci 0000:03:02.2: reg 10 32bit mmio: [0xaf2ff800-0xaf2fffff] [ 0.374140] pci 0000:03:02.2: reg 14 32bit mmio: [0xaf2f8000-0xaf2fbfff] [ 0.374165] pci 0000:03:02.2: supports D1 D2 [ 0.374167] pci 0000:03:02.2: PME# supported from D0 D1 D2 D3hot [ 0.374216] pci 0000:03:02.2: PME# disabled [ 0.374290] pci 0000:00:09.0: transparent bridge [ 0.374337] pci 0000:00:09.0: bridge io port: [0x9000-0x9fff] [ 0.374340] pci 0000:00:09.0: bridge 32bit mmio: [0xaf200000-0xaf2fffff] [ 0.374343] pci 0000:00:09.0: bridge 32bit mmio pref: [0xcf400000-0xdf3fffff] [ 0.374381] pci 0000:04:08.0: reg 10 32bit mmio pref: [0xd4000000-0xd7ffffff] [ 0.374445] pci 0000:04:09.0: reg 10 32bit mmio pref: [0xd8000000-0xdbffffff] [ 0.374515] pci 0000:03:01.0: bridge 32bit mmio pref: [0xcf400000-0xdf3fffff] [ 0.374572] pci 0000:01:00.0: reg 10 32bit mmio: [0xae000000-0xaeffffff] [ 0.374579] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xb0000000-0xbfffffff] [ 0.374586] pci 0000:01:00.0: reg 1c 64bit mmio: [0xad000000-0xadffffff] [ 0.374591] pci 0000:01:00.0: reg 24 io port: [0x8c00-0x8c7f] [ 0.374595] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xaf1e0000-0xaf1fffff] [ 0.374641] pci 0000:00:0e.0: bridge io port: [0x8000-0x8fff] [ 0.374644] pci 0000:00:0e.0: bridge 32bit mmio: [0xab100000-0xaf1fffff] [ 0.374648] pci 0000:00:0e.0: bridge 64bit mmio pref: [0xaf400000-0xcf3fffff] [ 0.374658] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.374851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.374978] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.375055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.384479] ACPI: PCI Root Bridge [PCIB] (0000:80) [ 0.384614] pci 0000:80:01.0: reg 14 32bit mmio: [0xdf6fc000-0xdf6fcfff] [ 0.384645] pci 0000:80:07.0: reg 10 io port: [0xf800-0xf807] [ 0.384649] pci 0000:80:07.0: reg 14 io port: [0xf400-0xf403] [ 0.384653] pci 0000:80:07.0: reg 18 io port: [0xf000-0xf007] [ 0.384657] pci 0000:80:07.0: reg 1c io port: [0xec00-0xec03] [ 0.384661] pci 0000:80:07.0: reg 20 io port: [0xe800-0xe80f] [ 0.384665] pci 0000:80:07.0: reg 24 32bit mmio: [0xdf6fe000-0xdf6fefff] [ 0.384686] pci 0000:80:08.0: reg 10 io port: [0xe400-0xe407] [ 0.384690] pci 0000:80:08.0: reg 14 io port: [0xe000-0xe003] [ 0.384694] pci 0000:80:08.0: reg 18 io port: [0xdc00-0xdc07] [ 0.384698] pci 0000:80:08.0: reg 1c io port: [0xd800-0xd803] [ 0.384702] pci 0000:80:08.0: reg 20 io port: [0xd400-0xd40f] [ 0.384706] pci 0000:80:08.0: reg 24 32bit mmio: [0xdf6fd000-0xdf6fdfff] [ 0.384728] pci 0000:80:0a.0: reg 10 32bit mmio: [0xdf6ff000-0xdf6fffff] [ 0.384732] pci 0000:80:0a.0: reg 14 io port: [0xfc00-0xfc07] [ 0.384747] pci 0000:80:0a.0: supports D1 D2 [ 0.384749] pci 0000:80:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.384798] pci 0000:80:0a.0: PME# disabled [ 0.384872] pci 0000:80:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.384920] pci 0000:80:0d.0: PME# disabled [ 0.384993] pci 0000:80:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.385042] pci 0000:80:0e.0: PME# disabled [ 0.385103] PCI: peer root bus 80 res updated from pci conf [ 0.385169] pci 0000:81:00.0: PME# supported from D0 D3hot D3cold [ 0.385217] pci 0000:81:00.0: PME# disabled [ 0.385304] pci 0000:81:00.2: PME# supported from D0 D3hot D3cold [ 0.385352] pci 0000:81:00.2: PME# disabled [ 0.385431] pci 0000:80:0e.0: bridge 32bit mmio: [0xdf500000-0xdf5fffff] [ 0.385435] pci 0000:80:0e.0: bridge 64bit mmio pref: [0xdf700000-0xdfefffff] [ 0.385483] pci 0000:83:0e.0: reg 10 32bit mmio: [0xdf5ff000-0xdf5fffff] [ 0.385493] pci 0000:83:0e.0: reg 18 32bit mmio pref: [0xdf800000-0xdfbfffff] [ 0.385510] pci 0000:83:0e.0: reg 30 32bit mmio pref: [0xdf5e0000-0xdf5effff] [ 0.385531] pci 0000:83:0e.0: supports D1 [ 0.385556] pci 0000:81:00.0: bridge 32bit mmio: [0xdf500000-0xdf5fffff] [ 0.385560] pci 0000:81:00.0: bridge 64bit mmio pref: [0xdf700000-0xdfefffff] [ 0.385608] ACPI: PCI Interrupt Routing Table [\_SB_.PCIB._PRT] [ 0.385763] ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.BR5D._PRT] [ 0.385843] ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.BR5E._PRT] [ 0.387233] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *9 [ 0.387753] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *9 [ 0.388271] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10 [ 0.388794] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *9 [ 0.389273] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. [ 0.389825] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9 [ 0.390286] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0, disabled. [ 0.390806] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *9 [ 0.391291] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *11 [ 0.391777] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled. [ 0.392296] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled. [ 0.392815] ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled. [ 0.393334] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *9 [ 0.393827] ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *5 [ 0.394367] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14 [ 0.394862] ACPI: PCI Interrupt Link [LN2A] (IRQs 40 41 42 43) *0, disabled. [ 0.395421] ACPI: PCI Interrupt Link [LN2B] (IRQs 40 41 42 43) *0, disabled. [ 0.395979] ACPI: PCI Interrupt Link [LN2C] (IRQs 40 41 42 43) *0, disabled. [ 0.396538] ACPI: PCI Interrupt Link [LN2D] (IRQs 40 41 42 43) *0, disabled. [ 0.397097] ACPI: PCI Interrupt Link [LK2N] (IRQs 44 45 46 47) *0, disabled. [ 0.397655] ACPI: PCI Interrupt Link [LT3D] (IRQs 44 45 46 47) *0, disabled. [ 0.398224] ACPI: PCI Interrupt Link [LT2E] (IRQs 44 45 46 47) *0, disabled. [ 0.398693] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.398757] vgaarb: loaded [ 0.398937] SCSI subsystem initialized [ 0.399087] libata version 3.00 loaded. [ 0.399170] usbcore: registered new interface driver usbfs [ 0.399234] usbcore: registered new interface driver hub [ 0.399309] usbcore: registered new device driver usb [ 0.399507] ACPI: WMI: Mapper loaded [ 0.399552] PCI: Using ACPI for IRQ routing [ 0.399794] NetLabel: Initializing [ 0.399839] NetLabel: domain hash size = 128 [ 0.399884] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.399945] NetLabel: unlabeled traffic allowed by default [ 0.400039] Switching to clocksource jiffies [ 0.402037] AppArmor: AppArmor Filesystem Enabled [ 0.402099] pnp: PnP ACPI init [ 0.402153] ACPI: bus type pnp registered [ 0.406665] pnp 00:09: mem resource (0xdfefc000-0xdfefcfff) overlaps 0000:80:0e.0 BAR 15 (0xdf700000-0xdfefffff), disabling [ 0.406727] pnp 00:09: mem resource (0xdfefd000-0xdfefd3ff) overlaps 0000:80:0e.0 BAR 15 (0xdf700000-0xdfefffff), disabling [ 0.406789] pnp 00:09: mem resource (0xdfefe000-0xdfefe3ff) overlaps 0000:80:0e.0 BAR 15 (0xdf700000-0xdfefffff), disabling [ 0.406850] pnp 00:09: mem resource (0xdfeff000-0xdfefffff) overlaps 0000:80:0e.0 BAR 15 (0xdf700000-0xdfefffff), disabling [ 0.406914] pnp 00:09: mem resource (0xdfefc000-0xdfefcfff) overlaps 0000:81:00.0 BAR 15 (0xdf700000-0xdfefffff), disabling [ 0.406975] pnp 00:09: mem resource (0xdfefd000-0xdfefd3ff) overlaps 0000:81:00.0 BAR 15 (0xdf700000-0xdfefffff), disabling [ 0.407036] pnp 00:09: mem resource (0xdfefe000-0xdfefe3ff) overlaps 0000:81:00.0 BAR 15 (0xdf700000-0xdfefffff), disabling [ 0.407097] pnp 00:09: mem resource (0xdfeff000-0xdfefffff) overlaps 0000:81:00.0 BAR 15 (0xdf700000-0xdfefffff), disabling [ 0.410802] pnp: PnP ACPI: found 17 devices [ 0.410848] ACPI: ACPI bus type pnp unregistered [ 0.410908] system 00:09: ioport range 0x190-0x193 has been reserved [ 0.410957] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.411007] system 00:09: iomem range 0xffb80000-0xfffffffe has been reserved [ 0.411057] system 00:09: iomem range 0xfefff000-0xfeffffff has been reserved [ 0.411109] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.411166] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.411226] system 00:0d: ioport range 0x680-0x6ff has been reserved [ 0.411275] system 00:0d: ioport range 0x295-0x296 has been reserved [ 0.411323] system 00:0d: ioport range 0x778-0x77f has been reserved [ 0.411371] system 00:0d: ioport range 0xb78-0xb7f has been reserved [ 0.411419] system 00:0d: ioport range 0xf78-0xf7f has been reserved [ 0.411471] system 00:0e: iomem range 0xe0000000-0xefffffff could not be reserved [ 0.411530] system 00:0f: iomem range 0x0-0x9ffff could not be reserved [ 0.411579] system 00:0f: iomem range 0xc0000-0xdffff has been reserved [ 0.411627] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved [ 0.411677] system 00:0f: iomem range 0x100000-0x7fffffff could not be reserved [ 0.416450] Switching to clocksource acpi_pm [ 0.416807] pci 0000:03:01.0: PCI bridge, secondary bus 0000:04 [ 0.416807] pci 0000:03:01.0: IO window: disabled [ 0.416807] pci 0000:03:01.0: MEM window: disabled [ 0.416807] pci 0000:03:01.0: PREFETCH window: 0xcf400000-0xdf3fffff [ 0.416807] pci 0000:00:09.0: PCI bridge, secondary bus 0000:03 [ 0.416807] pci 0000:00:09.0: IO window: 0x9000-0x9fff [ 0.416807] pci 0000:00:09.0: MEM window: 0xaf200000-0xaf2fffff [ 0.416807] pci 0000:00:09.0: PREFETCH window: 0xcf400000-0xdf3fffff [ 0.416807] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02 [ 0.416807] pci 0000:00:0d.0: IO window: disabled [ 0.416807] pci 0000:00:0d.0: MEM window: disabled [ 0.416807] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.416807] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01 [ 0.416807] pci 0000:00:0e.0: IO window: 0x8000-0x8fff [ 0.416807] pci 0000:00:0e.0: MEM window: 0xab100000-0xaf1fffff [ 0.416807] pci 0000:00:0e.0: PREFETCH window: 0x000000af400000-0x000000cf3fffff [ 0.416807] pci 0000:00:09.0: setting latency timer to 64 [ 0.416807] pci 0000:00:0d.0: setting latency timer to 64 [ 0.416807] pci 0000:00:0e.0: setting latency timer to 64 [ 0.416807] pci 0000:80:0d.0: PCI bridge, secondary bus 0000:84 [ 0.416807] pci 0000:80:0d.0: IO window: disabled [ 0.416807] pci 0000:80:0d.0: MEM window: disabled [ 0.416807] pci 0000:80:0d.0: PREFETCH window: disabled [ 0.416807] pci 0000:81:00.0: PCI bridge, secondary bus 0000:83 [ 0.416807] pci 0000:81:00.0: IO window: disabled [ 0.416807] pci 0000:81:00.0: MEM window: 0xdf500000-0xdf5fffff [ 0.416807] pci 0000:81:00.0: PREFETCH window: 0x000000df700000-0x000000dfefffff [ 0.416807] pci 0000:81:00.2: PCI bridge, secondary bus 0000:82 [ 0.416807] pci 0000:81:00.2: IO window: disabled [ 0.416807] pci 0000:81:00.2: MEM window: disabled [ 0.416807] pci 0000:81:00.2: PREFETCH window: disabled [ 0.416807] pci 0000:80:0e.0: PCI bridge, secondary bus 0000:81 [ 0.416807] pci 0000:80:0e.0: IO window: disabled [ 0.416807] pci 0000:80:0e.0: MEM window: 0xdf500000-0xdf5fffff [ 0.416807] pci 0000:80:0e.0: PREFETCH window: 0x000000df700000-0x000000dfefffff [ 0.416807] pci 0000:80:0d.0: setting latency timer to 64 [ 0.416807] pci 0000:80:0e.0: setting latency timer to 64 [ 0.416807] pci 0000:81:00.0: setting latency timer to 64 [ 0.416807] pci 0000:81:00.2: setting latency timer to 64 [ 0.416807] pci_bus 0000:00: resource 0 io: [0x6000-0xcfff] [ 0.416807] pci_bus 0000:00: resource 1 io: [0x00-0x4fff] [ 0.416807] pci_bus 0000:00: resource 2 mem: [0x80000000-0xdf4fffff] [ 0.416807] pci_bus 0000:00: resource 3 mem: [0xe0000000-0xe7ffffff] [ 0.416807] pci_bus 0000:00: resource 4 mem: [0x0a0000-0x0bffff] [ 0.416807] pci_bus 0000:00: resource 5 mem: [0xec000000-0xffffffff] [ 0.416807] pci_bus 0000:00: resource 6 mem: [0x280000000-0xfcffffffff] [ 0.416807] pci_bus 0000:03: resource 0 io: [0x9000-0x9fff] [ 0.416807] pci_bus 0000:03: resource 1 mem: [0xaf200000-0xaf2fffff] [ 0.416807] pci_bus 0000:03: resource 2 pref mem [0xcf400000-0xdf3fffff] [ 0.416807] pci_bus 0000:03: resource 3 io: [0x6000-0xcfff] [ 0.416807] pci_bus 0000:03: resource 4 io: [0x00-0x4fff] [ 0.416807] pci_bus 0000:03: resource 5 mem: [0x80000000-0xdf4fffff] [ 0.416807] pci_bus 0000:03: resource 6 mem: [0xe0000000-0xe7ffffff] [ 0.416807] pci_bus 0000:03: resource 7 mem: [0x0a0000-0x0bffff] [ 0.416807] pci_bus 0000:03: resource 8 mem: [0xec000000-0xffffffff] [ 0.416807] pci_bus 0000:03: resource 9 mem: [0x280000000-0xfcffffffff] [ 0.416807] pci_bus 0000:04: resource 2 pref mem [0xcf400000-0xdf3fffff] [ 0.416807] pci_bus 0000:01: resource 0 io: [0x8000-0x8fff] [ 0.416807] pci_bus 0000:01: resource 1 mem: [0xab100000-0xaf1fffff] [ 0.416807] pci_bus 0000:01: resource 2 pref mem [0xaf400000-0xcf3fffff] [ 0.416807] pci_bus 0000:80: resource 0 io: [0xd000-0xffff] [ 0.416807] pci_bus 0000:80: resource 1 io: [0x5000-0x5fff] [ 0.416807] pci_bus 0000:80: resource 2 mem: [0xdf500000-0xdfffffff] [ 0.416807] pci_bus 0000:80: resource 3 mem: [0xe8000000-0xebffffff] [ 0.416807] pci_bus 0000:81: resource 1 mem: [0xdf500000-0xdf5fffff] [ 0.416807] pci_bus 0000:81: resource 2 pref mem [0xdf700000-0xdfefffff] [ 0.416807] pci_bus 0000:83: resource 1 mem: [0xdf500000-0xdf5fffff] [ 0.416807] pci_bus 0000:83: resource 2 pref mem [0xdf700000-0xdfefffff] [ 0.416807] NET: Registered protocol family 2 [ 0.416807] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.416807] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.421800] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.422461] TCP: Hash tables configured (established 524288 bind 65536) [ 0.422510] TCP reno registered [ 0.422678] NET: Registered protocol family 1 [ 0.950102] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.950153] pci 0000:00:0d.0: Found disabled HT MSI Mapping [ 0.950204] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.950252] pci 0000:00:0d.0: Linking AER extended capability [ 0.950332] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.950382] pci 0000:00:0e.0: Found disabled HT MSI Mapping [ 0.950434] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.950481] pci 0000:00:0e.0: Linking AER extended capability [ 0.950560] pci 0000:01:00.0: Boot video device [ 0.950608] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 0.950657] pci 0000:80:0d.0: Found disabled HT MSI Mapping [ 0.950709] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 0.950756] pci 0000:80:0d.0: Linking AER extended capability [ 0.950832] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 0.950881] pci 0000:80:0e.0: Found disabled HT MSI Mapping [ 0.950933] pci 0000:80:00.0: Found enabled HT MSI Mapping [ 0.950980] pci 0000:80:0e.0: Linking AER extended capability [ 0.951030] pci 0000:81:00.0: rerouting interrupts for [8086:0370] [ 0.951079] pci 0000:81:00.2: rerouting interrupts for [8086:0372] [ 0.951334] PCI-DMA: Disabling AGP. [ 0.951509] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.951556] PCI-DMA: using GART IOMMU. [ 0.951604] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.952746] Scanning for low memory corruption every 60 seconds [ 0.952969] audit: initializing netlink socket (disabled) [ 0.953029] type=2000 audit(1268345271.950:1): initialized [ 0.963264] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.964929] VFS: Disk quotas dquot_6.5.2 [ 0.965037] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.965835] fuse init (API version 7.13) [ 0.965976] msgmni has been set to 15992 [ 0.966260] alg: No test for stdrng (krng) [ 0.966314] io scheduler noop registered [ 0.966359] io scheduler anticipatory registered [ 0.966405] io scheduler deadline registered [ 0.966490] io scheduler cfq registered (default) [ 0.966728] alloc irq_desc for 48 on node 0 [ 0.966731] alloc kstat_irqs on node 0 [ 0.966740] pcieport 0000:00:0d.0: irq 48 for MSI/MSI-X [ 0.966746] pcieport 0000:00:0d.0: setting latency timer to 64 [ 0.966851] alloc irq_desc for 49 on node 0 [ 0.966853] alloc kstat_irqs on node 0 [ 0.966858] pcieport 0000:00:0e.0: irq 49 for MSI/MSI-X [ 0.966862] pcieport 0000:00:0e.0: setting latency timer to 64 [ 0.967006] alloc irq_desc for 50 on node 0 [ 0.967008] alloc kstat_irqs on node 0 [ 0.967013] pcieport 0000:80:0d.0: irq 50 for MSI/MSI-X [ 0.967017] pcieport 0000:80:0d.0: setting latency timer to 64 [ 0.967123] alloc irq_desc for 51 on node 0 [ 0.967125] alloc kstat_irqs on node 0 [ 0.967130] pcieport 0000:80:0e.0: irq 51 for MSI/MSI-X [ 0.967134] pcieport 0000:80:0e.0: setting latency timer to 64 [ 0.967274] aer 0000:00:0d.0:pcie02: AER service couldn't init device: no _OSC support [ 0.967282] aer 0000:00:0e.0:pcie02: AER service couldn't init device: no _OSC support [ 0.967290] aer 0000:80:0d.0:pcie02: AER service couldn't init device: no _OSC support [ 0.967297] aer 0000:80:0e.0:pcie02: AER service couldn't init device: no _OSC support [ 0.967306] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.967382] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.967563] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.967627] ACPI: Power Button [PWRB] [ 0.967727] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.967783] ACPI: Power Button [PWRF] [ 0.968502] processor LNXCPU:00: registered as cooling_device0 [ 0.968788] processor LNXCPU:01: registered as cooling_device1 [ 0.974967] Linux agpgart interface v0.103 [ 0.975053] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.975190] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.975315] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.975576] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.975732] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.976963] brd: module loaded [ 0.977517] loop: module loaded [ 0.977646] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.978016] sata_nv 0000:00:07.0: version 3.5 [ 0.978404] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22 [ 0.978454] alloc irq_desc for 22 on node 0 [ 0.978456] alloc kstat_irqs on node 0 [ 0.978466] sata_nv 0000:00:07.0: PCI INT A -> Link[LTID] -> GSI 22 (level, low) -> IRQ 22 [ 0.978578] sata_nv 0000:00:07.0: setting latency timer to 64 [ 0.978638] scsi0 : sata_nv [ 0.978755] scsi1 : sata_nv [ 0.978979] ata1: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 22 [ 0.979028] ata2: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 22 [ 0.979520] ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 21 [ 0.979567] alloc irq_desc for 21 on node 0 [ 0.979569] alloc kstat_irqs on node 0 [ 0.979575] sata_nv 0000:00:08.0: PCI INT A -> Link[LTIE] -> GSI 21 (level, low) -> IRQ 21 [ 0.979662] sata_nv 0000:00:08.0: setting latency timer to 64 [ 0.979742] scsi2 : sata_nv [ 0.979847] scsi3 : sata_nv [ 0.980070] ata3: SATA max UDMA/133 cmd 0xb400 ctl 0xb000 bmdma 0xa400 irq 21 [ 0.980120] ata4: SATA max UDMA/133 cmd 0xac00 ctl 0xa800 bmdma 0xa408 irq 21 [ 0.980639] ACPI: PCI Interrupt Link [LT3D] enabled at IRQ 47 [ 0.980687] alloc irq_desc for 47 on node 0 [ 0.980689] alloc kstat_irqs on node 0 [ 0.980693] sata_nv 0000:80:07.0: PCI INT A -> Link[LT3D] -> GSI 47 (level, low) -> IRQ 47 [ 0.980780] sata_nv 0000:80:07.0: setting latency timer to 64 [ 0.980829] scsi4 : sata_nv [ 0.980931] scsi5 : sata_nv [ 0.981147] ata5: SATA max UDMA/133 cmd 0xf800 ctl 0xf400 bmdma 0xe800 irq 47 [ 0.981196] ata6: SATA max UDMA/133 cmd 0xf000 ctl 0xec00 bmdma 0xe808 irq 47 [ 0.981662] ACPI: PCI Interrupt Link [LT2E] enabled at IRQ 46 [ 0.981710] alloc irq_desc for 46 on node 0 [ 0.981712] alloc kstat_irqs on node 0 [ 0.981716] sata_nv 0000:80:08.0: PCI INT A -> Link[LT2E] -> GSI 46 (level, low) -> IRQ 46 [ 0.981801] sata_nv 0000:80:08.0: setting latency timer to 64 [ 0.981848] scsi6 : sata_nv [ 0.981950] scsi7 : sata_nv [ 0.982169] ata7: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xd400 irq 46 [ 0.982219] ata8: SATA max UDMA/133 cmd 0xdc00 ctl 0xd800 bmdma 0xd408 irq 46 [ 0.982431] pata_amd 0000:00:06.0: version 0.4.1 [ 0.982467] pata_amd 0000:00:06.0: setting latency timer to 64 [ 0.982530] scsi8 : pata_amd [ 0.982636] scsi9 : pata_amd [ 0.983993] ata9: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3000 irq 14 [ 0.984042] ata10: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3008 irq 15 [ 0.984830] Fixed MDIO Bus: probed [ 0.984908] PPP generic driver version 2.4.2 [ 0.985007] tun: Universal TUN/TAP device driver, 1.6 [ 0.985053] tun: (C) 1999-2004 Max Krasnyansky [ 0.985203] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.985591] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20 [ 0.985640] alloc irq_desc for 20 on node 0 [ 0.985642] alloc kstat_irqs on node 0 [ 0.985649] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 20 (level, low) -> IRQ 20 [ 0.985717] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.985720] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 0.985806] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 0.985889] ehci_hcd 0000:00:02.1: debug port 1 [ 0.985938] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 0.985953] ehci_hcd 0000:00:02.1: irq 20, io mem 0xaf3e0000 [ 1.000023] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 1.000156] usb usb1: configuration #1 chosen from 1 choice [ 1.000235] hub 1-0:1.0: USB hub found [ 1.000287] hub 1-0:1.0: 10 ports detected [ 1.000396] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.000746] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 [ 1.000795] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, low) -> IRQ 22 [ 1.000863] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 1.000866] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.000946] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 1.001013] ohci_hcd 0000:00:02.0: irq 22, io mem 0xaf3fc000 [ 1.043243] Freeing initrd memory: 8150k freed [ 1.062089] usb usb2: configuration #1 chosen from 1 choice [ 1.062161] hub 2-0:1.0: USB hub found [ 1.062217] hub 2-0:1.0: 10 ports detected [ 1.062316] uhci_hcd: USB Universal Host Controller Interface driver [ 1.062456] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12 [ 1.064786] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.064844] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.065080] mice: PS/2 mouse device common for all mice [ 1.065253] rtc_cmos 00:02: RTC can wake from S4 [ 1.065347] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 1.065418] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 1.065639] device-mapper: uevent: version 1.0.3 [ 1.065802] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.065974] device-mapper: multipath: version 1.1.0 loaded [ 1.066029] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.066321] cpuidle: using governor ladder [ 1.066367] cpuidle: using governor menu [ 1.066851] TCP cubic registered [ 1.067033] NET: Registered protocol family 10 [ 1.067641] lo: Disabled Privacy Extensions [ 1.067993] NET: Registered protocol family 17 [ 1.068082] powernow-k8: Found 2 AMD Opteron(tm) Processor 246 processors (2 cpu cores) (version 2.20.00) [ 1.068159] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 1.068160] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 1.068358] PM: Resume from disk failed. [ 1.068384] registered taskstats version 1 [ 1.068931] Magic number: 2:207:148 [ 1.068998] bdi 1:0: hash matches [ 1.069090] acpi device:19: hash matches [ 1.069188] rtc_cmos 00:02: setting system clock to 2010-03-11 22:07:52 UTC (1268345272) [ 1.069247] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.069294] EDD information not available. [ 1.101960] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.160275] ata9.00: ATAPI: PHILIPS SPD2413P, GP02, max UDMA/66 [ 1.160346] ata9: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (25:900:0x11) [ 1.160350] ata9.00: limited to UDMA/33 due to 40-wire cable [ 1.200213] ata9.00: configured for UDMA/33 [ 1.300017] ata1: SATA link down (SStatus 0 SControl 300) [ 1.310020] ata7: SATA link down (SStatus 0 SControl 300) [ 1.310078] ata3: SATA link down (SStatus 0 SControl 300) [ 1.310136] ata5: SATA link down (SStatus 0 SControl 300) [ 1.320018] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 1.471725] usb 1-3: configuration #1 chosen from 1 choice [ 1.471929] hub 1-3:1.0: USB hub found [ 1.472023] hub 1-3:1.0: 3 ports detected [ 1.630025] ata2: SATA link down (SStatus 0 SControl 300) [ 1.750155] usb 1-3.1: new high speed USB device using ehci_hcd and address 3 [ 1.861698] usb 1-3.1: configuration #1 chosen from 1 choice [ 1.861926] hub 1-3.1:1.0: USB hub found [ 1.862023] hub 1-3.1:1.0: 3 ports detected [ 2.120021] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.140204] ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01104, max UDMA7 [ 2.140254] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.141402] usb 1-3.1.1: new high speed USB device using ehci_hcd and address 4 [ 2.151478] ata4.00: configured for UDMA/133 [ 2.151667] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5 [ 2.151899] sd 3:0:0:0: Attached scsi generic sg0 type 0 [ 2.151923] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.151972] sd 3:0:0:0: [sda] Write Protect is off [ 2.151974] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.151999] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.152188] sda: sda1 [ 2.159099] sd 3:0:0:0: [sda] Attached SCSI disk [ 2.352080] usb 1-3.1.1: configuration #1 chosen from 1 choice [ 2.480021] ata6: SATA link down (SStatus 0 SControl 300) [ 2.810017] ata8: SATA link down (SStatus 0 SControl 300) [ 2.811072] scsi 8:0:0:0: CD-ROM PHILIPS SPD2413P GP02 PQ: 0 ANSI: 5 [ 2.816096] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.816155] Uniform CD-ROM driver Revision: 3.20 [ 2.816308] sr 8:0:0:0: Attached scsi CD-ROM sr0 [ 2.816353] sr 8:0:0:0: Attached scsi generic sg1 type 5 [ 2.980906] Freeing unused kernel memory: 880k freed [ 2.981483] Write protecting the kernel read-only data: 7820k [ 2.998574] udev: starting version 151 [ 3.104092] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 3.104523] ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21 [ 3.104575] forcedeth 0000:00:0a.0: PCI INT A -> Link[LKLN] -> GSI 21 (level, low) -> IRQ 21 [ 3.104634] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 3.104715] nv_probe: set workaround bit for reversed mac addr [ 3.135383] [lbm-drm] Initialized lbm-drm 1.1.0 20060810 [ 3.175097] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 43 [ 3.175153] alloc irq_desc for 43 on node 0 [ 3.175155] alloc kstat_irqs on node 0 [ 3.175165] arcmsr 0000:83:0e.0: PCI INT A -> Link[LN2A] -> GSI 43 (level, low) -> IRQ 43 [ 3.178678] Floppy drive(s): fd0 is 1.44M [ 3.188047] Initializing USB Mass Storage driver... [ 3.190302] ARECA RAID ADAPTER10: FIRMWARE VERSION V1.48 2009-12-31 [ 3.191049] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 [ 3.191100] alloc irq_desc for 19 on node 0 [ 3.191102] alloc kstat_irqs on node 0 [ 3.191114] ohci1394 0000:03:02.2: PCI INT B -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19 [ 3.191495] scsi11 : SCSI emulation for USB Mass Storage devices [ 3.191716] usbcore: registered new interface driver usb-storage [ 3.191890] USB Mass Storage support registered. [ 3.193933] usb-storage: device found at 4 [ 3.193935] usb-storage: waiting for device to settle before scanning [ 3.194697] FDC 0 is a post-1991 82077 [ 3.208872] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18 [ 3.208923] alloc irq_desc for 18 on node 0 [ 3.208925] alloc kstat_irqs on node 0 [ 3.208934] nouveau 0000:01:00.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18 [ 3.208993] nouveau 0000:01:00.0: setting latency timer to 64 [ 3.212099] scsi10 : Areca SATA Host Adapter RAID Controller( RAID6 capable) [ 3.212101] Driver Version 1.20.00.15 2008/02/27 [ 3.214102] [lbm-drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x047200a1) [ 3.214944] [lbm-drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM [ 3.231481] scsi 10:0:0:0: Direct-Access Areca ARC-1220-VOL#00 R001 PQ: 0 ANSI: 5 [ 3.233156] scsi 10:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0 [ 3.235513] sd 10:0:0:0: Attached scsi generic sg2 type 0 [ 3.235790] scsi 10:0:16:0: Attached scsi generic sg3 type 3 [ 3.236170] sd 10:0:0:0: [sdb] 1464843264 512-byte logical blocks: (749 GB/698 GiB) [ 3.236690] sd 10:0:0:0: [sdb] Write Protect is off [ 3.236856] sd 10:0:0:0: [sdb] Mode Sense: cb 00 00 08 [ 3.236915] sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.237387] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 > [ 3.261055] sd 10:0:0:0: [sdb] Attached SCSI disk [ 3.417268] [lbm-drm] nouveau 0000:01:00.0: ... appears to be valid [ 3.417319] [lbm-drm] nouveau 0000:01:00.0: BIT BIOS found [ 3.417366] [lbm-drm] nouveau 0000:01:00.0: Bios version 05.70.02.23 [ 3.417415] [lbm-drm] nouveau 0000:01:00.0: BIT table 'd' not found [ 3.417464] [lbm-drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0 [ 3.417522] [lbm-drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028 [ 3.417579] [lbm-drm] nouveau 0000:01:00.0: Raw DCB entry 1: 03000302 00000000 [ 3.417635] [lbm-drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028 [ 3.417691] [lbm-drm] nouveau 0000:01:00.0: Raw DCB entry 3: 04011312 00000000 [ 3.417748] [lbm-drm] nouveau 0000:01:00.0: Raw DCB entry 4: 020223f1 0040c080 [ 3.417805] [lbm-drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 7 2 [ 3.417862] [lbm-drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 3.417919] [lbm-drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 3.417976] [lbm-drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 3.418033] [lbm-drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff [ 3.418090] [lbm-drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff [ 3.418152] [lbm-drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE188 [ 3.418462] [lbm-drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE60D [ 3.418564] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[af2ff800-af2fffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 3.530038] [lbm-drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEC1F [ 3.530118] [lbm-drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xED80 [ 3.590036] [lbm-drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEE75 [ 3.599640] [TTM] Zone kernel: Available graphics memory: 4098560 kiB. [ 3.599688] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 3.599746] [lbm-drm] nouveau 0000:01:00.0: 256 MiB VRAM [ 3.600687] [lbm-drm] nouveau 0000:01:00.0: 64 MiB GART (aperture) [ 3.600753] mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combining [ 3.600979] [lbm-drm] nouveau 0000:01:00.0: Allocating FIFO number 0 [ 3.602218] [lbm-drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0 [ 3.602292] [lbm-drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0 [ 3.602352] [lbm-drm] nouveau 0000:01:00.0: Saving VGA fonts [ 3.648395] [lbm-drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 3.648659] [lbm-drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 3.648794] [lbm-drm] nouveau 0000:01:00.0: Detected a TV connector [ 3.650170] [lbm-drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0) [ 3.650229] [lbm-drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1) [ 3.650287] [lbm-drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2) [ 3.650344] [lbm-drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 3) [ 3.650402] [lbm-drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 4) [ 3.671276] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 04:4b:80:80:80:03 [ 3.671335] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3 [ 3.680497] ACPI: PCI Interrupt Link [LK2N] enabled at IRQ 45 [ 3.680548] alloc irq_desc for 45 on node 0 [ 3.680550] alloc kstat_irqs on node 0 [ 3.680559] forcedeth 0000:80:0a.0: PCI INT A -> Link[LK2N] -> GSI 45 (level, low) -> IRQ 45 [ 3.680619] forcedeth 0000:80:0a.0: setting latency timer to 64 [ 3.680678] nv_probe: set workaround bit for reversed mac addr [ 3.900929] [lbm-drm] nouveau 0000:01:00.0: allocated 2560x1600 fb: 0x49000, bo ffff88017aaf0e00 [ 3.901061] fb0: nouveaufb frame buffer device [ 3.901111] registered panic notifier [ 3.901159] [lbm-drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 4.220880] forcedeth 0000:80:0a.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 04:4b:80:80:80:04 [ 4.220943] forcedeth 0000:80:0a.0: highdma csum gbit lnktim desc-v3 [ 4.285328] EXT4-fs (sdb5): mounted filesystem with ordered data mode [ 4.731536] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0151113a32] [ 8.195643] usb-storage: device scan complete [ 8.200067] scsi 11:0:0:0: Direct-Access Generic Flash HS-CF 4.49 PQ: 0 ANSI: 0 [ 8.203421] scsi 11:0:0:1: Direct-Access Generic Flash HS-COMBO 4.49 PQ: 0 ANSI: 0 [ 8.204108] sd 11:0:0:0: Attached scsi generic sg4 type 0 [ 8.204252] sd 11:0:0:1: Attached scsi generic sg5 type 0 [ 8.262908] sd 11:0:0:0: [sdc] Attached SCSI removable disk [ 8.266781] sd 11:0:0:1: [sdd] Attached SCSI removable disk [ 10.630238] udev: starting version 151 [ 10.692023] Adding 4095992k swap on /dev/sdb2. Priority:-1 extents:1 across:4095992k [ 10.750603] type=1505 audit(1268345282.180:2): operation="profile_load" pid=521 name="/sbin/dhclient3" [ 10.750891] type=1505 audit(1268345282.180:3): operation="profile_load" pid=521 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 10.751047] type=1505 audit(1268345282.180:4): operation="profile_load" pid=521 name="/usr/lib/connman/scripts/dhclient-script" [ 10.758137] type=1505 audit(1268345282.180:5): operation="profile_load" pid=529 name="/usr/sbin/ntpd" [ 10.921863] Adding 2048276k swap on /dev/sdb3. Priority:-2 extents:1 across:2048276k [ 11.015397] [lbm-drm] TMDS-8: set mode 2560x1600 23 [ 11.025661] [lbm-drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A [ 11.025667] [lbm-drm] nouveau 0000:01:00.0: 0xD58B: Parsing digital output script table [ 11.099408] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 11.141343] [lbm-drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1) [ 11.141350] [lbm-drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A [ 11.143402] Console: switching to colour frame buffer device 320x100 [ 11.165437] EDAC MC: Ver: 2.1.0 Mar 9 2010 [ 11.171939] parport_pc 00:08: reported by Plug and Play ACPI [ 11.171986] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 11.172921] ACPI: I/O resource nForce2_smbus [0x4c00-0x4c3f] conflicts with ACPI region SMRG [0x4c00-0x4c04] [ 11.172952] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.172955] nForce2_smbus 0000:00:01.1: Error probing SMB1. [ 11.173135] i2c i2c-2: nForce2 SMBus adapter at 0x4c40 [ 11.184178] EDAC amd64_edac: Ver: 3.2.0 Mar 9 2010 [ 11.185040] EDAC amd64: ECC is enabled by BIOS. [ 11.185135] EDAC amd64: ECC is enabled by BIOS. [ 11.185183] EDAC MC: Rev E or earlier detected [ 11.185280] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2 [ 11.185283] EDAC MC: Rev E or earlier detected [ 11.185352] EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:19.2 [ 11.185378] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 11.219045] Linux video capture interface: v2.00 [ 11.241167] ppdev: user-space parallel port driver [ 11.266940] gameport: EMU10K1 is pci0000:03:02.1/gameport0, io 0x9c00, speed 1204kHz [ 11.274510] ivtv: Start initialization, version 1.4.1 [ 11.274681] ivtv0: Initializing card 0 [ 11.274687] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 11.274742] ivtv 0000:04:08.0: PCI INT A -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18 [ 11.333569] tveeprom 3-0050: Hauppauge model 23552, rev D492, serial# 7894525 [ 11.333573] tveeprom 3-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57) [ 11.333576] tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08) [ 11.333580] tveeprom 3-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) [ 11.333583] tveeprom 3-0050: audio processor is CX25843 (idx 37) [ 11.333586] tveeprom 3-0050: decoder processor is CX25843 (idx 30) [ 11.333588] tveeprom 3-0050: has radio [ 11.333591] ivtv0: Autodetected WinTV PVR 500 (unit #1) [ 11.369615] cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) [ 11.463454] lp0: using parport0 (interrupt-driven). [ 11.543574] tuner 3-0060: chip found @ 0xc0 (ivtv i2c driver #0) [ 11.543664] tea5767 3-0060: type set to Philips TEA5767HN FM Radio [ 11.569665] tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #0) [ 11.650324] tda9887 3-0043: creating new instance [ 11.650328] tda9887 3-0043: tda988[5/6/7] found [ 11.653390] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 11.659808] wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 11.951448] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 [ 12.160308] tuner-simple 3-0061: creating new instance [ 12.160314] tuner-simple 3-0061: type set to 57 (Philips FQ1236A MK4) [ 12.161336] IRQ 18/ivtv0: IRQF_DISABLED is not guaranteed on shared IRQs [ 12.162282] ivtv0: Registered device video0 for encoder MPG (4096 kB) [ 12.162589] ivtv0: Registered device video32 for encoder YUV (2048 kB) [ 12.162691] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) [ 12.162795] ivtv0: Registered device video24 for encoder PCM (320 kB) [ 12.162893] ivtv0: Registered device radio0 for encoder radio [ 12.162896] ivtv0: Initialized card: WinTV PVR 500 (unit #1) [ 12.163037] ivtv1: Initializing card 1 [ 12.163041] ivtv1: Autodetected Hauppauge card (cx23416 based) [ 12.163426] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 17 [ 12.163433] alloc irq_desc for 17 on node 0 [ 12.163435] alloc kstat_irqs on node 0 [ 12.163446] ivtv 0000:04:09.0: PCI INT A -> Link[LNKD] -> GSI 17 (level, low) -> IRQ 17 [ 12.222235] tveeprom 4-0050: Hauppauge model 23552, rev D492, serial# 7894525 [ 12.222239] tveeprom 4-0050: tuner model is Philips FQ1236A MK4 (idx 92, type 57) [ 12.222242] tveeprom 4-0050: TV standards NTSC(M) (eeprom 0x08) [ 12.222245] tveeprom 4-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) [ 12.222249] tveeprom 4-0050: audio processor is CX25843 (idx 37) [ 12.222251] tveeprom 4-0050: decoder processor is CX25843 (idx 30) [ 12.222254] tveeprom 4-0050: has radio [ 12.222256] ivtv1: Correcting tveeprom data: no radio present on second unit [ 12.222259] ivtv1: Autodetected WinTV PVR 500 (unit #2) [ 12.226069] cx25840 4-0044: cx25 0-21 found @ 0x88 (ivtv i2c driver #1) [ 12.238245] tuner 4-0043: chip found @ 0x86 (ivtv i2c driver #1) [ 12.238336] tda9887 4-0043: creating new instance [ 12.238339] tda9887 4-0043: tda988[5/6/7] found [ 12.243048] tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #1) [ 12.244719] wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #1) [ 12.253439] tuner-simple 4-0061: creating new instance [ 12.253443] tuner-simple 4-0061: type set to 57 (Philips FQ1236A MK4) [ 12.254464] IRQ 17/ivtv1: IRQF_DISABLED is not guaranteed on shared IRQs [ 12.255456] ivtv1: Registered device video1 for encoder MPG (4096 kB) [ 12.255574] ivtv1: Registered device video33 for encoder YUV (2048 kB) [ 12.256118] ivtv1: Registered device vbi1 for encoder VBI (1024 kB) [ 12.256600] ivtv1: Registered device video25 for encoder PCM (320 kB) [ 12.256604] ivtv1: Initialized card: WinTV PVR 500 (unit #2) [ 12.256654] ivtv: End initialization [ 12.305614] EMU10K1_Audigy 0000:03:02.0: PCI INT A -> Link[LNKD] -> GSI 17 (level, low) -> IRQ 17 [ 12.308013] Installing spdif_bug patch: SB Audigy 2 ZS [SB0350] [ 12.784890] RPC: Registered udp transport module. [ 12.784894] RPC: Registered tcp transport module. [ 12.784896] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 12.832400] kjournald starting. Commit interval 5 seconds [ 12.832969] EXT3 FS on sda1, internal journal [ 12.832975] EXT3-fs: mounted filesystem with ordered data mode. [ 12.871284] ivtv 0000:04:09.0: firmware: requesting v4l-cx2341x-enc.fw [ 12.889905] ivtv1: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 12.890041] ivtv 0000:04:08.0: firmware: requesting v4l-cx2341x-enc.fw [ 12.907973] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) [ 12.952808] kjournald starting. Commit interval 5 seconds [ 12.953038] EXT3 FS on sdb11, internal journal [ 12.953045] EXT3-fs: mounted filesystem with ordered data mode. [ 13.081412] ivtv1: Encoder revision: 0x02060039 [ 13.109865] cx25840 4-0044: firmware: requesting v4l-cx23885-avcore-01.fw [ 13.110433] ivtv0: Encoder revision: 0x02060039 [ 13.124053] cx25840 4-0044: firmware load i2c failure [ 13.128390] cx25840 3-0044: firmware: requesting v4l-cx25840.fw [ 13.341035] kjournald starting. Commit interval 5 seconds [ 13.349936] EXT3 FS on sdb7, internal journal [ 13.349949] EXT3-fs: mounted filesystem with ordered data mode. [ 13.534398] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 13.599420] eth1: no link during initialization. [ 13.603872] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 13.686248] type=1505 audit(1268345285.112:6): operation="profile_load" pid=1248 name="/usr/share/gdm/guest-session/Xsession" [ 13.690668] type=1505 audit(1268345285.112:7): operation="profile_load" pid=1250 name="/usr/bin/evince" [ 13.694613] type=1505 audit(1268345285.122:8): operation="profile_load" pid=1250 name="/usr/bin/evince-previewer" [ 13.696287] type=1505 audit(1268345285.122:9): operation="profile_replace" pid=1249 name="/sbin/dhclient3" [ 13.696582] type=1505 audit(1268345285.122:10): operation="profile_replace" pid=1249 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 13.696753] type=1505 audit(1268345285.122:11): operation="profile_replace" pid=1249 name="/usr/lib/connman/scripts/dhclient-script"