[   16.963260] dvb-usb: found a 'Pinnacle PCTV 72e' in cold state, will try to load a firmware
[   16.963274] usb 1-8: firmware: requesting dvb-usb-dib0700-1.20.fw
[   16.991364] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[   18.000064] dib0700: firmware download failed at 7 with -110
[   18.000204] usbcore: registered new interface driver dvb_usb_dib0700
[   27.029620] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   27.029647] hub 1-0:1.0: hub_port_status failed (err = -32)
[   27.237578] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   27.237605] hub 1-0:1.0: hub_port_status failed (err = -32)
[   27.445603] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   27.445627] hub 1-0:1.0: hub_port_status failed (err = -32)
[   27.653605] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   27.653632] hub 1-0:1.0: hub_port_status failed (err = -32)
[   27.857563] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   27.857584] hub 1-0:1.0: hub_port_status failed (err = -32)
[   27.857594] hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
[   27.913547] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   27.913568] hub 1-0:1.0: hub_port_status failed (err = -32)
[   28.117565] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   28.117592] hub 1-0:1.0: hub_port_status failed (err = -32)
[   28.325545] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   28.325566] hub 1-0:1.0: hub_port_status failed (err = -32)
[   28.533569] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   28.533592] hub 1-0:1.0: hub_port_status failed (err = -32)
[   28.737629] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   28.737650] hub 1-0:1.0: hub_port_status failed (err = -32)
[   28.737658] hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
[   28.793691] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   28.793721] hub 1-0:1.0: hub_port_status failed (err = -32)
[   29.001607] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   29.001635] hub 1-0:1.0: hub_port_status failed (err = -32)
[   29.209613] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   29.209636] hub 1-0:1.0: hub_port_status failed (err = -32)
[   29.417612] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   29.417633] hub 1-0:1.0: hub_port_status failed (err = -32)
[   29.625596] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   29.625617] hub 1-0:1.0: hub_port_status failed (err = -32)
[   29.625628] hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
[   29.685655] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   29.685677] hub 1-0:1.0: hub_port_status failed (err = -32)
[   29.897580] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   29.897602] hub 1-0:1.0: hub_port_status failed (err = -32)
[   30.105653] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   30.105677] hub 1-0:1.0: hub_port_status failed (err = -32)
[   30.313634] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   30.313661] hub 1-0:1.0: hub_port_status failed (err = -32)
[   30.521655] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   30.521680] hub 1-0:1.0: hub_port_status failed (err = -32)
[   30.521690] hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
[   30.521736] zd1211rw 1-1:1.0: couldn't reset usb device. Error number -19
[   30.521894] usbcore: registered new interface driver zd1211rw
[   30.522202] usb 1-1: USB disconnect, address 2
[   30.581618] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   30.581642] hub 1-0:1.0: hub_port_status failed (err = -32)
[   30.789698] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   30.789724] hub 1-0:1.0: hub_port_status failed (err = -32)
[   30.997992] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   30.998049] hub 1-0:1.0: hub_port_status failed (err = -32)
[   31.205887] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   31.205940] hub 1-0:1.0: hub_port_status failed (err = -32)
[   31.413618] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   31.413639] hub 1-0:1.0: hub_port_status failed (err = -32)
[   31.413647] hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
[   31.473652] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   31.473681] hub 1-0:1.0: hub_port_status failed (err = -32)
[   31.681615] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   31.681638] hub 1-0:1.0: hub_port_status failed (err = -32)
[   31.889586] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   31.889607] hub 1-0:1.0: hub_port_status failed (err = -32)
[   32.097595] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   32.097615] hub 1-0:1.0: hub_port_status failed (err = -32)
[   32.305572] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   32.305596] hub 1-0:1.0: hub_port_status failed (err = -32)
[   32.305607] hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
[   32.365629] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   32.365655] hub 1-0:1.0: hub_port_status failed (err = -32)
[   32.573609] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   32.573631] hub 1-0:1.0: hub_port_status failed (err = -32)
[   32.777565] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   32.777590] hub 1-0:1.0: hub_port_status failed (err = -32)
[   32.985540] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   32.985563] hub 1-0:1.0: hub_port_status failed (err = -32)
[   33.193773] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   33.193795] hub 1-0:1.0: hub_port_status failed (err = -32)
[   33.193805] hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
[   33.253610] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   33.253631] hub 1-0:1.0: hub_port_status failed (err = -32)
[   33.461577] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   33.461598] hub 1-0:1.0: hub_port_status failed (err = -32)
[   33.665640] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   33.665668] hub 1-0:1.0: hub_port_status failed (err = -32)
[   33.869503] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   33.869518] hub 1-0:1.0: hub_port_status failed (err = -32)
[   34.073489] ehci_hcd 0000:00:1d.7: port 1 reset error -110
[   34.073504] hub 1-0:1.0: hub_port_status failed (err = -32)
[   34.073510] hub 1-0:1.0: Cannot enable port 1.  Maybe the USB cable is bad?
[   34.073532] hub 1-0:1.0: unable to enumerate USB device on port 1
[   34.073560] ehci_hcd 0000:00:1d.7: fatal error
[   34.076010] ehci_hcd 0000:00:1d.7: HC died; cleaning up
[   34.084040] usb 1-8: USB disconnect, address 3
[   34.332051] usb 5-2: new full speed USB device using uhci_hcd and address 2
[   34.475074] usb 5-2: not running at top speed; connect to a high speed hub
[   34.503316] usb 5-2: configuration #1 chosen from 1 choice
[   34.507092] dvb-usb: found a 'Pinnacle PCTV 72e' in cold state, will try to load a firmware
[   34.507108] usb 5-2: firmware: requesting dvb-usb-dib0700-1.20.fw
[   34.513653] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[   36.149069] dib0700: firmware started successfully.
[   36.652054] dvb-usb: found a 'Pinnacle PCTV 72e' in warm state.
[   36.652179] dvb-usb: This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)
[   36.652234] dvb-usb: Pinnacle PCTV 72e error while loading driver (-19)
[   36.764053] usb 2-1: new full speed USB device using uhci_hcd and address 2
[   36.910061] usb 2-1: not running at top speed; connect to a high speed hub
[   36.938296] usb 2-1: configuration #1 chosen from 1 choice
[   37.056068] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[   37.231554] phy0: Selected rate control algorithm 'minstrel'
[   37.234345] zd1211rw 2-1:1.0: phy0
[   37.255099] usb 2-1: firmware: requesting zd1211/zd1211b_ub
[   37.266485] usb 2-1: firmware: requesting zd1211/zd1211b_uphr
[   37.369067] zd1211rw 2-1:1.0: firmware version 4725
[   37.429075] zd1211rw 2-1:1.0: zd1211b chip 0ace:1215 v4810 full 00-1a-9f AL2230_RF pa0 g--NS
[   37.433090] cfg80211: Calling CRDA for country: DE
[   37.438678] cfg80211: Regulatory domain changed to country: DE
[   37.438687] 	(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   37.438695] 	(2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   37.438701] 	(5150000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   37.438707] 	(5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[   37.491535] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   44.893124] wlan0: deauthenticating from 00:22:43:08:47:e6 by local choice (reason=3)
[   44.917066] wlan0: direct probe to AP 00:22:43:08:47:e6 (try 1)
[   44.920185] wlan0: direct probe responded
[   44.920193] wlan0: authenticate with AP 00:22:43:08:47:e6 (try 1)
[   45.120030] wlan0: authenticate with AP 00:22:43:08:47:e6 (try 2)
[   45.123089] wlan0: authenticated
[   45.123133] wlan0: associate with AP 00:22:43:08:47:e6 (try 1)
[   45.135100] wlan0: RX AssocResp from 00:22:43:08:47:e6 (capab=0x431 status=0 aid=1)
[   45.135107] wlan0: associated
[   45.136494] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   45.136641] cfg80211: Calling CRDA for country: NA
[   45.187429] padlock: VIA PadLock not detected.
[   55.956023] wlan0: no IPv6 routers present
[  103.356535] zd1211rw 2-1:1.0: error ioread32(CR_REG1): -110