Howdy , and thanks for dropping me a line. The Drive caddy issue is still of concern to us. We are a pretty low overhead show here, living in a converted school bus, and so we tend to run our equipment until it dies. We have two machines running here , with one being less than a year old and the other being about a decade old, and both experience the same issue. NOTE: Before the older machine was switched over to Linux , it used to run Windows XP, which did support the drive caddy. I have issued the apport-collect -p linux 518608 command on the newer machine and the older one should be issuing the command shortly. Both machines are running Ubuntu 9.10 with the latest updates. I just got an error from the command when running against the newer machine, but I don't think it was on my end as the error was an http server 500 error connecting to launchpad. I'll run it once again just in case, but I did get a bunch of bacon mails, so this second run might be mostly redundant. The older machine stopped at the beginning of the interrogation and did not complete the command, however the machine did not hang. Alas , we don't have a machine to run out of stream updates on, as the machine we would use for such adventures is deadlined right now and the running machines are mission critical to us making a living.. Anyways , thanks all for looking into this issue, as we have many years of data hanging out in those drives that it would be nice to have access to again. --Doc On Sun, 2010-04-25 at 05:10 +0000, Jeremy Foshee wrote: > Hi Dr., > > This bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? Can you try with the latest development release of Ubuntu? ISO CD images are available from http://cdimage.ubuntu.com/releases/ . > > f it remains an issue, could you run the following command from a Terminal (Applications->Accessories->Terminal). It will automatically gather and attach updated debug information to this report. > > apport-collect -p linux 518608 > > Also, if you could test the latest upstream kernel available that would be great. It will allow additional upstream developers to examine the issue. Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Once you've tested the upstream kernel, please remove the 'needs-upstream-testing' tag. This can be done by clicking on the yellow pencil icon next to the tag located at the bottom of the bug description and deleting the 'needs-upstream-testing' text. Please let us know your results. > > Thanks in advance. > > [This is an automated message. Apologies if it has reached you inappropriately; please just reply to this message indicating so.] > > > ** Tags added: needs-kernel-logs > > ** Tags added: needs-upstream-testing > > ** Tags added: kj-triage > > ** Changed in: linux (Ubuntu) > Status: New => Incomplete > > -- > unable to mount ID 04ce:0002 ScanLogic Corp. SL11R-IDE IDE Bridge > https://bugs.launchpad.net/bugs/518608 > You received this bug notification because you are a direct subscriber > of the bug. > > Status in “linux” package in Ubuntu: Incomplete > > Bug description: > While looking at the existing bugs , I was not able to positively > identify similar bug as being exactly my bug , #336189 was very similar > and in fact *may* be the same problem. > > uname -a: > Linux oem-desktop 2.6.31-19-generic #56-Ubuntu SMP Thu Jan 28 01:26:53 UTC 2010 i686 GNU/Linux > > /proc/version_signature : > Ubuntu 2.6.31-19.56-generic > > dmesg: > [19815.432119] usb 3-2: new full speed USB device using uhci_hcd and address 6 > [19815.612494] usb 3-2: configuration #1 chosen from 1 choice > [19815.621124] scsi6 : SCSI emulation for USB Mass Storage devices > [19815.641282] usb-storage: device found at 6 > [19815.641290] usb-storage: waiting for device to settle before scanning > [19820.642496] usb-storage: device scan complete > [19820.756113] usb 3-2: reset full speed USB device using uhci_hcd and address 6 > [19821.016139] usb 3-2: reset full speed USB device using uhci_hcd and address 6 > [19821.276094] usb 3-2: reset full speed USB device using uhci_hcd and address 6 > [19821.536114] usb 3-2: reset full speed USB device using uhci_hcd and address 6 > > > sudo lspci -vnvn: > > 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) > Subsystem: Device [1b89:2070] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Capabilities: [e0] Vendor Specific Information > Kernel driver in use: agpgart-intel > Kernel modules: intel-agp > > 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) > Subsystem: Device [1b89:2070] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at fe980000 (32-bit, non-prefetchable) [size=512K] > Region 1: I/O ports at dc80 [size=8] > Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] > Region 3: Memory at fe940000 (32-bit, non-prefetchable) [size=256K] > Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- > Address: 00000000 Data: 0000 > Capabilities: [d0] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: i915 > Kernel modules: i915 > > 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) > Subsystem: Device [1b89:2070] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Region 0: Memory at fe880000 (32-bit, non-prefetchable) [size=512K] > Capabilities: [d0] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) > Subsystem: Device [1b89:2070] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at fe938000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us > ClockPM- Suprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- > Capabilities: [100] Virtual Channel > Capabilities: [130] Root Complex Link > Kernel driver in use: HDA Intel > Kernel modules: snd-hda-intel > > 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: fea00000-feafffff > Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ > Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- PresDet+ LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 4159 > Capabilities: [90] Subsystem: Device [1b89:2070] > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Virtual Channel > Capabilities: [180] Root Complex Link > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > Memory behind bridge: feb00000-febfffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us > ClockPM- Suprise- LLActRep+ BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ > Slot # 0, PowerLimit 0.000000; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- PresDet+ LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ > Address: fee0300c Data: 4161 > Capabilities: [90] Subsystem: Device [1b89:2070] > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Virtual Channel > Capabilities: [180] Root Complex Link > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) > Subsystem: Device [1b89:2070] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin A routed to IRQ 23 > Region 4: I/O ports at dc00 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) > Subsystem: Device [1b89:2070] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin B routed to IRQ 19 > Region 4: I/O ports at d880 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) > Subsystem: Device [1b89:2070] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin C routed to IRQ 18 > Region 4: I/O ports at d800 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) > Subsystem: Device [1b89:2070] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin D routed to IRQ 16 > Region 4: I/O ports at d480 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20) > Subsystem: Device [1b89:2070] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin A routed to IRQ 23 > Region 0: Memory at fe937c00 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port: BAR=1 offset=00a0 > Kernel driver in use: ehci_hcd > > 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Subsystem: Device [1b89:2070] > > 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) > Subsystem: Device [1b89:2070] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Capabilities: [e0] Vendor Specific Information > Kernel modules: iTCO_wdt, intel-rng > > 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master]) > Subsystem: Device [1b89:2070] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin B routed to IRQ 19 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: I/O ports at ffa0 [size=16] > Capabilities: [70] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: ata_piix > > 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02) > Subsystem: Device [1b89:2070] > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin B routed to IRQ 3 > Region 4: I/O ports at 0400 [size=32] > Kernel modules: i2c-i801 > > 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) > Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 26 > Region 0: I/O ports at ec00 [size=256] > Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K] > Region 4: Memory at fdff0000 (64-bit, prefetchable) [size=64K] > Expansion ROM at feac0000 [disabled] [size=128K] > Capabilities: [40] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ > Address: 00000000fee0300c Data: 4181 > Capabilities: [70] Express (v1) Endpoint, MSI 01 > DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <8us > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 4096 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us > ClockPM+ Suprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2 > Vector table: BAR=4 offset=00000000 > PBA: BAR=4 offset=00000800 > Capabilities: [d0] Vital Product Data > Capabilities: [100] Advanced Error Reporting > Capabilities: [140] Virtual Channel > Capabilities: [160] Device Serial Number 81-68-10-ec-00-00-00-00 > Kernel driver in use: r8169 > Kernel modules: r8169 > > 02:00.0 Network controller [0280]: Intel Corporation Wireless WiFi Link 5100 [8086:4232] > Subsystem: Intel Corporation Device [8086:1201] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 27 > Region 0: Memory at febfe000 (64-bit, non-prefetchable) [size=8K] > Capabilities: [c8] Power Management version 3 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ > Address: 00000000fee0300c Data: 4189 > Capabilities: [e0] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <32us > ClockPM+ Suprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > Capabilities: [100] Advanced Error Reporting > Capabilities: [140] Device Serial Number 94-9c-53-ff-ff-65-1e-00 > Kernel driver in use: iwlagn > Kernel modules: iwlagn > > ProblemType: Bug > Architecture: i386 > AudioDevicesInUse: > USER PID ACCESS COMMAND > /dev/snd/controlC0: drclue 2052 F.... pulseaudio > /dev/snd/pcmC0D0p: drclue 2052 F...m pulseaudio > /dev/snd/controlC1: drclue 2052 F.... pulseaudio > CRDA: Error: [Errno 2] No such file or directory > Card0.Amixer.info: > Card hw:0 'Intel'/'HDA Intel at 0xfe938000 irq 16' > Mixer name : 'Realtek ALC662 rev1' > Components : 'HDA:10ec0662,1b890000,00100101' > Controls : 18 > Simple ctrls : 12 > Card1.Amixer.info: > Card hw:1 'Headset'/'Logitech Logitech Wireless Headset at usb-0000:00:1d.0-1, full speed' > Mixer name : 'USB Mixer' > Components : 'USB046d:0a12' > Controls : 4 > Simple ctrls : 2 > Date: Sun Feb 7 14:18:44 2010 > DistroRelease: Ubuntu 9.10 > HibernationDevice: RESUME=UUID=61b08c20-dfc5-4455-a7c0-d9ae8af934f3 > MachineType: Quanmax Inc. QutePC-1000 > Package: linux-image-2.6.31-19-generic 2.6.31-19.56 > ProcCmdLine: root=UUID=eb972027-773b-4dc4-b420-16e793ce7ea4 ro quiet splash > ProcEnviron: > PATH=(custom, user) > LANG=en_US.UTF-8 > SHELL=/bin/bash > ProcVersionSignature: Ubuntu 2.6.31-19.56-generic > RelatedPackageVersions: > linux-backports-modules-2.6.31-19-generic N/A > linux-firmware 1.25 > RfKill: > 0: phy0: Wireless LAN > Soft blocked: no > Hard blocked: no > SourcePackage: linux > Uname: Linux 2.6.31-19-generic i686 > WpaSupplicantLog: > > dmi.bios.date: 09/18/2009 > dmi.bios.vendor: American Megatrends Inc. > dmi.bios.version: 1.8 > dmi.board.asset.tag: To Be Filled By O.E.M. > dmi.board.name: QutePC-1000 > dmi.board.vendor: Quanmax Inc. > dmi.board.version: B1 > dmi.chassis.asset.tag: To Be Filled By O.E.M. > dmi.chassis.type: 3 > dmi.chassis.vendor: Quanmax Inc. > dmi.chassis.version: B1 > dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.8:bd09/18/2009:svnQuanmaxInc.:pnQutePC-1000:pvrB1:rvnQuanmaxInc.:rnQutePC-1000:rvrB1:cvnQuanmaxInc.:ct3:cvrB1: > dmi.product.name: QutePC-1000 > dmi.product.version: B1 > dmi.sys.vendor: Quanmax Inc. > > To unsubscribe from this bug, go to: > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/518608/+subscribe