[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-14-generic (buildd@crested) (gcc version 4.4.3 (Ubuntu 4.4.3-2ubuntu2) ) #20-Ubuntu SMP Sat Feb 20 05:18:19 UTC 2010 (Ubuntu 2.6.32-14.20-generic) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-14-generic root=UUID=ca493480-1554-43b7-b300-4fb6b603e39b ro quiet splash [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.3 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-CFFFF uncachable [ 0.000000] D0000-D7FFF write-back [ 0.000000] D8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 00D0000000 mask FFF0000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] modified: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] modified: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007fff0000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 7fff0000 @ 10000-14000 [ 0.000000] RAMDISK: 37741000 - 37fefe9e [ 0.000000] ACPI: RSDP 00000000000f8ca0 00014 (v00 VIAK8M) [ 0.000000] ACPI: RSDT 000000007fff3040 0002C (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 000000007fff30c0 00074 (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 000000007fff3180 05139 (v01 VIAK8M AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS 000000007fff0000 00040 [ 0.000000] ACPI: APIC 000000007fff8300 0005A (v01 VIAK8M AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fff0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000 [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 0000000000026fff] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001a6ef24] TEXT DATA BSS ==> [0001000000 - 0001a6ef24] [ 0.000000] #3 [0037741000 - 0037fefe9e] RAMDISK ==> [0037741000 - 0037fefe9e] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0001a6f000 - 0001a6f0b6] BRK ==> [0001a6f000 - 0001a6f0b6] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] found SMP MP-table at [ffff8800000f4e30] f4e30 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880002000000-ffff880003bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fff0 [ 0.000000] On node 0 totalpages: 524159 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 101 pages reserved [ 0.000000] DMA zone: 3826 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7112 pages used for memmap [ 0.000000] DMA32 zone: 513064 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91352 r8192 d23336 u2097152 [ 0.000000] pcpu-alloc: s91352 r8192 d23336 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516890 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-14-generic root=UUID=ca493480-1554-43b7-b300-4fb6b603e39b ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] AGP bridge at 00:00:00 [ 0.000000] Aperture from AGP @ d0000000 old size 32 MB [ 0.000000] Aperture from AGP @ d0000000 size 256 MB (APSIZE f00) [ 0.000000] Node 0: aperture @ d0000000 size 256 MB [ 0.000000] Memory: 2048100k/2097088k available (5528k kernel code, 452k absent, 48536k reserved, 3130k data, 880k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:256 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 20971520 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2399.912 MHz processor. [ 0.020007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.82 BogoMIPS (lpj=23999120) [ 0.020046] Security Framework initialized [ 0.020079] AppArmor: AppArmor initialized [ 0.020277] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.022548] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.023667] Mount-cache hash table entries: 256 [ 0.030056] Initializing cgroup subsys ns [ 0.030061] Initializing cgroup subsys cpuacct [ 0.030065] Initializing cgroup subsys memory [ 0.030080] Initializing cgroup subsys devices [ 0.030083] Initializing cgroup subsys freezer [ 0.030085] Initializing cgroup subsys net_cls [ 0.030112] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030115] CPU: L2 Cache: 512K (64 bytes/line) [ 0.030118] CPU 0/0x0 -> Node 0 [ 0.030120] tseg: 0000000000 [ 0.030142] mce: CPU supports 5 MCE banks [ 0.030159] Performance Events: AMD PMU driver. [ 0.030166] ... version: 0 [ 0.030167] ... bit width: 48 [ 0.030169] ... generic registers: 4 [ 0.030171] ... value mask: 0000ffffffffffff [ 0.030173] ... max period: 00007fffffffffff [ 0.030174] ... fixed-purpose events: 0 [ 0.030176] ... event mask: 000000000000000f [ 0.030191] SMP alternatives: switching to UP code [ 0.040154] Freeing SMP alternatives: 40k freed [ 0.040196] ACPI: Core revision 20090903 [ 0.048045] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.048061] ftrace: allocating 23001 entries in 91 pages [ 0.050144] Setting APIC routing to flat [ 0.050973] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.155286] CPU0: AMD Athlon(tm) 64 Processor 3400+ stepping 00 [ 0.160000] Brought up 1 CPUs [ 0.160000] Total of 1 processors activated (4799.82 BogoMIPS). [ 0.160000] CPU0 attaching NULL sched-domain. [ 0.160000] devtmpfs: initialized [ 0.160000] regulator: core version 0.5 [ 0.160000] Time: 12:28:44 Date: 02/21/10 [ 0.160000] NET: Registered protocol family 16 [ 0.160000] node 0 link 0: io port [1000, fffff] [ 0.160000] TOM: 0000000080000000 aka 2048M [ 0.160000] node 0 link 0: mmio [a0000, bffff] [ 0.160000] node 0 link 0: mmio [80000000, ff70ffff] [ 0.160000] bus: [00,ff] on node 0 link 0 [ 0.160000] bus: 00 index 0 io port: [0, ffff] [ 0.160000] bus: 00 index 1 mmio: [a0000, bffff] [ 0.160000] bus: 00 index 2 mmio: [80000000, fcffffffff] [ 0.160000] ACPI: bus type pci registered [ 0.160000] PCI: Using configuration type 1 for base access [ 0.160000] bio: create slab at 0 [ 0.160000] ACPI: EC: Look up EC in DSDT [ 0.160000] ACPI Warning: Package List length (0x6) larger than NumElements count (0x5), truncated [ 0.160000] (20090903/dsobject-515) [ 0.160000] ACPI: Interpreter enabled [ 0.160000] ACPI: (supports S0 S1 S3 S4 S5) [ 0.160000] ACPI: Using IOAPIC for interrupt routing [ 0.163427] ACPI: No dock devices found. [ 0.163535] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.163585] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.163814] pci 0000:00:01.0: supports D1 [ 0.163848] pci 0000:00:09.0: reg 10 32bit mmio: [0xf3000000-0xf30007ff] [ 0.163882] pci 0000:00:09.0: supports D1 D2 [ 0.163914] pci 0000:00:0f.0: reg 10 io port: [0xe000-0xe007] [ 0.163919] pci 0000:00:0f.0: reg 14 io port: [0xe100-0xe103] [ 0.163925] pci 0000:00:0f.0: reg 18 io port: [0xe200-0xe207] [ 0.163930] pci 0000:00:0f.0: reg 1c io port: [0xe300-0xe303] [ 0.163936] pci 0000:00:0f.0: reg 20 io port: [0xe400-0xe40f] [ 0.163941] pci 0000:00:0f.0: reg 24 io port: [0xe500-0xe5ff] [ 0.163998] pci 0000:00:0f.1: reg 20 io port: [0xe600-0xe60f] [ 0.164064] pci 0000:00:10.0: reg 20 io port: [0xe700-0xe71f] [ 0.164084] pci 0000:00:10.0: supports D1 D2 [ 0.164086] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.164090] pci 0000:00:10.0: PME# disabled [ 0.164130] pci 0000:00:10.1: reg 20 io port: [0xe800-0xe81f] [ 0.164150] pci 0000:00:10.1: supports D1 D2 [ 0.164152] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.164156] pci 0000:00:10.1: PME# disabled [ 0.164194] pci 0000:00:10.2: reg 20 io port: [0xe900-0xe91f] [ 0.164214] pci 0000:00:10.2: supports D1 D2 [ 0.164216] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.164219] pci 0000:00:10.2: PME# disabled [ 0.164258] pci 0000:00:10.3: reg 20 io port: [0xea00-0xea1f] [ 0.164278] pci 0000:00:10.3: supports D1 D2 [ 0.164280] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.164283] pci 0000:00:10.3: PME# disabled [ 0.164310] pci 0000:00:10.4: reg 10 32bit mmio: [0xf3001000-0xf30010ff] [ 0.164342] pci 0000:00:10.4: supports D1 D2 [ 0.164344] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.164347] pci 0000:00:10.4: PME# disabled [ 0.164397] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.164441] pci 0000:00:11.5: reg 10 io port: [0xeb00-0xebff] [ 0.164474] pci 0000:00:11.5: supports D1 D2 [ 0.164504] pci 0000:00:12.0: reg 10 io port: [0xec00-0xecff] [ 0.164509] pci 0000:00:12.0: reg 14 32bit mmio: [0xf3002000-0xf30020ff] [ 0.164540] pci 0000:00:12.0: supports D1 D2 [ 0.164542] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.164545] pci 0000:00:12.0: PME# disabled [ 0.164633] pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf0ffffff] [ 0.164637] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.164641] pci 0000:01:00.0: reg 18 32bit mmio: [0xf1000000-0xf1ffffff] [ 0.164651] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.164690] pci 0000:00:01.0: bridge 32bit mmio: [0xf0000000-0xf2ffffff] [ 0.164693] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.164703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.212136] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) [ 0.212284] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [ 0.212433] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12) [ 0.212561] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.212687] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.212807] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.212926] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.213045] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 0.213207] ACPI: PCI Interrupt Link [ALKA] (IRQs *20) [ 0.213356] ACPI: PCI Interrupt Link [ALKB] (IRQs *21) [ 0.213505] ACPI: PCI Interrupt Link [ALKC] (IRQs *22) [ 0.213691] ACPI: PCI Interrupt Link [ALKD] (IRQs *23) [ 0.213804] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.213806] vgaarb: loaded [ 0.213939] SCSI subsystem initialized [ 0.214052] libata version 3.00 loaded. [ 0.214131] usbcore: registered new interface driver usbfs [ 0.214144] usbcore: registered new interface driver hub [ 0.214174] usbcore: registered new device driver usb [ 0.214287] ACPI: WMI: Mapper loaded [ 0.214289] PCI: Using ACPI for IRQ routing [ 0.214300] pci 0000:00:00.0: BAR 0: address space collision on of device [0xd0000000-0xdfffffff] [ 0.214303] pci 0000:00:00.0: BAR 0: can't allocate resource [ 0.214452] NetLabel: Initializing [ 0.214453] NetLabel: domain hash size = 128 [ 0.214455] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.214472] NetLabel: unlabeled traffic allowed by default [ 0.214508] Switching to clocksource tsc [ 0.216369] AppArmor: AppArmor Filesystem Enabled [ 0.216402] pnp: PnP ACPI init [ 0.216432] ACPI: bus type pnp registered [ 0.216805] pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling [ 0.216808] pnp 00:00: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling [ 0.216811] pnp 00:00: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling [ 0.216814] pnp 00:00: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling [ 0.216818] pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling [ 0.216821] pnp 00:00: mem resource (0x100000-0x7ffeffff) overlaps 0000:00:00.0 BAR 0 (0x0-0xfffffff), disabling [ 0.219926] pnp: PnP ACPI: found 12 devices [ 0.219928] ACPI: ACPI bus type pnp unregistered [ 0.219942] system 00:00: iomem range 0x7fff0000-0x7fffffff could not be reserved [ 0.219945] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved [ 0.219948] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.219950] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.219953] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.219960] system 00:02: ioport range 0x4000-0x407f has been reserved [ 0.219962] system 00:02: ioport range 0x5000-0x500f has been reserved [ 0.219967] system 00:03: ioport range 0xb78-0xb7b has been reserved [ 0.219970] system 00:03: ioport range 0xf78-0xf7b has been reserved [ 0.219972] system 00:03: ioport range 0xa78-0xa7b has been reserved [ 0.219974] system 00:03: ioport range 0xe78-0xe7b has been reserved [ 0.219977] system 00:03: ioport range 0xbbc-0xbbf has been reserved [ 0.219979] system 00:03: ioport range 0xfbc-0xfbf has been reserved [ 0.219982] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 0.219995] system 00:03: ioport range 0x290-0x297 has been reserved [ 0.220184] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.220186] pci 0000:00:01.0: IO window: disabled [ 0.220191] pci 0000:00:01.0: MEM window: 0xf0000000-0xf2ffffff [ 0.220195] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xefffffff [ 0.220210] pci 0000:00:01.0: setting latency timer to 64 [ 0.220216] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.220218] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.220221] pci_bus 0000:01: resource 1 mem: [0xf0000000-0xf2ffffff] [ 0.220223] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.220268] NET: Registered protocol family 2 [ 0.220401] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.221456] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.225982] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.227085] TCP: Hash tables configured (established 262144 bind 65536) [ 0.227088] TCP reno registered [ 0.227220] NET: Registered protocol family 1 [ 0.227255] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.227351] pci 0000:01:00.0: Boot video device [ 0.227521] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0204] [ 0.236231] Trying to unpack rootfs image as initramfs... [ 0.245590] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.245805] Scanning for low memory corruption every 60 seconds [ 0.245957] audit: initializing netlink socket (disabled) [ 0.245974] type=2000 audit(1266755324.245:1): initialized [ 0.265920] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.267256] VFS: Disk quotas dquot_6.5.2 [ 0.267305] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.267925] fuse init (API version 7.13) [ 0.267999] msgmni has been set to 4000 [ 0.275645] alg: No test for stdrng (krng) [ 0.275672] io scheduler noop registered [ 0.275674] io scheduler anticipatory registered [ 0.275676] io scheduler deadline registered [ 0.275783] io scheduler cfq registered (default) [ 0.275945] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.275965] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.276071] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.276076] ACPI: Power Button [PWRB] [ 0.276126] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.276128] ACPI: Power Button [PWRF] [ 0.276180] fan PNP0C0B:00: registered as cooling_device0 [ 0.276186] ACPI: Fan [FAN] (on) [ 0.276471] processor LNXCPU:00: registered as cooling_device1 [ 0.279553] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.279562] ACPI: Thermal Zone [THRM] (42 C) [ 0.280825] Linux agpgart interface v0.103 [ 0.280863] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.280966] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.281058] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.281298] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.281405] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.282297] brd: module loaded [ 0.282708] loop: module loaded [ 0.282801] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.285550] pata_via 0000:00:0f.1: version 0.3.4 [ 0.285841] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 [ 0.285847] alloc irq_desc for 20 on node 0 [ 0.285850] alloc kstat_irqs on node 0 [ 0.285861] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 0.295713] scsi0 : pata_via [ 0.295911] scsi1 : pata_via [ 0.297393] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe600 irq 14 [ 0.297396] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe608 irq 15 [ 0.297717] pata_acpi 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 0.297783] pata_acpi 0000:00:0f.0: PCI INT B disabled [ 0.298101] Fixed MDIO Bus: probed [ 0.298135] PPP generic driver version 2.4.2 [ 0.298209] tun: Universal TUN/TAP device driver, 1.6 [ 0.298211] tun: (C) 1999-2004 Max Krasnyansky [ 0.298305] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.298573] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 [ 0.298578] alloc irq_desc for 21 on node 0 [ 0.298580] alloc kstat_irqs on node 0 [ 0.298589] ehci_hcd 0000:00:10.4: PCI INT C -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.298609] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 0.298645] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 0.298723] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf3001000 [ 0.315672] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 0.315846] usb usb1: configuration #1 chosen from 1 choice [ 0.315879] hub 1-0:1.0: USB hub found [ 0.315892] hub 1-0:1.0: 8 ports detected [ 0.316000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.316029] uhci_hcd: USB Universal Host Controller Interface driver [ 0.325612] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.325630] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.325738] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.325770] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e700 [ 0.325903] usb usb2: configuration #1 chosen from 1 choice [ 0.325938] hub 2-0:1.0: USB hub found [ 0.325948] hub 2-0:1.0: 2 ports detected [ 0.326081] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.326087] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.326127] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.326146] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e800 [ 0.326238] usb usb3: configuration #1 chosen from 1 choice [ 0.326260] hub 3-0:1.0: USB hub found [ 0.326268] hub 3-0:1.0: 2 ports detected [ 0.326339] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.326345] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.326374] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.326394] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e900 [ 0.326489] usb usb4: configuration #1 chosen from 1 choice [ 0.326511] hub 4-0:1.0: USB hub found [ 0.326520] hub 4-0:1.0: 2 ports detected [ 0.326591] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21 [ 0.326596] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 0.326625] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 0.326647] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000ea00 [ 0.326750] usb usb5: configuration #1 chosen from 1 choice [ 0.326772] hub 5-0:1.0: USB hub found [ 0.326779] hub 5-0:1.0: 2 ports detected [ 0.326874] PNP: No PS/2 controller found. Probing ports directly. [ 0.462977] Freeing initrd memory: 8891k freed [ 0.475933] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H20N, 1.02, max UDMA/33 [ 0.515803] ata1.00: configured for UDMA/33 [ 0.518616] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H20N 1.02 PQ: 0 ANSI: 5 [ 0.523709] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.523713] Uniform CD-ROM driver Revision: 3.20 [ 0.523844] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.523919] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.523955] ata2: port disabled. ignoring. [ 0.575551] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.575641] mice: PS/2 mouse device common for all mice [ 0.575746] rtc_cmos 00:05: RTC can wake from S4 [ 0.575800] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.575851] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.575980] device-mapper: uevent: version 1.0.3 [ 0.576188] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.576238] device-mapper: multipath: version 1.1.0 loaded [ 0.576241] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.576368] cpuidle: using governor ladder [ 0.576370] cpuidle: using governor menu [ 0.576738] TCP cubic registered [ 0.576849] NET: Registered protocol family 10 [ 0.577276] lo: Disabled Privacy Extensions [ 0.577527] NET: Registered protocol family 17 [ 0.577558] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ processors (1 cpu cores) (version 2.20.00) [ 0.577622] powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x2 [ 0.577624] powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x6 [ 0.577626] powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa [ 0.577628] powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xe [ 0.577630] powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 [ 0.577754] PM: Resume from disk failed. [ 0.577769] registered taskstats version 1 [ 0.578058] Magic number: 14:749:481 [ 0.578166] rtc_cmos 00:05: setting system clock to 2010-02-21 12:28:45 UTC (1266755325) [ 0.578168] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.578170] EDD information not available. [ 0.578227] Freeing unused kernel memory: 880k freed [ 0.579004] Write protecting the kernel read-only data: 7888k [ 0.599976] udev: starting version 151 [ 0.810857] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 0.810863] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 0.813763] sata_via 0000:00:0f.0: version 2.4 [ 0.813785] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 [ 0.813837] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 0.814821] scsi2 : sata_via [ 0.814987] scsi3 : sata_via [ 0.815029] ata3: SATA max UDMA/133 cmd 0xe000 ctl 0xe100 bmdma 0xe400 irq 20 [ 0.815032] ata4: SATA max UDMA/133 cmd 0xe200 ctl 0xe300 bmdma 0xe408 irq 20 [ 0.815633] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 [ 0.815640] alloc irq_desc for 23 on node 0 [ 0.815642] alloc kstat_irqs on node 0 [ 0.815651] via-rhine 0000:00:12.0: PCI INT A -> Link[ALKD] -> GSI 23 (level, low) -> IRQ 23 [ 0.816277] eth0: VIA Rhine II at 0xf3002000, 00:16:17:39:91:0d, IRQ 23. [ 0.816985] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. [ 0.819345] FDC 0 is a post-1991 82077 [ 0.915404] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 1.015397] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.092734] usb 2-2: configuration #1 chosen from 1 choice [ 1.111314] usbcore: registered new interface driver hiddev [ 1.124972] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input3 [ 1.125165] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:10.0-2/input0 [ 1.125193] usbcore: registered new interface driver usbhid [ 1.125285] usbhid: v2.6:USB HID core driver [ 1.200355] ata3.00: ATA-7: HDT722525DLA380, V44OA96A, max UDMA/133 [ 1.200358] ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 1.240352] ata3.00: configured for UDMA/133 [ 1.240490] scsi 2:0:0:0: Direct-Access ATA HDT722525DLA380 V44O PQ: 0 ANSI: 5 [ 1.240649] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.240826] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.240867] sd 2:0:0:0: [sda] Write Protect is off [ 1.240870] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.240892] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.241024] sda: sda1 sda2 sda3 [ 1.273511] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.390006] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 1.450008] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.569972] usb 3-2: configuration #1 chosen from 1 choice [ 1.588236] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input4 [ 1.588335] generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:10.1-2/input0 [ 1.616957] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.1/input/input5 [ 1.617057] generic-usb 0003:0A81:0101.0003: input,hidraw2: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:10.1-2/input1 [ 1.630591] ata4.00: ATA-8: ST3750330AS, SD1A, max UDMA/133 [ 1.630597] ata4.00: 1465149168 sectors, multi 1: LBA48 NCQ (depth 0/32) [ 1.670568] ata4.00: configured for UDMA/133 [ 1.670703] scsi 3:0:0:0: Direct-Access ATA ST3750330AS SD1A PQ: 0 ANSI: 5 [ 1.670847] sd 3:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 1.670958] sd 3:0:0:0: [sdb] Write Protect is off [ 1.670960] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.670981] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.671122] sdb: [ 1.671281] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 1.684859] sdb1 [ 1.685180] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2.010144] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 19.128706] Adding 4000176k swap on /dev/sda2. Priority:-1 extents:1 across:4000176k [ 19.146829] udev: starting version 151 [ 19.262965] lp: driver loaded but no devices found [ 19.298869] EDAC MC: Ver: 2.1.0 Feb 20 2010 [ 19.305372] Linux video capture interface: v2.00 [ 19.393113] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 19.618957] EDAC amd64_edac: Ver: 3.2.0 Feb 20 2010 [ 19.619367] parport_pc 00:0b: reported by Plug and Play ACPI [ 19.619419] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 19.638399] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 19.638408] EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded. [ 19.638409] Either Enable ECC in the BIOS, or set 'ecc_enable_override'. [ 19.638410] Also, use of the override can cause unknown side effects. [ 19.638452] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 19.664673] vga16fb: initializing [ 19.664682] vga16fb: mapped to 0xffff8800000a0000 [ 19.664873] fb0: VGA16 VGA frame buffer device [ 19.683504] ppdev: user-space parallel port driver [ 19.695350] type=1505 audit(1266773344.611:2): operation="profile_load" pid=530 name="/sbin/dhclient3" [ 19.695601] type=1505 audit(1266773344.611:3): operation="profile_load" pid=530 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 19.695738] type=1505 audit(1266773344.611:4): operation="profile_load" pid=530 name="/usr/lib/connman/scripts/dhclient-script" [ 19.700268] lp0: using parport0 (interrupt-driven). [ 19.718435] type=1505 audit(1266773344.631:5): operation="profile_load" pid=552 name="/usr/sbin/ntpd" [ 19.766107] saa7130/34: v4l2 driver version 0.2.15 loaded [ 19.774975] alloc irq_desc for 17 on node 0 [ 19.774980] alloc kstat_irqs on node 0 [ 19.774991] saa7134 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 19.774999] saa7133[0]: found at 0000:00:09.0, rev: 209, irq: 17, latency: 32, mmio: 0xf3000000 [ 19.775006] saa7133[0]: subsystem: 1131:0000, board: V-Stream Studio TV Terminator [card=65,insmod option] [ 19.775027] saa7133[0]: board init: gpio is 40 [ 19.775312] input: saa7134 IR (V-Stream Studio TV as /devices/pci0000:00/0000:00:09.0/input/input6 [ 19.775445] IRQ 17/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 19.880304] saa7133[0]: Huh, no eeprom present (err=-5)? [ 19.880310] i2c i2c-1: Invalid 7-bit address 0x7a [ 19.980080] nvidia: module license 'NVIDIA' taints kernel. [ 19.980086] Disabling lock debugging due to kernel taint [ 20.358550] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 20.880574] tuner 1-004b: chip found @ 0x96 (saa7133[0]) [ 20.943998] Console: switching to colour frame buffer device 80x30 [ 20.955108] alloc irq_desc for 16 on node 0 [ 20.955113] alloc kstat_irqs on node 0 [ 20.955123] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.955134] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 20.956434] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.03 Mon Feb 1 18:33:51 PST 2010 [ 21.080015] tda829x 1-004b: setting tuner address to 61 [ 21.210011] tda829x 1-004b: type set to tda8290+75a [ 26.409321] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 26.446693] type=1505 audit(1266773351.361:6): operation="profile_load" pid=791 name="/usr/share/gdm/guest-session/Xsession" [ 26.456064] type=1505 audit(1266773351.371:7): operation="profile_replace" pid=793 name="/sbin/dhclient3" [ 26.456334] type=1505 audit(1266773351.371:8): operation="profile_replace" pid=793 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 26.456485] type=1505 audit(1266773351.371:9): operation="profile_replace" pid=793 name="/usr/lib/connman/scripts/dhclient-script" [ 26.468923] type=1505 audit(1266773351.381:10): operation="profile_load" pid=796 name="/usr/bin/evince" [ 26.485379] type=1505 audit(1266773351.401:11): operation="profile_load" pid=796 name="/usr/bin/evince-previewer" [ 26.487434] type=1505 audit(1266773351.401:12): operation="profile_load" pid=796 name="/usr/bin/evince-thumbnailer" [ 26.498680] type=1505 audit(1266773351.411:13): operation="profile_load" pid=799 name="/usr/lib/libvirt/virt-aa-helper" [ 26.512786] type=1505 audit(1266773351.431:14): operation="profile_load" pid=800 name="/usr/lib/cups/backend/cups-pdf" [ 26.513098] type=1505 audit(1266773351.431:15): operation="profile_load" pid=800 name="/usr/sbin/cupsd" [ 27.090173] saa7133[0]: registered device video0 [v4l2] [ 27.090199] saa7133[0]: registered device vbi0 [ 27.090224] saa7133[0]: registered device radio0 [ 27.100627] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 [ 27.100636] alloc irq_desc for 22 on node 0 [ 27.100639] alloc kstat_irqs on node 0 [ 27.100650] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22 [ 27.100820] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 [ 27.110814] saa7134 ALSA driver for DMA sound loaded [ 27.110836] IRQ 17/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 27.110863] saa7133[0]/alsa: saa7133[0] at 0xf3000000 irq 17 registered as card -2 [ 27.205586] Bridge firewalling registered [ 27.245537] virbr0: starting userspace STP failed, starting kernel STP [ 27.272189] ip_tables: (C) 2000-2006 Netfilter Core Team [ 27.432108] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 27.434097] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 27.434102] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 27.434104] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 27.630265] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 27.630270] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance [ 27.630271] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 27.630273] vboxdrv: the usage of hardware performance counters by [ 27.630274] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 27.630278] vboxdrv: Found 1 processor cores. [ 27.631525] VBoxDrv: dbg - g_abExecMemory=ffffffffa0e389c0 [ 27.632690] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 27.632694] vboxdrv: Successfully loaded version 3.1.4 (interface 0x00100001). [ 27.790528] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge [ 27.790543] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode [ 27.790604] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode [ 28.193454] vboxnetflt: no symbol version for RTSemFastMutexCreate [ 28.193459] vboxnetflt: Unknown symbol RTSemFastMutexCreate [ 28.193566] vboxnetflt: no symbol version for RTR0Init [ 28.193567] vboxnetflt: Unknown symbol RTR0Init [ 28.193747] vboxnetflt: no symbol version for SUPDrvLinuxIDC [ 28.193749] vboxnetflt: Unknown symbol SUPDrvLinuxIDC [ 28.193857] vboxnetflt: no symbol version for RTSpinlockRelease [ 28.193858] vboxnetflt: Unknown symbol RTSpinlockRelease [ 28.193927] vboxnetflt: no symbol version for RTSemEventDestroy [ 28.193929] vboxnetflt: Unknown symbol RTSemEventDestroy [ 28.194001] vboxnetflt: no symbol version for RTUuidFromStr [ 28.194002] vboxnetflt: Unknown symbol RTUuidFromStr [ 28.194071] vboxnetflt: no symbol version for RTSemEventSignal [ 28.194073] vboxnetflt: Unknown symbol RTSemEventSignal [ 28.194142] vboxnetflt: no symbol version for RTErrConvertFromErrno [ 28.194144] vboxnetflt: Unknown symbol RTErrConvertFromErrno [ 28.194250] vboxnetflt: no symbol version for RTSemEventWait [ 28.194252] vboxnetflt: Unknown symbol RTSemEventWait [ 28.194319] vboxnetflt: no symbol version for RTMemAllocZ [ 28.194321] vboxnetflt: Unknown symbol RTMemAllocZ [ 28.194392] vboxnetflt: no symbol version for RTErrConvertToErrno [ 28.194394] vboxnetflt: Unknown symbol RTErrConvertToErrno [ 28.194500] vboxnetflt: no symbol version for RTSemFastMutexRequest [ 28.194502] vboxnetflt: Unknown symbol RTSemFastMutexRequest [ 28.194571] vboxnetflt: no symbol version for RTSpinlockCreate [ 28.194573] vboxnetflt: Unknown symbol RTSpinlockCreate [ 28.194682] vboxnetflt: no symbol version for RTLogRelDefaultInstance [ 28.194684] vboxnetflt: Unknown symbol RTLogRelDefaultInstance [ 28.194752] vboxnetflt: no symbol version for RTMemFree [ 28.194753] vboxnetflt: Unknown symbol RTMemFree [ 28.194857] vboxnetflt: no symbol version for RTSemFastMutexRelease [ 28.194859] vboxnetflt: Unknown symbol RTSemFastMutexRelease [ 28.195014] vboxnetflt: no symbol version for RTTimeNanoTS [ 28.195015] vboxnetflt: Unknown symbol RTTimeNanoTS [ 28.195278] vboxnetflt: no symbol version for RTSpinlockDestroy [ 28.195279] vboxnetflt: Unknown symbol RTSpinlockDestroy [ 28.195410] vboxnetflt: no symbol version for RTSemEventCreate [ 28.195412] vboxnetflt: Unknown symbol RTSemEventCreate [ 28.195481] vboxnetflt: no symbol version for RTSpinlockAcquire [ 28.195482] vboxnetflt: Unknown symbol RTSpinlockAcquire [ 28.195553] vboxnetflt: no symbol version for RTLogLoggerEx [ 28.195554] vboxnetflt: Unknown symbol RTLogLoggerEx [ 28.195659] vboxnetflt: no symbol version for RTR0Term [ 28.195661] vboxnetflt: Unknown symbol RTR0Term [ 28.195813] vboxnetflt: no symbol version for RTUuidCompareStr [ 28.195814] vboxnetflt: Unknown symbol RTUuidCompareStr [ 28.195942] vboxnetflt: no symbol version for RTSemFastMutexDestroy [ 28.195943] vboxnetflt: Unknown symbol RTSemFastMutexDestroy [ 28.459595] lo: Disabled Privacy Extensions [ 37.170029] eth0: no IPv6 routers present [ 89.420218] Marking TSC unstable due to cpufreq changes [ 89.420305] Switching to clocksource acpi_pm [ 1266.030084] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 1266.238762] usb 5-1: configuration #1 chosen from 1 choice [ 1266.297852] Initializing USB Mass Storage driver... [ 1266.304101] scsi4 : SCSI emulation for USB Mass Storage devices [ 1266.313951] usbcore: registered new interface driver usb-storage [ 1266.313956] USB Mass Storage support registered. [ 1266.327342] usb-storage: device found at 2 [ 1266.327346] usb-storage: waiting for device to settle before scanning [ 1271.330560] usb-storage: device scan complete [ 1271.334740] scsi scan: INQUIRY result too short (5), using 36 [ 1271.334751] scsi 4:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1271.335531] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 1271.357726] sd 4:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1271.362025] sd 4:0:0:0: [sdc] Write Protect is off [ 1271.362032] sd 4:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1271.362036] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 1271.375752] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 1271.375764] sdc: [ 1271.409106] sd 4:0:0:0: [sdc] Assuming drive cache: write through [ 1271.409117] sd 4:0:0:0: [sdc] Attached SCSI removable disk [ 1273.160105] usb 5-1: USB disconnect, address 2 [ 1284.350078] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 1284.559861] usb 5-1: configuration #1 chosen from 1 choice [ 1284.577147] scsi5 : SCSI emulation for USB Mass Storage devices [ 1284.583661] usb-storage: device found at 3 [ 1284.583665] usb-storage: waiting for device to settle before scanning [ 1289.584832] usb-storage: device scan complete [ 1289.587932] scsi scan: INQUIRY result too short (5), using 36 [ 1289.587944] scsi 5:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1289.590990] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 1289.610940] sd 5:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1289.613903] sd 5:0:0:0: [sdc] Write Protect is off [ 1289.613909] sd 5:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1289.613912] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 1289.626911] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 1289.626923] sdc: [ 1289.654935] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 1289.654943] sd 5:0:0:0: [sdc] Attached SCSI removable disk [ 1291.400186] usb 5-1: USB disconnect, address 3 [ 1302.610308] usb 5-1: new full speed USB device using uhci_hcd and address 4 [ 1302.818231] usb 5-1: configuration #1 chosen from 1 choice [ 1302.846167] scsi6 : SCSI emulation for USB Mass Storage devices [ 1302.854220] usb-storage: device found at 4 [ 1302.854224] usb-storage: waiting for device to settle before scanning [ 1307.855582] usb-storage: device scan complete [ 1307.862941] scsi scan: INQUIRY result too short (5), using 36 [ 1307.862952] scsi 6:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1307.865680] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 1307.883337] sd 6:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1307.886907] sd 6:0:0:0: [sdc] Write Protect is off [ 1307.886915] sd 6:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1307.886918] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 1307.901306] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 1307.901318] sdc: [ 1307.924422] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 1307.924432] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 1309.650807] usb 5-1: USB disconnect, address 4 [ 1320.860080] usb 5-1: new full speed USB device using uhci_hcd and address 5 [ 1321.070205] usb 5-1: configuration #1 chosen from 1 choice [ 1321.088808] scsi7 : SCSI emulation for USB Mass Storage devices [ 1321.094173] usb-storage: device found at 5 [ 1321.094177] usb-storage: waiting for device to settle before scanning [ 1326.091264] usb-storage: device scan complete [ 1326.094219] scsi scan: INQUIRY result too short (5), using 36 [ 1326.094227] scsi 7:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1326.099944] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 1326.125234] sd 7:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1326.128220] sd 7:0:0:0: [sdc] Write Protect is off [ 1326.128228] sd 7:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1326.128232] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 1326.141235] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 1326.141248] sdc: [ 1326.165215] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 1326.165226] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 1327.920098] usb 5-1: USB disconnect, address 5 [ 1339.220059] usb 5-1: new full speed USB device using uhci_hcd and address 6 [ 1339.428685] usb 5-1: configuration #1 chosen from 1 choice [ 1339.454311] scsi8 : SCSI emulation for USB Mass Storage devices [ 1339.462626] usb-storage: device found at 6 [ 1339.462630] usb-storage: waiting for device to settle before scanning [ 1344.466034] usb-storage: device scan complete [ 1344.470301] scsi scan: INQUIRY result too short (5), using 36 [ 1344.470312] scsi 8:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1344.472856] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 1344.497621] sd 8:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1344.500749] sd 8:0:0:0: [sdc] Write Protect is off [ 1344.500757] sd 8:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1344.500760] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 1344.514906] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 1344.514918] sdc: [ 1344.537738] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 1344.537748] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 1346.270095] usb 5-1: USB disconnect, address 6 [ 1357.570065] usb 5-1: new full speed USB device using uhci_hcd and address 7 [ 1357.778293] usb 5-1: configuration #1 chosen from 1 choice [ 1357.799442] scsi9 : SCSI emulation for USB Mass Storage devices [ 1357.814706] usb-storage: device found at 7 [ 1357.814710] usb-storage: waiting for device to settle before scanning [ 1362.811408] usb-storage: device scan complete [ 1362.816467] scsi scan: INQUIRY result too short (5), using 36 [ 1362.816478] scsi 9:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1362.818921] sd 9:0:0:0: Attached scsi generic sg3 type 0 [ 1362.826427] sd 9:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1362.831249] sd 9:0:0:0: [sdc] Write Protect is off [ 1362.831257] sd 9:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1362.831260] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 1362.844331] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 1362.844339] sdc: [ 1362.866373] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 1362.866381] sd 9:0:0:0: [sdc] Attached SCSI removable disk [ 1364.590174] usb 5-1: USB disconnect, address 7 [ 1375.900063] usb 5-1: new full speed USB device using uhci_hcd and address 8 [ 1376.108367] usb 5-1: configuration #1 chosen from 1 choice [ 1376.132507] scsi10 : SCSI emulation for USB Mass Storage devices [ 1376.138731] usb-storage: device found at 8 [ 1376.138735] usb-storage: waiting for device to settle before scanning [ 1381.138964] usb-storage: device scan complete [ 1381.142437] scsi scan: INQUIRY result too short (5), using 36 [ 1381.142447] scsi 10:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1381.145474] sd 10:0:0:0: Attached scsi generic sg3 type 0 [ 1381.164402] sd 10:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1381.167406] sd 10:0:0:0: [sdc] Write Protect is off [ 1381.167484] sd 10:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1381.167487] sd 10:0:0:0: [sdc] Assuming drive cache: write through [ 1381.184402] sd 10:0:0:0: [sdc] Assuming drive cache: write through [ 1381.184413] sdc: [ 1381.207400] sd 10:0:0:0: [sdc] Assuming drive cache: write through [ 1381.207410] sd 10:0:0:0: [sdc] Attached SCSI removable disk [ 1382.940119] usb 5-1: USB disconnect, address 8 [ 1394.260054] usb 5-1: new full speed USB device using uhci_hcd and address 9 [ 1394.468453] usb 5-1: configuration #1 chosen from 1 choice [ 1394.490763] scsi11 : SCSI emulation for USB Mass Storage devices [ 1394.493152] usb-storage: device found at 9 [ 1394.493156] usb-storage: waiting for device to settle before scanning [ 1399.495653] usb-storage: device scan complete [ 1399.498460] scsi scan: INQUIRY result too short (5), using 36 [ 1399.498469] scsi 11:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1399.498957] sd 11:0:0:0: Attached scsi generic sg3 type 0 [ 1399.517461] sd 11:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1399.522461] sd 11:0:0:0: [sdc] Write Protect is off [ 1399.522465] sd 11:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1399.522468] sd 11:0:0:0: [sdc] Assuming drive cache: write through [ 1399.538439] sd 11:0:0:0: [sdc] Assuming drive cache: write through [ 1399.538450] sdc: [ 1399.560469] sd 11:0:0:0: [sdc] Assuming drive cache: write through [ 1399.560479] sd 11:0:0:0: [sdc] Attached SCSI removable disk [ 1401.280217] usb 5-1: USB disconnect, address 9 [ 1412.590070] usb 5-1: new full speed USB device using uhci_hcd and address 10 [ 1412.800169] usb 5-1: configuration #1 chosen from 1 choice [ 1412.821647] scsi12 : SCSI emulation for USB Mass Storage devices [ 1412.826221] usb-storage: device found at 10 [ 1412.826225] usb-storage: waiting for device to settle before scanning [ 1417.832002] usb-storage: device scan complete [ 1417.835218] scsi scan: INQUIRY result too short (5), using 36 [ 1417.835229] scsi 12:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1417.842917] sd 12:0:0:0: Attached scsi generic sg3 type 0 [ 1417.866581] sd 12:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1417.869208] sd 12:0:0:0: [sdc] Write Protect is off [ 1417.869216] sd 12:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1417.869220] sd 12:0:0:0: [sdc] Assuming drive cache: write through [ 1417.882436] sd 12:0:0:0: [sdc] Assuming drive cache: write through [ 1417.882448] sdc: [ 1417.905209] sd 12:0:0:0: [sdc] Assuming drive cache: write through [ 1417.905219] sd 12:0:0:0: [sdc] Attached SCSI removable disk [ 1419.640095] usb 5-1: USB disconnect, address 10 [ 1431.070071] usb 5-1: new full speed USB device using uhci_hcd and address 11 [ 1431.279098] usb 5-1: configuration #1 chosen from 1 choice [ 1431.300287] scsi13 : SCSI emulation for USB Mass Storage devices [ 1431.304579] usb-storage: device found at 11 [ 1431.304583] usb-storage: waiting for device to settle before scanning [ 1436.305962] usb-storage: device scan complete [ 1436.309184] scsi scan: INQUIRY result too short (5), using 36 [ 1436.309197] scsi 13:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1436.315327] sd 13:0:0:0: Attached scsi generic sg3 type 0 [ 1436.328180] sd 13:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1436.331165] sd 13:0:0:0: [sdc] Write Protect is off [ 1436.331170] sd 13:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1436.331174] sd 13:0:0:0: [sdc] Assuming drive cache: write through [ 1436.344171] sd 13:0:0:0: [sdc] Assuming drive cache: write through [ 1436.344181] sdc: [ 1436.369156] sd 13:0:0:0: [sdc] Assuming drive cache: write through [ 1436.369166] sd 13:0:0:0: [sdc] Attached SCSI removable disk [ 1438.090118] usb 5-1: USB disconnect, address 11 [ 1449.410054] usb 5-1: new full speed USB device using uhci_hcd and address 12 [ 1449.617572] usb 5-1: configuration #1 chosen from 1 choice [ 1449.639100] scsi14 : SCSI emulation for USB Mass Storage devices [ 1449.643691] usb-storage: device found at 12 [ 1449.643695] usb-storage: waiting for device to settle before scanning [ 1454.645268] usb-storage: device scan complete [ 1454.647603] scsi scan: INQUIRY result too short (5), using 36 [ 1454.647612] scsi 14:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1454.653334] sd 14:0:0:0: Attached scsi generic sg3 type 0 [ 1454.665593] sd 14:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1454.668556] sd 14:0:0:0: [sdc] Write Protect is off [ 1454.668560] sd 14:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1454.668563] sd 14:0:0:0: [sdc] Assuming drive cache: write through [ 1454.681572] sd 14:0:0:0: [sdc] Assuming drive cache: write through [ 1454.681582] sdc: [ 1454.704606] sd 14:0:0:0: [sdc] Assuming drive cache: write through [ 1454.704614] sd 14:0:0:0: [sdc] Attached SCSI removable disk [ 1456.400119] usb 5-1: USB disconnect, address 12 [ 1467.710053] usb 5-1: new full speed USB device using uhci_hcd and address 13 [ 1467.918380] usb 5-1: configuration #1 chosen from 1 choice [ 1467.940075] scsi15 : SCSI emulation for USB Mass Storage devices [ 1467.951277] usb-storage: device found at 13 [ 1467.951281] usb-storage: waiting for device to settle before scanning [ 1472.951531] usb-storage: device scan complete [ 1472.954410] scsi scan: INQUIRY result too short (5), using 36 [ 1472.954421] scsi 15:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1472.958272] sd 15:0:0:0: Attached scsi generic sg3 type 0 [ 1472.975835] sd 15:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1472.978467] sd 15:0:0:0: [sdc] Write Protect is off [ 1472.978476] sd 15:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1472.978480] sd 15:0:0:0: [sdc] Assuming drive cache: write through [ 1472.992865] sd 15:0:0:0: [sdc] Assuming drive cache: write through [ 1472.992876] sdc: [ 1473.015397] sd 15:0:0:0: [sdc] Assuming drive cache: write through [ 1473.015408] sd 15:0:0:0: [sdc] Attached SCSI removable disk [ 1474.700094] usb 5-1: USB disconnect, address 13 [ 1486.020072] usb 5-1: new full speed USB device using uhci_hcd and address 14 [ 1486.228454] usb 5-1: configuration #1 chosen from 1 choice [ 1486.245886] scsi16 : SCSI emulation for USB Mass Storage devices [ 1486.249825] usb-storage: device found at 14 [ 1486.249829] usb-storage: waiting for device to settle before scanning [ 1491.248099] usb-storage: device scan complete [ 1491.251724] scsi scan: INQUIRY result too short (5), using 36 [ 1491.251738] scsi 16:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1491.266352] sd 16:0:0:0: Attached scsi generic sg3 type 0 [ 1491.286378] sd 16:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1491.289364] sd 16:0:0:0: [sdc] Write Protect is off [ 1491.289372] sd 16:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1491.289375] sd 16:0:0:0: [sdc] Assuming drive cache: write through [ 1491.301382] sd 16:0:0:0: [sdc] Assuming drive cache: write through [ 1491.301394] sdc: [ 1491.323361] sd 16:0:0:0: [sdc] Assuming drive cache: write through [ 1491.323371] sd 16:0:0:0: [sdc] Attached SCSI removable disk [ 1493.060106] usb 5-1: USB disconnect, address 14 [ 1504.370073] usb 5-1: new full speed USB device using uhci_hcd and address 15 [ 1504.579071] usb 5-1: configuration #1 chosen from 1 choice [ 1504.596349] scsi17 : SCSI emulation for USB Mass Storage devices [ 1504.601030] usb-storage: device found at 15 [ 1504.601034] usb-storage: waiting for device to settle before scanning [ 1509.610043] usb-storage: device scan complete [ 1509.613089] scsi scan: INQUIRY result too short (5), using 36 [ 1509.613101] scsi 17:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1509.621563] sd 17:0:0:0: Attached scsi generic sg3 type 0 [ 1509.638074] sd 17:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1509.642722] sd 17:0:0:0: [sdc] Write Protect is off [ 1509.642731] sd 17:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1509.642735] sd 17:0:0:0: [sdc] Assuming drive cache: write through [ 1509.658203] sd 17:0:0:0: [sdc] Assuming drive cache: write through [ 1509.658216] sdc: [ 1509.681064] sd 17:0:0:0: [sdc] Assuming drive cache: write through [ 1509.681072] sd 17:0:0:0: [sdc] Attached SCSI removable disk [ 1511.370136] usb 5-1: USB disconnect, address 15 [ 1522.680055] usb 5-1: new full speed USB device using uhci_hcd and address 16 [ 1522.889682] usb 5-1: configuration #1 chosen from 1 choice [ 1522.920243] scsi18 : SCSI emulation for USB Mass Storage devices [ 1522.926236] usb-storage: device found at 16 [ 1522.926240] usb-storage: waiting for device to settle before scanning [ 1527.921444] usb-storage: device scan complete [ 1527.924400] scsi scan: INQUIRY result too short (5), using 36 [ 1527.924408] scsi 18:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1527.928399] sd 18:0:0:0: Attached scsi generic sg3 type 0 [ 1527.933412] sd 18:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1527.940287] sd 18:0:0:0: [sdc] Write Protect is off [ 1527.940296] sd 18:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1527.940300] sd 18:0:0:0: [sdc] Assuming drive cache: write through [ 1527.955297] sd 18:0:0:0: [sdc] Assuming drive cache: write through [ 1527.955310] sdc: [ 1527.981498] sd 18:0:0:0: [sdc] Assuming drive cache: write through [ 1527.981510] sd 18:0:0:0: [sdc] Attached SCSI removable disk [ 1529.720830] usb 5-1: USB disconnect, address 16 [ 1540.990394] usb 5-1: new full speed USB device using uhci_hcd and address 17 [ 1541.199172] usb 5-1: configuration #1 chosen from 1 choice [ 1541.220399] scsi19 : SCSI emulation for USB Mass Storage devices [ 1541.230980] usb-storage: device found at 17 [ 1541.230984] usb-storage: waiting for device to settle before scanning [ 1546.240066] usb-storage: device scan complete [ 1546.246427] scsi scan: INQUIRY result too short (5), using 36 [ 1546.246438] scsi 19:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1546.250556] sd 19:0:0:0: Attached scsi generic sg3 type 0 [ 1546.271358] sd 19:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1546.275796] sd 19:0:0:0: [sdc] Write Protect is off [ 1546.275804] sd 19:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1546.275807] sd 19:0:0:0: [sdc] Assuming drive cache: write through [ 1546.291742] sd 19:0:0:0: [sdc] Assuming drive cache: write through [ 1546.291755] sdc: [ 1546.314179] sd 19:0:0:0: [sdc] Assuming drive cache: write through [ 1546.314190] sd 19:0:0:0: [sdc] Attached SCSI removable disk [ 1548.050086] usb 5-1: USB disconnect, address 17 [ 1559.230053] usb 5-1: new full speed USB device using uhci_hcd and address 18 [ 1559.439137] usb 5-1: configuration #1 chosen from 1 choice [ 1559.458756] scsi20 : SCSI emulation for USB Mass Storage devices [ 1559.462037] usb-storage: device found at 18 [ 1559.462041] usb-storage: waiting for device to settle before scanning [ 1564.461197] usb-storage: device scan complete [ 1564.464159] scsi scan: INQUIRY result too short (5), using 36 [ 1564.464167] scsi 20:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1564.466586] sd 20:0:0:0: Attached scsi generic sg3 type 0 [ 1564.476223] sd 20:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1564.479161] sd 20:0:0:0: [sdc] Write Protect is off [ 1564.479169] sd 20:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1564.479172] sd 20:0:0:0: [sdc] Assuming drive cache: write through [ 1564.494128] sd 20:0:0:0: [sdc] Assuming drive cache: write through [ 1564.494141] sdc: [ 1564.518165] sd 20:0:0:0: [sdc] Assuming drive cache: write through [ 1564.518173] sd 20:0:0:0: [sdc] Attached SCSI removable disk [ 1566.220111] usb 5-1: USB disconnect, address 18 [ 1582.940045] usb 5-1: new full speed USB device using uhci_hcd and address 19 [ 1583.150170] usb 5-1: configuration #1 chosen from 1 choice [ 1583.165338] scsi21 : SCSI emulation for USB Mass Storage devices [ 1583.167240] usb-storage: device found at 19 [ 1583.167243] usb-storage: waiting for device to settle before scanning [ 1588.164532] usb-storage: device scan complete [ 1588.167198] scsi scan: INQUIRY result too short (5), using 36 [ 1588.167210] scsi 21:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1588.171857] sd 21:0:0:0: Attached scsi generic sg3 type 0 [ 1588.188163] sd 21:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1588.191168] sd 21:0:0:0: [sdc] Write Protect is off [ 1588.191176] sd 21:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1588.191179] sd 21:0:0:0: [sdc] Assuming drive cache: write through [ 1588.205176] sd 21:0:0:0: [sdc] Assuming drive cache: write through [ 1588.205188] sdc: [ 1588.224168] sd 21:0:0:0: [sdc] Assuming drive cache: write through [ 1588.224179] sd 21:0:0:0: [sdc] Attached SCSI removable disk [ 1589.900088] usb 5-1: USB disconnect, address 19 [ 1601.110063] usb 5-1: new full speed USB device using uhci_hcd and address 20 [ 1601.317171] usb 5-1: configuration #1 chosen from 1 choice [ 1601.335313] scsi22 : SCSI emulation for USB Mass Storage devices [ 1601.337950] usb-storage: device found at 20 [ 1601.337955] usb-storage: waiting for device to settle before scanning [ 1606.339336] usb-storage: device scan complete [ 1606.343413] scsi scan: INQUIRY result too short (5), using 36 [ 1606.343427] scsi 22:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1606.349707] sd 22:0:0:0: Attached scsi generic sg3 type 0 [ 1606.366210] sd 22:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1606.369165] sd 22:0:0:0: [sdc] Write Protect is off [ 1606.369170] sd 22:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1606.369173] sd 22:0:0:0: [sdc] Assuming drive cache: write through [ 1606.383161] sd 22:0:0:0: [sdc] Assuming drive cache: write through [ 1606.383171] sdc: [ 1606.406195] sd 22:0:0:0: [sdc] Assuming drive cache: write through [ 1606.406206] sd 22:0:0:0: [sdc] Attached SCSI removable disk [ 1608.110689] usb 5-1: USB disconnect, address 20 [ 1619.310053] usb 5-1: new full speed USB device using uhci_hcd and address 21 [ 1619.520240] usb 5-1: configuration #1 chosen from 1 choice [ 1619.547222] scsi23 : SCSI emulation for USB Mass Storage devices [ 1619.554555] usb-storage: device found at 21 [ 1619.554559] usb-storage: waiting for device to settle before scanning [ 1624.558289] usb-storage: device scan complete [ 1624.561163] scsi scan: INQUIRY result too short (5), using 36 [ 1624.561173] scsi 23:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1624.565550] sd 23:0:0:0: Attached scsi generic sg3 type 0 [ 1624.589175] sd 23:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1624.592208] sd 23:0:0:0: [sdc] Write Protect is off [ 1624.592216] sd 23:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1624.592220] sd 23:0:0:0: [sdc] Assuming drive cache: write through [ 1624.605570] sd 23:0:0:0: [sdc] Assuming drive cache: write through [ 1624.605581] sdc: [ 1624.629150] sd 23:0:0:0: [sdc] Assuming drive cache: write through [ 1624.629158] sd 23:0:0:0: [sdc] Attached SCSI removable disk [ 1626.330127] usb 5-1: USB disconnect, address 21 [ 1637.520049] usb 5-1: new full speed USB device using uhci_hcd and address 22 [ 1637.730153] usb 5-1: configuration #1 chosen from 1 choice [ 1637.744957] scsi24 : SCSI emulation for USB Mass Storage devices [ 1637.749271] usb-storage: device found at 22 [ 1637.749274] usb-storage: waiting for device to settle before scanning [ 1642.743515] usb-storage: device scan complete [ 1642.746175] scsi scan: INQUIRY result too short (5), using 36 [ 1642.746183] scsi 24:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1642.748981] sd 24:0:0:0: Attached scsi generic sg3 type 0 [ 1642.762107] sd 24:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1642.768105] sd 24:0:0:0: [sdc] Write Protect is off [ 1642.768127] sd 24:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1642.768131] sd 24:0:0:0: [sdc] Assuming drive cache: write through [ 1642.781309] sd 24:0:0:0: [sdc] Assuming drive cache: write through [ 1642.781321] sdc: [ 1642.806293] sd 24:0:0:0: [sdc] Assuming drive cache: write through [ 1642.806301] sd 24:0:0:0: [sdc] Attached SCSI removable disk [ 1644.560181] usb 5-1: USB disconnect, address 22 [ 1655.760056] usb 5-1: new full speed USB device using uhci_hcd and address 23 [ 1655.968283] usb 5-1: configuration #1 chosen from 1 choice [ 1656.002867] scsi25 : SCSI emulation for USB Mass Storage devices [ 1656.006437] usb-storage: device found at 23 [ 1656.006442] usb-storage: waiting for device to settle before scanning [ 1661.003499] usb-storage: device scan complete [ 1661.006133] scsi scan: INQUIRY result too short (5), using 36 [ 1661.006141] scsi 25:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1661.009429] sd 25:0:0:0: Attached scsi generic sg3 type 0 [ 1661.019801] sd 25:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1661.023077] sd 25:0:0:0: [sdc] Write Protect is off [ 1661.023085] sd 25:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1661.023088] sd 25:0:0:0: [sdc] Assuming drive cache: write through [ 1661.037818] sd 25:0:0:0: [sdc] Assuming drive cache: write through [ 1661.037830] sdc: [ 1661.060151] sd 25:0:0:0: [sdc] Assuming drive cache: write through [ 1661.060161] sd 25:0:0:0: [sdc] Attached SCSI removable disk [ 1662.790244] usb 5-1: USB disconnect, address 23 [ 1673.980096] usb 5-1: new full speed USB device using uhci_hcd and address 24 [ 1674.189150] usb 5-1: configuration #1 chosen from 1 choice [ 1674.210343] scsi26 : SCSI emulation for USB Mass Storage devices [ 1674.218770] usb-storage: device found at 24 [ 1674.218774] usb-storage: waiting for device to settle before scanning [ 1679.219546] usb-storage: device scan complete [ 1679.223133] scsi scan: INQUIRY result too short (5), using 36 [ 1679.223145] scsi 26:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1679.225802] sd 26:0:0:0: Attached scsi generic sg3 type 0 [ 1679.237590] sd 26:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1679.242525] sd 26:0:0:0: [sdc] Write Protect is off [ 1679.242534] sd 26:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1679.242538] sd 26:0:0:0: [sdc] Assuming drive cache: write through [ 1679.254118] sd 26:0:0:0: [sdc] Assuming drive cache: write through [ 1679.254130] sdc: [ 1679.280118] sd 26:0:0:0: [sdc] Assuming drive cache: write through [ 1679.280129] sd 26:0:0:0: [sdc] Attached SCSI removable disk [ 1680.990629] usb 5-1: USB disconnect, address 24 [ 1692.200056] usb 5-1: new full speed USB device using uhci_hcd and address 25 [ 1692.409341] usb 5-1: configuration #1 chosen from 1 choice [ 1692.429737] scsi27 : SCSI emulation for USB Mass Storage devices [ 1692.439807] usb-storage: device found at 25 [ 1692.439810] usb-storage: waiting for device to settle before scanning [ 1697.437064] usb-storage: device scan complete [ 1697.440588] scsi scan: INQUIRY result too short (5), using 36 [ 1697.440600] scsi 27:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1697.443899] sd 27:0:0:0: Attached scsi generic sg3 type 0 [ 1697.456491] sd 27:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1697.460380] sd 27:0:0:0: [sdc] Write Protect is off [ 1697.460389] sd 27:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1697.460392] sd 27:0:0:0: [sdc] Assuming drive cache: write through [ 1697.473156] sd 27:0:0:0: [sdc] Assuming drive cache: write through [ 1697.473168] sdc: [ 1697.497152] sd 27:0:0:0: [sdc] Assuming drive cache: write through [ 1697.497163] sd 27:0:0:0: [sdc] Attached SCSI removable disk [ 1699.190117] usb 5-1: USB disconnect, address 25 [ 1710.390442] usb 5-1: new full speed USB device using uhci_hcd and address 26 [ 1710.598213] usb 5-1: configuration #1 chosen from 1 choice [ 1710.615700] scsi28 : SCSI emulation for USB Mass Storage devices [ 1710.623515] usb-storage: device found at 26 [ 1710.623519] usb-storage: waiting for device to settle before scanning [ 1715.625641] usb-storage: device scan complete [ 1715.628596] scsi scan: INQUIRY result too short (5), using 36 [ 1715.628607] scsi 28:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1715.635873] sd 28:0:0:0: Attached scsi generic sg3 type 0 [ 1715.649803] sd 28:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1715.652133] sd 28:0:0:0: [sdc] Write Protect is off [ 1715.652140] sd 28:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1715.652144] sd 28:0:0:0: [sdc] Assuming drive cache: write through [ 1715.664134] sd 28:0:0:0: [sdc] Assuming drive cache: write through [ 1715.664146] sdc: [ 1715.685165] sd 28:0:0:0: [sdc] Assuming drive cache: write through [ 1715.685176] sd 28:0:0:0: [sdc] Attached SCSI removable disk [ 1717.360118] usb 5-1: USB disconnect, address 26 [ 1728.560153] usb 5-1: new full speed USB device using uhci_hcd and address 27 [ 1728.769263] usb 5-1: configuration #1 chosen from 1 choice [ 1728.789595] scsi29 : SCSI emulation for USB Mass Storage devices [ 1728.793965] usb-storage: device found at 27 [ 1728.793970] usb-storage: waiting for device to settle before scanning [ 1733.791286] usb-storage: device scan complete [ 1733.794257] scsi scan: INQUIRY result too short (5), using 36 [ 1733.794268] scsi 29:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1733.796657] sd 29:0:0:0: Attached scsi generic sg3 type 0 [ 1733.805591] sd 29:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1733.808284] sd 29:0:0:0: [sdc] Write Protect is off [ 1733.808292] sd 29:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1733.808295] sd 29:0:0:0: [sdc] Assuming drive cache: write through [ 1733.821793] sd 29:0:0:0: [sdc] Assuming drive cache: write through [ 1733.821805] sdc: [ 1733.845318] sd 29:0:0:0: [sdc] Assuming drive cache: write through [ 1733.845329] sd 29:0:0:0: [sdc] Attached SCSI removable disk [ 1735.580099] usb 5-1: USB disconnect, address 27 [ 1746.770080] usb 5-1: new full speed USB device using uhci_hcd and address 28 [ 1746.979180] usb 5-1: configuration #1 chosen from 1 choice [ 1747.000874] scsi30 : SCSI emulation for USB Mass Storage devices [ 1747.003486] usb-storage: device found at 28 [ 1747.003490] usb-storage: waiting for device to settle before scanning [ 1752.005921] usb-storage: device scan complete [ 1752.009173] scsi scan: INQUIRY result too short (5), using 36 [ 1752.009185] scsi 30:0:0:0: Direct-Access USB2.0 (FS) FLASH DISK 1.00 PQ: 0 ANSI: 0 CCS [ 1752.013750] sd 30:0:0:0: Attached scsi generic sg3 type 0 [ 1752.029193] sd 30:0:0:0: [sdc] 1019617 512-byte logical blocks: (522 MB/497 MiB) [ 1752.032178] sd 30:0:0:0: [sdc] Write Protect is off [ 1752.032186] sd 30:0:0:0: [sdc] Mode Sense: 00 c0 00 00 [ 1752.032190] sd 30:0:0:0: [sdc] Assuming drive cache: write through [ 1752.045156] sd 30:0:0:0: [sdc] Assuming drive cache: write through [ 1752.045168] sdc: [ 1752.070162] sd 30:0:0:0: [sdc] Assuming drive cache: write through [ 1752.070173] sd 30:0:0:0: [sdc] Attached SCSI removable disk [ 1753.760118] usb 5-1: USB disconnect, address 28